Tech Problem Aggregator

System diagnostic report

Q: System diagnostic report

I have run a w7 home premium system diagnostic report which contains a couple of errors and warnings. I dont really understand what the errors mean or what to do about them.

Having looked at my event viewer I see many errors and warnings listed, again I dont know what these mean or if I need to do anything.

Is there anybody out there prepared to take a look at these for me and tell me if i need to do anything. If so please tell me how to save and post the info and I will gladly do so.

Thanx

A: System diagnostic report

What specific errors are you seen in the diagnostic report?

Regarding Event Viewer:

If I spent 10 minutes investigating each different error found in Event Viewer, I would never have time to eat or sleep. If you can't or won't ignore most of them, you are destined to have a full time job, working for EV.

I look at it maybe once a year and would never look there if my system was running well.

1 more replies
Answer Match 76.02%

I ran the System Diagnostics Report that is generated in Computer Management under Performance--Data Collector Sets--System?System Diagnostics. Here is a screenshot summary of the results (the full System Diagnostic Report is 123 pages long).

My system appears to be running fairly smoothly so I was surprised by these results. No other programs were running during the test. The UEFI diagnostic shows no hardware problems and I doubt that all of the poor results are valid.

Someone at Microsoft said that incompatibility issue(s) might cause these results. However, they would give me no further insights and said I would have to pay to have them figure it out. In another forum, I was told that the results are just Windows internal reporting and to ignore them. However, this makes no sense.

There are two Abnormally Stopped System Services: Interactive Services Detection (UIODetect) and Windows Encryption Provider Host Service (WEPHOSTSVC). What should be the settings for these services?

Question: How can I determine what, if anything, is conflicting with the diagnostic test?

Question: Could the problem be a flaw in the diagnostics test itself, rather than any problems with my system?

Question: If there really are some issues, how can they be resolved?

I hope that someone can help me understand what to do with these results. I would be happy to share the full diagnostics report as well as the associated system performance report.

System Information
... Read more

More replies
Answer Match 76.02%

Hi

When i run a system diagnostic scan the health report does not recognise
the anti-virus i have installed, but windows security centre does and is all ok.
Can anybody help please.

More replies
Answer Match 74.34%

my hp advanced system diagnostic battery test report this msgFAILURE ID:0LPXKW-5QW860-QFPH5A-C0BW03PRODUCT ID: XX049AV#ABD











Solved!
View Solution.

A:my hp advanced system diagnostic battery test report this ms...

I think you can assume it was not sold with a new battery so needs one now. 

7 more replies
Answer Match 71.4%

After running the System Health Report from here;

System Health Report

......at the System Diagnostic Report, I get a warning advising that the scan failed to detect running anti-virus, anti-spyware etc. protection, here -

......and yet at Start>Control Panel>Security Centre, all protection requirements are shown as up and running, here -

......is there any way that I can get the scan to recognise the Security protection setup, and so include it in the System Diagnostic Report?

I've had no problems with viruses, malware or spyware. This is purely an administrative issue to try and get the System Diagnostic Report to give a true account of the system.

A:System Health [Diagnostic] Report doesn't recognise avast! anti-virus, as installed.

Same here. If it doesn't recognise Norton 360 I think its a glitch. If security centre is satisfied then all is fine, otherwise it would be complaining.

7 more replies
Answer Match 61.74%

Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-WJ2H8-R6B6D-7QJB7
Windows Product Key Hash: ckKNc+BBPDWmo1LUlOkraNjlQ34=
Windows Product ID: 00359-OEM-8992687-00006
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {8081D355-F49A-44C6-94BE-240F8969A7A4}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.150525-0603
TTS Error: T:20141212195033087-
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 102
Microsoft Office Home and Student 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-... Read more

A:Diagnostic Report

2 more replies
Answer Match 61.74%

Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled
PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility with the hardware in this computer. Any ideas why I would get this error? The graphics card is a HIS RADEON HD 4850 PCI EXPRESS i Cooler IV
512mb gddr3-1080p FULL HD-HDMI. any help would sure be appreciated! Thanks

A:60 second diagnostic report ?

There are some power management issues with both the i5 7xx series and the i7 8xx series.
This has been known for quite some time.

3 more replies
Answer Match 60.48%

Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-JKHXW-D9W83-FJQKD
Windows Product Key Hash: AYaBykmfTHUVW5whGaYMeVJn0/U=
Windows Product ID: 00359-OEM-8992687-00249
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7600.2.00010300.0.0.003
ID: {265B45BF-65A4-4628-9A76-5A1318E112BB}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7600.win7_gdr.100618-1621
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

B... Read more

A:Activation problem with win 7 HP MGA Diagnostic report

The Product key ia worn on the bottom of the laptop so I had to pull it from the registry using Magic jelly bean key finder

2 more replies
Answer Match 60.48%

Hello : Here is my basic info :
dell 420 xps desk top
windows vista home premium 32 bit

norton security suite from comcast

diagnostic report reads as following:
Inoperable Hardware Devices
Problem : Norton Security Suite has detected inoperable hardware devices.
Recommendation : You may want to configure these hardware devices. Run Device Manager to properly configure hardware devices.
This section lists any hardware devices that are not working.
Data TypeDevice Problem and DescriptionDevice TypeEthernet Controller Device StatusDevice drivers are not installed. (Code 28) Plug and Play IDPCI\VEN_8086&DEV_294C&SUBSYS_02151028&REV_02\3&172E68DD&0&C8 Device TypeSM Bus Controller Device StatusDevice drivers are not installed. (Code 28) Plug and Play IDPCI\VEN_8086&DEV_2930&SUBSYS_02151028&REV_02\3&172E68DD&0&FB Device TypeADS Instant HDTV PCI Device StatusDevice cannot start. (Code 10) Plug and Play IDROOT\MEDIA\0000 Device TypeADS Instant HDTV PCI Device StatusDevice cannot start. (Code 10) Plug and Play IDROOT\MEDIA\0001 Device TypeAMD-8151 HyperTransport(tm) AGP3.0 Graphics Tunnel Device StatusDevice is not working properly. Windows cannot load the required device drivers. (Code 31) Plug and Play IDROOT\SYSTEM\0001

What could have caused this and how can I fix this? Any help would be much appreciated.
 

A:norton security diagnostic report help

Go to Control Panel - Device Manager.

Are there ANY entries in the Device Manager that have a yellow ? or yellow ! or red X next to them?

------------------------------------------------------------

Are there ANY devices in that Dell XPS 420 desktop that aren't working?

------------------------------------------------------------
 

1 more replies
Answer Match 60.48%

Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-X9MHT-4QPHH-9PXM7
Windows Product Key Hash: UrJrhaTfiEO4fFleWIf5z28SiBQ=
Windows Product ID: 00359-OEM-9828422-78149
Windows Product ID Type: 8
Windows License Type: COA SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {0884D90B-2219-4273-9371-F135677E13FB}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_ldr.160408-2045
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Brow... Read more

More replies
Answer Match 58.8%

Hey Guys i just bought a new Lenovo thinkpad Laptop with Windows 8 Installed Pro on it and i felt it was hard to use windows 8, i like windows 8.1 so i downloaded 8.1 from store and now it is installed it keeps asking me to activate windows when i Go to PC settings/Activate windows i come up with an activation error
Error code: 0x8007232B
Description :- DNS name does not exist

I bought it from a shopping mall when i visted other city.


Code:
Diagnostic Report
-----------------------------------------
Windows Validation Data-->
ToolVersion: 6.3.9600.16384
LicensingStatus: In Notification
LicensingStatusReason: 0xC004F056
LocalGenuineState: Invalid license
LocalGenuineResultP: 0
LastOnlineGenuineResult:
GraceTimeMinutes: 0
TotalGraceDays: 0
ValidityExpiration:
ActivePartialProductKey: 9D6T9
ActiveProductKeyPid2: 00261-50000-00000-AA468
OSVersion: 6.3.9600.2.00010100.0.0.048
ProductName: Windows 8.1 Pro
ProcessorArchitecture: x64
EditionId: Professional
BuildLab: 9600.winblue_gdr.130913-2141
TimeZone: Pakistan Standard Time(GMT+05:00)
ActiveSkuId: c06b6981-d7fd-4a35-b7b4-054742b7af67
ActiveSkuDescription: Windows(R) Operating System, VOLUME_KMSCLIENT channel
ProductUniquenessGroups: 55c92734-d682-4d71-983e-d6ec3f16059f
ActiveProductKeyPKeyId: ace182fe-75fe-ee4b-31e7-9fb20a237002
ActiveProductKeyPidEx: 06401-02615-000-000000-03-1033-9600.0000-3642014
ActiveProductKeyChannel: Volume:GVLK
ActiveVolumeCustomerPid:
OfflineInstallationId: 159730... Read more

A:My windows Activation error ( Diagnostic Report Included )

Unfortunately, it seems you were duped. That PC came with a DOS licence (?FreedOS)

Laptops and netbooks :: ThinkPad Edge laptops :: ThinkPad Edge E540 :: 20C6 :: 00CPUE - Lenovo Support (US)

The seller installed Windows illegally with a KMS volume licence.

You will need to get hold of the seller to reclaim your money or pruchase a genuine licence.

