Tech Problem Aggregator

# WEI test cannot be completed

Q: WEI test cannot be completed

Keep getting the same error over and over, tried many things (inclduing scf /scannow) but to no avail.

Here is the bit from the log:

Code:
1348769 (3424) - winsat\logging.cpp:0815: --- START 2011\10\30 17:15:04 ---
1348769 (3424) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -restart clean -cancelevent 8e00fb41-d1d6-4e88-8347-83b99be94b73
1348769 (3424) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
1348784 (3424) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
1348815 (3424) - winsat\main.cpp:4585: Watch dog system enabled
1348815 (3424) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
1348878 (3424) - winsat\main.cpp:2505: > DWM not running.
1348878 (3424) - winsat\main.cpp:2470: > EMD service will be restored on exit.
1348893 (3424) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
1348893 (3424) - winsat\main.cpp:2793: > power policy saved.
1348909 (3424) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
1348909 (3424) - winsat\main.cpp:2814: > power policy set to maximum.
1349736 (3424) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
1349736 (3424) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
1349736 (3424) - winsat\main.cpp:1775: > Run Assessment features
1349767 (3424) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
1360812 (3424) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
1360812 (3424) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
1360827 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
1366365 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
1371857 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
1377504 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
1383198 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
1388689 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
1394180 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
1399781 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
1405413 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
1413166 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
1420638 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
1425989 (3424) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
1546079 (3424) - media\mediaerror.cpp:0095: Hata: En fazla s?re a??ld?, makine ?ok yava? -- s?nama durduruluyor.
1546391 (3424) - media\mediaerror.cpp:0151: mediaetw.cpp @ 2010: 0x00000001 == S_FALSE
1546437 (3424) - media\mediaerror.cpp:0151: mediaetw.cpp @ 2010: 0x00000001 == S_FALSE
1546437 (3424) - media\mediaerror.cpp:0151: mediaetw.cpp @ 2010: 0x00000001 == S_FALSE
1546500 (3424) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
1846505 (3424) - winsat\watchdog.cpp:0149: Assessment watch dog triggered, canceling current assessment, setting main watch dog timer to 60.0 seconds
1846505 (3424) - winsat\main.cpp:1948: > Cancel received, waiting 10000ms for mediaex to cancel
1848190 (3424) - winsat\main.cpp:1958: > mediaex assessment succesfully canceled.
1848190 (3424) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
1848190 (3424) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DWM performance score
1848190 (3424) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
1848190 (3424) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
1848190 (3424) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
1848190 (3424) - winsat\main.cpp:2855: > Power state restored.
1848190 (3424) - winsat\main.cpp:2870: > Successfully reenabled EMD.
1848237 (3424) - winsat\main.cpp:2896: > Composition restarted
1848237 (3424) - winsat\watchdog.cpp:0311: Watch dog system shutdown
1848237 (3424) - winsat\main.cpp:4909: > exit value = 12.
Hata: En fazla s?re a??ld?, makine ?ok yava? -- s?nama durduruluyor.

This bit basically says, maximum time passed, computer too slow, test stops.

What seems to be the problem?

A: WEI test cannot be completed

What language is your OS currently using, and what was originally installed on it? Is one of the two English?

4 more replies

i need to capture image with VMWare Sata Drivers, i have created deployment share for capture but last step executing sysprep it got stopped and its giveing me following error :
Litetouch deployment failed(Err);- 21447024894 0x80070002: Test for cloneTag  in Registry to verify sysprep completed-unable to open ragistry key "HKEY_LOCAL_MACHINE\System\Setup\CloneTag" for reading
Failure(6191): Test for cloneTag in registry to verify sysperp completed.-unable to open registry key "HKEY_LOCAL_MACHINE\System\Setup\CloneTag" for reading Lite Touch Deployment failed, return code= -2147467259 0x80004005
Failed to run the action :Execute Sysprep.
Unknown Error(Error: 0000182f;Source:unknown)
The Execution of the last action: Execute Sysprep. Execution of task sequence failed.
Task Sequnce engine failed! Code: enExecutionFail
I am using Windows XP Sp3 Source OS and MDT2010.
Please suggest me any  solution..Md.Waseem

A:Litetouch deployment failed(Err);- 21447024894 0x80070002: Test for cloneTag in Registry to verify sysprep completed-unable to open ragistry key

This is a Windows 7 forum, not XP.
VMware is not a Microsoft program!  For help with VMware go to
www.vmware.comPlease remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

4 more replies

Which is the recommended location to maintain Product Regression Test Suite ? Would it be QC Test Plan or Test Lab ? (specially for applications that tend to change consistently over time which might require us to update core regression suite as well as functional test cases regularly)

More replies

Hi, Today i got two BSOD no where out of blue, my laptop was running well without any problem earlier before this issue. Then i did PC doctor test first it said advance pattern test failed, then i ram memtest86 and it showed nothing, no errors then again i ran PC doctor it shows now address test failed but not advance pattern test (see attachment), what is the problem could anyone pl tell

More replies

I remember about two months ago I was doing stress testing just to test the stability of my computer. Whenever I did a test that tested a lot of RAM, the test would fail within minutes and it would say "Execution Halted.."

Just recently I did an RMA with kingston and they sent me 2 brand new sticks of RAM which I installed. I just now got around to testing again but the test still fails within minutes - I am stumped.

Is it possible my memory controller / motherboard is bad? The RAM is brand new.

A:prime95 stress test/torture test failing within minutes even after installing new RAM

9 more replies

So I guess MBAM paid off AV-Test? I guess this is also inaccurate info and just marketing?

https://blog.malwarebytes.org/news/...ware-free-scores-100-in-av-test-removal-test/

They also recently won best repair award for 2014

http://www.av-test.org/en/test-procedures/award/av-test-award-2014/

A:Malwarebytes Anti-Malware Free scores 100% in AV-TEST removal test!

Why would the Kaspersky Removal Tool score higher than the Internet Suite package of Kaspersky ?
This is weird. I thought that if you have a technology to make a product on the side, might as well offer that same technology in a package you're offering (paid package).

10 more replies

Hi,

I recently ran a scheduled diagnostic test of my PC with the manufacturer's diagnostic software. I received two error messages and the advice to promptly replace my hard drive. The first message was Failed (Error code: WHD20-1VR) and the second was Failed (Error code: WHD16-T57). The apply to Targeted Read test and Smart Short Self Test respectively.

So I ran Chkdsk for the C: drive and received no error messages.

Which is correct and what should I do about it? The error message won't go away on the software.

Thanks for helping.

A:Question: Failed Targeted Read Test and SMART Short Self Test

CHKDSK is a very basic check that mostly checks file system and can be set to scan for bad sectors. The manufacturer's diagnostics actually check the physical drive to make sure its operating within the designed parameters and is more thorough.

You should replace the drive.

1 more replies

hineed help.....After running LSC hardware scan, both targeted read test and smart short self test failed witherror code: WHD01V00I-UL7BBJDevice: WDC WD10JPCX-24UE4T0-931.51 GBsby the way my lappy is LENOVO G50 with windows10 inbuilt.I've seen similar messages and most of them recommend for replacement... Do I really have to do that...Please help me out

More replies

Data Recovery using DRPs on test folders within test partitions

** Because of Windows OS and 3rd party programs and utilities constant cycle of deleting, copying, writing, deleting, copying, writing...
The sooner, one learns of any unwanted deletion[s], the sooner one engages any process of un-delete and/or data recovery, the better the chances of quality un-delete or recovery!
An un-delete's or data recovery's listing of "un-deleted or recovered" folders and files does not mean each and every "un-deleted or recovered" file is actually readable and/or usable. Listing results and real un-delete/recovery can vary significantly.**
[I have been using Resplendence's Undelux awhile now, and I remain surprised as to the busy-ness of Windows OS and 3rd party stuff constant cycle of delete, copy, write, delete, copy, write.]

I'm starting this thread here to gather experiences from others who have attempted and succeeded in data recovery.
This topic is not at all important or exciting -- until one needs to recover critical or important folders & files accidentally deleted or quick-formatted. I remember one poster somewhere on the 'Net indicating s/he "tried everything" with several data recovery programs -- which lead me to believe that what was displayed on the monitor did not match end-user expectations.
[The topic title reflects 11/2015 changes]

Wanting to presently being very efficient and effective with, and someday tutorialize how to u... Read more

More replies

AVLab ransomware test
October 2016

The best +++

=====================================================
Best ++
Avast Internet Security 2016
Avira Internet Security Suite
Bitdefender Antivirus Free Edition
Bitdefender Internet Security 2017
Dr. Web Space Security
ESET Smart Security 10 (BETA)
TrustPort Internet Security
=========================================================
Good +
Avast Free Antivirus 2016
AVG AntiVirus Free Edition
AVG Internet Security
Comodo Internet Security 8
Full pdf report
https://avlab.pl/sites/default/files/68files/ENG_2016_ransomware.pdf​

More replies

Hard Drive Diagnosis Test- Long Dst Test Failed on my Laptop.But my laptop is booting properly but everytime it hangs during working, I have to hard reboot it every time.I am suspecting that, bad memory sector causing the issue I have tried Seatools for DOS to repaire those sector , but my hard drive is not detecting in that tool. Failure ID- RLNG40-7KG845-XD7V6K-618703 Do I suppose to replace the hard drive or it is repairable in HP service center ????

A:Hard Drive Diagnosis Test- Long Dst Test Failed

Hallo Harshal123, this error code:RLNG40-7KG845-XD7V6K-618703Failure: 305information: Hard Disk 1 Full Test Failure If it's still in warranty I would recommend you to contact your HP support for getting the HDD replaced under warranty.List of phone number press your country: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html If out of warranty I would recommend you replace it your self it's normally not that hard but I can't tell since I can't see your P/N. But out from your S/N as I can see with that failure ID it's should be under 2nd year  warranty if im not misstaken. Br

ZincasI am an HP notebook technician.Please click ?Accept as Solution ? on the post that solves your issue to help others find the solution.Click the Thumbs Up on the left to say ?Thanks? for helping!

1 more replies

I ran the hardware test this morning and everything passed but the SMART short self test. It failed and gave me this code. WHD01V00G-BK7W0J It says to send to Lenovo but I don't know where. I also can't add my laptop to my products on my account. I keep getting a message #WL Service Busy #   What do I do?

A:Hardware test shows SMART short self test failure.

hi Smurfette,

Welcome to the Forums.

The image below is the breakdown on how the LSC error codes mean.
- Link to picture

The SMART short self-test that failed may have detected some certain sectors on the drive that are bad and predicted an imminent HDD failure so I would recommend you contact the lenovo helpdesk and report your findings as you likely need to send the unit for service.

