Tech Problem Aggregator

Error copying file: Data error (cyclic redundancy check). CRC Scan ?

Q: Error copying file: Data error (cyclic redundancy check). CRC Scan ?

Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks

HDDStatus - Tool to check hard disk status, health and reliability

Hey,

I've been using GoodSync for the past couple of months to chain synchronize 3 hard disk drives and ran into my first issue today. GoodSync stopped responding whilst synchronizing changes to files so I used task manager to manually end the process.

I'm not entirely sure how much damage has been caused but when I re-analyzed the file changes a lot of the changes prior to the crash was no longer listed.. So I'm unsure of the file integrity but have so far noticed some music video files are corrupt with cyclic redundancy check errors but is not easily visible to check corrupt files because they still play but parts of data are missing.

I think I've experienced cyclic redundancy check errors before when my external hard drive fell flat on it's side whilst it was playing music (3 years ago). It took me a long time to filter out the bad files because all the mp3 files worked but some songs would randomly play in others etc.. is their some type of automated CRC scanner or method to check all my files ?

Thanks

A: Error copying file: Data error (cyclic redundancy check). CRC Scan ?

If you are able, try this programme, it is VERY good. HDD Regenerator - Dmitriy Primochenko Online

1 more replies
Answer Match 132.9%

---------------------------
Error Copying File or Folder
---------------------------
Cannot copy AVSEQ17: Data error (cyclic redundancy check).
---------------------------
OK
---------------------------

This error is generated most of the times while copying file from CD to my hard drive and the copying fails and the data is not not copied to the hard disk.

Someone please help me to get rid of this problem and/or tell me its cause!!!

THANKS!!!
 

A:Error Copying File or Folder:Cannot copy AVSEQ17:Data error(cyclic redundancy check).

9 more replies
Answer Match 115.5%

Hi
 
I copied some files from my old HP laptop with xp, burnt them with burnaware onto a dvd. Now on my new laptop (lenovo g580 W7 64bit) I tried to take them off the DVD and move to my local drive, when I was moving them from disc to drive explorer gave me a message saying 'Invalid MS-dos function' and the usual try again or cancel option.
 
Thinking some of the files on disc might be corrupt I ran
 
xcopy F:\*.*/s > C:\test1
 
And got the message in my topic title File creation error - Data error (cyclic redundancy check).
 
Now I don't have clue what this means and I can only tell you I have an output file in C, as per the command instructions, with almost all the files listed, some are missing but some of the ones there are the corrupt ones and some of the ones missing I think are fine.
 
Doesn't really lead me to the issue unless someone can decipher the error message I got?
 
Thanks
 
Andrew
 

More replies
Answer Match 111.6%

Recently I've been getting this message. Originally a game started crashing when it was opened, I tried uninstalling it, but certain files couldn't be removed due to cyclic redundancy. I then tried deleting the files/folders manaully but it just stalls (and causes computer lagging) and eventually comes up with the message in the title.
While it stalls I can hear the hard drive trying to access the files. I have previously gotten this message when trying to access files off a DVD but this is the first time its happened with files off the hard drive.
I also had to reboot my PC because the lagging was so bad, when it restarted windows had reset to its default settings, i.e. desktop pitcture, sound settings, folder settings etc. Luckily all folders except my desktop folder have not been affected.

What can I do to fix this problem?
I've reset windows to the way I like it, but I want access to these folders so I can sort them out.


Thanks.

A:Problem: Cannot delete 'file/folder name': Data error (cyclic redundancy check)

I rebooted again and my old windows settings returned, but I still can't access the file and folders because of the cyclic redundancy.

1 more replies
Answer Match 105.9%

This topic has probably been brought up many times before, but has there ever been a fix for the common copying error, "Data Error: Cyclic Redundancy Check"?

I know there can be many variations of the problem depending on where the data is being copied from and to, but I seem to have have found where the source of my problem is. I have been copying files (copy and paste) from 2 different makes of DVD onto my computer's main hard drive. The makes of DVD are both TDK DVD-R: an older style make with darker blue labels on the disks, and the current make of TDK DVD-R which has light blue labels.

Every time I copy files from the older style DVDs, I get the "Data Error: Cyclic Redundancy Check" notice which stops me from copying any more files from the disc. However, when I copy files from the current make of TDK DVD-R disks, all files are copied without any problems.

Is there a solution to this problem? Can the data from the older style of disks still be copied somehow? I find it strange how the error appears when copying from one make of disk, and doesn't appear when copying from the other. Any advice would be appreciated.

A:Cyclic Redundancy Check error when copying from DVDs to hard drive

When you say older "style", do you mean the disks are actually of greater age? Disks can certainly deteriorate with age. Do the same disks give CRC errors on another computer?

4 more replies
Answer Match 105%

Hello all,
Windows 7 doesn't recognize my SSD drive. When I go to disk management, it shows a message to initialize it (image no.1) but when I press OK to do that, one another message appears and says: Data error cyclic redundancy check (image no.2). My computer windows doesn't show that drive and also when I went to cmd->diskpart, again it didn't show that disk to use of chkdsk /f command. How to solve the problem please?
 

A:Data error cyclic redundancy check ssd

I could to revive that disk in diskpart using PartedMagic in boot. I've uploaded a new image from that. The remained problem here is that I can't delete it there.
 

5 more replies
Answer Match 105%

Hi guys,

I have WesternDigital Blue 1TB harddrive in raw format and I cant recover data nor format it.

Regards.

A:How to fix data error cyclic redundancy check

Your system specifications show a laptop.

But this seems to be an internal drive on a desktop.

If it is indeed an internal drive on a desktop, forthwith disconnect your faulty drive to prevent it keep spinning till you decide what you want to do with it.

Was it working alright in the desktop before and for how long?

When did it become RAW and for how long it remained connected after becoming RAW?

Do you want to format it now? ( I am asking this question because you tried formatting it.) I shall see your answers only tomorrow morning after 11 hours from now since it is already bedtime for me.

9 more replies
Answer Match 105%

Installed new HDD in the laptop - Dell Latitude D505
Formatted the new drive without partitioning.
Tried to install OS using the XPPro SP2 disc that came along with the latitude but keep getting a 'fatal error'

====FATAL ERROR=========

sxs.dll syntax error in manifest on policy file
D:\I386\asms\6000\MSFT\windows\control\controls\controls.man

DATA ERROR (cyclic redundancy check)

========================



H E L P !

(originally posted under 'Hard Drives' Topic. Posting here since it seems to be an XP issue ?)

A:Data Error: Cyclic redundancy check. !!HELP!!

Hi there..

have you checked the installation disc for any scratches, dirt, smudges etc?

May also be worthwhile cleaning the lens and disc :)

4 more replies
Answer Match 105%

I am getting a CRC Data Error when I try to copy something I burned on a CD (navigational charts 1-2 MB each is the largest). I have tried to reburn the CD and I still get the error, but it occurs at a different file location the second (3rd and 4th also) time.

I am using XP Pro, have 512 MB RAM, 2 GHz processor.

Are there any simple fixes to this problem?

Thanks.

george

A:Data Error: Cyclic Redundancy Check

See if any of this helps:What does 'cyclic redundancy check error' mean?

2 more replies
Answer Match 105%

I tried to hook up my mp3 player, and when that 'Found New Hardware' thing pops up at bottom-left corner then the actual screen pops up it says insert disk then I click next after like 5 minutes it says Data error (cyclic redundancy check) pops up how do I fix it
 

More replies
Answer Match 105%

Hey i'm trying to make a backup of a DVD to my drive and I continue getting the CRC error I've noticed that ever since I've installed SP2 on my XP Pro i've been having a lot of issues with my DVD burner... Does anyone know if SP2 has some type of security issue with DVD burners and burning actual video files? What I am planning to test out is removing SP2 and see what happens anyone has any ideas?

 

A:Data Error (Cyclic Redundancy Check)

I had the same problem, SP2 didnt let me use my Toshiba DVD-RW at all, so i uninstalled SP2 and it worked
 

1 more replies
Answer Match 105%

When trying to back up a large file from my hard drive onto a memory stick or CD-RW i keep getting a data error: cyclic redundancy check message just before completion.
What is this? and How can I fix it?

