Tech Problem Aggregator

Blue screen if startup with HDMI connected

Q: Blue screen if startup with HDMI connected

I have a brand new MSI Media Live box. The Installation process went fine except when it came to startup after installation. I always receive a blue screen and sometime I have the "irql_not_less_or_equal" message. The system works perfectly when I startup using the VGA connector. I have verified that HDMI does work if I startup using the VGA connector and then extend the desktop.

I have downloaded and install the Windows 7 driver from Nvidia. My card is Geforce 6150. The error descriped above happened using my Philips Tv and also my computer LCD screen.

Any Ideas?

A: Blue screen if startup with HDMI connected

If I remove the HDMI cable from the computer while it is starting up and plug it in again when the login screen has appeared then this works without problems. Also works when starting up from hibernation.

9 more replies
Answer Match 66.36%

Hi all,
Toshiba Satellite U400-157
Windows Vista Home Premium Intel Core(TM)Duo CPU [email protected]; RAM 4.00GB
Display Adapter: Mobile Intel(R) 4 series Express Chipset Family
Stage 1
Laptop connected to Panasonic LCD 42" with HDMI cable
Both LCD screen and laptop monitor diplay correctly
Able to change display settings and control cursor at laptop
Everything is working fine

Stage 2 two weeks later
When HDMI cable is connected, Laptop screen goes black, but the LCD screen works fine and the cursor appears on the LCD and can be controlled by the laptop

Stage 3 two (more) weeks later
When HDMI cable is connected, Laptop screen goes black, LCD screen is blank, no cursor visible
I right click laptop screen, go to Graphic Properties>Display settings and try and change the Operating Mode: from Single display to Two
Primary Device: LCD
But these choices are not available.
I go to Control Panel> Personalization> Display Settings
Drop-down menu shows
1. Generic PnPMonitor on Mobile Intel(R) 4 series Express Chipset Family
Select down arrow
2. (Default Monitor) on Mobile Intel(R) 4 series Express Chipset Family appears

Connected HDMI cable and try again
I have two Black Screens ...!
Have tried restarting comp then TV, and vice versa, before and after connecting HDMI cable, but nothing works.
(all other independent operations on the laptop and the TV work perfectly well)

Yelp, help, please ...
TIA
Mukund
PS I did not post correctly, so I ... Read more

A:Black screen when laptop connected to TV via HDMI

Hello, Do you have another HDMI cable to try , if not, do you have a VGA cable to use ?

26 more replies
Answer Match 65.52%

Hey guys.. so I connected my other SA350 monitor from my other broken computer to my main one, and it shows a black screen. They're the same monitors, and the power to both are on. I'm on Extended, the other monitor's input is HDMI and the output port on the computer is DVI (Amazon Basics). Main monitor is VGA to VGA. What should I do? Updated system specs for your convenience.

A:Second monitor connected by HDMI to DVI shows black screen

Solved. Sorry, it seems the monitor is just Pfftt. It's dead, and it's going to the Samsung Service Center ASAP.

1 more replies
Answer Match 65.1%

Tv: Panasonic Viera E6 PC: Asus K55VM with Win8
Basically the tv cuts the corners. Can anyone help me?
Screenshot by Lightshot
Can anyone help me?
Thanks in advance

A:Tv connected by hdmi cable to pc doesnt display the entire screen

Hi and Welcome to TSF!

Is Windows set to the correct resolution?

Are your video drivers up-to-date?

2 more replies
Answer Match 65.1%

Hello,

My laptop's screen goes black when I connect it to the TV via a HDMI cable, however this is completely new as it used to work fine. I can still watch things on my TV but I have to look at the TV screen where text comes up quite small and it makes it hard to do stuff, so I was wondering if anyone would know why my laptop's decided to start doing this, and how I can get it back to both screens working at once? The volume and everything else works ok, it's just a bit annoying is all!

I have Windows Vista Home Edition, not sure of the details, but I got it just when Vista first came out.

Thanks!

A:Help needed: Laptop screen goes black when HDMI cable is connected

do you have your drivers set to "clone mode" in your CP? (the bit where you set up multiple displays

4 more replies
Answer Match 62.16%

Hi

I have a e7740 Dell laptop that bluescreens and black screens when connected to VGA or HDMI

The errors are ntsokrnl + exe + 73bc0 and Fastfat.sys + 1d82

I have attached minidumps.

Can someone help me resolve this issue please?

A:Blue Screens and Black Screens when connected to VGA or HDMI

Moved to Bsod's for further help.

1 more replies
Answer Match 61.32%

Hi All,

I just bought a marvellous new HP Pavillion DV9313 with Vista Premium and HDMI. Everything is working perfect, except the network but i've read so much about it and still don't get it to work but c'est la vie.

Anyhow, before this new notebook I had a Compaq Pressario with S-Video connection.

My Notebook is placed near my HDTV and always connected to surf, email and watch movies etc on my big HD screen.

The only thing I had to do was connect my S-Video Cable to my S-Video on the Philips Flattv and the sound through audiocable. Then press FN + F4 and my screen was always only shown on my Flattv.

I now only needed to connect an HDMI Cable from my notebook to my Flattv HDMI connection.

Incredible sound and videoquality, just perfect. But now each time I reboot or startup my notebook I have to go into my TV and Stereo cabinet and press FN + F4 so the screen of the notebook will apear only on my Flattv.

With S-Videoi and my old notebook this was a one time only action and which each reboot or startup it would go immediatelly to my Flattv.

I've tried several things in the NVidia Control Panel, like change screencofiguration ( if that's the correct translation, ( it's a dutch OS ) and selected:

1. ( First option ) Use Only 1 screen ( Standard )

2. Select the screen u wan't to use

Phillips FTV

Seemed correct but doesn't make a difference. I downloaded ( went automaticly, the new drivers or updates for the Nvidia GeForce Go 76... Read more

A:HDMI / HD Screen Startup Problem

6 more replies
Answer Match 60.9%

Debug_P25AndyGigabyte_0001.zip

Hey guys,

I have a Gigabyte laptop P25 upgraded to Windows 10. (GTX 770M)
I have a problem only after upgraded to Windows 10. When I go to plug in a display through the HDMI port, the screen flashes for a bit, then the blue screen: "video_dxgkrnl_fatal_error" . When it restarts, it can't load in system when the HDMI still in. So I need to remove the HDMI then restart it again. What does this error mean and does anyone know of a solution to the problem / had similar experience?

Thanks!

More replies
Answer Match 60.48%

I don't know that can be wrong but all time i get blue screen tried everything like reinstalling windows bought new hdd updated drivers and so on but nothing well sometime it last without blue screen few hours but anyway after that i get blue screen now i have clean windows 7 64 bit but any way i get blue screen please help me , i attached mini dump file
p.s sorry for my English

A:blue screen then pci-e connected

Please upload a full report
http://www.sevenforums.com/crashes-d...tructions.html


Code:
atikmdag.sys Fri Apr 24 06:51:57 2009 (49F199CD)
Update your video card drivers -
AMD.com | Support & Downloads


Code:
Rt64win7.sys Thu Feb 26 04:04:13 2009 (49A65B0D)
Update your Realtek drivers -
Realtek

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests


BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Fri May 6 12:53:00.616 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:50.943
Probably caused by : ntkrnlmp.exe ( nt!KeQueryCurrentStackInformation+84 )
BUGCHECK_STR: 0xA
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_0xA_nt!KeQueryCurrentStackInformation+84
BiosReleaseDate = 01/15/2010
SystemManufacturer = BIOSTAR Group
SystemProductName = GF8200E
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Fri May 6 12:51:16.869 2011 (UTC - 4:00)
System Uptime: 0 days 0:14:12.585
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4987d )
BUGCHECK_STR: 0x1E_c0000005
PROCESS_NAME: crossfire.exe
FAILURE_BUCKET_ID... Read more

9 more replies
Answer Match 59.64%

hey guys im new to this forum so sorry if this isnt where im ment to be posting but i still hope u can help (Y). so um well as of yesterday everytime my computer turns on and picks up the internet it blue screens . whereas if the wireless is turned off its fine. this happens as soon as i enter my password i get blue screen then it restarts the process again below is a message im getting i tried searching it but found nothing that really made any sense.

stop: 0x0000008E (0xC0000005, 08CF9759B, 0x8AC9AO3C, 0x00000000)

all help is appreciated so thanks in advance

A:blue screen when internet connected :S

What changed? Did you try a system restore back one day before it happened?

7 more replies
Answer Match 59.22%

One of our computers, running Windows XP, has something wrong. I suspect a virus.

When it turns on, it goes to the Welcome screen and then the BSOD.

Being the knowledgeable chap I am, I tried Safe Mode and it starts up perfectly fine.

Other than that, I have no other information unless you want what the BSOD says.

Thanks for any help.

A:Blue screen of death on startup, normal startup on safemode

24 hours... *bump*

3 more replies
Answer Match 58.8%

Hi there,

My current problem occurs only when I am connected to the internet. After about 10-15 minutes of being connected my PC will crash and show the blue stop error message detailing:

STOP: 0x0000008E (0xC0000005, 0x83A170E9, 0xF0CBF6C8, 0x00000000)

Also upon start up, two error messages are displayed:

1: Error loading C:\Windows\Update.dll
The specified module could not be found.

2: Failed to start LClock.:5

...and finally explorer.exe sems to take up about 20-40% of my CPU even when I'm not using it.

I'm not sure what other information is required, but here is my HJT log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:14:50, on 15/5/2552
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.5730.0011)
Boot mode: Normal

Running processes:
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\savedump.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\cmd.exe
C:\Program Files\WIDCOMM\Bluetooth Software\bin\btwdins.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\alg.exe
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\VistaDrive\VistaDrive.exe
C:\Documents and Settings\Administ... Read more

A:PC crashes and gives Blue screen when connected to the internet

12 more replies
Answer Match 58.8%

I got a new monitor and moved my main monitor as my second display (as my old second display went out).

When I powered the PC on the 2nd display is pure blue screen (not BSOD). It is not a tint but as if the background is pure blue. If I try to move stuff over to it I can't see it, as it is going behind it.