2 more replies
Answer Match 58.8%

Hello
,
i play online games like counter strike , dirty bomb ...
it doesn't feel smooth , laggy , and from minute to other freezes for 1-2 seconds
my line quality is good , hardware also ,
updated all drivers .
i tried leatrix latency fix , combofix , disabling antivirus , defraggler ,
os : win 7 sp1
i have also lookinmypc full report , if someone willing to help i will send it in private
Specs :
Msi gaming laptop
Intel i5
Ram 8 gb
ati hd 5870 2gb

Razer cortex diagnostic report :
Code:
Razer Cortex Diagnostics Report v2.0 Version? 7.1.14.12241
Date? 2016/04/09 18:03:34

----------------------------------
01 - Operating System
----------------------------------

0101 - Operating System : Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.160211-0600)
0102 - Language : English
0103 - BIOS : Default System BIOS
0104 - Processor : Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz (4 CPUs), ~2.5GHz
0105 - Memory : 8174MB RAM
0106 - Available OS Memory : 8174MB RAM
0107 - Page File : 3319MB used, 13026MB available
0108 - Windows Dir : C:\Windows
0109 - DirectX Version : DirectX 11
0110 - DX Setup Parameters : Not found
0111 - User DPI Setting : Using System DPI
0112 - System DPI Setting : 96 DPI (100 percent)
0113 - DWM DPI Scaling : Disabled
0114 - DxDiag Version : 6.01.7601.17514

----------------------------------
02 - Processor
----------------------------------

0201 - Caption : Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz x4 ~2534M... Read more

More replies
Answer Match 58.8%

Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0x8004FE22
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-YG69F-9M66D-PMJBM
Windows Product Key Hash: /kehptF9HHVxM5d8dUnqgcfndXw=
Windows Product ID: 00426-OEM-8992662-00497
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7600.2.00010100.0.0.001
ID: {0CAB3D47-E49C-4459-8ACC-8D068C254D59}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7600.win7_gdr.100226-1909
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237... Read more

A:microsoft genuine advantage diagnostic tool report

The installation is counterfeit. Where did you get it from?

5 more replies
Answer Match 57.96%

Hello Sevens Forum I have a BSOD in my windows 7 ultimate here post my SF Report. I dont know what could be the problem. Can you Help me? Thz!!!

A:Report .rar witch SF Diagnostic Tool file BSOD Windows 7 Ultimate x86

Please follow -






  
Quote: Originally Posted by writhziden


There seems to be a problem with your Windows installation. Please follow the Windows Genuine and Activation Issue Posting Instructions. Post the results in your next post; do not start a new thread.

5 more replies
Answer Match 54.6%

I just wanted to know if MS removed the system health report feature from performance monitor.
If so how do you start a system health report in Windows 10, it seems to differ from Windows 7
where you can find in advanced tools "Generate a system health report" ? Thanks!

More replies
Answer Match 49.56%

I am looking for a "1 stop shop" program that will do a detailed scan of my entire system and locate any problems or opportunities and suggest how to correct them or what may be the cause of the error or slowdown. Freeware would be great, but I don't mind paying for it if it is worth the money.
Any suggestions?

Thanks
 

A:System diagnostic

take a look at this site ,pc pitstop. maybe it will do all you want.
http://pcpitstop.com/
 

2 more replies
Answer Match 49.56%

Hello,
 
 first thing I hope I'am in the right area to post my problem, I have a problem with the system diagnostics report on my pc.  I have done all I know to do.  I ran a system report and health report and the error message says the security center has not recorded an anti-virus product.
 
Verify that an anti-virus product is installed and functioning, configure security center and anti virus status.
 
I have checked the anti virus on my pc and says is up to date and says in the security section that all is on and connected.
 
I don't know what else to do. I have tried to find a solution in windows website.
 
Thanks for reading
 
Gina :smash: 

A:system diagnostic

What OS are you running? (XP, ,Vista, 7...etc.)
What AV are you using? (Norton, McAfee, Avast...MSE, etc)
Is this something that has only recently started? If so, what is new or different on your system?
Have you scanned for malware or noticed any malware like activity on your system?

4 more replies
Answer Match 49.14%

Hi,

decided to run a system diagnostic on my Dell PC today - just because it had never been done on this particular PC. Received a msg telling me Microsoft .Net Framework 4 Full would be required in order to install the Dell Diag. We have the lesser version .Net Framework 4 Client Profile. Was about to install the full version over top of Client Profile when it occurred to me that perhaps there was a better System Diagnostic tool out there anyway.

In fact it looks like there are quite a few. So I am here for recommendations. Would prefer not to pay for one if possible but certainly don't want to be cheap since this is our primary PC. Or should I install the Full Version of .Net Framework 4 & stick with the Dell diag?

Perhaps a little more info:

I ran something called Free PC Health Scan on the Dell website which then called into play iolo System Mechanic & it found a number of issues. Two items removed from startup which I already knew about & was going to remove myself when was certain there would be no negative repercussion. But what concerns me:

1) are the over 100 registry entries it flagged - I do run CCleaner several times throughout the week to remove old/left over/invalid registry entries. But apparently iolo found around 104 that need to be removed? & yes I know we're not supposed to muck about with registry but have been letting Norton, McAfee & CCleaner do their thing for a number of years now & to my knowledge have not damaged... Read more

A:Dell System Diagnostic, or something else?

Dell used to have hardware diagnostics on the hard drive, accessed by F12 at power on? Have they stopped that?

However, all the "repair" programs such as System Mechanic and the one advertised on TV, etc that fix and speed up your PC and remove hundreds of registry entries are very suspect. Most techies compare them to "snake oil".

Ccleaner has a registry scanner program, if you really want to do that. Its the least intrusive.

9 more replies
Answer Match 49.14%

Hey, does anyone know of any free system diagnostic tools that would help me find out if something on my computer isn't cooperating with another?
 

A:System Diagnostic Tool

8 more replies
Answer Match 49.14%

Is there a way to gauge a PC system's gaming ability?

Since video cards and add-on programs (Direct X, etc) are so fundamental to game play, if would be nice to have a utility that would give a yes or no on the question "Will this game work on my computer?"

Bottom line is I don't know if my PC is 3D, GL rendering or what anymore since video card evolution is non-stop. A utility program to scan the computer's capability would help.

3 year old PC:
Pentium 3 533mz Katmai
383 mb RDRAM
32mb Nvidia geForce 4X AGP Graphics Card
 

A:System Diagnostic Utility

That's actually built into Directx.

Go to Start, Run type in dxdiag and hit enter.

If that doesn't work, then do a search on your system for dxdiag and open it when you find it.
 

2 more replies
Answer Match 48.3%

hey, a friend reccomended me this website after he tried to help me get rid of this problem himself, but everything he tried hasn't gotten rid of the issues.

last night i was on my machine (windows xp) and it threw a few warning boxes up, then it shut down. i turned it back on and all the icons on my desktop were gone, and one of those fake virus scanners started running, calling itself system diagnostic. it's also hidden everything in my program files (except if i download something new)

so i've tried all the usual fixes (according to friend) which was running rkill, then malware bytes and super anti spyware. both find errors and apparently remove them, but on system restart the problem still occurs. also when these programs say the virus is gone, the desktop icons and program files are still gone. something which i read will return after this virus is deleted.

help?

A:Infected with "system diagnostic" malware?

I'm having the exact same problem, here's my thread: http://www.bleepingcomputer.com/forums/topic384229.html

If you look at the C Drive you can see that the data is still there because of the size of it but you can't access it.

18 more replies
Answer Match 48.3%

Need to download System diagnostic and benchmarking tools like sandra
Installed many times Sandra but its not opening after install, plz help
 

A:System diagnostic and benchmarking tools

plz someone reply
 

2 more replies
Answer Match 47.88%

Problem: Partition (C:) reports file system errors.

Recommendation: By default, Windows will correct the disk errors upon restarting the computer. You may wish to close running applications and restart the computer.

This section provides key operating system details including version, timing of last update, and more.

Feature Details
Operating System Microsoft Windows XP Home Edition
Patch Level Service Pack 3
Date Installed 10/20/2010
Country Code 1
OS System Language 1033
ANSI Code Page 1252
System Locale 0409
Internet Explorer Version 8.0.6001.18702
Windows Update Automatic
Path C:\WINDOWS\system32;
C:\WINDOWS;
C:\WINDOWS\System32\Wbem
OS User Language 1033
Latest Windows Hotfix Date 10/20/2010



it says that the error fixes itself when i restart my comp which i did a few times. i am puzzled at why this is showing up and worried it might fry my computer. my desktop gave me a black screen saying drive failure was imminent and my laptop is all i have left, and can not afford another one. so please tell me how i can solve this problem if i can. thank you!

A:norton 360 operating system diagnostic puzzle

Norton 360 is anti-virus/security software and your question has nothing to do with that, so why is that in the title? Am I missing something?

Hard Drive Failure is imminent message is usually from SMART and frequently it is correct meaning that the hardware of the hard drive is failing (not the software). That might also explain chronic hard drive errors that are "fixed" and then reoccur at reboot.

If the desktop only boots to black screen then how did you get the text of the error message (above)?

What happens when you turn the desktop on?

Is the laptop also broke? If so, start a separate thread for that, otherwise things will get VERY confusing.

4 more replies
Answer Match 47.88%

Hi,

I have a Toshiba a200 Satellite laptop running Windows 7 Ultimate 32 bit (which I recently installed as a fresh install to try and solve my problems). I have several problems, and I'm not sure if they are related or seperate to each other. Here they are:

Often, when I am away from the computer, even if it's only for a few minutes, when I come back it is frozen -- the screen looks normal, but the mouse won't move and the system won't respond to Ctrl + Alt + Delete. I have to hold down the power button until it goes black, and then reboot.
Often when I reboot, and almost always when I boot up for the first time of a morning, the computer fails to start -- it will get to a black screen and freeze forever, or it will freeze on the "Windows is Starting Up" screen, and I will have to hold down the power button again to shut it off. It will usually start after the second or third time.
Sometimes, firefox (and sometimes other programs too) stops responding for about 30 seconds, and then comes back fine. It's not that bad, but it seems a bit odd. This is just a minor annoyance -- the other two problems are more worrying.
I've attached a zipped folder containing the reports from the SF Diagnostic Tool.

I hope someone can help me. I'd be really grateful.

Thanks,

Matt


EDIT:
Not sure if this will help, but the system has frozen twice in the past few hours, and this error occured both times in the event viewer:

Session "Microsoft-Windows-Setup" stopp... Read more

A:System Freeze - SF Diagnostic Files attached

**** this I'm getting a Mac

1 more replies
Answer Match 47.88%

Does someone know where I could download a System Diagnostic Utility For Windows XP Pro?