Thanks

JW
 

More replies
Answer Match 105%

Just like the topic title says, I have been receiving this message: Data error (cyclic redundancy check) when trying to install some software. The whole error reads:
C:\Users\Me\Downloads\ArtizenInstall_295.exe Error 23 while opening this file: Data error (cyclic redundancy check).
I've tried turning off my AV and UAC (just in case, who knows with computers) . . . I've cleaned my registry and run the disk check.
Any ideas? Let me know if I need to provide more info. Thanks, Kirk

A:Data error (cyclic redundancy check)

When seen with optical drives...that message usually indicates a problem reading the media. I would check the drive...and the media used.

If I received that message with every type of CD/DVD...I'd try cleaning the lens and/or prepare to acquire a new drive.

Louis

9 more replies
Answer Match 105%

My pc crashed on yesterday and was unable to boot into window as it required to run chkdsk and i found a lot file record segments were unreadable or corrupted. I changed the hardisk, installed a new os and then tried to back up some important files from the crashed hardisk but some was not able to transfer as a message pop-out stating data error: (cyclic redundancy check), my questions are :

1) Can those files under the data error to be recovered?

2) I read about the cause of it but is there any way to prevent from happening?

3) Is the hardisk still can be used?

I would be very appreciated if someone could help me out with this matter...

thanks
 

A:Data Error: Cyclic redundancy check

The harddrive sounds to be physically faulty
Therefore the data is probably corrupted in those sectors
I don't believe the HardDrive can be used again (and if used, it will slow your computer down)

Hmm, Make backups often to external media is always a good thing to do.
(Possibly a bit late to tell you that though)
 

10 more replies
Answer Match 105%

Hi,

Windows 7 doesn't recognize my SSD drive. When I go to disk management, it shows a message to initialize it (image no.1) but when I press OK to do that, one another message appears and says: Data error cyclic redundancy check (image no.2). My computer windows doesn't show that drive and also when I went to cmd->diskpart, again it didn't show that disk to use of chkdsk /f command. How to solve the problem please?

A:Data error cyclic redundancy check ssd

I could to revive that disk in diskpart using PartedMagic in boot. I've uploaded a new image from that. The remained problem here is that I can't delete it there.

4 more replies
Answer Match 105%

every time i tried to install a software/driver in my cd/dvd rom, "not responding" and "data error (cyclic redundancy check) message will come out.
can someboby help me about these?

A:data error (cyclic redundancy check)

Is the CD/DVD damaged?

Read this and tell me if this is what is happening: http://www.softwarepatch.com/tips/cy...edundancy.html

4 more replies
Answer Match 105%

as any1 figured out how to fix this problem, with out having to swap the disk for another 1 as i have just bought war lords battle cry 3, and it is a very hard game to get where i am, and it's uncommon for the stores to have an extra copy, i dont want to take it back and spend months searching for it again can any1 help me??

A:" Data Error (cyclic Redundancy Check) . "

That error message indicates reading problems...could be a dirty disk, could be a dirty laser, etc.

That's how it works in my world...

Louis

2 more replies
Answer Match 105%

please help me..
my system show "Data Error<Cyclic Redundancy Check>"

A:Data Error Cyclic Redundancy Check

At first you should run a chckdsk /r from an elevated command prompt on that drive
if that doesn't help try to test your drive with this
SeaTools for DOS | Seagate
If you have more questions, you should open your own thread. Or perhaps Shawn could move it to the right section?

-DG

2 more replies
Answer Match 103.8%

I have a SAMSUNG-HM400LI 400GB portable hard drive. Unfortunately i was transfering a large portion of data of data from it to another portable hard drive i have it froze, so i unplugged it, silly i no. Now when ever i plug it in it tells me "Disk must be formatted before being used", i have 400gb of valuable data i need from this drive. Ive tried different ways of getting into it through CMD, it wont even allow me to CHKDSK, replies with "Data Error (Cyclic Redundancy Error)". Ive tried using EASEUS Partition Recovery and still not luck, it tells me it fails to find the lost or corrupted partitions.

Can anyone help?
 

A:External HDD, Data Error (Cyclic Redundancy Check).

8 more replies
Answer Match 103.8%

I have DVD Shrink (latest) and I use it to make backups of (legally purchased) DVDs so the originals don't get damaged...So far I haven't had any errors with anything, with the exception of a largely scratched disk once... until nowI tried to backup "Inside Man" and it gets to around 2-4% (entire non-compressed disk backup, naturally) but then gives me DVD shrink has encountered an error and can not continue
Fail to read file E:\
Data Error (cyclic redundancy check)I've searched around and it turns to either be a bad/scratched disk or a new security measure...The disk is brand new with no scratches, finger prints or anything on it, and the movie played with no errors or bad frames (as far as I noticed) in DVD X Player (on computer) and on a sony DVD player (tv).I've seen people try with success using DVD Decrypter but when i tried, I got errors once again...so I'm fairly certain it's a security measure (seeing as the drive is only a few days old and plays/backs-up anything else fine)...Any ideas?

A:Dvd Shrink - Data Error : Cyclic Redundancy Check

Assuming the DVD is NOT damaged ...Many DVDs deliberately have bad sectors ro prevent DVD Shrik from working.Try http://www.1clickdvdcopy.com/Works for meBut it's not freeAll the best

1 more replies
Answer Match 103.8%

Hey,
I am trying to copy a file that is split up into various achieves. When the copying process is going on I get an error cannot copy file, data error (cyclic redundancy check). I want to get this thing to work asap. Any help will be appreciated. Thanks
 

A:Solved: Data error (Cyclic redundancy check)

A cyclic redundancy check means the computer can't read the data off the media. Typically this happens with optical media but also happens with HDD or other magnetic media once and awhile as well. If it's on a CD/DVD try cleaning the disc and the laser lens. If it's a magnetic media use check disc to repair any errors and try again. If that doesn't work then you can try a more aggressive recovery program.
 

2 more replies
Answer Match 103.8%

My HP Pro 4321s notebook (with Windows 7 Professional 32-bit installed) failed to boot up. 

As I did not backup the data files (this notebook was used for only a few months), I disconnected the notebook hard disk and installed it to an external disk case (SATA interface to connect my notebook harddisk and USB 2.0 interface for connection to other
PC or notebook's USB port).
After I connected this external disk to another notebook (windows 7 Professional 64-bit), a pop-up window asking me to run CHKDSK for SYSTEM (F:) appeared.  Therefore, I answered 'YES' to dismount the volume and proceed.  After CHKDSK
had finished for this drive F: , it showed file rec segment 96-99 unreadable. The CHKDSK report was then displayed.

Then, another pop-up window appeared :  Drive G:\  You need to format the disk drive before you can use it.  Do you want to format it ?

I replied 'No' and Message : 'Error :  G:\ is not accessible.  Data error (cyclic redundancy check)' was displayed.
The factory hard disk contains 3 drives : one is C:\, one is HP Recovery, one is HP_Tools and a hidden 'SYSTEM'.
The explorer could only showed properties of HP Recovery and HP_Tools.  'SYSTEM' properties could only be seen before I replied 'Y' to dismount the volume to proceed CHKDSK.
(Please refer to the captured screen below).

One more thing I would like to mention is that before the boot-up failure of my HP Pro4321s, the window exp... Read more

More replies
Answer Match 103.8%

Hi all,

I have posted in this forum as it is a combo question and not sure if it is the hardware or the software that is causing problems. If anyone has any ideas about the following I would be most appreciative.

Receiving error: Cannot copy XXXX Files: Data error (cyclic redundancy check).

System error showing on:
HP Pavilion
Microsoft XP Home Edition SP2
Unit: HP DVD Writer 640b (Standard)
Drag and drop copy from CD to the Hard drive
AND
Using the DOS program - error still shows in DOS.

