Tech Problem Aggregator

BSOD during Windows Update Configuration

Q: BSOD during Windows Update Configuration

Hi all,

Need some extra help here. I attempted to get the debugging tools to read the minidump files post-mortem, but can only get into safe mode, which doesn't help me. I've attached the zip of the output from the jcgriff2 app.

I'm not positive, but it may be related to an attempt to install Spanish & Japanese optional language packs to Windows 7 Ultimate installation alongside a recommended update.

Initially, it crashed during start up at the 'configuring windows' screen at 15% into it. Two system restores later to take me back two updates, and now it returns to the 'configuring windows' screen on startup and crashes at 0%. Not sure if additional system restores will do much good.

Thanks,

- Matt

A: BSOD during Windows Update Configuration

Seems to be related to your USB port/Device and your Nvidia Display drivers

- Remove any unnecessary USB device or plug it in another port

- Uninstall your Nvidia display drivers then use driver sweeper to remove leftover Nvidia files
Guru3D - Driver Sweeper

Then reinstall your display drivers: NVIDIA DRIVERS 260.89 WHQL

This was likely caused by the following module: usbhub.sys
Bugcheck code: 0xFE (0x8, 0x6, 0x5, 0xFFFFFA80067B9000)
Error: BUGCODE_USB_DRIVER

This was likely caused by the following module: nvlddmkm.sys
Bugcheck code: 0xA (0xFFFFFA800B0C1060, 0x2, 0x1, 0xFFFFF80002EDC84C)
Error: IRQL_NOT_LESS_OR_EQUAL

3 more replies
Answer Match 54.18%

hii have created a usb flash via rufus software for setup win 10 in uefi mode then boot my labtop via uefi and during windows instalation steps deleted my MBR partition's and create a new GPT partition after windows file copy and in finishing step an error apear's with this content :windows could not update the boot configuration installation cannot proceed.i tried another usb flash drive & reset bios to defult's but my problem not resolved.do you have any idea to resolve the problem ?thanks.

More replies
Answer Match 54.18%

i'm having problems starting up my windows vista.. when i turn my laptop on there's a screen that comes up showing
"configuration updates: stage 3 of 3 - 0% complete" and after a couple of seconds my computer shuts down, restarts and does the process all over continuously with no option of cancelling this process....
can someone please help

Thank You

A:Windows update configuration problem

Do you know what update your computer is trying to install?

12 more replies
Answer Match 53.34%

Hi,

I have an Acer netbook running windows 7 starter...for several days each time I close the laptop there are updates that attempt to install but fails to do so for some reason...there are also issues of configuration,seemingly every time I start the laptop.

I have read the uploader tool page but before going through this process would like to ask why the laptop fails to update ? ...I recently got rid of any microsoft office programs...does this have anything to do with the failure to update ?

below are the updates that have failed several times ... sorry but the image is very small !

A:Windows 7 update failures and configuration issues.

It`s a couple of days since I posted the above but the updating failure continues...I`ve no idea if the failure is caused by this laptop not in fact having the required internal programs to ensure the updates are accepted...something is obviously not right.

edit ti add...maybe the laptop just doesn`t need these updates...?

1 more replies
Answer Match 53.34%

Hi all,

I tried to install Windows 7 sp1 32-bit on a formatted c drive .But after installing updates this error message pops up Windows could not update the computer's boot configuration. Installation cannot proceed.

I have compaq presario c700 laptop. Earlier I was using windows 7 itself.But after getting startup errors and unable to fix them using bootrec etc utilises I decided to go for a clean installation.

I am booting from USB

Please help.

A:Windows could not update the computer's boot configuration.

Work through the steps to Troubleshoot Win7 Installation Failures here: Windows 7 Installation Failure - Overcome

1 more replies
Answer Match 52.5%

I have a Samsung laptop a few years old - Core i7, 2TB HDD, 8gb Memory. It was supplied with Windows 7 and I have the W7 installation dvd that came with it.

Over the years I have booted from this DVD and re-installed a fresh copy of W7 several times with no problems whatsoever.

A few months ago I succumbed and upgraded to Windows 10 - no problems - it all ran fine.

I wanted to go back to W7 so I deleted all partitions on the HDD, booted from the W7 DVD as usual. Selected country:UK and created a new partition on the HDD (whole of the HDD). Files were copied to the HDD in the usual manner, Windows 7 installed up to 100%, then onto features etc. The installation went with no problems up to the fourth step - installing updates. I though it was a few seconds away from completion and re-boot. However, I then got the message 'Windows could not update the computer's boot configuration'.

Repeated several times, deleting and re-creating partition on the disk but the same happened.

In the end, I installed Windows 10 on the HDD by booting from a USB stick with W10 on and it installed no problems.

Anyone got any idea what it going on? It looks like my install of W10 has changed the disk somehow so W7 cannot ever be installed again on the disk.

More replies
Answer Match 52.5%

Hi every bodyI downloaded Windows 7 32bit (no key yet), I've tried upgrading Windows Vista SP1 but when step 2 (expandeing files) reaches 21% the installation stops with following error "Windows could not update the computer's boot configuration. Installation cannot proceed."I tried to install Windows 7 in a new partition but the process reaches 27% this time and stops with same error.I've reformatted my hard disks completely and installation process reaches 99% then stops with same error.I checked BIOS settings and found only DVD and HDD listed (no third option).the Microsoft suggestion about the registry tweaking did not apply for me (and I tried to install a fresh copy from scratch).I'm using 2 HDD in RAID0 configuration and works OK with Windows Vista, I did load the drivers to Windows 7 during installation but still getting same problem, any suggestion???

A:Windows (7) could not update the computer's boot configuration. Installation cannot proceed.??

Simple solution found for Dual Boot errors!
 
 Here is an update. Since no one else has seemed to find a solution I actually managed to find my own. Just to recap you on what had happened to me, I was trying to dual boot Windows 7 x64 with Windows Vista Ultimate x64. Somewhere in my use with Vista my BCD was corrupt/deleted and caused this error to appear. (Windows could not update your computer's boot configuration.) After searching my computer I found the registry settings were correct, and file access to the folder that contained the BCD was correct, However my BCD was corrupt/missing and so I was unable to finish the installation and get my computer to dual boot. I found this out by typing bcdedit.exe in command with admin access and it gave me the warning "BCDedit.exe could not be run. BCD is either corrupt or missing".
 
In order to fix this it was quite simple. I had to use the original installation disc for vista to repair my computer's boot files. Unfortunately I didnt have an install disc that would work with vista since I purchased mine before SP1 came out, so in order to repair it I had to create a slipstream disc with the SP1 updates added to it. after repairing I instantly was able to see both Windows 7 and Windows Vista in my boot manager when I restarted my computer. I easily fixed and finished installation with out a hitch, and I'm now staring at internet explorer inside of Windows 7 typing this message. I hope this will help anyone else ou... Read more

45 more replies
Answer Match 52.5%

Windows update was interrupted yesterday and now I'm getting all kinds of errors.

1-SVChost.exe application error Instruction at 0x745f2780 referenced memory a 0x00000000 memory could not be "read". This happens when I try to re update windows and when I boot computer and perodically while searching the internet.

2-No audio device. My sound is only working when the error message pops up.

3-Generic host process for Win32 services has encountered probelm needs to close.
(this occurs when I boot up computer)

4-unable to create C:/document and settings/jamie/application data/BVRP Software Netwaiting Moth log txt.file (this happened when I booted computer

I called dell as the system is only 4 months old, and i have warranty, however they informed me that for software related issues they would charge 264.00!!!

You could say that I'm rethinking my purchase choice.

Any help would be greatly appreciated!

Thanks so much
 

A:SVC host.exe error message-windows update, configuration problem

did a system restore to a checkpoint on monday, when all was well. Fixed the sound problem, but still getting the error message about SVChost and the Win 32 one.
 

2 more replies
Answer Match 51.66%

So yesterday automatic Windows update installed IE10, today I noticed that links in certain applications open in IE10 instead of my configured default browser, which every link from this or any other application used to open in before that update and the reboot that followed the update.
I checked the Default Programs section in the system control panel, expecting maybe Microsoft wanted to get themselves in any more trouble with the EU and changing the default to IE. This was not the case however, all the associations were still pointing to the configured default browser, I noticed however I could not uncheck the defaults already set.
So despite the obvious configuration being correct, links would still open in IE10 even after yet another reboot.
I went ahead and checked the registry associations, and found that http(s) protocol as well as htm(l) filetypes were associated with Internet Explorer with various EditFlags set (presumably to prevent changing them through the user interface, or to ignore the user interface settings).

Seriously Microsoft? Don't you have enough trouble yet?

A:Windows Update IE10 Install messes up default browser configuration

I'd avoid IE10 and uninstall the update. It's riddled with bugs.

1 more replies
Answer Match 49.14%

Hi, my friends alienware laptop has encountered the BSOD. The error reads.
File: \BCD
Error code: 0xc0000034.
I understand this problem can occur from someone not switching off their computer or laptop properly and thus not allowing the boot configuration files to be written properly. I have had this problem before with my own computer but I managed to fix the problem using command prompt. I cant remember the specifics on what commands I used although I remember using things such as, chkdsk and dskpart.
I'll start of with chkdsk, after typing chkdsk and hitting enter I get the following message. "The type of the file system is NTFS. The volume is in use by another process". Then chkdsk verifies files (stage 1 of 3) and everything is fine, then verifies indexes (stage 2 of 3) same again, everything is fine and then lastly verifies security descriptors (stage 3 of 3) which then comes with the following message. "Errors detected in the uppercase file". I then try chkdsk /f which comes with the following message. "The type of the file system is NTFS. Cannot lock current drive. Windows cannot run disk checking on this volume because it is write protected.
Now for the dskpart problem. typing dskpart works fine, then when typing commands such as, "list disk" and "list volume" comes with the following message. " There are no fixed disks to show" and "There are no volumes" I am at a complete loss at this as in my si... Read more

A:Alienware m17x Windows 8.1 BSOD (Boot configuration data missing)

Try doing a factory restore... Or a fresh install of Windows. Sounds like the laptops hard drive has failed
 

1 more replies
Answer Match 47.46%

I can't install or uninstall any software.
Most of the installed software are not working.
The default windows apps are working and few of the installed games are working (Witcher 3 - don't know how) .
Tried to reinstall Visual C++ Redistro but not working as none of exe files are opening with side by side config issue.

A:Side by side configuration issue since Windows 10 Update on 09 Aug 2016

Originally Posted by Windows Central Question I can't install or uninstall any software.
Most of the installed software are not working.
The default windows apps are working and few of the installed games are working (Witcher 3 - don't know how) .
Tried to reinstall Visual C++ Redistro but not working as none of exe files are opening with side by side config issue. can you perform a sfc scan?
And check that there aren't any pending OS updates and app updates
If you need additional help or have more questions or details to share, please join the site so you can reply in this thread. See this link for instructions on how to join Windows Central.

1 more replies
Answer Match 45.78%

Hi, this is my first entry to this site so bare with me if i mess it up

a few months ago i let my sister borrow my laptop. when i got it back the next day i turned it on and it started up as usual but before it went to the desk-top it came up with-

configuring updates: stage 3 of 3 - 0% complete
please do not turn off your computer

this is nothing new but it stays on 0% for 1/2 minutes then restarts, goes back to this page and does the same again, round and round in a loop.

i left it running like this for a couple of days to see if anything happened but still the same

does anyone know how to fix this?