I'm haveing some problems with my pc, and I thought if that would help.
 

A:Solved: System Diagnostic Utility For Windows XP Pro

16 more replies
Answer Match 47.88%

I was watching a movie on my laptop one minute and when I transfered a new dvd in. I get a blue screen that says "Critical system failure". Then the computer dies. When I started it back up, it says "Hard Disk Error" and when I run a diagnostic it tells me "No hard drive found". This laptop has been very well taken care off. Never dropped. Never had a problem. Kept out if reach for childeren. What is going on?This is the 2015 Dre with 1tb memory and 8g ram.

More replies
Answer Match 47.88%

Hi all ..

I just built my own pc 2 weeks ago.Everything is new :

OS Windows 7 Ultimate 32
CPU AMD x6 1090t
Motherboard ASUS M4A89GTD PRO
Memory BALASTIX 4 GB ddr3 1333mhz
Graphics Card onboard HD 4290
Sound Card onboard
Monitor(s) Displays DEll
PSU 650W
Hard Drives seagate 500gb

I have to say that i only encountered BSOD only when I run the ASUS diagnostic tool which initially whenever I run it i got this error (included two here)


signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 1000007f
BCP1: 00000008
BCP2: 8E7A5750
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\103110-18860-01.dmp
C:\Users\scorp\AppData\Local\Temp\WER-36161-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 1000007f
BCP1: 00000008
BCP2: 8E76F750
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that he... Read more

A:BSOD New system +ASus Diagnostic tool

  
Quote: Originally Posted by scorpion100


Hi all ..

I just built my own pc 2 weeks ago.Everything is new :

AMD x6 1090t ,Asus motherboard,memory balistix 4gb ddr3 ,650 PSU ,and seagate hard disk...

I have to say that i only encountered BSOD only when I run the ASUS diagnostic tool which initially whenever I run it i got this errorincluded two here)

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 1000007f
BCP1: 00000008
BCP2: 8E7A5750
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\103110-18860-01.dmp
C:\Users\scorp\AppData\Local\Temp\WER-36161-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 1000007f
BCP1: 00000008
BCP2: 8E76F750
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\103110-32463-01.dmp
C:\Users... Read more

4 more replies
Answer Match 47.88%

Hello to whomever responds to this thread. This is the first time I've used one of these help forums and my knowledge of computer lingo is limited, but I'd be greatful if you could help me with this problem.

A little while ago I downloaded an application which turned out to be a 'trojan', or so I believe. Upon opening it I received an error report, and my antivirus program (Symantec) informed me that several items with .trojan in their name had been detected and deleted. I was also advised to reboot my computer, and after doing so I became aware of a little red shield icon in my system tray. Clicking it brings up a question which reads:

"Would you like to update your security software and download System Live Protect?"

I have not clicked yes because I believe this may be a problem. Furthermore, whenever I open Internet Explorer, there is an error report: "Internet Explorer has encountered a problem and needs to close."

I am unsure as to whether these two problems are related, but that is my suspicion. Is there anything that can be done?

Thanks for reading

A:System Live Protect Icon In System Tray And Internet Explorer Error Report

I just looked around on the web and there are a lot of folks with this problem but no answer. Use the programs below and let's see what they find. It is definitely something you don't want.Install Super Antispyware. Run it in safe mode. Allow it to quarantine whatever it finds. http://www.superantispyware.com/Run the online scan for Bit Defender in normal mode. Allow it to quarantine whatever it finds.http://www.bitdefender.com/scan8/ie.html--------------------------------------------------------------------------------Post a Hijack This log in the Hijack This Forum by following the directions in the link below if the programs above have not removed ALL malware. DO NOT post the log in this forum.http://www.bleepingcomputer.com/forums/t/34773/preparation-guide-for-use-before-using-malware-removal-tools-and-requesting-help/ --------------------------------------------------------------------------------How To start Windows in Safe Modehttp://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

5 more replies
Answer Match 47.46%

Hello, 
Please Help me out for above issue facing frequently. 

More replies
Answer Match 47.46%

Hello all. I'm currently talking to you from Safe Mode in Windows 7 32 bit.

I've been running Windows 7 for quite some time now and I haven't run across any hiccups like with the previous versions of Windows... until now.
I recently bought a copy of Star Craft 2 from Gamestop. Doing this allows you to be in the beta program... so I figured "Oh, good stuff".

I tried to patch the program and I received an error during the patch process. To make a long story short, Blizzard informed me that I should run the Windows 7 memory diagnostic tool to make sure that my RAM wasn't at fault, using the extended test. I figured "Ok, no problem".

I ran the tool, selected "Save work and restart the system".

The tool loads up and starts to run with 1 pass with a "basic" check. I realized after about 10 minutes into the check that I could hit F10 and change the options. I hit F10, changed the test to Extended and hit continue. The screen refreshed VERY slowly with the updated changes, except the progress went from 10% complete to look like "_%" for every spot that could have a % at it.

I thought that was odd, so I hit the Exit button.

The system rebooted.

The system started to hang at the BIOS POST screen a little longer that it usually does... normally it only stays there about 2-3 seconds... it now stays there for around 10-15 seconds.

The Windows 7 logo starts to load and then freezes half way through loading graphic. The system han... Read more

A:Windows 7 Memory Diagnostic Tool Crashed My System

I don't know much but if it was that bad I know I would just make a fresh install of Windows, erasing the partition, making a new and cleaning it.

9 more replies
Answer Match 46.62%

I started experiencing issues on my computer today.  The first thing I noticed was that my power system tray icon was missing.  I looked to make sure that it was set to display and despite checking that was set to display, the icon was missing.  At this time, I was at a hotel and wasn't attempting to connect to the internet.  
 
When I got home this evening, my computer would not load a web page despite the fact that my connection icon stated that I was connected to my home wireless connection.  I troubleshot the problem and it states that "The Diagnostics Policy Service is not running." I performed a google search of how to start the policy service and it appears to be enabled.  At this point, I ran a system restore.  The system restore brought back my power system icon, but did not resolve the connectivity issue.  
 
Please help.  Also, just to save time - if I need to restart my computer in safe mode will you please explain how.  I attempted to do it and couldn't figure out how to get it to work in Windows 8.  I'd heard it was difficult and confirmed it tonight.  Thank you in advance for any advice.  

A:Windows 8 - Diagnostic Policy Service won't run, system tray icons disappearing

How to start Windows 8 in Safe Mode
 
 
For the connection try these...

Please click Start > Run, type inetcpl.cpl in the runbox and press enter.
Click the Connections tab and click the LAN settings option.
Verify if "Use a proxy..." is checked, if so, UNcheck it and click OK/OK to exit.
Now check if the internet is working again.

OR

Go to Start ... Run and type in cmd
A dos Window will appear.
Type in the dos window: netsh winsock reset
Click on the enter key.

Reboot your system to complete the process.
 
 
 
Scan the system.
 
Please download MiniToolBox, save it to your desktop and run it.
Checkmark the following checkboxes:
Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory size.
Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run.
Note: When using "Reset FF Proxy Settings" option Firefox should be closed.
 
Download TDSSKiller and save it to your desktop.
Extract (unzip) its contents to your desktop.Open the TDSSKiller folder and doubleclick on TDSSKiller.exe to run the application, then on Start Scan.If an infected file is detected, the default action will be Cure, click on Continue.If a suspicious file is detected, the default action will be Skip, click on Continue.It... Read more

1 more replies
Answer Match 45.78%

Either there is no anti-virus product installed or it is not recognised. This is on windows 7. A new pc only a few weeks old installed Norton 2010 internet security which is working ok. So I believe I am covered how do I configure security centre to recognise this?
 

A:diagnostic results say the security system is unable to identify an active anti virus

16 more replies
Answer Match 44.52%

I'm looking for a good app that will give me information about my system. Type of bios, named bios, date, total configuration, etc. Thanks I have one called "systeminfo.exe", but it isn't working for windows 10 for some reason.
 

A:System Report

system info is still on 10 please see screenshot


so you right click Microsoft flag
click run
type
msinfo32
that opens system info and all you want is there on the various expanded items on left pane
 

2 more replies
Answer Match 44.52%

Hello all,

Does anyone know of a way of printing a report in windows that will display what type of hardware is in the machine, how much ram, OS name, IP address and so forth.

I thought there was a way to do it in NT.
 

A:system report

6 more replies
Answer Match 43.68%

Hello,
I am getting a notification in the above marked as critical which runs along the lines of: "A service is reported as having an unexpected error code... one or more services has failed... a service did not stop gracefully. Service exited with a code not equal to 0 to 1077. Resolution .. restart the service "
I believe this is a problem related to HP laptops and is not serious but I should like to know if there are any implications with it. It states to restart the service. But, which one ? I am very confused

A:System Health Report

Go to search
type
event viewer
Look for errors about the time of the problem.
With the codes, we can determine exactly what happened

12 more replies
Answer Match 43.68%

While trying to run the System Heath Report I get the error message "An error occured while attempting to generate system health report Unable to data collector set because there are too many folders. I have read some where it is posible to change the settings for the report but can't find out how to do it.

A:System Health Report

Originally Posted by Dullyjock


While trying to run the System Heath Report I get the error message "An error occured while attempting to generate system health report Unable to data collector set because there are too many folders. I have read some where it is posible to change the settings for the report but can't find out how to do it.



Dullyjock, here's the turorial System Health Report It looks like the two main things are running it under an Admin account and having it service set to manual. There is also a link in this tutorial for help with services.

Hope it helps.

1 more replies
Answer Match 43.68%

In November I cleanly installed Win7 Ultimate on my machine and all has been great but for the fact that I am not able to generate a system health report anymore. I get the attached error. I cannot understand this as all the other monitoring aspects work fine: I can monitor power usage, defrag, etc but I can't generate the system health report. Is it possible that a registry cleaning recently messed up a driver?

