Tech Problem Aggregator

No internet access on multiple devices

Q: No internet access on multiple devices

Hi there.
I am using my phones 3G to type this and it's a real nuisance since I cannot research information for essays and other important aspects that I need when studying for my A levels.

Anyway, it started last night around 11pm, everything died and I thought it was because of the bad weather.
I woke up to sunshine however the internet was still not working.

The router is a SuperHub 2 and it had no problems up till now, the lights for 5Ghz and 2.4Ghz are flashing and so are the other lights on the router - this the router is working.

The problem is the connectivity, I use my laptop, iPhone and computer all together when studying and playing games. All of which has the same problem. All have the 5 bars connectivity however they all say "no internet access" and no response from the DNS servers.

What is the problem then?


What I've done:
- I have release and renewed the IPs
- reset router numerous times
- turned on: off router numerous times
- fiddled with wires to make sure they're plugged in.
- turned on and off computers and laptops.
- set IvP4 to automatic.
- waited hours.
- went onto the Virgin Media router page via 192.168.0.X. Then I started the router up in factory status, starting I up a few times.


How do I fix this nuisance? I need the internet now, for work purposes.
Please help, since it's affecting me and my family members and all of our devices.

A: No internet access on multiple devices

Does the Virgin Media router page give you a status of the WAN?

We had a bad storm last week and it took a few days after power was restored for Comcast to repair their lines.

I was able to get to my router, but the WAN address was 0.0.0.0 - can't get there from here!

If you have a WAN address, turn everything off (no power) then
power up your cable modem, wait a few minutes for it to cycle through what it cycles through
power up your router (if seperate) wait for it to cycle through what it cycles through
finally power up your machine and check the network status on the Virgin Media router

If you don't have a WAN address, report the outage to your provider. They probably already know about your area, but a call never hurts.

Bill
.

8 more replies
Answer Match 64.68%

Okay, so I moved my wireless router to a more central location in my house (I got low signal in my room) and since then I've been able to connect to the network but only with limited access. Trying to connect to a webpage results in the "DNS lookup failed" error message (Chrome). My brother's computer had had the same issue, and the PlayStation 3 has had connectivity issues also, however I have been able to use my phone with the WiFi without any issues.

I've tried unplugging/turning the router on and off to no effect. Using a different router does not change the situation either. When I try to diagnose the network connection, it says that it could not identify the problem. Any ideas?

Some information:

Both computers run Windows 8
My phone is a Nokia Lumia 620 running WP8
The WiFi status window states that IPv4 and IPv6 have no internet access
My computer uses a Qualcomm Atheros AR5B125 wireless network adapter and says it is working correctly. The adapter is set to work with IPv4/6. IPv4 is set to obtain IP & DNS addresses automatically.

Any help is greatly appreciated. Thanks!
 

A:wifi limited access on multiple devices

For a Windows PC ...

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If your only email accounts are free (Hotmail, gmail, etc.) try this direct link. If you need help with a screen shot see TSG Posting a Screenshot. FWIW to take screen shots with Windows 8 or 7 or Vista I prefer to use the built-in Snipping Tool.

Identify your network if it is not obvious.

Also show ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

1 more replies
Answer Match 63.84%

Hi there,
I find this problem very tricky to explain due to its weirdness, so my apologies if this explanation doesn't come across very well.

I have been dealing with a very strange problem in that for several hours of each day (usually in the evenings) my Ipad suddenly refuses to send and recieve mail via the Ipad mail app. Also, during these same periods my PS3 console is blocked from the playstation network. My PC running XP mostly remains fine except youtube is often inaccessible via my gmail login and some sites appear to slow down, while most sites (non-google related) appear to behave as normal.
 
Strangely, I am still able to access my gmail inbox via web broswers on both my PC and Ipad - but the Ipad app itself refuses to work at all.
The problem only exists for periods of a few hours each day and then everything returns to normal with no problems of notice.
After running a quick scan with Malwarebytes, it found "pup.offerware" which I removed.
 
Any help would be amazing! Many thanks and here is my log:
 
 
DDS (Ver_2012-11-20.01) - NTFS_x86
Internet Explorer: 8.0.6001.18702  BrowserJavaVersion: 10.25.2
Run by Username at 21:50:49 on 2013-09-04
Microsoft Windows XP Professional  5.1.2600.3.1252.64.1033.18.3071.2111 [GMT 12:00]
.
AV: AVG AntiVirus Free Edition 2013 *Enabled/Updated* {17DDD097-36FF-435F-9E1B-52D74245D6BF}
FW: Online Armor Firewall *Enabled*
.
============== Running Processes ================
.
C:\Program Files\Tablet\Pen... Read more

A:Google/Gmail access blocked on multiple devices

My problem no longer exists. Could this thread please be closed/deleted? I could not find how to do that myself.
Thanks.

3 more replies
Answer Match 63.84%

Hi Guys,
 
Simple issue: Paypal.com won't load on any device connected in my home, pc, laptop, mobile phone etc.
 
This can only lead me to believe it's a router realted issue though I can't seem to find a solution. I've factory resetted the router, changed it for a new one etc. and still paypal.com is unaccessable.
 
If I run a 'cmd' ping test on the URL, it attempts four connections and fails. The windows host files are fine and I've tried turning of all firewalls, anti-viruses, malwares for a short time to test. Still fail.
 
Does anyone know a solution I can try?
 
- Milko

More replies
Answer Match 63.84%

I've read other topics about it here, but my situation is somewhat unique.

1) I can successfully ping websites from the command line (PC)/Network utility (Mac), but can't open any pages in internet browsers. This applies to all devices/OS/browsers (Win 8, OSX, iOS, Android) as well as apps and software that requires Internet access in the household.

2) The incoming e-mails (in Mac mail app) go through.

3) I have 2 routers ? AirPort Time Capsule and the standard router from ISP. I tried them both, same zero result (ping - yes, browsing - no).

ISP hesitates to send help, they don't see any issues on their side of the line yet.

Not posting any logs since it's a multiple devices/routers situation.

Any ideas?
 

More replies
Answer Match 62.16%

Hi,

I've read through a could of threads but have yet to find any answers for my problem. Basically my internet runs fine when a device is directly connected to my modem. However, when running through a router I get 2-10 second disconnects at random intervals on all devices hooked up to the router, be it wired or wireless. I've already tired three different router, all different brands, among other various things like updating/switch firmware and changing the router over to a new wall socket with no luck. I had my service provider come out and switch the modem, but that didn't help any. Any help would be appreciated.
 

A:Internet cutting out on multiple devices.

what cable is between the router and modem - has this been changed ?
you mention "wall socket"
As you have made a lot of changes to the modem and to the router(s) - i can only think of cable

Before making each connection , do a powercycle - see how below

connect with a small cable between the modem and PC - and that works fine
then with a 2nd cable - do the same
now you have two cables that you know work on the modem
Also while in that configuration post an ipconfig /all - see how below

then using the same cables - connect from the modem to the router
and using the known cable connect the PC to the router
Now test again and see if this time it works
ipconfig /all

We would like to see the results from an ipconfig /all - post back the results in a reply here.

If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the information above those entries

For Windows 8 or Windows 10
To open a Cm... Read more

7 more replies
Answer Match 60.9%

Hi guys,

Our ISP has recently changed our router from Prolink H6300G to Prolink H5004N.
Our Prolink H5004N is wired to the phone line.
All devices connect to the internet via WLAN.
No devices are attached to the router via LAN.

The unusual problem is, some wireless devices connect to the internet just fine, others connect intermittently.
Below are the list of devices:

ASUS Notebook PCs x 2 (connect)
MSI Notebook PC (connect)
Apple iPad2 (connect)
LG LED SmartTV (connect)
Sony PlayStation 3 Slim (connect)
RedFox Netbook (intermittent)
Samsung Tablet PC (intermittent)
Sony XPERIA Smartphones x 3 (intermittent)

It is not that the red devices could not connect, they do so, but a very irregular and on/off internet connection.

I am stumped by the variety of devices that constantly connect and those that do not.

Does changing from G to N may in any way cause this?

A:Unusual Wireless Internet Problem with Multiple Devices

All devices you listed are connected WIRELESS to the same Prolink H5004N?

Try to move these devices closer to the wireless Access Point (built in router). Just for a test
RedFox Netbook (intermittent)
Samsung Tablet PC (intermittent)
Sony XPERIA Smartphones x 3 (intermittent)

Does that fix anything?

9 more replies
Answer Match 60.48%

Last week or so, we had a storm, and devices got unplugged. Internet service was out briefly. Wireless internet came back shortly after, but my desktop and our PS4 both can't connect to the internet via ethernet, and I can't figure out why. I've done the usual stuff: power cycle, tried out other ethernet cords, etc. Comcast has said that it's not on their end, and our wireless signal is fine, so we're clearly getting signal through the modem and out through the router. My desktop is plugged into a different modem, but also won't connect to the one attached to the router. A hard reset of the modem didn't help, whether through the button or through the configuration settings. My desktop is claiming that there's no ethernet cable plugged in, though there definitely is. I'd suspect a broken port if the PS4 weren't having the same issue. I've tried a few things on the desktop, including installing the most recent drivers for the network adapter, rolling back the driver, disabling/renabling, and just deleting it and let it reinstall one on restart, and trying to reset the IP stack. I'm posting links to screenshots of some of the command prompt commands I've tried, and the results. They vary a little bit, I've gone into the registry to enable some permissions after access was denied. Any ideas you can send my way are greatly appreciated.
http://i.imgur.com/kK6y2mE.png http://i.imgur.com/lVWm470.png
Link to my computer model: http://www.newegg.com/Product/Produc...82E16883258020
My m... Read more

A:Wireless internet works, multiple devices not connecting via ethernet

Welcome to the forum on a none working of from a CNC prompt type ipconfig /all. Then tracert 294.119.131.66 post both results

0 more replies
Answer Match 59.22%

As it says on the tin really! I am an absolute non technically minded person so have no idea how to even start trying to fix this problem. A few weeks ago our router quite happily let multiple devices attach wirelessly to the internet at once but in the last couple of weeks it has started only allowing one device at a time to connect to the internet. If say my partners work laptop is connected then our home laptop/iPad can see the wireless router but it will not allow them to connect to the internet anymore. Can anyone help me to try and sort this please...I can use my computer for basic things but am in no way technically minded so please be very clear and simple with any help you are able to give.

TIA
 

A:Unable to connect multiple devices to internet using Huawei EchoLife HG521 router?

10 more replies
Answer Match 58.8%

I'm getting the "no internet access" error on all devices at home (mobile, all laptops), so I highly doubt it has anything to do with my computer settings. It shows as connected but with the yellow triangle with exclamation mark. I've already tried:
 
- Restarting computer
- Unplug + plug modem
- Unplug + plug router
 
The ethernet works fine (using it right now for this post), so I'm assuming it's something wrong with router?
 
On the router, there are 5 slots for cables, 1, 2 (ethernet), 3 (ethernet), 4, and "internet". 1 and 3 has green lights, the rest have no lights.
On modem, besides power icon,  the "internet" and "WANLink" lights are green, "wireless", "TV", "HPNA" and "WPS" are not lit.
 
Anyone know what else I should try?
 
Thanks.

More replies
Answer Match 58.8%

Hello everyone,

I'm fairly good with comptuers / networking but this issue has me baffled. Help would be greatly appreciated.

I have a linksys router (WRK54G) and have 2 desktops and 2 laptops connected to it wirelessly at the moment. I bought 3 smart phones (AT&T Tilts) and a new laptop recently. I don't use encryption but I do have MAC address filtering enabled.

