Tech Problem Aggregator

Gigabyte HDMI output to Yamaha receiver - no sound output

Q: Gigabyte HDMI output to Yamaha receiver - no sound output

GA-890GPA-UD3H (rev. 3.1)

GIGABYTE - Motherboard - Socket AM3+ - GA-890GPA-UD3H (rev. 3.1)

(Note 3) Simultaneous output for DVI-D and HDMI is not supported.

What I'm trying to do is output just my sound to the receiver via HDMI cable, but still use the DVI to my monitor for video. From the note above taken from the MB specs, sounds like this is not possible.

This is new business to me and wondering how others do this, seems little information I can find. I am ordering a HDMI to DVI cable so I can disconnect the DVI cable from the computer and instead run both video and sound through HDMI to the receiver, then the video to the monitor. Hoping this works.

If all fails then I am relegated to separate digital through S/PDIF optical link, to my receiver. According to the experts this is less than ideal since now, the multi-channel dolby and DTS signals can only be received via HDMI.

Wondering if I get a Blu-ray player for my computer how this is going to all work out. Hoping that HDMI to DVI cable does the trick.

Anyone with experience with this kind of set-up and the aforementioned hardware greatly appreciated.

And Happy NEW YEAR!

A: Gigabyte HDMI output to Yamaha receiver - no sound output

As you have a separate video card, its capabilities should determine how the video works, not the motherboard. The video is routed to the video card.

If you had some type of integrated Video on the motherboard then the motherboard's specs would apply. For example, I have an Intel i7 3770 CPU and this model has built in Intel HD4000 video which is routed to motherboard video connectors and thus the motherboard would determine how the video is distributed. However, I'm using a separate video card and thus that determines how video is distributed.

5 more replies
Answer Match 78%

My sound card (SoundBlaster Live, 5.1 digital) has an output for 6-channel surround sound. The output says its connected as follows:

"DIGITAL OUT (Front and Rear SPDIF digital outputs) via 4-pole 3.5mm minijack on rear bracket"

Here's the manual:

http://www.americas.creative.com/support/manuals/Files/SB_Live_5_1_Users_Guide.pdf

The guy at Radioshack says to use a 3.5mm to RCA left and right speaker output. But I'm not sure that's right because how would that give front and rear sound? I want to run this to a Receiver.

Anyone know what kind of connection cable to use for that? Can you give me a link with a picture.

Thanks.
 

A:[SOLVED] Digital Output from Sound Card to Receiver

6 more replies
Answer Match 106.26%

Hi, I've searched all over the place for a similar scenario but can't seem to find a solution.

The short: I can't get my pc to send an audio signal via HDMI to my Yamaha receiver. Video gets sent fine. The reason it won't send audio is because my Yamaha receiver is connected to a DVI projector and my pc can see that. Is there any way to trick or force my pc to send the HDMI audio signal for the sake of my receiver being able to receive it?

My HDMI playback device says, NVIDIA high definition audio not plugged in.

PC: HP G60
OS: WU64

Receiver: yamaha HTR-8063

Any help is appreciated.
Thanks

A:HTPC and Yamaha receiver hdmi issue

I've downloaded the latest stable driver release from NVIDIA, but now my laptop won't send a video signal to my projector, it does however indicated that my HDMI connection is fully functional, including my audio. It will not play sounds through hdmi though.

Currently downloading a fresh BETA release from NVIDIA.... and if that doesn't work I'm going to go back to the drivers listed on the HP site for my machine. Hopefully something will work.

Anyone want to take a crack at this?

3 more replies
Answer Match 102.9%

Hi there, My sound is not working. I only have a HDMI Sound output. However, I don't have any HDMI Output in my computer. I reinstalled windows a couple of times lately, but i don't know for sure if thats the problem.
Right now im using Windows 7 32-Bit, My hardware specs are: CPU: Intel Duo 2 Core. Graphics Card: AMD ATI Radeon HD 3800 Series. Any help or such will be Very much appreciated

A:Sound not working, Only have HDMI Sound Output, But no HDMI port in PC

the HDMI sound is most likely off your GPU but that series seems to not have a HDMI port so that is odd. If you can make sure your onboard audio is on in your BIOS and also run the tool on this page so that you can update all your system info for us. System Info - See Your System Specs

3 more replies
Answer Match 102.9%

Hey all,

I have a problem with the HDMI output on my laptop. I've tried to research the problem and for the most part the answer is to set the default playback device to the HDMI output. I do this, and even when I click the 'Test' button, the bell rings through the speakers of the TV, along with other system noises like error popups. However, when I try to watch movies or listen to music there is no sound from the TV. I can even be playing a song, press the 'Test' button, and it rings just fine.... but no music. It's making me and I need some help!

A:No Sound on HDMI Output to TV

I solved this by going in to the sound options on my computer (which you can access in your control panel or right click bottom of desktop speaker) then set your sound default as HDMI. thats what i did worked a treat

1 more replies
Answer Match 102.9%

Hi

I have a HP pavillion dv6 and cannot get sound to transfer via HDMI ?

I have icons for Headphones/speakers and bluetooth handsfree but no icon for HDMI how do I restore icon as i think this may be the problem ?

Any shortcuts - advise will be appreciated on my old laptop there were function keys that controlled HDMI out put surely there must be one on this system ??

Confussed

A:no sound output on tv through hdmi ??

did you download and install the hdmi drivers ? is it listed in (device manager\ sound)?
scrooge

3 more replies
Answer Match 102.9%

Hello, please help.

I have my laptop Dell Studio connected to Hitachi HDTV input, the problem is that the TV displays picture (although not in full recommended resolution, not sure why either), but the sound is not coming out from the TV speakers. The audio device manager shows as if sound is being used, the little green bars move up/down when something is being played but no actual sound is heard.

I have attached a picture of the audio device manager page to show you how is configured right now.

I'm desperate and I don't know what to do.

A:No sound on HDMI TV Output

Please somebody help!

4 more replies
Answer Match 102.9%

A while back I purchased a Creative Labs external USB sound card for my notebook.
It seems ever since I installed the drivers for the external sound card,
I am unable to receive sound through my notebook's HDMI output.
Can anyone help with this?
 

More replies
Answer Match 102.9%

Sony PC to Toshiba TV- no sound. I have used this many times without a problem. I've checked the cable and tried other HDMI inputs on TV. Computer is Sony w/ I3 chip running windows 7. thanks
 

A:No Sound - HDMI output

6 more replies
Answer Match 101.64%

I have a mobo that supports optical out, along with a GTX295 that has HDMI. The problem is, I broke the S/PDIF connector pins on the GPU, so I can't connect it to the mobo pins. I need this cable for sound-over-HDMI to work, correct?

The second question - I am connecting to TV and home theatre, by the way - is what's the go with the optical? I did try for about half an hour, but no dice. The Yamaha receiver simply didn't get any sound out of it (TV optical out works). I did change audio output in windows, tried 'HDMI - no audio' mode in Nvidia settings, etc.

Is there some sort of option that is overriding my mobo optical out with the (faulty) HDMI out on GPU? I'd love to get this working..


Edit: Third question.. I am of the belief that the optical will only give me 5.1 in games if the receiver and game are both in a supported format, e.g. Dolby something-something. Is HDMI bound by these same rules?
 

A:HDMI/optical sound output

Bumpity bump.
 

5 more replies
Answer Match 101.64%

I have laptop model HP 8530w. I got video as plug & play. But sound doesn't work until I restart. I have to keep HDMI cable connected while restarting. As soon as it works without any change right after the restart. In control panel there is audio manger indie speaker, headphone, digital audio(S/PDIF). If I change to speaker as default it works fine in laptop speaker. But same way if I set digital audio it doesn't work. It only works after restart. Also as soon as laptop goes to sleeping mode (hibernate), I have to restart to get the sound output by HDMI cable to HD tv.

How to get sound to hd tv by HDMI output without restart?
 

More replies
Answer Match 101.64%

I am astonished by how primitive the Windows 7 sound system is.

The setup:
An HDMI cable connects a Radeon HD 6870 to my Samsung TV.
I use the TV for both video and audio output.

Windows seems to detect whether the output device supports audio and how many audio channels it has. The problem is, it does that in a very unwise way.

If I turn my TV on, and then start Windows, things work fine.

Now, if I start Windows, and THEN turn my TV on, I get no audio. The only "fix" is to logoff and login again so that it re-checks the TV (now turned on), and sees it supports stereo audio output.

Even worse: if I turn my TV on, start Windows and for some reason turn the TV off, the sound gets disabled as well!

I have never seen a problem like this surface from the order of turning things on.

Sometimes I like to plug my PC into my Blu-Ray Home Theater. The wiring is very similar:
HDMI cable from the Radeon into a Sony BDV-E280 Home Theater.

It supports 5.1 audio. My card supports up to 7.1 channels output through HDMI, and I have tested two different HDMI cables.

However, added to the previously specified audio problems, for some reason Windows thinks the output source (the 5.1 home theater) has only two channels, so all I get is STEREO.

I have tried updating drivers, even downloading different drivers, searching for some hacks that could solve it at all...

I found a thread once of a guy who had the exact same problem and got it to work on Linux ... Read more

A:HDMI sound output problems

Just to add to the drama: today I left my TV on the whole evening, uselessly wasting its capacitors and shortening the screen lifetime, while I was out so that I wouldn't have to deal with the sound problem when I get back home.

That's a major OS design flaw and I haven't seen anyone that had any of these problems ever finding a solution.
Your help may help many others as well.

Thanks!

9 more replies
Answer Match 101.64%

Hi there,

new to this forum but i've been searching around today trying to find an answer to this problem i'm having.