A:update configuration HELP

Possibly, your sister powered down the laptop during updates. Try system restore from recovery console:If you have Windows XP CD... (if you don't have Windows CD, scroll down)1. Boot from the CD.2. When the text-based part of Setup begins, follow the prompts. Select the repair or recover option by pressing R:3. You'll find yourself at this screen:4. Once you are at the Recovery Console you will be given at least one choice of Windows installations. Normally the choice you want is the number 1 choice. Click the number 1 key at the "top" of the keyboard and click enter.NOTE: at this point your numbers to the right of your keyboard are turned off. If you insist on using these keys for your numbers remember to hit the Numbers Lock key before clicking a number over there or your computer will automatically reboot and you will have to wait through the previous steps to get back to the console. 5. You will be given a message asking for the administrator password. Unless someone or something has messed with your computer there is no password so you just click the Enter key. 6. This will bring you to a prompt that says: C:\WINDOWS>7. Type: cd \ Press EnterNote: between "cd" and "\" there should be a "blank space" otherwise the command won't work8. The prompt should now say:C:\>9. Type: cd system~1\_resto~1Press Enter.===============================================================================Note: If it gives... Read more

3 more replies
Answer Match 45.78%

During the configuration of recent Windows update, the power on my lap top cut out completely. Since then the laptop is stuck showing "Configuring update: Stage 3 of 3 - 0% complete"

Then it just closes down and starts up again.

I cannot trace my System Disk.

Can anyone help please?

Thanks!

A:Update Configuration

Turn off your computer for 5 minutes and again turn on,maybe it unblock itself,if not boot into safe and from this level try use system restore,if unable run OS in safe mode too,prepare special recovery disk Download: Windows Vista x64 Recovery Disc — The NeoSmart Files
boot it and restore system from WinRE level

additional lecture:System Restore - How to

1 more replies
Answer Match 44.94%

MY GOAL

My goal is to achieve a high level of security without compromising usability and comfort.

PROGRAMS

Droid4x (For android emulation)
VirtualBox (For Windows emulation, Ubuntu emulation, Kali Linux emulation)
AOMEI Backupper (For backups)
AOMEI Partition Assistant (For managing partitions)
AutoHotkey (For automation)
Pulover's Macro Creator (For automation)
Cheat Engine (For modding)
Classic Shell (For shell customization)
ShareX (For sharing basically everything)
Patch My PC (For updating)
Iobit Uninstaller Portable (For uninstalling)
Revo Uninstaller Portable (For uninstalling)
...and more

IMPORTANT NOTES:
I virtualize everything except for updating and gaming.
I might have forget my other stuff since I test software too much and busy with school.
Android OS is Cyanogen.
I have a backup schedule every month.
System is backed up by AOMEI Backupper.

WAITING FOR:
Stable release of NVT ERP free! ​
 

A:XavierGaming's Configuration - UPDATE 11

Forgot to mention that this configuration uses very little system resources
 

35 more replies
Answer Match 44.94%

i have windows vista that came preinstalled in my laptop...From few days i have problem configuring the updates..when i turn my laptop on there's a screen that comes up showing "configuration updates: stage 3 of 3 - 0% complete" and after a couple of seconds it read windows couldn't configure updates.Reverting changes....This is happening even though there is around 86GB of free space in my laptop....My user profile also stops working withing seconds when i connect to the internet giving following details
problem signature:
Problem Event Name: BEX
Application Name: svchost.exe_ProfSvc
Application Version: 6.0.6001.18000
Application Timestamp: 47918b89
Fault Module Name: repdrvfs.dll_unloaded
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4791a770
Exception Offset: 705f17d5
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 16393

Read our privacy statement:
http://go.microsoft.com/fwlink/?link...3&clcid=0x0409......what should i do????

A:update configuration failure

Originally Posted by amansharma


i have windows vista that came preinstalled in my laptop...From few days i have problem configuring the updates..when i turn my laptop on there's a screen that comes up showing "configuration updates: stage 3 of 3 - 0% complete" and after a couple of seconds it read windows couldn't configure updates.Reverting changes....



MS about this error
The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

Restore system:
System Restore - Undo

When you restore system.

Install service packs standalone versions from Microsoft Download Center (not from Windows Updates) Download available for Standalone Vista SP2

15 more replies
Answer Match 44.94%

When I got on my computer this morning..the screen said Configuration updates - Stage 3 of 3 -
0% completed....

It it stuck there. It does not complete, I've tried restarting, upplugging everything, it just goes right
back to this same screen.. it then goes to black like it is going to restart...then this same screen
comes up again.

I have no idea how to unfreeze this or stop this download which is obviously frozen.

any suggestions would be appreciated...going nuts.
 

A:configuration update in freeze

6 more replies
Answer Match 44.94%

I first had a dial up modem. I got frustrated with that, so I got DSL. I got a virus, so I purchased Norton Internet Security package with firewall, etc. via download. When I attempted to use the Live Update feature, I got this message:

Initializing...
Connecting to liveupdate.symantecliveupdate.com...
Unable to connect to host
LiveUpdate could not connect to your Internet Service Provider. Verify
your dial-up information is correct.
LiveUpdate session is complete.

I then deleted the dial-up configuration thinking that it would then recognize the DSL connection. Not so! I'm getting the same message. Any suggestions as to how I can get the Live Update feature to work for me? (Windows XP)
 

A:Symantec Update configuration, I think...

Hi PJ Staley,

Please do this. Click here to download Hijack This. Run Hijack this.
Click the "Scan" button when the scan is finished the scan button will become "Save Log" click that and save the log.

Go to where you saved the log and click on "Edit > Select All" then click on "Edit > Copy" then Paste the log back here in a reply.

DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required. Someone here will be glad to advise you on what to fix.

*Note: When you download Hijack This Do Not download it to a temp folder or to the desktop. Create a permanent folder somewhere like in My Documents and name it Hijack This and put it in that folder.
 

1 more replies
Answer Match 44.94%

Hey guys, I had an Updating issue recently and am still not clear on the best settings for the Update Settings?

I just installed a bunch of Optional and Recommended Updates, but was sure to exclude the Bad Guys for the W10 Upgrade stuff: KB3035583 and KB2952664

So I still don't know if this is the best or not. I was not accepting Optional and Recommended before, but since having this Update issue though I would change my actions.

This is my current setting:
1. ?Check for Updates but let me choose whether to download and install them? Is this good, or should I got with checking for them Manually.

Now wondering what this setting should be:
2. ?Give me Recommended Updates the same way I receive Important Updates?

Can someone shed some light on this for me? Thanks, Nasty7

A:Best Update Configuration Advice

Hi,
KB3035583 and KB2952664 has been reissued quite a few times
If you only passed on the current versions ?

These are the settings I've always used
The only issue with the update system is these are needed KB3020369 & KB3172605

2 more replies
Answer Match 44.52%

Just tried to install Vista Home Premium. Went well until a panel stopped the process and said: "Windows could not update computer's boot configuration. Installation cannot proceed."
Any suggestions what needs to be done to correct this condition?

rjkloo
 

A:Vista won't update boot configuration

10 more replies
Answer Match 44.52%

Hi, I downloaded AVG Free, it said to check for updates.
When i do, It says it can't connect to server. I went to the
settings for updates, and i've done everything it says. I still can't get it to update. Does anyone have any suggestions?
chuck.
 

A:Solved: AVG Free Update Configuration

Maybe try uninstalling it and reinstalling it?

But first, make sure your firewall is not blocking AVG from updating!
 

3 more replies
Answer Match 44.52%

My Dell xps is stuck on 3 of 3 update configuration. What do I do?

A:stuck in update configuration loop

Wait
 
 
 
(how long has it been stuck?)

2 more replies
Answer Match 44.52%

NOTE: DM log collector seem to be getting stuck when collecting msinfo32.nfo, so the attached file can be incomplete. Please let me know if it can take longer than 10 minutes to collect this data so i will run the program again.

BSOD #1: It started at around January 15th - basically when i shoot down the system, theres a suprisingly short windows update. Then whenever i boot the PC and it starts to configure the update, bluescreen pops up with an error code 0x0000007E and i have to use system recovery to succesfully run the system.

BSOD #2: Ive never fixed it and it occures since i bought the PC. When i play games (and very rarely when using internet browser) my PC is getting random freezes, display driver errors, monitor is turning off and of course sometimes BSODs happen. Ive tried several different drivers, memory/hdd tests, temperatures, stress tests, 2 different monitors and GPUs, and plugging out/in hardware inside the PC case then i gave up. So basically all the BSODs listed in a ZIP file until January 15th are related to this problem.

A:BSOD on Windows Update; BSOD when playing games

At this state make a backup of all your files and re-install windows.

9 more replies
Answer Match 44.1%

Had this problem on 2 machines; I read and tried all the fixes suggested on the internet; about a dozen of them over and over again.
Problem is the HARDDRIVE!
I had a fresh install and had the problem with existing harddrive.
Also had problem on an up and running computer about 4 months old; just never got around to fixing it.
I tried all the fixes on the new one to no luck. I know some windows setup settings look for certain hardware for some setup processes so I tried an old drive I have kicking around. I Cloned the new drive onto it and ran the computer and then SP1 and all worked. I cloned back to the new drive and about 187 updates have now installed. It's working perfectly.
I had the same problem on the second computer and cloned it onto a different drive and then to an SSD also; it worked on both drives; also had 187 updates install.
Even after reinstalling the OS twice and immediately trying the SP1 it still didn't work until I cloned to the older harddrives.
Finally!!

More replies
Answer Match 44.1%

Help!
Had an incomplete install of a program...computer otherwise working fine...did a system restore to try to go back to preinstall...in the system restore shutdown and restart, now hung up in a update configuation loop that is in third step up to 99% that shuts down only to do the same thing over and over again. So my system never gets to the mainscreen acknowledging system was restored.
I tried F8 going to safe mode, but configuation step 3 takes over again, goes to 99% and shuts down to restart.
I tried the vista 64 sp1 disc...cannot acccess another restore point since it says the system is already in restore mode....just never gets there with the endless 3rd step update configuration loop.
The disc also does not offer the repair/update mode as an option...only full install.
I do have norton ghost 14 on the system...so there is a complete backup file on another internal drive...but no way to get to it to initiate a recovery.
VERY FRUSTRATING!!!
Could time remedy the situation...letting the computer lay idle for a few days...then try to boot up??? I've heard that this on occaision could work with Vista.
Any other thoughts???
Thanks!

BTW, computer is a hp desktop with Vista Ultimate 64 sp1, 4 gb ram, and intel dual core processor, with a bunch of bells and whistles.

A:system restore update configuration loop

Hello peterpy.

Can you get to bios setup so you can change the boot order to boot from the Vista install CD?

Keep us informed!













Later Ted

5 more replies
Answer Match 43.68%

MY GOAL

My goal is to achieve a high level of security without compromising usability and comfort.

PROGRAMS

Droid4x (For android emulation)
VirtualBox (For Windows emulation, Ubuntu emulation, Kali Linux emulation)
AOMEI Backupper (For backups)
AOMEI Partition Assistant (For managing partitions)
EagleGet (For managing downloads)
AutoHotkey (For automation)
Pulover's Macro Creator (For automation)
Cheat Engine (For modding)
Classic Shell (For shell customization)
ShareX (For sharing basically everything)
Patch My PC (For updating)
Iobit Uninstaller Portable (For uninstalling)
Revo Uninstaller Portable (For uninstalling)
...and more

IMPORTANT NOTES:
I virtualize everything except for updating and gaming.
I might have forget my other stuff since I test software too much and busy with school.
Android OS is Cyanogen.
I have a backup schedule every month.
System is backed up by AOMEI Backupper.

WAITING FOR:
Stable release of NVT ERP free!