The issue is that 1 of the smart phones can connect to the network and the internet, but the other 2 phones and the laptop can connect to the network but not the internet.

I did add their MAC addresses to the "allow" list ofcourse, which is why they're able to connect to the network. DHCP is enabled, and these devices get an IP address. I can see them as connected when i log in to my router as well through one of my other computers (I see the MAC address and the IP assigned to those devices) so I know they're properly connected to the network. However, when i try to pull up a website (using either its ip or its domain name), the devices try to open up the page but eventually give me a "The page cannot be displayed or downloaded because the connection was lost" on the pocket PCs, and a generic "page cannot be found" on the laptop. I don't see these requests in the outgoing log table of the router either... I'm supposed to see them as when i use one of my desktops, I can see which site was accessed by which IP.

So basically, the requests from 2 smart... Read more

A:Some devices can't access the internet

Disable MAC Filtering. It's doing you no good and possibly causing the issue. Strong passwords for the encryption and router access are all you need.
 

3 more replies
Answer Match 58.38%

I've configure my router that connects to my desktop modem. my LAN has internet access by not using "obtain IP adddress automatically " but the Wireless device has no internet access. if I use the automatic settings. both local and wireless has no internet connection.

please help me solve this problem. thanks in advanced!

here's my internet protocol settings

IP ADD : 192.168.1.8
SUB MASK: 255.255.255.0
DEFAULT GATEWAY: 192.168.1.1

PREFERED DNS: 192.168.1.1

A:No Internet access for wireless devices

It is possible the DHCP server on your router is stopped if you don't get an IP address when it is set to automatic.

I would check that first.

9 more replies
Answer Match 57.54%

Hi 
I don't know whether my question is right or wrong. 
  I have 2 Ethernet Port on my Embedded computer .I am using one is for Intranet connected device and another one is for internet.
I have connected some device to Intranet LAN Port..
Is there any chances for remote access the Intranet connected device like RFID reader and other devices.

More replies
Answer Match 57.54%

Hi, I've been having a problem for a week or so, where my internet will drop and become "limited" on certain devices, I own two laptops 1 on W7 and 1 on W8 and a Blackberry (this will never drop connection unless the router gets reset) The two laptops experience "limited" it is not linked to doing one specific thing when it stops working. if I click disconnect and then connect it USUALLY will come back instantly sometimes have to do it about 2 or 3 times, this is extremely irritating while watching shows or downloading because if I don't disconnect and re connect it will stay on "limited" for however long until I dis&re connect. This doesn't happen to my laptops at the same time, meaning that isn't likely a router problem (BB is always connected) I'm actually surprised that it has actually stayed connected this long.

I was reading a similar thread, and it didn't solve my problem but I did attach the cmd and xirrus.

noted: Casa is the personal internet for us and "instantlawns" is for my roommates' business. also my other roommates' internet does a similar thing where it goes limited but nowhere nearly as often as mine.

A:Limited access wireless internet on certain devices

Have you contacted Rogers to discuss this?

Also I would try using a public DNS instead of Rogers...They have had issues in the past

Free Public DNS Server

=> Service provider: Google
Google public dns server IP address:

8.8.8.8
8.8.4.4

=> Service providernsadvantage
Dnsadvantage free dns server list:

156.154.70.1
156.154.71.1

=> Service provider:OpenDNS
OpenDNS free dns server list / IP address:

208.67.222.222
208.67.220.220

=> Service provider:Norton
Norton free dns server list / IP address:

198.153.192.1
198.153.194.1

=> Service provider: GTEI DNS (now Verizon)
Public Name server IP address:

4.2.2.1
4.2.2.2
4.2.2.3
4.2.2.4
4.2.2.5
4.2.2.6

4 more replies
Answer Match 57.54%

Hello,

I have moved into a new apartment and my laptop connects to the wi-fi network but there is no internet access. The apartment is on a school if that makes a difference, I'm not using a home router. My Mac, tablet, phone etc all connect to the same network without any issues. The connection to the network works fine via an ethernet cable but I no longer have access to the port to connect this way.

I have tried going to cmd prompt to type:
"ipconfig/release" and then "ipconfig/renew" to no avail.

I have also tried the following commands with no resolution to the problem:
ipconfig/flushdns
nbtstat -R
nbtstat -RR
netsh int ip reset c:\resetlog.txt
netsh winsock reset

I have uninstalled my third-party firewall and tried selective start-up and no dice there either. I have also made sure that the IP and DNS address are obtained automatically.

Anything I can post here so someone can identify the problem please?

Thanks
 

A:Wi-Fi connected, no internet access. Other devices work

can we see an ipconfig /all
also redo the tcp/ip reset - see below

ipconfig /all

We would like to see the results from an ipconfig /all - post back the results in a reply here.

If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the information above those entries

For Windows 8 or Windows 10
To open a Cmd Prompt or an Administrator Cmd prompt from the Desktop.
http://www.bleepingcomputer.com/tutorials/open-an-elevated-command-prompt-in-windows-8/
Use Windows + X Keys together and choose Command Prompt (Admin) from the list.​Or Right click on the windows icon - bottom left hand side - A menu appears - choose Command Prompt (Admin)[/indent]

For windows version, XP, Vista, W7
Hold the Windows key and press R
Now type CMD
Now press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):​

In the command prompt window that opens, type the fol... Read more

13 more replies
Answer Match 57.54%

This morning i tried to use other devices (another laptop, a cell phone and an ipad) that were working fine before, but now they don't have internet access. The devices can connect to the router, but internet shows "No internet". I was checking if their were getting the info like ip, dns..etc and they had it so have no clue what's going on. The only 2 things that do not have problems is my laptop and a WDTV Media Player.

A:Laptop access internet via wifi but not other devices

Tried restarting the router?

2 more replies
Answer Match 57.54%

Hi guys hope you can help,

I am having a problem with the devices on my home wireless network. There is a laptop, desktop, PS3 and an Ipod all of which access the internet through the wireless network, a few days ago however I was unable to connect to the internet with the desktop. It had been fine all day but then I left it and came back to it an hour or so later and was unable to get back online after having tried all the usual restarting of devices. I gave up and went to have a quick game on the ps3 to take my mind off all the work i was now unable to do and found that that too had lost its connection to the internet (also was fine earlier) checked my Ipod touch to see if that had access and neither did that, but in the background the girlfriend was obliviously typing away on facebook or something with no problems at all.

The next day all was well again everything had access to the internet so I just forgot about it and carried on with my life (as you do). However the day after that I had exactly the same thing again, I was using the PS3 online no problems. Girlfriend comes in and turns her laptop on so I disappear onto the PC to do some work and no internet connection again, check the PS3 and Ipod, also no connection only my girlfriends laptop is fine.

So....it seems to me, in my limited wisdom in such matters that, if I turn my desktop on first (before girlfriends laptop) and connect to the internet then all is well, but if she gets to the internet first then thats i... Read more

A:Laptop blocking internet access to all other devices

I'm going to move this to Networking from Web & Email.

What is the brand and model of the router?

Please show the following for

a. The desktop when it has internet access,

b. The laptop (if it is running Windows) when it has internet access, and

c. The desktop when it cannot access the internet.

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

1 more replies
Answer Match 57.54%

Hi there

Not sure whats happening here but getting multiple displays for the same devices !!!!

Any fix, or is system Broken.



Cheers
jimbo

A:Devices and Printers - devices being displayed multiple times

Looks like Ghosts of DLNA devices. Start by taking offline any DLNA capable gear, reboot the Gateway and also clear its IP Table.

Also clear out those ghosts from Devices and Printers.

For some reason this started in Windows 7, when Microsoft started to play games with DLNA and media Shares.

1 more replies
Answer Match 57.12%

Hi all,

I was hoping someone could help as I have spend hours scouring forums and trying fixes with no luck..

I have recently started getting the little yellow triangle with the exclamation point on my network access system tray icon.

My internet is fine as all other devices (pc, iPad, I phone, Android phone & ps3) all connect perfectly to the internet.

If I disconnect or run the network troubleshooter my computer connects for anything between 30 seconds and 5 minutes before telling me no internet access. Network Diagnostics tells me the default gateway is not available and has fixed it but only for a few moments.

I am using an Edimax EW-7622UMn wireless network adaptor for which I have installed and uninstalled and reinstalled and updated drivers.

I have performed a clean boot and am getting the same issues. I don't have any other connections configured on my pc that could be conflicting.

Please, does anyone have any bright ideas? Thanks in advance.

A:Little Yellow Triangle & no internet access - Other devices connect

Hi Chris and welcome to W7 Forums

Does it make any difference if you connect wired (Ethernet) or wireless, as you are doing now?

Can you open an Elevated Command Prompt and post the results of the following command: ipconfig /all

9 more replies
Answer Match 56.28%

I have 2 laptops, an ipad, and 2 smart phones using a dlink router. All devices connect to the router beautifully but will not access the Internet.
Both laptops will access the internet when hardwired to the modem via Ethernet cable.
Rebooted the modem, rest the router, still no connection.
Reset router and one laptop can access the Internet. The other one can't.
ipad and 2 smart phones will not access the Internet even after the reboot of both the modem and router.

It would seem that one laptop at a time can access the Internet through the router with a lot of rebooting and resetting of the router.

I spent a long while on the phone with my Internet Provider and they were no help.
Any suggestions sure would be appreciated.

This is a new problem as all devices have formerly worked great.
 

A:Solved: Devices access the router great, but can't connect to the Internet.

13 more replies
Answer Match 55.86%

I wanted to share my ethernet internet connection over wifi so I have created a wifi hotspot on my laptop using "NETSH" commands in cmd prompt.
I have enabled sharing of ethernet connection by going to ethernet properties>>sharing>>check box (Allow other network users to connect through this computer) but the internet is not being shared.
I have configured other devices with static IPs. Gateway and subnet mask is also correct. I am also using different IPs of the same subnet.
Everything was working fine until perhaps I tried installing Connectify software, I uninstalled it later.
Kindly help to troubleshoot the issue.

More replies
Answer Match 54.6%

I consider myself an advanced user, but this one I've never seen, nor can I find info out for...

I haven't been able to plug a video camera or external hard drive into my computer via FireWire. I then tried a different cable, nothing. I then tried a different device and cable, nothing. I then tried a different computer with two devices, nothing.

My USB2.0 works fine with each device and computer. I also took the new computer into CompUSA and they tried their firewire device and all worked. I bought a new firewire cable, but I have the same luck with each device.

How can 2 external hardrives, and one sony camera not work, after working for a year. What happened? What do I need to do?
 

A:Multiple firewire devices on multiple computers not working

6 more replies
Answer Match 53.34%

There are multiple websites that I cannot connect to, facebook, rottentomatoes, youtube, to name a few. Others seem perfectly fine. A few seem okay, but seem to be running slowly.

This is the case for both my computer (on which I am running Windows 7), which is connected directly to the router, *and* mobile devices which are connected wirelessly.

On my computer I have tried using several different browsers to no avail, but when I used the TOR browser to proxy, I was able to access them.

I apologize if this has been asked, but I haven't been able to find anything this specific.

Thank you.
 

A:Can't connect to multiple websites on multiple devices

6 more replies
Answer Match 53.34%

I have 4 computers at HOME (two I just recently bought). I want my children and I to be able to connect to the Internet at the same time (without having to fight over it haha). It was suggested I get DSL dedicated access but the monthly service is kind of high for my budget. Another option is the dialup access...to use one of the computers as a proxy server(?) where the other 3 PC's will connect to the Internet. However, I was told that this will create problems. If so, what are the major problems I have to deal with? And what do I need to buy (hardware) to go this route or what do I need to setup? Bottom line is: I just want to get connected to the Internet at the same time with my kids, with a low monthly payment. Is this impossible?
Please help.

