Tech Problem Aggregator

4th install. Progressive increase of BSOD over time

Q: 4th install. Progressive increase of BSOD over time

Well, I wish I could remember everything I had just written in this box, but it's gone now.

I had a stand alone video editor built. (See specs ) The first operation BSOD'd in about 4 hours, but didn't do it for quite some time after that. Then it started dropping the video, then it started crashing IE on opening, then it started crashing the editing programs. I searched this and other forums and eventually replaced the EVGA GT 650. That corrected the video drop and even the crashes for a while. Then the crashes began in earnest, escalating until the BSOD's joined in the fray. Since windows does not have the program needed to read their own dump files, and all other attempts at correcting failed, I did a "repair install" from the disk. That worked for a while, but the issue progressed in much the same manner as before. I finally did a reformat, which performed nearly identical to the initial operation, with a 4 hour onset of a BSOD, and then nothing. That is until the programs started crashing and the BSOD's appeared again. I then had the guru wipe the drive completely and reformat. The only difference in performance has been that it didn't blue screen after 4 hours. It did however crash IE on start-up, as well as the editing program.

At no time has this machine ever run fast. I have an XP Home machine next to it that would run circles around it in terms of video editing, both machines running Corel Video Studio ProX4. I have since upgraded to ProX6, which is a 64 bit program, but it runs even slower than the Prox4 did. It doesn't crash as often but a 1.5 second latency is outright annoying.

I have searched the threads here for hours trying to find a similar problem. I found recommendations for removing Pinnacle, "alcohol", ASUS Gamer, using scannow and some others, all of which I have tried to no avail. As to scannow, yes it was in the root, but it can't get past 80% of the initial scan. In safe mode, however, it goes 100% and finds no issues.

Many thanks to the Cap'n for the SF Diag program. I still don't know what I'm doing, but at least I have something that gathers info that a real person can look at!

Speaking of not knowing anything, I found it odd to find this string:
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
That "amd64" in there may not be what I think, but this machine runs an Intel i5.

With best regards and hopeful anticipation,

Jeff

A: 4th install. Progressive increase of BSOD over time

Hello and welcome Jeff mate that build thing looks suspect to me but I am no expert. I did see in the msinfo that you have two problem devices one is that the printer is disabled and the other is a missing driver.

I think this might be worth asking in the Windows installation and activation section as there are a few who are real quick with seeing anything wrong with the activation and that build like I said looks wrong at least I have never seen anything like that before.

9 more replies
Answer Match 86.94%

For the last few weeks I have been getting BSOD: IRQL not less or equal, and system service exception. I first updated all drivers/windows ect, and ran recommended repair utilities. After this had no effect, I had been directed by another source to test the RAM, and so ran memtest, finding no errors. I have also swapped out different combinations of my 4 Dimms of RAM to try and isolate the problem. While I have been swapping out my RAM sticks, I happened to notice that my physical memory usage would slowly and steadily rise until ~ 95-99% at which point the BSOD would occur. Since noticing the RAM usage continually rising seemed to cause the crash, I have found that rebooting when the memory usage gets too high will baseline the RAM usage and can prevent the BSOD.

Does anyone have any idea what might be causing this? The only programs I'm using are world of warcraft, chrome, and occasionally skype or MS office. BSOD have occured with some or even none of these applications open(But always with memory usage @ ~ 90% or higher). Closing every program when the memory gets high doesn't cause the memory usage to ever stop rising(though it will temporarily drop the usage).

So in a nutshell:

My memory usage goes from ~20% on fresh boot, gradually increasing until ~95-98% and I Crash. I've scanned the processes>show processes from all users and nothing stands out that seems to be using too much memory.

A:Gradual Progressive physical memory usage increase until BSOD

Just found a set of 2 dimms that could pass 5 hours of mem test with no BSOD or errors. It's possible I just had two sticks of RAM go bad. Will update if the RAM problem and BSOD occurs again.

7 more replies
Answer Match 64.26%

For windows 7 professional what can be checked besides sfc /scannow to work up software problems with the right lower hand corner clock time?

This notebook computer is new and was placed into use on 9/20/2015.  It has had problems with keeping time.  With windows 7 professional when the computer is in use or idle but not yet hybernating or in sleep the right lower hand corner clock would
display inaccurate time.  The time was checked by using the web site www.time.is which displays the amount of time behind or ahead.  The notebook after an updated time with time.windows or nist.gov or nw.nist.gov o a-nist.gov or b-nist.gov would
display exact time.  Then as the notebook was used the time would increase in the delay to a little over one minute and then somehow reset to approximately 0.6 seconds delay and then progressively delay again and again. 
HP offered to replace the CMOS RTC battery and the motherboard.  I had them just replace the CMOS RTC battery.  The notebook had no change after the replaced battery.  The date has never been incorrect.  The time has always progressively
delayed and then reset to a smaller delay with windows 7 professional.
When the replacement battery did not alter the behavior of the clock time delay HP had me check another operating system.  They had me use a utility on an external flash drive that formated it and installed the utility.  Then they had me download
and install U... Read more

More replies
Answer Match 56.28%

And so after 3 years of using my office computer full-time, bsod errors have finally begun to show up from rarely, to moderately and as of today, on a daily basis.

These bsod are more likely to happen when I am pushing my computer resources to the max like when running several x64 applications at once and using up almost all my 16gb of ram, or just the opposite, I am inactive with the use of my computer by not touching the keyboard or mouse at all for a couple of minutes and then the bsod occurs.

I often get stop 07A and stop 0F4 bsod errors caused by usually one of these three(volmgrx, fvevol, msrpc).sys

I am suspecting it probably is a hardware problem, like my harddrive or memory chips are starting to deteriorate. or there is a problem with partmgr.sys a file that manages your hd partitions

Things I have done to resolve it so far but are not working:
1) turn off paging file or changing it.
2) using windows update
3) unplugging my external harddrive
4) using system file checker(sfc /scannow) - it found iassdo.dll.mui as corrupt but could not fix it
5) disk defragmenting and memory diagnostics(found no errors)

- I am now desperate and asking you experts for advice as my last resort, otherwise I will either have to reinstall windows again or replace my hard drive and/or memory sticks.

Uploaded are my BSOD errors, log in my event viewer, my CBS.log and sfc details generated by system file checker, and the minidump generated by your own recommended programs DM log collect... Read more

A:progressive and recurring BSOD errors (volmgrx, fvevol, msrpc).sys

You are having a lot of errors.
It looks like a failing disk if you ask me.
It's worth giving Memtest86 a shot.

Memtest86 will test your RAM



   Information

Run Memtest86 for at least 8 passes so we get enough information to confirm that your RAM isn't failing

Run a Disk Check to scan for errors



   Note

Afterwards go into an Elevated Command Prompt (Run as administrator) and type in sfc /scannow
If it finds errors reboot and run the scan two more times

Run SeaTools to see if your HDD or SSD is failing

Post back the results.

The Chkimg command has found this.

Code:
3687 errors : !Ntfs (fffff8800132a001-fffff8800132afff)

9 more replies
Answer Match 52.92%

Hi guys,

Lately I have realize that since I got my new laptop, I have all this default program/services that start up but I feel like I can do better.
I've disable two or three programs but I am not sure on the other ones, whether they need to runned or not.
I am trying to figure out what I need and what I don't need... I am not sure if you guys can help but it's worth a try :\

Thanks

A:Trying to increase my boot time

There is only one program that needs to be in the startups and that is your AV program. ALL the others can be disabled. - unless there are some that you want like the sidebar (gadgets )or a dock.

9 more replies
Answer Match 52.92%

I like to set brightness to 50% at all times, but over the time it resets to the full strength (probably because of games), so I have to cut it by half again to 25% and then again to 14%, until it can not be lowered anymore, last time I ended somewhere around 3%.

I tried to set it to full, uninstall GPU drivers, restart, install them again, but it never got fixed.
It is not really a problem, I have it at 18% right now, I am just wondering, what is causing it?

A:Why does brightness increase over the time?

Display control centers usually mess with these settings.

For example AMD catalyst control center or Intel HD control center run services which might reset whatever you do.
making fixed changes there ( In control center ) could solve or at least explain what is going on.

Also Windows updates ( on fresh Windows usually ) reset screen settings.

2 more replies
Answer Match 52.92%

Hey guys, a few days ago I had to use my gigabyte's backup bios due to corruption, and now my pc takes upto a minute to boot instead of about 10-15 seconds. (stays on gigabyte screen till boot).

Any ideas?

A:Boot time increase

First why did you have to mess with the bios? The other part is most likely Windows doing some housekeeping ifit was a newer bios update you loaded.

1 more replies
Answer Match 52.92%

Hello- All of a sudden, my Windows 7 Pro SP1 x64 is taking longer to load/boot. In the Notification Area, I have 6 icons set.The network is taking 30-45 secs to load and sometimes I get a yellow triangle with exclamation point for 15 secs. Once that loads, the avast! and Anti Exploit icon come online about 20 secs later. I ran Process Monitor 'Enable Boot Logging', and looked at the time sequence of items loading and there are some gaps of a significant amount. There are more than what's illustrated in the attached photos. Also, note the errors and warnings in Event Viewer that appear associated.
I hope someone can help me out here. To the best of my knowledge, there is no malware present.
Thank you in advance.
tim

More replies
Answer Match 52.5%

fellas when i use custom pics as a screen saver , the default options for the duration of each pic is given as: Slow Medium Fast.
can i edit the time in seconds for the display of the pics via some registry setting or something.

for instance, i would like to use My Pictures folder for the screen saver and have each pic display for say,60 seconds.(Remember in XP we had the slider bar but that has been done away with in 7)

Thankx for any help

A:increase screen saver time

I don't think it can be done without a third party app.
I found this though.
Automatic Wallpaper Changer - Free software downloads and software reviews - CNET Download.com

6 more replies
Answer Match 52.5%

When you click on "Check for updates" with FF6, if there is an update available, Firefox now starts downloading the update almost immediately. Is there any way to increase the time elapsed before that download starts?

A:Increase time before FF6 update starts

You can set Firefox to "ask you what you want to do" by going to Options > Advanced > Update > check "Ask me what I want to do"

2 more replies
Answer Match 52.5%

Hey all!!

Newbie here, first post, please bear with me
I?ve got a PC with i7-3770 K, 32 GB of RAM and SSD hard disk and Windows 10 Pro
Before, when I turned off the PC, the shutdown was pretty much instantly
Now, Windows closes down instantly, but then stays on the blue SHUTTING DOWN page with the moving circle for about 20 seconds. Pretty annoying.....
Any idea why this might be??
Thanks for your help!!

More replies
Answer Match 52.5%

Besides setting power options, is there anything one can do to increase laptop battery run time?

I'm sure having sufficient memory will result in fewer hard disk accesses so that should have some effect on battery time.

When selecting a replacement hard disk, is there anything to look for in one or another that will affect battery time? It would seem a lower spin rate would use less battery power; but, would it, really?

Is there anything else?
 

A:Anything that can increase laptop battery time?

12 more replies
Answer Match 52.5%

I have a issue with the dvd spin-down time, that is very short and thus extremely irritating. When I browse some disc, dvd spins-up to full speed to read a file and after few (around 5) seconds without read request, it spins down (stops disc rotation). On next file that I want to browse, it starts to spin-up again, which takes some seconds.  This is very annoying and time-consuming when browsing lots of files, but I was not able to increase the time that disk stays rotating. I tried Nero DriveSpeed, but it was not able to help. I also found no help on the topic in the net. Do you have idea how to increase this time?  Thanks,  Tomhet

A:Z60m: How to increase DVD spin-down time.

you can increase the drive speed, by going into system property and property for cd-drive, there is drop down menu for dvd speed.

