Tech Problem Aggregator

Geforce 7300 LE - Blue screen of death - Multiple lines down screen.

Q: Geforce 7300 LE - Blue screen of death - Multiple lines down screen.

Today I booted my computer up to be promoted with a black screen, I gave it a good half an hour before forcing it to shutdown, to which when I booted it back up. Was then promoted with a blue screen about the video card not being able to lead, that happened twice.

I then booted it into safe mode, fiddled around with the drivers to see what was going on, after restarting it again, I got the same black screen, this kept on happening. I then concluded my best solution was to install XP, this worked the video card runs. So the card is not dead, but there are multiple blue lines going down the screen in 4 columns. After going into the device manager I saw that it claimed it was not installed, then I went to Google and downloaded the driver, after installing the computers goes to the same black screen that I got on windows 7.

I have no clue what the problem is, so any help would be most appreciated. Also I tried installing Linux, but after getting though then loading screen of the installer, it goes to the black screen. At the moment in am on my tablet so sorry if there are so many mistakes. I'll try and get some photos of how it looks.

PC Specs:

- Dell Dimension E520
- Intel pentium D
- 2gb Ram
- Nvidia Geforce 7300 LE

Photos:
N/A





Thank you, any help will be hugely appreciated.

Sean Hall.

A: Geforce 7300 LE - Blue screen of death - Multiple lines down screen.

Hi Sean,

I don't like to say it, but it sounds like the graphics card is dead. I had the same issue on an old 8800gts, it would work until I installed the drivers, then I would get very bad artifacts/lines down the screen.
I tried it on 2 different PC's with the same end result once the drivers were installed.

Paul.

5 more replies
Answer Match 101.64%

Whenever I turn on my computer with Windows 8 installed, I always get this Blue Screen. However, what's curious is that it doesn't display any message at all! It just displays random horizontal lines on my screen. Whatever key I press on my keyboard and no matter how many times and wherever I click with my mouse, not a single thing happens. So, I have no other choice but to hold the power button on my CPU manually to turn the computer off and on again. The same thing happens when I do that: I get the Blue Screen again after resetting. I try to turn the computer off and on again by using the same method to do so, and only then will the computer eventually launch Automatic Repair, therefore forcing me to boot into safe mode with networking instead.

It has been this way for several weeks now, and I am beginning to use my computer in safe mode on a regular basis. I know that I shouldn't do this since safe mode is mainly used to fix the computer; however, I have tried running all my antivirus software and spyware removal tools, to no avail. There aren't any viruses on my computer, and every single driver is up to date. I am also starting to lose hope since I can't even open some of the programs that I need the most such as Microsoft Office and other programs that I need for my schoolwork. Furthermore, since I am in safe mode, my printer was also uninstalled, thereby rendering it useless and forcing me to ask other people to print my schoolwork for me.

I ... Read more

A:Blue Screen of Death Without Any Message, Just Random Horizontal Lines

If you can use the pc normally in safe mode, I think it's a software issue. Maybe your windows got corrupted.
When did this start? did you install anything or change anything in your computer's configuration? try using MBAM. If you could boot windows normally, I'd ask you to post a hijackthis log.
Does the bsod appear after the windows loading screen or before or while it's loading?
 

4 more replies
Answer Match 100.38%

I just replaced my Geforce 6600 256M with a Geforce 9800 512M, both manufactured by XFX. Prior to the upgrade everything worked fine and running the latest drivers. I replaced the card and kept the driver, assuming it would function properly. After installation everything seemed ok until I tried to run a CD, that's when everything slowed down and the drive ran without apparently reading any data, or at least it didn't do anything. When I tried to install Fallout 3 the system crashed to the infamous Blue screen of Death.

I uninstalled and reinstalled the drivers three times now, to include shutting off AV and ensuring all fragments of the previous drivers were removed (used Driver Sweper and CCleaner). When I put in Fallout 3 the drive spins up and then the screen flashes blue with some text on it and the system reboots. I cant read the text before it reboots but I think I seen something about VGA, maybe. MS installed some update after the last driver reinstall and needed to restart, but instead I tried to install my game again and it tried to run instead of crashing but of course couldn't complete installation - but it proved that the problem wasn't the hardware specifically.... Since rebooting I tried to install again but it just blue screens, no idea why the hanging update would allow the drive to run and not any other time. Also, it plays audio and video just fine, just not data....

The problem only occurs when I try to run something from the CDR... Read more

A:Geforce 9800 GT - Blue Screen of Death

Your power supply may be too weak to support the new video card and everything else
 

8 more replies
Answer Match 99.54%

This has been going on with me for about a year now. I've narrowed the BSoD down to the vid card's driver file. I've used nearly every driver Nvidia has released to include the newest beta version to try and remedy the random BSoD issue. It happens only in games, and then, only in a select few. In those few games, the BSoD cooks off basically every 10-12 minutes or when the game is left idle for a couple minutes. To follow is the error report.

Any help would be peachy.


Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 5/13/2007
Time: 1:47:28 AM
User: N/A
Computer: PrettyHateMachine
Description:
Error code 1000008e, parameter1 c0000005, parameter2 bfaf0cc9, parameter3 b05e0aa8, parameter4 00000000.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 38 1000008
0020: 65 20 20 50 61 72 61 6d e Param
0028: 65 74 65 72 73 20 63 30 eters c0
0030: 30 30 30 30 30 35 2c 20 000005,
0038: 62 66 61 66 30 63 63 39 bfaf0cc9
0040: 2c 20 62 30 35 65 30 61 , b05e0a
0048: 61 38 2c 20 30 30 30 30 a8, 0000
0050: 30 30 30 30 0000
 

A:GeForce 6800GT: Blue Screen of Death ( 1000008 )

Update:

Just got off the phone with a helpful guy at BFGtech Tech support. We got on Everest (handy little Mobo/Chip/GPU all-in-one temperature monitor) and did some load testing. According to them, the GPU I had (the 6800GT OC made by BFG -Tech) should only be showing a temp about 10-15 degrees above the ambient temperature in a room-temperature enviornment when the system is idle. My GPU was sitting on 62 degrees C at an ambient temp of 46 degrees C.

They said this in and of itself didn't look good, but we still put it through some load testing. We used Command and Conquer 3 since it was what I had in the drive. Only 5 minutes into the game, the GPU temp went from 62C to 79. Once it passed 80 at the 6 minute mark, it shot to over 120 before the 6min30sec mark. At around 130 the system locked up, and gave me the above error.

With a little more testing, we found that the GPU's cooling fans are not operating properly. Also, since this has been going on for a while, the excessive heat has also shorted out one of the RAMDACs. Longer story short, BFG is sending me a new card.

Gotta love lifetime warranties.
 

3 more replies
Answer Match 94.5%

Hi,

I've been getting Blue Screen of Death crashes for weeks now. Bought driver software and upgraded some drivers ;but errors still occur. Not sure of what to do next.

Dunno if there is a way to upload the BSOD mini-dumps; but ideally someone could make sense of them.. and help me solve my problem. If, in the process, i learned how to read the min-dumps myself, I could help the next person who has a similar problem.

Thank you,

Steve
 

More replies
Answer Match 93.24%

I have never seen a screen like this in the 20 years I've had my own computer.

I had Windows 8 on a secondary drive as a dual boot with Windows 7 temporarily as I migrated to Windows 8. I somehow messed up either the boot loader or somehow corrupted the Win8 install for which I'll skip the details for now. But it was just as I was starting to decommission my Win7 install (I removed one drive from the 2-drive mirror running Win7 but figuring the single disk left would still run in a 'degraded' status. It ended up messing something up.).

I've been running bootrec /fixmbr, fixboot, scanos, and rebuildBCD from my Win8 USB stick and it says it completed but no luck on booting. I get either 0xc0000001 or 0xc000021a errors. Auto repair can't fix it.

I tried running this command, "bcdboot c:\windows /s c:", and got the screen shown in the attachment. White vertical lines on an orange background.

The only drives connected is the Win8 SSD sata drive and a DVD drive on IDE. I disconnected the DVD drive and the Win8 flash screen would appear with the circular dots but would freeze right there.

I don't have logs or screenshots to show but the single partition on the SSD is marked as active via diskpart (no system reserve partition), bcdedit shows c:\windows as the default location of the OS, diskpart shows the partition as c:, but the DVD drive is disk0, and the SSD is disk 1. Would that be a problem?

It is like it can't find the winload.exe file but I verified it exists... Read more

A:'White Vertical Lines on Orange Screen' Screen of Death

Have you tried putting the removed drive back in?

It looks like a video card problem (hardware) to me - but it shouldn't be that because you're able to use the USB Startup Repair functions (am I right in this assumption?). That means (to me) that it's likely to be a video driver problem (?).

Can you attempt to boot into Safe Mode? If so, what happens?
Does the screen problem show up after POST is completed? If so, at what point does it show up?

2 more replies
Answer Match 89.46%

I will start explaining my most urgent problem, then move on to the saga of my RAM. Before I begin though, some information about my PC. I am running MS Vista Basic edition, with service pack 1 & 2 installed. I have a ASUS Maximus Extreme motherboard, and I currently have 2 RAM types installed (more on the why of that later).

One set of memory: G.SKILL Trident 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 2000 (PC3 16000) Triple Channel Kit Desktop Memory

The fourth stick of memory is: Crucial Ballistix 1GB (1 x 1GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model

I'll explain the why of 2 different memory types now. I have 2 sticks of the crucial memory. My system was constantly overheating for a while (I would get forced resets and a Over Temperature error on boot up). This most likely damaged the memory. So I bought some fans and new RAM, the G.SKILL Trident stuff. Only when I try to start my computer with that RAM, it seems to start but I won't get anything from the monitor. There are no beeps from the computer though, it seems to start normally. But when I have 1 stick of the Crucial memory and the 3 Trident sticks in, it starts just fine.

On to my most urgent problem. When I install the RAM, all of the memory detects. At some point (I don't know when) it will drop down to detecting 3 gigs instead of 7. If I move around the Crucial memory, it will all detect again for a while, then go back to 7 gigs. As I am an avid gamer, 3 ... Read more

A:Multiple RAM issues, detects then doesn't detect, Blue screen death errors, soft lock

Is there something I could improve in my post to increase the number of helpful responses?
 

1 more replies
Answer Match 88.62%

HI guys
 
When booting up my laptop in "last known good configuration" mode i keep getting the blue screen of death and the laptop freezes and cuts out and is very over heated. When i have booted up in "safe mode with networking" the latop is still over heating but it dosn't freeze or i don't get the blue screen of death. I am also limited to what i can doin safe mode.
 
Any ideas what the problem could be please chaps?
 
Thanks in advance
 
Tony

A:Blue screen of death on normal boot up but no blue screen in safe mode ?

Exact wording of BSOD error message?
 
System manufacturer and model?
 
Conditions/events which may have led to this?
 
When did problem begin?
 