[This message has been edited by NottaClue (edited 05-11-2000).]
 

A:{Advice Given} - Multiple Internet Access

7 more replies
Answer Match 53.34%

Hello friends!

I hope someone can help me with this weird thing.

I am running XP Professional at home. I have a logon for myself, my wife, and my son.

If I am logged on, and I have an internet application open (such as Explorer or Outlook) then anyone else who logs on cannot get out to the internet unless I fully log off.

I had someone else suggest that the solution to this was a .vbs file that he wanted me to download and install, but that seemed like a dangerous solution.

I'm thinking that there is setting, possibly in the registry, that could help.

Any ideas?
 

A:Multiple Logons and internet access

Hi and welcome. Are you on a network with the other computers? How are you connected to the internet?
 

2 more replies
Answer Match 52.92%

Hello everyone,I'm running an HP (model #?) purchased in 2004, with Windows XP SP1. I picked up some viruses or malware around 8/1/07 and things have been steadily getting worse. Please help me resolve the following issues:-Spybot always picks up Virtumonde and PWS.LDPinch.IE malware, but they always reinstall when I reboot.-Beginning on Sunday, 8/26/07, I have internet connectivity problems. My NIC is unable to configure an IP address. Attempts to release and renew always fail.-However, I tried a fix suggested by Microsoft support, namely deleting corrupted Winsock registry keys. I tried this last night (8/27/07): deleting Winsock and Winsock2 from the registry, rebooting, and reinstalling TCP/IP. This actually worked and allowed me to gain Internet access. But the next time I booted up, the problems were back. The Winsock registry deletion no longer works because Winsock2 reappears as soon as I boot up! So the NIC card thinks I have TCP/IP installed even if I actually don't!I think a virus is at the root of all this... could you check out my HJT log and give me some insight? In the meantime, I will have to shuttle between my office computer (for internet access) and my home computer, which has none at the moment. Thanks!Logfile of Trend Micro HijackThis v2.0.2Scan saved at 12:10:52 PM, on 8/28/2007Platform: Windows XP SP1 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Boot mode: NormalRunning processes:C:\WINDOWS\System32... Read more

A:Multiple Malware And Internet Access Problems, Please Help!

Hi1. Download this file -combofix.exe (I guess you need to download it temporarily with your other computer and transfer the file to the infected one with help of removable media)2. Double click combofix.exe & follow the prompts.3. When finished, it shall produce a log for you. Post that log in yournext reply with a fresh hjt logNote:Do not mouseclick combofix's window whilst it's running. That may causeit to stall

2 more replies
Answer Match 52.92%

This started happening to me not to long after I downloaded some Windows security updates about 2 - 3 months ago. I'm not sure which ones as I didn't pay much attention.

My internet connection to this computer completely drops. My modem and Router (Microsoft MN-700) stay up and my other computer(wireless), Xbox(wired) and PSP(wireless) can still connect online.

Today it was much worse as I could only be running one thing that needed connecting at a time or I'd lose everything. For example Internet Explorer or an online game, AIM and X-fire all at the same time would lose connection. Any combination of the two on a good day work just fine.

I've ran a full virus scan, ran Ad Aware and Spybot Search and Destroy without a single hit. I usuually do this weekly.

I've searched many places and no solution has helped.
System Specs,
Video Card : RADEON X800 PRO
Video Driver : ati2dvag.dll
Driver Version : 6.14.10.6601

Sound Card : Soundblaster Audigy 2 ZS Platinum
Sound Driver :
Driver Version :

DirectX : DirectX 9c
Operating System Windows XP Service Pack 2 5.1.2600

CPU Info

CPU Count : 1
CPU Type : 3388 MHz GenuineIntel Pentium IV
15 2 9

RAM : 1536 MB Total
1126 MB Free
Virtual RAM : -1706 MB Total
1966 MB Free
---Network Information-------------------------------------

Description : Intel(R) PRO/100 VE Network Connection
Manufacturer : Intel
Driver : System32\DRIVERS\e100b325.sys
Bound Protocols

And the Massive Hijack this log,

Running proce... Read more

More replies
Answer Match 52.92%

Situation:

A custom built, hand-me-down, PC (albeit a good few years old now) comprising of:

One IDE Drive (one partition) with Windows XP Home - original installation.
One SATA Drive (four partitions) with Windows Vista Home Edition and XP Pro (the other two partitions are currently spare) - new OS installations.

Nvidia NF7-S V2.0 Motherboard - BIOS 'now' up-to-date with all relevant drivers.

2-Wire BT Broadband Business Hub.

Problem (bearing in mind I have little knowledge of using multiple volumes and/or Networking do's and don't's etc. etc - hence the post):

XP Home (on IDE drive) will connect to the internet (as it always has done) via the Ethernet Cable connected to the Router, but it does not recognise the Gateways USB cable option (yellow exclamation mark in Device Manager - and it won't/can't install a driver from any location - Router Installation CD, Windows/systems32, Windows up-date etc).

XP Pro (on one of the new partitions on the SATA drive) will connect to the internet, but ONLY via the USB cable when connected to the Router - it's the opposite to the above problem when booting from that partition i.e. it does not recognise the Gateways Ethernet connection (this time, it's a yellow exclamation mark against the Ethernet Controller AND the SM Bus Controller - again, neither will find/install a driver from any location).

Vista (on the other SATA drive partition works perfectly, regardless of h... Read more

A:Problems getting Internet access whilst using multiple OS's on one PC

Virtual Madness said:





Oh, and by the way, as strange as it probably sounds, yes, I would like to have XP Home, XP Professional and Vista Home Premium all on the same PC.Click to expand...

You could just use virtual machines for the other two operating systems -- assuming the hardware can handle the load of a VM (it should if you have Vista running) and you don't need to leverage massive resources for 3D or gaming on the VMs.

Your just tripling the complexities by running 3 host OS' in my honest opinion. While I agree they should all work, you'd only need to tackle one OS if you ran the rest as guests.

Out of idle curiosity why do you need separate XP home and professional versions, as well as Vista anyway?
 

2 more replies
Answer Match 52.92%

Adapter 1: Intel Built-in Lan
Adapter 2: Pci Card

I used to access shared internet from a router, now the router has no internet we only use it for local home sharing. I added the secondary adapter to connect to the DSL-modem directly.
so now when I disable the 1st adapter my internet works fine. when they're both enabled internet doesn't work at full speed or sometimes not at all.

Please help.......

A:Multiple Lan, Can not access internet at full speed.

  
Quote: Originally Posted by jafferyraheel1


Adapter 1: Intel Built-in Lan
Adapter 2: Pci Card

I used to access shared internet from a router, now the router has no internet we only use it for local home sharing. I added the secondary adapter to connect to the DSL-modem directly.
so now when I disable the 1st adapter my internet works fine. when they're both enabled internet doesn't work at full speed or sometimes not at all.

Please help.......


Welcome to the Seven Forums.

I would suggest that you connect your DSL modem to the router and get your connection to the internet that way. Does your DSL modem have Network Address Translation (NAT) to protect you from some of the dangers on the internet? Your router probably does. You should be using it.

1 more replies
Answer Match 52.92%

Help urgently needed here please:This laptop owned by our carer?s daughter would not access the internetI think it has not completely updated SP2 as no updates show in AddRemove control panelNorton Internet Security 2006 was out of date and has been uninstalledI found it was severely infected and I have run all the recommended clean programs :Adaware 2007 ? Virtumonde x 10; Win32 SurfNav x 6; Win32.Trojan.Agent x 10; Win32.Trojandownloader.Zlob x 10 etc . Total 487 threats treated.Spybot found 413 problems all fixed except the following it would not fix MicrosoftWindowsSecurityCenter AntiVirus OverrideMicrosoftWindowsSecurityCenter Firewall OverrideMicrosoftWindowsSecurityCenter SP2UpdateMicrosoftWindowsSecurityCenter _disabledWin32.BHO.df I then copied and ran AVG free which treated a further 46 threatsI can now connect to the internet (AVG updated itself) but IE7 is not controllable so for example Microsoft update is not accessible and the browser hangs at whatever website is chosen.Despite best efforts Windows Firewall settings remain greyed out. Therefore all treatment is by downloading on another machine and copying utilities over by flashdrive.This is the HJT fileLogfile of Trend Micro HijackThis v2.0.2Scan saved at 11:09:56, on 27/01/2008Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16544)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\... Read more

A:Multiple Infections Disabling Internet Access

Welcome to the BleepingComputer HijackThis Logs and Analysis forum. My name is Richie and i'll be helping you to fix your problems.Apologies for the late response,as i'm sure you can appreciate we are extremely busy.If you've already recieved help at another forum and your issues have been resolved,or you're presently recieving help elsewhere then please let us know.If you have not followed the info in the link below prior to posting your log then please do so now:Preparation Guide for use before posting a HijackThis Log:http://www.bleepingcomputer.com/forums/t/34773/preparation-guide-for-use-before-using-malware-removal-tools-and-requesting-help/If you still require help,please post a new Hijackthis log into this topic in your next reply.Also post a detailed description of the issues you're experiencing.*Note*Post all reports/logs directly into this topic,not as attachments,thanks.

13 more replies
Answer Match 52.92%

Hi, i'm running Windows 7 on my laptop and i am using mobile 3G modem as an adapter to connect to Internet. The problem is when i am connect the NIC to my DLINK router, the Internet connectivity become lose where Network and Sharing center stated that there is Multiple Networks with no Internet access. FYI, my DLINK router is not connected to Internet but Mobile 3G modem does connected to internet. Any help and suggestion would be greatly appreciated!!

This is my result of ipconfig /all

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Zai>ipconfig -all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Zai-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

PPP adapter XL GPRS:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : XL GPRS
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.234.89.111(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 0.0.0.0
DNS Servers . . . . . . . . . . . : 202.152.254.245
202.152.254.246
Primary WINS Server . . . . . . . : 10.11.12.13
Secondary WINS Server . . . . . . : 10.11.12.14
NetBIOS over Tcpip... Read more

A:HELP!! Multiple Networks with no internet access issue

This is weird, the 3G modem (Huweii?) should work independent to your LAN and Wireless adapter.

4 more replies
Answer Match 52.08%

I need to load an internet browser multiple times to get internet access after the computer has been on for a period of time. The longer the the time the computer has been on, the more times I need to load the browser. This problem has existed for several months. It existed before and after downloading Windows XP Service Pack 2.

For example, I left the computer on overnight last night. I needed to load Microsoft Internet Explorer thirteen times the first twelve of which displayed the message "The page cannot be dispayed." On the thirteenth attempt I received access to my home page on the internet. When I turn off the computer and restart it, I get internet access on the first load of a browser.

I have internet access with email and other programs which are browser independent. It seems to make no difference in results whether I use dial up or a DSL line. It also makes no difference which internet browser I use. I get the same result with Internet Explorer, Maxthon or Firefox.

The computer that has the internet access problem is running Windows XP Pro with all updates installed. I have a DSL router with 4 computers attached, two with Windows 98 SE operating systems, a laptop with Windows XP Pro operating system and the problem computer which is hardwired to the computer. None of the other three have browser internet access problems.

I use the most recent versions of Zone Alarm, Norton AntiVirus with the most recent definitions installed, and S... Read more

A:Load browser multiple times for internet access

Go here and download HijackThis and post a log. HijackThis and CWShredder

2 more replies
Answer Match 52.08%

Here's what happened:

I wanted to set the computer to a static IP of 192.168.0.2. I tried this by going into Network and Sharing Center, clicking Change Adapter Settings, right clicking Wireless Network Connection and selecting Properties, selecting Internet Protocol Version 4 (TCP/IPv4) and selecting Properties, selecting "Use the Following IP Address" and then setting the IP address and default gateway to the above Ip address, keeping Subnet mask at 255.255.255.0. I set Preferred DNS server to 8.8.8.8 and Alternate to 8.8.4.4.