I have updated video card drives, removed and rediscovered in device manager, checked nvidea settings, tried VGA instead of DVI, swapped ports on the video card (stays with monitor).

Background is not blue, I can drag my mouse over and its like it goes behind the blue screen.

My video card supports multiple displays, I was using two before I got this new one and just swapped one out.

Extend these displays is what I have chosen in screen resolution.

In screen resolution I have both monitors showing as 1 and 2 , and dropping down display it shows both monitors as to what model they are BENQ V2400W and BENQ XL2420T.

Attached picture of what its doing, anyone experienced this before?
 

A:2nd monitor pure blue screen, but connected

9 more replies
Answer Match 58.38%

i disconnect the HDMI cable from my Asus laptop and put the laptop on sleep ....and when i want to resume the screen goes blue or black if i do it immediately
it happens every time i have to cut out the power and turn it on so that it works again.
Can anyone help me?

More replies
Answer Match 58.38%

I have a Lenovo laptop, the big sturdy one that my company gave me.
Whenever I tried to connect it with the hotspot wifi from my LG phone, the dead blue screen just popped out and the computer got restarted.

Any idea what's wrong

A:dead blue screen when connected to hotspot wifi

Moving to Bsod's for further help

1 more replies
Answer Match 58.38%

Hello,
 
I found some malware on my PC 6 weeks or so ago. My computer was making the usb connected/disconnected beeps even though all drivers were updated, and I would get BSODs referencing my kernel file. I found the two malware items with malwarebytes and removed them and their extensions in google chrome, and all has been well until recently. I heard the usb connect/disconnect sound far less, and hadnt had any blue screens in over a month, but now it's back. I've run malwarebytes and it isn't finding any malware on my PC. Is there anything I can do to fix this?

A:pc plays the usb connected/disconnect sound followed by blue screen

Welcome aboard   Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2. SecurityCheck may produce some false warning(s), so leave the results reading to me.NOTE 3. If you receive UNSUPPORTED OPERATING SYSTEM! ABORTED! message restart computer and Security Check should run Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeList Restore PointsClick Go and post the result. Please download Malwarebytes Anti-Malware (MBAM) to your desktop.NOTE. If you already have MBAM 2.0 installed scr... Read more

3 more replies
Answer Match 58.38%

My brand new desktop with Vista Ultimate 64 bit SP1 installed has been having blue screen crashes when any USB hub (eg the USB hub of my Dell 2408WFP monitor or a Belkin external powered USB hub) is connected - but crashes only on shut down or restart only- outside of that- it works as expected- but cannot use it properly for not wanting to have these crashes every time I shut down/restart

I get the blue screen error message which includes:

*** STOP: 0x0000007E (0xFFFFFFFFC0000005, 0xFFFFFA6003D52709, 0xFFFFFA600CFAB878, 0xFFFFFA600CFAB250)

*** usbhub.sys - Address FFFFFA6003D52709 base at FFFFFA6003D37000, DateStamp 479199e5


and then dumps memory

the minidump files indicates it's a USB device- & through trial & error I have proved it to be USB hub specifically related, though ultimately a fault with Vista

these USB hub devices are listed as 'Generic USB Hub' in Device Manager and these devices don't have these problems when connected to my old Windows XP Pro machine I'm trying to move on from - please help- this is still happening after installing the OS twice & Service Pack 1

I tried installing these files (Update for Windows Vista for x64-based Systems (KB941600):

http://www.microsoft.com/downloads/d...displaylang=en

but wouldn't allow me to do so as it says 'the update does not apply to my system'- why not? it's for Vista 64 bit?

I hoped this would work as it mentions fixing problems with standby- which I also have- I ca... Read more

A:blue screen crash when USB hub connected (on shut down/restart only)

Hello

I have the same problem, except my vista crashes when I'm using the computer for hours at a time, not on shutdown/restart. Can't help with that.

However, you said you can't bring the system from standby by moving the mouse or pressing any key. Go to control panel and then power options: on the left panel you can modify the settings for how to wake up the computer from standby etc. and also "require password on wakeup" The default is that you need a password! You can just turn it off.

2 more replies
Answer Match 58.38%

hi!!!! i really need your help i had my wireless broadband connected yesterday and 10min. after blue screen appears

now every time i plugged the internet blue screen appears but when i unplugged blue screen doesn't appears

I really need your help please help me

A:vista home basic blue screen when connected to net

"...you may see some recent files with a DMP extension in the \windows\minidump folder on that machine - one for each of the reboots. They're memory dumps each corresponding to one crash/reboot sequence.

If you copy a few of the latest DMPs out of that folder and into another directory, then zip them up and upload them here, someone might be able to analyse them for you and tell you precisely why the machine is crashing and rebooting. "

1 more replies
Answer Match 57.54%

Good morning too you all.

I recent encounter a problem in one of our clients.
They have two Acer Travellmates 4500, with Windows XP Service Pack 2, with 512 MB of memory.
What is happening is that after a reinstalation of Windows (with deleting partions, and creating new ones), when they are connected to the internet and opening a new excel, the laptop gives a blue screen.
I didn't have the chanche the log to see what is it.
Anyone have any suggestion of what could cause this?
Lack of physical memory?

Thanks

Paulo Becken

More replies
Answer Match 56.7%

Hi there,

I have been stuck with the above issue for the last couple of days and would appreciate some help asap. In reflecting on the above the comp. is at the point where it is continuously restarting. I was able to insert the installation/required disk it was asking me for earlier and was able to open up to a screen resembling safe-mode. However, I can no longer do this on my own or through "start-up repair".

If it is helpful, in reading the start-up repair screen and seeing, "windows cannot repair the comp. automatically" as well as looking throughthe "problem details" I see recall seeing possible registry errors such as, "rollback registry"

If this can not be fixed or is not a quick fix I am also open to the idea of reseting/reformatting the hard drive but only if I can recover some files using open-source software such as recuva or the like.

Appreciate the help
 

More replies
Answer Match 56.7%

Hi, thanks for checking my question. I haven't found an answer to my particular situation:

Dell xps m1430 laptop w/vista (32).

It all started with a blue screen w/scrolling text after the fated restart. The blue screen text said "if this is the first time you've seen this message..." and then comp restarted, again showing the blue screen, then restarted into windows repair mode, after repair mode tried to fix the problem comp restarted, then the screen went black / blank right after the little windows loading animation (where the bar keeps moving from left to right and there's a small windows logo).
It all happened fast, so there may have been steps I forgot, but that's the jist of it.

Now screen always goes black / blank during startup after the windows loading animation, so I can't start windows in normal mode.
I can start in safe mode if I manually force shutdown by holding the power button, so I'm not imploding with fear... ok I am.

Possible causes:
1. This occured right after installing 11 vista updates (that restart was when I saw the blue screen)

2. Also occured the restart after running a patch called "Vista TCP/IP and UAC AutoPatch 6.0" I downloaded it from softpedia, the developer was listed as defcon, and their website listed was securevista.net, but the site is down(I found this out after the problem occured). The patch had lots of positive reviews, and lots of people on other sites also suggest using it to re... Read more

A:Solved: Black screen of death at startup, all began with a blue screen

7 more replies
Answer Match 56.7%

i'm sorry but i've had it. so here is what happens:
1. first you should know i had to take my pc to the shop, bought a new hdd and reinstalled windows xp service pack 3
2. I press the power button, windows start loading, sometimes a blue screen appears and if you wait long enough a welcome screen and that's it. Sometimes is goes past the welcome screen, it loads normally and freezes after half an hour. I took it to the shop and it worked fine there. Brought it back home, still blue screen etc. It start normally if i unplug the monitor. Sometimes, if i plug it back in, the monitor start normally, other times it just stays black. i'll give you any information needed, but it will take a while since i don't have the heart to restart my pc this many times. i think in the last two days i've restarted it like 50 times, no kiddin'.

ok. thank you.


System:

AMD Sempron(tm) Processor
3000+
1.80 GHz, 512 mb of RAM

Monitor:

Samsung, syncmaster 943sn

Graphic Card

nvidia geforce 210
Also, here are some errors, warnings from the system log:

The NVIDIA Update Service Daemon service failed to start due to the following error:
The system cannot find the file specified.

The DNS Client service could not contact any DNS servers for a repeated number of attempts. For the next 30 seconds the DNS Client service will not use the network to avoid further network performance problems. It will resume its normal behavior after that. If this problem persists, verify yo... Read more

A:Blue screen at startup, freezes at welcome screen, works when monitor unplugged

It seems to me that you might have a bad/dying power supply unit.

How long have you got the computer?

Take it to the shop and let them test it.

1 more replies
Answer Match 56.7%

Hi all,

Starting yesterday my computer would go through startup... while loading the desktop it would crash to blue screen with white text (unfortunately, I can't remember the exact error message). If restarted, it either goes to a blank black screen or back to blue, and I could only get the computer to operate in safe mode with networking. My antivirus software (avast free, malwarebytes)scanned and found no infections.

I have Windows 7, Samsung laptop.

Today, I was able to start the computer normally and am functioning with internet (still acting a little funny), but I am sure something is still not right. I also did a system restore last night, with the same problems (crashing, not starting up).

Any assistance would be highly appreciated!

Thanks in advance,

Brit

PS: I (goofily) started a similar topic in the "Windows 7" forum section without knowing this section was down here... Sorry! I tried to delete the topic/post but couldn't. Thanks.

A:Blue Screen with Error Messages, Blank Black Screen on startup

Hello,I will be helping you with your problems. Please be patient while I assist you.Some points for you to keep in mind while I am helping you to make things go easier and faster for both of us Please do NOT run, install or uninstall any programs, unless instructed to do so.
We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability. Please do not attach logs or use code boxes, just copy and paste the text.
Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post. Please read every post completely before doing anything.
Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process. Please provide feedback about your experience as we go.
A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At the top of your post, click on the Watch Topic Butt... Read more

14 more replies
Answer Match 56.7%

Hello.

Just today, I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : \windows\system32\config\system."

You can attempt to repair this file by putting the winxp cd in etc...

Now when i turn on my computer there is just a black screen showing, with nothing at all on it.

Any ideas anyone?

Thanks very much for your help.
 

