Tech Problem Aggregator

Cant find "System Image" of 36 GB but its shows on "Manage Disc Space"

Q: Cant find "System Image" of 36 GB but its shows on "Manage Disc Space"

Dear Experts,

I have created windows image on Drive F: but delete it after some time manually due to some space prob.
But while backup shows about 40 GB only few GB space got free after deletion. When i try to again take the the backup using windows 7 backup & restore option, its still shows 35 Gb of System Image in drive F: when i brows the Manage Disc Space option but i cant find it on the same drive. (Plz see attached pic)
Plz help me to locate this and delete the same.

Thanks

A: Cant find "System Image" of 36 GB but its shows on "Manage Disc Space"

Hello sattyaji, and welcome to Seven Forums.

It may still be showing if the system image was created as part of a Windows backup. Using the tutorial below to reset Windows Backup should clear it for you, but you will need to set up your backup again afterwards.

Backup User and System Files - Reset to Default Configuration

Hope this helps,
Shawn

5 more replies
Answer Match 119.7%

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.... Read more

A:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

3. If neither of those work, its likely that because of the fact that when windows is repairing itself, it is generally putting copies of its system files in the same physical location on your disk. Because your disk is obviously not completely dead, ie....its still loading to the windows 7 startup screen, its just copying files to the bad sectors on your hard drive and gets stuck when loading. This is especially my guess because you said Safe mode is having same problems, even after attempting to repair. In the past, I've tried and salvage a disk by reformatting it and only leaving on partitions which do not contain the bad clusters. This takes some time, and some guess work.....and really this is only a "bandaid" fix because once the disk has bad clusters, its only a matter of time before these things give out. You wouldn't want to trust your important data on it anyways....

I hope this leads you in ... Read more

1 more replies
Answer Match 116.1%

Which one should I do? I originally wanted to just do "Return computer to factory condition" but Theog just suggested "Use A System Image Created Earlier." I have no idea what to do. So confusing!

A:"Return computer to factory condition" or "Use A System Image Crea..."

Hello M4TE and welcome to Seven Forums. Sorry for the delay in responding but I just came across your question.

Most newer manufactured computers have a hidden recovery partition on the hard drive. The manufacturer provides specific instructions on how to access that partition in case you want to restore your machine to the exact condition it was in when it left the factory. That means you'd have to go through the time consuming process of cleaning out factory bloatware (like free trials of programs you'll never need), installing programs you do need, updating everything, creating your personal settings, etc. Here is a general idea of how to access the hidden recovery partition.

HP Recovery From Partition

Let's say it took you a day or two to set up your machine to your liking using the hidden recovery partition. A System Image is like a snapshot of your entire hard drive. It will include everything from the operating system to all your programs, files, photos, music, all updates ... everything. Most folks keep it on a separate external hard drive. Let's say a week later you get a virus or your machine crashes for some reason. You can use that System Image to return your machine to the exact condition it was in when you made the image. Usually takes about 30 minutes or so and you're back in business. It's a lot faster and more convenient to only worry about a week of updates compared to probably months with the hidden recovery partition. The newer a System Image is the... Read more

1 more replies
Answer Match 116.1%

Made a HUGE mistake, messed with the settings under "My Computer" > "Manage" > "Services> and also the "Local Users". Now having trouble, can not see my "Start and Task Bar", the "windows"+ ''e" is no longer working.

How can I restore the Services & the Local Users account without having to reinstall my whole computer? I am afraid I will loose lots of files... I do not remember what exactly I changed, but some of the "Services" I changed to "disable" now when I try to open properties and change them back, I am unable. The right click to get to properties is not working.

Your help is highly appreciated.

A:How to restore the defaults for "services" under "My Computer" > "Manage>

I am not sure about the "quick" way of restoring, but what you can do is go back to services, "RIGHT-CLICK" the white area select "HELP" then the third option is "Default settings for services"

you can see what the default was and manually restore it. I have tried to copy and paste it below

==========================================================

Service Startup Type Log On As Additional information
Alerter Manual Local Service
Application Layer Gateway Manual Local Service
Application Management Manual Local System
Automatic Updates Automatic Local System
ClipBook Manual Local System
COM+ Event System Manual Local System
COM+ System Application Manual Local System
Computer Browser Automatic Local System
Cryptographic Services Automatic Local System
DHCP Client Automatic Local System
Distributed Link Tracking Client Automatic Local System
Error Reporting Automatic Local System
Event Log Automatic Local System
Help and Support Automatic Local System
IMAPI CD-Burning COM Manual Local System
Internet Connection Sharing Manual Local System
IPSec Services Automatic Local System
Logical Disk Manager Automatic Local System
Logical Disk Manager Administrative Service Manual Local System
MS Software Shadow Copy Provider Manual Local System
Net Logon Automatic Local System
NetMeeting Remote Desktop Sharing Manual Local System
Network Connections Manual Local System
... Read more

3 more replies
Answer Match 114%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Answer Match 114%

Hi Guys, any ideas how to access my external hard drive [TOSHIBA MK3029GACE] device manager can see it but it does not appear in disc management.

I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management.

Please check the attached screen shot..

Thanks for the help....

A:HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management

Specs show that drive has a ATA-6 interface (P-ATA, or IDE). How are you connecting this drive to your laptop? Does the laptop have a PATA or SATA connection? Does it use an adapter?

1 more replies
Answer Match 112.8%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Answer Match 112.2%

After our Dell Inspiron E1505 recently crashed , Dell talked us thru diagnostics and finally sent us a replacement(refurbished) Toshiba hard drive to install in our computer. After installing it, and reloading all of the software for Windows XP, MS Office Small Business 2003, drivers and utilities, using the discs that came with the computer, we have a "Found New Hardware" window that pops up - Wizard trying to install a "Base System Device" everytime we turn the computer on. It asks for a disc but none of my existing ones seem to be the correct one. I've given it permission to connect to the Internet to "find" the software but nothing works.
Also, since the crash/re-install, our C drive only has 12.4 GBs of total disc space, and of that, only 1.2 is still free space. My D drive has about 37 GBs of disc space. Could these two problems be connected? The computer was running so slow and we would periodically get a message "low virtual memory". This weekend, I moved as many of our documents as possible to the D drive to try and free up space. It's a little better, but why do I have such a small amount of disc space? Help!
 

A:recurring message to install "base system device"-unsuccessful & low disc space

7 more replies
Answer Match 111%

Hi there,

I am facing a problem with the backup program of Windows 8. My computer (Asus with 250SSD) disk is new and I just installed my programs. Now I want to create a System Image using Windows. The image should be around 50go. Everything works fine until I get a message error saying my external disk does not have enough space, which is impossible since it is completely empty (500go).
Did anyone have ever meet that problem and/or have advices to help me? I would like to solve that and not be forced to used another way to backup.

Thank you,

Vari

A:Create system image failed - "not enough space on disk"

Is your second disc formatted NTFS?

7 more replies
Answer Match 109.2%

Where will I find the KB (or similar) document "Creating a System Image" for Windows 7 Professional?
Thanks!
Tom G.

More replies
Answer Match 108.9%

Win 7 backup facility works fine but after the backups have been made I use the "Manage space" tool via Win 7's "Backup and Restore" facility even though I'm using the very same Win 7 user and password I used to setup and run the backups. My user and password has "Administration" authority.

Now the backups are located on a Western Digital NAS. I can view all of the Win 7 backups there via this laptop via Windows Explorer. These backups are located on a "Public" folder on the WD NAS device on my LAN.

I've searched the web for clue/solutions. I even created another Win 7 user and password with "Administration" authority and used it to create backups in a different folder on this NAS device's "Public" folder. Same thing, no access via "Manage space" because "The backup location is not accessible." but I can view the backup files.

More replies
Answer Match 108.3%

i want make a dvd disk for my compaq recovery, but it always shows "this is not a blank disk, please insert a blank dvd?". wut should i do to get a recovery dvd? (i have updated my drive, but nothing useful. i have tested my burner with nero, it works fine.)
 

A:"compaq Recovery Cd/dvd Creator"!!! why it always shows "this is not a blank disk"?

plz help!!!
 

1 more replies
Answer Match 108%

Hi Everyone,

i am using CRichEditCtrl::GetLine() function to read the text from a dialog.
If my text contains any space character then it is throwing improper argument error and the application getting closed in vista only.....
What is the actual problem ????? why it is happening with vista only...?

