Tech Problem Aggregator

No Audio after installing Windows 7

Q: No Audio after installing Windows 7

I have installed Windows 7 Ultimate on my computer after reformatting it.
The installation is successful but there is no Audio.
When i click on the properties of the Sound & Audio,
the error says: "Cannot start this device. Code 10".

I have tried to update it through Windows update, but there is no update for the audio driver,
it always says 'Your Audio Driver is Up to Date'.

I have manually tried to download and install the Audio Realtek HD sound Driver,
Still does not work.

Please Help!!

A: No Audio after installing Windows 7

Let's make sure that your playback devices are enabled.

Right-click the speaker icon on your taskbar > Select 'Playback Devices'
In the empty space, Right-click and select both 'Show Disconnected/Disabled Devices'
Do you see icons for your speakers and headphones now? You may need to enable both of these.


You can also try the troubleshooter to discover any connection issues that may exist, instructions are below:


Click 'Start' > Select 'Control Panel'
Type troubleshooting in the top-right search field > Select 'Troubleshooting'
Click 'Hardware and Sound' > Select 'Playing Audio'

4 more replies
Answer Match 48.72%

Background: A little while ago, the audio on my Windows XP Pro SP2 system
stopped working. I was using the on-board audio card and never had a problem
before. Then, the audio device just wasn't recognized by windows anymore.
When I went to the "Sounds and Audio Devices Properties" window from the
Control Panel, it would tell me that no audio device was detected. Looking
in the Device Manager, however, under the "Sound, Video and Game Controllers"
section, all drivers were installed properly, with no IRQ conflicts, and no
yellow exclamation points on any of the sound devices or codecs. I also
verified that my speakers were working on another system, obviously, and
ensured that the audio card was enabled in my motherboard's BIOS. I
downloaded the latest drivers for my motherboard (and on-board audio card),
uninstalled and successfully re-installed those drivers multiple times.
Still no sound! I even went out and bought a new PCI audio card, installed
it, downloaded and installed the latest drivers for it. STILL no luck. This
is when I really began to scratch my head.

Next, I tried a to do a non-destructive "Repair" of Windows using that
option from the Windows XP setup CD. I got errors doing that , and I gave up
after several attempts. Finally, on a cloned backup hard drive, I
re-installed Windows completely. Lo and behold, the audio worked fine!

This leads me to believe that some part of the Windows XP audio "su... Read more

More replies
Answer Match 48.72%

This issue occurs with unit with skylake processor.(Eg: HP ProBook 430, 440, 450, 470 G3) Please follow  these steps to try resolve the issue :  1.Disable Intel Smart Sound (ISST) option in BIOS before installing Windows 7. 2. Restart the unit  3. Uninstall the unknown device from Device Manager. 4. Restart it once again.  

More replies
Answer Match 48.72%

Hi,

I am really hoping if someone could help me with this issue that I am facing ever since I installed Windows 7 Ultimate (32 Bit).
I was using Windows XP Home edition prior to this.
After the installation of Windows 7, I saw in the Device Manager under the section "Sound" : Multimedia Audio Controller. This also had a yellow exclamation mark.

On my desktop, on the bottom right hand corner, if I click on the speaker icon (It has a red cross on it), it says "No audio devices are installed".

I have integrated sound card.

Can someone please tell me how to check what sound drivers I need and from where to install it?

I would really appreciate the help.

A:No audio after installing Windows 7 Ultimate

You find your driver at the mfgr's website.

Tell us what hardware you have and we can be helpful.

9 more replies
Answer Match 48.72%

I recently installed Windows 7 on my HP Pavilion dv2000 notebook. I did this without noticing it was muted. Now I have no audio. I have tried downloading a variety of vista compatible Conexant High-Definition Audio drivers and as yet none have worked.

The audio icon in my taskbar has a red circle with a white cross in it. When I try to install the latest driver through windows task manager it says I have the latest one. When I do a windows update I get no difference. Not really sure what I should do now. I'm out of ideas. Help? Please?

A:HP Audio isn't working after installing Windows 7

Have you tried downloading the dirvers from the HP website? I had to do that in the past..?

Select software and drivers HP Pavilion dv2000 CTO Notebook PC - HP Customer Care (United States - English)

2 more replies
Answer Match 48.72%

I re-installed windows and my speakers no longer work, I have been told by friends i need to install sound cards, drivers, etc. But I dont have a clue on exactly waht to download and where to download it from. Any help will be appreciated. Thanks in advance


Additional Imformation

OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name K-C8070B56C99D4
System Manufacturer AOPEN_
System Model AWRDACPI
System Type X86-based PC
Processor x86 Family 6 Model 10 Stepping 0 AuthenticAMD ~1470 Mhz
BIOS Version/Date Phoenix/Award Technologies, LTD 6.00 PG, 11/22/2004
SMBIOS Version 2.3
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name K-C8070B56C99D4\Kel
Time Zone Eastern Daylight Time
Total Physical Memory 1,024.00 MB
Available Physical Memory 477.54 MB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 2.90 GB
Page File C:\pagefile.sys


aavmker4 avast! Asynchronous Virus Monitor c:\windows\system32\drivers\aavmker4.sys Kernel Driver Yes System Running OK Normal No Yes
abiosdsk Abiosdsk Not Available Kernel Driver No Disabled Stopped OK Ignore No No
abp480n5 abp480n5 Not Available Kernel Driver No Disabled Stopped OK Normal No No
acpi Microsoft ACPI Driver c:\windows\system32\drivers\acpi.sys Kernel Driver ... Read more

A:[SOLVED] No Audio After Re-installing Windows, Please Help

and welcome to the Forum

Is this a branded PC? . . if so, what brand and model

19 more replies
Answer Match 48.3%

Hi guys!

First i want to apologize for my bad english since i'm italian

So.. I just installed windows7 ultimate and suddenly the right audio channel is not working.

1) I want to make clear i've tried different cables and headphones/speakers (i'm a producer so i've got plenty..) and i can't hear the right channel at all.

2) I tried to download latest version of Realtek and it didn't help

3) On audio configuration when i press the configure button and it starts helping me configuring it, when i tried the right audio channel i could hear it very low (like the left channel is at least 10 times higher). that is the only situation in wich i can hear something coming out from my right speaker (and is like a 90w monitor.. so i think i'll hear it otherwise)

4) Since i just installed everything i tried to format and re-install, but i got no results

5) I tried the bit/hz thing but with ANY configuration i don't get any result

6) And now a very odd thing: since i got an external audio interface i tried even with that. right channel still not working.

Aaaaaaaaaaaand now some hardware things that may be helpfull to help me (hopefull)

DualCore AMD Athlon 64 X2, 2500 MHz (12.5 x 200) 4800+
2gb RAM ddr2
MB: Asus M2N-MX SE Plus
OS: Windows 7 Ultimate
Audio Interface: nVIDIA nForce 6100-430 (MCP61P) - High Definition Audio Controller PCI (RealTek ALC662)

Did i forget anything?

I really hope someone could help me since i'm stuck with my producing work (i... Read more

A:Audio right channel not working at all after installing windows 7

Update: now with the external audio interface is working on both channels in stereo

Now i wonder why without this isn't working fine on right channel.. :/

1 more replies
Answer Match 48.3%

I just installed the GameMuse DVD 5.1 driver to my Windows XP Pro because my sound wasn't working and now I can't get past the "Windows Is Starting Up" Screen. It will say video resolution not supported and then the only thing I can do is reboot.

This never happened before when I installed this driver, but it happened now after I installed and used Driver Genius Professional.

Please advise.

A:windows not starting right after installing new audio driver

Try these:

1. During startup, press F8 repeatedly (could be a different F-key, usually F8). If done right, you should come to a black screen with multiple selections, such as starting in safe mode, safe mode with command prompt, networking, etc. Select the "Start with last known good configuration" option and press enter. See if that helps.

2. In the event the above does not work, then do the same thing again and start in safe mode. If it allows you to do so, go into the device manager (right-click on "My Computer", properties, click the Device Manger button), select the device you installed the driver for, and roll-back the driver.

3. In the event neither of the above worked, do the same thing again, and start in safe mode. This time, try system restore. Try restoring to a point BEFORE you installed the driver.

2 more replies
Answer Match 48.3%

Hi,

I recently installed Windows 7 Ultimate 32 bit on Toshiba Portege M500. However there is no audio came out although in the device manager it worked properly.

I have installed realtek audio driver but still no audio.

Could you please advise how to fix this issue? Thank you.

A:No audio after installing Windows 7 Ultimate 32 bit on Laptop

If you installed RealTek, it did not take. The generic basic function Windows installed High Definition Audio Device is all that is showing for sound. Are you sure this PC has RealTek?

Looking at the Device Manager listing, this PC has other unidentified device problems. If there are motherboard chipset drivers for this model, install them as a first step.

More on the specs of this PC is needed. I looked at the Toshiba site but there are many different Portage M500 models.

8 more replies
Answer Match 48.3%

Toshiba A105-S4211

After installing Windows 7 on my laptop (clean install), everything's good EXCEPT when playing music. There is an intermittent loud buzz which lasts for a second or so - this happens only once every 5 minutes or so, but is very annoying. I tried updating the drivers to Realtek, which came with the computer originally, but it did not help.

Can someone help?

Thanks.

More replies
Answer Match 48.3%

i intalled the windows 10 to HP Core I3 laptop. So after installing I installed the Skype and conected my freinds in UK and Canada. so when we started the dialog I can hear very well my freind talking but he is not hearing my voice (audio is not working) thats the issueplease resolve, i downloaded drivers and installed again but still it does not help  please giude me how to resolve the problem thanks Sumathi.

