Tech Problem Aggregator

BSOD. Bugcheck. Sevenforums diagnostic tool Log. Random restart

Q: BSOD. Bugcheck. Sevenforums diagnostic tool Log. Random restart

Ive got no idea what happend. was just browsing the web and all the sudden a bsod. Looked in the logfile, and it says a fault was found with one of these lovely ''bugchecks''

Nirsoft bluescreenviewer said it was these three:
atikmdag.sys (+277ce)
dxgmms1.sys (+c48b)
ntoskrnl.exe (+1f0e80)

I also used Sevenforums Diagnostics Tool and ill link a download here:

All help is very appreciate ;D

A: BSOD. Bugcheck. Sevenforums diagnostic tool Log. Random restart

I use Utorrent and have never seen this problem. Can I suggest a simple reboot of your system and se if this goes away?

4 more replies
Answer Match 89.88%

Hello.
I've been getting random BSOD. It doesn't seem to be connected to any one program or situation but usually happens when i'm playing games. I built this computer myself:
Asus Sabertooth Z77 MB
Intel i5 3.4Gh
NVidea GTX 560 GPU
8 Gb Ram

I have attached my zip folder for the SF Diagnostic Tool as instructed by a couple other threads on this site.

I don't know if it's related to the BSOD but i also just recently have had games randomly crash on me as well. Starcraft II, League of Legends, Dead Space 1 and 2.
This has all just started happening in the last week. I have had no such problems before then.

I'm sorry if i'm leaving out an important piece of information. Please tell me what you need from my end, and thank you very much for helping me out.

A:Random BSOD, SF Diagnostic tool zip file attached.

Welcome aboard, brook4.

Your crash dumps indicate memory corruption mainly, with mostly a bugcheck 1A.

Bugcheck 1A may occur for a corrupted device driver, too. So, before blaming the RAMs, we want to make it sure that it is not any driver that is causing the crashes. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

Depending on this, we will decide our next step.

9 more replies
Answer Match 81.06%

Hi,
I used the memory diagnostic tool on Vista, select the option to check right away. and my screen went blank, actually 2 tone, and I am unable to restart windows. I have no mouse and cannot see anything but a 2 tone screen 3/4 blue and 1/4 white, colors sometimes change.
Thanks!
 

More replies
Answer Match 72.24%

Greetings. I am having BSOD issues on a computer so I downloaded the SF diagnostic tool to gather the required crash info but it too fails. I right click to run as admin it launches correctly but when I hit Grab All it bombs telling me it cannot find the path \\desktop. It does this both on the computer I am having the BSOD on and my normal workstation.

Any advice?

A:BSOD and SF Diagnostic Tool Error

Try again. If needed, disable your antivirus and run the tool as admin.

3 more replies
Answer Match 72.24%

I have been having random BSOD every few days. I tried to install the SF diagnostic tool, but I keep receiving errors and the last time I got a BSOD and rebooted and it ran and BSOD at the end of it. I looked inside of the SF folder that it created and it is empty. Now when I run it it gives me errors:

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.IO.IOException: Could not complete operation on some files and directories. See the Data property of the exception for more details.
at Microsoft.VisualBasic.FileIO.FileSystem.FxCopyOrMoveDirectory(CopyOrMove operation, String sourceDirectoryPath, String targetDirectoryPath, Boolean overwrite)
at Microsoft.VisualBasic.FileIO.FileSystem.CopyOrMoveDirectory(CopyOrMove operation, String sourceDirectoryName, String destinationDirectoryName, Boolean overwrite, UIOptionInternal showUI, UICancelOption onUserCancel)
at Microsoft.VisualBasic.MyServices.FileSystemProxy.CopyDirectory(String sourceDirectoryName, String destinationDirectoryName, Boolean overwrite)
at SF_Diagnostic_Tool.Form1.Button1_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
... Read more

A:BSOD while running SF Diagnostic tool

Search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. Zip them and upload those.

Also upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.

9 more replies
Answer Match 71.82%

Hi!

The SF Diagnostic Tool couldn?t create the file I guess that you announced would end up at my desktop as expected. The file that you suggest me to compress and deliver as an attachment either were invisible or failed to be created by the SF Diagnostic Tool. If you have any comments of how or why it won?t end up as expected I would be glad to hear suggestions and ideas of how I can fix this as well.

I don?t know if it was a good alternative but I decided to pick up the separate files during the process of the SF Diagnostic Tool one by one and then compress and send them to you in a zip-file. I hope this will work as well and gives a hint of what it is that causes my BSOD.

(I have noticed that BSOD in 90% of the time occurs when I start a render process with Lightwave 3D 9.6 and that it most of the time happens after 20-25 frames. The other times BSOD appears hasn?t got any special connection to any software process that I am aware of.)

Regards, Jack

A:When BSOD and SF Diagnostic Tool doesn´t match!

Welcome.
It appears that you have overclock'd your CPU
Code:
CPUID: "Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz"
MaxSpeed: 3600
CurrentSpeed: 4549
Please remove any overclock / over-volting applied to the system.
If the problem persists I'll be happy to help .

9 more replies
Answer Match 71.82%

Hi all ..

I just built my own pc 2 weeks ago.Everything is new :

OS Windows 7 Ultimate 32
CPU AMD x6 1090t
Motherboard ASUS M4A89GTD PRO
Memory BALASTIX 4 GB ddr3 1333mhz
Graphics Card onboard HD 4290
Sound Card onboard
Monitor(s) Displays DEll
PSU 650W
Hard Drives seagate 500gb

I have to say that i only encountered BSOD only when I run the ASUS diagnostic tool which initially whenever I run it i got this error (included two here)


signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 1000007f
BCP1: 00000008
BCP2: 8E7A5750
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\103110-18860-01.dmp
C:\Users\scorp\AppData\Local\Temp\WER-36161-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 1000007f
BCP1: 00000008
BCP2: 8E76F750
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that he... Read more

A:BSOD New system +ASus Diagnostic tool

  
Quote: Originally Posted by scorpion100


Hi all ..

I just built my own pc 2 weeks ago.Everything is new :

AMD x6 1090t ,Asus motherboard,memory balistix 4gb ddr3 ,650 PSU ,and seagate hard disk...

I have to say that i only encountered BSOD only when I run the ASUS diagnostic tool which initially whenever I run it i got this errorincluded two here)

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 1000007f
BCP1: 00000008
BCP2: 8E7A5750
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\103110-18860-01.dmp
C:\Users\scorp\AppData\Local\Temp\WER-36161-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 1000007f
BCP1: 00000008
BCP2: 8E76F750
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\103110-32463-01.dmp
C:\Users... Read more

4 more replies
Answer Match 71.82%

Hi

My Toshiba C660D has been suffering from BSOD. So I re-installed the OS, but after a week or so it is doing it again. It was slow booting/closing and then the Black Screen. I have installed a different HDD and the OS again and it is currently working, but I had another BSOD earlier today and it is slow to reboot. I have also changed the memory. Can anyone please help?

Many thanks in advance.

Rik

A:BSOD - SF Diagnostic Tool Info is attached.

Woooops! Here's the SF Tool report

9 more replies
Answer Match 70.98%

I'm getting an error during startup causing automatic restart. The error occurs shortly after I sign on. The error I'm getting is:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0xfffff80000000240, 0x0000000000000002, 0x0000000000000000, 0xfffff800036860fa). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 082512-33150-01.

Can any one tell me what this is and how to fix it?

Attached is the SF Diagnostics.

Thank you,
Robert Ludwig
Attachment 228243

A:BSOD bugcheck 0x0000000a on Startup Causes Automatic Restart

Welcome Robert,
You have given us several reports, most were inconclusive, one however gives this as the cause.

Mfefirek.sys file descriptionProductname:SYSCORE Description:McAfee Core Firewall Engine Driver Company:McAfee, Inc. File size:Various

This is the action that you should take to prevent further BSODs,
Make a system restore point, so that we can restore everything if necessary.
Uninstall your anti virus and replace with Microsoft Security Essentials and for a weekly scan Malwarebytes.
If you continue to get BSODs, we will start with a driver verifier, test.
Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click ... Read more

1 more replies
Answer Match 70.98%

While working through the BSOD Posting Instructions, I am finding Option 1 - Step 2's download of the SF Diagnostic Tool is halted by my AVG software as Adware is suspected. How do you suggest I proceed so I can upload the needed file regarding my Kernel Security Check Failure?

A:SF Diagnostic Tool in BSOD Posting Instructions - Adware?

Disable your antivirus, then download the SFDiagnostic tool

5 more replies
Answer Match 70.98%

this is the problem..upload the diagnostic

A:Problem with BSOD after screensaver, diagnostic tool uploaded

Activation

Reports indicate a possible issue with the windows installation. Please post this report before we begin:Windows Genuine and Activation Issue Posting Instructions

4 more replies
Answer Match 70.14%

I have bought a new PC for my wife without OS. It is an Acer N2120G supplied only with FreeDOS on the HD. I have installed Win 7 Pro via a USB flash drive, using the Windows DVD/USB tool from the install DVD without any great difficulty.
Everything works but once she started using it she got crashes about once a day. I tried it myself and get the same problem. At present there isn't anything elaborate installed. Mainly it will be used for browsing and emails and a few of the built in card games. Having installed Win 7 Pro sp1 32bit, I wiped the FreeDOS partition so that is now unallocated empty space.

She had to stop using it so I could check it all. I got advice from the Win 7 Forum Windows Memory Diagnostic Tool stops at 88% complete so I started with simple checks like PW and SFC and they looked fine. I went back to the AMD website and their auto detect told me that I had all the up to date drivers.
Just to be safe, I updated all the drivers from the AMD automatic system. I was especially cautious about the graphics card as I know that can be very sensitive! But the crashes still occurred - maybe after 6 hours - maybe after 6 minutes

I set the PC to run the Memory Diagnostic from Administrative Tools. Just the standard shutdown and run option. it froze at 88% complete. After some hours I gave up and after a reboot, tried again - same freeze but at 21%. Then I tried the memtest86 having downloaded it for recording to a CD. That showed that the memory was OK in all respe... Read more

A:BSOD Windows Memory Diagnostic Tool stops at 88% complete

Please make sure your computer is set for Small Memory Dumps Dump Files - Configure Windows to Create on BSOD Then make sure there is a folder in C:/Windows named Minidump. If not, create one.