A:Blue screen of death, boot problems, black screen startup

It's a nasty error that requires some persistance and resourcefullness to overcome without a clean install.

If you have a Windows CD or have the recovery console installed, you might want to have a go at these directions.

http://support.microsoft.com/default.aspx?scid=kb;EN-US;307545

Forum example of a successful recovery here:

http://forums.techguy.org/showthread.php?s=&threadid=195985
 

3 more replies
Answer Match 55.86%

Hello, I'm not sure why i have such long start up screens, or what information you may need. But after my blue screen i log back into windows 7 RC and this shows up:

Windows has recovered from an unexpected shutdown

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7057.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: a
BCP1: 0000000000000010
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF800030471C5
OS Version: 6_1_7057
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\011110-187466-01.dmp
C:\Users\Steven\AppData\Local\Temp\WER-241005-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Highlights - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:Long Startup screen and Blue screen every 2-3 hours

We need the dump - otherwise try Who Crashed:

Resplendence Software - WhoCrashed, automatic crash dump analyzer

5 more replies
Answer Match 55.02%

I was able to transfer the hard drive to another HP laptop I have and it started fine and installed the drivers for it on startup...

The problem happened yesterday after gaming for a while, restarted the computer and BSOD came up after the black windows starting screen. I could get in with safe mode but only for a few moments before the computer just automatically shut off, like someone just pulled the power to it...

I checked with BlueScreenView on this computer and saw bug check string SYSTEM_SERVICE_EXCEPTION bug check code 0x0000003b which according to microsoft is "linked to excessive paged pool usage and may occur due to user-mode graphics drivers crossing over and passing bad data to the kernel code."

If someone could look at the files and hopefully some ideas how to fix it, would be great thanks

A:Help please - Blue screen after windows startup screen

bump?

8 more replies
Answer Match 54.6%

My girlfriend has had a few problems with her computer over the last few days with a virus, her computer would freeze when she tried to install programs and her virus scanners wouldn't open.

Last night when she tried to turn on her computer it kept blue screening and this happened when attempting to access safe mode too.

She tried to repair windows and it didn't detect her hard drive.

Any suggestions?
 

More replies
Answer Match 54.6%

Yesterday morning, when I started up my computer, it went to a blue screen and I haven't been able to determine how to correct it yet. I have tried to boot from the XP disc, but it's like the computer will not read it. I changed the BIOS defaults to CDROM and still nothing. Please help!

A:Blue screen at startup

can you see the drives listed correctly in the bios

tap f8 when booting and from the options try

last known good configuration

safe mode

15 more replies
Answer Match 54.6%

After I login to my machine, a blue blank screen appears and stays for 3 to 4 minutes and then my windows startsup.
I searched in the net for the reasons of Blue blank screen in Vista home premium.
I was asked to install Regcure. I did the same and tried but as its only a trial version, I cannot fix it.
But it scanned and reported lot of problems in COM/ACTIVE X category and uninstall category.

Kindly help me with an optimal solution for the same
 

More replies
Answer Match 54.6%

Seems my computer problems are not quite at an end, sadly. :/

My laptop won't boot normally- it'll appear to but give me a blue screen before finishing startup. The error screen reads that I should check if software is properly installed, to contact the software provider for updates, etc. It also has this: "IRQL_NOT_LESS_OR_EQUAL" near the top. At the bottom reads "Error: 0x0000000A (0x00000000, 0x0000001C, 0x804E1BP8)"

This started last night, and I think it has to do with the FLV converter I was downloading at the time. Upon clicking on the .exe, the entire computer froze for a moment before giving me that error screen. I can boot into Safe Mode and have already tried to use System Restore to fix the problem to no avail.

Any help/advice is appreciated greatly.

More replies
Answer Match 54.6%

My Dad is running Windows XP Media Centre edition and intermittently gets a blue screen of death during start up (see attached photo). The blus screen contains the following error:
stop 0x00000022 (0x000202EF, 0x81FA82D8, 0x81FA8220, 0x822E5008).

Can anyone tell me how this can be fixed, please.

Thanks,

Hoogie
 

A:XP Blue Screen on startup

It's a relatively undocumented "file system" error of some kind.

http://msdn.microsoft.com/library/default.asp?url=/library/en-us/w2kmsgs/1149.asp

Any luck starting in Safe Mode or Last Known Good Configurtion from the f8 boot menu?

If you cannot boot at all and you have an XP CD or the ability to load the Recovery Console I would run

chkdsk /r

on the drive.

http://commandwindows.com/recovery.htm
 

1 more replies
Answer Match 54.6%

I borrowed my in laws computer while mine is in shop with anti-spyware soft virus which finally took it over.It is a dell with xp about 2 years old. After downloading my mouse software I restarted and everything seemed fine until I brought it home and turned it on.Now upon starting it sometimes goes to the windows screen for a second and than to blue screen,other times it just boots into the blue screen. It says on the blue screen among other things that a problem has been detected and windows has been shut down to prevent damage. It also said to check any newly installed software for updates.I should say the mouse was working perfectly. I deleted the mouse software in safe mode and hooked up the dell mouse however the blue screen still comes up on startup.I called the mouse people and they said it is a microsoft problem. Their is technical information that comes up in blue screen it reads as follows: ***Stop:oxoooooo71,oxoooooooo,oxoooooooo,oxoooooooo,oxoooooooo. Any ideas on how to fix this?

A:Blue screen on startup

So you can boot into safe mode? if so then please boot into safemode with networking and do the following:Download BlueScreenViewNo installation required.Double click on BlueScreenView.exe file to run the program.When scanning is done, go Edit>Select All.Go File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.

6 more replies
Answer Match 54.6%

Whenever i startup my computer and i see the black windows screen and you can see it loading, after 10 seconds this BLUE screen comes up. I didn't install any new hardware. I have those 6 boot disks, but it says the second disk has a problem...this is the message, File \ntkrnlmp.exe could not be loaded. The error code is 7. Setup cannot continue. Press any key to exit.
The blue screen says.

A Problem has been detected and windows has been shutdown to prevent damage to your computer
UNMOUNTABLE_BOOT_VOLUME

IF this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

***

***STOP;0x000000ED(0x82AF1E30,0xC0000006,0x00000000,0x00000000

btw, im using a public computer
 

A:BLUE screen, can't even startup

6 more replies
Answer Match 54.6%

Hi everybody, I generally experience this crash at morning when turning on , it's weird to occur only unplugging power supply after waiting 2 minutes repeated again. Anyway after rebooting 2 times loading os no problem untill unplugging powersupply. I'm sure that ram, hdd,cpu work fine , ı have suspects on mobo and graphic card. I reinstalled win7 but nothing had been changed and I swichted all usb devices to diffrent ports . I updated all drivers same situation.
I'm sorry for my poor English.

Thanks

OS - Windows 7
? x86 (32-bit)
? Wİn7 ultimate
? OS an OEM version
? 3 years old
? 15 days ago

? E2180
? 9800 gtx amp
? Gigabyte p35 ds3r
? Tagan 380 watt psu

?OEM PC

A:Blue screen on startup

Hello and welcome to TSF!

The driver is in the BSOD is a Nvidia driver... update your nvidia drivers from their website. If that doesn't work then download Driver Sweeper and go into Safe Mode with Networking... run Driver Sweeper and delete all Nvidia drivers you can find, restart in Safe Mode with Networking then install the latest Nvidia drivers again. Restart in normal Windows mode.

I have to say you power supply is not good enough for your video card and you should consider upgrading to a Corsair 650w.

17 more replies
Answer Match 54.6%

I installed RC1 a couple months ago and it was working great. Today quite randomly my computer froze. I held the power button down and turned it off, but now it won't start up again.
At first the only thing that happened was the computer would turn on but the screen would show nothing. I turned it off again for a couple minutes and tried again. This time it got to the windows starting screen before flashing a blue screen and restarting. I tried doing windows repair, but it gets stuck on loading files, or it goes to a black screen with a red bar at the top.
Safe modes and last good config all get blue screens.
When i do the disable auto restart option it gives me two separate blue screens.
The first one i got said Bad_Pool_Header and the second one says a device driver was trying to corrupt my system.

any help would be greatly appreciated.

A:Blue Screen on Startup

Hi cornisnice, welcome to the forums.

When you restart, unplug any/all USB prepherals and see if that has any effect on your startup then report back.

Also, did you install any new software/hardware before the crash?

Hope this helps




Jeff

9 more replies
Answer Match 54.6%

Last night my computer froze and so i had to do a cold reboot, it came back onto windows fine however my mouse and keyboard wouldn't work. I checked the wiring and it was all okay so i did another cold reboot and everytime my computer would try get passed the dell sign it would blue screen. It is almost impossible to catch the error code as the blue screen goes away before it is able to show it. Automatic repair couldn't fix it and ive done a system restore and refresh which both got me into windows but as soon as i restarted i got the same boot problem again. Any ideas on what this may be? 
I havent downloaded anything recently and my last update i did would of been a week or two ago. Help anyone?  

A:Blue screen on startup?

Boot into the Advanced Boot Options.
 
With the computer off, press the power button and immediately start tapping the F8 key and continue until the Advanced Boot Options open.  You will see an image similar to the one below.
 
 
 
You will need to use the up or down keys to navigate the pointer where you want it to be, the press Enter to make the selection.
 
Choose Disable automatic restart on system failure.
 
Restart the computer and tell me what happens.
 
With the computer off, press the power button and open the Advanced Boot Options again, then choose Safe Mode.  
 
Does the problem persist when you boot into Safe Mode?