A:how to resolve audio issue after installing windows 10

Sumathi1 Hello;Allow me to welcome you to the HP forums!I read your post about lack of sound and wanted to help -- but need more information. I see you're running Win10. Did the PC come preinstalled with Win10? Or, did you upgrade it from a prior OS to Win10?If you did the upgrade, how long ago was that, and what was the prior OS? Also, please follow these instructions for finding the detailed product number of your laptop: Finding Your HP Product Model Number | HP® Customer Support And finally, I need to know what sound drivers you are using, so please open Control Panel --> Device Manager --> Sound. In there, you should see Speakers.  CLick on that and then click the Properties button.  In there, you should have a section Controller Information, click the Properties button. Then click the Drivers button -- and tell me what it says.We can proceed once you provide the information.Thanks

1 more replies
Answer Match 48.3%

I switched OS to Ubuntu for about a week, LoL didn't run well in Ubuntu so I reinstalled windows 8. When i open playback devices all I have is NVIDIA HDMI Output (port 0) and (port 1), both of which show unplugged and disabled. I have disabled and disconnected devices set to show, but those are all that show. I have reinstalled drivers, reinstalled windows, downloaded Realtek, enabled onboard audio in BIOS, but nothing has fixed the problem so far. When I boot into Ubuntu via USB, the audio works fine.

More replies
Answer Match 47.88%

Guys, I have problem with Realtek HD audio when sound plays. The sound skippies on some areas.


Please reply.

A:Sound Skippies on Windows 7 after installing Realtek HD audio

Sound is always on a shared IRQ (Interrupt) with a higher priority device. Depending on what the higher priority device is it could be interrupting the sound.

Go to the Device Manager, RIGHT click on the RealTek entry and then LEFT click "Uninstall" DO NOT check the box to also uninstall the drivers. Restart the PC and when Windows starts it will detect and reinstall the sound. Sometimes this puts sound on a different shared IRQ and fixes the problem.

1 more replies
Answer Match 47.88%

hi,
i have a sony vaio, after i installed windows 7, it shows no audio output, diagnostic indicates driver problem. try to check the driver, said it is up to date. The sony support say they need to "install compatible windows components and reconfigure the settings in the computer", with a fee. I do not think it is worth it for this older computer to do that (A plan of one year service of $149.99).
Is there something we can do here to resolve the problem?
thank you very much

A:after installing windows 7 optimum, no audio out put, device is not installed

more info:
with the troubleshooting, it said:"SoundMax Integrated digital audio has a driver problem", maybe the driver is not compatible with windows 7. or do i have to get a new sound card?

2 more replies
Answer Match 47.46%

Hello I am looking for some help with installing Microsoft operating systems!
I want to use Windows PE or some other software that will meet my needs’!
Currently Microsoft Windows PE is not one on that list and it will not support my needs’!
Bart’s PE will not work as well!
Maybe DOS, Linux (Ubuntu Lucid 10.04.2. Linux Distribution) or other can work but do not know just started this project!
The installations that is going to be used is; USB, CD and Network install
The pre operating environment will need support for programs and software that are capable of supporting the same funcksions as the ones’ listed!
NVDA portable or software that supports the basic equivalent
Zoom portable, or equivalent.
The last one is the AUDIO support in the pre environment
This is only 3 requirements to be met can’t be to hard!
Thanks!
 

A:Installing Microsoft operating systems! Windows PE audio and drivers!

11 more replies
Answer Match 47.46%

Just like the title says, I don't want the realtek audio drivers as it completely messes with my audio and also doesn't correctly switch when i plug in headphones for example.
It also doesn't allow for the 'speaker fill' enhancement to be used when playing stereo content through surround sound.

Windows itself does a far better job as opposed to realtek.

Every time i uninstall realtek it automatically gets reinstalled.

Sorry Microsoft, you don't know best.

A:How to stop Windows 10 automatically installing Realtek audio drivers?

Stop Windows From Automatically Updating Your Hardware Drivers | Lifehacker Australia

10 more replies
Answer Match 47.46%

Hi ,

I have Dell Inspiron 3521 , i5, and I am having tremendous amount of trouble with Bluetooth audio.
I downloaded original drivers from dell website but facing same trouble. I found a lot of solution from Google but all are useless for me.
I have windows 7 64bit service pack 1
I am using this window with administrator user
Do others have the same issue? Any work being done on this?

A:Windows Encountered Problem Installing Bluetooth Audio Driver

Did this work at one time and now does not and the reason for installing the driver? Or has this never worked? It does make a difference.

3 more replies
Answer Match 46.2%

Hi,

I have just installed the audio driver for my motherboard, restarted the computer and it seems that driver doesn't do anything at all. I have the speaker icon in the tray bar with a red 'x' on it, and it says: "No Audio Output Device is installed". Why is that? I tried the driver that's on the motherboard CD and also the one from Realtek's website, and while they are different versions, the problem is identical.

Please advise.
 

A:Solved: 'no audio devices' after installing audio driver

You have posted in Windows 7 forum but your spec says
OS: Windows Vista
Motherboard: GIGABYTE GA-P35C-DS3R
CPU: Intel Core 2 Quad Q6600
RAM: Kingston 2GB DDR2 667Mhz
Graphics Card: ATI Radeon HD2400XT
2. Is it the same system please but with 7, if NOT please post the spec
3. What does device manager show please for sound - on the entry there
 

3 more replies
Answer Match 40.32%

Sound worked fine before installing XP Pro SP3......after instal, no audio.

No audio after installing XP Pro SP3 (from disc) on an IBM/Lenovo T60 ThinkPad.

IBM/Lenovo drivers from Lenovo Support site for "Audio Device on High Definition Audio Bus"

are not recognized when trying to install audio device.

Tried installing Microsoft drivers from Microsoft support site and got the same results.

Please help. Thank you.

A:no audio after installing XP Pro SP3 to IBM T60

Go to Start/Run and type devmgmt.msc and press enter. In the Device Manager are there any devices with yellow marks? If so, these devices need drivers installed.
Either way, download the Audio driver for your computer and any other drivers from the Lenovo site.

19 more replies
Answer Match 40.32%

I just reinstalled xp and restarted everything and then suddenly I have no sound. I remember there was this program I have to install to get sound but I forgot the name. Anyone got a program they can recommend? I don't have sound right now.
 

A:I need help installing audio.

If you know the manufacturer of your sound card, go to their website and look for the proper driver. If you don't know the manufacturer, look in Device Manager in your PC. In Win 98 go to: Start, settings, control panel, system, click the device manager tab, look under sound, video and game controllers. Don't know the exact procedure in Win XP, but hope this helps, T.
 

1 more replies
Answer Match 39.9%

Hello everybody!

Ok, so a couple days ago i turn on my computer and bam no audio. Clicking on the little sound icon only shows "No audio output device installed". double clicking on it brings up a msdt.exe that only leads to an error "0x80070490". Because my sound is connected through HDMI connected from my graghics card to my tv and then out through an external speaker system, i simply unplug the speaker's cord from my tv and plug it into the output on the back of my computer and it started working again back to normal. However a day later it completely stopped working again.

So of course i scour the internet for help, i uninstall and re-install the drivers to no avail through device manager. "Audio Device on High Definition Audio Bus" as it is called in my device manager (there is two of them actually, the other being my NVIDIA drivers that i uninstalled out of desperation) shows a yellow exclamation mark and brings up a (Code 1) "device not configured properly".

Whatever happened also managed to add an exclamation point next to my cd/dvd drive and plug and play software device enumerator as well. Using the same logic as i did trying to fix the audio drivers actually worked on my cd drive but the plug and play device completely disappeared and cannot re install it. I tried deleting ExcludeFromSelect=* line in the machine.inf file and then adding new hardware, selecting the hardware to install, have disk, but "plug and pl... Read more

A:no audio, re-installing drivers does nothing.

16 more replies
Answer Match 39.9%

A few months ago I installed Windows 7 Ultimate (x86) on this computer and I got all drivers to work except for IDT Audio. Assuming IDT would provide some installation patches later, I just kept putting off. Now, several months later, nothing has come up and I'm still stuck without it. Everytime I try to start the setup file, it would start Install Wizard, but it would then give me an error saying "ExitError:Error=Device Object not present, restart the system and run setup again"

My computer's specs:
Motherboard: GF7050-M by ECS
RAM: 4.00 GB

I'm not really sure what else might be needed, so just leave a post asking for more information.

A:Problems installing IDT Audio

Do you have a Vista driver? The Vista drivers should work OK on Win 7. Have you tried downloading the driver again? Maybe the driver you have is corrupted. Also, if there are motherboard chipset drivers, did you install them? On many systems the chipset drivers must be installed before installing sound drivers.

2 more replies
Answer Match 39.9%

I have been running XP with SP2 for years, and after a virus problem a few months ago, (which BleepingComputer helped me remove), I decided to move up to SP3. After it was installed, followed by 68 updates, everything seemed to be working well, until I tried to play an audio file. My system shows no audio device installed. I tried to find a solution to the problem, but what I found is that the Realtek HD audio adapter (which is built in to my Toshiba A105-2141 laptop, is not compatible with SP3.

So I decided to uninstall SP3, and stay with SP2. I have followed the procedures to removing SP3, but it uninstall wizard "cannot find a file", and then announces that SP3 was no uninstalled.

