Tech Problem Aggregator

Brightness Issues - Intel HD Graphics 5500

Q: Brightness Issues - Intel HD Graphics 5500

Hi,

After having issues with my W7-64 bit HP Envy 15 laptop, I decided to reinstall the OS. Everything went as planned until I installed the win64_153619 graphics driver from the Intel website.

Although the driver installed OK, the control panel interface is now different (now called Intel HD Graphics Control Panel)




There's no longer brightness control. The power options in W7 only has 10 steps for brightness of which are either too bright or too dark. My question is, how can I have more control over brightness? Third party software?

A: Brightness Issues - Intel HD Graphics 5500

I don't have this setup, but will on a new Toshiba Laptop with the Intel 5500 graphics that I just ordered. I'm posting to track this thread to see what transpires.

Sorry for hijacking it.

6 more replies
Answer Match 88.2%

Edit: I fixed it! (I was causing the problem myself but uninstalling the chip in the first place when i should have been disabling it instead)


Ok... I looked for about an hour and decided i would have to make a new thread for my specific problem... so sorry if im making my first post in an odd place

I recently installed a NVIDIA GeForce 5500 FX PCI 256MB DDR video card
followed directions as best i could, and disabled the Intel integrated graphics... but my PC insists on REinstalling the intel integrated graphics controller upon restart... It left me alone for awhile and i could run Counter Strike : Condition Zero moderately well (low frames after playing for over an hour) but after allowing my computer to update itself (while using IE to dowload firefox for a reinstall, IE randomly decided my home page was going to be the microsoft site for the day) and since then no matter what i do the computer insists on trying to reinstall the intel integrated graphics thing...

so my question is, how do I make this stop? how do i keep the computer from giving me the dreaded "found new hardware" bubble when im using a FAR superior (REAL) video card already?

is there something i do in the BIOS (i hope not, i dont like messing around in there) or on the motherboard itself?

i have some basic info about my comp in my signature but im going to use "PolSystemInfo" to find all my PC specs and just copy paste them below, I just hope its enough info to help so... Read more

A:NVIDIA GeForce 5500 FX-vs-Intel Integrated Graphics... please make intel go away!

Hmm that didn't happen to me when I put mines in. Did you install the NVIDIA drivers? Try disabling the onboard in the device manager. That?s what I did. There doesn?t seem to be an option to turn it off in the bios (my bios) maybe there is for you however. It isn?t too complicated. Just simply look for onboard graphics or integrated graphics controller or w/e and select disable, but first try disabling it in the device manager. It should be listed under display adapters -> properties -> disable this device.

You should upgrade to DX9.0c...
 

4 more replies
Answer Match 84%

Have problem with intel 5500 HD graphics driver on dell 7548. Getting  error code 43 since updating to windows 10. After longing onto windows it return to sign in screen looking to missing driver. No one seems to have an answer.  I tried installing every driver possible from intel and Dell

A:intel HD 5500 graphics

Uninstall all the video drivers (if it's Intel only, there will just be one set;  if it's a hybrid video setup, there will also be an nVidia or AMD driver).
If this is Windows 10, reboot the system and make sure you're online.  Windows should pick up and install the video drivers for your system, at least the Intel one.  If not, the correct driver for Windows 10-64 bit is this one:
www.dell.com/.../DriversDetails

1 more replies
Answer Match 82.32%

Hi all, Bought a new Aspire F5-571 two months ago with Windows 10 preinstalled. Recently, I've started getting the error message in the subject line of this post. Doing some research reveals that it could be a problem with the display drivers. I've checked Acer's website for my model and the only graphics drivers available are Intel's VGA drivers. Intel's web site reveals that the drivers for Intel HD Graphics 5500 are OEM drivers and are shipped by the manufacturer - obviously in this case Acer. Anyone any idea if there are updated drivers anywhere on Acer's website ? Regards, gneil15










Solved!
Go to Solution.

A:Aspire F5-571 - Intel 5500 HD Graphics display dri...

http://www.howtogeek.com/223864/how-to-uninstall-and-block-updates-and-drivers-on-windows-10/ remember also to check C:\Intel folder and delete VGA drivers inside if listed.

6 more replies
Answer Match 82.32%

Hey everyone, its my first time posting so please be gentle lol.hope you can help.  I have a Lenovo Z51-70 with intel graphics 5500.  I would like to upgrade or add another graphics card to it so that I can start playing better games on my laptop and to also increase the fps.  Can someone please tell me if this is possible and suggest a suitable graphics card? I will look to upgrade the ram at a later date to the max 16gb.. Processor - I7-5500U @ 2.4ghzRAM - 8GBOS - Windows 10 Many thanks for your help and suggestions

More replies
Answer Match 82.32%

Hello,

I have been searching on the internet about this issue I'm currently battling. I have have found similar issues but not exactly what I am going through.