I've bought an HDMI cable to connect my laptop to TV, i've gone into the control panel and checked that "show disabled devices" and "show disconnected devices" are both allowed and still i dont seem to get an option for HDMI for audio. The picture has come through fine, but nothing I do with the audio seems to work.

Any suggestions please?

A:HDMI Sound output issues

There might be an option in your BIOS for HDMI audio output. I have these options: Auto, Enable, Disable.

6 more replies
Answer Match 101.64%

Hi all.

I sucessfully got bootcamp to work on my iMac, and the only issue that I have run across is that I do not have any sound whatsoever coming out of my speakers.

The sound icon just remains at the speaker with a red cross, and no matter what I do, I just can't get it to work.
In Device Manager, the sound device that is being used is 'AMD High Definition Audio Device', and I can't seem to find an update for it anywhere. Under the sound area of control panel, if I go to the playback tab it says that the only available playback device is 'AMD HDMI Output', and it says that is "not plugged in".

Would anybody have any advice whatsoever? I honestly don't know what to do at this point, I have tried to search on this topic but it just always seems to lead me to a completely different problem that doesn't help me.

Thank you very much in advance.
Sky W.

A:AMD HDMI Output 'not plugged in', no sound

I've attached some photos for your convenience and understanding.

15 more replies
Answer Match 101.64%

Hello everyone,
I have a bit of a problem here. My AMD HDMI Output Audio Device is not working even though its set on default on playback devices and the computer and monitor sound is on. Was wondering whats wrong here.
My apologies if there were similar threads about this, as I just made an account and didn't get to check them up. Although I did search google and there were few cases with people that were using NVIDIA, since I'm not using it I would like to know how to solve this. I'll keep in touch and add additional info if needed. Thanks in advance.

A:AMD HDMI Output sound not working

Quote:
My AMD HDMI Output Audio Device is not working even though its set on default on playback devices and the computer and monitor sound is on


Welcome to the forum, we will try to help you. Please fill in the "My System Specs".

That statement is a little confusing. How is the Computer and Monitor sound connected?

1 more replies
Answer Match 101.64%

My playback device for my HDMI output is an AMD HDMI Output. I just got a new Bush Smart TV after cracking my old LG. HDMI output sound worked perfectly fine on my old tv and it works fine on my other Samsung TV. However the soud only refuses to work on my new Bush TV.

The picture works fine and I can see everything perfectly on the tv screen, but the sound just wont work and only works on the laptop.

Whenever I test my AMD HDMI Output with this TV, I get the error message saying - This Device is being used by another application. Please close any devices that are playing audio to this device and try again.

I don't get this error message when connected to my other TV(s). Sound and Picture works perfectly fine, yet the sound doesn't work on my new TV.

Does anyone know how I can fix this problem? I tried to update my sound driver, but it's up to date, and I've made sure that it is the correct playback device selected. Nothing seems to work though.

A:HDMI output not working (just sound)

I've got the exact same problem with a different type of bush tv, I get the same error and I cant play any test sounds
I've updated all my amd drivers,tried different cables, the tv works fine with my playstation but no sound at all from the pc.

Have you had any luck in fixing your problem?

4 more replies
Answer Match 101.64%

So ya title saays it.
but there is on thing tht i want to add is tht i hav tried going into playback devices but for some reason it says nothing bout the hdmi. It just says "speakers" and "realtek digital output".

A:Can't get sound to work through hdmi output through my tv!

I do this with my TV too

The first place I would look is to make sure that Windows detected the HDMI display properly.

Look in Device manager with the TV connected and turned on.
Click the Windows Orb (used to be the START button in XP)
Type
Device Manager
and you should see a link to click for it.

In the Device Manager window see if there is anything under
Other Devices
or if any items have a question mark or exclamation mark on them.

If you see anything like that let us know what it is and someone can tell you what to do next.(it depends on what exactly you see)

Also what kind of video card are you plugging the HDMI into? I use an ATI card.

James

15 more replies
Answer Match 100.38%

Hi, I have a soundmax HDMI Audio Intregrated Soundcard
I want to use the SOUND OUTPUT, that comes from my computers
Lets say Im using itunes, i wanna play that music to someone else through msn.
Its not working.
I've checked the settings for msn, for recording devices.
I've uninstalled, restarted, but still no.
Theres no sound coming from ANY of the microphone devices.
im using speakers as my sound device for normal audio listening not sending.
additional details please ask

thanks


adittional details

( when i go to sound, recording devices, microphone as default or line in)
there is no sound levels at the blue bar with horizontal lines, that's suppose to have green bars appearring to show activity, there is nothing on each of em i try)

A:Recording Sound With HDMI OUTPUT DEVICE

no tips?

1 more replies
Answer Match 100.38%

This is on the Azulle Access PC stick with a Westinghouse TV. Video output through HDMI is fine. But no sound goes through. TV speakers work fine with different sources, so it's not the TV.
I updated the audio driver. No change.


Here is my audio devices: http://i.imgur.com/WGsur4M.jpg

A:No sound through HDMI output - Azulle Access

I have the exact same setup, Azulle Access connected to Westinghouse TV. I'll look at my drivers when I get home. I would look at updating drivers online for I2C controllers and GPO controllers under system devices. Those all pulled new drivers. Also check the Display Adapter controller driver for updates online.

You didn't really post a screenshot of your drivers - only your sound control panel. For the actual drivers you want to look in Device Manager. Do you have any unknown devices or exclamation points in Device Manager?

0 more replies
Answer Match 100.38%

Problem: AMD HDMI output would not play sound via HDMI cable to monitor speakers.

Testing the AMD HDMI sound output gave the following error message:

Device in use by another application?

This FIX worked for this hardware configuration.

? MSI motherboard
? Realtek Audio onboard (built into motherboard)
? AMD Video board installed withHDMI cable to monitor
? See how the Device Manager sound devices should look when correctly configured below.

Issue(s):

1. The Realtek HDMI Drivers had been assigned to the AMD HDMI card under Device Manager, Sound, Video and Game Controllers.

2. There are multiple hardware devices/drivers that are conflicting.

Actions Required:

1. There are 2 instances of the AMD HDMI card that should be shown under Device Manager.

2. You must uninstall the Realtek hardware and drivers so that only the AMD HDMI device is showing.

3. The AMD HDMI and Microsoft device drivers must be assigned to the AMD hardware.

How to fix:
1. Under the Device Manager sub-heading ?Audio inputs and outputs?
? AMD HDMI Output (High definition Audio device)
? Right click and select Properties, Driver, should show driver provided by: Microsoft

2. Under the heading ?Sound, Video and Game Controllers?
? AMD High definition audio device
? Right click on the device to display the menu window
? Select Properties, Driver tab
? Driver Provider should say: Advanced Micro Devices
If t... Read more

A:FIX - AMD HDMI no sound output to monitor speakers

Originally Posted by laserlight


Problem: AMD HDMI output would not play sound via HDMI cable to monitor speakers.

Testing the AMD HDMI sound output gave the following error message:

Device in use by another application?

This FIX worked for this hardware configuration.

? MSI motherboard
? Realtek Audio onboard (built into motherboard)
? AMD Video board installed withHDMI cable to monitor
? See how the Device Manager sound devices should look when correctly configured below.

Issue(s):

1. The Realtek HDMI Drivers had been assigned to the AMD HDMI card under Device Manager, Sound, Video and Game Controllers.

2. There are multiple hardware devices/drivers that are conflicting.

Actions Required:

1. There are 2 instances of the AMD HDMI card that should be shown under Device Manager.

2. You must uninstall the Realtek hardware and drivers so that only the AMD HDMI device is showing.

3. The AMD HDMI and Microsoft device drivers must be assigned to the AMD hardware.

How to fix:
1. Under the Device Manager sub-heading ?Audio inputs and outputs?
? AMD HDMI Output (High definition Audio device)
? Right click and select Properties, Driver, should show driver provided by: Microsoft

2. Under the heading ?Sound, Video and Game Controllers?
? AMD High definition audio device
? Right click on the device to display the menu window
? Select Properties, Driver tab
? Driver Provider should say: Advanced Micro Devices
If the driver provider is wrong you will need to... Read more

2 more replies
Answer Match 99.96%

Hello! Just as a disclaimer this is the first time that I've used this cite, so I apologize in advance for any informalities, or just overall dimwittedness. So for starters, I am not a technologically illiterate person, having been a computer user for the majority of my life. My current set up is the Levovo Y50 gaming laptop, (i'll include the specs below) which is running windows 8.1. So let me explain the situation to you; I have an hdmi output to my monitor, which is being used to transmit audio and video to my external speakers, which are connected to the aux imput on my monitor. So essentially, i never both the intergrated speakers and touchscreen display on the laptop itself, rather I use the audio output to my speakers and the video output to my monitor. However, occasionally, when I hop on skype or use spotify, I feel the need to use my PC headphones, which are the razer kracken headset, which has an integrated microphone, and therefore is connected to one sole port on the laptop itself. Basically, when I choose to use the headphones as an audio output, I go to the playback devices under sound management, and change the default communications and default device to the newly-plugged in headphones, which is listed under the playback devices as the standard "SPEAKERS - REALTEK HIGH DEFINITION AUDIO DEVICE" which, I presume is the output for the laptop itself. Previously, upon changing these options, the audio would then come out of the headphones, as ... Read more

A:Solved: No output to headphones - even though sound manager shows an output

1 Welcome to Tech Support Guy
2 re your disclaimer - no need for any apologies, but your post is a little difficult to read, we would have been better with separation of the main points by paragraph spacing. However I think I have the situation
3. Lets start with the basic possible causes.
4. I do not know that monitor but the jack for the speakers is connected to the audio from HDMI input is it the 3.5mm just in case there is another jack socket
5. Please see screenshot and check levels
as if volume is right down there will of course be no sound
6. I cannot understand why the headphones are shown as the Realtek speakers they are I thought usually shown as second ouptut
 

2 more replies
Answer Match 99.54%

hi
i got a new graphics cards fitted to my pc as my last one died the new card is a Radeon hd4770 the problem is that i cant get audio sound through hdmi wire when i am sending the signal to my tv

when i go on playback option on sound config page it says ATI HDMI OUTPUT not plugged in and wont let me enable it

as anyone got any clues

A:problem with Radeon hd4770 no hdmi sound output

when you got the card what came with it? was there a wee cable a really thin one with tiny plugs on it? (its an SPDIF connector)

7 more replies
Answer Match 99.54%

Using an XPS Studio 16 recently the HDMI port I have been using to connect my laptop to my speakers has been acting up. After connecting to my speakers the output automatically shifts to the speakers, however there is no audio. When I open the volume control panel it shows audio output being sent to the speakers. So far, the only thing that has resolved this issue is a restart, however after restarting no settings changed from the time when the issue occurred.