9 more replies
Answer Match 54.6%

hi,

im hoping someone can help me out of a jam. my dell laptop has been working very well until now....when it refuses to load windows, instead stalling with a blue screen on every attempt to load. the bluscreen tells me that windows was unable to load, and says "unmountable_boot_volume." under the heading "technical information" it says:

0x000000ED (0x83346030, 0xc0000006, 0x00000000, 0x00000000)

i have no idea whether that is relevant but included it in case it is.

i know i was short on memory, and im wondering whether windows is refusing to load because of that....or whether a virus has taken over me computer (!). ive tried loading windows in every safe mode, in last known good configuration....is there a hotkey to load the DOS prompt before windows, to try and edit the windows registry from there? is there anything i can do short of reformating and reinstalling windows? if anyone knows how to deal with this, please, PLEASE give me hand.

many thanks,
dwight
 

A:blue screen on startup

bump for you; these are all I found on the topic,
http://support.microsoft.com/?kbid=297185
http://www.microsoft.com/resources/...Windows/XP/all/reskit/en-us/prmd_stp_woft.asp
 

3 more replies
Answer Match 54.6%

I've been living with this problem for a while now. Whenever my computer starts up (whether it's a reboot or just a normal boot), I receive a blue screen with just this text:

STOP c0000139 {entry point not found}
The procedure entry point ntoskrnl.ExiAcquireFastMutex could not be located in the dynamic link library HAL.dll

This is the only text on the screen and it does not seem to be creating a crash dump. The problem started at least a month ago, and I don't have a restore point from when it happened so I can't do a system restore. I also don't think it is malware because it only started after I turned off the computer in the middle of an update.

Once I recieve this message I just reboot and it boots up fine. I've run scans with both avast home edition and spybot, and the problem still persists. I have a lenovo thinkpad x61 tablet running vista business sp2. Any help would be great.

Thanks,
Daniel

A:Startup Blue Screen

Sounds more of a software issue. Formatting your computer would be your best bet. Also, virus scan in safe mode.

2 more replies
Answer Match 54.6%

I have a PII 300 MHz with 128 MB (4x32MB) a HP CD-writter 9100 serries and Toshiba DVD-Rom w/Decoder Card. I have Windows 98 SE with Yamaha sound card and Ambient chipset modem. At startup, I get a blue screen with the message:

FATAL EXCEPTION 0E HAS OCCURRED AT 017F:BFF83BFC

i HAVE RE-INSTALLED WINDOWS AND PLAYED AROUND WITH MSCONFIG, BUT STILL GET THE BLUE SCREEN.

need help, thanks

angelP

 

A:#$@&* Blue screen at startup!

Try booting up in Safe Mode and going to Control Panel>System>Device Manger tab to look for any indications of problems such as yellow ! or red ? by any of the devices. If none are found, you may have to start trouble shooting by physically removing unnecessary cards such as modem, sound etc... With only the necessary video, memory and floppy/hard drive/cd installed. If it boots correctly, you replace 1 card at a time until it fails again. You should, prior to this extreem measure, make sure all cards, memory and cables are seated securely.
 

1 more replies
Answer Match 54.6%

Ok straight to the point. My computer is Blue Screening right after the windows boot logo, with the error "Page Fault in Nonpaged Area", stop code of 50 and no file name listed. The same happens when I try safe mode, but I am able to get into windows using debugging mode, under which some things crash the whole system.

The same thing happened a few weeks ago which I was able to recover from by using a combination of windows repair, UBCD4Win, a lot of cursing, windows updates and tweaking. But I'd rather not do that again. At the time I didn't try debugging mode till after I used windows repair.

I think it might have been caused by some malware, as some strange things happened right before each time. I'll get some help with that after I get windows booting normally again ;)

I can provide any extra information needed.
Thanks for any help.

More replies
Answer Match 54.6%

I am getting the blue screen right when my computer starts up. Usually within 30 seconds after starting.

Windows Vista SP1
Locale ID: 1033

My PC is BRAND NEW. Have been using it a week now with no problems until today.

Any help is appreciated!
 

A:Blue screen after startup

9 more replies
Answer Match 54.6%

My friend has this problem, where whenever he boots up his computer, it comes to a blue screen. Some of the things it says is:

STOP: C0000218 {REGISTRY FILE FAILURE}
The registry cannot load the hive. (file:
\systemroot\system32\config\software
Or its log or alternate.
It is corrupt, absent, or not writable.

Beginning dump of physical memory:
Physical memory dump complete.
Contact your administrator technical support group
for further assistance.

Got any clues to what this is?
 

A:Blue screen upon startup?

1/Restart your PC

2/ Keep tapping the F8 Button until a menu appears

3/ When the menu appears use the UP and DOWN arrow keys to select the ‘Last known good configuration’ option.

4/ Once selected press Enter

5/ Your PC should now reinstall the ‘last know good configuration file’

6/ Restart your PC and see if the problem has been solved
 

1 more replies
Answer Match 54.6%

i'm using vista home premium and i faced blue screen on startup and i did all what guys told me (cleaned RAM, installed registry cleaner softwares like AVG tuneup 2011, itunes utilities 2011.... all are registered products), but no improvement seen ... all report that there is no problem even hard disks are working well......what should i do???
i thank you all 4 ur help

A:blue screen on startup

Hi and welcome to TSF I have moved you to Bsod's and app hangs for more help,please do not use reg cleaners they can be more harmfull than helpfull.While your waiting please follow the instructions here http://www.techsupportforum.com/foru...ta-452654.html

1 more replies
Answer Match 54.6%

I have a gateway G6-350Mhz 32MB and 6gig Hdd, with cd-rom and 224x10x40 burner. After the burner was installed, I get a blue screen at startup that says" Invalid VxD dynamic link call from CDUF(03) + 000002EB to device "08B", service 1. Window confiration is invalid. reinstall windows. At the bottom of this screen, It ask me if I want to continue. When I choose yes, another screen that says "A device or resource required by VFAT is not present or is unavailable. VFAT cannot continue loading.

I re-installed windows but nothing changed.
Need help bad! Thanks guys
angelP
 

More replies
Answer Match 54.6%

What happens for me is I can't even start up my computer because i get the blue screen as windows starts up. I don't know if my hard drive is still going to work or not. Anybody know what to do?
 

A:Blue Screen at startup

We need to move you to a separate thread -- for any kind of help at all.

But what does the blue screen say? There will be an error type and maybe a driver? Have you tried Safe Mode and Last Known Good configuration?
 

3 more replies
Answer Match 54.6%

Heres what I got

Athlon 64 2800
MSI K8mm-V Mobo
256 mb ddr 400
CD RW
DVD ROM
Floppy
Seagate 80 gig SATA
WD 20 gig EIDE
XP Pro
Im trying to run windows xp on the sata drive,
I have installed xp via bootable disk, but when attempting to load xp
a blue screen pops up and says "windows was stopped from loading to prevent damage to your system" and then following an error number with lots of zeroes and threes. I have plugged the SATA drive into another computer and was able to format, partition and add and use files from it. So theres a 70% chance its not the hardrive itself

Any ideas guys?
AIM = Rockjay420
 

A:Blue Screen on Startup

The error number actually contains the codes that should tell whats wrong.

Pity we dont know what it is.
 

3 more replies
Answer Match 54.6%

Hey guys.

This afternoon i DL the latest patch 3.3.5 for World of Warcraft, but when i started up the game it crashed and the whole computer with it.

When i turned on the computer again, right before the logon screen it showed blue screen saying that an error had been found and windows had been shut down to prevent damage. It has done this a couple of times before random (not associated with wow).

But now it keeps on doing it, right before the logon screen appears :O I tried starting it in safemode and uninstalled wow but it didnt solve the problem. Every third time or so, the logon screen appears and it starts up fine with no problems though, so it seems pretty random
I also tried running the startup repair tool, but it didnt work either.
Also sometimes the resolution gets messed up (set too 400*600 or something) when the logon screen finally appears after a couple of blue screens.

It came up with this:

"Problemsignatur:
Problem name: BlueScreen
OS-version: 6.1.7600.2.0.0.256.48
countrystandard-id: 1030

More information of the problem:
BCCode: 1a
BCP1: 00041284
BCP2: 05D51001
BCP3: 00000A83
BCP4: C0402000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files, helping describe the problem:
C:\Windows\Minidump\092110-24523-01.dmp
C:\Users\Niclas\AppData\Local\Temp\WER-38547-0.sysdata.xml"


I have had some problems with it overheating some times, could that have anything to do with it? maybe... Read more

A:Blue Screen at startup! :(

  
Quote: Originally Posted by Niclas1199


Hey guys.

This afternoon i DL the latest patch 3.3.5 for World of Warcraft, but when i started up the game it crashed and the whole computer with it.

When i turned on the computer again, right before the logon screen it showed blue screen saying that an error had been found and windows had been shut down to prevent damage. It has done this a couple of times before random (not associated with wow).

But now it keeps on doing it, right before the logon screen appears :O I tried starting it in safemode and uninstalled wow but it didnt solve the problem. Every third time or so, the logon screen appears and it starts up fine with no problems though, so it seems pretty random
I also tried running the startup repair tool, but it didnt work either.
Also sometimes the resolution gets messed up (set too 400*600 or something) when the logon screen finally appears after a couple of blue screens.

It came up with this:

"Problemsignatur:
Problem name: BlueScreen
OS-version: 6.1.7600.2.0.0.256.48
countrystandard-id: 1030

More information of the problem:
BCCode: 1a
BCP1: 00041284
BCP2: 05D51001
BCP3: 00000A83
BCP4: C0402000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files, helping describe the problem:
C:\Windows\Minidump\092110-24523-01.dmp
C:\Users\Niclas\AppData\Local\Temp\WER-38547-0.sysdata.xml"
I have had some problems ... Read more

3 more replies
Answer Match 54.6%

I just started my Dell the other day and as the subject says, it didn't boot and went to a blue screen which said something along the lines of.

PDEngine.exe application error
could not be written "0x7c918fea" to memory "0x000000010

it gave me options to start in Safe mode and a few others or to start at the last point where everything was ok. I choose this option and windows started without a hitch and I didn;t notice anything out of place or missing. I've done a few restarts since then and nothing out of the ordinary has happened since.

BUT, then today I was loading some more programs on my recently formatted laptop. One of them being Perfect Disk 8 (trial) and WinPatrol alerted me to the startup entries. One of them being PDEngine, the other PDAgent

I'm assuming Perfect Disk caused this error on the Dell. Anyone have any Idea as to what may have happened...now I'm afraid to use the program on either comp.

Any help/insight will be greatly appreciated.

Thanks,
Andre
 

A:Blue screen at startup!

If that happened to me I would uninstall the program and not use it again. A disk defragmenter needs to be reliable or it can trash your system.
 

