Tech Problem Aggregator

BSOD after installing NVidia updates and other driver updates

Q: BSOD after installing NVidia updates and other driver updates

Hello,

I am hoping someone can provide some assistance in getting rid of this BSOD problem.

Here is what happened.

I was using two driver update programs: One called Driver Booster 2 by Iobit and the other called Slimdrivers.

I updated various drivers including Nvidia which I had previously uninstalled but it kept popping up so I just let it go. The next thing I know, after that is installed and there were no more drivers left to install, I ran Windows Update and it also wanted to installed Nvidia again. I didn't have much choice in the matter...before I knew it, it was installing and I had to restart my computer. When the computer turned on again, I used it for a little while then it started to overheat something terrible. The computer was so hot I thought it was going to start on fire. Almost as soon as it started overheating, I got the BSOD and within a second it restarted or shut down. I can't remember which. The fan was running at top speed but that still wasn't enough. I could have cooked an egg on the backside of this thing.

So the next day, I started the computer up again and I uninstalled Nvidia completely using Iobit's Uninstaller to remove all traces of it in my computer. But the other problem I have now is that it still runs dangerously hot within a few hours.

I've uploaded the zip file as per the instructions. There must be some kind of conflict going on.

Any help is greatly appreciated!

A: BSOD after installing NVidia updates and other driver updates

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Dont run any disc cleanup program before you upload another zip.

1 more replies
Answer Match 99.54%

Hi

I installed 285.62 P08 Nvidia Driver from the Dell webpage two days ago and it was fine and everything was good after the restart from the installation. After finishing up my session, i noticed that there is a window update so i shut down and left the computer to do the updating on it's own.

Today, I switched on my computer to look at my timetable for today and after that put it to sleep mode. After "waking" it up, I was met with a BSOD after like 5 minutes of use. I then decided to system restore to before i did the updates. It still BSOD albeit it took a longer time before that happened. Right now im using Safe mode + Networking to type this message out. (The computer does not seem to BSOD in safe mode so far)

I did the steps listed but i could not get the perfmon step working. "An error occured while attempting to generate the report"

Specs:
Windows 7 64bit
OEM
About 7 months old both hardware and the OS

Update: I triggered a BSOD in normal mode so as to provide you guys with the Error Codes.

KERNEL_DATA_INPAGE_ERROR
STOP: 0x0000007A (0x0000000000000020, 0xFFFFFFFFC000009D, 0xFFFFFA800798E078, 0x0000000000000000)
Physical Memory Dump FAILED with status 0xC000009C

I would appreciate the help given. THANKS!

A:BSOD after installing Nvidia Drivers + Windows Updates.

> Your difficulties were caused by the driver for Bigfoot Networks Bandwidth Control.
Uninstall if not needed.

> I also note you have McAfee.
McAfee is a frequent cause of BSOD's.
Please remove and replace it with Microsoft Security Essentials AT LEAST TO TEST!

http://download.mcafee.com/products/...tches/MCPR.exe

Microsoft Security Essentials - Free Antivirus for Windows

3 more replies
Answer Match 97.02%

Problems started earlier in the month when updating my NVidia drivers. Computer worked for the last few weeks but would get random display errors. I attempted to revert to previous drivers however it did not fix the problem. 2 days ago, computer started crashing and will now only boot in safemode. I attempted a restore prior to the NVidia install, but the restore point was not available for that time period.

I've also uninstalled/reinstalled the video card and windows automatically installs the drivers.

I uploaded the zip file per instructions.

Thanks in advance,
Joe

A:BSOD after nvidia driver updates - computer will only boot in safemode

Boot in safe mode and Install the NVIDIA DRIVERS 314.22WHQL only as described.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Boot normally now. Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Does it do any better? Let us know.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {10, 2, 1, fffff80002ec9f1f}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+e08fc )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* ... Read more

7 more replies
Answer Match 85.68%

I am fairly new to Vista and do not know much about the internal systems so I am a bit in the dark. Was using Windows movie maker and my system crashed without warning. Upon rebooting it did it twice more and the windows on screen are not displaying properly. The error message says.

This problem was caused by NVIDIA Graphics Driver, which was created by NVIDIA Corporation. There is no solution for this problem at this time.
A driver update, if available, might prevent this problem from recurring.



Upon searching in my browser there are several comments about NVIFIA drivers causing problems to the system and I am unsure what to do about the problem. I do not want my computer to keep crashing or cause further problems by installing updates...................Help!!!

A:NVIDIA Graphics Driver updates

Hi Ellie,

Try installing new drivers :

GeForce Forceware 180.43 Vista 32-bit download from Guru3D.com
GeForce Forceware 180.43 Vista 64-bit download from Guru3D.com

You need to choose the right driver for your system

Hope this helps

Pooch

4 more replies
Answer Match 85.68%

I am trying to find a site that will allow me to download the latest drivers for my graphics card - a rather ageing Nvidia geforce2 400.

I have been directed to the Nvideo site but for some reason I am not able to download anything. All I get is an unable to contact host message

Any ideas where I can download this from?

Thanks
 

A:Where can I find Nvidia driver updates?

Have you tried here
http://www.nvidia.com/content/drivers/drivers.asp
 

3 more replies
Answer Match 84.84%

I am constantly getting this message (Kindly , see the attached Picture) upon opening my Nvidia Gforce Experience software.

I have bought my ASSEMBLED RIG on the 5th of Feb 2015.The specs are as follows.

Intel Core i7-4790 CPU @ 3.60GHz 3.60GHz
16 GB RAM
Nvidia Gforce GTX 960 2 GB Graphics Card
Manufacturer > GIGABYTE

Now,games such as Metal Gear Solid Ground Zeros are working with 60 frames per second while using fraps ( i am not very knowledgeable in this area , but the frames don't remain steady on 60,they keep decreasing slightly but return back to 60) All in all , a smooth game play.

Do i really need to update and download this Driver Update via Gforce Nvidia Expeerience.Even if i do so by making sure that i check the DO A CLEAN INSTALL check box,what else do i need to do. Because i have read forums of people doing some PRIOR uninstalling via control panel & even doing some stuff in Windows Safe Mode and further deleting some files from the NVIDIA FOLDER.

I am so confused and TEMPTED to see this message of NEW GAME READY DRIVER/OR NEW RELEASE HIGHLIGHTS is ready for installation/update from Nvidia Gforce Experience...I do not want to cause any crashes such as NVIDIA DRIVER FAILED TO INSTALL or similar...What shall i do ?

A:Driver Updates via Nvidia Gforce Experience

Some people like to do a clean install every time. I do express updates and go the clean route only if there are problems. You don't have to update any drivers if you are happy with the current ones. New drivers are more important with newer cards where drivers do give improvements and bug fixes. You should be able to disable auto-driver checking somewhere in preferences.

Edit: Preferences tab - Under Updates - uncheck both boxes. Also uncheck Beta updates too.

6 more replies
Answer Match 84.84%

Hello. I have been having some issues with my PC for a while. Certain programs can never seem to install on my Vista 64bit Service Pack 2 Home Premium OEM system. Examples of such programs are recent versions of Nvidia's drivers (and the Nvidia control panel on those older drivers that do install) and the Unreal Tournament Physx map pack addon. I am wondering what can cause such programs to fail from installing. I have started to think that it is that I only have .NET Frame Work 1.1 installed. So I have tried to update to .NET Frame Work 3.5, 2.0, ect. but they all seem to fail to install as well. So I am wondering what is likely the issue here, and what can be done to fix it? Does it sound like the Vista install shield (program, or whatever it is called) is corrupted? Do note that the vast majority of programs install just fine. But there are some that can't. If anyone can help me, I would really appreciate it.

A:.NET Framework installation, Nvidia driver updates

Are you sure that you are using 64-bit installs?

5 more replies
Answer Match 81.48%

get this message: updates not configured correctly, reverting changes.

stuck in a loop, keeps trying to start but wont. safe mode didnt load/work, neither did last known configuration.

any ideas how to get this to boot/work again?

update: trying repair from the install dvd. see if that works.

A:wont boot after installing updates. updates not configured correctly reverting change

Startup repair from the dvd did not work.

I did use this registry defrag program. wonder if that did something to the registry?

Free Registry Defrag

I generally avoid registry cleaning programs because I don't trust them. thought id try it once to see what happened. not sure if this caused the startup issue or something with the windows updates I installed caused it. I did do several restore points. would that help me fix the issue?

2 more replies
Answer Match 80.64%

Error installing driver updates

Open Gateway site map. Click on “My Down loads” under “Drivers and Downloads”. A page opens up and I select my operating system – Windows XP. A page opens up showing 10 or 12 driver updates. I click on the first one and a page opens up showing buttons for download instructions and install instructions. I download the first update to my desk top and an icon shows up there. I click on it nothing happens or I get an error message.

C:\Cabs\d20003-003 refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Check to make sure that the disk is properly installed, or that you are connected to the Internet or your
Network, and then try again. If it still cannot be located, the information might have been moved to a different location.

I intrepid this as meaning some files were missing so I ran Scannow and it didn’t find anything wrong

If some one can help it would be greatly appreciated.

Thank you.

Jim
 

A:error installing driver updates

C:\Cabs is the default folder where Gateway drivers extract to when you unzip them. It has nothing to do with Windows, that is why scannow didn't find anything. Either the driver installer is expecting the folder to already be there, or is unable to create it. Do you have problems installing any other software on the C drive?
 

3 more replies
Answer Match 80.64%

Hello Tech Guys,
I was wondering if someone would know how to install a video driver to its proper location. What I mean is I don’t know where it goes. I was given a CD with the update for the 3D Blaster Banshee PCI/AGP video card, and I installed it to the desktop and thought I would find a file called Setup, that automatically puts it in the right place for me, but there was nothing of the sort. So where does it go from there? All I have is a desktop full of icons that mean nothing to me. Does it go to something called DXDIAG.EXE, which takes me to DirectX Diagnostic Tools. Because I can see the driver under display but no way to update it. Now the reason I need to do this is because I am reformatting the hard drive. The current driver that comes with the card does not work correctly. It only gives me 16 colours instead of 32 bit, but with the update my nephew gave me it gives me 32 bit. Now I went to Device Manager to see if I can do it that way (before I start the reformat) but because it already is installed I can’t do it, I don’t know if its because its already installed or because it’s the wrong way. Does anyone know what the right thing to do is?
Please help me.
Gasper [email protected]
 

A:Installing Video Driver updates?

Create a folder on your desktop or somewhere on the drive, move the .exe file into the folder you just created, now run the file and decompress the drivers.