Well, that didn't work. I lost internet connection immediately. I later realised it was probably because my router had that in the range of auto-assigned addresses.

Anyway, I changed it back to Obtain IP address automatically.

Now I still don't have internet access. I have tried restarting my computer as well as resetting the router.

When I hover over the wireless connections icon, it says I am connected to both my home wifi connection as well as "unidentified network" both with no internet access.

A:Multiple internet connections with no access (wireless adapter)

Welcome to Seven Forums!

Have you tried the windows built in network troubleshooting tasks?

Troubleshoot Network & Internet Problems in Windows 7 & Windows 8

6 more replies
Answer Match 52.08%

The computer can not access internet over wifi even though its connected, works when hardwired. Red X with flag in bottom notofication bar that says PC Status: At Risk when you hover over it.Ran malwarebytes, super anti spyware, and norman malware found lots of malware and spyware and fixed it, when I run DDS it freezes the whole computer, let it sit over an hour and no change. So I ran Hijack this here is the log
 
Logfile of Trend Micro HijackThis v2.0.5
Scan saved at 4:32:01 PM, on 5/13/2014
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)

Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\ibmpmsvc.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
c:\Program Files\Microsoft Security Client\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\Program Files\PremierOpinion\pmropn.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Microsoft Security Client\msseces.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\Program Files\Synaptics\SynTP\SynTPLpr.exe
C:\Program Files\SUPERAntiSpyware\SASCORE.EXE
C:\Program Files\Java\jre7\bin\jqs.exe
C:\Program... Read more

A:Help! Cant access internet over Wifi and multiple malware concerns

Hi there,my name is Marius and I will assist you with your malware related problems.Before we move on, please read the following points carefully.First, read my instructions completely. If there is anything that you do not understand kindly ask before proceeding.Perform everything in the correct order. Sometimes one step requires the previous one.If you have any problems while following my instructions, Stop there and tell me the exact nature of your problem.Do not run any other scans without instruction or add/remove software unless I tell you to do so. This would change the output of our tools and could be confusing for me.Post all logfiles as a reply rather than as an attachment unless I specifically ask you. If you can not post all logfiles in one reply, feel free to use more posts.If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed.Stay with me. I will give you some advice about prevention after the cleanup process. Absence of symptoms does not always mean the computer is clean.My first language is not english. So please do not use slang or idioms. It could be hard for me to read. Thanks for your understanding.     HijackThis is not the preferred initial scanning tool in this forum. With today's malware, a more comprehensive set of logs is required to determine the presence of malware.    Scan with FRST in normal modePlease download Farbar's Recovery Scan Tool to you... Read more

14 more replies
Answer Match 51.66%

Hi all, My friend asked me to look at his laptop as he had an error message relating to a .dll file. This error box would pop up roughly 100 hundred times during loading. I managed to get rid of some of the malware on the computer, including Greener Web. Since then the .dll error message has stopped, but i'm unable to access the internet via WiFi. Can anyone help? Cheers

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD E-350 Processor, AMD64 Family 20 Model 1 Stepping 0
Processor Count: 2
RAM: 3693 Mb
Graphics Card: AMD Radeon HD 6310 Graphics, 384 Mb
Hard Drives: C: Total - 476837 MB, Free - 428152 MB;
Motherboard: PEGATRON CORPORATION, TKBSB
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

A:Unable to access internet via WiFi after multiple malware removals

13 more replies
Answer Match 51.66%

Computer: Dell Dimension 4500Windows XP Home 2002, Service Pack 3Internet Explorer 8Firefox 3.6.16This is my old computer, mainly used by my husband, who pays no attention to warnings, update indicators, etc., so I have no idea when all these problems started. He was complaining that he couldn't stay connected to the internet through Internet Explorer (it would freeze mid-search) and couldn't even get on the internet through Firefox (cannot connect to server).When I started checking the machine, I found multiple disfunctional softwares (more details below) and I couldn't stay connected to the internet for long enough to access any web sites to check for updates (e.g., Windows Update) or run any analysis tools (e.g., Norton).I have run the start-up disk check (I think this is a NIS feature) at least 6 times in the last 2 days. Here's what happens when I log onto the computer after disk check has run:Popup windows saying "[X software] has encountered a problem and must close" for:Windows Genuine Advantage Notification - after reporting the problem popup closes, the bottom bar on the desktop turns from dark blue to whiteAdobe Reader (8.3.0)Acrobat ManagerWhile all this is popping up, Norton Internet Security (2010) runs its initial scan and seems to complete OK, but I cannot open the NIS main page and I cannot run the update feature. If NIS has been disfunctional for a while and not updating, I may have picked up malware and viruses during that time.... Read more

A:Multiple software "encountered problem, must close", no internet access

Welcome aboard Honestly, with so many issues I'd suggest reinstalling Windows.

3 more replies
Answer Match 51.66%

My issue regarding malware removal almost mirrors the posting/fix by Kevinf80 when helping HENDUBZ on 10/20/14. The ill computer is HP Media Center (m7334n) upgraded from XP to Windows 7.I believe it might have started from the MyOSProtect.dll virus. Log below xferd via my USB drive. Thanks so much for your expertise. I hope I have the same success at HENDUBZ!

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, x64 Family 15 Model 43 Stepping 1
Processor Count: 2
RAM: 3006 Mb
Graphics Card: ATI RADEON XPRESS 200 Series, 64 Mb
Hard Drives: C: Total - 455272 MB, Free - 326950 MB;
Motherboard: MSI, AMETHYST-M
Antivirus: None
 

A:Unable to access internet via WiFi after multiple malware removals (v2)

7 more replies
Answer Match 51.66%

Our ISP recently updated their hard ware to work with the Sprint network. Note: our ISP is not Sprint, but the local phone company.

Our Hardware:
Internet: DSL 10.0 (highest speed available)
Modem: Comtrend (ISP provides)
Router: Belkin N
Computer: 10 yr old Dell running XP - service pac3 - wired connection
Kindle Fire (first edition, no HD, etc) - wireless connection
Xbox 360 - wireless connection

Issues:
Xbox - went from constantly bumped from Xbox Live game by losing internet connection to not being able to enter a game at all
Kindle - went from occasional "network error' message during online tasks to having to restart download (multiple times) or refresh page for most any or all online tasks
Computer - have to click refresh to get most any page to load after the home page

What we've tried so far:
I have recently cleared the cache on both the computer and Kindle. XBox's new security measures have been met.

My questions:
Do any or all of these issues seem to be related?
Is there a piece of equipment or something we may be missing to make all of these things work? I am a networking novice.
Who should I call to get these issues corrected, my ISP or a tech service? Note: if I start with the ISP and they do not find an issue I have to pay for the call.
 

A:Multiple issues over multiple devices

First. You should try to NOT use a wireless connection for any type of gaming: PC, Mac, Console, etc. If you can hard wire the xbox you'll be waaay better off than using wireless.

Now... Yes, the issues could be related - there maybe an issue with the Belkin N router. I'd try to first reset the Belkin router to default settings, check on manufacturer website for instructions how, most routers you can press a "reset" button w/ a paperclip or ball point pen. Reconfigure the Belkin router, recreate the wireless network and see how everything works. If you are still having issues, humor me and connect the Dell directly to the DSL modem, bypassing Belkin router. See if you still have connection issues, if you do then it could be the DSL modem that is the problem and call your ISP to replace. If you don't have same issues then it's most likely an issue with the Belkin router. Replace it. Don't buy the dirt cheapest router at the store, but you most likely don't need the most expensive one either. Find a good middle ground router, ask sales associate to assist you accordingly.

Post back, Hope this helps!!
 

1 more replies
Answer Match 51.24%

Hi all,
I have a rather perplexing problem with internet access from my laptop (Win 7 Home Premium, Avast Free). My property is a large building with thick, granite walls so I've added 3 hard-wired, wireless access points (2 recycled, old routers and a TP-Link WAP) in various locations back to the main router (BT Homehub 3), served by up-to 8Mbps BT broadband service (I typically get 6Mbps - no fibre-broadband available here!) Just to complicate things a little more, this is a holiday property with 4 other families staying, so bandwidth use is a little difficult to control.
Mostly, everyone has been fine: my Android phone, my Nexus tablet and my wife's iPad plus other visitors' various devices all connect via wifi from any of the access points. (Everyone had problems this morning but I think BT may have been doing something with the exchange overnight so I'm going to assume, for now, it's just my laptop that's having problems).
OK, the laptop will connect to any access point, including the main router, but generally states "No internet access" from there. I say "generally" because it has done on past visits to the property and sometimes connects briefly - usually if I reset, disconnect or unplug something. Also, I CAN connect the laptop via Ethernet from any point.
Can someone outline a process I can try to identify and fix the laptop please? If problems recur with other kit I may need help with my local network too.
Thanks,
N... Read more

A:Wifi "No internet access" on laptop, other devices OK

12 more replies
Answer Match 49.98%

Good morning.

I have a computer system that has had multiple viruses over the past 6 months. It seems like everytime I clean it, another virus pops up, almost always of the fake anti-virus variety.

This week I was called into the users office, and found the system in a loop. Starting Windows XP, then rebooting. After trying multiple times to get into safe mode, or boot normally, or anything I resorted to using the Windows XP cd and repairing the XP installation. This at least allowed me to boot into Windows again, but there are still issues.

I can not get into Internet Explorer, clicking on the icon results in "Internet Explorer has encountered a problen and needs to close. We are sorry for the inconvenience."

The display drivers are not installed, and any attempt to install them results in an error stating that access is denied. Looking at the serupapi log, i can see that access is being denied when trying to do anything with igfxcui in the registry. If I browse to that location in regedit, i can not see the properties because I don't have access to it. (I am logged in as the administrator by the way).

I have installed Google Chrome as a way to get online with this sytem, and have had sporadic instances where I am being redirected to the wrong website after clicking a link in Google.

I have scanned the system with MBAM, SuperAntiSpyware, and AVG without any luck.

I have been working on running the Windows Updates, bringing it up to SP3, etc. There... Read more

A:Windows XP Pro, multiple viruses, no internet explorer, access denied when trying to install display drivers

Hello,I moved this to Am I Infected from XP. Lets do these nesxt and see.For the connection try these...Please click Start > Run, type inetcpl.cpl in the runbox and press enter.Click the Connections tab and click the LAN settings option.Verify if "Use a proxy..." is checked, if so, UNcheck it and click OK/OK to exit.Now check if the internet is working again.ORGo to Start ... Run and type in cmdA dos Window will appear.Type in the dos window: netsh winsock resetClick on the enter key.Reboot your system to complete the process.Reboot into Safe Mode with Networking How to enter safe mode(XP/Vista)Using the F8 MethodRestart your computer. When the machine first starts again it will generally list some equipment that is installed in your machine, amount of memory, hard drives installed etc. At this point you should gently tap the F8 key repeatedly until you are presented with a Windows XP Advanced Options menu. Select the option for Safe Mode with Networking using the arrow keys. Then press enter on your keyboard to boot into Safe Mode. >>>> Download this file and doubleclick on it to run it. Allow the information to be merged with the registry.RKill....Download and Run RKillPlease download RKill by Grinler from one of the 4 links below and save it to your desktop.