3 more replies
Answer Match 52.08%

Well I have had this machine for a while (Lenovo ThinkPad Tablet X201) and it came with Windows 7. I upgraded the RAM to 8 GB with cheap RAM from Ebay and it worked fine. I installed Windows 8 and very often get BSOD for Bad Pool Caller and not being able to write to blah blah, when I googled it briefly it seemed to be a problem with RAM and a lot of people were getting it with Windows 8 (I don't have the exact error code at hand). I also upgraded to an SSD so it could be that.
My Windows 8 is up to date and all drivers are fine. I installed Windows 8 from a USB booter that I made and now my laptop doesn't boot from the same USB with Windows 8.1 on it even when I go to BIOS and boot from USB it just boots from the SSD as normal. So I load Windows 8.1 ISO up from either USB or Desktop where I have copies, but in the key and go to install Windows 8.1 (I have tried both overwrite and save no files and keep my files) and it gets to 100%, reboots, crashes with BSOD and then doesn't install Windows 8.1. I sent my friend the error log and he sent this back:
BugCheck C2, {7, 11c1, 83414, fffff88000e7dec0}
GetPointerFromAddress: unable to read from fffff8036a16f168
GetUlongFromAddress: unable to read from fffff8036a16f1f8
GetUlongFromAddress: unable to read from fffff8036a0aa410
Probably caused by : CI.dll ( CI!I_FreeCatalogData+43 )
Well this doesn't mean anything to me and if I search for CI.dll I get loads of results, some of which are in System 32 so I can't just delete the... Read more

A:BSOD every time I try and install Windows 8.1

I also upgraded the BIOs a while back and it's the newest as far as I know, just going through and making sure all devices are on the newest drivers too but I am sure they are.

4 more replies
Answer Match 52.08%

Hi, I have been having this problem for a while, and I am looking for a fix.
When I install windows on to my computer using the disk, it will install fine. The problems start when I reboot windows after installing. The starting windows screen loads for about a minute, then it blue screens for about half a second, then reboots. When I use a Linux live cd to look at my files, everything in system32 folder is gone. I have wiped my hard drive twice already. I have tried using diskpart from the live cd, but when I run it I sometimes get a message about no fixed drives being found. I cannot boot in safe mode either.

A:BSOD Every time I try to install windows

Two possible causes for this problem that spring to mind.
 
1. The Windows install disk could be faulty or damaged.
 
2. The hard drive could be faulty or failing.
 
I hope this helps.

2 more replies
Answer Match 51.66%

Hi
I am using Tor Browser Bundle. I visit a website which takes some time to get data and respond back. But Polipo cuts the connection and says Proxy error: 502. I want to increase timeout limit so it may wait for 3 to 4 minutes for the server to respond back.
Any ideas?

More replies
Answer Match 51.66%

I have a cell with a date value of "4:00:00 PM" and I'd like to be able to hit the + key and increment it by 1 hour (so it would become "5:00:00 PM", then "6:00:00 PM", etc.). Is that possible?

P.S. I'm using Excel 2003.
 

A:Solved: Excel: Can I increase date/time with +/- key

9 more replies
Answer Match 51.66%

Hello, I recently noticed this strange behavior in my pc. When I restart my computer, cpu usage will stay around 20%, and fluctuate the usage of my processes (system host and firefox being the big hitters) to maintain this general figure. Upon putting my computer to sleep and reawakening, the symptoms are the same, except the usage hovers around 40%. This will continue until usage hovers around 99-100%.


I also just noticed that your TSG SysInfo (included below) says i have windows defender disabled, but I have been under the assumption that it is enabled. It has been since i uninstalled AVG as this was once a heavy hitter in my processes and I thought a cause to some of this.

Before this I didn't think this was a virus, because I've run multiple malware searches including malwarebytes in and outside of safemode but now I'm not so sure.

Also most likely related, my pc takes (literal) hours to shut down.

Please help me!! This issue has been driving me nutzo, having searched up, down, and orthogonal to the internet for a remedy, but to no avail. As a computer science major this has also bruised my ego a bit
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 8
RAM: 16178 Mb
Graphics Card: NVIDIA GeForce GT 750M, -2048 Mb
Hard Drives: C: Total - 905049 MB, Free - 561457 MB; D: Total - 25599 MB, Free - 22620 MB;
Motherboard: LENOVO, 20217
Antivirus: Windows ... Read more

A:CPU increase each time comp wakes up from sleep

Windows 8 has some non-standard (or at least different) way of reporting the status of Windows Defender, and the TSGInfo utility has not been updated to account for this.
 

2 more replies
Answer Match 51.24%

I ran into some computer trouble a couple of months ago. I was having random shut downs and a constant loop of power on for two seconds and power off. Even when it would fully post, the computer would crash after a few minutes. I have RMAed every part in my computer so far, but I am still getting BSOD crashes. This has become very frustrating. I have attached the logs

A:BSOD every time after fresh install of windows 7

Blue screens of Death are probably caused by faulty drivers.

Just to make clear you RMAed literally every piece of hardware?What are your specs?Maybe some components "don't like" each other.

Have you tried any other OS than Windows 7?Maybe drivers that come with Windows 7 cause BSOD because they aren't best link between your hardware and software.

2 more replies
Answer Match 51.24%

About a week ago i turned my pc on to find it took about 10 mins to boot and about 7 mins to log on which was a complete difference from the night before. Once fully loaded It works fine when using smaller programs such as firefox. When trying to run games or larger programs the computers perfromance has drastically decreased, games i use to be able to play, now time 10 mins or more to even get into the main menu.

i have trawled through internet pages through the week trying to find a fix, i have tried multiple virus,malware and trojian checkers with no results, i also have used ccleaner, to fix regesitry issues. i have checked settings of my hard drive and also checked it for any errors with no avail. generally im at a loose end now.

AMD athlon 64 X2 Dual Core 5000+
1920mb ram
ATI Radeon X1200 series
i have AVG and SUPERAntispyware installed and Zonealarm
if you need anything else give me a shout, thanks for your help

A:Sudden increase in boot time and decrease in Performance

Welcome to TSF,


Quote:




i also have used ccleaner, to fix regesitry issues.




I do not recommend you use the registry cleaner option with CCleaner. Please ignore the instructions about using it.

Here is a tutorial of how it is recommended you use CCleaner.

Deteting files using DiskCleanup is a useful link also.

How much free space on your C:\Drive? To find out, right click onMy Computer
Properties
How long is it since you have defragmented you system. Take a look at my maintenance program and run through it to assist your computer to run more as it used to.

kind regards,

3 more replies
Answer Match 51.24%

I cannot read Date & Time. I can left click and choose "Adjust Date and Time" then "change date and time" then "change calendar settings" to get the format I like, but I can not find any place to increase font size. Any help will be appreciated. bleeda

A:How to increase font size on Win7 Date & Time?

Hi bleeda, all I know is, if you unlock the taskbar it can be dragged up to display like this. Sadly, it does not increase the font.

4 more replies
Answer Match 51.24%

Hi,
My laptop is aspire e1-572g window8.1
Few days ago,my laptop boot time increase from below 15sec to 50+second and cannot shutdown completely.When i shutdown the laptop,it stuck at a black screen but the power light is still on.So i had to do a hardshutdown by pressing the power for few seconds.I remember that the only change i made on that day is install AMD Catalyst install manager and Intel Driver Update Ultility.I also update the AMD graphic driver to omega 14.12 using AMD's autodetectutility.I wonder if is the new AMD drivers makes my laptop suffer such problem?Should i rollback the driver version?If not how to fix it?
Sorry for bad english.

A:Laptop cannot shutdown completely,boot time increase

Do a rollback and then tell us if the problem is fixed.

7 more replies
Answer Match 51.24%

I thought I would have up to next July to decide when to get Win 10 going after the update procedure but it only gives 2 days  - how can I postpone it for much longer?

A:Win 10 ready updated but how to increase 2 days of postponement time?

You can postpone it indefinitely I think by just ignoring the message and closing the window. If you want, you can uninstall the KB3035583 and simply upgrade via the Media Creation Tool whenever you are ready.

7 more replies
Answer Match 50.82%

Hello all, i have a wierd problem, some months before i used to have a software named sandboxie.Then suddenly some time i started experiencing BSOD errors about a message i dont remember but it was like "wrong write adress in memory".I unninstaled sandboxie and it stopped.Then 5 weeks ago i installed another sandboxie-like software named buffer zone pro and after install same thing happens random BSOD with same message.Also my pc has been formated in the meantime from sandboxie and bufferzone for other reasons but the problem still remains.Thanks for any help.

A:BSOD every time i install a sandbox style software

  
Quote: Originally Posted by orestisssss


Hello all, i have a wierd problem, some months before i used to have a software named sandboxie.Then suddenly some time i started experiencing BSOD errors about a message i dont remember but it was like "wrong write adress in memory".I unninstaled sandboxie and it stopped.Then 5 weeks ago i installed another sandboxie-like software named buffer zone pro and after install same thing happens random BSOD with same message.Also my pc has been formated in the meantime from sandboxie and bufferzone for other reasons but the problem still remains.Thanks for any help.


Try visiting Bufferzone's support site for assistance;

Trustware - Support

HTH

1 more replies
Answer Match 50.82%

Hi!

I've defraged C and cleaned up my start up programmes in msconfig and also tried bootvist but that seems to have slowed boot time down not speeded it up??

When I boot up and go into task manager my CPU is going like crazy at around 90% for about 5 minutes it finally boots up at around 7 minutes.

I'm on windows xp home SP3, 80gb HDD, Intel Pentium Dual Core 1.73 ghz and my laptop is only 6 months old.

Does anyone know a good programme to speed things up??

Kind regards,

David.
 

A:Solved: Can anyone recommend a good programme to increase boot time??

16 more replies
Answer Match 50.82%

I am running Windows 7 Ultimate 64-bit.

I use Windows Explorer heavily. I am constantly moving files and batches of files from one folder to another. I have one very annoying problem with this but I bet there is a way to fix it.

Here's what I do - I highlight several files in the right pane, I hold down the right-mouse-button over the selected files, I drag them over to a folder in the left pane, and then the annoyance happens. If I don't drop those files immediately into that folder, the entire list of sub-folders pops open as if I hit the little plus to the left of the folder. What makes this a major annoyance is that the folder I wanted to move into has now changed its position in the left pane because the sub-folders popped open.

Now, sometimes I desperately need the sub-folder list to open because I forgot to find the folder I needed before moving the files. It is a nice feature. However, if only I could increase the delay-time. I'd like to give myself triple the time to drop the files into the folder before the sub-folder list opens. There has to be a registry tweak for this. Anyone have any ideas?

ps - I don't think the MenuShowDelay value found under HKEY_CURRENT_USER\Control Panel\Desktop has any effect on this because I have tried it.Thanks for your time and courtesy!

A:Windows Explorer - increase delay time when dragging&dropping

Hello Oxgt2e,

You might see if using the below to add "Copy to Folder" and "Move to Folder" to the context menu may make doing this easier for you. This way you will not have to worry about the delay time.

Context Menu - Add Copy To Folder and Move To Folder

Hope this helps,
Shawn

3 more replies
Answer Match 50.82%

Hi y'all,

OK, this is a noob question, I know. But, I'm a noob when it comes to tweaking XP.