Louis

14 more replies
Answer Match 88.2%

In need of serious help.*
To begin, I am stupid and haven't backed up any of my files so for now a windows reinstall is out of the question. (unless it's completely necessary) okay, so the problem: I was using my computer as normal. Then while on Google Chrome, it started getting slow and said "not responding" this happens all the time, to everyone so I waited and then the dreaded Blue screen of death appeared. Didn't get a look at what it said because it shut down almost immediately. After that it loaded as normal? Which is weird, I think. But got stuck after startup on the black screen of death. All I have is a cursor. Can't do ctrl+alt+del, can't load any of the safe modes. When I go on startup repair, it says "no restore points" on system restore and "could not detect a problem" on system repair or whatever it's called. There must be something to fix this?! :/ I live in hope that the whole system doesn't need to be wiped clean because as I said, I stupidly haven"t backed up my files.*

Can anyone help?? Please?

A:Stuck on black screen of death, after blue screen of death

this sounds like it should be a BSOD thread, post a seperate thread in the BSOD section following the posting instructions for BSODs, make sure you include the dump files, if you don't know how to do that, it should tell you in the BSOD posting instructions.

9 more replies
Answer Match 86.94%

Windows XP Media Center Edition Service Pack 3

Hi, this post is regarding my sisters computer.

She started having problems a couple of months ago involving the PC not booting up unless it was in safe mode. When she switched the power on, windows would try to load but she would soon be faced with a STOP 0X0000007 blue screen error message. She spoke to dell support and they managed to single out the Nvidia 7300 graphics card as causing the problem. She disabled it from device manager whilst in safe mode and the computer now boots up. However this caused scrolling to be really quite sluggish. The page takes ages to respond and complete one scroll. Further evidence of the blue screen being caused by the graphics card occured when i re-enabled the graphics card.

I have tried updating drivers and re-enabling the card, but to no avail. I have run scans using, spybot search and destroy, malware bytes, and avast anti virus. All complete with no traces of viruses or spyware.

How can I fix this?

Thank you for any insight you can give me to this problem.
 

A:Solved: Nvidia 7300 causing BLUE SCREEN 0x0000007 error.

try removing the card and using the motherboard vga socket instead, if all ok then its the card which is poorly

http://www.youtube.com/watch?v=R9nIVW5W3K4
 

3 more replies
Answer Match 86.52%

hi, just put in a 6600gt and everything, drivers, etc installed fine. however, once i ran a game, dotted vertical lines appeared down my screen and remainded for the duration of gameplay. the screen is fine once i am back in windows. does anyone know what could be causing this problem? i tried reinstalling drivers. please let me know, thanks

-Jake
 

A:geforce 6600gt screen lines

Does it do it in all games or only in one? It could be a game issue(check for a patch), if it's only one game, or it could be a defective/overheating gpu if it's in all games.
 

6 more replies
Answer Match 85.68%

I have been trying to fix this for a good 4 hours now, it occurred suddenly, my computer force restarted and I got these white lines only when I got into the log in screen, the loading windows screen did not have these lines, there around about 8 of them across my monitor, I ignored them at first and tried to log in, but when I log in a blue screen with no text comes up, and so I restarted my computer and entered safe mode with networking, it loaded fine, with no horizontal lines.
However when loading it did pause on a driver for a while, AswRvrt.sys ,though it said it loaded and safe mode with networking did start.

So to try and get a normal boot to work I tried a system repair, this didn't fix it, I also tried a system restore, again this didn't fix it either, the lines still appear on a normal boot, I have no idea what's causing it.
 

More replies
Answer Match 84.84%

Hi, thanks for checking my question. I haven't found an answer to my particular situation:

Dell xps m1430 laptop w/vista (32).

It all started with a blue screen w/scrolling text after the fated restart. The blue screen text said "if this is the first time you've seen this message..." and then comp restarted, again showing the blue screen, then restarted into windows repair mode, after repair mode tried to fix the problem comp restarted, then the screen went black / blank right after the little windows loading animation (where the bar keeps moving from left to right and there's a small windows logo).
It all happened fast, so there may have been steps I forgot, but that's the jist of it.

Now screen always goes black / blank during startup after the windows loading animation, so I can't start windows in normal mode.
I can start in safe mode if I manually force shutdown by holding the power button, so I'm not imploding with fear... ok I am.

Possible causes:
1. This occured right after installing 11 vista updates (that restart was when I saw the blue screen)

2. Also occured the restart after running a patch called "Vista TCP/IP and UAC AutoPatch 6.0" I downloaded it from softpedia, the developer was listed as defcon, and their website listed was securevista.net, but the site is down(I found this out after the problem occured). The patch had lots of positive reviews, and lots of people on other sites also suggest using it to re... Read more

A:Solved: Black screen of death at startup, all began with a blue screen

7 more replies
Answer Match 84.84%

Hello.

Just today, I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : \windows\system32\config\system."

You can attempt to repair this file by putting the winxp cd in etc...

Now when i turn on my computer there is just a black screen showing, with nothing at all on it.

Any ideas anyone?

Thanks very much for your help.
 

A:Blue screen of death, boot problems, black screen startup

It's a nasty error that requires some persistance and resourcefullness to overcome without a clean install.

If you have a Windows CD or have the recovery console installed, you might want to have a go at these directions.

http://support.microsoft.com/default.aspx?scid=kb;EN-US;307545

Forum example of a successful recovery here:

http://forums.techguy.org/showthread.php?s=&threadid=195985
 

3 more replies
Answer Match 84.42%

Hello everyone.

I have a Toshiba Satellite L450D-13X computer for the kids, and for the price it's a good laptop. Have had no issues with it until two weeks ago when the screen froze for the boys whilst playing a game and downloading a program from the net. Had to do a force shutdown and since then we have a BSoD on every boot-up. This is what we have tried:

On 'Starting Windows' we are given an option of either 'Launch Startup Repair' which ends up as BSoD or 'Start Windows Normally' which reverts back to the 'Starting Windows' option list.
Any attempt to enter 'Safe Mode' results in BSoD.
Attempting to boot an ISO of the Windows Recovery Disk on a USB key (we did highlight it and promote it to the top) results in BSoD. Borrowing a proper Window 7 installation DVD and highlighting this as an option results in BSoD.

In fact, the only option we used that threw up something different was using advanced boot options. On one of these options we got the Blue Screen of Death with the following information:

Unmountable_Boot_Volume
Disable Bios Memory Options such as caching/shadowing

Tech info

Stop: 0x000000ED (0xFFFFFA80023C2CDO 0xFFFFFFFFC0000185 0x0000000000000000 0x0000000000000000)

I don't mind erasing the hard drive and starting again, there's nothing on it that's critical. I'd very, very much appreciate a steer on this. Checked the web for stuff and nothing seems to assist in any other options. I am not particularly tech literate but can follow instructions.

Thanks in... Read more

A:Black Screen of Death/Blue Screen of Death

Hi, malbekh; and welcome to the forum. Please read these threads and post back. We will be glad to help you.

[1 - Novice] How to ask for help with a BSOD problem

http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html

2 more replies
Answer Match 84.42%

Hello
Before i describe the problem i would like to make it clear that i would like to recover as much as possible. This problem occurred playing a game called Empires V2.1. It is a steam half 2-death match mod. I had problems in the past however i didn't not consider them problems the screen froze when the game changed map. However when it froze it wouldn't respond to Ctrl+Alt+Delete or Ctrl+Esc or the start menu button. I pressed the power button and restarted it that way. However this is when the problem occurs and i can't over come it. It starts with a normal dell screen and the loading bar crosses at the bottom as normal. Then it goes to a black page with a blue line across the top with white writing saying www.dell.com. A line (programming maybe it appears and disappears rapidly). It then goes to a black screen saying something along the lines of We are sorry for the inconvenience but windows failed to start properly. It then gives you options and no matter which option I choose I still get a blue of screen of death saying the following;

A problem has been detected and windows has been shut down to prevent damage to you computer. If this is the time you've seen this Stop error screen, restart your computer. If this appears again, follow these steps;

Disable or uninstall any antivirus, dick defragmentation or backup utilities. Check your hard drive configuration, and check for any update drivers. Run CHKDSK /F to check for hard drive corruption, and the... Read more

A:Blue Screen Of Death. Fails To Start. All Before Login Screen

Can you boot into Safe Mode? If so, try running chkdsk from Safe Mode.How to start Windows in Safe Mode

4 more replies
Answer Match 83.58%

I've having an issue that I think some ppl had, windows 8 crashing going to blue screen of death or blank black screen and then it restarts by itself, also I have noticed that it says repairing disk in D:/

I have one SSD 120gb in the C:/ which it host the operating system and some minnor programs, in a HDD which is my D:/ drive there I have my games.

ASRock 990FX Extreme 9
AMD FX 8350
Kingston Hyper X 120GB SSD
WD black 500GB HDGB HDD
Corsair Vengeance 8gb Ram 2133Hz
Windows 8

Thanks for the time, if more info is needed I willl gather it and post it

A:How do I fix windows blue screen of death and black screen

Update, seems that some tweaking did fix the problem, go to search and type power, in the left click on the one that says change what power buttons do, then uncheck the box that it says turn on fast startup (recomended) then save changes and a restart and youre done -at least for me it worked-

19 more replies
Answer Match 83.58%

Hello

I have a computer running Windows 7. Last night the computer was running fine. This morning when I turn it on, i get a black screen. To fix the problem I conducted a system restore. After it finished restoring, the computer restarts and everything worked fine. To make sure if everything was in working order, I restart it again. After the "Starting Windows" screens comes up, I get the Blue Screen of Death. I can't even read what the error says because the computer just restarts itself. I did not connect anything new to the computer. I performed a hardware diagnostics to see if it was a hardware failure but no error was found. I can't even get into safe mode. The SFC.exe will be my next step.

A:Windows 7 Black Screen then Blue Screen of Death

The SFC.exe did not work either.

4 more replies
Answer Match 83.58%

I am running windows 7 Ultimate 32 bit and facing with a big problem,I suppose.
-Black screen sometimes appears after windows is starting(after this)
-Blue screen of death always appears when I am trying to connect for more than 7/8/9/10 times on some of wireless networks,and very rarely appears when I'm playing a game or doing something on the internet.
-Some programs freeze sometimes such as Firefox,DivX Player,Winamp...
Please help me guys!
 

A:blue screen of death,black screen,freezing...

6 more replies
Answer Match 83.58%

So for the past 2 weeks I've been crashing none stop usually after playing game for about an hour or just browsing or watching a movie, its a mixture of Page fault in none page area, Memory management, IRQL not less or equal, among others. I don't know whats causing the crashes or any help would be greatly appreciated. i had this laptop for since early december 2009.

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Turion(tm) II Dual-Core Mobile M500, AMD64 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 3836 Mb
Graphics Card: ATI Mobility Radeon HD 4200 Series, 320 Mb
Hard Drives: C: Total - 291444 MB, Free - 24376 MB; D: Total - 13495 MB, Free - 2249 MB; F: Total - 99 MB, Free - 95 MB;
Motherboard: Hewlett-Packard, 3642
Antivirus: Norton Internet Security, Disabled
 

A:Blue screen of death, Freezing, and black screen

Have you installed anything lately? There could be some program or service doing something that isn't needed.
How's the case temperature? Perhaps it's running too hot.
 