If you're in the US, this is the number to call:

Phone Number: 1-877-4-Lenovo (1-877-453-6686)
upported Language: EnglishHours of operation: 24 hours/day 7 days/week

Support phone list

Let me know how it goes.

Regards

1 more replies

The recently released motherboard test fails the IRQ-test on my 20CD Thinpad Yoga with
Result Code:WMB010010-RK7YMG
Anybody else seeng this? Is it the test or my TP that are faulty?

Solved!
Go to Solution.

A:Lenovo Motherboard Test 4.1.1.6928 IRQ test fails ...

I edited your post to correct the model number (20CD).
I ran the same test on my 20CD system here, and I don't see the problem.
What OS are you running?

8 more replies

hi
need help.....
After running LSC hardware scan, both targeted read test and smart short self test failed with
error code: WHD01V00I-UL7BBJ
Device: WDC WD10JPCX-24UE4T0-931.51 GBs
by the way my lappy is LENOVO G50 with windows10 inbuilt.
I've seen similar messages and most of them recommend for replacement... Do I really have to do that...

Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.

A:G50 - targeted read test and smart short self test...

Hi there, Naveen-
Thank you for writing in to the Lenovo Forum - happy to have you here today.

The SMART Self-Test Unit means that the diagnostic utility failed to read some certain sectors on the drive and predicted an imminent HDD failure.

If with the test you did you are getting a SMART test or a smart short test failure then I believe you need to back up your data and be ready to replace the drive.

I recommend you contact Lenovo support and report your findings as you likely need to send the unit for service.

Update us how it goes.

Regards,

Tap that kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

1 more replies

Data Recovery using DRPs on test folders within test partitions

** Because of Windows OS and 3rd party programs and utilities constant cycle of deleting, copying, writing, deleting, copying, writing...
The sooner, one learns of any unwanted deletion[s], the sooner one engages any process of un-delete and/or data recovery, the better the chances of quality un-delete or recovery!
An un-delete's or data recovery's listing of "un-deleted or recovered" folders and files does not mean each and every "un-deleted or recovered" file is actually readable and/or usable. Listing results and real un-delete/recovery can vary significantly.**
[I have been using Resplendence's Undelux awhile now, and I remain surprised as to the busy-ness of Windows OS and 3rd party stuff constant cycle of delete, copy, write, delete, copy, write.]

I'm starting this thread here to gather experiences from others who have attempted and succeeded in data recovery.
This topic is not at all important or exciting -- until one needs to recover critical or important folders & files accidentally deleted or quick-formatted. I remember one poster somewhere on the 'Net indicating s/he "tried everything" with several data recovery programs -- which lead me to believe that what was displayed on the monitor did not match end-user expectations.
[The topic title reflects 11/2015 changes]

Wanting to presently being very efficient and effective with, and someday tutoriali... Read more

More replies

Ok, where to start. First, I've had this PC for about 4 years without any problems. I have my computer set to go to a blank screensaver after 1 min of not being used, and power off the monitor after 2 minutes of not being used.

The other week, the image on my entire computer screen would shake, and sometimes you could smell something burning. Sometimes, when the screen shaked so bad the monitor would just go blank for a few seconds, then back to what I was doing. (BTW, it has nothing to do with whatever I'm doing on the computer, the shaking screen happens regardless)

I thought it was just a problem with the monitor, until today when I actually shut my PC off after recieving Windows updates last night. When I went to turn it back on, audio came out of my speakers saying "system failed CPU test" I get all the lights on my PC tower on, the three lights on my keyboard are lit up, but my monitor's light is on stanby orange. There is no image on my screen whatsoever. When I push the power button on my monitor, it turns green for a few seconds, then shuts off, never displaying any image. My mouse has the red light coming from the bottom. When I hit the power button on my PC tower, nothing happens,

So I turn off the power strip, and tuen it back on, then hit the power on my tower, this time I get a "system failed VDA (or VGA) test" sound from my speakers. Everything else is like i said in the previous paragraph.

I'm almost positive its not... Read more

A:In Dire need of help- System failed CPU test/ VDA test

if you have more than 1 pc, try swapping video cards, the card may have gone bad.

Also you processor may have fried (unlikely)

Maybe a local PC shop can test you video card? If it isnt the card, I will go further with my advice

1 more replies

Ok, where to start. First, I've had this PC for about 4 years without any problems. I have my computer set to go to a blank screensaver after 1 min of not being used, and power off the monitor after 2 minutes of not being used.

The other week, the image on my entire computer screen would shake, and sometimes you could smell something burning. Sometimes, when the screen shaked so bad the monitor would just go blank for a few seconds, then back to what I was doing. (BTW, it has nothing to do with whatever I'm doing on the computer, the shaking screen happens regardless)

I thought it was just a problem with the monitor, until today when I actually shut my PC off after recieving Windows updates last night. When I went to turn it back on, audio came out of my speakers saying "system failed CPU test" I get all the lights on my PC tower on, the three lights on my keyboard are lit up, but my monitor's light is on stanby orange. There is no image on my screen whatsoever. When I push the power button on my monitor, it turns green for a few seconds, then shuts off, never displaying any image. My mouse has the red light coming from the bottom. When I hit the power button on my PC tower, nothing happens,

So I turn off the power strip, and tuen it back on, then hit the power on my tower, this time I get a "system failed VDA (or VGA) test" sound from my speakers. Everything else is like i said in the previous paragraph.

I'm almost positive its not... Read more

A:In Dire need of help- System failed CPU test/ VDA test

I have Windows XP home edition, fyi

1 more replies

Link: AV-TEST ? The Independent IT-Security Institute

A:AV-Test Android Test September 2015

There's not a lot of difference between the vendors, except for features, so I personally would not pay for any Android antivirus apps. A very basic app can provide decent protection against unwanted apps. I have recently installed Bitdefender Free on my smartphone, it scans when I download apps from Play Store, all without any bloatware or nag screens, as I have previously experienced in other free apps.

Again, antivirus for Android is optional.

2 more replies

hello.
i have a bit of a prob. i had a power crash in my house and my pc died from it, i changed the power suplyer and fron that day my pc is working really slow.
i dont know what part of my pc is not working like it sould. some one told me that there is some prog. that i can test my vidio card with it "3Dmark" and some prog. that i can test my memory with it but i dont know the name.
so if some 1 can help me and give me a link were i can download thoes programs it will really help me.
thanks.

A:video card test & memory test.

Try searching for it.

2 more replies

Hey I have an old Inspiron B130. Seems the battery is bad, or maybe it's just not charging, or maybe it's just not working in some other way? My question is how can I test?
I don't want to just rush out and buy a new battery without knowing if the laptop battery subsystem is working. The laptop came from a person who "claims" that the battery is actually a new one. I can't verify, so I want to see if I can test the laptop itself.
I wonder if there are wiring diagrams or something where I can just test a few of the pins. Or I wonder if the pins are testable at all without a battery plugged in?

How can I make sure the battery subsystem works before I buy a new battery?

A:Test battery and test output from laptop?

If you can't find any diagrams, just get a multitester, and with power off and pc unplugged, take out the battery and find pos / neg terminals on the computer against the chassis (unless they are labelled on the battery by chance?). Once you know which terminal is which, put the battery in the computer, let it charge (does the charge light come on? I should have asked that before). for a couple hours, unplug it and check the power. You may not see the full 11 volts (at least that's what I think the battery is on that model), but if it's charging, you should always have at least some residual power...

3 more replies

Hi Guys,

Just recently got a Powercolor HD 5850 gpu , and have ran a test on the latest Passmark performance test benchmarking software.

It seems about right on the 3d score with around 2200

But the 2d score is very low at around 320

Is this normal?

Just want to make sure everything is running right with it.

A friend has an Nvidia gtx 275 and its scores like over 900 on the 2d section!

I thought the 2 cards would be pretty much the same if not the HD 5850 being slightly better.

Proberly just me being fussy , but like I say I want to make sure all is right with it , otherwise its going back lol.

Cheers

Paul.

A:Anyone with a HD 5850 run a test on Passmark performance test?

I just ran the 64-bit version of this:
3D overall 2425.5
2D overall 369.2

**edit**
I don't think I like this benchmark. I recently installed the June DirectX redist, so I'm up to date. This thing wanted to, and did install it's own "updated" DirectX files, which I found odd. After I ran the benchmark, I played a little Bad Company 2... had my very first crash to desktop... ever.

Coincidence? Perhaps, but I uninstalled this pos and re-ran the June redist anyway.

9 more replies

Chrome on Debian Linux 64bit also gets 523, whereas my preferred Iceweasel (Firefox for Debian) only scores 446.

16 more replies

I have set up comodo firewall with help from cruelsisters review (parts 1 & 2) And decided to run comodo's leak test and comodo failed its own leak test!
Has anyone else had this problem or have i set it up wrong?

A:Comodo leak test, failed own test?

Switch to proactive, now you are in internet security (that's why).

14 more replies

Hi

I am using windows XP, Installed "Testlink" tool successfully and created a project and a testsuite in it.
When I tried to import an test case for the testsuite I am getting a popup window with the following message.

"To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier." with (Retry/Cancel) buttons

A:unable to import a file as test case in "Testlink" - Test management tool

For this I would suggest that you contact Testlink about the problem. They do have a forum for questions. This is most likely a problem with Testlink rather than XP or Firefox.

3 more replies

Hi,What is the difference between HP Advanced System Diagnostics Start-up test  vs its Run-in test?Is one faster or more thorough than the other ?  Is it better to run one or the other in different situations? Any info would be greatly appreciated.

A:Hp diagnostics: Start-up test vs Run-in test

Hi,Run-in test "Repeats the start-up test and checks for intermittent problems that the short start-up test does not detect. The test will run continuously until it is manually stopped by pressing the esc key.", http://support.hp.com/us-en/document/c01443317Bests,anthrene

9 more replies

Upgraded to Windows 10 (from Windows 7) after ignoring the constant encouragement to upgrade for quite sometime. It was fine for quite some time (weeks/months). Yesterday, after a restart, the blue tiled screen with the "Choose An Option" menu came up. You can "Test Memory", "Test System" or "Exit". The problem is that when you do any of these options, it just keeps cycling back to this "Choose An Option" screen.

I have a Dell Inspiron 570 (older machine). I've gotten it to go to the BIOS Setu Utility by pressing F2 (constantly as it cycles). I have the DVD/CD in the drive, but it seems to be disabled?

I'm stuck and would appreciate any help at all...please.

Thank you,

More replies

Avast seems to find a new malware every 20 min. I could not complete a panda activescan because the update would stall and hang at 19 %

Deckard's System Scanner v20071014.68
Run by Owner on 2008-05-30 21:04:04
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

Successfully created a Deckard's System Scanner Restore Point.

