Tech Problem Aggregator

Help understanding CBS.log file paths

Q: Help understanding CBS.log file paths

So I've been trying to use system file checker, and encountered a problem where it can't repair a file. I found this page detailing how to manually fix the problem:

Use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

I was fine until step 2, where it says

"For example, type takeown /f E:\windows\system32\extremely_simplified_example.dll"

The problem is, my CBS.log file says stuff like:

Cannot repair member file [l:24{12}]"FWPKCLNT.SYS"
Unable to repair \SystemRoot\WinSXS\Manifests\\[l:24{12}]"FWPKCLNT.SYS"

and I don't know how to translate that into a path to use with the takeown command. I searched for that file using explorer and found a dozen different copies, so I'm not sure which one to replace.

Semi-related questions: Can I just replace them all? I'm planning on using a copy of the file from a similar system that works, is that ok?

Thanks!

A: Help understanding CBS.log file paths

Hello Southbound, and welcome to Seven Forums.

Those instructions there are fine, but just a bit vague. OPTION THREE in the tutorial below can help give you only the SFC results to help make it easier to go through.SFC /SCANNOW Command - System File Checker
Next, the tutorial below can show you how to extract files from your installation disc to replace any listed files that SFC cannot repair.Extract Files from Windows 7 Installation DVD
Before doing anything, please post back and upload your sfcdetails.txt file to see what all may be wrong, and if it any file that cannot be repaired is worth worrying about.Screenshots and Files - Upload and Post in Seven Forums
To help interrupt what it says to know the path:Cannot repair member file [l:24{12}]"FWPKCLNT.SYS"
Unable to repair \SystemRoot\WinSXS\Manifests\\[l:24{12}]"FWPKCLNT.SYS"
The first line says that SFC cannot repair the FWPKCLNT.SYS file.

The second line is the path of the file. "SystemRoot" is a variable "%SystemRoot%" that is actually just a shortcut for "C:\Windows". This leaves you with the file path as:C:\Windows\WinSXS\Manifests\FWPKCLNT.SYS
Doing a search on the C: drive for the listed FWPKCLNT.SYS file would help give you all of it's locations if needed as well.

Hope this helps for now,
Shawn

3 more replies
Answer Match 56.7%

Hello, I know (am pretty sure >.<) that there is a way to do this.

I am trying to set a file path for a folder, but I need the folder to go to the current username, instead of my username. For example..

C:\Users\Matt\Documents\ - Is my current path

I want it to be C:\Users\*THEIR USER NAME*\Documents\

A:Help With File Paths

Hello Anyok,

You can use the path below for a universal profile path instead.

%USERPROFILE%\My Documents

Hope this helps,
Shawn

3 more replies
Answer Match 56.7%

Im new to windows 10, i upgraded from windows 7. I am beyong annoyed with the File looking for is here, there, in that folder and dont forget the folder under it lol. I sync my phone to pc for Dropbox, Files starts to sync and im seeing the same file syncing over and over like 4 times, along with the annoying windows sounds each time. I look to see where they are going and one goes to a folder
Same file here
This PC-Windows C-users Branscum-dropbox

same file went here
Network-THEBRANSCUMS201-Users-Branscum-Dropbox
and here
C-users-craig and lisa-Dropbox

i could go on but im confusing my self even more...Please i dont need all them access points for the same file ...Could some one explain this to me
 

More replies
Answer Match 56.28%

Dear All,

One of my user is facing copy paths issue in window 7 enterprise . User get the following error.




Thanks & Regards,
Kashiram Sawant

More replies
Answer Match 56.28%

I use WinAso Registry Optimizer; when I run it my computer crashes when it gets to Invalid File Paths, but when I remove the invalid file paths flag, it completes the process just fine. I would like some advice on correcting invalid file paths...thanks.
 

A:Invalid File Paths

Don't use registry cleaners. If you continue to use them, chances are that crashes will be among the least of your problems. Those things are junk, do only harm, and you should be thankful you were even able to reboot. Performance is not improved by using them, they remove needed entries, and they create their own "errors" so that they can "fix" them, making worse errors in the process.
 

3 more replies
Answer Match 56.28%

Hello,

A little background first.

I have a shortwave radio that is of a new type where a lot of the functions such as filters, etc. is done via software that resides on the PC.

The radio is mfg. by the WINRADIO company.
The model of the radio is a G31 DDC

After playing with the radio, it automatically Saves the frequencies that you have listened to, and puts them into Memory to be able to recall them later.
The file that it creates is called "User Memory"..

I seem to have the User Memory File in the right place, I think, but the "path" to get there seems to be different.

I have one path of:
Libraries/ Documents/ WINRADIO/ G31 DDC/ User Memory

And another path of:
C:/ Users/ Bob/ My Documents/ WINRADIO/ G31 DDC/ User Memory

They both seem to lead to the correct file of User Memory.

a. My main question: Is there really only one file of User Memory, but two different ways or paths to get to it ?

b. What's with Libraries; I've never set that up ? What are they ?


c. Notice that one path has My "Documents", and the other just "Documents".

If anyone could explain this for me, I would be most appreciative.

Much thanks,
Bob

A:Two Paths To The Same File Question ?

A Library doesn’t contain files, but provides a single aggregated view of multiple folders and their contents.

These links may help:

Libraries - Personal and Public User Folders

http://msdn.microsoft.com/en-us/magazine/dd861346.aspx

Windows 7 Libraries: Frequently Asked Questions

http://technet.microsoft.com/en-gb/l...33(WS.10).aspx

2 more replies
Answer Match 56.28%

after i run winaso registry cleaner/optimizer i get a messeage that i need to delte invalid files path

how do i do that ??????????

A:invalid file paths ???

Do yourself a favor, and if a registry cleaner offers to do something you don't understand, decline. It's far easier to clean the system to death than to actually fix something with a registry cleaner.

1 more replies
Answer Match 55.44%

I'm trying to figure out how to change my file path names. The system name on my computer is Tsula but all paths still say the 'Owner' thing.

Example: C:\Documents and Settings\Owner\My Documents\My Music\Enya\Enya (new age)\2005 - Amarantine

Know how to fix it? x3

A:Changing Root Name In File Paths

I think you need to create a new profile and move settings from old to new, How to copy data from a corrupted user profile to a new profile - http://support.microsoft.com/?kbid=811151 Louis

2 more replies
Answer Match 55.44%

I have a program that plays music on VB 2008 Express Edition. It accesses music from my memory stick because I'm going to need to move the program to another computer. However, the memory stick was always listed under the J:\ drive, but now randomly it's listed under the K:/ drive. Is there a way so that I can just get the music "into" the program so that it can just play the music no matter what computer it is on. P.S. I also need to get this program to run on XP, and the file path is E:\, I'm afraid that since mine changed randomly, the XP computer I'm moving it to will also change randomly.

Please Help!
 

A:File Paths Changing Randomly

You can change the drive letter by going to Administrative Tools in Control Panel and them going into Computer Management, there is a section called Disk Management which will show all connected drives, from there you can change the drive path.
 

2 more replies
Answer Match 55.44%

I've had the asian language pack installed on my laptop for awhile now and I know of a similar issue that involves the Korean won symbol, fortunately that never happened to me and I use my computer to type Korean frequently. I was attempting to get a program to run in Japanese to help out one of my friends, and after a restart; anywhere there's a file path it shows the &#65509; instead of \.

I know there's no difference aside from appearance, but it's really annoying to look at it.

I've uninstalled the program and looked around the Regional and Language options, policy settings, and about anywhere I can think of, maybe I missed it somewhere, but I can't find a way to revert it. Can anyone help? Thanks.
 

A:Yen symbol () instead of backslash in file paths.

Shameless bump.
 

2 more replies
Answer Match 55.44%

Hello everyone! New here with this problem, hope I'm entering it under the right category (if not, sorry)

I have a local and a network folder embeded in a tiddlywiki page in iframes.
They both contain folders, .doc and .xls files with both greek and english names.
I've set up the open office plugin to show the aforementioned files within browser, so the frames work as
a sort of view area (http://ubuntuforums.org/showthread.php?t=94384&page=2 ).

At the same time I need to be able to open the folders / files in their native windows environment.
The above configuration doesn't allow that as .doc and .xls links open in the open office environment by default.

A number of firefox add-ons (Open With 4.0 / https://addons.mozilla.org/en-US/firefox/addon/11097/,
IE Tab 2 / https://addons.mozilla.org/en-US/firefox/addon/92382/) provide the functionality to open firefox links in different browsers and/or programs.

I've set up explorer, winword.exe and excel.exe as manual entries in the Open With add-on which allows you to right click on firefox links and select to open them with these applications. Other add-ons allow you to do the same thing with internet explorer or a chosen application.

They all present the following problem:

The plugin works perfectly when opening the folder file:///C:/a with explorer
and the files file:///C:/a/a.doc with winword and file:///C:/a/a.xls with excel.exe.

But I get a path does not exist or is not a directory error when... Read more

More replies
Answer Match 55.02%

Hi,

When i open file dialog (saving/open files) i also get list of old path that are not existing any more.

how i can remove it ?

thanks.

A:how to remove file dialog suggested paths?

Hello Igalep,

This may be able to help. It will be the same location used for Windows Explorer.