Also, check your Windows Updates and make sure there are no recommended or important updates left to run and in the left column look at view update history and see how many have failed.

When you ran memtest did you run this one for 8 complete passes?
Please Run Memtest86+



   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each ... Read more

9 more replies
Answer Match 69.3%

Hello Sevens Forum I have a BSOD in my windows 7 ultimate here post my SF Report. I dont know what could be the problem. Can you Help me? Thz!!!

A:Report .rar witch SF Diagnostic Tool file BSOD Windows 7 Ultimate x86

Please follow -






  
Quote: Originally Posted by writhziden


There seems to be a problem with your Windows installation. Please follow the Windows Genuine and Activation Issue Posting Instructions. Post the results in your next post; do not start a new thread.

5 more replies
Answer Match 68.88%

My new(Built in November) computer has had issues with stability since the first week it was built. At first the offending application was the mom.exe Catalyst Control Center monitoring app, but it has since been removed and I am still getting blue screens. I have attached a zip file that I created with the tool from this site. Any help tracking down the specific issue would be greatly appreciated.

A:Random BSOD, bugcheck.

Hello Rob,

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

8 more replies
Answer Match 68.88%

Hello. I build a custom PC a month ago. From the beggining I recieve random BSOD with 5-6 codes.

Windows 7 Ultimate 64bit SP1
Intel Core i5-4440
Asus H81M-K
4GB DDR3 1600MHz
Toshiba 500GB 7200/32MB
Fortron 450W

A:Random BSOD Bugcheck 24

Just had another one with error f4. Here is the updated bugcheck.

1 more replies
Answer Match 68.88%

Hi There!

I have a i7 4770K with an Asus z87-Pro Motherboard, 3 x SSD in RAID 0 and 16GB Memory. GTX970 Video Card. I am having random BSOD's which have been persisting over quite some time.

I run 8.1 Pro x64 and the problems have persisted through an OS reload.

it usually happens when I am not home and when the computer should be "idle"

Any assistance greatly appreciated.

A:Random BSOD's BugCheck 124 - HAL.DLL

Update drivers in red and run Prime95 SmallFFT test. Hardware - Stress Test With Prime95 - Windows 7 Help Forums How do you cool it?

Code:
000.fcl Fri Sep 26 15:11:22 2008 (48DCDF7A)
CyberLink FCL Driver
http://www.carrona.org/drivers/driver.php?id=000.fcl

LGPBTDD.sys Wed Jul 1 20:47:52 2009 (4A4BAF58)
Logitech GamePanel Software
http://www.carrona.org/drivers/driver.php?id=LGPBTDD.sys

LGVirHid.sys Tue Nov 24 02:36:48 2009 (4B0B38B0)
Logitech Gamepanel Virtual HID Device Driver
http://www.carrona.org/drivers/driver.php?id=LGVirHid.sys

LGBusEnum.sys Tue Nov 24 02:36:48 2009 (4B0B38B0)
Logitech Keyboard
http://www.carrona.org/drivers/driver.php?id=LGBusEnum.sys

AsUpIO.sys Tue Aug 3 04:47:59 2010 (4C57835F)
ASUS hardware monitoring software related
http://www.carrona.org/drivers/driver.php?id=AsUpIO.sys

NTIOLib_X64.sys Wed Oct 20 08:45:49 2010 (4CBE901D)
MSI Afterburner driver (known BSOD issues with Windows) Also found to be a part of MSI Live Update 5[br][br]Recently (Nov 2014) there have been numerous instances of this driver in memory dumps. Analysis reveals that they are scattered throughout the filesystem by the installed MSI command utilities. For now I suggest uninstalling them all.
http://www.carrona.org/drivers/driver.php?id=NTIOLib_X64.sys

ASUSFILTER.sys Tue Sep 20 17:46:33 2011 (4E78B559)
ASUS USB Hub filter driver
http://www.carrona.org/drivers/driver.php?id=ASUSFILTER.sys

GEARAspiWDM.sys Thu May 3 21:56:17 2012 (4FA2E... Read more

3 more replies
Answer Match 68.46%

Hello!

I'm getting random BSOD's on my HP DV6-2090eo Laptop. At most times there is no "real" bluescreen appearing. Instead the computer just freeze and then go black, and I've to shut it down manually. But sometimes there is a real bluescreen appearing and it says "an attempt to reset the display driver and recover from a timeout failed" and some other times the "Video TDR error" message has appeared. I've learned that this is a bugcheck 0x116" BSOD and I've read about solutions such as updating Video Driver, check the temperature, updating other drivers and so on. I've tried several video drivers, updated other outdated drivers and nothing works. I don't think its a heatrelated problem as I sometimes get BSOD about 1 min after start up.
Actually I have had freezes like this in periods from about six months after I bought the computer until now(bought it at the end of nov 2009). The first time I solved it by updating BIOS, but know I can't find any new update.
Other "BSOD periods" I've solved by updating video driver and reseting windows to the original "store-mode" so to say :P

Now any solution I can come up with doesn't work and I don't wanna reinstall windows again just for another two months of being BSOD free!

Anyone got any tips, I really need some help!

Minidumpfile attached.

A:BSOD Bugcheck 0x116 Win7 x64 DV6 2090eo random BSOD's

  
Quote: Originally Posted by MrRevolver


Hello!

I'm getting random BSOD's on my HP DV6-2090eo Laptop. At most times there is no "real" bluescreen appearing. Instead the computer just freeze and then go black, and I've to shut it down manually. But sometimes there is a real bluescreen appearing and it says "an attempt to reset the display driver and recover from a timeout failed" and some other times the "Video TDR error" message has appeared. I've learned that this is a bugcheck 0x116" BSOD and I've read about solutions such as updating Video Driver, check the temperature, updating other drivers and so on. I've tried several video drivers, updated other outdated drivers and nothing works. I don't think its a heatrelated problem as I sometimes get BSOD about 1 min after start up.
Actually I have had freezes like this in periods from about six months after I bought the computer until now(bought it at the end of nov 2009). The first time I solved it by updating BIOS, but know I can't find any new update.
Other "BSOD periods" I've solved by updating video driver and reseting windows to the original "store-mode" so to say :P

Now any solution I can come up with doesn't work and I don't wanna reinstall windows again just for another two months of being BSOD free!

Anyone got any tips, I really need some help!

Minidumpfile attached.


Its the directx driver, video card, power, or heat.... Read more

2 more replies
Answer Match 68.04%

Windows 7 Enterprise x64. Functions as my PVR running Media Center connecting to an HDHomeRun serving up content via PLEX.

Has been running fine in my basement for over a year. Started with the BSOD lately.

Google search for Bugcheck 0x00000109 turns up a ton of "try this...try that". Any help would be greatly appreciated.

Bugcheck info attached per instructions.

A:BSOD random Bugcheck 0x00000109

Let me know if there is any additional information needed to help try and resolve this issue.

Thanks - Mike

2 more replies
Answer Match 68.04%

Hi, I get a random BSOD every now and then mainly after a PC reset and after i have put in the windows credentials. I have tried to follow the tutorial on analysing BSOD but am coming up stumped on a probable cause. The bugcheck error code is BugCheck F4, {3, fffffa8004e8db10, fffffa8004e8ddf0, fffff800035ca780}.

Attached is the output from the dm log collector.

Thank-you!

Sergio

More replies
Answer Match 68.04%

This has become really annoying. It was very infrequent at first, but I had to reinstall Windows 7 (64-bit) when BSOD with this error started appearing right after the system had booted. For about a day or a two there were no BSODs, but it has started happening again.

Please help.
Here's the analysis of the dump file on WinDbg:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff8a00a766000, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80002f98079, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002f0a0e0
GetUlongFromAddress: unable to read from fffff80002f0a198
fffff8a00a766000 Paged pool

F... Read more

A:Random BSOD Page_Fault_In_Nonpaged_Area BugCheck 50

No tutorial came through.

3 more replies
Answer Match 67.2%

I have new pc, and it will give me random BSOD everyday atleast twice

Attachment 269543

A:BSOD Random Bugcheck code: 0xC5

The problem is as appearing, with the relatek network driver.

Code:
ad3fb4c0 8d90a572Unable to load image \SystemRoot\system32\DRIVERS\Rt86win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt86win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt86win7.sys
Rt86win7+0x2572
And it is very old.

Code:
8d908000 8d981000 Rt86win7 T (no symbols)
Loaded symbol image file: Rt86win7.sys
Image path: \SystemRoot\system32\DRIVERS\Rt86win7.sys
Image name: Rt86win7.sys
Timestamp: Wed Nov 23 20:29:11 2011 (4ECD0A3F)
CheckSum: 0007F9B1
ImageSize: 00079000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from http://www.realtek.com/downloads/dow...&GetDown=false. Take the Win7 and WinServer 2008 R2 Auto Installation Program (SID:1581786), dated 2013/5/22.

For more precise info, upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.

5 more replies
Answer Match 67.2%

Thanks for taking the time to help. I'm new to the forum so I'm hoping you guys can assist me. I just recently put together my first build, and so far it's been running well. However, I've been getting [seemingly] random BSOD's (four so far) and I'm not exactly sure what's causing the problem. My build is:

Intel i7 4790k
Gigabyte z97-gaming 3
2x Corsair XMS3 8GB (16GB in total)
Crucial MX100 256GB SSD
EVGA GTX550 ti

I ran Intel's cpu diagnostic tool and everything checked out. I then ran chkdsk /f on my SSD and that checked out as well. I also ran memtest86 on my RAM and it went through 4 passes and no errors. I attached screenshots of the results (sorry for poor quality).

I pulled the four BSOD .dmp files and read through them, but I can't make much out of the results. I've attached a .rar of the files for review.

Like I said, the BSOD's are seemingly pretty random. One happened when I was just starting the system up after it had been sleeping, another happened when opening chrome, another when playing Skyrim, and the other just saving a file from my USB drive.

Let me know your thoughts on the above info; any help is truly appreciated. After investing so much in this new build, it's driving me crazy that there's something like BSOD's happening to it already.