I apologize that I can't provide anymore details- I did do a system restore yesterday thinking that maybe a Windows Update perhaps interfered with this but it didn't make any difference. I wonder if anyone has a thought or suggestion for me that might help. Thank you so very much.

A:System Health Report

Hello Lizzybee,

Welcome to Seven Forums.

If you don't have any older restore points to try, then I would try this. SFC /SCANNOW Command - System File Checker

If that doesn't work, then you might try this. Repair Install

Although I'm not positive that the reg cleaner caused this problem, I recommend against the use of registry cleaners as they often cause more trouble than good unless you know exactly what is being deleted.

Hope this helps.

Gary

7 more replies
Answer Match 43.68%

System Health Report - Generate and View in Windows 8.1

Give perfmon /report in File Explorers address bar, in Run Dialog or Command Prompt to receive a System Health Report like in Windows 7:

A:System Health Report

Under Informational everything was rated poor!
I have a DIY PC with very fast bits and pieces so I know this isn't the case!

So... take what it gives you with a pinch of salt.

7 more replies
Answer Match 43.68%

ComboFix 11-12-21.02 - Admin 12/21/2011 15:16:49.9.1 - x86 NETWORK
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.510.269 [GMT -7:00]
Running from: c:\documents and settings\Admin\Desktop\ComboFix.exe
.
.
((((((((((((((((((((((((((((((((((((((( Other Deletions )))))))))))))))))))))))))))))))))))))))))))))))))
.
.
c:\documents and settings\All Users\Application Data\~c0Z19ciF3RYtxk
c:\documents and settings\All Users\Application Data\~c0Z19ciF3RYtxkr
c:\documents and settings\All Users\Application Data\c0Z19ciF3RYtxk
c:\documents and settings\All Users\Application Data\c0Z19ciF3RYtxk.exe
c:\documents and settings\All Users\Application Data\hFITnUFOxHN.exe
c:\documents and settings\Sam\Start Menu\Programs\System Fix
c:\documents and settings\Sam\Start Menu\Programs\System Fix\System Fix.lnk
c:\documents and settings\Sam\Start Menu\Programs\System Fix\Uninstall System Fix.lnk
c:\windows\system32\oobe\isperror
c:\windows\system32\oobe\isperror\ispcnerr.htm
c:\windows\system32\oobe\isperror\ispdtone.htm
c:\windows\system32\oobe\isperror\isphdshk.htm
c:\windows\system32\oobe\isperror\ispins.htm
c:\windows\system32\oobe\isper... Read more

A:Combo Fix Report System Fix Bug

Thanks for your patience here is more. Note this is after running combofix.

.
DDS (Ver_2011-08-26.01) - NTFSx86 NETWORK
Internet Explorer: 8.0.6001.18702
Run by Admin at 15:36:43 on 2011-12-21
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.510.326 [GMT -7:00]
.
.
============== Running Processes ===============
.
C:\WINDOWS\system32\svchost.exe -k DcomLaunch
svchost.exe
C:\WINDOWS\system32\svchost.exe -k netsvcs
svchost.exe
svchost.exe
C:\WINDOWS\system32\userinit.exe
C:\WINDOWS\Explorer.EXE
.
============== Pseudo HJT Report ===============
.
uStart Page = hxxp://www.google.com/ig/dell?hl=en&client=dell-inc&channel=us
BHO: Adobe PDF Link Helper: {18df081c-e8ad-4283-a596-fa578c2ebdc3} - c:\program files\common files\adobe\acrobat\activex\AcroIEHelperShim.dll
BHO: TmIEPlugInBHO Class: {1ca1377b-dc1d-4a52-9585-6e06050fac53} - c:\program files\trend micro\client server security agent\bho\1007\TmIEPlg.dll
BHO: SSVHelper Class: {761497bb-d6f0-462c-b6eb-d4daf1d92d43} - c:\program files\java\jre1.5.0_06\bin\ssv.dll
TB: {2318C2B1-4965-11D4-9B18-009027A5CD4F} - No File
mRun: [QuickTime Task] "c:\program files\quicktime\qttask.exe" -atboottime
mRun: [PC Meter Connect] c:\program files\pitney bowes\pc meter connect\mailstationAssistant.exe minimize
mRun: [Adobe Reader Speed Launche... Read more

6 more replies
Answer Match 43.68%

Hi,
Any ideas as to what this notification means and what could be done to rectify matters:---

"Missing Events in Event Log.....19% (3,985) missing "

A:System Health Report

Probably nothing to be concerned over. It is only a list of events, tasks, errors that windows has encountered. Were you looking for something specific?
But it would be a good idea to sacn with Malwarebytes and Super AntiSpyware, see links in my sig. Update each and do a FULL scan.

3 more replies
Answer Match 43.68%

i did the ( generate a system health report) on my system and
something don't seem right to me .



after i did the system health report i did the (wei) again. (removing
the old score first.)



as you can see the things that it said are poor got a 5.8/5.9 on the wei .
can someone help please...

More replies
Answer Match 43.68%

Anyone familiar enough with a sys health report to care to take a look for me and decypher it? There are several concerns in it. Just need to know how serious, or should I disergard? That being said, I'm not sure how to even post that one.I don't think I've ever had this many issues in this short a time span ever. I'm prety sure this one stems from the whole partition thing. Oh, while I'm thinking of it, any suggestions on the best config. to manage partitions? Single OS boot, dual HDD (internal)

A:system health report

Hello Dreemwarrior,

I'm sure that if you post screenshots of the ones that you were concerned about, that people may be able to help where they can for it.

8 more replies
Answer Match 43.68%

Who would be the person to read my System Health Report? Is that even possible? Isnt that where the problems are put in detrail?

A:System Health Report

System Health Report? What program gave you that?

11 more replies
Answer Match 43.68%

I generated a system health report and notice in the basic system checks in the hardware device and driver check the result is failed.

I have updated my bios to the latest and installed all of the drivers available from hp for my system for windows 7 64 bit. Anything I should be concerned about?

Thanks

A:System health report

Are you noticing any changes in ability to perform?

Cheers,

2 more replies
Answer Match 43.68%

Is there a direct command to open the System Health Report?

A:System Health Report

You could run Event Viewer. That gives all the errors that have occurred on your system so you can rectify them.

2 more replies
Answer Match 43.68%

Hi Forum,
The following alerts appeared in the above and I do not know what to do about them. One suggestion was to Format my CDrive which I am loth to do because it was done a few month's ago to Factory Settings,,a pain. Maybe someone can help.

Severity..Warning..A high rate of 114 split 1/0 per second was detected. Consider size of 1/0 processes compared to disc format size and defragment or reformat any discs with a high split 1/0 rate....

Severity..Info...the average disc queue length is 4. The disc may be at it's maximum capacity due to throughput and disc seeks......

I should state that I generally maintain my PC perfectly..ie. Defrags, DiscCleanups. checking Hard Drive and all SAFE recommended processes. System is Windows Vista Home Premium (64bit). Have also ran Memory Checks..perfect.

A:System Health Report

The first thing is to back up any important information. Then make sure that your HardDrive is ok. Go to the website of the manufacturer and test it.

7 more replies
Answer Match 43.68%

im trying to post my BSOD problem and when i reading the instruction i got stuck at instruction number 3... it says
3. Run a System Health Report - START | type perfmon /report - a viewer will appear | Click on "File" and "Save As" an HTML file (default file extension)
but i don't see view or anything... I'm going to post a picture on what i see, maybe somebody can tell me what to do with more specific instructions, click on the picture!!

A:eh System health report?

Hi,

When you click on perfmon /report it should immediately tun a peformance report (as shown below). When its finished, click File > Save then.

Regards,
Golden

2 more replies
Answer Match 43.68%

hi i have been attempting to run a system health report but when i do its says, error: An error occured while attempting to generate the report/ the system cannot find the path specified. Any ideas what the peoblem could be guys? And THANKS IN ADVANCE!!

A:System health report

What are you doing to try and run the report?
Please give us a step by step listing of what you're doing.

1 more replies
Answer Match 43.68%

At Start type in "perfmon /report" (without the quotes) and press Enter.
It'll give you all sorts of information about the system and any problems that it detects.

FWIW - you can also get to it by going to: Start...Control Panel...System and Maintenance...Performance Information and Tools...Advanced Tools...Generate a System Health Report

There's lot's of other good stuff located in Advanced Tools (such as the Performance Details portion of Event Viewer).

A:System Health Report

Thanks JohnMy system checked out A - OK

4 more replies
Answer Match 43.68%

Hello Forum,
The following notifications have been in my system health section for some months now. Are they anything omnious ?

A:System Health Report.

Wiki:

Workstation - Process and Service wiki

Remote Access Connection Manager - Process and Service wiki

2 more replies
Answer Match 43.68%

Hi Forum,
Regarding above I am getting two notifications that I should like advice on:

(1) Missing Events in Events Log amounting to 16% lost.
(2) Keep being informed that Windows cannot find a working Anti-virus system even
though one is up and running. I cannot seem to be able to configure the System to
stop checking this status.

I suppose neither are critical since my system is working perfectly and I
am not particularly concerned. But I should like to remove these notifications by
rectifying what is causing them. Help appreciated.
System Windows Vista Home Premium (64bit).