MY DESKTOP - WINDOWS 10 HOME

MY BROWSER - SLIMJET


 

A:XavierGaming's Free Gaming Optimized Configuration - UPDATE 9

Forgot to mention that this configuration uses very little system resources
 

34 more replies
Answer Match 43.68%

PROGRAMS

Droid4x (For android emulation)
VirtualBox (For Windows emulation, Ubuntu emulation, Kali Linux emulation)
AOMEI Backupper (For backups)
AOMEI Partition Assistant (For managing partitions)
EagleGet (For managing downloads)
AutoHotkey (For automation)
Pulover's Macro Creator (For automation)
Cheat Engine (For modding)
Classic Shell (For shell customization)
ShareX (For sharing basically everything)
Patch My PC (For updating)
Iobit Uninstaller Portable (For uninstalling)
Revo Uninstaller Portable (For uninstalling)
...and more

IMPORTANT NOTES:
I virtualize everything except for updating and gaming.
I might have forget my other stuff since I test software too much and busy with school.
Android OS is Cyanogen.
I have a backup schedule every month.
System is backed up by AOMEI Backupper.

WAITING FOR:
Stable release of NVT ERP free!

MY DESKTOP
I AM OPEN TO SUGGESTIONS!​
 

A:XavierGaming's Free Gaming Optimized Configuration - UPDATE 6

Forgot to mention that this configuration uses very little system resources
 

29 more replies
Answer Match 43.68%

Feel free to recommend free security softwares in the comments section!
 

A:XavierGaming's Free Gaming Optimized Configuration - UPDATE 4

Forgot to mention that this configuration uses very little system resources
 

28 more replies
Answer Match 43.68%

PROGRAMS

Droid4x (For android emulation)
VirtualBox (For Windows emulation, Ubuntu emulation, Kali Linux emulation)
AOMEI Backupper (For backups)
AOMEI Partition Assistant (For managing partitions)
EagleGet (For managing downloads)
AutoHotkey (For automation)
Pulover's Macro Creator (For automation)
Cheat Engine (For modding)
Classic Shell (For shell customization)
ShareX (For sharing basically everything)
Patch My PC (For updating)
Iobit Uninstaller Portable (For uninstalling)
Revo Uninstaller Portable (For uninstalling)
...and more

IMPORTANT NOTES:
I virtualize everything except for updating and gaming.
I might have forget my other stuff since I test software too much and busy with school.
Android OS is Cyanogen.
I have a backup schedule every month.
System is backed up by AOMEI Backupper.

WAITING FOR:
Stable release of NVT ERP free!

MY DESKTOP
I AM OPEN TO SUGGESTIONS!​
 

A:XavierGaming's Free Gaming Optimized Configuration - UPDATE 8

Forgot to mention that this configuration uses very little system resources
 

34 more replies
Answer Match 43.68%

PROGRAMS

Droid4x (For android emulation)
VirtualBox (For Windows emulation, Ubuntu emulation, Kali Linux emulation)
AOMEI Backupper (For backups)
AOMEI Partition Assistant (For managing partitions)
EagleGet (For managing downloads)
AutoHotkey (For automation)
Pulover's Macro Creator (For automation)
Cheat Engine (For modding)
Classic Shell (For shell customization)
ShareX (For sharing basically everything)
Patch My PC (For updating)
Iobit Uninstaller Portable (For uninstalling)
Revo Uninstaller Portable (For uninstalling)
...and more

IMPORTANT NOTES:
I virtualize everything except for updating and gaming.
I might have forget my other stuff since I test software too much and busy with school.
Android OS is Cyanogen.
I have a backup schedule every month.
System is backed up by AOMEI Backupper.

WAITING FOR:
Stable release of NVT ERP free!

MY DESKTOP
I AM OPEN TO SUGGESTIONS!​
 

A:XavierGaming's Free Gaming Optimized Configuration - UPDATE 5

Forgot to mention that this configuration uses very little system resources
 

29 more replies
Answer Match 43.68%

PROGRAMS

Droid4x (For android emulation)
VirtualBox (For Windows emulation, Ubuntu emulation, Kali Linux emulation)
AOMEI Backupper (For backups)
AOMEI Partition Assistant (For managing partitions)
EagleGet (For managing downloads)
AutoHotkey (For automation)
Pulover's Macro Creator (For automation)
Cheat Engine (For modding)
Classic Shell (For shell customization)
ShareX (For sharing basically everything)
Patch My PC (For updating)
Iobit Uninstaller Portable (For uninstalling)
Revo Uninstaller Portable (For uninstalling)
...and more

IMPORTANT NOTES:
I virtualize everything except for updating and gaming.
I might have forget my other stuff since I test software too much and busy with school.
Android OS is Cyanogen.
I have a backup schedule every month.
System is backed up by AOMEI Backupper.

WAITING FOR:
Stable release of NVT ERP free!

MY DESKTOP
I AM OPEN TO SUGGESTIONS!​
 

A:XavierGaming's Free Gaming Optimized Configuration - UPDATE 7

Forgot to mention that this configuration uses very little system resources
 

29 more replies
Answer Match 43.68%

WARNING

As I've test the incompatibilities, patches, and scripts on my virtual machine, I have made tweaks to this configuration both concerning system and settings. The tweaks I've made to this system are critical and will cause system instability if not configure automatically. In addition to that, I've made custom scripts made with AutoHotkey to optimize the compatibility of some of my security software. These scripts are unique to each software and are converted to an executable. If you wish to copy my configuration, PM me or do extensive research as the scripts and settings that I made for my configuration are critical to compatibility and optimization.

MY GOAL

My goal is to achieve a high level of security without compromising usability and comfort.

PROGRAMS

Droid4x (For android emulation)
VirtualBox (For Windows emulation, Ubuntu emulation, Kali Linux emulation)
AOMEI Backupper (For backups)
AOMEI Partition Assistant (For managing partitions)
EagleGet (For managing downloads)
AutoHotkey (For automation)
Pulover's Macro Creator (For automation)
Cheat Engine (For modding)
Classic Shell (For shell customization)
ShareX (For sharing basically everything)
Patch My PC (For updating)
Iobit Uninstaller Portable (For uninstalling)
Revo Uninstaller Portable (For uninstalling)
...and more

IMPORTANT NOTES:
I virtualize everything except for updating and gaming.
I might have forget my other stuff since I test software too much and busy with school.
Androi... Read more

A:XavierGaming's Free Gaming Optimized Configuration - UPDATE 10

Forgot to mention that this configuration uses very little system resources
 

35 more replies
Answer Match 43.26%

I've been trying to upgrade from Win XP to Vista Ultimate. I have tried installing several times. The first time, the computer got hung up on expanding files at 21% and I rebooted. After that I have been getting the msg "Windows could not update the computer's boot configuration. Installation cannot proceed. I've check on a few forums and someone always says to restore the default value for the UpperFilters registry entry and then restart computer. In the steps that follow, it says to modify UpperFilters and to type PartMgr and click ok. This seems to work for some people, I however already had the PartMgr value on there. Can someone tell me what I can do, besides doing a fresh install?

Thanks
 

A:Vista Ultimate Upgrade wont Update Boot Configuration

6 more replies
Answer Match 43.26%

I have an HP P6530F desktop with Windows 7 Home Premium 64 bit SP1. The HP Support program that periodically scans my computer is offering an optional update for Intel RAID Driver and Configuration Software. I have attached a screenshot of the specifics.

My computer seems to be running fine. Is this update something I should bother with?

A:Intel RAID Driver and Configuration Software Update - Should I Install

If you're not running a RAID setup then no, leave it well alone.

1 more replies
Answer Match 42%

Hello,

my computer has been dead for the last few days so to speak. For two days ago I turned on my computer - it started up just like any other day. I saw the Desktop and bang, blue screen of death. This has not happened since I installed Windows on my new SSD Harddisk (I'm running with two disks, one SSD for Windows and a HDD for everything else), so I simply started my computer again. (My computer worked just fine last weekend, no problems at all. I had a Windows Update and then this happened..).

During the set-up it stopped after the Motherboard-image - I had to chose between starting Windows Normal or repair it. Starting Windows normally does not help - it just give me BSOD right before or right after hitting the desktop. (Sometimes even before the Welcome-screen). So choosing to repair Windows during the setup is the only thing I can do.

By doing so, Windows searches for errors. I get the following error codes:
0x0
0x490
..and some with 6 f's.

(Today and yesterday I only got 0x0, which apparently stands for 'unknown').

Hitting F8 during setup and loading Windows in safe-mode (/secure mode?) does not help either, I get BSOD here as well.

I have tried to change the boot location (different disks and from CD). As a standard, its booting from my harddisk - all though it's booting from the wrong disk (the HDD). When I'm choosing the SSD I can't get any further and I get the message: "Missing Bootmgr..".

The only way to boot the computer correc... Read more

A:Windows Error and BSOD - Windows Update installed on wrong drive (?)

Update: By booting from the disk I managed to see the desktop and I have now opened my computer in fail-secured with CMD.. oops, BSOD . Dangit.

9 more replies
Answer Match 41.58%

Please can anyone help. Done chsdsk last time and solved. This always happens after windows update, what is going on? Do I disable in future and leave you good people alone? Are they really nesscesary?

A:BSOD after windows update again

Your logs are incomplete, important files are missing that we need to analyze your issue/s. Follow Blue Screen of Death (BSOD) Posting Instructions, let the tool run until it has completely finished and then upload the new logs.

6 more replies
Answer Match 41.58%

Hi!

Updated my computer via Windows Update today. After this i got two BSOD.

The computer was running great beforehand. Any idea what i need to do?

Help is much appreciated!

A:BSOD after windows update.

Adding the SF tool files.

2 more replies
Answer Match 41.58%

I recently acquired an annoying adware virus after installing a program, called WebCakeDesktop.Updater.exe in Task Manager. I ran a scan on my computer (I use Malwarebytes), quarantined and deleted all redflagged and related items, and thought I was done with it. Nope. I went into add/remove programs and uninstalled all related programs. Still nothing. So I opened Firefox, and reset it. Opened Internet Explorer to reset, but I couldn't find a reset option anywhere, so I went to update to IE8. Upon attempting to install it, it gave me an error message that I could not install IE8 because a Windows update needed to be installed. It linked me to said update, and naturally, I went to install the update. It prompted me to restart the computer, and I did so... Only to be met by a blue screen of death.

The error message is as follows:

A problem has been detected and Windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this Stop error screen, restart you computer. If this screen appears again, follow these steps:

Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check you hard drive to make sure it is properly configured and terminated.
Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

Technical information:

***STOP: 0x0000007B (0xBACC3524, 0xC0000034, 0x00000000, 0x00000000)

---

I cannot start up Windows XP in any mode. These modes inc... Read more

A:BSOD After Windows Update

10 more replies
Answer Match 41.58%

It seems after today's updates, I'm having BSODs when trying to login to Windows. The worst thing is, the updates failed to install and I get the "Reverting back" message and my PC restarts. The updates are "Update for Windows 7 for x64-based Systems (KB2647753), (KB2729094), (KB2732487), and (KB2732500)." I suggest everyone avoids this right now because after a quick Google search I'm not the only one. I've attached my Seven Forums zip file. Thanks for any help!

A:BSOD After Windows Update

Hello MCleveland and thank you for posting.

I will not dig too deep into this BSODs, because I already know what's going on. Microsoft is currently fixing the BSODs issues regarding updates as the KB2647753 legacy. Microsoft has temporarily pulled back this update and hopefully they'll release a fix, very soon.

Same Problems

Network Defend: Microsoft Update KB2647753 is broken (Fix it)
KB2647753 update problem good clear solution - Tech Support Guy Forums
Problem with Windows Update for KB2732500 - Microsoft Answers
Operating Systems [Archive] - Page 61 - [H]ard|Forum

It was released in August and should be fixed soon.

Best Regards,
Frederik.

