Tech Problem Aggregator

Doesn't work video driver

Q: Doesn't work video driver

Dear Sir,
yesterday I installed windows 7 home premium x64
Before installing nvidia driver it runs well with windows default video performace (800x600).
But after installing nvidia driver, it doesn't work perfectly
MY problems after installing nvidia driver
1. It runs well before showing the start up window (welcome window where I have to entry my password)
2. But when I run the windows in safe mode it works perfectly
3. You can say that it is for driver problem / driver software problem. But I used the driver in the previous windows 7 home premium x64
If you need anything related with my problem, then comment in down
Thanks.

A: Doesn't work video driver

Hi rx123yz. Your issue sounds like that Windows have installed its own drivers over new ones that you installed. Remove all the old drivers and use Driver Sweeper. This little software removes all the bits of the old drivers. Below is the link to download the S/W. Before uninstalling the old drivers, download the latest drivers for your card from Sevenforums or from Nvidia site and install them after uninstalling and sweeping off the old drivers with driver sweeper.

Driver Sweeper Download

Keep us posted.

3 more replies
Answer Match 59.64%

I recently bought a C.D. and wanted to upload it to iTunes and put it on my iPod, but it would not load. I thought, "Oh, it must have a security thing." So I tried it in a C.D. player. It worked. I tried once more with the computer, and it failed. The driver shows up. But there is no C.D. I even tried another C.D. to see if it was just the one I had bought, but it wasn't. Any ideas?

A:My CD Driver doesn't want to work.

Hi lol_alex_lol30 and welcome to TSF

I can help you with some basics, but you will need to check further to get all the data you need, as I don't upload to iTunes.

I'm assuming you bought an audio CD. I'm also assuming that iTunes would like to see MP3 audio files....You will need to find that out. This though, is true. When you burn an audio CD from music files, those files are most likely in the form of WAV on your harddrive. They are burned onto the CD with a .cda extension and are named track 1, track 2, etc. The song names are not shown on the CD if you view it with Windows Explorer.

Extracting songs from an audio CD to harddrive is called ripping the song. Songs end up on your harddrive in the form of "songname.wav". songname will be Track1, Track2, etc. and you will have to rename each to have the actual song title associated with the song. WAV files are quite large and about 24 songs is the maxium that you can burn onto an audio CD.

Mpeg level 3 (MP3) is a compression specification that can be used to make much smaller audio files. A 20,000,000 (20 meg) WAV file will compress into a MP3 file that is about 2 meg or less. A file that is 10 to 11 times smaller than the WAV file. I'm sure you can appreciate the fact that small files upload much faster than very large ones. Also you can put about 240 mp3 files on a CD, but only about 24 wav files. You could also appreciate that your ear can't tell the difference between the sound of... Read more

4 more replies
Answer Match 59.22%

Hi,
I?ve got some problem with my W-LAN device. Recently I?ve got a strange feeling about it because some things didn?t work correctly, so I decided to reinstall the driver. It didn?t work directly (I don?t know why), so I tried to uninstall it first, to install it again. Now I got this message:

This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

An update for the latest driver was useless because I already got the latest one. I tried both installing it from the device manager several times, which failed everytime with this message to come, and by the driver setup (there is a folder available on my computer with all drivers installed on it), which seemed not to have any effect, although it said "Installation complete". Has anyone a solution for me?
I?m going to reinstall my Windows soon, but it?ll take some weeks to that. But until that, I need my W-LAN to work again!
I?ve got Win 7 Home Premium 32bit, my W-LAN device is a Broadcom 802.11g, my notebook is a Lenovo G550.

Thanks for any help, Bennington

A:Reinstallation of W-LAN driver doesn't work

First go into Device Manager (right click on Computer and choose properties, then Device Manager), then go ahead and delete the Broadcom device under Network adapters. Then try and install only the most recent Lenovo supplied driver for your laptop model. Let us know how that goes...

6 more replies
Answer Match 59.22%

hello

please anyone know how to make this driver work under windows-7 64-bit or vista>

it works fine under 32-bit>

i think it's easy to edit this driver to work under 64-bit or maybe there is another solution that i don't know>

thanks in advance>

A:Psx Driver for ps controller doesn't work

Hello TheEvil

You might want to checkout the Windows 7 Forums for all things Windows 7

Peace

1 more replies
Answer Match 59.22%

Every time I start up the computer, my video card stops working. When I look in Device Manager, it shows the video card there, but with an exclamation mark by it which means it's in a 'problem state'. I can fix it by reinstalling the driver, but I have to do this every time I turn it on! How do I make it work every time?
 

A:Driver doesn't work on startup???

8 more replies
Answer Match 59.22%

Hello,

In Windows 7, I am trying to figure out if I have any faulty drivers. I have been having BSODs for a while, and I've removed RAM etc. So the next step was to test drivers.

But I can't run Driver Verifier. No matter which drivers I select, the Driver Verifier causes a blue screen as the windows 7 logo starts to come together. I have to clear the settings in Safe mode to get it back.

Is there any way to fix this, or any other way to check my drivers?

(My most recent BSODs have said caused by dxgmms1.sys and tcpip.sys -- lots of IRQL_not_less_or_equal and system_thread_exception_not_handled.)

A:Driver Verifier Doesn't Work...

The purpose of Driver Verifier is to cause a Blue Screen of Death.
Analysis of the memory dump files will then (if it's worked) let the analyst know what driver caused it.

You'll know this because there will be a Driver Verifier Enabled memory dump.

FWIW - I had a system at work today that would spit out the IRQL error messages, but not the Driver Verifier Enabled error messages. I finally enabled all settings in Driver Verifier and then rebooted. An hour and a half later the system was still booting with the Windows 7 splash screen.

The point here is that the settings that you use in Driver Verifier are critical - and are determined by the type of BSOD events you are getting (for example, if you have BAD_POOL_CALLER errors, then you want to enable the POOL checking options in Driver Verifier).

Please zip up the contents of the C:\Windows\Minidump directory and upload/attach the .zip file to your next post.

19 more replies
Answer Match 59.22%

Hi =)

the foxnews video player hasn't worked in my computer since late november 2009. Around that time, foxnews changed their old video player to the new one they have now.

I have the latest version of adobe flash player. Tried uninstalling and re-installing with no luck. I found a thread in another site that seems to have resolved the issue, but the posters there are talking in tech terms.

Has someone solved that problem, or in the alternative, can someone translate the solution in the other website in plain English so that an average non-tech savvy person can take the steps to resolve it?

thx
http://www.keyongtech.com/5480792-no-video-on-foxnews-com
 

A:video player doesn't work FN

all those views and no replies....
 

2 more replies
Answer Match 59.22%

deleted - wrong thread.
 

A:new video card doesn't work

OK, I put this in your own thread AND edited out your email addy. Replying to a guide is not going to get you any help. They are to read and use however not to reply to. Next posting your email on the forum is asking to be spammed.
 

3 more replies
Answer Match 59.22%

Hi,
for some reason, when i click the play all videos button in explorer nothing happens. It used to open all files in media player but now nothing at all happens. wont even play selected items. If i select all the videos and press enter it works however so why won't it work properly? This is the third time I've posted about this problem can someone please help!

Help please!
 

A:Play all video doesn't work

bump
 

2 more replies
Answer Match 59.22%

Hello,

I am trying to watch video from this webpage:

http://babeczkaa.blox.pl/2011/05/mieszkac-w-Barcelonie.html

but it doesn't work on my PC. Any idea why ?

Regards,

Emil
 

A:Webpage video doesn't work

15 more replies
Answer Match 59.22%

I installed win 2k pro and no matter what I try it always installs some default vortex legacy drivers. My card is a montego a3d xstream. 90% of my games don.t work........help
 

A:my video card doesn't work with win 2k pro HELP.

check on microsofts website to see if that vid card is compatible. if its not then u need to either get another vid card or downgrade to 98 or ME or see if XP supports it but if 2000 doesnt then XP probably wont either. you can also check the manufacturers website to see if they have updated drivers. just make sure u search high and low for drivers before u give up
 

3 more replies
Answer Match 59.22%

I have a computer with Windows XP that I bought in 2001. It has intel D845WN Motherboard, and 1.12 gb of RAM, and I think the video card is radeon 7000. I want to watch the one of the videos on this page: http://www.24-7agtv.com/Joomla/index.php?o...=1&Itemid=1 The image is very distorted (short and fat). What is my problem?

A:Why doesn't this video work on my computer?

It works OK for me. Are you allowing the Windows Media Player addon?

5 more replies
Answer Match 59.22%

my video capture device doesn't work. it doesn't show any picture. why?
 

A:my video grabber doesn't work. help.

Can we have a bit more of the ball to play with?

What exactly are you trying to do? What hardware are you using? What operating system do you have? What software are you using for the capture?

Video capture is simply once everything is set up correctly but patience is required.