Windows Explorer Auto Suggest - Delete Typed Paths

Hope this helps,
Shawn

1 more replies
Answer Match 55.02%

I have a bunch of music stored on Z/```music, and in a playlist. However, I wish to move the music to E/```music, but not have to go through the process of recreating a playlist

Is there a quick way to do this?

A:How to change file paths for music in WMP playlist

here's a real nifty way to move folders to a different location..
Add Copy To / Move To on Windows 7 or Vista Right-Click Menu - How-To Geek

good luck

4 more replies
Answer Match 55.02%

when i first got my computer i came up with a lofty way of partitioning my 16o gb hard drive into different sections for different purposes like media partition and a system and a possible linux/ UNIX partition. but i haven't followed my plan and my f ( 60 g's) drive is almost full and my E drive ( 50 g's ) is completely empty can i combine the drives without messing up all of my file paths? maybe if i named the new drive f it would change anything? e is completely empty though
 

A:Partitioning hard drives and file paths

Well, yes if you use a program like Partition Magic that does non-destructive partitioning you can then id the partition as F, and not have lost your paths.
 

1 more replies
Answer Match 54.6%

I guess this may be a tiny bit off the subject here, but I am attempting this in windows 7.

I have a program file manager tool called 'Directory Opus' that is capable of calling windows external programs and passing them the current directory the file manager is sitting on.

So far so good.

Now I want to call a cygwin (linux/unix emulator for windows) terminal with that file manager.

Checking properties on the cygwin Icon I got the path: C:\cygwin\bin\mintty.exe -i /Cygwin-Terminal.ico -

So it is a path to a command and an argument to that command.

Actually I guess it is 2 arguments to a command since I think '-' in that position means to feed anything on STDIN to the command. At least that would be true in unix shell programming.

So using the Directory opus setup I pass this call:
'@async:C:\cygwin\bin\mintty.exe -i /Cygwin-Terminal.ico - <and here add {s}>'

So the call ends up:
'@async:C:\cygwin\bin\mintty.exe -i /Cygwin-Terminal.ico - {s}'

That call does just what it is supposed to. It passed the current file absolute address however cygwin terminal does not understand the windows path notation. If I were passing it: C:\subdir\blah\ It would just say 'No such file' Cygwin terminal wants to see /cygdrive/c/subdir/blah Or at least I think that is what is happing.

So to cut to the chase.... I'd like to put a little wrapper to Cygwin terminal in there with the code necessary to convert 'C:\subdir\blah\' to '/cygdrive/c/subdir/blah/'

But, I do not know how ... Read more

A:Dos paths and unix paths conversion

I would ask on DonationCoder.com specifically this forum:
General Software Discussion - DonationCoder.com

The reason is I know there are a bunch of DO aficionados, who also use Linux, on that forum. I've never tried DO myself. I have played around with CygWin. But it's been a few years.

If the site wants a donation to sign up just explain to Mouser why you want to post etc.. I think he'll be sympathetic.

3 more replies
Answer Match 54.18%

I'm having an issue with Windows Media Player for Windows 7.

I imported a bunch of playlists and their associated music files from an XP machine to my new Win7 machine, and some of the music files aren't playing - Media Player simply says that there was "an error" with no further explanation given, but this error only occurs with files with a certain file path.

On my XP machine a large chunk of my music files were located in C:\Documents and Settings\[my name]\My Documents\My Music\[artist name]\[song title] as .wma files. I know that in Win7 the Documents and Settings subdirectory was replaced by Users or something - that's not the real problem, because for all my other music files, the file paths as shown in my WMP playlists will adjust themselves automatically and play the music files correctly no matter where the files are moved. My issue stems from the fact that WMP is not correcting the file paths for the files located in Documents and Settings the way it is for all the other files. There is no way to edit the file paths in WMP, or I would have tried that.

This is not the first time I've moved my XP playlists to a Win7 machine, but on my previous attempts I have had no problem simply copying all my music to one folder and playing them in WMP. So I'm not sure why it's not working this time.

I would prefer to avoid rebuilding all my playlists by hand - I really don't think that should be necessary, since as I said I've moved all my data from an XP to a W... Read more

More replies
Answer Match 54.18%

Can you supply the correct paths and file names for initiating programmes to view files in
Powerpoint
Visio
Excel

These are needed so that when a user clicks wants to view a document referenced in Q-Pulse
the system ensures the correct programme is launched. This does not happen all the time
when older files are stored with unusual extensions.
 

A:correct paths and file names for initiating programmes

nik, these could be different on anyone's PC.

If you're looking for the executable file paths, just do a find for the following files and note the folder they're stored in:

PowerPoint: powerpnt.exe
Excel: excel.exe
Visio: visio32.exe (I'm pretty sure about this one, not positive)
 

1 more replies
Answer Match 54.18%

I mistakenly deleted the contents of a user's account folder and was unable to replace the sub-folders manually or by pasting empty ones from another account. If I try to use the account to save files, I just get an error message saying that the folder xxx or file path doesn't exist, depending on where I am trying to save them. This is not just a long filename error and I am afraid that I have caused problems for the user that would affect any Windows 8 account he opens in future, because of Microsoft syncing. What do you suggest?

A:How to reset a user's deleted sub-folders/file paths?

Do you mean you've deleted the entire user folder in the root of C:\Users?

If so, just forget about it, unless you need to restore actual data. Simply create a new user after deleting the old one:

Code:
net user /delete DeletedUserNameHere


You can see the list of user names with

Code:
net user

3 more replies
Answer Match 54.18%

I have just changed from XP where I used random photos as my screensaver and I had the option to show the file path which was an effective caption. With photos going back many years it was always enjoyable as the photos brought back memories. I am now using Photos as my screensaver in Windows 7 but I can't find any way to show file path / captions. Can anybody help please?

A:How do I display file paths when using Photos as a screen saver

Welcome to Seven Forums romper. It can't be done natively in 7, but if you still have your XP PC, people report success in copying ssmypics.scr from their XP machine to the Window 7 C:\windows\System32 directory. Open the Screen Saver Settings window and select the My Pictures Slideshow option, and voil?!

A Guy

7 more replies
Answer Match 53.76%

Hi,
Is there a resource available on MS website where I can get a list of channel/files paths associated with MS Event log source types.

For instance, event logs
MS Event Log - DHCP Admin
MS Event Log - DHCP Operational
Windows 2008 Vista EventLog Failover Clustering
Have the following channels:
Microsoft-Windows-Dhcp-Client/Admin
Microsoft-Windows-Dhcp-Client/Operational
Microsoft-Windows-FailoverClustering/Operational
Thanks
Ikram

More replies
Answer Match 53.76%

Hello.

I am currently using Skydrive to synchronize files and folders between my home and office computers. I created an Excel file which has hyperlinks linking to files located under the same folder as the Excel file on the local hard disk.
In the past I was using Excel 2010 and the synching would work fine. I would open the excel file in any of the two computers and when I clicked on the hyperlinks the file stored on the local hard disk would open. Recently I purchased Office 360 and suddenly the paths in the hyperlinks linking to the files were changed from a local relative location I.e. \test.xlsx! to a cloud address I.e. http://d.docs.live.net/afodfldfad/test.xlsx. On top of that even if I click on the hyperlink the file does not open.
Also Skydrive keeps creating copies of the files at random with the name of the computer where it was modified at the end I.e. test-Home-PC.xlsx.

Anybody know the reason for this and a way around it?

Thanks.
 

More replies
Answer Match 53.76%

In C:\Documents and Settings\User I have 2 folders:

Start Menu
Favorites

The files within the Start Menu folder, as an example, have the path: C:\Documents and Settings\User\Start Menu.

If I rename the Start Menu folder to, say, xxxxStart Menu, and view path of the files in the folder again, the path remains the same C:\Documents and Settings\User\Start Menu instead of what I expected to be C:\Documents and Settings\User\xxxxStart Menu

The same applies for Favorites.

Additionally, I can leave the renamed xxxxStart Menu folder in Documents and Settings\User and create a new folder of the same name (xxxxStart Menu) and it allows me to do this--even though both names are the same!

1) Is this normal?
2) Why is this?
3) Are these some kind of "special" folders that Windows XP treats differently?
4) Why doesn't this happen for other folders like Desktop, Cookies, Local Settings, SendTo, and Application Data?

Thanks.
 

A:Xp File Paths Question, pertains to Favorites and Start Menu

Are these some kind of "special folders"Click to expand...

That is exactly what they are called. For more detailed information:http://www.answers.com/topic/special-folders. Also check out the links at the bottom of the page for more details.
moper
 

1 more replies
Answer Match 52.92%

Hello.

Got a bluescreen today, i get them like 2-3 times a week, it's the same bluescreen, but atm i dont remember what it stands.