ALSO on a 2nd System:
Receiving error:
Cannot move Files: Corrupted Files
(System freezes when I try to move them now)

System error showing on:
Toshiba Notebook M2 MSPA010A0M05
Microsoft XP Professional Edition SP2
Unit: MATSHITA UJDA750 DVD/CDRW

These files were originally burnt to CD using the following:
Hardware: LITE-ON Combo LTC-48161H
Software: BURN4FREE (Version unknown)
CD: TDK 700MD CD-RW80HS HighSpeed 4~12x Multi Speed Compatible
Files: Work files Zip compressed using WINZIP (current version)

Additional Info:
Burn4Free requested that the CD be finalised (though it is a CD-RW)
2 seperated DISCS are coming up with the error.
2 seperate systems reject the TWO discs.
The files don't seem to be corrupted (checked the system first, though on reading other postings of similar issues - it suggests corrupted files??)
The originals are no longer available (the system was formatted last evening).

Questions:
1: Is it a compatibility error between the 4 originals systems... Read more

A:Cyclic redundancy check - Winzip Data Error

A buddy of mine found bad media to cause this error. Are you using cheap discs? It is not uncommon for several discs on a spindle to be corrupted before you even use them. The problem my friend encountered was 100 unuseable DVDs!
 

2 more replies
Answer Match 103.8%

I just started to get this error message.

I am running a Win98 machine and receiving the error when printing on hy HP PSC 2210 printer. I recently started to use a TRENDnet 4-Port Bus-Power USB Hub (my PC only has two USB ports) and I was having no problems printing at all until just now. I did some research and found some solutions (ie turning off the printer, unplugging the usb cable, restarting, plugging in the USB cable, turning on the printer) but that did not seem to work. When I disconnect the hub and plug the printer in directly to the USB port I can print fine....so obviously the problem is with the hub.

Any ideas and also why it did work but now causes me problems.

I guess I should go out and buy a powered USB hub, but the ones I have seen don't seem to support Win98.

Any ideas?

Thanks.

Michael
 

A:USB Data Error(Cyclic Redundancy Check) when Printing

6 more replies
Answer Match 102.6%

My office manager has a program she was trying to install on a Windows 7 machine. It is new. When installing, it will not finish and gives the "data error (cyclic redundancy check)" message. I tried to install the same program on mine (also Windows 7) and get the same error message. What is strange is she had this same program on her last computer (also Windows 7) and it installed and ran fine. I'm puzzled by this.

A:Data error (cyclic redundancy check) when installing program

Welcome to our forum MRM4

Exactly what program are you referring to?

4 more replies
Answer Match 100.5%

I have been using Vista's Back-Up and Restore facility on my Dell Inspiron 6400 for quite some time now and have encountered no problems (aside from the fact that I question the comprehensibility of it). However over the past few days I have recieved an error message along these lines whilst trying to back-up: Data error (cyclic redundancy check). (0x80070017).

After restarting the laptop, repowering the external hdd, and attempting to re-run the process numerous times with it still refusing to complete, I deleted the entire back up and proceeded to create another one, with the same eventual error. I'm just really not sure what the problem is at the moment. If anyone could shine some light on the matter I would very much appreciate it.
 

A:Problems with using Vista's Back-Up Utility (Data error (cyclic redundancy check))

6 more replies
Answer Match 99.9%

is theres any to move the data off my book when i get a cyclic redundancy check error when I try to copy a file?
please help
 

A:How to I fix a cyclic redundancy check error when I try to copy a file?

10 more replies
Answer Match 96.6%

Im trying to do a clean install of Win7. Im installing it through usb i have already deleted the hard drive using Darik's Boot And Nuke.When i try to create a partition from the command prompt it gives me an error DiskPart Error "Data Error (cyclic redundancy check)" see the system event log for more info.

A:DiskPart Error "Data Error (cyclic redundancy check)"

Why are you doing all of those unnecessary steps instead of just booting the Win7 installation media to delete all partitons and then create New and Format using the drive options pictured in Steps 7/8 of Clean Install Windows 7? Nothing more is needed unless troubleshooting install failure.

If you did a secure erase using DBAN that is overkill intended to overwrite data to make it unrecoverable by forensics software. It is also hard on the drive.

Try now booting the Win7 installer to create the partitions. If the error repeats run the HD maker's HD Diagnostic extended CD test, followd by Disk Check from the installer's Command Line in System Recovery Options

9 more replies
Answer Match 94.8%

Please help as I don't know what to do about this file. I backed up my XP Home OS computer with my seagate goflex. It backed up 99% but failed to finish because of a pintlcsk.dic file. I then ran avast on my computer and it said the same file:
C:\WINDOWS\ServicePackFiles\i386\lang\pintlcsk.dic
could not be scanned due to "Error: Data error (cyclic redundancy check) (23)". No action could be taken with this file as when it was highlighted the apply button the apply button was not regardless of the action chosen.

A scan with spybot found no errors.

TIA,
Royal Flush
 

More replies
Answer Match 94.8%

I have an .AVI file on a CD which I am capable of watching from the CD.

When I attempt to copy this .AVI file to my harddrive, I receive a "cyclic redundancy error."

Is there any way to copy this .AVI file, without Windows trying to verify it?

Is there a way to do it in the Command Prompt? or DOS?

Please let me know.
 

A:Copying CDs w/ a Cyclic Redundancy Error

Use the "copy" command on command line. When encountering a read error, it will allow you to ignore the error and continue.

You could also take a look at a program called IsoBuster - an advanced tool that is built for data recovery from CDs.
 

1 more replies
Answer Match 93%

i have a toshiba 1tb harddisk. it was perfectly working til i gave it to a friend of mine. i have all my backup and most important data in it. i cant risk loosing it as i will loose my job. when he gave it back to me today and i inserted it in my usb this error came.
"Data Error (Cyclic Redundancy Check)"
.. i searched everywhere on the net but cldnt find a solution for it. i tried various methods . i can still see the properties which show only 86.4 gb free which means the datat is still inside.
when i tried a software to see the data inside all i could see was a recycle bin.
please help me anyway. i need my data all of it back. please is there anyway to get it back.

help.!!
 

A:"Data Error (Cyclic Redundancy Check)"

Right click on the drive, choose Properties > Tools > Check Now. It will attempt to repair the drive. But you might lose some data.
 

2 more replies
Answer Match 90.9%

I have a Fujitsu Siemens Amilo Pi 2515 running Windows 7 Pro 32 bit with an Intel Core Duo T5450 @1.67 GHz with 2 GB of RAM. This is a second computer, not the one registered in my profile.

I was hoping to take the Windows 10 upgrade but I will not do this before backing up the computer with a system image. I first tried to back it up to a Seagate 2 Tb Expansion Desktop drive which is pretty new and i have successfully created a system image on it for my other computer using Acronis True Image 2015.

I only have the 1 computer license for Acronis and I don't particularly want to get another for this machine. Windows Backup should work. When I first tried to cack up to the 2Tb drive I got the error "the request could not be performed because of a I/O device error. I tried twice. Each time the backup runs through to completion but finishes with this error.

I have another smaller Seagate 500 GB external drive, so I tried to run the backup to it. This backup also ran to conclusion then dumped the 0x80070017 CRC error.

I have read other threads with this error but, having just had help with a different problem on my Acer 4810T (being a problem with Windows not genuine messages) where I was advised to submit a new thread rather than act on suggestions in other threads, I thought I should do that with this problem.

Despite the I/O error, there are backup files on the Seagate 2TB drive in 148 zipped folders taking up 25.8 GB of space. There is 62.9 GB used on C: d... Read more

A:0x80070017 cyclic redundancy check error after I/O device error

The I/O error could pertain to the C: drive itself, it may not necessarily be the external HDD that's throwing up that error. You could try the alternative of creating an image with Macrium Reflect linked in my signature to see if that works.

4 more replies
Answer Match 90.3%

Hello everyone!

I'm having this error that says cyclic redundancy check when i use my p2p programme, or try to install programmes, or like when i open a folder with large format pictures in it.
The laptop just stops working for a while, and i can hear a specific sound when it does.
I don't know how to fix this error, or CAN I FIX IT????

I have an urgent exam on tuesday and if i don't install corel draw, i'm gonna FAIL.