2 more replies
Answer Match 41.58%

So, last night I restarted my computer to finish installing updates. I started it up again this morning, only to have it blue screen on me. Since then, it has happened twice more. For some reason, I think it may have to do with my USB ports? I had a USB mouse plugged in, as well as my ipod. I have unplugged both, and my computer seems to be stable at the moment.
Notice: I am not very tech savvy...Any help would be greatly appreciated!

? OS: Windows 7
? x64
? Windows 7 was the original OS
? The OS came pre-installed
? I bought it around January of 2010
? No, I have not reinstalled the OS

? AMD Turion II Ultra Dual-Core Mobile M600 2.40 GHz
? ATI Mobility Radeon HD 4530 Series
? MotherBoard Manufacturer: Hewlett-Packard
Model: 3639
? Power Supply - Hewlett-Packard @ 90W

? System Manufacturer - Hewlett-Packard
? Exact model number - dv7-3078nr

A:BSOD after windows update

Hi -

Remove Zone Alarm.

Regards. . .

jcgriff2


`


BSOD SUMMARY

Code:

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\071411-20950-01.dmp]
Built by: 7600.16792.amd64fre.win7_gdr.110408-1633
Debug session time: Thu Jul 14 23:17:20.593 2011 (GMT-4)
System Uptime: 0 days 0:05:31.310
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2
Bugcheck code 0000007F
Arguments 00000000`00000008 00000000`80050033 00000000`000006f8 fffff800`02c50e88
BiosVersion = F.11
BiosReleaseDate = 10/30/2009
SystemManufacturer = Hewlett-Packard
SystemProductName = HP Pavilion dv7 Notebook PC
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\071411-18720-01.dmp]
Built by: 7600.16792.amd64fre.win7_gdr.110408-1633
Debug session time: Thu Jul 14 23:11:21.501 2011 (GMT-4)
System Uptime: 0 days 1:21:35.218
*** ERROR: Module load completed but symbols could not be loaded for tcpip.sys
Probably caused by : NETIO.SYS ( NETIO!CompareSecurityContexts+6a )
BUGCHECK_STR: 0x7f_8
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x7f_8_NETIO!CompareSecurityContexts+6a
Bugcheck code 0000007F
Arguments 00000000`00000008 00000000`80050033 00000000`000006f8 fffff8... Read more

1 more replies
Answer Match 41.58%

I was installing some updates (I think one driver, new definitions for windows defender, and a couple of random updates), and had restarted my computer. It went to the update screen where is shows the % finished before booting up and the it went to a BSOD. The computer started up again, and it went back to the update screen. It did the BSOD one more time, and then after the reboot it went and logged normally into windows, without finishing the updates (I believe it only got as far as %35. The BSOD Dump file is attached.

Thanks for your help!

A:BSOD during Windows Update

Something is puzzling there ...

May I ask you one pardon question? How long you are using the Convent Eye program?

Is this program has anything to do with 11th October, Thursday?

If not, can you remember what have you done on that day?

Depending on your answer only, I can suggest you anything.

Why?

It is crashed on cewd32.sys. Not a single info is available on it all over the internet.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {9a58e000, 0, 830b9a51, 0}

*** WARNING: Unable to verify timestamp for cewd32.sys
*** ERROR: Module load completed but symbols could not be loaded for cewd32.sys
Probably caused by : cewd32.sys ( cewd32+217b )

Followup: MachineOwner
---------
And, the driver's date is 11th October, Thursday.

Code:
lmvm cewd32
start end module name
91bc0000 91bca000 cewd32 T (no symbols)
Loaded symbol image file: cewd32.sys
Image path: \??\C:\Windows\system32\Drivers\cewd32.sys
Image name: cewd32.sys
Timestamp: Thu Oct 11 22:28:11 2012 (5076FAA3)
CheckSum: 0000... Read more

9 more replies
Answer Match 41.58%

Hello,

I did a windows update last night and since then I have been unable to load my Windows 7 Professional OS. The computer is stuck in a continuous reboot cycle. I see the initial Windows splash prior to it automatically rebooting. I tried to boot into safe mode and the behavior was the same. The computer was running fine and no hardware changes or other software changes were performed at the time of the Windows update. I cannot recall exactly which critical updates were listed but there were 2 from 8/10 and I think one from 8/24.

I've managed to catch the BSOD by disabling the auto reboot. It gives the following STOP error : 0x0000007B (0xFFFFF880009A98E8, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)

If I select safe mode, the last driver to load prior to the reboot is "fvevol.sys"

I've tried switching between AHCI and IDE compatible in the BIOS drive configuration with no success.

The computer is an ASUS AP003 with a Pentium E5300/2.6Hz with 6GB DDR2 800 memory. I have a 500GB Seagate ST3500418AS as the primary boot drive.

I also only have the manufacturer recovery CD that will reinstall the OS but I haven't been able to find a "repair OS" selection on that CD.

At this time, I'm looking for any possible suggestions that don't require me to reinstall the OS. I understand that it may come to that but I'd like to get some suggestions to try before that.

Thanks for any help or suggestions.

A:BSOD after Windows update

  
Quote: Originally Posted by spankasmurf


Hello,

I did a windows update last night and since then I have been unable to load my Windows 7 Professional OS. The computer is stuck in a continuous reboot cycle. I see the initial Windows splash prior to it automatically rebooting. I tried to boot into safe mode and the behavior was the same. The computer was running fine and no hardware changes or other software changes were performed at the time of the Windows update. I cannot recall exactly which critical updates were listed but there were 2 from 8/10 and I think one from 8/24.

I've managed to catch the BSOD by disabling the auto reboot. It gives the following STOP error : 0x0000007B (0xFFFFF880009A98E8, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)

If I select safe mode, the last driver to load prior to the reboot is "fvevol.sys"

I've tried switching between AHCI and IDE compatible in the BIOS drive configuration with no success.

The computer is an ASUS AP003 with a Pentium E5300/2.6Hz with 6GB DDR2 800 memory. I have a 500GB Seagate ST3500418AS as the primary boot drive.

I also only have the manufacturer recovery CD that will reinstall the OS but I haven't been able to find a "repair OS" selection on that CD.

At this time, I'm looking for any possible suggestions that don't require me to reinstall the OS. I understand that it may come to that but I'd like to get some suggestions to try before... Read more

4 more replies
Answer Match 41.58%

Hi everyone,

I recently built a new system (like a month ago) and everything seemed fine at first and then I suddenly got 2 or 3 random BSOD while playing Diablo but everything else was running smooth. Afterward I got another while downloading something with steam (wasn't even using the computer).
It was kind of hard to get a BSOD at that point but right now I am able to get it every time I try to update Windows (I did all the updates successfully when I installed windows at first).

I am not sure where to start looking at.... I think it might be related to my network adapter or maybe my SSD drive but I am not really good at analyzing minidump so here I am!

Here's what in the system:
- Video card : EVGA GeForce GTX 550 Ti Superclocked​- Ram : ​Corsair CMZ16GX3M4A1600C9 16GB​- Motherboard: ​ASUS P8Z77-V Pro​- CPU : ​Intel Core i5 3570K​- HDD: ​Western Digital 2TB​- SSD: ​OCZ Vertex 4 128GB​ ​- Power supply : Corsair TX750 V2​- Windows 7 ultimate 64 bits

Drivers are up to date, Windows is not since I can't update it anymore :/
I also did prime95 torture test for like 2 hours and everything was fine.

Any help will be greatly appreciated
Thanks
 

A:BSOD when trying to update Windows

I know many of you love ASUS by why? The minidumps are all the same. Non discript... I'm running a 60GB Kingston SSD drive as a back up with no problems. The OCZ might be your problem. Is is set on a SATA 3 port as AHCI in the bios?
 

9 more replies
Answer Match 41.58%

Hello,

I have a windows vista ultimate sp1 32 bit computer. I had just bragged to a friend of mine who was complaining about vista that I had not had a BSOD in well over a year, and that my computer had been stable and was performing well. I guess I shouldve knocked on some wood. I have auto updates disabled as I like to manually check for and install windows updates. So last night I check for updates and there were two. One was windows defender definition update and the other was .netframework3.5sp1 update. So I clicked on install, and a few seconds later the screen turned black, followed by my first BSOD in a very long time. I restarted the computer and tried the updates again, and this time they worked. Below is the BSOD info. Any help would be much appreciated.

Thanks

A:BSOD during windows update

hi maybe this will help you find the issue http://aumha.org/a/stop.php#0x9f have a scroll round to the error code you got

12 more replies
Answer Match 41.58%

machine is new, fresh win7 x64 home install, began updating windows 5 updates at a time, got through 20 or so of them, did the next 5 and it BSOD upon restart from windows update

attached my report

should i restore to the previous 5 updates?


edit: since this bsod i have completed the rest of the updates and restarted again... no bsod so far

A:BSOD after windows update

There is no dmp file in the one you just uploaded. Please upload them again





Quote:
Go to C:\Windows\Minidump and copy all of the dmp files to the desktop. Select all>right-click on one>Send to>New Compressed folder. Then attach the zip file to your next post by use of the paperclip icon in the advanced editor.

2 more replies
Answer Match 41.58%

I get 2-3 diffrent BSOD;
- On Windows update (think it is on KB982018)
- On Asus PC Diagnostic and it's Stress Test

It is also not possible to run the Windows Performance Assesment tool without error

I think it is a problem with the motherboard =(
It is a brand new PC with W7 Pro x64.
I installed W7 + Asus drivers from the CD + Windows update

A:BSOD on Windows update

For your 0x101 crash, read through STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg and post back if you need any help.

1 more replies
Answer Match 41.58%

Hiya
Since Windows updated itself (around mid April) I've been getting BSOD pretty constantly. Sometimes the pc is fine for hours, other times I get 3 in the space of 10 minutes. Ive updated the video card and network drivers as bluescreenview identified those as the problem, but alas it is still happening . Any help would be greatly appreciated! I've also run check disk and memory diagnotics which revealed nothing.

Harry

My Pc specs
Win 7 Professional 64 bit
4 GB RAM
nvidia gtx 8800
realtek hd audio

A:BSOD since Windows update

Any ideas?
Be much appreciated!

3 more replies
Answer Match 41.58%

So far, I have little more than an operating system with no actual software installed. I have wanted to do some updates to my installation, but on several occasions, I have been stopped by a BSOD. Sometimes it is not on the screen long enough to construe the error. Also, I have been shown the location of the error logs that purportedly cause BSOD, but me, with admin privelages, have not enough permissions to see them.

My hardware is indicated in considerable detail under my user profile (click on my username and follow the links to "system spec").


Recently, these BSODs have disappeared to be replaced with: Unknown error: Code 800B0100
Unknown error: Code 80073172
Unknown error: Code 8007065E
Paul King

A:BSOD from Windows Update

Hello Paul and welcome to Seven Forums.

Since you're dealing with BSOD issues, it would help if you set up your machine to generate dump files whenever you get a BSOD. And then follow the BSOD posting instructions.

Dump Files - Configure Windows to Create on BSOD

http://www.sevenforums.com/crashes-d...tructions.html

If I'm understanding things correctly, you're trying to install Windows Updates but one or more of them are causing a BSOD. Is the computer set to "Install updates automatically (recommended)"? If so, you probably won't know for sure which update is causing the problem. It's better to install updates manually in small groups (maybe 5 at a time.) Keep track of the KB numbers. Restart the computer after each group and make sure things are working as they should. If there are problems you'll know which group of updates to uninstall. Then try installing one at a time, rebooting after each one, and check the computer. They'll either all install correctly or you'll know the specific update causing problems. Start with the Critical updates first, then Important, then Recommended, then Optional. This is a slower method but usually gives better update results.