Please suggest

More replies
Answer Match 107.7%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Answer Match 107.4%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Answer Match 106.8%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Answer Match 106.8%

Please can somebody help with this minor but annoying matter. When turning on my business computer one morning, the space bar and return/enter buttons are visable when i type emails, but when i send them, they are not. I know its a setting, but can anyone tell me what setting and how to turn it off?

Thanks!

A:[SOLVED] "Space bar" and "return/enter" are visual on emails! Help

You need to tell us what email client you use as these days not everyone uses the built-in one.

4 more replies
Answer Match 106.8%

"Windows cannot find C:\windpws\system32\rstui.exe"; also "wfn.exe"
Any help provided would be most appreciated.
Thank you!

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz, Intel64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 4026 Mb
Graphics Card: NVIDIA GeForce 310M , 512 Mb
Hard Drives: C: Total - 598095 MB, Free - 540781 MB;
Motherboard: TOSHIBA, NWQAA, 1.00, 123456789AB
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

A:Windows7 cannot find "System Restore' and "Wondows Fax and Scan"

9 more replies
Answer Match 106.5%

Please help us to troubleshoot the following problem in our Compaq NX 9000 Machine with Windows XP Professional Operating System:-

- An error shows with two options "Switch to" & "Retry" after booting the machine, which forces to press "Retry" button in the error window repeatedly and as you press this "Retry" button, "Start Menu" automatically opens and it then again asks to press "Retry" Button.
________________________________

Thanks to all helping members.

Regards,
 

More replies
Answer Match 106.5%

My notebook is set to the recommended screen resolution, under display settings that allows you to change the text size indepdenent of the screen resolution, I was expecting to see 3 radio buttons (as per the windows 7 tutorial) but I can see only "Small" and "medium". I haven't played around with different screen resolutions to see if it has any effect.

I wonder if it needs some driver update or related to my screen resolution or whatever? Thanks.

A:display settings only shows "Small" & "Medium"

I really don't know, but the Nvidia driver automatically makes some adjustments, depending on what it is installed on. I suspect that they feel no one would want the large text on a small display.

2 more replies
Answer Match 106.2%

This is a resurection of an old unresolved Vista Post, and it also happens in Windows 7.
====================================
Original subject - Start Menu - program search issue
I use Windows Mail for my daily email tasks, and would like to be able to
open the program by using the vista search bar built into the start menu. The
problem is, when i search for "mai" it brings up Windows Mail, and I can hit
enter and load the program. However, when I search for "mail", it returns:
"No items match your search." I have it set to index both the start menu and
my programs directory, and have even tried to rebuild the index.

It seems kind of strange that Vista would recognize that when I type "mai" I
want my mail programs, but when I actually type "mail", it gets confused...
and this in turn has -me- confused.
====================================
and
====================================
Oh thank goodness, I've finally found someone else with the same problem.
The word I have issues with is "photo" ("phot" works great, but no results
for "photo"). Not a show-stopper, but WHY!?
====================================

I've noticed the same thing with Windows Desktop Search in Windows 7. After some experimenting I think I have the reason why, but not a fix.

It seems to em that mail and photo are probably used as "kind =" prefixes in Windows search, and even if you enter photo with out ... Read more

More replies
Answer Match 106.2%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Answer Match 106.2%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Answer Match 105%

Browser (IE7) will frequently redirect to a page with a message "Sorry we couldn't find "http://www.atdmt.com..." or "http://ad.doubleclick.com" or other various tags (though these are most common).

Web pages will often not load at all or will redirect while reading a webpage without any user action.

Occasionally it will simply say unable to load "actual web page trying to visit". Also oddly - problem seems to occur much more frequently in the morning than evening. This makes me wonder if it is a internet provider issue.

Problem has been occuring over the last 2-3 weeks.

I have followed the 5 Step process to the letter and run DSS after the first four steps. The contents of file main.txt are listed below and extra.txt is attached as a separate file.

Very much appreciated in advance for your help when you get a chance to review this.

Main.txt
---
Deckard's System Scanner v20071014.68
Run by SJL on 2008-01-30 17:09:02
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------



-- Last 5 Restore Point(s) --
83: 2008-01-30 22:03:16 UTC - RP661 - Deckard's System Scanner Restore Point
82: 2008-01-30 20:21:50 UTC - RP660 - System Checkpoint
81: 2008-01-29 18:59:32 UTC - RP659 - System Checkpoint
80: 2008-01-28 18:34:48 UTC - RP658 - Installed Microsoft Office Live Meeting 2007
79... Read more

More replies
Answer Match 105%

I'm not sure what this is in Windows Update [and this seems to be greyed out itself too], but how is it possible to have no results in Google on this KB that's in Windows Update?

I also clicked on the "more information" for the Microsoft Knowledge Base, but nothing came up there either.

A:A "non-existent" Windows update ("KB3024777") even Google can't find

Also note that it can't be unchecked/deselected.

Edit: It seems this update removes kb3004394 and vanish without a trace (except in History).
Neither seems to be available in the uninstall list afterwards.

9 more replies
Answer Match 105%

Hello

I have these 2 unwanted icons on my desktop, "Click to find & Fix errors" and " Sportsbook Football". I don't what type of programs they are but they downloaded themselves without my authorisation and I can't get rid of it.

I have run Ad-Aware, Spybot, The Cleaner (trial version), AVG anti spyware, Webroot (trial version),Windows Defender.

I think it was Webroot Spy Sweeper or The Cleaner that removed "Click to find & Fix errors" but it kept coming back.



Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 3:28:08 PM, on 5/22/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16640)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\Grisoft\AVG7\avgcc.exe
C:\Program Files\Java\jre1.6.0_06\bin\jusched.exe
C:\Program Files\Apoint\Apoint.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Apoint\HidFind.exe
C:\Program Files\Apoint\Apntex.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Grisoft\AVG Anti-Spyware ... Read more

A:Help remove "Click to find & fix errors" and "Sportsbook Football"

Hello
Can anyone help please?

Thanks

19 more replies
Answer Match 105%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Answer Match 104.7%

I have a Dell 2330 all-in-one running Win7 64 bit.

I'm trying to do a system image back up to a USB3 external hard drive. The image will take up about 333gb and I have about twice that amount of space left on the 1 TB drive.

I get the error message: System cannot find the file specified (0x80070002)

I've looked through this forum and found a suggestion that I use the SFC command to repair possibly corrupted files. Two questions:

1. Is this the best way to proceed or should I try something else?

2. Will the SFC alter changes I've made in the registry to slightly modify my keyboard.

Many thanks.

A:System Image: "System cannot find the file specified (0x80070002)"

  
Quote: Originally Posted by Mark Bacon


I have a Dell 2330 all-in-one running Win7 64 bit.

I'm trying to do a system image back up to a USB3 external hard drive. The image will take up about 333gb and I have about twice that amount of space left on the 1 TB drive.

I get the error message: System cannot find the file specified (0x80070002)

I've looked through this forum and found a suggestion that I use the SFC command to repair possibly corrupted files. Two questions:

1. Is this the best way to proceed or should I try something else?

2. Will the SFC alter changes I've made in the registry to slightly modify my keyboard.

Many thanks.


Hi Mark Bacon,

You can check the below link for resolving this issue if you do not wish to run SFC to fix this issue:

Error message when you try to restore from a full backup of a Windows Vista-based computer: "The system cannot find the file specified. (0x80070002)"

Also, when you run SFC, files critical to restart Windows that do not match the expected Windows version may be replaced with the correct versions. If a file is repaired, the corresponding registry data is also repaired. Protected files not critical to restart Windows are not repaired.

So, it would be advisable to make a backup of the registry before you run SFC. Please try the steps and let us know if it helps.

1 more replies
Answer Match 104.7%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Answer Match 103.8%

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\sy... Read more

A:"Your System Is Infected" Background + "Internet Security 2010" virus/malware problem

Hi and welcome to TSF.

I'm afraid HijackThis no longer provides the information we require.

We want all our members to perform the steps outlined in the link given below, as far as they possibly can, before posting for assistance.

http://www.techsupportforum.com/f50/...lp-305963.html

If you have problems with any of the steps, simply move on to the next one and make a note of the problem in your reply.

Please note that the Security Forum is always busy, so I would ask for your patience while waiting for a reply - it may take a few days.

This thread will now be closed.