Link 1
Link 2
Link 3
Link 4

Before we begin, you should disable your anti-malware softwares you have installed so they do not interfere RKill running as some anti-malware softwares detec... Read more

13 more replies
Answer Match 48.72%

I use w10 on 3 devices, a mid range gaming PC, linx7 tablet, and lumia640. On the whole the experience is pretty good, syncing works well, reminders, alarms, contacts etc. This was one of the reasons I opted for android early, using chrome on a PC gave a similar, yet skimmed down, one OS feel.
I've not had one BSOD since updating the 'rig', my mobile works great, and the tablet is amazing for ?49! I was talking to my father in law who uses all 3 main OSs every day, and we both agree that windows just feels more 'grown up' than iOS or android. He wants a win10 phone next to replace his android (he'll have to keep the company iPhone4).
So like I said, does anyone else have a similar experience?

A:Who else uses w10 across multiple devices?

yeah i have no probs with my Lumia 920, HP work laptop and 2 of table computers at home.

just pisses me off to have the same background on each computer and i seem not to be able to find a setting to keep that sync out

2 more replies
Answer Match 48.72%

I want to use the audio simultaneously from my ati 4550 HDMI, Sony blue-tooth speaker via usb BT dongle, 3.5mm jacks on my mobo, and also from a spdif and digital coax linked to the mobo via on board header to expansion bracket with ports.

I know this all may sound like overkill, however I don't have the funds for high end switches / replicators, etc. So manually changing them has been a hassle.

I have done some reading and I know se7en doesn't let you. I did this with xp x64.

Anyone know of a "work-around" or hack to enable all devices at once?

Intel E2140
Intel DQ965CO
4gb Kingston 667mhz
MSI r4550
Ultra MD3 Dashboard
Gyration RF MCE Universal Remote

A:USE MULTIPLE DEVICES 7 x64

From what I see, you can only have one "Default" Playback device so I doubt that what you want to do can be accomplished.

2 more replies
Answer Match 48.3%

Hi, I recently purchased a HP Pavilion dv6974 Laptop, it came installed with Vista 64-bit. It works fine and all, just one thing I want to figure out.

The laptop has built-in speakers, a built-in mic, 2 headphone jacks and 1 microphone jack. I plugged my headset into one of the headphone jacks, my headset microphone into the microphone jack, and my external speakers into the second headphone jack.

What I wish to do is to set it up in a way that I can play music through my speakers, and Ventrilo through my headset.

The way I did this before on my desktop was that there was this option in the Realtek Audio Manager called "enable playback multi-stream" that separated the two audio jacks on the computer (one in the back, and one in the front). Then I was able to choose a different audio driver for Ventrilo, and use the default one for music. This was on XP, and I only had one sound card btw.

And now for Vista, I've tried looking through the Audio Device Manager and the Realtek Audio Manager but couldn't find anything that would help much, except in the Realtek Audio Manager there's this "tie up all input jacks something something, etc" that sounded like it was what I was looking for, but all it did was mess up my microphone.

To add more to this confusion, there is actually another audio device in the Audio Device Manager, but it's the Digital Audio Receiver, and I don't really know what that does.

I've asked about this problem elsewhere, and some peopl... Read more

A:Multiple Audio Devices

Hi, ForeverRen, and welcome to the forums.

I think HP would be your best bet in this instance....as they would be able to tell you for sure if that can be done with their hardware or not.

3 more replies
Answer Match 48.3%

My system has a sound card and two USB audio devices. I can click the speaker -> options -> propertied -> mixer device and select 1 device and reboot and play via that device. However I would like to have all audio devices work at the same time. Is there a way to do this? If not, is there a way to switch without rebooting? (Windows 2000).
 

A:multiple audio devices

..................err? why do you need/want multiple audio devices from the one PC??????
 

3 more replies
Answer Match 48.3%

Ok, this isn't really pc related, but I'm sure it's an issue many of you face every day. I have a PDA/GPS, cell, bluetooth headset and blackberry. I use each every day, which means every night I have to plug all four devices in to charge. Does anyone know of some kind of charging station that would house all four power adapters neatly and allow me to charge all four devices from one outlet? Is there some kind of travel charger that would let me plug all four devices in to charge at once? Such a hassle taking all four adapters every time I travel.

Thanks
 

A:Any way to charge multiple devices at once?

7 more replies
Answer Match 48.3%

I have 2 x 24 port hubs uplinked to each other. I wish to introduce a switch.

How can I do this with the uplink ports on the hubs reserved.

Trev.
 

A:Multiple network devices

7 more replies
Answer Match 48.3%

I would like to connect a variety of wireless devices in my house to my work VPN while allowing other devices in the house access to my home network as normal.

I was hoping to find a wireless ADSL router that allows me to associate a LAN port to a VPN connection, then connect a wireless access point to that port. I could then run two wireless networks in my house, one that would connect to my work VPN and the other that would not.

Is there such a router?

If not, is there some other way of doing what I need?
 

A:Connecting multiple devices to a VPN

Sorry for the bump, but would this do the trick?
 

1 more replies
Answer Match 48.3%

hi, i'm relatively new here, so i'm not really sure how to do this but alot of my games are having problems i.e. ? has cause in invalid page fault in unknown. I am led to believe it is a soundcard problem, i use an onboard sound card with the VIA VT1612A 2-channel audio Codec and i look in multimedia properties under audio devices, i had two different ones, Audio for via Ac'97 Enhanced Audio Controller(WDM), and Audio for Vinyl AC'97 Codec Combo Driver (WDM), i was told by a friend to uninstall the drivers and then reinstall to fix this, i did, now on top of those two devices i have a second Audio for Vinyl AC'97 Codec Combo Driver (WDM). I also have three MIDI for WDM-based Device. ANd Mixer for VIA AC'97 Enhanced Audio Controller (WDM), along with two Mixer for Vinyl AC'97 Codec Combo Driver (WDM),this may be normal, but like i said i'm relatively new at this and it doesn't really look normal, so can someone please help me? Thank You
firebrand_24
 

A:need help, multiple audio devices

Look at the back of your computer. Do you have onboard sound AND a seperate PCI sound card? If so then you need to disable the onboard sound in the BIOS setup and use only the PCI sound card.

Now go to Add/Remove Programs and uninstall ALL VIA AC97, AC97, Vinyl audio drivers and anything else that looks like it goes to sound drivers.

Then go to Device Manager and uninstall/remove all remaining VIA/Vinyl/AC97 devices listed under the Multimedia heading. Reboot only after all are removed.

Then download the latest VIA Vinyl drivers. When you first run the new driver setup program it will look to see if there are still drivers installed, if it finds any then it give you the option to uninstall them. Do that and reboot.

Then run the VIA installation again and install the drivers, and reboot.

At any point Windows may redetect the sound card and want to reinstall the drivers - let it. Do NOT click Cancel on the Found New Hardware Wizard. If all goes well prior to install the latest driver the sound card should be detected as a PCI Multimedia Device and that means all the drivers will have been removed.

Here's the latest drivers: http://www.viaarena.com/Driver/Vinyl_AudioCode_v600a_M.zip
They are in a ZIP file, once extracted you need to run the SETUP.EXE file to install the drivers.
 

2 more replies
Answer Match 48.3%

Hi,

I have an ethernet connection running from a router to another room and I wonder if I could use that single connection for multiple devices (computer, game systems, etc). Will a hub work for a connection coming from a router?
Is it possible to have them all up and running simultaneously or does it have to be one device at a time?

Thanks,
~mark
 

A:Single IP, multiple devices

If it's a standard SOHO router, and not a switch or a modem, you can have up to 253 devices attached. (There are 256 addresses available, but you can't use the first or last address, and one is reserved for the gateway--the router itself.) Note that the 253 addresses includes wireless devices.

Courtney
 

3 more replies
Answer Match 48.3%

So here's the setup:

Windows Home Premium X64, 8GB Ram, I5-3570K CPU

Recently built. I understand there's been an issue with Windows 7 using different devices for audio outputs. I was told by MS IT to use Virtual Audio Cable (VAC) for 'combining' my programs/devices into the same output.

My computer is mostly built for Audio recording (Audacity, Adobe Audition), and virtual instrumentation (Reason 5, FL Studio, Abelton, etc...)

My issue is that while some of these programs work well with VAC, key important ones such as Reason 5 do not. With my particular soundcard and driver, there is a degree of latency between the time I press a note on the keyboard to when I can actually hear it.

FL Studio automatically bundles ASIO4ALL - an awesome '0 latency' driver pack that comes with a easy to use control menu. ASIO4ALL is automatically selected as the audio card driver.

However I am unable to use VAC whilst keeping the latency low at the same time.

I need some help if you please!

A:Multiple Devices - VAC not working for needs.

I have a Sonar X2 (Producer) studio. Something like your questions would be better answered on a board such as www.gearslutz.com where recording and DAW equipment is the topic of the forum.

I don't like ASIO4ALL, it can cause problems. I've had problems with trying to use it when I had a Focusrite Saffire Pro 40. I've seen other posts (on other forums) about ASIO4ALL problems.

I have a Roland Octa-Capture and an MAudio Fastrack Ultra 8R and I only use the drivers supplied by Roland and MAudio.

1 more replies
Answer Match 48.3%

I use laptop, with system speaker volume too low, almost inaudible.
It has inbuilt sigmatel HD audio, with 3.5 mm jack ( I do connect my headphone with it).
I also posses a bluetooth headset (DELL).

Is there any way I can get output to both the headsets?

I need this to watch movie, so that me and my room partner can easily listen via saperate sets fo headphone without difficulty.
 

A:using multiple sound devices

as far as i know you cannot output to two audio devices at the same time from one program unless the program alows this (eg. PCDJ)

To solve the problem you could get a 3.5mm spliter and another set of 3.5mm headphones but this would probably require a trip to an electronics shop unless you have one already.

also post what OS you are running in case someone else knows of another way.
 

3 more replies
Answer Match 48.3%

We receive Email on Desk Top, Ipad and Laptop that is repeated each time we open a computer and look at the mail . Also have two programmes on the Desk Top that again repeate the mail : Windows Live Mail and Mozilla Thunderbird. This causes untold mail and most annoying. How can I just see the mail once on either of the computers. We run Windows 7 on the Lap Top and Desk Top, the Ipad is the current model.

Hope you can assist me please, my husband and self are not very computer literate.
 

A:Email Across Multiple Devices

The closest thing would be to set them all up as IMAP instead of POP accounts. That way you get all the same email, the same deletions and moves, and the same emails marked as read across all devices. It doesn't quite prevent you from seeing the email more than once unless you move that email to another folder or delete it in which case the same thing will happen on the rest of the devices.

You would have to check with your email service to see if they support IMAP and to get the correct settings. Or post your email provider here.

Also, I changed the title of your thread from your name to something more meaningful.
 

1 more replies
Answer Match 48.3%

Windows 7 Ultimate, 64 bit. Home network. Already have 3 printer devices. One printer is All-in-One (HP). Want to keep that device installed and be able to use all functions. Want to add a desk top scanner for speed and versatility. The All-in-One is network cabled and also USB to my desktop computer. The desktop scanner is not network; would be USB to my desktop computer. I seem to recall reading somewhere (not sure of this - maybe HP literature to discourage buying other scanners) that you can't have more than one scanner. Doesn't seem logical. Is more than one scanner (using only one at any one time) OK?

A:Are Multiple Scanner Devices OK?

As far as I know you have as many usb devices hooked up to one computer. There is a theoretical limit of 124, but it really is determined on how many usb ports you have as to how many usb devices you can hook up. Each device has it's own driver/software package, so I don't see any real reason you couldn't. I know for a fact you can have a printer (all in one) and scanner hooked up at the same time. My dad did using XP, Lexmark all in one printer and an HP scanner.