-- Last 5 Restore Point(s) --
102: 2008-05-31 01:04:12 UTC - RP583 - Deckard's System Scanner Restore Point
101: 2008-05-30 21:19:31 UTC - RP582 - Restore Operation
100: 2008-05-30 21:12:31 UTC - RP581 - Restore Operation
99: 2008-05-30 21:09:59 UTC - RP580 - Restore Operation
98: 2008-05-30 21:07:03 UTC - RP579 - Restore Operation

-- First Restore Point --
1: 2008-03-02 21:51:33 UTC - RP482 - System Checkpoint

Backed up registry hives.
Performed disk cleanup.

-- HijackThis Clone ------------------------------------------------------------

Emulating logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2008-05-30 2111
Platform: Windows XP Service Pack 3 (5.01.2600)
MSIE: Internet Explorer (7.00.6000.16640)
Boot mode: Normal

Running processes:
C:\WINDOWS\system32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe

A:I have completed the 5 steps!

Hi and welcome to TSF.

My name is Iain and I will be helping you clean your system.

You may wish to Subscribe to this thread (Thread Tools > Subscribe to this thread) so that you are notified when you receive a reply.

Please read these instructions carefully and then print out or copy this page to Notepad in order to assist you when carrying out the fix. You should not have any open browsers or live internet connections when you are following the procedures below.

Note that the fix may take several posts. Please continue to respond to my instructions until I confirm that your logs are clean. Remember that although your symptoms may vanish, this does NOT mean that your system is clean.

If there is anything you don't understand, please ask BEFORE proceeding with the fixes.

Please ensure that you follow the instructions in the order I have them listed.
Do not do anything with this yet!

Reboot
Reboot your system in Safe Mode.Restart the computer. The computer begins processing a set of instructions known as BIOS.
After hearing your computer beep once during startup, but before the Windows icon appears, press F8 (dependent on your system this may be F5 or another key)
Use the arrow key to highlight Safe Mode and press Enter.

SDBot FixRight click the SDFix.zip folder and choose Extract All,
Open the extracted folder and double click RunThis.bat to start the ... Read more

7 more replies

Desktop machine.
Windows Vista Home Prem. 32b.

The computer shut itself down a few days ago while it was copying for files.
Then, it behaved abnormally after restart.
A back to the factory status recovery was performed, but it did not complete the task.
The last part of the recovery did not run.
The recovery disks, burned right after the purchase of the machine and used before, were used and they ended the same way.
The last part of the recovery did not run.

There are 3 partitions on the HDD.
Partition 0, 20GB. hidden, keeping the recovery OS.
Partition 1. 223GB. partition C.
Partition 2. 220GB. partition D.

Question:
If partition C is formatted, can recovery OS be installed on partition C ?

Thanks.

A:Recovery can not be completed.

What's the brand name and model name and model number of that desktop?

What's the part/product number and/or service tag number and/or serial number on it?

Which country do you live in?

--------------------------------------------------------

3 more replies

I accidentally infected my computer with security toolbar 7.1. I have done the 5 steps and i did not get a log from that first scan but here is the log it gave me on the last one.

Deckard's System Scanner v20071014.68
Run by Alan Hickman on 2007-10-21 13:33:39
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

Successfully created a Deckard's System Scanner Restore Point.

-- Last 5 Restore Point(s) --
98: 2007-10-21 18:33:54 UTC - RP572 - Deckard's System Scanner Restore Point
97: 2007-10-21 10:02:26 UTC - RP571 - Software Distribution Service 3.0
96: 2007-10-21 09:56:58 UTC - RP570 - Installed Windows Defender
95: 2007-10-21 09:24:44 UTC - RP569 - Restore Operation
94: 2007-10-20 09:03:00 UTC - RP568 - System Checkpoint

-- First Restore Point --
1: 2007-08-01 05:41:11 UTC - RP475 - System Checkpoint

Backed up registry hives.
Performed disk cleanup.

Total Physical Memory: 504 MiB (512 MiB recommended).

-- HijackThis Clone ------------------------------------------------------------

Emulating logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2007-10-21 13:35:50
Platform: Windows XP Service Pack 2 (5.01.2600)
MSIE: Internet Explorer (7.00.6000.16544)
Boot mode: Normal

Running processes:
C:\WINDOWS\system32\smss.exe
C:\WINDOWS\system32\winlogon.exe

A:Completed five steps...here is the log.

Bump!

3 more replies

I did not get any replies so will try this again with updated info. Downloaded Microsoft Pocket PC 2002 October 2002 Update(EUU3) to computer but when tried to sync it to handheld got message: "Synchronization Cannot be Completed Successfully" and have not been able to sync since then. Same message and then disconnects. Have reinstalled Activesync twice..even going to older version. Have done disc cleanup and defrag. Have deleted recent programs including the EUU3. Also soft resert on handheld although problem developed in computer before could sync to there. There is no problem in connection of handheld with computer..just will not sync. Any help much appreciated as cannot download or sync any material to handheld(iPAQ3835) at all.
Thanks!!! John

A:Synchronization Cannot be Completed..

6 more replies

I have a couple of Word 7 files which can't be moved, deleted or renamed. Any attempt results in a message: This action cannot be completed as it is in use by another program. It is not in use by any program I am aware of. When I open the file, it says (Read Only) in the title bar but the properties dialogue boxes are not checked as read only. Of course, I can't save any changes to the file unless I go to 'save as' but that still leaves me with an undeletable/uneditable file. I am using Vista Ultimate. Any help would be greatly appreciated.
Joan

A:This action cannot be completed...

Unless you're particularly interested in the mechanics of why this might be happening, I'd suggest booting to safe mode (press the F8 key early during Windows startup) and moving or deleting the files from there. You probably won't have trouble deleting the files that way.

37 more replies

Hi everyone!

Ive just completed my upgrade from an MSI 745 Ulta mobo and ATI Radeon 7000 series 64meg AGP x4 graphics card to an Abit NF7-S mobo and ATI Radeon 9550 AGP x8 256meg graphics card and I gotta say, boy what a difference.

Now I have to save up my pennies to get myself a better processor, I have an AMD Athlon XP Pro 2000 and was wondering what i should replace it with?

There's a fair ammount of choice out there so i was wondering if anyone has any recomendations?

A:Just completed an upgrade

Nice speed jump!
Upgrading always starts with budjet. If you are going to keep your Mb , then simply buy the best (fastest) CPU you can afford at the time.If you are saving pennies you will probably be able to get the quickest cpu your mb can handle.

5 more replies

Deckard's System Scanner v20070804.61
Run by HP_Owner on 2007-08-05 at 16:46:07
Computer is in Normal Mode.
--------------------------------------------------------------------------------

Total Physical Memory: 504 MiB (512 MiB recommended).

-- HijackThis (run as HP_Owner.exe) --------------------------------------------

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:37:16 PM, on 8/5/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16473)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\AppCore\AppSvc32.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\hp\drivers\hplsbwatcher\lsburnwatcher.exe
C:\Program Files\Common Files\AOL\1128887343\ee\AOLSoftware.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\HP\HP Softw... Read more

A:Completed the 5 Steps

Please stay with this thread, and only post here for this problem. Do not start a new thread, otherwise it is too confusing...

Use Post Reply - left bottom corner. Thanks!!

Save it to the Desktop

Double-click combofix.exe to run the program
(Don't click on the window while the program is running, it may cause your system to stall.)