Debugged the DMP file, posting it here so maybe you guys could find the problem:

EDIT: As you can see, some text after the error codes are in norweagian, sorry for that

Edit2: I may had like 1-2 other bluescreen that was like this: MEMORY_MANGAMENT, but i think that kinda fixed itself

Quote:




0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

NTFS_FILE_SYSTEM (24)
If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
parameters are the exception record and context record. Do a .cxr
on the 3rd parameter and then kb to obtain a more informative stack
trace.
Arguments:
Arg1: 00000000001904aa
Arg2: fffffa60056e3998
Arg3: fffffa60056e3370
Arg4: fffffa60013014f6

Debugging Details:
------------------

Page 8d7e0 not present in the dump file. Type ".hh dbgerr004" for details
PEB is paged out (Peb.Ldr = 000007ff`fffd3018). Type ".hh dbgerr001" for details
PEB is paged out (Peb.Ldr = 00... Read more

A:Help with understanding my DMP file

Hi and welcome to TSF please follow the instructions here http://www.techsupportforum.com/1871981-post2.html and attach the files to your next post use the go advanced button the the paperclip icon to attach

8 more replies
Answer Match 52.5%

Hi there all,
Please can someone help me understand what to fix in my logfile?.
My Operating system is Microsoft Windows XP, home edition, version 2002, SP.
I am using Advanced Systemcare Pro, and it has given me the attached log file.
Thanx in advance

Logfile of Advanced SystemCare 3 Security Analyzer
Scan saved at 7:55:43 p.m., on 17/08/2009
Platform: Windows XP (WinNT 5.1)
MSIE: Internet Explorer v7.0 (7.0.5730.13)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\brsvc01a.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\brss01a.exe
C:\WINDOWS\Explorer.EXE
C:\windows\system\hpsysdrv.exe
C:\Program Files\Multimedia Card Reader\shwicon2k.exe
C:\WINDOWS\system32\ctfmon.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\TUProgSt.exe
c:\program files\CometBird\CometBird.exe
C:\Program Files\IObit\Advanced SystemCare 3\Awc.exe
C:\Program Files\IObit\Advanced SystemCare 3\Sup_SmartRAM.exe
O2 - BHO: (no name) - {02478D38-C3F9-4efb-

9B51-7695ECA05670} - (no file)
O2 - BHO: (no name) - {06849E9F-C8D7-4D59-

B87D-784B7D6BE0B3} - (no file)
O2 - BHO: (no name) - {34DDBE6A-DCBE-47C7-

BF5B-30C1B4E697ED} - (no file)
O2 - BHO: BitComet ClickCapture - {39F7E362-828A-4B5A-BCAF-

5B79BFDFEA60} - C:\Program Files\BitComet\tools\BitCome... Read more

A:Understanding my log file before fixing anything

7 more replies
Answer Match 52.5%

My computer has developed a liking for BSoD.

I have tried to understand the dmp file but can't make any sense (probably because I'm thick and it doesn't say something like "your graphics card done it").

It consistantly crashes when using Photoshop and www.dell.co.uk

I can't remember when it started but I have had hardware problems (crashed out raid array, DVD failure & psu overload) and have added new items (third hard disk to raid array, DVD, psu, new processor (+1700 to +2100), one memory module (512mb pc133)). The BSoD did not occurr until after these items were added. I'm guessing that the 250W psu overheated once the new hard disk, processor & memory were added. The overheating psu damaged the DVD drive that was squeezed right on top of the psu. I can run system burn in tests for +70hours with out a fault occurring.

I have included the Dr watson log and the dump file can be found @ http://cid-85189d104fa01483.skydrive.live.com/self.aspx/Public/dump.zip

If anyone can help I would much appreciate it.
 

A:Understanding dump file

8 more replies
Answer Match 52.5%

My computer recently started getting random BSOD. I looked at the .dmp file with windows debugger and the report indicates that there is a DRIVER_FAULT. However, I can't figure out which driver. Bugcheck suggests

BugCheck 1000000A, {0, 2, 0, 804fd603}

Probably caused by : ntoskrnl.exe ( nt!ExTraceAllTables+186 )

The stack is

STACK_TEXT:
eee0eaf8 80581a60 f9047000 00001000 eee0ed24 nt!ExTraceAllTables+0x186
eee0ed40 8268decd 00000005 f9047000 00001000 nt!ExpCopyProcessInfo+0xc8
WARNING: Frame IP not in any known module. Following frames may be wrong.
eee0ed68 82675697 00000005 eee0ed84 00000000 0x8268decd
eee0edac 8057b0df 826f51f8 00000000 00000000 0x82675697
eee0eddc 804f88fa 82675649 826f51f8 00000000 nt!PspExitThread+0x2d
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x26


How do I figure out which driver is corrupt? Mimidump is attached.

Thanks!

A:Need help understanding BSOD .dmp file

This is a Windows file, which are more likely to give false positives. "Probably" means not for sure. Try this link and let us know how it goes....

http://www.computerhope.com/issues/ch000646.htm

1 more replies
Answer Match 52.5%

Ok people, I need your help once more!

I'm trying to pull some information regarding a startup stop error (blue screen). Since I haven't written down the actual stop error I was hoping that this info can be found at the dump file. The problem is that I cannot locate this file (I'm using debugging tools for windows x86 November version). It simply doesn't exists although my system is set up to create a small memory dump at the root directory.

-What shall I do in order to ensure that a dump file is created?

-Are there any other ways to pull out BSOD information without actually writing down this info myself?
 

A:Need some help understanding the XP dump file

7 more replies
Answer Match 52.08%

I was under the impression that the page file was used after you ran out of RAM. After booting up just now I ran DXDiag and it said my page file was at 300 MB even though I have 2048MB of RAM. Does this mean my RAM is already full after my PC was only up for two minutes and all I ran was Google Chrome or am I misunderstanding?
 

A:Solved: Help Understanding Page File

It is also used as replacement RAM when you run out of physical RAM, but actually its more common use is a "pitstop" between the several locations the data is moving between. Data is stored in the page file when you're presumed to be needing it in the RAM soon.
 

2 more replies
Answer Match 52.08%

##########EDIT##################

found a tool, debugwiz, that gave more info. Im attaching it as a text file.


winxp sp2 dell inspiron laptop

I started getting bsod, mostly BAD_POOL_CALLER.

i ran the dump file in windows debugging tool, and it noted that vsdatant.sys

could be the culprit. I had the previous week installed the latest Zonealarm 6, so i searched their forums. I found several BAD_POOL_CALLER posts.

So i clean uninstalled ZA6, and reinstalled zonealarm 5.5 that have been working perfect before.

Heres the problem, i still get BSOD from time to time. And the windows tool doesnt give me a nice advice like before.

The new error



it is still the pool header.

another bugcheck:


im also attaching some dump files, where Mini011406-01.dmp is the latest pool header error.

i have a norton ghost image i could use, but i would really want to know what the error is. I ran memtest and the windows mem test, but it didnt find anything in 3 hours.

Thanks for any help.
 

A:Need help understanding BSOD and the dump file.

Hello and welcome to Techspot.

1 minidump crashes at vsdatant.sys. This is your Zonealarm firewall. It is a known issue on some systems/configurations. It has a bugcheck of C2.

Uninstall, or update Zonealarm, or try using a different firewall.

2 minidumps crash at ntoskrnl.exe. This is the Microsoft Boot Up Kernel. They have bugchecks of C2, and 50 repectively.

0x000000C2: BAD_POOL_CALLER

A kernel-mode process or driver incorrectly attempted to perform memory operations. Typically, a faulty driver or buggy software causes this.

0x00000050: PAGE_FAULT_IN_NONPAGED_AREA

Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).

Go HERE and follow the instructions.

It may be that Zonealarm is causing all these crashes, but it won`t hurt to follow the above instructions.

Regards Howard :wave: :wave:
 

2 more replies
Answer Match 51.24%

Microsoft (R) Windows Debugger Version 6.3.9600.17336 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [E:\Users\Garfield\Desktop\080715-9282-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Mini Kernel Dump does not have process information
Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image Unknown_Module_00000000`00000000, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Unab... Read more

A:Need help understanding dump file and crash reason

Hiya and welcome to SevenForums!
Next time please follow the Blue Screen of Death (BSOD) Posting Instructions
But this time you analyzed it so it's okay.

It's an 0x101 which is related to overclocking. Have you overclocked?

9 more replies
Answer Match 51.24%

I am running Win XP with SP3. My start-up is slow and I have run virus and spyware tests so decided to download Event Log Explorer to see if it would identify the problem. Have just run it for the first time and it found loads of Errors and warnings. Sadly I have no idea what they mean. They refer to programmes I have never heard of and can't find on my computer. I have copied the main entries from the log file and i hope that someone here can advise.
Copy of File
Type: Error
Date: 08/10/2009
Time: 10:25:07
Event: 7000
Source: Service Control Manager
Category: None
The Acronis Scheduler2 Service service failed to start due to the following error:
The system cannot find the path specified.
Type: Error
Date: 08/10/2009
Time: 10:23:09
Event: 1002
Source: Dhcp
Category: None
Description:
The IP address lease 192.168.0.5 for the Network Card with network address 00146C5BD73F has been
denied by the DHCP server 192.168.0.1 (The DHCP Server sent a DHCPNACK message).

Type: Warning
Date: 07/10/2009
Time: 13:41:56
Event: 1009
Source: Dhcp
Category: None
Description:
A network error occurred when trying to send a message. The error code is: An operation was attempted on something that is not a socket.
.