2 more replies
Answer Match 83.58%

Hi, I've been going through some problems with windows, I'll try to be the more clear and organized I can, let's start with my config and the symptoms I'm getting:PC Config:Core2Duo E6550GA P35 DS3 (rev.2.0)2x 1GB DDR2 800Mhz Kingston (in dual channel)GeForce 7200GS 256mb (512mb with turbo cache)HD321KJ Samsung Hard DriveSamsung SH-S203B DVD driveCorsair VX450W Power SupplyOS: Windows XP Pro x64 SP2 (I upgraded to sp2 just yesterday, before that I was running sp1)Symptoms: There are three types of symptoms, the most common is the pc simply restarting, note that I've already disabled the "automatically restart" in the system properties window and it keeps happening, other is the screen freezing, and then I have to restart it, and the last and less common is the famous Blue Screen of Death, also, but for only two times, instead of the freeze or the blue screen I got an empty black screen. All these types of crashes can happen independently of what I'm doing, It has happened while burning dvds with Nero, scanning with anti-virus, browsing the net, or even while I'm asleep and only the bittorrent client is up. Though, there is one peculiarity I think should be important, there's one program, the VirtualDubMod 1.5.10.2 (build 2540/release), which is used for various kinds of video manipulating jobs, that every time I'm enconding a video with it, there is a crash, and I'm convinced it's not only coincidence, cause I have tried a... Read more

A:Pc Restarting, Screen Freezing, And Blue Screen Of Death

Sounds to me like a hardware problem, but the stability test should have revealed that.I'd suggest searching your hard drive for files that end in .dmpThen use this post to perform an analysis on the .dmp files: http://forums.majorgeeks.com/showthread.php?t=35246Make sure you select the Debugging Tools for x64 Windows when downloading them.Then post the results here for us to have a look at.

38 more replies
Answer Match 83.58%

This is what someone else wrote in another topic: http://forums.techguy.org/windows-vista/741250-windows-warning-message-win32-adware.html

"I booted my computer up today, and saw my background wasn't available anymore. Then I see the message, "Warning! Spyware detected on your computer! Install an antivirus or spyware remover to clean your computer". It says that Win32/Adware.Virtumonde and Win32/PrivacyRemover.M64 are on my computer."

I had the exact same problem but i followed the instructions that someone posted in that topic, these were the instructions posted by "drdrew1469":

"I just got through fixing this (I hope). What it did here was change the background and set the screensaver to the sysinternals bluescreen screensaver (which you may be seeing) while at the same time setting policies in the registry to disable the two aforementioned tabs in the Display properties window.

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System \NoDispBackgroundPage and [same]\NoDispScrSvrPage (they are both set to 1. Delete both entries.

Then check HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run for any funky alphanumeric filenames (I'm pretty sure it's just a random string anyway so posting the string probably won't help you much). Delete these keys and the associated file(s). (Doesn't hurt to check msconfig either, but I found nothing there)."

I thought that it had bee... Read more

A:Solved: Blue Screen of Death as screen saver

I removed two files on my harddrive, lphc1gbj0ecft.exe and lphc1gbj0ecft.scr, and now the bluescreen-screensaver is gone!
 

1 more replies
Answer Match 82.32%

Hi, i have a custom built PC. Earlier, i was watching a movie on the Sky Player and the screen froze and then the computer restarted itself and then restarted itself again, then i had the choice to start in safe mode etc.

I am currently on in safe mode and there are lines all across the screen which move/vanish when i run the cursor over them.



This is a picture taken with my phone of what the screen looks like in safe mode, print screen doesn't show the lines.



system info, no point in putting the graphics info up because they're showing as N/A (which i assume is due to being in safe mode).

I apologise if any of this post is messy, i can't really see the screen properly.

This problem has happened before, i used an air-duster to clear some dust from inside the tower and it worked fine after a couple of days, however this time it hasn't worked.
Any help would be greatly appreciated, i'm not very good with computers.

I have the minidump file if that is of use to anyone?

A:Blue screen, then lines on screen.

Hello,

This seems like a graphics card problem; whether it is fixable or not is uncertain at this point.

Could you try a different video card in the system? Perhaps borrow one from a friend, or steal one from a different computer.

18 more replies
Answer Match 81.9%

Blue screen of death now just black screen...that features a blinking underscore icon....

The horror....the horror....

What have I done?

Anyone have any idea how to get my PC back running?

Cant run TSG Sysinfo obviously. The PC is running Windows XP 32 bit.

-----------------------------------------------------------------------
 

A:Blue screen of death now just black screen...

16 more replies
Answer Match 81.9%

At least 3 times today, I have gotten the Blue Screen of Death. I don't see anything on it that lists a problem. When computer starts up, it doesn't even get to the "Starting Windows" part, its just a black screen. I have looked and Googled and can't find any help with this problem. Has anyone had this happen to them? PLEASE HELP!

A:Blue Screen of Death Followed by Black Screen

Hello and welcome BeachGadog see this
Troubleshooting Windows 7 Failure to Boot

PS Some system specs would be helpful too mate
System Info - See Your System Specs

1 more replies
Answer Match 81.9%

Hi
My brother has a Sony Vaio FW21L laptop with Windows Vista Home Premium 32bit installed. Yesterday when he turned it on after the welcome screen appeared he got a blue screen of death. He says he hasn't installed any new devices or software and he ran a virus scan which revealed no problems. He tried a system restore to the day before and also entered safe mode but the problem persists.

Can anyone tell me how this can be solved?
Thanks
 

A:Solved: Blue screen of death after welcome screen

Problems that persist in Safe Mode and after System Restore's are usually hardware ones. But I'd also try a restore to a few days further back before the problem.

If the problem remains, start by checking the memory.

In Vista you can do this by running mdsched.exe

On reboot when the scanner appears, press F1 and run the extended tests.

I don't think it will show any non Microsoft drivers, but --

I can run a debugging utility on the dump files if you do this:

1 > create a new folder on the desktop and call it "dumpcheck" or whatever you like
2 > navigate to c:\windows\minidump and copy the last few minidump files to that folder. *this assumes 'c' is your boot drive, if it is not, subsitute accordingly
3 > close the folder and right click on it and select Send to Compressed (zipped) Folder.
4 > use the "manage attachments" in the "advanced" reply window to upload that zip file here as an attachment.

This might point us to a non Microsoft driver causing the error, if one exists for it.
 

2 more replies
Answer Match 81.9%

I've gotten two blue screens recently and I can't figure out why.

It happened, both times, when I was playing a hi-def movie with Media Player Classic.

System:

abit IP35 Pro mobo
Intel E8400 cpu
EVGA 8800GT gpu
Scythe Ninja heatsink
Corsair HX520 psu
8GB Corsair RAM

I've tested the memory and it seems fine, as do my hard drives. I've remounted the heatsink on the CPU.

Should I try updating the BIOS on the motherboard, since there are known problems with my cpu and mobo? Would that help? The only know problems are with temperature reading, and a BIOS update is said to fix them.

I had Windows check for a solution and it said there was most likely a hardware problem - RAM, CPU, power supply, or motherboard. I was hesitating to update the BIOS, but if it's a temp. problem with CPU, then I don't have much of a choice.

Here's what was in the pop-up window after I rebooted Windows:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 87B30020
BCP3: B2000040
BCP4: 00000800
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\Mini082208-02.dmp
C:\Users\James Travis Rolko\AppData\Local\Temp\WER-74796-0.sysdata.xml
C:\Users\James Travis Rolko\AppData\Local\Temp\WER5FFD.tmp.version.txt

Read our privacy statement:
http://go.m... Read more

More replies
Answer Match 81.9%

All of a sudden, I get the Blue Screen of Death, then when I restart computer the screen stays black, even though its running. Any help would really be appreciated.

A:Blue Screen of Death Then Black Screen

If you can get to the F8 screen, try last known good configuration option. If can't reach that screen, pretty soon regular BC techs will appear, follow their advice, you can't go wrong.

1 more replies
Answer Match 81.9%

Hi.

I have a serious problem at my hands.

This moring when I turned on my laptop a '0x00000051 (0x00000001, 0xL1, 0L008, 0x00716000, 0x000001D6)' Registy Error appeared on a blue screen. It then continuously restarts, never making it to the logon screen.

I have tried to reboot in Safe Mode and 'Last Known Working' mode but the same blue screen appears.

As I dont have a XP Home install disk (only boot disk supplied with laptop), I could not repair my registry so I have installed a parallel version of Windows XP Pro that came with another PC. I can access the hard disc so I will be able to back up most of my files BUT I cannot access the Documents and Settings of my user from the original OS because I selected 'Make this Folder Private' when I made the account.

Does anyone know of a way to disable the 'Make This Folder Private' option on an account that is on a parallel version of XP?

Laptop = Hi-Grade W6700 (higrade.com

Any help would be appreciated so much! Thanks
 

A:Blue Screen Of Death before Logon screen

I think you will have to take ownership of the folders and files you want to access.
 

2 more replies
Answer Match 81.9%

I'm sure everyone is familiar with the popup in Vista where your screen is grayed out and you must "Continue" or "Cancel" to run an administrative function... Well... My copy of vista has decided that it would be much more humorous to give the user the gray screen without the dialog box. Quite annoying. The only way to get back is to CTRL ALT DEL, and then just click cancel when that screen comes up. But in the meantime, I pretty much can't make any changes to my computer because I don't receive the continue / cancel dialog box...

Any suggestions?
 

More replies
Answer Match 81.9%

my Laptop version  is g6-1256ee Recently, at start up black screen for 30 seconds then "welcome screen" then black screen for 30 second when i install any program like MSOFFICE 2013 and then open the "WORD program" it give me "blue screen" "death screen", it happen also with "GOOGLE CHROME" my RAM is "6 giga"and i made a check on it by "Mdsched" and the result no problems, hint the RAM doesn't work with it full potential only 23-25 % as max Please could you help me Thanks for your cooperation.

A:SLOW and BLUE screen "DEATH screen"

 I also check my "hard disk"  and its ok no problmes in it

1 more replies
Answer Match 81.48%

Hey,I have a big problem,after my computers starts up,the blue screen comes up then disappears,then its starts the automatic repair and disappears again,then the screen goes blue and its stays like that all the time.Cant use the computer anymore,please help thanks

A:Screen satys blue after blue screen of death

Have you tried CTRL+ALT+DEL which should when you get the blue screen should take you to be able to do a factory reset.

1 more replies
Answer Match 80.64%

I have made a search, and cannot find a topic on my problem. in the lower left hand corner of my screen centering 2 & 1/8" above bottom of 17" screen, and starting 1/4" from left edge of screen and ending 3" from left of screen I have lines of what I imagine are pixels leaving dark lines they have only been noticed in the last few days, and they have grown longer since last night when I measured them. When I look at the screen through a magnifying glass, I see a very small checkerboard of black lines, which I presume are pixels, there are six filled in lines, the top one being 2 & 3/4" long, and the ones below it are shorter, the lines then seem to fill in and become solid in the very center of the line. Is this a common sign? I thought it would be a sign that my monitor was experiencing a burnt image (like Old TV's test patterns becoming burned in) untill I made the search on the forum, then I was really baffled.
Past responders ask posters to do a print screen, I have not been able to print screen since I was using a DOS system, How do yo print screen these days? My XL help and support tells me to hit ALT-print screen, nope doesn't work for me. how do you print screen with XL? I have the PRINT SCREEN/SYSRQ key, but when I hit it nothing happens. Thanks in advance for any and all answers I can get. Oh by the way, it is a GATEWAY FPD1730 LCD monitor, serial #MUL7007A0075462, manufactured in March 2004
 

A:Fine (multiple)lines seem to be burnt into screen

6 more replies
Answer Match 80.22%

Recently, my LCD monitor started showing red and blue lines in certain areas of the screen, especially outlining images. I at first thought that someone had tinkered with the monitor display settings and made the reds and blues more intense, but I found that messing around with the color settings did nothing to get rid of these lines.