A:System Health Report

Point number 2
There seems to be a bug in the anti virus status report. Unless you are using MSE, there have been many reports of no anti virus. I would not worry about that aspect.
http://www.winhelponline.com/blog/re...ndows-7-vista/

8 more replies
Answer Match 43.26%

i have a conflict somewhere in this machine that i cannot track down.....almost daily i get a serious error message on reboot.....i have saved the error report and sysdump files.....can someone go over them and tell me what the problem is?

thanx


Inline Attachment Follows: manifest.txt

Server=watson.microsoft.com
UI LCID=1033
Flags=1696080
Brand=WINDOWS
TitleName=Microsoft Windows
DigPidRegPath=HKLM\Software\Microsoft\Windows NT\CurrentVersion\DigitalProductId
ErrorText=A log of this error has been created.
HeaderText=The system has recovered from a serious error.
Stage2URL=/dw/bluetwo.asp?BCCode=3b&BCP1=00000000C0000005&BCP2=FFFFF8000103182D&BCP3=FFFFFADF8B789140&BCP4=0000000000000000&OSVer=5_2_3790&SP=2_0&Product=256_1
DataFiles=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\WERa6bc.dir00\Mini120709-01.dmp|C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\WERa6bc.dir00\sysdata.xml
ErrorSubPath=blue
DirectoryDelete=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\WERa6bc.dir00
Inline Attachment Follows: sysdata.xml
<?xml version="1.0" encoding="Unicode" ?>
<SYSTEMINFO>
<SYSTEM>
<OSNAME>Microsoft Windows XP Professional</OSNAME>
<OSVER>5.2.3790 2.0</OSVER>
<OSLANGUAGE>1033</OSLANGUAGE>
</SYSTEM>
<DEVICES>
<DEVICE>
<DESCRIPTION>AMD Processor</DESCRIPTION>
<HARDWAREID>ACPI\AuthenticAMD_-_AMD64_Family_16... Read more

More replies
Answer Match 43.26%

I generated a health system report in vista. I did not pass the disk check . the syptom is that disk D has only 15% space left. does anyone know why this recovery D disk uses so much , and how to reduse it . I have tryied reducing to 900mb from 1gb in comand prompt.
 

A:Vista system health report

It is likely that D: is a partition used by the computer manufacturer to store restore files or diagnostic files. If it is then don't mess with it and ignore the error.
 

1 more replies
Answer Match 43.26%

When I generate a system health report, this is just what it shows, even if I ran a sfc /scannow it still can't be fixed.
What should I do?

A:Can't Generate System Health Report

* Have you used a Registry Cleaner?
{I recommend against the use of Registry Cleaners as they often create problems - unless you know exactly what is being deleted.}

* I suggest you run sfc /scannow yet again.

* Have you a System Restore point prior to this happening?

*For your consideration -
Repair Install

2 more replies
Answer Match 43.26%

PLEASE someone help. I don't really know what I am doing. My mum's system is very very slow. I have followed the instructions and below is the hijackthis report. What do I do now. (On another note, on the CPU usage fssm32.exe uses alot of memory).

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 00:46:39, on 28/10/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Trusteer\Rapport\bin\RapportMgmtService.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\acs.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\Program Files\TalkTalk Online Security\Anti-Virus\fsgk32st.exe
C:\Program Files\TalkTalk Online Security\Anti-Virus\FSGK32.EXE
C:\Program Files\TalkTalk Online Security\Common\FSMA32.EXE
C:\Program Files\TalkTalk Online Security\Common\FSMB32.EXE
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\svchost.exe
C:\Program Files\TomTom HOME 2\TomTomHOMEService.exe
C:\Program Files\TalkTalk Online Security\Common\FCH32.EXE
C:\Program Files\TalkTalk Online Security\Common\FAMEH32.EXE
C:\Program Files\TalkTalk Online Security\Anti-Virus\fsqh.exe
C:\Program Files\TalkTalk Online Security\FSPC\fspc.exe
C:\Prog... Read more

More replies
Answer Match 43.26%

I tried to follow the BSOD Posting Instructions but when I try to run a system health report (PERFMON) I get the message:
Error:
An error occured while attempting to generate the report.
The system cannot find the path specified.

My computer keeps blue screening on start up after entering my password. I dont know what to do and I really cant afford a new laptop

Please help!

More replies
Answer Match 43.26%

I just created a batch file for a colleague at work, for a System Health Report on Windows 8.1, like the one in Seven. It's a Zip folder with a shortcut and instructions also. I did it this way so he doesn't always have to do it manually in a command prompt, just double click the shortcut(Admin privileges).

Since it's "hidden" in Windows 8 and not accessible under the Advanced Tools window (which doesn't exists anymore)> "Generate a System Health Report", I thought I'd share with anyone else that's interested...

More replies
Answer Match 43.26%

Hi people i got up this morning to find my pc had recovered from a serious error below i have added the report and also at the very bottom i have included some of my systems info.Could someone advise me of what to do next or shall i continue using my pc as normal
many thanks in advance

Solution not found: consider BIOS Upgrade

Thank you for submitting an error report.

Problem description

Microsoft is unable to determine what specifically caused the problem you reported.

Consider BIOS Upgrade

During the crash analysis, we noticed the basic input/output (BIOS) system version on this computer does not match the specifications for the processor that is installed on your computer. This can occur when a newer processor is installed on an older system board or older BIOS. Using a BIOS that does not support the installed processor can result in Windows system crashes. Please contact your computer manufacturer or motherboard manufacturer for an updated version of BIOS for your computer's processor.

Important: Upgrading the BIOS version may require moderate to advanced troubleshooting skills. If you are uncomfortable with performing these steps, you might want to consider consulting with paid technical support.

If your computer contains an Intel processor, you can use special utilities to identify your specific processor. Please click the following link for more information:

Intel Processor Identification Utility

List of BIOS Manufacturers

For a list of BIOS manufactu... Read more

More replies
Answer Match 43.26%

please review this if you can't generate a system health report the common way

A:system health report workaround !!!!!!!!!!!

Thanks for sharing. I am sure that will help many people to come.

Richard

3 more replies
Answer Match 43.26%

I ran a system health report and received this error:

Abnormally Stopped System Services[IMG]res://wdc.dll/flag.gif[/IMG]
[IMG]res://wdc.dll/error.gif[/IMG]
A service is reported as having an unexpected error code
One or more services has failed. The service did not stop gracefully, suggesting the service may have crashed or one of its components stopped in an unsupported way.
Service exited with code not equal to 0 or 1077
Restart the service
Top: of 1


Service

[IMG]res://wdc.dll/close.gif[/IMG]
0110311421761907mcinstcleanup
Display Name:
McAfee Application Installer Cleanup (0110311421761907)

Exit Code:
1067

Service Name:
0110311421761907mcinstcleanup

Path:
C:\windows\TEMP\011031~1.EXE -cleanup -nolog

Service Code:
0

Started:
False

State:
Stopped



I uninstalled mcafee when I got kaspersky but it appears there is something left over. When I copy the link and search it I get a pop up asking if I want Mcafee to make changes to the computer (standard pop up when downloading something) but that is it. How do I clean this up?

A:System health report error

I found the McAfee Application Installer Cleanup (0110311421761907) after typing in services.msc under the run command. Should I disable this?

2 more replies
Answer Match 43.26%

On Saturday I got the first of these. I was on the internet, pressed the back key and the computer shut down without warning of any kind. It was slow to boot back up which it did of its own accord. Then displayed this message,

"The system has recovered from a serious error." A log was created etc.

Error signature reads:

BCCode: 1000008e
BCP1: C0000005
BCP2: 8056C329
BCP3: F305D484
BCP4: 00000000
OSver: 5_1_2600
SP: 2_0
Product: 768_1
Error report contents:
C:\DOCUME~1\User1\LOCALS~1\Temp\WER5942.dir00\Mini060205.01.dmp
C:\DOCUME~1\User1\LOCALS~1\Temp\WER5942.dir00\sysdata.xml

Sent an error report to Microsoft which directed me to this page.http://oca.microsoft.com/en/response.aspx?SGD=3661d243-65d9-416e-9573-0e8a12f2ac80&SID=10

Tonight the exact same thing happened again, shut down without warning, very slow to boot back up etc. I was on the internet and had just opened OE to check for mail. Once the comp restarted it again showed "The system has recovered from a serious error." message.

BCCode: 18000c5
BCP1: 00060404
BCP2: 00000002
BCP3: 00000001
BCP4: 80550505A1
OSver: 5_1_2600
SP: 2_0
Product: 768_1
Error Report:
C:\DOCUME~1\User1\LOCALS~1\Temp\WER651d.dir00\Mini060605.01.dmp
C:\DOCUME~1\User1\LOCALS~1\TEMP\WER651d.dir00\Minisysdata.xml

This time the error report sent me to a useless page! http://oca.microsoft.com/en/404.aspx
http://oca.microsoft.com/en/404.aspx
My operating system is XP, and I use AOL 9, Outlook Express and Inter... Read more

A:System recovered from serious error report?

8 more replies
Answer Match 43.26%

I am running Vista SP2 Home Premium and I get a message every time I run system health reports. It says I have no Antivirus or Malware running on my system.
I have Avast 4.8 as the Antivirus and for spy/malware protection Spybot, Malwarebytes and Spyware Blaster.
For a while the security center ALSO reported no Antivirus/Malware protection. Resovled this issue by reinstalling Avast and rebuilding the /Windows/System32/WBEM/Repository folder by deleting it (temp stopping the WMI in services) and reboot.
but the health report still says no antivirus or malware programs detected.
System Center looks normal.
Been doing googling on the issue and seems that some vendors such as Norton have said this is a possible bug with both Win7 and Vista. Probably due to a bad windows update (the monthly ones). Makes since because this issue started not too long ago.
It's not a biggie but I like having my system healthy and smooth
Any other people had this happen?? If not, I recommend trying the health report (in Control Panel - Performance Info and tools - Advanced tools - Generate System Health report) for the rec I use control panel in Classic View.
you might get the same results..

A:issues with system health report.

Its a bug. The way to resolve it is to use Microsoft Security Essentials
and
Malwarbytes
and
The windows firewall
'
This is excellent protection, used by most of us here, free and easy to use

You may be able to find a temporary fix with other software, but it will problably be short lived.

Good luck

4 more replies
Answer Match 42.84%

Can anyone help me? On Vista SP1, when I run the Generate System Health Report inside Reliability and Performance Monitor, it "collects data" for the 60 seconds and then gives me an error box as follows:


"An error occurred while attempting to generate the report:
The wait for the report generation tool has timed out."