I am hoping you experts can help me. Here it goes...

I have a Lenovo G50-80 laptop, which is less than a month old. It came with Windows 8.1 and had a free upgrade to Windows 10. It ran fantastically except I still preferred Windows 7 - I did a clean install.

The problem is my graphics card. When I had Windows 10, in the dxdiag page I had the following tabs:System
Display
Render
Sound
Input

Basically on the Display tab, the Intel HD Graphics 5500 is displayed and on the Render tab, I had the AMD Radeon HD 8500M.

Now that I downgraded to Windows 7 (installed all updates including SP1), the Render tab is no longer there.

I have checked the device manager and saw both cards listed and active with no errors.

I did the following:Updated Drivers for both Intel and AMD graphics
Uninstalled all graphic drivers and reinstalled Intel first then AMD
Changed the settings on the AMD graphics controller to Maximum Performance on the game I am playing

I do not know what I am missing here.

I am really looking forward to a solution.

Thank you in advance, gentlemen!

More replies
Answer Match 81.48%

Hi all: I have a problem with my laptop (model VN7-571G). After a recent Windows 10 update, now I am not able to connect the laptop to my flat  LG TV via HDMI. I think it has to be related to Intel Graphics 5500 (current driver 10.18.15.4248). When I connect the laptop to my flat TV, laptop screen goes black (as it happened before), but TV message says "Without Conection". If I try to use Intel Driver Update Utility 2.6.1.4, it says I have to go to Acer website to get the drivers. I have already uninstalled all Intel drivers (VGA, chipset, etc.), and installed the ones in Acer website but the problem still exists. Any idea how to solve it?. Thanks and regards from Spain.Ignacio

More replies
Answer Match 81.48%

Hello,

Microsoft has installed an icon for get Windows 10.
In validating the application I tested the equipment and it appears that the graphics card is not compatible with windows 10.
The graphics card is a intel hd graphics 5500. This problem is it unacceptable for the transition to window 10 ?

I buy this Satellite S50-B PSPQEE-00500LFR one month ago.

A:Satellite S50-B - get Windows 10 - Intel HD graphics 5500 uncompatible

Hi

As far as I know Windows 10 is still in testing phase so Toshiba didn’t start official Windows 10 support. Windows 10 drivers are not offered for download.
The same situation was noticeable few years ago before Win8 was offered on the market.

4 more replies
Answer Match 81.48%

Hello, am the proud new owner of a T550 type 20CK and ProDock. The ThinkPad itself has the 3K (2880 by 1620) LCD panel. I want to use this machine at my desk with an external 4K (3840x2160) monitor so that windows can move from screen to screen without scaling. But the Screen Resolution section of Windows 8.1 control panel only shows a max resolution for the external screen of 2560x1440. The hardware is supposed to be able to do this. I think I need a better driver. Explanation: Graphics are from the Intel HD Graphics 5500 onboard chip. The spec sheet for my machine, here, http://psref.lenovo.com/Product/164?MT=20CK  says  "Intel HD Graphics 5500 in processor only, or Intel HD Graphics 5500 in processor and NVIDIA GeForce« 940M, 1GB memory (discrete models are only available in Western Europe); supports external analog monitor via VGA and digital monitor via Mini DisplayPort; supports three independent displays; Max resolution: [email protected] (DP via mDP cable); [email protected] (VGA)" Yet this resolution is not selectable. The Intel HD graphics 5500 driver updated by Lenovo System Update is dated 11/18/2014, pretty old. Intel's site has a driver dated 3/6/2015. But the system will not let me install this driver saying my system needs a custom driver I must obtain from Lenovo. Please help! Bryan











Solved!
Go to Solution.

A:T550 with Intel 5500 graphics, 4K external monitor

How are you connecting the monitor? DisplayPort? Have you tried plugging it into the laptop directly? I have the same question - I just received my T550 today, got the Pro dock, and I am waiting on a 3440x1440 monitor. Hoping that everything works...

9 more replies
Answer Match 80.64%

Ever since I downloaded the Windows 10 anniversary update, my display has gone absolutely haywire. Weird dots all over the place, major screen tearing--it renders the pc basically unusable. I've isolated the problem in the graphics card--Intel HD 5500, driver version 20.19.15.4360. Disabling the graphics card makes all of the problems go away instantly. However, disabling it also means I can't dim the screen, use HDMI, or my Flex anti-blue-light software; being unable to dim the screen at all also drains the battery. I have tried uninstalling and reinstalling the driver, checking for driver updates, rolling back the driver to the previous version, all to no avail. I have contact Intel directly; they sent me a different, generic driver which I couldn't actually install because it said "The driver being installed is not validated for this computer." I've been all over the forums and Google and I haven't come across anybody else with this exact problem. I have been dealing with this for weeks now and it's driving me crazy--every time my pc updates I hope this will be the one that fixes it, and then, nothing. I have been nothing but happy with my HP Envy up until now, so this is really frustrating. Any help would be appreciated.