Windows Update Settings - Change

9 more replies
Answer Match 41.58%

Speccy: http://speccy.piriform.com/results/6ITWzseXfaeNUeaOQ2iJQXc
 
 
MiniToolBox by Farbar  Version: 30-11-2014
Ran by Erick (administrator) on 10-12-2014 at 17:05:14
Running from "C:\Users\Erick\Downloads"
Microsoft Windows 7 Ultimate  Service Pack 1 (X64)
Boot Mode: Network
***************************************************************************
 
========================= Flush DNS: ===================================
 
Windows IP Configuration
 
Successfully flushed the DNS Resolver Cache.
 
========================= IE Proxy Settings: ============================== 
 
Proxy is not enabled.
No Proxy Server is set.
 
"Reset IE Proxy Settings": IE Proxy Settings were reset.
 
========================= FF Proxy Settings: ============================== 
 
 
"Reset FF Proxy Settings": Firefox Proxy settings were reset.
 
========================= Hosts content: =================================
 
 
 
========================= IP Configuration: ================================
 
NETGEAR WNDA3100v2 N600 Wireless Dual Band USB Adapter = Wireless Network Connection (Connected)
Realtek PCIe FE Family Controller = Local Area Connection (Media disconnected)
PdaNet Broadband Adapter = Local Area Connection 2 (Media disconnected)
TAP Adapter V9 for Private Tunnel = Local Area Connection 2 (Media disconnected)
TAP-Win32 Adapter V9 = Local Area Connection 3 (Media disconnected)
 ... Read more

A:BSOD after Windows update?

Could try reinstalling/updating your usb network adapter driver. Also could try Who Crashed to maybe learn what is causing the bsod

1 more replies
Answer Match 41.58%

Mod Edit: Topic split from: http://www.bleepingcomputer.com/forums/t/511883/post-update-windows-81-error-driver-irql-not-less-or-equal/
 
 
Hi everyone
i have exactly the same problem and it is started about 3 days ago and because of that, i didn't opened a new topic and i'm asking my question here....
i've done all the steps in the second post and this is my minidump files
 
http://www.uploadscenter.com/ev22pv7uolep
 
i don't know does it matter or not but i'm running windows 8.1 enterprise x64
and this is also MiniTollBox report:
 
 
MiniToolBox by Farbar  Version: 18-12-2013
Ran by Tannom (administrator) on 21-01-2014 at 17:38:43
Running from "C:\Users\Tannom\Downloads\Programs"
Microsoft Windows 8.1 Enterprise  (X64)
Boot Mode: Normal
***************************************************************************
 
========================= Event log errors: ===============================
 
Application errors:
==================
Error: (01/21/2014 05:33:07 PM) (Source: Perflib) (User: )
Description: Outlook
 
Error: (01/21/2014 05:33:07 PM) (Source: Perflib) (User: )
Description: Outlook8
 
Error: (01/21/2014 05:33:06 PM) (Source: Perflib) (User: )
Description: BITSC:\Windows\System32\bitsperf.dll8
 
Error: (01/21/2014 05:08:24 PM) (Source: Software Protection Platform Service) (User: )
Description: Acquisition of genuine ticket failed (hr=0x80072EFD) for template Id {99d92734-d682-4d71-983e-d6ec3f16059f}
... Read more

A:BSOD after WIndows 8.1 update

Hi
 
Please try the below steps.
 
 Download and install Win8 and Win8.1 Auto Installation Program from the below link. It will update your Ethernet driver to latest revision.
 
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false
 
If the BSOD continues, please uninstall Internet Download Manager. Possible involvement of IDM in the crashes can be seen in the dumps. Until the issue is resolved, please don't install any download managing clients.
 
 
Let me know your findings with next reply.

7 more replies
Answer Match 41.58%

Hi, Hope someone can help me - i'm a total computer-moron so please bear with me.

I turned on my laptop today and before starting up, it began automatically installing updates - I left it to do whatever and came back to find the BSOD error 0x000000006b (0xFFFFFFFFFC00007 - something like that, disappeared before I have a chance to write it down!) - hoping that means something to someone here! lol.

I've tried restarting again but got the same error. I'm also tried start up repair but it's been an hour and it is still 'attempting repairs'
I also tried to start it from the Last known good configuration but it just took me to the error screen again.

Someone suggested I try a system restore but I don't know how to do that seeing as it's not booting up?

Of course, I have an essay due this week so I now i'm stressing out. Any help would be appreciated!

The OS is Windows 7.

Thanks

A:BSOD - After Windows Update

Hi,

Normally I would ask for the dump files, etc, but as this happened after a Windows update, let's take care of that first.


Quote:




Someone suggested I try a system restore but I don't know how to do that seeing as it's not booting up?




Can you boot into safe mode? If so, you can system restore from there - Getting into Windows Safe Mode

Regards,

Patrick

1 more replies
Answer Match 41.58%

So this morning Windows updated automatically when I shut down, but then a little bit later when I tried to boot it up.. I got the blue screen of death. I have gotten it everytime I have tried to boot it up. I couldn't tell you what updates were all downloaded, because there were a lot of them. Now, I can't get on in safe mode and I can't get into the recovery options. It crashes when I try to get on in safe mode, and it just sits there with the mouse and everything when I go into the recovery options, but the options just never show up.

A:BSOD after Windows Update

I don't know if this will help any, but the error thing says, "STOP: 0x000000ED"

9 more replies
Answer Match 41.58%

Any help on this issue would be appreciated.

I bought a new Alienware 14 laptop with Windows 8 installed. A week went by with no issues, I installed Steam and plenty of games but not much else.

Today I had a prompt to install some windows updates and restart, which I did, but on reboot I got a BSOD with the System Thread Exception Not Handled error.

I googled the cause and most posts pointed to a driver error, the fix suggesting going in to safe mode and reinstalling the nvidia driver.

I tried but couldnt get the laptop in to safe mode so in the end I just did a system restore as I didnt have that much installed. During the process of getting it back up and running I updated the Alien Respawn program and this gave me another BSOD (same error). I tried another restore and it got the laptop up and running but had rolled back the nvidia driver to 331.48 from the 331.65 that I had updated to.

The laptop seems ok now but I am worried if I install newer nvidia drivers it will come back.

I can see detailed logs in Alien Autopsy but cant see how to copy them.

Sorry here are the dumps.

A:BSOD After Windows Update

FWIW - this is the 3rd or 4th problem I've seen w/nVidia drivers (in the last week or so) that was resolved w/a driver rollback (but all of the others were Win8.1).
I'd keep an eye out on the nVidia site for a updated driver (later than 331.65) in the near future.
Look at the 2nd post here for the bugs that are still open: https://forums.geforce.com/default/t...sed-10-28-13-/

I have seen issues w/Killer network cards - but mostly on MSI systems (I only recall one on an Alienware system in the recent past).
Keep an eye on this - no need to do anything special at this point.

2 memory dumps in the WER section of MSINFO32 blame this (this is also blamed in the 2 memory dumps that I analyzed below):





nvkflt.sys Wed Mar 27 17:35:52 2013 (51536638)
NVIDIA Graphics filter driver
http://www.carrona.org/drivers/driver.php?id=nvkflt.sys



I'd suggest that you should stay with what you have right now - as it's not causing you any problems.
Should newer nVidia drivers come out - feel free to try them, but be prepared to revert back.

Should the BSOD's return, feel free to post back (and include the memory dumps) - and we'll hit your video card with a barrage of hardware tests.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the s... Read more

3 more replies
Answer Match 41.58%

I don?t know what to say about this BSOD. It seems to be happening lately with windows updates. Then windows doesn?t seem to want to start. After letting windows diagnose itself (with no solution) computer shuts off. Then try to restart it tries everything all over again.
I hope that everything needed is in the zip file.
All help/ideas is well appreciated
Thanks in advance

A:BSOD when windows tries to update

Your last crash was caused by Panda Internet Security. Please uninstall

How to uninstall Panda Antivirus Pro 2009-Technical Support-Panda Security


The other three don't blame anything specifically


Code:
sptd.sys Sat Aug 20 00:34:53 2011 (4E4F396D)
Remove Daemon Tools. The driver associated with it, SPTD, causes BSOD. Run the SPTD removal tool - DuplexSecure

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+

BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Fri Feb 24 10:12:31.302 2012 (UTC - 5:00)
System Uptime: 0 days 0:01:05.629
*** WARNING: Unable to verify timestamp for n64i1644.sys
*** ERROR: Module load completed but symbols could not be loaded for n64i1644.sys
Probably caused by : n64i1644.sys ( n64i1644+1df55 )
BUGCHECK_STR: 0x50
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x50_n64i1644+1df55
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Feb 21 14:51:27.027 2012 (UTC - 5:00)
System Uptime: 0 days 0:00:35.979
Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )
BUGCHECK_STR: 0x4E_99
PROCESS_NAME: WebProxy.exe
FAILURE_BUCKET_ID: X64_0x4E_99_nt!MiBadShareCount+4c
BiosReleaseDate = 08/27/2010
SystemManufacturer = System manufacturer
SystemProductName = System ... Read more

9 more replies
Answer Match 41.58%

Hi,

I have suffered multiple BSOD for the last three days, seems to tie in with last lot of Windows updates. I include the errors from Blue Screen View which show for every instance. I have updated my graphics driver but this makes no difference.

dxgkrnl.sys dxgkrnl.sys+5d000 fffff880`04ca7000 fffff880`04d9b000 0x000f4000 0x4ce799fa 20/11/2010 10:50:50
dxgmms1.sys dxgmms1.sys+37dc0 fffff880`04d9b000 fffff880`04de1000 0x00046000 0x4ce799c1 20/11/2010 10:49:53
nvlddmkm.sys nvlddmkm.sys+7fefa4 fffff880`0f4b1000 fffff880`10115000 0x00c64000 0x4e391010 03/08/2011 10:08:32



Any help would be really appreciated.

Thanks.

Shaun.

Home Grown PC (been running fine with no errors for 12 months)
i7 950
6gb Corsair Ram
Asus Motherboard
Nv 480GTX
60gb SSD for Windows
1tb Maxtor
500gb Maxtor
Lycosa Keyboard
Death Adder Mouse

A:BSOD since windows update?

Sorry, forgot to attach files to above!

Thanks.

3 more replies
Answer Match 41.58%

Hey everyone, so yesterday I swapped my hard drive with a different from another computer. Everything went well and I reinstalled the OS (win7). Everything went through and smooth until windows updates came though. So last night I shut off my pc (it installs during shut off) and I went to bed. I woke up in the middle of the night and saw BSOD. so I shut off my pc, woke up this morning turned on my pc again and it said (please wait..) then bsod once again. When I tried safe zone, I got the message "Failed to Configure windows update, reverting changes..".

logs are attached to the thread.

A:BSOD during windows update

Hi John .

The bugcheck seem to suggest a HDD hardware error, this could also mean
that the SATA data and power are not seated very well.
Start by opening up the PC and reseating the cables on both ends making sure there
aren't any obstructions most commonly dust.

Then test the drive for physical errors because trying to troubleshoot
failing hardware is not going to get us anywhere.

A question do you have all your data backed up?
Please answer before commencing with the steps below.



   Warning
The Following Method Should NOT Be Performed On An SSD!
Testing the HDD:
Perform a Disk Check | Disk Check - Use the /r switch, Follow OPTION TWO - command prompt at startup.
Then Post the results following | THIS METHOD
Download SeaTools for DOS if you don't want to use a CD to test the HDD you can use YUMI – Multiboot USB Creator to create a bootable USB (instructions are found at the bottom of both pages).
If SeaTools for Windows is unable to recognize your HDD visit HDDdiag and follow the instructions.
If SeaTools For DOS does not recognize the drive;
Boot into the BIOS using the *Fxkey.
Look for an entry called SATA Mode (or something similar), it should be set to IDE / AHCI.
It's probably set to AHCI which is why SeaTools doesn't recognize them in the DOS environment.
Set it to IDE then save and exit usually by pressing the F10 key.
Now boot into SeaTools and it should detect the drives.
Start the Long Test and let it run.
Upon completion don't try... Read more

1 more replies
Answer Match 41.58%

Any help would be greatly appreciated.