I would like to restore audio to my computer, either with a fix to work with SP3, or by going back to SP2. Can anyone help?

A:No audio after installing SP3, and cannot uninstall

<<...Realtek HD audio adapter (which is built in to my Toshiba A105-2141 laptop, is not compatible with SP3...>>

Can you post a reference for this, please?

FWIW: Loss of audio usually indicates damaged audio drivers...overcome by reinstalling the audio drivers.

Louis

5 more replies
Answer Match 39.9%

I have an old Auzentech X-Plosion Cinema sound card and Realtek audio connections on my P8P67 motherboard.

Would there be any problems if I installed drivers for both and switched between them?

A:Installing two audio drivers

You can only have one default audio playback device but not both at the same time. Unless you run into a conflict it should work OK. Just as noted you will have to manually change the default playback device to whichever one you want to use in the Sound Panel.

2 more replies
Answer Match 39.9%

Hello,

I just installed Windows 7 Ultimate. Clean installation, everything that I had before is now gone. Before today I ran on Windows XP.

Anyway, everything else works perfectly, I installed all other drivers, but I am having serious trouble installing IDT HD Audio.

I tried to install:

Download IDT HD Audio Driver 6.10.6222.0 for Win7 Driver for Windows 7 - Softpedia

Download HP IDT HD Audio CODEC Driver 6.10.6225.0 Rev.A for Win7 Driver for Windows 7 / Windows 7 x64 - Softpedia


But everytime I tried to install it it showed me an error saying: The hardware detected is not supported by this IDT software package. The install will be aborted.


Could anyone help me, please? How could I install it? on Win XP I was running on IDT audio and I pretty much loved it.

Thanks,

A:Problems installing IDT audio

  
Quote: Originally Posted by Beach


Hello,

I just installed Windows 7 Ultimate. Clean installation, everything that I had before is now gone. Before today I ran on Windows XP.

Anyway, everything else works perfectly, I installed all other drivers, but I am having serious trouble installing IDT HD Audio.

I tried to install:

Download IDT HD Audio Driver 6.10.6222.0 for Win7 Driver for Windows 7 - Softpedia

Download HP IDT HD Audio CODEC Driver 6.10.6225.0 Rev.A for Win7 Driver for Windows 7 / Windows 7 x64 - Softpedia


But everytime I tried to install it it showed me an error saying: The hardware detected is not supported by this IDT software package. The install will be aborted.


Could anyone help me, please? How could I install it? on Win XP I was running on IDT audio and I pretty much loved it.

Thanks,


Did you try running it as an administrator?

3 more replies
Answer Match 39.9%

Hi,


New Build and a NOOOOBE,
MSI-Z87-GD Motherboard - SSD HD. Win7- X64 Ultimate - 8G DDR3 ram.
No programs installed except upgraded to MS IE11. Have been updating Windows.

Installed, from MSI M/B disk - Chipset, Vga, Lan and storage drivers.
I have not installed - SoundBlaster Cinema or Realtek ALC 1150 codex drivers.

I am getting Audio now using the rear "Green" port..

I have two desk speakers and one Sub-Woofer, Should I
or do I need to install SB Cinema and or Realtek?

If so what order? Realtek 1st then SB cinema?

Will I continue to utilize the same green rear speaker port?

Will I need to change my "Audio" config. settings after, and to what?

Sorry for the Newbe questions..
Thanks

Bob

A:Installing Audio on MSI motherboard

Hi,

I forgot to ask... If I create a restore point prior to installing the Audio Drivers will this
restore point take me back to "Prior to Installing"?

Thanks

5 more replies
Answer Match 39.9%

I am running Windows XP home edition and finally got brave enough to install Service Pack 2 after hearing of it causing lots of problems. But the news lately seemed to be positive so I thought it was finally safe. After going through the long process and rebooting, I immediately noticed I had no sound and I no longer have a volumn icon in my task bar. When I open Sounds and Audio Devices in the Control panel, it tells me "no audio device". How do I fix this problem? Who knows how many other problems I will encounter if something like this showed up immediately! I knew there was a reason I didn't want to install this SP!

Thanks in advance,
Cindy
 

A:No audio device after installing SP2

7 more replies
Answer Match 39.9%

Hi everyone!
I'm new here so if i post this in the wrong place, i apologize!

I have Win XP sp3 and all the requirements are there. I just bought the Audio Advantage SRM USB. I followed the instructed manual on how to install the card. When it comes to the part where it asks to
'please insert the Audio Advantage in the USB port then click OK'
I clicked OK, but it will not work. It keeps coming up, even
though i've connected the product to the USB port. I tried using the
Vista driver (srm_vist.exe) but its still not working.

Can anyone help me ?? thanks you!

my email: [email protected]



 

More replies
Answer Match 39.9%

I purchased a asus netbook from a pal awhile back. I had nothing but problems with xandros and was eventually convinced to switch to xp. I installed the new os and proper drivers but no matter what I do I cannot get any audio. Any suggestions?

More replies
Answer Match 39.9%

Hi there, I just installed Windows XP on a computer that was severely infected. I had to wipe the hard drive partition and started a new installation of XP professional, however after installing it, I can no longer see the speakier icon on the task manager.

I tried updating drives from the device manages but it says that there are no drivers installed. I follow the stes where you direct or browse the drives to install and if fails bacause it doesn't find the drivers.

I installed a HDA Bus Driver and restarted my PC but still nothing..... Please help and thank you in advance for your time.

A:[SOLVED] No audio after installing XP

Make and model of the computer?

4 more replies
Answer Match 39.9%

My system is a Dell Dimension 8100, running Windows ME

After re-installing Windows ME, there is no sound. Everything worked well before the re-install. Can you tell me specifically what to look for and what todo. I looked at the device manager and saw the following information.

AUDIO Under device manager I see SOUND, VIDEO AND GAME CONTROLLER
under that category I see Crystal Sound Fusion (with a yellow exclamation mark), and Wave Device for Voice Modem.
 

A:Audio gone after re-installing Window ME

Those exclamation point seems to indicate that the driver is not installed ( to be 100% sure, double click on it and on the new window that will come up windows will offer some sort of information about what is wrong).
On a hunch, i believe that the driver is not installed. Basically you'll need to get to the Dell site and under support will need to download the audio driver and the install it.
But first as i mentioned , double click and check out the message that windows puts
HTH
 

2 more replies
Answer Match 39.9%

My audio got off 5-10 minutes after installing ad-block using Firefox. I shut down all my programs open, disconnected my headphones, reconnected them, and the audio was working fine. I feel like this is connected to my installing ad-block. I've already removed it because I'm paranoid about this issue. Should I un-install and then re-installFirefox as well? I feel like this has srewed up my entire internet browser.

A:Audio got cut off after installing an add-on using Firefox

Hi. Can you check Ad Block settings here? http://www.wikihow.com/Remove-Ads-from-Mozilla-Firefox-Using-Adblock-Plus

1 more replies
Answer Match 39.48%

I installed windows xp and all the proper drivers on my asus eee pc but after installing reltek i still cannot have no audio. Previously, when my system was running on xandros I had no issues playing music. I have called the asus tech support line countless times trying to fix this issue but have had a severe lack of luck. Does anyone know what the problem may be?
 

A:no audio after installing xp and drivers on netbook

7 more replies
Answer Match 39.48%

Hello,

This morning i did a clean install of Windows 8 on my new Laptop
and just had a BSOD while i was installing latest Realtek drivers.
Hope someone can figure out wat's causing it
Thank-you

A:BSOD while installing Realtek Audio

Your BIOS dates from 2011. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:





There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website). Be sure to update ALL controllers on the motherboard! I STRONGLY suggest not using controller drivers older than mid-2012 with SSD's.
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch co... Read more

5 more replies
Answer Match 39.48%

Hey guys, an issue I've been struggling with all evening here.

Today I upgraded this box from onboard graphics to a Nvidia Geforce GT 430 and also installed the 260.99 graphics drivers from the main Nvidia site.

the motherboard is from the Foxconn G31MX series of boards (775 chipset).

The OS is Windows 7 Professional

After installing the new graphics card and drivers, my sound device was replaced with a non-functional Nvidia HD audio device, I have uninstalled this and installed the windows 7 drivers from foxconns support site.



Still no audio device !

Any help would be much appreciated.
 

A:No audio device found after installing new GTX 430

If you see any yellow exclamation marks in the device manager, delete these and restart the PC. See if the sound returns
 

3 more replies
Answer Match 39.48%

I'm running Windows XP SP2. I had absolutely no problems installing the audio driver from the disc that came with my motherboard the first time around. Unfortunately, I had to reformat and reinstall Windows because my harddrive was being recognized as disk "i" instead of "c" (causing alot of problems for me installing software). So now that problem has been solved, but I can't get the Realtek audio driver installed. A message pops up each time I try to install it which says: "Install Realtek HD audio driver failure". Could it be because I also installed "uaa bus driver - version 5.10.0.5010? I don't think that one was meant to be used with Windows XP SP2 (it's not listed as being one of the OS's that supports this driver). Of course, now I have no idea how to get rid of it, and a balloon pops up from the taskbar each time I turn on my computer saying "new hardware installed". I try to install it using the wizard, but it won't install. What's gone wrong?
Bryan
 

A:Installing Realtek audio driver

Try a different version of drivers, hopefully more updated from the manufacturer's website.
 

3 more replies
Answer Match 39.48%

i ran aida 32 recently and it says my audio device is the sis7012 so i tryed to install this driver and i get an error 536870397 failed to install will now abort! i cant understand it any ideas???????

thank you if u can help!!
c.h.
 