3 more replies
Answer Match 54.6%

If in the event you have a Bluescreen first try this:~

A driver is a program that controls a device. Every device, whether it be a printer, disk drive, or keyboard, must have a driver program. Many drivers, such as the keyboard driver, come with the operating system. For other devices, you may need to load a new driver when you connect the device to your computer.
So, if you added a new device or updated your computer you will very likely need to update your drivers...

Goto Start click on it
Goto Computer right click on it
Click on manage
Click continue

This opens a new window called 'computer management'
Scroll down to device manager and click on it.
On the screen is a list of all your 'DEVICES'

Ok, start at the top and work your way down
Right click on each device and click on properties.
Up pops a little window that says this below:~
Click this bar to view the full image.



Click on drivers
Then click on update...
Then do that for every driver and you should not have a Blue screen...
Do this once a month!

All the best
Trax

A:If you have a Blue screen at startup first, try this!

Gonna give it a try.

4 more replies
Answer Match 54.6%

Essentially my task mangers usage %'s were seeming suspicious so I downloaded a free antivirus called Immunet and ran a flash scan.It promptly detected services.exe as malware and automatically quarantined it after which the computer automatically shut it self down citing some error at which point the computer doesn't reach the login screen even in safe mode before it blue screen saying some thing similar to "a critical process failed to start or was terminated" I understand this means I probably have a fairly serious virus problem but getting the computer to start up is my main priority.

A:blue screen on startup

You might scroll down to some of the comments by users concerning this product.

http://download.cnet.com/Immunet-Protect/3000-2239_4-10965674.html

Seems more likely a software problem than a malware situation, IMO.

System manufacturer and model?

Do you have any disks which came with the system?

What circumstances led to your desire to use this product?

Louis

20 more replies
Answer Match 54.6%

I don't know what I installed or did wrong lately to have this blue screen to keep popping up when I open the computer. It happens randomly, but more frequent as of now. The blue screen says "Windows has come to a problem and shut down to prevent future damage to your computer," or something of that nature. Then it further goes into saying that I should check my computer if there's enough physical memory. I have a total of 70.3 GB total HD space, and 17.3 GB is free, how can it be the physical memory problem? I have 512 MB RAM, in which about 250-300 is free, and the remaining is usually running. The problem sometimes doesn't even pop up at startup, it sometimes pops up when I'm working on the computer. This error shutdown is sometimes accompanied by lagging, or is followed with multiple programs functionally at very slow rates.

What can be the problem and how can I fix/approach it?
 

A:Blue Screen at Startup

16 more replies
Answer Match 54.6%

I recently dusted out my computer as it was overheating like hell. It made the fan stop working for a few minutes (not unusual, this computer is terrible) and when I finally got it to start working it blue screens on startup. error starts with STOP: 0x00000024 and some stuff in parentheses that I'll write down later if you need it. It's a blue screen that i've never seen before as it's shorter than normal, only half the screen actually has text.

Even weirder, and to help prove that it's not a hardware problem, I can boot into linux without any issues on the same computer, same hard drive.

EDIT: okay, so apparently it's a common dirty NTFS issue. Still, any ideas what to do?

EDIT 2: I have done some linux ntfs crap and all I get is: partition is already mounted or refusing to work with partition, so no luck there.

A:Blue Screen on Startup

Hi -Please do the following as it will provide us with more information.Please download BlueScreenViewNo installation required.Double click on BlueScreenView.exe file to run the program.When scanning is done, go Edit>Select All.Go File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.Thank You -

10 more replies
Answer Match 54.6%

windows is driving me nuts

any and all help would be appreciated here...

This all started yesterday when I somehow managed to get a trojan on my computer. I went through various ways of trying to take it off and finally decided to restart in safe mode and try to fix the damage from there. I selected /SAFEBOOT in msconfig and restarted. Now the computer boots to a blue screen displaying the IRQL_NOT_LESS_OR_EQUAL error code, along with STOP: 0x0000000A (0xF79A2354, 0x000000FF, 0x00000001, 0x804E2E41). All signs point to this being a software problem as my hardware has not changd recently. No matter what I select (safe mode, last known good config, start normally), I get the same blue screen. The only things I can access are BIOS and recovery console (with boot CD). I'm fairly computer literate but at this point I am completely stumped... help please!?

A:Blue screen on startup

also, I have another computer that I can put the hard drive into and all the files are still accessible in that way, so if there is some way to fix it through that method, it is an option...

2 more replies
Answer Match 54.6%

Hello.

Yesterday I started to get a blue screen error on start up with the error message "page fault in non page error". At first it was only every so often but today I can not boot the system at all now with out blue screen coming up saying that or "registry error". But I can still get into safe mode ok.

I ran a memory check and it found no issues. Can anyone help me out.

Thanks.

I am using Vista with SP1.

Spec's:

2.4GHz Duo Core
4GB DDR2 RAM
Nvidia 8800

A:Blue Screen On Startup

Try here.
Error message when you start a Windows Vista-based computer: "STOP: 0x00000050 PAGE_FAULT_IN_NONPAGED_AREA --support.microsoft.com

All it says is to obtain the latest service pack for Vista.

Have you recently installed any new hardware? I ask because if you can boot in safe mode, there's a possibility that a device driver might be causing the fault.

6 more replies
Answer Match 54.6%

Hi guys, so today I turned on my computer and after the loading screen this weird blue screen popped up. It was there for about 30 seconds then my computer restarted. I've attached pictures of it I managed to take before it restarted.
So I'm looking to see if anyone knows what this might be and what I should do if it's something bad.

Thanks in advance.

A:Odd blue screen on startup

Hi Shadow3 & Welcome to the forums ^_^,

Are you able to get to the desktop? According to the pictures, it seems that it is probably related to hardware. Did you try resetting the BIOS options to Default Settings?
Do you hear the sounds of fan when the system starts? If you cannot hear anything, is there any airflow at the air vent which is generally present at the sides of the laptop or at the bottom of the laptop?
-Pranav

3 more replies
Answer Match 54.6%

We have had a blue screen upon startup for over a week on our computer.  We think it is caused by the removal of a driver or a windows update.  This is the statement we get....
A problem has been detected and Windows has been shut down to prevent damage to your computer.  Here is the technical info:  STOP:  0X0000007B (0XFFFFF880009A9928, 0XFFFFFFFFC0000034, 0X0000000000000000, 0X0000000000000000)
 
There was an automatic update which was downloaded before the crash.  But.... before the windows update, my husband deleted a driver (from a backup drive) because it was continuously asking to have an update downloaded. 
 
If you can help guide us through this, we would be so thankful!
 
Thanks,
Danielle

A:Need help with blue screen at startup!

You can try going into the menu and selecting windows update, it will check to see what may be needed.  Just download the priority ones, you can go back for the others if you have the need.  It may or may not help but can't hurt.

2 more replies
Answer Match 54.6%

When I turn on my computer it shows a blue screen. At the bottom of the screen is a message that says" STOP: 0x00000067 (0c00000001, 0x00000009, 0xC0000035, 0x0000000) ". I've tried going into safe mode but every time I try my computer restarts. This started to happen after a windows update. I've also tried the startup repair several times, but it didnt work. Please help.

Also, I'm very bad with computers.

A:Blue screen upon startup.

Hi shelb105,

I would suggest trying a system restore point.. Or if comfortable with losing all data, restoring to factory condition. What you want to do is access your computer and find this folder:

C:\Windows\Minidump\

You must zip and post back those files.

1 more replies
Answer Match 54.6%

Hi
A while back my laptop gave me a blue screen and when I tried to restart it, it would begin to start up but after the Windows logo came up the screen would go black and then stop.
I have tried safe mode which won't work, and reinstalling the OS (Vista) but neither work, it would start and make noise for a while but then stop completely.
If anyone has any ideas on what could be wrong or how to fix it, it would be much appreciated. Thanks.

A:Blue Screen and no startup

If you give the blue screen error code it would help a lot.

3 more replies
Answer Match 54.6%

I have a desktop running Vista Home Basic SP2 (32-bit). The PC began to take noticeably longer to get to the screen where I enter my password. Then I began to notice that it took longer for my desktop to appear after I entered my password and hit "enter."
I started the habit of waiting a minute or longer before I would enter my password and hit Enter. (I noticed that when I did this the desktop would appear shortly after- more like when it was new.)
Today, there was a blue screen for about 10-15 seconds before the desktop appeared.
Can this be remedied? Does it mean I have a virus maybe? Any advice would be appreciated.

A:Blue Screen During Startup

It sounds like it could be malware of some sort. Go talk to the outstanding folks over at the Virus/Trojan/Spyware Forum. You can find them HERE! They are the best!

READ THIS Before Posting For Malware Removal Help.

Best wishes!

Mike

5 more replies
Answer Match 54.6%

Hello,

The other day my computers screen randomly turned blue and my computer started to reboot itself over and over, only to get another blue screen and reboot itself again over and over.

Also, I can't access any commands because my keyboard won't work upon startup, it only starts to work once I'm in windows, which I can't access because my computer gets a blue screen every time. I have another keyboard (an older one), if I use this one will I be able to access the commands?

thankyou

A:Blue screen on startup

I'm not sure what kind of information you need, just ask and I'll try to get it for you.

3 more replies
Answer Match 54.6%

hi guys i've been trying to fix a blue screen issue which happens once windows starts to load, before the problem it was infected by vista antivirus 2011 and i managed to delete that, but now this....
i've tried system restore, startup recovery and a recovery disk all have not worked, anyone have any more ideas ? ? ?
 

A:Blue screen on startup

Try starting in safe mode then re-starting comp in normal mode ,hope that helps
 

2 more replies
Answer Match 54.6%

I have recently been getting a blue screen when i start up my computer. The error message on the blue screen says "page fault in non paged area". It then asks if I want to start windows normally, or in safe mode or other options. I start it normally cause I don't know what to do to fix it. I haven't added new software, so I don't know what happened. Can someone help me?
 

A:Blue screen on XP Pro startup

Have you tried checking your RAM??
 

1 more replies
Answer Match 54.6%

Hi All,

If anyone can help on this...PLEASE PLEASE Do...