Once that's done go to start/settings/control panel/display/settings/advanced button, adapter, change, follow the prompts until you see the checkbox for show compatible, check it, go to the left hand frame, scroll all the way to the top, choose standard vga drivers, hit okay, reboot.
Once rebooted go to the same place follow the prompts until you see the have disk button, click it, browse to the folder you decompress the drivers to, select the .inf file, hit okay. this should install your drivers. Once done it will promt you to reboot, everything should be good to go after you reboot.

You can delete the driver folder if you like, or save to hard drive incase you need to reinstall the drivers.

Hope this helps
 

1 more replies
Answer Match 78.96%

Hi there

We got the crashed on machine running on Windows 10 started on last Wednesday and it's been working well for almost 1 month. After troubleshooting and restoring, we came across it's something to do with the Intel Drivers Display update that might causing this.

Once we restored the machine, the Windows Updates has already listed the driver ready to install as well all KBs. My question how do I stop/clear this list from running?

To prevent this update automatically on the driver, I went to the System > Hardware tab > Device Installation Settings > No. However this only preventing it running in the future and I need to stop appearing from the list as stated previously.

I came across previously with Windows 7 which is relating on one of particular updates that causing stuck on Windows Updates ... I know there is away to stop this action and clear up this updates cataloq. But not sure on Windows 10.

I'm appreciated your feedback and comment.

Thanks

A:How to cancel the Windows Updates in relation to driver updates?

Have a look at this tutorial
Windows Update Automatic Updates - Enable or Disable in Windows 10

Go to Options Three
To Turn On or Off Automatic Device Driver Installation

2 more replies
Answer Match 78.54%

My last successful update check was September 11, 2012. Some updates installed successfully, others failed. The failed ones were:

Update for Windows 7 (KB2719857) Recommended
Update for Windows 7 (KB2735855) Important
Update for Windows 7 (KB2741355) Recommended

Windows Update now says, "Restart your computer to install important updates." When I do, the computer shuts down, saying "Preparing to configure updates..." When it restarts, it says, "Configuring updates...100% completed..." then restarts again. Upon reaching the welcome screen this time, it says "Failed to configure updates...reverting changes...Welcome" and returns me to my desktop. At this point, when I try to manually check for new updates (or if I just leave Windows Update alone until it checks itself), Windows Update tells me "Restart your computer to install important updates," and the process loops again, so I cannot check for updates.

Things I have tried:
-FixIt (MicrosoftFixit.wu.LB.137271463094452760.1.1.Run)
-Manually installing the failed updates (each one tells me that "The update is not applicable to your computer")
-Startup repair (though, I'm having no problems starting up)
-Rebooting in safe mode, then restarting
-Disabling F-Secure firewall and antivirus
-System Restore to a point before these updates were attempted (this resulted in a message saying that System Restore failed, but at the same time, System Restore also presents m... Read more

A:Cannot Complete Installing Updates, or Check for New Updates

There are a few hundred MS Fixits - which one have you used?

9 more replies
Answer Match 78.54%

I seen that someone else had this same problem in here so I copied and pasted this problem here in my own Thread cause I'm having the same problem, but seems that I couldn't use the help that was giving to that user cause it was for that user only.

Windows Update now says, "Restart your computer to install important updates." When I do, the computer shuts down, saying "Preparing to configure updates..." When it restarts, it says, "Configuring updates...100% completed..." then restarts again. Upon reaching the welcome screen this time, it says "Failed to configure updates...reverting changes...Welcome" and returns me to my desktop. At this point, when I try to manually check for new updates (or if I just leave Windows Update alone until it checks itself), Windows Update tells me "Restart your computer to install important updates," and the process loops again, so I cannot check for updates.



Report- Windows 7 Please Help.zip

If you do not want to download the report here it is..


Code:

Advanced SystemCare Diagnose Report v1.0
Date: 2012/10/23 11:41:44

----------------------------------
01 - Operating System
----------------------------------

0101 - Operating System : Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120830-0333)
0102 - Language : English (Regional Setting: English)
0103 - BIOS : BIOS Date: 09/23/09 11:58:43 Ver: 08.00.10
0104 - Processor : Intel(R) Core(TM) i3... Read more

A:Cannot Complete Installing Updates, or Check for New Updates HELP

Hello dlolley and welcome to Seven Forums.

According to the Advanced SystemCare diagnose report you provided there seems to be a problem with something called Tuneup 2012 or Tuneup Utilities. I'm not sure if this is a different product from Advanced SystemCare that generated your report or if Tuneup 2012 is a part of Advanced SystemCare. In any case, these tuneup utilities can cause major damage to operating system files, the registry, etc. I would suggest uninstalling them. Windows 7 isn't like XP which required constant tweaking to work right.

Then I would run a full anti-virus scan with your installed anti-malware suite. No anti-malware product is 100% effective 100% of the time. If there was such a thing we'd all be using it. So after running that scan I would follow up with some additional scans using these free tools. Don't forget to update the data bases before running the scans.:

Malwarebytes

ESET Online Scanner

Windows Defender Offline

If the scans come back clean you could try rolling back your computer to a date/time prior to the update problems using system restore. I would also run a system file checker scan from an elevated command prompt (option two.) If problems are found, run the scan 3 times and reboot the computer after each scan.

System Restore

SFC /SCANNOW Command - System File Checker

When you're finished with the above you can try installing the updates again. Do not use the automatic update setting. Use the setting called Never Check... Read more

3 more replies
Answer Match 77.7%

After installing Windows Updates, I now sometimes get the BSOD while scrolling an open web page in IE-11 or FF-26.0. Not always. Sometimes.

The error message is






Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8006C33038
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\011714-54771-01.dmp
C:\temp\WER-88062-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


Recent Windows Update files are listed in Update History jpg attached.

I tried to attach the zipx file for the SF BSOD tool report, created by WinZip 17.5, but SF gave me an error msg saying that file type isn't accepted. So I redid it as a Zip file via 7-Zip and I hope that's okay.

I'm mystified by all this. Please help.

A:BSOD after installing MS Updates

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8006b028f8, 0, 0}

Probably caused by : hardware

Followup: MachineOwner
---------
Hi Florida Rene. How old the computer is? Let us know, as it may be the most vital information here.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Let us know the results.

9 more replies
Answer Match 77.7%

Hey just to say first I just got my windows updater working again and when I shutdown to install all the new windows updates my computer BSODs when its installing 1 of 39 updates. Help please

OS - Vista/ Windows 7 ? Vista
? x86 (32-bit) or x64 ? x64 bit
? What was original installed OS on system? Vista
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Got it off Friend
? Age of system (hardware) 1 year
? Age of OS installation - have you re-installed the OS? 1 year no reinstall
? CPU Intel iCore i7 920 @2.67Ghz
? Video Card ATI Radeon 4890 I GB
? MotherBoard Gigabyte EX58-UD3R
? Power Supply - brand & wattage Corsair 650 watt

Thanks!

A:BSOD when installing updates

Check your RAM with memtest86+

There may be some problem with RAM.

1 more replies
Answer Match 77.7%

My sister is having difficulty with her Dell desktop. She apparently installed a few updates a couple of days ago, but didn't restart her computer until today. What ends up happening now is that she keeps getting the BSoD right before the Windows XP loading screen.

This is what the BSoD says:


Quote:




PAGE_FAULT_IN_NONPAGED_AREA

*** STOP: 0x00000050 (0xC87895DD, 0x805D16D3, 0x0000000)




When I try to boot in Safe Mode (normal, networking, you name it) the last file that attempts to load is mup.sys, then the same Blue Screen.

The same result will occur when I press Last Known Good Configuration.

I might have to reformat her HDD. However, she doesn't want to lose her music, so I'm hoping there's other alternatives.

I'm assuming the recovery console will have to be involved. I just don't know what commands I'll need to enter. And I have no idea what update my sister installed on her PC.

Thanks!

A:BSoD After Installing Updates

Hi A, You can do a repair from the recovery console if you have an XP cd. This is happening to 1000s of people after updates, so it's getting quite familiar to us here. Heres a link with a list of ten things you can do first before a reinstall.

http://articles.techrepublic.com.com...1-6031733.html

If you decide to repair it as I suggested make sure you run the correct repair so that you do not lose any data on your hard drive. If you need further help just let me know.

Reguards
Patmark

5 more replies
Answer Match 77.28%

Use Windows Update to find driver updates

In Windows Update click Custom Install in the main column, and then click Select optional hardware updates in the left-hand column.

Windows Update examines all parts of your system to determine what needs updating and it may recommend more than just driver updates. It's a good idea to visit Windows Update regularly for driver updates and other non-critical updates.
 

A:Use Windows Updates to find Driver Updates

6 more replies
Answer Match 77.28%

Is there a way to disable Windows Automatic Updates from updating device drivers. There are a several PC's at my job that have problems with a device driver update from. I would still like to recieve regular security updates, but I dont want any device driver updates.
 

A:Disable Driver updates from Auto Updates?

Do not do automatic updates, select custom instead of Express and drivers will be listed, but only as an option.
 

2 more replies
Answer Match 77.28%

My updates and driver installs never finish because they always stop at a certain percentage and I have to eventually force shutdown the PC.

More replies
Answer Match 76.86%

I have Windows 7 Ultimate 64-bit.
There's 6 important update from Microsoft:
While my Acer 4736G installing this updates, Windows 7 hank and BSOD with code,
0x0000007E (0xFFFFFFFFC0000002, 0xFFFFF80002CED7F8, 0xFFFFF880031EE400, 0xFFFFF880031EE4A0)

Could you help me with this? I have KIS 2010 & Spyware Doctor installed on my NB.

Here's i attach the .dmp file in zip
For any help and comment, i'm thankful.

A:Help BSOD while installing Windows Updates

after using BlueScreenView, i actually had several error with the same problem.
I've attach new complete dump file (6 .dmp files) to zip..
Hope you can help me with this. Thanks in advance..

9 more replies
Answer Match 76.86%

I was in the middle of installing some Microsoft Updates when I got the BSoD shown in the attachment.
I don't remember exactly what all of the updates were for, but I do know that there were some driver updates for a couple plotters. I'm pretty sure that one of those is what is giving me problems.
When I try to "Start Windows Normally" I get the BSoD and end up back at the "How do you want to start Windows" black screen. If I try to "Start in Safe Mode" I get to the Windows login screen. However, my attempts to login with the correct username/password have failed.
Here is what I am thinking is my problem. Yesterday, the IT guy we hired to switch us over to a new Server machine finished up. Our usernames remained the same, the password went from xxxxxx to Xxxxxx1, and our Network Domain(?) name changed.
I do not believe a restore point was set up for the new Server setup.
A couple of questions: At the Safe Mode login screen, is it still trying to "login" to the old network? If so, my new password is wrong and if my old password is the correct one, the Server doesn't exist to login to.
I was able to boot from the XP cd, but when I tried to repair XP I got the BSoD again.
Any suggestions as to what my options are at this point? I know I probably need to disable some drivers to fix the BSoD, but don't know how to get into Windows.
Thanks for any input you might have.
 

