Tech Problem Aggregator

BSOD on Compaq Presario CQ61-401SA

Q: BSOD on Compaq Presario CQ61-401SA

Hi,
I'm experiencing the BSOD on my Compaq Presario CQ61-401SA Notebook PC. I've followed the posting instructions and would be extremely grateful for any help
Thanks
Rich

A: BSOD on Compaq Presario CQ61-401SA

Quote: Originally Posted by lilp1976


Hi,
I'm experiencing the BSOD on my Compaq Presario CQ61-401SA Notebook PC. I've followed the posting instructions and would be extremely grateful for any help
Thanks
Rich



Several of these were blamed on ataport.sys. Some very old drivers need updating including your raid, storage, and others.

I would update the old drivers

Code:
iirsp.sys 12/13/2005 5:47:54 PM fffff880`01702000 fffff880`01713000 0x00011000 0x439f418a
nfrd960.sys 6/6/2006 5:11:48 PM fffff880`0191e000 fffff880`0192e000 0x00010000 0x4485ef94
adpu320.sys 2/27/2007 8:04:15 PM fffff880`0158d000 fffff880`015bc000 0x0002f000 0x45e4c6ff
adpahci.sys 5/1/2007 1:30:09 PM fffff880`01537000 fffff880`0158d000 0x00056000 0x46377921
arc.sys 5/24/2007 5:27:55 PM fffff880`01452000 fffff880`0146b000 0x00019000 0x4656035b
SiSRaid2.sys 9/24/2008 2:28:20 PM fffff880`01a00000 fffff880`01a0e000 0x0000e000 0x48da86c4
sisraid4.sys 10/1/2008 5:56:04 PM fffff880`01a0e000 fffff880`01a26000 0x00018000 0x48e3f1f4
adp94xx.sys 12/5/2008 7:54:42 PM fffff880`014bc000 fffff880`01537000 0x0007b000 0x4939bf42
lsi_fc.sys 12/9/2008 6:46:09 PM fffff880`01713000 fffff880`01732000 0x0001f000 0x493ef531
arcsas.sys 1/14/2009 3:27:37 PM fffff880`0146b000 fffff880`01486000 0x0001b000 0x496e3ca9
ql2300.sys 1/22/2009 7:05:06 PM fffff880`01a4f000 fffff880`01bf3000 0x001a4000 0x4978fba2
vsmraid.sys 1/30/2009 9:18:57 PM fffff880`019b8000 fffff880`019e2000 0x0002a000 0x4983a701
elxstor.sys 2/3/2009 6:52:11 PM fffff880`0167b000 fffff880`01702000 0x00087000 0x4988ca9b
stexstor.sys 2/17/2009 7:03:36 PM fffff880`01a26000 fffff880`01a30000 0x0000a000 0x499b4248
amdsbs.sys 3/20/2009 2:36:03 PM fffff880`01400000 fffff880`01447000 0x00047000 0x49c3e213
iaStorV.sys 4/8/2009 12:57:17 PM fffff880`0125c000 fffff880`0137a000 0x0011e000 0x49dcd76d
lsi_scsi.sys 4/16/2009 6:13:50 PM fffff880`01745000 fffff880`01764000 0x0001f000 0x49e7ad9e
HpqKbFiltr.sys 4/29/2009 9:48:30 AM fffff880`057ea000 fffff880`057f6000 0x0000c000 0x49f85aae
HpSAMD.sys 5/18/2009 7:43:49 PM fffff880`013d5000 fffff880`013ec000 0x00017000 0x4a11f2b5
lsi_sas.sys 5/18/2009 8:20:23 PM fffff880`013ad000 fffff880`013ca000 0x0001d000 0x4a11fb47
lsi_sas2.sys 5/18/2009 8:31:48 PM fffff880`01732000 fffff880`01745000 0x00013000 0x4a11fdf4
megasas.sys 5/18/2009 9:09:46 PM fffff880`01764000 fffff880`01770000 0x0000c000 0x4a1206da
ql40xx.sys 5/18/2009 9:18:11 PM fffff880`01959000 fffff880`019b8000 0x0005f000 0x4a1208d3
MegaSR.sys 5/18/2009 9:25:54 PM fffff880`0187a000 fffff880`0191e000 0x000a4000 0x4a120aa2
nvraid.sys 5/20/2009 2:39:40 AM fffff880`011b7000 fffff880`011e0000 0x00029000 0x4a13a5ac
nvstor.sys 5/20/2009 2:45:37 AM fffff880`0192e000 fffff880`01959000 0x0002b000 0x4a13a711
Rt64win7.sys 5/22/2009 10:52:30 AM fffff880`05793000 fffff880`057cc000 0x00039000 0x4a16bc2e
IntcHdmi.sys 7/10/2009 9:45:10 AM fffff880`05a00000 fffff880`05a27000 0x00027000 0x4a5745e6

Then I would run the SP-1 update readiness tool and update to SP-1
Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 (KB947821) [May 2011]

Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2011]

Steps to follow before you install Windows 7 Service Pack 1 from the Microsoft Download Center

ISC Diary | Windows 7 / 2008 R2 Service Pack 1 Problems

links courtesy jmh

How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads

3 more replies
Answer Match 90%

Hi Can someone advise me if this notebook is suitable for the Windows 10 upgrade. I've been told that it doesn't have the correct drivers. I thought that new drivers would be installed with the upgrade? Thank you Jack

A:Compaq CQ61- 401SA ( Windows 10 )

Here's the specs: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01967531 You have the Intel 4500M GMA graphics and it is a T4400 Pentium dual processor.  Windows 10 does not have a built-in driver for your video chip. However, the internet and youtube are full of workarounds. I have installed Windows 10 on several laptops with that hardware and it will work but in most cases I have eventually gone back to Windows 7 which works better on that era of hardware.  If this is "the Answer" please click "Accept as Solution" to help others find it. 

1 more replies
Answer Match 101.22%

Hello,
I have recently upgrade my OS from Vista to Windows 7 Ultimate by clean install method.
I think so far everything works except microphone which I solved by installing updates from windows update.
So my question is, Should I install some drivers or some updates from either compaq or hp sites or wherever also? Should I try to find drivers specefic for my computer or go with the drivers which came with windows 7?
My computer model is: Compaq Presario CQ61

Thank you very much!!!

A:Compaq Presario cq61

  
Quote: Originally Posted by jav


Hello,
I have recently upgrade my OS from Vista to Windows 7 Ultimate by clean install method.
I think so far everything works except microphone which I solved by installing updates from windows update.
So my question is, Should I install some drivers or some updates from either compaq or hp sites or wherever also? Should I try to find drivers specefic for my computer or go with the drivers which came with windows 7?
My computer model is: Compaq Presario CQ61

Thank you very much!!!



If HP/Compaq have the drivers for your PC, then yes.

4 more replies
Answer Match 99.96%

Recently my fan in my laptop was extremely loud, and the laptop was getting really hot. I proceeded to vacuuming my laptop and dust came out of it.

Somehow when vacuuming my fan, it broke.

Now it does not spin, and my laptop is silent.

Within 10 minutes of running the laptop it turns off; when it turns back on it says it shutdown to avoid over heating...

Any ideas, do i need a replacement, and should i take it to a computer place???

A:Broken fan on Compaq Presario CQ61

I suggest trying to blow out more dust. Maybe a dust bunny is preventing the fan from spinning.

If that doesn't work, the machine may need to be cleaned more thoroughly (disassembled). If that doesn't work, you'd need a replacement fan.

Take it to a shop, if you can't do it yourself, and you know a place that you can trust. (Preferably not Geek Squad at Best Buy. I've read few kind words about them.)

2 more replies
Answer Match 99.96%

So recently the charger for my Compaq laptop has gone bust, and I need to know what charger I would need to buy. This has happened once before, and when I bought a new charger, the wattage wasn't correct for the computer, so that one broke too.

What I need to know, is the exact charger needed for this laptop, meaning the correct wattage for the computer. Links to websites where I can buy it would be greatly appreciated.
 

A:Compaq Presario CQ61 charger

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01966130&tmp_task=prodinfoCategory&lc=en&dlc=en&cc=us&lang=en&product=4121166
 

1 more replies
Answer Match 98.7%

AC Adaptor has been replaced
DC Jack has been replaced

http://www.youtube.com/watch?v=DCHMUOoC2Ko&feature=youtu.be

Things I have tried.

1. Taking out battery and power lead and holding pwr button for 1min
2. Reseating ram
3. Taking CMOS battery out for 10mins
4. Removing Hard Drive

Any suggestions appreciated before I start to strip this laptop down again......

TIA

Zorg.
 

A:Compaq Presario CQ61 Power No Post?

9 more replies
Answer Match 98.7%

Hi, I am trying to re-install this for some one and it turns on with the message System Disable: 73827136 Can anyone advise me on the issue? Thanks











Solved!
View Solution.

A:Compaq Presario CQ61 System Disable

Hi, Enter  62785118 Regards, DP-K

2 more replies
Answer Match 98.7%

The ownership of the above machine has been transferred to me.I wish to revert the laptop to the factory settings.The recovery options are not accessible. Not by uising the recovery manager accessed through the Windows interface, via the F11 options or through the startup screen.Windows 7 home premium came presistalled.Is there a means of obtaining the installation discs?The hard drive was replaced by the previous owner. Thank you for any help. 