My monitor then died a few days later (although I'm not sure if it's a coincidence), so I replaced it with an older monitor, and that one as well showed the red and blue lines, so I replaced it again with the same result.

I figured that it's not a problem with the monitor because I took a screenshot of my problem, saved it as a .png file, and emailed it to myself on another computer, and on that computer the red and blue lines do not appear in the image.

I have an NVIDIA GeForce 6150SE nForce 430 video card that came with the computer, and my OS is Windows 7 (64-bit). Any help is much appreciated, thanks.
 

A:Red and blue lines on screen

You have to swap out the graphics card. It's really the only way to eliminate the video card as the source of the problem. Goofy lines like that can be symptomatic of the video card failing. If the driver in the machine didn't have a problem before, and there haven't been any other major changes in the hard or software configuration, stands to reason that the card is the prime suspect.

I'm not exactly sure where in the video system a screen shot is taken, but it seems certain it's well before that actual screen output. Were we using the same video connecting cable on all the different screens? Beause you might try another monitor cable first if it was.
 

5 more replies
Answer Match 80.22%

Packard Bell X9810 in the middle of a program, the computer froze and blue lines have appeared on screen, unable to use the computer at all: any help would be appreciated. Gordon

A:Blue lines on screen

Can you get in with safe mode and go to device manager to look for any yellow markers or problems with grahics driver?
Possibly even a system restore to get back to normal, from safe mode?

Worst case scenario, give this a try. If you can get in be sure not to make a selection that would cause you to lose your stuff, such as the back up image

If you create a recovery DVD, you may be able to boot to recovery options
Create Recovery DVD

The Vista recovery disk is used to boot Vista when it won't boot - to run Startup Repair, System Restore, access a Command Line, Recover using a Vista Backup Image, etc.
System Recovery Options

If Vista will not start now, boot the Recovery CD to run Startup Repair which automates System Restore as well as numerous other tests including System File Checker which can repair system files which are not corrupted beyond repair.

If Vista still will not start, try booting into Safe Mode to run sfc /scannow to repair System files.
Special Thanks Given to Seven Forums.

Below is a bulletin distributed by MS to explain the start up procedure when Windows will not boot.
Startup Repair. Startup Repair is a Windows recovery tool that can fix certain problems, such as missing or damaged system files, that might prevent Windows from starting. Startup Repair is located on the System Recovery Options menu, which is on the Windows Vista installation disc. If your computer has preinstalled recovery options, it might also be stored on your computer's ha... Read more

1 more replies
Answer Match 79.38%

Hi,

I have a Dell XPS M1530 Laptop that I've had for about a few years now. I suddenly notice that there is blue vertical lines. I try closing the laptop monitor and reopening it to see if it goes away. It would work for a short period of time but now the lines are constantly there. I can close the laptop lid down to a certain point and there will be no lines and the display will be fine again. I'm guessing the display wire could possibly damage. Is there anything I could do to replace the wire or fix the problem myself?
 

A:Screen has blue vertical lines

http://www.youtube.com/watch?v=SCWiEdaditA

its possible to fix but even i do not like to touch lappys
 

2 more replies
Answer Match 79.38%

Since a couple of weeks, I have a problem with my laptop screen. From time to time, suddenly, everything on the screen disappears and I get a screen with only white and grey lines (see picture attached). When this happens, I can't use the laptop anymore and I have to shutdown by pressing the power button. On some days, I have no problems, on other days, this happens several times.
What can be the reason and how can this be solved?

Kind regards,
Paul

A:Screen with Blue and Grey Lines

Does this problem occur in warmer climates (or after the machine has been on for a while)? Has the laptop been twisted or dropped? Has there been any maintenence performed (cleaning dust, device driver updates, changes in hardware, etc.) on the machine recently?

3 more replies
Answer Match 79.38%

I have a GF 970 which demands a 8pin and a 6pin pcie as the Z820 only supports 2x6pin I used an adpater 6->8I read somewhere that the 6pin HP Z620 will deliver more then 150W which is the rated power for a  8pin now I have the issue that in some games my  screen is going black at start and I can still hear some sounds but basically I need to hard reset the PC then In these games it happens all the time e.g. GTA Vother games are fine 

More replies
Answer Match 78.54%

My system had become very slow. And there also appears to be some problem with the graphics. When I close a window, there remain blue or yellow lines on the desktop, where the border of the window used to be. I saw a suspicios process whose name I have forgotten, but I remember that the search I conducted returned that it has something to do with nvidia and is not actually a malware maybe. It was taking too much resources. I ended it and the performance got a little better. I also did something I don't remember, after which, that process doesn't start again.

Also, dap.exe was taking so much resources. The process was there even after I exited DAP. Although DAP was functioning perfectly. I also uninstalled DAP. The process doesnt come back now.

But the blue and yellow lines are still there. And the system is still slow. What do I do???

A:Yellow And Blue Dotted Lines On The Screen

Trie to connect the mon itor to another cvomputer to make sure that it is not the monitor at fault. Secondly update the drivers for your video card.

1 more replies
Answer Match 78.54%

Hi, good morningI'm a bit worried about my laptop, there's like a month and a half since i bought it and i hadn't have a problemIt's an HP 240 G4, it's powered by:Intel Celeron N3050 1.60Ghz, 2GB of DDR3 RAM, and a 500GB HDDIt's a pretty basic laptop but it had been working fine, i have to mention that it's an used laptop, i don't have a warrantyBut since all the time i have been using it ( a month and a half) it had been working properlly, so i don't think it came with any problems or at least they hadn't shownTwo weeks ago i bought a stick of 4GB of ram, since this laptop has only one slot i had to remove the one stick of 2gb that came with the laptop, Both ram are equals on voltage and bus frequence, so it was running excellentAfter two weeks from then, it suddenly started to give blue screen problem, blue screen says:whea uncorrectable error 0x00000124and laptop rebooted, sometimes it also shows flickering lines of colores, they even appear don't letting to show the blue screen and rebootsSometimes i can use laptop for about 5 minutes, other times i can use it for 2 hours or more, and some other times it doesn't even finish bootingbut it seems like it becomes more persistent every timeI tried by changing ram to the original (2GB) stick, resetting BIOS battery and nothing..i don't think it's hard drive nor operative system problem,I tried to install Windows 7 from USB and before getting to the partition selection section, blue screen (with old windows 7 form... Read more

More replies
Answer Match 78.54%

My pc was working perfectly, I came back to it yesterday and when I moved the mouse the display went kinda low colour and boxes about 5mm apart appeared all over the screen, The computer then BSOD'ed and shut down, I started up again thought it was nothing and I got into my user it started to do the same thing again, It blue screened shut down and now when I turn it on there is no image, I Have tryed taking it down to bear bones and replacing re-inserting every component, But that doesn't seem to have helped, There are no beep codes, and it is doing my head in, I am 15 and just spent £400 building this computer. Can anyone help??
Thanks
 

A:Computer Boxes and lines then blue screen =/

10 more replies
Answer Match 78.54%

I just installed Win7 x64 and whenever I open an image (jpg) the monitor screen goes to blue and white lines with dashed black lines. This also occurs on occasion when I open menus or use an application that requires openGL. I did run Video Memory stress Test v1.7 to see if there were any problems with my video ram (none found).

I have had this screen problems before like this, but it only occurred in Morrowind, otherwise it never happened in windows XP.

The computer does not crash, it just displays the blue, white and black lines for 10 to 30 seconds and then flips back to normal.

Any help would be appreciated.

Computer:
ASUS N2N32-SLI Deluxe Motherboard
AMD X2 4600+
eVGA geForce 7900GT
ViewSonic VX2235wm-3 driver shows up at ViewSonic VX2235wm-7
EDIT: Win7 does not have any display issues over a remote connection from a win xp machine. I worked for several hours remotely from home to my office computer and other then a couple of major lag spikes, it has worked without a problem.

A:Screen goes to blue,white,blk lines when opening an jpg

Hello Tc,

Welcome to Seven Forums.

Do you have the latest driver installed for your graphics card? EVGA | Support | Download Drivers

Hope this helps.

Gary

9 more replies
Answer Match 78.54%

Ok so here's the problem. My friend recently bought a PowerColor HD7850 2GB GDDR5 graphics card and after installing the card and the drivers, and restarting windows; the loading screen gets all kinds of lines across the screen up until the point where you enter in your log in information and then a blue screen. The AMD install manager is responsible for downloading and installing the latest driver for his device, so he didn't download a bad driver since it comes directly from AMD. Whenever he reattempts to install everything, he has to reinstall windows due to being stuck in the blue screen loop when he attempts to log in to windows regularly. Obviously without the drivers, windows can't detect his card. But any attempt to install the drivers causes the "tears" in the screen.

Here are the specs of his desktop
CPU: Intel Core i5 3570k CPU @ 3.40GHZ
Motherboard and slots: Gigabyte GA-Z77-D3H -- 1x PCI-E 3.0 x16, 4x USB 3.0
8 gigs of Ram
Plus the aforementioned gpu.

Can anyone point us in the right direction as to what the problem may be?

He pretty much can't use his desktop because his card isn't working.

Any help would be appreciated. Thank you.
 

A:Graphics card causes lines and blue screen.

7 more replies
Answer Match 78.54%

Okay so I've been running a Windows Vista since 2008 and all was fine until around Summer 2010. I came home, was told to update McAfee, so I did. Upon that update, my screen began to "blow up" into a popcorn type screen, and if audio were to be playing it would freeze the audio in the sound, a repeated sound.​
So I uninstalled McAfee and it seemed to solve the problem. But playing YouTube would cause it to go boom again. So after about a year, I contacted DELL who seemed to fix the issue by updating my graphics card. The issue was fixed for a good 24 hours and now it does it again.​
Expect the popcorn/repeating sound lasts for a minute, and then goes to the BSOD and gives me Physical Memory Dump and counts to 100%. It does this if I play a YouTube video, go to a flash site, etc. Sometimes it'll just do it cause it can. Also, I cannot log onto my computer before 11AM or it "blows up" automatically.​
I usually run: Internet Explorer, MSN Windows Live Messenger, iTunes, Adobe Photoshop CS2, and sometimes Microsoft Word. I have considered updating to Windows 7 to see if it fixes the issue. I have 4GB Memory, and someone else from Dell said a memory upgrade would do. But I am so lost at what to do, and don't have the money to lavishly spend on fixing the computer. I have pictures of the popcorn screen and have turned off the automatic restart.