When finished, a log, ComboFix.txt, is produced.

~~~~

19 more replies

Hi,

Having successfully performed a 3 hour chkdsk by means of a downloaded microsoft program which did this automatically, the screen is left hanging and there is no option available to exit from it. I tried switching off and then on again but this just puts me back to the start of the chdsk routine which then completes again. So I'm stuck in a loop from which I can't escape !! What do you recommend ?

A:After chkdsk has completed

Hello ,

here is a shot in the dark

turn your system on & then back off

then un plug your system

them push your power button as if you wanted to start it and hold it for a count of 10

this will clear the compleat system of power and maybe reset way your system starts / you may want to reset the bios also by crossing the bios jumpers or just pulling the litheum battery from your mother board for at least 3 minutes

then try your system

you may be looking at wipeing the driver & reinstalling

have you tried to get into the recovery console useing the Windows XP cd ?

3 more replies

Finally got my gaming rig built and in perfect working order. Took me a while figure out how to put my two HDD into raid 0. One of the tech support guys at EVGA helped me out and said that HDDs have a hard time going into raid array if they have never been used, which was the case. I just installed some stuff on my two HDDs and reformatted the partition and BOOM it stopped giving me errors, LOL. Anywho here is the finished build:

Cooler Master Cosmos 1000 Silent Gaming Tower
EVGA 750i FTW Motherboard
Intel E8400 Wolfdale Processor
Xigmatek HDT-D1284 120mm Rifle CPU Cooler
MX-2 Thermal Compound
2x2GB OCZ DDR2 1066 5-5-5 18
2xEVGA 8800GTS in SLI
3xSeagate 7200.11 (2 in Raid 0, 1 backup)
Corsair 750TX Power Supply
Samsung DVD-RW w/ Lightscribe SATA
Liteon DVD-RW IDE
4 Scythe KAZE 120mm case fans (1 intake, 3 exhaust)
1 Stock Exaust Fan on HDDs

When I looked at the Case for the first time I couldn't believe how big it was, plenty of room to work in. The Scythe fans sound like a tornado when I first turn on the computer but it gets quite once the bios and PSU start regulating them and you can't notice it when playing games or listening to music. I bought a generic filter for the intake fan and realized that it wasn't needed because the case already comes with filters that you just slide off and wash.

This was my first build ever and I must say I'm quite pleased with the results. The bios defaulted the memory at 800mhz 1.9v so I bump... Read more

A:First Gaming Rig Completed

Cool. Looks like a good build.

7 more replies

hey im having problems with installing windows xp SP3 i boot to cd do the whole installation thing for step 1 and then it restarts and then im waiting for the continuation of the installation but it doesnt happen it boots to cd again without me pushing anything

A:Installation not completed

6 more replies

Here is my log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:05:14 PM, on 1/13/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Safe mode with network support

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\drwtsn32.exe
C:\WINDOWS\system32\drwtsn32.exe
C:\WINDOWS\system32\rundll32.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157
R3 - URLSearchHook: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - (no file)
F3 - REG:win.ini: load=C:\WINDOWS\system32\vtutq.exe
O4 - HKLM\..\Run: [SoundMan] SOUNDMAN.EXE
O4 - HKLM\..\Run: [ATICCC] "C:\Program Files\ATI Technologies\ATI.ACE\CLIStart.exe"
O4 - HKLM\..\Run... Read more

A:Completed 2/5 steps - please look over this and tell me what to do

Hello

I needed you to go all the way through the steps. We prefer a more comprehensive set of logs to assist in detecting any malware that may be present. As noted in the final step (Step 5) of our sticky topic (Updated!) IMPORTANT - Read This Before Posting A Log, download Deckard's System Scanner (DSS) to your Desktop.

What DSS will do:create a new System Restore point in Windows XP and Vista.
clean your Temporary Files, Downloaded Program Files, and Internet Cache Files, and also empty the Recycle Bin on all drives.
check some important areas of your system and produce a report for your analyst to review.
DSS automatically runs HijackThis for you, but it will also install and place a shortcut to HijackThis on your desktop if you do not already have HijackThis installed.

Note: You must be logged onto an account with administrator privileges.Close all applications and windows.
Double-click on dss.exe to run it, and follow the prompts.
When the scan is complete, two text files will open - main.txt <- this one will be maximized and extra.txt <-this one will be minimized
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of main.txt in your next reply.
To attach a file to a new post, simplyClick the[Manage Attachments] button under Additional Options > Attach Files on the post composition page, and
copy and paste the following into the "Upload File from your Computer"... Read more

19 more replies

Model HP 15 notebook PCProduct no. J8B82PA#ACJRam 4gbHard disk 1tb HDDProcessor Intel core i3 1.70 GHzWin does 8.1 64 bit

More replies

Good evening..i have just completed the combofix scan on my Openlabs Neko TSE. Which is my music workstation with a built in computer. Please can you review my log for further advice.? I really appreciate you for this. This workstation is the key to all my productions. I have been freaking out all night. Aloha!

A:completed combofix run

Hello,That request about NOT posting CF logs is primarily to keep people from running the program unsupervised.Please read this topic: http://www.bleepingcomputer.com/forums/t/273628/combofix-usage-questions-help-look-here/ which explains that reasoning further.Please follow the instructions in ==>This Guide<== starting at step 6.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Since you have run ComboFix, please include the ComboFix log in the new topic.If you cannot produce any of the other logs, then please create the new topic anyway, include the information that you were unable to produce the other logs and why and include the ComboFix log along with a description of your computer issues.Orange Blossom

1 more replies

Logfile of HijackThis v1.99.0
Scan saved at 16:26:28, on 08/01/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MPFSERVICE.exe
C:\WINDOWS\System32\ScsiAccess.EXE
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Trend Micro\PC-cillin 2002\Tmntsrv.exe
C:\Program Files\Trend Micro\PC-cillin 2002\PCCPFW.exe
C:\Program Files\Thomson\SpeedTouch USB\Dragdiag.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MpfTray.exe
C:\PROGRA~1\mcafee.com\agent\mcagent.exe
C:\Program Files\Trend Micro\PC-cillin 2002\pccguide.exe
C:\Program Files\Trend Micro\PC-cillin 2002\PCCClient.exe
C:\Program Files\Trend Micro\PC-cillin 2002\Pop3trap.exe
C:\WINDOWS\System32\ctfmon.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MpfAgent.exe
C:\Program Files\Kodak\Kodak EasyShare software\bin\EasyShare.exe
C:\Program Files\Ulead Systems\Ulead Photo Express 2 SE\CalCheck.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Documents and Settings\David.DAVID-91YJAB3H3\Desktop\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.wanadoo.co.uk/
R1 - HKCU\Software\Micros... Read more

More replies

Hi,

I am running Windows Xp SP3, 3 gig of Ram and am having an issue with my Gigabyte Motherboard, model number 81945P-G-RH and my BIOS version is F4.

I have recently noticed an issue on my bios post screen, when my PC is started the PC does the memory test, where it should say

Memory Test: XXXXXXX (x = amount of RAM)

all i see on my screen is

Memory T

I can not see the test being undertaken, after about 2 and a half minutes the memory test will complete at which point i can see the full words Memory Test and how much memory was tested as well as my master and slave drives listed.

I CAN NOT skip the memory test by pressing space bar or esc, i can only enter the bios via the delete button and i only enter the bios once the memory test has completed.

I can still run windows normally but i do not like that i am having to do a memory test everytime i start my PC. I would like to point out while in XP, the same amount of RAM shown when the test completes is consistant with what is shown in the "My Computer" properties.

I have tried all versions of my bios but still it is doing the memory test. I would appreciate any help in getting this fixed. I have not been able to find away to disable the memory test in the BIOS.

I hope you get back to me at your earliest convenience, thanks.

A:Solved: Bios Memory Test Not Displayed - Cannot Kill Memory Test

16 more replies

hi there,
plese consider that who's writing (me) is a sw/hw total illiterate..

months ago i downloaded a .exe (then uninstalled) to upload videos on youtube and from that time:

- at every web connection (firefox), the start page is http://istart.webssearches.com + the last web page visited at previous connection (two windows). i set up new homepage but nothing changes.
- pop ups frequently open (then disabled via settings).
- mouse stops/blocks for a second while using it.

i downloaded combofix and let it run. everything seems worked correctly, but now i don't know how to proceed.
here below the log i got - integral copy&paste - now saved on desktop.
if i understood well, malware etc will be removed once combofix is uninstalled and i still have to uninstall it..

i hope you can help me about how to proceed.

thanks++
iggy

ComboFix 14-05-19.01 - user 19/05/2014  19.13.03.1.1 - x86
Microsoft Windows XP Home Edition  5.1.2600.3.1252.39.1040.18.1919.1432 [GMT 2:00]
Eseguito da: c:\documents and settings\user\Desktop\ComboFix.exe
AV: avast! Antivirus *Enabled/Updated* {7591DB91-41F0-48A3-B128-1A293FD8233D}
.
.
(((((((((((((((((((((((((((((((((((((   Altre eliminazioni   )))))))))))))))))))))))))))))))))))))))))))))))))))
.
.
c:\documents and settings\All Users\Dati applicazioni\kp_0loor.pad
c:\documents and settings\user\Dati applicazioni\cacaoweb
c:\documents and settings\user\Dati applicazion... Read more

A:ComboFix ran&completed - don't know how to proceed

3 more replies

I apologize if this forum is meant for tech people as I'm a novice computer user, but I really need help.  I have Windows 7 x64 and I used RoboCopy for the first time, and have messed up royally.  I was trying to copy folders and files from my
computer to an external hard drive.  My external hard drive had important files and folders on it already, and I thought that copying more data using RoboCopy would just add to it, but it deleted everything that was on the external hard drive when it
copied the additional data.
Can I undo what just happened?  Is there any way to revert?  Or maybe there's some way to recover that deleted data?
I used:  Robocopy C:\Users\Name\Documents F:/MIR /dcopy:T
I would be really grateful to be helped.  Thanks in advance.

More replies

Hi, I just built a new computer, and it's running XP Pro 64-bit. It ran fine for the first week, but now I'm getting a problem everytime I open "My Computer". Instead of showing my drives, it does the search animation. After a minute or two, it will either find all the drives, or it will say something like "This operation could not be completed because (something) is being used by another program." and gives me two options: "Retry", or "Switch To". When I click "Switch To" it opens my "Start" menu.

A (possibly) related problem is when I open IE, I get shown a set-up menu, but when I click "Save Changes" the webpage hangs. I can bypass this and use the internet fine though. Also, my computer randomly hangs sometimes when playing games.

I'm pretty disappointed with all these errors on what was supposed to be my fresh computer... Any help is appreciated.

More replies

I'll give some background.

I have a tri-boot setup. Windows 8 one ssd, windows 7 pro on a second ssd and ubuntu 13.04 on a partition on a 2 gig raid 1. The boot partition is on the windows 7 ssd. All drives are on the same Intel controller. Prior to the 8.1 attempt it worked. I'd boot the w7 ssd and a black win7 style boot screen would appear with the 3 OS choices. I'd been using win 8 as primary since it's release with no real issues.

I updated through the store early today and the process had a hitch after the first reboot but I rebooted and it completed the install. Windows 8.1 started and walked me though an initial setup. Once in, all looked pretty much unchanged. The only issued was it asked me to reinstall some XLan software.

I rebooted to check my other OS's and the problems began. I boot up, it loaded the blue win8 boot screen with all 3 OS present when I attempted to boot ubuntu it went to a black screen with no possible input. Hard rebooting brought up the grub bootloader (not win8 bootscreen) and I was able to enter ubuntu. Same thing happened with win 7 pro. I soft rebooted and the win 8 bootscreen appeared. Choosing win 7 took me to a hung black screen - hard reboot directly started up win 7. Restarting to win 8 bootscreen again and choosing win8.1 took me to another black screen - Hard reboot from there started up a win 8 repair process.