I have made sure my speakers are searching for input from the port I have connected it to.

Any help would be appreciated. Also, tell me any information I need to give you in order to help you, help me.

A:HDMI Audio Port Showing Output w/ No Sound

When using HDMI, the HDMI needs to be set as the Default Audio Device in the Control Panel/Hardware and Sound/Sound Panel. If the "Speaker" is set as the default audio device there will not be any HDMI audio.

Best option for Dell support is the Dell community users form, Laptop Section. HERE It is a users helping users forum, like this one, and some very knowledgeable Dell hardware users there.

3 more replies
Answer Match 99.54%

I have an Acer Aspire laptop.
Playback devices show SPEAKERS - Real Tek High Definition Audio.

The computer will not play surround sound when plugged into my SMART TV. The HDMI output is not disconnected or disabled.

I think it is a driver problem. I recently reinstalled my sound drivers and now have a problem playing off this laptop onto the TV via an HDMI cable (movies, You tube,etc.) My other laptop wrks fine and the ATI HDMI output icon is alive and well

I have been screwing around with this problem for close to 3 hours and despite researching this on the Intenet, I cannot find a solution.
 

More replies
Answer Match 99.54%

I've pluged a HDMI cable from my laptop into my TV and theres no sound coming from the TV just the laptop speakers. I've tried going into my control -> sound options -> playback -> and setting the HDMI output to default but still no luck, whats listed is :

Speakers
Realtek Digital Output (Optical)
Realtek HDMI Output
Digital Output device (HDMI)

and next to each one listed is like a sound meter, the only one thats active is the speakers at the top which im guessing is the laptop speakers.
 

A:No sound output from HDMI cable in my tv, only laptop speakers

6 more replies
Answer Match 99.54%

I've just received my Laptop back from repair and all seems to be well, I had my screen panel replaced, gpu replaced(from 570m to 670m), new hard drive and CPU fan. However the problem I seem to be having is that internal speakers are completely not working.

I can see that bolume bar in for my internal speakers is actually changing but there is no sound. My system is not muted (unless there's some secret button I'm missing out on) No matter what i try it seems that sound will not work through my internal speakers, I've plugged in my Razer headset(Kraken) that works with my other computer but is not even detected when plugged in the Audio jacks of my laptop(Doesnt even pick up the microphone) and this did work before I sent it out for repair. Sound only works through HDMI output into a TV/Monitor.

Now I'm not sure if this some software configuration that I have to do or something physical with the hardware but I would prefer to not have to send it back as it would take a month to get back to me and also the repair company states that if the problem is due to software then they will charge.

I assume it's a conflict that Realtek HD audio manager is having or something but none of my devices show up on the RealtekHD Audio Manager nor do I get a pop up when a device is detected(which is what normally would of happened)

System:
MSI GT780DX
I5 2430
GTX 670m
Win 7 64 bit
8gb Ram

Edit: After some more looking around, I really do believe that what I had thought earlier was causi... Read more

A:Sound works through HDMI output but not internal speakers.

What is set as default in the Output Devices?

Right click the volume control, select output devices, set realtek audio (or speakers) as default.

Repeat for input devices to get the mic working

9 more replies
Answer Match 99.12%

Hello! Just as a disclaimer this is the first time that I've used this cite, so I apologize in advance for any informalities, or just overall dimwittedness. So for starters, I am not a technologically illiterate person, having been a computer user for the majority of my life. My current set up is the Levovo Y50 gaming laptop, (i'll include the specs below) which is running windows 8.1. So let me explain the situation to you; I have an hdmi output to my monitor, which is being used to transmit audio and video to my external speakers, which are connected to the aux imput on my monitor. So essentially, i never both the intergrated speakers and touchscreen display on the laptop itself, rather I use the audio output to my speakers and the video output to my monitor. However, occasionally, when I hop on skype or use spotify, I feel the need to use my PC headphones, which are the razer kracken headset, which has an integrated microphone, and therefore is connected to one sole port on the laptop itself. Basically, when I choose to use the headphones as an audio output, I go to the playback devices under sound management, and change the default communications and default device to the newly-plugged in headphones, which is listed under the playback devices as the standard "SPEAKERS - REALTEK HIGH DEFINITION AUDIO DEVICE" which, I presume is the output for the laptop itself. Previously, upon changing these options, the audio would then come out of the headphones, as opposed to the speak... Read more

A:No output to headphones - even though sound manager shows an output

Welcome,
My speed in W8 is much less than my speed in W7 but I'm wondering what would happen if you were to do a cold boot with everything plugged in. In the past the system does an inventory of connected devices when it boots. Sometimes on a warm boot it reads the cached inventory. Maybe . . . .
 
Dick

3 more replies
Answer Match 98.28%

I bought a new 2nd hand pc today when i put it up in my home there was no sound.When i checked the sounds it said amd hdmi output not plugged in.i checked the dxdiag and there was no sound card detected.Here is my dx diag
------------------
System Information
------------------
Time of this report: 12/24/2014, 21:02:14
Machine name: RYE-PC
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: To Be Filled By O.E.M.
System Model: To Be Filled By O.E.M.
BIOS: Default System BIOS
Processor: AMD Phenom(tm) II X2 555 Processor (2 CPUs), ~3.2GHz
Memory: 4096MB RAM
Available OS Memory: 3584MB RAM
Page File: 1944MB used, 5220MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: The file aticfx32.dll,aticfx32.dll,aticfx32.dll,atiumdag.dll,atidxx32.dll,atiumdva.cap is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
Sound Tab 1: No sound card was found. If one i... Read more

A:AMD HDMI output not plugged in,no sound card detected in dxdiag

The AMD HDMI is ONLY for HDMI audio and not for regular PC audio. Unless there is an HDMI cable plugged in, you will get the no cable plugged in notice.

Please post the motherboard manufacturer and model number. Without that I can't say what sound is on the PC's motherboard (for regular PC audio). But, if the PC audio is enabled in the BIOS and is Windows 7 compatible, Windows would install the generic, basic function, HD Audio Driver (Codec) and the PC sound would work. If the sound chip on the motherboard is not Windows 7 compatible (an old Win XP hardware) you will have to install a sound card to have PC audio.

The DX Diag, because the sound is not there, does not help.

2 more replies
Answer Match 98.28%

Hello everyone, you guys seem to know your stuff so Ill ask for your help:

I have a frustrating problem with my brand new XPC Shuttle computer. Everything works fine, just not sound. I tried hooking up the computer via HDMI to a TV for the first time as I didnt have a monitor - sound works just fine. Then later I removed the casing and installed 4 more Gbs of RAM for a total of 8. In order to do this I had to remove and reinsert the videocard. Computer was never on during that procedure.

Now, I cannot for the love of God make this computer produce sound trough the (correctly) connected audio jacks while it is hooked up to a proper pc monitor - Ive tried with numerous speaker/headphone devices which all are in mint condition (confirmed with other devices).

My OS is Windows 7 Home Premium 64 bit. In the sound manager down in the corner it said at first only "Realtek Digital Output". I figured this could mean that somehow, using HDMI cable (as it was the first monitor I used the system on) that the system defaulted on a HDMI output for sound. It would not show bars for anything else, and Speaker/Headphone devices were listed as "not connected" - despite clearly being so. It seemed at first like a problem with drivers - classic stuff. Please dont go there: Drivers are installed, up to date.

Then I launched Realtek HD audio manager and checked the box "Disable front panel jack detection" - as instructed by the program in case I had proble... Read more

A:HDMI sound output works just fine, audio jacks not at all! New PC

My problem seems very similiar to this gentleman's:

No Audio Output via Front and Rear Jacks

He seems to not have found a fix to his problem too. About my system: Could you guys look at the pictures attached to this post?

Thank you so much for any insight or help!

9 more replies
Answer Match 98.28%

Is there any driver / software (or hardware) available that can bridge the audio output for both the hdmi audio video card and the on-board sound card so that i can get sound from these two sources simultaneously?

using the audio settings in xp it only gives you one option to play sounds via one output, on my system one being the hdmi (ATI audio video card) into my HDTV which then cuts off the sound via the speaker system from my 5.1 audio from the motherboard. or vice versa.

can anyone help as i would like to have sound output from my HDTV and also the 5.1 speaker system at the same time? Cheers

More replies
Answer Match 93.66%

Hi, I am new to this forum and do not know to much about computers, so after hours of searching for a solution I decided I would try asking someone with a lot more knowledge then me. I have a Gateway with Vista Home Premium 32 bit operating system with SigmaTel high definition Audio CODEC driver with the latest upgrade. I am trying to use my s/pdif output on my computer to have audio over my home surround sound speakers via my home receiver. But when I plug it in and switch my receiver to the appropriate place I get nothing out of the speakers. From the cord I am getting the red light so I know it is getting the "power" but I am just not getting any sound. In the control panel under sound all the appropriate boxes and devices are enabled and say they are working, but I still can't get it to work. Does anyone know why this is? Is this a software/driver problem or do I need to "flip a switch" in some window I don't know about or what? My two front speakers with the single green plug work, but having them plugged in or not does not effect whether my receiver has sound or not. I have tried several different plug-ins on my receiver and none of them will pick it up, but they work with other devices, i.e. dvd player, and cable box. So I have eliminated a problem with the receiver. Any help with this would be much appreciated thank you in advance.