I know the first part. You know, when you move the cursor over a particular icon/folder/system tray icon/certain enabled features on an IE page, a description balloon will popup. But, my description balloons, whether in Windows Explorer or Internet Explorer, will only stay open for about 5 seconds. How do I increase the time of the display balloon?

If there is a registry tweak of some sort, I'm completely unaware of it.

Thanks in advance for any advice.

A:How to enable popup description balloon and increase the time of the display?

http://www.kellys-korner-xp.com/xp_tweaks.htm

Click on #7

To use the Regedits: Save the REG File to your hard disk. Double click it and answer yes to the import prompt. REG files can be viewed in Notepad by right clicking on the file and selecting Edit.

To use the VBS Files: Download .vbs file and save it to your hard drive (you may want to right click and use Save Target As). Double
click the vbs file. You will be prompted when the script is done.

4 more replies
Answer Match 50.82%

Hello and thank you in advance for any help.  I try to keep my Windows 7 Home Premium up to date and typically manually install Windows Updates monthly with nary an issue.  This month (October 2013), however, while installing all of the important updates (except IE10 and the Windows Malicious Software Removal Tool), my laptop froze partway through the installations.  After powering off-powering on my laptop seems to function fine but for 2 things:  update KB2862335 is in an endless update-failed loop (after a few days of this I hid the update to avoid this cycle) and my boot time has increased roughly tenfold, from about 10 seconds to almost 2 minutes.  While I realize that the increased boot time isn't necessarily a huge issue since the computer still functions properly, I'd like to solve this puzzle and derive the benefits from my extra RAM and SSD  (as well as scratch a brain itch).  For the last few days I've been poking away at the problem with no success.  I've:
 
Uninstalled all the successful October updates then reinstalled them (KB2862335 still continued it's update-failed loop and boot time was still increased).
Renamed C:\Windows\Software Distribution and attempted to update (KB286335 still continued it's update-failed loop and boot time was still increased).
Run the command prompt sfc /scannow, from the desktop and the Repair Console with the same result:  failure at 54% and the error message "Windows Resource Pro... Read more

A:Tenfold Increase In Boot Time After Failed Windows Update

Try this:http://support.microsoft.com/kb/971058

2 more replies
Answer Match 49.98%

Hi, this will definitely require going into the registry editor. It's a small, but annoying hassle for me.

When I'm dragging something in File Explorer, too often, just by moving the cursor over some folder, the stupid folder will expand, causing me to have to scroll down (sometimes over a page) to get to the folder I want.

So, how do I increase the time from when a folder auto-expands on mouseover? Right now it seems to be in a hair trigger. I guess I'm moving my mouse too slowly, but it frequently expands some random folder I was over.

EDIT:
SOMEWHAT RELATED TO THAT:
How safe is using the method below for Windows 10 to keep all your zip files in a folder from showing up in your Navigation pane?
Zip Folders - Enable or Disable Windows Explorer View - Windows 7 Help Forums

Thanks! Great board, guys. Loved the sevenforums before my update too.

More replies
Answer Match 49.98%

Hello and thank you in advance for any help. I try to keep my Windows 7 Home Premium up to date and typically manually install Windows Updates monthly without issue. This month (October 2013), however, while installing all of the important updates (except IE10 and the Windows Malicious Software Removal Tool), my laptop froze partway through the installations. After a powering off-powering on my laptop seems to function fine but for 2 things: update KB2862335 failed, with error code 80070002, and is in an endless update-failed loop (after a few days of this I hid the update) and my boot time has increased roughly tenfold, from about 10 seconds to almost 2 minutes. While I realize that the increased boot time isn't necessarily a huge issue since the computer still functions properly, I'd like to solve this puzzle and once again derive the boot-time benefits from my extra RAM and SSD (as well as scratch a brain itch ). For the last few days I've been poking away at the problem with no success. I've:

Uninstalled all the successful October updates then reinstalled them (KB2862335 still continued it's update-failed loop and boot time was still increased).
Renamed C:\Windows\Software Distribution then attempted to update (KB286335 still continued it's update-failed loop and boot time was still increased; also, my update history is now truncated , live and learn).
Run the command prompt sfc /scannow, from the desktop and the Repair Console, multiple times each, with the sa... Read more

A:Tenfold Increase In Boot Time: Failed Win 7 Update KB2862335 (8007002)

I no expert on such things but some more information would be helpful
when one get here.
Fill in your System Specs including what security programs you have installed. This Tutorial from Brink will help.

System Info - See Your System Specs

8 more replies
Answer Match 49.56%

Hi everyone,

First of all, my PC specs

EVGA GT430 1gb DDR3
4 gb RAM (2x 2gb)
ASUS M2N68-AM PLUS (NVIDIA Geforce 7025/nForce 630a)
500gb HDD Samsung (SATA)
AMD Athlon II 640 4x 3.1ghz
Windows XP 32-bit
BenQ DVD+-DL burner (SATA)
LG DVD ROM (IDE)

The problem is that when I try install Windows 7 or even Vista, While rebooting up after part installation, the BSOD shoots out, with a ACPI error and when I disable ACPI 2.0 it shows another BSOD.

I'm sure it's the BIOS of the mobo, because I've read lots of ASUS mobos with this problem.
But I also think it maybe the HDD; On other OS eg. XP, it shows 128gb available, so i have to use partition magic to recover the rest.
So if an of you could help with this problem it would be great.
I can install all other O.S. on this PC.
I've installed XP 32 and 64 bit, Ubuntu aswell.
And I've tried wiping the HDD completely with Dariks boot and nuke (dban) and then installing, still no luck.

If there is anything else you need just post here or email me, I will get back to you ASAP.
Thanks

A:BSOD pops up, every time I try install Win7(32/64) on nforce 630a mobo

Make sure you have the latest BIOS update. If so, Reset CMOS: Clear CMOS - 3 Ways to Clear the CMOS

While in BIOS setup set SATA controller to AHCI mode to try install. Remove all but one HD and all peripherals, physically uninstall any floppy drive and unplug your CD drive.

Where did you get Win7? Confirm ISO integrity, burn another with ImgBurn at 4x speed. If this fails write to flash stick using Universal USB Installer with Win7 in dropdown menu, boot under USB, Removable or HD's. Unplug the DVD drive while trying this.

Remove all but 2gb RAM to try install, swap RAM sticks, test RAM: RAM - Test with Memtest86+

Next test your HD with maker's HD Diagnostic extended CD scan.

When I run out of time to troubleshoot failing installs I move the HD to another computer plugged in alone to install, then SysPrep it before returning to target machine where it will start up to reinstall all drivers, requesting several restarts: SysPrep to move HD to another computer

1 more replies
Answer Match 49.56%

I have the following formula in a cell:

=IF((Sheet2!$F$8=Sheet2!$AK$3),(Sheet2!$C$2),(""))

I need to copy this fomula down through 174 rows with the 'sheet number' increasing by 1 in each row.

So the next row should read:

=IF((Sheet3!$F$8=Sheet3!$AK$3),(Sheet3!$C$2),("")) and so on for 174 rows. Is there a way to do this without editing every row?
 

A:Solved: Copying a formula in excel 2011 to increase sheet number by 1 each time

7 more replies
Answer Match 46.62%

I've been trying to reinstall Windows 7 Pro x64, but I'm having issues with boot time. Once the Windows animation appears, it normally takes ~5 seconds to get to a desktop (before the logo even forms), but within an hour or two, the boot time will seemingly randomly increase to 25-30 seconds. The few things I do before it happens are install the drivers Windows doesn't find, plug in my other drives, and run Windows update. Once the boot time increases, I've tried to system restore to a time before it happened, but only another clean reinstall will put the boot time back to normal. Usually, it'll be fine and I won't even change anything at all for many reboots, and randomly it'll start happening on the next one. I've also tried removing my other drives again, installing Windows as both UEFI/GPT and BIOS/MBR, and reverting practically everything I'd done except drivers and updates. Both SSDs I've tried are reported in good health. Clean boot still suffers from a long boot, and safe mode also seems to take long. Chkdsk and sfc /scannow both come back clean. I'm probably on around 30 clean installs and can't figure it out.

I made a boot trace, but I can't really interpret it, although it seems to be doing absolutely nothing with this extra time - https://www.dropbox.com/s/5cv9y9as7o...trace.zip?dl=0

A:Clean SSD install, random 5-6x boot increase shortly thereafter

Unfortunately Cluberti was our resident startup/shutdown trace goto and is not around these days but what your describing does not seem to far from the norm I would agree that is a bit of a difference from vanilla install to the delay but I would expect to see it go a bit after updates and drivers etc

Hopefully we have another member who can interpret the results you have

2 more replies
Answer Match 46.2%

Hello fello computer entuistiasts.

I'm having serious issues with my PC after I tried to install a new graphics card. Some details first about my PC

OS: Windows 7 64bit
CPU: Intel I7 930 (was overclocked to 153blck and everything else set to auto)
Motherboard: ASUS P6TD
Memory: 3 x 2gb Corsair XMS3 DDR3 1600mhz @ 1.65v
Graphics card: Was Radeon 1650, new card Sapphire Radeon Hd 5870
PSU: Coolermaster RealPower 700W Modular PSU
CPU Fan: Noctua NH-U12P Dual fan
HDD: Western digital velociraptor 150gb @ 10,000rpm
Others: Sata DVD drive, Sweek PCI wifi card and additional sata 7200rpm hdd

So, i've recently built this rig and it was working perfectly, wonderful speeds compared to my poop pentium 4. I tried a bit of OC on the CPU and raised the BLCK to 153 @ 21 multiplier = 3.2ghz. The cpu temp 32c idle and no more than 55c stressed. MB temp usually about 35c. - So excellent

The problem started when I tried to fit a new graphics card, the Radeon 5870. I finally managed to fit the beast of a card in and it had 2 x 6pin connecters which i hooked up to the PSU. Started the up the rig, got as far as the Windows logo and then quick flash of BSOD and the PC restarted. This kept happening on continual loop at the same point. So I tried these, of which none worked

- put back the OLD graphs card
- put BIOS to default (no onboard graphs)
- cleared CMOS
- tried windows repair
- tried safemode
- tried start windows in low res mode
- tried each RAM module on its own
- remove... Read more

A:Cant increase cpu voltage by more than 1v without BSOD

just to add, i was researching the fuzziness aspect of the graphics card and it may be due to hdmi to hdmi settings. Cant really test it out till Monday.

I guess no one has an idea about the above then?
 

3 more replies
Answer Match 45.36%

Hi everybody ::- ).

One thing which has me perpetually angry at the ALT+TAB application selection window in Windows 7, is that after a time (about 1 second) it hides the window I triggered it from, replacing it with the window of the currently selected application.

So let's say I'm typing this in FireFox and I press ALT + TAB. As soon as I do this, a timer starts. When it reaches about 1 second, it just hides my FireFox and shows me my Outlook, because that's the next window I have opened.

I don't like this behavior and I would like to know how to change it.

When I hit ALT + TAB I sometimes do it just to see what I have opened or I take a bit more than 1 second to decide where exactly I want to jump. Hiding my currently focused window is distracting & annoying. So I would like to somehow increase that interval to 5-10 seconds. Is this even possible?

IMPORTANT:
- I found out about HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\AltTab "LivePreview_ms" but it doesn't really do the trick. I set there 7000 (decimal) and it kinda' increased from 1 second to 2.5 seconds. Setting 15000 did no further change. Weird. And yes, I restarted explorer.exe all the time.
- I also found out about HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced "DesktopLivePreviewHoverTime" and that doesn't help either.