A:installing the sis7012 audio drivers

Can't guarantee anything, but a couple of things to try:

Go to system properties (device manager) and remove any sound devices. Then refresh.

If the drivers don't reload, try using the "upgrade drivers" feature on your device in the device manager. have it search the disc with your drivers-in other words, have it search the old fashioned way. Don't bother with the installation program.
 

3 more replies
Answer Match 39.48%

I'm running Windows 7 Ultimate 32bit.
Motherboard > Gigabyte ga-m68mt-s2p

When I manually install audio driver for Realtek alc-888b/889 from the dvd came with motherboard, still windows says 'No sound card was found. No driver installed....'
I checked by running dxdiag.

I can't get the issue. Please help. Tnx.

A:Problem installing AUDIO DRIVER

Hi,

Run the Windows Update before reinstalling driver.

Go to system manufacturer’s website and look for latest driver, Download - SAVE - right click and
RUN AS ADMIN. REBOOT after each driver installation.

Sound drivers often rollback so check the version after installation and the reboot to
see if the version you installed is there, if not repeat the install - reboot until it is. It can take
several tries depending on how many rollbacks it does.

Also Right Click Speaker near clock - Playback Devices - right click in the box area - check
Show disable and disconnected devices. Highlight speaker and on the lower Right click
Properties check settings for Device Usage enabled and so on. Also do same for Configure
on Lower Left of that box.

3 more replies
Answer Match 39.48%

hi, my onboard sound card is an ac'97, windows vista installed the drivers without even downloading them. there is no sound that comes out at all, i downloaded and installed the drivers manually and still doesn't work.

vista home basic SP1 x86 (upgraded NOT clean install from XP home sp3)
i haven't used the on-board in long time, but my sound card i had installed got fried somehow, the computer wouldn't even boot, so i had to take it out.

vista says there are no problems, and i can see the green bar (like an equalizer) that appears in the sound mixer.

it used to work fine when i did use the on-board, the speakers aren't even 1 year old.
 

A:no audio even after SUCCESSFULLY installing drivers

When you remove the existing drivers from the device manager -- there is an option to delete the existing files. Then when you reboot -- nothing should be found and automatically installed.

Sometimes this works best before installing the downloaded drivers.
 

2 more replies
Answer Match 39.48%

Hi all,

Hope someone can help me with this. I have no idea where to look.

I'm running Windows 2000 SP4 (fully updated), with Windows Media Player, QuickTime, and DivX Player installed (all kept up to date). I've had no video or audio problems, until...

I installed the CD that ships with the Samsung YP-Z5F MP3 player.
This installs three apps:
-Samsung Media Studio (just a fancy browser for mp3 files)
-XviD 1.0.3-20122004
-Lame MP3 Codec (for the ACM)

After installing them all (and leaving the option "Decode all supported FourCCs (DivX, DX50, MP4V)" checked in the XviD installer), I've had the following problems:
-Audio is gone, the computer now only makes high screechy sounds.
-WMV and MPG videos get stuck after 4 seconds, then take endless amounts of time to play (Windows Media Player).
-AVI videos are also screwed; either they don't play at all, or very slowly (DivX Player).
-QuickTime .mov files seem to play ok.

I've already tried upgrading XviD to the latest version (1.1.0), and uninstalling all this crap (rebooting at every turn), but it has no effect. Can anyone tell me where I can undo the damage?

Thanks,
cronopio.
 

A:Bad audio and video after installing XviD

16 more replies
Answer Match 39.48%

Hi all, I've tried searching both this thread and elsewhere but I can't find a solution that works for my issue.
I just upgraded my Sager NP6165 laptop to W8 and updated all the drivers (chipset, wireless, etc.) using the Sager websites latest drivers and everything went well except for the fact that I have no sound at all.

I have two listings in the Device Manager for sound; High Definition Audio Device and VIA High Definition Audio.
The VIA HD Audio is listed as working properly in the Properties section but the other has a yellow exclamation mark this message: Location 3 (Internal High Definition Audio Bus) "This device cannot start. (Code 10) {Operation Failed} The requested operation was unsuccessful."
In order to solve this problem I have tried updating the audio drivers several times,trying to look internally and on the Web and have done multiple driver uninstalls for both hardware listings with no luck. I still have no sound although the software tells me that I should.
Does anyone have any ideas? Should I install an older driver in compatibility mode?

A:No sound after installing audio drivers

Uninstall the High Definition Audio Device, in the Device Manager. This is the generic, basic function, sound driver that Windows installs. If you have two they can conflict and nothing work. I assume your PC has Via High Definition Audio as the sound chip.

Check the Sound Panel and your "speakers" should be set as the Default Playback device.

The PC Vendor's drivers are preferred. Non vendor drivers may or may not work or may not work correctly.

Windows 7 drivers are compatible and work OK in Win 8. I have RealTek audio and I installed the Gigabyte (my motherboard) Windows 7 drivers and the sound works perfectly.

3 more replies
Answer Match 39.48%

I'm trying to install the audio driver for my father's computer. He has Windows XP and his motherboard is an Asrock P4I45G. I downloaded the driver from Asrock's website:
HERE
But now I'm lost. There is no installation wizard, just a zip file. And I have no idea what to do next. Can anyone help?
Bryan
 

A:Solved: Installing an audio driver

I'm assuming it's the C-Media audio driver for XP, dated 01-16-2004, that you downloaded and saved.

Place the ZIP file by itself in a folder on the desktop. Right-click the file, then click "Extract Here" from the list that appears. Once the extraction process completes in a few seconds, a folder containing several files will appear. (Note: You can now delete the ZIP file). Double-clicking the "Setup.exe' file will start the install process. Once it's complete, reboot the computer.

(Just in case you need it for future reinstall, I would burn off the folder to a CD-R)

----------------------------------------------------------------------------------------------------------------------------------
 

3 more replies
Answer Match 39.48%

I have an Acer Aspire M3910 desktop with both the video and audio integrated. The video adapter is "Intel Havendale/Clarkdale Processor. The audio is Realtek High Definition.
I use the computer mainly for photography and internet browsing. I have a "SB Audigy 2 ZS audio card and a nVidea GeForce 6800 video card from my old computer. Is it worthwhile to install one or both these cards into my new computer?
 

A:Installing Video and Audio Cards

11 more replies
Answer Match 39.48%

Im trying to update my Creative Xfi drivers in vista but when i install the crucial update it fails every time even though a message come sup telling me the update was successful. Without the audio drivers not only do my recorded songs not play properly on my 5.1 sound system but i cant get Vista SP1. So far Vista has proven to be useless crap, im glad i installed this on a separate partition to xp rather than upgrading because this operating system is a big load of crap. I just want things to work that work in Xp and its fair to want to be able to install the service pack.
 

More replies
Answer Match 39.48%

When Windows was installed i must have made some sort of mistake, because the sound doesnt work. It appears as if no audio drivers are installed. I have tried reistalling it with the installation guide, scanning for drivers on the HDD, in the xp install disc and on some other discs that came with the comp. I tried scanning for drivers with windows live update, but since i have changed my network setup at one point it tries to "dial up" in a broadband connection. I was foolish enough not to click the settings button and the connection window has not come up again, even after repeating what made it came up the first place. Can i somehow check for drivers some other way using windows update? I cant find any cd labled with anything implying audio drivers.

A:Trouble installing audio drivers

System manufacturer and model?

Louis

2 more replies
Answer Match 39.48%

a friend of mine just recently installed a new soundcard cuz his system just came w/integrated . which means theres an added audio port (expansion slot at the back lower part of the tower when he tried to play an audio using his external speakers w/subwoofers .it doesnt seems to works we check already the audio sound devices and configuration ,this speaker s are all working in a known good pc ,enhancement and drivers are properly installed anyway... we cant hear any audio sound or any indicator that there is an audio noise comin out of the system speakers.

the integrated audio port works fine but using the new expansion sound card port doesnt work . Do we need to disable somethinhg or turn off any audio device options inside the "BIOS" for us to be able to hear a sound cuz one of our friend told me that but were not really sure how to to do..it.. It appears really easy to fix this but were really both exhausted about this issues . by the way his sytem is already out of warranty he cant ask any support from his pc brand tech support anymore.......cuz he need to pay for the troubleshooting service.his sytem is DELL
 

A:No audio sound after installing soundcard

hmm intresting
 

5 more replies
Answer Match 39.48%

I recently reformatted my PC and have had difficulty in installing audio drivers. My system is running Windows XP Professional, Version 2002, Service Pack 3.

My machine is using an Intel D955xbk motherboard. Other hardware info follows:

Genuine Intel CPU 3.20 GHz
2.00 GB of RAM
500 GB Western Digital SATA hard drive
MSI R4670 Graphics Card, 512 MB DDR 3

After reformatting, I installed the necessary drivers and updated windows to Service Pack 3. For the audio device, I used the AUD_allOS_D20001.0x_PV_IDTGUI_v105_Legacy driver from Intel's site. On the first run, the files extracted and the installer launched. It appeared to precede normally, until I received the message "Cannot copy file st322000.dll" Although I saw this file in the extracted folder, the installer kept producing this message until I exited. Afterwards, the Device Manager showed Audio Codecs, Legacy Audio Drivers, Legacy Video Capture Devices, Media Control Devices, Video Codecs, and Two identical entries with question marks and the title "Audio Device on High Definition Audio Bus." On my second attempt to install the audio drivers, I received a message saying "The hardware detected is not supported by this IDT software package. The installer will abort."