A:Compaq presario CQ61-415SA Recovery

HP no longer has any Windows 7 based recovery disks for consumer laptops. There is a 3rd party market for recovery disks.  http://computersurgeons.com/p-19931-windows-7-premium-64b-recovery-kit-599363-001-for-compaq-presari... That is not precisely your model but is AMD so the motherboard is the same as yours and would work. If you are a little more adventurous and tight-fisted, we can walk you through a "clean" recovery using an OEM Windows 7 install disk and the drivers found on this site.  If this is "the Answer" please click "Accept as Solution" to help others find it. 

1 more replies
Answer Match 98.7%

So my laptop's screen is black. I'm using my tv right now with it, it works fine hooked up to a TV. I've tried everything I know of. When the laptop first starts up, It flashes the red compaq screen, then goes black. Flashes the user login screen, then goes black 2 sec later. When I do the fn+f4, the screen flashes back on, everything looks cool, then 5 seconds later it goes black again. It's not just the light, it goes completely off. (Just on the laptop, external monitor works) I've tried restoring back to factory settings, recovery, and I'm not getting anywhere! I've even tried that black screen fix by Prevx. Oh and I also tried turning the laptop off, holding the power button, etc. It has windows 7. CQ61 I think is the model.
I wasn't really sure if this was the right place to post it, so sorry if I'm in the wrong section!
 

A:Black Screen- Compaq Presario CQ61

10 more replies
Answer Match 98.7%

I have a Presario CQ61. I believe it was released in 2009.  Although it's very old I was wondering if this laptop will have driver support for windows 10. There are none as of now but will there be drivers for this laptop in the future?  Thanks.

A:Windows 10 drivers for Compaq Presario CQ61?

I am also concern since i did install win 10 on my cq61-420us. The one concern i do have is my touchpad isnt not scrolling either up and down or side to side. the synaptic drivers that are provided do not work properly

9 more replies
Answer Match 98.7%

Hi,

I recently turned on my laptop and the screen was black. After a while when it booted up, the screen came on as normal and then flashed out about 10 seconds later. I can shine a torch on to the screen when it boots up and see windows and everything but it's obviously too dark to use. I replaced inverter and lcd panel but the problem remains...

How should I go about fixing this?
 

More replies
Answer Match 97.86%

Hey to all! Since my girlfriends cq61 died, and led blinking gives me CPU failure,  i would like to replace its CPU.I have already taken CQ61 apart and CPU inside was AMD Sempron M120. Since i am replacing it anyway i tought i would put something more powerful in. What CPU-s are supported by my model? I read in this thread http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/Compaq-Presario-CQ61-415sa-Processor-Upg... That M620 - Turion II Ultra @ 2.5GHz  is supported on some CQ61 models, will it work for me? Is that best i can do?   Best RegardsMix

A:Compaq Presario CQ61-420E0 CPU replacement/upgrade

Before you focus in on the CPU I will let you know that it is much more likely the problem is the motherboard than the CPU. 

6 more replies
Answer Match 97.86%

hi all got compaq presario cq61 when imove the laptop screen i get picture etc but sometimes it goes off when moved and very dull but can still just about see whats going on .. could this really be a loose wire knowing how tight the wires normally are or an inverter problem please help
 

A:Compaq Presario CQ61 screen goes dull and on and off when moved

Sometimes the LCD inverter wires become loose or pinched in the LCD cover hinges
 

10 more replies
Answer Match 97.86%

After rebooting my system I now come to a screen to enter system password. Only thing is.. I never set this and there is no way around it.I have tried the take battery out reset CMOS trick that used to work in desktops to no avail. this is the message I get after too many password attempts. system disable key 92931076











Solved!
View Solution.

A:Compaq Presario CQ61 BIOS Password Unlock

Chick try. 23699078 Use that code to go into the BIOS.Disable all passwords that are enabled.If asked for the CURRENT password use that code.If asked for NEW password just hit enter.If asked to VERIFY password just hit enter.Save and exit. REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

8 more replies
Answer Match 97.86%

Hello All,

I have recently purchased a Presario CQ61-410 US ( http://www.newegg.com/Product/Product.aspx?Item=N82E16834107043) and am now trying to install Xp Pro on it. I am having major difficulties.

After a lot of googling, I found these guides ( http://h30434.www3.hp.com/t5/Operating-systems-and-software/General-XP-Downgrade-Guide-for-HP-Laptops/td-p/83267, http://maxeasyguide.blogspot.com/2008/04/preparations-for-winxp-installation-cd.html). I tried both solutions to no avail; I would still get a blue screen after during the initial install. Then I realized I have the AMD chipset, and thanks to this thread (http://www.techsupportforum.com/f19/...en-422183.html) was able to find the Raid drivers, slipstream them with Nlite and begin. The SATA hard drive was readable, and the installation commenced.

Here, though, is the rub. I am able to get through the basic install screen (F8 I agree, partitions, etc) and through the first "GUI" install screen (Agree to EULA, "Your Screen May Flicker for a few Seconds" etc). However, after that install and when the computer restarts and goes to load XP, I get the XP splashscreen for maybe 1-2 seconds, then the system reboots. I have no idea why. I know the install I am using is solid (it is running tried and true on another machine), and I have tried making a second boot disk, but every time I encounter the same problem: splash screen for a second, then restart.

I am not concerned about the other dr... Read more

A:Compaq Presario CQ61 and XP Pro Installation - A Living Hell

So you are trying to downgrade a machine that shipped with Windows 7 to Windows XP ? If so, that would have been a better title to the thread, as downgrades are their own special set of problems.

It also would have been a good idea to note that this is a laptop.

Given that, I am having difficulty understanding why you would need "RAID drivers" for a laptop. Does this laptop have two hard drives ?

The compaq support site does not list any XP-specfic drivers for the hard drive or hard drive controller.

http://h10025.www1.hp.com/ewfrf/wc/s...1166&sw_lang=&

Have you seen this area ?

Also I'm a bit skeptical of your Driver Genius Pro software, and am wondering if that has been involved in the situation yet, and if it's a possible cause for problems.

Is this HD parititioned, with the Ubuntu O/S on one partition ? If so, it would be better to get XP installed on a single-partition drive, then make another partition for Ubuntu.

nLite is sometimes buggy, and while it is solving one problem, it could be causing another.

A bad/buggy optical drive can also corrupt system files which can cause an install to go bad.

HD's can come from the factory with errors & bad sectors. I would run HDD Regenerator (from Hiren's) to make certain the HD is good.

17 more replies
Answer Match 97.86%

Hi,

My name is Alison, I was trying to fix my laptop and ended up making things a lot worse!!

I ran DBAN and during the process i realized i have no way to reinstall Vista Home Basic OS so i aborted the wipe after 10 or 15 mins into it.

Its a Compaq Presario CQ61. On the back of the L/T i have a sticker with a product key but when i purchased it i never got a CD for Vista. I dont have recovery discs either.

So like i said i stopped DBAN from completing the wipe however now when i turn the L/T on it says,

"NO BOOTABLE DEVICE -- INSERT BOOT DISK AND PRESS ANY KEY"

I tried doing System Recovery but the same message comes up... i also found a Vista Recovery online and burnt to cd-r but it stills says, "NO BOOTABLE DEVICE -- INSERT BOOT DISK AND PRESS ANY KEY"

Is there a way to copy a different version of windows OS from a different PC and make that a 'boot disc' I dont really understand what a boot disc is...

Im not sure what to do to fix this issue... any help or advice is appreciated if you could please explain with details that would be a big help to me.

Thanks in advance!

Alison

A:Wiped the hard drive now i have no OS (Compaq Presario CQ61)

Please do not post more then one thread about the same problem.
Wiped the hard drive now i have no OS (Compaq Presario CQ61)

Quote:




I ran DBAN




DBAN (Darik's Boot and Nuke) is a low level format utility. Once you start this, it begins to wipe the drive of your OS. Stopping it in the middle is too late. If you had just run System Recovery would have set your system back to Factory Defaults, but DBAN deleted that too. You cannot copy an installed OS and put it on a different computer. An OS has to be installed from a boot disc (a disc that boots the computer if the OS can't)
What is the Vista recovery disc that you have? Boot into Setup (Bios) and change the Boot order to be CD/DVD rom drive First Boot Device, Save and Exit. Restart the computer with the disc in and you should see the message Press Any Key to Boot From CD/DVD.If it is a Vista install DVD then you can reinstall your OS. If not a Windows disc, you can try contacting your computer manufacturer and see if you can get a Recovery DVD for your computer manufacturer Or get a Vista DVD from Ebay or Craigslist.

1 more replies
Answer Match 97.86%

Hi,

My name is Alison, I was trying to fix my laptop and ended up making things a lot worse!!

I ran DBAN and during the process i realized i have no way to reinstall Vista OS so i aborted the wipe after 10 or 15 mins into it.

Its a Compaq Presario CQ61. On the back of the L/T i have a sticker with a product key but when i purchased it i never got a CD for Vista. I dont have recovery discs either.

So like i said i stopped DBAN from completing the wipe however now when i turn the L/T on it says,

"NO BOOTABLE DEVICE -- INSERT BOOT DISK AND PRESS ANY KEY"

I tried doing System Recovery but the same message comes up... i also found a Vista Recovery online and burnt to cd-r but it stills says, "NO BOOTABLE DEVICE -- INSERT BOOT DISK AND PRESS ANY KEY"

Im not sure what to do to fix this issue... any help or advice welcome but please explain in details.

Is there a way to copy a different version of windows OS from a different PC and make that a 'boot disc' I dont really understand what a boot disc is...

Thanks in advance!

Alison

A:Wiped the hard drive now i have no OS (Compaq Presario CQ61)

Hi, Alison.