More replies
Answer Match 76.86%

I experienced BSOD three times already from installing windows updates for .NET Framework 4. The OS launched the system restore and reverted the changes. I think I need to install these updates for me to run AutoCAD 2012 since the program crashes too.


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 50
BCP1: FFFFF87FFDB8647A
BCP2: 0000000000000001
BCP3: FFFFFA800C7A9080
BCP4: 0000000000000005
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\091412-16972-01.dmp
C:\Users\Ryan Oliver\AppData\Local\Temp\WER-48625-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:BSOD After Installing Updates for .NET Framework 4

Hello animate.

Please post it following the http://www.sevenforums.com/crashes-d...tructions.html so that we can obtain the necessary information to help you.

9 more replies
Answer Match 76.86%

Hi!
I was running both x64 & x86 version of Win7 RC1 build 7100 quite well till now.
I downloaded the images from MS.
Today suddenly my x64 gave the BSOD..
At the end of BSOD some ACPI error is mentioned
I downloaded the new updates & system was installing them when BSOD occured...
The strange thing is that I tried to repair thru every possible means from safe mode to EMS & by starting from the DVD but it failed.(Every try ends at BSOD)

Now the problem is When I try to boot from the x64 DVD(from which I installed) after "Loading files" the BSOD comes when screen says Windows Starting..... Even before the glowing animation!
I disconnected my all HDD drives but still no success...
My system specs are;
CPU Intel C2D E4500
MB Asus P5E-VMDO
Ram Corsair 6GB
PS+Cooler 600W from Cooler Master
GPU 9500GT 1gb
HDD 2XWD 500 SATA + 2XSG 500 SATA

x64 was on WD 500 while x86 is on Sg500. Now x86(with latest updates installed) is running fine but no boot from x64 at all..

A:BSOD after installing latest updates

  
Quote: Originally Posted by zillaamer7F


Hi!
I was running both x64 & x86 version of Win7 RC1 build 7100 quite well till now.
I downloaded the images from MS.
Today suddenly my x64 gave the BSOD..
At the end of BSOD some ACPI error is mentioned
I downloaded the new updates & system was installing them when BSOD occured...
The strange thing is that I tried to repair thru every possible means from safe mode to EMS & by starting from the DVD but it failed.(Every try ends at BSOD)

Now the problem is When I try to boot from the x64 DVD(from which I installed) after "Loading files" the BSOD comes when screen says Windows Starting..... Even before the glowing animation!
I disconnected my all HDD drives but still no success...
My system specs are;
CPU Intel C2D E4500
MB Asus P5E-VMDO
Ram Corsair 6GB
PS+Cooler 600W from Cooler Master
GPU 9500GT 1gb
HDD 2XWD 500 SATA + 2XSG 500 SATA

x64 was on WD 500 while x86 is on Sg500. Now x86(with latest updates installed) is running fine but no boot from x64 at all..



Try booting to SafeOS, and let us know which process it halts on.

4 more replies
Answer Match 76.86%

Have had 3 BSODs in the past week. Witnessed the most recent one when the machine was installing windows updates.

More replies
Answer Match 76.86%

I have managed to achieve the BSOD quite a lot, and have tried re-installing Windows 7 x64 on my computer three times today.

I have received the BSOD:

after trying to reformat my F: drive.
Uninstalling my Nividia drivers for a new one
After using Firefox for a while it just won't open and BSOD follows shortly after
I believe after installing Windows Live applications it startes to give me BSOD

After the first BSOD I start to get the error message:
Check filesums or somehting about the computed sums is not correct.

Any help would be greatly appreciated!

System Manufacturer/Model Number Alienware
OS Windows 7 x64 - RC Build 7100
CPU Intel(R) Pentium(R) D CPU 3.00GHz (2 CPUs), ~3.0GHz
Motherboard ASUS P5ND2-SLI NFORCE4 MB
Memory 8 GB DDR3
Graphics Card BFG GeForce 280 GTX
Sound Card ASUS AUDP5ND REALTEK ON-BOARD AUDIO
Monitor(s) Displays Samsung PnP

PSU M1000 CoolerMaster
Case Alienware 1st Gen
Cooling Silent Fans
Hard Drives WD RAPTOR 74GB SATA 10K RPM 8MB HD CRUCIAL 512MB DDR2 PC5300

A:BSOD after installing all Windows Updates

DB

Hi and welcome to sevenforums

can you get into win 7? If so could you go to your windows\minidump dir and find the dump files for the bsod. they have a *.dmp extension. zip them and upload so we can take a look at them.

In case you need help. When replying click on the icon shaped like a paperclip (to attach) browse to the dump file, click upload and close when done.

Thanks

Ken

2 more replies
Answer Match 76.86%

hi forum.
I've been playing Diablo 3 for a while now, and sometimes after long times of play (~4 hours) my game and pc freeze and i have to hard reset it.
I thought ill update my Geforce driver, so i got the 301.42 driver and installed it. in mid-install i god a BSOD.

here's the BSOD report file.
Windows7_Vista_jcgriff2_2305.zip

thanks.

More replies
Answer Match 76.44%

Hi, I've recently been using drivermax to update my drivers. After my updates, I've been randomly getting BSODs then and now. I looked into the minidump with bluescreenviewer but cannot find a fix to the problem. I've uploaded the minidump. Please help! I'm using a shared a computer so I don't know if the origin of the problem is caused by someone else.

A:BSOD after driver updates. No idea which driver is at fault

I didn't see the BSOD protocols....sorry! Here is the required folder. Also, i'm told that the computer crashes frequently when trying to run old pc game like bioshock or empire earth.

2 more replies
Answer Match 76.02%

Hello, everyone. First post here and thank you in advance to anyone offering assistance. I'll start with some background information.

I've just recently obtained a computer that was still running Windows XP Pro without any Service Packs installed. I originally had trouble installing the updates because I was receiving an error that said something along the lines of BITS 2.0 and WinHTTP 5.1 couldn't be installed. After quite a bit of searching online I fixed the problem by changing the permissions settings in the registry.

After that was fixed I was rather relieved because I figured I would finally be able to update the computer to SP2. After installing several Windows Updates I restarted the computer only to receive a blue screen of death. The exact error was:

*** STOP: 0x0000008E (0xC0000005, 0xF7C30C86, 0xA22D9CB0,0x00000000)

I then started searching what could be causing the STOP error. I looked online again and found malware was the cause of the error it seemed. So I followed the advice in the other thread and downloaded Look2Me-Destroyer, F-Secure BlackLight, KillBox, ATF Cleaner and AVG Anti-Spyware. I ran them all, and deleted two high risk trojans with AVG. Next, I scanned with BlackLight and was given the following message from the log:

02/28/08 01:57:15 [Info]: Hidden process: C:\WINDOWS\system32\koos.exe
02/28/08 01:57:52 [Info]: Hidden file: C:\WINDOWS\system32\koos.exe
02/28/08 01:57:52 [Info]: Hidden file: c:\WINDOWS\system32\kprof
02/28/08 0... Read more

More replies
Answer Match 76.02%

OK, so I've been struggling the past few days after recently building my very own first rig.

After finally finishing, booting it up, and installing all the latest drivers, I've started getting a few BSOD's when I do certain activities.

They mostly seem to be triggered by two things:
Running World of Warcraft's streaming downloader
And installing Windows Updates upon system shutdown/restart

I've made sure to attach the SF diagnostic info in a zip, and would greatly appreciate anyones help in solving this issue

System Specs:
Win Home Premium x64
ASRock 970 pro3 R2.0 Mobo
AMD FX-6300
8gb of Kingston HyperX DDR3 1600
nVidia Geforce GTX 760
Samsung Evo SSD
WD Blue 7200 rpm 1 TB drive

Cheers,
Krusher

A:BSOD downloading WoW/installing updates on shutdown

As an update, the BSOD's vary on how fast they occur. Happen anywhere from 5 minutes to 3 hours after booting up the computer.

4 more replies
Answer Match 76.02%

I have service pack 1 with Windows 7 Ultimate x64. I thought it was my PSU previously, so I replaced that after it burnt out my old mobo. I've now replaced my mobo and have checked that my PSU is outputting the right voltages. I'm still experiencing blue screens, typically when I'm installing programs. Ran Memtest for multiple cycles with each stick of RAM and it checked out fine. .DMP files included as well as performance check.

Any help is super appreciated, been a frustrating few months as I replace part after part.

A:BSOD when installing Windows Updates (also other times)

It's looking like your other hardware failures may have had a negative impact on your ram.
The bsod quotes a memory management error.
I would check it by running memtest overnight. (unless it immediately starts spitting out errors then you know right away.)
RAM - Test with Memtest86+


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000001236, The subtype of the bugcheck.
Arg2: fffffa8009ce4970
Arg3: fffffa8009ce49a0
Arg4: 00000000001ad6e2

Debugging Details:
------------------
BUGCHECK_STR: 0x1a_1236

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: svchost.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80002d75dab to fffff80002c82c40

STACK_TEXT:
fffff880`074a37b8 fffff800`02d75dab : 00000000`0000001a 00000000`00001236 fffffa80`09ce4970 fffffa80`09ce49a0 : nt!KeBugCheckEx
fffff880`074a37c0 fffff880`01909eb2 : 00000000`00000866 fffffa80`09ce4970 fffffa80`07a33078 00000000`00000867 : nt!MmFreePagesFromMdl+0x31b
fffff880`074a3820 fffff880`019097df : fffffa8... Read more

1 more replies
Answer Match 76.02%

The problem seemed to have started when I downloaded and installed the new Windows 10 security updates. Nothing really triggers the BSOD, and it normally happens about 5 minutes from booting Windows to the Desktop. I just uninstalled the updates and so far so good. I wan to make sure that it was the updates and not something else (Driver, 3rd party program). I actually BSOD'd while trying to submit this ticket. Thank you for your help.

More replies
Answer Match 76.02%

No problems with this machine prior to this.

Brand: Acer
Model: Aspire 5742
Processor: Intel Core i5-450M
RAM: 4GB
OS: Windows 7 Home Premium (64bit)

Minidumps and Report from jcgriff's program attached. No perfmon report as I got errors trying to generate it... not sure why

Very grateful for any assistance - thanks in advance!