Thanks!
Jeff

A:Random BSOD on brand-new build, Bugcheck 1A

Any thoughts on what can be causing the problem?

9 more replies
Answer Match 67.2%

Hi there,

Even since I build this new computer last year in September I am plagued by irregular bluescreens,
but was able to solve them, as I though, by replacing the RAM after memtest86 deemed 2 sticks faulty (I bought the RAM 2nd-hand, how stupid of me)

So here I was with brand new RAM, happily computing away but still getting some blue screens from time to time,
so I re-installed Windows in February to bail out faulty drivers or something and it seems to be fine again, but no, the BSOD kept comming.

So I replaced the PSU since I thought it might be load-related issue and my 500W PSU was getting old anyway,
maybe it wasn't able to deliver the load reliable anymore. Now I have a shiny new 650W RS650GM from CoolerMaster, but to no avail.

I've attached the SF diagnostics tool file collection to this post in the hopes someone might circle down the cause.
The last days, I really got many bluescreens. During gaming, during browsing or just when the PC was idle and should have switched to standby after a while instead of restarting from a BSOD...

The latest BSOD had a bugcheck of 0x124_GenuineIntel_PROCESSOR_CACHE, I googled that and *suspect* my CPU might be the cause of all this. But before I start a RMA with Intel I want to be sure. Maybe I can try to elevate/reduce the issue by underclocking or something?

Everything in my PC runs on stock clocks, no overclocking at all. Running the RAM on JEDEC 1333 MHz @ 1.5V or XMP 1866 MHz @ 1.65V does not change the BSOD rate.

Thank... Read more

A:Win 8.1 BSOD at random occasions with Bugcheck 0x124

The 3 latest dumpfiles are Bugcheck 124 and 133 all mention HAL.dll. This points to a hardware related problem. analysing the dumpfiles i suspect it is audiorelated. I have a hunch it is your incompatible audo hardware/drivers from Creative.
What devices are you using from Creative?
Please update to windows 8.1 compatible drivers or if these are not avaliable uninstall/remove these devices.
Driver Update Site: Creative Worldwide Support
Also please update your Cisco Vpn device , the driver is from 2008 and 2011
Driver Description: Citrix Deterministic Network Enhancer Miniport or Cisco Systems VPN ClientDriver Update Site: http://www.cisco.com

3 more replies
Answer Match 67.2%

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000018 (0x0000000000000000, 0xfffffa80079b2b60, 0x0000000000000002, 0xc500000000000002). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 031212-33649-01.


Any help will be appreciated.

I followed all the steps for anyone to help me.

Thanks, Austin.

A:Random BSOD: The computer has rebooted from a bugcheck.

One was corrupt and the other points to your AVG.
I note you have AVG.
AVG can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST

Download tools and utilities | AVG Worldwide

Microsoft Security Essentials - Free Antivirus for Windows
* Did you run a FULL SYSTEM scan with Malwarebytes?[/B]

3 more replies
Answer Match 67.2%

Hi, im having trouble finding out what's causing this PC to crash from time to time.
The poblems started a few weeks ago when i upgraded the CPU and the GPU. The vendors of the components and the motherboard stayed the same.
(E6550 --> E8500 and HD4850 --> HD6850)
It had some crashes before but now it got realy bad so i reinstalled the system, updated MB bios, dowloaded drivers from vendor sites, updated everything and only installed basic 3rd party drivers and software.

The crashes still remained...they happen more often when the computer is under heavy load (3D operations, games running), but they also occur if im playing a video or just use a web browser.
I ran memtest, chkdisk but nothing, then furmark and intelliburn but no effect.
The remaining drivers came up clean with verifier, and i looked after anything that came up from the crashdumps but my windbg knowledge is limited so im at the end of my rope here and open to any suggestions.
Thanks in advance.

Windows 7 Enterprise 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110622-1506)
Gigabyte GA-P35-DS3 rev. 2.1 (bios version: F14)
Intel E8500 (E0)
ASUS Radeon HD6850
4x1GB Geil RAM @(5-5-5-18) (2 different sets of 2x1gb same default timings 4-4-4-12)
Western Digital 2TB (WD20EARS) - 1 partition
Western Digital 640GB (WD6400AAKS) - 2 partition (100GB system partition)

A:Win7 x64 Random BSOD's, different bugcheck codes

These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you... Read more

9 more replies
Answer Match 67.2%

Good day,

Been having a lot of BSOD even after a clean install of Windows 10. I think I'm either missing some critical drivers somehow or I have faulty hardware. I'll continue to run my own checks, I'm an IT professional, but I definitely need help here.
EDIT: Discovered one of the 4GB sticks of RAM was faulty. Removed it and will continue to monitor for BSOD.

A:Random BSOD with Bugcheck IDs - Hardware Issue?

Keep us posted

0 more replies
Answer Match 67.2%

Hello,

I actually looked around using the BlueScreenView tool and I'm not getting a whole lot except that ntoskrnl.exe is crashing in certain memory locations. I'm not sure if it's a memory error or possibly something else. I'd like to get a second opinion before I potentially have to take down my media server for several hours using memtest.

I've attached all the requested logs. Anyone see anything I missed?

A:Random BSOD - DRIVER_IRQL_NOT_LESS_OR_EQUAL + bugcheck 0x000000d1

Hello webhead and welcome to the forum,

Have you checked for BIOS updates.

Code:
BIOS Version/Date Phoenix Technologies, LTD ASUS P5N32-E SLI ACPI BIOS Revision 1404, 2/25/2008
Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Please uninstall AVAST for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Check for heating issues using Speccy or HWmonitor

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

ASACPI.sys Mon Mar 28 08:30:36 2005 (42476C4C)
Asus ATK0110 ACPI Utility (a known BSOD maker in Win7 and Win8). Also a part of many Asus utilities (Win8 versions available from Windows Update as an Optional Update - but check Asus first!)
Driver Reference Table - ASACPI.sys

nvm62x64.sys Sat Oct 18 03:01:06 2008 (48F8FD12)
nVidia Ethernet Networking Driver (nFo... Read more

1 more replies
Answer Match 66.78%

Hi

Random BSOD stump all my diagnostic attempts (Junior IT Support Assistant)

Fujitsu Q900
Windows 7 professional 32bit
Intel Core i5 2.50Ghz

Memory diagnostic came back with nothing

Tried a new cloaned HDD, same problems re-occured

Running AVG 2012 Professional

I have attached the minidump folder (hopefully)

Thanks

A:Random BSOD, The bugcheck was: 0x0000001a (0x00041790, 0xc0802776, 0x0

Difficult situation, no doubt.

► Scan the system for possible virus infection.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
► Use Microsoft Security Essentials.
Uninstall AVG
Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download and install those, and then run full system scans with both of them, one by one.

If nothing changed there, enable Driver Verifier.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

1 more replies
Answer Match 66.78%

As the title suggests, my BSODs seem to be random. They come while typing email, writing a word document, or doing nothing. I cannot associate it with any particular activity, software, action, button-click, etc. No recent software changes that I know of. I think that I have all of my drivers up to date.

Windows_NT6_BSOD_jcgriff2.zip attached.

System Info:
Windows 7 Home Premium, x64, SP1
- This is the original OS installed, OEM (self-built system)
- Approximately 1 year old

Here is some information extracted from WhoCrashed:windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: GenuineIntel Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz Intel586, level: 6
2 logical processors, active mask: 3
RAM: 4285980672 total
VM: 2147352576, free: 1940242432Sample WhoCrashed report (all are nearly identical - only the last three parameters in the 0x9F code change):On Mon 8/29/2011 6:04:00 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\082911-31839-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x9F (0x3, 0xFFFFFA8004CC1060, 0xFFFFF80004028518, 0xFFFFFA8003921820)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
Th... Read more

A:Frequent & Random BSOD, Bugcheck code: 0x9F (0x3...)

  
Quote: Originally Posted by ivorykid


As the title suggests, my BSODs seem to be random. They come while typing email, writing a word document, or doing nothing. I cannot associate it with any particular activity, software, action, button-click, etc. No recent software changes that I know of. I think that I have all of my drivers up to date.

Windows_NT6_BSOD_jcgriff2.zip attached.

System Info:
Windows 7 Home Premium, x64, SP1
- This is the original OS installed, OEM (self-built system)
- Approximately 1 year old

Here is some information extracted from WhoCrashed:windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: GenuineIntel Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz Intel586, level: 6
2 logical processors, active mask: 3
RAM: 4285980672 total
VM: 2147352576, free: 1940242432Sample WhoCrashed report (all are nearly identical - only the last three parameters in the 0x9F code change):On Mon 8/29/2011 6:04:00 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\082911-31839-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x9F (0x3, 0xFFFFFA8004CC1060, 0xFFFFF80004028518, 0xFFFFFA8003921820)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the drive... Read more

4 more replies
Answer Match 66.78%

Hi everybody, this is my first post here and I don't know a whole lot this kind of stuff just as an FYI. Anyways, 2 months ago I had a customized rig put together by a computer shop and it was fine up until about a week ago. At first it started stuttering at random times, everything would get really choppy, sometimes the audio would completely cut out and the only thing I could do was using the mouse (nothing I clicked on would respond). A quick restart would fix it but lately the computer has been crashing about once a day. The last 2 crashes have happened when it was not even in use (I usually leave the computer on 24/7, so I would come back and my computer would either be completely shut off or at the log in screen for windows). I have run different diagnostic tools but I don't know how to interpret any of it. Ive attached the SF debug tool in hopes someone here could help me.

Computer specs:
Intel i5-4670K 3.4GHz
8GB ram
Windows 7 64 bit

If you need any other info from me please let me know. Thanks.

A:Random BSOD Bugcheck code: 0xA0 (0x1, 0x6, 0xFFFFFA800835ACF0, 0x0)

Hi unally.

The issue is: The system has failed to allocate a necessary power IRP.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

INTERNAL_POWER_ERROR (a0)
The power policy manager experienced a fatal error.
Arguments:
Arg1: 0000000000000001, Error Handling power IRP.
Arg2: 0000000000000006, The system has failed to allocate a necessary power irp.
Arg3: fffffa800844bcf0, target device object
Arg4: 0000000000000000, system power irp
Some results I am obtaining from the dump that I am not aware of. Like .....