When loading XP and after logging in a Blue Screen Appears STRAIGHT Away... IOFILECANCELOPEN is prominant throughout page. It asks me to start in safemode by F8, but when I hit F8 it only appears with "Start Boot with... 1) Floppy 2)HDD 3)CDROM 4)Disk...

How do I get Safemode and has anyone had this before?? I think its probably a virus which I got d/l'ing from Limewire last nite, 80's songs so It probably serves me right

Any help really appreciated
Graham
 

A:XP Blue Screen on Startup... HELP!!

7 more replies
Answer Match 54.6%

Hi, recently I've been having an issue where when I start up my computer goes to a blue screen after it says welcome and then restarts indefinitely. I can run safe mode fine, I got this error report and was wondering if anyone could help me with this issue.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8007A2B010
BCP2: FFFFF8800FF4C9E0
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Thanks for any help

A:Blue screen on startup

  
Quote: Originally Posted by remeth


Hi, recently I've been having an issue where when I start up my computer goes to a blue screen after it says welcome and then restarts indefinitely. I can run safe mode fine, I got this error report and was wondering if anyone could help me with this issue.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8007A2B010
BCP2: FFFFF8800FF4C9E0
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Thanks for any help


We need the actual DMP file created when the computer crashed. use these to find and upload them. http://www.sevenforums.com/crash-loc...d-problem.html

thanks

Ken

3 more replies
Answer Match 54.6%

alrighty, so, a last week I turned the power off, turning off my computer, I don't do this often, but w/e....before that, I hadnt run any new programs or anything...

then, the next day I tried to turn it on, and a black screen came up saying blah blah blah and told me to pick an option if it said the power went out start windows normally, I did, then after that, a blue error screen came up telling me there was an error and to delete any new programs or whatever, and although I didnt I couldnt get past that screen..till ever...what should I do?

I can gve the exact error codes I have a dell dimension 3100 desktop, are there any backups or w/e I can use? I really dont care abot any of my files...im new to this type of stuff lol, thanks...

Any help means a lot to me, I know this is my only post but remember im a real person, so just dont close this thread or w/e if its in the wrong place move it, thanks again guys.
 

A:Blue Screen On Startup

The information you receive is in direct proportion tot he information you give:

"black screen came up saying blah blah blah..."
" a blue error screen came up telling me there was an error.."
" can gve the exact error codes..."
"remember im a real person..."- so are we and we're not mind readers.

Give us something to work with and maybe we can help.
 

5 more replies
Answer Match 54.6%

Hello,
Two days ago I switched my computer off as usual and went to sleep however when I woke up and switched it on it started to blue screen with it saying 'Page fault in nonpaged area'
I have done a few hours of reading around and realised that one common cure isn’t viable so i am going to ask for help here.

My rig is home built in January
mobo : Gigabyte 890gpa-ud3h
gpu : sapphire hd5770
ram : 4 gig corsair xms3 (2x2gig)
cpu : amd phenom 2 black edition 955 3.2ghz

I initially thought it could be a ram fault so I had 2 spare sticks of 2 gig matching ram to test, same bluescreen. I then tested each of the sticks one at a time in port After that I took out my gpu and tried again to only result in the same bsod.

I have used the BSOD Dump & System File Collection app (EXE file) and have it in a file attached to this thread. I tried the system health report but i came up with the error of wrong file thread or something. I forgot to write down the actual reason o.O.
Anyway any help would be hugely appreciated on the matter. Cheers in advance,
nick

A:Blue screen on startup.

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests

If all tests pass then enable driver verifier - Driver Verifier - Enable and Disable

When you get around to it, you need to update to SP1 - Learn how to install Windows 7 Service Pack 1 (SP1)

BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16792.amd64fre.win7_gdr.110408-1633
Debug session time: Tue May 24 10:48:01.529 2011 (UTC - 4:00)
System Uptime: 0 days 0:01:20.199
Probably caused by : ntkrnlmp.exe ( nt!HvMarkDirty+c0 )
BUGCHECK_STR: 0x50
PROCESS_NAME: services.exe
FAILURE_BUCKET_ID: X64_0x50_nt!HvMarkDirty+c0
BiosReleaseDate = 11/24/2010
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = GA-890GPA-UD3H
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16792.amd64fre.win7_gdr.110408-1633
Debug session time: Tue May 24 10:32:37.287 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:55.957
Probably caused by : ntkrnlmp.exe ( nt!HvMarkDirty+c0 )
BUGCHECK_STR: 0x50
PROCESS_NAME: services.exe
FAILURE_BUCKET_ID: X64_0x50_nt!HvMarkDirty+c0
BiosReleaseDate = 11/24/2010
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = GA-890GPA-UD3H
??????????????????????... Read more

1 more replies
Answer Match 54.6%

Running 1.8 gig win xp My computer is starting to show a blue screen after the initial startup.
So far it has booted completly after about 1 minute, but I am getting worried.
No problems during the day / only after shutdown and restart in morning.
The computer is about 3 years old.
Can I do any tests to determine whethe the hard drive is failing?
Any suggestions?
 

A:Blue Screen After Startup

16 more replies
Answer Match 54.6%

Hi I cant run my pc because after I type in my password to windows 7 driver installation starts for my mouse and keyboard which causes a blue screen.
It also hapoens on safe mode and it worked before ... started having this problem when I replugged all the cables after doing some exterior cable managment.
*** STOP: 0x0000007E (0xFFFFFFFFC0000005,0xFFFFF880060D86E8,0xFFFFF880037D95A8,0xFFFFF880037DE00)
*** isub3xhc.sys - Adress 0xFFFFF880060D86E8 , Datestamp 56742d4e

More replies
Answer Match 54.6%

Hi guys,

So I am getting a blue screen of death on start up, within 15 or 20 seconds after the computer reaches the desktop it blue screens. The safe mode seems to be working so I am using that currently to post here for help. Whenever it blue screens the only useful information that it gives is the stop code 0x0000001E (0xFFFFFFFFC0000005, 0xFFFFF00227E15A, 0x0000000000000000, 0x000000007EFA0000) if that helps any. Also, I ran some scans while in safe mode (Malware Bytes and AVG) and I remember both of them finding some issues (trojan of some kind). The scanners said that they removed them but the blue screen still persisted. I am using Windows Vista 64 bit. Would it help to attach the minidump file? Or post something with the program Blue Screen Viewer or something like that, I saw some other post mention that. Any help would be appreciated, thanks!

A:Blue Screen on startup

Download BlueScreenView:
http://www.nirsoft.net/utils/blue_screen_view.html
unzip downloaded file and double click on BlueScreenView.exe to run the program.
when scanning is done, go to EDIT - Select All
Go to FILE - SAVE Selected Items, and save the report as BSOD.txt
Open BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

OR

If you think malware is to blame you can post in the AM I INFECTED forum on this site.

6 more replies
Answer Match 54.6%

Earlier this year my computer suffered a liquid coolant leak that destroyed basically every chip in the case. As it was still under warranty, I had it repaired by the folks at cyberpower for free. It was returned however with my RAID configuration undone, and only one of my hard drives had been formatted and retrieved, while the slave drive was still filled with the files from before the incident, including an inert copy of windows (I say inert because the computer boots from the other drive). Today I got it in my head to format this drive so I could proceed in filling it with all the media garbage files eating up space on my master drive. Bad move. Now, after booting to my desktop, my computer crashes to blue screen about half way through filling my system tray.

I have tried using my OEM disc to repair the problem, but it seems that it is not with windows directly. Running in safe mode doesn't seem to cause any problems. Fault bucket 462809357 is the error I'm finding in my application event history time stamped around the time of the blue screen failures. I'm not completely opposed to wiping my hard drive, but I am sort of attached to the way I have it set up now. Enclosed are my 3 most recent mindumps to help diagnose the problem.
 

A:Blue screen AFTER startup

I would have thought that formatting the unused drive would not have done anything, since it's no longer in use in a RAID configuration. Strange.

I can't say that I know what happened there, but someone who has a better knowledge should be around to help. I wish you luck.
 

1 more replies
Answer Match 54.6%

When I turn on the computer, it says that it cannot start properly and gives me those options like "start in safe mode", "start normally", etc. but no matter which option I choose it blue screens before or on the xp loading screen. The STOP number is: 0x00000024 (0x00190203, 0x87358828, 0xC0000102, 0x00000000)
What do I do?

More replies
Answer Match 54.6%

Hi there,

I have a compaq laptop and until recently it was ok, now when I turn it on it starts up ok and then a blue screen pops up stating that a problem has been detected and windows has been shut down to prevent damage.

the message goes on to say to check adequate disk space/video adaptors/BIOS updates.

Under technical info. it says:
STOP: 0x0000008E (0xc0000005, 0x821661E1, 0xf8853234, 0x00000000)

then it tells me that physical dump is complete.

Please help me Im not great at the tech. side of computers and this is really bugging me as Ive hundreds of photos in the computer.
 

A:startup then blue screen

This is actually the same blue screen I get (albeit at a different location)

Stop: 0x0000008E (0xC0000005, 0x8056EBA4, 0xAA5D998C, 0x00000000)

There is no other information provided with the BSODs (other than what was provided above), and I've tried to make sense of the Event Viewer and minidumps. No guud!

I can run safe mode on the system in question, and even with networking with no problem at all

Ah! and if the second parameter is usage, the PCI bus on my mobo is the only thing that uses that.
 

2 more replies
Answer Match 54.6%

Hello everyone,

Thanks for taking time to view my thread. I let my brother borrow my laptop and now it doesn't work. This is whats going on: After the Dell logo comes on the screen automatically goes to safe mode options w/o me tapping F5 key. If I choose safe mode or normal mode it begins to load up then a blue screen pops up and reads:

"A problem has been detected and Windows has been shut down to prevent damage to your computer.

UNMOUNTABLE_BOOT_VOLUME

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advanced startup options, and then select Safe Mode.

Technical informaion:
***STOP: 0X000000ED (0x857D0E30, 0x000006, 0x00000000, 0x0000000)"

Thank you in advance.

-jdaries-
 

A:Blue screen at startup...

7 more replies
Answer Match 54.6%

So I am using my roommates computer at the moment. As the description states, I am getting Blue Screened upon entering my desktop. It's not a hardware malfunction, as I can enter Safe Mode without a problem.