A boot disk is the hard drive which your PC boots from and starts Windows, but your hard drive has had the boot files and Windows (or some of it) wiped off it with DBAN. DBAN is used to securely wipe all data from a hard drive prior to selling it or otherwise disposing of it -- this prevents any data from getting into the wrong hands.

You will have to contact HP/Compaq and ask them if they can send you a set of Recovery CDs for your model.

Contact information for the USA: Contact HP - Phone Assist | HP

For the UK: Contact HP - Phone Assist | HP

1 more replies
Answer Match 96.6%

hi all got a post further down explaining lcd cable was no good so got another plugged it all on but now nothing coming on is there any button or anything i can do or is it another bad cable
 

A:Compaq Presario CQ61 screen LCD cable change but not working

hi all as in previous tpost further down i explained screen comes on fully when little movement of lcd cable just where it plugs to mother board so got another wire but does same thing so now know it wasnt wire so thinking what inverter or lcd backlight please help as i do not want to buy 1 then its the other is the only way finding out by buying part and testing. thanks in advance
 

33 more replies
Answer Match 96.6%

Compaq presario CQ61-223TU running Vista SP2 32bit, need ios for free upgrade to windows 7

More replies
Answer Match 96.6%

Hi all, I'm new here, registered just to get help with my problem. I have a Compaq Presario CQ61-420US Laptop, it will be a year old at the end of April 2011. It has Windows 7 Home Premium 64-bit OS. Never had a problem with it till now. I am planning on doing a memory upgrade (currently has 3.0 GB DDR2 PC6400 in 2 slots (1gb + 2gb), ordered a 2.0 GB chip to bring it up to 4.0 GB total memory)

Anyway I wanted to make sure I could do the swap myself so I unplugged the power cord, took out the battery, unscrewed the panel on the bottom of the laptop case, found the memory chips, took out both chips very carefully, undoing the tabs holding the chips in, took them out, inspected them, put them back in the way I took them out, making sure the tabs on the chips were lined up, maing sure the contacts were making contact. Put everything back together, ordered the new 2GB memory chip.

Today I went to power up the laptop, battery in and power cord plugged in and everything lit up like normal except the screen never came on, the power button stayed lit, the network status light stayed on, the power indicator was lit, two white lights were flashing at the same time every 5 seconds though, which is abnormal, one at the top right of the keyboard which I believe is the Num-lock light and one on the far left of the keyboard which I believe is the Caps-Lock light. And thats it, nothing ever happens it never turns on (blank screen) even after 20 min's. SO I held the power button down til... Read more

A:Compaq Presario CQ61-420US not booting/blank screen

I've got it figured out, I just took the 1GB RAM stick out, since I won't be needing it once my new 2 GB stick comes in, and it booted up just fine, tested the same stick in both slots to make sure one wasn't bad and its all good now.

1 more replies
Answer Match 96.6%

Hi all,I have a Compaq Presario CQ61-310SV notebook that does not want to start ? the screen does not turn on and always remains blank. At startup, when I press power button:Lit only leds for Power, WiFi (orange color) and Touchpad;The fan turns on, but the screen remains blank;Caps Lock and Num Lock keys blink 2 times in a sequence;According to these data, I found that there was an error, indicating to failure of the BIOS. But, despite the fact that on the forum I found many of similar cases, no advice did not help me solve this error. So I decided to ask you for help, describing in detail what I tried hoping that you will point to my mistakes and help me to solve the problem.So:First of all, I tried to perform a hard reset by:Disconnecting the AC adapter, battery and all external peripheral devices;Pressing and holding down the power button for about 1 minute;Plugging the AC adapter back into the notebook;Trying to turn on the notebook;Also I removed the CMOS battery for a few minutes ? no result.Next, I tried to recovering the BIOS using key press combination «Win+B» hoping that my notebook has the emergency BIOS recovery feature enabled. But the notebook silently restarts automatically after few seconds after I released the power button. How I tried to do it?I turned off notebook and I unplugged AC adapter;I disconnected the battery and all external peripheral devices;I plugged AC adapter back into the notebook;Holding «Win+B» I pressed power button and I rel... Read more

A:Compaq Presario CQ61-310SV: BIOS corruption failure

I noticed that no one can/wants to try to help and I do not know why... If I did something wrong or you need more information about my problem ? please tell me about this and I certainly will update the post.

9 more replies
Answer Match 95.76%

Hello,

When I power on my Compaq Presario, the screen remains black, the key next to the power button is orange, the Caps Lock key is blinking and a light blinks above the "home, end, num lock keys", in the upper portion of the keyboard. I have tried taking out the battery, unplugging the power and holding the power button for 60 seconds, before trying it again, and I am not getting anything...HELP!!
 

A:Compaq Presario CQ61 Black sreen-orange button next to power

Try re-seating the Ram. If that doesn't help remove the Cmos battery for a few minutes then put it back, it looks like a silver coin and should be visible near the ram.
 

1 more replies
Answer Match 74.34%

Hi  everybody!I've got a Presario CQ61 and it doesn't turn on anymore. The battery has been always low... so I used it always connected to the Power Supply... Anyway it doesn't turn on now... I've tried without battery, to swap the RAM memory, to use just a single bank of RAM and then the other one. I've tried to disconnect the wifi module... I've checked the HD and backuped it (it works)...  One thing is... when I connect the plug of the power supply.. the led turns on for just for 1 second and then it turns off... I'm sure the battery doesn't work... I've read the forum and it seems a motherboard fault... but my question is... can it be possible it's a matter of battery... I mean does the notebook needs a working and charged battery (or at least with a % of charge) also connecting it with the power supply  to turn on???  so Could it be a problem of the 0% charged battery? Thanks in advance!RegardsAlex











Solved!
View Solution.

A:presario cq61 won't turn on

Hi Alex, Unfortunately it's probably an issue with the system board - the notebook should work just fine when the AC Adapter is connected even with the battery completely removed. Regards, DP-K

4 more replies
Answer Match 74.34%

Hi  everybody!I've got a Presario CQ61 and it doesn't turn on anymore. The battery has been always low... so I used it always connected to the Power Supply... Anyway it doesn't turn on now... I've tried without battery, to swap the RAM memory, to use just a single bank of RAM and then the other one. I've tried to disconnect the wifi module... I've checked the HD and backuped it (it works)...  One thing is... when I connect the plug of the power supply.. the led turns on for just for 1 second and then it turns off... I'm sure the battery doesn't work... I've read the forum and it seems a motherboard fault... but my question is... can it be possible it's a matter of battery... I mean does the notebook needs a working and charged battery (or at least with a % of charge) also connecting it with the power supply  to turn on???  so Could it be a problem of the 0% charged battery? Thanks in advance!RegardsAlex











Solved!
View Solution.

A:presario cq61 won't turn on

Hi Alex, Unfortunately it's probably an issue with the system board - the notebook should work just fine when the AC Adapter is connected even with the battery completely removed. Regards, DP-K

4 more replies
Answer Match 74.34%

BIOS error has occurred. built-in program does not help (win + b). I need a program for usb drive. But I can not find the program. Help restore my computer. serial: CNF9409D1C product:VJ506EA#ACB P.S. I do not know much English. I used Google translator. P.S.S. thank you in advance

More replies
Answer Match 72.66%

i have athe same problem i got presario cq61 and the error is 55067138

More replies
Answer Match 72.66%

Hi
When I turn on the laptop the fan runs, the caps and numbers flash not nothing on screen. I've tried linking it with TV to make sure it wasn't the screen had gone but nothing. Any advice would be much appreciated. What I really want is to try and get photos from the computer so will consider anything as last resort.

Thanks
 

A:compact presario cq61 black screen

8 more replies
Answer Match 71.4%

Hello All,

I have recently purchased a Presario CQ61-410 US ( http://www.newegg.com/Product/Product.aspx?Item=N82E16834107043) and am now trying to install Xp Pro on it. I am having major difficulties.

After a lot of googling, I found these guides ( http://h30434.www3.hp.com/t5/Operating-systems-and-software/General-XP-Downgrade-Guide-for-HP-Laptops/td-p/83267, http://maxeasyguide.blogspot.com/2008/04/preparations-for-winxp-installation-cd.html). I tried both solutions to no avail; I would still get a blue screen after during the initial install. Then I realized I have the AMD chipset, and thanks to this thread (http://www.techsupportforum.com/hardware-support/driver-support/422183-xp-drivers-presario-cq-61-310en.html) was able to find the Raid drivers, slipstream them with Nlite and begin. The SATA hard drive was readable, and the installation commenced.

Here, though, is the rub. I am able to get through the basic install screen (F8 I agree, partitions, etc) and through the first "GUI" install screen (Agree to EULA, "Your Screen May Flicker for a few Seconds" etc). However, after that install and when the computer restarts and goes to load XP, I get the XP splashscreen for maybe 1-2 seconds, then the system reboots. I have no idea why. I know the install I am using is solid (it is running tried and true on another machine), and I have tried making a second boot disk, but every time I encounter the same problem: splash screen for a second, then restart.... Read more

A:Downgrade from Windows 7 to XP Pro on a Presario CQ61 - Splash Screen Stall

i hope u have gone to the compaq website and checked to see if your model of computer even has xp drivers available.if there isnt u might be out of luck or at the very least have a very hard time tracking down the correct drivers which is usually the chipset, audio, video, and internet. to go from windows 7 to xp u have to change the bios to be SATA ATA IDE or compatible to run xp properly. u go to the bios by tapping F2 right after the splash screen.hope this helps u.
 

1 more replies
Answer Match 70.56%

Working one day ... may have overheated (sons laptop) and next day - no power

AC charging light is solid white but battery doesnt seem to hold a charge after trying it in another computer.

