Tech Problem Aggregator

Failed IE9 Cumulative Security Update, error 80242016

Q: Failed IE9 Cumulative Security Update, error 80242016

Hello sevenforums, Today I installed 8 important updates one failed - "Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2898785)". I use firefox should I ignore the failed update or make sure that it is installed properly so I don't cause future problems. The update is "Important" it says so i the view installed updates.

One of the 8 updates was - "Internet Explorer 11 for Windows 7 for x64-based Systems" I uninstalled IE11 because it messed up my weather desktop gadget, and I didn't plan on using IE11.

I tried the standalone installer for the failed updated and got the "this update is not applicable to your computer" message. The only thing I can think of doing now is using system restore and trying to install the updates again. My antivirus was not disabled during the installation of the updates. Should I disable it? It never caused problems with any of my previous updates.

Thank you for any help.

Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2898785)

Installation date: ‎12/‎10/‎2013 11:46 AM

Installation status: Failed

Error details: Code 80242016

Update type: Important

A security issue has been identified in a Microsoft software product that could affect your system. You can help protect your system by installing this update from Microsoft. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article. After you install this update, you may have to restart your system.

More information:
MS13-097: Cumulative security update for Internet Explorer: December 10, 2013

Help and Support:
Microsoft Support

A: Failed IE9 Cumulative Security Update, error 80242016

Sorry - seems your post got lost in the rush!


Please follow the Windows Update Posting Instructions and post the requested data

1 more replies
Answer Match 107.52%

I've been dealing with this for some time and have been using another browser in the meantime. I also tried to install IE10 with the same problem. Also tried to uninstall IE9 but could not even do it manually. The IE9 security update failures began with KB2817183 and have continued through KB2829530 released on 5/14/2013. Other Windows updates that come up appear to work OK. I have run the sfc /scannow tool and the system update readiness tool and find a list of 4 unavailable repair files in the CheckSUR file. Ultimately I want to update to IE10 but am guessing that I will need to fix these files before that can happen. I have pasted the CheckSur file here for convenience but also have attached a zip file of all the CBS log files. Any help or suggestions will be greatly appreciated. Thanks!
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 18.0
2013-05-21 13:23

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
(f) CSI Manifest Failed Catalog Check 0x00000000 winsxs\Manifests\amd64_microsoft-windows-ie-runtimeutilities_31bf3856ad364e35_9.4.8112.16464_none_bc19a9c95f45aeb7.manifest amd64_microsoft-windows-ie-runtimeutilities_31bf3856ad364e35_9.4.8112.16464_none_bc19a9c95f45aeb7
(f) CSI Manifest Failed Catalog Check 0x00000000 winsxs\Manifests\amd64_e... Read more

A:Failed Cumulative Security Update IE9 Win7 Pro SP1 x64; Error 80073712

Hello jacriverlea and welcome to the forums

Windows Update Package Replacement
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Please download the attached file, Packs.zip and save this to your Desktop.
Right-click on the file and select Extract All...
Tick the box labelled Show extracted files when complete then click Extract
A window will open showing two folders, Manifests and Packages
Open the Manifests folder and copy the files into the following folder (if there are any files)
C:\Windows\Temp\CheckSur\Winsxs\Manifests

Open the Packages folder and copy the files into the following folder (if there are any files)
C:\Windows\Temp\CheckSur\Servicing\Packages

Run the System Update Readiness Tool (SURT) again
When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:
C:\Windows\Logs\CBS\CheckSUR.persist.log
Tom

3 more replies
Answer Match 95.34%

IE 11 cumulative security update for Windows 7 fails to configure after reboot. It then reverts and restarts. Everything else appears to be operating normally. 
 
This is the only update that fails to configure. Install finishes without error, but it won't configure on the boot. 
 
Tried (not in this order):
   Removed IE 11 and added it back through WIndows update. 
   Reset Windows update components. 
   Downloaded and installed update specifically (KB2909921). 
   Ran the "Fix it" (it says it fixes a few things, but doesn't change the problem)
   Installed update with Trend Micro turned off
   *probably other things I can't recall, because I've been at it for too long. 
 
**I have limited time with this machine, because it is otherwise perfectly functional. 

More replies
Answer Match 94.5%

having problems with the update: code error 80073712

A:cumulative security update failed for IE11 for windows 7 64bit

You have a large number of Manifest file problems.

Please download and save the CheckSUR tool from http://support.microsoft.com/kb/947821
(you'll need to look in the details for Windows 7, downloading from the Microsoft Download Center)

Run it - The tool can take anywhere from 5 mins to a couple of hours to run (or 'Install') depending on how much it has to do, and may exit silently - it may appear to freeze for most of that time, but be patient.
The result is logged in the C:\Windows\Logs\CBS\CheckSUR.log file - and an archive …\checksur.persist.log file

Then zip the CheckSUR.log and upload it to your reply.

2 more replies
Answer Match 87.78%

I'm having no luck installing KB2977629 (Cumulative Security Update IE11). I repeatedly get the error 8007371B.

SURT installs with no errors. SFC /SCANNOW runs with no errors. I am uploading the requested screenshots and ZIP file.

Any help would be appreciated.

Thank you!!!!

PS- well, I WAS uploading. My screencaptures upload great, but my CBS.zip fails with "Server error 500".
My zip file is 9.6mb-- over the 8mb limit. What can I delete from the directory to get under the 8mb limit?


Attachment 333111
Attachment 333112

A:Update Error Code 80073712-Cumulative Security Update IE11, Win 7(64)

I've found a way to get the CBS zip uploaded. I divided it into 4 parts. All of the CBS folder's files are included. Sorry I didn't see this earlier.


Attachment 333122
Attachment 333123
Attachment 333124
Attachment 333121

1 more replies
Answer Match 85.68%

I can't install Cumulative Security Update for IE7 for Windows Vista x64- based Systems (KB969897) and I'm using IE7. Failed Errors found, Code 8007371C . It says Important Update. It says Windows Update encountered an unkown error. Appreciate any help Thank You.

A:Cumulative Security Update error code 8007371C

Download this hotfix from Microsoft Download http://www.microsoft.com/downloads/d...displaylang=en
and install it in safe mode

7 more replies
Answer Match 85.26%

Just did a reinstall of my OS. All but 6 updates succeded. Windows 7 SP1
 
Failed:
error code: 80070308
KB2965788
KB2923545
KB2984981
KB3025390
error code: 80242016
KB2952664
KB2598845
Tried the windows tool to fix windows updates but didn't work.
 
edit: typo

A:5 Updates failed to install. Error codes 80070308 & 80242016

Hi greymatters It's normal for certain Windows Updates to fail when you install all of them at the same time. Did you try to install them individually or at least bit by bit and not all of them together?

11 more replies
Answer Match 84.84%

Hey all, I got an ERROR 80070057 For Cumulative Security Update for Internet Explorer 8. There is a screenshot in the attatchment does anyone know how to fix this error?. I found many Vista users on Google having the same problem, no fixes for Windows 7... thanks in advance!.

A:ERROR 80070057 For Cumulative Security Update for Internet Explorer 8

Welcome to Seven Forums voodoochild16. What is the KB# of the specific update. Did other updates work, and only that one fail? A Guy

1 more replies
Answer Match 81.9%

Dell Studio laptop running Vista home premium SP2. Was prompted for 3 updates from MS yesterday, on reboot system blue screens and I have to recover to the point prior to the updates. 2 of the updates are failing with error 80242016. I tried this several times with the same result. In searching it appears this is a fairly common error in Vista updates but I can not find any solutions. Does anyone know what an 80242016 error means?

I also emailed MS update support, maybe they will provide something useful. If so I will post it here.

Thanks

A:Vista Update Error 80242016?

Have a look in the windowsupdate.log in C:\Windows and search for the error - it may give more information.
Another thing I have tried successfully is to download the Kbxxxx update executable from the windows site and execute it - it often gives you a more detailed reason for the failure e.g. permission problems on a particular file - you then have to use regedit and fix the permissions, run the executable again and it will either run or you have to regedit and fix more permissions until it does run (tedious)!

1 more replies
Answer Match 80.22%

Windows Update installation of Win7 SP1 (updating existing version of 6.1.7600.16385) reports the install as successful until reboot, then says successful and unsuccessful in the same dialog box. Error ID is 80242016. Subsequent run of windows update shows SP1 not installed. Problem repeats, even after following all steps in troubleshooting, including running the recommended hot fix for KB 947821, troubleshooting, & turning off anti-virus. Also, the windows update troubleshooter identifies my system as AMD64 architecture even though it is Intel I7 2600K. System infomation id's the CPU correctly. Any suggestions? System MB is ASUS P8P67 PRO, 16GB memory, AMD Radeon HD 6800 Series video card.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, 64 bit
Processor: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 8
RAM: 16360 Mb
Graphics Card: AMD Radeon HD 6800 Series, 1024 Mb
Hard Drives: C: Total - 1907626 MB, Free - 1744588 MB;
Motherboard: ASUSTeK COMPUTER INC., P8P67 PRO
Antivirus: Norton Internet Security, Updated and Enabled
 

A:Windows update install of Win 7 SP1 fails with error 80242016

Not the same symptoms, but check out this sticky thread to see if anything there works for you.
 

1 more replies
Answer Match 79.38%

I can't shut down my pc, it goes in log off mode => shut down and remains like this indefinitely. I can only shut down the pc properly in safe mode. I think the problem is with the windows update installation. I downloaded the update from the microsoft site to try and install it manually but it can't be installed in safe mode, and in normal mode it requests restart to complete and the restart never works, please help me!!!