Kind regards

A:BSOD after update from Windows 8.0 to 8.1

Hi Dylin & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
1: kd> k
Child-SP RetAddr Call Site
ffffd000`43fd3f98 fffff803`7dc04be2 nt!KeBugCheckEx
ffffd000`43fd3fa0 fffff803`7dad4869 nt! ?? ::FNODOBFM::`string'+0x1ca32
ffffd000`43fd4040 fffff803`7dbe1f2f nt!MmAccessFault+0x7a9
ffffd000`43fd4180 fffff801`b1891d11 nt!KiPageFault+0x12f
ffffd000`43fd4310 00000000`00000000 xchalx64+0x11d11


As we can see from the analysis, the "xchalx64.sys" is causing the problems. It is related to your VixS XCODE AvStream. Let's check the driver date of this driver -

Code:
1: kd> lmvm xchalx64
start end module name
fffff801`b1880000 fffff801`b1df4000 xchalx64 T (no symbols)
Loaded symbol image file: xchalx64.sys
Image path: \SystemRoot\system32\DRIVERS\xchalx64.sys
Image name: xchalx64.sys
Timestamp: Sat Sep 08 00:11:01 2007 (46E19B3D)
CheckSum: 00577032
ImageSize: 00574000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


As we can see from the time stamp, it is extremely old to work with Windows 8.1 . I would suggest you to find an updated driver for this one or remove the software.

Let me know how it goes ^_^

2 more replies
Answer Match 41.58%

I get the BSOD when windows comes up, even if I don't login. This happened last month after the last windows update. I can boot in Safe mode and able to copy the DUMP file to a USB drive (attached). I tried to download your DM Log Collector file but my Norton 360 blocks and deletes it saying it is unsafe??

Looking at several forums suggestions I loaded MSCONFIG and selected Diagnostic startup and able to login. I have done a chkdsk and no errors found on hard drive. In safe mode I tried to unintall last updates and other programs that I have updated (Malwarebytes, Paint.net. I tried to create a restore point but this gives an error.

Oh, and used Bit Defender Rescue CD to do a virus scan and system was clean.

Any suggestions would be appreciated.

A:BSOD after last Windows update

Blue Screen of Death (BSOD) Posting Instructions

You can do it in safe mode with networking.

9 more replies
Answer Match 41.58%

I got a number of BSOD's yesterday and spent the whole evening trying to restore my computer which i did but now certain things don't work like my windows troubleshooter,DS3 tool to mention a few. The only changes i made prior to getting BSOD was first installing Tom Clancy's Ghost Recon Future Soldier and then performing windows update. After spending several hours on Google this morning i came across sfc/scannow which has helped to show me what exactly is wrong,i just don't know how to fix it. All help is appreciated,thanks in advance.

A:BSOD after windows update

Upload your dump files firstly:

%SystemRoot%\Minidump - Kernel Minidump

%SystemRoot%\MEMORY.DMP - Kernel Dump

You can substitute the %SystemRoot% for where Windows 7 is installed, which is usually C:\Windows\

Make sure that Windows has also been configured to produce a dump file upon a BSOD:Dump Files - Configure Windows to Create on BSOD
Run System File Checker at boot, this will scan for any corrupted or missing protected Windows 7 files, and attempt to repair these files automatically if possible:SFC /SCANNOW : Run in Command Prompt at Boot
Run full scans with:Anti-rootkit utility TDSSKiller
Microsoft Security Essentials - Microsoft Windows
Malwarebytes : Free anti-malware download
Remember to install the free version of Malwarebytes not the free trail; untick the box during installation.

8 more replies
Answer Match 41.58%

I was just redownloading Windows 7 Home Premium to fix any possible errors and BSOD'd.

A:BSOD during Windows Update

I was using the Windows Installation Disc.

9 more replies
Answer Match 41.58%

Today I tried to update my Windows 8 PRO /WMC to Windows 8.1

I am running the VL edition as Windows 8 as it was installed from the IT department at my university.

The dumps don't have anything recent in there, but im may be related to why I cannot update to 8.1 ( using the iso).

Thanks for the help!

A:BSOD trying to update to Windows 8.1

Some more info:

When trying to do the upgrade the process bsods with "KMODE_EXCEPTION_NOT_HANDLED"
After the restart the upgrade fails with the following error code: 0xc1900101-0x4000d

5 more replies
Answer Match 41.58%

OS - Vista/ Windows 7 ? Win 7 SP1
? x86 (32-bit) or x64 ? x64
? What was original installed OS on system? None
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Retail
? Age of system (hardware): 3 years-ish
? Age of OS installation - have you re-installed the OS? 3 months
? CPU: AMD Athlon 64 X2 7750 Kuma 2.7GHz Socket AM2+ 95W Dual-Core black
? Video Card: NVIDIA GeForce GTS 450
? MotherBoard: ASUS M3A78-EM AM2+/AM2 AMD 780G HDMI Micro ATX AMD Motherboard
? Power Supply - brand & wattage: COOLER MASTER eXtreme RP-500-PCAR 500W ATX12V V2.01 Power Supply
? Memory: CORSAIR DOMINATOR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model TWIN2X4096-8500C5D

Everything has been running fine since last time I posted here in May (Solved). Did an automatic update on, I believe, Monday night. Tuesday I started getting BSOD's. At least one per night since. Twice in one minute last night. Before I even fully booted up.

Thanks again. This is, I believe, the fourth time i've posted here over the years. I come back because you guys [griff!] are awesome!

A:BSOD's after Windows update, again.

No help so far? To the top with you!

4 more replies
Answer Match 41.58%

I had a windows update I belive yesterday and ever since then I've been getting blue screens. At first it was while I was playing GTA IV so I thought nothing of it but then it recently started happening after about 5 mins after startup. I'm posting this in safe mode right now and will attach a dmp file

A:BSOD after windows update

I'm starting to think its not a problem with the windows update but I cannot tell you for sure because I remember having a blue screen about a month ago but didnt think much of it.

4 more replies
Answer Match 41.58%

Hi everyone.

As soon as I updated to Windows 8.1 I had BSOD issues, specifically MEMORY_MANAGEMENT. Additionally Chrome was acting up, tabs weren't loading, then my system would BSOD.

Any help would be greatly appreciated!

Thanks!

A:BSOD with Windows 8.1 Update

Missing the systeminfo.txt report. Please check Windows Update and make sure that you have all Windows Updates. Make repeated checks (2 or 3) between reboots to make sure you have them all.

D: drive only has about 7% free space. Windows likes 15% free space in order to perform stuff "behind the scenes" without adversely affecting the system's performance. Please free up 15% on ALL hard drives (you can get away with 10% on larger drives and won't notice a large performance penalty)

MSI Afterburner (along with Riva Tuner and EVGA Precision) are known to cause BSOD's in some Windows systems (it's driver is usually RTCore64.sys). Please un-install it immediately!

If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized.

LogMeIn Remote drivers date from 2007/2008. Please uninstall this program immediately.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

ElbyCDIO.sys Thu Dec 16 17:58:13 2010 (4D0A9985)
CDRTools/ElbyCDIO/DVD Region Killer/VirtualCloneDrive (elby CloneDVD™ 2)/AnyDVD
http://www.carrona.org/drivers/driver.php?id=ElbyCDIO.sys

VClone.sys Sat Jan 15 11:21:04 2011 (4D31C970)
VirtualCloneCD ... Read more

5 more replies
Answer Match 41.58%

Three days ago I downloaded and installed all available windows updates (Including SP2 for MS Office, .NET Framework 2, and two Hardware updates). After it finished downloading and installing updates the computer rebooted to finalize the installation. But when windows resumed I had only 16 colors; one of the driver updates overwrote my ATI graphics driver. And about 8 seconds after my background, icons, and taskbar appeared (while programs were still loading in the background) I got a fast BSOD and then it rebooted.

My friend (who’s cable connection I used to download the updates) told me that he had the same graphic problem a week ago when he ran windows update, but his computer hadn’t crashed with a BSOD. He had fixed his computer by using system restore, so I decided to do the same.

Since windows crashed shortly after loading I booted into safe mode and restored back two hours. I then rebooted, but now the BSOD occurs before my desktop loads, it happens right after the initial windows logo screen with the green progress bar.

So I booted into safe mode again and restored two days back (to the tenth), but there was no notable change. It still flashes a BSOD and crashes right after the black screen with window’s logo finishes.

I tried a few other things, I went into safe mode and checked in Add and Remove Programs to see if I could uninstall the updates I downloaded, but they don’t show up (I don’t know what the updates were called, there were a lot of them; but I’m... Read more

A:Windows Update causes BSOD

7 more replies
Answer Match 41.58%

Greetings!

I have had a long history of BSOD issues on this system, and have exhausted my patience in trying to fix it. I have done my own research to no avail, and have even utilized my warranty to get parts replaced. At this point in time I have a replaced motherboard and video card but the BSOD issues have actually increased in frequency.

For testing I have re-loaded Windows. Ran tests on the memory. Replaced the hard drive with an SSD. Updated drivers as best as I could based on the version of Windows and availability of drivers, and as mentioned I have even had the Motherboard and Video card replaced. The only hardware left to rule out is Power Supply and CPU.

Anyway, I am hoping the guys in this forum can come up with better things for me to try before I get crazy and start replacing the more expensive stuff. This is a new machine so I feel like it is on them to fix if it turns out to be hardware related, but they want me to ship it to Texas for a week or so and I am not willing to do that.

A:BSOD on Windows 8.1 Update 1 even when not in use.

My hunch is it is your PSU.

You have only a Lennovo 280 PSU, but you are using a Geforce GTX 650. And according to these system requirements you need at least 400 watt PSU





Thermal and Power Specs:
98 CMaximum GPU Tempurature (in C)
64 WMaximum Graphics Card Power (W)
400 WMinimum System Power Requirement (W)5
One 6-pinSupplementary Power Connectors




But my advice would be to change to a min. 500 watt PSU from a A brand.

Also your dumpfiles point to the above, many different bsod error codes which are mentioning lowlevel or windows system problems (win32k.sys, cd.sys, ntkrnlmp.exe, processname:system, hal.sys etc.)

And also most of your drivers dates are from augustus 2013 or above, so a thirdparty drivers problem is probably not the culprit, but it could be that one of your windows 8 drivers needs to be updated to a windows 8.1 driver.

But first upgrade your PSU and if the bsod keeps continuing, please upload a new .SF zip.

3 more replies
Answer Match 41.58%

Hi everyone,

I've absolutely no clue about this. I've searched for any help on the internet but it seems something like an unique case.

The problem is, as title says, a BSOD "BAD_POOL_CALLER"; this happened after a normal Windows update. Windows promped me with the same "restart your computer to install the updates". I restarted and left my computer installing the updates. When back, it was on the BSOD.
From then on, my system didn't restart on normal mode (BSOD some time after the loading windows logo).

I've already tried just every system restore tool given by default by windows.
The automatic restore procedure didn't work: "the system couldn't be restored" (or something like that).
The return to a previous system configuration didn't work as well: for every previous system point that I could choose from the list, I had the same result "the recovery procedure failed, error ...".
After that, I tryied the memory check option, with no result.

The only thing working is the safe mode boot, and I will be working from this mode from now on.
As suggested, I launched sfc /scannow from cmd. The result was "impossible to repair some of the found damaged files. The details are available in the CBS.Log file".

I'll attach the Zip folder containg every files from the SF Diagnostic Tool; I've also included in the folder that CBS.log file.

Too bad I've no recovery disk at all. Before proceeding to a complete reset, ... Read more

A:BSOD after windows update,

Welcome to SevenForums.