4 more replies
Answer Match 48.3%

i have speakers connected to the hdmi and have a fm transmitter connected to the headphones jack. how do i get the soud to come out of both? Picture:

 

A:Sound from multiple devices

You can't have sound from both at same time - it's either one or other because the headphone jack is designed to mute the speakers when headphones are plugged into it.
 

2 more replies
Answer Match 47.88%

Slowly lost app's now have no control. Or admin privilege. The screen looks fake. There's drives listed I can't access. And every download was hijacked. Now theres no real Network or bios driver installed. after multiple attempts and no system functions available I want to use another computer and try to download virus software there. Noticed something strange happen and both laptops havea Dll bug long story short my Android, laptops, printer and router have all been hijacked and I do not know what to do at this point

I haven't seen or been able to find anything on something so expensive enedina have any other laptops that are accessible at this time so even doing it from my phone is challenging
 

More replies
Answer Match 47.88%

I'm trying to use my speakers for everything except one program. I want to use my headphones for a chat program called Ventrillo. any ideas or suggestions?
 

A:Trying to use multiple audio output devices

I've tried just about everything I could think of and still nothing. Tried changing audio output settings on everything and still cant figure it out. Anyone know if its even possible?
 

1 more replies
Answer Match 47.88%

OK,
So on my home network, we have your normal cable modem, router, and gigabit switch setup. The router is a high speed linksys model (gigabit), and the gigabit switch is an 8 port. The ethernet goes all through the house, but I've recently built a media room. In this room I have a Zensonic High-def network dvd player for streaming media, a gaming/media pc, an xbox 360, ps3, modded xbox 1 for more media streaming and a wii. The wii isn't really relevant to the problem because it is wifi, but I'm proud of my media room.

The problem was that I needed to network all of these, and when the house was built, we only ran one ethernet port into the room. No big deal I thought, because as long as I'm just streaming media, a 10/100 switch would be sufficient. So I pulled out an old hub (not a switch). All of these devices were hooked up and it worked great. Then one day, it all just stopped. The hub was old, so I ran out and got a netgear fs605 switch on sale for 5 bucks at office depot. This still hasn't fixed the problem, but has helped me diagnose it. When I plug in the uplink, I get a blinking response. When I plug in the next device, it works and is recognized. However, every device after that causes the switch to stop working and just start blinking. No activity, it looks like an error code of some kind. Have I put too much on this little switch? It was working just fine for months on just a hub. Any thoughts?

Thanks
 

A:Network switch cannot allow multiple devices!

6 more replies
Answer Match 47.88%

I'm not entirely sure if this is a Windows Sound issue or a hardware issue, so I'm asking this question both here and in a Windows Community Forum. Is it possible to output audio to multiple devices (i. e., can one assign more than one "Default Device")?  For example, can I output to the USB-S/P-Dif device connected to my stereo and the bluetooth device driving my outdoor speakers simultaneously? I have an Envy dv7-7255dx, with the IDT Hi-Def audio codec, running 64-bit Windows 10 Home. Thanks!

More replies
Answer Match 47.88%

Right now I have my computer hooked up to two sets of I/O devices (mouse, keyboard, monitor) and I was wondering if you can separate them so that for example I can surf the web on one set and have a friend play a game on the other. Currently they show and control the same things.

Both monitors are on the same graphics card, one mouse/keyboard is USB the other PS/2

Thanks for any help.

A:Using multiple input devices on one Computer

Nope, there is only one console manager. Since you already have the monitor and keyboard, why not find a cheap machine and just have two?

1 more replies
Answer Match 47.88%

Is it possible to connect the ac511 to multiple devices?

A:connect ac511 to multiple devices?

The AC511 is USB Sound. Answer is no not ever.
So there is no splitting.  It cannot be attached to multiple usb ports.

5 more replies
Answer Match 47.88%

So my household needs to upgrade internet. Our internet speeds are slow (3mbps) and my mom works at home with various computer programs as she processes documents and claims.She cannot deal with the lag in her internet speed caused by my brother playing his new xbox one (which I've heard takes up the internet like no other) and me browsing the net all at once.

I'm asking because I don't know about internet speeds, our current plan in our area is the best one (I know 3mbps is not alot) but apparently that is the highest service AT&T U-verse provides.

So I'm wondering if anyone knows what would be a good speed for internet considering all of this, it know this isn't exactly a computer problem but I wouldn't know where else to ask.

Thank you for your help!
 

A:Would 5mbps be enough to support multiple devices?

Hi 12FindersKeepers,

12FindersKeepers said:

So I'm wondering if anyone knows what would be a good speed for internet considering all of this, it know this isn't exactly a computer problem but I wouldn't know where else to ask.Click to expand...

No problem, this is the right section to ask in.

Now I'm a bit confused as to whether your potential Internet speed would be 3Mbps or 5Mbps (conflicting information in title and post). Either way, you're right that that isn't very much bandwidth. Your mom should be able to do her computer work assuming the file transfers she performs involve smaller Word, PDF, and text documents. The primary factors here will be what you do while web browsing, and the Xbox One connection.

You likely won't be able to play Xbox and stream video well simultaneously - that isn't even taking into account possible file transfers of your mom's.

I'm not sure where you live, but most developed areas in the United States have Internet speeds much higher than this. I recommend doing some research online to find out if this truly is your only option. With modern Internet content, I would say ~10Mbps is a good minimum recommendation for a pleasant browsing experience.

If you cannot find/get an Internet connection with increased bandwidth, then you all may need to dedicate times for certain activities on the Internet.
 

7 more replies
Answer Match 47.88%

I've googled this endlessly with no result and I'm guessing it isn't possible but I may as well ask.

My laptop has one audio/mic port. I'm cheap and had a splitter laying around, my headphones, and a set of ear buds with a mic on it I combined to use as a headset.

This works fine, however, since the sound output is being split to both my ear buds and headphones, it doesn't sound as good and some things are faint, which isn't good for gaming.

Is there a way to manage my audio devices so that my ear buds is mic only and no sound, and my headphones get all the sound? I've found no options in Windows, just playback (speakers) and recording (mic). I assume because it's only one jack it isn't, but it can't hurt to ask.

More replies
Answer Match 47.88%

New box is together. Windows 8.1 64-bit.

When I look at my drives in file explorer, a couple drives have multiple drive letters...

For example, my data backup drive, which is only one partition, shows up as drive "Int data backup (T(T(T" - unfortunately, it keeps changing the colon and closing parentheses to that goofy smiley face.

Same for a couple others... I've never seen this before in Windows 7, so what is this? Do I need to do something about it?

---------------

Also, in "Devices and Printers" from the control panel, I have FOUR occurrences of "DIRECTV2PC Media Server" and FOUR occurrences of "DIRECTV Mediashare Renderer"

Do they have anything to do with the multiple drive letters? What the heck are they for? And can I delete them?

A:Multiple drive letters and odd devices

It appears your PC is connected to a media Share network

5 more replies
Answer Match 47.88%

I have a dell dimension 2400 that I think is going kaput. I've had to format one drive twice and an alternate drive once (merely to test that the first hard drive wasn't the issue.) My primary problem and reason for my first reinstall was an OS hanging issue probably due to some hardware conflict somewhere - various solutions such as safe mode, repairing install and fixboot would not work (scared to use fixmbr without first checking all my options.)

Three soft formats later and both of my hard drive installs are ticking my ethernet adapter, among other devices, with a question mark. As an example, I've used the OEM disks provided for the 3com 4011 integrated ethernet controller, selected the appropriate driver and ended up with a code 10 on it. I boot to safe made and check all the hidden devices for obvious conflicts but no such luck, there are no other NICs installed on my PC and the rest cannot be removed ("you need this device to boot" message on uninstall attempt")

Does anyone know where I can find out which resources my device wants to use?
quick edit: it is XP
could it be a ghost device driver sucking up resources from a previous install?

question the third: HAAALP! according to the utility partition manager my system is in full working order (ha.)

many thanks for your gratuitous help.
 

A:Solved: Code 10 multiple devices...

I'm adding an everest report of the hardware for your viewing pleasure.

it can be viewed here:

http://www.mediafire.com/?nlg3yiyy12g
 

2 more replies
Answer Match 47.88%

I seem to have a bug in the USB drivers or such that I need help with analyzing. I have tried deleting the USB drivers and letting the system update the driver. I am rather a newbie at system diagnostics but somewhat proficient at computers so hopefully with your help I can iron this problem out. Thanks very much ahead of time

HP dm4 laptop
Intel i5
4GB RAM
Toshiba 500GB HD

A:multiple BSOD USB bugcode USB devices not being used

You have both Norton Internet Security and AVG installed. Please remove one or the other and see if your system is then stable.
AVG Remover

Norton Removal ToolHaving two security programs that accomplish the same tasks can cause conflicts/freezes/hangs/crashes/etc. due to them using the same system resources simultaneously. If you had tried to remove one prior to installing the other, it may be that remnants remain and you should contact support for that product to get it properly removed now.

3 more replies
Answer Match 47.88%

Why do I have so many "base system devices" can I safely delete them ?

A:Multiple Base System Devices, why ?

first, we need to know your system specs, follow this tutorial

Second, why are you posting a Win 8 issue in sevenforums when there is eightforums?

9 more replies
Answer Match 47.88%

I realize this is a forum for Windows 7, but I don't know where else to ask this question lol.

Earlier I made a thread about my mom's computer being unable to reinstall Windows 7 after a factory reset. I think I've found a possible fix for this, but I'm not entirely sure.

I'm currently in the process of installing Windows 10 on my own computer via the Windows Creation Tool, and I noticed that it gave me the option to not only install W10 on my own computer, but another's through a Flash Drive as well.

So my question: after I've installed Windows 10 on my own computer, would it be possible to also put a copy onto my flash drive to install Windows 10 on my mom's computer as well? And if so, can I bypass the product key requirement to get to the desktop? I've got some code that I used to grab my own product key in order to install Windows 10 for myself, which I can also use to retrieve my mom's product key if I can get to her desktop to open Notepad.

I've never booted a computer via flash drive, so I don't know whether or not I can do this. I don't have her product key, and I can only get it if I can access her desktop (unless there's another way, because the product key on the back of her laptop is too faded to read).

Thanks in advance!

A:Installing Windows 10 on Multiple Devices?

Once you've made an install flash drive (or DVD or iso) from the Microsoft site, you can use it to upgrade any number of qualifying computers (genuine activated Windows 7 SP1) to Windows 10 without needing a serial. It must be the correct edition ie Windows 7 Home Premium needs a Windows 10 Home flash drive. A sneaky upgrade attempt from Home to Pro will appear to work, but won't activate (you will prob be nagged to buy the correct serial sometime in the future).

https://www.microsoft.com/en-us/soft...load/windows10

re : booting from flash - I found that the upgrade didn't work in that scenario. I had to run setup.exe from within Windows 7. If a clean install is your goal, once Windows 10 is installed, you can boot from the install media (flash, DVD etc) and install again, deleting all partitions. You don't need a serial for this, because MS 'remembers' the hardware and activates it accordingly. If you do this, all data and apps are deleted.

Edit - if your mom's computer isn't actually running, you won't be able to upgrade it to W10 for free.

9 more replies
Answer Match 47.88%

Under XP, when I played an MP3 it would come out of my headphones and my SPDIF port to my AMP at the same time. Under vista I seem to have to choose and keep changing them manually (setting one as default) . Also, when I change them, it doesn't seem to take effect till I restart that application, mp3 player, movie player or whatever.

I seem to have similar issues with mic vs line-in. and switching between them doesn't always seem to work if in use and Mute options also seem to not kick in.