Details:
Update for Windows 7 for x64-based Systems (KB2533552)
Installation status: Failed Error details: Code 80242016 Update type: Important

A:Update for Windows 7 for x64-based Systems(Error code 80242016)

It seems like you have a software preventing Windows from shutting down properly.
Follow this tutorial and (you can do it in safe-mode as well) in-order to achieve a clean startup,
in-order for the changes to take place you need to restart the PC after completing,
once booted wait a couple of minutes for the OS to boot-up completely and shutdown Windows normally.
If that does it great, if not report back.
Troubleshoot Application Conflicts by Performing a Clean Startup

2 more replies
Answer Match 78.54%

Please see below:

I have been trying for over more than a week to install this update without luck, like so many others it seems!
At the weekend it completely crashed my machine and I couldn't start Windows at all but I was saved by a Reflect image backup.
Now when it downloads the update it winds it back on startup.
I have been trying to follow guidance on the issue but with no luck and now not sure what I have or haven't done!
The machine is a recent rebuild from scratch, free from nasties and sfc reveals no file issues.
I have a second machine of a similar build and that updated without problem.
Can someone please provide me with some structured help.
I don't seem to be getting automatic notifications when I post on this site, any thoughts to resolve that so that I know when a response has been provided? I will keep coming back to check.
Thanks
Paul
PS just ran the WindowsUpdateDiagnostic tool and got the following but not sure if it's relevant:

A:Failed Cumulative Update KB3194496

If you haven't already try the tutorial below and hope it helps

Fix: KB3194496 (Windows 10 build 14393.222) fails to install

1 more replies
Answer Match 77.7%

Hi friends,
This the first time am having an issues with the update center.
the rest of updates from today (Office 16) were fine.
Once again when am trying to install KB3124263 - am stuck at Getting Windows ready after performing Windows update.
the only way to get rid of it (after 30 min) is to press the RESET button.

Tried sfc /scannow => CBS.Log

......................
2016-01-16 12:41:37, Info CSI 00004f4f [SR] Verify complete
2016-01-16 12:41:37, Info CSI 00004f50 [SR] Repairing 1 components
2016-01-16 12:41:37, Info CSI 00004f51 [SR] Beginning Verify and Repair transaction
2016-01-16 12:41:37, Info CSI 00004f52 Hashes for file member \??\C:\WINDOWS\SysWOW64\opencl.dll do not match actual file [l:10]"opencl.dll" :
Found: {l:32 vWh+Aagi7wmt066CrcoQZCog+Hd1BxBdtaVBb60iWgk=} Expected: {l:32 9rnAnuwzPjMQA7sW63oNAVhckspIngsqJXKYSUeQ5Do=}
2016-01-16 12:41:37, Info CSI 00004f53 [SR] Repairing corrupted file [l:23 ml:24]"\??\C:\WINDOWS\SysWOW64"\[l:10]"opencl.dll" from store
2016-01-16 12:41:37, Info CSI [email protected]/1/16:10:41:37.522 Primitive installers committed for repair
2016-01-16 12:41:37, Info CSI 00004f55 [SR] Repair complete
2016-01-16 12:41:37, Info CSI 00004f56 [SR] Committing transaction
2016-01-16 12:41:37, Info CSI 00004f57 Creating NT transaction (se... Read more

A:KB3124263 - Cumulative Update Failed to Install

Hello

From the CBS log it looks as if the repair was to an opencl.dll file which is not related to a windows update but usually to do with graphics cards such as nVidia cards which change the opencl.dll file.

Have you still got problems trying to install KB3124263? Quite often these problems sort themselves out after a day or two.

more replies
Answer Match 77.7%

Hi friends,
This the first time am having an issues with the update center.
the rest of updates from today (Office 16) were fine.
Once again when am trying to install KB3124263 - am stuck at Getting Windows ready after performing Windows update.
the only way to get rid of it (after 30 min) is to press the RESET button.

Tried sfc /scannow => CBS.Log

......................
2016-01-16 12:41:37, Info CSI 00004f4f [SR] Verify complete
2016-01-16 12:41:37, Info CSI 00004f50 [SR] Repairing 1 components
2016-01-16 12:41:37, Info CSI 00004f51 [SR] Beginning Verify and Repair transaction
2016-01-16 12:41:37, Info CSI 00004f52 Hashes for file member \??\C:\WINDOWS\SysWOW64\opencl.dll do not match actual file [l:10]"opencl.dll" :
Found: {l:32 vWh+Aagi7wmt066CrcoQZCog+Hd1BxBdtaVBb60iWgk=} Expected: {l:32 9rnAnuwzPjMQA7sW63oNAVhckspIngsqJXKYSUeQ5Do=}
2016-01-16 12:41:37, Info CSI 00004f53 [SR] Repairing corrupted file [l:23 ml:24]"\??\C:\WINDOWS\SysWOW64"\[l:10]"opencl.dll" from store
2016-01-16 12:41:37, Info CSI [email protected]/1/16:10:41:37.522 Primitive installers committed for repair
2016-01-16 12:41:37, Info CSI 00004f55 [SR] Repair complete
2016-01-16 12:41:37, Info CSI 00004f56 [SR] Committing transaction
2016-01-16 12:41:37, Info CSI 00004f57 Creating NT transaction (se... Read more

A:KB3124263 - Cumulative Update Failed to Install

Hello

From the CBS log it looks as if the repair was to an opencl.dll file which is not related to a windows update but usually to do with graphics cards such as nVidia cards which change the opencl.dll file.

Have you still got problems trying to install KB3124263? Quite often these problems sort themselves out after a day or two.

0 more replies
Answer Match 76.86%

Now I go to updates and I get this Error can any one help please

Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3176495) - Error 0x80070015

A:Cumulative Update for Windows 10 Version 1607 Failed

Solved

Downloaded this tool
https://support.microsoft.com/en-us/...troubleshooter

go to Settings update Advanced options click Give me update from other Microsoft //////

it worked

1 more replies
Answer Match 76.02%

Hi,
The Cumulative Update for Windows 10 Version 1511 (KB3116900) Failed to Install,
It showed a split second error code on the windows loading screen (The black Screen with windows logo and the loading dots.) and then on the second screen it said windows couldn't install this update, rolling back changes and things and went back to desktop and in Updates the Update is listed as "Failed to Install"

I tried the normal measures of Disable Av and Trouble shoot the Updater.
If any one has any other ways to get this update installed, then please share.
Update : Found out the error code which it shows up

Code:
Fatal error C00000D4 applying update operation 94 of 1912 (iexplorer.exe)

A:Cumulative Update for Windows 10 Version 1511 (KB3116900) Failed.

The same update caused my wifi to be unstable

0 more replies
Answer Match 73.5%

Hiya

A remote code execution vulnerability in a component of Outlook Express could allow an attacker who sent a Windows Address Book file to a user of an affected system to take complete control of the system.

If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less affected than users who operate with administrative user rights.

Affected Components:

• Outlook Express 5.5 Service Pack 2 on Microsoft Windows 2000 Service Pack 4
• Outlook Express 6 Service Pack 1 when installed on Microsoft Windows 2000 Service Pack 4
• Outlook Express 6 on Microsoft Windows XP Service Pack 2
• Outlook Express 6 on Microsoft Windows XP Professional x64 Edition
• Outlook Express 6 on Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1
• Outlook Express 6 on Microsoft Windows Server 2003 x64 Edition
• Outlook Express 6 on Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft Windows Server 2003 with SP1 for Itanium-based Systems

http://www.microsoft.com/technet/security/Bulletin/MS06-076.mspx

Regards

eddie
 

More replies
Answer Match 73.5%

Hiya

A remote code execution vulnerability exists in Internet Explorer due to attempts to access previously freed memory when handling script errors in certain situations. An attacker could exploit the vulnerability by constructing a specially crafted Web page. If a user viewed the Web page, the vulnerability could allow remote code execution. An attacker who successfully exploited this vulnerability could take complete control of an affected system.
A remote code execution vulnerability exists in the way Internet Explorer interprets certain DHTML script function calls to incorrectly created elements. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could potentially allow remote code execution if a user viewed the Web page. An attacker who successfully exploited this vulnerability could take complete control of an affected system.
An information disclosure vulnerability exists in Internet Explorer in the way that drag and drop operations are handled in certain situations. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could allow for information disclosure if a user viewed and interacted with the Web page. An attacker who successfully exploited this vulnerability would be able to retrieve files from the Temporary Internet Files (TIF) folder on a user’s system.
An information disclosure vulnerability exists in Internet Explorer in certain scenarios where the path to the cached ... Read more

More replies
Answer Match 72.66%

Cumulative Security Update for Internet Explorer 10 for Windows 8 (KB2838727) isn't working very well on my laptop.
On installing this, after rebooting I'm a stuck on blue screen saying that the PC has encountered an error and needs to restart. It also shows an error code like 0xc000021a. While that message is displayed, a percentage meter goes to 100 and the PC is automatically rebooted.

Then it tries to diagnose and repair but fails and says that the PC could not be repaired and a Srt log file is saved.

Then the only thing which saves me is going to the Advanced Options within that recovery mode and restoring a system point.
Can someone help me on this? What exactly in this update is crashing my PC?

I had opened a similar thread in the BSODs category of the website, but now that I have realized that it's more related to a Windows Update I'm opening a thread here.

Thanks.

Regards,
Abhishek Sharma

A:Cumulative Security Update (KB2838727) causing crashes

You might want to check this link: KB2838727 and KB2845533 gives error code: 80073712 - Microsoft Community

4 more replies
Answer Match 72.66%

Dear support forum boards.
we have got lots of users in our business were this update fails but it also takes down all of the other updates that are due with it, is anyone else having the problem
KB3124275
https://technet.microsoft.com/en-us/.../ms16-001.aspx

A:Cumulative Security Update for Internet Explorer (3124903)

I have KB3124275 on two system without any problems.

Windows 7.64 Pro/SP-1 and Home Premium/64-SP-1. Both use I.E. 11.

What business are you in?

1 more replies
Answer Match 72.66%

Hiya

Sticking this one in here, for a week

This is two fold:

A vulnerability exists in ISA Server 2000 because of the way that it handles malformed HTTP requests. An attacker could exploit the vulnerability by constructing a malicious HTTP request that could potentially allow an attacker to poison the cache of the affected ISA server. As a result, the attacker could either bypass content restrictions and access content that they would normally not have access to or they could cause users to be directed to unexpected content. Additionally, an attacker could use this in combination with a separate Cross Site Scripting vulnerability to obtain sensitive information such as logon credentials.