Type: Warning
Date: 06/10/2009
Time: 22:03:54
Event: 50
Source: Ntfs
Category: None
Description:
{Delayed Write Failed}
Windows was unable to save all the data for the file . The data has been lost.
This error may be caused by a failure of your computer hardware or network conne... Read more

A:Solved: Help understanding Event log File with errors

10 more replies
Answer Match 51.24%

Hi all, I recently purchased some Verbatim 4.7 GB DVDs from Amazon.com. I've been downloading various ISOs & doing backups etc. but I've had some issues. First off, I don't really understand how Mastered/Live File System work...If you truly can use any DVD like a USB drive, what is the point of a DVD-RW? Why do they even exist? Is it just marketing?I just downloaded the Windows 10 ISO and tried extracting it to one of the DVDs (formatted with Live File System)...it seemed to work fine, but I apparently forgot to press 'Finish burning data to DVD' or something in Windows, so when I tried to boot from the disc it didn't work.When I loaded Windows, it showed 0 bytes free & no data on the disc. So, I figured I'd just redo the extraction. I loaded 7zip and selected the ISO, but when I began extracting to the disc it gave me errors such as "Cannot open file H:\*" with some filename after it. (H:\ is the DVD drive).I figured maybe some data WAS put on the DVD when I first extracted it, but possibly was corrupt due to me not finalizing the burn. I tried to format the disc, but it came back saying ~ 400 MB free. Does anyone have any idea what's going on here? Have I ruined the disc? It's not that big of a deal, they were like 20 cents each, but I don't want to waste any more. Thanks. User Info Page Biography for full specs.message edited by NT56erbx

A:Understanding DVD File Formats for burning Windows 10 ISO

You have to burn ISO files to a DVD using an appropriate program, such as ImgBurn. You can't just extract the files to a DVD and expect it to be bootable. Forget about what file system is used - it will be whatever was used to create the ISO image.Use ImgBurn - it just works.

8 more replies
Answer Match 50.82%

my web page provides me with the following (pasted with omissions):

____________________________________________________
Referrer Report
(Search Engines - Keywords - Referring URLs*) used by visitors to access the page.

Top web addresses viewed before coming to your page

http://pages.yahoo.com/nhrp
http://www.google.com/search
Unknown
http://search.yahoo.com/bin/search
http://pub59.ezboard.com
___________________________________________________
the "Unknown", this appears from time to time in the above list. i suspect the surfer was using an anonymiser. any other ideas?
 

A:Understanding where surfers were before going to one's web site(file manager stuff)

10 more replies
Answer Match 50.4%

I ran scan disc and after it says i have several corrupt files that it wasnt able to repair.  I have posted below just a few of the entries on the cbs.log.  Can someone please help me to fix these issues??
Thank you
 
Marshall
 
 
2014-10-29 12:57:02, Info                  CSI    00000090 [DIRSD OWNER WARNING] Directory [ml:520{260},l:88{44}]"\??\C:\WINDOWS\Help\Windows\IndexStore\en-US" is not owned but specifies SDDL in component Microsoft-Windows-Assistance-CollectionFiles-Help.Resources, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
 
2014-10-29 12:57:02, Info                  CSI    00000091 [DIRSD OWNER WARNING] Directory [ml:520{260},l:50{25}]"\??\C:\WINDOWS\Help\en-US" is not owned but specifies SDDL in component Microsoft-Windows-Assistance-CollectionFiles-Help.Resources, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
 
2014-10-29 12:57:02, Info                  CSI    00000092 [DIRSD OWNER WARNING] Directory [ml:520{260},l:92{46}]"\??\C:\WINDOWS\Help\Windows\ContentStore\en-US" is not owned but spe... Read more

A:Need Help understanding CBS.log file after scan-disc found corrupt files.

I dont see how 42 different  people read this post but not 1 responce.  ???
 
 

48 more replies
Answer Match 45.78%

Acer Aspire M1100 AM1100-E1402A
Mfg Date 2008\03\07
Vista Home Premium 32-bit

It was running OK, but getting a bit old and a bit slow. I upgraded to a W7 desktop, but wanted to keep this one playing around with.

Ran System Recovery 2 or 3 times using the Alt-F10 method. First time, I wanted to avoid loading bloatware so ran msconfig early on, went to Startup to uncheck Acer Launch and stuff like that. Windows Update worked until SP1. Just couldn't get SP1 to install, including when I downloaded it from the web.

Then I ran System Recovery and let the bloatware run. It stalled at 9/11. Again, Windows Update worked until SP1.

Then I tried System Recovery using discs, instead of Alt-F10. It failed for some reason. I have a couple other System Recovery discs from an laptop and an eMachine laptop. I tried them with the same result. Recovery starts, writes over the C drive, then fails.

The message is:
The system registry contains invalid file paths. Installation cannot proceed. This system image was applied without guaranteeing that drive-letter assignments would match across computers.

So now I'm stuck.

I googled the error message, but generally ended up in discussion boards that are over my head. I think I saw some discussion about partition. I have a foggy memory that this desktop may have arrived with the HDD partitioned into something like 120 and 200 GB partitions. I think I removed the partition. I wonder if this has contributed to the problem? Then... Read more

A:Vista System Recovery failure - "system registry contains invalid file paths" - canno

The vista image extracts to the temporary drive letter D.

If you use a regular installation dvd and MS standard setup.exe, it will fix the os registry letter correctly. (Defaults to the first letter i.e. C as A and B are reserved for floppies )

If you are trying to restore from a factory image, you will have trouble because there is now another os on the machine.

I have a script I use for it.

You could get it to work , but it is a lot of mucking around.

It is just easier to use a Vista install dvd ( not the same as your factory recovery image ), boot it up, and install to your desired partition.

4 more replies
Answer Match 40.74%
Q: Paths

Quote:




Sounds like your PATHS are wrong ?



This is always fun.



You need to ?locate? the nmake.exe and ensure that the path to this file eg, c:\myfiles\nmake.exe is listed in PATH




This is something someone told me i needed to do to finish compiling a program (anope IRC services)

Frankly I'm rather new to all of this and have no clue exactlly what to do

Any help would be greatly appreciated

A:Paths

This page has the full instructions for building Anope for Windows

4 more replies
Answer Match 40.32%

Hi,

I recently had to get rid of of my slave harddrive, and therefore had to reinstall a few programs:

A problem occurs when i try to setup software using setup files that worked perfectly before:

---- 1607:Unable to install InstallShield Scripting Runtime.

I check this out on net. Download the required isscript.msi, which should automatically install the required installshield again. But then i get it automatically pointing towards my old hd

---- Error 1327. Invalid Drive: G:\

Can someone please help me understand whats wrong and how to find a solution?

Cheers,

Xav

More replies
Answer Match 40.32%

http://www.mediafire.com/?hlnmttzzyrg

I am using Parallels running Windows XP.
I try opening the run.bat file from there but it appears and disappears in a second. I managed to click it like crazy and see what it says. "UNC paths are not supported." I also opened CMD and dragged the run.bat file over into it. This is that I got...

Any help would be much appreciated.
 

A:UNC paths are not supported

7 more replies
Answer Match 40.32%

Hey:

I'm trying to enter a registry value. However, the place to enter it is dimmed:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\

When I right click App Paths "New" appears and should allow me to left click on "Key". However, "Key" is dimmed so I cannot select it.

I am the admin and logged in as such. I have XP Pro SP3 installed.

How do I make "Key" available?

Thx

A:How to make xp app paths key available

Sounds like a permissions issue of some kind.

Right click App Paths then click Permissions
Administrators and System should have Full Control and Read access, Power Users should have Read and Special, and Users should have Read access. Creator Owner should have Special. These should all be greyed out, meaning they are inherited.

4 more replies
Answer Match 40.32%

I did not know which forum to post in for my problem. Sorry if this is the wrong one.


I recently tried to relocate my data folders and something went wrong. When I was done I had dble folders. This is a picture of the results.
Attachment 171583

I moved them back to it's original place. I want to be able to move them a separate partician. I know that the problem has something to do with paths being incorrect.

When I click on the start menu and on my username icon it opens up my real user folders and not Libraries. I wonder if this is a clue. I have returned the start menu customizations to default and it still opens my user folders. Can someone help me figure this out?

Thanks.

A:Need to fix folder Paths.

Hi ariel5345

Have a look at this - Start Menu User Folder Buttons - Open to Users Instead of Libraries The second set of .reg files will reset your start menu open locations.

This should help put your user folders back to their default location - User Folders - Restore Default Location

Follow this excellent tutorial to help move your user folders successfully - User Folders - Change Default Location

Post back with any questions

Danny

6 more replies
Answer Match 40.32%

http://www.mediafire.com/?hlnmttzzyrg

I am using Parallels running Windows XP.
I try opening the run.bat file from there but it appears and disappears in a second. I managed to click it like crazy and see what it says. "UNC paths are not supported." I also opened CMD and dragged the run.bat file over into it. This is that I got...

Any help would be much appreciated.
 

A:UNC paths are not supported

I've posted this on 10 sites and all I got are witty remarks. People are just dumb these days....
 

2 more replies
Answer Match 40.32%

All,

Looking for a way to add a single file to an existing .ZIP file, but need to specify the path within the existing file structure.

Example - I ZIP a directory and it's subs with all of their files. It has about 6 different subs and each of them have up to 10 subs of their own.
C:\WEBSHARE\WWWROOT\PE\SUB1\file1.asp

I need to add 1 single file and tell it that the path I want it to go to is:
C:\WEBSHARE\WWWROOT\PE\SUB1\file2.asp

BUT - the file is not coming from the same directory on the system being used to create the ZIP.

Please help.