Power button does nothing, no light reaction, no sounds, no fans, nothing.

Ive tried a hard reset ... no results

Cmos battery?
 

A:Solved: Compaq CQ61 - no power

13 more replies
Answer Match 70.56%

Hi guys,

I've isntalled Windows XP Professional (32) bit on a HP Compaq CQ61-231TU Machine with the help of nLite.

I had been using Windows XP on same machine. But this time, I'm not able to find its VGA / Graphics Drivers for XP.

Could someone please help me on this ????

Regards,
Farhan
 

A:HP Compaq CQ61 VGA Drivers Not Found

Here is the support and software site for the Compaq Presario CQ61-231TU laptop.
You should add and save this site in your browser favorites/bookmarks list so you can readily refer to it when needed.

The drivers and downloads section has drivers for Windows Vista and Windows 7, but not for Windows XP.
Did you downgrade that laptop to Windows XP?

That laptop appears to have either an Intel or a NVIDIA graphics device, so we need to confirm which one it has.
Go into the Device Manager and then advise the names of the entries that have a yellow ? next to them.

------------------------------------------------------------
 

2 more replies
Answer Match 70.56%

Ok guys, this one has me hung up and I would appreciate some help. A user brought me their Compaq CQ61-420US laptop that they purchased from a pawn shop. At first the PC wouldn't even turn on. I ended up having to replace the power cord and a new battery and also had to replace the motherboard fan because it was not spinning and causing the PC to overheat. After I got the hardware part fixed I found that the PC had a lot of malware. I ran a scan and cleaned the PC up completely.

Now when I try to start the PC sometimes the PC will boot just fine and other times The PC just starts up but there is a black screen and the CAPS LOCK AND SCROLL LOCK lights flash. After I completely drain the battery and recharge it then it will fire back up normally. I've also tried different RAM but the issue still persists. I'm thinking this may be a motherboard issue but wanted to post on here and get some of your opinions.

Thanks for any input!
 

A:Issue with Compaq CQ61-420US

The Compaq Presario CQ61-420US (WA976UA#ABA) laptop originally came with Windows 7 Home Premium 64-bit.

Because that laptop was purchased at a pawn shop and contained the programs and debris and issues from its previous owner, it needs to be wiped out and given a fresh start.

The factory restore recovery disc kit for it can be purchased here.

------------------------------------------------------------
 

3 more replies
Answer Match 70.56%

I have been experiencing this since returning to a regular non-usb headset, I cannot set independent headphones as default device, I have found a workaround by disabling Speakers and Headphones. I may just have to buy a new USB headset because this is driving me nuts. If Speakers and Headphones are enabled and sound is coming through my headset, minute i key my mic on Ventrilo it goes to speakers on my laptop.

A:Compaq CQ61 IDT HD Audio and Headphones

think i fixed it, disabling independent headphones worked, headphones play right without jumping ship to speakers

1 more replies
Answer Match 70.14%

While I am having my other computer upgraded, I want to use my old Compaq Presario 6000 with vista black. Once I get the other computer back, I am throwing this thing away, but it could take about a month, so I want it to at least work. I am using it now, it is very slow.
I had VLC Media Player playing a CD and I was browsing the web. It was horrifically slow. Now I am just using chrome. Right before it crashed, it froze up solid. After a while it "thawed out" but when I went back to google it BSODed on me. The computer did not show the screen for long, but once it started back up I got a box that said:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: 984D73E4
BCP3: 88D0CAE0
BCP4: 00000000
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\Mini122113-01.dmp
C:\Windows\temp\WER-73703-0.sysdata.xml
C:\Windows\temp\WERAF22.tmp.version.txt

Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

I know this version of windows isn't legit, but as I said its going to be thrown away after its done being a stand in for my dell. I can't even get a live linux distro to load. Here are my system specs:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista Black Edition™ 2009, Service Pack 1, 3... Read more

A:Compaq Presario 6000 BSOD

While I am having my other computer upgraded, I want to use my old Compaq Presario 6000 with vista black. Once I get the other computer back, I am throwing this thing away, but it could take about a month, so I want it to at least work.

I know this version of windows isn't legit, but as I said its going to be thrown away after its done being a stand in for my dell.

I really wish the person who repaired the computer 5 years ago did not install winbloat vista (and an illegal version at that) on this hunk of junk. He "claimed" that this was the only thing that would install. Click to expand...

Since you intend to junk that computer in a month or less and you admit to it running an illegal version of Windows Vista, it would be a waste of time for us to help you.

It's also a violation of the TSG forum rules to help with an illegal version of Windows, so we can't help you anyway.

I've requested your thread be closed.

--------------------------------------------------------

According to the processor and graphics and motherboard specs for that Compaq Presario 6000 series desktop, it's about 12 years old.

It was designed to run Windows 2000 and Windows XP and was never designed to run Windows Vista.

-------------------------------------------------------
 

1 more replies
Answer Match 70.14%

i bought a compaq presario c700 laptop about a year ago. i decided to install windows xp onto the laptop i managed to work everything out but the WLAN doesn't seem to work. i have tried installing drivers but every time i do it shows the BSOD and then shuts down. the only way i get internet i via ethernet cable.

A:Compaq presario c700 (BSOD)

hi,
i think driver problem.... try to installed presario c710TU chipset driver...

5 more replies
Answer Match 69.72%

Hi All,

Discovered the forum whilst troubleshooting a BSOD i keep getting on my notebook.

I don't have any specifics other than the dump file attached as this is a shared notebook and all users get the bsod which then requires a manual power cycle to log back on.

I have run the hp diagnostics utility using F2 at startup and all tests passed.

All assistance is much appreciated.

Cheers.

More replies
Answer Match 69.72%

after switching computer BSOD appears with the error messegem:
STOP: 0x000000D1 (0x00000001,0x00000002,0x00000000,0x00000001)
DRIVER_IRQL_NOT_LESS_OR_EQUAL.

A:bsod on compaq presario 6620 desktp

Hello and welcome to TSF,

Please follow the BSOD Posting Instructions so we can help you. If you cannot boot into windows normally, try booting into Safe Mode. Thanks!

Stephen

1 more replies
Answer Match 65.1%

i dont know anything about computers so i will need a detailed explanation and i need to know how to fix it!! it just stays on the compaq screen

A:My Compaq Presario 2500 wont go pass the compaq screen

Hello lilevee22,

Before the problem started was anything added to or installed on the system?

Try booting to Last Known Good or Safe Mode.

Restart the computer during the boot process repeatedly tap "F8" you should get

the Advanced Options.

Let us know if able to get the system to boot with either option.

1 more replies
Answer Match 65.1%

Hi, My Computer a Compaq Presario SR1810NX with Windows XP Home Edition SP2 is having an issue with it wont get past the Compaq Logo Screen, like, I press the power button the PC powers on, Fan Speeds up and then slows down as normal, keyboard lights flash as normal and the Compaq Logo along with the v3.48 and ESC = Boot Menu options appear on screen, the things is that it wont get past this screen, it just sits there at the Compaq screen, the keyboard and mouse dont seem to be interacting with the PC since I press ESC or F10 for boot mode or system recovery but the PC wont answer at all, I've already Disconnected power source unplugged mouse, keyboard all but PC is doing the same thing just sitting at the Compaq Logo Screen, the computer doesnt make any sound at all no beeps or anything, it wont let me access Windows at any time, recent installations well could be that I just installed a Mobile Bandwidth Card just a couple of weeks ago, and also just a few days ago I connected my iPod Shuffle 2nd Gen to the computer and the computer wont recognize it at all, not even charging, I know this might be a virus or malicious software, but my computer has barely connected to the internet in the last weeks (I couldn't pay the Internet and I had to use my friend's Mobile Bandwidth Card I mentioned before) all I did while in Internet with the Mobile Bandwidth was some schoolwork and youtube videos, I need help urgently with this since I have to deliver a very important proyect for scho... Read more

A:Compaq Presario SR1810NX Not Getting Past Compaq Logo Screen

Try a power drain.
1. Unplug power cord
2. Hold power button in for 60 seconds or more then let go
3. Plug in power cord
4. turn on the power and try to boot to setup (BIOS)

If it enters the BIOS then you should be able to just press F5 to reset to defaults and then F10 to save and exit. The PC should work now.

However, if after the power drain you still can not get in the BIOS than there is a MAJOR problem which would require some type of repair.

1 more replies
Answer Match 64.26%

Cant find the neccessary drivers for the internet have been here

http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=3559331#N337

None of the drivers for ethernet or my wireless card work ???

This is a friends latop they had a virus so i reformatted and now no internet via wirless or wired
any help appreciated.

The virus was a virut file infecter virus so i was afraid to save any of the drivers for fear of reinfection.

Edit:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 1525 Mb
Graphics Card: Standard VGA Graphics Adapter, 5 Mb
Hard Drives: C: Total - 102547 MB, Free - 89975 MB;
Motherboard: Hewlett-Packard, 30D9, 83.21, CND80437PP
Antivirus: None

If any more info is needed let me know!!!
 

A:Solved: Laptop Compaq Presario C700 (from HP Compaq)

14 more replies
Answer Match 57.12%

I friend of mine purchased this Presario in 2004. She hasn't had internet since about 2006, so she hasn't had any of the updates since then. I brought her tower home with me since I have internet to load her updates. We're trying to get it internet ready. When I brought it home last week nothing would open. So yesterday she gave me the system recovery disc. I started with the Standard Recovery, but there were too many files that it couldn't recover. So I then decided to do a full recovery. After the full recovery it was rebooting and it told me that not all the system could reload and I couldn't hit okaybecause it wouldn't read / acknowledge my mouse. So, I unhooked her computer and rehooked mine to see what her alternatives were. I found a website, they wanted to know all the things it wouldn't oload. All I can remember is that it was things that could me downloaded later like: Norton, AOL, Adobe, MSN, and QuickTime.