I use a WinFast TV2000XP card along with PowerVCR and the supplied software.
 

1 more replies
Answer Match 59.22%

Hi,
for some reason, when i click the play all videos button in explorer nothing happens. It used to open all files in media player but now nothing at all happens. wont even play selected items. If i select all the videos and press enter it works however so why won't it work properly?

Help please!
 

More replies
Answer Match 59.22%

the videos I watch stop and then play again the streaming the video doesn't work email my a link at email address <email removed by moderator - etaf>
 

A:streaming the video doesn't work

6 more replies
Answer Match 59.22%

hey guys. I'm having problems streaming videos on the mtv, cmt and vh1 websites. I click on the link to watch the video and a new window pops up. It plays a couple of ads no problem however after finishing the ads it just stops. On the mtv site all I get after the ads is a black area where the video should be and within the embedded WMP it just says "ready", nothing happens. Please help i've been having this problem for as long as I can remember and really wanna get it sorted. oh btw, it's exactly the same with firefox and ie so i don't think it's a browser problem.

many thanks in advance
 

More replies
Answer Match 59.22%

Hi, I have Aopen MX4LS motherboard with Celeron 2GHz CPU. When I turn it on cpu fan starts, led 1 light goes on, graphics card fan starts. Than I get a long beep repeating and boot led flashes 2 long, 1 short, 5 long flashes, 1 short, than just long flashes. I tried without any RAM and got same beep and flashes. Also I cant get anything to display on the monitor. I would connect it to onboard vga, the 'no signal' message disappears on screen than nothing as if the computer isn't even on. Same results with different video cards. After a min of this I checked heatsink and cpu, both were cool. Can you help please?

Phoenix D686 BIOS
Aopen 300W PSU
 

A:Video doesn't work and possible other problems

Look elsewhere on TechSpot for the fine report on beep codes that covers most of them. It is by a TechSpot member called Tipstir, if I am not mistaken.
 

4 more replies
Answer Match 59.22%

I recently purchased a new Chaintech GeForce 7300GT videocard to upgrade my computer. After following the directions my display is completely black through POST. Then the monitor shuts down. Any suggestions?

A:Video Card Doesn't Seem To Work

A friend of mine had a similar problem.
Oddly enough after installing the card a second time it worked flawlessly...!
Sorry... cant give more help (only symphathies)!

2 more replies
Answer Match 59.22%

I'm running Windows XP on an Asus A2500H laptop. I bought an s-video cable to plug it into my TV.

In the display properties, the number 2 display is greyed out. If I right click on it and click "attach" it lights up and a check box below called "extend display to this monitor" is un-greyed and selected. After clicking apply everything reverts back to how it was, display 2 greyed out, and the check box unchecked and greyed out.

Please help me with this, I was really looking forward to using my laptop on my TV.

Thanks.
 

A:S-Video output doesn't work :(

double check that the TV is looking for S-Video input and not the default.
 

1 more replies
Answer Match 59.22%

ok, so, I had a bunch of spyware on my computer and I decided too get rid of it, got 2 nice programs, but after I ran them, (I'm not good with computers so anything that came up, boom deleted, for I thought it was spyware) Soo, anyway! After that I can't play stepmania, ((which is a game that uses music btw)) It says, "Couldn't find a sound driver that works" I can't play any music either, on wmp (media player) It just skips all the songs untill they are all red... Oh, and anything doesn't play sound, I guess I should stop adding on, you guys get the picture, so I'll hit post now... Computer --->? :knock:
Me ^^^
 

A:Sound and video doesn't work.

Hello and welcome to Techspot.

Reinstall your sound drivers, that should sort it.

Regards Howard
 

17 more replies
Answer Match 58.38%

Hey guys,

Yesterday I formatted and reinstalled windows Vista on my new Dell Inspiron 1720 laptop. I've gone through the whole driver CD, installed everything there, but wireless still doesn't work! It doesn't find any networks. I realize that the drivers CD just has the default 1720 drivers, so some things might be different (for example, the default video card is 8400, but mine has an 8600, and the driver for that isn't on the CD). Perhaps I require a different wireless driver?

If that is the case, how do I know which one I have and where to get the propoer driver for it?

Any help is appreciated!

Thank you.
 

A:Solved: Wireless Doesn't Work! What driver do I need?

http://support.dell.com/support/dow...D=INS_PNT_PM_1720&os=WLH&osl=en&catid=&impid=
 

3 more replies
Answer Match 58.38%

Hello. I have Radeon HD 3850 AGP and Win7, and I tried to do almost everything ...
I installed 9.12 drivers, 9.12 drivers with adding CL_91526 from the topic above), 9.11 drivers, 9.11 drivers with Hotfix (ATI), 9.11 drivers with adding CL_91526, manual driver install by right click . Absolutely no changes and everytime the same ... During and after installing (before reboot) no changes in Device Manager, having "ATI Radeon 3850 " (or "ATI Radeon 3800 series" or something like that...) with yellow triangle and Microsoft Co. driver. And after reboot no changes with it, an error message with something like "Driver didn't install correctly, please install proper driver" ( though in ATI install log you can see that everything was installed succesfully). So after reboot I still see my VGA like "ATI Radeon 3800 series" with Microsoft driver and of course no changes in monitor resolution and all. If I try to delete microsoft driver (and device), and then install radeon drivers , during installation I absolutely just don't have any VGA in Device manager. And after reboot Win7 "finds" VGA and install from internet microsoft driver, so I can see "ATI Radeon HD 3850 (Microsoft Corporation WDDM 1.1)" in Device Manager.

I think that radeon drivers don't install (or don't install correctly), and Win7 ignores (or doesn't see) them.

Please help... Maybe I do something wrong ?...

(Asus P4S8X motherboard (latest bios), P4... Read more

A:Radeon HD 3850 AGP, driver doesn't work.

Welcome to seven forums AngieM: Unfortunately you have a pretty old system a socket 478 board I would suggest first off to use 32 git seven and try the method in this thread to try and get your driver to install. Not every systems hardware is up to running windows seven Install AGP Drivers for HD 3850, 3650, 2400 PRO This is the only method I know of that will install the agp driver, Are you sure you are following the directions EXACTLY the way they are written and installing form device manager? If so then it is possible your system may just be to outdated to run win 7 Sorry to tell you but?. Fabe I wanted to add you might want to uninstall the driver then use driver sweeper to make sure all remnants of the previous driver are removerd before trying again http://www.guru3d.com/category/driversweeper/

9 more replies
Answer Match 58.38%

I decided it was about time to upgrade my slow computer for games, especially since it had built in graphics.

I ordered a HIS Radeon 4670 card, based on reviews it was good for my budget and most of the reviews were positive.

First, I upgraded my slow sempron 3400+ to a 5600 x2, about the fastest cpu I can use with my motherboard with low wattage in-mind (I think it's 65 watt). This seemed to install fine, but the video card did not apparently. (unless it doesn't work with my montor?)

All I know is, I plugged the video card in the PCIE slot and get no output signal to my monitor with it. It is an older CRT monitor (Samsung SyncMaster 955df) and I never read they wouldn't work with newer cards, but I guess it's possible?

Anyway, the card doesn't have the VGA pin for my monitor, but it came with an adapter.
When I hook up the adapter there are 2 slots that it fits into and neither one will display a video signal, when I boot my computer. I tried uninstalling the built in graphics drivers and also disabling the on-board graphics in device manager. Neither one has fixed my problem. I've tried to contact customer support but there is no number on the web site except for one in China!

I noticed the fan came on on the card, but I'm still worried because XP doesn't even seem to detect it. I hope I didn't get a broken card, but if it is I need to hurry up and send it back. Any advice?
 

A:Solved: New Video Card doesn't seem to work

16 more replies
Answer Match 58.38%

Hi

I Have This problem Since Vista Sp1 64-bit also That Video Thumbnails at Vista SP2 64-bit doesn't work

at windows 7 and vista 32-bit every thing is ok but at 64-bit i get that problem

is there any way to fix this

A:Video Thumbnails at Vista SP2 64-bit doesn't work

Import avi fixer from below
File association fixes for Windows Vista

+ restart

If you have also the same trouble with other extensions import fix for them also

3 more replies
Answer Match 57.96%

Hi there!
I just got my new Asus Vivobook s400ca running Win8.1, a few weeks ago.
It really runs great, although I managed to find one problem. Since this is a laptop without a detachable screen,
I didn't really find any good reason for having the touch keyboard toolbar () in my task bar, since I was pretty sure I'd never need it. So I disabled the keyboard, which worked out fine but the toolbar was still there.

I then went on to try to remove it by using one of EightForum's .reg files for that purpose.

This did, as described, remove the toolbar, but apparantly it stopped the mouse pad driver as well, even though the mouse pad itself basically works. (no gestures or scrolling though.)

As you can see here, There's no driver running.