Thanks,
Shaun
 

A:WinZip paths

6 more replies
Answer Match 40.32%

there two windows xp professionals installe dmy pc .
How can I delete the second?

A:Boot Paths

Go to Start/Run and type msconfig go to the Boot.ini tab click Check All Boot Paths

2 more replies
Answer Match 40.32%

I'm writing a batch file which calls a 32 bit .exe program. I want it to be compatible with the different Windows operating systems. The problem is that the path to "Program Files" is different depending which OS is being used. For instance:

I know the paths for these OS' since I use them:
- WinXP 32 bit: C:\Program Files\
- Vista 64 bit: C:\Program Files (x86)\

Could some kind souls please tell me what the 32bit paths are for:
- WinXP 64 bit:
- Vista 32 bit:

And for Windows 7 also would be nice:
- Win7 32 bit:
- Win7 64 bit:

Thanks!
Sky

A:Need help with paths in XP and Vista.

Environment variable - Wikipedia, the free encyclopedia

Look down in the section called "system path variable" for %ProgramFiles%.

Some other good stuff on that page as well.


Gil

6 more replies
Answer Match 40.32%

I was just wondering if there were a way to change the default cookie path in XP to another location; for example, my RamDrive...Thanks for any help! peace,
ian
 

A:XP Cookies and Paths

6 more replies
Answer Match 40.32%

Applications won't run because the paths can't be found but the files and folders all exist

More replies
Answer Match 40.32%

Is it possib to delete the shared document and libraries from my Seven ? Or will windows keep generating new ones at each boot ? Can I stop windows from doing this ? or have i have to live with this ?


PC-specs

Packard Bell Imedia
q8400
4 gb ram

etc


VV

A:Paths , Librabries ?

You need to remember that library's only point to the actual file somewhere on the network or on your own machine in the "user" files. If you need to delate something from the library you should delate the file from the actual source "my pictures" My documents" "my music".

But there is a way to make it work like you want.

Just go into Windows Media Player, choose the "organize" tab then "options" then choose the Library tab and set it to "delate files from the computer when delated from the Library. Although I believe that only works if you are delating files from Library of the machine that contains the source files.

That should allow for delating from the Library, but only from the machine that the files reside on, I don't believe it will work accross the network. It think it still works best if you delate from the file source instead of the Library.

1 more replies
Answer Match 40.32%

I am trying to show a friend how to use a used computer he purchased recently. I have done some exploring in his files and folders. My experience is limited to XP only; so some things look different to me. I found this path: C:\Users\username\AppData\Local\Temp\services.exe which seems odd. Is a temp folder where Vista would place services.exe, or does this indicate a problem?

Thanks for your replies,
welf
 

A:vista paths

6 more replies
Answer Match 39.9%

I have Windows XP Pro, sp 2.

I've encountered paths like: C:\DOCUME~1\ROYON~1\LOCALS~1\Temp. Except the tilde is higher. I don't know how to follow paths when there like this. Can someone please tell me how to interpret this path?

Thanks,

royeo
 

A:How do you interpret paths like C:\DOCUME~1\...

Hi.

This kind of path is contraction of the real folder or file names so that they are compatible with the old 8.3 DOS filename format. I don't know why it is necessary, but in (my) theory it works this way:
Long names are stripped of all spaces, even between words.
If the resulting string, without extension, is longer than 8 characters, the 6 leftmost characters are taken and an index appended, to distinguish between similar names.
So "ASDFGHJKLQWE" becomes "ASDFGH~1" while ASDFGHJKLRTZ" becomes "ASDFGH~2"

So the one you submitted translates to something like

C:\Documents and Settings\Username\Local Settings\Temp
Where username is different for each user of the computer.
 

2 more replies
Answer Match 39.9%

How would I set up Windows 8 so that I can edit the `path` environment variable in a fixed pitch font such as `Console` or `Lucida Console`? I don't want to change the font for other parts of Windows - only where paths are displayed. It seems I've been doing this in a terribly inappropriate font for many years and my tired eyes aren't great for semicolons.

A:change the font for paths

Hi Broiyan,
In windows 7 it was so easy by going to control panel, but now is much harder(you`ll see what i mean):
As Far As i know go to regedit>>>>HKEY_LOCAL_MACHINE>>>>SOFTWARE>>>>Microsoft>>>>Windows NT>>>>Current Vision>>>>FontSubstitues>>>> thats all what i know now i need an MVP like brink to hep you with here.

9 more replies
Answer Match 39.9%

On my main PC i am running Windows 7 Homepremium 64bit. My Pc is connected via ethernet cable to BT Homehub3.

I have another PC running Windows XP SP3 connected via WiFi and a laptop also Wndows XP and connected vis WiFi.

I have a Kodak C110 AiO printer connected to the home pc via USB cable.

I have tried to set up printing on the other PC and laptop and the Printer is shown in the network map, but cannot and all my efforts have now disrupted the network; viz I cannot access shared files on the Network.

On the Home PC the network is called Network 2.

I want it to be the Homegroup or Work Group but cannot seem to make this happen.

Any suggestions please?

A:How do I reset my network paths

If I take it you want to print on the main PC from the other two ? I have a similar situation and set it up giving the main PC a fixed IP and then when adding the printer to the other two I used the local port method i.e \\fixed IP address\printer share name, having initially shared the main printer - you will need to install the printer driver on the remote systems. My main PC is ethernet and all the others are wireless.

Hope this is of help.

3 more replies
Answer Match 39.9%

Hello,
 
I can´t find a solution to this problem anywhere in the Net, so maybe you guys can help me. I just did a reinstall of windows 8.1 on my desktop using the option to keep all data AND program files. The process went on very well....BUT when I restarted some programs' exe files are not found by Windows when I try to open them (Ccleaner and Office 2010 are examples) Ccleaner I uninstalled and reinstalled but the message is the same " Windows cannot find [path], make sure you typed the name correctly and then try again...." Office 2010 I ran the repair option but the message came on again, so I reinstalled it and couldn´t open it because the message came on again. I think paths got messed up somehow because those files are certainly in my hard drive. Please can you help me out?

More replies
Answer Match 39.9%

How do you get to see the full path rather than have part of it cut off?
 

A:Seeing full drive paths

Take a look here:
http://www.ehow.com/how_2073275_display-files-complete-path-windows.html
 

3 more replies
Answer Match 39.9%

Hi guys.
I've just tried to use WinMX and found that it is showing the full paths as to where files are stored on the users' HDs.

Can I turn this off? It makes it really difficult to see the file you're looking for, with all this C:\My Documents\My Music\..... crap at the front.

Thanks.

Gram
 

A:[SOLVED] WinMX paths??

Hiya

Go to the Search page. Then, look for a button that says:

Show Full Paths. Press that, and the paths should dissapear

Regards

eddie
 

3 more replies
Answer Match 39.9%

Cant run any virus scanners I get "Windows cannot access specified device, file, or path." error.... getting horrid redirects and as you can see from THIS thread in the "Am I Infected" section we have tried a lot of things. DDS (Ver_09-07-30.01) - NTFSx86 Run by Vitamin SB at 17:41:55.32 on Wed 08/12/2009Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_13Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.958.614 [GMT -5:00]FW: Norton Internet Worm Protection *disabled* {990F9400-4CEE-43EA-A83A-D013ADD8EA6E}============== Running Processes ===============C:\WINDOWS\system32\svchost -k DcomLaunchsvchost.exeC:\WINDOWS\System32\svchost.exe -k netsvcsC:\WINDOWS\system32\svchost.exe -k WudfServiceGroupsvchost.exesvchost.exeC:\WINDOWS\system32\spoolsv.exesvchost.exeC:\Program Files\Java\jre6\bin\jqs.exeC:\WINDOWS\system32\nvsvc32.exeC:\WINDOWS\Explorer.EXEC:\Program Files\Java\jre6\bin\jusched.exeC:\WINDOWS\stsystra.exeC:\Program Files\Common Files\InstallShield\UpdateService\issch.exeC:\Program Files\Dell\Media Experience\DMXLauncher.exeC:\WINDOWS\System32\DLA\DLACTRLW.EXEC:\Program Files\Dell Support\DSAgnt.exeC:\WINDOWS\system32\ctfmon.exeC:\Program Files\UnHackMe\hackmon.exeC:\Documents and Settings\Vitamin SB\Desktop\dds.exe============== Pseudo HJT Report ===============BHO: Adobe PDF Reader Link Helper: {06849e9f-c8d7-4d59-b87d-784b7d6be0b3} - c:\program files\adobe\acrobat 7.0\activex\AcroIEHelper.dllBHO: AVG Safe Search: {3ca2f312-6f6e-4b53-a66e-4e65... Read more

A:Windows cannot access paths?