Anyone have a clue what's going on here?

A:Trouble installing an IDT Audio Driver

Have you tried the "Intel Driver Update Utility"?It's possible this may help you find another driver that works. You may also want to look at KB888111 from Microsoft. This is the Universal Audio Architecture driver for Windows XP, 2000, and 2003.Hope this helps,

8 more replies
Answer Match 39.48%

ok about 5 months ago i accidently uninstalled multimedia audio controller and now when i go to reinstall it. it brings up

Found new hardrive, and then is says multimedia audio controller.

i go to install it automatically and when i click on that it just stops the process saying need CD-ROM

i cant find the CD-ROM it came with.

is there a location were i can download the software from online? or am i not installing it correctly.

it also says This device is not configured correctly. (Code 1)
 

A:Help!!! with installing multimedia audio controller

Hello and welcome to Techspot.

If you have onboard sound, you can get the audio drivers from your mobo manufacturers website.

If your computer is an oem build such as Dell/Gateway/Hp etc, you can get the drivers from your computer manufacturers website.

If you have a separate sound card, you should go to your soundcard manufacturers website.

Regards Howard :wave: :wave:
 

8 more replies
Answer Match 39.48%

I have a relativly new computer, I have installed a cdrw on it and when I came to the point where I needed to plug the audio cable from the cdrw to the mother board there was not a place for it to go. I had a dvd/cd-rom put in this computer upon purchase and I see where the audio cable is pluged in from it and right beside it is another 4 prong plug but it is not the same type.
My question is should there be another area to plug in this audio cable and if not what does it effect if it is not pluged in.
 

A:installing new cdrw no audio plug on mb

it does not have to be hooked up. you just win't be able to play audio cds in it. but you have the other to do that.
Jerry
 

2 more replies
Answer Match 39.48%

My first post here. Hope I did it right. I've installed a new REVO3 X2 hard drive and I'm getting various blue screens. Here's the latest.

Thanks for any help.

A:BSOD installing audio driver

Hello Bob, it is crashed by OCZ 10xx SCSI Controller Driver (likely for the Revo Drive 3 and 3 x2).

Code:
fffff880`0a3629e8 fffff880`0117296fUnable to load image \SystemRoot\system32\drivers\ocz10xx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ocz10xx.sys
*** ERROR: Module load completed but symbols could not be loaded for ocz10xx.sys
ocz10xx+0x496f
First try reinstalling the driver, and let us know, is it crashing again? Search for any available updates here: http://www.ocztechnology.com/drivers...voDrive_3_X2_/ . That one you are trying is dated April 6, 2012.

4 more replies
Answer Match 39.48%

I've installed my pc, and as usually i install an audio driver. But, in the middle of installation my pc restarted and viewed bsod. But after that, my unknown audio device is not seen. And the audio didn't work. So, I installed the os again. It still didn't work. But, suddenly there's an unknown device driver popup and I inserted my cd driver. But, in the middle of installation it viewed BSoD and the audio driver lost again.
Here's something I got from dumpcheck :

Filename : sysaudio.sys
Address In Stack : sysaudio.sys+1ae4
From Address : 0xf2679000
To Address : 0xf2687d80
Size : 0x0000ed80
Time Stamp : 0x48025beb
Time String : 14.04.2008 02:15:55
Product Name : Microsoft® Windows® Operating System
File Description : System Audio WDM Filter
File Version : 5.1.2600.5512 (xpsp.080413-2108)
Company : Microsoft Corporation
Full Path : D:\WINDOWS\system32\drivers\sysaudio.sys

I don't know how to use these info, but hopefully it helps here. If anyone know, please help...
 

A:BSoD on installing audio driver

12 more replies
Answer Match 39.48%

wrong post. please remove
 

A:error installing Audio driver

Hmm, did there come a CD with your Mobo or Soundcard? if so install it from that one. if not try finding a more up to date driver..

- Daniel
 

1 more replies
Answer Match 39.48%

MY System.
Windows XP +SP2
P4 2.4Ghz
1GB DDR333 RAM
ASUS P4S8X-X Motherboard (integrated sound)

After reinstalling XP I have no audio.
I have tried installing the sound drivers from CD, and also from the ASUS website.
There are no ! or ? on Device Manager and yet still no audio device, or other sound device appears.

Can anyone help?

A:No Audio Device registered after re-installing XP

I have BTW checked the BIOS and AVANCE 97 integrated PCI device is enabled.

2 more replies
Answer Match 39.48%

I've spent a couple days trying to install the Realtek audio drivers onto my machine, but I can't get the installer to work properly. It looks like it's copied a lot of files to C:\Program Files (x86)\Realtek\, but after I restart there are only four files copied there and the drivers haven't been successfully installed.

These are the only drivers I've had trouble with, and I was wondering if someone could give me directions on exactly how to install the drivers. No one else seems to have had trouble installing them, so I must be doing something wrong.

Thanks for your help!

A:Need Help Installing Realtek Audio Drivers

  
Quote: Originally Posted by gamemakerkid


I've spent a couple days trying to install the Realtek audio drivers onto my machine, but I can't get the installer to work properly. It looks like it's copied a lot of files to C:\Program Files (x86)\Realtek\, but after I restart there are only four files copied there and the drivers haven't been successfully installed.

These are the only drivers I've had trouble with, and I was wondering if someone could give me directions on exactly how to install the drivers. No one else seems to have had trouble installing them, so I must be doing something wrong.

Thanks for your help!


Well I installed the Vista, Windows7 Driver(32/64 bits) Driver only (Executable file) from the link below with no problems. Is that the same driver your having problems with?

Realtek

If your on x64 it should actually copy the drivers to here

C:\Program Files\Realtek\Audio\HDA

9 more replies
Answer Match 39.48%

I can't get sound working in Windows Vista. However, the sound drivers are installed. Sound was working in Windows XP and 7. Sound is not muted.

A:No sound after installing audio drivers

Bump????

13 more replies
Answer Match 39.48%

I've just built my brand new PC Rig and i am having an issue with an audio driver. So i go on my motherboards website and try download the audio driver, Once it is downloaded i try run it getting this error: "Install realtek hd audio driver failure error code 0x00000ff"
This is so frustrating as i literally have tried everything. Ive tried uninstalling it and installing it 10+ times, Audio is enabled in my BIOS, Ive tried deleteing it out of my device manager then installing it, Ive tried installing it in Safe mode, Ive tried letting Windows updater download it, Ive tried multiple driver updater softwares, Ive spent Hours trying to figures this out. Please help.
Specs: ASRock H81M-HDS Seagate 3.5" Barracuda 1TB Patriot Signature 4GB Asus R7260X-DC2OC-2GD5 2GB R7 260X Coolermaster RC-K282-KKN1 Intel Pentium G3258 3.2GHz 3 EVGA 430Watt 80Plus Power Supply Unit Windows 7 Home Premium

 

A:Audio Driver not installing - Window 7

Anyone?

1 more replies
Answer Match 39.48%

Hi Folks.

This place seemed as good a place as any to come and ask for help, so here goes...

My dad's been having internet problems for a long time now, mostly due to YouTube. I tried everything to fix it and in the end we decided that the only thing to do was to upgrade his computer to Windows 7.

We did so, and have since upgraded both his and my computer to Windows 7 Ultimate. Now here's the problem:

My computer has perfect audio. Movies, games, music, YouTube...everything works perfectly.

My dad's computer has NO audio AT ALL. Why this is so, I've no idea. I've tried installing some drivers that were recommended to me, but that's done absolutely nothing. The 'Speaker' symbol on the bottom right of the screen remains inactive with a red and white cross next to it.

I did a bit of reading through this site as well as some of my own troubleshooting and I'm fairly confident it's something wrong with the sound-card. The thing is, I'm not sure how to find out what sound-card that computer has! What do I need to do and how do I fix this problem?

A:Lack of Audio since Installing Win7. Why?

the easy way to find your sound card details is download pc wizard 2010,its free and very easy to use,there are others you can use such as sandra light.

4 more replies
Answer Match 39.06%

I have installed SP1, Very late I know! However now it has installed it has disabled my audio. I have tried updating the drivers, uninstalling the drivers and reinstalling from the hardware section of control pannel.

I read a previous thread that says I should depending on my motherboard download the drivers directly. How do i determine what my motherboard it?

Should this solve the problem?

Cheers,
James

A:No sound after installing SP1 - PnP Audio Device problem

Hi James and welcome to Vista Forums

Have a look at this thread and fill in your System Specs as this will help us to help you with your problem: http://www.vistax64.com/general-disc...formation.html There is a link there to a tool which you can download and run to extract the necessary information.

2 more replies
Answer Match 39.06%

I left the room for about 15mins and when I returned my Win 10 Pro was downloading-installing a "critical" update. It installed successfully, but when I tried to play "any" audio or video file from "any" source...I get nothing ! It is a new update so there isnt much info out there that I have found....one source said they experienced wireless problem and thats it...this happen on Sunday 1/25. I grew up with Win95/98/XP and was comfortable with where everything was laid out, not so much with Win10...not sure this info is important but I bought this Dell PC with Win7 Pro installed upgraded to Win10 and now wondering if I cant figure this issue out can I reinstall Win7 from factory defaults ?...OR...have I given up the Win7 license and I'm stuck with Win10 ?
Last note....I considered uninstalling the update but since MS has it as a critical update the source I read said that it would download and install at a later date....so I feel stuck....Idea's please !
 