A:s/pdif output does not work on receiver

You have to switch to ?digital output? from the sound applet and then ? "set as default". Vista works simultaneously with the sound devices.
To have DTS or DD you have to use ffdshow or vista codec pack.

2 more replies
Answer Match 93.66%

Need some hook up help,  what type of audio cable do I need to hook up to a receiver? My receiver supports both Optical and Coaxial digital input? 

More replies
Answer Match 93.66%

So I currently have a realtek integrated and rocketfish (rebranded creative soundblaster) stand alone card. I just purchased a new Yamaha receiver and have run an optical cable from my rocketfish card to my optical in on the receiver. It seems that windows 7 only supports stereo output via any SPDIF output device. Has anyone else experienced this issue? Drivers are up to date and windows is set for 5.1 output.

More replies
Answer Match 90.72%

Hi all. Just got a new computer. Vista 64, Asus Mobo p5q-e with soundmax. Trying to use digital output to my Sony reciever... no sound. I get sound using line out to R&L on receiver and have tested receiver digital in to make sure it works.

I downloaded latest Asus Soundmax drivers as well.

I set it as default as well.

Under windows/control panel/sound, it shows as stereo, no sound output with test.

I downloaded and installed vista codec (32 and 64), not that I thought it would help...lol

Anyone have this problem or have any suggestions?

Somersjr

A:Asus p5q-e mobo, vista64, soundmax, no digital output to receiver

hey..i also got new p5qe motherboard having the same issues...it just showin 2 speakers no digital output i am getting....plz help...if resolved

2 more replies
Answer Match 89.88%

Hello guys!

I recently ran into a problem with my main LCD TV(I need to replace the power supply.) I use that LCD TV for my desktop computer, and right now all I have is my laptop. I use synergy to control both computers. However now it doesn't matter because I cannot see the desktop portion. Is there anyway for me to output my desktop computer to my laptop monitor?

Both my Desktop and Laptop have HDMI input. I also have the HDMI cord on hand right now I just don't know how I'd go about setting it up. I'd like to use synergy to control the desktop AND have it's output be on the laptop until my power supply arrives and I can fix my TV.
 

A:Solved: Output Desktop HDMI to Laptop (which has HDMI input)

9 more replies
Answer Match 89.04%

I'm trying to hook up my TV with my computer, and for the most part it's working. The video goes through and I get how to control it and everything. The only thing not working is the sound.

I'm using an HDMI to HDMI cable, and like I said the video is fine. Also, when the cable is plugged into my boyfriend's laptop, the sound comes out of the TV.

So this must mean the problem is with my computer specifically. Although, this computer is only a month old, so I wouldn't think anything is out of date.

I have no idea what's relevant, so I don't know what to post screenshots of, but I've read tons of other threads with the same issues but none of their solutions seem to work for me.

A:Realtek HDMI Output ATI HDMI Audio -Not Plugged In-

Info on your computer would help. We can only talk in generalites or suggestions without it. In most cases, if you have a full HDMI port with both audio and video, when you plug in an HDMI cable Windows changes the default audio playback device from the "Speakers" (your PC sound card) to "HDMI".

In your case the ATI (now called AMD) should be the device that is feeding the video and audio.

As your PC is only 1 month old, the PC vendor's tech support should be the ones to call since you haven't been able to find a solution to date.

2 more replies
Answer Match 87.78%

No video output on iGPU or GPU on Desktop. Motherboard not posting. GPU fan spins at 100%. I've tried removing all RAM sticks and tried each one by itself. I've removed all hard drives. I've reset GPU and tried without GPU. I feel like I've tried everything at this point. It's a new power supply. I've tried two other power supplies as well.

I can't get Dual BIOS to kick in, either (no switch on this board so I have to use the power cycling trick).

Gigabyte Z77MX-D3H
i7 3570k
AMD 6950 2GB
Silverstone 500W Strider PSU
 

A:No video output from motherboard/gpu. Gigabyte Z77MX-D3H

Hi and welcome to TSG.

Based purely on your description, it sounds like the motherboard has failed.
 

2 more replies
Answer Match 85.68%

I just bought myself a new Samsung 42 HDTV to use with my ATI Radeon HD 4350(?)

Question is, does my pc now output its graphics in HDMI, or only when i watch HD movies through it? I've looked and looked but no dice so i thought i'd ask you bunch of experts

A:HDMI Output?

Your PC outputs it's video signal via whatever cable is connecting the graphic card to the display. If you have it connected via HDMI then your PC is outputting the video via HDMI. HDMI is just the name of the interface. Whether you're watching HD movies or not, the signal is still being output through HDMI. Your PC doesn't output "HDMI". If it's connected with HDMI, then it outputs in "digital" as HDMI is a digital interface.

4 more replies
Answer Match 85.68%

Hi All

My first post :


Will be buying a new HD monitor, but I do not have HDMI out or DVI-D out from my CPU so what do I do .Right now I only have VGA output.
 

A:How to take HDMI output from old CPU which has only VGA

http://www.newegg.com/Product/Product.aspx?Item=N82E16812119395
^
there are vga to hdmi cables, but they WILL NOT WORK. you MUST buy an actual converter like above to convert an analog signal (VGA) to a digital signal (HDMI)
 

46 more replies
Answer Match 85.68%

ok recently on 1 of mu computers i brough msi geforce 9500gt with HDMI output for TV
so the problem is i dont have hdmi slot on my tv is there any chance i can get some converter cable from hdmi to svideo coaxial etc
i just want to watch video from my pc on my tv i am not rushing for hdtv yet
sorry for language i do my best

thanks guruman
 

More replies
Answer Match 85.68%

(computer specs in profile)

i recently bought a decent hdmi cable to go from my laptop to my tv, for the first few times, it worked but now i just cannot get the picture from my laptop to my computer, ive tried using FN and F1 as it is on my laptop, this doesnt work. i also tried going to 'connect to a projector' and 'connect to an external display'.. and still, this didnt work, any help will be much appreiciated.
 

A:hdmi output

6 more replies
Answer Match 85.68%

I need to connect an additional monitor to my new All-In-One touch screen desktop but apparently there is a setting to configure the HDMI port as output. Can anyone help???

More replies
Answer Match 85.68%

I've just got a new laptop a Samsung RV418, which has a HDMI output. I've tried to get a picture from the laptop to my TV but with no success. The Fn4 key only toggles between the laptop screen and an external monitor but no picture arrives on the TV.

Any suggestions on how to get the HDMI output. I've checked the HDMI cable is OK and that i have specified the right HDMI input on the TV. I am using Windows 7 Ultimate.

A:How do you get HDMI output

Hi Chris, welcome to the forum

If you right click on an empty part of the screen and select screen resolution. your TV should show up here it may need activating see piccy.

I hope this helps

4 more replies
Answer Match 85.68%

Hey, i have an nVidia Geforce 9200 integrated graphics card in my Acer X1301 system (Windows 7 32 bit). Its being used as a home theatre system that has a plasma screen plugged in via HDMI cable and the tv is connected to a home theatre system via a optical cable.

I am having trouble getting the computer to send 5.1 audio... i have plenty of 6 channel movie files and DVD's but none of them play, if i look at the sound device in device manager 'High Definition Audio Device' it is set as the default and works find using stereo... the device details say that the max channels is 2, i have tried nVidia audio device drivers, Realtek HD device drivers but all only allow 2 channels, is there a way around this???

Ive spent the last 8 hours straight trying to fix this so any help would be great!!!

Thanks, Paul.

A:HDMI 5.1 Output

  
Quote: Originally Posted by rrafluap


Hey, i have an nVidia Geforce 9200 integrated graphics card in my Acer X1301 system (Windows 7 32 bit). Its being used as a home theatre system that has a plasma screen plugged in via HDMI cable and the tv is connected to a home theatre system via a optical cable.

I am having trouble getting the computer to send 5.1 audio... i have plenty of 6 channel movie files and DVD's but none of them play, if i look at the sound device in device manager 'High Definition Audio Device' it is set as the default and works find using stereo... the device details say that the max channels is 2, i have tried nVidia audio device drivers, Realtek HD device drivers but all only allow 2 channels, is there a way around this???

Ive spent the last 8 hours straight trying to fix this so any help would be great!!!

Thanks, Paul.


Try here: Home Theater Computers - AVS Forum

1 more replies
Answer Match 85.68%

hello all,  i have a hp dv6 7029wm laptop,  and the Hard drive is starting to fail pretty hard core, so i went today and bought a SSD for it,  
 
wait first let me say this,  the screen is gone *like cracked and all white with black spots all over cause it was dropped*
 
anyways, i installed the SSD onto another computer to install windows 7, which went smooth as possible,  i put the SSD into the laptop and powered it on i hear the windows sounds and all i can see little movement on the laptop screen, 
 
My main problem is when i plug the HDMI or the VGA in, nothing happens on either screen,  So i was wondering how can i go about getting this fixed so i can install the correct drivers and have a somewhat normally functional laptop.
 
 
ive tried installing the laptop drivers while the SSD was in another computer * does not work  computer just crashs due to wrong drivers being installed* 
 
 
I cant think of anything and time is ticking with this old hdd * which i am currently using. * yes i know not the best decision ive made.*
 
any ideas i can use?