Can anyone help me solve this? I would like to use the system health report feature. Thanks in advance.

More replies
Answer Match 42.84%

Since apparently they removed the Performance and Information Tools section of the Windows 8.1 Control Panel, I haven't been able to find a way to generate a System Health Report.
Anyone got a good guide on how to generate one? Or did they remove the capability of generating one? I know I had one in 8 but I upgraded to 8.1 and nope. No section for it? D:

A:How do I generate a System Health Report in Windows 8.1?

Try here---

System Health Report - Generate and View in Windows 8.1

4 more replies
Answer Match 42.84%

Every time I run System Diagnostics it collects the data for 60 seconds and then I am asked do I want to open or save this file:

report.html.

If I save or open it I am greeted with a blank webpage saying navigation cancelled and the System diagnostic screen still says generating report

Any thoughts on why this is happening?

A:Problems generating a report with System diagnostics

  
Quote: Originally Posted by frozenreads


Every time I run System Diagnostics it collects the data for 60 seconds and then I am asked do I want to open or save this file:

report.html.

If I save or open it I am greeted with a blank webpage saying navigation cancelled and the System diagnostic screen still says generating report

Any thoughts on why this is happening?



Check in event viewer by typing eventvwr in search. Look in windows logs, application tab.

You are looking for critical errors (they have red in the left column) that have app hang, app crash, or anything relating to the problem.

When you find them pplease note the event ID and source code and tell us what they are.

Let us know if you need help with any of these

Ken

7 more replies
Answer Match 42.84%

Folks, I've got some problems...

My system resources are constantly going up to 100% for programs that shouldn't be using that much, my PC is running slowly, ESPECIALLY when opening a new Windows Explorer window OR Internet Explorer window.

The other day, I got a msg from Windows that it was increasing some virtual memory space, or something like that, since I had run out. Now, my major web site design program (NetObjects fusion) gives me a msg saying "Out of Memory" when trying to open one of my sites.

I have suspicions that there is some type of virus/spyware/adware that is the culprit. Months ago, I somehow got a virus that spread a bunch of junk through my system (before this, my 2 year old PC worked GREAT). I have Norton Antispam on my system (pop-up blocker), run Spybot and Spy-Sweeper daily, and have NAV. It cleans stuff up, and fixed a lot of problems. But, the PC never went back to normal. I did a system restore, but no better. I defragged recently (w/ last 3 weeks). When I run NAV, it finds about 7 "vulnerable" files, including 2-3 memwatcher variations, but can't fix any of the problems.

Today I downloaded HijackThis. Below is the report. Thank you, thank you, thank you for any help you can give.

Ryan

--------------------
Logfile of HijackThis v1.98.0
Scan saved at 4:59:22 PM, on 7/12/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINNT\System32\smss.... Read more

A:System resources drained (w/ HijackThis report)

7 more replies
Answer Match 42.84%

Can anyone help me? On Vista Home Premium SP1, when I run the Generate System Health Report inside Reliability and Performance Monitor, it "collects data" for the 60 seconds and then gives me an error box as follows:


"An error occurred while attempting to generate the report:
The wait for the report generation tool has timed out."

Can anyone help me solve this? I would like to use the system health report feature. Thanks in advance.http://www.techsupportforum.com/images/smilies/wave.gif

A:Generate System Health Report Problem

Problem solved. For those having same issue: For whatever reason the "Generate System Health Report" function inside the Advanced Feature of Reliability and Performance module does not work properly. The graphic and detail is actually generated, but is not able to be displayed as a REPORT. To generate a system health report, you must set up a "USER DEFINED" data collection set.
Once a user defined data collection is set up, start the data collection and when it stops (at whatever duration you previously choose) the graphic monitor and html report will be available to view under User Defined Reports.

2 more replies
Answer Match 42.84%

Logfile of Trend Micro HijackThis v2.0.2Scan saved at 2:22:01 PM, on 5/30/2010Platform: Unknown Windows (WinNT 6.01.3504)MSIE: Internet Explorer v8.00 (8.00.7600.16385)Boot mode: NormalRunning processes:C:\Windows\system32\taskhost.exeC:\Windows\system32\Dwm.exeC:\Windows\Explorer.EXEC:\Windows\System32\rundll32.exeC:\Windows\System32\rundll32.exeD:\Program Files\SUPERAntiSpyware.exeC:\Windows\system32\wuauclt.exeG:\Program Files\Mozilla Firefox\firefox.exeD:\Program Files\Trend Micro\HijackThis\HijackThis.exeR1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = about:blankR1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch = R1 - H... Read more

A:Below is the HIjackthis report, system was affected with fakeAV

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below I will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the instructions... Read more

2 more replies
Answer Match 42.84%

Hi,Just ran this test and i get an error on "hardware device and drivers check".
Is this something to worry about?laptop seems to be running fine.
Thanks in advance for any help.

A:Generate system health report error?

Without knowing anything about the testing program, I'd say don't worry.

You could look in device manager and see if it reports any driver issues (yellow exclamation marks).

If all of your hardware and software is running as expected, it's tough to get worried based on such a report.

3 more replies
Answer Match 42.84%

hello, my name is chris jones.

Simply put. I turned on my PC. Windows 7 said 'Windows failed to Load'. I remember something about a system file was corrupted and WIN7 was attempting to fix it. After about 10 mins it started up.

I believe that the pc restored itself to a previous state.

I would like to find out what caused the need to restore the machine in the first place. So, Does Windows 7 keep a log/report that holds any information that i can look at?

------ THE COMPLEX VERSION ------

My Problem:-

THURSDAY:-

- I installed 'Republic - The Revolution'.
- Auto System restore point Made (labeled 'Republic - The Revolution').
FRIDAY, 11:00 AM. PC Turned on as normal.

- I installed 'Black'n'White and Creature Isle', 'Turok' and 'Universe at War'.
- I updated Diablo 2 from V1.07 to v1.12.

I played Diablo 2 for about 14 Hours Straight. At about 3:00 AM i went to bed leaving the PC on.
SATURDAY, 11:00 AM. I sat down at my computer and installed 'Brothers in Arms - Earned in Blood'. Once it had finished installing, a prompt said that 'StarForce Protection requires a restart to finalize the installation'.

I went ahead with the restart. It restarted correctly up until the windows 7 screens pops up. Windows 7 informed me that 'the computer failed to start'. The computer then spent about 10 mins fixing the problem. Once it started up i noticed a few things.

- Desktop Icons reverted to where they were on Thursday.
- A small program called Diablo 2 Hero Editor executabl... Read more

A:Does WIN7 keep a log/report of what caused a system restore?

starforce is mainly incompatible with most hardware, and windows 7, I don't recommend to install that software to anyone.
My syster had horse/pony game with starforce protection. after I installed it I immediately throw away the disc into the trash can. Wasted money.


But ontopic, yes, win7 does keep track of crashes, search for .dmp files and check you application error report logs, should be easy to find.

1 more replies
Answer Match 42.84%

Hello,

I read another post where someone had similar problems and he posted a hijack report for help. Bullguard found a system.32.exe virus and a tanked.11 virus but may have fixed the latter. Before I do anything dangerous I thought I'd post here for advice. Any advice?

Thanks!
Logfile of HijackThis v1.97.6
Scan saved at 6:29:37 PM, on 11/17/2003
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\CTHELPER.EXE
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\MusicMatch\MusicMatch Jukebox\mmtask.exe
C:\WINDOWS\System32\ctfmon.exe
C:\Program Files\BullGuard\avxnews.exe
C:\PROGRA~1\Altnet\DOWNLO~1\asm.exe
C:\WINDOWS\System32\P2P Networking\P2P Networking.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\WINDOWS\system32\xcommsvr.exe
C:\Program Files\Messenger\msmsgs.exe
C:\WINDOWS\system32\utilman.exe
C:\Program Files\BullGuard\mgui.exe
C:\Documents and Settings\End User\Desktop\HijackThis.exe

F0 - system.ini: Shell=Explorer.exe C:\WINDOWS\System32\System32.exe
F2 - REG:system.ini: Shell=Explorer.exe C:\WINDOWS\System32\System32.exe
O2... Read more

A:[SOLVED] system 32 virus and hijack report

16 more replies
Answer Match 42.84%

In system upgrade won't run, it report it can not install 64 bit on 32bit and vice versa.
I know 100% it is a win7 pro x64 version and computer properties also claims this.
The history is that a week ago I notice most updates has fails since 17 june 2011,
But now I get notificed! I tryed to download these MS update fixes, I tried to clean update history etc. But update keeps failing. I read Binck turial 3413 about using in system upgrade to repair, I have the original install DVD. But the upgrade reports I cannot install 64 bit on 32 bit and vice versa, actually both message in the x64 try.
I tryed disable all non MS services using msconfig including my NOD32 antivirus doing the in system upgrade. I have loads of programs it will take many hours to reinstall and configur all programs to put data on a separate partion as I require.
All my tryes have made it crash when I should go into sleep, but I can still do a normal boot. Should I try in save mode?
Any other way ?

A:In system upgrade won't run, report it can not install 64 bit on 32bit

Tryed in safe mode, got the same two messages plsu the message can not upgrade in safe mode

3 more replies
Answer Match 42.84%

Once upon a time it worked, I don't know when it did stop working.

I am a fiddler, and by that I mean, I go into services.msc and turn off (disable) any features that I do not use or require. Is it possible that I have turned off something that requires this to work?

A:Unable to Generate System Health Report

Originally Posted by Fiery


I am a fiddler, and by that I mean, I go into services.msc and turn off (disable) any features that I do not use or require. Is it possible that I have turned off something that requires this to work?



That's quite possible. Won't don't you try turning them back on and rebooting?