1 more replies
Answer Match 103.8%

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\i... Read more

More replies
Answer Match 103.8%

(Dell XPS 8500, 24GB, 1GB mSata system drive, two Toshiba USB3.0 attached hard drives)
I have a storage space set up on my Windows 1607 primary computer. (Storage Spaces is a feature of Windows 8.1 and later and Server 2012 and later.) It is set up with a normal pair of large capacity hard drives and is in two-way mirrored configuration, formatted ReFS. I see the "reduced resiliency warning" but both drives are marked as "OK." What is the meaning of the "reduced resiliency" warning and what is required to remove it"? I get the same warning with a similar storage space configuration on my test box, the only difference being that it is formatted NTFS.

(posted also in Microsoft Communities)

More replies
Answer Match 103.8%

Hi All,

Thanks in advance for any help.

I purchased and installed an Iomega 34766 NAS yesterday. I have three machines that run Windows 7 (2 - Ulitmate 32bit & 64bit; 1 - Professional 32bit) and a Windows xp machine.

I am having trouble getting the Windows 7 Professional 32bit machine to show the NAS as a computer under the network folder. It will show the NAS as a Media Device and Other device. I can access the device as a media device, but when I click other device, it opens a IE browser and errors out. I have not been able to map the device in windows explorer either. This NAS has a print server built in and it will not show the printer either.

My other two Windows 7 Ultimate 32 & 64 bit (Desktop-Windows & HTPC) machines work just fine and the NAS shows under the computer and media device and does not show as other device. The printer pluged in the NAS works like a charm.

The primary computer that I need to work is the windows 7 professional version (LPC-PC) thats not working.

I posted a screen shot of what I am looking at from the computer that does not work and one of the machines that is working.

As a side note, LPC-PC is my laptop and it is the machine that is not working. Desktop-Windows and HTPC are the two machines that it is working just fine on.

I am able to connect to LPC-PC from Desktop-Windows; however I can not connect to Desktop-Windows from LPC-PC.

When I first started messing with LPC-PC it was not even showi... Read more

A:NAS shows as "Media Server" and "Other Device"

Well I solved my own problem and feel a little silly. I just happened to check my msconfig.exe and I had it set to selective startup with the first option for services unchecked.

Everything is now up and running. My NAS is showing and I can connect to all my computers.

1 more replies
Answer Match 103.5%

Good Morning,

I would like to introduce myself. I am new to the forum. Should I address an issue inappropriately, kindly alert me.

Most recently, I have experienced multiple PC issues. Recently, I performed a System Recovery and encountered the following ?

1. Cannot perform a SYSTEM RESTORE. The message is: ?Restoration Incomplete. Your computer cannot be restored."

2. When I booted up this morning, and DID NOT HAVE A DESKTOP.
The screen was blank ? no Icons.

3. The items below are APPEARING IN MY TEMP FOLDER, and are located at: C:\DOCUME~1\COMPAQ~1\LOCALS~1\Temp:

........a. 415303181927525125.tmp
......... plus similar numbers.

........b. IswTmp
........c. msohtmlclip1
........d. msohtmlclip

I delete the above items through safe mode but they re-appear.
** I am MOST CONCERNED ABOUT Items 1 & 2.

SYSTEM SPECIFICATION:

? (DESKTOP PC) Windows XP
? (SP3) HP Compaq Presario 061 - Media Center Edition,
? AMD Athlon (m) 64 Processor / (X 86-Based PC - 32-bit package)
? MOTHERBOARD Chipset - ATI RADEON XPRESS 200 CHIPSET
? Version 5.1 / 2600 Build Processor

** If someone would give me some feedback, I would appreciate it tremendously.
** THANKS IN ADVANCE.

Kind regards,
AJ

A:NO DESKTOP after booting up … & SYSTEM RESTORE "Incomplete" … & "Strange" Temp Files

Usually when the machine has a "blank" desktop, the boot/startup process has been interupted or is frozen to before Explorer is launched.

You can launch Explorer manually be navigating C:\Windows and double-clicking "Explorer".

If successful, do the following:

Start>Run>(type) "msconfig" and turn off all non-MS services and all startups.

Then, Start>Run>(type) "cmd", and at the command prompt type "chkdsk /f" and schedule a chkdsk to run on next reboot.

Reboot system and report results.

3 more replies
Answer Match 103.5%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Answer Match 103.5%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Answer Match 103.5%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Answer Match 103.5%

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

A:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

9 more replies
Answer Match 103.5%

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

More replies
Answer Match 103.5%

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

6 more replies
Answer Match 103.5%

Hey all,

I have a 3TB Seagate Barracuda drive which I use as a data (storage) drive. It's formatted NTFS, and I use the GPT partition scheme so that I can access the single large partition.

I had the drive attached via SATA to USB connector to a computer that went down suddenly a few days ago. When I tried to plug in the drive into a Windows computer, a very weird thing happened. The drive was there, but it wasn't quite recognized. Windows Explorer wouldn't load My Computer, and would just show a magnifying glass over the My Computer icon in the left sidebar.

However, when I entered Disk Management, the drive was shown normally, and had a drive letter assigned to it as well. Nothing abnormal there. While in DM, I was even able to right-click the drive and select "Open" and "Explore" which would open the drive's contents in a new Explorer window. So far, so good.

Here's where it gets really weird.

I opened the drive up in both AOMEI Partition Assistant Home Edition and MiniTool Partition Wizard Home Edition, and wouldn't you know it, the drive is shown with two partitions: one with 700 odd GB, and the rest of the drive as used space. The funny thing is, the space is shown with a negative sign (-) next to it! So for some reason, both programs saw the drive as having an incorrect amount of space, and showed a nonexistent program to boot!

I launched chkdsk on the drive, but after running for several hours, the drive was stuck after step 2, a... Read more

A:3TB Seagate drive shows "negative" space?

Most likely the file table (GPT) got corrupted due to the PC crashing. That means the data is all on the drive but the table that keeps track of it all got screwed up.








  
Quote: Originally Posted by Diogones


Should I try to recover what I can with a data recovery program, and reformat the drive to repair the NTFS file system and partition scheme.


Yes.
The first thing anyone should do before trying to fix things is backup the data.
Then wipe the drive (zero-out using PW or Diskpart) and afterward, using Disk Management, install it and initialize it as GPT, then create a new volume.







  
Quote: Originally Posted by Diogones


And will it recognize the drive as a 3TB, and not just a 700GB drive?


If you do as above, yes








  
Quote: Originally Posted by Diogones


Are my files recoverable now, since I haven't reformatted anything yet?


They should be. Try Recuva. It's free and and easy to use, and should do the job.

You could also (after recovering data!) try using Partition Wizard to "Rebuild the GPT". But that may not work now since you have already made other changes.

2 more replies
Answer Match 103.5%

I downloaded a Weather program, and my Antivirus program found a Trojan in the program.
It got rid of the virus, but now every time I boot or reboot I get a message "C:\WINDOWS cannot find "weathersetup.exe" ". I have tried everything I could think of, but cannot get rid of the system trying to load this.
Any help would be appreciated.
 

A:Solved: "Startup" problem (cannot find "Weathersetup.exe").

16 more replies
Answer Match 103.2%

Recently my computer is giving error messages for .exe tasks. I counted over twenty upon start ups and after. The exact messages read: "Google Update.exe (or other task names) - Bad Image", "The application or DLL "C:\PROGRA~1\Google\GOOGLE~4\GOEC62~1.DLL is not a valid Windows image. Please check this against your installation diskette."

My Operating System is Windows XP. I did a HijackThis scan as follows, and thank you for your help.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:17:32 PM, on 9/28/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS2\System32\smss.exe
C:\WINDOWS2\system32\winlogon.exe
C:\WINDOWS2\system32\services.exe
C:\WINDOWS2\system32\lsass.exe
C:\WINDOWS2\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS2\System32\svchost.exe
C:\WINDOWS2\system32\svchost.exe
C:\WINDOWS2\system32\LEXBCES.EXE
C:\WINDOWS2\system32\spoolsv.exe
C:\WINDOWS2\system32\LEXPPS.EXE
C:\Program Files\Common Files\ArcSoft\Connection Service\Bin\ACService.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Norton AntiVirus\Engine\17.0.0.136\ccSvcHst.exe
C:\Program Files\Google\Update\GoogleUpdate.exe
C:\WINDOWS2\system32\PSIService.exe
C:\Program Files\Spyware Doctor\pctsAuxs.exe
C:\Progra... Read more

A:"Google Update.exe - Bad Image" & "not a valid Windows image"

Bump.