Please can anyone help me? i'm really desperate..>_>

P.S. I recovered my PC like 5 times now...>_<''

A:Cyclic Redundancy Check ERROR

Hello!
Are you attempting to install the program off of a CD or dvd? Because if its scratched that would explain the error and the noise your laptop is making (its actually the cd/dvd rom).

2 more replies
Answer Match 90.3%

I cannot belive this sound card it is driving me nutz!! Im running windows 2k with a soundblaster model ct4740 and i cannot get the thing to work for nothing. I try to use the auto-run on the cd to install the driver that doesn't work the cd is useless or something so then i try to install it manually and it wont do it then either it gives me cyclic redudndancy check error and wont install and i can't figure it out.. Can someone help a bro out... dont tell me to download the most recent version (already tried that...) im not a geek but i do know my way around computers hehe thnx a lot for any feedback i may get.. sorry if this seems like and edgy post im a lil on the pissy side today sorry..

peace~!
 

A:Help! Cyclic Redundancy Check Error

12 more replies
Answer Match 90.3%

Hi,
so earlier in the year my OS hard drive crashed, and I haven't had time to work on the problem until now. (Seagate Baracuda 3.5" 500GB 7200rpm, running Win7)

I docked the HDD and plugged it into my girlfriend's laptop with a USB cable, and the drive shows up under Disk Management, but there aren't any options for mounting or formatting.

I tried running DBAN from boot, but I get non-fatal errors and the program won't run. (It runs fine with other drives)

My biggest concern isn't getting information from the drive because I was only using it (primarily) to boot from and to store my programs. No, my concern is whether or not I can salvage the drive and re-use it. I'm not that interested in buying (another) hard drive.

So I guess what I'm asking is for a litter direction and advise. All is appreciated.
Thank you very much,
J.O.
 

A:Cyclic Redundancy Check error on HDD

8 more replies
Answer Match 90.3%

I recently tried to reinstall Star Wars Galaxies on my computer. Nearing the end of my installation a message pops up telling me that theres been an error in the installation. The message is as follows:

Componant: Star Wars Galaxies
File Group: SWG Files
File: C:\Program Files\StarWarsGalaxies\qt-mt305.dll
Error: Data Error (Cyclic Redundancy Check)

I have no idea how to fix this problem. Please help!
 

A:Cyclic Redundancy Check error?

9 more replies
Answer Match 90.3%

Hi,

I have a WD 500 GB external drive, ive been using this as my back-up for about 2 years. It was just recently, when i open my files and folders, and error pops-up "Cyclic Redundancy Check". I tried to reformat the drive but it says that it is being used by another program, it assigned a drive letter but i cannot open it. i also tried formatting it via CMD, but no luck is stays at 0% completed.

Any help or advice if i can still revive my HDD? if i can recover the files.

Thanks

A:Cyclic Redundancy Check Error!

Unfortunately a CRC error can be bad news. Check some of these pages:
https://www.google.com/search?site=&....0.3hf81MhrWuA

2 more replies
Answer Match 90.3%

well i could always play warcraft 3 the frozen throne then all of a sudden yesterday i get this error whne i try to enter games
 

A:cyclic redundancy check error TFT

9 more replies
Answer Match 90.3%

In trying to delete a file, I got the following error message:

Error Deleting File or Folder

Cannot delete sspsetup1977_: Data error (cyclic redundancy check).

How do I get rid of this file?

I'm using XP.
 

A:I got a cyclic redundancy check error

9 more replies
Answer Match 90.3%

Cyclic Redundancy check error

A:Cyclic Redundancy check error

More information would be useful. When did you receive this error? Are you still able to boot into Windows?

If so, go Start > Run > Type in chkdsk C: /f /r (Assuming C: is the drive that threw the CRC error)

2 more replies
Answer Match 90.3%

wester digital caviar blue 500gb hd when connected internally and installing OS win 7 it want format error code 0x8007045D comes up. When externally connected it says cyclic redundancy check error.How do I format it. Please enlighten me, thanks.
 

A:Cyclic Redundancy Check Error

10 more replies
Answer Match 90.3%

Hi
I got some data in a folder... I'm not able to move it... Everytime i try to do that, it gives a cyclic redundancy check error. tried to delete the folder too (i dont mind losing that data), but am not able to... and cannot format the partition as it has a lot of work data and i do not have a spare hard disk. please suggest any methods to tackle the issue...
 

A:Cyclic Redundancy Check Error

12 more replies
Answer Match 90.3%

I get this "cyclic redundancy check error" when I try to copy files from a DVD-RW onto my hard drive. I burnt said DVD about two years ago using Cyberlink DVD Solution Power2Go. I get this error with mulitiple DVDs, but not all of them (I've got five and I get this error with only three). Also, I get the error with some files, but not others (on the same DVD). I really can't lose these files! My guess is they were burnt wrong, but I'm really not sure. Is there any way I can recover these files?

Oh, I'm using XP SP3.

Thank you!
 

A:cyclic redundancy check error

13 more replies
Answer Match 90%

HI there,

first time being in a forum as the support from LaCie is rather bad.

Here some info on the equipment:
Operating System & Version: VISTA

I plugged the hard drive into the laptop to add data. First it was recognised and than all of a sudden it just showed the external hard drive without name (before it always showed in the recognised devices the name of the hard drive LaCie). Now it asks me to format the drive but as I don't want to loos all the data which are on the device I am hoping that you can tell me what the problem is and how to solve it.
(I tried it with a different computer but the same problem).

[Answer from support: The drive should not be reformatted to afile system other than FAT32. If the drive is formattedin a non-FAT32 format (such as NTFS or HFS+), files will NOT appear on your television screen.]

Also you might like to know that I can use the hard drive with an HDMI cable connected to my TV. SO I can actually still watch my movies and listen to the music on it.

1. Pc recognises the drive but I cannot access it (can't add or deleat files on the hard drive)
2. Cables are working (exchanged cables to check if that might be the problem)
3. Connected the hard drive to a different computer - same problem
4. Hard drive works fine when I connect it to a TV to watch movies or listen to music

As I am not a specialist I need a step by step help to recover my files before I reformat the drive.
 

More replies
Answer Match 89.4%

I own two identical laptops. Both started having the same problem two days ago. Model is CQ61-410US Notebook from Compaq. Running Windows 7 Home Premium. 64-bit operating system.
I started getting a cyclic redundancy check error (error_crc error per MS Windows). The error occurs when I attempt to syncronize either of my two laptops with the ACT software from Sage loaded on the remote server. I have been successfully syncing these laptops for the two years in the same fashion. Only today have I begun having this problem. And I have two other computers that are syncing without a problem. I did a restore back to yesterday morning before a Windows critical update was installed. That did not help. Because it is a problem with only these two laptops, my suspision is that it has something to do with the laptops and some kind of an update that has affected them. Any help would be greatly appreciated!

Sync file from today from one of the two clients not working:

======= SYNC SESSION - 2/1/2012 12:04:48 PM ========
[ Info | 2/1/2012 12:04:48 PM ]Message: Sync remote client created. [ Info | 2/1/2012 12:04:48 PM ]Message: Checking if schema changes are available for sync. [ Info | 2/1/2012 12:04:50 PM ]Message: Client establishing synchronization with server database: SERVER_5_28_10 [ Info | 2/1/2012 12:04:56 PM ]Message: Initial Handshake completed. [ Info | 2/1/2012 12:04:56 PM ]Message: Checking if data changes are available for sync. [ Info | 2/1/2012 12:05:00 PM ]Message: Clie... Read more

A:Cyclic Redundancy check error error_crc

a crc error may point to corrupted data. please try running chkdsk on both PCs. What really concerns me is it's happening to both computers.

Please do this first and get back to us.