Thank you in advance!

A:How can I increase ALT+TAB "full-preview" time?

  
Quote: Originally Posted by http://social.technet.microsoft.com/Forums/en/w7itproui/thread/9ebf508d-835f-4603-9dea-5b6bfdeda93e


Open Registry Editor and create the following registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\AltTab. In that key, create the following DWORD value: LivePreview_ms and set it to the delay (in milliseconds) of the first live preview.


— "Win7 Alt+Tab 1 sec" in Google.

I've just tried it and it takes effect immediately.

7 more replies
Answer Match 45.36%

When playing wow My tracert starts out like this:
Tracing route to us.logon.battle.net [12.129.206.130]
over a maximum of 30 hops:
1 1 ms 1 ms 1 ms homeportal [192.168.1.254]
2 25 ms 24 ms 24 ms 108-213-76-2.lightspeed.frokca.sbcglobal.net [108.213.76.2]
3 * * * Request timed out.
4 26 ms 25 ms 147 ms 75.29.64.72
5 26 ms 24 ms 27 ms 12.83.77.137
6 37 ms 37 ms 36 ms gar20.la2ca.ip.att.net [12.122.128.181]
7 38 ms 37 ms 38 ms 12-122-254-238.attens.net [12.122.254.238]
8 38 ms 39 ms 39 ms mdf001c7613r0004-gig-10-1.lax1.attens.net [12.129.193.250]
9 12.129.211.38 reports: Destination net unreachable.

Then my world lag starts increasing roughly after 15min to and tracert looks like this:
Tracing route to us.logon.battle.net [12.129.206.130]
over a maximum of 30 hops:
1 1 ms 1 ms 1 ms homeportal [192.168.1.254]
2 25 ms 24 ms 25 ms 108-213-76-2.lightspeed.frokca.sbcglobal.net [108.213.76.2]
3 * * * Request timed out.
4 * 27 ms 25 ms 75.29.64.72
5 23 ms 24 ms 29 ms 12.83.77.137
6 37 ms 36 ms 37 ms gar20.la2ca.ip.att.net [12.122.128.181]
7 39 ms 39 ms 38 ms 12-122-254-238.attens.net [12.122.254.238]
8 37 ms 37 ms 38 ms mdf001c7613r0004-gig-10-1.lax1.attens.net [12.129.193.250]
9 12.129.211.38 reports: Destination net unreachable.
Trace complete.
Then I start to freeze randomly and world ping goes through the roof (3000ms +). The Tracert looks like:
Tracing route to us.logon.battle.net [12.129.206.130]
over a maximum of 30 hops:
1 2 ms 1 ms 1 ms homeportal [192.168.1.2... Read more

A:Progressive wow lag

8 more replies
Answer Match 45.36%

im new here, and i think you guys can solved my problem
i bought a new PC and fresh install it with windows 10, then the bsod come it keep happening to my pc.
then i decide to upgrade my windows 10 to windows 10 pro but bsod stand still.
the problem is when i play dota 2 chance my pc to hit by bsod increase, when i play other games like WoW thats never happen, please help
DESKTOP-FRI8C3C-Fri_08_19_2016_211156_86.zip

More replies
Answer Match 44.94%

If a progressive scan DVD player is connected to a TV which is interlaced will it play as progressive scan?Is LCD screen progressive or interlaced?
 

More replies
Answer Match 44.52%

Just wondering because i am using my Laptop without battery>

A:Does a Laptop Running without Battery increase chances of getting BSOD

No not at all.


Steve

2 more replies
Answer Match 44.52%

Did this and it caused bsod which resulted in me having to install quite a few drivers.

Managed to get the computer up and running again perfectly but thought it would be a good idea to have someone here have a look at the logs before I delete the entire systems log files and create my disk clone etc etc.

Attached .zip as tutorial requests.

Note: IP and logon details edited out of logs.

A:BSOD win 7 ultimate 64 bit. IRQ8 Priority increase regedit.

Hi,

Please reconfigure windows to collect the correct info as there are no dump files in your zip.
You want small memory dumps - "MiniDumps"

Dump Files - Configure Windows to Create on BSOD

And here are the instructions for posting:

http://www.sevenforums.com/crashes-d...tructions.html

cheers

Dave

5 more replies
Answer Match 44.52%

The first sign of this problem was frequent "loss" and recovery of internet explorer tabs. I ran Spyware S & D, but didn't find anything that I suspected would cause such a problem. I attempted to run McAfee Enterprise, and (after the "on demand" virus scan console opened) received an error message indicating that something was too old and needed to be updated. I was given two options: obtain the update or run the program without the update. If I attempted to obtain the update, the program froze. If I ran the program without the update, nothing is found.

The computer has begun to freeze more frequently, and I am now running in safe mode w/networking to avoid the "freezing." Below, you will find the contents of the dds.txt log. Please help.

DDS (Ver_10-03-17.01) - NTFSx86 NETWORK
Run by Mickey at 14:41:53.12 on Tue 11/30/2010
Internet Explorer: 8.0.6001.18702
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.3054.2609 [GMT -5:00]


============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\system32\svchost.exe -k netsvcs
svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Internet Explorer\IEXPLORE.EXE
C:\Program Files\Internet Explorer\IEXPLORE.EXE
C:\Program Files\CCleaner\CCleaner.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE
C:\Documents and Settings\Mickey\Desktop\Virus Removal Tools\dds.scr

============== Pseudo HJT Report ==============... Read more

More replies
Answer Match 44.52%

Hello,
 
So one day my wireless internet stopped working on my Dell XPS 15z running windows 7.  Ran the troubleshooter everything was fixed...for a few hours.  Repeat the troubleshooter and things were fixed again, but only for a limited time.  Ran avast! and found nothing.  The error messages I kept getting were "default gateway is not available" and/or "problem with wireless adapter or access point"
 
So i began to check other things.  It's not my internet, as plugging in via ethernet works just fine.  Not my router, as I would get the same error messages on other wireless router networks.  Dell replaced the motherboard just before this because of some other problem, so I'm having them replace it again.  They just replaced the wireless card 2 days ago and nothing.  It would work again for a few minutes before it would stop.  Now today my laptop doesn't even see a wireless card existing.
 
Thoughts, questions, suggestions?  Any help would be appreciated.  If you need more info, just ask!
 
Thanks!
 
~Supersox

A:Progressive Wireless Problems...Need Help!

I forgot this as well. after a few days, i noticed my computer would completely shut down (not hibernate or sleep) at some point after i stepped away from it. Upon restart, I was informed that something had gone wrong and the error message i get after rebooting says the details of the shutdown are as follows:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 9f
BCP"
1: ****-****-****-****
BCP2: FFFFFA8006CF1060
BCP3: FFFFF80000B9C3D8
BCP4: FFFFFA800B5C8BD0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\101613-30607-01.dmp
C:\Users\David
M. Behm\AppData\Local\Temp\WER-117515-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Window
s\system32\en-US\erofflps.txt

1 more replies
Answer Match 44.52%

Hi all, I know this has nothing at all to do with computers but I can't seem to find which of the 2 is better. I have a Hitachi RPTV and it has a feature called 3:2 Pulldown, to use this option i cannot be using progressive scan on my dvd player. So my biggest question here is what is better progressive scan or 3:2 pulldown... for picture quality... i really can't tell the difference so it is not a huge deal but i was just curious about this... if anyone has any ideas at all. thanks
 

A:Progressive scan or 3:2 pulldown

6 more replies
Answer Match 44.52%

Hello,

I am currently using a program that seems to crash progressively. The computer is not hooked up to the internet and has avast antivirus installed on it, which I manually update regularly.

I have reinstalled xp
I have reinstalled the program that I am using for collecting microscope images.

Every time after a reinstall, the program seems to work...maybe for a day...the next day it will crash once and about a week later it will be crashing 5-7 times a day.
Crashing includes a bluescreen about 1 out of 5 crashes that instantly reboots the computer

My question is: Is this increase in crash rate indicative of hardware problems or program issues? It seems to me that it must be an issue with a program building some sort of "bad info" that it is using on successive uses.

Thank you very much to anyone that has any insight into this issue.
 

A:Progressive Crashing Frequency

for any one to help you out better. it would be a good idea to post what kind of PC you haveand what OS your running and the specs. and the name of the program that is crashing.
 

2 more replies
Answer Match 44.52%

Often when I am saving an image, I will be presented with an option to save as a STANDARD or PROGRESSIVE Jpg. What is the difference and which one will produce a bettr image?

Thanks in advance

DAVID
 

A:Saving as a PROGRESSIVE Jpg. A few questions.

Are these captures from an NLE?
 

2 more replies
Answer Match 44.52%

I am running Windows XP using Firefox. I got the System Progressive Protection virus. I ran Malwarebytes and can use the computer now but "iexplore.exe" is still running in the background. Also, Microsoft Security Essentials pops up every few minutes with a "Detected threats are being cleaned" message. What do I do now?
Thanks, in advance.

A:System Progressive Protection

Welcome aboard Download Security Check from HERE, and save it to your Desktop. * Double-click SecurityCheck.exe * Follow the onscreen instructions inside of the black box. * A Notepad document should open automatically called checkup.txt; please post the contents of that document.=============================================================================Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.====================================================================================Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result.=============================================================================Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop. * Double-click mbam-setup.exe and follow the prompts to install the program. * At the end, be sure a checkmark is placed next t... Read more

1 more replies
Answer Match 44.52%

I have as a second PC, a MiniCompaq netbook that functions nicely. I get 14mb from the router. I have been noticing that Firefox is getting slow. I have already performed all the settings in about:config and I disregarded a paid a square antivisus that clearly makes Firefox slow. But I still feel it slower than at beginning. I uninstalled every complement also. I will thanks very much a new advice for this problem. Friendly cheers

A:Progressive Firefox slowness

What are the system specs?

3 more replies
Answer Match 44.52%

Helloes
Pz say to me how to remove the System Progressive Protection which I was attacked by him.....Thnx

A:system progressive protection 3.7.17

Hello nrimawi.

Please follow these instructions closely here at this site.
System Progressive Protection Removal Guide <-Let me know if you cannot go to that site.

Post back with any questions and to let us know how things are going.

1 more replies
Answer Match 44.52%

After reading your website I am sure I have System Progressive protection. I read the user guide written by Lawrence Abrams and have tried it a couple of times. I am using windows XP. I have followed the steps each time, but it does not seem to work. I boot into safe mode and then download one of the RKill downloads and it does it's thing and then posts a report on my desk top. Each time I have attempted to remove the vius/worm I have tried a different version of RKill. So then I move on to scanning my computer. I use Microsoft Security Essentials. I have run full scan twice and found and removed "unwanted software". Then when I have removed it I am prompted to "restart" the computer to let changes take effect. When it boots back up in normal mode the System Progressive Protection thing pops up again and obviously I did not get rid of it. I would guess one of two things is going on. Either it is not stopping the virus when I run RKill or I am rebooting back into normal mode and I should not be doing that. What should I do? With this description can you tell what I might be doing wrong? I know this is not a really serious problem but I would prefer to get rid of it. I am so close to fixing this issue but I can't seem to completely get rid of this thing. Please help. By the way. Thanks for the site. You all do wonderful work here. Thanks again. Looking forward to hearing from someone.

A:System Progressive Protection

Can anyone help me with the issue I am having? Thanks.