I see on the HijackThis log, line 020 is the line that I'm getting on the error messages regarding bad image. So now, my husband uninstalled the Google download he did before and also uninstalled the folders with Google in them. The result is that the "Bad Image" pop-up messages have ceased, but I don't know if that's all we need to do.

I did another HijackThis log, which follows:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 5:10:56 PM, on 10/3/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS2\System32\smss.exe
C:\WINDOWS2\system32\csrss.exe
C:\WINDOWS2\system32\winlogon.exe
C:\WINDOWS2\system32\services.exe
C:\WINDOWS2\system32\lsass.exe
C:\WINDOWS2\system32\svchost.exe
C:\WINDOWS2\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS2\System32\svchost.exe
C:\WINDOWS2\system32\svchost.exe
C:\WINDOWS2\System32\svchost.exe
C:\WINDOWS2\System32\svchost.exe
C:\WINDOWS2\system32\LEXBCES.EXE
C:\WINDOWS2\system32\spoolsv.exe
C:\WINDOWS2\system32\LEXPPS.EXE
C:\WINDOWS2\System32\svchost.exe
C:\Program Files\RegCure\RegCure.exe
C:\WINDOWS2\Explorer.EXE
C:\Program Files\Common Files\ArcSoft\Connection Service\Bin\ACService.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Spyware Doctor\pctsTray.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Common... Read more

2 more replies
Answer Match 102.9%

Using "System Performance" DCS reports some events are lost. To fix it, I need to increase buffer size but I can't do it because all parameters are disabled. 
When I create custom DCS with same trace (based on "Windows Kernel Trace" provider) I increase num of buffers and everything works fine.
How can I change it for "System Performance"?

More replies
Answer Match 102.9%

hi every body
My PC has lots of files called "Thumbs.db" & "System volume information" in all its drives.I cant delete these files and I think the cause of shutting my pc down automatically and showing blue screen is these files.the operating system is win xp/sp2.
I don't know what to do with these and what anti virus will delete them.please help me.
thanks
 

More replies
Answer Match 102.9%

First off, thank you for any assistance in advance.

Problem: "System Alert" balloon in tray icon that will not go away and redirects me in IE 7 to hxxp://www.virprotect.com/?aff=1012.

Using SpyBot Search & Destroy and Ad-Aware SE, I seem to have gotten rid of the problem of the redirection of my home page as well as removed the trojan that caused all of this in the first place (I think). The pesky balloon, however, remains. All pre-steps your forum recommeded have been completed. Below are the logs your forum requests in advance (please note that my DSS "extra" log file is attached):

PANDA ACTIVESCAN
===============

Incident Status Location

Potentially unwanted tool:application/myglobalsearch Not disinfected c:\program files\MyGlobalSearch
Spyware:Cookie/Atlas DMT Not disinfected... Read more

A:[SOLVED] Trying To Remove "System Alert" Balloon That Directs To "virprotect.com"

Download SDFix from here and save it to your desktop.


Please then reboot your computer in Safe Mode by doing the following :
Restart your computer

After hearing your computer beep once during startup, but before the Windows icon appears, tap the F8 key continually;
Instead of Windows loading as normal, a menu with options should appear;
Select the first option, to run Windows in Safe Mode, then press "Enter".
Choose your usual account.

In Safe Mode, right click the SDFix.zip folder and choose Extract All,
Open the extracted folder and double click RunThis.bat to start the script.
Type Y to begin the script.

It will remove the Trojan Services then make some repairs to the registry and prompt you to press any key to Reboot.
Press any Key and it will restart the PC.

Your system will take longer that normal to restart as the fixtool will be running and removing files.
When the desktop loads the Fixtool will complete the removal and display Finished, then press any key to end the script and load your desktop icons.

Once the desktop icons load the SDFix report will open on screen and also save into the SDFix folder as Report.txt
(Report.txt will also be copied to Clipboard ready for posting back on the forum).

Finally paste the contents of the Report.txt back on the forum.


=========================================

This will help to identify malware on your system.
Please download Combofix from any of these locations:
... Read more

9 more replies
Answer Match 102.9%

I have been getting these "Bad Pool Header" and "System Service Exception" BSODs for about a day now (the "Bad Pool Header" one tends to pop up more often then the other btw). I ran a registry cleaner which didn't work and ran memtest this morning and it showed that my memory was fine. The BSODs tend to occur more often when I am playing a game or running some program that uses a bit more memory but it also happens when I am just on the internet. On the other hand, last night I did nothing but surf YouTube for 3 hours and didn't get a BSOD at all. However, since then I haven't been able to do anything for more than 10 minutes (without being in safe mode) without it crashing, and this morning it completely froze until I turned it off. My OS is Windows 7 Home Premium 64bit. It came preinstalled from the manufacturer and unfortunately I do not have the install disc. The entire laptop is less than 2 years old and there have been no major hardware changes and I have never reinstalled the OS.

A:Random "Bad Pool Header" and "System Service Exception" BSODs

UPDATE: Another BSOD just happened after I left the computer idle for a couple of hours except this one said something about Asdsm.sys.

1 more replies
Answer Match 102.9%

I have been getting these "Bad Pool Header" and "System Service Exception" BSODs for about a day now (the "Bad Pool Header" one tends to pop up more often then the other btw). I ran a registry cleaner which didn't work and ran memtest this morning and it showed that my memory was fine. The BSODs tend to occur more often when I am playing a game or running some program that uses a bit more memory but it also happens when I am just on the internet. On the other hand, last night I did nothing but surf YouTube for 3 hours and didn't get a BSOD at all. However, since then I haven't been able to do anything for more than 10 minutes (without being in safe mode) without it crashing, and this morning it completely froze until I turned it off. My OS is Windows 7 Home Premium 64bit. It came preinstalled from the manufacturer and unfortunately I do not have the install disc. The entire laptop is less than 2 years old and there have been no major hardware changes and I have never reinstalled the OS.

A:Random "Bad Pool Header" and "System Service Exception" BSODs

UPDATE: Another BSOD just happened after I left the computer idle for a couple of hours except this one said something about Asdsm.sys.

4 more replies
Answer Match 102.9%

Hello, I have a Lenovo R61i laptop that uses XP pro as its platform. I recently had to start from scratch, but now, when I tried to download photos from my Canon Exilim EX-V8 onto my hard drive, I see no "removable disc" icon under "My computer." Can anyone please help me download the photos?
 

A:No "removable disc" icon under "My computer"

9 more replies
Answer Match 102.9%

C:\Users|Owner|AppData|Conduit|BackgroundContainer|BackGroundContainer.dll
The specified module could not be found.
The error in the Task Scheduler does not allow me to delete any tasks because it is corrupt?

More replies
Answer Match 102.9%

This started happening two nights ago. When I search for an image in Google Images it brings up a list of images, but when I click on any of those images instead of the regular image preview page, it shows me a blank page with the title: "Redirect Notice" and the following text below it:


Quote:




The previous page is sending you to http://www.link.

If you do not want to visit that page, you can return to the previous page.




I searched online for a solution and some suggested deleting your coockies, Internet history and temporart files, which I did with no result. I even reset my computer to an earlier time but it didn't help.

This happens nearly all the time in Internet Explorer (ver. 9.0.8112). It doesn't happen as often in Firefox (ver. 14.0.1) but when I was testing the other day I saw it a few times in that browser too. I have run all the scans and attached the necessary files to this post. Below is my DDS.txt log. Any help is appreciated.



.
DDS (Ver_2011-08-26.01) - NTFSAMD64
Internet Explorer: 9.0.8112.16421 BrowserJavaVersion: 1.6.0_33
Run by Sunni at 19:11:48 on 2012-08-28
Microsoft Windows 7 Home Premium 6.1.7601.1.1252.2.1033.18.4063.2252 [GMT -7:00]
.
AV: AVG Anti-Virus Free Edition 2011 *Enabled/Updated* {5A2746B1-DEE9-F85A-FBCD-ADB11639C5F0}
SP: AVG Anti-Virus Free Edition 2011 *Enabled/Updated* {E146A755-F8D3-F7D4-C17D-96C36DBE8F4D}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-... Read more

A:Google Image search shows "Redirect Notice" upon click

Forgot to mention. The link in the blank page does actually take me to the image's website. This is not a case of redirecting to a different page. Similarly return to the previous page takes me back to the list of images. So it isn't preventing me from getting to the actual image but it robs me of the features the image preview page provides.