A:New SSD/No HDMI output

Could I install the basic display driver from microsoft? would that work as a temp fix till i get drivers installed

4 more replies
Answer Match 85.68%

I have been trying for 2 week, to no avail, to connect an external monitor to extend my desktop to my ASUS ET2203 through an HDMI cable to an ASUS VE245HA. My graphics card is an ATI Radeon Mobility 4570.
I have:
updated the drivers and Catalyst Command Center
Changed cables
Attempted to force output, but the only output available i through VGA, and it will not output anything
Reset my whole PC to factory setting just in case
Spent over an hour with tech support, who claims it should simply plug and play.
Screwed with the output resolutions.

Nothing has helped.

When i connect the hdmi cable to the back of the PC, there is no automatic discovery in windows.

Any help would be greatly appreciated. Thanks

A:No HDMI output

have you checked your bios settings?

4 more replies
Answer Match 85.68%

I can not get the HDMI jack to output to my TV.Is there some setting I need to be changing?I assumed it would work as soon as it was hooked up.

More replies
Answer Match 85.68%

ACER Aspire 5810TG, windows vista home premium. HDMI cable linked to Tecknika TV. Video works, sound has worked through TV until today at it won't pick up that it's plugged in. Tried rebooting. Tried disabling and enabling, uninstalling and installing Realtek HDMI output ATI HDMI audio. Out of ideas...HELP! =]
 

A:HDMI output

Can you use the keyboard fn key + another key (whichever one allows you to output the video to another screen)? If you don't know what I'm talking about, there is a keyboard combination which shows a screen that says computer only, duplicate, extend, or projector only. This allows you to direct the video, so you could have the screen show on both the computer and the tv, just the tv, just the computer, etc. It is the fn key + one of the f keys. Mine is f7, but yours probably isn't the same. Just try messing around with the fn key + one of the f keys to get the duplicate, extend, computer only, projector only screen.
 

1 more replies
Answer Match 85.68%

How can I check whether my HDMI output is broken. When I connect external display says "no signal"

A:HDMI output

Hi,Please try to hit F4. By the way: What is your computer and its Operating system ? Did you downgrade/upgrade your machine ? To help us answer question quicker, please read this:   http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/HelloRegards.

2 more replies
Answer Match 84.42%

Hello, Im having a major problem, no sound to my TV, I did a custom build using gigabyte mobo GA-78lmt-usb3 5.0 version , Im running windows 7 ult x64 and my sound does work but only after i restart my computer or simply just unplug and plug back in my HDMI cable but the sound goes away when i power off my tv and then back on, when i power tv back on i get the AMD HDMI is not plugged in and it is grayed out also a red X on my speaker icon in lower right hand corner, i have installed every driver update I even called and was in contact with tech support from gigabyte and they claim they cant get the problem to duplicate on their end, they sent me out a new board but same exact problem, and yes ive done all the obvious, new cables, plugged into diff TV im stuck and need help

A:AMD HDMI output not plugged in

you seem to know what your are talking about and doing, please help

7 more replies
Answer Match 84.42%

I have a hp pavilion g7 laptop that does not have sound. How do I fix this problem?

A:AMD HDMI output - not plugged in

Hi welcome to the forum

check the default playback device is set to the hdmi audio

9 more replies
Answer Match 84.42%

Hi there guys!Im having an issue with the HDMI output of  my laptop. Model is HP 14r-003la, was purchased 10 months ago and it came with WIN8.1.I installed windows 7 Ultimate 64bits a couple weeks ago, and after the windows update process retreived all the needed packages , I verified this issue started.So, I tried to download the video driver from the HP website, but when trying to install it, says "your computer does not meet the minimum requirements". The OS has Service Pack 1 installed.I did not find any other post with the same issue. Video is working, but the HDMI output is the problem here.Would appretiate some help on it. Thanks!! 

More replies
Answer Match 84.42%

Okay so, my computer recently crashed and had to reformat it.. lost everything

Everything was working just fine, until I had to reformat.

Now, I have no sound at all coming from my headphones and it says that the AMD HDMI Output is not plugged in.
I don't really know how to fix this..

Before reformatting, I was using these 2:
http://computerwizard.co.uk/files/wp.../vga_cable.jpg
http://www.pcforce.co.nz/bmz_cache/4...ge.281x270.jpg
But then switched to this:
http://www.konecable.com/ZenCart/images/hdmitodvi.jpg
I don't know if this can affect anything..

Here's what I have
Headphones: Astro A50
Monitor: Asus VE278Q
Graphics Card: AMD Redeon HD 7570
CPU: Intel Core i7-3770

More replies
Answer Match 84.42%

Hello all for the holidays I picked up a HD5870 the card is great no problems besides I cant figure out how to get it to send a signal to my tv

I have it hooked up to my monitor using dvi and the converter the card came with

and I am trying to extend my display or duplicate onto my hdtv I plugged the hdmi cable into my tv and my video card it picks up the tv when i start up the computer it shows me the bios and up to windows loading it does something funny though on the tv it shows a vista loading bard and on my monitor it shows the windows 7 loading screen not sure why..

If i goto Control Panel\All Control Panel Items\Display\Screen Resolution

After windows boots my monitor works but nothing is sent to my tv 1. is Sharp HDMI its on the left of the 2 it says resoultion 1280x768. and multiple displays says extend these displays

In the CCC It shows my tv under desktops and displays its number 2 if i goto configure it reads it as a SHARP HDMI 1920x1080 60hz I have gpu scaling chekced and ITC Processing checked But my tv is just black and it looks like its waiting for input.

any help would be sweet really looking to watch stuff off my computer without burning it! and playing bad company 2 on a nice tv..

I am running the latest drivers for the card and everything else on a fresh install of a windows 7 ultimate. x64 bit
 

A:HD5870 HDMI to TV no output

On my system, if I plug in my cables to send a signal (s-video) to my TV it doesn't work unless I lower the screen resolution to 1024x768 or lower (which kind of sucks, but it gets the job done).
 

1 more replies
Answer Match 84.42%

Hello everyone,
I have a problem with my HDMI output. I have a Dell Inspiron 1525, running Vista Home Premium 32bit. I recently discovered that I can hook my laptop to my 60in LG Plasma display via HDMI and do homework large and in charge. Unfortunately, it has stopped working.

Everything worked fine for a few days, I just plugged my cable into the back of the tv, clicked "Connect to Display" in my "Personalize" window from the desktop right-click drop-down menu and everything worked perfectly. I have not adjusted the refresh rate or resolution or any other setting for that matter.

When I came home from school today I repeated all the same steps but now when I plug the cable into the computer, the sound (when you plug into a port aka. dooDEE, I know, I'm nuts, just say it to yourself) keeps going back and forth between plugged in and unplugged (DEEdoo). Repeatedly over and over as if I would keep plugging it in and unplugging it again. (As if there is a problem with a driver)

I have searched all through the device manager for !'s and disabled the HDMI Audio Output Codec then re-enabled, as well as reset my plasma display to default settings. The personalize panel also cycles through "Display Connected" and "No Display Detected" during this time.

Please, if you're a guru, extend some help, if you're gonna ask if the tv is plugged into the wall, don't waste our time. Any help from knowledgable sources will be much appreciated ... Read more

A:HDMI Output Problem, PLEASE HELP

hi, have you tried updating the graphics drivers, most of the time, the drivers are most usually at fault as you've stated previously
http://support.dell.com/support/down...&fileid=245580

2 more replies
Answer Match 84.42%

Hello people,I have an old compaq presario cq60 and is running windows 7 64 bit. The problem is that when I hook up a second monitor it does not display the screen, I can see that it is being detected but nothing happens.I found an old post concerning the same issue but that one was locked so I started this new post because the link in that post was gone.I hope anyone can help.Thanks!

More replies
Answer Match 84.42%

Hi, is it possible my notebook's HDMI port to output at 2560x1080? 15-g004nt, Windows 10?Thanks.

A:HDMI output for 2560x1080?

Hi, No, it only supports up to 1920 x 1200 (or 1080). Regards.

1 more replies
Answer Match 84.42%

My laptop crashed when removing the HDMI cable... totally dead... had to pull the battery to get it restarted. Now unfortunately the HDMI output is no longer recognizing the TV unless there is a second VGA monitor connected. Does this sound like a hardware issue?

A:HDMI output not working.

Sure sounds like it.

But first, go to Control Panel > Display > Change Display Settings > and click the Detect button with the HDMI connected to the TV.

I have been operating under the assumption that you should never "hot plug" HDMI connections. Turn off the laptop and TV, connect the cable, then turn them on.

9 more replies
Answer Match 84.42%

Hi

Ive been toiling away with this problem for some time, I used to be able to get sound on my TV when I ran Vista and since upgrading to Windows 7 I have had problens. I used to be able to have sound until I ran an application and the sound would go and not come back unless a restart was done.

I tied reinstalling both audio and video drivers and now I have video but no audo at all. It is picking up my TV, and it is selected as the default device but no more sound.