A:3 BSOD's in 24 hours after installing Windows Updates

One of your problems is:

HTML Code:
GT-I9100 USB\VID_04E8&PID_6860&MS_COMP_MTP&SAMSUNG_ANDROID\7&34D0292C&2&0000 This device cannot start.
As a test, de-install.

You also have some problems with Windows Update





Quote:
Please go to your Maintenance Center and check the Windows Update status. Make sure you are up to date, do them one by one manually if needed.
For help or reset see: Windows Update - Reset


Your dump shows problems with a network driver from Atheros. Please check and install newest here: http://partner.atheros.com/Drivers.aspx
Problem driver: \SystemRoot\system32\DRIVERS\athrx.sys

But, as I find multiple strange Samsung drivers that are causing problems, I suspect that de-installing your smartphone or whatever it is... will help.

3 more replies
Answer Match 76.02%

Hello All,

So today I attempted to install the latest Nvidia Driver from their official website. While the installation process was being carried out my monitor went to sleep (no signal from the computer) and never came back, even though my pc was still running. So after waiting for a while I manually restarted the computer (power button) and booted in safe mode. Here I was met with a problem signature that included this information:

Problem Signature
Event Name: Blue Screen
OS Version 6.7601.2.1.0.768.3
Locale ID:1033

Additional Info
BCCode: 116
BCP1: FFFFFA80105FA010
BCP2: FFFFF8800738D19C
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

I also have a dump file in my minidump folder (062515-21091-01.dmp) but I couldn't figure out how to attach it.

Another strange thing is when I restarted windows normally after checking the problem dxdiag.exe and GeForce experience both say that the new 353.30 driver was installed correctly and is running. Thank you so much to anyone reading this and trying to help, let me know if you need any more information.

Thanks,

nwinjum

A:BSOD While Installing Latest Nvidia Driver 353.30

Hello and welcome nwinjum mate read these and post the dump files
Dump Files - Configure Windows to Create on BSOD
&
Blue Screen of Death (BSOD) Posting Instructions

then we might be able to help you.

5 more replies
Answer Match 76.02%

After installing the latest Nvidia driver for my GeForce 8800GT my Windows Ultimate 64-bit crashes to bluescreen on booting, the only way to start it then is in safe mode. Removing the drivers does not help, forcing me to reinstall Windows completely. Using the driver that Windows downloads automatically via Windows Update seems to work, but there is often screen tearing and occasional graphic card resets. Anyone else had such problems with this driver?

A:Installing Nvidia 195.62 driver causes BSOD on boot

Install the driver in safe mode, using the device manager. Reboot to normal mode after it's done.

You could also post a crash dump if you'd like to determine what the problem may be. Safe mode + networking is good for that.

9 more replies
Answer Match 76.02%

After installing a display driver, when it s just booted and logging in, the whole thing stopped and become BSOD few seconds later.
The BSOD said attempt to reset the display driver and recover from timeout failed. (0x00000116)
I guess it s the problem of my display driver, so I uninstalled the driver and become fine.
But I need the display driver ( without the driver is inconvenient, could anyone tell me what happened to my display card?

The following is the spec of my PC
OS: Windows 7 Ultimate 64-bit
RAM: 4GB
CPU: AMD Athlon II X4 631
Display Card: Nvidia GT240 (Inno3D)
DirectX 11
I ve installed the WHQL version of driver but no use.

Thanks!
 

A:BSOD after installing Nvidia display driver

There's lots of work going on to convince us that we need software to trawl our hardware and install the latest version of all drivers. If you have the latest computer with a state of the art graphics card and need to play newly released games at a higher resolution than your friends it's important. That's why nVidia are constantly tweaking the graphics drivers. For anyone with a graphics card that's getting on, like the GT240, it's not so important. I suggest you try a few earlier nVidia drivers for your card. If they don't work either then you need to revisit the problem.
 

2 more replies
Answer Match 75.6%

I did search out this problem...very old posts recommended I start a new thread.

For the last 2 weeks every time I shut down automatic install...installs the same 8 updates.

I'd appreciate any help in solving this problem.

Thanks,
Toni

A:Windows 7 Updates keeps installing same 8 updates over and over

Which updates, and do you have any other odd symptoms?

9 more replies
Answer Match 75.6%

Hello,

I have been having issues with wireless module not showing available networks on this laptop recently. I have had to reboot to get the wireless networks to show up. I checked the Dell site the other day and installed an updated driver for the wireless adapter, as well as the video card, sound card, and chipset. I have had 2 blue screens since updating these drivers (today and Tuesday). One other new item is Kaspersky internet security, which was installed earlier in the week. I have attached the information for review- please let me know if any additional information is needed. Thanks in advance for your assistance.

Daver

A:BSOD's- Windows 10 after driver updates

   Warning
Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with TweakBit Driver Updater, please remove them as it may cause trouble.
You only need the drivers Dell provides you

Please remove Kaspersky while troubleshooting as a test and use Windows Defender as alternative
Service articles
Below you can see NETIO.sys which is the Network Input/Output System driver of Windows, this refers to either the network drivers or AV software. There is no cause in the dump, but this may point to a possible cause.

Code:
ffffd000`8b95c7b0 00000000`00000000
ffffd000`8b95c7b8 00000000`00000008
ffffd000`8b95c7c0 00000000`00000000
ffffd000`8b95c7c8 fffff801`31f688e0 NETIO!MIDL_user_allocate
ffffd000`8b95c7d0 fffff801`31f93af0 NETIO!CleanupQoSProvider
ffffd000`8b95c7d8 ffffd000`8b95cce8
ffffd000`8b95c7e0 00000000`00000000
ffffd000`8b95c7e8 00000000`00000000
ffffd000`8b95c7f0 ffffc001`9cdf3820
ffffd000`8b95c7f8 fffff801`31fa7f80 NETIO!BFE_NET_EVENT_TYPES+0x840
ffffd000`8b95c800 00000000`00000000
ffffd000`8b95c808 00000000`00000000
ffffd000`8b95c810 00000000`00000140
Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

0 more replies
Answer Match 75.18%

So...my brand new laptop is failing to update Windows 8, continually giving me a DPC Watchdog Violation. I have no idea why (or what that even means!). I'm not particularly tech savvy. A quick Google brought me here, I'm still unsure what I'm dealing with, but hopefully someone here can help/guide me through the issue?

I have read the BSOD posting instructions and uploaded the the debugging zip below. The laptop is an HP Pavilion 15-p144na and was new out of the box last night. Spec:

Windows 8 x64
AMD A8
8GM RAM
AMD Radeon 7

I uninstalled some pre-installed bloat, like Wild Tangent Games and CyberLink YouCam, etc. All I have subsequently installed is Chrome, Malwarebytes and HTC Sync Manager (to get a driver to tether my HTC One; have then removed the Sync Manager immediately after). Having done all this I attempted to update Windows at 8:20pm and had issues with it crashing three or four times up until 2:45am when I gave up, frustrated, and went to bed.

Any help would be appreciated. Many thanks.

A:BSOD Watchdog Violation installing Windows Updates

Hi moosticks,

Welcome to the 8forums.

Please fill in your system specsPlease go to this site and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

Do you have anything connected to your laptop?

3 more replies
Answer Match 75.18%

Hello, I am new to the forums here and am having great difficulty with my new computer. It is only a month old and has been crashing since I got it. I have done a full windows wipe twice. It seldom crashes when I am just on the internet, but will always crash when I try to install updates from SWTOR (Star Wars the Old Republic).

My Ethernet controller and USB need drivers, yet when I try to windows update them it says they cannot find the drivers. Not sure if this is what is causing the crash.

A:BSOD with differet crashes while installing updates on SWTOR

Also included the latest data from WhoCrashed:
On Wed 5/9/2012 2:43:58 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\050912-10623-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7F1C0)
Bugcheck code: 0x101 (0x19, 0x0, 0xFFFFF88002F65180, 0x2)
Error: CLOCK_WATCHDOG_TIMEOUT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an expected clock interrupt on a secondary processor, in a multi-processor system, was not received within the allocated interval.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.
On Wed 5/9/2012 2:15:19 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\050912-10592-01.dmp
This was probably caused by the following module: cpudrv64.sys (cpudrv64+0x1912)
Bugcheck code: 0x1E (0xFFFFFFFFC0000096, 0xFFFFF88006DDD912, 0x0, 0x0)
Error: KMODE_EXCEPTION_NOT_HANDLED
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was i... Read more

9 more replies
Answer Match 75.18%

I recently wiped my hard drive with dban using the autonuke option. It ran fine and finished sucesfully. I then installed windows 7 home premium x64 on that same hard drive. That also ran fine. I then updated through windows update, and some updates did install, inluding service pack 1. The bsod happens when running automatic updates in windows. It downloads all the updates fine, but when it gets to installing the last few, or at least from what I can tell since the progress bar is almost full, the bsod happens. It says bad pool header 0x019 etc. Malware bytes free trial premium was running while installing the updates.

A:BSOD when installing windows updates, error 0x019

mvac.sys appears to be the issue which is part of malwarebytes. I've never known Malwarebytes causing issues.
It might be due to you have the free trial of premium which we always recommend you disable.

The best option I can think of is to uninstall Malwarebytes altogether and then install it again by following these settings.

Untick the option to start the free trial of malwarebytes pro


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 19, {20, fffffa8007fa8800, fffffa8007fa8820, 402000a}

Unable to load image \??\C:\Windows\system32\drivers\mwac.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mwac.sys
*** ERROR: Module load completed but symbols could not be loaded for mwac.sys
Probably caused by : fwpkclnt.sys ( fwpkclnt!FwpsConstructIpHeaderForTransportPacket0+20a )

Followup: MachineOwner

Code:
fffff880`07d38358 fffff800`02bf66d3 : 00000000`00000019 00000000`00000020 fffffa80`07fa8800 fffffa80`07fa8820 : nt!KeBugCheckEx
fffff880`07d38360 fffff880`0172842d : 00000000`00000008 fffff880`00000004 00000000`676e7049 fffff880`02eab0... Read more

3 more replies
Answer Match 75.18%

About 4 days ago i've installed "Windows TinyXP" instead of Windows 7.
Since then i have not been able to play any games because of an error saying "Driver does not support Direct3D9.0c"
So i tried to install the latest driver, but i got an BSOD looking like this: http://img443.images.../imag0147x.jpg/
So since that did not work i entered "Safe Mode" and uninstalled the driver again...
After that i tried installed the driver as an "Clean Install" by clicking Custom Install, that option should delete old driver data before installing new, so i tried that...
BSOD once again...
I am running in safe mode right now, and i would like if someone could tell me why i cant install the latest driver and how to fix it..
Also, my graphics card is a Nvidia Geforce G210M (Notebook)

About 4 days ago i've installed "Windows TinyXP" instead of Windows 7.
Since then i have not been able to play any games because of an error saying "Driver does not support Direct3D9.0c"
So i tried to install the latest driver, but i got an BSOD looking like this: http://img443.images.../imag0147x.jpg/
So since that did not work i entered "Safe Mode" and uninstalled the driver again...
After that i tried installed the driver as an "Clean Install" by clicking Custom Install, that option should delete old driver data before installing new, so i tried that...
BSOD once again...
I am running in safe mode right now, and i w... Read more

A:BSOD when installing the latest nvidia graphics driver

You need a legal copy of Windows.