9 more replies
Answer Match 102.6%

Hello,
First let me tell you about my system.   This is an Inspiron
E1705/9400 laptop with the T7400 Core 2 Duo processor running at 2.16
GHZ.   It has 2 GB of RAM and a brand new 500GB Hitachi Travelstar hard
drive (7200 RPM).   It also has the GeForce Go 7900 GS video card.   
It previously had Windows XP Professional (32 bit) and worked fine.  
But, I have three computers in my home and home office and would like
them all to work better together on my wired home network, so I am
upgrading all three to Windows 7.   My two desktops (one is Dimension
XPS 420 and the other is Dimension XPS 430) seem like they will be no
problem to upgrade to Windows 7.   But, this laptop was not listed on
Dell's Windows 7 Compatibility List.   However, the Windows 7 Upgrade
Advisor that I downloaded and ran seemed to say that it was OK to do a
clean install of 32 bit Windows 7 and it only had a few minor concerns,
where it said to check for updated drivers from the manufacturer.   The
laptop originally came with a 100GB hard drive.   For my use, that is
getting very small, so I decided to get the same exact 7200 RPM drive
in the 500 GB size.   This will allow me to do a clean install of the
32 bit Windows 7 OS on the new hard drive and not have to wipe the old
drive to do it.   I can just hold onto the old HD and stick it back in
whenever I might ... Read more

A:Minor Problem with New Windows 7 Installation on my Inspiron E1705/9400 - two entries for "Base System Device" under "Other Devices" with yellow exclamation point

BTW, I just downloaded and installed the driver pack from that ftp location and it worked, even for Windows 8.1 - 64 bit.
Thanks Steve!

Roger

9 more replies
Answer Match 102.3%

Hi, new user here.

Well, bought an used notebook with some car diagnostics software on, and a hardware USB-interface.
The laptop though, runs a Windows 7 x64 Enterprise, which i believe is a "copy". The machine got a OEM Windows 7 x64 Pro sticker underneath.
Did try the downgrade trick, mentioned allover this forum, but for some reason it does not work.
I had to uninstall SP1, as I didn't have a SP1 DVD ready on hand.

When running the compabilityscan, I get the following error; (roughly translated from Danish)

"There is not sufficient discspace in partition (G . There must be at least 15 MB free space."

Note: Partition G: is a partition on 100 MB created by the Windows installation. Theres ~200 gig free on my SSD, which also held the G:, when the installation is started.

Any clues what to do from here?

Thanks.

A:Windows 7 x64 "downgrade" - Insufficient disc space.

Bump..

Is it really possible, i'm the only with this problem?

1 more replies
Answer Match 102.3%

My HDD shows 21GB+ free yet MS Word will not save and says "Insufficient memory. Not enough disc space". Norton AV and Trend Micro scans detected no virus, Add-Aware and Spybot found nothing either.

Had a quick read about [email protected] or [email protected] on Symantec's site and their fix warns that I may have to re-install Word afterwards.

Is there any way I can confirm this is the problem before I try their removal tool?

I have Word 2002 btw, any help will be appreciated,

TIA
 

A:Solved: MS Word says "insufficient mem. not enough disc space"

8 more replies
Answer Match 102.3%

Several times a day I get a message "Outlook Express. To free up disc space, Outlook Express can compact messages. This may take up to a few minutes" which is preceeded by 10 minutes of my PC being very slow. I have 50% disc space free (37GB out of 74). I run Windows 97. I have defragmented my disc several times. I have used RegCure regularly and it has made no difference. At other times, I try to start Outlook Express and a message comes up saying it is already running, followed a little while later by the above error message. Any ideas, please?
 

A:Outlook Express "To Free Up Disc Space"

7 more replies
Answer Match 102.3%

Hi all - I keep getting this message

"Low Disc Space" . When I click on the message it is
"D" drive, and the only thing in it is "the Recycle Bin" with 0 bytes in it!!

Can anyone tell me why I am suddenly getting this message? I am confounded

Thank you in advance. lennon

A:[SOLVED] "Low Disc Space" constant message!! Help -

Can someone please help me???

7 more replies
Answer Match 102.3%

I can't "extend" my "C" Drive even tho there is free space??
 
I have 251GB free and I cant add it to my C OS drive?
 
Picture:
 
http://img577.imageshack.us/img577/7577/helpc.png

A:I can't "extend" my "C" Drive even tho there is free space??

The Free Space is in an Extended partition.
Right click on the free space and delete the Extended partition. You can then extend the C partition into the Unallocated space released.

20 more replies
Answer Match 102.3%

Here's the story. I bought this new Samsung 840 250GB SSD.
I first did a clean install of windows 7 on it and it worked fine. Windows installed without much problem and everything. Then something didn't look right about the partitions. It looked like because I had all my HDDs connected while installing windows on the SSD the windows created the system reserve on the old HDD rather than the SSD. So I went back and decided to start from scratch with all the HDDs except for the SSD disconnected. I tried reinstalling windows on it but this time it didn't work. I tried formatting the SSD and it just gave me an error saying windows couldn't install on a GPT disk. I went into bios, made sure the PC was booting from the UEFI DVD drive and it still kept giving me the same error.

So I then booted up my old HDD. I tried formatting my SSD and now I can't delete the partition!
This is what my disk set up looks like:


If I click "extend volume" on the "New Volume (G" disk, it says "there is not enough space on the disk(s) to complete this operation".
If I try to create a "new simple volume" on the "unallocated" partition, it says the same...

Have I destroyed my new SSD now?! I just want it to work like a new clean disk...

A:If I try to "extend volume" it gives "not enough space on the disk(s)"

Hiyya Tracing try doing it with Partition Wizard mate Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition.
Brilliant tool if you can't do anything with the partition them just wipe the disk mate and start over with this SSD Alignment

1 more replies
Answer Match 102.3%

How do I enable "Mount Disc Image to Drive <whatever>" with Nero 6 when right-clicking an image file in Windows Explorer? I know it can be done but I don't know how. I have both Nero imagedrives enabled. My friend has the exact same version of Nero that I do and he has it enabled, yet he doesn't know how he did it.
 

A:Enabling "Mount Image" from Right-Clicking Disc Image with Nero 6

Actually I'm wrong. I have Nero 7.
 

1 more replies
Answer Match 102%

Good Morning,

I get random popups. I have run all available anti-spyware software and anti-virus software and it has not fixed this issue. Also after a clean reboot i only have about 5 min or so browse the web before i get a "cannot find server" screen. I can access the web with other programs ( worlds of warcraft is one).

I ran your Vundo utility per the directions i have seen on many of these posts and it did find and clean it up. I am still having some issues. IE still locks me out. here is my log.

Logfile of HijackThis v1.99.1
Scan saved at 12:29:32 AM, on 3/23/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\CTsvcCDA.EXE
C:\Program Files\Cisco Systems\VPN Client\cvpnd.exe
C:\WINDOWS\csifcsvc.exe
C:\WINDOWS\LogWatNT.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\Program Files\Eset\nod32krn.exe
d:\Photodex\ProShowGold\ScsiAccess.exe
C:\Program Files\Spyware Doctor\svcntaux.exe
C:\Program Files\Spyware Doctor\swdsvc.exe
D:\Alcohol... Read more

A:IE shows "cannot find server" Vundo found and fixed! still not working. help!

Bump!

19 more replies
Answer Match 102%

Hi,

I have been trying to use windows backup for system images. However, whenever I try to load a system image, i get this error "Windows cannot find a system image on this computer." The image is being saved in the correct location when I check the folder. However, when I perform the backup it appears that the backup process is finishing abruptly (the progress bar will jump from 75% to 100% way too fast).

I tried disabling my antivirus (Symantec Endpoint Protection 11.0.5002.333), and I tried running in Safe mode when performing the backup. The same thing happens.

I am saving the backup file on a 200gb partition of a RAID1 configuration, while the OS is on a separate drive in SATA mode. However I have another system with identical software saving to a RAID1 backup array, but it works perfectly. Only difference is the hardware (Intel+different mobo).

I really would prefer not to have to reinstall the whole OS to try to fix this, so any suggestions would be appreciated.