And in the ASUS hub, it's also impossible to turn it on. It just keeps saying it's off.

So I decided to use another .reg file that I found with the initial one, that should basically just rollback the effect that the other one had, but to no avail.

It just made the toolbar come back.
So I don't really know where to go from here. Any suggestions?
Also, if there is anyone who knows what to do about that toolbar, please do tell! [:

Thanks in advance! [:

More replies
Answer Match 57.96%

The Stylus Pro 7600 is now a really old printer, the last supported driver was for XP but it worked in Windows 7 and I believe to some extent in 8 although I never did try it.

It s a really good reliable large format printer though and very affordable in parts, ink and the second-hand purchase price.

However alas Windows 10 doesn't like it, I did the upgrade to 10 (and then the downgrade) from windows 7 but it will not see the driver it sees the device but calls it a USB high speed device or something like that and compatibility mode didn't seem to help.

So unless there is a clever work around and I'd love that to happen I'm stuck on Windows 7 for the duration.

Suggestions welcome.

A:Epson Stylus pro 7600 - Driver doesn't work

No cleverness here, and I don't have such a printer, but...

Have you tried the drivers for Vista?

Epson Stylus Pro 7600 - Photographic Dye Ink, Drivers & Downloads - Technical Support - Epson America, Inc.

These are for the dye-based version. I didn't look to see whether the Ultrachrome based one uses different drivers.

(There are also 32 bit Windows.) If they don't want to install, you could try right clicking on the installer and running the Troubleshoot Compatibility tool.

Good luck.

3 more replies
Answer Match 57.96%

My boss bought a new HP tower after our old one ran out of space. I plugged it in and everything worked until I realised the scanner didn't work. I downloaded a driver but it still didnt activate the scanner. So I looked at the driver repair discs that came with the tower. I installed that thinking it would repair the scanner driver and when I logged back in, the keyboard or mouse USB didnt work. I hope I didn't screw up anything. The keyboard works in BIOS. My boss doesn't know and I would like to get this repaired without bringing anyone in. HELP! Im on Windows 7.

More replies
Answer Match 57.96%

Yesterday I reinstalled Windows 7 on my notebook PC. I had to use a Microsoft installation disk because unfortunately, serious errors resulted after I installed from the HP recovery program. Consequently the HP drivers that were installed automatically with the recovery program weren't installed on my system. I had to install several of them from the HP support site. I got everything to work except for the Touch volume control, or the Volume Scroll Zone as referred to by HP in the service guide. This is the device located just above the keyboard that increases or decreases speaker volume when you drag you finger on it. I installed the Quick Launch button driver but that only applied to the mouse and pointer touchpad. I looked at the devices listed in my startup configuration. I saw the synaptics pointing device and the HP quick launch buttons listed. So is the IDT PC audio driver.  What am I missing? Where I can I find it to activate the touch volume control?

A:Touch volume control doesn't work on dv6, looking for driver

@accordeoniste Try these. http://ftp.hp.com/pub/softpaq/sp48001-48500/sp48425.exe http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46731.exe REO

2 more replies
Answer Match 57.96%

Sorry if I am posting in the wrong forum, I'm not sure if this should be in graphics cards or drivers...or somewhere else entirely.

I have an Intel 845GL Chipset....I can't find a driver to make it work using Vista.

Do I have to buy a new graphic card? Or am I missing something easy, or is there a work around?

A:Work around? Intel doesn't supply a vista driver.

Ok, I am resolved to replacing my video card.

I've never replaced a video card before, but I've upgraded memory, installed a hard drive and a modem before...is replacing a video card more complicated than that?

And, where should I start in determining what is compatible for my system/Vista etc?

9 more replies
Answer Match 57.96%

HP Deskjet 610CL driver doesn't work with Vista. HP Support in Bombay, India says "You should buy a new printer."
Printer still works great with windows 2000.

So should I remove Vista & install Windows 2000 on my PC or is the a driver somewhere that will fix the problem? Don't tell me to go to HP website. BTDT, it teels me that the driver is already installed on Vista. That's the one that doesn't work.

Anybody know ANYTHING about this problem?
 

A:Deskjet 610CL driver doesn't work with Vista

12 more replies
Answer Match 57.96%

Hi guys,

I have 3 virtually identical PC's and just bought 3 new Gainward GTX 750Ti video cards for them.

The problem is that the new card type doesn't work in one of the PC's and all I get is a black screen from start up.

The PC with the problem was running a Gigabyte M61pme-S2 video card before which still works fine in that PC and the onboard video also works fine so there's something about the new card and that machine that is a problem, even though that combination is fine in the other identical PC's.

Things I've tried so far:

-I've tried the same card in other PC's and it works fine.
-I've tried putting a higher voltage PSU in the machine with the problem.
-I've tried removing the BIOS battery for a minute to reset the BIOS and also selected default factory settings
-I've tried a new video cable and new monitor
-I've tried running through all cables out of the card ie. HDMI, standard etc

I'm not sure what else to try.

Can't be a driver problem because it doesn't get to that stage.

Can someone please offer some advice on what the problem is as I doubt I can get a refund on a card that will test as working.

Many thanks,

Ana
 

More replies
Answer Match 57.96%

I'm starting to have a lot of problems with IE11 and O365... time for an update???  The latest one, and the most critical, is that I'm trying to insert or embed an O365 video from the video portal, and it isn't visible in IE11. Works great in Chrome,
but we just went through a long battle to get everyone to use IE11 as their default browser.  Now I feel like we have to tell them to use Chrome AGAIN, which isn't going to go over well. A couple of days ago, I was having problems with the new list interface,
adding text to a rich text field and the ribbon disappeared... again, works great in Chrome. IE11 definitely has bugs !

alliswell0520

More replies
Answer Match 57.96%

Okay, I hope someone here can help me. I tried contacting the company whose page it is about this issue but they were absolutely no help at all.

I have a paid subscription to a site called Anistock.com that provides video backgrounds. One one of my PCs I can view site without issue, on 3 others I cannot. I don't know what the issue is. I tried downloading or updating my Adobe flash, my adobe shockwave, and even downloaded a few codec packs, trying to get the site to be viewable.
When i go to the site all i get is the top frame section to show, then the page just looks like it is loading - but like forever!!!
I cannot figure out what is different about my one PC. One of them is Windows & professional 32 bit, one is windows 7 professional 64 bit, two are wiindows 7 home premium 64 bit. All of them are running IE8. (Thats where this issue occurs by the way. Oddly enough, I downloaded Opera and tried that, and with Opera the site does work)

There has got to be some settings I am not seeing, or something that I can check, or tweak, or install....something!!

Anyone have any thoughts or suggestions?? The website is http://www.anistock.com
I really would like to be able to use my paid for subscription....so any ideas would be swell!! Thanks
 

More replies
Answer Match 57.96%

I have a HP Pavilion dv6629us notebook, it has a s-video out port. I have 2 7pin S-video to RCA cables and 1 4pin S-video to RCA cable. The 4pin cable works fine but the image comes up on the TV in black and white, the 7pin cables do absolutely nothing. Anyone having the problem?
 

A:S-Video 4pin working but 7pin doesn't work

It's probably stating the obvious, but it seems that the 3 "missing" pins are the RGB information, while the first four are signal and luminance. What does the graphics driver program have to say about all this? It usually blows up a "TV configuration" dialog box when the S-Video port is sensed as active. If not right click on the desktop, then choose "Graphics Options > Properties > Then root around til you find something that applies.

I know, I know, but I'm sitting at a machine with only single monitor capabilities at the moment, and I also don't know whose graphics driver you're using
 

5 more replies
Answer Match 57.96%

Just got a new Asus P5PE-VM with a Core 2 Duo, and now only the onboard VGA works. When I put in my video card (EVGA GeForce 6800GT), the computer turns on still, but no matter which vga port I use (onboard or card) I get no display.

I am running Vista, but I don't think that would affect this. Bios is not the most recent, but the only update adds new CPU support.

Any ideas? My old mobo died, and I'm really hoping to keep this card...I love it! (not to mention can't spend the money for a new one).

Thanks!
Baker
 

A:Upgraded Mobo, Video Card doesn't work now

So the onboard works when the card is not in? What are your specs? PSU wattage? Start troubleshooting!
 

3 more replies
Answer Match 57.96%

Hello!
I installed Facebook App, and it works perfectly, but when I wanna watch a video in full screen, it doesn't go to full screen mode. is there any solution for this, please?