1 more replies
Answer Match 75.18%

G'day,

I've been experiencing some BSOD's every few hours. I suspect its related to having updated my NVidia card driver to Version 301.42 today. The driver was downloaded directly from the NVidia site after being prompted by the NVidia update utilty that one was available. I use an EVGA NVidia GTX 560 1024MB card.

As an interim measure, I've uninstalled this driver, and let Windows Update find one for me.

Could someone have a look at my DMP file and confirm that this driver was the issue, or whether there is something else going on?

Thanks,
Golden

A:BSOD 0x00000124 after installing updated NVidia driver

I would install driver 296.10
Do a clean install and only choose the driver and physx software (click advanced before install).
The newest driver isn't always the best one.

I have two EVGA GTX580's, no issues whatsoever with 296.10

9 more replies
Answer Match 75.18%

Little background, bought an GS60-003 Ghost from MSI a few weeks ago and it game with windows 8 OEM. I really don't like windows 8 so I figured I would give Ubuntu a try and I found a didn't like that either. Ultimately I decided to purchase Windows 7 Home Premium x64 and have that installed as my current OS. I went through and got the updated versions of my drivers from MSI's website (to my knowledge). However whenever I install any type of nvidia driver I get random BSOD. If I remove the nvidia driver and software from my computer then I am good however this is kind of an unaccaptable compromise seeing as how I bought this computer to play games. I used BlueScreenView and it said I had a stop error 0x00000009f due to ntoskrnl.exe however I don't really know what this means and can't seem to find a post with someone having a similar situation as me and I'm really hoping you guys can help before I try and take it someplace to have it serviced. Attached is the debug file created by DM Log Collector.

A:BSOD randomly after installing latest Nvidia Driver.

Hi DillyMac.

You laptop GS60-003 Ghost does not seem to have an onboard GPU, and a dedication one, GeForce GTX 860M only.

The BSOD that you are having means your GPU fails to respond within a specific time during power transition period (hibernate or sleep).

As your computer is new, and you are having the issue with multiple versions of the display driver, better you RMA the laptop.
__________________________

Code:
BugCheck 9F, {3, fffffa800ced6a10, fffff80002c073d8, fffffa8012dbd1e0}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800ced6a10, Physical Device Object of the stack
Arg3: fffff80002c073d8, nt!TRIAGE_... Read more

1 more replies
Answer Match 75.18%

About 4 days ago i've installed "Windows TinyXP" instead of Windows 7.
Since then i have not been able to play any games because of an error saying "Driver does not support Direct3D9.0c"
So i tried to install the latest driver, but i got an BSOD looking like this: http://img443.images.../imag0147x.jpg/
So since that did not work i entered "Safe Mode" and uninstalled the driver again...
After that i tried installed the driver as an "Clean Install" by clicking Custom Install, that option should delete old driver data before installing new, so i tried that...
BSOD once again...
I am running in safe mode right now, and i would like if someone could tell me why i cant install the latest driver and how to fix it..
Also, my graphics card is a Nvidia Geforce G210M (Notebook)
 

A:BSOD when installing the latest nvidia graphics driver

Please do not start multiple threads on the same topic.
 

1 more replies
Answer Match 75.18%

About 4 days ago i've installed "Windows TinyXP" instead of Windows 7.
Since then i have not been able to play any games because of an error saying "Driver does not support Direct3D9.0c"
So i tried to install the latest driver, but i got an BSOD looking like this: http://img443.images.../imag0147x.jpg/
So since that did not work i entered "Safe Mode" and uninstalled the driver again...
After that i tried installed the driver as an "Clean Install" by clicking Custom Install, that option should delete old driver data before installing new, so i tried that...
BSOD once again...
I am running in safe mode right now, and i would like if someone could tell me why i cant install the latest driver and how to fix it..
Also, my graphics card is a Nvidia Geforce G210M (Notebook)
 

A:BSOD when installing the latest nvidia graphics driver

We do not support pirated software. Closing.
 

1 more replies
Answer Match 74.76%

I recently started working for a MSP and I'm learning the ropes, so bear with me.

I deployed driver updates for a client, and three computers have BSOD'd today.

I've tried disabling drivers, updating, the whole 9 yards.

I can only start the PC in safe mode.

I appreciate any help given. I've been pulling my hair out over this.

More replies
Answer Match 74.76%

Hello All,

I was referred here by NeonFx from the TechGuy Security forum. He had me run a slew of anti-virus/anti-spyware diagnostics. According to NeonFx my system is currently infection free and he states the problem lies elsewhere.

He also had me run the Windows Update FixIt tool in both Default and Aggressive mode - both of which did not fix the problem. So what is the problem??

PROBLEM:

When I run the install Windows updates, the updates do not install, and I receive the following message (not verbatim, but close):

"Some updates were unable to be installed..."

This problem "came out of no where" and there has been no suspicious activity prior to it starting other than an IE7 redirect rootkit that NeonFx helped me remove (if I recall correctly an infection of agp440)...

Stumped, stumped and stumped...
 

A:Problem Installing Windows Updates: "Some Updates Were Unable to be Installed"

8 more replies
Answer Match 74.34%

I have a DELL (one year) w/ Windows 7 and I?ve downloaded Driver Updates and Scanner Update software, and I see that I have several ?Drivers? that came up out-dated. Is this even true?

If so, why doesn?t DELL send me emails or update automatically?

I won?t mind buying a software, but which one?

Sorry, so many questions. Thanks in advance.
Scotty

A:BUY? Driver Updates or Scanner Updates

Forget the driver update software, unless you are having issues you don't need to update any drivers and if you do you should get then directly from the manufacturers website and not via a 3rd party product.

Also please do not repost the same question in multiple sections of the site as that is against forum rules.

4 more replies
Answer Match 74.34%

how and where can i do this for the O/S and software
 

A:driver updates and bios updates

If your computer is running well I would not try to fix something that isn't broke. Other than installing updates for Windows and anti-malware, newer sometimes isn't better.
 

1 more replies
Answer Match 74.34%

Someone who does not have internet connection at home wants to bring me his hard drive from his desktop computer, so I can install a program on it.
Assuming I can get it to boot on my hardware (I have had pretty good luck with that in the past), I don't want windows to update the drivers, because then he will get drivers for the wrong hardware.
But it would be nice to get him the other windows updates.
How to do it?

A:how to get windows updates without driver updates?

Originally Posted by shmu26


Someone who does not have internet connection at home wants to bring me his hard drive from his desktop computer, so I can install a program on it.
Assuming I can get it to boot on my hardware (I have had pretty good luck with that in the past), I don't want windows to update the drivers, because then he will get drivers for the wrong hardware.
But it would be nice to get him the other windows updates.
How to do it?



Really, he needs to bring you the whole box. You will mess up the activation doing it that way.

1 more replies
Answer Match 74.34%

I upgraded from Windows XP SP3 to Windows 7 Enterprise, installed the drivers of every device that needed one, including that of the nVidia GEForce 210 graphic card, which I downloaded from the nVidia official website. Then, I installed updates from Windows Update and some other needed programs, and in the end, GTA San Andreas and Off-Road Drive. Started playing GTA and after some seconds there is this BSDO and computer restarts. Tried it with Off-Road Drive, the same. I will attach the dump files created from the PC, but I think it is something related to the graphic card or graphic card driver, anyways, since it is annoying and I am bit confused, it would be of really great help if you guys could give me an idea.
 

A:BSOD at the beginning of games after upgrading to Windows 7 and installing updates

This is indeed graphics driver related. What are your complete system specs including power supply. Going from XP to windows 7 is not that easy. Your motherboard may not have the proper Windows 7 compatibility either
 

13 more replies
Answer Match 74.34%

Hello guys, I'm new here and I've got a problem with my laptop.

It started a while ago, since I haven't been able to use my laptop last week. I keep on getting BSODs, particularly the kernel security check failure, followed by a boot loop, then irql_less_than_or_equal_to. I did a system restore and that seemed to fix it. However, when windows installed its updates again, I get the same BSODs. Fortunately, it seems windows 10 rolled back the changes and I am able to use the laptop at the moment.

It's getting quite frustrating as I didn't have that much BSODs back when I was using windows 8.

Thank you for your help, in advance.

More replies
Answer Match 74.34%

I used the Windows 7 Home Premium Upgrade CD to upgrade from Vista to Windows 7 (32 bit). The installation was successful through the .NET upgrade, but I had problems once I installed the (57) updates. The first time I went through the process, the system froze, I had to restart in safe mode a couple of times, etc.

I finally restored the system to the state it was in before the .NET upgrade (the first restore point available - the restore to the second restore point failed). I then let the system do the .NET upgrade and tried to install the (57) updates again. The system again crashed with the dump that I am attaching. The update information shows that the updates failed and they are now queued to be installed again.

The laptop is a Lenovo Thinkpad T60 - just under 4 years old
Vista came with the system and was at the Syspack 2 level
Windows 7 upgrade was the retail version (3x version). I was able to install it without problems on my husband's Thinkpad T61

A:BSOD crash after installing updates to Vista to Windows 7 uprade

Welcome to SF.