OS: Windows 7 Professional 64-bit (Student License, Downloaded File)
Mobo: Asus M4A79XTD EVO
CPU: AMD Phenom II 955
Storage:
2x 800gb WD Black in RAID1
OS on Intel 80gb x25-m

A:System Restore: "Cannot find a system image"

Try using the free version of Macrium Reflect instead. I don't have a Raid array, but I have a Raid controller and have had trouble restoring with some image backup apps. The new Macrium Reflect 4.2 works with my Raid controller(it's not the PC in my spec, it's my Vista64 PC with quad core and raid, HP Pavilion m9515y)

4 more replies
Answer Match 102%

when i open Partition Magic 8 i see my Maxtor 6Y120P0 drive in a yellow color and the file system marked as "other":

but my Windows 2000 Disk Management shows healty:
under windows i can read and write to the partition, so what is wrong? what does Partition Magic wants?

Thanks to ImageShack for Free Image Hosting
 

A:partition magic shows partition type as "other", windows shows "healthy"

Quote from Symantec:
There are currently no versions of PartitionMagic that support Windows® 2000 dynamic drives.Click to expand...
moper
 

1 more replies
Answer Match 102%

I've run SuperAntiSpyware, Ad-Aware, SpyBot and Norton which removed some trojan files and registry items but I'm still getting pop-ups ("Security System Warning" and "System Integrity Scan Wizard"). Below is my HiJackThis log. Thanks in advance!
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 5:00:21 PM, on 4/2/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\Program Files\Common Files\Symantec Shared\AppCore\AppSvc32.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\system32\cisvc.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\Program Files\Microsoft SQL Server\MSSQL$VAIO_VEDB\Binn\sqlservr.exe
C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
C:\WINDOWS\system32\cryptainersrv.exe
C:\WIND... Read more

A:"Sys Integrity Scan Wizard" & "Security System Warning" Pop-ups

Hi Welcome to TSG!!
Please visit this webpage for instructions for downloading and running ComboFix.

Post the log from ComboFix when you've accomplished that, along with a new HijackThis log.
 

1 more replies
Answer Match 102%

Hello All,

I started a few weeks ago on the PowerShell programing and I got my answer from here only. So am putting up the error that I am getting now to get some help again.

Scenario : I wrote a script that checks a Folder on a server and counts the number of files in it.Then when it finds the resulting number to be more then a specific value(threshold) it sends up a mail to the required alias. To break it all along the portion to send a mail is generated through DBmail using another .PS1 file.

In the PS1 file containing the main checking of number of files I am trying to pass 2 parameters :

1. Folder path on the server
2. the Threshold value of number of files

Now when I created a job to run this powershell script as :

& "C:\PowerShell\Power.PS1" \\XXXX\\c$\Documents and Settings\ABC\Local Settings\Temp 10


IT fails with the error :

A job step received an error at line 1 in a PowerShell script. The corresponding line is '& "C:\PowerShell\Power.ps1" \\XXXX\\c$\Documents and Settings\ABC\Local Settings\Temp 10'. Correct the script and reschedule the job. The error information returned by PowerShell is: 'Cannot convert value "and" to type "System.Int32". Error: "Input string was not in a correct format." '. Process Exit Code -1. The step failed.


I really can not move forward on this.

Please help.

A:PowerShell issue ('Cannot convert value "and" to type "System.Int32")

Just to add for reference Below is the code for the Power.Ps1 file that I have used :


param
(

[string] $directory_string,
[int] $benchmark

)

$date=get-date
[int]$directory_file_count = 0

# check that the directory exists.
$does_directory_exist = (Test-Path $directory_string)


# if it does, then continue
if ($does_directory_exist)
{


# Check for the number of files on the directory
$directory_file_count = (get-childitem $directory_string -name -recurse).count

# If number of files exceeds the limit, send mail to notify

if($directory_file_count -gt $benchmark)
{
& "C:\Powershell\DB_mail.ps1"
$subject= "XXXX"
$body= "XXXX"

}

else

{
& "C:\Powershell\DB_mail.ps1"
$subject= "XXXX"
$body= "XXXX "
}

}
else
{
& "C:\Powershell\DB_mail.ps1"
$subject = "XXXX"
$body = " XXXX"
}

5 more replies
Answer Match 102%

With EaseUS Backup Tool, I've cloned these two partitions ("System Reserved" and "C") to same-sized partitions on a external HDD ("X" and "Y"). Picture tells it concisely:
How to make drives "X" and "Y" boot-able?

In "Disk Management", I've noticed these partition labels missing:"X" (or "System Reserved") is missing System label,
"Y" (or "OS") is missing Boot, Page File and Crash Dump labels

Thank you!

A:Both "System reserved" and "C" partition cloned to external HDD: boot?

You cannot boot Win7 on external HD, unless it is connected via eSATA.

9 more replies
Answer Match 102%

There are 2 devices in the "Device Manager" that do not have drivers installed.

I just did a clean install of Window 7 SP1 32-bit to a Dell Latitude E6500. I have uploaded all the Windows updates and all seems to be performing well. However, there are two devices in the "device manager" that do not have drivers installed, and I can't determine what the devices are nor how/where to find the drivers for them online or elsewhere. The driverless devices are "Base System Device" and "Broadcom USH". When I look at the properties page of both devices, it says that the Base System Devices location is "PCI bus 3, device 1, function 3", and the Boradcom USH's location as "0000.001a.0002.001.000.000.000.000.000".

The laptop did NOT come with a drivers installation disk.

QUESTION: How can I identify what these devices actually are and, more importantly, how can I obtain the driver for them?

A:Can't ID driverless devices "Base System Device" and "Broadcom USH"

Well, as for the second part of your question......... have you tried using windows own driver update utility? Right click on the yellow exclamation point in Device Manager, choose update.

I'm thinking your "boradcom ush" is this, drivers for it are here too, :Broadcom USH - USB\VID_0A5C&PID_5800 - awdit - The driver, software, & hardware database

4 more replies
Answer Match 102%

Hi

New installation of windows 7 ultimate 32bit and on trying to copy a 38gb folder from c drive to d drive, pc gives bsod.
Lately playing world of tanks is resulting in system lock ups,please can anyone help

Frosty

A:bsod copying files from "c" to "d" drive and system lock ups

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

2 more replies
Answer Match 101.4%

it just happened out of the blue!

one day we wanted to print a document and it printed "all backwards"
well, I tried four more times and "it printed the same way FOUR MORE TIMES"..

then I went on some "advanced setting" and UNCLICKED this "MIRROR IMAGE" thingy majigy aaaannnd: "BINGO" the "effing thing" was fixed...

yep it "was" fixed only for that time...

NOW EVERY TIME WE NEED TO PRINT ANY DOCUMENT WE NEED TO GO TO THE "SETTINGS PANEL" (a general term) and "UNCLICK" the stupid "MIRROR IMAGE" thingy...

the real question: how can I prevent the computer to "defaulting to the MIRROR IMAGE mode"?????
 

A:printer always "defaults" to "MIRROR IMAGE"

You need to access your "settings panel" via the Windows Control Panel.
ie Start, Control Panel, Printers and other Hardware, Printers & Faxes.
Right click on the Icon and select printing preferences.
Unclick the mirror image
The settings will then be saved as your default.

 

2 more replies
Answer Match 101.4%

Hi guys, thanks ahead of time first off. This is odd, just tonight I got on Google Image Search and noticed that after showing all the thumbnails, once a thumbnail is clicked upon, it takes me right to the page without ever showing that 1 inch deep tab at the top it usually would stating "View Image in Full Size" and image my be copyrighted etc.... I have never seen this before. I rebooted the comp and it still does the same thing. I used system restore to a week ago and that solved the problem bringing the bar back LoL....but I had to undo it as the resotre caused a problem with my McAfee Antivirus! Arghhh....
Is this a simple settings thing I can fix? I am curious if it's a Google thing or an Internet Explorer 7 thing... I have Windows XP and its a Dell computer. On our other older computer it comes up normal with the bar as it always would on this one. I am not terrible computer literate but try my best. You guys always help out, so I appreciate this very much.

Thanks a ton again,

-Mike
 

A:Solved: Bizzare...Google Image Search no longer shows option "View Full Size"...

Well I spoke too soon....I apologize, I was going to delete this post but figured I would add what fixed it. I went to Yahoo and did an image search, and found that it gives you the "Full Size" option just like Google does. Then I shut the browser and fired up Google to mess with it more and Low and Behold it worked fine....what the heck LoL! Oh well it's fixed!
 