Hello YouMayLose,You appear to be infected by a new very nasty Rootkit infection associated with a Rogue antivirus program. See here for more info.==========Let's begin.....Download and run Win32kDiag: Download Win32kDiag from any of the following locations and save it to your Desktop. Download Win32kDiag (Win32kDiag.exe) - #1 Download Win32kDiag (Win32kDiag.exe) - #2 Download Win32kDiag (Win32kDiag.exe) - #3 Double-click Win32kDiag.exe to run Win32kDiag and let it finish. When it states "Finished! Press any key to exit...", press any key on your keyboard to close the program. Double-click on the Win32kDiag.txt file that is located on your Desktop and post the entire contents of that log as a reply to this topic.Next......Download and run a batch file (peek.bat): Download peek.bat from the download link below and save it to your Desktop.Download peek.bat Double-click peek.bat to run it.A black Command Prompt window will appear shortly: the program is running. Once it is finished, copy and paste the entire contents of the Log.txt file it creates as a reply to this post.==========With your next post please provide:* Win32kDiag.txt* Log.txt

57 more replies
Answer Match 39.9%

When I open 3ds max I get a number of error messages for example:
The fonts path D:\Program Files\W2KPrograms\Fonts does not exist. Use configure paths to set the locatioin to a path that does exist.
[These messages also include The Import Path D:\Program Files\W2KPrograms\Meshes, The export path D:\Program Files\W2KPrograms\Meshes, The Expressions Path D:\Program Files\W2KPrograms\Express, Previews Path D:\Program Files\W2KPrograms\Previews and Video Path D:\Program Files\W2KPrograms\Videos does not exist. Use configure paths to set the locatioin to a path that does exist.]
I would dearly love to do that but I don't know how???
Can anyone help me to find out how to 'configure a path?'
Many thanks.
J. Nabney
 

A:(Solved) How to configure paths?

7 more replies
Answer Match 39.9%

Will the Windows Vista Upgrade path allow me to upgrade from 64 bit Home Premium to 32 bit Ultimate? I need to do this to use my legacy software without re-installing everything.
 

A:Vista upgrade paths

The last that I read, going from 32 to 64 required a CLEAN install. Based on that I would think that it would be the same for 64 to 32.
 

1 more replies
Answer Match 39.9%

I can ping by name or IP address, but trying to connect via
\\name or \\ipaddress fails. IP v6 has been disabled on the adapter.  The error message is: 
\\share is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  A specified logon session does not exist. 
It may have already been terminated.

Thanks for helping!

More replies
Answer Match 39.9%

From this download link: http://www.microsoft.com/downloads/d...displaylang=en
Unsupported Upgrade Scenarios


? Upgrades to Windows 7 from the following operating systems are not supported:
? Windows 95, Windows 98, Windows Millennium Edition, Windows XP, Windows Vista? RTM, Windows Vista Starter, Windows 7 M3, Windows 7 Beta, Windows 7 RC, or Windows 7 IDS
? Windows NT? Server 4.0, Windows 2000 Server, Windows Server? 2003, Windows Server 2008, or Windows Server 2008 R2
? Cross-architecture in-place upgrades (for example, x86 to x64) are not supported.
? Cross-language in-place upgrades (for example, en-us to de-de) are not supported.
? Cross-SKU upgrades (for example, Windows 7 N to Windows 7 K) are not supported.
? Upgrades from Windows Vista to Windows N, Windows K, Windows KN, or Windows E are not supported.
? Cross-build type in-place upgrades (for example, fre to chk) are not supported.
? Pre-release in-place upgrades across milestones (for example, Windows 7 RC to Windows 7 RTM) are not supported.

Supported Upgrade Scenarios



From Windows Vista (SP1, SP2)
Upgrade to Windows 7
Business
Professional, Enterprise, Ultimate
Enterprise
Enterprise
Home Basic
Home Basic, Home Premium, Ultimate
Home Premium
Home Premium, Ultimate
Ultimate
Ultimate
... Read more

A:Win7 Upgrade paths

These are "in place" upgrades.
To upgrade from XP is also possible doing a clean install.

1 more replies
Answer Match 39.9%

ok this might sound stupid but, i have a wi-fi router that also has ports for wired connections.
my laptop is usually connected to the router through the wireless medium but if i connect the wire too then what path would the packets take?
the wired or
the wireless?
 

A:priority of routing paths

10 more replies
Answer Match 39.9%

My documents are located in D:\Dropbox\MyOwnDocuments

I no longer use Dropbox; so I would like to move them all to D:\MyOwnDocuments

Problem is that I have many portable programs there, and also program files and program data for programs running from my C drive. Not to mention various other shortcuts to documents or folders in D:\Dropbox\MyOwnDocuments

Is there a quick way to check which programs / shortcuts need to be changed? Or (better) is there a way to change these paths automatically?

Thanks for any input.

A:How to change paths seamlessly?

Use subst cmd to fool things they are still in the same location Subst

1 more replies
Answer Match 39.9%

I am using Oplisker program.

Oplisker (Open Source Play List Maker) | SourceForge.net

How to create m3u file from mp3s in different folders on your computer ?


It seems to only create mp3 playlist only from mp3s in the same folder.

I was interested to create playlist from different folders with different paths
to save to one m3u file, not m3u file in each folder from the mp3s within that folder.


I know I can edit the file so it goes to different paths using notepad, but that would defeat the purpose of this program making it easier to save playlst from diferent mp3s in diffrent folders.

Thanks

More replies
Answer Match 39.9%

Hi,
We are stuck for the time being using Window Media Player to Rip/Burn/Sync music with. I've set the paths for the ripped music and library to go to a separate partition/drive, but each time the system is reset, WMP resets the paths back to c:\documents\ etc........
Should this be the way things work?
Thanks for your time,
patmac
 

A:WMP Rip and Library Paths Don't Stick

6 more replies
Answer Match 39.9%

Since a picture is worth 1000 words....



I can't figure out how to edit booloader paths.

I had the triple boot working- 7, vista, WUBI ubuntu. Then I installed Snow Leopard and tried to add it in via easyBCD.....and all hades broke loose.

Anybody know how to fix? And how to actually set OSX to boot from windows, since there's no drive letter?

A:Edit Bootloader Paths

Open an elevated command prompt in Windows 7

IMPORTANT: make a backup of your bcd file first. To do that, type:


Quote:




bcdedit /export C:\SAVEDBCD




For Vista:

Quote:




bcdedit /set {*insert here*} device partition=F:




* insert the Windows vista BCD ID, too small for me to read (take out the *'s)

ok, Vista should be working now, please test it to make sure

For Ubuntu: - optional; this will rename "nst Linux Loader" to "Wubi Ubuntu"


Quote:




bcdedit /set {*insert here*} description "Wubi Ubuntu"




* insert the "nst Linux Loader" BCD ID, too small for me to read (take out the *'s)

It is getting late, so try those, which should get Vista back on its feet, also go to the elevated cmd and type "bcdedit" please post back the results right-click the cmd prompt and select "mark" then highlight every thing, then post the results. Please copy the results, so i will be able to copy and paste

Also, what is the "EFI snow leopard" partition for???

19 more replies
Answer Match 39.9%

There are still doubts about what the possible and legal upgrade paths are for Windows 7.

Below I tried to compile some information in a way which I hope will be helpful.

Thanks to my friend Kari for his valuable contribution
Any other additions or comments are much welcome

Definitions:
1) Upgrade: to move from Windows XP or Windows Vista to Windows 7
2) Custom or Clean Install: wipes the previous installation and install Windows 7 anew. Does not preserve user files
3) In-Place Upgrade: upgrades from specific versions of Vista to specific versions of Windows 7, preserving user files and programs.
4) Upgrade version: Windows 7 license for those who own a valid license of XP or Vista
5) Full retail version: Windows 7 license to install on any PC, independent of previous installations or ownership. Can be reinstalled on other computers (when activated the previous installation is no longer valid)
6) Full OEM version :Windows 7 license to install on one PC, independent of previous installations. Can only be re-installed on same computer and hardware setup

Upgrade paths
The chart below shows in what situations one can perform an in-place upgrade (e.g. from Vista Business to Windows 7 Professional) without the need to migrate files or programs, and the situations when one needs to do a Custom (Clean) Install and replace the data in the target disc. This is the case for all Windows XP owners or Windows Vista Starter. In this case you will need to migrate your personal files ... Read more

A:Windows 7 Upgrade Paths - FAQ

Excellent!

9 more replies
Answer Match 39.9%

I was wondering what would be a good career path to follow or combine with a mcse certification. Would it be better to go the cisco way and get the ccnp or with red hat and do the rhce? I am currently in South-Africa and been around to our local job sites but it seems that demand for both are low at the moment.
 

More replies
Answer Match 39.9%

Hello! I recently upgraded my computer with an SSD for boot and main programs and use my 1TB HDD for general programs and media storage. The thing is I want it to by default install to my D:\ drive.

Now the only solution I see is editing the registry ProgramFilesDir - Which has some serious flaws. It will attempt to launch every program off of the D:\ drive even when it is stored on C:\ and about 9 out of 10 times, it still default installs to C:\.

Does anyone have a fix for this?

More replies
Answer Match 39.9%

Firstly, context: My student edition of Autodesk Maya was not working (something about the license being invalid or 'not found', and so when I searched for the error message online, a solution was to go into Environments and Paths, and replace/edit or add one for C:/Autodesk. It didn't work, and I ended up just uninstalling and reinstalling the program manually for it to work.
However, apparently I screwed around really badly in there, because now important things won't open, such as my MalwareBytes program. When I try, a window will popup and say this:
"C:\Program Files (x86)\Malwarebytes Anti-Malware\mbam.exe
The system could not find the environment option that was entered."
So, naturally, I try to find/open the Environments and Paths thing again, right? Nope. I can't open that either:
"Windows cannot find '%windir%\system32\SystemPropertiesAdvanced.exe'. Make sure you typed the name correctly, and then try again."
Even though I typed 'Environment' in my search bar to find it.
Then recently, Origin tried to install an update on my laptop, but it couldn't find the ProgramFiles, and so there was an error in installation. As a result of this, Chrome is not opening up immediately when I click it. It waits about five-six minutes after I've clicked it. I think it's what caused it, because it didn't do it before yesterday, when I tried to install the update.
So basically: how can I fix this despite knowing little to nothing about computers? How can I go into the Environments with... Read more

More replies
Answer Match 39.48%

Hi All,

I have installed RocketDock on my computer and I want use animated icons to launch just about everything I need to do. They require a direct path. I can't create a "sound" shortcut and then change it to an animated icon, as far as I know.