Everything started about 2 days ago. Probably something from TPB, as I torrent often, just not from there, unless I can't find what I need from a more secure place (obviously never doing that again). I downloaded and ran Kasperky. It seemed find a decent amount of threats, thought the problems were over. Now I'm not really sure what to do.

Current System:

4 GB DDR2
Intel Core 2 Duo 2.0 GHZ
Win7

Access on my computer is extremely limited on non Safe Mode startups, roughly 10 seconds at desktop before Blue Screen happens.

Thanks for reading.
 

A:Blue Screen After Startup

Realized I could boot in Safe Mode with Networking.

HJT Log:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 9:08:51 AM, on 12/7/2010
Platform: Windows 7 (WinNT 6.00.3504)
MSIE: Internet Explorer v8.00 (8.00.7600.16385)
Boot mode: Safe mode with network support

Running processes:
C:\Users\Jed Dolbeer\AppData\Roaming\dwm.exe
C:\Program Files (x86)\LogMeIn Hamachi\hamachi-2-ui.exe
C:\Users\Jed Dolbeer\AppData\Roaming\Microsoft\conhost.exe
C:\Windows\SysWOW64\ctfmon.exe
C:\Users\JEDDOL~1\AppData\Local\Temp\csrss.exe
C:\Program Files (x86)\Mozilla Firefox\firefox.exe
C:\Users\Jed Dolbeer\Downloads\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.bigseekpro.com/splitcam/{5D8AEFDA-9AD7-4194-A480-56E82C862489}
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.bigseekpro.com/splitcam/{5D8AEFDA-9AD7-4194-A480-56E82C862489}
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant =
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch =
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page = C:\Windows\SysWOW64\blank.htm
R1 - HKC... Read more

3 more replies
Answer Match 54.6%

Whenever i startup my computer and i see the black windows screen and you can see it loading, after 10 seconds this BLUE screen comes up. I didn't install any new hardware. I have those 6 boot disks, but it says the second disk has a problem...this is the message, File \ntkrnlmp.exe could not be loaded. The error code is 7. Setup cannot continue. Press any key to exit.
The blue screen says.

A Problem has been detected and windows has been shutdown to prevent damage to your computer
UNMOUNTABLE_BOOT_VOLUME

IF this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

***

***STOP;0x000000ED(0x82AF1E30,0xC0000006,0x00000000,0x00000000

btw, im using a public computer

A:BLUE screen, can't even startup

Quote:




0x000000ED: UNMOUNTABLE_BOOT_VOLUME

The kernel mode I/O subsystem attempted to mount the boot volume and it failed. This error also might occur during an upgrade to Win XP on systems that use higher throughput ATA disks or controllers with incorrect cabling. In some cases, your system might appear to work normally after you restart.




http://aumha.org/win5/kbestop.php

This is almost always a problem with the hard drive ; either incorrect , loose or damaged cabling, or controllers or that you have the drive settings incorrect in the bios.

2 more replies
Answer Match 54.6%

Hello and thank you for taking the time to read about the situation. First, I'll start with the things I tried before the event happened. First off I noticed my computer getting slower and slower, as well as a malware that started running antimalware doctor or something like that (forgot the name) in the background, so I tried a malwarebytes scan and a spybot scan to fix it. Afterwards, the computer started running better, but the sound driver was uninstalled for some reason. Afterwards, I noticed that anything that i clicked on google or yahoo, it would autodirect to a weird random website. I searched up the problem, and found out that Hitman Pro cleans up the viruses efficently that caused the problem. I ran the program, thought it was good, and restarted the computer to see the effects. Right after that, blue screen would pop up after everything started up, and the computer would restart. It wasn't as soon as I heard the windows music, but it was right after all my programs loaded up on the bottom right. I tried restarting it, but I couldn't make it work. So i opened up safe mode with networking and it works fine, but I still have that redirect bug. I searched up the blue screen after malware removal and came accross this website, so I thought this may work. I hope you guys can fix it!
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:37:52 PM, on 5/28/2011
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
... Read more

A:Blue Screen After Startup

13 more replies
Answer Match 54.6%

I get this problem during bootup.

DRIVER_IRQL_NOT_LESS_OR_EQUAL

STOP: 0X000000D1 (0X00005278, 0X00000009, 0X00000001, 0XE1DCC39E)

CAN ANYONE BE OF ASSISTANCE?

A:Blue screen at startup

There is more to the BSOD message that would include which driver is the one that needs to be updated, but you didn't include it. Try this: Stop error message on a Windows XP-based computer: "STOP 0x000000D1"
Also, run this program, BSOD_XP_v1.3_jcgriff2_PROD.exe.when it is done go to My Documents and zip up the file TSF_XP_SUPPORT and attach it in your next post, this will tell us more about your system.

4 more replies
Answer Match 54.6%

Hey everyone.

When I startup my computer and it starts loading Windows XP, suddenly it flashes to a Blue Screen with the following message:

STOP: c0000221 {Bad Image Checksum}
The image urlmon.dll is possibly corrupt. The header checksum does not match the computed checksum.

I thought about reinstalling the operating system, but I don't want to lose all my files. Any thoughts on what I should do?

-Joe

P.S. As always, happy to make a nice donation for help.

A:Blue Screen at Startup

Hi Joe !

That message means a system file is corrupt. The problem is that Windows file protection should prevent unwanted changed to system files, meaning that there's a good chance that you have some hardware problem and that the urlmon.dll file is not the only one corrupt.

Had you installed any new program or update right before the first crash ? Anything unusual happened : crash, power failure, ... ?

What version of Windows XP and what service pack are you using ?

What version of internet explorer ?

What's the brand and model of your computer ? Do you have the XP install CD and if so what service pack is on that CD ? If this is a preinstalled version of Windows and you only have a recovery disk then tell us about it.

Repeatedly press F8 while the computer starts and see if you can boot using the last known good configuration. If that didn't work then see if you can boot in safe mode or safe mode with command prompt.

Once in Windows go to start => run and type chkdsk c: /R. You'll be prompted to restart the computer and your drive will be checked for errors. Tell us about the scan's results and retry to start the computer normally.

If you can't start Windows in either of those modes then grab a retail XP CD to access the recovery console and scan the hard drive for errors (if needed you can borrow a retail XP CD for this purpose but keep in mind that you won't be able to use a retail XP CD to reinstall on an OEM system). Enter the BIOS at startup... Read more

1 more replies
Answer Match 54.6%

when i start my computer i get a blue screen with a code / coooo21a fatal system error windows log on system/unexplained with status 0x000005/system has been shut down.i have tried starting in safe mode,reboot,and i get the same results the computer sames to be locked down. it started this after scan with anti spyware and did a reboot.been dealing with this for over a week still no luck hope someone can help tried reinstalling windows from my start up disk but my computer won't reconize the cd it only reconizes a floppy disk

A:get a blue screen on startup

Hello and to the BC forums.

Please sit tight and be patient.

I have requested that an experienced helper who specialises in malware-related un-bootable computers respond to your topic.

Thank you.

29 more replies
Answer Match 54.6%

I'm currently on my laptop right now. And the problem is occurring on my desktop. It shows a blue screen with HP invent in the middle and at the bottom in white letters it says: V3.07 Esc= Boot Menu F1= Setup F10= System Recovery.

It worked the day before, and for some reason whenever I turn my PC off it makes me do it twice. I press start and then Turn Off, and then I have to do it again, if that matters? Can somebody help me please?

Whenever I press the buttons it shows nothing happens. I thought maybe the keyboard was broke, but when I turn on the PC the yellow lights on num lock, caps lock, and scroll lock all blink on real quick and then go off, but whenever I try to press num lock or caps lock the yellow light doesn't come on while the PC is on.

A:Blue Screen on startup?

The screen your getting stuck at is the bios splash screen. (So it's not a blue screen..?) Your MBR/NTFS journal may be corrupt. Can you boot off a CD? Did you try hitting F10 for System Recovery?

2 more replies
Answer Match 54.6%

First, background on the laptop in question.

I am using a Toshiba tablet laptop of the Tecra M-7, running Windows XP Tablet Edition, possibly Home, but I cannot be certain. This came on the computer, so I do not have a disc, and was told by Customer Service and Tech Support when I got the laptop two years ago that it would not be needed (as all the files are on the computer in the factory settings and I can apparently boot from them, so they said). The computer recently had a virus that we couldn't beat, so it was returned to factory settings in August of this year, It was brought back up to date completely, I made sure the BIOS and Service Packs were downloaded right, and preformed bi-weekly update checks and scanning.

The problem.

About four hours ago I shut the computer down. No errors screens, no manual button pressing. It turned off without a hitch and I left it alone for an hour and a half to about two hours. When I opened it back up and turned it on, it showed the Start-Up screen and after a short time for the loading bar, froze, flickered blue, and restarted. I have tried starting it in safe mode (all three types), the last settings that worked, and normally. All options yield the same results. The last time something similar happened, it was an issue with the BIOS not having been updated for three big upgrades, and while that could be the case, I doubt it, because I've been diligent in making sure everything's up to speed.

No errors, no war... Read more

More replies
Answer Match 54.6%

The electric went off while my computer was on and when I turned it back on it went to a blue screen and every time I turn it back on its goes back to the blue screen. The blue screen says: A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps; Disable or uninstall any anti-virus, defragmentation or backup utilities. Check your hard drive configuration and check for any updated drivers. Run CHKDSK/F to check for hard drive corruption and then restart computer. Technical info: Stop: 0x00000024(0x00190203,0xb2f90880,0xc0000102,0x00000000). Any help will be appreciated. it has windows xp on it.
Thank You,
cardinal0008

A:blue screen at startup

Hello,

Do you have the Windows XP re-install disc? If so you can get to the Recovery Console and hopefully run a chkdsk /r to repair.

Unmountable Boot Volume

4 more replies
Answer Match 54.6%

windows is driving me nuts

any and all help would be appreciated here...