This is always the case with each of the 3 OS's. I have found that I can get into win8 if I enter through safe mode ... Read more

A:8.1 update completed but problematic

I have the exact same problem. I even had the XLan error you described. Once I restarted the computer, it always go to a black screen. I do not have multiple OS's to boot into, but the black screen always comes up after the little blue windows 8 loading screen.

If you get your issue solved, please report back.

Update:

When I tried your suggestion of enabling Debugging, it loaded up. However, 1-2 minutes later it would freeze and I would have to push the reset button on the machine. In Safe Mode, I didn't have any of the freezing, but when I tried to uninstall Norton Internet Security, it would freeze. After a restart, I downloaded the Norton Removal Tool, and removed Norton. At this point, starting Windows 8.1 with Debugging allows me to stay freeze-free. However, trying to start up without Debugging gives me the same black screen.

Another thing to note is that when I have all non-Microsoft services stopped, I still get the black screen upon bootup. I'm not quite sure what Debugging mode does in terms of bootup, but its definitely a workaround for now. I used msconfig.exe to keep debugging turned on for now.

Again, if someone figures out the fix, report back.

2 more replies

I got my P50 a few weeks ago and yesterday its LCD went half black. OK, this happens.I turned it into authorized premium repair center and they got LCD replaced (as my P50 is under warranty). No big deal.However, they could not re-calibrate the new LCD screen because I do not run Windows on my P50 (running Kubuntu).It would not be a big deal either (the Panel Replacement Utility they have does not run on Linux, but I can live without that), however there is one worrying thing: by my request, they printed Lenove repair instructions for me where it is stated, that "Failing to run the Panel Replacement Utility program will require another LCD panel replacement". Please note "will require". My interpretation of this statement is that LCD will fail again unless I run this Panel Replacement Utility which requires Windows (not Linux version exists). Repair guys could not comment on that in either direction.REALLY????So, despite the fact that nor P50 user guide nor warranty description limit me from using non-Windows OS, the P50 cannot be repaired to be used in full capacity unless I use Windows.Do I miss anything? Is this an official position of Lenovo on non-Windows OS use on ThinkPad P50?

More replies

Computer has a very slow startup. I cannot get rid of this Kodak Easyshare. Internet response time a bit faster, page to page.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 05:44, on 2008-03-19Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16608)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Common Files\AOL\ACS\AOLAcsd.exeC:\Program Files\Common Files\AOL\TopSpeed\2.0\aoltsmon.exeC:\Program Files\Common Files\AOL\1101823440\ee\services\safetyCore\ver210_5_2_1\aolavupd.exeC:\WINDOWS\system32\cisvc.exeC:\Program Files\Google\Common\Google Updater\GoogleUpdaterService.exeC:\WINDOWS\system32\lxczcoms.exeC:\WINDOWS\Explorer.EXEC:\Program Files\mcafee.com\personal firewall\MPFService.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\wanmpsvc.exeC:\WINDOWS\system32\fxssvc.exeC:\WINDOWS\system32\wscntfy.exeC:\WINDOWS\system32\hkcmd.exeC:\Program Files\MUSICMATCH\... Read more

A:All Steps Completed Up To Hijack

Sorry for the delay. If you are still having problems please post a brand new HijackThis log as a reply to this topic. Before posting the log, please make sure you follow all the steps found in this topic:Preparation Guide For Use Before Posting A Hijackthis LogPlease also post the problems you are having.

1 more replies

Hello,

Had the "Security Center" come up on this computer...got rid of it using the tutorials on this site, along with trying all the other suggestions for removing rootkits that may be causing the redirects. Some solutions seem to run their course, others don't. Still having issues: browser redirects, browsers stop working, MBAM errors, Start menu blank, "waiting for background programs to end" on shutdown.

So, not sure where to go from here. Help please.

.
DDS (Ver_2011-08-26.01) - NTFSAMD64
Internet Explorer: 9.0.8112.16421 BrowserJavaVersion: 1.6.0_30
Run by Chance at 6:41:48 on 2012-01-23
Microsoft Windows 7 Home Premium 6.1.7601.1.1252.1.1033.18.3895.2379 [GMT -7:00]
.
AV: Microsoft Security Essentials *Disabled/Updated* {108DAC43-C256-20B7-BB05-914135DA5160}
SP: Microsoft Security Essentials *Disabled/Updated* {ABEC4DA7-E46C-2F39-81B5-AA334E5D1BDD}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\windows\system32\wininit.exe
C:\windows\system32\lsm.exe
C:\windows\system32\svchost.exe -k DcomLaunch
C:\windows\system32\svchost.exe -k RPCSS
c:\Program Files\Microsoft Security Client\Antimalware\MsMpEng.exe
C:\windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\windows\System32\svchost.exe -k LocalSystemNetworkRestricted

A:Completed all self-help tutorials, still have rootkit

22 more replies

Hello TSF -

Recently, i have had a problem with my system restore. After i attempt a restore, the computer reboots fine and acts as if it did the restore, but when i sign it, i get a messege saying system restore incomplete, or something along those lines. I decided to check the sr.inf file, right clicked and clicked install, but it said i need a windows XP sp3 cd, and i only have the original SP2 cd, not Sp3. Also i'm not sure if that will even fix the probem, has anyone else seen this problem? any help would be greatly appreciated!

-Thank you.

More replies

Recently installed kaspersky pure 2. 0 .Getting error message that backup task has not been completed. I have read that this is a known issue. Is there a solution to correct this problem? Thanks.

A:backup task has not been completed

Welcome to Seven Forumsnancy159. As you say, this is a known issue

Quote:
5. Main known issues

The maximum size limit for Quarantine and Backup and Restore does not work.
Some application windows do not correspond to Microsoft computer management from keyboard standards.
Groups of windows cannot be closed through Windows 7 taskbar.
Application window cannot be closed through Windows 7 taskbar preview.
"A backup task has not been completed" status is displayed in the general protection status and in the Backup and Restore section when backup tasks are performed.
Protection parameters cannot be reverted to default values.
AVZ reports cannot be created under 64-bit operating systems.
In some cases, characters cannot be entered using the Virtual Keyboard in entry fields of web browsers or applications.
When in Safe Run mode, Microsoft Outlook Express (Windows Mail) email client may fail to display some email messages received from the standard Microsoft Windows environment.

Kaspersky PURE 2.0: commercial release (build 12.0.1.288)

Have you tried creating a backup task?

How to create a backup task in Kaspersky PURE 2.0?

A Guy

1 more replies

Deckard's System Scanner v20070905.67
Run by Tom Roach on 2007-10-01 10:32:34
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

Successfully created a Deckard's System Scanner Restore Point.

-- Last 5 Restore Point(s) --
104: 2007-10-01 14:32:38 UTC - RP355 - Deckard's System Scanner Restore Point
103: 2007-10-01 14:17:25 UTC - RP354 - Installed WinZip 11.1
102: 2007-09-30 07:00:16 UTC - RP353 - Software Distribution Service 3.0
101: 2007-09-29 17:11:48 UTC - RP352 - Removed Adobe? Photoshop? Album Starter Edition 3.2
100: 2007-09-29 16:55:46 UTC - RP351 - Installed Windows Internet Explorer 7.

-- First Restore Point --
1: 2007-09-24 19:33:06 UTC - RP252 - System Checkpoint

Backed up registry hives.
Performed disk cleanup.

-- HijackThis (run as Tom Roach.exe) -------------------------------------------

Unable to find log (file not found); running clone.
-- HijackThis Clone ------------------------------------------------------------

Emulating logfile of HijackThis v1.99.1
Scan saved at 2007-10-01 10:39:35
Platform: Windows XP Service Pack 2 (5.01.2600)
MSIE: Internet Explorer (7.00.6000.16512)

Running processes:
C:\WINDOWS\system32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe

A:WinAntiVirusPro - 5 steps completed

2. Double click on combofix.exe & follow the prompts.

3. When finished, it shall produce a log for you. Post that & a fresh Hijackthis log in your next reply

Note:
Do not mouseclick combofix's window whilst it's running. That may cause it to stall

13 more replies

G'day, I'm running Windows 7 Home premium on a Dell Inspiron laptop.

When I am trying to organise my music files and folders in my music Library I randomly get this error:

The action can't be completed because the folder or a file in it is open in another program.

But there can be nothing else open, no media player, (neither WMP or Media Monkey which I usually use), or any other window open at all. This is intermittent. Sometimes it works sometimes it doesn't.

For example; I just discovered that I have a Chris De Burgh folder with a couple albums in it and another folder titled Chris De Burgh - Greatest Hits. I decided to move the latter into the former and rename the latter to simply Greatest Hits. At first it wouldn't copy into the Chris de Burgh folder at all and the dreaded error came up. I clicked on another folder, went back and tried again and it worked. After putting the CDB-GH folder into the CDB one I tried to rename it, (without opening it). The action can't be completed blah blah blah. Retry doesn't work. This time I had to close windows explorer and open it again and browse to the folder and rename it.

Sometimes it works first go, sometimes you have to click elsewhere then come back to it, sometimes you have to close explorer, sometimes it simply refuses until I restart the pooter. I've tried deleting everything in the temp folder, (%temp%) but there are files in here which won't delete either coming up with the same message. I guarantee that the f... Read more

More replies

A neighbor brought over his computer since he knows I help folks with infections.  It appears he already ran and removed infections found with SAS Portable and MBAM.  I can include those logs if you like so let me know.

DDS Log

DDS (Ver_2012-11-20.01) - NTFS_x86
Internet Explorer: 8.0.6001.18702  BrowserJavaVersion: 10.25.2
Run by HP_Administrator at 12:32:46 on 2013-08-16
Microsoft Windows XP Professional  5.1.2600.3.1252.1.1033.18.958.456 [GMT -4:00]
.
AV: avast! Antivirus *Enabled/Updated* {7591DB91-41F0-48A3-B128-1A293FD8233D}
.
============== Running Processes ================
.
C:\Program Files\AVAST Software\Avast\AvastSvc.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\system32\wdfmgr.exe
C:\Program Files\AVAST Software\Avast\avastUI.exe
C:\WINDOWS\System32\alg.exe
C:\WINDOWS\system32\dllhost.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\WINDOWS\system32\wbem\wmiprvse.exe
C:\WINDOWS\system32\svchost.exe -k netsvcs
C:\WINDOWS\system32\svchost.exe -k NetworkService
C:\WINDOWS\system32\svchost.exe -k LocalS... Read more

A:Infected PC with some Removal Completed

Attached file ...

3 more replies

Hi

Looking for some help resolving this issue. Computer was acting strange. Scanned with Norton 360 and Malwarebytes and found nothing. Ran TDSSkiller, found and removed a rootkit. Now, when I try to  run Combofix, it stops at Stage 48. The hard drive light is solid, so I figured it would eventually complete, but it does not.

Can you help?

thanks

drobtoy

A:stuck on 'Completed Stage_48'

Hello,Please follow the instructions in ==>This Guide<== starting at step 6. If you cannot complete a step, skip it and continue.Once the proper logs are created, then post them in a reply to this topic by using the Add Reply button.If you can produce at least some of the logs, then please create the post and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the reply and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.

19 more replies