An elevation of privilege vulnerability exists in ISA Server 2000 that could allow an attacker who successfully exploited this vulnerability to create a NetBIOS connection with an ISA Server by utilizing the NetBIOS (all) predefined packet filter. The attacker would be limited to services that use the NetBIOS protocol running on the affected ISA Server.

Affected Software:

• Microsoft Internet Security and Acceleration (ISA) Server 2000 Service Pack 2
Note The following software programs include ISA Server 2000. Customers who use these software programs should install the provided ISA Server 2000 security update.
• Microsoft Small Business Server 2000
• Microsoft Small Business Server 2003 Premium Edition


http://www.microsoft.com/technet/security/Bulletin/MS05-034.mspx

Rega... Read more

A:Cumulative Security Update for ISA Server 2000 (899753)

unsticking now
 

1 more replies
Answer Match 72.66%

I contacted MS tech support Wednesday and the support tech was unable to resolve the issue after deleting my update logs and running some utility software. The case was escalated Yesterday, the level two tech indicated that some services were corrupted and just initiated a repair install. I just completed the repair install with all the updates and the issue is still not resolved. My update that keeps failing is also called cumulative security update for internet explorer 11 for windows 7 64-bit (KB3038314)

A:cumulative security update for internet explorer 11 for windows 7

As ThrashZone and Ex_Brit commented: hide them and be done with the annoyance.

2 more replies
Answer Match 72.66%

I can't get the Cumulative Security Update for Internet Explorer 11 (KB3038314) to install. I keep getting an error that is 80092004.

Is there a workaround for this issue?

A:Cumulative Security Update for Internet Explorer 11 (KB3038314)

I'm having the same problem on my notebook.

9 more replies
Answer Match 72.66%

Cumulative Security Update for Internet Explorer 7 for Windows XP (KB942615)

The above update keeps failing when I try to install it. Have waited a few days in between in case it was corrupt and had to be fixed. Still no joy. Is it just my laptop or is anyone else having this issue?

Thanks,
 

A:Unable to install latest IE Cumulative Security Update

7 more replies
Answer Match 71.82%

Okay I just had my son build me a new coimputer and installed my windows xp pro on it and downloaded sp3 everything went fine and then I got a messge that I had an update to install whic is the title of this thread and it fails and gives me an error code. Whats going on and what do I need to do to fix this. Your help would be appreciated very much.

A:Cumulative Security Update for Internet Explorer 7 for Windows XP (KB961260

YOu have to post here the exact error message and associated code when the update fails so that someone can look it up for you on the MS website or on google and suggest solutions to resolve the issue. Also take a look at the section "how to obtain help and support..." on this website.

1 more replies
Answer Match 71.82%

Hi,

I am having problems installing the update in the subject cited as I keep getting the message below, even after repeated attempts:.

"The Version of Internet Explorer You Have Installed Does Not Match The Update You Are Trying To Install"

( You may also view the screen shot attached )

And the IE7 setup version Ihave is

IE7-WindowsXP-x86-enu , File Version 6.2.29.0

Coudl someone help me with the installation of the security update?

Thanks

A:Cumulative Security Update for Internet Explorer 7 for Windows XP (KB963027)

Try to manually install/reinstall IE 7, reboot, and run update.

2 more replies
Answer Match 71.82%

Hi,

I was recently having problems with my computer, esp quicktime and some plug-ins. I kept getting buffer overrun errors.

I finally decided that it would be best if I ran trend house micro, and this is the error I got.

I went to the microsoft web page and I was confused on what and what not I should download.



(MS07-016) Cumulative Security Update for Internet Explorer (928090)

Transfering more information about this vulnerability...
An error occured while trying to retrieve more information about this vulnerability. There is currently no more information available.
(CVE-2006-4697, CVE-2007-4697) COM Object Instantiation Memory Corruption Vulnerability A remote code execution vulnerability exists in the way Internet E...
More information about this vulnerability and its elimination.
Affected programs and services: Microsoft Internet Explorer 6.0 (Microsoft Windows Server 2003)
Microsoft Windows 2000 Server Service Pack 4
Microsoft Windows Server 2003
Microsoft Windows XP Service Pack 2
Microsoft Windows Server 2003 for Itanium-based Systems
Microsoft Internet Explorer 6 Service Pack 1 (Microsoft Windows 2000 Service Pack 4)
Microsoft Internet Explorer 6 for Microsoft Windows XP Service Pack 2
Microsoft Windows XP Professional x64 Edition
Microsoft Windows Server 2003 Service Pack 1
Microsoft Windows Server 2003 with SP1 for Itanium-based Systems
Microsoft Windows Server 2003 x64 Edition
Microsoft Internet Explorer 6.0 (Microsoft Window... Read more

A:(MS07-016) Cumulative Security Update for Internet Explorer (928090)

Hello Qwertyrow and welcome to TSF, maybe I'm missing something but what exactly is the error that you're receiving. Is it a BSOD, Stop error? Please be as precise as possible.

6 more replies
Answer Match 71.4%

I have been getting help from Arc over on the BSOD section of this forum site for a few weeks now. I figured I'd start a thread here about the update troubles I've been experiencing over the past few days as well. There is one update that won't apply no matter what I try. I've run the amalgamated .bat tool posted on this forum and that didn't solve my issue. I will let my logs and screenshots speak for themselves from here, though.

Thanks in advance for any help!

As stated in the title, error code is 80073712. Also, I can't seem to get my CBS logs to upload. I keep getting an internal server error about the resource not being available. The screenshot attached perfectly fine. I will try to either edit this post to add them or add them as a comment.

Attachment 298869

A:Security update failed, error code 80073712

Still can't get the CBS.zip to upload. I will attach a screenshot of the error page. I'll try it again later.

Attachment 298870

8 more replies
Answer Match 71.4%

This appears to be a language pack error. Failed to update error 00000002 What is that even mean? I typed in this error code here and get no matched results 130 views so far and no one has any idea? HeLp? And thank you!

A:Security Update for Microsoft .NET Framework 1.1 SP1 Failed error 2

try to disable the firewall, check if there is any other security software , you should not have more than 1 security software. email me if the problem persist again

3 more replies
Answer Match 71.4%

I've haven't been able to install this update 'Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2943357)'
It keeps coming up with an error code 80073712.

I am also getting an error 8004100E when trying to upgrade to Windows 10

Using the SUR tool I got the following log:

A:Security Update Failed Error code 80073712

You have rather a lot of errors there!

Code:
Summary:
Seconds executed: 124
Found 96 errors
CSI Manifest All Zeros Total count: 72
CBS MUM Corrupt Total count: 14
CBS Catalog Corrupt Total count: 10

Unavailable repair files:
winsxs\manifests\amd64_microsoft.transactions.bridge.dtc_b03f5f7f11d50a3a_6.1.7601.22733_none_65085bdd54b4a629.manifest
winsxs\manifests\amd64_wcf-m_sm_ins_rc_dll_31bf3856ad364e35_6.1.7601.22733_none_2795328d79930284.manifest
winsxs\manifests\amd64_wcf-system.runtime.serialization.ref_b03f5f7f11d50a3a_6.1.7601.22733_none_424d323c8e896dad.manifest
winsxs\manifests\amd64_wcf-icardres_dll_vista_31bf3856ad364e35_6.1.7601.18523_none_6f276a738180cba8.manifest
winsxs\manifests\amd64_wcf-system.servicemodel.ref_b03f5f7f11d50a3a_6.1.7601.22733_none_5ebf2b63339ef82d.manifest
winsxs\manifests\amd64_wcf-smdiagnostics_b03f5f7f11d50a3a_6.1.7601.18523_none_f5ee0756c06c09cd.manifest
winsxs\manifests\msil_system.runtime.serialization.resources_b77a5c561934e089_6.1.7601.22733_en-us_787b5545d9776103.manifest
winsxs\manifests\msil_smdiagnostics.resources_b77a5c561934e089_6.1.7601.18523_en-us_496526973f1e68f2.manifest
winsxs\manifests\amd64_wcf-m_sm_ins_rc_dll_31bf3856ad364e35_6.1.7601.18523_none_271663c8606d49a2.manifest
winsxs\manifests\amd64_microsoft-windows-wcfcorecomp.resources_31bf3856ad364e35_6.1.7601.22733_en-us_ff634b2369479517.manifest
winsxs\manifests\amd64_wcf-infocard_api_dll_31bf3856ad364e35_6.1.7601.18523_none_02011939c648dcfe.manifest
... Read more

9 more replies
Answer Match 70.98%

Cumulative Security Update for Internet Explorer 9 for Windows Vista (KB2559049)
Installation date: ‎18/‎08/‎2011 10:08
Installation status: Failed
Error details: Code 80070005
Update type: Important
Security issues have been identified that could allow an attacker to compromise a system that is running Microsoft Internet Explorer and gain control over it. You can help protect your system by installing this update from Microsoft. After you install this item, you may have to restart your computer.
More information:
http://go.microsoft.com/fwlink/?LinkID=221946
Help and Support:
Microsoft Support

Why o why is Microsoft so slapdash with its updates. The error code I am getting covers everything under the sun and offers no solutions to the problem.
I am so fed up following so many leads from its advice pages but can never get to resolving the problem. Is there anyone anywhere that has overcome this problem.
I am running Windows Vista Home Premium 32bit IE9.0.1

Thanks

A:Cumulative Security Update for Internet Explorer 9 for Windows Vista (KB2559049)

I can't help as I would also like to know the answer, but I can reassure you that you are not the only one with this problem.

2 more replies
Answer Match 70.98%

Recent (Oct 15th) huge number of security updates, caused grief on 32bit Vista SP2 which I have narrowed down to the IE8 Cumulative Security Update by a process of elimination re-applying patchsets & testing the box.

With IE8 cumaltive security, in Stage 3 of "Configuring Update" it seems to be stuck at 0%, the chime occurs, but after a while the screen blanks, and the hardware resets a little later causing a reboot.

Updated ATI Radeon Video driver to latest has been to no avail; the machine seems solid in use and is also running Linux (and updated an old install with 10 months of patches) perfectly. Checking BIOS & drivers are up to date hasn't turned anything up, and the box and install generally solid. I tried booting with 'Safe options' to configure the update, but that did not help, so it would appear unlikely the resets are a driver issue.