More replies
Answer Match 39.06%

Hi after installing dfx audio enhancer i can not record my voice with internal mic of laptop! I uninstalled dfx but problem exist! I can not restore windows and i just reinstalled windows caus if this problem! And after instakking dfx i get this problem again! I tried a lot of settings ... I'm frustrated... How can i restore all of soubd setting? There is no sound in records... There is no bar in sound recorder software... Reinstalling realtek didn't help..

A:recording problem after installing dfx audio enhancer

Hello hammon and welcome to Seven Forums.






Quote:
I can not restore windows and i just reinstalled windows caus if this problem! And after instakking dfx i get this problem again!


You reinstalled Windows and the enhancer still doesn't want to work right. Seems like dfx audio enhancer doesn't want to play nice with your computer. If it was my machine, I'd find a different enhancer.

2 more replies
Answer Match 39.06%

Hey
I just installed SP1 on my Home Premium 64bit. After installing it, all my sound is gone. I checked the Help page about this subject, and found out that the drivers for my "PnP Audio Device" are not up to date (there is a yellow triangle with !-mark in front of it). I tried to update them via Device Manager, but it didn't work.

What should I do?

A:No sound after installing SP1 - PnP Audio Device problem

Hi Som1n,

What type and brand/make is your motherboard?

Steven

7 more replies
Answer Match 39.06%

Hi,

I'd like to ask also about HD Audio Driver Software. What brand can you recommend for my Vista Home Premium? Because i really got a problem of reinstalling the realtek HD audio driver software. it says installing failure. 'cause i supposed to update it but it failed to. now the old version is uninstalled, while i cannot install it back 'cause of the failure. please give me some advise.

A:Problem with installing the Realtek HD audio driver

Hello W377ice,

If you have not already, you might see if you can uninstall it from Programs and Features, or the sound device from Device Manager. Afterwards, run the latest Realtek HD audio driver to see if it will let you install or repair.

Hope this helps,
Shawn

14 more replies
Answer Match 39.06%

Hi.

I've installed recent updates from Toshiba, exactly:

**02/06/14 Display Drive nVidia Windows 8.1 - 64 Bit 9.18.13.2660 World Wide **
**02/06/14 Display Driver Intel Windows 8.1 - 64 Bit 10.18.10.3308 World Wide **
**05/06/14 Service Station Toshiba Windows 8.1 - 64 Bit 2.6.8 World Wide **
**02/06/14 Toshiba Audio Enhancement Toshiba Windows 8.1 - 64 Bit 2.0.15.4 World Wide **
**02/06/14 Toshiba Function Key Utility Toshiba Windows 8.1 - 64 Bit 1.1.0001.03 World**

and one of them forced the creation of a new audio device, failing with "STATUS_DEVICE_POWER_FAILURE".

I tried to remove (and unistall drivers related to) the device, but it reappears if I do new hardware detection.

Whats is it?
Drivers are from Microsoft, 6.3.9600.16384

Thanks a lot
Marco

A:New, failing device, HD Audio after installing Win 8.1 updates

Hi Marco

As I can see from another thread you have Satellite L50-A-1CU. According notebook specification this notebook was offered with preinstalled WIN8.1 64BIT ML.
Preinstalled OS contains all necessary drivers, tools and utilities so I just want to ask if there is some problem with functionality.

Please don't understand me wrong but I use 4 years old notebook but still with original preinstalled stuff and everything works perfectly so I don't see the reason to change anything if machine runs well and preinstalled OS is stabile.

One more thing. Don't use Microsoft drivers. Some of them are offered as optional Windows updates. Don change anything. Use original Toshiba drivers only.

3 more replies
Answer Match 39.06%

Hey, I'm new to all of this drivers and such...
I am currently running a Sony VAIO (VPCEJ190X) with Windows 7 Professional x64.
The audio driver came as Conexant SmartAudio HD and I'd really like to get the Realtek HD Audio Driver.

Here is what I've done.

Downloaded and installed (w/ restart) Version R2.69, 64 bit realtek driver from their website.

Result:

Programs List.
Device Manager.
That's what I've done so far. Help please?

A:Problems installing Realtek HD audio driver

Welcome to the 7 Forums, Elite19.

The RealTek Driver doesn't seem to be installed. May be RealTek Audio Drivers are not compatible with your Computer. After you installed the RealTek Driver did the installation go properly?

6 more replies
Answer Match 39.06%

I have the drivers for the "Avance AC97 WDM Driver for Intel(R)/VIA(R)/SiS(R)", but when I choose the INF file to start installing, it comes up with an empty list. I am using windows XP.

I have tried the right click install option as well but nothing works. Would greatly appreciate any help. I miss sound! Thankyou.
 

A:Problem Installing Avance Audio Driver

16 more replies
Answer Match 39.06%

Here is the information about my system:
os name microsoft windows 7 home premium
version 6.1.7600 build 7600
other os description not available
os manufacturer Microsoft corporation
system manufacturer hp-pavilion
system model KJ385AA-ABA a6433w
system type X86-based pc
processor Intel? Core?2 Duo CPU E8400 @ 3.00Ghz, 2999 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS device American Meagatrends Inc. 5.22, 3/28/2008
SMBIOS version 2.5
Window Directory C:\Windows
System Directory C:\Windows\system32
Boot Drive \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = ?6.1.7600.16385
Time Zone Central Time Zone
Installed Physical Memory (RAM) Not Available
Total Physical Memory 3.00 GB
Available Physical Memory 1.99 GB
Total Virtual Memory 7.49 GB
Available Virtual Memory 6.48 GB
Page File Space 4.50 GB
Page File C:\pagefile.sys
Here are some of my problems:
My cd/dvd drive is missing
Itunes will not play
my mouse is not working(may not be related)
I would appreciate any help I can get

A:Audio device problems after installing updates

Make a Print Screen of Device Manager please.

1 more replies
Answer Match 39.06%

I am getting weird errors while installing the drivers LIke >
1.( Installation is unable to continue because of one or more unresloved issues.
Please contact support services and quote error I/001)

Sound Card> Creative Sound Blaster X-Fi Titanium 7.1 Sound Card (70SB088000000) [70SB088000000]
OS> windows xp sp3

A:Problem with creative audio drivers installing .

Are you using the latest for the card,

Creative Worldwide Support > Sound Blaster X-Fi Titanium

or what is on the driver disk?

2 more replies
Answer Match 39.06%

Here's what i know about my computer:
Intel(R) G965 Express Chipset
Intel(R) Core(TM)2 Duo Cpu E6400 @ 2.13GHz
Sound is integrated
Sigmatel Audio Drivers.
OS Windows Xp Home Edition
Custom Built computer.
I think the drivers were called SigmaTel Audio 5.10.4821.0 , But I'm having trouble finding any kind that are non dell or gateway. I already contacted the computer guy who redid my computer and he said he can get the drivers off the net. So to save some cash I'm trying to find them myself. If anyone could help, I'd appreciate it.
 

A:Solved: I need help Finding and Installing Audio Drivers

9 more replies
Answer Match 39.06%

Hello guys. I am new here and really hoping you guys could help me out!

Basically i formatted my computer yesterday and reinstalled Windows XP. But now when i try to add my drivers for my sound card i get an error. Its a Rundll error and its coming up every time i try and set it up.

The thing i am confused about is that my sound card says it is working properly. Its a Realtek AC'97.

Here are some pictures of the errors that i am getting:









I really hope you guys can give me some sort of information on how i can fix this. It would be must appreciated.

Kind Regards
Steve
 

A:No audio device found, after installing Realtek AC'97!

List any Problem Devices

Make sure all your devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
Generate and attach a DirectX report

click Start->Run, enter dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save to your Desktop
In TechSpot, use the paper clip icon to attach the report. (If you don't see icon you may need to first click Go Advanced)

 

7 more replies
Answer Match 39.06%

Windows XP Home SP3
Dell DIM4400
Firefox 3.5.2 / IE6
NVIDIA GeForce2 MX400
ISP: Comcast Cable (Modem)

Hi,

Whenever I install the DFX Audio Enhancer (Free Version) for my Windows Media Player 11 the DFX Splash Screen will show for a second and then the WMP11 crashes.

When I download the DFX, I let the installation download to it's default location (Program Files>DFX) so I don't do anything out of the ordinary during the installation phase.

I then find it necessary to go to Add/Remove Programs and uninstall the DFX and then my WMP11 will work ok without it.

Anyone have any experience and a solution for this problem?

The DFX for Real Player that I've installed works fine with no problem.

Thanks for any help or advice.
 

More replies
Answer Match 39.06%

I inadvertently reinstalled WXP a few months ago(at least I think that's what I did). Since then I have had many reconfigurations to work out. Right now I can't get much out of my various audio/video software programs, including Musicmatch, Real One, Cool Edit, etc. Windows Media Player does play music and video, but when I play my MP3s', about half way through I always get an error message(the mp3 files keep playing, until I click ok on the error message).

I'm possibly missing some kind of common driver or something these devices all need?

I'm attaching screenshots of all the warning boxes for each software in question.

Check "Computer 1" on my pesonal info personal info page for this computer.

Thanks.
 