I had a problem with my yoga 700 11". The laptop freezes every so often (3-6 hours). At first I thought it's the drivers that need to be updated, then Windows 10 updates, then BIOS update.I tried all of that but the problem still persisted. I did the recovery reset but still the same... I created Linux system on USB flash drive and booted the laptop with it. Even under Linux the laptop was freezing.I contacted lenovo support team and they said the laptop needs to be repaired and they send me the return free postage vocher. I put my laptop in the original box and posted it as I was instructed (for some reason it was send to Germany). The company name that issued me with the postage slip was MEDION AG - A Lenovo CompanyAfter 13 days I got an email saying:"...After assessing your device, the repair center has deemed that a repair cannot be completed under the manufacturer?s warranty due the case of the device showing signs of inappropriate treatment. ..." There were two pdf documents attached to the email. one with the detailed photos of the damage ( see photo attached) and the other one, the cost estimate document. In the document I was given two options:1. accept the cost of repair (£54.65)2. not accept and the laptop would be return to me (I would be still charged fat price of £44.07)My reply was that I do not recall the laptop having this damage and I always looked after it. I was suprised when I saw the photo. I also added that my main concern was that th... Read more

More replies

Dear Broni and All,

I have completed all steps, and ran the security programmes recommended in this thread:

http://www.techspot.com/community/topics/keep-getting-stupid-shopping-malware-installed.208648/

However, I am still getting pop-ups and adware related problems, which means that the underlying problem has not been resolved.
These are the programmes that I have run (today, 18/05/2015):
-RogueKiller
-Mbar
-AdwCleaner (it removed NickelBlock, AllCheeiaPPPriCe, DowwnSaave, SaVieNeewaApupoz)
-Junkware Remover
-Farbar Recovery Tool
-Farbar Security Scanner
-Security Check
-Tempfile Cleaner

I am currently running Sophos.
My laptop runs Windows 8.1, and Combofix does not support it.
The antivirus that I have is Kaspersky (I previously had Microsoft Security Essential), and Windows Defender. The malware was not detected by a Kaspersky and Spybot full scan a few days ago. However, on the 26th of April, I manually uninstalled some adware, and then ran full scans, which showed nothing.

As you can imagine, I don't think I have many options left, and formatting my laptop is a dreadful prospect. I was wondering if you could give me some advice.
I have kept all logs of the security programmes that I've run.

Thank you in advance, and looking forward to hearing from you.

A:Completed all instructions, but still getting adware pop-ups

Welcome aboard

Never follow steps from other topics. Every computer is unique.

Please, complete all steps listed here: http://www.techspot.com/vb/topic58138.html
Make sure, you PASTE all logs. If some log exceeds 50,000 characters post limit, split it between couple of replies.
Attached logs won't be reviewed.

Please, observe following rules:

Read all of my instructions very carefully. Your mistakes during cleaning process may have very serious consequences, like unbootable computer.
If you're stuck, or you're not sure about certain step, always ask before doing anything else.
Please refrain from running any tools, fixes or applying any changes to your computer other than those I suggest.
Never run more than one scan at a time.
Keep updating me regarding your computer behavior, good, or bad.
The cleaning process, once started, has to be completed. Even if your computer appears to act better, it may still be infected. Once the computer is totally clean, I'll certainly let you know.
If you leave the topic without explanation in the middle of a cleaning process, you may not be eligible to receive any more help in malware removal forum.
I close my topics if you have not replied in 5 days. If you need more time, simply let me know. If I closed your topic and you need it to be reopened, simply PM me.

57 more replies

I've run CHKDSK on a couple of laptops today, and in each case, after hanging for ages around 10-11%, the laptop rebooted while my back was turned. (The process was run at boot and the internet was not connected at the time.)

Is there a way to check if the process completed and what it did?

There is a CBS log with today's date, with entries that correspond time-wise to the CHKDSK activity, but I don't understand them. At the end there are several entries like this:

Can anyone explain what this means please, and if I have a problem?

Coincidentally (or not) There are similar 'Failed to internally open....' entries in the CBS log from when I turned the laptop back on later in the morning.

A:How do I know if CHKDSK completed successfully?

Hi, check this tutorials CHKDSK - Check a Drive for Errors in Windows 8 and Check Disk (chkdsk) - Read Event Viewer Log - Windows 7 Help Forums to see if they will help you.

Good luck, werty

3 more replies

Hello and thank you for any help you may be able to give. I've gone through the five required steps before posting my logs for help.

I've run Spybot, Adaware and SuperAntiSpyware and can't seem to clear up whatever the issue is.

Following are the required log files (as well as the "extra" text file attached):

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:06:02 PM, on 1/8/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16574)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\vtsphlxp.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\netdde.exe
C:\WINDOWS\System32\HPZipm12.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wscntfy.exe
C:\Program Files\Java\jre1.6.0_03\bin\jusched.exe
C:\Program Files\ATI Technologies\ATI.ACE\cli.exe
C:\Program Files\YourWare Solutions\FreeRAM XP Pro\FreeRAM XP Pro.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Windows Media Player\WMPNSCFG.exe
C:\Program File... Read more

A:HijackThis Log - completed 5 steps

bump

anyone?

19 more replies

Hello,

This is a follow-up to my original thread here -

http://www.sevenforums.com/crashes-d...ease-help.html

I completed 1 RMA with HP and the teleplan service center guys sent me the machine back with the note - no issues found, reloaded OS. This time they loaded the OS with SATA controller as IDE as opposed to the default RAID setting that had come when I had purchased the system.

I let it run overnight hoping for the best but see the BSOD error in morning - I would really appreciate if somebody can pin point the issue so in the next RMA I can advise HP Teleplan guys about it - they seem to not spend great deal of time researching the issue but try to do a quick fix that obviously didn't work.

Appreciate all your help !

PS - my System specs -

System Manufacturer/Model Number HP Pavilion Elite HPE-210F
OS Windows 7 Home Premium 64 Bit
CPU AMD Phenom(tm) II X4 945 Processor, 3000 Mhz, 4 Core
Motherboard H-RS880-uATX (Aloe)
Memory 8 GB PC3-10600 MB/sec (message as PC3-8500)
Graphics Card ATI Radeon HD 5450
Sound Card Integrated Realtec ALC888S Audio
Monitor(s) Displays Acer? H243H
Screen Resolution 1920 x 1080
Keyboard HP USB
Mouse Microsoft Compact Optical Mouse Model: 1016
PSU Bestec 300W
Case Mid-size ATX
Hard Drives Western Digital Caviar Green WD10EADS-65M28X
Internet Speed ATT DSL 6 MBPS

A:1st RMA completed - still random BSOD

Your dumps indicate conflicts and memory corruption. Uninstall Symantec using this removal tool: Tool. Many third party security programs create conflicts with Win 7 and Norton is no exception. Norton was involved in one of the crashes. Download and install Microsoft Security Essentials. It will not cause conflicts. Make sure Windows firewall is turned on.

Uninstall or upgrade CyberLink. Its driver, 000.fcl, Fri Sep 26 09:11:22 2008, is out of date. Outdated drivers can and do cause conflicts and BSOD's.

I find another slightly out of date driver loaded on your system. Update this driver from the link provided.

Quote:
usbfilter.sys Fri Apr 03 07:39:51 2009 - AMD USB Filter Driver (likely part of the chipset drivers). http://support.amd.com/us/Pages/AMDSupportHub.aspx. Update this driver.

Follow these suggestion, reboot and let's see if your system is more stable. Post back and let us know. If you get anohter BSOD, upload it and we will go from there.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff80002804000 PsLoadedModuleList = 0xfffff80002a41e50
Debug session time: Thu Dec 16 09:41:31.624 2010 (GMT-5)
System Uptime: 0 days 8:53:11.013
...............................................................

8 more replies

hi guys,

every single time I try to rename a folder the boring message "The action can't be completed because the folder or the file is in use" appears even if apparently neither the folder or a file in it is in use.

What I have to do is: Task Manager > Explorer.exe > End Process > File > New Task > Explorer.exe and I am able to rename the folder.

It is a really boring process and I find this process really stupid. The folders I am trying to rename are full of pictures, I think it is something related to the Thumbs files.

Anybody of you have the same issue? Any possible solution?

Thanks

A:PLEASE HELP - The action can't be completed because the folder....

OpenedFilesView - View opened/locked files in your system (sharing violation issues)
What file is opened by explorer.exe in that folder?

9 more replies

Hi, I have already run Ad-aware using the required settings multiple times and removed everything I can on my own. Ad-aware could not remove iboboi.dll and I believe that is the root of my problem. But on startup that file is gone.

Here is my hijack this log, with the analyzer. Thank you in advance for the help!

===========================================================================================================================
Log was analyzed using HijackThis Analyzer - Updated on 1/7/05

***Security Programs Detected***

C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
O2 - BHO: NAV Helper - {BDF3E430-B101-42AD-A544-FADC6B084872} - C:\Program Files\Norton AntiVirus\NavShExt.dll
O3 - Toolbar: Norton AntiVirus - {42CDD1BF-3FFB-4238-8AD1-7859DF00B1D6} - C:\Program Files\Norton AntiVirus\NavShExt.dll
O4 - HKLM\..\Run: [ccApp] "C:\Program Files\Common Files\Symantec Shared\ccApp.exe"
O4 - HKLM\..\Run: [ccRegVfy] "C:\Program Files\Common Files\Symantec Shared\ccRegVfy.exe"
O23 - Service: Symantec Event Manager - Symantec Corporation - C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
O23 - Service: Symantec Password Validation Service - Symantec Corporation - C:\Program Files\Common Files\Symantec Shared\ccPwdSvc.exe
O23 - Service: Norton AntiVir... Read more

A:Urllogic Pop-ups, completed all prereqs

Let's see if these logs will show us anything:

The Temp folders should be cleaned out periodically as installation programs and hijack programs leave a lot of junk there. Download CleanUp! (Alternate Link if main link don't work) and install it. Do not run it yet.

Before doing anything, MAKE SURE that you can keep your computer on (at least until we get it fixed). This infection requires us to detect and remove it without rebooting or restarting your computer (unless the instructions say so). If you can't keep your computer on today, then I suggest that you don't get the logs yet until you are ready. With that said (when ready):

Open up HijackThis and go to Config->Misc Tools and check the first two boxes there. Now click on the Generate StartupList log button. Post that log in your next post.

Right click on this link and choose Save As...Save it to your Desktop. Make sure you have disabled any programs that may block/disable scripts (ex: Ad-Watch, TeaTimer, Norton, etc.). Double click on Silent Runners to run it. This will take a few minutes. It will create a file called Startup Programs followed by your computer name and current date. Open up that file and post all the contents here in your next post.

Download Find-qoologic. Unzip the files to your Desktop. Open the qoologic folder and run the qoologic.bat file. Wait a few minutes for it to finish. When the dos window disappears, go to your C: drive and open up the log.txt file. Copy and p... Read more

7 more replies

I recently had a virus and used HP recovery and now I don't have any sound. I originally posted this in the sound card forum and was instructed by deejay100six to go through the five steps of identifying a virus. I completed those steps and below is my Panda Scan results. I have the hijackthis results when ever you need them. I originally went through all of the basic steps to fixing the sound problem but nothing worked. Thanks again in advance.

ANALYSIS: 2008-08-16 02:24:44
PROTECTIONS: 1
MALWARE: 19
SUSPECTS: 2
;***********************************************************************************************************************************************************************************
PROTECTIONS
Description Version Active Updated
;===================================================================================================================================================================================
avast! antivirus 4.8.1229 [VPS 080815-0] 4.8.1229 Yes Yes
;===================================================================================================================================================================================
MALWARE
Id Description Type Active Severity Disinfectable Disinfected Location

A:No Sound/5 steps completed