Daemon Tools

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C9, {23e, fffff88002f88324, fffff9800d198ea0, 0}

*** WARNING: Unable to verify timestamp for dtsoftbus01.sys
*** ERROR: Module load completed but symbols could not be loaded for dtsoftbus01.sys
Probably caused by : dtsoftbus01.sys ( dtsoftbus01+1324 )

Followup: MachineOwner
---------
Please uninstall DAEMON Tools. It uses a driver called sptd.sys which is known to cause BSODs in Windows 7. Uninstall the software using Add/Remove Programs. Reboot the system. Once the program is uninstalled, run sptd.sys uninstaller to remove the driver from your system.

As an alternative, many people recommend the use of Total Mounter or Magic ISO

Uninstall AVG: AVG | Download tools and utilities

Microsoft Security Essentials. Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-
Microsoft Security Essentials - Free Antivirus for Windows Malwarebytes - FreeGood and Free system ... Read more

8 more replies
Answer Match 41.58%

Hey guys. I'm can't figure this one out. Every time I try to update Windows I get a BSOD. When I finally get the PC back up and running and try to finish updates they fail. I currently have 144 update that keep failing. I have included my most recent dump information. I've tried to wipe the PC and start over to no avail. I've swapped all hardware with a buddies PC to no avail. I've even gotten a new CPU to no avail. Please help. I have this new PC and I can't even use it. Thank you in advance for your help.

A:BSOD when trying to update Windows

Dump file information

4 more replies
Answer Match 41.58%

Today after multiple Windows updates my laptop started having problems with startup. I also got BSOD several times. Laptop is Dell, OS is 64bit. Updates were:

KB976321
KB982312
KB982331
KB2277947
KB2288621
KB979440
KB982308
KB979441
KB2288953
KB982158
KB982124
972581
KB974234
KB973709
KB2251419
KB967642
KB2284654
KB980729
KB2291599

I also started to get this after startup: Failed to connect to a Windows Service

Any help is greatly appreciated.

Thanks.

A:BSOD after Windows Update

Many Thanks for your Post could you please upload your Minidumps

See Blue Screen of Death (BSOD) Posting Instructions For more Information

Many Thanks,
Josh

1 more replies
Answer Match 41.58%

Two days ago I deployed WSUS server. On my network all computers are updated now and no problems are occurred. Except one laptop. It will show BSOD 5 or 6 times during the day, and restart. Attached is the last dump.

Any help will be highly appreciated. Thank you.

A:BSOD after Windows Update

It is caused by Norton/Symantec Event Library.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, 8b1054a0, 8b10560c, 8345fe10}

*** WARNING: Unable to verify timestamp for SYMEVENT.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT.SYS
----- ETW minidump data unavailable-----
Probably caused by : wininit.exe

Followup: MachineOwner
---------
Uninstall Norton and all Symentec products using Norton Removal tool.
Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download and install those, and then run full system scans with both of them, one by one.

Also, do some disc check.
Update your SSD's Firmware (skip it, if it is not a SSD)
Reseat the sata and power.
Run chkdsk /f/r, following the option two of the tutorial Disk Check
Seatool for dos: SeaTools | Seagate download
Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests&qu... Read more

1 more replies
Answer Match 41.58%

Recently, my computer has decided to occasionally crash out to a BSOD after boot up. It will do it maybe twice in a row and then things will be fine. I tried to run Windows Update and when I did -- BSOD!

How can I find out what is causing it? Is this something that may require a complete reinstall? Jeez I hope not!


Windows XP Pro Version 2002 - SP3
AMD Athalon 64 3200+ 2.01GHz
2 GB RAM

A:Windows Update BSOD

Can you please post the BSOD error message including the numbers.

1 more replies
Answer Match 41.58%

Was installing the "important" updates, and got a BSOD. .dmp file is attached.

A:BSOD during Windows update?

BSOD caused by KernExplorer64.sys which is part of Lavasoft software, it is a known issue with Ad-Aware.
Remove it and install MSE


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 93, {8dc, fffff8a000001a80, fffff8a008102370, 1}

Unable to load image KernExplorer64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for KernExplorer64.sys
*** ERROR: Module load completed but symbols could not be loaded for KernExplorer64.sys
Probably caused by : KernExplorer64.sys ( KernExplorer64+1277 )

INVALID_KERNEL_HANDLE (93)
This message occurs if kernel code (server, redirector, other driver, etc.)
attempts to close a handle that is not a valid handle.
Arguments:
Arg1: 00000000000008dc, The handle that NtClose was called with.
Arg2: fffff8a000001a80,
Arg3: fffff8a008102370
Arg4: 0000000000000001

Debugging Details:
------------------
CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x93

PROCESS_NAME: System

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff8000332e1d3 to fffff800030d3740

STACK_TEXT:
fffff880`08ca... Read more

2 more replies
Answer Match 41.58%

Hi !

My computer suddenly crashed yesterday evening with a beautiful BSOD. I didn't change anything or install any program. By looking a bit closer in the system log, there was a message of "windows updates ready for installation" right before the time of the crash. The computer seems to work correctly in safe-mode or under linux (it's not hardware thus).

I tried to deactivate the automatic update and it seems to be OK now. Then I tried a manual installation of the updates from microsoft windowsupdate website, and the computer crashed again during the install (BSOD).

I've been told it could be some kind of security (data prevention execution) which prevent windows from being modified by unauthorized programs.

What should I do now ? How to allow the updates to work again ?
 

A:Windows update and BSOD

16 more replies
Answer Match 41.58%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Home Premium, Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2037 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 448 Mb
Hard Drives: C: Total - 229985 MB, Free - 184432 MB; D: Total - 8487 MB, Free - 1865 MB;
Motherboard: Quanta, 30CC
Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled

I am doing some work on a friends PC, I managed to finish what I was doing and during shut-down Windows update the machine BSOD on me. Now most of the GUI interface will not load (Not technically the GUI but START menu, desktop, etc...) explorer.exe still loads, I can browse the file system and launch programs besides the aforementioned issue. I attempted to restore to a restore point but no luck. I attached two screenshots showing the issue, the issue persists even in safe mode.
 

A:BSOD During Windows Update

No issues I noticed in the logs that stood out to me that could be causing this issue.

Thanks in advanced BTW!
 

1 more replies
Answer Match 41.58%

Hi there,

Just bought an upgrade to RAM, graphics, processor and motherboard this week and have been having problems with it since.

I keep getting BSOD whether is be memory_management, NTFS.sys , or usbhub.sys. on clean installs on a range of new and old hard drives.

I have run memtest and is gave and error first time but haven't been able to replicate the error since.

System spec is currently:

Asus p8p67 LE
i5-2500K
Nvidia 8800GTS 640MB (haven't installed HD6850 yet)
4GB RAM Corsair XMS3 2x2GB CMX4GX3MA1600C9 xmp
Toughpower 650W
WD 640GB HDD/ 2TB EARS/2TB EAXS

attached is dump file. any ideas what is going wrong?

A:BSOD on clean install of windows 7 and windows update

Hi.

Run Disk Check
Check the Automatically fix file system errors box.
Check the Scan for and attempt recovery of bad sectors box

Run SFC /SCANNOW Command - System File Checker

Run RAM - Test with Memtest86+
Finish and post back with results.

5 more replies
Answer Match 41.58%

Hello working on A Dell Inspiron 570 Desktop and All was well until I try to install windows updates.. It crashes with the Error *** STOP:0x0000003B (0x00000000c0000005, 0xFFFFF80002BA8614, 0xFFFFF88004E2BFA0, 0X0000000000000000) any thoughts? THANKS in advance..
 

A:Solved: Windows 7 Random BSOD on Windows Update

8 more replies
Answer Match 41.58%

Hi all,

I got a BSOD during a windows update (I think it was something related to .net 4).
Since then when I start windows it gets to the loading bar with windows logo over it but then I get a black screen, same thing for safe mode. I have tried to repair with a win 7 installation disk but it fails, I tried to do a systeme restore after that but it failed too.

I have access to an old working partition (which I cloned onto my SSD a couple month ago)

What are my other option ?

A:Windows fail to start after windows update / BSOD

A clean install.

1 more replies
Answer Match 41.16%

Hi,

I purchased a new PC today (spec below) and after booting it up for the first time and attempting to perform some windows updates, I found that some updates were failing to install, with no clear reasoning as to why. After this, I quite often get BSOD when loading windows update (seems to centre round .NET installations), trying to update drivers (primarily graphics) and occasionally just randomly with no discernable pattern.

I have attempted various fixes posted on the net for this type of error, including some tools from the microsoft website which also failed to complete.

I attach a zipped copy of the dmp files in line with your posting policy in the hope that someone can point me in the right direction. This was a Christmas gift and it would be heartening to be able to resolve this issue without having to send the entire machine back.

Should you require any more info, just ask and I will post.

Thanks!

B

SPEC:

Intel Core I7 3770 @ 3.40GHz
8GB RAM
MSI MS-7808 Mainboard
NVIDIA GTX650
Win7 Home Premium

A:BSOD when trying to run windows update (or occasionally with IE)

Welcome to SevenForums.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41790, fffffa8000c8ed70, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35054 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
contains the address of the PFN for the corrupted page table page.
On a 32 bit OS, parameter 2 contains a pointer to the number of used
PTEs, and parameter 3 contains the number of used PTEs.
Arg2: ff... Read more

1 more replies
Answer Match 41.16%

hi guys,
A week or two ago, I received a prompt that Windows 7 had automatically downloaded some updates and when I shut my laptop down, it installed said updates.
A few days after installing these updates, I randomly received the blue screen of death.
Now my laptop is kind of old, and does randomly get some graphical errors and such every so often, so I just assumed it was on it's way out. However, after a reboot and after doing some work, it got the bluescreen again!
At that point I just shut it down, and didn't touch my laptop for about a week.

However, due to university work, and needing a computer for microsoft word, I decided to boot my laptop up and see if anything had changed. I've been using the laptop for about an hour now, and no sign of a BSOD, but upon startup, I received a message saying that this copy of Windows 7 may not be genuine, (It is most definitely genuine) and for a little while, my Avast Antivirus program refused to turn on.

I have been receiving a notification in the task bar for quite a while stating that my laptops battery may need replacing, and it doesn't hold charge for very long, but I always use it connected to a mains supply now. Could all of these problems be attributed to a hardware problem?

A:BSOD and other problems after Windows Update

Elmarco, I would not think it is hardware, but with computers, anything is possible. I would more think it is software. Please upload the BSOD Posting instructions Blue Screen of Death (BSOD) Posting Instructions to here and fill out your system specs in as much detail as possible. Maybe we can figure out what is going on.
Please fill out your System Specs


   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs

1 more replies
Answer Match 41.16%

Got a windows update, computer immediately crashed. I did a system restore to a time before the update, and I thought everything was peachy keen until I got a BSoD 3b even with the system restore. The minidump file is below. Any help would be greatly appreciated!

I've got BSoD before and think my drivers are updated, but I'm at a loss. Please help!

A:BSoD x03b after windows update

Your ATI drivers have been flagged.


Code:
fffff880`05cfa328 fffff880`110660dcUnable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
atikmdag+0x250dc

3: kd> lmvm atikmdag
start end module name
fffff880`11041000 fffff880`11c88000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Sat Aug 31 01:02:50 2013 (522132AA)
CheckSum: 00BF596C
ImageSize: 00C47000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Try updating to the latest driver offered on the AMD support page.

1 more replies
Answer Match 41.16%

Hi All,

I am getting BSOD with irql_not_less_or_equal error after updating to Windows 8.1. The restarts occurred every few minutes.

My log is attached.

Will appreciate your help in finding out what is causing the error.