Also, my computer told me this morning it had an issue for lisencing and I feel th... Read more

A:{PLEASE HELP!} Physical Memory Dump + Blue Screen Of Death + "Blow Up" Screen

16 more replies
Answer Match 77.7%

Hi, im having some trouble here. I just installed a fresh copy of windows vista ultimate (32bit) on my pc and installed my new nvidia gefore 9300GE graphics card. I installed the OS with no problems, but then when i did the windows update and it grabbed the drivers for the 9300ge, after it asked to reboot, it just sits at the BSoD. Im positive its the nvidia driver because when i boot into safe mode and remove just the nvidia driver, i can then reboot normally. What can i do? Has anyone had this problem? I really want to use my graphics card!
 

A:Vista getting black screen of death when i install nvidia geforce 9300ge driver

I would suggest getting all of your updates done before adding any additional programs/drivers.
 

2 more replies
Answer Match 77.7%

My lapi serial no is [Personal Information Removed] MODEL NO IS G4-1303AU MY LAPi suddenly shut down having lines on the screen problem arises in window 7 so I formated the windows 7 and update the windows 10 still problem arise when it is shut down and after some times it get started

More replies
Answer Match 76.86%

Hello,

I have a problem with my computer. I just restarted it, and it ended up booting with purple/blue lines all over the screen.

So the first thing i did was go into device manager. All it told me was a caution symbol next to my NVIDIA geForce 8500 GT. so i downloaded and reinstalled the drivers for it. No effect.

Then i booted into safe mode to find if it was a motherboard issue. The lines remained.

At this point im asking all of you at this fourm, what is the issue and how do i fix it? Thank you.

A:Purple/blue lines over screen, not sure if driver or motherboard issue

If its an add in card re-seat it in its slot and make sure any power cables are securely connected. You may want to unplug the power supply from the wall plug so your PC doesn't accidentally start up while you are working on it. Also make sure the heat sink is free of dust and the fan (if it has one) is working correctly. You may want to check your case fans for dust too while you have the case open.

5 more replies
Answer Match 76.86%

Hi all, I'm sure my specific issue has been covered, but this is my problem:

I restarted my computer due to running slowly, when it was starting back up, it prompted me to either "Run Startup Repair - recommended" or "Start Windows Normally." When opting the latter, the screen would go black, then go back to the same prompt. When selecting the startup repair, the screen goes to a blue screen with squiggly white lines with a hummingbird and a branch on it (wtf?!) and stays there for a long, long time. Is this repairing? How long do I wait? Is there anything I can do?

I've also tried restarting and trying F8 to get to Last Good Configuration, but that doesn't work either Please help!
TIA!

A:blue screen with squiggly white lines with a hummingbird and a branch

  
Quote: Originally Posted by GPerry79


Hi all, I'm sure my specific issue has been covered, but this is my problem:

I restarted my computer due to running slowly, when it was starting back up, it prompted me to either "Run Startup Repair - recommended" or "Start Windows Normally." When opting the latter, the screen would go black, then go back to the same prompt. When selecting the startup repair, the screen goes to a blue screen with squiggly white lines with a hummingbird and a branch on it (wtf?!) and stays there for a long, long time. Is this repairing? How long do I wait? Is there anything I can do?

I've also tried restarting and trying F8 to get to Last Good Configuration, but that doesn't work either Please help!
TIA!


Blue screen is a screen for when your computer crashes but no hummingbird. You can check by going to c:\windows\minidump and seeing if there are files with the extension *.dmp. If so upload them to us.

No DMP files included in upload please try this method

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
*... Read more

2 more replies
Answer Match 76.86%

Hi guys,

My Dell computer running Vista keeps crashing and starting back up with these wierd wavy blue and yellow lines across the whole screen. The screen resolution also reverts back to 800x600 and only 3 other resolution options even remain. Usually I'll reinstall the video card drivers and the problem goes away, for a bit. I even reformatted the computer thinking it was a virus and the same problem reoccured. My problem seems very similiar to these posts here:
http://forums.techguy.org/windows-vista/941740-weird-wavy-blue-lines-startup.html

http://www.bleepingcomputer.com/forums/topic245362.html

According to those posts the answer seems to be my video card crapping out, if this is the case I'll have to get a new one but if you think there might be any other answer, please let me know.

Thanks.
 

A:Computer Crash with wavy blue and yellow lines on screen

6 more replies
Answer Match 76.86%

Windows 10 has been working perfectly on my machine but then in a recent update (last month), one of the big ones where the screen goes black with a percentage circle of the installation progress (the same one as when you upgrade from a previous version of Windows), after a while the screen goes a light blue colour (not the BSOD) with white lines in the middle of the screen.I presume it is a problem with the graphics driver so I have set the option to not update drivers automatically but the problem still occurs when the PC forces the update automatically.Has anyone else come across this issue?It is a work PC so I'm loathed to do a fresh install as that will take a morning out of my hectic work time. Then I have to use the F8 key and roll back to before the update, which then takes another hour or so out of my time. Why it can't just update in the background like the old days, I don't know. Any help would be appreciated. My frustration is seen in the photo below...

More replies
Answer Match 76.86%

Random Blue Thin/Dotted Lines on My HP Laptop Screen

I was recently transfering files to my new laptop, and uninstalling programs on my old laptop when I suddenly got thin blue lines randomly on my old screen in dark or black areas (see images). It is not in the same location on the screen depending on what I am viewing.

I hooked an external monitor to my laptop and the image is perfect. Another odd thing is when I screen capture the bluelines and view the image file on another PC, they do not show.

Any ideas?

Thanks!
 

A:Random Blue Thin/Dotted Lines on My HP Laptop Screen

6 more replies
Answer Match 76.44%

Hello everyone, never posted here before, so if I've left out any key information please let me know...

Basically my problem is: I installed the new spiderman 3 PC game a couple of days ago, and it was perfect. Ran like a dream, no lag, crashes, nothing. A few days passed, then I tried to launch it and it gave me a video card blue screen. I've installed the newest drivers and direct x for my graphics card... all the other games I have are working. It's just the one game that won't seem to run, and every time I run it results in blue screen.
This is the error I'm getting


I have a GeForce 8800 GTS, AMD Athlon 64 x2 Dual 2.21 GHz, and 2.00 GB of RAM.

Any ideas?

A:GeForce 8800 Blue screen

Just to rule it out ... Was this game downloaded in some fashion?

10 more replies
Answer Match 76.44%

Hi,

I'm having a problem where if I double click on a video or a picture, my screen goes to a pixleated green screen, then when I hit ctrl-alt-del, it goes to a pixelated blue screen. When this happens, I hear the video card fan go to full speed and I have to restart to fix the problem. If I drag the picture or video into media player first, it works great.

I've seen these screens before when I had video driver issues with another compuer. I have the Nvidia driver 8.15.11.8172 installed now. When I tried to upgrade to the190.38 drivers, I got the green screen of failure on start up, and had to reboot in safe mode and roll back the drivers.

The video card is Nvidia GeForce 7900 Gt.

Can anyone offer me some tips or advice? It would be greatly appreciated

Thanks,

Scott

A:blue screen with GeForce 7900 GT

  
Quote: Originally Posted by Scottyp


Hi,

I'm having a problem where if I double click on a video or a picture, my screen goes to a pixleated green screen, then when I hit ctrl-alt-del, it goes to a pixelated blue screen. When this happens, I hear the video card fan go to full speed and I have to restart to fix the problem. If I drag the picture or video into media player first, it works great.

I've seen these screens before when I had video driver issues with another compuer. I have the Nvidia driver 8.15.11.8172 installed now. When I tried to upgrade to the190.38 drivers, I got the green screen of failure on start up, and had to reboot in safe mode and roll back the drivers.

The video card is Nvidia GeForce 7900 Gt.

Can anyone offer me some tips or advice? It would be greatly appreciated

Thanks,

Scott


Hi and welcome to sevenforums

we really could use your system specs. Os (32bit or 64), and install clean or upgrade.

Ken

9 more replies
Answer Match 76.02%

Hi so I am having problems with my computer. About 6 hours ago I had left my computer running for around 2 hours, in complete inactivity, and when I started using it the screen froze and turned off. Deciding to turn it manually off, I then found vertical blue lines appearing on the windows screen as it started up. This just got worse as the screen went totally black but the computer kept running. I assume this is not a hardware problem, because I am typing this now on safe mode with networking and there is no blue lines.
I already ran some steps of my own before asking for help from this website with avg, superantispyware, combofix, malewarebytes, and a temporary file cleaner by old timer. The found some viruses and spyware which they deleted.
I haven't seen now if my computer can boot in normal mode now, because I fear it might get infected again.
P.S. I think I followed the instructions for the GMER scan mostly right, but I'm kind of confused on the part if I don't get the message that the tool warns of rootkit activity. What should be checked on the right hand side then cause mine didn't include c drive (the drive I have information on) checked.

One more thing a year ago a dell on the phone tech support guy made me create a totally different partition or operating system on my computer where I have had to choose xp version A ( the old one) or version B (the one that I am having problems with right now) everytime I turn on the computer. Could this someh... Read more

A:Blue lines at startup? Screen shuts off when I boot in normal mode

The main problem with my computer not being able to load and the vertical blue lines was solved. The video card indeed appeared to be burned out or malfunctioning.
There was as a result no virus affecting my system.
In case anybody is reading the main way you can use to see if theirs a virus or your video card is malfunctioning is by running video tests or if any lines appear on the dell logo because viruses usually affect your system after the dell logo loads and when windows starts to load
 

1 more replies
Answer Match 76.02%

i keep getting this when i boot into vista every other time..

** STOP 0x0000005c (0x0000010b , 0x00000003 , 0x00000000 , 0x00000000)

What does it meean??
 

A:Blue Screen Of Death**help!!***

Can you boot into safe mode?
 

3 more replies
Answer Match 76.02%

Somebody please help?!!!!
For some time now a computer that I have has been constantly restarting, freezing or just being annoying.
A friend of mine has had a look at it and he can't see any problems. He suggested re-installing windows so I tried that, low and behold enter the Blue Screen, It has an error message ( USBPORT.SYS - Address F83DB50D) If anyone can think of anything please contact me. Ty for ur time.
 

A:Blue Screen Of Death

The entire error message would be more than helpful.

But after reinstalling Windows, did you also reinstall all the motherboard chipset drivers? They would have been lost in a new install, and the system could be limping along on the default Windows ones.

A bit more detail as to Operating System version and hardware make/model would be helpful also.
 

2 more replies
Answer Match 76.02%

Hi to all,
I just got an HP Pavilion a1737c, using operating system Vista Home premiun. I am getting what I call the blue screen of death, which I think is a Windows error page? I have attached a picture of the screen, because I can't get a screen shot when it happens. It seems to happen most when I am trying to download something from Itunes to my 30gig IPOD.
Also, can someone please tell me how I change the information that shows up at the bottom of my posts because it is out dated, now with the new computer.

thank you
Rob
 

A:Blue screen of death plz help

Looks like I don't know how to add an attachement also, if you can give some help. I did what the screen said.
 

2 more replies
Answer Match 76.02%

version of windows:

32 bit operating system
not original installed os
full retail version

system hardware 4 years old
os installed and reinstaled 2 days ago because the BSOD was showing up

guys, please help!