Quote:
Unable to load image \SystemRoot\System32\Drivers\NIPALK.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NIPALK.sys
*** ERROR: Module load completed but symbols could not be loaded for NIPALK.sys
Probably caused by : NIPALK.sys ( NIPALK+120e6 )







Quote:
NIPALK.sys Mon May 12 17:21:05 2003


Update your video driver:
Driver c:\windows\system32\drivers\igdkmd32.sys (8.14.10.1930, 4.59 MB (4,808,192 bytes), 9/23/2009 8:18 PM)

Update your network driver:
Driver c:\windows\system32\drivers\e1e6032.sys (9.7.255.0, 218.13 KB (223,360 bytes), 3/5/2008 5:43 PM)

Update your wireless network driver:
Driver c:\windows\system32\drivers\netw5v32.sys (12.4.1.4, 4.04 MB (4,231,168 bytes), 6/10/2009 5:18 PM)

Update your audio driver:
Driver c:\windows\system32\drivers\adihdaud.sys (6.10.1.5410, 336.00 KB (344,064 bytes), 6/6/2007 10:46 PM)

8 more replies
Answer Match 73.92%

I haven't been able to update my nVidia drivers for over a year now. It's starting to cause troubles: games started to crash. Now when I shutdown my PC it does the automatic Windows updates and when I turn it back on, I get the same BSOD. I have a feeling it's the video drivers that cause issues, so today I tried uninstalling them and installing the newest ones (306.97), but it didn't work so I had to do a system restore. BTW, my current driver version: 285.62.
P.S. I'm shutting down my PC by pressing Ctrl + Alt + Del and then Shutdown, so it doesn't install the updates.

A:Cannot install any driver or windows updates, getting BSOD 0x0000007E

Welcome aboard, madbuddha.

Your basic problem is the dispaly driver, as the latest version is somehow unstable in cases. I would recommend you roll it back to an earlier one, a known good stable version, which I suggest usually, and in most of the cases it works.
Download and install Driver Fusion.
Reboot the computer in Advanced Boot Options, safe mode. Search Driver Fusion in your start menu, and remove all components of your nVidia display driver.
Boot normally now. Go to Drivers - Download NVIDIA Drivers, Drivers > Beta and Legacy; search there with your cards particulars for GeForce 306.23 Driver, dated 13.9.2012 and install it.
A few problems are there with the storage driver, as I am seeing. A search revealed that you are using nForce as the chipset driver, and that includes nvstor.sys as the storage controller driver. You need to try to update nForce, as it contains not only the storage controller, but also network controller and a lot of other vital drivers.

Go to Drivers - Download NVIDIA Drivers, search for nForce, as per your motherboard's chipset specifications.

What is most important that you have SPTD.sys installed. Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall the program at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, ... Read more

9 more replies
Answer Match 73.92%

Basic System Specs:

- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? No, shipped with Vista, upgraded to 7.
- an OEM or full retail version? Full Retail Verison


- What is the age of system (hardware)? Three years, one month, and 11 days old.
- What is the age of OS installation (have you re-installed the OS?) Around one month old.

ZIP folder with PERFMON HTML file and Windows_NT6_BSOD_jcgriff2 folder attached.

OK,

I'm a total noob on this forum, so I tried to follow the instructions on posting.

Firstly, when you read PERFMON, it'll say my HDD is failing. I know that. I know it's stupid to use a failing HDD, but my data is backed up, and I get my Mac on Saturday. Anyways,

Last night, around 1:30 AM, I got up to shut down my computer, it was on, and in the same room as me, and I wanted sleep. So, I went to the start menu, and saw the update icon next to shut down. I shut down the machine instead of sleeping, so it could update. I turn off the monitor to go to sleep. I then hear the fans ramp up, then slow down, and the computer "click" like it does when it shuts off. But, the fans were still running. I turned on a lamp, and sat down. I turned on the monitor, to be facing a big fat BSoD. It didn't give me an exact message of what happened, just a STOP error code. The STOP error code was 0x0000001e, and the BCCode is 1e. I haven't installed any new hardware, and the only software I've installed was Apple's AirPort Utilit... Read more

A:Random BSOD at night, error 0x0000001e, Updates possibly installing.

Failing hard drives can cause BSOD's. But most importantly - they can die without any notice at all. Backup all your stuff immediately!!!

Win7 doesn't like wireless USB devices. You have a Compact Wireless-G USB Network Adapter with SpeedBooster ver.2
Here's my rant about these devices:





Quote:
I do not recommend using wireless USB devices. Especially in Win7 systems.
These wireless USB devices have many issues with Win7 - and using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.


The memory dump points to networking stuff - and your networking drivers (both wired and wireless USB) are from 2008. This means that it's most likely that the wireless USB drivers are causing the error (although the wired drivers are suspect also).

Please update all of your networking drivers. Be sure to use ONLY Win7 compatible drivers.

Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs:
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we s... Read more

9 more replies
Answer Match 73.08%

Samsung Series 9 laptop
Windows 7 Professional 64 bit

During driver update, system went to BSOD - now I can only boot in Safe Mode. System Restore won't allow me to roll back to a prior restore point

I'm sure there is a driver that is corrupt, but I can't tell which one needs fixing/updating.

The basics:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF880043BD443
BCP3: FFFFF8800337DC28
BCP4: FFFFF8800337D480
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Thank you in advance for any wisdom/direction you can provide

A:BSOD Samsung Series 9 driver updates, error 1000007e

Virtually all of them were Related to AMPPAL.sys Intel? Centrino? Bluetooth High Speed from Windows (R) Win 7 DDK provider

If there is a newer version use it. That driver is causing a memory exception.

1 more replies
Answer Match 73.08%

Hi all,
Could really use some help diagnosing BSOD that started with specific windows updates and is forcing me to continue to use a restore point of 11/4.
The following updates were downloaded and attempt to install with every startup

Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3200970)
Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3197954)
Update for Windows 10 Version 1607 for x64-based Systems (KB3199986)
Security Update for Adobe Flash Player for Windows 10 Version 1607 (for x64-based Systems) (KB3202790)

The system will start and show landing page, it connects to wifi and when trying to sign in goes to BSOD. If you leave landing page, it will BSOD after about 20 seconds. The error message is an APC Index Mismatch issue.  I looked in the event log and think these are the relevant items

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000001 (0x00007ffe579a65e4, 0x0000000000000001, 0x0000000000000000, 0xffffb601fc058b80). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 4a42154b-c4e6-48ca-8eff-9946ca8b2e19
Intel(R) Management Engine Interface driver has failed to perform handshake with the Firmware.

I've been posting back and forth over at the MS community but thus far just being told to do the standard collect dmps and post, hoping someone here might be able to assist in resolving.

System Specs:
Dell Venue 11 7130vProDual Intel i5-4300Y / 1.6Ghz
8G RAM
256 Storage
64bit OS
Windows 10 ... Read more

More replies
Answer Match 70.56%

For the past day windows wants to install the same 4 updates over and over, I have windows update set to download and let me choose when to install.

I can't understand why I even need them, as I uninstalled net framework.


Notice how the update at 8:17 AM., KB2656368, is the same as one of the 4 updates installed at 7:47 PM.
Windows wants to install the same four kb files again.
How do I stop this?


Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368)

Installation date: ‎6/‎15/‎2012 7:47 PM

Installation status: Successful
_______________

Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656405)

Installation date: ‎6/‎15/‎2012 7:46 PM

Installation status: Successful

___________________

Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2686827)

Installation date: ‎6/‎15/‎2012 7:45 PM

Installation status: Successful

________________

Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2604121)

Installation date: ‎6/‎15/‎2012 7:45 PM

Installation status: Successful

_____________________

Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vi... Read more

A:Windows 7 updates same for updates every time it checks for updates

See if you can System Restore to before Net Framework 4 was installed and then Hide it when it is again offered in Updates.

But be aware that some programs will need it and may not prompt you of this leaving you to guess why they are not installing or performing correctly. For this reason I always install it.

So you might want to reinstall it using its standalone installer since it may not have uninstalled correctly anyway.

7 more replies
Answer Match 68.88%

Does anyone know where i can get an update for a nvidia geforce fx 5200 graphics card. San Andreas is not working very well. :hotbounce
 

A:Nvidia updates

Hello and welcome to Techspot.

Look HERE for drivers etc.

Regards Howard :wave: :wave:
 

1 more replies
Answer Match 68.88%

can suck, I'm uninstalling it ... thanks anyway

More replies
Answer Match 68.88%

Just finished talking with both Nvida, and AMD. They said they are in the process of putting out updated drivers for the following 2 products: AMD TL-64DUAL 4 Mobile Processor's Math Co-Processor. and Nvidia's GeForce video card model# go-7150m. Both of their development departments went on to state driver updates are currently in testing, and will be released as soon as possible. Hopefully we will have them before the RTM release of Windows 8. Laptop models affected are Dell, HP Pavilions, and Alienware. More information is located on those models's website(s).

A:Nvidia & AMD updates

I am using the beta drivers for my HP Laptop with the 7150/630M GPU with no issues so far but a new driver non beta would be nice to try maybe bring my rating up from a 3.0 on the WEI rating for gaming.

2 more replies
Answer Match 67.2%

How do I installing something during the Windows Setup Menu's Installing features and Installing updates? John

A:Installing Updates and Installing features part of windows setup menu

Please correct your sentence. It is not readable.

How do you do what during that phase of install? You don't need to do anything except wait.

3 more replies
Answer Match 66.78%

Hi,

To give you some back story, I built my computer the end of August 2012. Ran Smoothly. I decided to get a 60 gig SSD to be the partition that stored Windows. I didnt have much stored on the Main HD so I deleted my original 2TB HD and tried installing on the SSD... found that the SSD was bad and sent it back. Decided just to stick with the 2TB HD. Had some issues installing windows back onto the HD as it would just hang up. Finally managed to get windows installed, had some "Not genuine" issues but that resolved after multiple restarts. That brings me to where I am at today and I feel as though the system has been getting worse. I would normally be fine with just a clean install but with all the issues I had with that initially I am very skeptical of trying it again. I have 5 important updates and 7 optional updates all of which do not install. The Installer just sits on Downloading updates and I have left it overnight with still no result. I am not sure if this is even my main issue but I am beyond the point of figuring it out myself so any help would be appreciated

I downloaded the System Readiness Tool and it Ran. I tried running the sfc /scannow in Admin cmd prompt mode and get a "Windows Resource Protection could not perform the requested operation" I attached my CBS file. Any help you could give or guidance you can provide would be greatly appreciated.

A:Windows Updates Not Installing : Error Unknown (Sits on Installing)

Hello and welcome Faticus just as matter of interest why did you give up on the SSD? was not it under warranty?

That is heck of a drive to be installing on mate just how did you prepare it for the install?

You can run a chkdsk in Windows too > My Computer > right click on the drive > Properties > Tools > Check now - then follow the points in my pic.
You then reboot and it will start a chkdsk (in DOS).

9 more replies
Answer Match 66.78%

Hi all....

I'm posting this in 2 places hoping to get a solution....

I cannot install any of the newer NVIDIA updates; WHQL or Beta. None of the 275's will install, no matter what i try to do or how i try to do it. I am currently running on the 259.87 package that came with my graphics card. It's not bad, but i would really like to have the extra functionality that comes with the newest updates.