13 more replies
Answer Match 42.84%

Hi,

I've been having problems with constinuous pop-ups of ads site. Also, I've been getting Systemerrorsite with a message saying that my computer is running slow and that I should download from it. I've constantly close it down before it gets installed on my computer. It just started doing this on Saturday. I have subscripton to Norton 360 and it was installed months ago. After I kept getting these pop-ups I check to see why Norton didn't prevent this. I could not find it. Somehow it got deleted from my system and also I checked my firewall and they were off. I've installed the Norton 360 and ran a system scan hoping that I correct my problem - it didn't)and turned on my firewall. I've followed your direction with the five steps except installing the spyware on step 4 since I already have Norton 360 installed and running.

Here's the active scan report:

;***********************************************************************************************************************************************************************************
ANALYSIS: 2008-04-21 05:02:27
PROTECTIONS: 1
MALWARE: 63
SUSPECTS: 0
;***********************************************************************************************************************************************************************************
PROTECTIONS
Description Version Active Updated
;====================================================================... Read more

A:Deckard System scanner report-continuous pop-ups

Please download SDFix from here and save it to your desktop

Double click SDFix.exe and it will extract the files to %systemdrive%
(Drive that contains the Windows Directory, typically C:\SDFix)

Please then reboot your computer in Safe Mode by doing the following :
Restart your computer
After hearing your computer beep once during startup, but before the Windows icon appears, tap the F8 key continually;
Instead of Windows loading as normal, the Advanced Options Menu should appear;
Select the first option, to run Windows in Safe Mode, then press Enter.
Choose your usual account.

Open the extracted SDFix folder and double click RunThis.bat to start the script.
Type Y to begin the cleanup process.
It will remove any Trojan Services and Registry Entries that it finds then prompt you to press any key to Reboot.
Press any Key and it will restart the PC.
When the PC restarts the Fixtool will run again and complete the removal process then display Finished, press any key to end the script and load your desktop icons.
Once the desktop icons load the SDFix report will open on screen and also save into the SDFix folder as Report.txt
(Report.txt will also be copied to Clipboard ready for posting back on the forum).
Please copy and paste that log in your next reply.

=================================


Ok.We need to download ComboFix.exe. This will give a better view to the files running and also hidden on your computer.

Please visit this w... Read more

9 more replies
Answer Match 42.84%

Hi,

Does anyone know of a good program that will allow me to find out basic system specs on all PCs in my domain? I need to know which PCs have what amount of RAM for upgrading, but there are so many going to each one would be really tasking.

Thanks.
 

A:Solved: Domain PC system specs report

Posted via Mobile Device
Look at Steel Inventory and SpiceWorks.

Although I am pretty sure a simple WMI script would probably work fine as well.
 

2 more replies
Answer Match 42.84%

Good morning. I am a first time poster (with not much tech experience). I just generated a General System Health Report on my HP Pavilion DV6 x64 bit laptop.

Under the results, I receive the following Warnings/Error

Symptom: A service is reported as having an unexpected error code

Cause: One or more services has failed. The service did not stop gracefully, suggesting the service may have crashed or one of its components stopped in an unsupported way.

Details: Service exited with code not equal to 0 or 1077

Resolution: Restart the service


Symptom: The Workstation service has stopped abnormally.

Cause: Application Error. Exit code 1077.

Resolution: Restart the service

Could you please advise me as to what this means and how I can fix it? Thank you very much for any assistance you can provide me.

David

A:General System Health Report Error - Please Help

Hi David, and welcome to vistax64.

First, please enter your system specs in the lower left portion of your window.

Then, go to c:\windows\minidump , zip the dump file (*.dmp) and upload it to us we can help.

When you receive the warning, is the system rebooting? Blue Screen?

4 more replies
Answer Match 42.84%

I recently built a new system from scratch and all was fine for a couple days; now I get the BSOD randomly. I know where the dump files are located but I unfortunately don't know how to read them correctly. As requested I've attached the TSF_Vista_Support + system health report to the tread if anyone could lend a hand. If anyone could provide some insight as to why I'm getting these random BSOD's I'd greatly appreciate it.



Here's the specs on the system:

OS: Windows 7 Ultimate 64 bit

Ultra LSP 750 watt PSU

AMD Phenom II 955

OCZ AMD Black Edition 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600

MSI NF980-G65 AM3 NVIDIA nForce 980a SLI HDMI ATX AMD Motherboard

EVGA 01G-P3-1158-TR GeForce GTS 250

LG 22X DVD?R DVD Burner Black IDE Model GH22NP20

Rosewill RCR-IC002 74-in-1 USB 2.0 3.5" Internal Card Reader w/ USB port

A:BSOD TSF_Vista_Support + system health report

The first thing that I can suggest is to get some more memory.
Your system report shows 1.87G of physical memory.
It also shows 1.87G of pagefile space.

You need at least 2G of physical and 3G of pagefile to run W7 in any sort of efficient manner.

I only looked at a couple of the BSOD logs and didn't post the results
because they pointed me to this as a potential cause.

Please run this as it may point out another possible issue as well.
http://www.microsoft.com/windows/win...e-advisor.aspx

7 more replies
Answer Match 42.84%

The HP Healthcheck on my Presario laptop said that I had maintenance and security problems. Upon further reading, I find that the HP health check is not worth much, so I generated a Vista System Health Report. It said that my 'V x D loader' had 'failed' along with the 'Hardware Device and Driver checks'. I have never seen any error messages about these things and the laptop seems to be running fine. I don't know what these things are or do. Should I ignore them until I get constant errors messages and my laptop starts behaving oddly?
Thanks.
 

More replies
Answer Match 42.84%

Hello,
 
Been following the BSOD posting instructions, I downloaded the Sysnative BSOD Dump + System File Collection App and it run just fine and created the zip, but when I try to run the PERFMON System Health Report (I'm using Windows 8.1) I keep getting an error message that says:
 
 



Error:


 

An error occured while attempting to generate the report.


 

 

The operator or administrator has refused the request.

 
 
Help anyone?

A:PERFMON System Health Report ***ERROR***

Just submit the Sysnative report. Don't worry about Perfmon for now
Sent from my phone

3 more replies
Answer Match 42.84%

P4 machine
Gigabyte motherboard
1 GB ram
Windows XP home SP2
Audigy soundcard
Nvidia GForce 5600 graphics card.

Got hit with Virtuamonde trojan.

Ran a barrage of scans, with Trojan Hunter, Spybot Search and Destroy, Panda Anti-Virus, Adshampoo Firewall (yes, a mixed bag). Even ran Hitman Pro 2 overnight.

Eventually got system to a usable state, although, not fast, and it ran reasonably well for about a week, then it really slowed up again

Problem is, how to verify if my system is truley clean and to establish what damage to system files etc has to be addressed.

Currently, IE6 and other running programs halt, task manager shows them to be not responding, but given time, they resume, another click on the program window starts this not responding cycle again.


Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\SYSTEM32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Spyware Doctor\pctsAuxs.exe
C:\Program Files\Spyware Doctor\pctsSvc.exe
C:\Program Files\Spyware Doctor\pctsTray.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Internet Explorer\iexplore.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\uTorrent\uTorrent.exe
D:\Software\Anti_Virus\HiJackThis.exe
C:\WINDOWS\system32\wbem\wmiprvse.exe

... Read more

A:(XP system) Applications constantly report - not responding

Bump!

15 more replies
Answer Match 42.84%

OK, lets see if we can get this one to work next

Seems to be quite common out there.

I run the application and get the little timer saying its working for 60 seconds then it fails and gives the error message:

A:Generate a system health report does not work

Take a look at C:\Perflogs. See what is in that folder.

As a test, rename C:\Perflogs to C:\Perflogs-save then create a new C:\Perflogs.
Try the health report, see if it works now.

Found this here: Cannot "Generate System Health Report" (i.e., TIME-OUT - Microsoft Community

4th post in thread by EyeAmSMF.

5 more replies
Answer Match 42.42%

Hi, After upgrading from vista to windows 7 i tried to generate a system health report. now , i never had problems with this before, i ran the windows scannow in cmd and all is fine , i checked the performance and logs service and that was started and manual , the reports are being registered in the perflogs folder but the tool used to generate the report in HTML seems to time out and is incapable of generating a report like in vista before the upgrade. By the way i'm running 64 bit home premium windows 7 , asus P5Q motherboard and an ATI Radeon 4850 graphic card, Thanks for any help in solving this y:

A:Time-out error generating system health report

Well People, Just to give you some feedback, It seems that the in-place upgrade feature offered to migrate from vista to windows 7 has some flaws.This feature imports files which are somehow corrupted or modified ,which can result in a number of small "glitches".For myself i resolved this issue by doing a clean install and this was the fix.apparently some people do not think that the in-place upgrade should be available ,for this has created a number of small but annoying problems.Best RegardsGreg

2 more replies
Answer Match 42.42%

I've been having those symptoms for a while, my system is acting up from time to time, suddenly windows functions don't work, like backup system... it opens up, but when I click on the "change settings" link nothing is happening. Couldn't start system manager by right clicking my Computer, nor can I start any link in the Windows pane as an administrator... it shows up... it just doesn't do anything when I click on it.
... but now, it just resets on me no matter if it's under load or not... it happens every couple of hours.

I've been screwing around with my system lately, you know.. read a suggestion on the Internet, had to try it and stuff, but the problem is I've done a lot of changes without fully testing if one change didn't have ill effects, now I'm not able to remember what I've changed and what I should change back, or even if that was the problem.

I disabled some services, and some just put on the manual startup, that could be it.
Although I did put them back on according to the list and it didn't change a thing...

So... could you possibly take a look at my HJT log, just to make sure it's not a malware related issue. I did run Malwarebytes, but it didn't find anything.