A:Blue screen of death

  
Quote: Originally Posted by speedtouch


version of windows:

32 bit operating system
not original installed os
full retail version

system hardware 4 years old
os installed and reinstaled 2 days ago because the BSOD was showing up

guys, please help!



Love to but you uploaded the app not the dmp files. Please try to upload them again.

Ken J

4 more replies
Answer Match 76.02%

IM running homexp and I keep getting the blue sceen error stop oxoooooo8e & also certain programs stop running (windows has error and must shut down).About 3 weeks ago I installed new mobo asus r800v deluxe & raedon video card.I tried uninstalling video card & nothing.Ive even uninstalled a lot of programs & ziltch nothing.All the latest drivers are installed.It is not always the same errors or numbers.

A:blue screen of death

if u havnt got any impotant stuff on your computer you can wipe of the computer

or a safe recovery if you do have important things

and theres this thing i heard about that rewinds the computer back to the last time u turned it on but i dont no if that will work

4 more replies
Answer Match 76.02%

Ok this has been happening Randomly for the past month but ive ignored it and tried to deal with it trying to figure out the problem but i cant so anyway i wrote down all the info from the blue screen.

What happens it my computer just kinda boots down and goes to the bluescreen saying its done a minidump and all that.

Well here is what i wrote down:
*STOP:0x0000008E(0xC0000005,0xF9D05A51,0xF3815648,0x00000000)

SACMXPI.SYS.ADDRESS F9D05A51 base at F9D05000 datestamp 3Fbc74db

OK anyhelp would be gratefull and thanx in advance

i have also done every scan possible i.e. Panda . Norton , Adaware ,SB search and destroy,Registry Mechanic, Stinger , A2 malware. I will post a HJT log.

Logfile of HijackThis v1.98.2
Scan saved at 01:09:04, on 16/12/2004
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccProxy.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Norton Internet Security\ISSVC.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Co... Read more

A:Blue Screen of Death Again and again..

16 more replies
Answer Match 76.02%

Hello Everybody,,

BSOD is really pissing me off !!

with audio and video cracks just moments before the blue thing appears ><"

BSCode 124 , d1 , 50 all appeared to me --"

please I need ur help here ,, here's my system info:

Laptop Toshiba A500-19W
Win 7 Home Prem x64 OEM
8 months since I purchased this system
never did a format

----------------------

all the files u request can be found in the attachments ,,

Thx 4 ur cooperation

-------------------------------

A:Blue Screen of Death ..

Two of your five latest crash files (Sept. 30 2010) point to stop 0x124 GenuineIntel_PROCESSOR_BUS_PRV. Other two crashes were caused by Jmicron driver, and one last dump shows the crash was caused by the Intel Storage Driver (X64_0x7E_iaStor+124ad).
Please, take the time to read this thread: Stop 0x124 - what it means and what to try

093010-21013-01.dmp, 012310-19765-01.dmp
Caused by : hardware
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred
BUGCHECK_STR: 0x124_GenuineIntel, Arg2: fffffa8004ca67c8
PROCESS_NAME: System
Stack: nt! - KxStartSystemThread+0x16, PspSystemThreadStartup+0x5a, ExpWorkerThread+0x111 ...
FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_BUS_PRV

093010-19312-01.dmp, 82010-22510-01.dmp
Caused by : jmcr.sys
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced
PROCESS_NAME: System
Stack: nt!, jmcr
FAILURE_BUCKET_ID: X64_0x50_jmcr