I read some scare stories about DRM but I'm not sure that this is relevent or not .

In XP, this just worked. sound would go into the IN's and come out of the OUTs and could be muted where needed. Does this work differently now?

More replies
Answer Match 47.88%

I have an Xbox One, Windows Phone, and Windows 10 laptop. I have Hey Cortana enabled on all of them. I use it all the time on Xbox to control my tv volume and channel. I use it while I'm driving on my phone. I don't use it that often on my laptop, but sometimes I will use it to change songs or something while I am working. The point is, I have fairly justifiable reasons to have it enabled on 3 devices.
So lets say I'm watching football. I have my fantasy stuff up on my laptop, and my phone is near bye because its always there. I decide I want to mute the TV, so I say "Hey Cortana, Mute". The result? My Tv mutes, my phone and my laptop both tell me that they cant perform that function. I do that same with volume up? Same result.
Later, I say "Hey Cortana, call Wife". The result? My Xbox and TV either try to open Skype or give me an error while my phone calls my wife.
So year, having the same "Hey Cortana" voice commands for 3 devices was a poor idea. "Xbox, Mute" worked fine. I mean, I do feel like Cortana does a better job of understanding what I am telling it to do, but couldn't it have stayed as Xbox commands rather than Hey Cortana? I could just turn it off on my laptop and be happy with it, but I actually use it for my phone and my xbox.
Imagine when people actually start buying Surface Phones (if that ever happens). What were they thinking?

A:Hey Cortana... multiple devices... what were they thinking?

Lucky sod, we have three Xbox Ones, two PC's two Surfaces and three Cortana enabled Windows phones in our flat, we have discovered the meaning behind the phrase "She who's name must not be spoken"

3 more replies
Answer Match 47.88%

Does anyone know if Windows 8 will intergrate multiple output devices to play at the same time? Windows 7 doesn't do it... which is stupid. Pirates will always find a way to bypass this, but I'm stuck without this important feature!!! This is absolutely CRUCIAL for HTPC (home theatre PC) people and/or DJ's or Music producers / Artists. I also use audio levelers like SRS audio essentials which is considered another audio playback device. This is truly ridiculous that I paid all of this money for Windows 7 and I can't play to 2 sets of speakers at the same time. And if I want to switch to headphones for a second for any particular reason, i have to go through a process... and make it the default device and when I want to go back to watching tv I have to go through the process again...... SO ANNOYING..... it's my computer, I should be able to play to ALLLLLLLL of my devices. That's why I buy all these devices so I can use them all simultaneously. This is so basic. Can you please update Windows 7 with multiple playback on all devices. I don't copyright infringe or rip dvd's to external sources, but even if I was a shady individual, which I'm NOT, I don't need multiple playback device to do this. You're only hurting ME, the consumer that pays for things I use. It's MADDENING. PLEASE UPDATE YOUR PLAYBACK DEVICES TO INCLUDE SIMULTANEOUS OUTPUT PLAYBACK TO ALL DEVICES.... OR AT LEAST SEVERAL... I mean really... for this stage of technology, this is totally ridiculous.

A:Playback Devices - Multiple Outputs

better to ask this question here
Windows 8 Forums

The people frequenting there have more direct experience with windows 8 than the average user here.

7 more replies
Answer Match 47.46%

I am using Access 2010 and Excel 2010. I need to have VB script to export the access table 502 records by 38 fields into Multiple Excel workbooks each having multiple tabs. In the Access table each record has two fields: Div and Tab that will be used to name each workbook and each tab (sheet). There are 6 unique "Div"'s to name the 6 workbooks and there are several "Tab" names for each Div (workbook).

Note: These 6 workbooks with multiple tabs were orignally imported into Access from one common folder on my desktop by this routine.

Option Compare Database
Option Explicit
Private Sub Command1_Click()
Dim blnHasFieldNames As Boolean, blnEXCEL As Boolean, blnReadOnly As Boolean
Dim lngCount As Long
Dim objExcel As Object, objWorkbook As Object
Dim colWorksheets As Collection
Dim strPath As String, strTable As String
Dim strFile As String
Dim strPAF As String
Dim strPassword As String
' Establish an EXCEL application object
' On Error Resume Next
' Set objExcel = GetObject(, "Excel.Application")
' If Err.Number <> 0 Then
' Set objExcel = CreateObject("Excel.Application")
' blnEXCEL = True
' End If
' Err.Clear
' On Error GoTo 0
' Change this next line to True if the first row in EXCEL worksheet
' has field names
blnHasFieldNames = True
' Replace C:\Filename.xls with the actual path and filename
Baseline\test3\"
strPath = Me.myFileName
strFile = Dir(strPath & &q... Read more

A:Solved: Export Access table to multiple excel workbooks with multiple tabs

10 more replies
Answer Match 47.46%

Hello, everyone.

I noticed a problem in my keyboard recently, but i'm not sure if it's really on the keyboard, and might be in the windows or software related. The problem is that the keyboard randomly starts freezing, it's hard to explain with words, basically the keys do not operate in the way they should, i notice this problem usually when i'm playing games, where my "W" that should move my character forward continuously. does not, instead of doing what it's supposed to do my character goes forward while freezing along the way. When i unplug, and plug it again on the USB port, even on a different one, the keybord start to operate normally again, but randomly shows this problem from time to time. It's not only with the "W" key, was just an example.

I noticed something yesterday, i don't if it's supposed to be that way, and i can't find any information about, it's that on device manager it shows multiple devices on the keyboard section, when the device is connected, as it shows in the image below:

One more thing, is all of them looks like the same thing, but i'm not sure if they really are, image below:

If i uninstall all of them, except that one that i marked with purple, he is the 4th one in the first image, the keyboard still operates, i'm not sure if the problem is fixed by that, cause it does not happen all the time.

Now that i described everything, i want to ask 2 questions:

1) Showing these multiple devices is normal? Cause i plugged anot... Read more

More replies
Answer Match 47.46%

Hey guys!
I've got an HTC One X, an ASUS Transformer and several Windows PCs that I use for business. Depending on my location I receive googletalk messages on any of those devices.
What I need is a software, like Trillian, that will save the chat history of my conversations online to enable me to access it from any device I choose. I don't want to check all devices if I wonder what a colleague wrote to me in the morning.
The problem with Trillian is, that it isn't optimized for the Transformer or any Pad in that regard at all (correct me if I am wrong). It forces me to turn the screen to "vertical mode" which isn't helpfull at all since the Transformer is in "horizontal mode", because of the attached keyboard all the time.
I would really appreciate your help and advice. To be clear: I am totally willing to pay money for such a software, but I don't even find one single alternative to Trillian.
Thanks in advance
Madelaine
 

More replies
Answer Match 47.46%

Hello.
Sometimes I watch movies using HDMI output from my computer. When I connect the HDMI cable windows also discovers new sound device. I want to redirect some of outputs to the television so I can use its speakers.
For now, what I do is that I disable the internal sound card and system automatically uses HDMI then.
Thank you for any help

A:Assign applications to multiple sound devices

In many systems, when you plug an HDMI cable into the PC Windows will automatically set the HDMI as the Default audio playback device. If Windows is detecting a new device it suggests the Video drivers (usually where the HDMI audio is generated) may not be the correct driver.

1 more replies
Answer Match 47.46%

Hi guys. I have my TV connected via HDMI through my video card to my computer and also run sound through my computers speakers with the onboard sound. Normally I just change the audio device before opening a program depending on whether I want it on the TV speakers or computer speakers. The problem is that sporadically when I select the device for the TV speakers it doesn't provide any sound and no combination of turning the TV on and off, changing the audio device back and forth etc will let give sound on the TV speakers (but when i change to the computer speakers it works fine). I can't seem to reproduce the problem either, it just happens sporadically and the only solution is to restart the computer.

I have vista 32 bit ultimate. Any suggestions?

More replies
Answer Match 47.46%

Good Afternoon,

The small office where I work has 1 wired desktop, 1 desktop connected over wireless, 2 laptops connected over wireless and two iphones that are always connected to the internet. Until about 12:45 pm EST the wireless internet was working fine, at that time the wireless went down. However, the wired desktop has had no trouble connecting to the internet. Please help, we need to be up and running and our IT guy has disappeared off the face of the earth! Thank you!

The router is a Cisco WRVS4400N. It is one MacBook Pro, a Toshiba Laptop and a Dell desktop that is connected by D-Link DWA-131. Its a Comcast X-Finity 56 MBPS connection. (we're really close to an airbase).
 

A:Connection Problem - Multiple Devices over Wireless

Reset or power cycle the router. Can you still detect the wireless network? If so, can you connect to it? If so, can you communicate with the router via wireless?
 

1 more replies
Answer Match 47.46%

I have a 20FB running Win 10 with a Logitech K810 Bluetooth keyboard that I've been using with a corded mouse without any problems. I recently purchased M557 Bluetooth mouse and now, intermittently, but consistently, my keyboard stokes are inaccurate, with multiple repeating letters and extra spaces. If I turn my mouse off, the keyboard again works fine. Disconnecting and reconnecting both devices did not solve this problem. The Lenovo System Update utlility indicates that the device driver is up to date. The Lenovo supplied device driver version is 18.1.1546.2762. Nonetheless, I was able to solve this problem by updating the device driver from Window?s Device Manager to Intel?s latest driver, version 19.0.1621.3340.  

More replies
Answer Match 47.46%

Hello there
I am having major issues at the moment and have been trying to fix this for the past couple of months.
my primary laptop a Tobisha was playing up a while ago when I plugged my apple iphone into it and was transferring photo's, it was taking ages to respond and then came up with error corrupt image.
I tried again and it said the file was already there and if i would like to replace it? I saw the file size and it was 100 X bigger than all the others.
I got a little concerned and downloaded malwarebites to scan my computer (I had avg already installed and nortorns).
as time went on and a little bit of research online and fiddling about, the virus was not budging and had locked me out of admin rights.
I tried take ownership, downloading various programs to run and it kept overtaking the programs until i couldn't delete any files anymore.
I found an old laptop dell and tried to fix that one up (as that too had a virus)
I ran malwarebites on it and it removed somethings and i was able to get it going.
I was using an exeternal hard drive to back up my files from the tobisha and wanted to transfer them to the dell
when i noticed i lost admin rights on the dell also.
at this point too I was having strange things happen to my iphone, background app transfers and greyed out features with location services always on.
I tried deleting a heap of things on the dell after running some programs, it seems it now had the same thing as the other laptop.
I gave up trying to fix anythi... Read more

More replies
Answer Match 47.46%

Hello,

I'll try to explain this as simply as possible... Currently, I have speakers, headphones and the headphone microphone plugged in. I'd like to record my Skype conversations using stereo mix, but stereo mix only picks up what goes through my speakers and not what goes through my headset. I've tried tinkering with the settings and haven't been able to get stereo mix to record what goes through my headset instead of my speakers.
How do I get stereo mix to record headphone audio instead of speaker audio?

For the past few hours, I've also been trying to get Audacity to record both stereo mix and my microphone. From what I've read, Audacity can't record two inputs at the same time, so is there a way to combine stereo mix and my microphone?

I'm using the latest Realtek HD drivers, if that helps any.

Thanks for your time.

A:Multiple audio devices, stereo mix and a microphone

You might want to check out VAC(Virtual Audio Cable). It is not a "free" program, so depending on you needs, it might help. here is a link to info about it:Virtual Audio Cable - Wikipedia, the free encyclopedia
and here is a link to download VAC:
Virtual Audio Cable - CNET Download.com

I used it myself to share music I was listening to over video chats. The program can be used in a number of ways. I no longer use, since I currently have a laptop with Stereo Mix, and that meets my needs just fine. Hope this helps.