Thanks

A:BSOD after Windows 8.1 update (irql_not_less_or_equal)

You have 4 hard drives. What is the make/model/wattage and age of your Power Supply?

Lot's of installer errors - what program are you tring to install that isn't working?
Please don't try to install it again until the system is stabilized (and you're sure that it's Win8.1 compatible)

Update your wired networking drivers to the latest, Win8.1 compatible version.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

ALSysIO64.sys Sat Jul 9 20:27:45 2011 (4E18F201)
Core Temp - CPU temperature monitor
http://www.carrona.org/drivers/driver.php?id=ALSysIO64.sys

AppleCharger.sys Tue Nov 1 22:46:00 2011 (4EB0AEE8)
GIGABYTE On/Off Charge driver. See here for details - GIGABYTE ON/OFF Charge [br] May cause BSOD on Win7/8 systems - uninstall to test (haven't seen recently (15Jan2013))
http://www.carrona.org/drivers/driver.php?id=AppleCharger.sys

If all of this doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings

Analysis:
The following is for informational purposes only.

Code:
**************************Wed Oct 23 11:38:15.172 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\102313-49468-01.dmp]
Windows 8 Kernel Ve... Read more

1 more replies
Answer Match 41.16%

XP did what appears to be an extensive update in the wee hours this morning. I turned the computer on to get a M$ message that it had recovered from a blue screen and that I needed to troubleshoot.

The reason I assume it is an extensive update is that Add/Remove programs lists updates for IE8, Windows XP, Office (Outlook), Windows Media Player and XP Media Center Edition. All entered this morning. Usually only major updates are listed in Add/Remove.

Has anyone else had problems with the latest updates? If I could isolate a problem with a particular update I would remove it and reset my updates to manual until M$ sorts the problem out. If nobody else has had problems with the latest updates I will start with the assumption that it was a coincidence that it happened after what appears to be a major update and troubleshoot elsewhere.

This is the heading from the page that was open when I brought my computer from sleep this morning:

“Blue screen error caused by a device or driver
You received this message because a hardware device, its driver, or related software has caused a blue screen error. This type of error means the computer has shut down abruptly to protect itself from potential data corruption or loss. In this case, we were unable to detect the specific device or driver that caused the problem.”

First BSOD I’ve had since Win 98.
 

A:Solved: BSOD after Windows update

13 more replies
Answer Match 41.16%

Hello,
Right after restarting the windows for completing the windows update, BSOD happend.
The updates were for Office 2013 and also there is an update which won't install and published yesterday "Security Update for Microsoft Office 2013 (KB2810009) 64-Bit Edition" and already there are lots of thread about it.
Thanks for your assisting

A:BSOD right after restarting for windows update

For the Windows Update issue, I would start a new thread here - Windows Updates & Activation - Windows 7 Help Forums


Code:
BugCheck F4, {3, fffffa800ae66b30, fffffa800ae66e10, fffff8000337e0d0}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe

Code:
0: kd> !process fffffa800ae66b30 3
GetPointerFromAddress: unable to read from fffff800032af000
PROCESS fffffa800ae66b30
SessionId: none Cid: 0278 Peb: 7fffffdd000 ParentCid: 024c
DirBase: 1e5bc0000 ObjectTable: fffff8a00adae470 HandleCount: <Data Not Accessible>
Image: csrss.exe
VadRoot fffffa800b8b4290 Vads 145 Clone 0 Private 571. Modified 1705. Locked 0.
DeviceMap fffff8a000008aa0
Token fffff8a00adb6060
ReadMemory error: Cannot get nt!KeMaximumIncrement value.
fffff78000000000: Unable to get shared data
ElapsedTime 00:00:00.000
UserTime 00:00:00.000
KernelTime 00:00:00.000
QuotaPoolUsage[PagedPool] 174264
QuotaPoolUsage[NonPagedPool] 17408
Working Set Sizes (now,min,max) (1394, 50, 345) (5576KB, 200KB, 1380KB)
PeakWorkingSetSize 8816
VirtualSize 50 Mb
PeakVirtualSize 63 Mb
PageFaultCount 118117
MemoryPriority BACKGROUND
BasePriority 13
CommitChar... Read more

4 more replies
Answer Match 41.16%

After installing a critical windows update i have been stuck in a BSOD on boot up loop. It didn't start until today, one day after i installed the update. Have tried system restore and was able to get onto windows again, but after a few minutes received BSOD loop again.

EDIT: I have managed to get back into normal mode after a restart, as i was typing this my computer froze up and the only way to get it back was to push the sleep button, really wondering what is going on..

A:BSOD loop after windows update

Security App

AVG is a frequent cause of BSOD's, please remove and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software. Microsoft Security Essentials and Malwarebytes are recommended from a strict BSOD perspective. They do not cause blue screens on the system as other AV products do.

Microsoft Security Essentials, Free antivirus for windows and Malwarebytes Anti-Malware Free



   Information
Do not start the free trial of MalwareBytes, unselect that option when prompted.


Update and make full scans with both separately.


SFC /scannow to check windows for corruption:

How to Repair Windows 7 System Files with System File Checker
1. Click Start
2. In the search box, type Command Prompt
3. In the list that appears, right-click on cmd.exe and choose Run as administrator
4. In the command window that opens, type sfc /scannow

9 more replies
Answer Match 41.16%

Hi everyone, I recently installed Windows 7 Home Premium.

There seems to be a problem with the windows update feature which is causing constant blue screens. It will attempt to download windows updates and stay at "0% at 0kb". I'll leave this for an hour and it will stay the same. I go to reboot the computer and it decides to install updates that it says it hasn't downloaded. I have been doing this for the past week to try and get all the updates for windows.

I have attempted two fresh installations of windows but I'm not sure if the primary partition formatted properly the second time before installing.

Every 20 minutes my computer will blue screen whenever I try to watch a video or just generally browsing on google chrome.

I am 95% sure my computer is blue screening because all the windows updates haven't downloaded, I noticed this happened last year when I didn't download all the updates after installing windows. After they were installed all the problems disappeared.

Most of the blue screens have the error code 0X000000E and NON_PAGED_AREA

I am worried by not being able to see what updates are downloading that my computer has skipped some important updates as it downloaded 248 updates and then failed and after that only installed 100.

Is there anyway to fix this? Or at least manually download all the windows 7 updates to make sure I have them all?

Thank you.

Processor: AMD FX(tm)-8350 Eight-Core Processor 4.00 GHz
RAM: 8.00 GB
G... Read more

A:BSOD caused by windows update

Hello and welcome itslikecoffee mate could you follow these if possible
Dump Files - Configure Windows to Create on BSOD
&
Blue Screen of Death (BSOD) Posting Instructions

I do have a gut feeling about your RAM too but it can wait.

2 more replies
Answer Match 41.16%

Hi there,

So in the past days ive been trying to install the Windows 10 Anniversary update from my current 1511 version.
I've tried multiple methods (windows 10 media creation tool,...) but none of them succesfully got me past 70%.
The update goes all the way untill 70% than i get a BSOD wich unfortunitly i never could read because of doing other things while the update was going. So i have no error code to provide.
Windows revert back to previous version after BSOD.

I've already uninstalled all possible virtual drives & such.

I have provided my DM log Collecter file here too.

StreakArrow

More replies
Answer Match 41.16%

Hey
I have recently replaced my defective motherboard and installed Windows 7 professional x64.
everything seemed to be ok until I enabled windows update. After some windows updates were installed, my laptop started to have BSOD.
I have tried to use some diagnostic tools but nothing changed. I have also updated Nvidia driver but my system stil get BSOD.

I have attached the .zip from SF Diagnostic Tool

your help is highly appreciated

A:Random BSOD after Windows update

  
Quote: Originally Posted by saher611


Hey
I have recently replaced my defective motherboard and installed Windows 7 professional x64.
everything seemed to be ok until I enabled windows update. After some windows updates were installed, my laptop started to have BSOD.
I have tried to use some diagnostic tools but nothing changed. I have also updated Nvidia driver but my system stil get BSOD.

I have attached the .zip from SF Diagnostic Tool

your help is highly appreciated


You replaced a motherboard in a laptop?

7 more replies
Answer Match 41.16%

After installing windows ultimate 64 bit on my new computer (first one i've ever built!) it had around 115 updates to do.

Trying to do these all at once just had it stuck on 0% downloading, so I started doing them 10 or so at a time which was fine until one point.

I think I must've installed another update from AMD (gfx card drivers) at the same time, and it didn't like it - whenever I restart I BSOD just after/while configuring updates happens (before the login bit)

Thought ah well, booted in safe mode, said 'reverting update changes' and restarted - SAME PROBLEM UPON REBOOT?!

Now i'm trying safe mode again and it's just stuck on 'Please Wait' with the windows loading circle going round and round (Again the bit that usually configures updates just before logging in)



Quite stuck...my DVD drive is decrepit and took ages to get my install to work in the first place


Any quick ideas?

Z68-AP-D3 MB, i5 2500k processor, 2*4GB kingston hyperX grey [email protected], Radeon HD 6850 GFX Card.

A:Windows Update BSOD problem?

> IMHO...May indeed be much quicker & easier to do a clean install & start again.

Clean Install Windows 7

1 more replies
Answer Match 41.16%

Hiya, I restarted my pc after updating windows 7 today and was greeted with a message about Windows recovering from a BSOD, unexpected shutdown according to the message. Clicking on the find solution button didn't do anything, the message disappeared is all. I'm not sure if this is part of an ongoing problem with occasional very slow startups or what. I've looked over the event log but been able to make sense of it.
I'm uploading the dump files in the hope that they are of some help to finding the cause(s).

I'd appreciate it if there's any help that anyone can offer, thanks

More replies
Answer Match 41.16%

hey,

I'm having a random crashing of my laptop resulting into BSOD. there is no signs before it crashes.
also my computer can't get any windows update to work even though it turned on. it says I have to restart and obviously I did, several of times, and it doesn't change.

I would love some help.
thank you.

More replies
Answer Match 41.16%

I have a Thinkpad T60 2007-4AU with Windows 7 Ultimate running on a flash drive, I used WinToUSB to install it, anyways all is well until Windows Update installed updates for a 3rd time.
Here is a screenshot of updates before I installed, this same thing happened before and I had to reinstall so I was prepared this time to catch the updates that were the culprit:



After those updates installed it rebooted and BAM! BSOD



It will not boot into Safe Mode at all, gives same BSOD, cannot do System Restore from Install disk, gives an unexpected error 0x80070057

A:BSOD after Windows Update on Thinkpad T60

Hi IceMan28,

Welcome to the 7forums.

Do you have recovery media?

1 more replies
Answer Match 41.16%

Dear Friends,

My PC config is :
1. Intel Pentium Pentium CPU G630 @ 2.70GHz Socket 1155 LGA (0x1)
2. 4GB DDR3 RAM
3. 2TB Seagate HDD

I am facing a strange issues of BSOD since last 10 days.
1st I was on Windows 7 SP1 since more than 3 months and earlier on Windows 8. Suddenly my Windows 7 got corrupted after automatic indexing process by windows, in which process showed some index files corrupted and deleted. After then windows cant start, stuck into bootloop.
I formatted Windows several times but after a few hours the same condition.
Then I decided to backup my HDD and Zero Level format of HDD. I did that, which took almost 6 Hrs.
After then I decided to go again on Widows 8. hence, formatted and installed Windows 8.1 Update 1.
Now, again after a few minutes or hours BSOD happen again and again with random Two errors :
1. irql_not_less_or_equal (storports.sys) or
2. kernel-data-inpage-error

I am attaching herewith my CPU details alongwith logs by "dm log collector"
Please help me
Thanks in advance

A:Randam BSOD on Windows 8.1 Update 1

66 reviews but no reply please help me ...

4 more replies