A:Audio Video Software Disfunctional Since Re-Installing WXP

Here are the attachments
 

1 more replies
Answer Match 39.06%

hi this is venkatesh, i am new to this community,i have formatted my system and install xp operating system,but i cant install my audio drivers,one error was occured named code 10 error,pls tel me how can i fix this problem,pls help me,thanks in advance....


my system configuration is


Pentium(R) Dual-core cpu
E5200@2.50GHz
1.99 GB of RAM
Intel(R) G33/G31 Express Chipset Family
Intel(R) G33/G31/P35/P31 Express Chipset Processor to I/O Controller - 29C0
Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
Giga-Byte Technology Avance AC'97 Audio
Realtek HD Audio Driver version:5.10.0.5567
Chip: Intel Corporation 82852GM Montara Host-Hub Interface Bridge (A1-step)
Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
 

A:Code 10 error when installing audio drivers

You are showing two different audio drivers:

1. Realtek HD Audio Driver version:5.10.0.5567
2.Giga-Byte Technology Avance AC'97 Audio

Delete both in the Device Manager, and restart your computer
 

1 more replies
Answer Match 39.06%

Hi there, first of all nice job on this forum, as it seems this one is one of the most active for windows 7 help. I hope you guys can help me out.
My problems began after I clean re-installed W7. My rear audio jacks are not being recognised in device manager, and plugging in my headphones won't help. I disabled my front audio panels, because the front and rear jacks cant be used at the same time and my rear jacks have surround sound options, so I'm using those.
This setup has been working fine for 4 years, with me using the rear jacks for my 5.1 surround sound headset.

Specs:
- Windows 7 Ultimate x64
- ASRock P55M PRO motherboard ASRock > P55M Pro
According to ASRock: Audio - 7.1 CH HD Audio (VIA? VT1708S Audio Codec)


What I've tried to do / done already:
- Checked volume, sound ON/OFF and all that basic stuff
- Looked at Device Manager, see screenshot.
- Updated windows with windows updater
- Checked my headphones, they still work on other devices
- I enabled the on board sound in BIOS (maybe I did it wrong?)
- Downloaded the drivers from the asrock website, however, after using the setup.exe for the driver and restarting my computer, it's as if nothing changed.
- Did the same for the drivers from the VIA website.
NOTE sometimes after restarting after setting up a driver I get a black screen prior to logging onto my desktop saying: 'General Serial ATA Driver diskette (Y/N)?', saying NO will restart the pc, and then into the black screen with the qu... Read more

A:No sound from rear audio jacks after installing W7

Sounds like something is amiss with the device itself or possibly the jacks themselves(possible hardware issue). But; i would try completely uninstalling all the devices that have the issues; reboot; and let windows try and reinstall them. If you have disks for any of the devices you might have to use the disc to load the drivers and then update them online if needed. If that does not work then it sounds like those jacks may have just bit the dust suddenly in which case you could try sending the board in to the manufacturer to have them fix it; or just get a new board which i know is not what you want to hear but if it comes down to that you may have to.

6 more replies
Answer Match 39.06%

Hello and thank you for this forum. I did see the question regarding this subject in OS/Vista but my question and OS is different.
I understand that Addictive Drums is a VST installation and I have Sony Sound Forge 9.0, Sony Acid Pro 6.0, Sonar 7 Producer Edition and Reason 4.0 all installed on one computer.
Question: How do i get any of the above to activate or recognize Addictive Drums?
Thank you for your time.
Rapeater

A:[SOLVED] Installing XLN Audio Addictive Drums 1.1

Acid Pro automatically scans VSTPlugins folder. Opened in menu. have to tell Reason to find drums in same folder. easy fix.

2 more replies
Answer Match 39.06%

I'm currently running Win XP, service pack 3.
Asus motherboard, ps4800d-x

I just had to reformat my op hd, and since I haven't been able to get any audio drivers to install. I've gotten the one listed at the Asus site for my mb, but I can only get about halfway through the install before the whole system reboots.

Any suggestions?
 

A:Solved: having trouble installing audio drivers.

16 more replies
Answer Match 39.06%

After my pc-to-monitor plug broke away from the motherboard connection, I installed an ASUS graphics card, which took over from the onboard Nvidia in my Windows XP Home Edition and restored the connection to my monitor. [IHowever,[/I] since then, I have had absolutely no sound. In "Sounds and Audio Devices" I discovered that Ati was listed as my default sound device, replacing the Realtek that was there before. It appeared to be playing in WMP, but no sound came out of the speakers.
I did all the usual things ~ checked that it was enabled, not muted, updated the driver, and any number of other suggestions found on various forums. I re-installed Realtek, but when I re-booted... TA DA..there was Ati still. I then uninstalled Ati and tried again with Realtek. Now it just says no audio device installed. OH! and right from the beginning, it had that annoying "No Volume Control Program installed" window leaping up at me when I tried to put an icon in the task bar... which many have had a problem with, I know.

After 2 months of obsessively trying to fix this, I'm ready to take a hammer to my previously beloved computer. I now have neither Ati or Realtek installed, everything is just greyed-out in the sound and audio device window. Something must be incompatible with something, but I'm completely out of ideas on how to fix this, finally.
Sorry to be so long-winded, but thought it better to be thorough off the bat. SAVE MY CHRISTMAS! (and my sanity!) Any... Read more

A:Audio gone after installing ASUS graphics card.

I'm going to move this to hardware for better assistance.
 

2 more replies
Answer Match 39.06%

Hi all,

Just had a BSOD in Windows 8 while installing the latest Realtek drivers.

Can someone check my log?

Thank-you

A:BSOD installing Realtek Audio driver

Please post to our sister site Windows 8 forums found here :

Windows 8 Forums

Cheers

Dave

1 more replies
Answer Match 39.06%

Earlier today, Windows Update prompted me to install two items: KB3035583 (recommended) and "Realtek Semiconductor Corp. - Audio Device, Other hardware - Realtek High Definition Audio" (optional). I installed both items.

After rebooting, the audio coming from my speakers could barely be heard. Changing the Windows 7 speaker icon (on the taskbar) to 100% didn't help much. The Volume Mixer applet lists the speaker icon and application icons at 100%. The Sound applet lists the speakers properties' levels at 100%. My speakers are set at their normal level; i.e., unchanged. I notice a red speaker icon on the taskbar which wasn't there before; presumably, the Realtek installation added this.

Any suggestions on how to proceed? I'm not sure if there was any Realtek software present on my system beforehand--so I'm not sure if this software is new (to my PC) or an update. The detail dialog box for the Realtek software says it was released in December 2014; this is the first I've seen it.

A:Audio volume very low after installing Realtek driver

Hi. The same issue here. Trying to uninstall the update but i do not know how to do that !!!

9 more replies
Answer Match 39.06%

Hi,
I installed XP sp2. I earlier had the same one and I used drivermax to store all the previously used drivers and imported them after re-installing XP.
But the problem is sound doesnt play. There is no volume icon on systray. I went to control panel -> sounds and audio devices. There in the "volume" tab, next to the speaker icon at the beginning it says " no audio device". And the two options below "device volume" and "speaker settings" are greyed out.

When I try to play it says: "Cannot play as theres a prob with ur sound device.There may not be a sound device installed, may be in use by another prog. or may not be functioning properly"

And the main thing is I have dual boot with Ubuntu and it works well.
Even before re-installing I had dual-boot and it worked ok.
Can someone please help me?
Thank you.

A:[SOLVED] Audio doesnt work after re-installing XP sp2

In Control Panel, Administrative Tools, Services, is the Windows Audio Service started and on automatic?

19 more replies
Answer Match 39.06%

Ok so lets get started. This is my first post.Below described is my PC's rig
AMD FX6300
Gigabyte GA-78LMT-USB3
Galaxy NVIDIA 630 2gb ddr3
4 gb ram and 500gb hdd

my problem is that I hear only one sided audio from my headphones when I connect the HD Audio pin on the board. And when I insert the AC'97 pin then I hear it opposite directions like the sound generating from left side is audible to the right side of the headphone. Also Realtek Hd drivers are not installing on my pc. I am currently using VIA drivers. Both my motherboard and cabinet's front panel supports HD Audio. I tried re installing the drivers and also tried removing graphic cards hd audio drivers but nothing helped me. Also checked the device manager. Please help me! and thanx for reading

A:Help needed in HD Audio and installing Realtek drivers.

First on the drivers. If you have VIA sound chip then you need VIA drivers. If you have RealTek sound chip then you need the RealTek drivers. According to Gigabyte this motherboard had RealTek audio.

I would suspect a wiring problem in your HD audio connection, if you only hear one side (assuming you are inserting the connector properly). Also with the AC97 issue, that also suggests a wiring or case headphone jack problem.

Do you get proper audio if you connect the headphones to the GREEN speaker jack on the rear? If you do that also suggests a problem with the front panel assembly or wiring.

One comment, I see you have Windows 7 64 bit. With only 4GB of RAM the 64 bit is not doing anything for you and in fact is hurting you as the 64 bit OS requires more memory than the 32 bit version.

7 more replies
Answer Match 39.06%

Earlier this night, I was uninstalling a few things on my computer that I did not need. I just happened to be the idiot who uninstalls his audio hardware on accident. Now, unfortunately I do not have the disk for the installation. Does there happen to be a site where I can download the installation file?
 

A:Problem Installing Multimedia Audio Controller

9 more replies
Answer Match 39.06%

Hello,
 
I installed Paltalk messenger on July 28th and I used it for a bit. After signing out and closing it, all of a sudden I can hear in the background audio that begins talking about Nuvaring and other things, it's like a bunch of ads and crap but I know it is coming from the Paltalk program since it happened right after I installed it. It also slows down the PC by using close to 100% of the CPU. I am able to get into safe mode with networking. This is how I am posting this right now.
 