7 more replies
Answer Match 89.4%

I've concluded that this an OS issue and not hardware so I'm re-posting it under XP.. (please remove the post under Hardware Internal..)
ty
----
Please.. anyone tell me how can I run chkdsk /r when a pc stops at boot with message ; following file is missing windows/sytem32/config/system" can I run it from a windows XP install disk ?
------

ORIGINAL message appeared opening IE ;

'cyclic data redundancy error ' ( this is on drive C the os drive )

I've seen a few posts about this error so is the common solution to run the manufacturers diags , which would be Dell I assume? its a dell
optiplex g280 low-profile type box.. I've never encountered this error so any info is appreciated.

peace

~dtm~

A:cyclic data redundancy error (drive C - os )

http://www.softwarepatch.com/tips/cyclic-redundancy.htmlWell...you may have concluded incorrectly, it's hard to say.My experience with these types of errors...usually involves an optical drive, not a hard drive. If I received this error on a hard drive, the first thing I would do is run a check of the hard drive. Initially, I would try running chkdsk /r from the Recovery Console of my Microsoft XP install CD. If that failed, I would download a hard drive diagnostic utility from the website of the hard drive manufacturer and run it, following directions provided.The first thing I would suggest...move any data on that drive which you want...to another storage device. This should be done before attempting any checks of the hard drive in question.Louis

2 more replies
Answer Match 88.5%

I tried to install Juiced on my computer but in middle of installation i get this error..

Feature: Data
Component: movies
File: E:\data2.cab
Error: Data Error (cyclic redundancy Check).

When i install this game on other computer it doesnt give any error.
how to fix this problem??
 

A:Cyclic redundancy check Error while installing the game..

10 more replies
Answer Match 88.5%

Every time i try to back up my files to the hard drive i get the above error code showing up on data(d) and it keeps saying last back up failed. I have done a disk check and it came up with number of root causes 1. Whatever that means cause i am a 60 year old layman at this computer game. I have defraged my discs as well, but i still keep getting the same response.
So if somebody could help me with this problem in a non tech language that i can understand, it would be very much appreciated.

A:Cyclic redundancy check error code 0x80070017

Are you backing up your files to your C: drive? or another hard drive.

Go to Start > All Programs > Accessories > then Right click on the Command Prompt, then select Run As Administrator.

In the Command Prompt window type chkdsk /r you will need to restart your computer for chkdsk to start.

If your backups are on a different hard drive then run the Elevated Command Prompt as stated above. chkdsk X: /r ( With X being the drive letter of your second hard drive)

4 more replies
Answer Match 88.2%

When Outlook 2002 begins, it displays reminders that I have setup in the calendar.

But last week it started giving me an error message when I try to dismiss the reminders:

The reminder could not be deleted. It may appear again. Outlook.pst could not be accessed. Data Error (cyclic redundancy check).​
It also won't send/receive.

Do you have any suggestions or have any idea what is wrong, and how to possibly fix it?

I'm not a techie, so please explain for dummies.

Thanks so much!
 

A:Outlook 2002 cyclic redundancy data error

sounds like your pst file is corrupt.

Follow the steps below (take your time) to help re-create your pst file.

The instructions can be found here also (http://support.microsoft.com/kb/319128)

Re-create Your Personal Folder File
1. Quit Outlook, and then start Windows Explorer.
2. Make a backup copy of your personal folder file (Outlook.pst).

Outlook.pst is usually located in the following folder:
Microsoft Windows XP, Microsoft Window 2000, and Microsoft Windows NT 4.0:
drive:\Documents and Settings\UserID\Local Settings\Application Data\Microsoft\Outlook
Microsoft Windows 98 Second Edition (SE) and Microsoft Windows Millennium Edition (Me):
drive:\Program Files\Common Files\System\Mapi\LocaleID
Drive is the drive letter of your boot drive, UserID is your user I.D., and LocaleID is the locale identifier (LCID) for your installation of Microsoft Office. For example, the LCID for English (United States) is 1033.
3. Rename Outlook.pst as "OLD.pst". To do so, follow these steps: a. Click Outlook.pst.
b. On the File menu, click Rename.
c. Type OLD.pst, and then press ENTER.

4. Use the Inbox Repair Tool to repair the OLD.pst personal folder file.

For additional information about the Inbox Repair Tool, click the following article numbers to view the articles in the Microsoft Knowledge Base:
272227 (http://support.microsoft.com/kb/272227/) How to find and run the Inbox Repair tool in Outlook 2000
287497 (http://support.microsoft.com/kb/287497/) How to use ... Read more

2 more replies
Answer Match 87.6%

Recently I bought a new Star Wars Galaxies disc set after my old one got destroyed and I was hoping to play but when I started to install the new disc I got a cyclic redundancy check error. I used to have Star Wars Galaxies installed on my computer so some left over files from that could be interfering with the installation. It says the error is with a file called data2.cab. I'm not sure how to fix this and any help with be appreciated.
 

More replies
Answer Match 87.3%

Hi, I just received my new Hard Drive after my old one had to be send away because it stopped worked due to cyclic redundancy check errors. After reading several different articles and threads about this I'm still not really sure what CRC is (don't really care) but was wondering if there was any way to be sure it doesn't happen again to this new hard drive.Should I format the HD before use or do a check disc or something?

Thanks
 

More replies
Answer Match 86.7%

I keep getting this messege when I try to shift files from one drive to another. It refuses to move the files saying cyclic data redundancy check has failed and the file cannot be moved. First I thought it was a problem with my old Seagate Barracuda 7200rpm 120GB hard disk, But I got the same error ystrdy on my brand new 250GB barracuda.

Does this have a solution?
I an using WinXpsp2 which is updated till day before.
System specs: 915gav mobo with 3.2Ghz proc. 1.5GB RAM

A:cyclic data redundancy check

Hi rapchik...

are you transferring files between these two hard drives or just moving them about in one or the other?

This is usually a sign of some bad sectors on the hard drive. It may be an idea to run chkdsk on them:

- Click Start -> Run -> type:
cmd
- Click OK
- At the flashing cursor type:
chkdsk /r /f c:
- Press Enter then Y then Enter then Y to confirm again
- Now reboot and let it scan...may take 10 minutes or so

If you're having the problem on a different partition, all you need to do is change the c for another drive letter i.e chkdsk /r /f d:

Hope that helps.

p.s - It may also be an idea to think about backing up any vital data just incase your hard drive is having issues....also, you could download the manafacturer's hard drive utility tool which you can use to run some checks on the drive.

10 more replies
Answer Match 86.1%

Hi. I backed up my pst file to a dvd. Now upon install, i get the following error message

cyclic redundancy error

The file will not copy to the hard drive for reinstall into outlook.

How do if fix that pst on the dvd? The original pst is not available.

rgds
mark
 

A:cyclic redundancy error on pst file

7 more replies
Answer Match 85.8%

I have a 250GB Hard drive that isn't an external one. It was actually originally in the ps3 but i took it out to fix problems in getting the ps3 to work right (recently it stopped working.) I plugged it into my computer and I can't get it to work. I can't format it because it keeps giving me the cyclic redundancy check error and it's being registered as un formatted space when it should be FAT 32. I really need it to work again. Any help will be great! thank you. I have no idea what to do.
 

A:Solved: HELP! Hard drive isn't working properly cyclic redundancy check error

6 more replies
Answer Match 85.8%

ok my hard drive goes through alot. i bring it to work and friends house but recently i pretty much filled it up to about 15 gigs from full capacity then when i was in a friends house and i tried to transfer some tv programs to catch up on but the speed was unbelievably slow. i put it down to the hard drive being so close to full so i said fine. then i brought it home and plugged it into my ps3 so i could watch some movies and i watched one movie no problem and then about half way through the second the ps3 froze but didnt crash just came out of the movie i was watching and now the read speeds are unbelievably slow and the ps3 or computer freezes while trying to read just the folder list in explorer and sometimes the crc error comes up and what i have seen on the internet that is normally to do with cds/dvds not external hard drives. anyways i bought a new 2tb hard drive and tried to copy some files over and it just seems to stall and not copy the files. i had intended copying the files then reformatting the hard drive but it seems to be something more serious than i thought. i dont know what it could be so i am looking for a different prospective. can anybody help me?

Thank you in advance for any help that you ay give.
 

A:cyclic redundancy check error on a western digital external hard drive (1tb)

8 more replies
Answer Match 80.4%

i have been using tc for a while but never seen these errors

i am trying to copy large amount of files and i periodically get

read error: data error (cyclical redundancy check)

on a random file, then the program sort of hangs, pressing skip does nothing, only solution is to cancel.