Code:
IoStatus.Status = 00002044: The preset referral limit was exceeded.
Still, if it is a desktop computer (it seems to be, from the original post), disable hibernate.

If still the situation is the same, change the mouse.

Code:
[ 78,cc] 73 b fffff880044d4338 fffff880044d428c fffff880044d4200-fffff880044d417c pending
fffff880044d4338: is not a device object
mouclass!MouseClassSetWmiDataBlock
If it is still the same, get the PSU replaced.

Let us know the results.
__________________________________________________________________________________________

Code:
*******... Read more

3 more replies
Answer Match 66.78%

Been getting infrequent BSOD errors on my Windows 10 PC (Home edition).

I had a look on BlueScreenView, seems like a lot of the bugcheck BSOD is ntoskrnl related but I can't work out if it's hardware related or some bad driver somewhere.
The computer is 9 months old, custom built gaming PC.Temperatures are low <60C at load, <30C at idle (waterblock cooling on CPU)System is stable when gaming, a lot of the BSOD is happening at idle. (I leave my PC running all the time)The OS was upgraded from Windows 8.1 to Windows 10 in late 2015.System felt more stable under Windows 8.1, not really experienced many BSOD under Win8.1I have tested the memory with 10 successful passes (12 hrs).Have run DirectX diagnostics and cyclic Heaven/Valley benchmarks - no crash.

A:Random BSOD (Windows 10) ntoskrnl/0x00000124 bugcheck

Sorry, zip file attached with the diagnostics from DM Log Collector

UNSC-CORTANA-Thu_04_28_2016_180201_69.zip

2 more replies
Answer Match 66.78%

My system has BSOD twice today, used to do it many time a day before i re-installed windows. I have no idea what causes it and would really like to know. Most recent WhoCrashed said "This was probably caused by the following module: ntoskrnl.exe (nt+0x75B90)" and the other says "This was probably caused by the following module: nvlddmkm.sys (nvlddmkm+0xCBB40)" which is related to nvida drivers but i have most recent one installed. If some genius could help it would be appreciated but if you cant, thats ok.

A:BSOD in games and random, Bugcheck code: 0x1E (0x0, 0x0, 0x0, 0x0)

Hello and welcome to Sevenforums!

The problem is caused by your graphics driver. Run Display Driver Uninstaller(DDU)
Make sure you tick the Uninstall C:/AMD and C:/NIVIDA folders while you are in DDU when you are done running DDU install your graphics driver again and you should be good to go! This is the guide for DDU: Drivers - Clean Left over Files after Uninstalling

Update DirectX.

Run sfc /scannow and chkdsk /r.
Install the latest updates from Windows Update.

Do the exact same steps for chkdsk /r but instead of typing in sfc /scannow type chkdsk /r.

SFC /SCANNOW Command - System File Checker

9 more replies
Answer Match 66.78%

Hi there, first time posting. I'm having an issue with my laptop, Asus U50F. Keep getting random BSOD, thought it was a windows problem so I reinstalled windows 7 pro on a fresh SSD. Used memtest86+ to check ram and all tests ran fine. Not sure where to look for problems.

I've attached my SF logs, please help!

Thanks in advance

A:Random BSOD on Asus Laptop, The bugcheck was: 0x00000050

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff80022c478a0, 1, fffff80002ada976, 2}


Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt!PoIdle+497 )

Followup: MachineOwner
---------
Run a minimum of 8 consecutive passes, preferably overnight, or until errors occur using MemTest86+. Please provide a photo showing results.

Reference:
RAM - Test with Memtest86+

9 more replies
Answer Match 66.78%

Hey folks,

I'm the victim of at least one daily BSOD crash over the past few weeks. I'm the office guiney pig testing the first 64bit machine introduced onto the network...

I can't seem to identify what single occurance is causing the crashes, as they seem to be triggered by anything from typing and email, to very large graphics in photoshop, to just waking the pc from sleep.

I've attempted to update ever hardware driver I can find on the machine - to no avail. In an effort to remedy the scenario I have recently updated to Win7 pro - 64bt - SP1, and have also recently upgraded the graphics card from the onboard intel hd to an AMD Firepro v3900.

From WhoCrashed and Windbg the offending party appears to be either ntkrnlmp.exe or ntoskrnl.exe, but not sure where to go from here with that information.

Any help greatly appreciated - SF Diagnostics attached...

A:Random BSOD's - Bugcheck code: 0xA - Error: IRQL_NOT_LESS_OR_EQUAL

Hi scottagecheese.

The zip contains a stray crash dump only, and it does not contain much more information about the crash.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If it does not show any errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you mad... Read more

5 more replies
Answer Match 65.94%

Haven't actaully seen this computer BSOD for me, but the customer has told me has done so. I have checked the event viewer and seen logs of the computer has unexpectedly shutdown. No information there to say why. I ran a Surface scan on the Hard Drive to check for bad sectors, none was found. HD Sentinel says HD is 100% healthly. I also ran HotCPU benchmark software to put the computer under heavy load to see what fails. No errors found. So I've come here. I've attached a SF Diagnostic Scan log.

A:Random BSOD, attached SF Diagnostic Scan Log

AVG is contributing to your BSOD's. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

ASACPI.sys Mon Mar 28 08:30:36 2005 (42476C4C)
Asus ATK0110 ACPI Utility (a known BSOD maker in Win7 and Win8). Also a part of many Asus utilities (Win8 versions available from Windows Update as an Optional Update - but check Asus first!)
Driver Reference Table - ASACPI.sys

wdcsam64.sys Wed Apr 16 14:39:08 2008 (4805BB2C)
Western Digital SCSI Arcitecture Model (SAM) WDM driver [br] 2008 driver version has known BSOD issues in Windows
Driver Reference Table - wdcsam64.sys

nvm62x64.sys Sat Oct 18 03:01:06 2008 (48F8FD12)
nVidia Ethernet Networking Driver (nForce chipset driver)
Driver Reference Table - nvm62x64.sys

lv302a64.sys Fri May 1 04:41:07 2009 (49FA2903)
Logitech Camera driver
Driver Reference Table - lv302a64.sys

lvrs64.sys Fri May 1 04:43:25 2009 (49FA298D)
Logitech Camera driver
Driver Reference Tabl... Read more

2 more replies
Answer Match 65.94%

Hi - I don't have much to say at this time. It's a random blue screen that forces a restart and I haven't detected any pattern to it yet.

A:Random BSOD Win 7x64 sf diagnostic uploaded

Welcome

BSoD Analyze:


Code:
0: kd> !irp fffffa8003ee0d30
Irp is active with 7 stacks 5 is current (= 0xfffffa8003ee0f20)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa8006001050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\RTL8192su.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for RTL8192su.sys
*** ERROR: Module load completed but symbols could not be loaded for RTL8192su.sys
\Driver\RTL8192su
Args: 00016600 00000000 00000006 00000005
[ 16, 2] 0 e1 fffffa8006016820 00000000 fffff80003320f70-fffffa80048f66a0 Success Error Cancel pending
\Driver\vwifibus nt!PopSystemIrpCompletion
Args: 00016600 00000000 00000006 00000005
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa80048f66a0

Args: 00000000 00000000 00000000 00000000
You need to update latest/reinstall drivers for your Realtek RTL8192SU Wireless LAN 802.11n USB 2.0 Network Adapter Driver

Driver Reference Table

Realtek

Let us ... Read more

1 more replies
Answer Match 65.94%

Just now my computer just randomly got the BSOD. Its a pavilion dv7-2165dx. running Windows 7 home edition. Service Pack 1 64-bit OS .
below are my attached files.

A:Random BSOD watching a video, The bugcheck code: 0x00000124

Hi Bigbelly

Lets test your RAM



   Note
You will need a USB Flash Drive
RAM - Test with Memtest86+

3 more replies
Answer Match 65.94%

I have been getting random BSOD only in a particular account.

The BSOD is very random. In the other account I have tried running Driver verifier however I could not see any crashes.

Here is a short report on the bugcheck

This was probably caused by the following module: ntoskrnl.exe (nt+0x7EFC0)
Bugcheck code: 0xF4 (0x3, 0xFFFFFA800BEA6730, 0xFFFFFA800BEA6A10, 0xFFFFF80003181460)
Error: CRITICAL_OBJECT_TERMINATION
file path: C:\Windows\system32\ntoskrnl.exe

Thanks in advance.

A:Random BSOD occuring only in a particular account. Bugcheck code: 0xF4

Code:
BugCheck F4, {3, fffffa800bea6730, fffffa800bea6a10, fffff80003181460}

----- ETW minidump data unavailable-----
Probably caused by : wininit.exe
Remove:


Code:
Start Menu\Programs\DAEMON Tools Pro
Start Menu\Programs\TuneUp Utilities 2011
Daemon Tools is known to cause BSODs with Windows, and it is advisable you remove this program. Furhtermore, programs such as TuneUp Utilities do not improve the performance of Windows 7, and can cause crashes and problems with your system.

A recommended alternative for Daemon Tools is:MagicISO
You can also use some of Windows built-in features, which Daemon Tools provided, such as burning .ISO files to a CD/DVD.

Follow these steps -

Memory:RAM - Test with Memtest86+
Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Scan for any corrupted or missing protected Windows files:SFC /SCANNOW Command - System File Checker

9 more replies
Answer Match 65.94%

Hey all and thanks for your help. My friend just bought this laptop and im trying to help him out. The bsod has happened twice in the last few days and from what i can tell it is a driver maybe trying to be loaded twice..? Or maybe a iscsi initiator problem possibly?

Here is my dm log collector file and thanks again!

A:Bsod at random times.. bugcheck code 19, bad pool header

Dont know if this helps but the BSOD did happen while downloading a windows update the second time.. He just bought this pc used on 6-11 (it does have its serial key sticker) I have run sfc/ scannow and windows memory diagnostics on it with no errors. I dont see any sign of malwarebytes ever being on this pc.

And here is a WhoCrashed 5.51 scan.

7 more replies
Answer Match 65.1%

I am getting BSOD multiple times a day. Error on BSOD: Worker thread returned at bad irql

I had installed Windows updates, Western Digital My passport Software and Samsung Kies Software. After this the BSOD started happening multiples times a day. I am unable to do a System restore to correct the problem. Have uninstalled the WD and Samsung softwares, but no respite.