070610-51293-01.dmp
Caused by : iaStor.sys
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
PROCESS_NAME: System
Stack: iastor
DEFAULT_BUCKET_ID: NULL_CLASS_PTR_DEREFERENCE
FAILURE_BUCKET_ID: X64_0x7E_iaStor+124ad


~~~~~~~~~~~

You have some drivers worth updating if this weren't BCCode:124. Yet, you may want to try:
jmcr.sys Mon Jul 20 14:39:02 2009
JMicron JMB38X Memory Card Reader Driver/JMicron JMB38X Flash Media Controller Driver
Driver
iaStor.sys Fri Jun 05 04:53:40 2009
Intel Storage drivers
http://downloadcenter.intel.com/Default.aspx
Thpevm.SYS Mon Jun... Read more

3 more replies
Answer Match 76.02%

I don't really understand what's wrong. I recently updated my graphics card to a new one. I made sure everything is plugged in correctly and so forth. Hopefully, somebody could help me figure out my problem.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 4e
BCP1: 0000000000000099
BCP2: 0000000000067723
BCP3: 0000000000000002
BCP4: 00000000000BD522
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\072813-15085-01.dmp
C:\Users\Asterion\AppData\Local\Temp\WER-31371-0.sysdata.xml
 

A:Blue Screen of Death

10 more replies
Answer Match 76.02%

One of the household computers has suddenly started to crash. I'm uncertain as to why, but would appreciate it if someone could take a look at the minidump file and see what the issue is. Thanks.

A:Blue Screen of Death

Hi,

The attached DMP file is of the KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e) bug check.

This indicates that a kernel-mode program generated an exception which the error handler did not catch.

Let's go ahead and enable Driver Verifier for more information as the dump contains very little:
Driver Verifier:

What is Driver Verifier?

Driver Verifier is included in Windows 8, 7, Windows Server 2008 R2, Windows Vista, Windows Server 2008, Windows 2000, Windows XP, and Windows Server 2003 to promote stability and reliability; you can use this tool to troubleshoot driver issues. Windows kernel-mode components can cause system corruption or system failures as a result of an improperly written driver, such as an earlier version of a Windows Driver Model (WDM) driver.

Essentially, if there's a 3rd party driver believed to be at issue, enabling Driver Verifier will help flush out the rogue driver if it detects a violation.

Before enabling Driver Verifier, it is recommended to create a System Restore Point:

Vista - START | type rstrui - create a restore point
Windows 7 - START | type create | select "Create a Restore Point"
Windows 8 - Restore Point - Create in Windows 8

How to enable Driver Verifier:

Start > type "verifier" without the quotes > Select the following options -

1. Select - "Create custom settings (for code developers)"
2. Select - "Select individual settings from a full list"
3. Check the following bo... Read more

1 more replies
Answer Match 76.02%

it crashes all the time what is that?

==================================================
Dump File : Mini030812-01.dmp
Crash Time : 8/3/2012 1:13:43 πμ
Bug Check String : BAD_POOL_HEADER
Bug Check Code : 0x00000019
Parameter 1 : 0x00000020
Parameter 2 : 0x85226658
Parameter 3 : 0x85226808
Parameter 4 : 0x08360009
Caused By Driver : ndis.sys
Caused By Address : ndis.sys+d913
File Description : NDIS 6.0 wrapper driver
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.0.6002.18005 (lh_sp2rtm.090410-1830)
Processor : 32-bit
Crash Address : ntkrnlpa.exe+cdb3f
Stack Address 1 : ntkrnlpa.exe+ed184
Stack Address 2 : ndis.sys+3f58
Stack Address 3 : ndis.sys+3320
Computer Name :
Full Path : C:\Windows\Minidump\Mini030812-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 6002
Dump File Size : 141.760

A:blue screen of death please help me!!

If you would be kind enough to supply us the following information, we will be able to help.

1 more replies
Answer Match 76.02%

Alright I've got a horrible problem with a simple anwser.

An XP machine I'm working on has a 0x00000024 NTFS_FILE_SYSTEM error. The simple solution to this is to run CHKDSK /F

Problem being that I can't get to the point where I even have the option to run this.

The machine has no floppy drive and I'm open to all options.


Hopefully excluding wiping the machine

A:Blue Screen of Death

Can you boot into safe mode command prompt only by pressing F8 as Windows boots? Maybe there you can???

BMR777

7 more replies
Answer Match 76.02%

I bought this computer brand new and it keeps getting a BSOD. I took it back to the place i bought it and they told me it wasn't a hardware issue. I downloaded Bluescreenviewer to get the error codes. This is what was in the dump file:

Dump File : 040614-6052-01.dmp
Crash Time : 6/04/2014 4:16:29 PM
Bug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x000000d1
Parameter 1 : fffffa00`108330d0
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`00000001
Parameter 4 : fffff880`0440efda
Caused By Driver : USBPORT.SYS
Caused By Address : USBPORT.SYS+efda
File Description : USB 1.1 & 2.0 Port Driver
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : x64
Crash Address : ntoskrnl.exe+75bc0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\040614-6052-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 7601
Dump File Size : 313,840
Dump File Time : 6/04/2014 4:17:01 PM

Thank You,
Holliday
 

A:Blue screen of death

16 more replies
Answer Match 76.02%

My current set up is:
Windows XP Media Center Edition Service Pack 2
Its also a Dell Dimension E310.
Today I got a message from windows update saying that I could install "Windows XP service pack 3", I needed the updates so I updated it. So it asks me to restart my computer for the update to take effect. I do that, but when I restart my computer I can no longer enter windows. The load screen right before the password screen stalls then a blue screen pops up saying:
A Problem... check any new hardware software correctly installed...check for updates...if problems reoccur disable/remove new hardware.
Tech info: *** STOP: 0x000000FC
So I tried going into safe mode and removing the update but I can't enter into safe mode because before it gets to windows the blue screen appears. I have tried every available option in the advanced set up but each time I try to enter windows I get the BSOD.
I also changed my BOOT options so that the BIOS could run off the Disk drive and I could reinstall Windows with my Windows disk but that didn't work either.
Can anyone help me? I'm kinda computer stupid, I understand some stuff but I'm not advanced so please explain things.
Any help would be deeply appreciated.

A:Blue Screen Of Death

Hello

Take a look at the following article.

http://support.microsoft.com/kb/953356

hope it helps.

1 more replies
Answer Match 76.02%

08 and 24 anyone have any ideas?

A:Blue Screen Of Death

If you can still boot and connect download:http://www.gregorybraun.com/MSWinErr.html

2 more replies
Answer Match 76.02%

Hello guys, I have purchased 1 GB ram and installed it on my computer. Before that my computer was running with only 1 GB of ram. After installing this another 1 GB ram, My computer is showing Blue Screen Of Death 4-6 Times in the 1 Hour. I can't work properly. Please advise me. Sorry for my English. I hope you can understand.

A:About Blue Screen of death.

Remove the ram and find and upload the DMP files as describes below
We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
Please attach the DMP files to your next post not to post one.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

4 more replies
Answer Match 76.02%

Last few days I've been getting blue screened while playing a few of my video games, within 15 minutes of playing any game online i will crash =( first my screen begins to get all pixelated and the colors get all messed up then freezes and blue screens. Any help would be appreciated! its very frustrating

A:Blue Screen Of Death!! Please Help!

Welcome to TSF!

The BSOD is a 0x116, a video TDR problem, here's a nVidia statement on this problem, you would be well advised to check through this to see whether anything refers to your setup: http://forums.geforce.com/default/to...dmkm-stopped-/

You do have some old and/or problematic drivers that need uninstalling or updating:

Driver for an external drive, check and install updated drivers:
wdcsam64.sys Wed Apr 16 09:39:08 2008 (4805BB2C)
Western Digital SCSI Arcitecture Model (SAM) WDM driver 2008 driver version has known BSOD issues in Win7
http://www.carrona.org/drivers/driver.php?id= wdcsam64.sys

Razer gaming mouse drivers, look for updated versions:
vHidDev.sys Mon Dec 21 13:49:58 2009 (4B2F7D06)
Razer Gaming Device driver
http://www.carrona.org/drivers/driver.php?id= vHidDev.sys
dadder.sys Mon Apr 19 10:04:42 2010 (4BCC1CAA)
DeathAdder Mouse driver
http://www.carrona.org/drivers/driver.php?id= dadder.sys

DaemonTools driver, uninstall DaemonTools during testing:
dtsoftbus01.sys Fri Jan 13 13:45:46 2012 (4F10358A)
Daemon Tools driver Possible BSOD issues in Win7
http://www.carrona.org/drivers/driver.php?id= dtsoftbus01.sys

Your security software needs checking, running 2x active antivirus programs can lead to big problems. It looks like you have Avast! free and Kaspersky Internet Security 2013 installed, please uninstall 1 of them. Once uninstalled, ensure all remna... Read more

6 more replies
Answer Match 76.02%

Hi I'm running Windows XP Media Center on a Dell Dimension E310 with Pentium 4 and 512 mb of ram.

Whenever i start the computer normally (not in safe mode) the blue screen of death will show up. It gives the errors Driver IQRL 0x000000d1 (0xe2b14000, 0x00000002, 0x00000000, 0xaa4fbd50).

I also get the error message displaying on the desktop wlnapi.dll error. I have been getting this for a while and the computer had been working fine so I don't know if this has anything to do with it.

I have ran virus scans and they have come up with virus's which were supposedly deleted, i ran spyware doctor (full version), and it seemed to delete everything.

Can anyone help me?? I have no idea what to do and i need my computer back!!

A:Help with blue screen of death!

Let's do a quick scan before we move you to the XP forums-------------------------------Please download Malwarebytes Anti-Malware and save it to your desktop.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan. If an update is found, the program will automatically update itself. Press the OK button to close that box and continue. If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button. The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".Click OK to close the message box and continue with the removal process.Back at the main Scanner screen, c... Read more

1 more replies
Answer Match 76.02%

When I shutdown my Pc I often get the following error message 0x0000008E (0xC0000005, 0x804EDDF0, 0xA89A38B8[this number varies] 0x00000000). No driver or programmes are mentioned. I thought it might be my scanner driver so updated, but the last time it happened neither the scanner nor the printer were turned on. Have tried to look for help on the internet but am floundering. Hope someone can help.

Thanks, in advance

A:Please help - blue screen of death !!

Hi

Have you installed any new hardware just prior to the onset of this?

Any new memory modules?

Maybe worth running a test on your RAM memory just to rule it out.

http://www.snapfiles.com/get/memtest86.html

Have you run scans for malware and viruses?

Peter

19 more replies
Answer Match 76.02%

I have recently updated my computer from windows vista x64 to a windows 7 Home Premium x64 and have noticed that every so often ill get a Blue screen with these results

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF8800792C8D3
BCP3: FFFFF880035854B8
BCP4: FFFFF88003584D10
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\062412-31839-01.dmp
C:\Users\Customer\AppData\Local\Temp\WER-51199-0.sysdata.xml

If anyone can help me with this problem that would be great. ~bikerkid5

A:Blue Screen of death

We need the full crash reports. Please follow the http://www.sevenforums.com/crashes-d...tructions.html.

1 more replies
Answer Match 76.02%

I have a custom build computer that giving me the blue screen of death 5 min after I turned the computer on,i just paid some moron 150.00 to fix this issue but still happening.I had purchased all new parts for this computer just about.new hard drive mother board and memory cpu. new keyboard and mouse as well
am using my old graphics card which worked fine on my old computer with no issues.

this is the message I received today not sure this is much help.
Problem signature:



Problem Event Name: BlueScreen

OS Version: 6.1.7601.2.1.0.768.3

Locale ID: 1033

Additional information about the problem:



BCCode: 1e

BCP1: 0000000000000000

BCP2: 0000000000000000

BCP3: 0000000000000000

BCP4: 0000000000000000

OS Version: 6_1_7601

Service Pack: 1_0

Product: 768_1
Files that help describe the problem:



C:\Windows\Minidump\071913-21918-01.dmp

C:\Users\Owner\AppData\Local\Temp\WER-38625-0.sysdata.xml

 

A:blue screen of death

Hi cindyc1974, Welcome to TSG.

Please go to C:\Windows\Minidump and copy the minidump folder to the desktop. Compress it and upload it here. HOW TO: Click Go Advanced /Scroll down to Manage Attachments, Browse to the compressed file and upload.
 

1 more replies
Answer Match 76.02%

Hi,

My PC keeps crashing when im playing BF2 the game on line.

Do you need any more info?

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA80078A5028
BCP3: 00000000B6000000
BCP4: 0000000000200001
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Is Windows 7 . . . - x64 - It is an original installed OS on the system - Full retail version? - What is the age of system (hardware)?
Hardware is less than 2 years old
- What is the age of OS installation (have you re-installed the OS?)
3 monthes

Thanks for any help!

A:Blue screen of death

First, and I'm pretty sure this is the culprit, uninstall Gigabyte EasyTune6. After you are done installing, pull up the search dialog and search for GDRV.sys and ensure that it is also gone, if not, delete it.

Second, AVG can cause system instability. Please remove it and install Microsoft Security Essentials, at least until we are done with testing.

Third, Update your BIOS, you are on revision F1. BIOS updates often address stability issues. If you chose to update your BIOS, you do so at your own risk.

Fourth, if all else fails, Stop 0x124 - what it means and what to try if you need any help with the steps listed, please let us know. Do one step at a time and take note of system behavior.

Thanks,

James

3 more replies
Answer Match 76.02%

This is my dumpfile..could you check it?
 

A:Blue screen of death

I've split your post off -- always start new threads for problems rather than piggybacking others.

The zip file is defective -- and contained no data

Try that again.
 

1 more replies
Answer Match 76.02%

I was playing a game online and left it on then watched a bit of TV, when I went back, I had a BSOD, so I rebooted but it kept doing it, I got told my vid card was no good any more, plus found a raised cap on my board, bought new board, cpu, ram, vid card & a fresh install of win 7 . . .

all has been well until today, it BSOD again so rebooted had a look around they say that the file that was making error was a ram related issue, so I pulled my 2 old sticks & rebooted, it just BSOD me again, im so ticked at it, virtually new comp & it pulling this nonsense . . .

I installed a prog called " Blue Screen View " ive found some info and am going to list it & see if any of you good people maybe able to assist me in this matter . . .

ntoskrnl.exe is the file, caused by address ntoskrnl.exe+73c40 & file version is-6.1.7601.19045 (win7spl-gdr.151019-1254

to me its gobbly gook, if any one can assist id be so very grateful . . .

thank you.

Peace & Blessings . . .

A:Blue Screen Of Death . . .

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

1 more replies
Answer Match 76.02%

I just installed vista home premium and when i try to run the speech recognition program i click on it and it comes up with a blue screen with random white lines and then the computer restarts itself. This also happens to me when I click try and launch counter strike 1.6 from steam. Any thing i can do?
 

A:blue screen of death

12 more replies
Answer Match 76.02%

BSOD playing Microsoft flight simulator and other every day functions





I did over 9 hour MEMTEst but I dont see when it was saved to or where to get the info but it showed no errors


Hope I did all the right things for this post if you need anything else let me know I New to all this



I7-5820K S/2011 - V3. INTEL
ASUS X99,S2011v3,i7,DDR4,PCIe/RD/GL
Kingston Fury 2400 16GB
Western Digital 1TB 7200RPM SATA Black
240GB Kingston Fury SSD
ASUS GTX 970 4GB