--

also, is read error: data error (cyclical redundancy check) meaning the source or destination?? you see it throws error on the same 3 files and then freezes on the last file in view in the image

i cant open the folder and don't know if/how i could bypass the bad files and copy the rest of the folder

A:read error: data error (cyclical redundancy check)

This simply means there is a bad sector in your hard drive. Although this article is old, it would really help you to fix the problem: How do I fix a cyclic redundancy check error when I try to copy a file?

3 more replies
Answer Match 79.2%

It's have error message when i copying dvd to hdd.

How to fix it ?
 

A:Can't copy DVD to HDD => Error "Cyclic Redundancy Check"??

I think your DVD may be scratched. I've had this happen. Try cleaning the disk and try again,sometimes this works,sometime not.
 

3 more replies
Answer Match 79.2%

Apologies if this isn't the correct forum but im having problems saving spreadsheets in excel. When saving to a specific folder on my hard drive I receive the error message "Data Error (Cyclic Redundancy)". It doesn't happen every time but most of the time. It only happens in Excel and only happens when saving to one specific folder. Does anyone have any ideas about the problem?

Thanks.
 

A:"Data Error (Cyclic Redundancy)" - message received when saving in Excel 2003

The hard drive has a bad sector under that folder?

Test the hard drive with the manufacturer-provided utililty to confirm.

The bad sectors can be marked unusable with the chkdsk utility to make Windows work around the bad areas, but you should consider repacing that drive.
 

2 more replies
Answer Match 108.36%

I desperately need to retrieve backup files from an external HD, but i'm getting the following error..

Location is not available
G:\ is not accessible. Data error (cycle redundancy check)

I've tried Recuvu with limited success.

A:Data error (cycle redundancy check)

As far as the system is concerned, there is nothing on G - it is 100% free. But you can try chkdsk /r. Maybe it can fix it. Some people also were successful with this program : Rescue Kit Free Edition | PARAGON Software Group - free partition software, hard disk partitioning

Next time make frequent backups of your stuff.

3 more replies
Answer Match 108.36%

I'm not sure if this is the right forum to post this question but I have a question about "Data error: clinc Redundancy Check"

I was trying to copy some AVI files from a CD-RW onto my desktop.. but during the process I get a message saying "Cannot Copy File or Folder Data Error: (Clinc Redundancy Check)". I would like to know what does this mean? I thought there was something wrong with my computer, but i tried it on another computer and still had the same problem.

Is there something i can do to make that error message go away so i can copy my files successfully.

Thank you in advance.
 

A:Need Help -- Data error: clinc redundancy check

Did you mean "Cyclic Redundancy Check"? This is also expressed as CRC. CRC is a way for computers to verify that the data it is getting is not corrupt or tampered with. When a byte (series of 8 bits) is transmitted, it is often sent with a CRC bit tacked to the end. Based on a computation of the 1's and 0's that form the byte, the CRC bit will be a 1 or a 0. If, on the receive side, after it receives the byte with the CRC bit, it runs the same computation on the 8 bits. It then checks the CRC bit and if it does not match, you get a CRC or Cyclic Redundancy Check Error.

Hope this helps.
 

1 more replies
Answer Match 106.68%

I resently reformatted my HD and copied my music and misc. file to disk. I use 2 dvd-rw because they can hold 4.7 gb. I burnt them with DeepBurner (freeware b/c of virus deleting .exe of normal programs) and now when im using the windows drag and drop from the cd to a folder only 1/3 of the music copied the rest give me this error.

After "cannot copy" it says the file names. I sure hope I can get these files on my HD or my sister is gonna murder me. a lot of it is her music. AHHHHH

any help would be appreciated

~steve~
 

A:"Cannot Copy : Data Error (cyclic Rednunancy check)

First off to eleminate this as a potental problem, clean the cd. If you have a rotory cleaner that would work great. If not, try a very fine thread cloth

Edit>> Just noticed your sig. I used to be in the same boat, untill I started charging them for repairs
The way I see it they can let the computer go to crap becouse of their bad habits (never running spyware killers or Antivirruses, installing AOL software and the such, ect.) or pay me to keep up on its matanance. At first my family said "No way!" but after a month of the computer completly stalling up every other hour they finaly saw it my way
 

2 more replies
Answer Match 105.42%

I use DVD shrink to copy movies. Occasionally, I will get a "cyclic Redundancy error". I've read that cleaning the dvd may get rid of the problem, but it hasn't. Is there a free download I can get to correct the problem. or can you recommend one to purchase that will solve the problem?

A:cyclic redundancy error

A CRC error is usually because of problems copying/burning a file. The first thing to try is burning at a slower speed - that usually eliminates the problem.

1 more replies
Answer Match 105.42%

I formated my computer not to long ago and made backups of all of my files as data on DVR-'s. When I got the computer back up and running again it wouldn't copy the files back on the computer. I tried to just copy a folder at a time and move them over but this is the error I get...

Error Copying File or Folder

Cannot Copy Run: Data error (cyclic redundancy check).

if someone could please help me, I have a lot of music and files for work and school that need to be recovered. Thank you.

A:cyclic redundancy error

I did some extensive reading on this subject and there are many reasons that could cause this. Ill try to sum them up and make some suggestions.

The disc could be dirty, scratched or have fingerprints. Take a very close look - and if needed clean it according to instructions how to clean disks (google if you are unsure).

The disc was dirty, scratched or had a fingerprint on it and when you burned the data it messed up the write process. I dont know if you had the DVD verfied after to make sure it was ok. So it could be this or it was a "bad burn" (bad media). Shouldnt be the case if you had the DVD checked after the burn though.

Sometimes for odd reasons a drive just doesnt want to read a certain disk. Try to read the information on another PC.

1 more replies
Answer Match 105.42%

I am trying to copy my MP3s from a CD-RW to my hard drive. I'm using Windows Explorer, drag and drop, and it starts to copy and stops after a bit and gives me one of two errors:

Cannot copy - data error cyclic redundancy check

or

Cannot copy - invalid MS-DOS command
and from that point on, i can't copy any other files from that CD. However, these MP3s do play back on windows media player!!

My OS is windows xp home, and the CDs were burned using adaptec easy CD Creator, which i have un-installed. I have been able on a couple occasions to copy the files by closing explorer, ejecting the disc, then doing it all again.

What could be my problem?
 

A:Cyclic Redundancy Error

12 more replies
Answer Match 105.42%

Hello,

I recently ran an anti-virus scan with Avast and noticed at the summary there was an error: "some files could not be checked, cyclic redundancy error". My meager tech skills tell me I should run chkdsk.

For reference the hard drive is 7 days old. If anything I did in this thread: http://forums.techguy.org/windows-vista/989144-solved-problems-after-install.htm kills hdds let me know.

Thank you for your time.
 

A:Cyclic Redundancy Error

Well, chkdsk replaced 256 "bad clusters". Is there any way this is not a bad thing, or am I looking at replacing the drive?

As a side note, after the check Vista now boots much faster. Before the chkdsk it would hang on a black screen, now it just goes straight to log in.
 

2 more replies
Answer Match 104.58%

Last night i lent my laptop to parents, and sure enough i got it back and something was wrong. I ended up turning it on (obviously) and it took for ever to load. When it finally did, no desktop or nothing. So I ctrl+alt+del and checked the processes, explorer wasn't there. So i ran it, and it says:

explorer

Data error (cyclic redundancy check).

So I'm thinking if I get a copy of a XP CD, I can use the repair function to fix this, or overlap-install the same copy of xp?

BTW, i have a 1.6 Toshiba laptop, came with vista so i installed XP Student Professional. I have a midterm in close to 3 hours, and I need my files back. Anybody thinks they can give me a shout?
 

A:Cyclic Redundancy Error on EXPLORER.exe

can I get a little hand here? Time is not my friend today, not trying to sound rude just agitated...
 

2 more replies
Answer Match 104.58%

Tried restoring GF's old gateway laptop and upon the "installation of windows", I get the cyclic redundancy error message. I know the drive works fine b/c I am able to boot up a software disc from work (geek squad). I tried another OEM OS and it keeps going to "resuming install" screen and displaying the same error message. I think it may be on a loop.