I have done both an Express and Custom w/clean install and it always fails right at the point that the install gets to the Control Panel part of the installation. I've tried every trick i can find on the web to no avail. I AM the administrator, and I have also tried using the Admin account - with zero luck. I've tried stepping thru the installation with the 260.99 & 270.61 updates and have the same problem over and over.

So, is there a reasonable and logical explanation for all this - along with, one hopes - a reasonable and logical solution? Or is there a ghost in the machine with a bad attitude? NVIDIA swears the newest updates work, and I see folks in this forum saying they do, but I can't figure out why.

Any help out there?

A:Latest NVIDIA updates fail to install

have you tried completely wiping the previous driver before installing?
Here's a good tool for that.
Phyxion.net - Driver Sweeper

9 more replies
Answer Match 66.78%

I find it odd that when I do a Windows Update in Windows 7, the Microsoft Security Essentials (MSE) updates are also found. But if I do a Windows Update in XP Mode, the MSE updates are not found. I don't suppose this is controllable? I'd like the Windows Update to find MSE updates.

A:MSE updates flagged in Win 7 updates but not XP Mode updates

In XP you have to go into the "Add/Remove" programs and check off the "Show updates" box at the top to reveal the MS updates installed.

9 more replies
Answer Match 66.36%

Windows updates keeps installing/reinstalling the same update over and over again. I looked in my update history and it shows that they are installed successfully every time. What should I do and is this using space on my laptop by re-installing over and over again?
 

A:Solved: Windows updates keeps installing/re-installing the same update over and over

It is not using any space. Right-click the ones you already have and hide them so they don't come back.
 

3 more replies
Answer Match 65.94%

I have an older p5nt deluxe mobo with 3 graphics card for my finance computer and i always dread windows updates. Well this one was a good update and for some reason, i clicked on the nvidia updates. Once updated, I rebooted. The black screen with no cursor came up. It does feel like Windows is booting up but it just not finding the monitors... The board doesn't have a video output so how do i go about to uninstalling the updated driver. F8 doesn't work (it probably does but i just can't see it).
HELP!! PLEASE!!

A:BLACK screen of death after nvidia/windows updates

Welcome.

Are you seeing the POST screen? Can you get into the BIOS?

I would try F8 again from the beginning (keep tapping it) since the graphics card drivers for POST, BIOS and the F8 function are the basic drivers.
The Nvidia drivers have not loaded yet.

2 more replies
Answer Match 65.52%

I've been trying to update my windows 7 and I keep getting blue screens of death trying to install updates, and now I get them randomly after I system restored my pc. I've tried different system restore points that before were stable. The pc boots fine in safe mode.

A:Bsod installing windows updates 0xA windows 7 64

Complete this tutorial.

http://www.sevenforums.com/bsod-help...structions.html

1 more replies
Answer Match 65.52%

I am getting an Update message from my Nvidia Gforce Experience Software , regarding a New Game Ready Driver Version 355.60

I currently have a Game Ready Update , Version 353.62 which i updated on 20th July 2015.Just so you know , i also updated my Nvidia graphics Driver (Nvidia Gforce Experience forced me to update Cuz it stopped me from doing any editing in Nvidia Control Panel.So after i accepted the Updates installation , i was allowed to edit Nvidia Control Panel again) , which is now letting me play games at their MAX.For instance , i am playing Assassin's Creed Unity , with TXAA Anti Aliasing ON.

So , anyway , do i really need to install this latest Nvidia Gforce Game Ready Driver Version 355.60 update ?

A:Are Nvidia G Force Game Ready Drivers Updates important ?

You don't have to install it if your current drivers are running fine, however most gamers like to keep their graphics drivers up to date. If you decide to udate the drivers follow NVIDIA GeForce Experience: A Beginner's Guide to perform a clean install.

Personally I like to update my graphics drivers manually, but if Experience is your preferred method then that is the best route to take.

2 more replies
Answer Match 65.52%

Nvidia today issues a new and sizable update to GeForce experience, what everyone dreaded slowly is now going into effect. To obtain certain features you'll need to register and login with your account name and password.

Not everything is tied towards the forced login, but if you like to use features like Ansel, ShadowPlay, Game Stream and driver updates you'll need to login with your personalized account or a Google account. The new update requires you to log in so that it can store your game preferences (and probably a lot of other undisclosed stuff if not now then later) onto the cloud.

You have the option to use your Google credentials, which will link your GeForce Experience account to your Google social presence, or you can choose to create a GeForce Experience account. Either way, you will have to log in before you can use the software. The account creation process actually happens the first time you launch the app after the update, and there doesn?t appear to be a way around it.

The update to GeForce Experience is easy to navigate and is definitely a visual improvement, but the fact that you have to log in to use the software might rub some people the wrong way. You can still get your drivers anonymously by downloading them directly from the Nvidia?s website, but you?ll miss out on all the performance optimizations and the game streaming features if you don?t use GeForce Experience.Click to expand...

http://www.guru3d.com/news_story/nv...nce_acc... Read more

More replies
Answer Match 64.68%

I recently set up a new Dell 7710 Precision Workstation (Xeon E3-1535M v5 w/Intel HD Graphics P530; Nvidia Quadro M5000M; Windows 7 Pro). The Dell Precision Optimizer (DPPO) tells me there are no updates at all (no Critical, Recommended, or Optional). However, the Intel Driver Update Utility tells me I have an older chipset (14.6.1.1030) that should be replaced by a newer chipset (10.0.27). I don't know if the DPPO is taking into account particular aspects of this system that make the 14.6.1.1030 the “correct” (even if not the latest) chipset. Perhaps the DPPO should override the Intel utility. Any thoughts?

A:Driver Updates: DPPO vs. Intel Driver Update Utility

I uninstalled a driver on purpose to test the dell optimizer utility and it is telling me no updates available ! I rebooted the laptop. same thing. In device manager the device is showing as other device with a yellow exclamation mark  !!!! How do I trust the optimizer now eh ?

1 more replies
Answer Match 63.84%

hi
i am running windows vista home premium sp1 ,,new install......and receiving these updates but continuously failing.....i want to install sp2 but thinking to get these done before that..should i wait..or can go with the sp2 update

i also want to resolve the issues with these updates,,i tried to manually update but even then they are failing... help needed....please




Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86


Installation status: Failed
Error details: Code 8007000D



Windows Search 4.0 for Windows Vista (KB940157)


Installation status: Failed
Error details: Code 80073712


[U][B]Update for Windows Vista (KB955020)


Installation status: Failed
Error details: Code 80070570


Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930)


Installation status: Failed
Error details: Code 80070570


Security Update for Windows Vista (KB2481109)


Installation status: Failed
Error details: Code 800B0100

A:updates not installing

You must get those done. As soon as you have all the required updates, you will receive SP2 via automatic update.
Some of those codes can be caused by harware problems with the computer.
Take a memory test. and then test in the upgrade center.
This is the Seven upgrade advisor, see if it picks up problems with your computer
http://windows.microsoft.com/upgradeadvisor
Memory test. Run for 8 passes. Check slot with a good stick
http://www.geekstogo.com/forum/topic...ing-memtest86/

2 more replies
Answer Match 63.84%

I have the following updates which won't install:

Internet Explorer 9
KB2676562
KB2679255

These have been sat on my computer for months and I can't get them to install.

As far as I can see IE9 minimum requirements are met, can't see why it won't install.

The other updates say they've installed, five minutes later they're back in the update list.

Please can someone help, I'm getting hacked off with them.

A:Updates Not Installing

Hi and welcome to TSF you can try this How do I reset Windows Update components?

1 more replies
Answer Match 63.84%

The need (and value) of updating to XP SP3 has come up in a couple different threads (vs. just keeping SP2 + and getting all updates). So, started this thread to offer some info as well as personal opinion and solicit same from others.

Is SP3 equivalent to SP2 + current Windows updates?
I?ve read several sites (not blogs) i find reputable and knowledgeable about XP which indicate there are differences.
As i understand it, SP3 includes "updates and hotfixes" that were available in SP2 but aren't hotfixes those updates you only got from MS if you contacted them to say you really need it???
Finally, Overview of Windows XP Service Pack 3 from Microsoft summarizes some possible differences you may find as well as a few "new" features unique to SP3
Some updates/features available in SP2 were optional. In SP3 they're all installed by default
A few features are new to SP3. Period. They don't change the user interface (i.e. the customer's experience as Microsoft calls it) but do affect XP's behavior.
Is there other value to having users with problems update to SP3?
I believe so. I?ve found it?s not rare to find newbies or those just less "computer savvy" who believe they're current with SP2 when, in fact, a look at their installation history shows that?s not true (update install failures that are ignored, sometimes ignored to the point of being turned off). As my own rule of thumb i feel much more confident that... Read more

A:The value of installing XP SP3 vs. SP2 + updates

Many programs such as Belarc Advisor will inventory and list all the service packs and updates installed... and tell you if you are missing any.
I recommend just the opposite if your computer has some significant age or an older cpu, and OS... SP3 raises havoc with some HP AMD machines, some Gateway, and some eMachines... by test. Which don't show up until SP3 is installed.
ZoneAlarm, Comodo, and SunBelt have had connection and detection problems with some conflicts between Microsoft and their install.
Bottom line. Don't install it if you do not know that you need it. That can always be done later. Most of those items in SP3 benefit Microsoft... not the user.
 

27 more replies
Answer Match 63.84%

My windows live updates will not install and I just dont understand why. Im hoping someone else is having the same problem.

A:Updates not installing

Welcome to the Forum . .

If the Updates are downloading, but the installation fails, try Re-registering the Windows Update DLL with the commands below

Click Start, click Run, type cmd, and then click OK.

Type or copy and paste the following commands. Press ENTER after each command.


regsvr32 wuapi.dll
regsvr32 wuaueng.dll
regsvr32 atl.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wuaueng1.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wuweb.dll
regsvr32 wups2.dll
regsvr32 msxml.dll
regsvr32 msxml3.dll
regsvr32 msxml2.dll
regsvr32 qmgr.dll
regsvr32 qmgrprxy.dll

5 more replies
Answer Match 63.84%

Help!
Updates not installing on automatic. I am using XP SP2
http://i17.photobucket.com/albums/b100/fooddestroyer/Installerror.jpg

A:Updates not installing

Try going to Microsoft Windows Update and running the up dates. If they do not install there it will give a specific error message. Let us know what it says.