3 more replies
Answer Match 101.1%

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did an SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps\Toolbox\StatusClient\StatusCl... Read more

A:I cannot open "my computer" "control panel" "recycle bin", etc...

You may want to reinstall the operating system.

Backupthe files that are importantto you before you reinstall.

The "New" installation will overwrite the current one

If you do not format your hard drive before the reinstall the installation should not harm your files (That's why I suggest backingup your files) and will speed up the installation process.
 

1 more replies
Answer Match 101.1%

I tried to associate the file extension .txt to a new editor program
with the well known cmdline programs ASSOC and FTYPE.

No, assigning them through WinExplorer menu does not work.
But this is another problem which should not discussed here.

When I type now one of the following alternative commands at the CommandPrompt then Win7 returns me something like:

assoc .txt=txtfile

"Access denied"
The following error occurs: .txt"

or

ftype txtfile=D:\notepad++\notepad++.exe "%%1"

"Access denied"
The following error occurs: txtfile"

Why?

The command above work fine under WinXP

Peter

A:"access denied" when using "assoc" and "ftype" from cmdline?

Question:

Did you run cmd.exe with administrative previlliges?
Elevated Command Prompt

3 more replies
Answer Match 101.1%

Ok, so basically, whenever I turn the computer on, 3 error messages appear:

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee.exe

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee1.exe

- Error loading H:/Archiv~/GBPLUG~/gbiehcef.dll. Couldn't find specific module.

(sorry if some terms are incorrect, my computer is in Spanish, to I tried to translate as best as possible)

Please help me solve this terrible problem, it is really getting me on my nerves! (oh, and if this helps, I've recently donwloaded this so called "Limewire acceleration", and whenever I ran the setup, it didn't work. I don't really remember the name of the website I downloaded it from, sorry...)

A:Can't Open "My Documents", "Trash" or other files in "My Computer"!?

Hi and Welcome to the forum

I am almost certain that you have malware problems. Most like caused by you doing file sharing/ P2P - Limewire.

Suggest that you go here and follow the directions:

http://www.techsupportforum.com/secu...oval-help.html

Please be advised that the malware people are very busy and it could take a couple days to assist you.

BG

1 more replies
Answer Match 101.1%

OK.....
As I said I am new.....
Hope this info is the way you need it.
MANY MANY THANKS IN ADVANCE FOR THE TIME & HELP !!!
Check out the following .....HHEELLLPPP


Logfile of HijackThis v1.98.2
Scan saved at 12:38:36 PM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\logonui.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dellnet.com
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Micro... Read more

A:NEW THREAD / "xads", "xlime", "Context3.kanoodle"

hi

how to create a folder ?

right click anywhere in your desktop
click new,a tab opens ,click folder ,name it hjtantivirus .

download again hijackthis and install it in the new created folder .

your hjt is here now
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

it will not work properly if it stays there .

and don t create a new thread ,keep only one thread .this one ,now .

1 more replies
Answer Match 101.1%

Hi:

Looking for insight/advice re: KB3054476.

According to Infoworld, it was "Optional" in May, but I was not offered it then.
This week, it was offered as "Important" and "Recommended" (!), but only for one of my 2 Win7/64 boxes.

I have read the MS KB article, as well as THIS FORUM THREAD, the latter of which includes a report of a BSOD due to this particular update.

However, there isn't much out on the web about it.
And most of the discussion about it is overly technical for me.
And I am confused as to why it was previously offered as "Optional", but now is "Important" or "Recommended".

I don't *think* I "need" it (as I have no webcam on this box). And I don't like to tempt fate by fixing things that are not broken.

So, 3 questions:
Is it safe to install?
Is it really necessary/important?
Or would I be OK to hide it?
Thanks very much in advance!

A:KB3054476 offered as "Important"/"Recommended"/"Optional"

The status of updates changes with circumstances.
If an update isn't relevant, it won't be offered at all.
If however it's relevant but the related software is not apparently in use, it may be 'optional' - and gravitate to 'Recommended' or 'Important' if the related software is in use.
It can also be promoted through the hierarchy by MS depending on feedback through WU and error-trapped feedback.


If you have (and use) a webcam, then it's probably best to install the update.

4 more replies
Answer Match 101.1%

hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane

A:Remaking "My Music", "My Pictures", "My Videos" folders

  
Quote: Originally Posted by Legume


hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane


You have a backup from before the problem started? a win 7 dvd to do a repair install?
ken

4 more replies
Answer Match 101.1%

Yesterday I was on my client's Windows 10 PC.
In Explorer, I selected a .VHD file, call it MyVirtualDisk.VHD.
And ... a "Disc Image Tools" thing popped up at the top. I then right-clicked and saw Mount.
I was thrilled. I click Mount and it worked as desired.

Then I came home.

At home, on MY Windows 10 machine, I did the same: I selected a .VHD file and nothing happened.
Interestingly though: When I select a .EXE file, "Application Tools" appears.
So .... what do I do to get the "Disc Image Tools" behavior that I saw on my client's Win-10 PC?

A:How can I get a "Disc Image Tools" menu in Explorer?

Hello Donald, and welcome to Ten Forums.

Yes, you should have a Mount item in the context menu of VHD files. The tutorial below should be able to restore it for you.

Mount Context Menu - Add or Remove in Windows 10

2 more replies
Answer Match 100.8%

First things first, thanks to all who can help.....





I need to programmatically make some adjustments to the Internet Explorer security settings. Most of these settings I have found but there are a few I have not been able to get a clear exact location for in the registry. I will be using a .BAT file to make
the adjustments on 100+ PCs.





Here is what I am looking for.....





Under the "Internet  Properties" found in control panel, under the "Privacy" tab there is an "Advanced" option button. When I click on it I get an "Advance Privacy Settings" options box. On it are several settings.
The first setting, "Override automatic cookie handling" needs to be checked in order to access the other options. I can do that by adjusting the DWord value of "PrivacyAdvanced" under the "Internet Settings" key in the registry,
"HKCU\Software\Microsoft\Windows\CurrentVersion\Internet settings", to be specific.





What I have not been able to find are the registry entries for the "First-party Cookies" "Accept, Block, or Prompt" options, the "Third-party Cookies" "Accept, Block, or Prompt" options, and the "Always allow
session cookies" check box. Please see picture below....















I have seen references to the following settings as being where those options exist, but nothing that explains ... Read more

More replies
Answer Match 100.8%

My 1TB Western Digital External hard disc is not working. My laptop switched off suddenly while copying files. After restarted my laptop, when I try to open my External hard disc drive(G: \) I'm getting the message as

"Location is not available

G:\ is not accessible
The drive cannot find the sector requested"

The Properties of the drive shows as
Type: Local Disk
File system:
Used space : 0 bytes
Free space : 0 bytes

when clicking My computer->Manage->Disk Management(under Storage in left side), I can able to see my External hard disc drive(G: \). The File System shows as "RAW" before it was NTFS, % Free as 100% but I got around 1TB data. Also I checked in different laptops but it shows the same error.

And finally I checked with "Data Lifeguard Diagnostic for Windows", it passed the test.

I'm so afraid about my datas stored in the hard disc. All my projects, photos and many important files stored in that hard disc. I dont know what the problem is. I cant find any solutions in Internet. Please help me to solve this problem. Thanks in advance.
 

A:"The drive cannot find the sector requested" - External hard disc is not working

Hey Allen. I would call Western Digital support and see what they say.Since you have data on it you need, I wouldn't play around with it, get some answers from the drive makers, and as is always said, have important data backed up in at least 2 different places, with at least one being to CD/DVD.
 

3 more replies
Answer Match 100.8%

Hi!

Yeah so i've been searching some hours now for how to make my desktop look like this:
I don't care about the taskbar style, all i want is my desktop to look like that when i minimize everything, the clock and all! I think it's a really sexy look! I found the picture in an old thread on a forum and the user doesnt go there anymore. Im hoping someone here might have a clue!
I don't have any prior experience with this sorta stuff so im really clueless!

Thanks in advance!!

A:Trying to find this "theme" or "skin" or whatever to call it!

hi Lekandesanden, and welcome to sevenforums,

the clock and system information on the desktop looks like rainmeter.

i don't know which specific skin it is though...

looks like the screenshot originally came from here.

maybe you could try joining that forum and asking the OP - even though the post was nearly 2 years ago...