CM NEPTON 120XL CPU WATER COOLING (Going to have to use this one, Case restrictions)

More replies
Answer Match 76.02%

Ok, I know very little about computers. I have this stupid Dell laptop that is always giving me problems. Is Dell supposed to be good? Cuz it's not! Anyway, when I tried to turn it on yesterday, I couldn't get the power to come on. I left it alone for a while and then I turned it on again. It finally came up with a black screen that said something like there was a power failure the last time windows closed or something. It asked me if I wanted to boot up normally or in safe mode or the last known good settings. So I picked normal. Then it went to the blue screen with this error:

STOP: c0000218 Registry File Failure
The registry cannot load the hive (file)\system root\system32\config\software
or it's log or alternate
It is corrupt, absent or not writable
Beginning dump of physical memory
Physical memory dump complete
Contact your system administrator or tech support group for further assistance

uhhh....I'm not really computer saavy, but.... Physical memory dump? That can't be good. Can anyone tell me what I should do? If my computer is toast, is it possible to get files off my hard drive? Please help!
 

A:Oh no, It's the blue screen of death

It's a bad error. It is either soved by doing a windows "reinstall" -- not necessarily a "clean" install -- or by using the recovery console to do a 3 part recovery. If you do a reinstall first -- this cannot be done.

If you do this improperly -- you will lose data if you still need to do a reinstall. If it does not work and you want to do a reinstall -- you must copy back the registry hives you backed up to their original "system" folder.

Here are the directions:

USING THE RECOVERY CONSOLE TO ACCESS SYSTEM RESTORE
If you do not have an XP CD download cmdcon.cab from Elvandil's post here: http://forums.techguy.org:80/t395729&highlight=recovery+console.html

Unzip and burn the cmdcon.iso file to CD. With Nero or Roxio you should only need to "open" the file and it will start the burner's ISO burning program.

DeepBurner can also be used to burn ISO files, I recommend the &#8220;portable&#8221; version:

http://www.deepburner.com/?r=download
Once that is done, you need to boot with either that or the Home XP CD to the Recovery Console. You may need to ensure that the CD drive is the first boot drive in the BIOS setup if it just boots to the same screen. Setup is accessed by looking for the key to press on the first data you see on the screen -- often F2

Directions are given here:

http://attachments.techguy.org/attachment.php?attachmentid=62075

There are several things to note about this operation.

1 ... Read more

2 more replies
Answer Match 76.02%

i just came home from being outside and my sisters were just finished watching free full shows on nick.com... i popped in the sims 2 DVD and my first blue screen of death popped up....

here is the exact message:

A problem has been detected and windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing the video adapters.

Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as cahing or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select Safe Mode.

Technical information:

*** STOP: 0x0000008E (0x0000005, 0x804E057d, 0xf3D8A8C8, 0x00000000)

Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for futher assistance.

anybody can help? i really appreciate it as i dont wanna see this screen again.

A:MY FIRST BLUE SCREEN OF DEATH

Hi these stop errors that have come there is no info on them but if you go to http://support.microsoft.com/ and look for knowledge base read what you have to do type those nimbers in and it should flash up on screen what caused it do all the ones starting with 0x000.

5 more replies
Answer Match 76.02%

I have been trying to troubleshoot my desktop for a few months now with Dell and they've basically told me "we've done everything we can, sorry." I turn to you in hopes that you might be able to help with the problems.

Relatively, I have a brand new computer (less than a year old). It's a Dell Inspiron 518 and I'm running Vista SP1 on it.

The computer randomly will freeze up and/or shut down on me for no good reason. Sometimes, it has the blue screen, other times, it just freezes.

This is the most recent blue screen error:

STOP: 0x000000F4 (0x00000003, 0x879DFD90, 0x879DFEDC, 0x81E90430)

Anyone have any ideas/suggestions?

A:Blue Screen of Death

hi you could have a look here http://support.microsoft.com/default...b;en-us;330100 and this can also help http://forums.majorgeeks.com/showthread.php?t=35246

1 more replies
Answer Match 76.02%

Hi,

*** stop: 0X0000008E (0X80000004, 0X806ECAE1, 0XBA237708, 0X00000000

Only started happening couple days ago for no reason at all, no pc updates, nothing newly installed, really annoying me due to its frequency. Please help.

Also note that it does not always result in a blue screen sometimes its just crashing stuff with that dont send message.
 

A:Blue screen of death with the following

Hi, some reasons for blue screens
New hardware - software installed.
Device driver - Video driver - corrupted - faulty.
Faulty Ram - Overheating - Dying hard drive etc.

http://support.microsoft.com/kb/945658
======
Run a Mem Test.
You may need to d/load the following using a working computer.
http://www.memtest.org/
Scroll down to 'Download (Pre-built & ISOs)'
'Download - Pre-Compiled Bootable ISO (.zip)'

Download the ISO and then burn the ISO to a Cd.
Start the Pc using the Cd and run the memory test overnight or for at least 8 passes.

It is best to run a full scan on individual Ram sticks if you can.
Or run the test but if any errors are shown - then remove all sticks of Ram and test each Ram stick one at a time.

Guide to using Memtest86+
http://www.bleepingcomputer.com/forums/topic207910.html
======
Hard drive test.
SeaTools for DOS tutorial - ISO to CD
http://knowledge.seagate.com/articles/en_US/FAQ/201271en
======
Overheating.
HWMonitor
http://www.cpuid.com/softwares/hwmonitor.html
======
If you can check Device Manager
Click Start button >run > type
devmgmt.msc

Check for any yellow exclamation marks.
Drivers may need updating - always go to the manufacturers website for any needed drivers.
 

1 more replies
Answer Match 76.02%

Hi, erm, i was just sitting at my computer, playing guitar, not really doing much on my computer, and all of a sudden this blue screen came up saying alot of stuff, and i was just wondering, what caused this to happen? And am i supposed to do something about this? Thanks, and i sorry for my lack of knowledge on the subject.

A:Blue screen of death?

Run your Virus Scanner and Spyware Scanner to check for Viruses or Spyware. Then if all comes back clean, I would do a System File Checker Scan. The System File Checker Scan is a utility from Microsoft that scans the critical system files on your computer and checks to make sure that those files are intact and in their original version (as they should be)... if they are not in their original version, then it will replace them with the proper file. You should already have System File Checker on your Computer (it is a standard XP utility)To run System File Checker you will need your Windows Installation disk, then youClick START then RUNThen Type sfc /scannowHope that helps!

18 more replies
Answer Match 76.02%

My XP computer stopped with a BSOD, but I could still get into Safe mode. After getting there twice and removing an update that I thought caused the problem, I could still not get into normal start of Windows, so I decided to do a repair installation by using my original disc. After going through the procedure, and when windows tried to restart, the BSOD comes back again. I already tried this twice and I don't know what to do anymore. Can you please help???
Please note that I am sending you this message from another machine.
 

A:Blue SCREEN OF DEATH

What's the brand name and model name and model number of that computer?

------------------------------------------------------------

If a repair of Windows XP isn't working and it's still displaying a BSOD, Windows XP may be too corrupted or damaged and may need a clean reinstall.

There may also be a hardware issue that we're not aware of.

------------------------------------------------------------
 

2 more replies
Answer Match 76.02%

One of my computers got a blue screen of death last night, it said fatal error and said it was doing memory dump, I powered down and back up a couple of times and it said on black screen no OS found. After a few more times it came back after thinking about it for a long time. Its back up right now but the end could be near. I thought the hard drive was making some strange sounds but could not pin point it, this all happened in about 3 minutes. With this little it of information would you say that its probably the hard drive going out? It has been running a little slow at times like when you type the letters might be a tad bit behind showing up as your typing along, this made me think maybe the processor was going out. Right now its running fine and no problems, but I thought I would just prepare for what's coming.

Specs

6 or 7 years old
Compaq 5000
AMD Athlon 1700
512 ram
XP Pro
 

A:Blue Screen Of Death

6 more replies
Answer Match 76.02%

I get a blue screen of death alot while gaming if you could help it would be great here is the error

Dump File : 101713-9079-01.dmp
Crash Time : 17/10/2013 9:40:24 p.m.
Bug Check String :
Bug Check Code : 0x00000124
Parameter 1 : 00000000`00000000
Parameter 2 : fffffa80`07a49028
Parameter 3 : 00000000`bf800000
Parameter 4 : 00000000`00000124
Caused By Driver : hal.dll
Caused By Address : hal.dll+12a3b
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+75bc0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\101713-9079-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 7601
Dump File Size : 292,760
Dump File Time : 17/10/2013 9:41:10 p.m.

computer:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 8
RAM: 8141 Mb
Graphics Card: NVIDIA GeForce GTX 770, -2048 Mb
Hard Drives: C: Total - 114370 MB, Free - 2555 MB; E: Total - 953866 MB, Free - 849605 MB;
Motherboard: Gigabyte Technology Co., Ltd., Z87M-D3H
Antivirus: AVG AntiVirus Free Edition 2014, Updated and Enabled
 

More replies
Answer Match 76.02%

hey can anyone please help me. first of all we were having a game and there was a freeze 2 secs and became very slow then froze and gave me the blue screen.

Thank you
 

A:Blue screen of death please help

The BSOD is usally caused by routine hardware failure, but not always... The most common is memory, but it can be as simple as an unused floppy drive, any device in a PCI slot that has decided to fail or has had a driver failure. It can be a power supply failure or a worn CPU cooler fan... or any other powered device that requires driver software.
Now that you have ruled out memory, rule out CMOS batter, then each of the other powered conmponents.
You can begin by going to Start->Control Panel->System->Hardware->Device Manager and look for any yellow or red flags. Replace by upgrading any item so marked.
 

2 more replies
Answer Match 76.02%

Hi! My pc runs Windows XP Home Edition (service pack 3). Its CPU is an Intel Pentium M 740, 1.73 Ghz.
Today I installed BitDefender antivirus (32 bit) and it removed some virus and other malware that I had on the PC.
A while ago it asked to install new updates and so it did. After that it asked to restart and I let it do so.
Now, it keeps restarting all over and over again. It appear the brand of the pc and then it shows a black screen asking to run Windows normally. When I click "enter" it starts to appear the Windows logo but then it shows the BSOD very quickly, it shuts down then it restarts again.
I already tried running the pc in safe mode but it keeps restarting.
I also tried selecting an option in the safe mode which is "deactivate automatic restart in case of system failure" and it shows the BSOD completely and it says the usual plus to execute CHKDSK /F and the technical info is: ***STOP: 0x0000007B (0xBA4CF528, 0xC0000034, 0x00000000, 0x00000000)
 

A:Blue Screen Of DEath

8 more replies
Answer Match 76.02%

Hello,

I have a friends computer, it all started when i just had to install the comodo firewall and antivirus, his pc was fine, until i did that stupid software installation, then the comodo firewall started telling me there was viruses on there, so i deleted them all, after that, i updated the spybot, after a reboot, thats when a weird error message said something like could not read memory or something like that, then rebooted again, and blue screen of death, so i tried to uninstall comodo, spybot, and reinstall the video drivers, good news is, now it comes up to login to which profile, click on any profile, after 5 minutes, it will go blue screen and reboot, i looked at the event log in system and said something like bugfix or something about it encountered a bug and need to be rebooted the pc, something like that, looked it up, and checked all hardware, I DONT KNOW WHAT TO DO NOW ANY IDEAS!!! should i just do a repair on windows XP pro since i have the CD? if so, will my friend lose his programs and files if i do a repair, his Windows is SP3, and my repair cd is SP2, will it be fine (the files and programs)?

friends PC spec:
MS-7376
500w power supply
320gig sata seagate
nvideo geforce 6800 gt
win xp pro sp3

tried to install comodo firewall+antivirus version: 3.8.65951.477

PLEASE ANY IDEAS ANYTHING, ohh i also go into safe mode, and that works fine, but boot up to regular windows blue screens after 5 minutes, tried to go to msconfig, disable everything on... Read more

A:blue screen of death!!

Quote:





Originally Posted by Siten0308


Hello,

I have a friends computer, it all started when i just had to install the comodo firewall and antivirus, his pc was fine, until i did that stupid software installation, then the comodo firewall started telling me there was viruses on there, so i deleted them all, after that, i updated the spybot, after a reboot, thats when a weird error message said something like could not read memory or something like that, then rebooted again, and blue screen of death, so i tried to uninstall comodo, spybot, and reinstall the video drivers, good news is, now it comes up to login to which profile, click on any profile, after 5 minutes, it will go blue screen and reboot, i looked at the event log in system and said something like bugfix or something about it encountered a bug and need to be rebooted the pc, something like that, looked it up, and checked all hardware, I DONT KNOW WHAT TO DO NOW ANY IDEAS!!! should i just do a repair on windows XP pro since i have the CD? if so, will my friend lose his programs and files if i do a repair, his Windows is SP3, and my repair cd is SP2, will it be fine (the files and programs)?

friends PC spec:
MS-7376
500w power supply
320gig sata seagate
nvideo geforce 6800 gt
win xp pro sp3

tried to install comodo firewall+antivirus version: 3.8.65951.477

PLEASE ANY IDEAS ANYTHING, ohh i also go into safe mode, and that works fine, but boot up to regular w... Read more

4 more replies
Answer Match 76.02%

Hey guys

I know there is a correct way to post about blue screen crashes and I would like to follow the procedure

but unfortunately it doesnt seem to be working for me. I have followed the steps in the link below to the tee (twice) and both times it does not produce the Windows_NT6_BSOD_jcgriff2 folder.

http://www.sevenforums.com/crashes-d...tructions.html

does anyone konw why this is happening?

would it be ok if i copy and pasted the error codes I have been receiving from the blue screen crash in a post for everyones help?

please let me know

thanks

A:Help Please - Blue Screen of death

At a minimum, please upload the memory dump files and MSINFO32 report:





Quote:
Upload Dump Files:
Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
Left click on the first minidump file.
Hold down the "Shift" key and left click on the last minidump file.
Right click on the blue highlighted area and select "Send to"
Select "Compressed (zipped) folder" and note where the folder is saved.
Upload that .zip file with your next post.

If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there. If it still won't let you zip them up, post back for further advice.

If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP. If you find it, zip it up and upload it to a free file hosting service . I recommend Windows Live SkyDrive - http://skydrive.live.com or another free, file-hosting service. Then post the link to it in your topic so that we can download it.

Then, follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file): Set MiniDump

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.

If you're having difficulties with the format, please open... Read more

1 more replies