Im at a total loss as to what to do except buy a new laptop or desktop. Im running a:
Product Description: Samsung R70 Core 2 Duo T7100 1.8 GHz - 15.4" TFT
Dimensions (WxDxH): 35.8 cm x 26.4 cm x 3.7 cm
Weight: 2.7 kg
Localisation: United Kingdom
Platform Technology: Intel Centrino Duo
System Type: Notebook
Built-in Devices: Stereo speakers, wireless LAN aerial
Processor: Intel Core 2 Duo T7100 / 1.8 GHz ( Dual-Core )
Cache Memory: 2 MB - L2 Cache
RAM: 1 GB (installed) / 4 GB (max) - DDR2 SDRAM - 667 MHz - PC2-5300 ( 1 x 1 GB )
Card Reader: 6 in 1
Hard Drive: 120 GB - Serial ATA-150 - 5400 rpm
Optical Storage: DVD?RW (+R double layer) / DVD-RAM
Display: 15.4" TFT 1280 x 800 ( WXGA )
Graphics Controller: NVIDIA GeForce 8400M GS
Video Memory: 128 MB DDR3 SDRAM
Audio Output: Sound card
Telecom: Fax / modem - 56 Kbps
Networking: Network adapter - Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g
Wireless NIC: Intel PRO/Wireless 3945ABG
Notebook Camera: Integrated - 1.3... Read more

A:No HDMI output on TV anymore

Ok Ive managed to reinstall my Realtek drivers and are now back to square one. I have sound until I run an application, I dont know how important it is that the ones ive been testing are games that are a wee bit old e.g. aliens vs predator gold edition, american mcghees alice, bridge commander etc.

I got max payne working with patches but now it dosnt work. can anyone help me further?

7 more replies
Answer Match 84.42%

I have a gigabyte GA-MA785GM-US2H motherboard with onboard radeon hd4200. It has built in HDMI out. The trouble that I am having is that at times, randomly it wont detect anything being detected over HDMI and will swap over to VGA mode. Best case scenario I would like to force HDMI output no matter what, if not I was able to connect a VGA cable to my display however the resolution is different. If I must do it split like this I would like to be able to run two separate resolutions. I would like 1080p over the hdmi and 1600 x 1200 over VGA as opposed to being forced to max out the VGA resolution and carry it over to the HDMI, Thanks for the help.
I have already swapped out HDMI cables.
Adam
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) 9650 Quad-Core Processor, AMD64 Family 16 Model 2 Stepping 3
Processor Count: 4
RAM: 3581 Mb
Graphics Card: ATI Radeon HD 4200, 512 Mb
Hard Drives: C: Total - 238472 MB, Free - 115504 MB; F: Total - 238472 MB, Free - 80899 MB; K: Total - 2861575 MB, Free - 874552 MB;
Motherboard: Gigabyte Technology Co., Ltd., GA-MA785GM-US2H
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

A:Force HDMI output

Output is based on a device being detected as being connected to that port during startup. If a device is not consistently being detected, there are three likely causes: motherboard/HDMI port, cable, TV/monitor.

As for using two devices, simply configure the desktop resolution/settings for each device. Windows should remember the configuration.
 

2 more replies
Answer Match 84.42%

Need a guru...
I have a newish notebook with i3 330UM and standard Intel HD graphics/video.. Has both VGA and HDMI ports.
doing testing, the HDMI port gets no ouput when the hot key is invoked.
Drivers are the latest the oem [dell] offers, there are no bangs or other issues I can find with Windows 7 x64.
There are no related warnings or errors in the event log

tried on two monitors proven good with my other notebooks - good HDTV/Monitors with known good HDMI cables set the exact same was as with the other working notebook.
The behaviour is that the system has some detection that the HDMI is there - I get a flash on the screen when plugging in and/or unplugging the cable, but cycling through the four options offered [onboard, shared, extended, projector-only] delivers nothing to the monitor. on one, my ASUS VH226, the screen displays "no signal HDMI".
no other signs/symptoms present.

Can someone explain who's in control of what: I am assuming that for all this to work, the chipset, the video drivers, the BIOS, the windows driver all have to have the device properly supported??? i'm hoping to find some way to isolate the offender.

I plan to give the recently published-by-Intel windows 8 driver a try just for thrills. not sure it will load
 

More replies
Answer Match 84.42%

Hey

So I wanted to connect my LG tv to my laptop today, and when I plug the HDMI and duplicate the screens, I can only hear the sound thru the TV, the image is blank(screen says No Signal), I've tried restarting computer with the HDMI cable and it shows the Starting Windows loading screen on the TV before you reach the login screen, but when you reach the login, the screen just becomes blank..
I have already connected it to the TV before and it worked fine, there wasn't any hardware changes and the cable is fine because I just tested it with my Blu-Ray Reader.

Any suggestions?

Thanks in advance
Quetzalma

A:Problems with HDMI Output

Please fill out your specs. Your manual is your best place to see how the LG is hooked up to a PC, not all of them use the HDMI for this most use a DVI or VGA connection, HDMI is, as you have just confirmed, used for audio if no other source is used. I have had no issues using a DVI-VGA connection to my 37" Vizio.

4 more replies
Answer Match 84.42%

Hello, I recently bought a Sapphire hd4890 and was briefly able to use the card's built in audio function via an hdmi cable to my television. I stopped for roughly a week and when I next tried to use the sound again, it didn't work. Within that period of time, I installed some Realtek drivers for my audio so I could have that cool function where when a new device is plugged in, it is detected and a menu comes up. This shouldn't pose any problem with my previous setup explained though, should it? When I right click the volume function in the Quick Launch area, and go to "Playback Devices", I am able to see my ATI High Definition Audio Device (with a picture of my television) but it says below, that it is not plugged in (im running windows 7 if that offers any help). Thanks to anyone who can lend a helpful tip in my strange predicament.
 

More replies
Answer Match 84.42%

Hello, friends!
I'm tired off looking for answer.
So I came here to look for help, I know you're smarter than me.
I have ASUS Notebook X53U - SX155V
So my problem is AMD HDMI Output - Not Plugged In . And my PC don't have sound at all. Even microphone don't work. I think it's not drivers fault, because I reinstall them for few times. But maybe I can't get the right drivers..
So.. I'm worried about this:
I think you understand, what's the problem.
And this pic (I'm not sure how to tell about it, because of bad english, but I hope you understand)
This error apears when I want to turn on songs on WinAmp

Please help me!

A:AMD HDMI Output - Not Plugged In

Uhmmm if it's hooked up to the TV you need to Disable the on board sound and the AMD card will automatically kick in

You have to disable the onboard to use HDMI sound from the card and when your done unplug and re enable onboard sound

1 more replies
Answer Match 84.42%

Hi. I've been having this problem for the past hour or so and I have no idea what to do about it. I found someone else had this same problem in another thread and as it's expired, I need help about it. Anybody have any ideas?
 

A:NVIDIA HDMI Output

any chance on getting your system specs, and a description of the problem?

Thanks

Ken J
 

1 more replies
Answer Match 84.42%

Hello Back with Big Problem.

Terrible sound lately and found out this problem. Now I did a lot of finding out and know now I need to change things in my BIOS.

Normally by using the F2 command on starting ( Dell inspiron M501R ). Well, it opens but the arrows don't work.

I am on windows 7 sp 1 64 bit. Is there any other way to get into my BIOS ???

Cannot look or listen to any thing with this horrible noise. It started from one second to the other while looking to QI.

Already, thanks for your help and time,

Thelma

A:ATI HDMI output is unplugged

Thelma just how old is this machine? - a Google is telling me it is from around 2010 so I am thinking the CMOS battery may be a tad under voltage (it controls the BIOS)

Now a few more specs would be nice too
System Info - See Your System Specs

Unfortunately I don't know of any software that will show up volts within a laptop - apart from taking it apart and physically measuring that battery with a multimeter.

9 more replies
Answer Match 84.42%

After the windows 10 update, I no longer have audio coming from my tv when i run my hdmi through it.  I have the intel 4600 graphics card with the IDT High Definition Audio Codec installed if that helps at all.

A:No Audio Through HDMI Output (TV)

Hi: See if the instructions I provided to this forum member at the link below also work for you... http://h30434.www3.hp.com/t5/Notebook-Audio/No-sound-to-tv-when-using-HDMI-from-computer/m-p/5686914... 

1 more replies
Answer Match 84.42%

So I have both a monitor and an HDTV that i want to be able to use on my PC. However in order to get one to display i must unplug the other device. Is there a way to switch between my TV and PC monitor while having them both plugged in?

A:monitor/hdmi output

have you tried right click on the desktop choose personalize>connect to a projector or other external display (left hand side)?
does the f5 key switch between displays? (when the tv is enabled)

3 more replies
Answer Match 84.42%

So I'm using an M73 Mini Tower with 1 VGA and 1 Display Port output as a PC for a dashboard that's to display stats and different data refreshing in internet browser windows. Our IT department has purchased two VIZIO 50' TVs and we have the PC mounted behind the TVs which are also mounted on the wall. We have one of the TVs connected by using a DisplayPort to HDMI cable and it has an active video signal. Here's the problem. We're trying to get the other TV connected as a second monitor through the TV's HDMI input, but the TV doesn't recognize the PC output. We've tried using a VGA cable with a StarTech.com HD2VGAMICRO converter. We've also tried a VGA to RGB converter cable which also failed miserably. Any suggestions?
 
 
Mod:  edited title for clarity











Solved!
Go to Solution.

A:M73 Tower - Output to 2 HDMI TVs

You've got that Startech adapter backwards.  It is FROM HDMI TO VGA, not the other way around.
 
You can't feed an HDMI display device from VGA onboard.  Your easiest solution is just to install a discrete graphics card (which I'm guessing you don't have in your M73).  Something low-power like this Sapphire AMD low-profile R7-250 is modestly priced, and comes with both low-profile and full-size brackets.
 
Since you have a mid-tower case, your options go beyond this suggestion, but you have to stick with a low-power card.  Somewhat more expensive is the Gigabyte GTX 750ti OC card, again with low-profile or full-size bracket.  Better performance specs than the AMD card, but you may not need its performance.
 
Finally, there is the low-power EVGA GTX 750ti SC card, which is full-size but shorter.  Best performance, but again a bit more money.
 