More replies
Answer Match 57.96%

Replaced dead videocard with msi HD6450 and machine won't boot. Tried old card I had laying around and it works fine. My searches have turned up questions about BIOS / UEFI compatability problems but no solutions. This is the second card I've tried, I sent the first one back assuming the problem was with card.Motherboard: Angelica 1.2CPU: AMD FX-8150Bios: Ang_716      4/5/2012The original card was a GeForce 8500GTThe card I'm temporarily using is a GeForce 9300 GE 

More replies
Answer Match 57.54%

Hi everyone. I'm trying to use Roxio's Easy Media Creator 7.5 on my Sony Viao PCG-VX88 with an Intel 82815 Graphics card. Of course now I find that the card is too old to run DirectX 9.0 3D, which is apparently required by the Media Creator. I checked for a new driver on the Intel site, but they no longer provide updates for this card; the last one came out in '02 and since I got the laptop in '03 I kind of doubt it would do any good. (if you want, see this old thread for some back-information I researched regarding this whole DirectX problem.)

Does anyone know of where I could get a third-party driver or patch or something that might enable my system to run DirectX 9.0, or am I doomed to install a new graphics card?

If I do need to install a graphics card, does someone have any advice about how to go about doing this? I've upgraded my desktop PC multiple times, but I've never even looked in my laptop. It has a little bay in the side that is apparently for some kind of upgrade cards, but I don't know what, exactly... can I use that for a new graphics card? (and should this paragraph be posted in a hardware section of this site?)

Anyway, please pick a part of this to respond to and let me know what you think. I could really use some help. Thanks!
 

A:Video Driver doesn't support Direct X

Sorry to say, not many laptops have upgradeable video subsystems, you'd have to do some serious research, or call the manufacturer to find out. Most of the time the video "card" is built into the motherboard in the laptop and can't be replaced.

On the other hand, there shouldn't be any reason you can't "install" DX9, you should be able to do that, even if your card can't take full advantage of it.

So it may be you need to find a different media creator? Or look into the video upgrade option, if possible. But nothing should be preventing you from installing DX9.

Sorry if this is redundant, I didn't read the "old thread". Getting late you know

cheers
 

4 more replies
Answer Match 57.12%

Hi,

I installed a new HDD on my Satellite A210-106. Usually it runs on Vista but I had Win XP Professional installed.
Everything woks but the sound/speakers. The driver ist not installed correct.

There unsed to be realtek driver on the old HDD but I can?t get hold of the driver working on XP on the toshiba download list or via realtek.

I would appreciate any suggestions to get the system running again.

A:Satellite A210-106 - Sound Driver doesn┤t work running Win XP

Which service pack version contains your installed WXP?

4 more replies
Answer Match 57.12%

Ok, so I've re-installed Windows XP (SP2) and after it booted up, I noticed that my onboard ethernet adapter wasn't recognised. So I went and downloaded the appropriate drivers (SiS900.zip) from the mobo's official site (it's a PCChips M848A mobo) but when I try to install the drivers, it still says that the hardware isn't functional (Code 1).

I've tried many different versions of SiS900 drivers but it simply won't work.

When I tried the setup.exe file that came with the official driver, the install would say "Update Driver for PnP Device Fail. Setup will exit".

That's when I simply forwarded the windows hardware installer to an XP folder i found in the zip file. But still, it doesn't work.

I really need help on this matter. Thanks in advance...

EDIT: Maybe it's worth mentioning that I re-installed WinXP over an existing windows partition without formatting it. I simply deleted the former windows installation files.

A:[SOLVED] On-board Ethernet Adapter Driver Doesn't Work

Have you tried directing the driver to install from SiS900\WinXP\netoem.inf ?

Go into your device manager, right click the device under network adapters and click update driver. From there direct it to the aforementioned file.

6 more replies
Answer Match 57.12%

I'm trying to add a Canon imageCLASS MF7470 printer to my laptop. When I plug it into the USB, Windows 7 detects it, but as unspecified. It says no driver is installed. When I do a Windows update it comes up with other imageCLASS models but not the one I have. I've tried going thru these threads to locate my options but nothing works. When I go to add printer, properties is as far as I can go cause the only tabs I get there are general and hardware. This is a work printer for a jobsite, so of course the disk has been lost at some point, but I need this running ASAP.

A:Add a Canon printer with no driver and Windows update doesn't work

Here is the driver page for Canon, just specify your OS, download drivers, install and go at it could be that MS just doesn't provide them. However Canon does for both 32 and 64 bit.

Canon imageCLASS MF7470

1 more replies
Answer Match 57.12%

Hi,
I've had this problem for quite some time and I think its about time I tried to sort it out.
I have a Toshiba satellite Laptop running windows XP and the latest WMP is my preferred media player.

About a year ago I had a Virus on this laptop that wouldn't allow me to connect to the internet. A friend took me through the steps in the security and the web part of this board and we dealt with the virus.

Ever since the play all function in windows that appears when you have media files in a folder has not worked. When I click play all I see the hour glass briefly but then nothing happens. If I try to select the files I want to play right click and then play all again nothing happens.

I don't get any warning or error messages, its as if the computer is ignoring my request

double clicking on a single file opens it in WMP normally.

I don't know if it is related but when this happened the quick media buttons on the laptop which allowed me to open WMP, play, pause, stop and select next track also stopped working and still don't.

Thanks for your help.
 

A:Play all function doesn't work for music or video files

To fix the file playing issue, try reinstalling WMP.

The buttons need special software installed and running. Try downloading it from Toshiba and reinstalling.
 

2 more replies
Answer Match 57.12%

Alright, so here's the deal. I have a Vivicam 20 Dual-Mode still camera with webcam capabilities. I recently got a new computer (HP Media Center PC m7470n; Windows XP Media Center Edition) to replace my old computer (Dell Dimension 8100 running WinXP home). For some reason, my new web camera does not work on instant messaging programs (MSN 7.5 and AIM 5.5) even though it worked on my old computer for both programs. Here's all I've found:
Both "Dual-Mode DSC (Still Camera)" and "Dual-Mode DSC (Video Camera)" show up under Imaging Devices in Device Manager. Neither have a yellow "!" next to them. It had been mentioned that having another imaging device connected (a scanner for instance) can cause a conflict, but the scanner connects via a parallel port and appears under "Other Devices" with no conflicts, I have no other such devices connected or installed (except for another, much more useless camera which I used for testing and got the same results and no conflicts.)

Un-installing/re-installing drivers/cleaning the registry of all "vivicam" entries does not fix the problem.

Using the latest drivers does not fix the problem.

I have tried all three (two?) USB hubs on my computer, including one with no other devices connected to it (or at least ones which have none connected either laterally or vertically).

In AIM, video shows up as grey in the My Camera tab, unless I've installed it and didn't resta... Read more

A:Video/web camera doesn't work on IMs - Worked before on diff. comp

Bumping.
 

1 more replies
Answer Match 57.12%

Hi,
i have have an Inspiron 15, 7000 series, bought about 9 months ago. On the laptop there are 2 video card: one integrated video card (intel HD graphics 5500) and one dedicated video card (AMD Radeon R M270). The problem is simple: the dedicated video card doesn't work; actually i can't even understand if it activates or not. I'm gonna explain better.
When i bought the laptop, i didn't noticed anything wrong with that, probably because the laptop was very fast, much faster then my old one. About one month ago, i had to use some programs for graphics, 3d modeling and rendering, and i noticed that there was something wrong qith the video card. Then i tried to deativate the integrated intel graphic to verify if the dedicated video card properly works. As i deativate the intel graphic card, the pc started using another video card (don't remember the ecactly the name, but looked like if it was a basic video card intergrated in the laptop - for sure a very ''poor'' video card). But the main problem was that the dedicated video card did't start working.
Then, i deativate the integrated radeon video card and reactivate the integrated intel video card: surprisingly i noticed that some programms, games or 3d modelling programms started working faster and more fluently.
Now the dedicated videocard is not active, but of course i wanna use it.
The diagnostic service on the dell website doen't even detect the amd video card (of course i have ac... Read more

More replies
Answer Match 57.12%

Video Card - ASUS 9800gt Ultimate It's a dual slot video card with a better cooling system. Link: http://www.newegg.com/Product/Product.aspx?Item=N82E16814121266 The cooling system is the same as the "EVGA Akimbo Cooler."

Whenever I start up a game the fan speed increases and the fan gets very loud (can hear it in more than 1 room in house). Once I exit the game, the fan after a minute or so becomes quiet again.

I used ASUS Smartdoctor to manually adjust fan speed and automatically adjust fan speed and both didn't work. Manual worked until I started a game, and fan went to becoming loud again.

Uninstalled Smartdoctor, installed Nvidia nTune, results were same as above.

I don't know why the manual fan speed setting doesn't keep a consistent noise level. No matter what I do the fan ends up reaching the same loud noise level. If I can't stop the fan speed from increasing, what would be a generally good % to set it at to reduce noise?
 

A:Fan Loud on Video Card - Manual Fan Speed Doesn't work

Edit: I used the Nvidia Physx Cloth Demo while using RivaTuner to view gpu temps. Right when I started the demo, the fan speed increased. While doing the demo, the gpu temp was at a constant 48 degrees celcius.
 