The path for control panel is: C:\Windows\system32\control.exe

I'm looking for the path for the "sound" menu (playback tab, specifically).

I also want the paths for:
My computer
Calculator

Thanks!

A:Direct Control Panel Paths?

::{20D04FE0-3AEA-1069-A2D8-08002B30309D}

%windir%\system32\calc.exe

Not sure how to open on playback tab, try %windir%\system32\sndvol.exe then click on the icon for system sounds for example.

Maybe it will accept this:

rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl,,0

1 more replies
Answer Match 39.48%

Hi, I was doing a clean-up and accidentally deleted all the environment variable paths. Can someone please give me a step-by-step instruction on how I can fix this issue without having to restore or enter them 1-by-1. thankyou

A:deleted Enviroment variable paths, please help.

You could try the previous restore point prior to the deletion.
Win+R->rstrui.exe

1 more replies
Answer Match 39.48%

Love 7 so far! But today I needed to access a share (\\servername\share) but when I went to type it, it came up cannot connect. We're on a domain with AD, and noticed in eventvwr that GP not processing:

The processing of Group Policy failed. Windows attempted to read the file \\internal.domain\SysVol\internal.domain\Policies\{5682A7A2-6BAE-4655-8DB6-7CAF8ECC6042}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.

Also would not map network drives. Anyways, ended up doing a system restore to a known working point in time, and that seemed to work, until I rejoined the computer to domain (since it had lost the trust relationship because of the system restore), but after a few group policies processed, and a couple critical updates were installed, it broke again. So now I unplug from the network at bootup, login, then plug network back in, and it seems to be a workaround for now, but hopefully it's only a temporary one. Anyone have any ideas?

A:Network paths (UNC \\server) broke

I would check DNS and that your clock is set to match your domain controller.

2 more replies
Answer Match 39.48%

I'm trying to set up Symantec Backup Exec 12 on Windows Server 2003. I want to be able to backup week 1 to X:\, week 2 to Y:\ and week 3 to Z:\ as Backup Exec requires each drive to maintain its own drive letter.

I have 3 Seagate Free Agent hard disks. When I try to assign each one its own drive letter, it won't maintain it. For example if I set drive 1 to X:\, the swap it out for drive 2 and assign that one to Y:\, when I plug in drive 1 it will mount as Y:\ rather than X:\ which I originally assigned it to.

Does anyone know how to get Windows to recognize that these are three separate drives and allow them to maintain their own drive letters?

Thanks.
 

A:Different removable disks assigning different paths

can you not go into diskmgmt.msc and assign the drive path you require?
 

2 more replies
Answer Match 39.48%

On my desktop-computer i have shared some folders with my home network. Then i changed their paths, as i reorganized myself. Now it seems, when I acces the network, those folders paths dont seem to be updated, as i cant access them.

I can now of course "unshare", rename and share them again, which makes them again accessible through the network, but the old "folder names" still remain. why is that, how can i correct it?

Same problem with some old "synched folders".

A:shared folder and changing their paths

Curious, where do the old 'folder names' remain? Just in the drop down menu under 'Map network drive ...'?

If so those paths are saved in your registry.

Best Wishes,
R?nce

2 more replies
Answer Match 39.48%

After a bad recovery, I couldn't get a portion of windows to work. Went to Hp and microsoft both for the problem. Hp's suggestion on the matter, was to use F8, windows advance options. and select return to os choices.

Problem was I didn't know which to choose, nor, if I was following the right procedure. Would someone answer this please. Thank you

1:D:\MiniNt
2.D:\1386
3:C:\Windows

Xp pro sp2 Media center edition
os Xp pro, ie 6 after recovery

Boot. INi

[bootloader]
timeout=3
default=multi(0)rdisk(0)partition(2)\Windows
[Operating systems]
Multi(0)rdisk(0)partition(2)\Windows="Windows XP media Center Edition"/noexecute=optin/fastdetect
C:\cmdcons\Bootsect.Dat="Microsoft Windows Recovery Console'/cmdcons

A:Boot Ini paths screwed up after recovery

What appears from the first looks,
You should choose C:\Windows.

1 more replies
Answer Match 39.48%

If I've mapped a drive through the network, I know i can disconnect it, but after that, I need to delete the path from the drop-down list. how do i do that?
 

More replies
Answer Match 39.48%

Hey Techspot,
The other computers in my network have trouble accessing certain shared folders on my main computer. I have three drives installed, C: my OS drive, and D: and B: file drives. My C: Public folder, another folder on C: and my entire D: drive have been shared for a long time, and are the only paths the other computers can access. Anything I try to share now (except stuff on the D: drive, since the entire thing is share-enabled) will return the "is not accessible. You might not have permission to use this network resource." error.
I can understand why a computer in it's entirity wouldn't be accessible across a network, but as to why certain locations wouldn't work - some on the same drive as locations that do work - I'm at a loss.
Thanks in advance!
 

A:Certain paths and folders inaccessable across network.

The edit button isn't working so:
I forgot to mention, all the computers are running Vista Home Premium or Ultimate, all on an ethernet lan with a Belkin router.
 

5 more replies
Answer Match 39.48%

I changed the user name from "user001" to "user888". That changed the name on the login/logout screens. But the user folders and paths all stayed with the old name "user001". As a result some things, like the name installed programs will grab and use, are still called "user001".

Is there a way, short of re-installing Windows, to change all the appropriate folders, paths and registry entries to read "user888" and get rid of the old user name completely?

A:Changing the User Folders (and paths)

You may want to create a new account and move the user files over to that new account. Then delete the old account.

A good explanation can be found from Brink below:
Creating a New User Account Similar to an Existing User Account

6 more replies
Answer Match 39.48%

There is an Excel App on our network that gets used by multiple users. In this app there are some VLookups that pull information from other spreadsheets. The problem we are having is that the physical paths in the VLookups are being changed to relative paths. Instead of using L:\Files\somefile.xls it changes to \\server\share\somefile.xls.

When this happens the VLookup stops working, it's odd because both paths are legetimate but only the one with the physical path works. This is happening on several different spreadsheets and the formulas have to continualy remapped.

All users are using Office 97 but the OS are mixed, Win ME, 2000 and 98. Any ideas?

Here are the Vlookups:

Before
=VLOOKUP($C18,'L:\shared files\[EmpDataLog.xls]RATE'!$B$10:$AZ$642,5)

After
=VLOOKUP($C18,'\\server01\shared files\[EmpDataLog.xls]RATE'!$B$10:$AZ$642,5)

 

A:Paths changing in VLookups (Excel)

Hi, Tal. I suspected, so I confirmed with someone else here at work, that your users have drives mapped differently and they really need to be the same.
 

3 more replies
Answer Match 39.48%

i installed vista on a spare dock drive to test it out i decided i liked it so i ordered another drive for vista to run on then i backed up my storage drive and then formated the drive from a XpPro x64 OS and reinstalled vista on its own dedicated hdd the prob is when the installer reboots and it gets back to vistas boot screen it shows 1 xp boot path and 2 vista boot paths one works and the other doesn't but in the one that dose i get all kinds of missing file and corrupt file errors any ideas?
oh and is there anyway to speed up the vista install its kinda sluggish (normal?)
thanks in advance.

AMD BE X2 5000+ 3Ghz 200x15
Asus Formula Crosshair II
8Gb Corsair Dominator 1066 running at 800 (4x2gb)
2 WD raptor 74Gb in raid 0 (XpProx64 &Games)
2 WD caviar 250Gb dock drives
WD raptor 300Gb (for vista)
2 EVGA 9800 GTX SLI
Enermax Galaxy 1Kw PSU

More replies
Answer Match 39.48%

Where are the Office programs' exe files found? I cannot find them in 2010?
I check the Office program shortcuts and they look like this:

"C:\Program Files (x86)\Common Files\microsoft shared\Virtualization Handler\CVH.EXE" "Microsoft Excel 2010 9014006204090000"

Which doesn't work when I insert that in "add" to the programs in Setpoint (Logitech's software for VX Revolution mouse)

A:Office 2010 Program Paths?

Have a look in C\Program files\Microsoft Office

9 more replies
Answer Match 39.48%

Having moved a bunch of shared printers from one server to another, I need to change the local printer paths on all workstations - is this something that can be done at a command line, and therefore scripted and placed into a batch file/login script?

I rather think it's going to have to be done with something like VBScript or WSH (about which I know nothing!) but if anyone has any ideas, I'd be pleased to hear them.

Thanks.
 

A:Lots of changed printer paths....