This is a desktop PC with Windows XP Professional Service Pack 3, 160 GB HD, and 2 GB RAM
 
On a laptop I was able to install Paltalk use it, close it and not have that audio problem running in the background non-stop. However, when Norton analyzed the install file for Paltalk it mentioned it being safe but a bit unreliable. Any help on how to remove this is appreciated it. I tried doing a system restore to a few days before I used paltalk and on both different days the system restore was unable to be completed. I have no idea why system restore isn't working, but I was hoping it would. Thank you

A:Audio ads/ virus after installing Paltalk messenger?

 
Looks like you maybe have a Rootkit Harbinger or other malware that's causing this.
 
Give this a try:
 
 Install and run MBAM
Information about MBAM: http://www.bleepingcomputer.com/virus-removal/how-to-use-malwarebytes-anti-malware-tutorial
If this scan has been done, please post the the log into your next reply.
 

  Running TDSSKiller to obtain log
 
Note: Don't cure or delete a threat, but choose skip for all instead.
Please download TDSSKiller from here and save it to your Desktop
Doubleclick on TDSSKiller.exe to run the application, then click on Change parameters

In the Additional options: Check Detect TDLFS file system
Click Start Scan and allow the scan process to run

Choose for all threats to Skip for all of them.
Click Continue
Please post the TDSSKiller.[Version]_[Date]_[Time]_log.txt found in your root directory (typically c:\)
===================================================
 
 ESET Online Scanner
==================
Note: If your AV is blocking Eset online scanner, please temporarily disable your AV.
 
I'd like us to scan your machine with ESET OnlineScan This process may may take several hours, that is normal.
Hold down Control and click on this link to open ESET OnlineScan in a new window.
Click the  button.
For alternate browsers only: (Microsoft Internet Explorer users can skip these steps)... Read more

6 more replies
Answer Match 39.06%

I'm trying to install the latest drivers audio drivers to fix a mic static problem I am having, but the driver after it hits this point the driver gets stuck installing leaving me without an audio driver.

A:Realtek Audio Drivers stuck installing

Are these drivers from ASUS, for your motherboard? or did you get the drivers somewhere else.

That may not be the issue with the mic static, although its a place to start.

Do a System Restore back to a date PRIOR to trying to install the new drivers. That will give you a "fresh start". Try installing them again. Install them "Run as Administrator" and see if that helps.

1 more replies
Answer Match 38.64%

Ever since last night the audio on my computer doesnt work at all. I installed the drivers to my labtec webcam and ever since i cant get any sound at all. The sound drivers my computer uses are Realtek Digital High Definition Audio and i tried to reinstall them but windows gave me an error message saying the drivers weren't by a recognized publisher and it wouldnt let me continue. I cant do a system restore because there's no restore points set on my computer apparently

I'm not very good at explaining so sorry if this is a bit vague but any help would be appreciated.

A:Audio no longer works after installing webcam drivers

Go to control panel and then to sound. Scroll trough the tabs.
Make sure the "Sound play back" is set to Realtek.

Hope it helps :)

1 more replies
Answer Match 38.64%

Hi. I have a laptop with these specs:


Acer Aspire 5520
Windows XP Professional SP2
AMD Turion64(Dual Core 1.9 GHz x2)
3 GB's RAM
Realtek HD Audio
Now, when I try to install the driver for my audio, then it gives an error message: "Microsoft Bus Driver should be loaded on your system before you install Realtek HD Audio Driver !"
Now I don't know where to get microsoft bus driver from, or which version to install. If someone could help me with this it would be much appreciated.
Thanks,
-eXaByTe
 

A:Solved: Help installing Realtek HD Audio drivers - Microsoft Bus?

You need a program called Quick Fix Escalation, but you can only get it by calling up Microsoft and talking to the tech support guys. Fortunately you can find it packaged with other drivers, but I don't know any off hand.
 

2 more replies
Answer Match 38.64%

Hello guys,

I got a computer running Windows XP (SP3) with Intel motherboard (D915GEV). I currently have working sounds but I cannot use the "Stereo Mix" function to record what I hear through the speakers. I only get a short static noise every couple of seconds.

Looking in Add/Remove Programs I see these two sound drivers:
*High Definition Audio Driver Package - KB888111 (probably responsible for the working sounds)
*Realtek High Definition Audio Driver (that I see no evidence of being installed apart from the existence of Realtek folder inside "Program Files".

This is what I see in Device Manager menu (only the Microsoft UAA driver appears, no Realtek whatsoever):
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting

Plus, in the past the PC used to have AC'97 driver installed as well but I unistalled it months ago.
I tried to remove the Realtek driver but I get this annoying error:
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
I also get the same error whenever I try to launch a newer version of Realtek HD Audio driver installer, or even execute the AC'97 driver installer.

I created another (second) admin account and the uninstallation worked as it should, but back to my current account it is still present under Add/Remove Programs.

Is my Registry corrupted? Or is this about User permissions not set right?
Thank you

A:Error uninstalling/installing Realtek audio drivers

The Microsoft driver showed Realtek at the end. So you uninstalled the Microsoft/Realtek driver that was downloaded from Windows Update automatically. And the original AC97 Reatek driver is still on your computer. To reinstall it, download it from the Intel Website: https://downloadcenter.intel.com/Det...ng&ProdId=1674

8 more replies
Answer Match 38.64%

I've searched for and read many threads on forums about these two issues separately but never together, and I've whittled it down to the EXACT issue.

With my motherboard (asrock n68c-gs) i need to install the windows 7 VIA audio drivers. After doing so, the "No audio output device is installed" error disappears and I can access the volume icon. Upon reboot though, once I login I get the "C:\...Desktop refers to a location that is unavailable" error. Now this error ONLY occurs when I install an audio driver that fixes the audio output device error. It also hapened when I installed the realtek 3d blah blah driver, which also fixed the error, but not when I installed the realtek HD audio driver, which didn't fix the problem. The problem IS the correct driver installation, which has to be the most retarded issue I've experienced in the last decade.

Does anyone know how to fix this? I've had to use a restore point every time just to get the desktop back. I've tried solutions such as looking in the location where it says the desktop is unavailable, and also checked regedit User Shell Folders. The registry entries pointed to C:\Users\(my profile)\. Checking it now it gives a variable %USERPROFILE%. Is the fact that it wasn't written using the variable the problem? Thought I'd ask before I change anything. If not, any of solutions?

Thanks in advance.

A:Installing Audio Drivers Causes Desktop Location Error

Are you using the driver supplied by ASRock? If not, give that a try and see what happens.

Also, if you uninstall first, restart the PC before installing the ASRock driver.

I didn't look at the ASRock site for proper driver but I don't think VIA and RealTek are both compatible. Either you have RealTek or VIA but not both(?)

6 more replies
Answer Match 38.64%

Hello everyone.

I've had some flash sound problems for a week now, tried pretty much every possible solution and today I tried reinstalling audio drivers. Looks like I never should have done it.

I removed the old ones, downloaded latest ones for my audio card integrated in the motherboard (ASUS P5K) and installed. The drivers are on the computer, but nothing happens. I remove them and install the ones from the motherboard's CD. Then the real pain begins. The drivers won't install anymore. It just says that in bad grammar, Finnish in this case. OS is WinXP Pro.

A true finisher strike was me noticing the drivers on the CD and the latest ones I downloaded being the same drivers. I believe the soundcard integrated in the mobo is Realtek ALC883.

Can someone please tell me what is going on? This is driving me crazy
 

A:Solved: Audio drivers not installing, urgent help needed!

Doesn't anyone have an idea? :S
 

1 more replies
Answer Match 38.64%

Hi !
 
Please, inspect my system for potential malware threats that may cause this problem.
Screenshot is attached. This a log of Process Monitor before the problem occurs, if it will help: http://dragokas.com/log/Logfile_audio.zip
 
Thanks, Alex.
 
Here is a DDS' log:
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64 
Internet Explorer: 11.0.9600.17420  BrowserJavaVersion: 10.71.2
Run by Alex at 17:51:08 on 2014-11-30
Microsoft Windows 7 Ultimate   6.1.7601.1.1251.7.1049.18.8159.5803 [GMT 2:00]
.
AV: Kaspersky Internet Security *Disabled/Updated* {179979E8-273D-D14E-0543-2861940E4886}
SP: Kaspersky Internet Security *Disabled/Updated* {ACF8980C-0107-DEC0-3FF3-1313EF89023B}
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
FW: Kaspersky Internet Security *Disabled* {2FA2F8CD-6D52-D016-2E1C-81546ADD0FFD}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\nvvsvc.exe
C:\Program Files (x86)\NVIDIA Corporation\3D Vision\nvSCPAPISvr.exe
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k GPSvcGroup
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\System32\spoolsv.exe
C:\Windo... Read more

A:Access denied when installing Realtek Audio driver

Still actual. Response to instructions.

10 more replies
Answer Match 38.64%

hi all.
I'm new to this forum and i've recently installed windows 7 ultimate on my MSI vr440 laptop. after installing it i was unable to use my Mic so i installed Realtek HD audio drivers after downloading it from their website. now the problem is that i have a crackling sound coming out of my speaker.

earlier i was using Vista home edition and it too had realtek installed and i could use the inbuilt mic with ease but now if i'm talking thru the mic the person at the other end cant seem to hear me..... please help resolve this issue.

regards

A:Cracking sound after installing realtek HD audio drivers.... plz help

Download the driver from MSI and see if that makes a difference. Many times the PC vendor drivers are needed.

MSI Global ? Download Center

1 more replies