1 more replies
Answer Match 57.12%

Hercules Gamesurround Muse XL soundcard, windows 98 1st edition, PIII 800mhz, 512mb ram.

-The sound doesn't work properly, for example, played some games like hitman and mafia, and you cannot hear the gunshots or voices properly. Tried updating the drivers, and even got a new version of Gamesurround soundcard. But still didn't work.

Could it be direct X? Installed latest direct x too, still problems
 

A:soundcard doesn't work properly, while playing video games on pc

I have a Muse XL and had problems with Hercules driver for the card, I switched to the generic chipset drivers for the 8738 chip on the muse XL and found that the work better than the makers. You can find them here.

http://www.cmedia.com.tw/edl8738.htm

Also, check out the mixer in the generic drivers, you'll find a microphone booster and a few things that didn't come with the Muse's drivers from hercules for some reason...
 

1 more replies
Answer Match 57.12%

Pasting in contextual information from another post. ~ OBconflicker.Bi!nf worm keeps reappearing, windows defender monitor stops working, slow computer, windows search protocol windows pop up, Malware, virusPop up windows keep appearing "Windows search protocol host stopped working and was closed" Itunes occassionally doesn't work, Media Sync doesn't work. Hard Drive keeps working in the background. Windows Defender no longer monitors the running programs.End of added information. ~ OBLogfile of Trend Micro HijackThis v2.0.2Scan saved at 8:46:00 AM, on 1/11/2010Platform: Windows Vista SP1 (WinNT 6.00.1905)MSIE: Internet Explorer v7.00 (7.00.6001.18349)Boot mode: NormalRunning processes:C:\Windows\system32\taskeng.exeC:\Windows\system32\Dwm.exeC:\Windows\Explorer.EXEC:\Program Files\Windows Defender\MSASCui.exeC:\Program Files\Digital Media Reader\readericon45G.exeC:\Program Files\Java\jre6\bin\jusched.exeC:\Program Files\Intel\IntelDH\CCU\CCU_TrayIcon.exeC:\Program Files\Common Files\Intel\IntelDH\NMS\Support\IntelHCTAgent.exeC:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exeC:\Windows\WindowsMobile\wmdc.exeC:\Windows\System32\hkcmd.exeC:\Windows\System32\igfxpers.exeC:\Windows\sttray.exeC:\Program Files\... Read more

A:microsoft windows search protocol host stopped, slow, firefox doesn't work, itunes doesn't work

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Answer Match 57.12%

Win 8.1
i5
8gb ram
Intel HD 4000

Just a desktop without a video card.
In order to play World of Warplanes, they recommended a rollback to a previous version of the driver. I unistalled the video driver, downloaded the old one and restarted the computer.

Now the monitor (or monitors, as I tried with an Acer and a Samsung one) both pop up a "Input not supported" right after the Windows Logo even if a try to boot in Safe Mode (so, no, I can't enter Advanced Recovery Mode). The same after I try to boot from a USB.

The same error I got when I installed Win8.1, a month ago, but after the "Input not supported" remained for 15 minutes or so it restarted a couple of times, and after 40 de minutes the installation begun. Now I'm waiting for 2 hours and nothing.

A:Windows doesn't boot after uninstalling video driver

It looks that somehow the new driver changed the resolution or frequency and your monitor can't manage this.
Most Acer monitors only can work to max. 60 hz.

Try this.

Power down PC (you will have to do a cold/hard shut down by pressing the power button as you cannot see your desktop due to this message).

Disconnect the monitor from the computer

Disconnect the power cable from the monitor

Press and hold the power button(of the monitor) for 30 seconds

Reconnect the cable (power and VGA)

Turn on the computer and repeatedly tap the F8 key.

3 more replies
Answer Match 57.12%

Hi,
I've just installed Win7 Ultimate on my laptop Sony Vaio. I have a problem with my video driver.
I downloaded the driver from http://esupport.sony.com/US/p/model-home.pl mdl=VPCEH14FM&LOC=3#/downloadTab

When I launch the installation process, it says "successfully installed" and I need to restart my computer. When I do so, the screen is stuck at the windows 7 logo screen.
Now, in device manager, on "Display adapters", I have "standard vga graphics adapter" though I should have " intel HD graphics 3000" or "Intel HD graphics family".

If you have a clue of what causes this, please let me know. Thanks in advance for your help and your time

A:Computer doesn't start up after installing video driver

Hi Rick007.

Boot into Safe Mode and uninstall the display driver from the Device manager.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "Display Adapters" by clicking on the triangle in front of it.
Select the item under it, right click, uninstall.
Now restart the computer.
Then download and install it from intel; for 2nd Generation Intel? Core™ Processors with Intel? HD Graphics 3000/2000 .
32 bit: https://downloadcenter.intel.com/Det...ivers&lang=eng
64 bit: https://downloadcenter.intel.com/Det...ivers&lang=eng
Let us know the results.

3 more replies
Answer Match 56.7%

Hello
I have this motherboard:
915GVM6-F/ L

I need graphic driver for Windows 7 (WDDM) with Aero support. I installed driver for XP, but it doesn't support Aero. Please help

Intel 915GM/GMS,910GML

A:Intel 915GM/GMS,910GML Windows 7 driver and aero doesn't work

The specified chipset doesn't support Windows Aero unfortunately.

3 more replies
Answer Match 56.7%

Hi, I had some issues with a HDD around this time last year, so I replaced it with a new western digital HDD. I wasn't able to back anything up, so I cloned it instead.

turns out I installed the incorrect driver for my video card and suffered from the BSOD syndrome....

well, I finally got that sorted out, ( I think ) and now I am trying relentlessly to get catalyst pro control center to work properly. Ive read numerous places online that involves editing the Assembly folder, but I have no such keys in there.

when I try and run CCC, it tells me that I am unable to run as I wouldn't be able to change any settings within the app basically. Ive tried uninstalling, installing. trying ATI opposed to AMD- to no anvil.


I know for a fact that I had CCC on this pc, but it almost seems impossible to get up and running, I am very desperate to get this up and running.

thanx in advance
 

A:Catalyst Control Center doesn't work after I installed the wrong driver

Hhhmmmm... let's take a look

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop
Attach it to your next post by clicking the Upload a File button

 

3 more replies
Answer Match 56.28%

I got this error after i used the troubleshooter in my laptop. I was surprised to find my screensaver not working with the message "the screensaver can't run because it requires a newer video card or one thats compatible with Direct3D". This error happened recently after I reinstalled my Windows 7 Home Premium OS into my laptop. Before this it was fine.

Here are my laptop specs:
Acer Aspire 4745G
Windows 7 Home Premium 64-bit SP1
4GB DDR3 RAM
512MB ATI Mobility Radeon HD 5470

I'm at a loss because I installed the latest ATI Catalyst Suite then it happened. I read other threads quite similar to this before but I can't seem to solve it on my own, especially when I'm not good with computers and stuff. Therefore, any help would be much appreciated.

A:Video card driver doesn't support Aero effects

The 5470 drivers should support Aero. Don't know why youre getting that error but you need to visit Acer and get your drivers for your video card there.

Check here Acer Support: Downloads & Support Documents - Notebook / Aspire / Aspire 4745G and get the first AMD VGA driver - 8.84.7.4

You also might want to check this info for Aero - What is the Aero desktop experience?

9 more replies
Answer Match 56.28%

hi everyone, i got some problem with my windows 7 ultimate 7600 . .

when I choose themes aero, why it's just changing the wallpaper, toolbars and other effects do not change??

it say ; problem found "Video card driver doesn't support Aero effects"

The current video card driver isn't compatible with the Windows Display Driver Model (WDDM)??

when i used windows vista it works well but in 7600 version it doesnt work.

my graphic card is sis mirage3+ (sis m672)

how to solve this problem??

thx a lot. .

A:Video card driver doesn't support Aero effects

to enable aero to work properly ,the graphic card needs at least direct x 9 or higher, you're card unfotunately does not support that mode ,is the graphics onboard or in a slot? maybe advisable to invest in a newer card

4 more replies
Answer Match 56.28%

Aero isn't working and when Troubleshooting didn't work it told me "Video card driver doesn't support Aero effects". I tried using the Aero Activator and that didn't work either. I have a EVGA GeForce GTX 650 graphics card. Please help. Thank you.

A:Video card driver doesn't support Aero effects

Please go to device manager and click on display adapters and tell me what it says.

The way you get there
(Right click "Computer" icon than click "manage" On the left side choose "device manager" than click "display adapters")

It will show me what drivers you got.

9 more replies
Answer Match 56.28%

I know there are many other people having this same problem...

I just recently upgraded Windows 7 Ultimate from Vista Home premium. When I "upgraded" though I chose to completly reinstall my OS.