2 more replies
Answer Match 100.8%

I tried to record some audio with Auadacity but it won't work unless I enable the Wave Out Mix. I've tried the "right-click and choose Show Disabled Devices" trick but nothing shows up.
 

A:Cannot find "Wave Out Mix" or "Stereo Mix" in Vista

Bump.
 

1 more replies
Answer Match 100.8%

I have had this problem numerous times in the past where the installation proceeds then ends with the messages:

During the installation of the device.
The system cannot find the file specified
and it goes into a detection loop

HERE is the solution:

Windows 2000/XP has a bug that it cannot properly detect new hardware by *.inf files, if the RunOnce registry key is missing for the following location:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

This key is often used by installers to execute post-reboot programs, but sometimes they accidentally delete this key.

IMPORTANT: This article contains information about modifying the registry. Make sure that you understand how to backup and restore the registry, in case a problem occurs. Please read the linked Microsoft Knowledge Base article prior to editing the registry.
Go to Start » Run and enter "regedit."

Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

With CurrentVersion Highlighted, go to the Edit menu and select New » Key

Name the key RunOnce, leaving everything else about the key alone.

The RunOnce key should now exist underneath the CurrentVersion key.
Once the key exists, Windows 2000/XP stops redetecting the Hardware
 

A:"cannot find the file specified" "during the installation of the device."

16 more replies
Answer Match 100.2%

Hi TSG

My comp was messed up so I decided to clean reinstall xp pro, my hard drive was split into 3 partition, C, E backup and L photos and bits, at the point of the install were you decide,delete our make partitions, I decided to delete L as it was not needed and clean install onto C, leaving E with my docs and data, the install went fine, when I looked at my drives in admin tools the C is marked boot and E system, I was going to delete E and make new partitions, but because it marked as system, can not delete it. How did I do this and is there away to put it all back onto C, without reformatting.
 

A:Solved: partitions "boot" and "system" after xp install.

6 more replies
Answer Match 100.2%

When installing SP2 on my computer, there was a box that recommended "Backing up my system" before proceeding. So I created a restore point. I will install it on my daughter's computer next, and would like to know if I was supposed to do anything fancier than creating a restore point before installing SP2?
 

A:Does "Back up your system" mean "Create a Restore Point"?

16 more replies
Answer Match 100.2%

All of the sudden my "System Volume Information" folders (the system restore folders) on all of my hard drives are shown even when viewing hidden files is off. Tried to mark them hidden, but it won't let me. Anyone have a clue as to why they would suddenly unhide themselves and not allow me to hide them again? This is on XP Pro with no service pack1 installed. Just bugs me they did that all of the sudden. Haven't installed anything recently except Paint Shop Pro 7 and Easy CD Creator 5.2 plus the update patch to 5.3.

Thanks,

Smith
 

A:"System Volume Information" folder won't go "hidden"

11 more replies
Answer Match 100.2%

Hello all i need your help when i play world of warcraft and watch videos my computer will crash and go to a blue screen and say Bluescreen "hardware malfunction" "the system has halted" anyone kno what i can do?

 

A:Bluescreen "hardware malfunction" "the system has halted"

8 more replies
Answer Match 100.2%

After last night i have re-turn on my computer about five minutes ago............ i see on "My Computer" i have a new "strange" system drive named F: (C and D it's my HD... E it's dvd burner) whit label "SYSTEM" and i have tryed to access and result inaccessible.
The size it's about 100MB and 47,2 it's be filled but i can see what's inside and i don't have idea what's is that............. i thinks it's possible there's sometighs like a "hidden" partition but i don't even idea because now it's appears on "My Computer".
Yesterday and last night (before i go to sleep and turn off this same pc) there's no listed here................
If it's necessary i can post some pics.... or info about it... apparently there's a FAT32 partition.........

*EDIT*
I can add this info about this:
i have opened the diskmgmt.msc and here i can't see nothings about this newest drive F:.... look at here:
And here the the disk manager.. no F: appears:

A:Strange "SYSTEM" drive has been appears on "My Computer". What's it's?

See:

what is F System directory that suddenly appears in Windows 10

1 more replies
Answer Match 100.2%

Hi All,

Is there an easy to "split" a 40 Gb user file area into ten 4 Gb "chunks", for the purpose of backing up onto ten DVDs? In other words, is there an easy way to copy a 40 Gb file area onto ten DVDs?

Operating System is Windows 7 Enterprise (64 bit).

Thank you for your time and help,
Best regards,
James

A:"Splitting" 40 Gb user file system into ten 4 Gb "chunks"

Perhaps if you save to a FAT32 formatted partition.
This is automatically done by image backup software such as Macrium and Acronis.

6 more replies
Answer Match 99.9%

Hi folks.  This is after doing an upgrade from Server 2008 to Server 2008 R2 mind you.  Not sure if that matters.  

I was having problems with RDPing to my Win7 clients so I checked that remote desktop was enabled.  When doing so I saw that it informed me that I had to allow rdp access in the firewall which I know had been done before.  After looking around I realized that my network profile had been changed to "Public".  I also noticed that my active network shows as "unauthenticated".  What does this mean and how can I fix this?  How did this happen?  Thanks.

A:Network shows as "Unauthenticated"....Changed my network profile to "Public"

How many DCs are there in the domain?
I suggest that you remove the Windows 7 computer from the AD, and exit the Windows 7 computer from domain. Then, re-join the computer to the domain. How does it work now?
If the issue persists, please temporary disable the firewall on both computers. Also, please check if Network Location Awareness service is enabled on the server and Windows 7 computers.Arthur Xie - MSFT

30 more replies
Answer Match 98.7%

Hello everyone
I have this problem for more than 3 months for now...

The INSTRUCTION AT "0x00a96ce0"referenced memory at "000000000" couldn't be written".

That's always what i get when i restart my computer,just before screen goes dark.
I believe that it has to do something with Microsoft updates.The reason i believe this, is that i once reinstalled my PC and didn't have any problem until i didn't update my PC.
And i posted here that thinking my problem was solved but unfortunately i was wrong.

Please if you have any tips on this one let me know it would be greatly appreciated.

Thank you!
 

More replies
Answer Match 98.7%

Someone spilled a liquid on my wife's laptop damaging the keyboard and internals. It cannot boot but I need to get the files from the HD. I bought one of those USB to laptop HD cables, removed the HD and hooked the cable to my desktop Windows 7 PC. The drive came up as "System Reserved" with only the boot sector folders visible. I hooked it to an XP PC and autoplay showed all the folders but I couldn't see them in "Computer." I tried backing everything up to a DVD but it failed for some reason. This somehow may have damaged the drive.

The drive now appears and disappears in device manager. When it's listed, it shows as working properly but no longer shows up in Computer or Disk Management.

Any chance of getting files off of the laptop HD?

A:Need to get files from dead laptop- drive shows as "System Reserved"

Well.. it may be that the drive was damaged by all the shorting out possibly going on during the accident.

But I would try to remove the USB/HD cable as those can sometimes be problematic in various ways (like power issues to drive, and drive size issues etc).

If it is a sata drive you should be able to hook it straight up to the inside of a desktop and see how it works there. (Now I better C my A here and say that if the drive has been damaged electrically, hooking it up to your desktop could have some small chance of causing more damage there...)

1 more replies
Answer Match 98.7%

My MOBO is ASUS P4P800 Deluxe.
I just recently flashed my BIOS to the latest BETA version from the German ASUS FTP site in order to correct my compatibility issues detecting my 300GB Maxtor SATA drive.

All was perfect until I tried to connect my mobile phone via USB and something went wrong and it wouldn't detect properly. The phone does, however, show up under USB devices as MOTOROLA USB MODEM, like it did in the past.

So I don't know what's the problem... and don't know how related this issue is, but then I saw that under 'System Devices' there is 'Plug-N-Play BIOS Extension' listed twice.

First one is fine, second one shows an exclamation mark and under properties it says that there is some corruption in the registry or something.

I don't like exclamation marks anywhere under Device Manager. I hope someone can tell me how to fix this...

Do I look for a driver? And if so, which one and where? Is this 'device' suppose to be listed twice? Maybe I should just try 'removing' it?
 

A:'Plug-N-Play BIOS Extension' shows "!" under 'System Devices'...how to fix??

Click on update driver
 

5 more replies