So, I unhoked mine and rehooked her's up (and booted up my laptop). When her's came back up it's saying: NTLDR is missing Pres Control + Alt +Delete to Restart

My question for you is there anyway I can save her conputer? She doesn't have a lot of funds, being a singe mother of a 7 yr old and I'm just a good friend trying to help her out.

Thank you in advance for any help you can provide

A:Compaq Presario

I decided to see what happened when I ctrl alt delete and then decided to do another recovery. Here's some more info (could not recover errors):
1. C:\WINDOWS\Help\SB\Training\WXPPer\Content\Wave\[email protected]
2. C:\WINDOWS\System32\ntdll.dll
3. C:\WINDOWS\System32\ntkrnlpa.exe
4. C:\WINDOWS\32\dllcache\dinput8.dll
5. C:\Windows\systme32\dllcache\licdll.dll
6. C:\WINDOWS\system32\dllcache\locator.exe
7. C:\WINDOWS\system32\viaservc.dll
9. (Black screen instead of error message)
9. C:\WINDOWS\Installe152ec/msi
10. C:\WINDOWS\Installer\1b2cc.msi

then all of after about 20% a big blue screen with following:
A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen, restart your computer. IF this screen appears again, follow these steps:

Check to make sure new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup... Read more

3 more replies
Answer Match 57.12%

How do you access the Bios on a Compac Presario 4110. I keep getting the message 162 Sytems Options not set. 163 Time and Date not set. Having visited Compac they were not a lot of help. Downloading the software recommeded by them was a waste of time, still got the above message. Tried all the usual keystrokes etc no good. Any suggestions would be appreciated.
 

A:Compaq Presario

9 more replies
Answer Match 57.12%

ok I hace a compaq that is all messed up. lets see one day the monitor would not work after a storm. Bought another, For a while the screen would be blue but change back to normal. The pc also would have a hard time starting up after it was in idle. We would do a hard start and for a while that worked. Now when I try to start it it turns on but the monitor says no vga/dvi input. There is also none of the preverable beeps that are supposed to be there so in short (well long)the motherboard is fried? So do I use it as a planter in the yard or is there a way to get it up and running. It runs on XP media center it has a micro ATX form factor motherboard it is also an AMD 64 Anthlon. ram is 256 mb 1Rx16 pc 4200 ddr2 533 mhz. With all that said can I just replace the motherboard and reinstall the reinstallation disks and be up and running? ( if it could only be so easy) What about the cpu. i know many questions here thanks for patients. Please help me. Tina
 

A:compaq presario

does your system have agp or pciex (or even pci) slot free? Is the graphics on board? It sounds like a graphics card problem, even if it is onboard. I'd try a replacement card (even if it's just a pci card) and see what happens...
 

1 more replies
Answer Match 57.12%

I have purchased a Compaq Presario 600 with an Athlon XP 2200+ processor. I do not have a copy of Windows XP to wipe it with. Is there any way with the installed XP that I can refresh this system and remove data frome previous owners? Or Can I load Win 98?
 

A:Compaq Presario 600 ??

Compaqs usually have a hidden partition with all the factory loaded software on it in an image format. As long as it does and you can figure out how to access it you could probable do that - but you almost likely need the XP Product key and may need to reactivate XP after the recovery. XP can only be install on one machine at a time - so if they are still using it you are out of luck.

Watch the boot up for any recovery messages or take a trip to www.Compaq.com and look up the info for your make/model.
 

1 more replies
Answer Match 57.12%

ok when i start up it shows the compaq logo then theres some beeps and it goes to a black screen. Any help? any way to reset all my stuff? i press f11 and it goes to some bios thing and i really dont know what to do. Thanks
 

A:Compaq presario help

16 more replies
Answer Match 57.12%

my compaq presario cq57 says system disabled 62359871..plz help. thank you











Solved!
View Solution.

A:compaq presario

@sharp66? Enter   73031277

3 more replies
Answer Match 57.12%

Hi. Does anyone know if a Compaq Presario SR1150NX does the display system support component video (Y, Pr, Pb) signal output function? Thanks
 

More replies
Answer Match 57.12%

How do you open the casing on compaq presario 5304. I don't want to breakit.\

Thanks.
 

A:compaq presario

Link to tell you all about your computer. http://h10025.www1.hp.com/ewfrf/wc/...ry&tool=prodinfoCategory&dlc=en&product=93186
 

1 more replies
Answer Match 57.12%

I have a compaq presario. I have 2Gig memory. I changed services from ATT to comcast internet. now my pc needs to be wiped clean and set up again but when I got the computer I did not get the discs. how can I do this without discs> it wont open up the internet even though I am connected.

Please help
 

A:compaq presario pc

8 more replies
Answer Match 57.12%

sir, can u help me, i can't fint my driver for compaq presario v3760TU
previously, i used vista home basic but i convert to window seven.. but i can't find my driver in hp/compaq driver web.. plzz help me..
-sory for my english so bad..

A:compaq presario

Were you at this Hp/Compaq download page ?


Software & Driver Downloads Compaq Presario V3760TU Notebook PC - HP Customer Care (United States - English)&

6 more replies
Answer Match 56.7%

I was not sure just where this question should go so if this is not the right place please feel free to relocate it.

I have THIS desk-top:

Hewlett-Packard Compaq Presario CQ2723wPC
Windows 7 Home Premium 64 Bit
AMD EI-1200 Accelerated Processor
Memory = 4GB/G(something I can't make out) DDR
HardDrive = 500GB/
I am running a PPS PE9 photo effects program that is only working about 50%

I have found the minimum requirements for running this particular program:

Open GL 2.0 capable video card with 256MB dedicated RAM
Memory 8GB+

How do I find out what kind/size of video card, how much dedicated RAM, and available memory my unit has ?

If my unit is falling short in any of these requirements, is this something I can buy and is it within my abilities to make the necessary improvements ?

I am quite mechanically/electrically adept but I know little about the insides of a computer.

Thanks for reading.
 

A:Compaq Presario Particulars ???

The Compaq Presario CQ2723w Desktop PC(H2L89AA) comes with Windows 7 Home Premium SP1 64-bit and comes with this hardware:
Pegatron APXD1-DM(Redwood A) motherboard
AMD E1-1200 APU 1.40 GHz dual core processor which has an average benchmark score of 682
4 GB of DDR3-1333 RAM
Intel Radeon HD 7310 graphics which has an average benchmark score of 171
Realtek ALC662 high definition audio
Atheros AR8152 10/100 Mbps ethernet
500 GB SATA hard drive
Super-multi DVD burner disc drive
65 watt power supply

If you wanted a desktop that's speedy and has plenty of hardware upgrade options, you couldn't have picked one much worse than this one.
Its motherboard has no expansion slot for adding a graphics card, so you're stick with its wimpy integrated graphics which uses up to 1961 MB of shared memory.
Its slow wimpy processor is soldered to the motherboard and not upgradeable to a faster one.
It has only 4 GB of RAM, but it supports 8 GB, so you do have the option of adding more.

----------------------------------------------------------------
 

1 more replies
Answer Match 56.7%

Hello. A buddy of mine has an old Compaq Presario 7470 that he is putting a new mobo in. Apparently, the old case has color-coded front panel wires. He has separated the wires and now he does not know which ones go where (in terms of going to reset button, power button, Etc). We have looked everywhere on the net for some sort of schematic for the Compaq case to figure out the color-coded wires. However, not even Compaq site has any info. Also, to note, the wires apparently terminate on some sort of small printed board before going to the lights and buttons. If anyone has any ideas I would appreciate your help.

Thank you,
LS
 

A:Compaq Presario 7470

The front panel wireing is one problem with trying to put a non Compaq board in a Compaq case . . the power supply may be another . . a lot of the OEM's use a proprietary Power supply with non standard connectors.

You might be able to Google Compaq Front Panel connectors to see if someone has worked it out ( i know of one guy who did for Dell )

He will almost certainly be better off buying a new case for the new board, and using whatever hardware he can with the new system.
 

3 more replies
Answer Match 56.7%

My friend has a Compaq Presario 5340, which I might say is being a real pain! She dropped it off to me yesterday to try to fix.
Here is my problem(s): The computer starts up fine until it gets to the Windows98 screen then it hangs. She had stated it was running slow then this problem has surfaced. I have been in the MSconfig and did a selective startup bypassing the Autoexec and config files, as stated by troubleshooters in Win98. I also have used the quick restore cd's that she has and the same thing still happens, it hangs on Win98 screen.
Does anyone have any suggestions or more troubleshooting to do before I boot it out the door? Also have thought about formatting the hard drive to wipe everything out, but I have heard it is difficult to reload programs on Compaq's. I don't have any idea if she has added any new software or hardware to this computer.
Please Help!!!!
 

A:Compaq Presario 5340: HELP!!!!!

Check the CPU settings in the bios and make sure that the CPU is not running overclocked.
If this is one of those 599lmr motherboard Compaqs, it'll do just what your saying if the CPU is set wrong.
 