Anyways I used to have transparency, but when I try to get that same effect it says

"The current video card may support Aero with a driver that is compliant with the Windows Display Driver Model (WDDM). Contact the manufacturer of your computer or video card for a WDDM-compatible driver."

and then when I try to troubleshoot it says "Video card driver doesn't support Aero effects" . I've tried the "Fix it" options, but that doesnt work.

I just don't see how transperancy would work on vista but not with windows 7... do I seriously have to purchase a new video card?

A:Video card driver doesn't support Aero effects

Have you installed the latest motherboard drivers and video card drivers?

9 more replies
Answer Match 55.86%

Help my windows 7 laptop just keeps rebooting and i cant get to safe mode or recovery what should i do ?

A:system recovery doesn't work and safe mode doesn't work and just keeps reboting

System manufacturer and model?
 
Louis

0 more replies
Answer Match 55.86%

hi, I know there are many in the forum who have the same problem as mine. 
 
my computer was running fine last friday. I tried to start it on saturday, it says it can't startup and need to repair startup. I did run the repair but still can't startup. I tried to use system restore to earlier dates, it still can't startup. The computer has trojan virus before and I tried the anti-malware from internet to kill them. seems that it create more problem for my PC. I have some important files in the computer that I wish I have archived. 
 
wonder if any one can help. thx in advance.

A:can't start up computer-window7, repair doesn't work, restore doesn't work

I'll report this topic to appropriate helpers.
Hold on there...

6 more replies
Answer Match 55.86%

I downloaded Win7 x86 drivers for our Ricoh Aficio MP 171 from Ricoh, to load them onto a machine freshly updated from XP to Win 7. Every time i try to install them, Windows tells me the default driver it chose is the best one and won't install it. The driver it is using does squat, the printer was working fine when it was connected to XP, now the most we have gotten out of it is a few pages of jibberish when we tried to print a photo.

I have tried manually installing the driver from the device manager, i tell it to use a folder on the desktop where i copied the driver, but when i press next it immediately says the driver being used is up to date. I tried telling it to read from a dvd i burned the driver folder on to, it doesn't like that either.

I am toying with the idea of deleting the default driver from system32 (but copying it first to a data key), disconnecting from the 'net, and then installing the one from Ricoh.

A:Default printer driver doesn't work, Win7 won't update it. Ricoh mp171

Hi briligg, Have you tried installing the drivers in admin mode Run as Administrator Some times you have to overrule win7 and tell it you know best this time

4 more replies
Answer Match 55.86%

Got a new tablet pc. Put in a new hard drive and installed vista ultimate x64. Works great. I was suprised how much smoother it runs.

The 11a/b/g/n wireless LAN Mini-PCI Express Adapter isn't recognized by vista. My friend said it might be a problem because it doesn't work with 64 bit software. Went through the long process of installing vista 32 bit version. Same thing. It was recognized by vista.


So now here I am with 64 bit vista installed again. I downloaded a couple drivers that it could be from lenovo website. It still didn't work.

Before I started this whole project I went to the microsoft upgrade site to check compatability. While running XP, the site said that I would have to download the wireless lan driver and install it after i installed vista. It also said the fingerprint reader would need to be manually installed but I don't care about that.

Any suggestions?

A:IBM Lenovo X60t Tablet Pc wireless card driver doesn't work after x64 Vista

Hi davIbus

Have a look here;
Lenovo Support & downloads - Wireless LAN ThinkPad 11abg, abgn, bg, bgn for Windows Vista 32-bit and 64-bit- ThinkPad

Download using the file link

I hope this helps

Pooch

3 more replies
Answer Match 55.86%

I got this error msg when i tried to open Call of Duty(R) - World at War(TM)

can you guys help me ?
thanks
 

A:Video card or driver doesn't support UBYTE4N vertex data

11 more replies
Answer Match 55.86%

i tried running call of duty-Modern Warfare 2 and when i started it said this:
execing ragdoll.cfg from fastfile
----- Client Initialization -----
----- Client Initialization Complete -----
Attempting 22 kHz 16 bit [Windows default] sound
----- R_Init -----
Getting Direct3D 9 interface...
Pixel shader version is 2.0
Vertex shader version is 0.0
Video card or driver doesn't accelerate transform and lighting.
Video card or driver doesn't support UBYTE4N vertex data.
Huffman Took 69 Milliseconds
Error during initialization:
Video card or driver doesn't support UBYTE4N vertex data.


i was wondering if anyone could help me???
 

A:Video card or driver doesn't support UBYTE4N vertex data.

Hi and welcome to TSG.

If it is a desktop computer, you most likely need a newer and more powerful video controller card. If it is a laptop, you most likely need a new laptop.

Updating the video drivers may not help if the video hardware is old.
 

3 more replies
Answer Match 55.86%

I got this error msg when i tried to open Call of Duty(R) 4 - Modern Warfare(TM)

Please help me
 

A:Video card or driver doesn't support UBYTE4N vertex data :(

10 more replies
Answer Match 55.86%

can u plz help me?
My modern warfare 2 wont work
i have a Windows Vista Hp Pavillion dv6500

it keeps saying Video card or driver doesn't support UBYTE4N
 

More replies
Answer Match 55.86%

I have installed COD Modern Warfare but when i start it my computer shows this error
Video card or driver doesn't support UBYTE4N vertex data.
what should i do?
 

A:Video card or driver doesn't support UBYTE4N vertex data.

7 more replies
Answer Match 55.86%

can you help me with this?what do I need to do,to play Call of Duty warfare 2.I have a laptop,Fujitsu siemens,running windows xp...thank you in advance.
 

A:Video card or driver doesn't support UBYTE4N vertex data.

Your video card is not compatable for the game.
 

2 more replies
Answer Match 55.86%

Hi,

I am using Microsoft XP. After intsallation of Call of Duty 4, Modern Warefare, when trying to strat the game an error message appers: Video card or driver doesn't support UBYTE4N vertex data

Can you help me to resolve the problem.

Thanks!
 

A:Video card or driver doesn't support UBYTE4N vertex data

Welcome to TSG, offhand, it sounds like your card doesn't support that game. If it's a store bought computer, what's the make and model? If it's a home built machine, what's the make/model of the video card?
 

1 more replies
Answer Match 55.86%

------------------
System Information
------------------
Time of this report: 12/9/2012, 18:00:58
Machine name: SERVER
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_gdr.120830-0334)
Language: English (Regional Setting: English)
System Manufacturer: INTEL_
System Model: D945GCR_
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz (2 CPUs), ~1.6GHz
Memory: 2048MB RAM
Available OS Memory: 2038MB RAM
Page File: 1539MB used, 2535MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: Intel(R) 82945G Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(R) 82945G Express Chipset Family
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_2772&SUBSYS_D6068086&REV_02
Display Memory: 256 MB
Dedicated Memory: 0 MB
Shared Memory: 256 MB
Current Mode: 1280 x 768 (32 bit) (75Hz)
Monitor Name... Read more

A:video card or driver doesn't support ubyte4n vertex data

Can you help me in this issue....
 

1 more replies
Answer Match 55.86%

I am trying to play Call Of Duty World at War and I am getting an error:
Video card or driver doesn't support UBYTE4N vertex data. Here is my info- any ideas?
------------------
System Information
------------------
Time of this report: 10/23/2009, 15:52:44
Machine name: TYLERS-COMPUTER
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_qfe.090206-1239)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: OptiPlex GX520
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A05
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs)
Memory: 1014MB RAM
Page File: 567MB used, 1877MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
---------------
Display Devices
---------------
Card name: Intel(R) 82945G Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(R) 82945G Express Chipset Family
DAC type: Internal
Device Key: Enum\PCI\VE... Read more

A:Video card or driver doesn't support UBYTE4N vertex data

You have a DELL machine... which uses bad integrated video cards. It's probably not good enough.

go to http://cyri.systemrequirementslab.com/srtest/ and see if you your machine can run it. The game is in the drop down menu.
 

2 more replies
Answer Match 55.86%

------------------
System Information
------------------
Time of this report: 7/12/2012, 13:28:59
Machine name: ARGEE
Operating System: Windows 7 Home Basic 32-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120330-1504)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 02/04/10 20:21:09 Ver: 08.00.12
Processor: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz (2 CPUs), ~3.0GHz
Memory: 2048MB RAM
Available OS Memory: 2038MB RAM
Page File: 1359MB used, 2716MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: Intel(R) G33/G31 Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(R) GMA 3100
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_29C2&SUBSYS_82B01043&REV_10
Display Memory: 256 MB
Dedicated Memory: 0 MB
Shared Memory: 256 MB
Current Mod... Read more

A:Video card or driver doesn't support UBYTE4N vertex data

What are you trying to run? You need to update your video card driver or your video card won't run whatever program you are trying to run.
 