Whilst I have the system back through system restore to checkpoint before the update, and have now hidden this patch, this leaves me with an insecure IE8.

1) Can I report the problem with the update anywhere?
2) Could I obtain smaller patchsets to find the likely culprit?
3) Can I downgrade IE8 to IE7?

Obviously I can use FF-3.5 for normal browsing, but some Windows programs & sites try to force use of IE, so the security issue does matter. This has caused much inconvenience and time, to a relatively tech savvy user, so one would hope a cumumaltive patch becomes available which does not have t... Read more

A:Solved: Windows Cumulative Security Update IE8 - Causes Reboot during stage 3 configu

14 more replies
Answer Match 70.14%

hello guys, my laptop wont install this latest update by microsoft, it has tryed about twenty times now, Can anyone help.

windows vista premium.
 

A:Solved: Cumulative Security Update for ActiveX Killbits for Windows Vista (KB973346)

8 more replies
Answer Match 69.72%

Failed Cumulative Security Update IE11 Win7 Home Prem SP1 x64; Error 80073712
I've been getting this failed update since the Sept 2015 Cumulative Security Update for Internet Explorer 11, but I use Chrome instead since I can't install the security update. I tried to uninstall IE11, using two methods but that didn't work. The IE11 security update failures began with KB3087038 in Sept 2015 and have continued through KB3104002 released in Dec 2015 . Other Windows 7 updates that come up have been successful, except for the update to Windows 10 which also failed, starting in July 2015. I have run the system update readiness tool (took about 20 minutes) and sfc /scannow tool (took about 15 minutes) - it found some unrepairable components which I am uploading here; and also found a list of 9 CSI Manifest Failed Catalog Check items in the CheckSUR file. Eventually I want to update to Windows 10 but am guessing that I may have to fix these files before the upgrade will work. I have pasted the CheckSur file here for quick reference in case this may help. My CBS log zip file after compression is over 1GB so I am not sure what I should do.
If anyone can help me fix this, I would be very grateful!
Thanks.



sfcdetails.txt

CheckSUR.log

A:Failed Cum Security Update IE11 Home Prem SP1 x64; Error 80073712

Hopefully the problem is easy to solve. The next time that you get the update, right click on it. Then click on hide. You should not be bothered again.
(If the right click does not work try a left click)

4 more replies
Answer Match 68.04%

I've tried a hundred times and this update will not install.
Once it reboots and, it says reverting changes and reboots again. I've tried sfc /scannow, and the SURT.

Cumulative Security Update for Internet Explorer 11 for Windows 7 for x64-based Systems (KB2976627)

Installation date: ‎16/‎08/‎2014 11:45 PM

Installation status: Failed

Error details: Code 8007054F

Update type: Important

A security issue has been identified in a Microsoft software product that could affect your system. You can help protect your system by installing this update from Microsoft. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article. After you install this update, you may have to restart your system.

More information:
MS14-051: Cumulative security update for Internet Explorer: August 12, 2014

Help and Support:
Microsoft Support

A:Cumulative Security IE11 KB2976627 won't install error 8007054F

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

9 more replies
Answer Match 68.04%

I tried two times to update, but without any success (many updates before passed without a problem). At the end PC reported that there is a problem and showed for a short time a blue window with the error code and a link to a support. But time was too short to note it and I don't know where to find this report. Is it possible to find it?

More replies
Answer Match 66.36%

For some reason my Windows 10 Home (x86) fails to install the latest cumulative update KB3194798 that was released a few days ago. It fails every time with error 0x8e5e03fa. Manually downloading and installing it doesn't work either, that in turn fails without an error message at all (The following updates were not installed: Security Update for Windows (KB3194798))
Is there anything I can do to fix this?

More replies
Answer Match 63.42%

has any one had this error with windows update please? i ran the troubleshooter and it said it fixed problems for it

Update for Windows 7 for x64-based Systems (KB2387530)

Installation date: ‎22/‎02/‎2011 19:34

Installation status: Failed

Error details: Code 80242016

Update type: Recommended

A:Windows 7 SP1 installation Error details: Code 80242016

  
Quote: Originally Posted by brianzion


has any one had this error with windows update please? i ran the troubleshooter and it said it fixed problems for it

Update for Windows 7 for x64-based Systems (KB2387530)

Installation date: ‎22/‎02/‎2011 19:34

Installation status: Failed

Error details: Code 80242016

Update type: Recommended


Read here You cannot configure a Wi-Fi Protected Setup device from a computer that is running Windows 7. Has the cause and possible solutions.

9 more replies
Answer Match 62.58%

G'day,

I'm having some trouble installing the above update. I've run the MrFixIt utility, but still get an error trying to install this update. Can someone recommend a solution to try?

This is an Asus X54C netbook running a clean install of Windows 7 Professional x64 OEM.

Regards,
Golden


Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-HMV43-4VJP4-2XPD2
Windows Product Key Hash: ICzuR8ZBq92sVgVzcSnQ5UM+L3Y=
Windows Product ID: 00371-OEM-9315604-53606
Windows Product ID Type: 8
Windows License Type: COA SLP
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {D0A14F7A-EDF0-4626-917B-15BC07081EB5}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.120330-1504
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr ... Read more

A:Security Update (KB2709715) - Failed to Update, Code 8020000E

Solved by downloading and manually installing from here:
http://www.microsoft.com/en-us/downl....aspx?id=30103

3 more replies
Answer Match 62.16%

I have been having an issue installing an update in Windows Update for a while.
The update I am having issues with is:
 
Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista,     and Windows Server 2008 x86 (KB2833941)
Download size: 15.3 MB
You may need to restart your computer for this update to take effect.
Update type: Important
A security issue has been identified in a Microsoft software product that could affect your system. You can help protect your system by installing this update from Microsoft. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article. After you install this update, you may have to restart your system.
More information:
http://go.microsoft.com/fwlink/?LinkID=296794
Help and Support:
http://support.microsoft.com
 
Every time I try to install it it gives me this error:
 
   Code 643   Windows Update encountered an unknown error.
 
In event viewer it tells me this:
 

-

System


 

 


-

Provider


 

 

 

[ Name]

Microsoft-Windows-WindowsUpdateClient

 

 

 

[ Guid]

{945a8954-c147-4acd-923f-40c45405a658}



 

 

... Read more

A:Windows Update Failed - Security update for .NET framework

Try the Fix it at Microsoft Support.

6 more replies
Answer Match 61.74%

Greetings!
I have an Optiplex 9010 AIO. This morning I was trying to update the BIOS of my system, from A10 to A13. During the update process it showed an error: "ME FW Update Failed: Internal error: FWU_Buffer " - please see the photo below. Although the update failed on the Management Engine part, it still boots up and running OK. I tried couple of times to update the BIOS, and each time I got the same error. I tried to flash the A12 and A11 BIOS as well, A12 gives same error, and A11 has the same Management Engine version hence no use.
Any help on this is very much appreciated!

A:Optiplex 9010 AIO BIOS Update Error - ME FW Update Failed: Internal error: FWU_Buffer

Hi Stone3t,
Can you provide a screen shot showing the current BIOS version?

16 more replies
Answer Match 60.48%

Hi,

Like many folks using the Windows 10 Anniversary issue I am running into Windows Update problems. Up to around the 2nd week of September I was having no update issues whatsoever. Then along came (1) KB3189866 and it failed; then (2) KB3193494 a few days later and it failed; and the last one (3) KB3194496 failed too!

I am running Windows 10 Home, Version 1607, Build 14393.105 on an HP All-In-One HP Pavilion 23-g017c (x64) AMD A6-5200 APU w/Radeon HD Graphics, using the Edge Browser while utilizing Windows Firewall and Windows Defender as my major security programs.

It seems the only updates which fail during this period are the three listed above -- all Cumulative Updates for Win10, Version 1607 for x64-based systems.

I have run the Windows update tool several times and it finds things needing to be fixed. It says it has fixed them but updates still fail. I have tried the Windows Catalog and tried to manually install the first two but both of these manual attempts failed too. I tried finding the 3rd Cum Update in the Catalog and it said it couldn't be found. I have seriously thought about trying a computer Reset but after reading up on this I get sweaty palms ...lol

Just wondering if anyone has any ideas about why all three of these updates have failed.

Thanks and regards,
2harts4ever

More replies
Answer Match 60.06%

Hi, all!

I'm running Windows 7 Pro 64 bit, and I'm just trying to get a failed security update installed.

a few days ago through Windows Update did a routine download and install of of the monthly updates and patches. I got a message after the download and install procedure that one update had failed with the following message:

Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243)
Installation date: ‎6/‎12/‎2014 2:49 AM
Installation status: Failed
Error details: Code 643
Update type: Important
Help and Support:
http://go.microsoft.com/fwlink/?LinkId=216803

The support link takes me to:
http://support.microsoft.com/kb/2538243

At this point I can't seem to find the download link. Plenty of links to info I don't understand but I can't find where to manually download the failed update to try to re-install.

By going to Windows Update and clicking "view update history" it shows the failed update in the list.

Should I try to manually download and reinstall this update? If I can find where to download I'm assuming I should download the x64 version, correct?

This should be simple to correct but I'm not having any luck.

Thanks for your help.
 

A:Security Update Failed

The download links are on this page: https://technet.microsoft.com/library/security/ms11-025

find the text 2538243
 

2 more replies
Answer Match 59.64%

I installed Win 7 Pro (64-bit) on a brand new HDD today and after installation of hundreds of updates, I reviewed the update success/fail list. All were successful EXCEPT KB3008923, Cumulative Security Update for IE 9.

Error code is: 80242016

Is this something I should be concerned about? IE 11 was installed during the update process, but W7 Update tells me I need this IE9 update when I uninstall it. Re-installing still fails. Does successful install of IE 11 mean this update is not needed?

Ran the SURT and tried re-installing. Same fail. Ran the SFC /SCANNOW as suggested in the Update Forum posting instructions and there appear to be no issues identified.

Any suggestions?

A:Should I be concerned about failed Cum Security Update for IE9?