One specific instance noticed is that launch of utorrent results in quick BSOD, else it happens randomly. I would like to completely eliminate this problem. Would appreciate any and all help. Dump files attached as instructed.

Windows Reliability report says:
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000e1 (0xfffff800033d8560, 0x0000000000000002, 0xfffffa80080cf120, 0xfffffa80080cf120). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 110612-29328-01.

I am running Win 7, HP 64 bit on a Sony Vaio Laptop. Never had this problem over the last 1 year that I have owned this Laptop.

A:BSOD Random event, multiple times, Bugcheck reboot 0x000000e1

Welcome aboard, brucealvice.

What I am noticing that you have two antivirus programs installed. Dont do it at all. Let Microsoft Security Essential stay there, uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

From your crash dumps...

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck E1, {fffff8000338e560, 2, fffffa8006c64090, fffffa8006c64090}

Probably caused by : ntkrnlmp.exe ( nt!IopProcessWorkItem+0 )

Followup: MachineOwner
---------
According to Carrona.org, STOP 0x000000E1: WORKER_THREAD_RETURNED_AT_BAD_IRQL
Usual causes: Device driver

Update these two drivers:
Atheros NIC driver from ATHEROS drivers for Microsoft Windows (Atheros?????)
Atheros network adapter driver from ATHEROS drivers for Microsoft Windows (Atheros?????)
As your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers. If after unininstalling McAfee and updating these coup... Read more

1 more replies
Answer Match 63.42%

We've been getting a BSOD on one of our computers on startup recently. The exact message the BSOD gives varies but often mentions atapi.sys. Having done extensive research we've come to the conclusion that it could be a rootkit or it could be the fact that we have Daemon Tools installed on the computer. The problem is, when the BSODs first started (entirely at random - we'd done no updates and changed nothing, except perhaps to install a game or two, not sure), repeatedly trying to start the computer would eventually make it start (after 4 or 5 attempts) and it would be fine after that, but they've gotten worse and no matter how many times we tried, we've been unable to make it start, safe-mode or otherwise. If only we could get the thing to start up, we could run heaps of rootkit scans.

We'd really rather not do a format and full reinstall, so we're looking for solutions that can be done by hand.

So far, we've tried renaming atapi.sys and copying a fresh (hopefully clean) version from a different computer via Recovery Environment's cmd prompt, but the BSODs still occur. We've tried Startup Repair, but it gives this message:


Code:
Root cause found:

Unknown Bugcheck: Bugcheck 3d. Parameters = 0xfffff88002ffb020, 0x0, 0x0, 0xfffff88000e012b8.

Repair action: System files integrity check and repair
Result: Failed. Error code = 0x490
We have no USB keys plugged in when doing the Startup Repair.

Specs:

Windows 7 Home Premium x64
Intel Core 2 Quad (can't remember the e... Read more

A:BSOD on start, Startup Repair: Unknown Bugcheck: Bugcheck 3d

Additional information is required.

1. Download this .BAT file to your desktop

2. Right-click the .BAT file and then click 'Run as Administrator'
3. Locate the .ZIP file created on your desktop, and upload it here in your next reply.

9 more replies
Answer Match 63.42%

I have 2 pc's bought from the same supplier but a year apart, they are both running windows 7 pro however they have just started randonly rebooting and giving me a BSOD and the only issue i can see are 3 of the same event logs saying the pc rebooted after
a bugcheck and it saved it to c:\windows\memory.dmp however i am having trouble viewing this file?
I eventually managed to install the Windows debugging tools but not having much luck with viewing the file to see what the problm is?
Can anyone assist further please with moving forward to try and find the cause and resolve
thanks

A:unable to resolve random reboot BSOD & event id error messages kernel power & bugcheck

 
We do need the actual log files (called a DMP files) as they contain the only record of the sequence of events leading up to the crash, what drivers
were loaded, and what was responsible.  




Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask



Wanikiya and Dyami--Team Zigzag

2 more replies
Answer Match 60.06%

Hello
My laptop is a Dv7-3165dx running Windows 7 home edition. Service Pack 1 64-bit OS . when i start up my computer, everything is fine it loads up i sign in and the desktop loads up with no problem.

i've had a problem where my laptop would not respond when closing the lid, shutting down, restarting, hibernating.. but not so much when i did hibernate it so i have been doing this for the past year. it would turn to a blank screen after it says shutting down or any of the other ones and it will stay on, the fan will turn into high gear(speed up) and the laptop would get really hot after this. i would have to press the power button to turn it off.

Sometimes while im just doing some easy task like on chrome, the laptop will stop responding, not even the task manager will come on, i would be stuck on a blank screen when i press CTRL ALT DELETE and then a message couple moments later " Failure to display security and shut down options" so i would have to power off, and start it back up fresh.

It was only yesterday that after when it was not responding that i tried to restart it, logged off, was shutting down, it took about like 5 minutes of hanging before i got the blue screen DRIVER_POWER_STATE_FAILURE. I looked into it and on Bluescreenview were athrx.sys+b280b ntoskrnl.exe+e96c2 in red. i updated my drivers and i shut down couple times with no problems then when i went to shut down later on i got another blue screen but this time its only ntoskrnl.exe+e96c2. ... Read more

A:BSOD: random and error "The bugcheck code: 0x0000009f"

Welcome

Dump shows that athrx.sys is still the cause.


Code:
0: kd> !irp fffffa8006901a70
Irp is active with 4 stacks 2 is current (= 0xfffffa8006901b88)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa8003dce050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\athrx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
\Driver\athr
Args: 00015500 00000000 00000005 00000003
[ 16, 2] 0 e1 fffffa8004b29710 00000000 fffff80003327200-fffffa800387c9f0 Success Error Cancel pending
\Driver\vwifibus nt!PopSystemIrpCompletion
Args: 00015500 00000000 00000005 00000003
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800387c9f0

Args: 00000000 00000000 00000000 00000000
Upgrading drivers for pre-existing device Open Windows Device Manager.
- Click on the start
- Type Device Management on the search bar
- Hit enter
In the Device Manager locate the device you wish to update the drivers for/look for a
Right-click the device and click Properties.
In the Properties window click the Driver tab.
Click the Update Driver button.
In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard ... Read more

9 more replies
Answer Match 60.06%

Hi,

This is my first post in this forum, actually i found that this is the most helpful forum all over the net,

Anyway I need a little help solving this BSOD issue please,

My PC is crashing randomly when I'm away and getting BSOD, with the following errors,

I tried to run "Disk Defragmenter", "Disk Scan" and "sfc /scannow" with no results,

My Hard Drive is an SSD with the capacity of 60GB and I have four Additional hard drives each two create a "RAID 1", I'm getting the BSOD randomly and with out running any application, I tried to update all Intel drivers in my machine and "Jmicron Raid" as well with no hope ,

and here is "Who crashed" Log:

====================================================================
System Information (local)
--------------------------------------------------------------------------------

computer name: USER-
windows version: Windows XP x64 Service Pack 2, 5.2, build: 3790
windows dir: C:\WINDOWS
CPU: GenuineIntel Intel(R) Core(TM) i7 CPU 975 @ 3.33GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 12875243520 total
VM: 2147352576, free: 2000760832

--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\WINDOWS\Minidump

Crash dumps are enabled on your computer.
On Tue 3/26/2013 7:08:01 PM GMT your computer crash... Read more

A:BSOD Win XP 64 Bit Random Crashing "Multi Bugcheck Codes"

Hi talas9 welcome to SevenForums

Try to update your SSD firmware .



   Tip
You do NOT want to Defrag an SSD drive . No need to.


   Tip
I'd personally upgrade to Windows 7 . So you could really get the speed of the SSD drive

9 more replies
Answer Match 59.64%

all drivers updated
memtest - no errors
hdd test - no errors

but still getting this error and blue screen:

Event[802]:
Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2012-09-18T18:17:14.000
Event ID: 1001
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Daiva-PC
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000024 (0x00000000001904fb, 0xfffff88002d913f8, 0xfffff88002d90c50, 0xfffff88001312232). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 091812-20950-01.

could some one help me find problem or give some hints?

A:BSOD random and error saying "The bugcheck was: 0x00000024"

Welcome

STOP 0x00000024: NTFS_FILE_SYSTEM BSOD Index

Usual causes: Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag programs, Disk/Drive failing/failure

Problematic software:

Code:
Start Menu\Programs\ESET Public:Start Menu\Programs\ESET Public
DAEMON Tools Lite "c:\program files (x86)\daemon tools lite\dtlite.exe" -autorun Daiva-PC\Daiva HKU\S-1-5-21-1530937395-1627669387-252134136-1000\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Please uninstall Daemon Tools, its a known cause for BSoDs.
Also uninstall Eset Antivirus, it has contribution to BSoDs to some extent.

After uninstalling the programs above, run the system file checker and let it repair any damaged windows files.
SFC /SCANNOW Command - System File Checker

Your bug check indicates hard drive failure.

To make sure your hard drive is good run:
Disk Check

Run the short and long tests with SeaTools:

SeaTools for Windows
SeaTools for DOS

Also check for an update on your BIOS version.

Code:
BIOS Version/Date Phoenix Technologies, LTD ASUS P5N73-AM ACPI BIOS Revision 0602, 2009.08.10
Post back results when done.

9 more replies
Answer Match 59.22%

anyone know of any 64 bit diagnostic tools that equals the usability of HiJackThis?
thx

A:64 bit diagnostic tool?

Perhaps something like this?http://www.bestfreewaredownload.com/freewa...e-xqtmycya.html

4 more replies
Answer Match 59.22%

What is the best tool to test your harddrive , cpu , memory etc...etc... and I mean THE BEST! Which one is used by most PC Repair places?

Thanks,
Mancow
 

A:PC Diagnostic Tool

Eurosoft PC-Check with all the accompanying equipment.
 

2 more replies
Answer Match 59.22%

Good Evening Folks:

As per the instructions contained in the SF Diagnostic Tool, please find attached the results of the scan. Please note the Minidump scan reported that there was no file.

Regards
Powell Lucas

A:SF Diagnostic Tool

Hello Powell and welcome!