3 more replies
Answer Match 55.44%

hi,

i don't succeed anymore to bring back my screen as it was... i mean, i uninstalled the old driver because for some reasons it gave me problems, and now i still have the same problem - blurry shapes and words - which i have uploaded a screenshot but maybe you will see it correctly... i dont know.

anyway, i went into acer website, downloaded the official video driver for my acer laptop aspire 3000 but is still not working!! i dont know what to do, can someone help me?

thanks!
 

A:video driver...but it still doesnt work.

TRy another monitor
 

2 more replies
Answer Match 55.44%

hi,

i have been fooling around with my video driver and now i have problems, i have attached a couple of screen shot so it's possible to see how my screen looks like.... as u can see, it seems that this VGAsave driver i have downloaded from acer aspire3000 official page, it seems is not recognized from my PC......
what do you guys think?

thanks!
 

More replies
Answer Match 54.6%

I just upgraded from Windows XP to Windows 7 32-bit and NONE of my video players(vlc, windows media, divx, quicktime). I can stream videos online, but any time I try to play any files from my harddrive whatever player I use freezes up. Sometimes if I wait I will hear the audio, but the player itself is still frozen and no video will play. I tried updating my video driver, but it didn't help. I've tried every combination of file and player, but nothing works.
Processor: Intel® Pentium®4 CPU 3.00GHz

Installed memory(RAM): 2.50 GB

OS: Windows 7 Home Premium 32-bit

Videocard: GeForce 6200 TurboCAche™

I also have well over 100 GB of free space on my harddrive.

A:NO video players work (already updated driver)

Did you check your machine on the Microsoft website for any compatibility issues before upgrading?

Win 7 also has a system diagnostic that can pinpoint any problems as well. I'm on XP at the moment and I can't remember where to navigate to it. The search function should turn it up under performance.

2 more replies
Answer Match 54.6%

hi
when ever i install a game onto my coputer and try and play it, they all say that the spooge drive isn't installed properly and to make sure that i've installed DirectX properly. some of the game will get to the black screen before they start and it comes up with that "Don't Send or Send error Report" thing. i have recently reinstalled window onto it and some of the drivers like the audio one weren't installed. do you think that could be the same thing with the video driver. if so could you tell me where i can get a new one or find the old one on the computer somewhere?
cheers, hope you can help

A:problem with video driver, games won't work!

Hello & welcome to TSF,

you will have to give us more infor on the system

how old

brand name or custome build

how much ram /memory

what type of video card / after market or integrated

whats the wattage for the power supply

type of games you are trying to play

have you done the updates for your software & for Windows Xp

let us know

Mike

8 more replies
Answer Match 54.6%

It says:
----- Initializing Renderer ----
----- Client Initialization Complete -----
Attempting 44 kHz 16 bit [Windows default] sound
----- R_Init -----
Getting Direct3D 9 interface...
Pixel shader version is 2.0
Vertex shader version is 0.0
Video card or driver doesn't accelerate transform and lighting.
Video card or driver doesn't support UBYTE4N vertex data.


Error during initialization:
Video card or driver doesn't support UBYTE4N vertex data.

Please help me and be as thorough as possible, thank you in advance

More replies
Answer Match 54.6%

want to play cod mw2 but this stopped me PLEASE HELP
 

A:Error during initialization: Video card or driver doesn't support UBYTE4N vertex data

6 more replies
Answer Match 54.18%

My Sapphire ATI HD 4850X2 driver wont work on my Vista x64...
When I try to install it..."Catalyst has stopped working"..blah..
I'd really rather Not reformating...HELP
 

A:My video card driver wont work on Vista!

Please do not double-post.

http://forums.techguy.org/hardware/787850-video-card-driver-problem.html
 

1 more replies
Answer Match 53.76%

I am trying to use my CD-ROM drive and it doesn't work here are the list of things I have tried

Uninstalled and reinstalled the cd-rom driver it is a Matbleepa UJ-840D CD-ROM/DVD/CD-RW in my HP laptop (Didn't work)

Read stuff about code 39 and removed in the registry edit screen Upperfilters, Upperfilters.bak, Lowerfilters, Lowerfilters.bak and rebooted (Didn't work)

Removed itunes from computer (didn't solve the issue with cd-rom player)

Went back to a system restore point that was before the last time I used the CD-rom player and it worked and that (didn't work as well)

Read a lot of different posts about code 39 and nothing is given after the above steps are taken if it still won't work except to reformat which I would prefer not to do.

Any help would be greatly appreciated.

A:CD-ROM doesn't work, code 39 error, tried many things still doesn't work

1. Uninstall the drive through Device Manager.Restart computer. The drive will be automatically reinstalled.or...2. Delete Upper & Lower Filters http://support.microsoft.com/kb/982116Restart computer.or...3. Download, and run Restore Missing CD Drive patchDouble click on cdgone.zip to unzip it.Right click on cdgone.reg, click Merge.Accept registry merge.Restart computer.or...4. Go to Device Manager, click a "+" sign next to IDE ATA/ATAPI Controllers.You'll see two items:- ATA Channel0 (or Primary Channel)- ATA Channel1 (or Secondary Channel)Right click on each of them, and click Uninstall. Confirm.Restart Windows. They'll be automatically reinstalled.

6 more replies
Answer Match 52.92%

I can't access Radeon settings after I updated my video driver and then rolled it back to an older version. When I try to access it, I get this message:I am currently running driver version 15.201.1101.0. How can I get Readon settings back?

More replies
Answer Match 52.92%

Hello,

This is my first post. I wiped my drive and reinstalled Vista from the Installation CD. My computer is now not recognizing my video card and will not allow me to install the driver for it, it says there is no compatable hardware.

Video Card - ZOTAC GeForce 9800 GT

System is- 32 Bit Vista fresh from install cd

The Video card is not recognized by the Device Manager, or Game Booster. If I try to install the driver from the NVIDEA website - during setup it gets an error and says there is no hardware. I believe it is running on the software that is in the motherboard as I am able to get basic video - but if i run a game like hearts it tells me there is no hardware acceleration.

The tv is plugged into the video card that the CPU is not registering. That is a little bit why I am confused lol. Please let me know what i can to do to fix this issue. Thank you,

Sean

A:Wiped HDD/ Clean installed Vista from CD - Video Card and Driver will not work

Hello.. you are not trying a Beta driver are you. ? If so.. just get latest one that is not Beta and retry . Post back results please .

10 more replies
Answer Match 52.08%

Hello!
I have a problem. I have adjourned the bios of the pc acer aspire M1641 and when I have restarted the pc tuneup utilities it signals me this problem:

the peripheral "Nvidia port io control driver" doesn't correctly work

Do you know as solution for this?

A:"Nvidia port io control driver" doesn't correctly work

Hi,
Did you find a solution to this problem? TuneUp Utilities report on an identical problem on my win7 system

9 more replies
Answer Match 52.08%

Hi TechSpot folk, and thanks for in advance for anyone who can help me.

I've bought myself a new video card yesterday; HIS Radeon X1650 Pro 512mb IceQ, AGP. I went ahead to install it, and I get no picture after booting up.

I am receiving a signal to the monitor (I am not getting a "check signal" message) but no image comes to the PC. I went to put my old card in which is a Gigabyte 128mb 9600 Pro, and it now it doesn't work either!!!

Both cards are receiving power as theirs fans are chugging along.

I had also purchased a 1gig stick of RAM to complement my new video card, so I set my PC up the way it was before the attempted installation of the new card. Still nothing happening.

Current components of PC are:

P4 2.8ghz (D865PERL)
Gigabyte Radeon 9600 Pro 128mb
512mb RAM
DVD and Lite-On burner
 

A:New video card install no good, now older card doesn't work either

I don't know about the 9600 Pro but the X1650 Pro should have a power connector on it. Possibly a floppy drive type connector. Was that plugged in?
 

3 more replies
Answer Match 51.66%

This is the message I get everytime I run the auto detect driver util.
Driver detection not available Please try again later or use the Find it Myself tab to find drivers by Service Tag or see a list of drivers available for your product.
The laptop I use is 'XPS 15 9550'

A:Dell auto driver detect detect doesn't work any more?

I may be able to help.  I will be sending you a friend request so that I may get your information. 
Please accept the request. 

TB

5 more replies
Answer Match 49.56%

I have no idea what my sister and her friends were doing on the comp for a couple of days that i decided not to use it, but now:

- a few programs take forever to load or don't load at all, but they do show up under the processes tab in the task manager
- after pressing Ctrl Alt Del, the task manager icon appears in the system tray, but the thing only shows up a minute later
- my system recovery is "not able to protect my computer," and restarting does nothing
- actually, when restarting or shutting down Windows, it stops at where it only shows my desktop background and cursor [which is still able to move] and nothing else after that, so i have to hold the power button and force it to shut off
- when I right click the desktop and click on "Properties..." [or something similar to this action] it doesn't show up at all, and whenever I try to open any application after that, they don't even load at all either
- and probably other stuff that I haven't took note of yet...