How do I fully restart the installation process of XP from step 1?
 

A:Solved: Cyclic Redundancy Error

Could you just format the drive and start over?
 

3 more replies
Answer Match 103.32%

I just set up a computer with a fresh install of Windows XP. All went well except the mainboard sound driver won't install so there no audio. When I do a search for the drivers it acts like it's going to install them but the gives a "cyclic redundancy error." I tried installing the drivers downloaded from the MB manufacturer's site and they still don't install.

I then installed a separate new sound card and still get the same problem. My first thought is something's wrong with the mainboard. It's the first time I've had XP on it. Any ideas? Thanks.
 

A:Cyclic redundancy error w/audio driver

7 more replies
Answer Match 102.06%

when i extract a bunch of .rar files with winRAR and the open the .iso file, then burn the .iso file onto a DVD and try and open it on another computer, i get a "cyclic redundancy error".
would it be the burning or exctracting causing the error(i know the original file works fine).

what are maybe some more reliable programs for reading .iso files, burning files and extracting .rar files.
???
 

A:Solved: Poweriso and winRAR - cyclic redundancy error

9 more replies
Answer Match 102.06%

http://forums.techguy.org/hardware/937926-cyclic-redundancy-check-error-western.html

The above URL is a link to a thread where varioous recovery options for software were mentioned to copy files off of a 1TB western digital HDD which happens to be exactly my problem. the list of software is extensive and at the conclusion of the thread the two programs recomended to try 1st are Unstoppable download and terra copy. Neither of these programs can even initiate the hard drive to view a folder to copy and when I try a CRC error comes up within the browse function of the programs. Im basically wondering if the CRC problem is even addressed by these programs or the others listed. What i need is something to subvert the CRC check or any other way to clone, copy or back up any useable sectors on this HDD.
*I should also note that no damage what so ever has occurred physically to the drive and this CRC error began after a multi month period of disuse however it sat undisturbed on a shelf the entire time.
thanks very much for any possible help u can offer.
 

A:Solved: Re: Cyclic redundancy error on 1 TB HDD... Im aware this has been previously

12 more replies
Answer Match 102.06%

Hiya.
Ok, I was looking in the threads for Cyclic Redundancy Fatal Error Message and while doing so kept trying to solve the problem myself.
I was doing a clean install of XP home edition with service pack 2, all standard stuff.
I had partitioned the hard drive (80GB IDE) and formatted the first as FAT32 as i like to put 98SE on first, then whatever XP over top for various reasons.
My problem was that i formatted the D:\ partition to NTFS.
I reformatted both drives to FAT32 copied and then installed 98SE to/from C:\options\cabs and when the XP option of creating NTFS partitions became available DID NOT CHOOSE FORMAT TO NTFS. Now I can do it from administrative tools if i have/want to. Problem solved. Not HARDWARE/SOFTWARE related, file system related.
Hope this helps someone.

Don't eat yellow snow.
 

More replies
Answer Match 101.22%

Sorry, thought I should just open a new thread. Instead of adding on to others.
Hi
My system kept crashing so HP customer care told me to back up and do system recovery.
I back up my system into an external hard disk and was told to do system recovery on my lap top. Then restore the back up.
After I finished system recovery and tried to do a back up restore, I got this error "cyclic redundancy error" 0x80070017
I've 2 external hard disks and I tried both. Both had the same error message! HP now says "oh maybe you didn't back up properly" but I followed the instructions on the Windows control panel and it backed up for 3 days from 0-100%! And I checked the folder it had 256GB of files. So it must be completed.
What can I do? I'm sure the files I backed up are there. I can't use it now. Can it be saved? Pls help.

More replies
Answer Match 100.8%

i keep getting this error message (cyclic redundancy check ) when trying to install rainbowsix vegas 2, i have tried a new hard drive, a new dvd drive, and a clean install of vista ultimate 64 bit, anyone got any ideas ?, all drivers are upto date.
i cant copy the data 2 file direct from the dvd to c/drive either, this seems to be the root of the problem.



QX9650 @ 3.52GHz

4 gig ocz flex 2 ram

striker 2 mobo

2xBFG 8800 ultra sli mod

A:cyclic redundancy check

Try a new DVD - a CRC error means the data is corrupted on the DVD - meaning either it is scratched or it is truly corrupted.

6 more replies
Answer Match 100.8%

I don't know whether I am posting in the correct area, but forgive me if I'm not.

I have recently attempted to retrieve some files from zipped archives stored on CD's. After approximately 50% of the zip files on each disc have extracted, I am coming up against CDC errors. The discs involved were all produced at the same time, using the same software, etc.

I am wondering if the data in the remaining files is lost, or if someone knows of a way in which I can get around this error and retrieve at least some of the data.

Any help would be appreciated, even if it is just to tell me that the data is lost and the discs need to be dumped.
 

A:Cyclic Redundancy Check

The CRC error basically says that the file has some corruption and does not match the checksum that it should. The actual location and extent of the corruption cannot be determined.

The problem is that there is no redundant data in the zipped archive to allow the error to be corrected, as the zipping process removes such extra bulk to make the file smaller.

It sounds like a marginally readable media with that many files failing, you were probably lucky to get any back.

But as the readability is based on the "reflectivity" of the dye used in the CD, and the lasers between different drives also are not uniform, its entirely possible that the CD could be read OK on another computer or two and I would be trying that before giving up.
 

2 more replies
Answer Match 100.8%

First of all Hi there my first post here...
Okay the problem is the Cyclic redundancy check as known the Crc Error.
Everytime i try to install/Unrar a game over 1GB i get this error..
Is working fine with the programs thought
Here are some pictures they aren't mine but is like my errors.
http://media.photobucket.com/image/c...cError.jpg?o=2
http://media.photobucket.com/image/c...titled.jpg?o=3
[http://media.photobucket.com/image/c...Cerror.jpg?o=1
My Specs..
Operating System: Windows XP Professional Service Pack 3
Processor: AMD Athlon™ 64 Processor 3200+, MMX, 3DNow, ~2.0GHz
Memory: 1024MB RAM DDR1
Card name: Radeon X1650 Series
Display Memory: 512.0 MB
What i've already tried
I already installed several types of windows
Runned MemTest for like 3.30h and no erors found. Because i have 2x512 rams i tried to swap them and install the game but same result...
Tried HDTune Pro no bads found on my HDD
Now what remains are the Proccesor,Motherboard and maybe Modem?..
I hope someone can help me
Thx
LE:Forgot to mention i ain't trying to install from CD im installing from HDD

A:Cyclic redundancy check

First thought is a corrupted file.

If these files have been downloaded via a torrent or other P2P application/service then we cannot help further on this site.

15 more replies
Answer Match 100.8%

Whenever I put in this particular Data DVD I get the files up. Then on some of the files I try to copy to my hard drive I get a cyclic redundancy error message. Its not on all files just some in particular. I tried it on three dvd burners two of them did the same and the third thought it was a blank dvd. Is there anyway I can get the files from that dvd into my hard drive. They are very important. Give some names of software, ANYTHING!!! Thanks ahead of time.
 

More replies
Answer Match 100.8%

I am trying to move and outlook .pst file and I get an error that says there was a cyclic redundancy check and I cannot copy or move or do anything with the file. Anyone know what this is?
 

A:Cyclic Redundancy Check?

9 more replies
Answer Match 100.8%

what does this mean ?? I reformatted my computer, so I backed up all my music on a dvd (data disc), it burned ok, but when i try to transfer them back onto my computer, most files wont transfer, i get this message, but there are some that do transfer, ??
 

A:cyclic redundancy check

A CRC error means that the files on the CD are corrupt.
 

1 more replies
Answer Match 100.8%

on some cd's i get this message when installing that states data error cyclic check??? what's the deal
subnote-it's only burned cd's
 

A:cyclic redundancy check

6 more replies
Answer Match 100.8%

I need to jump on this band wagon. My apologies if this has already been covered but I am in need of HELP.​
I have a WD 2tb hard drive that fails to show up in MY COMPUTER but in Disk management it shows as DISK 1 Unknown - Not initialised. I have tried to initialise but comes up with the reply DATA ERROR - CYCLIC REDUNDANCY CHECK.