- I'm not quite following here, are you getting any BSOD? If so, be sure to enable minidumps by doing this:








  
Quote: Originally Posted by "Carrona


Go to Start and type in "sysdm.cpl" (without the quotes) and press Enter
Click on the Advanced tab
Click on the Startup and Recovery Settings button
Ensure that "Automatically restart" is unchecked
Under the Write Debugging Information header select "Small memory dump (64 kB)" in the dropdown box
Ensure that the Small Dump Directory is listed as "%systemroot%\Minidump" (without the quotes)
Click OK twice to exit the dialogs, then reboot for the changes to take effect.


Thank you for your attention.
Fred.

3 more replies
Answer Match 59.22%

are there existing ram diagnostic tools that i can download that will check for any problems with ram instead of having to swap out one stick at a time to check for bad ram?
 

A:Looking for a ram diagnostic tool

Memtest86+ and MemTest are two excellent programs that will do this.
 

4 more replies
Answer Match 59.22%

When I execute version 2.0 of the Microsoft's WMI Diagnostic Tool on my 64-bit Home Premium system, I get an 'Unsupported OS version or build #' error. Am I doing something wrong? If the tool doesn't work on 64-bit, is there a similar tool available which will? Thanks!

A:WMI Diagnostic Tool for 64-Bit

After reviewing the script, it is obvious that this tool does not support any version of Windows 7 at all (Vista is the last supported OS). Nothing else available at MS download center. No hits on Google. Looks like MS left Windows 7 users out in the cold when it comes to WMI diagnostics...

1 more replies
Answer Match 59.22%

I am looking for some kind of combined hardware/software diagnostic tool that can tell me what is causing my computer to crash. It crashes about once every 2 days, and freezes while I use it for periods of typically around 30 seconds each, in which the program stops responding.

I want to know if it's a hardware problem and I need a new computer or if it's a software problem and I need to un-install a few things

A:Diagnostic tool

Hello and welcome to TSF, JJFlame!

PLEASE, if you're going to post - post more information about both your hardware and your operating system, as it's very important.

Also, it would really help to tell us important events such; When do you get this error? When did it start? What programs are you running at the time? What program stops responding?

Go to this link and post the output files as attachments in your next post(s), Thank you.

19 more replies
Answer Match 59.22%

Does anyone know of a free software that will do diagnostics check on my HD? Please let me know.

thanks
 

A:HDD diagnostic tool

do you know the make ?
most manufactures have software on their site
 

3 more replies
Answer Match 59.22%

What is the best pc diagnostic tool out there? eg. bootable, finds hardware specs out, just an all around great diag. tool...
 

A:PC Diagnostic tool

7 more replies
Answer Match 58.8%

installed a new motherboard, new cpu, new ram, new hdd, a different graphics card, found errors on a cd drive, disabled that, and my computer still restarts randomly, like before i decided to get new hardware. automatic restart is turned off. what can i do?

mobo: mis p43-c51 (new)
tried both gf 7950gt and 8800, no difference, still problems
seagate 250 gb hdd (new)
intel q8300 2.5ghz (new)
x fi extreme gamer soundcard
ocz 600w psu
4 gigs of ocz ram pc3-8500 1066mhz (new)
latest drivers. new sata cables. temperatures ok.

please help. this is getting... quite annoying to say the least, almost replacing all hardware and still problems. thank you very much in advance.
 

A:random restart and random bsod

16 more replies
Answer Match 58.8%

I'm resurrecting WDT for Win 10, it's been quite useful at Eightforums - but Win 10, especially with digital entitlement, has different needs.

I uploaded a beta at github for those that would like to test and give feedback in terms of what is required etc. The thing at EF was I was one of few interpreting the diagnostic report, so making the report itself more user friendly is one of the main things we need to sort out.
The current report is almost verbatim what Windows' licensingdiag.exe utility produces.

NB Office is phase 2 so that will not be a priority right now.

Releases ˇ Superfly-Inc/Windows-Diagnostic-Tool ˇ GitHub

PS It also needs a new name.

NB: It may hang on first use - if so close and restart... it's a known bug.

More replies
Answer Match 58.8%

I have a Logitech MX300 with wireless 3 button mouse.
The left, right and scroll wheel work fine, the center button doesn't seem to work at all.
I have the latest version of SetPoint and tried setting it up with different key mappings but to no avail.
I'm not even sure if it's working.

Is there any diagnostic tool that will show me when I push a button that it's being activated?

I first tried to get it to work in WOW(World of Warcraft) but no luck. I then realized it doesn't even seem to work outside the game. I mapped the button to be an 'X' and opened a text file. Pressing the button resulted in no action, no X's.

I'm running Win7 64bit.

Any ideas or info about a tool?

Thanks!

A:Is there a Mouse Diagnostic tool?

I have found that when one button stops working, it usually means that the mouse has gone bad. I think that Logitech warranty is 5 years, and when I sent them a message about a mouse limping like yours, then sent me a new one, without even returning the old one.

9 more replies
Answer Match 58.8%

I've been getting the BSOD for almost a month now. It's just at startup which usually leads to a couple restarts and then everything works perfectly fine. Sometimes my .exe's don't work, sometimes my USB ports aren't recognized, and sometimes it just flatout freezes. But again, after a couple restarts everything goes back to normal. Anyway, I'm trying this tool and hopefully it works!

Here's my event info:

- System

- Provider

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

EventID 41

Version 2

Level 1

Task 63

Opcode 0

Keywords 0x8000000000000002

- TimeCreated

[ SystemTime] 2013-09-28T18:43:45.507608800Z

EventRecordID 853163

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer Fuzz-PC

- Security

[ UserID] S-1-5-18


- EventData

BugcheckCode 26
BugcheckParameter1 0x41790
BugcheckParameter2 0xfffffa8004b98040
BugcheckParameter3 0xffff
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0

A:SF Diagnostic Tool attempt

We have got a hint that you faced a stop 0x109 on 08/08/2013. No hint of any stop 0x26 as you stated.

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

5 more replies
Answer Match 58.8%

my windows media play wont work it just freezes and i cant close it down,i cant play games i get a curser surrounded buy a black screen.

i run the dirextX diagnostic tool and get the following messages.

Dx Diag has detected their may have been a problem accessing the system information the last time this program was used. would u like to bypass the system information this time.
yes / no

i revieve the same messages for direct sound and direct music.
whats going on. can anyone help me please
 

A:directX Diagnostic tool

16 more replies
Answer Match 58.8%

Hello everyone.. Ran across this link

http://oca.microsoft.com/en/windiag.asp

in another (GASP, CHOKE) forum and thought I'd post it here for review/ comments.

I used the download file to create a boot floppy which runs the diagnostic. You also have the option of burning it to a CD.

One advantage I see over other memory diagnostics I've used, is this one runs it's test sequence (a set of 8) continuously until you stop it. This allows one to run a repeateitive test sequence over an extended period of time (like over night) and have a better chance of detecting an intermittent fault.

Check it out
 

A:New Memory Diagnostic Tool

8 more replies
Answer Match 58.8%

I just purchased a GeForce graphics card with 128mb. I installed the new
driver but under DirectX Diagnostic tool under ?display? it says aprox total
memory n/a and under the ?main driver? it says tsirchnl.dll this is not the
driver I installed and it should say 128mb on total memory.

But under device manager it has the correct driver and shows the correct
memory.

I looked for DirectX under uninstall program but couldn?t find it. I thought
if I uninstalled it then reinstalled it would show the correct information.

Is this a problem with DirectX? Does anyone have an idea?

Please help

Francine
 

More replies
Answer Match 58.8%

I have a Samsung SV 320 3n HD in my 2003 HP Pavilion a320n windows xp desktop and according to an old Samsung web page I found that the HD diagnostic scanner to use for this HD should be HUTIL. I have tried both the iso version on a CD and the .exe version on a floppy and I couldn't get either to run. They both get to the first screen and don't go further. All the Samsung computer stuff has been bought out by Seagate and there is no support for this old drive or even a download for HUTIL on the Seagate website.. Can someone recommend a HD diagnostic scanner that might run on my old machine? Right now, I can't get it to boot in normal or safe, can't do system restore, or go bsck to last known good config, but I can boot with standalone virus scanners and have run several different ones without finding anything serious. I really just now, want to find a HD diagnostic tool I can run and get a report of some kind on the condition of the HD
Thanks

A:need hdd diagnostic tool for Samsung SV 120 3n HD

hi ,i found this download at majorgeeks .com just click on one of the download selection links http://www.majorgeeks.com/Samsung_Drive_Diagnostic_Utility_Hutil_d5769.html

3 more replies
Answer Match 58.8%

OK I have windows vista and every time I try to run the memory diagnostic tool it always freezez at 8% overall and 16% on the first half of the test I run it on a restart and the next time I start up my computer any ideas why and it says no error detected as of yet
 

A:memory diagnostic tool

I don't know unless the CPU is overheating -- but try creating a Windows independent diagnostic using Memtest.

Beginners Guides: Diagnosing Bad Memory
Memtest86 - A Stand-alone Memory Diagnostic

>> And why are you testing the memory -- are you getting any BSODs or freezes otherwise?
 

1 more replies
Answer Match 58.8%

Hi,
I ran the Windows XP diagnostics tool and got an error message saying there is no diagnostic utility found...
what does this mean ?

A:Ran Dell Diagnostic Tool

Hello,If it is one thing that I have noticed from working on Dell computers, it is that most of them use the tools provided by Dell a little differently from model to model. Especially if your PC is a few years old. You may need to insert one of the disks that came with your PC, if you have one that is a couple of years old. The newer Dell's don't come with any of the disks unless you beg them, and pay $10.Most of the newer Dell's that have the diagnostics onboard, are generally accessed like this.1. Turn on (or restart) your computer.2. When the DELL? logo appears, press F12 immediately.3. When the boot device list appears, highlight Boot to Utility Partition and press Enter.4. When the Dell Diagnostics Main Menu appears, select the test you want to run.Hope this helps,nos

4 more replies
Answer Match 58.8%

I've experienced some strange events on my computer and I thought the first thing I'd do is run some disk diagnositc tools. I have five physical disks:
C: system/program disk
D: backup of C
E: data disk
F: backup of E
G: Spare disk ... using as 2nd backup of C

Since C & D are Western Digital devices, I downloaded one of their LifeGuard Diagnostics: DLGDIAG for Windows, and ran the "Extended Test" against C, D, and G. All passed. The control panel says that SMART status is not available -- I forgot how to turn that on (as far as I know, it should work with all five drives).