3 more replies
Answer Match 56.7%

My landlady's Compaq Presario SR1103WM is acting up and I'm pretty certain it is the PSU going out because the symptoms are the same as my PC had when it's PSU went belly up on me. It starts booting up fine until Windows XP Home starts loading, than it resets. I used a WinXP disk to repair the boot files and MBR with no effect, so we decided to reinstall Windows (been needing to do that anyway). Before doing that though, I was going to try recovering pictures of her grandkids by using a Linux Live CD, and ran into the same problem with it, so that eliminated Windows problems.

To the best of my knowledge, that leaves the PSU (likely) or the memory (possible) as the probable causes. I running Memtest86+ on it tonight to eliminate that cause.

Please correct me if I'm wrong in my diagnosis or if I am missing anything, but if I'm right about the PSU, that brings me to my main problem. I have heard that many Compaq models have proprietary PSUs so that you can't use off-the-shelf parts to replace them and have to buy one from them at a higher price. Is that the case with this model or can I order one from Newegg? I looked up the PC on Compaq's web site, and it didn't even say what PSU it has.

Thank you in advance.
 

A:Compaq Presario SR1103WM PSU

Memtest86+ has compleated 34 cycles with zero errors. Looks like it is the PSU.
 

1 more replies
Answer Match 56.7%

Hey all,
Does anybody know if all of the motherboards in the Presario V6000 laptop series are the same size and shape?

More specifically, does anybody know if a V6000 motherboard would fit in a V6310 case?

If you need more info, let me know.

Thanks!
 

More replies
Answer Match 56.7%

i have a lap compaq presario v3417la i used win vista , then i move to win 7 ultimate , and disconect sound device , can you help me ? please

-[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]------------------------------------------------------------

Versión EVEREST v2.20.405/es
Sitio Web http://www.lavalys.com/
Tipo de informe Asistente de informes
Ordenador LUISGUZMAN-
Generador Luis Guzman
Sistema operativo Windows 7 Ultimate Media Center Edition 6.1.7601
Fecha 2011-08-19
Hora 12:59
--------[ Resumen ]-----------------------------------------------------------------------------------------------------

Ordenador:
Sistema operativo Windows 7 Ultimate Media Center Edition
Service Pack del Sistema Operativo Service Pack 1
DirectX 4.09.00.0904 (DirectX 9.0c)
Nombre del sistema LUISGUZMAN-
Nombre de usuario Luis Guzman

Placa base:
Tipo de procesador Mobile , 2000 MHz
Nombre de la Placa Base Wistron 30D6
Chipset de la Placa Base Desconocido
Memoria del Sistema 960 MB
Tipo de BIOS Phoenix (11/27/08)

Monitor:
Tarjeta gráfica GeForce 7150M / nForce 630M
Tarjeta gráfica GeForce 7150M / nForce 630M
Monitor Monitor PnP genérico [NoDB]

Almacenamiento:
Controlador IDE Controladora estándar PCI IDE de doble canal
Controlador IDE Controladora estándar PCI IDE de doble canal
Controlador IDE Ricoh Memory Stick Controller
Controlador IDE Ricoh MMC Host Controller
Controlador IDE Ricoh xD-Picture Card Controller
Disco duro WDC WD1600BEVS-60RST0 ATA Device
Lector óptico MAT... Read more

A:Compaq presario v3417la

Not too sure what you need help with.
Do you mean the sound does not work since upgrading to Windows 7?

This is because the existing audio driver is not compatible with Windows 7, and unfortunately HP/Compaq do not have any Windows 7 drivers for the Presario V3417LA. The Windows Vista driver might work. You can download it from here:
http://h10025.www1.hp.com/ewfrf/wc/...3&lc=en&cc=us&dlc=en&sw_lang=&product=3437668

Click the 'plus' symbol next to "Driver - Audio", then click "Connexant high-defintion audio driver".

If this driver does not work you will have to use Google Search to try and find one that does.
You really should have checked what drivers were available from the Compaq website before upgrading to Windows 7.
Some older laptops are just not suitable for upgrading to Windows 7 because of possible driver issues.
 

1 more replies
Answer Match 56.7%

I have a compaq Presario and I want to format the hard drive. This unit has a c:PRESARIO with 68.56 GB 16.7 used and 51.7 free File system NTFS and d: Presario_RP 5.98 GB, 4.49 Used, 1.49 Free, File System FAT32
Is there anything I need to know befor I do this?
I can not find the org. disc that came with the computer, but i have my xp disc from my lap top will that be ok and or do i need that
I ran the malware and found 16 viruses. A lot to do with tool bar locations or something.
The system is still running extreamly slow takes forever for the "MY COMPUTER" screen to load.
I did find that it runs like new in safe mode if that helps.
Please help
Paula

A:Compaq Presario very slow

I have a compaq Presario and I want to format the hard drive. This unit has a c:PRESARIO with 68.56 GB 16.7 used and 51.7 free File system NTFS and d: Presario_RP 5.98 GB, 4.49 Used, 1.49 Free, File System FAT32Is there anything I need to know befor I do this? I can not find the org. disc that came with the computer, but i have my xp disc from my lap top will that be ok and or do i need thatI ran the malware and found 16 viruses. A lot to do with tool bar locations or something. The system is still running extreamly slow takes forever for the "MY COMPUTER" screen to load.I did find that it runs like new in safe mode if that helps.Please help PaulaIf you have all of your pic`s, music and anything else of importance backed-up then you are all set.You probably did not get any discs with the computer. The D: drive is a "restore partition" = RP. This is an exact image of your computer when you first bought it. To use it: When you first start the computer there will be a black screen with probably three different choices of keys to press. One of them will be something like system restore or restore. Hope you get the idea. Select the proper key and follow the onscreen prompts.One other option may be to go to the HP\Compaq (HP bought Compaq) site or call them. You may be able to get the discs for a small fee.

1 more replies
Answer Match 56.7%

ok the dilemma is simple ok i bought this new laptop for the wife then it came with a built in webcam truth is i don't want that webcam so i bought another webcam that i am trying to use on msn but the laptop states found new hardware but doesn't install my webcam is usb ported it says m style on the cam the only thing it uses my wife states that she can access the cam thru the control panel but not in msn why is this occuring if someone could get to me asap would be greatly appreciated thanks in advance
 

A:Ok new laptop compaq presario

You may need to disable the original webcam

You can disable it by going to: Device Manager (Start->Run-> Devmgmt.msc)

Then locating your Webcam (that you don't want to use) and then right click on it and select disable

Then go back to MSN and use the settings to set up the new webcam
 

1 more replies
Answer Match 56.7%

I have a Compaq Presario 1200 laptop that won't come out of hibernation. With either the battery or A/C cable the power on light on the keyboard will come on after the power switch is pressed and a couple of seconds of clicks from the vicinity of the 3 1/2 floppy or the hard drive area but nothing else - no beeps or anything on the screen.
I talked to Tech support (I am out of warranty) and tried their suggestions - removing all power and pressing the power button and then reinserting the battery; turning it off, removing power for 24 hours and then turning it back on.
One suggestion I had from another source was to remove the CMOS battery but I can not figure out how to access that part of the case. I can get to the hard drive but not the battery.
Any suggestions or directions on removing the CMOS battery?
 

More replies
Answer Match 56.7%

Not sure if anyone can help here but worth a try.
I brought a new compaq presario desktop pc just before xmas. I got sick of all thier crap on it so I re-installed with another copy of windows xp prof sp2. Now I am having problems and want to go back to the original installation on the compaq.
Didn't do any restore disks as no-one explained this to me then. The install partition is still on the compaq but when I load up comp and try to press F10 to do it, it doesn't work (just keeps loading into windows). I can not figure out how to get the reinstall to start and am not sure how to do it manually. My brother has tried to manually start it in windows but it doesn't like this. Have tried changing the boot drive using the Esc and F1 keys as per start up options but it has the drive as grouped and can not specify H drive (where compaq restore is).
Any suggestions welcomed before I have to find more money to buy disk!
My brother has suggested that maybe we can delete the c drive partition therefore forcing the h drive to run, but want to leave this as a last result in case it doesn't work.
Thanks to anyone who reads this.
Ange

A:Need Help With Restore Of Compaq Presario

Ok Frad, if you want to restore the system to the way it was when you purchased it, the best way is to place the restore cd in your drive and restart. when the option comes up press what ever key you ned to to enter setup. scroll through the setup untill you can change the boot options. place the cd drive as your 1st boot option. when you have done that, save and exit setup. when the system reboots, you will be given the option to restore. READ THE WARNINGS CAREFULLY, THIS WILL FORMAT THE HARDRIVE AND ERASE ALL THE DATA THAT YOU HAVE. I recomend that you burn a copy of all your important files prior to doing this and good luck.

Printboy67

4 more replies
Answer Match 56.7%

Hi Everyone, I am new to this site and really need your help. I have a compaq presario desktop sr1725an and I need to run a complete recovery on the system. I have tried everything the hp site tells me, but so far nothing works. I really need recovery discs for this computer, it currently has xp loaded. Does anyone know where I can download recovery disks for this computer, I want to restore it to its factory settings.

Please, any help would be great.

Thanks!
 

A:Compaq presario sr1725an

7 more replies
Answer Match 56.7%

I have a PIII 733mhz Compaq Presario 5900T that I need some help with.

1st thing is that my harddrive is broken and I am looking into getting a replacement for that, but my question is:

What kind of disks does this computer support?
I tried a 160gb samsung disk, but it hangs at compaq logo screen so I guess it's too big. (hoping to be able to change this through a bios update later)

2nd part is that when I found a matching disk, how will I restore bios on it? I have no restore cds left...and I suppose this computer stores a part of its bios on a hidden partition like all other compaqs.