5 more replies
Answer Match 44.1%

Playing Skyrim runs fine for at least 30 minutes before the bsod. This has happened several times, this is the most recent crash. Zip file attached.

A:BSOD playing Skyrim, 1000007E this time. New crash code each time

The latest BSOD was caused by the Linksys AE2500 driver, check if there's a newer version available.

fffff880`06040000 fffff880`06177000 AE2500w764 Tue Mar 29 02:22:08 2011 (4D912630)

2 more replies
Answer Match 44.1%

it happens time to time and is usually when i open adobe photoshop,aftereffects. Also i cannot seem to open any kind of games on my new computer like fifa 13 ,nfs etc. I have an i7 3770 and 8 gb ddr3 corsair RAM with 1 tb hdd and motherboard is msi B75MA-P45 and geforce gtx560 for graphics card. my FSB: DRAM reads 1:6 on cpuz, does this have anything to do with the blue screen ? should i do anything in the BIOS settings ?

A:New built computer bsod's time to time.stop error 0x000000a

Hello Sonam.

Nice configuration. But it is the display driver that caused here.

Code:
fffff880`0a48fb88 fffff880`0ffb47c9Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0xbd7c9
What I have seen, the October edition is somehow problematic on a lot of machines. So I would suggest you to do what I did myself.....
Uninstall nVidia display driver using Driver Fusion , and then install an older version which was stable there.

And, you should install Service Pack 1.

Let us know the results.

4 more replies
Answer Match 44.1%

Hello,

My computer was recently infected by System Progressive Protection virus, which I removed using RKill and Malwarebytes Anti-Malware. In the process, the Antimalware detected and removed several Trojans and Rogues. How do I ensure that my computer is not infected? Any suggestions on additional scans that can be performed?

Thank you so much.

A:System Progressive Protection Virus

Download Security Check from HERE, and save it to your Desktop. * Double-click SecurityCheck.exe * Follow the onscreen instructions inside of the black box. * A Notepad document should open automatically called checkup.txt; please post the contents of that document.=============================================================================Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.====================================================================================Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result.=============================================================================Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop. * Double-click mbam-setup.exe and follow the prompts to install the program. * At the end, be sure a checkmark is placed next to Update Malwar... Read more

12 more replies
Answer Match 44.1%

? My advanced system log says that on July 20 the Protocol Handler could not be loaded , IEPH.RSSHandler. also, Entry in the Hash Map cannot be updated.Context: Windows Application System Index Catalog. Device not functioning (0X8007001f).
Since then, I've had dozens of "events", I can't open programs because Windows can't find the .dll or .exe, and I can't get on the net. Not on that computer, anyway.
My son says it's a virus, I thought it might be a mechanical thing (as in "device not functioning").
I can use the CD player to burn and view files on Win Media Player, and I've been saving my records/videos to disc to prepare for erasing the hard-drive. But I keep thinking it's a mechanical thing, and I am being stubborn about it. But not so stubborn as to not be able to re-enter cyberspace.

Thanks for your help. I'm off the the glossary to see what is a HASH Map?

A:Progressive Devolution of XP Home Edition

It sounds like your hard drive is dying. Can you please post some specs for it?

11 more replies
Answer Match 44.1%

I think my laptop is infected by the System progressive protection malware. Whenever I turn on the laptop, window will hange at the booting stage without reaching to the desktop page.

To reach to the desktop page successfully, I need to boot window in safe mode and select start window normally option. Once window is at the desktop page, program name "system progressive protection" will do the scanning automatically and listed out several infected files on my laptop. All the programs that I try to execute are prohibited by this malware.

I am very grateful for your help to solve this problem. I have done the HijackThis, DDS, and GMER scanning. Please see below log files. Thank you.
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 9:06:49 PM, on 12/28/2012
Platform: Windows 7 (WinNT 6.00.3504)
MSIE: Internet Explorer v8.00 (8.00.7600.16385)
Boot mode: Safe mode with network support

Running processes:
C:\Windows\System32\smss.exe
C:\Windows\system32\csrss.exe
C:\Windows\system32\wininit.exe
C:\Windows\system32\csrss.exe
C:\Windows\system32\winlogon.exe
C:\Windows\system32\services.exe
C:\Windows\system32\lsass.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe
C:\Windows\system32\svchost.exe
C:\Windows\System32\svchost.exe
C:\Windows\system32\svchost.exe
C:\Windows\system32\svchost.exe
C:\Windows\system32\svchost.exe
C:\Windows\system32\svchost.exe
C:\Windows\system32\svchost.exe
C:\Windows\Explorer.exe
C:\Windows\system32\ctfmon.exe
C:\Users\... Read more

A:System Progressive Protection malware

16 more replies
Answer Match 44.1%

my computer was infected by Rogue "System Progressive Protection"
but it was protected by my NOD32 antivirus.
therefore some of it left on my computer eg. it's icon and some file without extension
on my C:\Documents and Settings\All Users\Application Data\(random number)

i am not sure that my computer is slower than before or not!!

i attached hijack this log file along with my post..
please help me to check is my computer still in good condition or not??...
Many thanks in advance
===============================================================================
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 11:22:37, on 3/11/2555
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\ibmpmsvc.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Lenovo\Bluetooth Software\... Read more

A:infected with System Progressive Protection

Hi jackoff

I will be handling your log to help you get cleaned up. Please give me some time to look it over and I will get back to you as soon as possible.

White Warrior

6 more replies
Answer Match 44.1%

Hi,
I got the System Progressive Protection a couple weeks ago, but have had only a little of time to work on fixing it since then. I have kept my computer off for much of that time, only when trying to fix it.

I am not sure if my trend micro didn't find it or the virus was not allowing it to find anything. I immediately went to safe mode and downloaded Malewarebytes and started scanning. It found quite a few files. I continued removing them. Then I rebooted. When starting, my computer would freeze after getting to the home screen. So I would go back to safe mode and rerun malwarebytes only to find a file again. I did this a few times with same result thinking the virus was somehow reinstalling itself on startup. Then finally no files were found. So I restarted and the computer still froze. I then realized that I was running two virus programs, Trend Micro and Malwarebytes and thought maybe they were interfering with each other. So I uninstalled Malwarebytes and restarted. My computer has not frozen since. I ran a full scan using Trend Micro and got a list of things that it has found and deleted or quarantined. I am wondering how I know if I have fully and successfully removed everything I need to from my computer and am ok to use like normal.
Any help is much appreciated.

Thanks.

----------------------

DDS (Ver_2012-11-20.01) - NTFS_x86
Internet Explorer: 8.0.6001.18702
Run by Jason at 10:55:40 on 2012-12-09
#Option Extended Search is enabled.
Micros... Read more

A:System Progressive Protection - am I clean

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps.===Please download ComboFix from one of these locations:Link 1Link 2* IMPORTANT !!! Save ComboFix.exe to your DesktopDisable your Anti-Virus and Anti-Spyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our tools
Close any open browsers, and all other programs working. Make sure you save your file if working on a document.
Do not install any other programs until this if fixed.[/b]
Double click on ComboFix.exe & follow the prompts.
As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's strongly recommended to have this pre-installed on your machine before doing any malware removal. It will allow you to boot up into a special recovery/repair mode that will allow us to more easily help you should your computer have a problem after an attempted removal of malware.
Follow the prompts to allow ComboFix to download and install the Microsoft Windows Recovery Console, and when prompted, agree to the End-User License Agreement to install the Microsoft Windows Recovery Console.
Some Rookit infection may damage your boot sector. The Windows Recovery Console may be needed to restore it. Do not bypass... Read more

11 more replies
Answer Match 44.1%

Hello Experts,I have win 7 and installed Microsoft Security Essential (MSE) with latest updates. System Progressive Protection (Malware) showed up and hijacked my computer. My windows firewall is ON. I am wondering, how does this malware come into my system and changed folders/registry. How did MSE allow to make such changes? As I googled, there are suggestion to install additional antivirus software. Is it necessary to go in that direction? Thanks in advance.

A:System Progressive Protection - Malware

Welcome RIMD... Please follow our guide System Progressive Protection Removal Guide Post the log and tell us how it isThe log is automatically saved and can be viewed by clicking the Logs tab.Copy and paste the contents of that report in your next reply. Be sure to post the complete log to include the top portion which shows the database version and your operating system.

1 more replies
Answer Match 44.1%

Dell Dimension 4100. Windows XP Home Edition Version 2002 Service Pack 3. Intel Pentium III processor, 730 MHz, 512 MB RAM. 20 GB Hard disc, 15% free.
Friday 6 August. Accessed Internet OK. Couldn't open Outlook Express. Wouldn't update BullGuard anti-virus at first but did later in day. Opened Word followed by a file, but after closing wouldn't open again later in day. Could access system restore, but couldn't restore. Now can't access. Managed to initiate virus scan using BullGuard but terminated at 15% completed, oddly while scanning secondary disk, i.e. one that didn't contain the operating system. Later, couldn't initiate virus scan at all. Couldn't access defrag at first, then could and did. Completed defrag. Can access Windows Explorer and delete files. Removed some files from hard disc to increase available disc space (only a little till now), emptied recycle bin. Tried to defrag again, but couldn't access. Can't shut down normally, have to use button on tower.
I'd be grateful for any ideas as to what to try next. Thanks.
 

A:Solved: Progressive shutdown of applications

10 more replies
Answer Match 44.1%

hi! i'm a techspot newcomer, and i'm posting here my first problem.

I have a quite old acer aspire 1300 with win xp home installed. When it was new, it worked good. but since last year, it started slowing down. so i formatted it, and reinstalled the os. but it is still too slow.
and then, sometimes it shuts down suddenly; i think it's an overheating problem, but can this even cause the slowing down? and if not, what causes it?

please, help me... thanks before
 

More replies
Answer Match 44.1%

I am running Windows XP. Yesterday I got the "System Progressive Protection" virus. I used Malwarebytes to remove it and I can now use the computer but I have "iexplore.exe" running all the time. I tried to delete it in the Task Manager but it pops back up immediately. Also, I am using MSE and it now pops up every few minutes with a "Detected threats are being cleaned" message.
What do I do now?
I have attached the files I believe will be needed.
Thanks in advance.
 

More replies
Answer Match 44.1%

I have an IBM clone with 333 processor and 13 gig hard drive, 64 RAM. Upgraded from Windows 95 to 98SE. Installed McAfee VirusScan Deluxe. Now I get progressive slowdown and mouse hangup and sound bouncing. McAfee has divided my hard drive and set up a drive space for backup (part of the Safe and Sound feature). Restarting the computer gets it back up to speed again but it's very annoying having to do that. Maybe I should return the McAfee and use Norton instead? Need answer soon as must return McAfee by May 8 to get refund.
 

A:Progressive slowdown and sound bouncing

Turn off macafee and if the problem goes away you know it's the additonal loaded being utilized by the program. Possible an additional 64 meg of ram would help. You could try disabling some of the features in macafee like the backup and see if the problem quits. Also if you have a lot of tasks running in the background, ie: screensavers, etc this will use up system resources and cause this type of problem.
 

2 more replies
Answer Match 44.1%

Hello.

I have been experiencing bluee screens of death in the last 9 months.
Sometime , at 3-4 days it just happens , randomly.
I hope you guys can help me.
System specs :

Intel Quad Core 2.5 GHZ
8 GB RAM
ATi RADEON 5850 HD
OS : Windows 7 x64 Ultimate full

The age of the system is about 2 years except for 4 gb ram and the video card which have been added last year.
the OS was installed when I added the parts above , so it's 1 year old.
The BSOD happens even if I am in a game , or on desktop , or in messenger.