Any hints on a more demanding disk test that would not wipe the disk clean ... I do not want to have to reinstall my software because of the test. For what it is worth, I'm using Acronis True Image to make image copies of C to D and G.

Suggestions appreciated!

A:Need Disk Diagnostic Tool

The disk manufacturer's tests are, in my opinion, the right ones to use.

4 more replies
Answer Match 58.8%

does win 7's memory diagnostic tool always takes a long time from 21% to 22% on extended run? standard, short tests finish quickly i can run 2/3 tests in no time at all

A:memory diagnostic tool

it does on mine , i thought originally it had hung on me but it eventually moved on it does it everytime so im assuming that particular test takes a while

5 more replies
Answer Match 58.8%

mmm

I've posted something that i've learned about this tool and i hope for a better solution cause my webcam has not working properly as usual. Please help me

Thank you

A:diagnostic tool solution

Please explain this:

Code:
127.0.0.1 genuine.microsoft.com
127.0.0.1 mpa.one.microsoft.com
127.0.0.1 sls.microsoft.com

1 more replies
Answer Match 58.8%

Hi. I have had my PC perfectly running since 2010. I have played all kind of video games with no problem with my GXT 580. Recently I hired and installer to add more ram to my PC and a SSD drive. He tried for a lot of time to install the additional ram and did some stuff on the bios with no avail. He then told me that he was going to leave the PC at that (with the original ram) and installed the SSD. Everything was great and I have been using my PC for almost 6 months without problems. The problems started last week when I decided to play again some video games. Whenever I was playing games (Planet Side 2 or GTAIV) then the infamous BSOD appeared. I think that if I never played any video games (since the new installation) I would have never experience the BSOD. I highly suspect of something the installer did. Please, please help me!! Thank you so very much!!!

A:Please, please help! SF Diagnostic Tool uploaded

Update your BIOS.

Code:
Versi?n y fecha de BIOS Award Software International, Inc. FB, 24/08/2010
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Update your Samsung SSD's Firmware.

Update XBox USB wireless controllerdriver (must) from Software Downloads | Microsoft Hardware

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Let us know it the problem persists or not.

3 more replies
Answer Match 58.8%

Running Win.XP Home version 2002 Service Pack 2
Have lost Diagnostic tool Hot fix (KB914440 )
When trying to re-install I get following message

(Failed to Migrate Dependent Packages Win Xp)
Running Rogers H.S. Internet Connection
Internet Explorer V. 6.0
Outlook Express

AMD Athlon (TM )XP 2400+ 1.49GHz
512 MB of RAM.
Any advice appreciated.
Cheers:
 

More replies
Answer Match 58.8%

When I type "dxdiag" in the run box in the start menu, the tool loads half way and then a notice appears saying that DirectX has to close. When I go back to run DXDT again I get a message when it is in the middle of loading asking me if I want to bypass DirectShow, and that there was an issue with DirectShow last time I loaded DXDT. Does anyone know why this is happening, what it means, or how to fix it? Any helpful response would be appreciated greatly.

Specifications:

-Windows Vista Home Premium (never used to have this problem with XP)

-Nvidia 8800GTX - Driver Date = 3/2/2007 Driver Version = 7.15.11.141
 

A:DirectX Diagnostic Tool..

Also, I am not sure if this problem is causing or at all related to the Steam games issue I am currently having when I start my Steam games and the main menu goes black...
 

6 more replies
Answer Match 58.8%

Hello guys, can you help me please I need to know what this test do and what its mean:
WINVC
WMATS+
MATS+
Stride6
LRAND
INVC
Thanks.
PS: Sorry for my bad english. :)

More replies
Answer Match 58.8%

Can a software firewall be used a diagnostic tool in check the security of a system ?
 

A:Can a firewall be used as a Diagnostic Tool ?

Not really that I know of but what are you trying to find out

the only think it can do if set correctly is warn you of anything attempting to go on the net

it won't tell you if it's good or bad just that it is connecting
 

2 more replies
Answer Match 58.8%

Hey, does anyone know of any free system diagnostic tools that would help me find out if something on my computer isn't cooperating with another?
 

A:System Diagnostic Tool

8 more replies
Answer Match 58.8%

In trying to diagnose a pesky problem with my computer I ran across a handy little tool from windows that checks your RAM modules for errors. You can find it at:

http://oca.microsoft.com/en/windiag.asp

Hope it helps.
 

A:Windows RAM Diagnostic tool

theres another here
http://www.memtest86.com/
 

1 more replies
Answer Match 58.8%

Been using my Dell Inspiron E1705 laptop lately and I've been getting random bsod's followed by an immediate restart.

Other than factory hardware the only thing I changed was the wireless card, but that was about 6 months ago and I haven't had the problem until recently. THe laptop is about 1.5 years old.

Dual Core 1.7 GHZ
1 gig of ram
nVidia 7900 GT graphics card

If you need any more info lemme know

Thanks!

Almost forgot, this is the error signature I get once windows starts up again.

BCCode : 10000050 BCP1 : FEFEFEF8 BCP2 : 00000000 BCP3 : 8054B51A
BCP4 : 00000000 OSVer : 5_1_2600 SP : 3_0 Product : 256_1
 

A:Random BSOD and restart

7 more replies
Answer Match 58.8%

Hello,

I have a self-built system which has been running perfectly for two months. Today I had a random restart - the screen flickered black and then the PC restarted. A few minutes later when using the PC again, I got a BSOD. Hopefully somebody could take a loot at the dump for me and work out what caused it.

(Not sure if this is related, but a couple of days ago my secondary screen went black - I can drag things there and obviously Windows thinks it's there, but it's just black - have tried switching the cables, leaving if off for a while etc.)

Thanks.

A:Random restart and BSOD

  
Quote: Originally Posted by vagary


Hello,

I have a self-built system which has been running perfectly for two months. Today I had a random restart - the screen flickered black and then the PC restarted. A few minutes later when using the PC again, I got a BSOD. Hopefully somebody could take a loot at the dump for me and work out what caused it.

(Not sure if this is related, but a couple of days ago my secondary screen went black - I can drag things there and obviously Windows thinks it's there, but it's just black - have tried switching the cables, leaving if off for a while etc.)

Thanks.



You have at least 5 different causes for these crashes. Your video driver, hardware, win 7, etc.

When you have this many differetn casues I must start thinking about hardware first. Use these instructions to find out what it means and what to try. http://www.sevenforums.com/crash-loc...-what-try.html.

When you exhaust those I would re-install your video driver, and run a system file check to verify and repair your system files.
to do that type cmd in search>right click and run as admin>sfc /scannow (note the space between sfc and "/")

Let us know the results so we can finish the repairs

Ken

Code:
020710-21687-01.dmp 2/7/2010 3:18:02 PM SYSTEM_THREAD_EXCEPTION_NOT_HANDLED 0x1000007e ffffffff`c0000005 fffff800`02ac022b fffff880`03139908 fffff880`03139160 ntoskrnl.exe ntoskrnl.exe+6622b ... Read more

1 more replies
Answer Match 58.8%

Hi,

My system has been running fine for a good year until yestarday. I was on the internet at the time and just browsing sites then all a sudden the display went black and a BSOD appeared to which the system then restarted itself. When Windows 7 booted back up I had a message telling me the computer had recovered from an unexpected shutdown with some information tagged to it. I dont have that information although I have used a program to create some files which I have added below.
Also I scanned my hard drive for trojans and found one infection which I deleted. The problem still persisted so I have formatted my hd and done a clean install of Windows.
After the clean install it`s still happening. Since yestarday the PC has randomly restarted itself about five times. Any info on this would be super. Thanks.

A:Random BSOD then restart

There were no .dmp files ... navigate to c:/windows/minidump and zip up any .dmp files and attach them to your next post...

2 more replies
Answer Match 58.8%

hi guys
well i have installed this wonderful OS few days ago and it's fantastic
but i have had some bsod that kept restarting my computer
by the way it's 32bit version

here is the minidump, i couldn't tell anything from checking it, especially when it says my symbols are not correct

please help, thanks

A:random bsod and then restart

I notice you are using an old mouse driver from 2005 copperhd.sys

Try uninstalling (or update) your mouse driver and reboot. I think that the default mouse driver will be enough to use your mouse.

8 more replies
Answer Match 58.8%

Hi Guys i searched everywhere on the forum and net but no answer to my problem. imFrustrated

Well everytime my computer restart with no BSOD. i have installed Blue Screen View bbut nothing comes up. here's a log on the event Viewer. Any help would be highy appreciated.

IM DESPERATE i play dota and each time i get ban koz i could not connect in time.

Error message in log : The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.





Quote:
- System
- Provider
[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID 41
Version 2
Level 1
Task 63
Opcode 0
Keywords 0x8000000000000002
- TimeCreated
[ SystemTime] 2014-02-21T09:18:54.600826500Z
EventRecordID 761174
Correlation
- Execution
[ ProcessID] 4
[ ThreadID] 8
Channel System
Computer DarkmindeD-PC
- Security
[ UserID] S-1-5-18
- EventData
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0


Pleaseeeeeeee help me identify the cause. Btw im using a UPS cause i thought i had random poower cuts.

A:Random Restart - no BSOD

Hello DarkMindeD,

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

1 more replies
Answer Match 58.8%

Hi! Nice to meet you all!

For a few days I've experiencing random restart and every time after it restart, I got some BSOD and sometimes it freeze. Once after it restart, it freeze with this words on screen:

Intel (r) 82945G chipset
Family PCI accelerated
SVGA BIOS

Build Number 1295 PC 14. 2
02/17/2006 17.49.39

Decompilation or Disassembly PROHIBITED

Copyright (c) 2000-2003 int corp

and once it goes to CMOS Checksum Bad error message, but mostly I got BSODs. Too bad most time my wife that experiencing the BSOD and she forgot to write them down, but I got two:

STOP: 0x00000024 (0x001902FE, 0x000000FF, 0x00000000, 0x804E1F95)
Beginning dump of physical memory
Dumping physical memory hardisk : (some numbers counting up)

and the other one is:
STOP: 0x0000000A (0x04172EE7, 0xA64EB518, 0xA64EB214 0x74A094A)
atapi.sys
address F74A094A
Base at F749A000
date stamp 41107b4d

I have tried:
- Change the Power Supply
- Changing the Memory
- Change the video card

But I still having the same problem.