OK - there are no obvious problems showing in either CheckSUR or CBS logs.
The 80242016 error usually associated with connection problems - I suspect in your case that it's an internal problem.

Please post your C:\Windows\windowsupdate.log file, and I'll see if it gives me any clues as to what's happening.

4 more replies
Answer Match 59.64%

I've made several attempts to install the .NET security update KB2572078 on Windows 7 64-bit. I keep getting a failure:

Windows Update Error 800B0100

Windows Help and Support recommended running the System Update Readiness Tool. I ran the tool, got a message that it was successful, and the CheckSUR.log showed no errors. I then rebooted and attempted to install the .NET update again - got the same failure.

I Googled around for a solution, and found two. One suggested that I try to repair the .NET installation through Programs and Features, but that didn't work. The other suggested completely uninstalling the .NET framework using the .NET Framework Cleanup Tool, and then reinstalling the framework from the ground up. That sounds pretty scary and extreme to me.

I was wondering if anyone could help or had any additional insight. Thanks!
 

More replies
Answer Match 59.22%

Can't boot MEDION AKOYA 10" Notebook with SSD after failed Cumulative Windows 10 Update KB3194496

on 30 September an automatic Update started for Cumulative Windows 10 Update KB3194496 - after many hours the update was still on 45% download, and because I had to leave home, I cancelled Update, and shutdown Notebook. Next morning early wanted to try again.

Notebook would not boot!

following happens:

On pressing start button two of the three system lights show ?(WiFi and system/drive) and very briefly the usual word MEDION appears on screen - nothing else happens - power switches back off.

Battery is charged (and no low battery warning light - and both the Wifi and System/drive lights are clearly very bright)
Notebook also won't boot with charger plugged
Screen is working (the brief MEDION name)
SSD was installed Sept. 2015 - but Notebook used very little since then - so basically fairly new

Previous use of Notebook was the previous W10 Anniversary Update - after successful update Notebook was shutdown and not switched on again until 30 Sept and the failed KB3194496 update.

No viruses

No other problems before this (yeah - the MEDION AKOYA E1318T MD 99240 10" Notebook is a real crappy thing - but it was fully working without any problems before)

This is definitely connected to the KB3194496 download ( I also notice that my Desktop computer is not working as well after this update) (http://www.ghacks.net/2016/09/30/cum...omment-3987072)

But I have no idea what... Read more

More replies
Answer Match 58.8%

I just got this update and restarted my PC. Now Cortana is not there even after I set my region language and speech to united states. Help
Posted via the Windows Central App for Android

A:Cortana disappeared from anniversary update after getting the cumulative update 14393.10

Originally Posted by buddy007 I just got this update and restarted my PC. Now Cortana is not there even after I set my region language and speech to united states. Help
Posted via the Windows Central App for Android try a restart and check again
It does not appear in apps list?

4 more replies
Answer Match 58.8%

I received Microsoft updates Security Update for Microsoft .NET Framework, Version 2.0 (KB928365) and one other(actually 6 updates were recevied and only two remain to be troublesome.)


Security Update for Microsoft .NET Framework, Version 2.0 (KB928365) fails to install. Tried to restart computer by "Turn Off Computer" but XP tries to install the updates before shutting down. When I restart, the Update badge is present. When I run the updates, it fails to install.

Microsoft page says to remove update via "Add/Remove Programs" but it doesn't show up there (suspect that's because it failed to inistall.)

Microsoft page implies I should at .NET 2.0 so I tried updating my .NET 1.0.... Update failed.

Tried to install .NET 1.1 update.... install failed.

Seems I can't update .NET nor install the automatic security update nor eliminate the update icon.

Anybody care to comment??

Regards

figgepop

A:Failed Microsoft Security Update (KB928365)

Quote:





Originally Posted by figgepop


Anybody care to comment??




Only to say that the same has just happened to me, and I suspect others as well. If I find out what has happened I'll let you know.

19 more replies
Answer Match 58.38%

i keep getting these results when im trying to update windows. ive tried using the clean boot and i have the same problem. Ive deleted all the folders from SoftwareDistribution and then tried the update again and it doesnt work. can you plz help fix this issue.

A:security update for windows 7 for x64-based systems failed

Hello madeilobue , Welcome to the Forums In the posting instructions for this issue, did you run the SFC program, If so, list the results , or if not. please do so and post how that went please .

5 more replies
Answer Match 58.38%

Re: Security update for Microsoft Works 9 (KB2092914):
"Code 646 Windsows Update encountered an unknown error"
OS - Windows Vista Hme Prem 64 bit, Srvce Pk 2
(formerly srvce pk 1 from 03.12. 2010 post)

Hello,

I had a total of 15 important Windows Security updates installed one by one on:

08.11.2010 - 10 successful updates installed
08.12.2010 - 4 successful updates installed

Issue: Security update for Microsoft Works 9 (KB2092914)
Failed to install successfully

08.12.2010 - 4 attempts to download and install
08.16.2010 - 1 attempt to download and install
08.28.2010 - 1 attempt to download and install today



Kindly advise what to do next.

Thank you
neiani

P.S. Previous relevant post source for reference only:
6 important updates as of 03.12.2010

A:FAILED - Security update for Microsoft Works 9 (KB2092914)

Install update for MS Works from Microsoft Download Center (not from Windows Update) link:Download details: Security Update for Microsoft Works 9 (KB2092914)

10 more replies
Answer Match 58.38%

I cannot load any Security Update for Windows 7 for x64-based Systems. They keep failing. Tried troubleshooter fix and tweeking windows program. Any help would be appreciated.
 

A:Security Update for Windows 7 for x64-based Systems FAILED

Is this a Microsoft update?

6 more replies
Answer Match 58.38%

I'm having a little bit of trouble getting a specific update to install. As the title states the update failing to install is "Security Update for Windows Vista for x64-based Systems (KB941693)." I'm running Vista Ultimate x64 and have service pack 1 installed. I have tried to download the update directly from the Microsoft website and install it from the desktop but had no success. Any help or suggestions would be greatly appreciated. Thank you.

A:Security Update for Windows Vista x64 (KB941693) failed

Hi. . .

Welcome to TSF - Vista Support.

kb941693 pertains to Microsoft security bulletin MS08-025, issued on June 27, 2008, and deals with a security issue involving the kernel.

There should not be a problem installing this update, so I would ask how many times has it failed and have you had problems with other Windows Updates failing? Is there any error message or an error code resembling 0x00000000? When attempting the manual install are you logged onto a regular admin account? Have you ever activated the "hidden" admin account?

What anti-virus are you running, do you have a 3rd party firewall and is the Windows Firewall enabled? If there is a 3rd party firewall, disable it and re-enable the Windows firewall and reset it to default settings.

There are two logs that would contain information pertaining to Windows Updates:

c:\windows\WindowsUpdate.log
c:\windows\logs\cbs\cbs.log

The cbs log is ~ 20mb and the WU log is ~ >1mb. Follow the above advice then try the install of kb941693 again. If it fails, copy the 2 logs to your documents folder, zip them up and attach to a post. I'll then take a look to see if I can find any error message/code. You should also check the Event Viewer - Admin filtered log to start. Look at the events around the time of the failed install. To obtain additional information on an event, double-click on it.

There are of course various reasons that a Windows Update can fail; however, I usually find i... Read more

13 more replies
Answer Match 57.54%

Windows update is failed after install Bitdefender internet security.

The error code of windows update is 80246008, and the error code of background intelligent transfer service (BTIS) in eventviewer is 2147024894. So, I changed BITS into auto(delay), but BITS stops repeatedly when I was trying to perform windows update 5 times after rebooting.
 

A:Windows update is failed after install Bitdefender internet security

Did you try turning off Bitdefender and then try Windows update?
 

10 more replies
Answer Match 57.54%

Hello All!

I'm new to the Insider Program and am currently running build 10565 on one laptop and 10240 RTM on another. Quick question about getting updates on Insider builds - do I get cumulative & security updates that are available for the RTM version on my insider build? Just did some updates to my RTM but noticed that some of the newest updates like KB3097617 don't show on my 10565 build.

I manually downloaded the latest updates from Microsoft Catalog but when I tried to install them it said they are not applicable. Is it because insider builds already come with these security updates built in?

A:do I get cumulative & security updates

Some of those updates are already included in the 10565 build so they are not offered.

4 more replies
Answer Match 57.54%

For those who don't know a security patch for IE became available today. Take care! angelize56

http://www.microsoft.com/technet/treeview/default.asp?url=/technet/security/bulletin/MS02-023.asp
 

A:{New Cumulative} Security Patch for IE

16 more replies
Answer Match 57.54%

Hello everyone. I'm on 14393.51. After cumulative was done I opened MS Edge and noticed that Adblock Plus is not working. It's not hiding anything. Also look at the image below. Clicking update now is not working, is not doing anything.
Anyone else has the same problem?
Thank you.

More replies
Answer Match 57.54%

The KB3081424 have been rolled out today for Windows 10, and it's a Cumulative Update. It'll update a lot of files that are coming out in users' SFC and DISM scans as corrupted. Installing it could fix these files, so I suggest you to install it.Cumulative Update for Windows 10: August 5, 2015This update includes nonsecurity-related changes to enhance the functionality of Windows 10 through new features and improvements.Windows 10 updates are cumulative. Therefore, this package contains all previously-released fixes (see KB 3074683). If you have installed previous updates, only the new fixes that are contained in this package will be downloaded and installed to your computer.

A:[Update] Cumulative Update for Windows 10: KB3081424

Check your settings.  There are a lot of new settings in every category.  I only went through System and Privacy, so far.  Am taking a break now.  This stuff makes my eyes glaze over with all the bizarre organization, so I can't even tell you what the changes are. 

2 more replies
Answer Match 56.28%

I'm still not certain if the new builds that come out,( eg 10586.36, and now 10586.63) also contain
all the latest Windows security updates as well? (not referring to defender updates I know they are distinct)
I've noticed that my Windows 10 PC (which had 10 installed from new, it is NOT an upgrade) has the latest build
10586.63 but I don't see any separate windows security updates coming along with them. Is having the latest build number 10586.63 mean that the OS has all the up to date security updates as well, including the .net security updates....