I don't know anything about the inside of the M73, but the description talks about "half-length full-size PCIe x16" expansion slot.  I don't know what "half-length" might imply, but the full-size EVGA card is actually the "shortest" of the three so it is actually the most likely to fit in your case.  The first two are low-profile height cards and are thus longer but less high.  All three are under 60W power and should work fine with the PSU of the M73.
 
All three of these cards have multiple digital connectors (HDMI, DP, and DVI) and no VGA connector.  The AMD ca... Read more

2 more replies
Answer Match 84.42%

My HDMI display will not give me full screen. I am allowed letterbox but my actual viewing area is cut off by 2" on top and bottom only. I've gone into display properties, tried to change size and multiply displays to no avail. What can I do to get full screen? Any  assist and input is appreciated.. gwill71731

More replies
Answer Match 84.42%

Sorry if this is a long winded question.

When I use DVI output my monitor allows me to choose from certain presets like "game" or "movie" that effect brightness etc. There is a "Dynamic contrast" preset which gives by far the best colours, however it is no good for even mildly dark scenes. However if I use HDMI output I cannot choose them as the colours seem much better and choosing the preset is not necessary, it looks as good as DVI using "dynamic contrast" and works in dark scenes perfectly.

When using DVI, I am on my PC as it has no HDMI output. When using HDMI output I am using the PS3 which has no DVI output. In both cases I am using the same monitor.

Now to my question, if I buy a DVI to HDMI cable, will the output of my PC be the same as the output of my PS3? ie perfect colours/brightness from using HDMI?

Thanks
 

A:A question about DVI and HDMI output

The answer is probably. Your monitor probably isn't smart enough to be able to distinguish between a DVI to HDMI converter cable and a regular HDMI cable. But you simply will not know for sure until you try. For some reason your TV manufacturer decided that you would not be allowed to fine tune the picture while using DVI or maybe the DVI connector simply bypasses the "fine tuning" circuits.

I have a both a DVI and an HDMI output on my video card, but my monitor (32" JVC TV) only has HDMI inputs and I'm currently using a DVI to HDMI cable to run the video to the monitor. The TV allows me to make any adjustments using either a HDMI cable or a DVI to HDMI cable, but the video is brighter when using an HDMI cable.
 

2 more replies
Answer Match 84.42%

Hi,
I can't seem to get the HDMI output on my XPS15 to work.
I connect the laptop to a Sony Bravia FullHD TV, but nothing happens.
I made sure that the HDMI cable was not at fault using another laptop, but it is fine.

Do I need to enable something?

More replies
Answer Match 84.42%

Hi there,

I'm having trouble getting my PC to output to HDMI using 32 Bit Windows 7.

When connected via HDMI the screen shows the POST/BIOS however the sides are cut off. Then it shows the 'starting windows' screen but after this it cuts off and shows 'no signal'.

I have a Gigabyte GA-EG45M-DS2H motherboard with an Intel G45/G43 Express Chipset and all of the drivers are up to date.

I spoke to someone from Intel who looked into the issue further and thought that the problem was that the driver wasn't picking up the digital part of the TV as it wasn't reading the EDID properly. He couldn't however offer a solution.

Here is what the Intel Graphics Properties Diagnostic gives:

Intel? Graphics Media Accelerator Driver Report

Report Date: 6/8/2010
Report Time[hr:mm:ss]: 20:4:58
Driver Version: 8.15.10.2119
Operating System: Windows 7 (6.1.7600)
Default Language: English (United Kingdom)
DirectX* Version: 10.0
Physical Memory: 3036 MB
Minimum Graphics Memory: 32 MB
Maximum Graphics Memory: 1326 MB
Graphics Memory in Use: 84 MB
Processor: x86 Family 6 Model 15 Stepping 11
Processor Speed: 2400 MHz
Vendor ID: 8086
Device ID: 2E22
Device Revision: 03

* Accelerator Information *

Accelerator in Use: Intel(R) G45/G43 Express Chipset
Video BIOS: 1666.0
Current Graphics Mode: 1680 by 1050

* Devices Connected to the Graphics Accelerat... Read more

A:Getting HDMI output on Windows 7

I have a similar issue with my Asus board. I ended up having to plug in a VGA cable to the motherboard. Cable doesn't connect to anything else, just the motherboard and the other end sits behind the machine.

If I unplug the VGA cable picture either starts to flicker on and off on the TV or just goes away, plug the VGA cable back in and all works great again.

9 more replies
Answer Match 84.42%

first heres my specs
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Ultimate , 32 bit
Processor: Intel(R) Celeron(R) CPU 743 @ 1.30GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 1
RAM: 1978 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 797 Mb
Hard Drives: C: Total - 238372 MB, Free - 69621 MB;
Motherboard: Acer, JM11-MS, Base Board Version, Base Board Serial Number
Antivirus: avast! Antivirus, Updated and Enabled

for some strange reason unbeknown to me my HDMI port just stoped working out of the blue the system was still under warrenty and i thought it was a hardwear problem so i sent it in for repair just got it back today but still nothing i have tried different cables and also different ports on my tv also i went to the acer site and DLed the driver pack for the VGA which had old drivers inside it installed those and still no luck not sure exactly what hardwear to remover from the devie manager to try and just reinsatll it mayb e that will work any other ideas besides a system wipe
 

A:HDMI output problem

well I want to thank all 87+ people who have viewed this forum and i just want to say **** you thanks for not helping
 

1 more replies
Answer Match 84.42%

So I had a faulty fan that had become very loud and annoying, so I disconnected it. I powered my computer back up and just got a black screen through the hdmi on my gpu (worked fine before removing fan). I switched over to the dvi on my gpu and got a display. I have tried fresh install of drivers, I have checked all hardware and cables are seated properly. I have tried 2 monitors and different hdmi cables.
I have also had 2 monitors plugged in to hdmi and dvi, I then checked nvidia control panel which detected both ports and both monitors but the hdmi still shows black.
Any help would be appreciated.
The gpu is a nvidia gtx 570
 

More replies
Answer Match 84.42%

Hello!

I have an Asus G73SW that I have been playing games with via the HDMI on my TV. It has worked fine for a while now. Today, it will not work.

It will give the Windows device sound when I plug in the cable (doo duu!) but the screen on my TV will not change. It remains "No Signal." I tested the HDMI port on the TV via my DVD player, and it's working correctly. I also replaced the cable thinking there might be some interruption, but nothing changed.

It went to:
''Control Panel\Appearance and Personalization\Display\Screen Resolution''
and tried to "Detect" and it shows "1|2. Multiple Monitors" but still nothing on the TV.
I have not installed any updates or drivers etc. Maybe I pushed the wrong FN combo in my sleep? FN/F8 shows the "Laptop" on the first press, on second press, it shows "HDMI" and the laptop screen goes blank, but no signal goes through to the TV. Previous to today, when I plugged in the HDMI, it auto detected and I never had to cycle through FN/F8.

Edit: I installed the latest Nvidia Driver setup and there was no change. I also restarted with the HDMI plugged in, but it only displayed the same "No signal." Windows mobility center does recognize the Display as being connected.

Thanks!

A:HDMI output to the TV failing.

What's the input set TO on the TV itself?

Just checking.... if it's wrong you will be working on it helplessly forever.

The mobility app and the screen res screen ARE both showing the TV as active?

I would download your laptop manual and check out the FN keys, sounds likely.

4 more replies
Answer Match 84.42%

this is driving me nuts

basically i have a motherboard with a dvi input and hdmi input.
i have my monitor connected via a dvi port
i have my tv connected via a hdmi port

however once i plug the tv in, my monitor is undetected even when i search for it only the tv is found. i have to connect the monitor via hdmi again for it to be seen then the tv will go blank obviously. is there anyway to output both at the same time?

my video card is intergrated ati 4520
my monitor is connected to the motherboard port in a weird way. from the monitor its a dvi to hdmi cable, then using a female hdmi converter into a male dvi connected to the dvi port
 

A:Pc output dvi hdmi problem

10 more replies
Answer Match 84.42%

Hi, I recently bought a T.V. from a relative. First attempt to connect my laptop to it through HDMI, my laptop screen goes black and the T.V. reads "Not supported". I unplugged the HDMI, the laptop screen remained black and could only be fixed with a hard reboot.
No progress has been made, however I've started to pinpoint where the issue lies by testing some things out:

I have had my friend plug his laptop into the T.V, that worked fine, so the only possible issue with the T.V. is simply outdated compatibilities, yet a newer laptop should be able to display something that an older t.v. could recognize.
I have tried using win+p a few times to change the display mode before connecting the HDMI cable into the laptop.
I have tried my laptop on my friends monitor, it worked immediately without having to change any settings.
I believe the main issue is in the way my laptop is sending display info to the T.V, possibly the resolution or screen refresh rate? However, it is incredibly difficult for me to troubleshoot this without any help from someone with experience in this field as my screen goes entirely black as soon as I connect the HDMI cable.

I've done some googling, people seem to have similar problems but I've yet to find an answer that works for me.

A:HDMI output not supported?

Get a hold of your freind's laptop and check his display settings:Right click desktop > Screen Resolution : note his Resolution setting, then
Click Advanced Settings > Monitor Tab : note his Screen Refresh Rate & Colors

Now go into your laptop and see if you have the same settings.

9 more replies
Answer Match 84.42%

My HDMI display will not give me full screen. I am allowed letterbox but my actual viewing area is cut off by 2" on top and bottom only. What cna I do to get full screen?

More replies
Answer Match 84.42%

I am running a Windows 7 computer with a ATI Radeon 6870 1GB graphics card. I am normaly use the DVI and speaker sound output, but when I am watching movies or playing games I like to use my HDMI output to my television.

The problem is that every time I want to hear the sound on my TV through the HDMI output, I need go into my sound settings and select my HDMI out as the defult sound output to hear the sound through HDMI on my TV.