Can somebody here help me?

Thanks in advance.
 

A:BSOD & Random restart

10 more replies
Answer Match 58.8%

I'm afraid I'm in need of a bit of help. I would greatly appreciate it.

To save some time, I have recently installed an ASUS sound card so I can only assume that's the culprit. The BSOD started after installing the driver. When the driver install finished it was supposed to restart my computer but it didn't so I was left to restart it manually. So, I'm guessing it's either a bad install or a bad driver.

This is the sound card:
Xonar DGX - Sound Cards and Digital-to-Analog Converters - ASUS

Using the SF diag too I have also attached the dump files. (unless I've done something wrong)

I originally installed from the CD but also went to the link above to install the latest online drivers.

Thank you.

A:BSOD random restart

Yes, leland07.

It is that ASUS Xonar DGX Audio Device (driver: Driver c:\windows\system32\drivers\cmudaxp.sys) that is causing the issue here.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff8802c62bff0, 2, 0, fffff880050cb570}

*** WARNING: Unable to verify timestamp for cmudaxp.sys
*** ERROR: Module load completed but symbols could not be loaded for cmudaxp.sys
Probably caused by : cmudaxp.sys ( cmudaxp+28570 )

Followup: MachineOwner
---------
And the installed driver is the latest one available.

Code:
fffff880`050a3000 fffff880`053d1000 cmudaxp T (no symbols)
Loaded symbol image file: cmudaxp.sys
Image path: \SystemRoot\system32\drivers\cmudaxp.sys
Image name: cmudaxp.sys
Timestamp: Thu Apr 11 16:15:54 2013 (51669462)
CheckSum: 002A485F
ImageSize: 0032E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
So in this situation we cannot associate the issue with the driver. Though you may uninstall the driver and try the earlier version; before ruling the c... Read more

3 more replies
Answer Match 58.8%

Hi all,


I encounter BSOD errors randomly. Not sure what is wrong with the system. Need your help. Thanks.


Attached is one of them. Please advise me on what is wrong and the solutions. Thanks again.

A:BSOD and random restart .... Help

Hi all,

I encounter a lot of problem with my computer. Could anyone help ??
I forget to place my system config on. Here it goes ...


Interl Core 2 Duo E6550 2.33Ghz
GA-N650SLI-DS4
Corsair CM2X1024-6400 2GB
Creative X-Fi XtremeGamer
MSI Dvd rom
BENQ DW 1640


What is wrong with the system ? I bought it for less than a year... THanks for all ur help in advance

8 more replies
Answer Match 57.96%

Hello,

Ive been floating around these forums for a while but have never really posted until today. After building my new system, I have been experiencing random BSOD during odd moments. Sometimes, my PC will be idle while other times, I will be playing graphic heavy games when it will freeze, and I get a the BSOD. I've ran memtest+ and have not found any errors (i ran both sticks in at the same time, just found out I should do one at a time). About my system:

Win 7 64 bit
Intel i5 2500k
8-gig ram
gtx 480 1.5gig video card
ASRock Z77 Pro4 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard

Here is the included .zip file as well

Thank you all!

A:Random BSOD "bugcheck"

Welcome

Software concerns:


Code:
Start Menu\Programs\Check Point\ZoneAlarm Public:Start Menu\Programs\Check Point\ZoneAlarm Public
Zone Alarm is known cause to BSoDs. Please uninstall it.

I and many members on our forum recommend Microsoft security essentials with
a great combination of Malware Byes.

Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - The Free version
Good and Free system security combination.

Run a full scan with both (separately) once downloaded, installed and updated.

You need to get all updates from windows updates including Service Pack 1

Code:
Version 6.1.7600 Build 7600





Quote:
STOP 0x0000007A: KERNEL_DATA_INPAGE_ERROR

Usual causes: Memory, Paging file corruption, File system, Hard drive, Cabling, Virus infection, Improperly seated cards, BIOS, Bad motherboard, Missing Service Pack







Quote:
STOP 0x0000007F: UNEXPECTED_KERNEL_MODE_TRAP

Usual causes: Memory corruption, Hardware (memory in particular), Overclocking failure, Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack







Quote:
STOP 0x000000F4: CRITICAL_OBJECT_TERMINATION

Usual causes: ---------


Additional Sug... Read more

2 more replies
Answer Match 57.96%

I can perform a Standard test without any difficulty. However, when I tried to attempt an Extended test the process halted at about 10% of even the
first test. After about a quarter of an hour it was still at this point so I pressed Esc to cancel the test.
How long would this Extended test normally take ? Was I a little premature in stopping it ?

A:Windows Memory Diagnostic tool.

Your throughest testing would be memtest86.

Its a boot cd thats run startup and let run.
Memtest86+ - Advanced Memory Diagnostic Tool

Remeber its an iso that needs to be properly burnt.

5 more replies
Answer Match 57.96%

Hello,

I recently purchased a Dell Studio 1747 laptop. However, it had numerous issues. I managed to get enough replacement parts for it to finally be fixed, however, I would like to test one of my old memory sticks in Windows 7 Memory Diagnostics to see which one is defective. I had 4 GB of RAM. Surely, both couldn't be, right? I think only one of them was defective. I want to test to see which stick it could be, simple enough, right?

Even simpler question. In the Windows 7 Memory Diagnostic Tool, what is the max amount of RAM it can scan? In Vista/XP it was 4 GB. Is it the same for the Windows 7 version? I am running a 64-bit OS. If not, shall I just remove one of the existing (good) sticks of RAM and replace it with the questionable one and run the test?

I've already ran the test on my new, freshly replaced RAM, which came back all-clear, so, I know any new errors should be attributed to the extra RAM I put in.

Thanks,

Necifix (Or TWISTEDBroly, this SN is old)

A:Windows 7 Memory Diagnostic Tool

Hi -

I would suggest running memtest86+ one stick at a time; alternate the slots

Memtest86+ --> http://www.memtest.org/#downiso

Burn ISO to VD with Imgburn --> http://www.imgburn.com/index.php?act=download

Regards. . .

jcgriff2

.

4 more replies
Answer Match 57.96%

http://google.com/safebrowsing/diagnostic?site=(just add the link here--ex:forums.techguy.com)
 

More replies
Answer Match 57.96%

I have a problem here. I am using Windows 7RC. Was having no probs with anything, just exploring this OS. I started windows memory diagnostic tool control panal. Now I cant get out of it. There is no response to esc=exit. Reboot=memory diagnostic tool. Try to boot in safe mode, it takes me straight to memory diagnostic tool. Tried to boot into the bios, it took me to memory diagnostic tool. Finally I uninstalled the two sticks of Kingston KVR800D2N5/1G, then reinstalled them hoping that would change things. Booted up, it went to memory diagnostic tool....I have no idea what is causing this. Any help would be appreciated here.
Oh, I use an Asus P5B-E motherboard.
 

A:memory diagnostic tool problem

7 more replies
Answer Match 57.96%

I was running the PC Diagnostic Tool and I got the error in 'Network' and flagged as FAIL.

I do not know how to fix or diagnose the issue.

Is this with the Network driver?

Thanks

A:PC Diagnostic Tool says - Network fail

What?s the problem exactly?
Is there a particular reason to use the PC Diagnostic Tool?
Do you have any problems with LAN or WLAn?

1 more replies
Answer Match 57.96%

i got a friends laptop im trying to work on, its got no markings on it besides "Notebook" written on top the screen... i cant figure out who the manufacturer is and i gotta get some drivers for it, i cant more then 16 bit color mode and i cant get online so if anyone knows a good diagnostic tool for this please leme know, thanks...
 

A:diagnostic tool to check PC info

Hi see if any of these help.
WinAudit
http://www.pxserver.com/WinAudit.htm
Belarc.
http://www.belarc.com/free_download.html
Everest.
http://www.majorgeeks.com/download4181.html
 

3 more replies
Answer Match 57.96%

I have a Dell xps l502x with Windows 10. I had restored my computer and saved some files on my backup in the other partition. I tried to find the other partition and changed my startup Hard drive through command prompt. The computer reboot and started in the Dell Diagnostics. Now it wont let me exit and go back to windows. I try to exit and it will restart right back to diagnostics. I tried F12 (it wont give me the option for F8) and it doesnt give me the option to reset. I am stuck and i dont know what to do. Can someone help me get back to windows.

More replies
Answer Match 57.96%

I ran the extended test overnight and this morning it had rebooted into Vista. The problem is that there are no results in the toolbar to be viewed as the tutorial said it should be. Where can I view the results of the memory test?

A:Memory Diagnostic Tool Problem

Which memory test, which tool, and which tutorial? I'm presuming that you're using the built in memory tester - and it should've given you a notice if it passed the test or if it found any problems. If you didn't get a message, then I'd suspect that the test terminated abnormally - so you'll have to run the test and see if you can get a message from it (or see when it terminates). This'll involve a lot of boring, staring at the screen - but I've found not evidence of a log file or results page that will be displayed.Here's a link to the BC tutorial on the memory test: http://www.bleepingcomputer.com/tutorials/using-vista-windows-memory-diagnostics-tool/

3 more replies
Answer Match 57.96%

Hello,

I have been downloading just about every diagnostic tool that I could find on Cnet, however none of them produce an error report that I can see so far. All the tools tell me what I have on my system, but what I want is a thorough analysis tool that will tell me what is wrong with my system. Does such a thing exist?

The problem I have is that my systems works ok, on a very basic level, like for tv streaming, internet and MS office. But not for anything that requires any degree of advanced graphics, even with old simple games.

I have no idea what is wrong and it is annoying because I cannot use my Steam account anymore!

Also, the fan on the graphics card goes nuts when do anything that requires it to work....

Any advice welcome!

Thanks
 

A:diagnostic tool + error reporting

16 more replies