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 04:44:31, on 2011-10-27
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16421)
Boot mode: Normal

Running processes:
C:\Program Files... Read more

A:Suden System resets. possible malware involved HJT report

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything. We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/425201 <<< CLICK THIS LINK If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.*************************************************** If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lo... Read more

2 more replies
Answer Match 42.42%

About 3 months ago i started noticing that when ever i open certain sections of control panel and some start menu items that they try to start up and then close immediately with no error report at all. They just seem to go away. It seems to be the programs that usually end up opening into a modified explorer window:
(i.e. Control Panel: "Backup and restore, Default Programs, Ease of Access Center, Fonts, Network and Sharing Center, Parental Controls, Performance Information and Tools, Personalization, Power Options, System, User Accounts, Windows Slideshow, and windows update)
(i.e. Start Menu: "Games, and Default Programs).

So i did some much needed computer maintenance hoping that that would fix the problem.

Ran AVG virus scan slow search full system. Found a few problems and corrected them. The problem persists.

Ran a hijack this and compared online and fixed a few minor issues. The problem persists.

Started a Process Explorer (from sysinternals) and found that when i try to launch these specific programs dwm.exe is the last thing to be working before it crashes.

I told it to put the process into debug mode but im not to familiar with the program to get some definitive results.

Also tried opening the before mentioned items in safe mode and it still does the same thing.

If anyone can help i would be very great full.

Also if there are any reports, logs, etc... that you need me to post to help determine the pro... Read more

A:Problems with dwm.exe (System windows closing without error report)

Operating System: Windows Vista™ Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.080917-1612)
Language: English (Regional Setting: English)
System Manufacturer: ASUSTek Computer INC.
System Model: L1N64-SLI WS
BIOS: BIOS Date: 01/18/07 20:12:52 Ver: 08.00.14
Processor: AMD Athlon(tm) 64 FX-74 Processor (2 CPUs), ~3.0GHz
Memory: 2046MB RAM
Page File: 939MB used, 3395MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 10
DX Setup Parameters: Not found
DxDiag Version: 6.00.6001.18000 32bit Unicode

Also figured some basic system information might be helpful

2 more replies
Answer Match 42.42%

my computer has not been running right the last week or so, so i downloaded sisoftwares sandra lite + it came up with the following report:
--------------------------------------------------------------------------------

<<< Computer Overview >>>
--------------------------------------------------------------------------------

Warning 100: Large memory sizes should be made of
Registered/Buffered memory.
Tip 2546: Large memory modules should be ECC/Parity.
Notice 5901: CD 1x= 150kB/s; Exercise caution when
comparing measured versus published ratings.
Notice 5902: DVD 1x= 11.08Mbps Exercise caution when
comparing measured versus published ratings.

<<< Mainboard >>>
--------------------------------------------------------------------------------

Warning 2544: System/Video shared memory greatly reduces
performance. Use external video card.
Warning 100: Large memory sizes should be made of
Registered/Buffered memory.
Tip 2546: Large memory modules should be ECC/Parity.

<<< Mainboard Configuration >>>
--------------------------------------------------------------------... Read more

A:sandra lite system report!! i dont understand

neild79 said:



Warning 100: Large memory sizes should be made of Registered/Buffered memory.
Tip 2546: Large memory modules should be ECC/Parity.
Notice 5901: CD 1x= 150kB/s; Exercise caution when comparing measured versus published ratings.
Notice 5902: DVD 1x= 11.08Mbps Exercise caution when comparing measured versus published ratings.Click to expand...

These messages are harmless.



Warning 2544: System/Video shared memory greatly reduces performance. Use external video card.Click to expand...

If you want to play the latest games with good image quality and frame rates, otherwise you're fine with the onboard graphics.



Notice 224: System BIOS : SMBIOS/DMI information may be inaccurate.
Tip 212: System BIOS : BIOS can be shadowed so check whether it is.
Tip 211: System BIOS : BIOS is flash-able and socketed so it can be upgraded when needed.Click to expand...

Sandra's information may be inaccurate too. BIOS upgrades are recommended only if there are known problems related to BIOS.



Notice 224: CPU 1 [Processor 0, Core 0, Thread 0] : SMBIOS/DMI information may be inaccurate.
Warning 236: CPU 1 [Processor 0, Core 0, Thread 0] : Vcore higher than rated maximum. Check Vcore setting!Click to expand...

Yes... Read more

1 more replies
Answer Match 42.42%

I am having periodic BSODs all of a sudden. I have attempted to debug the problem and have downloaded new MB and Video Card Drivers but all that seems to have changed is some info in the dump file.

Second issue is in gathering the information to post here.

I am experiencing problems with getting step 3 done with the Resource and Performance Monitor. When i run it i get...


Code:
The wait for the report generation tool to finish has timed out.
A solution i read online was to boot up with no services running so i did so and the outcome was...


Code:
The system cannot find the path specified.
Attached is a zip of the information i was able to retrieve.

A:BSOD Error and Issues with System Health Report

  
Quote: Originally Posted by Worsin


I am having periodic BSODs all of a sudden. I have attempted to debug the problem and have downloaded new MB and Video Card Drivers but all that seems to have changed is some info in the dump file.

Second issue is in gathering the information to post here.

I am experiencing problems with getting step 3 done with the Resource and Performance Monitor. When i run it i get...


Code:
The wait for the report generation tool to finish has timed out.
A solution i read online was to boot up with no services running so i did so and the outcome was...


Code:
The system cannot find the path specified.
Attached is a zip of the information i was able to retrieve.



Before we can ascertain the true cause you need to:
1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

2-Update to SP-1. Run the update readiness tool then update.
* Download > Install > Run the System Update Readiness Tool

Ensure yo... Read more

5 more replies
Answer Match 42.42%

With the update of the BIOS : Legacy Support cause "PAGE FAULT IN NON PAGED AREA" error with WINDOWS 8.1 and WINDOWS 10.
My System was installed with WIN10 and legacy support bios option.
After bios upgrade system won't boot.
Did a new install with a new disk, WINDOWS won't install same error.
New BIOS only support Linux (I did a successfull Ubuntu install with Legacy Support).
Only UEFI is supported with BIOS 01.05.A04 FOR WINDOWS.
To install windows : use a USB WINDOWS UEFI boot stick, and then windows can be installed.
Hope it will help. I spent time on it.
Vincent

A:BUG REPORT ? : Dell Inspiron 7359 System BIOS : 01.05.00, A04

Thank you very much Vincent. Dell program update my BIOS to the last version and it was impossible to install Windows. i do what you explain and I installed windows 10 Perfect.
Thank you so much for this.
Question: I have Dell 7359 and randomly freeze, Do you have the same problem?
I try this things and nothing worked.
Install graphic card driver from intel and from dell page.
Upgrade the CHIPSET driver (I download from dell webpage)
Nothing worked.

Thank you in advance

1 more replies
Answer Match 42%

Acronis Backup Software Email Notification Monitoring Software

Hello,

I am an IT Administrator and I have about 50 customers who have are using Acronis True Image to backup their workstations or servers. The Acronis programs are sending me email reports on a daily basis.

I am looking for software that will help me by monitoring all my Acronis True Image notifications for reports that are missing or have an error and then notify me of which specific one errored or is missing. Any ideas?
 

A:Looking for Software to Monitor and report on Email Notifications of System Backup Re

6 more replies
Answer Match 42%

I have windows 7 with Microsoft security essentials up-to-date but when i check the system health report(Control Panel\All Control Panel Items\Performance Information and Tools\Advanced Tools\Generate a system health report) it says there's no anti-virus

A:Microsoft security essentials missing in system health report

It's said that since I began using Windows 7, in the Beta build 7000 back in January 2009. Using Avast. I don't think it's anything to worry about. The system is aware you have a AV installed. You can tell from the action center giving you a popup when you don't have one installed. Had discussions of it from a long time ago, can't remember exactly what the answer was for why it's like that though. Either something with the programs vendor not bothering registering some file with it for detection in the health report, or having to be on Windows 7 fault that they never bothered fixing yet.

4 more replies
Answer Match 42%

Hi, After upgrading from vista to windows 7 i tried to generate a system health report. now , i never had problems with this before, i ran the windows scannow in cmd and all is fine , i checked the performance and logs service and that was started and manual , the reports are being registered in the perflogs folder but the tool used to generate the report in HTML seems to time out and is incapable of generating a report like in vista before the upgrade. By the way i'm running 64 bit home premium windows 7 , asus P5Q motherboard and an ATI Radeon 4850 graphic card,
Thank's for any help in solving this issue ,much appreciated

A:Time-out error generating system health report tool

Did you do an in-place Upgrade? Are there other performance problems?

You can try a Repair Install, but the cure for these kinds of failures of in-place Upgrading is a Clean Install.

Clean Install Windows 7

9 more replies
Answer Match 42%

I'm setting up a new machine purchased on 1/7. (not sure which specs might be helpful -- W7 Home Premium 64bit SP1/Intel i7-2600K/16GB ram/2 2TB 5400 RPM HD (RAID 0)/64GB SSD/2 AMD Radeon HD 6790 Crossfire)

I've noticed the following errors in the EV each time the computer's rebooted:

Kernel-EventTracing
Event ID 2
Session "" failed to start with the following error: 0xC0000022

The info in the Details window in EV includes "Execution ProcessID 1488". I opened Process Explorer immediately after this last error, and the process associated with 1488 is "svchost". In the extended properties for 1488 in Process Explorer, there's the following list under Services tab:

Base Filtering Engine
Diagnostic Policy Service
Windows Firewall

Not sure if this is connected or not, but I'm unable to run a System Health Report either. Each time it's attempted, the following error pops up: "Error: An error occurred while attempting to generate the report. Access denied."

There used to be another error in Event Viewer that came up with the Kernel-EventTracing error. It was WMI - Event ID 10:

Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected... Read more

A:Kernel-Event Tracing error/System Health Report

I have also had the Event 2 trace error (Circular Kernel Context Logger/Circular Kernel Session Provider). I never delved into why it's occurring but have seen people's questions on this plastered all over forums. Mine has since gone away.

Is the System Health report the big one that gives you a dozen categories and is basically a "trace" (probably using that above CKCL trace) for 1 minute followed by a capture of that data and then presented in a gui format.

9 more replies