7 more replies
Answer Match 39.48%

When I first installed Win 7 I simply went with the default user name of "Owner". I wouldn't mind changing it now but I'm concerned about the effect on my shortcuts and so on.

If I rename it, will Windows go through and automatically update all the shortcuts and program paths and so on? My gut reaction is "Of course it will" but I've learned to be cautious with Windows! Will I end up with a lot of tidying up to do?

A:Will changing username mess up paths?

Only the username will be changed. The c:\users\<username> path does not get changed and this can lead to more confusion.

Better method:

1) Create two new accounts. One in the username you want, and one temporary...you can even call it TEMP if you like.

2) Log in as TEMP. Use Windows Easy Transfer to migrate all files and settings from your old account to the new one you just created.

3) When this is complete, log in as your new user and make sure everything is there and working.

4) Delete your old user and TEMP.

3 more replies
Answer Match 39.48%

I just ran a customized install of Office Ultimate 2007. I open Powerpoint, and tried to access the clipart library to insert a clipart image. It gives me an error saying it can't display the clipart, and tells me I have to run Setup again, and choose "Add & Remove Programs" to install the feature; but it doesn't say WHAT feature. I've done customized installs 100 times, and never had this issue. I've also got the Office12/Clipart folder on another partition from a past install. So, I was going to try and go to the Options/Paths like Office USED to have, but NOO can't go there. So, how the #$&& do I fix this issue?

GPL

A:How Do I Find & Determine Paths for Office

Go to Control Panel, Programs and Features
In the list of installed software, select Microsoft Office.
Click Change.
In the Setup box, click Add/Remove Features.
Click the Plus sign next to Office Shared Features
Click the Down arrow next to Clip Art and click Install All
Click Continue
If prompted by Setup, insert the appropriate disk

4 more replies
Answer Match 39.48%

Hi friends!

I'm experiencing a very strange bug with a custom library. On the odd occasion when I open an explorer pane and navigate to my library on the left-hand side, two of my included folders - which are both located in 'C:\Program Files\...' will change to a non-existent 'C:\Program Files (x86)\...' version of the same folder. If I click on that folder in the library pane it will tell me the folder doesn't exist.

It happens infrequently but often enough to be annoying. It's not immediately clear what causes it or why it stops. When it happened just now I closed all open explorer panes and opened a new one, and the library displayed the correct 'non x86' folder structure.

Any idea what causes this and how it can be avoided?

Thanks!

Adam

More replies
Answer Match 39.48%

Hi all,

I was hoping someone knowledgeable could clear up some confusion I have on the upgrade process. I've googled my questions and it seems there is no definitive answer and that Microsoft themselves seem to not be consistent on their treatment of upgrades.

I originally wasn't going to upgrade but at $39.99 for a Pro version, I can't resist. I am aware that you need a current install to upgrade. I was hoping that during the upgrade process I would be given an option to chose the key I wished to invalidate for the upgrade. Now, I am quite fond of my Windows 7 license and am going to keep it around in case I don't like Windows 8 and just because it is a great OS.

So my dilemma is as follows:
I have a couple full licenses for XP and Vista. I also have the OEM license of Vista Business that is on a sticker on my computer. I am resigned to the fact that I'll have to uninstall my current OS and install an old one for the upgrade and I can live with that.

I would, however, like to get rid of my most worthless license for the upgrade, which in my opinion is the one OEM one on a sticker on my laptop. So I guess the question is would the limitations of the OEM license, which is that it is only valid for that specific machine be attached to the upgraded version. As the Pro upgrade is for a limited time only, I imagine any future computer I will buy will have the Home version with it and I would like to preserve my access to the Pro version as well as to have the option to have a... Read more

A:Upgrade paths and future limitations

Hello jaebberwock. Welcome to the Eight Forums.

You mentioned "in case I don't like Windows 8" so I guess you haven't used it yet.
Based on that assumption, I would suggest downloading Windows 8 Enterprise Evaluation for free. (good for 90 days) Burn it to a dvd. Do you know anything about imaging? Do you have any external drives? I would consider learning a little about external drives so that you could make some images? Are you on a budget? Can you afford to spend a few bucks on imaging software? Search online for imaging software. You could image your XP system without affecting it by an upgrade. Same with Vista or Windows 7. Image what you want to save so that they could be returned to the condition they were in. I cannot help you with your questions about upgrading licenses and keys so maybe someone else will chime in. Personally, I am not a fan of dual booting, many problems could happen. Opinions vary.

Download Windows 8 Enterprise Evaluation

From my point of view, I would image backup XP, Vista, Windows 7 using the software of your choice (perhaps something like Acronis). Then, install Windows 8 on unallocated space. Do you know what unallocated space is? I apologize. I know nothing about what you know. Anyway, good luck. There are tutorials here:

Installation & Setup - Windows 8 Forums

Suggested Steps To Take Installing And Setting Up Windows 8

2 more replies
Answer Match 39.48%

Hi there,
I have been looking for a simple way to begin to understand the command line in windows. I'm trying to import python code from a folder, and at the moment I can only get my code to run if I save my folder in the default c:\Users\Jamie\<full path>. My question is in two parts
1. How can I run simple scripts from anywhere else (say, my documents)
2. Can I edit paths somehow such that typing % python <script name> will run my script, from the default C:\Users\Jamie, or otherwise?
Sorry if the questions themselves contain errors in understanding, i haven't used the Windows command before

A:Using PATHS in the command line in Windows 7

so you want to do this in command prompt?

python c:\whatever\subfolder\somescript.py


Where is python.exe located?

You want it to work for your account only I assume (?)

9 more replies
Answer Match 39.48%

Quote:
So, how can I get an Absolute path into my Test Volume's G:\boot\BCD store ??


Using Visual BCD Editor or bcdedit.

VBCDE can edit every single element of BCD - it's a general and professional tool like bcdedit - give it a try.

More replies
Answer Match 39.06%

I used to have no problem running the following command:
DATE /T > x:\WEB\CASE1\LOG
TIME /T >>X:\WEB\CASE1\LOG
Then all I did is to move the LOG directory right into the WEB subdirectory,
and now, when I run DATE /T > x:\WEB\LOG, or TIME /T >>X:\WEB\LOG...I keep getting "access is denied".
This is total surprise for me, because:
(1)I have on X:\WEB\CASE1\LOG, the exact same full read/write/full control permissions I have
on X:\WEB\LOG.

-The server that hosts the X:\ path is a windows 2003 sp1 server running in an Active Directory environment.
I am part of the Administrators group on that server
-The client computers I am running both commands from are WinXP SP3 computers that I have local Admin rights on.
And of course, X:\ is a valid mapped drive (just pointing to the server. X:\ = \\servername\path).
And YES, I can create/delete files/directories on that x:\WEB\LOG path on which the 2 above commands fail with
the "access is denied" error.

I am running out of solutions (I even removed and re-created my file permissions rights over the denied path, but in vain. Any idea what could this be?
Thanks for your help
 

A:Access denied to paths I have full rights on

Check the share permissions in addition to the file permissions. Check the special permissions for any deny permissions as deny permissions supercede allow permissions.
 

1 more replies
Answer Match 39.06%

Hi guys,

We have been using a labeling software from a laptop with Windows Vista for a long time. In that laptop we have thousands of labels stored that we open and edit with such software. Those labels contain logos of companies as absolute paths, that is C:\...\something.jpg , instead of embedding the image on the file.


Now we have installed such software on newer PCs and moved those files to the new PCs. Consequently, the labels appear with the links to the logos broken.

I don't know how to manage that.

Can you give me a hand?

Kind Regards,

videoclocknet

A:Files with absolute paths links - How to move them?

Just to say those images are on any folder of the C: unit from the laptop.
There is no a folder that contains the set of images.

9 more replies
Answer Match 39.06%

Long file paths cause real problems when need to move/copy or delete large amount of data that the path is 350 character long (max character allowed by Windows is 256)

I was wondering if anyone knows of any third party app. that can help with this. Something that will prevent users from naming files/folders on the network and display a message to them.

Renaming files/folders is not what I'm looking for. The problem currently is resolved, I'm trying to avoid this from happening in the future.
Thank you
 

A:Prevent users from creating long paths

I think the real problem here is that the users don't always see the full path.
If you as an administrator map a network drive to a path, the user will be blissfully aware of the true full path.
I'm pretty sure that no human is going to use a path that length deliberately.
 

1 more replies
Answer Match 39.06%

Quote:




Last week Microsoft announced the Windows 10 editions that will power personal computing and Enterprise systems across the growing wide range of devices available. With this announcement Microsoft also reconfirmed they will offer free upgrades to Windows 10 for qualifying Windows 7, Windows 8.1 and Windows Phone 8.1 devices for the first year after the launch of Windows 10.

This week, a blog post on Microsoft's Australia Partner Network offered more detailed information about the specific paths for upgrading to Windows 10. As previously mentioned, but now further spelled out, devices that take advantage of the free upgrade will receive ongoing Windows 10 updates for the life of that device and the free upgrade to Windows 10 will be delivered through Windows Update.




Microsoft spells out upgrade paths to Windows 10

A:Microsoft spells out upgrade paths to Windows 10

"If upgraded within the first 12 months following launch, the device will receive ongoing Windows 10 updates for free for the life of that device"

Now that's what I wanted to see, until now there has been no clarification as to whether updates would be free or a suspected subscription service.

2 more replies