The 384mb ram limit is fine with me since I am gonna run Linspire linux on it.

Anyone that can help? I tried Compaq support and got no help whatsoever.
 

More replies
Answer Match 56.7%

I have a Compaq Presario 2700T with problems. When I press the start switch it runs for about five seconds and then shuts off. It doesn't even run long enough to give me any screen image. It does this on every attempt to start the computer now. Prior to that it flashed a blue screen on a previous start attempt but not long enough to read what it said.
Any ideas what is going on?
 

A:Compaq Presario 2700T

Does this happen when the power connector is attached?

Are there any lights on when the power connector is attached? For example, does the battery charge?

Do not be rough with the cable, but the power plug that connects to the laptop, does it make any difference if you gently bend the cable around or move the connector in the socket? (Occasionally over time either the cable becomes damaged or the socket becomes loose)
 

2 more replies
Answer Match 56.7%

Original 500GB HDD was showing signs of eminent failure.I successfully cloned the drive to a new 400GB HDD, using NORTON GHOST.(I know this drive is smaller than the original, but less than 30GB was being used on the original)Anyway, The new drive would not boot.Assuming that the problem may be OS license-related, I ordered the Compaq Recovery Discs Set.While waiting for the Recovery Disc Set to arrive, I purchased a Sandisk 120GB SSD.(Again, I know that the 120GB SSD is smaller than the original 500GB HDD that came with the computer, but I do not plan to even fill it 50%.)Anyway, The Recovery Disc Set arrived and I attemted to use it on the new Sandisk 120GB SSD.The process seemed to go fine, all 3 discs of the set seemed to copy, and then the computer restarts and a screen displaying files flying across the screen from one folder to another stays there forever.I waited 15 hours and came back and I still just see:Files flying across the screen, from one folder to another folder.The drive activity light is blinking, but obviously there is a problem. Some possible related facts/information:The SSD is detected in the BIOS.The SSD Checks good, by the BIOS Diagnostics "Smart" Tests.I cannot find anywhere in the BIOS to disable AHCI, it only shows SATA or IDE.Current Bios version is 5.5.5, and I have been unable to find a BIOS Update anywhere.Current Memory (RAM) is 4GB (2x2GB), which was an upgrade since the machine was originally purchased. Can someone p... Read more

A:Compaq Presario SSD Upgrade

Greetings, I use Paragon Professional Disk Imaging software. Try Macrium Reflect free. Disk cloning is also included in the free version. Cheers!

1 more replies
Answer Match 56.7%

I have a compaq presario. The bios are poop. Does anyone know if there is a way to update the bios with areal manufacturer? Or am I stuck with compaq's bios? It would be really nice if there was a way to find out who makes the bios for them and update it. Any info would be great. Thank you in advance!
 

A:Compaq Presario Bios

You need to get the BIOS from Compaq. While the board maybe MADE by another company, who knows what slight changes to the specs were made.

When you do your next upgrade, build your own and get a real BIOS.

Like working on a NEW Dell PC, almost NO Options, no Temp monitors nothing.. junk... its a DELL!
 

1 more replies
Answer Match 56.7%

My sister is having major problems with her Compaq Presario CQ57 (running Windows 7). I have been trying to help her with it but, I am about to literally throw it from a very high window. I'm thinking it has a malicious program lerking inside it. I am trying to get it into safe mode and am having a hell of a time. I want to do a scan on it and I believe it is better to be i safe mode.

There is no F8 option so that is out. I tried msconfig and computer says it can't find the file,(by the way it says that to any program I try to install). Since I can't get anything to install and everything I seem to try hits a brick wall I am at a lost on what to do. Every time someone gives me some advice on how to maybe fix this I can't seem to get past the first step!!!HELP!!!! She has only had the computer for a couple of months. This is her first brand new computer and it seems she has made a very bad choice!

The Wireless has already quit working too! Buyer Beware!!! Please can someone please help me out?? I am desperate.

A:Compaq Presario CQ57

How about booting to recovery partition if available to restore to factory condition or system restore?

2 more replies
Answer Match 56.7%

My Compaq M2000 Presario fan will not work. I have even bought a new fan and it still does not work. Is there a thermal switch on the motherboard that i could use to turn on the fan. Help is much apreciated.
 

A:Compaq M2000 Presario Fan Help

6 more replies
Answer Match 56.7%

Hi All

I realise this is possibly not the right room for this, but here goes.

Compaq presario V5000 laptop started giving consistant BSOD on start up, no boot (even safemode possible)

*** STOP 0x000000c2 (0x00000043, 0xDFFE8000, 0x00000000, 0x00000000)

Ran linux did memory and hard drive check, seems ok. Have got all my data off and trying to recover the computer to a working state, but turns out the Compaq recovery DVDs i made invoke windows XP, this of course brings on the blue screen of im at the end of my tether.

Any suggestions, as I havn't got a scratch startable version of windows (as they don't give away them anymore.)


Thanks in advance.

A:Compaq presario recovery

Hi.
ok why can you use your restore cd to boot the the laptop with pressing F11 when booting the laptop,then follow the instruction.

N.B
i also have problem with mind i can not used it anymore because i have accident i lost my restore cd for compaq presario v5000.
can you please copy and send them via my e-mail,[email protected]
if you done mined.

1 more replies
Answer Match 56.7%

I hit the power button this morning and nothing happened. Tried unplugging and holding power button in and still nothing.
 

A:compaq presario will not turn on

Please post your system specs, exact model Presario, include any upgrades or modifications please.
 

1 more replies
Answer Match 56.7%

I was trying to upgrade my brother's Compaq 5340 from Windows 98 to XP. I kept giving me errors on the C: drive but would continue to work in Win98. I moved the valuable files onto another drive and formated C:

Now I cannot install anything on drive C: . None of my Windows installationd discs with work with it.

It keeps saying that there is a compressed file or directory on the drive or that it is write protected.

I booted of A: drive with a Win98 startup disc but cannot access C: drive.

What Is going on? Did I screw something up?
 

A:Compaq Presario 5340

Boot off a floppy disk and FDISK the drive - remove all the partitions and then create a new Active/Primary partition. Also make sure that Antivirus/Bootector protection is off in the BIOS. Then boot off the XP cd and format the drive and do the install. To boot off the CD you need to set thej boot order to CD-ROM, A, HDD in the bios. You can also delete the partition from the XP cd if you boot off it.
 

2 more replies
Answer Match 56.7%

Its a presario 5000, i ran the belarc advisor tool to see what kind of memory i have, it said i have PC133, so i ordered some more, well, for the heck of it, i removed the memory in it to clean the board and the sticker on the factory memory says PC100!! so will PC133 memory still work with this thing even though it has PC100 in it now?
thanks!
 

A:compaq presario memory help..

7 more replies
Answer Match 56.7%

yeah, it's ancient, but i'm just getting it up and running to sell it. i got it from a friend. ok, my question is- why is the cpu fan missing? and why don't i see a set of pins on the motherboard for the fan?
i thought all cpu's needed a fan, so where's the power supply for it? (the cpu is a pentium 120mhz)
 

A:compaq presario 4112

Hi, Kerri Ann!

Not necessarily. A 120MHz may not need a fan on the CPU. It will more likely have a large heatsink, and an exhaust fan at the back.
 

1 more replies
Answer Match 56.7%

We have an old 2001 compaq 5020 computer. The last screen you see when you shut it down is , it is now safe to turn off your computer and then you have to shut it down manually. How can we change this to turn off automatically. We are running Windows XP.
Thanks
Bilmac

A:Compaq Presario 5020

Hello bilmac1. Probably, when Windows was installed, it failed to recongize the BIOS as ACPI compatible. Or simply, APM is not enabled: check under "Power Options Properties" if the tab "APM" exists; if so, check the option "Enable Advanced Power Management Support" (if it's checked, uncheck it, weird as it sounds).

1 more replies
Answer Match 56.7%

Had to default my laptop now when it starts to load windows
says starting windows setup is preparing computor for first use
welcome message comes up then says windows could not complete installation,.to complete restart the installation
i press ok and goes over again starting windows
 

A:Compaq presario co61

What's the part/product number(P/N) on that Compaq Presario laptop?

You appear to have a CQ61 series model, so we need to confirm which one you have.
There should be a dash and additional characters after CQ61.

--------------------------------------------------------
 

2 more replies
Answer Match 56.7%

All of a sudden, my Compaq Presario, Windows XP, won't boot up past the black "COMPAQ" screen. None of the keyboard keys respond (we've tried three different keyboards). All the lights light up when we first turn on the computer, but then it just stops at the black screen with boot options, but none of the keys on the keyboard will do anything. Does anyone know what the problem might be?

A:Booting Up Compaq Presario

Have you tried booting into "Safe Mode" to see if its a software/driver issue?

4 more replies
Answer Match 56.7%

I am not near this machine, it's 60 miles away, so I can't look myself, but can anyone tell me if this is one of those pieces of junk that has the BIOS on the Hard Drive, or is it on the Mobo (like normal) ?

The person wants me to rebuild it, and I have never rebuilt a PC that has the BIOS on the HD.

What do I need to watch out for ?

What I usually do is FDISK the HD and then Format it, and go from there.........

Compaq Presario 7470
 

A:Compaq Presario 7470

I believe its a normal setup. However, even if its not the compaq partition is hidden. It is either completely invisible to FDISK or its listed under Non-DOS partitions in FDISK. As long as you don't touch that you'll be just fine.
 