Is there anyway for me to have my computer automatically switch to HDMI sound output when it detects the HDMI video output? This problem i am facing when i upgraded the driver from 12.3 version to the latest one and its really strange that i am facing this issue with new drivers

This used to work for me automatically when i use old version i.e. 12.3 drivers, but now i have to manually set it to default every time i change the output. Please help me out here appreciate it.

Thanks to all

A:Ati readon HDMI output ?

Normal Windows operation is to switch the default audio playback device from the Speakers to the HDMI whenever a cable is plugged into the HDMI port on a video card.

Are you leaving the HDMI cable plugged in all the time? Maybe that is the reason.

Otherwise, go to the Device Manager, Sound section and RIGHT click on the entry for the HDMI audio. Then LEFT click "Uninstall". DO NOT check the box to also uninstall the drivers. Restart the PC and when Windows starts it will detect and reinstall the HDMI sound. If there were some type of Windows corruption with the HDMI sound, this will fix it.

4 more replies
Answer Match 84.42%

Hello,

I would like to know if it is possible to get this working:

I have an HP G60 Notebook with an Nvidia Geforce 8200 M running with Vista basic 32 bits.
I have an HDMI output plug, an HD TV (CRT monitor) with component and s-video inputs).
I got a cable with an HDMI plug on one end and component plugs at the other end.

When I plug my computer on the monitor via this cable, I get absolutely no reaction, not even in the peripheral panel.

I get a short slight sound on my TV though, but nothing is showing and no further sound is heard.

I try to expand my display to a second screen into Windows display panel, but it does not do anything.

I try to force TV detection in NVidia but the box that I should tick for that is grey and I cannot activate this.

My drivers are up to date and I have tried loging in as Administrator under Vista (after having activated the admin account in cmd). No improvement.

Is it just not possible or does anybody have any idea?

Thanks in advance.
 

A:HDMI Output to Component?

16 more replies
Answer Match 84.42%

Hey guys, I have an ASUS s550C running windows 8 and my HDMI to my 32" RCA flatscreen doesn't work anymore. The cable works fine with the xbox, correct tv modes, but now as soon as I plug in the HDMI to the Ultrabook the Ultrabooks screen goes black and the tv screen says unsupported. What gives? I have tried extended, 2nd screen only, and all screen settings, 720/1080I etc. Ideas?

A:HDMI output not working

Any chance your individual problems are somehow related? Did they both happen at the same time? Did you do something right before?

Need some Windows 8 Homegroup help

4 more replies
Answer Match 84.42%

Hi allI have an HP Pavilion 15-bc000nx with Integrated Intel HD Graphics 530 and a dedicated GTX 960M (4gb). I want to use the HDMI out to use my (1080p) TV as a monitor to watch a movie or play a game while closing the laptop lid. When I do so, the game becomes very laggy and slow (unplayable).When I run Fraps it give me 60 fps !!!!This happens also when I open the lid and choose duplicate displays and adjust the resolution to 1080p, as well as when I close the lid and choose show display 2 only (the TV). In both cases.When I play the game while duplicating displays it runs ultra smooth on the laptop display and at the same time still laggy and jittery on the TV, yet both diplays give 60 fps !!!! I am sure it is not a hardware problem, but how to solve this problem?? Any kind of adjustments or settings I can modify?(N.B. I tried uninstalling the drivers and reinstalling the new ones for both intel and nvidia from HP website, also I tried another TV) Hope someone would help meThanks

More replies
Answer Match 84.42%

I have Windows 10 64-bit  (not suported I know )  but also Windows 7 64-bit (different partitions). Just obtained secondhand GNR TS702 monitor https://www.manualslib.com/manual/271588/Gnr-Ts702.html . It is plug and play no drivers. First question then is what graphics drivers should I have ? There are three listed at http://support.hp.com/gb-en/drivers/selfservice/hp-pavilion-g6-1300-notebook-pc-series/5186808/model... AMD High-Definition (HD) Graphics Driver     9.0.0.0    299.2 MB    Oct 18, 2012     AMD High-Definition Graphics Driver     8.882.2.0 Rev.    339.0 MB    Oct 24, 2011    and Intel High-Definition (HD) Graphics Driver. Does this depend on the processor ? It is Intel B960. Second question, should I expect system audio to come out of the HDMI  port and work with the speakers on the monitor?  Windows Sound sees an HDMI playback device but nothing connected to it, even when a DVD-VI cable from the monitor is connected to that port. Do I need and special drivers for HDMI audio, if I happen not to have a monitor that supports it, or is that HDMI port video only? Thanks  a lot.   

More replies
Answer Match 84.42%

I have purchased a Lenovo SL500 with a single HDMI output. I tried connecting it to my Hitachi 42" plasma tv, but can't see any picture on the plasma. When I switch to the appropriate input on the tv, the laptop makes the sound indicating it found the device, and the same happens if I switch to any other TV input, I hear the sound again indicating that the laptop recognizes the device is disconnected. In short, the laptop knows when the tv is connected, so I know there is appropriate connectivity between the two. I fiddled with the function keys for external display, but still nothing on the tv. Any help would be appreciated.
 

A:Lenovo HDMI output

Push the Function (FN) and the F7 key (there should be two little monitors or computer like icons on the key)

That will cycle the display options.
 

3 more replies
Answer Match 84.42%

After a Windows 7 Starter update my LT 40 Gateway no longer sends a signal to my Samsung TV via HDMI. The only way is if I shut them off and turn the TV on as the pc boots but it keeps reverting to the laptop screen after a while. It was working fine until the last security updates. How can it be fixed?

A:No HDMI output to second monitor

I guess it was an intermittent problem from a bad HDMI cable.

1 more replies
Answer Match 84.42%

Hi,

So eagerly i tought to buy this cool looking laptop for a huge $2000 i needed it to output to a hdmi monitor ot TV so sometimes i could see movies as well, now i had to buy the special DA200 dell adaptor and in the past 3 weeks it`s been a complete nightmare, i WAS NEVER ABLE to make it work permanently. The chat support was no help at all usually simply resuming to try and replace the part but i do think the part is good and i didn't feel like waiting 2 weeks for it to ship from china.

The ethernet and usb work on the DA200 adaptor , EXCEPT HDMI.  SOMETIMES it would work briefly until next restart, i had tried everything ever available on the internet. The laptop is running Windows 10 (as it`s restricted to that version, i tried to install other versions with lots of issues and compatibility issues) so  i have installed reinstalled and installed different versions of the video driver for all possible windowses and none worked. what did work was very brief until next restart and that usually happened when i had a fresh windows install, after the first restart i will get a non working hdmi again.  

I have tried several hdmi cables so i know it`s not the hdmi cable or the tv ot the monitor. and nobody seems to be able to help!!

A:dell xps 13 9450 (2015 new version) does not output HDMI to tv or monitor via special dell DA200 Hdmi adaptor

Oops I see my first post got sent, even if the website failed...
Anyay.. I talked to Dell Support and they told me to update the firmware for:
Intel (R) Thunderbolt 3 Firmware Update
(version 02.05.04,A00)
downloaded forn Dell.com/support
Enter your service tag and you will find it under Chipset on the driver download page.
That fixed it for me!
It was a known issue for the guy i talked to.

9 more replies
Answer Match 83.58%

I've been using an HDMI cable to connect my pc (win7 home premium 64bit, nvidia GeForce G210 video card) to my Panasonic HDTV for over 2 years. As of not so long ago (can't remember exactly when, it was around May probably) the PC and TV couldn't connect anymore.
At first i thought it was my HDMI cable that died, but I bought a new one and that didn't work either. I've tried all the HDMI inputs on my TV, downloading the latest drivers for my video card and went through all the menu's on my tv looking for settings that might turn off the HDMI functions, but without any luck.

It's driving me crazy because I haven't changed anything!

I hope somebody can help me.

Regards, drw

A:HDMI output from PC to TV not working anymore.

If you have a Input button on the TV remote use it. See if you have the proper selection. Example: HDMI 1, HDMI 2, VGA, Component 1, ect.

8 more replies
Answer Match 83.58%

I am trying to connect my JMB TV to my Dell Inspiron 7559 through the D3100 docking station. I have a picture but no audio. There is no HDMI option in the Windows 10 sound device manager. When I connect the TV directly into the laptop I have no problem with audio.

More replies
Answer Match 83.58%

Hi. My aspire E 15 worked great for the longest time but since updating to Windows 10 Ive had trouble with the HDMI output not functioning but this did not happen immediately.  Now it doesn't work. I have searched these forums and tried updating the driver and a new HDMI cable.  Not sure what else to do.   Settings are correct and configured to project.

A:Aspire E 15 HDMI output not functioning

Try going into device manager in WINDOWS 10 and look at Display Adapters, and either update, revert, or get a official Acer Graphics adapter from this Drivers Site. (Click the blue underline.)That may fix your problem, but if you have more problems, please post back here. Thank you! Don't forget to make it a solution when you figure it out!




First, CALM DOWN and look at my profile picture. Calm? Now post your message. If I helped, a Kudos would be great! Marking as solution will help others as well, thank you!

2 more replies
Answer Match 83.58%

So I'm using an M73 Mini Tower with 1 VGA and 1 Display Port output as a PC for a dashboard that's to display stats and different data refreshing in internet browser windows. Our IT department has purchased two VIZIO 50' TVs and we have the PC mounted behind the TVs which are also mounted on the wall. We have one of the TVs connected by using a DisplayPort to HDMI cable and it has an active video signal. Here's the problem. We're trying to get the other TV connected as a second monitor through the TV's HDMI input, but the TV doesn't recognize the PC output. We've tried using a VGA cable with a StarTech.com HD2VGAMICRO converter. We've also tried a VGA to RGB converter cable which also failed miserably. Any suggestions?

More replies