Thanks for explaining.

A:Clarification...do the cumulative builds contain security updates?

Originally Posted by legacy7955


Is having the latest build number 10586.63 mean that the OS has all the up to date security updates as well, including the .net security updates....

Thanks for explaining.



I am not good in explaining this.
The answer, however, is .............................."yes" to cumulative updates.

1 more replies
Answer Match 55.86%

Hi All

Some of our client machine(Windows7) is not taking update from WSUS server. When we verified the WindowsUpdate logs, we could see that WU client version is changed to 7.6.7600.256 from 7.5.7601.17514.Our WSUS server is running with version WSUS 3.0 SP1 on windows 2003 server. So we suspect this may be the reason windows 7 machines is getting the error message 'Windows Update Client failed to detect with error 0x800b0001' when it try to get the update from WSUS server.

So please suggest any steps to change the WU client version on windows 7 back to 7.5.7601.17514

Please find the attached log file.

A:Getting the error Windows Update Client failed to detect with error 0x800b0001

Hi this is about your error Error code when you try to use Windows Update or Microsoft Update to install updates: "0x800B0001"

1 more replies
Answer Match 55.86%

If this topic is already posted......I will get this one removed.......otherwise...read on !!
 
 
http://www.infoworld.com/article/2973432/microsoft-windows/windows-10-patch-kb-3081444-service-packs.html

A:KB3081444..Cumulative update....and more !

I vote the naming as CumUpX.x, where 'x' is the number of the Cumulative Update -- and when it doesn't work, it's a comeuppance. 

1 more replies
Answer Match 55.86%

Hi All

Opened WIndows update today to check something, and it found KB3172985 and one Defender definitons update, but I installed the KB one on Tuesday, and restarted then, it was in successfully so why a second time?, says NO restart this time, and successfully installed

More replies
Answer Match 55.86%

I am getting the following updates on my laptop right now -
Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3176934).
Update for Windows 10 Version 1607 for x64-based Systems (KB3176936).
I am non Insider on 14393.51

A:Cumulative Update on my laptop

Same here Surface 4Pro

2 more replies
Answer Match 55.86%

i just installed google chrome from online installer and then i moved the file using application mover to the HDD.. then i pasted a symlink in "C:\Program Files (x86)\" ... "C:\" is the SSD where the windows and the drivers are installed.... when i turn on chrome everything works file.. but the updater doesn't work... when i try to update i get this:



can anyone help me get that fixed.. thanks!

A:Update failed (error: 3)An error occurred while checking for updates:

Just uninstall Chrome then install it directly to the destination you want it installed instead of moving it post installation.

3 more replies
Answer Match 55.44%

I am having Win 10 home version 1607 64-bit. While downloading KB31889866 through Windows Update it struck up at 45% for 3 hrs, now it has again struck up at 95% for >2hrs. If I download it from the Catalog site of MS using IE, it will download to a separate folder. How do I "Install" it subsequently?

A:How to install Cumulative Update KB3189866

In File Explorer go to the folder where it was downloaded. Double-click on the .msu file there to start the install. Mine was called windows10.0-kb3189866-x64_2c3e91a8162269579c8bf26a502c620d41efef0d.msu -yours may be a different name if you have the 32-bit version of Windows.

1 more replies
Answer Match 55.44%

Hello!

My test computer (specs follow) is stuck at build 10586.11 I cannot install any cumulative upgrade, they all fail and Windows Update undoes any change to the system. In order to be able to install any other update I have to use the show/hide tool to hide the cumulative updates. I don't know what's wrong. My main computer (see my specs) and several of my friends have no problem upgrading up to 10586.36, but this particular one fails for some reason. I already tried to disable some devices in Device Manager and disable some services and startup applications, nothing worked. So I decided to start this thread and include a log taken by the forum tool in case someone can shed some light to the issue and tell me what to do.

Thank you in advance.

Specs of my test computer that has the issue:

Computer: Custom-build server system
Motherboard: Supermicro PDSG4 (Intel socket 775)
Chipset: Intel Glenwood 955X (supports up to Pentium D dual-core CPU socket 775, not newer models)
CPU: Intel Pentium D 945 3.40GHz dual-core socket 775
RAM: 4GB DDR2 667MHz (4x 1GB modules in dual channel mode)
Graphics: XFX GeForce 7300GS
SATA Controller: Intel ICH7R with RAID support
SCSI Controllers: Adaptec 7901 Single channel Ultra 320 SCSI & Adaptec SCSI RAID 20105/Supermicro AOC-LPZCR supported
LAN: Intel 82573V PCI-E Gigabit Ethernet Controller
Audio: Realtek AC'97 audio high quality 6-channel sound
OS: Windows 10 Pro TH2 build 10586.11 32-bit English US

PS: Before you ask, I have alrea... Read more

A:Cannot install any cumulative update, other updates OK

Hi spapakons,

Please remove every crack/bypass on your system in order to proceed.
There are 2 main reasons,
1.




Troubleshooting a system with counterfeit programs is useless as it is not known what has been modified to your system.
A counterfeit program contains heavily modified code which causes the system to behave in unexpected ways.
For this reason, analyzing counterfeit systems is unreliable and most analysts won't try it.



2.
Forum rules





4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

0 more replies
Answer Match 55.44%

I am having Win 10 home version 1607 64-bit. While downloading KB31889866 through Windows Update it struck up at 45% for 3 hrs, now it has again struck up at 95% for >2hrs. If I download it from the Catalog site of MS using IE, it will download to a separate folder. How do I "Install" it subsequently?

A:How to install Cumulative Update KB3189866

In File Explorer go to the folder where it was downloaded. Double-click on the .msu file there to start the install. Mine was called windows10.0-kb3189866-x64_2c3e91a8162269579c8bf26a502c620d41efef0d.msu -yours may be a different name if you have the 32-bit version of Windows.

more replies
Answer Match 55.44%

This recent update

List of changes and fixed issues in the .NET Framework 3.5 Service Pack 1
makes reference to Firefox ;
 
http://support.microsoft.com/kb/951847
 

Issue 2
.NET Framework assistant for Firefox has the Uninstall button disabled. In the .NET Framework 3.5 SP1, the .NET Framework Assistant enables Firefox to use the ClickOnce technology that is included in the .NET Framework. The .NET Framework Assistant is added at the computer level so that its functionality can be used by all users at the computer level instead of at the user level. Therefore, the Uninstall button is unavailable in the Firefox Add-ons menu because standard users are not permitted to uninstall computer level components.
 
Actually, Am I suppose to or expected to understand this ?
 
I am only concerned that if I need the update, . . What am I doing to my computer ?
 
 
 
 
 
 
 
 
 
 
 

More replies
Answer Match 55.44%

Today we issued our Advanced Notification Service (ANS) to advise customers that we will be releasing security update MS10-018 tomorrow, March 30, 2010, at approximately10:00 a.m. PDT (UTC-8). MS10-018 resolves Security Advisory 981374, addressing a publicly disclosed vulnerability in Internet Explorer 6 and Internet Explorer 7. Internet Explorer 8 is unaffected by the vulnerability addressed in the advisory and we continue to encourage all customers to upgrade to this version to benefit from the improved security protection it offers.



Source -
The Microsoft Security Response Center (MSRC) : Internet Explorer Cumulative Update Releasing Out-of-Band

A:IE. Cumulative Update Releasing Out-of-Band

TY Jan, got the update and installed.

1 more replies
Answer Match 55.44%

New cumulative Update for windows 10 is now Live Bumping OS build to 14393.447
Changelog As follows : This update includes quality improvements and security updates. No new operating system features are being introduced in this update. Key changes include:
:>Improved the reliability of multimedia audio, Remote Desktop, and Internet Explorer 11.
:>Addressed issue that prevents users from connecting to a virtual private network (VPN).
:>Addressed issue with a scheduled task that doesn’t run in Task Scheduler after reenabling.
:>Addressed issue to update the Access Point Name (APN) database.
:>Addressed issue with Japanese characters that are missing when converted by the Input Method Editor.
:>Addressed issue with the system tray showing no Wi-Fi connection even when Wi-Fi is present.
:>Addressed issue with Windows devices that disconnect from the Internet prematurely before users can complete their paid Wi-Fi purchase.
:>Addressed issue to update the new Belarusian ruble symbol to Br and the new ISO 4217 code to BYN.
:>Addressed additional issues with multimedia, Windows kernel, packaging release management, authentication, Microsoft Edge, Internet Explorer 11, Remote Desktop,
:>Active Directory, wireless networking, Windows shell, graphics, enterprise security, and Microsoft HoloLens.
:>Security updates to Boot Manager, Windows operating system, kernel-mode drivers, Microsoft Edge, Internet Explorer 11, Microsoft Virtual... Read more

More replies
Answer Match 55.44%

My PC (win 10 pro, 64bit) started a cumulative update at about 9am this morning and it's still cranking.
Is it really necessary to do that during business hours despite my business hours setup is from 8am to 8pm?
I remember, before the anniversary update, the updates started in the evening when I shut down my PC, went through its paces at night and shut the PC down when it was finished. What happened to that?
Thanks,
Ed

A:Cumulative update during business hours?