I am attaching the file with the dumps and the health report to this thread.

Thank you

A:Random BSOD , from time to time , during normal daily activity!

the desktop window manager is crashing.
Are you using any custom themes or shells?

I do notice one problem you have though. You have the old Asus utility driver.
This needs to be replaced as it's a known trouble maker in windows 7.
I happen to have an asus board myself.
the new copy of the file will be attached here.
Manually overwriting the old one will work (I did it on my own system)
however, you will need to boot Safe Mode and locate ASACPI.sys
by navigating to c:\windows\system32\drivers
and overwrite the copy of the file there with the one I'm providing.
Then reboot normally.
This will solve that issue at least.
If the problem generally happens when the computer is entering a low power state, this would definitely be the cause of your problems.


Code:
Probably caused by : win32k.sys ( win32k!HmgLockEx+a3 )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff96000144613, Address o... Read more

3 more replies
Answer Match 44.1%

Hi everyone, recently I switched from my mini-itx board P8Z77-I to my old Z77A-GD65, since then I'm having stability issues.
My 2500k was stable at 1,32v, cooled by an H100i, my GPU is at @1200/1500, also tested and stable (7870xt), but now randomly the system hangs, with no bsod, mostly while gaming but also one time while I was using Chrome with a bunch of tabs opened, including YT; only one time I got a bsod, full report attached
Thanks in advance, Gabriel.

A:System Hang (mostly gaming, also 1 time using Chrome), 1 time BSOD

^up

1 more replies
Answer Match 44.1%

Hello, i just registered to this forum. I upgraded my hardware from AMD AM2+ platform to AMD AM3+, so basicly i changed my motherboard and memory( Asus M5A9, kingston 1333 4x4Gb), everything else is the same - CPU- AMD Phenom X6 1055, GPU- Gigabyte HD5830, OLD HDD (more than 3 years im sure, mb 5years) Seagate Sata 500GB. My previous system which was Gigabyte AM2+ MA790GX+Apacer 800mhz 8Gb DDR2 was fine and no BSODs ever.
Oh and becouse i have an IDE dvd and cdrom devices i bought PCI/ide adapter. Havent put the driver for it yet .

The thing is that i use the old OS, ussualy i do backup of my data and put it on an external HDD and than i format the HDD and put the fresh OS with all the drivers. So i feal that it might be of a drivers conflict of somesort, ive researched forums and ppl say that mb increase the voltage for the memory becouse all slots are filled but i never touched the voltage settings so i dont know how the memory voltage even called .
Ive done tests i did use OCCT linpack for 30 mins and it was stable and fine, use my 3d graphics app's to fill all the ram and under huge lag it still worked fine and no BSOD after.
BSOD happened id say more in idle times: surfing the web in google chrome i had few unusual messages about something cannot allocate memory 3 times in 2 mins and than finaly BSOD'd. Second time i had a strange issue - no sound again after 8-10 hours of fine work, i clicked on realtek driver and it said failed to :something: the device and in... Read more

A:BSOD BugCheck 1000007E occurs time to time (not under load), need help

  
Quote: Originally Posted by MasterChief89


Hello, i just registered to this forum. I upgraded my hardware from AMD AM2+ platform to AMD AM3+, so basicly i changed my motherboard and memory( Asus M5A9, kingston 1333 4x4Gb), everything else is the same - CPU- AMD Phenom X6 1055, GPU- Gigabyte HD5830, OLD HDD (more than 3 years im sure, mb 5years) Seagate Sata 500GB. My previous system which was Gigabyte AM2+ MA790GX+Apacer 800mhz 8Gb DDR2 was fine and no BSODs ever.
Oh and becouse i have an IDE dvd and cdrom devices i bought PCI/ide adapter. Havent put the driver for it yet .

The thing is that i use the old OS, ussualy i do backup of my data and put it on an external HDD and than i format the HDD and put the fresh OS with all the drivers. So i feal that it might be of a drivers conflict of somesort, ive researched forums and ppl say that mb increase the voltage for the memory becouse all slots are filled but i never touched the voltage settings so i dont know how the memory voltage even called .
Ive done tests i did use OCCT linpack for 30 mins and it was stable and fine, use my 3d graphics app's to fill all the ram and under huge lag it still worked fine and no BSOD after.
BSOD happened id say more in idle times: surfing the web in google chrome i had few unusual messages about something cannot allocate memory 3 times in 2 mins and than finaly BSOD'd. Second time i had a strange issue - no sound again after 8-10 hours of fine work, i cli... Read more

3 more replies
Answer Match 43.68%

hey , i nid help wat shuld i do to increase fps in game(League Of Legends)my highest fps is only 21fps ...
- Operating System : Windows 7 Enterprise 32-bit
- Processor : Intel(R) Pentium(R) 4 CPU 3.40GHz (2 CPUs), ~3.4GHz
- Memory : 1024MB RAM
-Graphic Card :intel(R) Express Chipset Family
pls reply , ty ..
 

A:Suggestions to increase my PC's performance (increase fps)

First thing I would suggest is a new system, anything with a P4 in it needs to be upgraded to a new platform.
Second thing I would suggest is a dedicated graphics card, if you are using the machine for gaming.

System Requirements




Minimum System Requirements

2 GHz processor
1 GB RAM (Windows Vista and 7 users will want 2 GB of RAM or more)
2 GB available hard disk space
Shader version 2.0 capable video card
Support for DirectX v9.0c or better
Windows XP, Windows Vista, or Windows 7 (Mac OS and Linux are currently not supported)
Recommended System Requirements

3 GHz processor
2 GB of RAM (Windows Vista and 7 users will want 4 GB of RAM or more)
6 GB available hard disk space
GeForce 8800 or equivalent video card (Dedicated GPU with 512MB+ Video Memory(VRAM))
Support for DirectX v9.0c or better.
Windows XP with the latest service pack installed, Windows Vista with the latest service pack installed, or Windows 7 (Mac OS and Linux are currently not supported)
The latest update to .NET Framework from Microsoft
Click to expand...

Why are you using Windows 7 Enterprise?
 

11 more replies
Answer Match 43.68%

Hi folks I have done as much research as I possibly could before resorting to using a forum but at this point I've hit a wall. I was experiencing BSOD after about a half hour of use of my PC guaranteed the BSOD is a driver power state failure. I updated all my drivers thinking that would fix my problem unfortunately it did not it continued for a few days. I use my laptop for work so I decided to restore to system defaults. It seemed to be working fine after that until I was downloading windows updates and I blue screened same message appears Driver Power State Failure. After I reboot updating windows through the updater fails everytime. So I just restored my PC to factory once more. (BSOD once during the downloading of factory software) Anyways here is the debug file. Thanks ahead of time for looking.

A:BSOD all the time. Time to take to blue sceen anywhere from 30 mins+

Welcome.


Code:
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\YUSRA\Downloads\Compressed\debug-BenaiahPC.zip\031215-24882-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c3c0?

************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Machine Name:
Kernel base = 0xfffff800`02c10000 PsLoadedModuleList = 0xfffff800`02e54650
Debug session time: Fri Mar 13 03:05:33.547 2015 (UTC + 6:00)
System Uptime: 0 days 0:11:51.796
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
.........................
Loading User Symbols
Loading unloaded mod... Read more

1 more replies
Answer Match 43.68%

I have a problem appears from time to time. it's started after I used torrent to download. I get the blue screen , windows dumps some memory into a file and I get the following error report after it restarts:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 7a
BCP1: C0415718
BCP2: C000000E
BCP3: 148EF860
BCP4: 82AE31AF
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\100711-18018-01.dmp
C:\Users\User\AppData\Local\Temp\WER-35958-0.sysdata.xml
and sometimes appears error with this code
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: f4
BCP1: 00000003
BCP2: 87BCB598
BCP3: 87BCB704
BCP4: 82A25D60
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\100411-28392-01.dmp
C:\Users\User\AppData\Local\Temp\WER-49218-0.sysdata.xml

Laptop Sony Vaio
Model VGN-CR11GH_B
Windows 7 Starter 32bit (6.1,Build 7601)
CPU Intel core2 Duo T7100 @ 1.80GHz(2CPUs)
2GB RAM
DirectX 11

I tried to restore my system but it didn't work
Attachment 178362
Attachment 178363

A:BSOD appears from time to time after I download using torrent

  
Quote: Originally Posted by doody


I have a problem appears from time to time. it's started after I used torrent to download. I get the blue screen , windows dumps some memory into a file and I get the following error report after it restarts:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 7a
BCP1: C0415718
BCP2: C000000E
BCP3: 148EF860
BCP4: 82AE31AF
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\100711-18018-01.dmp
C:\Users\User\AppData\Local\Temp\WER-35958-0.sysdata.xml
and sometimes appears error with this code
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: f4
BCP1: 00000003
BCP2: 87BCB598
BCP3: 87BCB704
BCP4: 82A25D60
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\100411-28392-01.dmp
C:\Users\User\AppData\Local\Temp\WER-49218-0.sysdata.xml

Laptop Sony Vaio
Model VGN-CR11GH_B
Windows 7 Starter 32bit (6.1,Build 7601)
CPU Intel core2 Duo T7100 @ 1.80GHz(2CPUs)
2GB RAM
DirectX 11

I tried to restore my system but it didn't work
Attachment 178362
Attachment 178363



No DMP's included in upload. Please try this method.

W... Read more

1 more replies
Answer Match 43.26%

System Progressive Protection is a rogue security software which will report that malware has been detected on your computer in an attempt to scare you into buying this malicious software.
In reality, none of the reported issues are real, and are only used to scare you into buying System Progressive Protection and stealing your personal financial information.

As part of its self-defense mechanism,System Progressive Protection has installed a rootkit on your computer,which will disable the Windows Task Manager and will block you from running any program that could lead to its removal.

System Progressive Protection is a scam and you should ignore any alerts that this malicious software might generate.
Under no circumstance should you buy this rogue security software as this could lead to identity theft,and if you have, you should contact your credit card company and dispute the charge stating that the program is a scam and a computer virus.
Removal instructions for System Progressive Protection virus​This is a self-help guide, use at your own risk.
If you experience problems completing this guide, or the problem persists after following the instructions below or would like to have one of our staff members guide you through the process, please start a new thread in our Malware Removal Assistance forum.
STEP 1 : Start your computer in Safe Mode with Networking

Remove all floppy disks, CDs, and DVDs from your computer, and then restart your computer.

Press and hold the F... Read more

More replies
Answer Match 43.26%

Desperation is an understatement. UPto two days ago, my Inspiron 1720 with Windows Vista Home Premium pack 1, worked like magic. Then OUTLOOK hung and stopped responding, until re-launched, followed by Wndows Explorer, Task Manager failed to load, Backup/Restore page loaded but was blank, the Network/Internet wifi connection stopped working and vanished. None of the SAFE boot up versions load. On Dell's test programme it hangs at Memory Event Log Status Test. Windows Explorer can work most of the time on the basis of lottery!
Please, please help.
Kind regards,
Georgebundle

A:Progressive loss of function on Inspiron 1720

Welcome to TSF, sorry to hear your system is causing so much havoc....