I need some help here guys. Below is my hijackthis results.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:35:50 AM, on 8/23/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\LogiShrd\LVMVFM\LVPrcSrv.exe
C:\Program Files\Java\jre1.6.0_07\bin\jusched.exe
C:\windows\system\hpsysdrv.exe
C:\WINDOWS\system32\hkcmd.exe
C:\Program Files\HP\hpcoretech\hpcmpmgr.exe
C:\WINDOWS\System32\hphmon05.exe
C:\HP\KBD\KBD.EXE
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\AGRSMMSG.exe
C:\PROGRA~1\ALWILS~1\Avast4\ashDisp.exe
C:\WINDOWS\system32\igfxtray.exe
C:\Program Files\Common Files\LogiShrd\LComMgr\Communications_Helper.exe
C:\Program Files\Logitech\QuickCam\Quickcam.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOWS\ALCWZRD.EXE
C:\WINDOWS\ALCMTR.EXE
C:\WINDOWS\system32\agrsmsvc.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\WINDOWS\System32\gearsec.exe

4 more replies

I just started using Microsoft 2010 and in the Outlook tasks I have created recurring tasks. In the old XP version when I completed a recurring task, the completed task would move to the top of the list. Now, it just puts it below the original task. Is there a way to automatically move completed tasks to the top of the page?

More replies

I am using SQL Server 7.0.
I have databases DB1 (only current values) and DB2 (both current and old - keeps history). When I update (or insert), on DB1, a copy of the row I am working on has to be sent to DB2 using a trigger. What gets completed first? The update process on DB1 or the action started by the trigger? I am asking this because of what I found at this site:

http://msdn.microsoft.com/library/default.asp?url=/library/en-us/architec/8_ar_da_1tup.asp

…..
You can use the FOR clause to specify when a trigger is executed:
AFTER
The trigger executes after the statement that triggered it completes. If the statement fails with an error, such as a constraint violation or syntax error, the trigger is not executed. AFTER triggers cannot be specified for views, they can only be specified for tables. You can specify multiple AFTER triggers for each triggering action (INSERT, UPDATE, or DELETE). If you have multiple AFTER triggers for a table, you can use sp_settriggerorder to define which AFTER trigger fires first and which fires last. All other AFTER triggers besides the first and last fire in an undefined order which you cannot control.

AFTER is the default in SQL Server 2000. You could not specify AFTER or INSTEAD OF in SQL Server version 7.0 or earlier, all triggers in those versions operated as AFTER triggers.

…..

This statement sounds confusing?

A:Which is completed 1st? a transaction or a trigger?

Enforcing Business Rules with Triggers
Microsoft® SQL Server™ 2000 provides two primary mechanisms for enforcing business rules and data integrity: constraints and triggers. A trigger is a special type of stored procedure that automatically takes effect when the data in a specified table is modified. A trigger is invoked in response to an INSERT, UPDATE, or DELETE statement. A trigger can query other tables and can include complex Transact-SQL statements. The trigger and the statement that fires it are treated as a single transaction, which can be rolled back from within the trigger. If a severe error is detected (for example, insufficient disk space), the entire transaction automatically rolls back.
This means that the trigger completes before the transaction, you can rollback a transaction within a trigger as mentioned above so in your case the action started by the trigger completes before the update action.

2 more replies

Trying to restart will not allow me to login, keeps telling me wrong pass word, (didn't think i had setone yet)think its microsoft thats causing the problem, it says i need a removeable media, what the hell is one ofthem. i'm already on line at home.     Can anyone help me please

A:New netbook setup not completed,

Hello, Thank you for posting in the HP Support forum. Is this re. Windows login ? You can't login to Windows? If yes, I have encounter such a problem once only but was with Win 8. Anyway - if this is a new computer you can revert the software back to factory default settings. Eventually you should create a local account (not login with Microsoft account). At the end, you can always migrate the local account to Microsoft account. If this is not re. Windows login, please provide back details.

1 more replies

After the automatic update this morning my desktop shows normal - BUT NO MOUSE. A warning pops out in the lower right corner that says something about the update did not complete - Click for details, But I can't click on anything!!!

A:W10 Update not completed - No Mouse

Can you use the cursor arrows to navigate there?

2 more replies

I've ran Combofix, but need someone to look at my log file. I'm still having boxes pop up like my symantic anti-virus can't work because it is on a network resource that is unavailable. The log file is below. I would really appreciate any help I could get.Thanks,DonComboFix 10-12-09.04 - Todd 12/10/2010 16:39:31.1.1 - x86Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.511.70 [GMT -6:00]Running from: c:\documents and settings\Todd.PHILCON\Desktop\ComboFix.exeAV: Symantec AntiVirus Corporate Edition *On-access scanning disabled* (Updated) {FB06448E-52B8-493A-90F3-E43226D3305C}.((((((((((((((((((((((((((((((((((((((( Other Deletions ))))))))))))))))))))))))))))))))))))))))))))))))).c:\documents and settings\All Users\Application Data\FuhYQAtN.exec:\documents and settings\Don\Local Settings\Application Data\{127EBD9A-1C22-44C3-8173-3067BB23059B}c:\documents and settings\Don\Local Settings\Application Data\{127EBD9A-1C22-44C3-8173-3067BB23059B}\chrome.manifestc:\documents and settings\Don\Local Settings\Application Data\{127EBD9A-1C22-44C3-8173-3067BB23059B}\chrome\content\_cfg.jsc:\documents and settings\Don\Local Settings\Application Data\{127EBD9A-1C22-44C3-8173-3067BB23059B}\chrome\content\overlay.xulc:\documents and settings\Don\Local Settings\Applicat... Read more

A:Combofix completed - need help with log file

2 more replies

log listed below : DO YOU WANT THE PANDA SCAN SCAN ALSO?

had constant pop ups- they have stopped- system very slow..avast found virus in operating system-win32:agent-PSG [drp] and vtutr.dll -
trojans

I just know how to computer surf- my son goes to online school- so we really need this computer
log listed below

Deckard's System Scanner v20071014.68
Run by wpccs on 2008-02-03 18:09:34
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

System Restore is disabled; attempting to re-enable...success.

-- Last 1 Restore Point(s) --
1: 2008-02-03 23:09:39 UTC - RP1 - System Checkpoint

Backed up registry hives.
Performed disk cleanup.

Total Physical Memory: 248 MiB (512 MiB recommended).

-- HijackThis Clone ------------------------------------------------------------

Emulating logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2008-02-03 18:13:54
Platform: Windows XP Service Pack 2 (5.01.2600)
MSIE: Internet Explorer (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\system32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe

A:hijackthis log- completed 5 steps

Hi dorimom, and welcome to TSF.

Sorry for the delay in looking into your log, as we are extremely busy as you may have noticed. If you still require assistance and are not seeking help elsewhere, then please carry out my instructions.

Please subscribe to this thread so that you are notified when you receive a reply. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant Notification, then click Add Subscription.

--------------------------------------------------------------

Please download HijackThis. This program will help us determine if there are any spyware/malware on your computer. Double-click on the file you just downloaded. Click on the "Install" button. It will by default install to the directory - C:\Program Files\Trend Micro\HijackThis

Close HiJackThis

--------------------------------------------------------------

Since it has been awhile... Please run Deckard's System Scanner (dss.exe) again, and post the resulting log.

--------------------------------------------------------------

C:\Deckard\System Scanner\main.txt

5 more replies

Thanks a lot to everybody who paid attention to my problems with windows 7 installation.

Finally I went to my university and took from their a windows 7 pro dvd and everything worked perfect. I also managed to install the windows over both windows XP and 7 thanks to your advices and tutorials.
Thanks a lot once again from the not so hot now Greece

A:Installation completed with success!!!!

You're welcome! Thanks for posting back. It means a lot to those that have worked hard to help others when they come back with thanks.

2 more replies

Not sure if this is the correct forum to post this in but..

Have installed Windows 8 64bit on three computers, all similar spec (amd a8 processors and gigabyte f2 motherboards with 8gig ram.)

Windows seems to be ok in every other respect other than I am getting an error in the metro store. When trying to install any app I get the error:

I have searched the internet for this error, and although I can find similar errors, I can see no one else having the error code with the same scrambled type.

We got around the error by signing in to a microsoft account, but then we are unable to create a pin for said account (the cursor just spins).

This happens on all three computers.

Any help greatly appreciated.

A:your purchase couldn't be completed

Have you tried copying & pasting the error code in Google ?

I find that helps.

EDIT--

I Googled & found nothing.

Perhaps this phone number will help.
I've used it & got good help from Microsoft.

Microsoft Product Support Customer Phone Number | Shortest Wait | Best Support | GetHuman.com

2 more replies

The action can?t be completed because the folder or a file in it is open in another program. I suspect that my anti virus, Norton 360, is stopping me from deleting a specific folder, it happens only in one specific folder.
When I restart my computer, it takes time to the regular background tasks to "wake up", so I can delete it once the computer turns on, but then something stops me from deleting the folder. I am not sure if it is Norton 360, or another problem.
Would it be a Malware?

A:The action can’t be completed because the folder or a f...

not positive what it could be ,anything knowing computers .
to see if its Norton 360. disconnect from intern ,disable Norton360 temporally ,how to do so will be in the settings of Norton , after its disable try deleting file.

just found this in google ,how to disable Norton temporally .

Try right clicking on the 360 icon in your notification area. You should be able to disable protection features for a specified time. Remember that you are unprotected while doing this, so you should disconnect from the Internet while doing this. Remember to reset the protection when you are finished.

6 more replies

Hi I just completed my second homebuild, I installed windows 7 pro and have been running it for over two weeks now, (got it pre release from msdna for free, thats right free, gotta love being a student, as many copies of 7, vista, xp and visual studio, and tons of other cool software for nada.)

anyway:
asus m4a78-e mobo
8gb (4x2gb) ddr3 ram
amd phenom II 945 3.0ghz quad core processor.
xfx hd 4850 1gb gddr3 gpu 256 bit with 512mb onboard already
2 x 500gb hitachi deskstar hdd's
sunbeam acb9 acrylic green led pc case (12 green leds, with 5 80mm green led fans, and custom fan grills.)
19" tft
650tx corsair psu
onboard sound and networking

it works great, so far I haven't seen the cpu go over 8% you through stuff at it it gives you a blank look and shrugs, it took a virus scan, dreamweaver, word and a few web pages (chrome) at 8% for god's sake. Anyway i'm very pleased with it.

BUT it only lists one hdd in the my computer section and that is the drive that i installed windows on, I don't know if the other one is formatted or not, I would say not, the bios recognises both of them, but my computer displays only one, i have not used raid in any form. Whats the solution?

Thanks alot, bob.

A:New build completed, but second hdd not recognised by os?

you shoud try this :
On "My Computer" Icon right click it and click MANAGE, click on DIsk Management..you may find your C: drive as Disc 0. Then look if you find drives that is unallocated..if you find it, click on the on it, right click and format the drive and click ok..just wait to make a 100% and you should after that it is healthy and formatted and you should the other drives now..try this tnx

3 more replies

ok, i know i have malware on my computer. i read the 5 steps to do first....

step one-
i ran ad-aware (i have pro edition), no problems found,
aswell as spy bot s& d and cwschredder, all fine

syep two-i have norton and avg, no problems

step 3-none from that list

step 4-none from that list

step 5-can't update from windows, just get errors