Hi,
1. You can block Windows updates from downloading by various widely published means. The downloads otherwise occur at any time.
2. You can use Active Hours (build 1607) to prevent restarts during a 12 hr period max. You should be able to use 3rd party software to block restarts otherwise (I haven't managed to definitively test that with updates).
3. Pro upwards editions support deferring upgrades (in Settings).

more replies
Answer Match 55.44%

There is a cumulative Windows update that appears in each monthly set of updates and if I don't catch it in time it prevents three different Windows 10 systems in my house from booting and I have to use True Image to restore. This has been going on for about 5 months now and I know there are a lot of folks with the same problem. You'd think Microsoft would pull or fix the update. At least two of the systems are are W10 Professional or Ultimate so I've just used gpedit to stop automatic updates (you'd think I would have done this earlier), but the other system isn't and I have to remember to create the images and/or hide the update on the day it comes out. What a Pain!!!Just using the forum to rant

A:Cumulative Update a Real Pain

I really dont understand Microsoft these days:Pushy for people to 10 even when people go through measures to avoid it, and then now to hear that they are even pushing updates that are unwanted once your onto 10 which break systems. WOW.Patio suggested that he has set his updates to notify vs auto for his system(s). I am going to do this for all my systems now. It might be the fix to your problem here too. My situation is that systems on 7, Microsoft is trying to force to 10 and I dont want 10. I have one computer that I took the free Windows 10 upgrade on from 7. And that system is in my closet for someday when I need 10 for some reason I will have a system on 10 and not miss out of the free upgrade. But other systems I want to remain on 7. Some of which clearly do not support 10 due to age of a single-core laptop for example where the Intel Chipset was lucky enough to have Windows 7 driver for integrated video, but of which there is no Windows 10 driver for the GPU so it fails to upgrade to 10. Others I know have have their computers turn into a brick when taking free upgrade and then the system is stuck in a boot loop because there was a malfunction with a driver or something else causing a crash condition boot loop etc.I ended up cloning the drive in my one highly configured Windows 7 system so that if Microsoft somehow tries again to forcefully upgrade me to 10, i should be able to clone the cloned drive back to the master drive. I have the drive that is cloned inside the... Read more

14 more replies
Answer Match 55.44%

I'm hoping somebody might be able to advise me on an issue I'm having. I'm not the most techy so I'm hoping I can explain it accurately.

It seems to be (from what I have discovered) linked to the Windows 10 Cumulative Updates.

Issue 1 began on the 28/01/16 as soon as Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3124262) was installed

I noticed that there was now a delay of about 30-40 seconds between switching the laptop on and the Windows log in screen appearing. During this time is the annoying rotating circle.
Then once my username and password were entered, there was another longer delay (complete with rotating circle) before taking me to the desktop.

Issue 2 began a few days later when Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3135173) was installed. I no longer had access to the windows start menu (I had to right click) or the Action menu. Issue 1 also persisted.

I did some googling and discovered that these issues may be because of the updates themselves (not installing properly) and found the page for a manual download for (KB3135173)

I'm just wondering if I did the right thing. I uninstalled (manually) both the Cumulative and security Updates for (KB3124262) and (KB3135173) and manually reinstalled (KB3135173) .

I now have access to my Windows start bar and action centre again but the slow start up persists. I'm just hoping I did the right thing. Was it ok to uninstall both the Cumulative and Security upd... Read more

A:Windows 10 Cumulative update issues - can anyone help?

I should also add that when it finally does get to the desktop.....there is yet another delay and spinning small blue circle before apps are launched. (they finally all flicker) I don't even have that many of them. It really seems like the OS is delaying as it is doing something.....and all of this suddenly in the past two weeks.

0 more replies
Answer Match 55.44%

I'm hoping somebody might be able to advise me on an issue I'm having. I'm not the most techy so I'm hoping I can explain it accurately.

It seems to be (from what I have discovered) linked to the Windows 10 Cumulative Updates.

Issue 1 began on the 28/01/16 as soon as Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3124262) was installed

I noticed that there was now a delay of about 30-40 seconds between switching the laptop on and the Windows log in screen appearing. During this time is the annoying rotating circle.
Then once my username and password were entered, there was another longer delay (complete with rotating circle) before taking me to the desktop.

Issue 2 began a few days later when Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3135173) was installed. I no longer had access to the windows start menu (I had to right click) or the Action menu. Issue 1 also persisted.

I did some googling and discovered that these issues may be because of the updates themselves (not installing properly) and found the page for a manual download for (KB3135173)

I'm just wondering if I did the right thing. I uninstalled (manually) both the Cumulative and security Updates for (KB3124262) and (KB3135173) and manually reinstalled (KB3135173) .

I now have access to my Windows start bar and action centre again but the slow start up persists. I'm just hoping I did the right thing. Was it ok to uninstall both the Cumulative and Security upd... Read more

A:Windows 10 Cumulative update issues - can anyone help?

I should also add that when it finally does get to the desktop.....there is yet another delay and spinning small blue circle before apps are launched. (they finally all flicker) I don't even have that many of them. It really seems like the OS is delaying as it is doing something.....and all of this suddenly in the past two weeks.

more replies
Answer Match 55.44%

Download Cumulative Update for Media Center for Windows 7 (KB2284742) from Official Microsoft Download Center

I have sp1, and do not see this update in windows update in control panel.

A:Is KB2284742 cumulative WMC update inside sp1?

You most likely have it already since it is 4 years old.

2 more replies
Answer Match 55.02%

http://news.softpedia.com/news/new-...security-patches-to-launch-today-509160.shtml

Microsoft will kick off the Patch Tuesday rollout in a few hours, and Windows 10 systems are expected to get its own batch of fixes, including brand new cumulative updates for the original version released in July 2015 (10240), November Update (1511), and Anniversary Update (1607).

Just like usual, cumulative updates are particularly important for Windows 10 users because they bring computers completely up-to-date once they are installed, but it?s no secret either that plenty of them actually came with bugs and caused trouble on PCs.

Microsoft is yet to deliver a cumulative update that installs fine on all Windows 10 computers, but given the fact that new ones are expected today, we?ll keep an eye out on reports and will let you know should anything go wrong.

This month?s Patch Tuesday also brings an important change for Windows 7 and 8.1 systems, as Microsoft switches to a rollup servicing cycle that?s similar to the cumulative updates shipped to Windows 10 computers.

Challenging month for companies
Chris Goettl, product manager at Shavlik, expects this Patch Tuesday to be particularly challenging for many companies, as it could raise additional problems, some of which would involve application compatibility.

?While well intentioned, Microsoft¹s change will likely impact many companies, and in some cases, push them to make difficult decisions. At first glance, it appears appl... Read more

More replies
Answer Match 55.02%

New Windows 10 Cumulative Updates, Security Patches Coming This Week

This month?s Patch Tuesday will kick off tomorrow and in addition to the typical release cycle that includes security patches for Windows, Office and other software, there are also two highlights that everyone should have in mind.

First and foremost, Microsoft will release new cumulative updates for all Windows 10 versions released so far, including the original July 2015 version, November Update, and Anniversary Update.

These cumulative updates will be shipped through Windows Update and will bring computers fully up-to-date, supposing that they are actually capable of installing them ? in the last few months, cumulative updates have caused quite a lot of problems on Windows 10 computers and there were many cases when they simply failed to install for bugs that are still unknown.

The changelog of each cumulative update will be revealed tomorrow, but keep in mind that they require a system reboot, so IT admins should save work on Windows 10 computers before deployment.

Patch for Google-disclosed flaw
In addition to new cumulative updates, Microsoft will also deliver a patch for the security flaw that Google publicly disclosed last week and which is already being exploited in the wild.

Microsoft confirms that it recorded attacks from a group of Russian hackers known as Fancy Bear, but explained that Edge browser users were already secure thanks to patches that were shipped to Windows 10 systems. Ev... Read more

More replies
Answer Match 54.6%

Quote:




Microsoft is rolling out the first cumulative package of non-security-focused updates and fixes for Windows 10 one week after the company began making available to users the release-to-manufacturing (RTM) version of the operating system.

Referred to by some company watchers as "Service Release 1," the actual update package is officially known as KB3081424. (Thanks to The Verge's Tom Warren for a pointer to the KB.)

There's not a lot of information so far about what's in today's update, which Microsoft is delivering via Windows Update. The KB page says the following:"This update includes non-security-related changes to enhance the functionality of Windows 10 through new features and improvements.Windows 10 updates are cumulative. Therefore, this package contains all previously-released fixes (see KB 3074683). If you have installed previous updates, only the new fixes that are contained in this package will be downloaded and installed to your computer."





Microsoft delivers first cumulative Windows 10 update | ZDNet

A:Microsoft delivers first cumulative Windows 10 update

Microsoft Delivers Windows 10 SR1


Quote:




I know what you?re thinking. SR1? Seriously? But it?s true: just a week after the initial release of Windows 10, Microsoft has delivered the first major update to its latest OS. Dubbed Service Release 1 (SR1) internally, this cumulative update for Windows 10 provides no new features but does offer a ton of small fixes.

?This update includes non?security-related changes to enhance the functionality of Windows 10 through new features and improvements, the Knowledge Base article for this update blandly notes. ?Windows 10 updates are cumulative. Therefore, this package contains all previously-released fixes (see KB 3074683). If you have installed previous updates, only the new fixes that are contained in this package will be downloaded and installed to your computer.?




https://www.thurrott.com/windows/win...windows-10-sr1

10 more replies
Answer Match 54.6%

Just received a cumulative update for 14342.

A:New Cumulative Update for Insider Build 14342

Yep, got this update here too. Interesting.
I think we'll have a Feedback Hub post about this patch in a few hours.

5 more replies
Answer Match 54.6%

HiI have upgraded to Windows 10 and my Windows says that its activated. Now the problem is that there is a Cumulative Update KB3081424 that won't install. Its stuck at 0% (preparing to install update) and I have also tried the standalone update installer (manually installing the update) and it stays at initializing installation. I have searched around on the internet and many people have this issue but they seem to get stuck at 30% and mine doesn't even go past 0%.I have checked for the registry problem like most people mentioned and looked at the ProfileList and everything was in order.Please if you guys know anything I would appreciate that.Tek Ideas Unlimited

A:Windows 10 Cumulative Update KB3081424 not installing

Use this until they sort it out.How to temporarily prevent a Windows or driver update from reinstalling in Windows 10 https://support.microsoft.com/en-us...

2 more replies
Answer Match 54.6%

From Softpedia

Microsoft has released a new Windows 10 cumulative update for systems running the Anniversary Update (1607), but the company hasn?t provided any release notes, so it?s hard to tell what exactly it?s improving.

Windows 10 cumulative update KB3199209 is now available for download via Windows Update, and Microsoft isn?t saying a single thing about it, even though interest in such updates has been fairly big lately. There?s no KB page just yet, and the Windows 10 update history page hasn?t received an update, so there?s absolutely no info on it.

But even so, users are strongly recommended to download and install this new cumulative update, and until now, there are no reports of failed installs or any other issues experienced after deploying it. But as always, it could take a while until more users get to install it, so we?ll be keeping an eye out on reports to see if there?s something wrong with it.