5 more replies
Answer Match 63.84%

Hi.  It seems that my windows 7 updates are not loading at all.  Automatic update fails every time I try
I have checked and the last successful update was in July 2016  Any help would be appreciated
 

A:updates not installing

Try running the Windows Update Troubleshooter and let me know what it says: http://download.microsoft.com/download/F/E/7/FE74974A-9029-41A0-9EB2-9CCE3FC20B99/WindowsUpdateDiagnostic.diagcab

6 more replies
Answer Match 63.84%

Updates keep installing over and over

A:Updates keep installing over and over

Run the dotnetfix cleanup utility and then after restarting go back to Windows Update and install all the updates again

1 more replies
Answer Match 63.84%

I am using an Acer aspire laptop with windows Vista installed. The computer is set to self install updates however I have recently experienced the problem that they do not and in attemptoing to do this manually through thr Windows Security Centre I get a message saing unsuccessful Error Code 646. The Windows Security System is off and Norton Security is working. Can anyone Help?

Many thanks

JIM the Pilot
 

A:installing updates

Why are you going through the Security Center to download and install Windows updates? Why don't you use the Windows Update/Microsoft Update link in the start menu, or open Internet Explorer and then click Tools - Windows Update?

You should also set it to only notify you of new updates and not to automatically download and install them. You then have control over what gets installed and when they get installed.

----------------------------------------------------------------
 

3 more replies
Answer Match 63.84%

Hey All,

My system is setup to download updates automatically, but prompt me to install them. I've downloaded a few updates (WMP, IE 7) but decided to install them at a later time. Well, I'd like to install them now, but the little yellow shield isnt in the system tray anymore. Is there a way to install them? I went to the microsoft website and the automatic scan says I have all of the most recent updates (yeah, I have them, but cant find them now).

Thanks!
 

A:Installing XP updates

If you don't see the yellow shield when you click the << to expand the notification bar, the update have likely been applied.
 

2 more replies
Answer Match 63.84%

My computer will not install updates

A:installing updates

Are you using an original xp disk?

3 more replies
Answer Match 63.84%

I am running V1511 OS10586.14 (installed from USB via Media Creation Tool) Updates, mainly for Antivirus definitions are downloading but are not installing. They show up in C;Windows/SoftwareDistribution/Downloads, but will not actually install. I have tried deleting the download file and they will load again, but not install. Obviously I have checked that the system is set to automatically download and install updates. I have run the System Fle checker utility and all passed no problems. The only update that has installed correctly was KB3103688 that was installed just after the new OS was installed. A virus def downloaded at the time, showed as installing for a short time and then literally vanished from the screen.
I should add I had the same problems with 10586.3. The current antivirus def installed is 1.211.1040.0 and I have just downloaded 1.211.1050.0 - which loaded to the downloads folder, showed as installing and is not showing as an installed update.
What gives?
Cheers

A:Updates not installing

They don't show as installed anymore if you look in the windows update > advanced options > View your update history. You can see the latest version installed with the update tab in windows Defender.

2 more replies
Answer Match 63.84%

Im having issues installing some automatic updates. I keep on getting an error for "some updates could not be installed: Security Update for Windows XP (KB977165)" Im not quite sure why it cant, but its been like that for a while. Any advice?

A:Updates not installing

Install them manually...use the WUS troubleshooter...and so on.How to troubleshoot common Windows Update, Microsoft Update, and Windows Server Update Services installation issues - http://support.microsoft.com/kb/906602 Microsoft Windows Update Troubleshooter - http://v4.windowsupdate.microsoft.com/troubleshoot/ PC Hell How to Fix Problem When Windows Updates Download But Won't Install - http://www.pchell.com/support/windows_upda...t_install.shtml Louis

1 more replies
Answer Match 63.84%

I have a NT 4.0 machine that is running out of hard drive space and I see that there is a lot of these $ntuninstallxxxx$ in the WinNt folder. The question is can I safely remove these if the updates worked fine. I think that these are for uninstalling the updates, so do I really need them?

Any other ideas on how to trim the fat?

dtugg
 

A:NT 4.0 (un-installing updates)

Not really sure ,, not familiar with that os.. here's their help pg:
http://www.microsoft.com/ntserver/ProductInfo/default.asp

if you have system restore turn it down to 5%.. remove programs onto disk.. buy a removable hard drive?? UPgrade!! lol

http://hotspots.81x.com
 

2 more replies
Answer Match 63.84%

hi

My computer works on XP SP2 I was getting updates usually and it was going fine. But suddenly one day I had a pop up saying that my updates are ready to install I tried installing but it didn't install and the following is the error report:

Some updates could not be installed

Security Update for Windows Media Player 10 for Windows XP (KB936782)
Security Update for the 2007 Microsoft Office System (KB956828)
Security Update for Windows XP (KB923561)
Cumulative Security Update for Internet Explorer 6 for Windows XP (KB963027)
Security Update for Windows XP (KB956802)
Update for Microsoft Office Outlook 2007 Junk Email Filter (KB962871)
Security Update for Windows XP (KB960803)
Security Update for Microsoft Office Excel 2007 (KB959997)
Security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1 (KB928366)
Security Update for Windows XP (KB952004)
Security Update for Windows XP (KB956572)
Windows Malicious Software Removal Tool - April 2009 (KB890830)
Windows Internet Explorer 7 for Windows XP
Security Update for Windows XP (KB961373)
Security Update for Windows XP (KB959426)

And even when i tried to shut I see the symbol which represents updates ready when i click turn off button it doesn't install any updates it just turns off and the next day i see the same updates.

I need some help in this matter
 

A:XP updates not installing

Change the update options to prompt you for install. When it does say they are ready for installing you should be given the options of 'express' or 'custom' install. Click on custom install and just try running a couple of updates through or even just one. If this works proceed to install the updates in small chunks and let us know what happens.
 

3 more replies
Answer Match 63.84%

Hello everyone, I've been having this issue for quite awhile now, and just letting it go by, but now it's starting to really become an issue I think. I have several updates in windows that will just NOT update. Looking at the update history it started back in December. I'm not very computer savvy, my machine is mostly for gaming, and it now seems to be dragging my games down. I know there is gonna be additional information needed, but if anyone could help me figure out how to get these things to install, and get my machine back to properly auto-installing updates, it would be greatly appreciated.

Also, around the same time as these updates stopped installing, I have completely lost the bookmark feature in Firefox, all my old bookmarks are gone, and I can click to bookmark something, but it doesn't do anything. Not sure if this is related, but it started around the same time.

I am currently running Windows Vista 32 bit SP2, and I run it in classic view. The updates that are refusing to install are;

Cumulative Security Update for Internet Explorer 7 for Windows Vista (KB976325)
Microsoft .NET Framework 1.1 SP1 Security Update for Windows Vista and Windows Server 2008 (KB979906)
Microsoft .NET Framework 3.5 Family Update (KB959209) x86
Security Update for Windows Vista (KB974318)
Update for Windows Vista (KB970430)
Update for Windows Vista (KB971737)

I was guessing that it was the .NET framework that makes my computer feel like it's just dragging, but I wa... Read more

A:Updates not installing

Windows Update Troubleshooting
http://www.carrona.org/winupdat.html

2 more replies
Answer Match 63.84%

OK When i click the turn off computer button it is supposed to install an important security update. The update thing never goes away even though it looks like the update has been installad. Any help is appreciated

Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.5730.0011)
 

A:Installing Updates

these things tend to sort themselves out however do you know which update it is?
 

3 more replies
Answer Match 63.84%

I have 7 updates for win7 .when I update this it said installed then when I restart in said failed every time
Sec update for win7 KB971468
KB975560
KB977165
KB978251
update for IE8 Compat listKB978506
Update for Windows 7 (KB976972)
.
update for wind7 KB977074

do i need them and if i do how can i do this.Thank You.

A:updates not installing

First try easy methods:

1.Uninstall all 3p security software
2.Try install these hotfixes from Microsoft Download Center
3.go to Control Panel>>Troubleshooting>>System and Security>>Fix Problems with Windows Update
4.Try reregister WU in aggressive mode How do I reset Windows Update components?

5.Try reregister WU libraries Repair & Fix Windows Updates with Fix WU Utility | The Windows Club

If easy methods fail too,follow to below steps:

1.Run cmd.exe with administrative previlliges (right click on cmd.exe) as admin and type:

sfc /scannow

2.Run Readiness Tool Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, for Windows 7, and for Windows Server 2008 R2
even if this tool don't solve problem it create CheckSur.log file in C:\Windows\Logs\CBS folder
3.Download firegenul Altair Technologies Ltd.
place firegenul.exe in C:\Windows\System32

next again run cmd.exe with admin previlliges and type:

firegenul

it creates report from WindowsUpdate.log and is saved to C:\Windows\System32 as FireGenReport.htm
4.Prepare log from VistaSysInfoTool VistaForums SysInfo Tool
5.Find CBS.log file from C:\Windows\Logs\CBS folder

all files CBS.log,CheckSur.log,firegenReport.htm and log from VistaSysInfo pack to ZIP format and attache to post

3 more replies
Answer Match 63.84%

hi

i just finished building this pc and am trying to update windows and get all the security updates, they all installed upto now and i cant install any of the new ones or internet ex 7, i allso dont get any error messages it just says;
"the following updates were not installed"
Security Update for Windows Media Player 10 for Windows XP (KB936782)
Windows Internet Explorer 7 for Windows XP

i tried all the solutions here http://support.microsoft.com/kb/917925
apart from part E as there wasnt a file with that name to find.

I had some hardware problems with my ram during instalation that i have since fixed, but was thinking it might have caused a problem and a repair instal of indows might be a good idea.

Hope somebody can help,
many thanks
tom

A:Updates not installing

SP3 update problem strikes again,

Try this:

1. Re-register the Windows Update DLL with the commands below

Click Start, click Run. or Windows key + R (faster)

Copy and paste each of the following commands. Press ENTER after each command.

regsvr32 wuapi.dll
regsvr32 wuaueng.dll
regsvr32 wuaueng1.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wups2.dll
regsvr32 wuweb.dll

Restart computer.

Then run the update again . .

5 more replies
Answer Match 63.84%

Whenever i shutdown, there are 18 updates that keep trying to be applied. This has been going on for about 1 week - 10 days. I'm tired of it. I read that you can look at some updates log and hide them but where can i access this? It's pretty irritating and i would like to have them install correctly if they are crucial.

More replies
Answer Match 63.84%

I have vista home premium on a 1.6 hz dual core with 1 gig of ram
Everything was fine for the first 18 mths I had the system.
Now I keep getting a message that updates can't be checked for.
Also when I manually try to update receive error messages primarily 80244019 and 80072EFE (both unknown error messages)
When I try to access the microsoft update site I get a message saying that site is not on the server.
Can anyone please help me.
 

A:MS updates not installing

Resetting your modem might help you
 

3 more replies