Things i've tried to get rid of these problems:
- Virus scan with avast!, a couple viruses found and fixed, but nothing changed.
- disk clean up, nothing changed
- registry clean, nothing changed
- CURRENTLY defragging my C drive, hope something changes..

Anyone know what the heck's going on!?
Anyone got any suggestions on what to do next?
Anything helps and would be greatly appreciated!

A:programs not loading right, computer doesn't shut down right, sys recov doesn't work

no replies yet? :(

anyway, just stopped by to say that when shutting down, it takes forever to get to the "Saving your settings..." screen, and that's where I decided that it stops and nothing else after that.
Defragged my C drive, still no results besides the computer feeling a bit smoother-running o_o

1 more replies
Answer Match 49.56%

I have an ASUS notebook running windows 7 64-bit. I am using the QuietOffice power profile, however the screensaver won't kick in no matter what I do, and the display does not turn off even though I set it to be after 5-minutes of inactivity. I don't know if there is something running in the background... I have turned off my usb wireless mouse, and nothing....

Any ideas?

THanks.

A:HELP: power option doesn't work - screen saver doesn't start!

This is another case of factory bloatware interfering - in this case a useless factory utility overriding Win7's superior built-in version.

Googling the Quiet Office feature of Asus there are multiple reported problems. Best to default to the Win7 built-in Power Options in Control Panel. Set up a Balanced Plan unless you're a gamer then use High Performance.

Here are other tips for cleaning up factory bloatware

5 more replies
Answer Match 49.56%

I have a 4y old Sony VAIO (VGN-NS11J) that stopped working today morning after making a whirring noise

Repeated attempts to restart failed and after many attempts, I managed to get to the Startup Repair mode - after a long time, startup repair says it failed to automatically repair the problem

I managed to run system restore but after a while I got the following message: "System restore failed due to an unspecified error. The disk strucgture is corrupted and unreadable (0X80070571)

My laptop did not come with a Windows Vista CD/Recovery disk

My first priority is to recover a few files in the laptop - if I am able to do this, then I dont mind junking the laptop

Since this is an old laptop, I would prefer not to use an expensive professional to recover the data

Any help/suggestions would be much appreciated!

Rgds

A:Sony VAIO running Vista doesn't start-up, system restore doesn't work

You may be able to retrieve your data by using Ubuntu. Post #3 in this topic provides instructions.

1 more replies
Answer Match 49.14%

For the last month or so, every time I log off my account, the keyboard does not register at the Windows Log In screen. This makes it so I have to restart the computer and then it works fine.
There are three accounts on the computer, the casing has been half removed for the last 3 months, a DVD burner and driver recently installed 3 months ago and I am using a wireless off brand USB keyboard and mouse.
OS: Windows Xp Home Edition 5.1.2600 Service Pack 3
As for the second part, the computer requires several restarts to boot up, sometimes up to twenty minutes of turning on and off to boot up. Only started doing this a week ago.

A:My Keyboard doesn't work, and the computer turns on but doesn't start.

It sounds like something is wrong with your Windows XP drivers. Something like that happened to me while building my computer, and when I boot up the keyboard did not work because my copy of windows XP was bad. You could try reinstalling windows XP, and It might work better, but I dont have a definite answer to your problem.

3 more replies
Answer Match 48.72%

Have a friend with a relatively new Lenovo laptop using Windows XP SP3. Overnight he can't access the Internet via browsers, email or AIM. His desktop connected to the same router is working fine.

He can access the router by IP address using either IE7 or FireFox 3.5. Anything that needs a DNS server doesn't work. This does say though that he has a working connection to the router.

He's run MalWareBytes and his own McAffee software looking for bad stuff but has found nothing.

Running "ipconfig /all" from the command prompt gives exactly the same results for the laptop as his working desktop. The DNS servers are there. He can ping the DNS servers using their IP addresses. He is being assigned a proper local network address so DHCP is working on the router.

Any thoughts on where to look next to discover why the Internet applications don't seem to be able to find the DNS servers?

A:Can't Access Websites, Email doesn't work and no AIM doesn

FWIW, my friend took his laptop to a PC shop. Their diagnosis was malware. I don't know the identity of the malware. Anyway, the shop saved his data then formatted and reloaded XP SP3.

1 more replies
Answer Match 48.72%

Cant get it to updateand when i use thr troubleshooternit doesnt work either
 
Farbar Service Scanner Version: 21-07-2014
Ran by Administrator (administrator) on 03-01-2015 at 16:34:05
Running from "D:\Users\Administrator\Downloads"
Microsoft Windows 7 Ultimate  Service Pack 1 (X86)
Boot Mode: Normal
****************************************************************
Internet Services:
============
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.
Windows Firewall:
=============
mpsdrv Service is not running. Checking service configuration:
The start type of mpsdrv service is OK.
The ImagePath of mpsdrv service is OK.
MpsSvc Service is not running. Checking service configuration:
The start type of MpsSvc service is set to Disabled. The default start type is Auto.
The ImagePath of MpsSvc service is OK.
The ServiceDll of MpsSvc service is OK.
Firewall Disabled Policy:
==================
System Restore:
============
SDRSVC Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
System Restore Disabled Policy:
========================
Action Center:
=====... Read more

A:Windows 7 doesn't update and troubleshooter doesn't work

Hello,
 
Please follow the instructions Here to run the System Update Readiness Tool. When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:C:\Windows\Logs\CBS\CheckSUR.logC:\Windows\Logs\CBS\CheckSUR.persist.log

1 more replies
Answer Match 48.72%

Hello.
I am quite new here, but I've been wanting to get this problem solved for a long time, and I haven't seemed to get any answer.

So here's my problem:

I bought my Asus N53SV for around a year ago, and it worked great. But for some reason something changed.
When I try to open bluetooth, nothing happens. And when I want to connect anything using bluetooth, it doesn't work.

I tried to do this:
[windows] + r >bttray
But nothing opens up.

Please help!

Thank you,
Karstin

A:My bluetooth doesn't work. bttray doesn't open.

  
Quote: Originally Posted by Karstin1812


Hello.
I am quite new here, but I've been wanting to get this problem solved for a long time, and I haven't seemed to get any answer.

So here's my problem:

I bought my Asus N53SV for around a year ago, and it worked great. But for some reason something changed.
When I try to open bluetooth, nothing happens. And when I want to connect anything using bluetooth, it doesn't work.

I tried to do this:
[windows] + r >bttray
But nothing opens up.

Please help!

Thank you,
Karstin


Hi Karstin,

Welcome to Seven Forums.

You would need to re-install Bluetooth software/driver for your system. Please check the link below for finding out the drivers:

ASUSTeK Computer Inc. -Support- Drivers and Download

If you have any further queries, please feel free to contact us.

7 more replies
Answer Match 47.88%

Hi... xp stopped responding and I decided to power off.

Was never able to restart after that. Normal boot shows the windows initial screen, but eventually just restarts, safe mode does the same thing whether it's with network, command line or plain safe mode. Last known good configuration does the same.

Needed to use a file so decided to remove the HD and re-install to another PC. I did have access to the file in question but now I'd like to fix the problem.

The other system uses AVG. I started a scan and it detected Cekar.d (A0003977.exe, wdfmgr.exe and initially ntldr.exe), Dropper.Inor (ntdetect.hta, A0003979.hta), PSW.Generic5.ABVW (ctfmona.exe), PSW.OnlineGames.AAFI (ctfmonb.exe), PSW.Generic5.AFYK (ctfmond.exe), PSW.OnlineGames.ZWT (LotusHlp.exe) and some others but for whatever reason the scan stopped. I restarted it and now the AV still finds most of the threats it was seeing before but not Cekar.d. in the ntldr.exe file.

The system that had the problem was running Win XP Home SP1. Unfortunately, I can't find the manufacturer's recovery CD.

HD is still in the other PC. How should I attack the problem?
 

A:XP doesn't reboot, safemode doesn't work

Update... Three passes of AVG and all threats were put in vault. Tried to re-install the HD to the initial system but no change... System says it didn't start correctly, that a new software of hardware could be responsible, the suggests to try las known good config, none of the options work, they all perform some tasks then windows reboots and ends up in the same screen.
 

2 more replies
Answer Match 47.46%

Acer aspire's Bluetooth doesn't work since I bought it I've installed drivers too but it doesn't work what should I do.
In its specs it has Bluetooth . But there is no Bluetooth device found in device manager how to repair this.
Please HELP!!

A:acer aspire 4738' s bluetooth doesn't work but wifi work?

Hi ... Welcome to Seven Forums ... What is the Model Number of your Laptop ? ...

Did you buy the Laptop from new ? ...
Did you mean Windows 7 x86 ?...
If your System Specs are correct you have 4 GB of ram ? ...
If that is the case your Windows should be 64 Bit ...

9 more replies