I have removed the hard drive from the WD casing and have now placed it in a docking station (to take away any fault with the WD casing). I have also tried a different number of cables and different USB ports on 3 diff computers all running off Vista.

When I plug the hard drive in and switch it on, it starts up as normal (if you place your hand on it you can feel it working but no loud sounds to say the hard drive is corrupt.)

I have tried chkdsk but I dont know what letter the drive is so I can't go any further as it justs checks the C drive. I am not completely savvy with computers but I know a little so ALL HELP IS APPRECIATED!!

I have got about 70-80 gb of photos and video footage of my family that I had stored on this hard drive which I haven't backed up - ok I know school boy error but I was in the middle of putting all my files together that I deleted the back up!!!!

THANKS IN ADVANCE
Bernie
 

A:Cyclic redundancy check

You are screwed, drive is toast. Sorry.

You can try the 'freezer trick' if you are really desperate. Put that drive in the freezer for long enough to get everything super cold. Then take it out and hook it up immediately, you might get lucky and have a few minutes where it will work. I have never had this work, but I have read about it working.... although that was probably 10 years ago.
 

1 more replies
Answer Match 100.8%

Hello everyone,I tried to burn some mp3'on a DVD disk as data files & about 11 of the cd's was blank...it said cyclic redundancy check...can someone tell me what this means or what I can do to correct it...
thanks bobbylee
Windows XP
2.8GHZ Intel/ 2-512MB Kingston
Intel 875pbz / GeForce FX 5900 Ultra/ SB Platinum\Plextor DVD 708a burner/ Plextor 52x32x52 CD-RW
120GB Western Digial and Floppy Drive/ Turbo-cool Deluxe 510 Watt / CoolMasterCase
 

A:What is cyclic redundancy check

7 more replies
Answer Match 100.8%

I had bought the game Crysis a few months ago, and played its campaign to the end. Recently, I wanted to play the game's multiplayer, but when I started the setup, it kept giving me an error "can't read from file sounds.pak", and so I tried copying all files of the CD to the hard drive, and sure enough, one file gave an error 'Error copying file Sounds~1.cab. Cyclic Redundancy Check.' Since I don't want to buy the game again, and the warranty has long since expired, is there anything I can do? All other files from the CD-ROM were copied without a problem.
 

A:Cyclic Redundancy Check

give the CD a good clean
http://www.howtocleanstuff.net/how-to-clean-cd?s-and-dvd?s/

have a really good look at the CD - I have found a good clean often resolves these type of issues
 

2 more replies
Answer Match 100.8%

i changed computers and when i copied my files in my documents and went to reinstall them on the new pc i get the cyclic redundancy check message, are my files lost or is there a way to recover them off the disk?
 

A:cyclic redundancy check

7 more replies
Answer Match 100.8%

I'm trying to back up some stuff to an external hard drive. And there are errors in movies that I have ripped (because I either forget to put them back in the case or they get lost) some movies and whenever I try to move the video file (ripped int a AUDI0_TS file and a VIDEO_TS file) I have an error box where the title of the window in the blue bar says "Error Copying File or Folder" and in the window (the gray part) it says "Cannot copy VTS_01_2" Data error (cyclic redundancy check).". And then I click the "OK" button and it stops the transfer. The VTS_01_2 is sometimes replaced with whatever file that cannot be transferred or that is causing the problem. I used DVDShrink and DVD43 to back them up. I am running Windows XP sp3 and transferring them onto a 300 GB hard drive. Can anyone help me please? Thank you.
 

A:Cyclic Redundancy Check

What was the source of the movies?
 

1 more replies
Answer Match 100.8%

I am getting this error and I know what it is and why it is doing it for the most part though the disk I am trying to copy isn't that badly scratched.
Now I remember a few years ago a friend told me a way to get it so the drive or dvdshrink wouldn't do this anymore but for the life of me I have forgotten.

Any help is always appreciated.
 

A:Cyclic Redundancy Check (CRC)

Some burners read scratched discs better than others. One trick that has worked for me is to use window/glass cleaner and a green scouring pad. Wipe the scratched disc in a radial motion using the pad, all the way around the disc. Wash off the cleaner and dry the disc. Try reading it once more
 

2 more replies
Answer Match 100.8%

As a RW-CD starts to fill up I get an error message of Cyclic Redundancy Check. What I an doing is adding data to the CD on a daily basis but the CD is nowhere near full. This is information that I really need. This happens quite often. I'm using MAXELL CDs. Are there better ones? Are is it my CD burner? Thanks for any help you can give!
 

A:Cyclic Redundancy Check

6 more replies
Answer Match 100.8%

Hi,

I transfered a file from my friends computer to my laptop, and now, I'm trying to transfer it onto my server. There was a series of 6 files that he transfered to me, but the problem is only 5 of the .rar files get transfered onto my network! When it gets to the last file, says, "ERROR: Cyclic Redundancy Check" and it stops. Is there a way to overcome this or will I have to go back to his house and redo this whole process???

By the way, I WOULD get him to burn it onto a DVD but he doesn't have, nor does he want to get a bloody DVD Burner! And the files are like 10 megs too big for a CD so I had to go to his house with my laptop and a straight through ethernet cable and transfer it directly!

Thanks.
 

A:Cyclic Redundancy Check

6 more replies
Answer Match 100.8%

Not sure if this is the correct forum or not, but maybe someone can give me an answer. I have 3 extra drives, 1 internal 250G slave, and 2 external 500G each. I get a lot of movies and TV shows for viewing on my big TV. I've downloaded these movies to my 250G slave drive, and it has worked well for 15 months now. But recently I began to get the "Cyclic Redundancy Check", Can't copy this file. Some of my files will copy, but slower than normal. But I'm puzzled about the ones that won't copy.
If someone has a suggestion about a fix, I'd greatly appreciate it.

Mic
 

A:Cyclic Redundancy Check

You could try and run a hard drive test software on the faulty drive. CRC errors refer to either a physical issue with the drive, or highly corrupted files. Sounds more hardware related.

Test out the drive with the appropriate software. What brand drive is it?
 

3 more replies
Answer Match 100.8%

I am trying to retrieve a file on my floppy disk. When I click on the file, I receive a Data Error: Cyclic Redundancy Check. The information on this disk is of the utmost importance. Can this be retrieved or is it lost forever?
 

A:Cyclic Redundancy Check for A:

7 more replies
Answer Match 100.8%

I'm trying to back up some stuff to an external hard drive. And there are errors in movies that I have ripped (because I either forget to put them back in the case or they get lost) some movies and whenever I try to move the video file (ripped int a AUDI0_TS file and a VIDEO_TS file) I have an error box where the title of the window in the blue bar says "Error Copying File or Folder" and in the window (the gray part) it says "Cannot copy VTS_01_2" Data error (cyclic redundancy check).". And then I click the "OK" button and it stops the transfer. The VTS_01_2 is sometimes replaced with whatever file that cannot be transferred or that is causing the problem. I used DVDShrink and DVD43 to back them up. I am running Windows XP sp3 and transferring them onto a 300 GB hard drive. Can anyone help me please? Thank you.
 

A:Cyclic Redundancy Check

CRC errors mean the data actually seen is not faithfully transferred.

1- the file is actually corrupted
2- the media has errors
3- the software reading/writing the CDROM is overrunning (ie going too fast; slow it down).
 

2 more replies
Answer Match 100.38%

I recently downloaded a video and had stored it in a local disk. When I try to copy this file into a USB or any location my windows copier just hangs and says after a while "The source file cannot be read" - Cyclic Data Redundancy. I figured out that part of the file is stored in bad sector. How do I recover the file.

When I play the video, at particular time it hangs. I close it and after the my hard disk stops continuously blinking the LED I open it again and and seek more than the time it stopped.
For eg: It hanged at 22:23 mins then I would open it again and seek to 22:29 then it would play.

I could not make a copy of this file to any location.

Please help

Thanks in advance.

A:Cyclic Data Redundancy

Check disk might recover it.

3 more replies