1 more replies
Answer Match 47.46%

When streaming Netflix, my computer is registering as a new device each time I play a movie. The Device ID is different when I check on all my registered devices (the only device that uses my account is my one computer). I have not changed any settings, reinstalled Windows, or made any drastic changes in the system. I do not use a router and am using Cox Communications as my ISP.

Does anyone know why this is happening? Does anyone have a solution?

For more detailed information, the original topic is posted here:

http://www.bleepingcomputer.com/forums/topic375957.html

I was informed by the admin "Animal" to re-post in this forum.

Thank you for any help.

A:Netflix-Computer Registering as Multiple Devices

Have you contacted Netflix about this issue?

1 more replies
Answer Match 47.46%

I am using Windows XP,HomeEdition Version 2002, Service Pack 3.
AMD Athlon 64 X2 Dual Core Processor 3800+ 2.00 GHz, 3.43 GB of Ram
Firefox version 22.0.
 
We have noticed recently slow speed on our PC, Cell phones, laptop all connected to our wifi.
 
On this pc we have a search site called mysearchresults.com show up whenever we open a new tab.  There also an ASK.com search bar and a search bar that has the icon of the mysearchresults.com site.   Occasionally we get a small window pop up in the lower right corner ( where the taskbar is) that will play a video commercial.
This is also new, within that last few months these two things have started.
 
We notice alot more pop ups while on you tube, the video is jumpy while trying to scroll to the bottom of the page.  When you go to click on a link it seems to move forcing you to click on a pop up. 
 
I tested at speedtest.net and got a ping of 245, download speed of .19 and upload of .42.  I've been noticing a lot of 404 issues (im not sure what you call it...it says it cannot find where I wanted to go and leaves me at a search bar that says its powered by Bing.  (http://us.search.yahoo.com/404handler?src=toolbar&fr=slv502-tyc&type=&url=http%3A%2F%2Fwww.google.com%2F)
 
Mostly though we get...
 
Server not found
  Firefox can't find the server at att.yahoo.com.
 Check the address for typing errors such as
    ww.example.com inst... Read more

A:Multiple problems and slow speed on different devices

One computer per topic please.  Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result. Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop.* Double-click mbam-setup.exe and follow the prompts to install the program.* At the end, be sure a checkmark is pl... Read more

11 more replies
Answer Match 47.46%

A big hello to everyone. This is my second time coming here, albeit with a different problem, and one that is a lot more annoying!
 
A week or so ago i starting getting occasional redirects and popups to pages that start with "syndication.exoclick" whenever I browsed the Internet with Google Chrome. I cleaned it (deleted all browsing data, signed out of the browser and back on) and it was fine for a day or two. As of today, the problem has gotten much worse. I keep constant redirections to pages starting with "adfoc.us" - over half of the tabs I open are immediately taken over and redirected. Worst part is that it now works on Internet Explorer as well. It is also worth mentioning that I am not getting these redirects only on my desktop, but also on my Nexus tablet as well. The problem seems unconnected to my router, as today I've used my tablet on a completely different Wi-Fi half across town, while still getting the problem. I've ran TDSS cleaner, the Microsoft Security Essantials, Malwarebytes AntiMalware, which all reported 0 problems. I've also reinstalled Chrome, to no effect. 
As for the redirects, they ranged from Aliexpress to random cam sites, but now the adfoc.us started showing up, it only displays the adfoc.us page detailing how the system works (with a really annoying voiceover too) and nothing else. It doesn't even allow me the option to press the "Back" arrow, seems like it literally closes a tab I wanted to open and opens a new one with adfoc.us on ... Read more

A:Constant redirections on multiple browsers/devices

Here's the Attach.txt as well. I forgot to click the "Attach this File" button. >.>

4 more replies
Answer Match 47.46%

This is so odd. I'm running Windows XP SP2 on Dual core INtel with 1 gb memory.

I've installed a front USB panel that has 4 ports in front and 2 more on the PCI card which it's attached to. (added on peripheral).

I can deal with the "this device can run faster if plugged into a 2.0 device" but what is really frustrating is that if I plug in 2 or more USB devices. At least one of them won't work.

This computer is in my family room and wirelessy networked to my other computer in another room. I use a Motorola USB device to connect for the purpose of printing stuff off the printer in the other room.

If I have too many USB devices plugged in - there doesn't seem to be enough power to allow the wireless connection - resulting in not being able to print.

This isn't the only issue. I have some software that requires the USB "key" in order to work. If I need to use that software using the "key" and then I need to print something from that particular software to the remote printer - I have to save it to my desktop firsti - then disconnect the "key" and then I can print.

Do I need a bigger PS? I have a 500W now. I thought that would be big enough. Perhaps the USB issue isn't related to that at all? Is there some way to regulate how much power is assigned to USB devices?

Since my computer is in a desk against a wall - it's very difficult to plug and unplug stuff into the rear slots. Hence the install... Read more

A:Loss of power when plugging in multiple USB devices

16 more replies
Answer Match 47.46%

I have been using Netflix for a few months. What I have noticed is that I will reach my device activation limit (6 is the max, I believe) rather quickly--specifically, it will tell me I have reached it after streaming 6 shows/movies. Apparently, my computer is being registered as a new device every time I stream a new show/movie.

I am wondering why this is, and how it can be fixed. The only solution I have found is to deactivate every device I have registered with Netflix (which is just my one computer I use for streaming)--only then will it allow me to watch another show/movie. This is a hassle, and if this is the only way, then that is alright. What I am most interested in is the reason my computer could be registering as separate devices like this. I can think of a few possibilities:
-Computer is registering by a dynamic IP address set by the ISP (I do not use a router)
-Computer is registering as a new device by some other means
-Silverlight is somehow acting fishy (which this does not seem like a local problem like a program on my computer)

It must be noted that the device ID number listed on Netflix is different with each registration of a new device (even though it is the same device every time).

I am currently in Louisiana. I am using Cox Communications as an ISP. I do not use a router. I pay my own utilities (so this is not an aprt complex-specific problem as far as I can tell). This same issue occurred when streaming on a friend's Netflix account, so it is no... Read more

A:Netflix-Computer is Registering as Multiple Devices

Should I re-post this in another forum that is more populated or that deals with problems like this?

Any help is welcomed.

5 more replies
Answer Match 47.46%

So I'll try to keep this short.

I have a HP B209a-m that I have just gotten rid of and now am trying to remove all the software from my system. I've run revo and the issue still persists.

It gives me a device install path of ROOT\MULTIFUNCTION\xxx where xxx is a number. I have about 20-30 of these instances in my device manager and all have different install paths. I'd really like to remove these. I've run the HP L4 Uninstaller multiple times and still the issue is here.

I'd just really like to remove HP from my life.

Thanks for the help.

A:Multiple devices listed as Unknown, all the same printer

hello and welcome entfy mate try first backing up the registry Registry - Backup and Restore

See my pic AFTER you have backed up that registry but please do that the very first thing I usually make two copies in say the desktop and a document.
Let us know what if any HP software is there you can also check that entry named Printers.

1 more replies
Answer Match 47.46%

Is there a script to run remotely that will return sleep setting results for multiple pc's on a network? I know we can manually check each PC but was wondering if there was a faster and easier way.


Thanks

A:verifying sleep settings on multiple devices

Hi and Welcome to TSF!

Are people changing them?

How would you want to distribute the patch?

You can do so with a simple batch program.

1 more replies
Answer Match 47.46%

Ok im not quite sure where this question should be posted but i noticed the problem when i was playin games so this is where i chose...

Basically i've got different sounds coming from my speakers and my headphones. I have teamspeak coming through my headphones but my game sounds and other sounds from the speakers. I cant seem to find a way to make them all come from the headphones.
Using windows 7 32 bit

Thanks in advance
 

A:Sounds coming from multiple audio devices

Have you tried changing any settings within the Windows Sound panel?

Start > Control Panel >Sound > Playback tab

Look for Speakers...right-click and Disable
Look for the Headphones....right-click and Set as Default Device
 

2 more replies
Answer Match 46.62%

Hello,

Switched over the internet service provider to Time Warner. We are using the same router we have used before the switch (which was also with Time Warner service provider) and everything was working FINE before the switch. But now, with the new modem from service provider something is wrong -- My roommate is unable to connect her laptop, and her phone to the wifi even though the network is being detected. I can only connect to my laptop, which was the laptop I had opened to verify connectivity when the Technician was there. Also, my I-phone is unable to connect to the network even though it detects it. It's very odd considering we had the technician come out to resolve this issue in the first place. Could it be that the DHCP server has been turned off, so it's allowing only one device to connect to the one IP address on the modem?
Or do we need to delete the wifi networks off of our computers and other devices? My roommate tried that on her devices and still didn't connect. Please help.
 

A:Unable to connect multiple devices to home wifi

Do you know if your new modem includes WiFi? Is so, when you tested the connection with the technician present, did they have you connect wirelessly to your existing wireless router or to the modem itself?

Assuming you are running some version of Windows on the computer that can connect, please go into the Windows DOS/Command prompt screen and run an IPCONFIG /ALL command. Then copy and paste the complete results of the command here.
 

1 more replies
Answer Match 46.62%

Hello, two days ago suddenly my Internet wireless connection stopped working. No Internet at all. After some research, it turned out that it was (and still is) working on one device (the iMac I am typing this message on), but has completely shut down for the other devices, for example iPads, a laptop, etc.

So far, I have unplugged the power of the wireless router, turned it back on after giving it a rest, pressed the WBS button, but there has been no progress. The connectivity is obviously up and running based on the one device. What actions should I take? Thank you in advance.

A:Wireless Connection Stopped Working for Multiple Devices

Make model of the router. If you plug laptop in via a cable can you connect, can devices see the router and what happens when you try and connect ie error message note if you have done a factory reset the password for wireless will go back to default or wireless could be disabled. Can you login to the router and confirm the wireless is active

2 more replies
Answer Match 46.62%

I'm trying to set up something at work and am looking for ideas. I'm trying to get multiple Roku devices to connect to a single computer which can then take control of them all (about 10 devices per computer). I'm thinking about something simmer to PuTTY where you can just connect to the devices and they will show up on different windows and from there you can take over control. No idea if there is any hardware/software that will be able to do something like this. Does anyone have any ideas?

More replies
Answer Match 46.62%

Hi, I very much want to know the answer to this problem. My setup is simple. I am working with my Mobo's onboard sound card (Mobo is Asus M3A32-MVP Wi-Fi) and here's the thing. I see multiple devices in both Vista and Seven (have a dual boot) - I see the front headphone jack, the SPDIF, the rear audio port (it's 5.1 surround) and also an HDMI. I've just recently bought two bluetooth headphones and I have paired them and see them in the audio devices panel too.

Now this is what I want to do. I want to hear the audio on all the devices simultaneously. If I turn on the audio system (connected to the SPDIF) then I should hear the audio there. If I connect multiple Bluetooth headphones, I should hear the audio from my comp on any and all of them.

So, why can't I do this? Apparently this was the default behaviour for Windows in XP. That is, any audio played was available on all connected devices. Now, here in Vista and Seven we have a major downgrade in that we have to select a SINGLE audio output device as the "default" device and when a device is selected as such, the audio stream is SOLELY passed into it. THIS IS SO VERY WRONG! It is so illogical to do something like this in today's world of changing and evolving multi-media environments. I mean, what if my Mom wants to hear my music from the kitchen at the same time that I'm listening to it as I work on my desktop. She should be able to simply plugin and start listening to what I'm hearing! This is RIDICULOUS!

I ho... Read more

More replies