Hanging at Memory Event Log Status Test and never completeing would make me suspect faulty memory. I would first remove the ram and then replace, could have had chip creep....if this does not fix the issue try Try Windows Memory Diagnostic Test
http://oca.microsoft.com/en/windiag.asp

The Windows Memory Diagnostic tests the Random Access Memory (RAM) on your computer for errors. The diagnostic includes a comprehensive set of memory tests. If you are experiencing problems while running Windows, you can use the diagnostic to determine whether the problems are caused by failing hardware, such as RAM or the memory system of your motherboard. Windows Memory Diagnostic is designed to be easy and fast. On most configurations, you can download the diagnostic, read the documentation, run the test and complete the first test pass in less than 30 minutes.


Or you can try memtest

Try one of those, please post back the results.

1 more replies
Answer Match 43.26%

Hey All,

I have the System Progressive protection Malware Issue.

I have shut down the main portion of this malware and I'm just waiting on the additional cleanup.

Thanks,
Cnon

A:I have the System Progressive protection Malware Issue

I'm clean now, would it be ok the link the guide I used?

Cnon

8 more replies
Answer Match 43.26%

I have a problem that seems to be different to most of the similar situations I've been able to google up...

I have an .avi file that shows jagged-line interlacing artifacts on playback, however it isn't an interlaced video file, it's actually a progressive one which (I assume) used to be interlaced and was poorly converted. I don't have that original interlaced file. The regular "Deinterlace" filters that various video editing programs have obviously don't work because it's a progressive video. Could these artifacts be removed by any free program? Maybe a plugin for VirtualDub?

Cheers
 

A:Progressive video showing interlace artifacts

bump
 

2 more replies
Answer Match 43.26%

Had System progressive protection malware
ran Rkill, malwarebytes, and PSIS. Now I am getting a message that says

The Recycle Bin on C:\ is corrupted. Do you want to empty the Recycle Bin for this drive?

I said yes at first and when it said there were over 700 files I stopped it. Rebooted and got it again, this time I said no and tried to open the Recycle bin to view the files and it wouldnt let me.

Any suggestions????

Thanks,

A:malwarebytes removed system progressive protection

Hello,I will be helping you with your problems. Please be patient while I assist you.Some points for you to keep in mind while I am helping you to make things go easier and faster for both of us Please do NOT run, install or uninstall any programs, unless instructed to do so.
We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability. Please do not attach logs or use code boxes, just copy and paste the text.
Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post. Please read every post completely before doing anything.
Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process. Please provide feedback about your experience as we go.
A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At the top of your post, click on the Watch Topic Butt... Read more

1 more replies
Answer Match 43.26%

HelloI have a Sonay Vaio running Vista 32bitI had the System Progressive Protection on my laptop and ran rkill and MBAM and cleaned it.After that i lost use of my laptops keyboard and mouse but the USB keyboard/mouse work.I tried many thing with no success and have now restored all the files found by MBAM and now back to square one and realize i'm in over my head and need some help.Windows Update will not run as well as other servicesMS Security Essentials was on it but was getting errors so i uninstalled itMy Recylc Bin says it's corrupted as well.Here is the log from my most recent Rkill being ran in safemode and MBAMPlease Help!Rkill 2.4.3 by Lawrence Abrams (Grinler)http://www.bleepingcomputer.com/Copyright 2008-2012 BleepingComputer.comMore Information about Rkill can be found at this link: http://www.bleepingcomputer.com/forums/topic308364.htmlProgram started at: 10/01/2012 08:46:02 PM in x86 mode.Windows Version: Windows Vista ™ Home Premium Service Pack 2Checking for Windows services to stop: * No malware services found to stop.Checking for processes to terminate: * No malware processes found to kill.Checking Registry for malware related settings: * No issues found in the Registry.Resetting .EXE, .COM, & .BAT associations in the Windows Registry.Performing miscellaneous checks: * ALERT: ZEROACCESS rootkit symptoms found! * HKEY_CLASSES_ROOT\CLSID\{5839FCA9-774D-42A1-ACDA-D6A79037F57F}\InprocServer32 [ZA Reg Hijack] * HKE... Read more

A:Zeroaccess Rootkit and System Progressive Protection

Greetings and Welcome to The Forums!!My name is Gringo and I'll be glad to help you with your computer problems. I have put together somethings for you to keep in mind while I am helping you to make things go easier and faster for both of usPlease do not run any tools unless instructed to do so.
We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability.Please do not attach logs or use code boxes, just copy and paste the text.
Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post.Please read every post completely before doing anything.
Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process.Please provide feedback about your experience as we go.
A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At... Read more

22 more replies
Answer Match 43.26%

Dell laptop, windows 7. Progressive protection virus shows up. It only had about 20 minutes to get the infection started when the computer came to me. Could not get programs to open. I started in safe mode. Did a system restore. Scanned with MSSE. All looks good. Is it gone or will it come back ?? I can get MWB on it tomorrow, if needed.
THANKS

A:[SOLVED] progressive protection virus windows 7

I just scanned with MWB. All clean. Must have gotten lucky, thats a nasty virus.

5 more replies
Answer Match 43.26%

I've already started the process with tetonbob through PM since my system wouldn't allow me to create a thread. I'll just post everything here in order, if it works.

A:Search Redirect Malware and progressive errors

Here is my initial problem with first step files.





Whenever I click on search results from different engines, some of the results will redirect me to things I don't want. I will do it many times before giving me the site I want. In the past, it would redirect via tru01.... now it is qo1q... or something. Mostly it sends me to sites of ......com/search with a favicon that is a stylish blue/green looped 2. On rare occasions, while the browser is open for a while, it will create a new window popup with different addresses like directdr with a green lon/lat atlas favicon.

I did have norton internet on the system but it has expired so I removed it. I've run malware bytes, spybot, superanti-spyware, ccleaner and avast. They sometimes found things but it never fixed the issue. Avast's active protection blocks somethings from time to time but doesn't stop all of it. The problem occurs on both firefox and IE, I don't use IE much but at one point my firefox stopped working. Chrome opens but won't load any sites. Superanti, ccleaner, and avast were all loaded after infection. Sometimes I get "General Host Process Win32" or something errors followed by the window and task bar style going plain brown. My volume controls don't work anymore. Sometimes one of my svchost.exe processes will spike to 99% and stick for a while. Java and Adobe have both been updated recently. In extreme instances, the computer slows to a halt and won't load anything and won't shut down with... Read more

15 more replies
Answer Match 42.84%

Hi all,

The other day I turned on to find malware on my computer - a fake antivirus called System Progressive Protection.

I have since:

- deleted the files from their origin folders
- ran the computer in safe mode
- run Rkill
- run malware bytes (having first updated)
- run hitman
- deleted all cookies and temporary internet files
- emptied my recycle bin

When I boot my computer in normal mode I get the message:

"recycle bin is corrupted" and I think it then asks if I want to empty it.

System progressive protection seems to have gone but i still have internet re-routing malware going - seekportal and doublee-click.net for example. These won't go no matter what I do.

In my task manager processes, something called atieclxx.exe is running, which I've read could be malware.

When I go back into safe mode and run malwarebytes, it doesn't pick anything up.

If somebody could please help me, then I'd be hugely appreciative.

Thanks,

Trevor

A:System Progressive Protection, Seekportal, Doublee-click.net

Oh, I've also made sure that in my LAN settings I do not have ticked "use a proxy server".

23 more replies
Answer Match 42.84%

Hello,

I`m having an BSOD error, and it also refuses to write a minidump and kerneldump.
So I can`t use any analysis tools. And yes, it`s enabled!

Stop message:
*** STOP: 0x00000F4 (0x0000000000000003, 0xFFFFFA800F209B30, 0xFFFFFA800F209E10, 0xFFFFF80003787240)

After restart it sometimes does not find the primary harddrive.

The error pops up from time to time. Sometimes from browsing the web, downloading or playing a game. It even pops up while I`m not doing anything at all.

I did a checkdisk and it turned out clean.


Regards,
ExibeR

A:BSOD - STOP: 0x000000F4 from time to time

Hello Exi and welcome to Sevenforums.

I did not find any crashdumps. Make sure they're enabled.





Quote:
To ensure minidumps are enabled:

* Press Start, in the Search Box type: "sysdm.cpl" (without the quotes), press Enter.
* Select the Advanced tab, click on Startup and Recovery Settings.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information headline select Small memory dump (256 kB) in the dropdown box.
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK till you're out of the dialogue.
* Reboot if changes have been made.


Copy all the content from %systemroot%\Minidump, zip it all, and upload it.

Best Regards,
Frederik.

2 more replies
Answer Match 42.84%

Hello all,

I have a problem when playing certain games- I get crash caused by atikmpag.sys. Before that I had problem with atikmdag.sys. Sometimes I can play few days without crash, sometimes i get a crash. For example, in gta 4 i get a crash after 2mins.

GPU is MSI 6850 OC 1GB
What I tried:
-SFCSCAN -passed
-Fresh and updated windows 10 installed
-Tried with latest catalyst drivers and with beta crimson drivers. *(Didn't tried with drivers that Windows 10 has to offer)*
- Downloaded SEAGATE tool for testing HDD. All short and long tests passed. No bad sectors.
- GPU tested in Furmark
- PSU has enough watts and amperage.
-Temperature of gpu is 75 max when playing games at full load.
-Crashes happening with a stock CPU and overclocked , no difference.
-Tried with EXTRACT atikmpag.sy_ method...
-I run windows memory diagnostic and memorytest from windows, all good.
-I run Intel burn stress test-system is stable

When I run driver verifier, I got that 3 drivers are not verified- atikmpag.sys, atikmdag.sys and some atihd...something. Now i get update for Audio Device AMD and its verified. Still first two left unverified.
Im using Avast antivirus program. Now I will put exclusion for drivers folder, just to be sure.

More replies
Answer Match 42.84%

Hello,

Recently (about a week ago) I have been getting the BSOD for no known reason whenever I browse the web for 20-30 mins or play any video game (Minecraft, for instance). I have done anything and everything i can do (run memcheck, re-install windows, set computer to factory deafults etc. etc.) But nothing helps; whatsmore, no errors were detected during any hardware checks.

Here are the BSOD details:

Bug Check String: ATTEMPTED_WRITE_TO_READONLY_MEMORY
Bug Check Code: 0x000000be
Parameter 1: ffffffff`fffe00b0
Parameter 2: 00000000`fee0017b
Parameter 3: fffff880`02f8b960
Parameter 4: 00000000`0000000a
Caused By Driver: CLASSPNP.SYS
Cause By Address: CLASSPNP.SYS+1c27
Crash Adress: ntoskrnl.exe+7f1c0
Full Path: C:\Windows\Minidump\052812-23446-01.dmp
Dump File Size: 291,400

And here are my PC's Specs/Hardware:

Processor: AMD Athlon II x4 640
Installed Memory RAM: 4.00 GB (I don't know what manufacturer or model)
Motherboard: BIOSTAR GF8200E
Graphics Card: NVIDIA GeForce 8200
DiskDrive: Hitachi HDS721050CLA362

I have attached the dump file to the thread.

Could someone please explain what the heck is wrong with my computer and how to fix it, thank you.