This all started yesterday when I somehow managed to get a trojan on my computer. I went through various ways of trying to take it off and finally decided to restart in safe mode and try to fix the damage from there. I selected /SAFEBOOT in msconfig and restarted. Now the computer boots to a blue screen displaying the IRQL_NOT_LESS_OR_EQUAL error code, along with STOP: 0x0000000A (0xF79A2354, 0x000000FF, 0x00000001, 0x804E2E41). All signs point to this being a software problem as my hardware has not changd recently. No matter what I select (safe mode, last known good config, start normally), I get the same blue screen. The only things I can access are BIOS and recovery console (with boot CD). I'm fairly computer literate but at this point I am completely stumped... help please!?
 

A:Blue screen on startup

also, I have another computer that I can put the hard drive into and all the files are still accessible in that way, so if there is some way to fix it through that method, it is an option...
 

3 more replies
Answer Match 54.6%

Hey guys, I've been trying to play some half-life mods, day of defeat source, and tactical intervention. But for some reason I keep getting a blue screen with this as the technical information. 0x000000D1 (0xBA74E000, 0x0000002, 0x00000000, 0xA76C8473) Can anyone help me?

A:Blue screen at startup

What are your PC specs?

RAM
CPU
Motherboard
Graphics Card
PSU

I need the mini dump so I can see what driver is causing the issue.


To enable mini-dumps in Windows 2000/XP/2003 do the following:
Right click on My Computer, choose Properties and go to the Advanced tab;
Click Settings in the Startup and Recovery box;
Choose Small memory dump in Write debugging information;
Close all the dialog windows by clicking OK buttons;
Reproduce the system crash;
The small dump file will be created in the directory chosen in the Small dump directory box.

Do that before you try to start up the game, and if you could could you tell me the driver. It'll be something like isatr.sys in the BSOD right near the numbers (ox00000d1 )

3 more replies
Answer Match 54.6%

I just got this brand new dell laptop, installed with vista home basic (ya not the best out there i know). It was working fine for the first week or 2, then after that i got an error. The BSoD. The very odd thing about this is that it does not happen too often, and only happens on ONE occasion. and thats in the log-in menu of the computer. I go to restart my computer, and everything boots up fine. BIOS, WIndows Vista, etc. Then it starts up the log-in screen, and for some reason, when i dont log in my user-name in a certain amount of time, the blue screen comes up and restarts my computer. Its very wierd. However, if i am able to log in quickly enough, everything boots up fine and the computer doesnt show any signs of problems. In short, this BSoD only occurs when i dont log-in my username, and just leave it in that uersname log-in menu for a certain amount of time.
I set the settings now so that whenever the BSoD comes up, it doesnt re-boot my laptop so i can take note of the information on it, and heres what it is:
STOP: OXOOOOOO8E (OxCOOOOOO5, Ox821E8760, Ox9827BCD8, OxOOOOOOOO)

i also went into problem reports and solutions and here is what they gave me:
Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.768.2
Locale ID: 1033

Files that help describe the problem (some files may no longer be available)
Mini101207-04.dmp
sysdata.xml
Version.txt

Extra information about the problem
BCCode: 1000008e
BCP1: C0000005
BCP2: 821E8760
BCP3: 9827BCD8
BCP... Read more

A:Blue Screen on Startup

6 more replies
Answer Match 54.6%

HI i have just switched hard drives with 2 comptuers a pentium4 and amd athlon 64 3100 and i tired the instrucions in this post http://www.techspot.com/vb/topic8356.html
and got the pentium working i have tried it on the athlon64 and it loaded all the things from the cd and did all the fancy stufff at the beginning untill it had to restart. it then restarted and would have no problems starting up untill the windows screen whould show up with the loading bar. the little curser would go accross 5-7 times then blue screen would flash and it would restart. I really dont watn to format i hope there is some way of fixing this.
 

A:Blue screen on startup

i have fixed this problem. instead of repairing i installed on the same patron and didnt format and told it to replace the windows thing. to me it seemed to be the closest thing i could do to keeping my files. its installing the windows raight now i'm shure glad i got it working.Case Closed
 

1 more replies
Answer Match 54.6%

Blue screen during startup ... A problem has been detected and windows has been shut down ... DRIVER_IRQL_NOT_LESS_OR_EQUAL ... PRISMUSB.SYSMy wife's Dell Dimension 2400 desktop goes to a blue screen, either during the BIOS load or after generating the Windows XP desktop. If we shut it down and start again, in one to three tries, it will eventually boot up all the way and perform normally.The blue screen references a variable, DRIVER_IRQL_NOT_LESS_OR_EQUAL. It also references the driver file PRISMUSB.SYS, which is the driver to the D-Link USB wireless device installed on the computer. Contrary to the blue screen messaging, we can't think of anything that has been installed recently on the computer.After reading various posts on bleepingcomputer, I downloaded blue screen viewer. Here's the output:==================================================Dump File : Mini082610-02.dmpCrash Time : 8/26/2010 6:51:36 AMBug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUALBug Check Code : 0x100000d1Parameter 1 : 0x2cacb13cParameter 2 : 0x00000002Parameter 3 : 0x00000001Parameter 4 : 0xb0ceace9Caused By Driver : PRISMUSB.sysCaused By Address : PRISMUSB.sys+cce9File Description : PRISM Wireless NDIS 5.1 USB DriverProduct Name : PRISM Wireless LANCompany : Intersil Americas Inc.File Version : 3.00.04Processor : 32-bitComputer Name : Full Path : C:\WINDOWS\Minidump\Mini082610-02.dmpProcess... Read more

A:Blue screen during startup ...

Simple test.

Uninstall the device referenced, using Device Manager.

Reboot.

Do you still get the error? Did the device automatically reinstall?

Louis

9 more replies
Answer Match 54.6%

I have a Dell Inspiron 8600 running Windows XP Home edition with Service Pack 3 that we have been using on our wireless network without a problem until recently. We are using a Linksys wireless router, model wrt54gs v7.

There are 2 computers using the router one works fine, the other started getting a blue screen each time an attempt is made to boot the computer about a month agao ...this is the Dell. While on a trip recently we took the computer with us and we were able to connect to other wireless networks so we thought the problem had been solved.

When we returned home I attempted to start up the computer and got the blue screen again. It appeared that it would fail when an attempt was made to start the wireless connection so I took the computer to a local coffee shop and again attempted to start windows. It started just fine and was able to utilize the wireless network there.

While I could, I disabled the wireless network and upon returning home again attempted to start the computer up. Now it will boot up with no problem but I cannot connect to the wireless network (it blue screens)

Is there a way I can delete the original setup for our wireless network so I can set it up again or is there something else I can do to correct this?

Thanks.
 

A:Blue Screen on Startup

are you connecting using windows zero config or dells connection tool. To delete the connection is easy you just have to go into whatever tool your using and look for stored connections highlight it and hit the delete key. I'm not familiar with the dell tool so I can't help with it much but if you get in it and go to all the screens you will find the saved connections just highlight your home connection and delete it. If its window Zero config right click on the wireless icon in the tray and go to manage wireless networks. Or its on the screen where you connect on the left hand side it says manage wireless networks or something close to that. I'm on vista and trying to remember where it is on XPs wireless config.

Sorry I couldn't be more specific but I saw no one else had responded and thought I would try to at least steer you in the direction you need to look.
 

1 more replies
Answer Match 54.6%

Specs:

Windows 7 Ultimate x64
Intel Xeon E5645 (2 processors)
Memory: 12 GB
Motherboard: EVGA 270-WS-W555-A2 Classified SR-2 Dual LGA1366 Xeon/Intel
Hard Drive: Western Digital 128 GB SiliconEdge Blue SATA Solid State Drive SSC-D0128SC-2100
Graphic card: Nvidia Quadro 2000

I have been experiencing frequent BSOD for a while. After reading through many threads, I have done a system repair, updated my graphic card's driver, and I have done a memory diagnostic with memtes on my ram (each with 2 passes). Before I did all those, I used to get BSOD whenever I watched youtube. Now, I always get BSOD once when I turn on my computer.

Please Help!!!!

Thanks!!!

A:Blue Screen After Startup

It's pointing to memory corruption. Did you remove any of the sticks during testing? If so make sure that all sticks are seated firmly back into the slots and at least run the test for memory for 7 passes or overnight, you have a lot of ram that takes a pretty good test and two hours wouldn't give you a complete run of the blocks. Memtest86 guide: RAM - Test with Memtest86+

After you run the Memtest report back and let us know the results also I would update to sp1: windows6.1-KB976932-X64.exe 903.0 MB Download Details - Microsoft Download Center - Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932) your system drivers are almost 3 years old anf fill in the rest of your system specs in your profile using the attached program it will give better and more complete info on your system. BTW it sounds like a nice computer.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\Downloads\jesschaco\Windows_NT6_BSOD_jcgriff2\092211-22093-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (24 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`03249000 PsLoadedModuleList = 0xfffff800`... Read more

2 more replies
Answer Match 54.6%

hey guys everytime i turn the computer on after it loads the desktop in about 2 minutes it crashes into a blue screen and then i have to restart it and after that it works fine...
i uploaded some pics of the screen (sorry for the bad quality its taken from my phone)

A:Blue screen at startup

The Timing of it happening 2min after desktop makes me think that this could be software still loading that may not be compatable.

I would boot into safe mode, and if you are good and no BSOD, Open "MSCONFIG" and disable all your startup programs, reboot, if all is well, Enable them one by one and be very picky about it to try and ID the program.

1 more replies
Answer Match 54.6%

On startup both in safe mode and normal I get the following blue screen error code 0X0000007B (0XBA4C7524, 0X0000034 0X0000000 0X0000000 ) I tried creating a boot disc as described in this post http://www.bleepingcomputer.com/forums/topic355565.html/page__view__findpost__p__1987066 and it still blue screens after booting from cd any input would be greatly appreciated thanks David

A:Blue Screen On Startup

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Please refrain from running tools or applying updates other than those we suggest while we are cleaning up your computer. The reason for this is so we know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process. Please also continue to work with me until I give you the all clear. Even if your computer appears to act better, you may still be infected.Even if you have already provided information about your PC, we need a new log to see what has changed since you originally posted your problem.Once we start working together, please reply back within 3 days or this thread may be closed so we can help others who are waiting.Normally, I'd ask for logs at this point, ... Read more

2 more replies