Botched cumulative updates
The latest cumulative updates released by Microsoft have caused problems on quite a lot of computers, and in most of the cases, they failed to install with error messages that said almost nothing about what went wrong. Microsoft investigated all these complaints and released fixes, but even so, there are users who?re still unable to install cumulative updates.

In the case of KB3199209, Microsoft might be trying to fix issues that users have been reporting with previous cumulative updates, as the download size is quit... Read more

A:Microsoft Releases Cumulative Update KB3199209

They can't say what it's effecting, most likely I will skip it till they open up.
Cool share Bora
 

1 more replies
Answer Match 54.6%

Hi there

after applying the latest cumulative updates IE11 is now broken on my system (W10 pro X-64)..

Often the Main (home page) of a site works but as soon as you link to other links in the site garbled text often appears.

Here's an example from BBC website. Main news page opens but link to a story and :




One can partly fix by pressing F12 and setting IE compatibility to IE10 or IE9.

Cheers
jimbo

A:latest cumulative update breaks IE11

Mine seems ok, but Microsoft did say they were killing IE off:

How often do you delete the browser cache.

0 more replies
Answer Match 54.6%

Windows 10 Pro x64 laptop had updates set to automatically download and then notify. (Still using v. 1511 build 10586 due to continuing reported issues with 1607.) No problems with any updates prior to Oct 2016.

Oct 11 cumulative update KB3192441 apparently failed and gave notice it would "automatically retry later". Download failed again on Oct 12, 13 and 14. Went to Microsoft Update Catalog and downloaded/installed KB3192441 without any apparent issues. But when I opened Settings > Update & security, I saw a brand new notice that "Some settings are managed by your organization" (see screenshot.)

Q1: Why did this happen?

Q2: How do I regain full control over future updates since this laptop is not part of an "organization"?

NOTE: I tried modifying Windows Update settings using this tutorial. No effect on removing the "Some settings are managed by your organization" notice.

Windows Update Automatic Updates - Enable or Disable in Windows 10 - Windows 10 Forums

I also tried using three System Restore Points and two System Images all made prior to Oct 11. They did not have any success in removing the notice. It reappeared as soon as I clicked the "Check for updates" button.

(BTW, going thru the Microsoft Update Catalog resulted in a download of 1.03GB and took almost 6 hours to complete. I understand that MS wants people to have all released updates but this cumulative concept really stinks. End of rant.)

More replies
Answer Match 54.6%

I thought it was KB3149135, but as it turns out it is KB3163018.

Windows 10 Cumulative Update KB3163018 Also Failing to Install on Some PCs

On my system:

Smashed ELAN\pointer device driver.
System Restore would not function.
Could not uninstall KBs - even in Safe Mode.
Could not uninstall KBs - even with wushowhide utility.

Had to clean install Windows 10.

* * * * *

How you like them forced W10 updates now ???
 

A:KB3163018 Cumulative Update Smashing Systems

All went well for me on four machines. Touch wood.
 

2 more replies
Answer Match 54.6%

Windows 10 Pro x64 laptop had updates set to automatically download and then notify. (Still using v. 1511 build 10586 due to continuing reported issues with 1607.) No problems with any updates prior to Oct 2016.

Oct 11 cumulative update KB3192441 apparently failed and gave notice it would "automatically retry later". Download failed again on Oct 12, 13 and 14. Went to Microsoft Update Catalog and downloaded/installed KB3192441 without any apparent issues. But when I opened Settings > Update & security, I saw a brand new notice that "Some settings are managed by your organization" (see screenshot.)

Q1: Why did this happen?

Q2: How do I regain full control over future updates since this laptop is not part of an "organization"?

NOTE: I tried modifying Windows Update settings using this tutorial. No effect on removing the "Some settings are managed by your organization" notice.

Windows Update Automatic Updates - Enable or Disable in Windows 10 - Windows 10 Forums

I also tried using three System Restore Points and two System Images all made prior to Oct 11. They did not have any success in removing the notice. It reappeared as soon as I clicked the "Check for updates" button.

(BTW, going thru the Microsoft Update Catalog resulted in a download of 1.03GB and took almost 6 hours to complete. I understand that MS wants people to have all released updates but this cumulative concept really stinks. End of rant.)

A:October2016 Cumulative Update Changed Settings

Run CMD as admin and copy/paste:

reg delete "HKCU\Software\Microsoft\WindowsSelfHost" /f
reg delete "HKLM\Software\Microsoft\Windows\CurrentVersion\WindowsUpdate" /f
reg delete "HKLM\Software\Microsoft\WindowsSelfHost" /f

Note, that it will probably appear again, it is related to some Windows Update/Insider settings.

0 more replies
Answer Match 54.6%

Stuck at 95 percent, will it finish, been their for 6 and 1/2 hours... is their a way to download it manually? (pls is their a way to stop the download loop of 95 percent so I could download the update and manually do it, - well will try leaving machine one all night to see if it corrects itself, if not is their a way to get the download to stop and as I mentioned above do it manually.

My Dell will not fix this machine so I have start up in manual Dell (this is the 6th replacement of this machine and it will not keep any 3rd party software like my Office 360, Works, AVG Ultimate has to be reinstalled every 18 hours (professionally twice). Dell warranty of if not fixed over internet, will have a tech out the next day, well 3 months I got the over the internet, so I start up in "safe boot" dell, then switch to the Microsoft Logo for the remainder of the start up. I cannot watch a movie of 578 MB with a speed of 118.98 Mpbs with 8 GM of RAM (requirement for the quality of my AMD R5 the Vudu platform only required 11,000 KB to stream their highest quality, which this system has but I can only play one movie at SD and the have to manually clean out catches (automated companies 1970/80/90, merchant, have every version of Microsoft since first PC sold, so think I own 580 versions starting with XP. Terminally Ill US Veteran and with 55 heart attacks wish someone at Microsoft could help, they only seem to want to sell more "One Drive" spaces, yet all my files a... Read more

More replies
Answer Match 54.6%

Just wondering how/if it's possible to just get security and stability updates after these changes come next month?
I am a home user, so I don't have access to WSUS or whatever.

More replies
Answer Match 54.6%

Less than a week after Microsoft released the first cumulative update to Windows 10, they have pushed out another cumulative release via Windows Update. At this time, it is not known what this release includes - but many users will be hoping that it contains a fix for issues that were causing some machines to enter a reboot loop while trying to install the first update.

This particular update is KB3081436 and you can find the support page here and the update log is posted below.Click to expand...

Read more: http://www.neowin.net/news/microsoft-rolls-out-second-cumulative-update-for-windows-10
 

A:Microsoft rolls out second cumulative update for Windows 10

aye, just got this one, been out all day ... no idea what it fixes, or breaks, yet ... may try and reinstall Skype to see if it's fixed. Then again I may not.
 

6 more replies
Answer Match 54.6%

Am unable install this large update. Have tried several posted fixes I.e registry fix to delete orphaned account(there wasn't one), install update standalone(didn't work), applying windows update fix(didn't work)
and also amending windows update service(didn't work).
It appears that quite a few people are having this problem and some of these remedies work and others don't. Anyone with the same problem and ideas how to fix?
 

A:Windows 10 cumulative update kb3081424 not installing

Should be a Non-problem now
 

4 more replies
Answer Match 54.6%

KB3176938 was downloaded and installed automatically today (restart required). It applies to Windows 10 Version 1607. This update includes improvements and fixes to enhance the functionality of Windows 10 Version 1607. Fixes and improvements:August 31, 2016 — KB3176938 (OS Build 14393.105)This update includes quality improvements. No new operating system features are being introduced in this update. Key changes include:    Improved reliability of Windows Ink Workspace, Microsoft Edge, File Server, Windows kernel, Microsoft Component Object Model (COM), Cluster Health Service, Hyper-V, multi-factor authentication (MFA), NTFS file system, PowerShell, Internet Explorer 11, facial recognition, graphics, Windows Store, and Windows Shell.    Improved performance related to purchasing Windows Store apps.    Improved battery life of wearable devices (such as the Microsoft Band) while Bluetooth is connected and idle.    Improved compatibility of using Xbox One controllers with various games.    Addressed issue with incorrect character mapping between Japanese and Unicode for the question mark.    Addressed issue that prevents the download and initialization of .NET objects in Internet Explorer 11.    Improved support of new near-field communication (NFC) chips for Windows 10 Mobile.    Addressed issue with game or app audio not resuming after ending a call on W... Read more

More replies
Answer Match 54.6%

Hello,
I'm trying to install the latest Windows Update - Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3189866) - however it's stuck at 45%. Restart won't help. Did you had this issue?



Helpful article: Here's how to install balky Windows 10 cumulative patch KB 3189866

Here's how to install balky Windows 10 cumulative patch KB 318986

I'm seeing posts all over the web from folks trying to install the latest Windows 10 Anniversary Update (version 1607) cumulative update. KB 3189866 is supposed to bring Windows 10 AU to build 14393.187, but reports say the installer gets stuck at 45 percent, 48 percent, 95 percent, and various other points along the way.

The problem's widespread, and Microsoft has known about it since shortly after the patch dropped. Since it's a cumulative update, there's no easy solution.

Microsoft will certainly figure out what's blocking the patch, but in order to fix it the company will have to release a new cumulative update. Unless it can find a magic way to modify a released cumulative update, the only solution is a new cumulative update that absolves the sins of the original. That's one of the big problems with these massive, one-way "as a service" patches. It's also a totally predictable problem, as I've been saying for almost two years.

If you're faced with this issue, be of good cheer: There's an easy solution. Some suggest th... Read more

A:Cumulative Update KB3189866 for Windows 10 stuck at 45%

I had this issue but got it to install by manually downloading it myself!
 

7 more replies
Answer Match 54.6%

You can read about it here and view its exhaustive list of updates.

http://betanews.com/2015/08/05/microsoft-update-for-windows-10/

https://support.microsoft.com/en-us/kb/3081424

-----------------------------------------------------------
 

A:Large Cumulative Update Released For Windows 10

11 more replies