Krissto

A:[SOLVED] Unknown BSOD from time to time

Hi Welcome to TSF


Quote:




Image name: amdppm.sys
Timestamp: Mon Jul 13 16:19:25 2009 (4A5BC0FD)




Driver Reference Table - amdppm.sys

Looking at the dump file u provided it seems like you need windows updates
make sure to check windows updates and install them all
If BSOD occurs again post the dump file here with all the other required files in the article below
http://www.techsupportforum.com/foru...ta-452654.html

10 more replies
Answer Match 42.84%

Hello,

I have here two Lenovo Yoga 2 13 which initialy run with Windows 8.1. After the Windows 10 Upgrade this two laptops starts to throw the BSOD 133. There is no way to replicate the BSOD. The two laptops can work for a week without the BSOD and the next week the BSOD 133 happens every second day and after this it works again for a few days. It happens when the laptop is in use or when it just stand there - I didn't see any thing which is always the same so I could say this triggers the BSOD.
I made a clean install (removed everything - partitions and so on) of Windows 10 Home on one of this two Yogas. But the bluescreen wasn't fixed. Same like before. Bluescreenview tells me always the same drivers: igdkmd64.sys or hal.dll or hdaudbus.sys and always ntoskrnl.exe. I updated the sound and gfx driver and tweaked the energy settings but nothing what I try helps. Did I miss something in the minidump files and another driver is the problem?

Thank you
Thomas

More replies
Answer Match 42.84%

Hi guys,
I need help.I am getting BSOD every time i turn on my laptop(windows 8.1).That started to happen when i upgraded from windows 7 to 8.1.One day it would say MEMORY_MANAGMENT, other day it would say KERNEL_SEQUIRITY_CHECK_FAILURE. Then it automatically restars and then working fine.I have no idea what to do.Please help!

A:BSOD every time I turn on my laptop for first time

Zip file is empty, Please zip the files again and upload.

68 more replies
Answer Match 42.84%

This is a problem that is driving me crazy. I am gettig the dreaded bsod 5 to 8 times a day but for no apparent reason: no programs are running strangely and all the common functions seem to be working o.k.. It must be said that I am not very computer savy but I have tried the various help tips in the help section and even have removed a couple of programs that I thought might have been causing problems.
I?m running 7,1 on a HP DV6, 2.2gb intel 7, quad core, 8gb ram, 1tb hd.and have about 90 additional programs installed. Any ideas greatly appreciated.

A:bsod time after time for no apparent reason

Before posting a BSOD thread, please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

If you need to add new information like the dump files, please make a new post in your initial BSOD thread. Please do not make an extra new thread.

7 more replies
Answer Match 42.84%

BSOD many different causes over time

Lately just been having trouble plugging iphone in but computer has not been great for a while now im using an old IDE harddrive atm due to bluescreen happening when i have OS installed on a SATA drive i have tried different SATA leads and different sata power leads. I have tried downgrading and updating bios to no avail

whenever i have a another SATA drive connected my drive sounds like it is spinning down very unusual noise then 50% of time it will bluescreen after hearing spinning down noise. currently i have IDE with OS on win7 32bit currently and another 2TB harddrive just with alot of data on nothing running from it just files. that drive always seems fine even though its a SATA drive whenever i run an OS from SATA drive though seems to crash.

Any light you can shed on this would be appreciated i will attach the files created from dump.

A:BSOD many different causes over time this time plugging iphone in

Update your USB 3.0 Driver

Click link below

https://www.asus.com/support/Download/1/32/P7P55D-E/29/

Click on the + sign next to USB click on Global to download
Please take a look at this link and post the log with your reply.

Windows Genuine and Activation Issue Posting Instructions

3 more replies
Answer Match 41.58%

My computer has me extremely frustrated!! There are several updates that have failed to update over the last several months, and I can find no methods to troubleshoot these errors. Also, each time I try to install Quick Time, the installation fails to install properly!! Please help!!!

A:Won't install updates, won't install Quick Time!!

question is there more then 1 user account on the computer and if so the one you are using to download the updates is the one with admin rights.

3 more replies
Answer Match 41.58%

First of all - thank you for your dedication to people like me!
I followed the removal instructions but then has a black screen when restarting my computer. Computer woks in safe mode.
I have done a Windows startup repair but it cannot be completed, I get the message that unspecified changes to system configuration might have caused the problem. Error code 0x490.
Also get Boot/BCD failed.
I have restored the computer and can work on it in normal mode. I still see the little lock of the Malware on my taskbar.
I have also purchased Advanced System Care to assist but I get no joy...
It seems like removal of the Malware also removes some system registry files but I am no expert.

Please, please help me!

A:Uninstall of System Progressive Protection Malware creates registery files problems

Please do the following:Please download DDS from either of these linksLINK 1 LINK 2and save it to your desktop.Disable any script blocking protection Double click dds to run the tool. When done, two DDS.txt's will open. Save both reports to your desktop.---------------------------------------------------Please include the contents of the following in your next reply:DDS.txtAttach.txt. NEXTPlease download aswMBR to your desktop.Double click the aswMBR.exe icon to run itWhen asked if you want to download Avast's virus definitions please select Yes.Click the Scan button to start the scanOn completion of the scan, click the save log button, save it to your desktop and post it in your next reply.You will also notice another file created on the desktop named MBR.dat. Right click that file and select Send To>Compressed (zipped) file. Attach that zipped file in your next reply as well

40 more replies
Answer Match 41.16%

im getting BSOD from time to time, i dont know what causes it

here is what i got from 'bluescreenview'

081615-38282-01.dmp 8/16/2015 7:36:58 PM
0x0000010d
00000000`00000005
00000000`00000000
00000000`00001202
fffffa80`0ba4a180
Wdf01000.sys
Wdf01000.sys+52a46
x64 ntoskrnl.exe+735c0
C:\Windows\Minidump\081615-38282-01.dmp
8
15
7601
386,217
8/16/2015 7:37:44 PM

A:im getting BSOD from time to time, i dont know what causes it

==================================================
Dump File : 081615-25880-01.dmp
Crash Time : 8/16/2015 8:57:25 PM
Bug Check String :
Bug Check Code : 0x0000010d
Parameter 1 : 00000000`00000005
Parameter 2 : 00000000`00000000
Parameter 3 : 00000000`00001202
Parameter 4 : fffffa80`07be5b20
Caused By Driver : Wdf01000.sys
Caused By Address : Wdf01000.sys+52a46
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+735c0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\081615-25880-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 7601
Dump File Size : 384,497
Dump File Time : 8/16/2015 8:58:59 PM
==================================================

==================================================
Dump File : 081615-38282-01.dmp
Crash Time : 8/16/2015 7:36:58 PM
Bug Check String :
Bug Check Code : 0x0000010d
Parameter 1 : 00000000`00000005
Parameter 2 : 00000000`00000000
Parameter 3 : 00000000`00001202
Parameter 4 : fffffa80`0ba4a180
Caused By Driver : Wdf01000.sys
Caused By Address : Wdf01000.sys+52a46
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+735c0
Stack Address 1 :
Stack Address 2 :
Stack Addre... Read more

1 more replies
Answer Match 41.16%

Hi,
I have problem with my new computer, random BSODs from time to time,
please help
Thanks!

A:From time to time BSOD screens, please help

Code:
BugCheck 19, {3, fffff8a008a07880, fffff8a00c394bc0, fffff8a008a07880}

Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+cbb )

Code:
Usual causes: Device driver
This can also be caused by RAM or hard-drive corruption.

The header for the pool allocation has become corrupted, each header also has a pool tag which describes the purpose of the allocation. There seems to be problems with how Windows is allocating memory to drivers.

More specifically, the pool freelist has become corrupted, indicated by parameter 3 in blue, the freelist is a data structure used by Windows for memory allocation, it works by freeing region by linking it to the free list, and then allocation memory by removing it from the free list and then using it.

What To Do -

Run Driver Verifier to scan for any corrupted drivers which may be causing problems, this program works by running various stress tests on drivers, in order to produce a BSOD which will locate the driver; run for least 24 hours:Driver Verifier - Enable and Disable


   Information
Additional Help - Using Driver Verifier to identify issues with Drivers

Install and perform full scans with:Malwarebytes : Free anti-malware download
Microsoft Security Essentials | Protect against viruses, spyware, and other malware


   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweig... Read more

3 more replies
Answer Match 41.16%

I get a blue screen from time to time but when it does it the fan of the CPU speeds up a considerable amount. It has been happening since September a month after i bought the computer, I sent it back and they found a fault with the RAM so they changed it but I've still been getting a Blue Screen. Please Help.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: d1
BCP1: FFFFFA8C0CD2D818
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF8800746EE34
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\090512-15600-01.dmp
C:\Users\user\AppData\Local\Temp\WER-20061-0.sysdata.xml

A:BSOD from time to time then restarts.

I need more than the dump files: http://www.sevenforums.com/crashes-d...tructions.html

Thanks

5 more replies
Answer Match 41.16%

I have no idea what to do, I'm not so good with computers so I figured out I could get help from here!
PS. My PC BSOD's regardless what I'm doing.

A:Computer BSOD from time to time regardless what I'm doing

Can you uninstall AVG using its removal tool from here
Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Just keep MSE and tell us if you keep getting BSODs.

7 more replies
Answer Match 41.16%

BSOD happening randomly, even when i am idle would happen. i tried to do the verifier to get more data but end up cant start the computer. ill try to get more info as this goes, let me know what else i need to do

A:BSOD happen from time to time

Hello Automanuel, I'll see if I can help with this. After checking most of your dump files it appears that they are all the same.


Code:
fffff880`0c0c0358 fffff880`0595ce85Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x67e85
Which is your graphics driver. This is the information on the driver


Code:
nvlddmkm
start end module name
fffff880`05806000 fffff880`06211000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Fri Mar 13 10:39:56 2015 (550304CC)
CheckSum: 009CE879
ImageSize: 00A0B000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
It appears the driver is pretty current. What I would like you to do is reinstall the driver using this method
NVIDIA Drivers - Avoid Problems . See if that helps.

I also noticed that you have received a considerable number of errors from Honor Buddy Launcher. I would suggest you try whatever you need to do to fix those errors. Perhaps there is a WOW Forum that can help or uninstall it.

I would also like you to keep a close watch on your CPU and GPU temps and let me know what they are running during gaming,

5 more replies
Answer Match 39.9%

Hi Guys,
I am new to the forum,
My Pc started crashing recently after my old PSU(600w) busted and i replaced it(400w),The funny part about the bsod's is i get different codes each time....eg (d1 then a then 3b..etc) at first i thought it was maybe a virus... so I formatted The PC and then installed the latest drivers i could find for my PC...The results were only slightly different from the past (The computer would stay up a little longer before it crashed), I ran a memtest and RAM is fine, Then I thought it was my GPU overheating....So i cleaned the fans of both GPU and processor and Replaced the Old Thermal Compound.....Still no improvement... and here I am Now


My Specs:-
Motherboard:- Asustek P5Q Se
CPU:- Intel Core 2 Quad Q8300 Yorkfield
Socket :- LGA 775
GPU:- Nvidia GTX 460 2GB (ZOTAC)
RAM:- 2x2GB DDR2
HDD:-Seagate Barracuda 500gb

A:Random BSOD's while gaming and surfing web(BSOD Codes vary each time)

Code:
Host Name: TKMOHAMMED-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: TK Mohammed
Registered Organization:
Product ID: 00426-OEM-8992662-00497
Original Install Date: 4/17/2015, 1:19:57 AM
System Boot Time: 4/20/2015, 12:59:14 PM
System Manufacturer: System manufacturer
System Model: P5Q SE
Counterfeit installations such as yours contains heavily modified code that causes the installation to behave it unexpected ways. Analysing BSOD's and determining their causes on these sorts of installations is very unreliable.

My recommendation is to start with a clean slate, and install a genuine version of Windows. This will minimise the problems you are experiencing, and make subsequent diagnosis of BSOD's far more reliable.

1 more replies