2 more replies
Answer Match 56.7%

my mother bought a compaq presario 5304 from a family member.when she got it,there was no system recovery disk for it.there was a disk that was for the 700's series.her computer will not detect the right drive because they used the wrong recovery disk for it.how do we get the computer to recognize and install its original drive.it was 56k.i am pretty much computer illiterate.john
[email protected]
 

A:compaq presario 5304

hmm system recovery. I'm not too big on using that. My overall suggestion would be go into dos at the startup and do a simpe C:/ format or is it the other way doh... Anyways at startup of windows press oh F8 I believe for systems with win 98 or higher but if you got win95 its either f5 or f8 or you can make a boot disk and do it that way.
 

1 more replies
Answer Match 56.7%

I have had this PC since 2001 and it seems to be in good working condition. It originally came with Windows ME and two years ago, I upgraded the OS to Windows XP. I need help to clean the computer and start over as new. How can I do this?

Thanks

More replies
Answer Match 56.7%

I have a Compaq Presario, Authentic AMD K-6 3D Processor.
In order to run DirectX 8.1 for my 5 year old to play his new TONKA games, I need to upgrade the video card. I have looked on the TRIDENT website (with no success) and was wondering if anyone has a newer version than I have. This is what I have:

Trident Blade 3D/MVP4 (63)
Trident Microsystems
Chip type: Blade 3D/MVP4
main driver trid_p3d.drv
v. 4.12.01.2214
Mini VDD: trident.vxd
VDD: *vdd, *vflatd
 

A:Compaq Presario 7360

6 more replies
Answer Match 56.7%

Hello all,

My 92-year-old grandfather -- who lives on a little island off the coast of Maine -- has emailed me regarding a problem that he is having with his ten-year old computer. If anyone out there would be kind enough to offer some advice on how to fix it, it would be greatly appreciated. There are no computer shops on the island, but my grandfather has plenty of tools and has worked extensively with radios throughout his life, so with some direction I have little doubt that he can make the repair.

This is an unconventional post, to be sure, and I don't really know anything about his computer ... but I think he has done a reasonable job describing the issue:

Hi Chris!
I have a severe computer trouble that I brought on myself.
First I will describe the computer and it's programs.
It is a Compaq, Presario 1200,
at least 10 yrs old.
Along the front edge of the top it has three indicator lights at the
left of center and three on the right.

The ones on the left are operating lights of which one shows when
the charger is in and the left most one shows when the computer is
started up by the button which is in front of the screen.
The one between these two shows the operating conditions, I believe,
as it usually flickers in concert with whatever is going on.
The three on the right each has a "locked padlock" symbol.
For programs it has Windows 98, Juno V.4, Intel Create and Share
and some other good things.
Everything has been working good.
I do... Read more

A:Compaq Presario Issue

What a sweet letter from "Grumpy Gramp"! Has he tried to plug in to another outlet completely? I would take the battery out completely and try this.

fyi: http://en.wikipedia.org/wiki/Compaq_Presario_1200
 

1 more replies
Answer Match 56.7%

How do you get to the HHD drive in the compaq presario 1456VQLIN?
 

A:Compaq presario 1456vqlin

I'm not finding that model so that must not be the model number. Typically, you turn over the laptop and the hard drive should be under a large panel...
 

1 more replies
Answer Match 56.7%

I have a Compaq Presario C74EM which I just installed Win 8 RP. The sound did not work.

Eventually I was able to find and install drivers - sound still didn't work, but after following the advice on a forum post, I put the computer to sleep, waited a few minutes, woke it up, and sound now works.

This computer came with Win Vista home. Supposedly the Compaq Win7 drivers will work with Win8. Compaq (hp) has utilities that will go through any/all drivers, and update to the latest.

Does anyone know how to get this going under Win 8?

More replies
Answer Match 56.7%

I have a compaq presario c300 notbook. It will not boot. I get the compaq screen, then nothing. It will not boot to the cd either. The backlight comes on, so it's not that. Please help. I'm lost.

A:compaq presario c300

Welcome to TSF....

To get it to boot from the cd you have to change the boot order in BIOS. This can be done during boot up when you can open the BIOS and set it.

The cd you used is it the recovery cd for the computer?

1 more replies
Answer Match 56.7%

I am upgrading a Compaq Presario 5000 model #5WB220 with a very low 15 GB hard drive for a friend. It currently has Windows ME and there is no Compaq Restore CD.

I have increased the memory to 320 by adding an additional 256 MB RAM.

I am wanting to totally replace the 15GB hard drive with an 80 GB hard drive and load Windows XP Home.

The problem I am finding out is that Compaq has propriertory info on a partition within the existing drive. From what I understand without the Restore CD, I can't put the new drive in.

I'm wondering if there are any other alternatives to doing this.

Can I install XP on the existing drive and then transfer all the data (to include the compaq proprietory info) to the new drive in a slave position?
 

A:Upgrade Compaq Presario

10 more replies
Answer Match 56.7%

If any here has an HP Pavilion or Compaq Presario PC or Notebook (current models), they will notice that the fan kicks in when needed. The fan doesn't really annoy me as much on my Compaq laptop, but on my HP desktop it is really annoying and loud. I think it forgot that it was only supposed to come on when needed because it is now on almost all the time. Can someone explain to me how this fan works in more detail and how I can possibly adjust when it comes on or at least the fan speed, SOMETHING!!! Thanx in advance.
 

A:HP/Compaq Pavilion/Presario Fan

If the fan kicks in more then it used to it might mean that the computer needs a cleaning. These fans are temperature controlled and only kick in when a sensor detects the temperature to be at a certain level. Sone fans need to be on at all times - like the one on the CPU - but it may be possible to control it speed with software or BIOS settings.

Speedfan comes to mind, do a google search for it. It will list the motherboard temps and allow fan speed adjustment if the board supports it. If you have a case fan you can control its speed, as for the CPU fan - thats best left on a full speed.

First, open up the case and see if it needs a cleaning. You can also replace stock fans with quieter ones if they are too loud or wearing out.
 

2 more replies
Answer Match 56.7%

i have a compaq presario SR5210NX with windows vista home premium ,it has a problem in/windows/system32/ntkrnlpa.exe,the state is 0xc0000225 and the information says the kernel doesnt responde or isnt working .it says introduce the installation disk windows ,but i dont have it and i couldnt enter to the recovery system

More replies
Answer Match 56.7%

Hey fellas, Im currently trying to install XP on this box. Problem being, is im having a hard time getting the drivers for the mobo and such. I dont have the cd's and such for them either. The os in on there just fine and the network card and such work dandy, but i cant seem to get the USB ports enabled. I checked in the bios and i cant locate anything and im starting to worry.

Anyone got any help for me!
 

A:Compaq Presario 5600S

More specifically im looking for VIA vt82C598AT chipset drivers.
 

1 more replies
Answer Match 56.7%

I have the best luck with computers ever. My brother wanted me to format his oldschool compaq presario 5000 computer so I formatted with the win XP setup disk, when I went to restart to start installing windows after the format it takes me to a blank screen that reads:
"Couldn't open drive multi(0)disk(0)rdisk(0)partition(1) NTLDR: couldn't open drive multi(0)disk(0)rdisk(0)partition(1)"

I have booted with floppy and fdisk, fdisk /mbr, formatted about a million times using FAT and NTFS file systems, I have deleted all partitions, did everythinig I can think of.

Does anyone have any idea of how I might solve this and install windows? I know the HDD isn't shot because I can put it in my other comp and actually do a full win install, but when I place it back in the compaq, it brings me to the same error screen.

Any help would be greatly appreciated. Thanks guys.

one more thing, I am kinda a n00b at this sorta stuff so any ideas please give me the *hold my hand* explination and guide me what to do with step by step instructions, thanks again guys!

A:Compaq Presario problems PLZ HELP!

Check in your BIOS and make sure you have the right HDD displayed. It would be best to set it to auto. Also you could try setting the BIOS back to the default values.

3 more replies
Answer Match 56.7%

My aunt has a compaq presario desktop pc and for a couple of months she turns on the computer and it takes like a half hour to get to the desktop then it goes really slow.it goes a little faster when i shut off some programs but still not at full speed.it should run fast it has a intel celeron processor 2.66ghz,256 mb ram but it is rather slow.she didnt have any problems with it when she first got it about a year and a half ago.any help will be appreciated.

thank you
 

A:problems with compaq presario

9 more replies
Answer Match 56.7%

Appreciate some assistance.

Anyone know how much memory the Compaq Presario EZ 2605 (out of the box) had?

Believe its processor is an Intel Celeron 633MHz.

Trying to help someone out who knows very litttle about computers and cannot tell me how much memory the pc has. (He does not understand how to look up the info in My Computer/Properties, etc.)

Asked Compaq a week ago, but still no answer.
 

A:Compaq Presario EZ 2605

Manufacturer Compaq
Model Presario EZ 2605
Maximum Memory 512MB
Standard Memory 64MB removable
Number of Slots 2 (2 banks of 1)
 

3 more replies
Answer Match 56.7%

Installed with Vista Premium, i've realised that it has a Recovery Partition and im not sure how to use it. my computer came with a windows vista disc, but im trying to recover Vista and im not sure how to do it. maybe someone can give me a heads up on how to do it.
 

More replies
Answer Match 56.7%

I have an old compa presario 1277 who supposedly had something called a monkey virus on it. This virus supposedly wipped out all the drivers. Someone reistalled them. However, my husband insist the monitor display does not look like it did and that it use to play movies. Do you have any suggestions?
 

A:Compaq Presario 1277

Is it this Presario 1277 notebook: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=95012& ?

If so try reinstalling the Trident Display Driver from the available downloads.
 

1 more replies