here is my hijack this log:

Logfile of HijackThis v1.99.1
Scan saved at 9:57:51 AM, on 5/10/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Documents and Settings\Administrator.JBOOGY\Local Settings\Temporary Internet Files\Content.IE5\ZQQBBUH0\stng260[1].exe
C:\Program Files\a-squared\a2guard.exe
C:\WINDOWS\system32\ntvdm.exe
C:\WINDOWS\explorer.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://us.rd.yahoo.com/customize/yco...search/ie.html
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://us.rd.yahoo.com/customize/yco.../www.yahoo.com
R0 - HKLM\Software\Microsoft\Inte... Read more

A:ok, difinitely need help. i have completed the five steps

Hi,

Quote:

If you are seeking help for spyware/antivirus issues, or wish to have your Hijack This log checked, please do not post here!

Post it at the HijackThis Log Help section. I think I mod will move this post.

5 more replies

I am really liking the expanded "notifications" section of Windows 10. Is there anything out there that allows for you to get OS operation notification E.G. File copy completed notification, and so on. It looks like right now it is only based on if the installed app supports it. I do a ton of file copying and moving and it would be nice to get it popping up and dinging saying it has completed.

More replies

Hi All,

I am in the process of repairing a clients Win7 Home Premium SP1 PC, initial complaint "PC hangs on windows boot screen". After confirming not boot I was able to boot to safe mode and reviewed the error logs. With nothing jumping out immediately as a problem I began to suspect malware and began a run of malwarebytes which hung halfway through requiring a hard reboot.

Following hard reboot it would now not boot at all. Running a pre-startup drive scan found a faulty data HDD, removed and was able to boot only to "last known good config". Once booted I noticed three separate AV's installed and removed the free versions and rebooted. PC still was chugging along and look at running processes revealed Bit Defender AV pegging CPU at 100% with nothing apparent running. Uninstalled Bit Defender and several apps that were clearly adware that had been installed.

After another reboot began a sweep with CCleaner for good measure an app popped up an installer that force installed "Free Ride Games". After several attempts was able to uninstall using Revo, however malware not clearly suspected. Thus I downloaded Combofix and began run. It has not been stuck at "Completed step_50" for about 2 hours. I can hear (and see) continue drive activity and I am unclear if i should simply let it continue or stop Combofix and try an alternate route pending input and instructs from the talented BleepingComputer Community/Folks?!

A:Combofix Stuck At "Completed Stage_50"

I would wait as you know stopping combofix can damage the machine more. if the HDD indicator is flashing its probobly still working its majic. I had one machine that hung for over an hour but never as long as two hours so that is slightly concerning. With all the issues you mentioned in your post i would probobly consider rebuilding the machine if combofix fails.

1 more replies

I have an Excel work book used to track purchase orders that are to be shipped and received. We have 4 sheets "To Be Received" "Received" To Be Shipped" "Shipped" What I want to be able to do is select an entire row and cut and paste it to the other sheet (ie. "To Be Shipped" sheet to "Shipped" sheet) I am having trouble getting it to work on active rows. Any help would be very much appreciated

A:Move a completed order from one worksheet to a second

nogdolan said:

I am having trouble getting it to work on active rows. Click to expand...

What trouble exactly? does the original row contain formulas?

1 more replies

My computer keeps getting stuck whenever I try to turn it on. It gets stuck on the page that says " Usn journal varification completed "

I can never get off this page and I haven't beed able to get on the computer in two weeks

Does anyone know how to fix it??

A:USN journal verification completed. STUCK >:(

Press F8 at bootup. In the Advanced Boot menu try Safe Mode. Then you can do a System Restore to a time before this happened. If this also fails, if you have an XP CD boot off of that and get to the Recovery Console here type chkdsk /R and press enter. Check Disk will test the integrity of the HDD and files. It may take a while.
If you don't have an XP CD on another computer, download the ISO image for Seatools in my signature. Burn the image to CD using IMGBurn also in my signature. Boot off of the newly created CD and run the quick and long test on the HDD. If either test fails, the HDD needs to be replaced.

1 more replies

During the boot, a warning message from McAfee VirusScan shows:

McAfee ActiveShield has detected a virus on your computer. We recommend that you use the Scan feature to scan all the drives of your computer for viruses.
After I press OK, no change for the stucked screen at all, but wait about 2 minutes, the above message box showing again.

Thank you in advance.

6 more replies

I am using outlook 2003 with an exchange server. I use my task list as a todo list. When I mark something as complete I see it has a strike through. The next day I come to my computer and the item that I checked of and had a strike through is gone. Does any body know where this went? I would like to keep these items as a reminder for when I fill out my timesheet.

thanx

A:Solved: outlook completed tasks

6 more replies

Outlook 2000 SP3 in Internet Mail Only mode. The user is annoyed by a windows that pops up saying "The requested tasks were completed successfully". Is there a way to turn it off in Outlook 2000?

A:The Requested Tasks Were Completed Successfully

Found this suggestion:

"Bottom right hand corner of the Send/Receive box. Click on the push pin."
Mark

1 more replies

Just wanted to add my story, similar to above.  Product# F3F15UA#ABA, 10" Pavilion notebook.  Win 10 Anniversary Edition update will not install. Machine gets to 32% and then locks up completely; grey blank screen. Have to unplug and remove battery to shut down.   After powering back, automaticaly recovered to previous version of Win 10 (1511).  Machine now almost unusable since it spends all day re-downloading the update files and then doing an automatic update reboot every evening. This has happened 4 times already; now keeping it in airplane mode.  Was on MS Assure service for hours.  2nd  tier guy said to just wait for MS to come out with a revised version of the update. Tried installing MS registry update fix (MSI) issued 10/5, but did not fix the problem. I have a completely clean machine, all drivers up-to-date, nothing installed except Office 365 and 7-Zip.  Installed Win 10 1511 as a complete replacement (OS and all apps) a few months ago and performance improved tremendously.  Except for this update problem, after the OS replacement PC works very well (for a slow, under-memory PC).  I mainly use it to take to meetings to give PowerPoint presentations, for which it works just fine.  I never do email with it or download apps. Above reply suggests updating from a USB after a image backup.  Can try that to see if I get a better result, but wonder if it would be better to skip "update" and, i... Read more

More replies

When I try to delete a few videos on my desktop it will not allow me by saying that they are use by another program. The other program has been uninstalled a little while back so I am not sure how to fix. I've checked several places and it's not on my computer any longer. How do I get this stuff deleted

A:The action can't be completed bec the folder/file is in use by another

Can you delete them after a reboot?

Can you delete them after a reboot into safe mode?

2 more replies

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 4087 Mb
Graphics Card: ATI Radeon HD 4350, 512 Mb
Hard Drives: C: Total - 305142 MB, Free - 269645 MB; E: Total - 238472 MB, Free - 151405 MB;
Motherboard: Gigabyte Technology Co., Ltd., P55-USB3, x.x,
Antivirus: None

I am new user so please forgive if I do not do this well. Problem is in excel I have my formulas entered just fine (simple, like C5*D5). however if I change valu in C5, the correct value is not displayed immediately, not until I hit save. It would be great if someone could explain this. Thanks

A:excel- have to hit save to see operations completed

1st aid:
From menu select : Tools -> Options
Select Calculation tab
It should be set to Automatic, and I suspect yours is set to Manual.

HTH

Jimmy

3 more replies

------------------------------
REGEDIT4

"{8C7461EF-2B13-11d2-BE35-3078302C2030}"="Component Categories cache daemon"

A:Smitrem And Rogue Scan Completed... Still Need Help.

1 more replies

And by completed the steps i mean i wasnt able to partially do any of the five steps

Step 1: I cant access the add/remove programs option on the control panel, it comes up with this message.

This file does not have a program associated with it for performing this action. Create an association in the folder options control panel.

Step 2: I cant use email on the computer, keeps saying cookies are disabled even though i put it to allow all.

Step 3: Well i never cleaned the system so why bother trying to install these programs? I probably wouldnt be able to install them anyway.

Step 4: When i go to the update site, it says it cant continue because one of the following programs isnt working
BITS
event log
i follow there directions, my computer refuses to allow me to enable automatic updates

Step 5: im not downloading that program because the way it looks im gonna have restore my system

so is my system completly messed up or can you guys help me out?

More replies

I ran the scan and will now try to send.

Thank You

Hello and Welcome to TSF.

Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.

------------------------------------------------------

I need to see the dds logs in order to help you.

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post/attach the logs in your next reply.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

------------------------------------------------------

2 more replies

After the installation of Avast Antivirus, something like this appeared
What do I do??

A:Avast installation didn't completed

Quote: Originally Posted by Binish Joshi

After the installation of Avast Antivirus, something like this appeared
What do I do??

1.Click on "view setup logs" and take a pic of it and upload here
3.Have you had installed any antivirus before Avast?

1 more replies

I have installed vista in safe mode when it restarted as finalization of installed then its not running. again Tried to install in safe mode. The message appeared " Windows did not completed installed, please restart . . . . I restarted , but it can not running windows, it hanged. please help me

A:Windows did not completed installation, please restart

Welcome to Vista Forums!

I must say you have me somewhat confused. I need your help clarifying the situation with more information and by answering some questions.

How exactly did you "install" Vista from safe mode? What exactly did you do (and what exactly are you trying to do and why are you trying to do it)? I don't quite understand the situation. Could you please explain in detail exactly what you are attempting, why you are attempting it, how you are attempting it, and the situation at the moment. What are you using to do the installation (a genuine Vista Installation CD, a Recovery Disk, a Recovery Partition, or what)? What method of installation are you using? What type of installation are you trying to do? Why are you trying to do it from Safe Mode (and can you get into safe mode now or are you unable to do so any longer)?

Thanks!

6 more replies

Just got this message no matter how many times I ran backup today.

I've run it every Sunday afternoon since June of 2012 and never got the message before.
edit: Backup encountered a problem while backing up file C:\Users\Joseph T. Adinolf\Contacts. ErrorThe system cannot find the file specified. (0x80070002))

Am I just wasting my time?

Using an external hard drive.

A:Backup completed but some files were skipped

Hello Joseph,

This error means that one or more folders that you selected to be included when you setup Windows Backup is no longer available to be backed up. Thus, it was skipped while backing up the others.

You can use step 4 in the tutorial below to "Change settings" in your Windows Backup to uncheck any included (checked) folders that have been deleted or moved.

Afterwards, you should stop getting this error.

Backup User and System Files

Hope this helps,
Shawn

6 more replies

Hi everyone. For the past three days I have been receiving this message that crawl could not be completed on content source <winrt://{S-1-5-21-3185794972-1365723474-11604058-1002}/>. Can someone please tell me what this mean and how to fix it.
Thank you
rcap50

More replies