More replies
Answer Match 79.8%

I am using the VGA port of a Dell 4-in-1 adapter (DA100) to connect my XPS 13 with touch screen display to a Dell U2412M monitor. The Intel HD Graphics Control Panel does not detect that there is an external monitor attached to the computer, i.e., the Graphics Options menu does not show the "Output To" option, the Graphics Properties' Display menu shows only "Built-in Display" under the Select Display tab, etc. The DA100 was installed remotely by Dell Support (after neither I nor they could find the driver on the Dell support website, as instructed to do by the software driver download guide that comes with the adapter), so I assume that it was installed correctly. Has anyone else experienced this problem and, hopefully, have a solution?

A:External monitor not detected by Intel HD Graphics 5500 on XPS 13 with Dell 4-in-1 adapter

I have the same problem, but with the HDMI port connected to a panasonic tv

1 more replies
Answer Match 79.8%

Hello! I have a query related to video memory of Intel HD Graphics 5500. When I have installed the recommended driver on Dell site for my laptop, it showstotal available graphics memory 3839 MBdedicated video memory 0 MBsystem video memory 0 MBshared system memory 3839 MBBut when I updated the driver from device manager, it showstotal available graphics memory 3968 MBdedicated video memory 128 MBsystem video memory 0 MBshared system memory 3840 MB
Can anybody please explain this? Also, should I keep this updated driver or roll back to the previous version?
One more thing, when I set up this laptop for the very first time after purchase, I remember the total graphic memory it used to show was something around 2k MB. I don't understand why does it share this much now. And if this graphic memory is shared from RAM, then it's almost eating up 4GB of my RAM!! The system has total 8GB RAM. Is it fine to let the Intel graphics share so much of RAM when this laptop already has 4GB dedicated Nvidia Geforce 920M? Please help.
Thank you.
Kind regards,
Aditya

A:Inspiron 5558 Intel HD Graphics 5500 Video memory query

I have the same question!! Have you found a solution?I'm specially interrested in the last part of your question: Why the system needs shared memory from the 8GB RAM if there is the NVidia 4GB dedicated GPU?!?!?!

1 more replies
Answer Match 74.34%

The latest Dell drivers for Intel 530 graphic card cause minor brightness flicker every 30 s or so (although not at a regular interval). This has been reported on the Intel forum.
I first uninstalled the Intel drivers, after which the flicker no longer occurred. I later found the post mentioned above, which highlighted that the problem only started happening since after driver version "20.19.15.4331". I reverted to this driver, and indeed, the flicker is gone.
Hopefully this allows you to pinpoint which changes have been made in between this version and "20.19.15.4390". I would like to benefit from the latest drivers. For example, currently (I do not know whether it is related) when I maximize Windows the animation is very choppy. 

A:Latest Intel Graphics drivers cause brightness flicker, older ones do not.

What model computer? You have posted in the laptop forum. Laptops almost never have graphic card updates and those rare updates must come from Dell Support. All laptop drivers must come from Dell not Intel. Laptop drivers are customized by the laptop manufacturer. Reinstall your original driver. If you need to download it, get it from Dell Drivers and Downloads.
Read the intel answer in your post's link. It says--
It is important to mention that we sell our Intel chipsets and processors to third party manufacturers and they design their own computers with their own features, settings, and capabilities. For that reason they design their own drivers, to meet the exact specifications on their computers. Your computer is having problems with our generic Intel graphics drivers; the best you can do is installing the customized driver released by the OEM (Original Equipment Manufacturer).

1 more replies
Answer Match 64.26%

So I went to update my graphics driver but Intel's updater said this computer uses a custom driver meaning I'd have to get it from this website. I did but it said that the driver was not validated for this computer, which is impossible because it was custom made for this computer's hardware. So I manually installed it and now it keeps giving me problems like seemingly randomly crashing with "display driver stopped responding" type errors when I play games, often either rendering them unplayable or crashing them, seemingly depending on the game. Some of them have no problem with this I think but after the latest update to Phantasy Star Online 2 for example, it keeps crashing with this error after a couple of minutes or so. Exactly what driver am I even supposed to be using?!

More replies
Answer Match 64.26%

I have my asus laptop hooked to my hd tv via hd cable. it works fine under the old driver, yet it's calling for an update and each time it updates, I get horizontal lines on my t.v. The screen on the lap top is clear and fine when i unplug the cable. I have to roll back the driver in order to get the t.v. to work again, but I'm sure the update is for a reason. What am I doing wrong? Am I missing something?

A:intel graphics driver issues

Simply do a System Restore

3 more replies
Answer Match 64.26%

Hi,

My tablet/laptop(2in1)'s screen goes black for no reason and sometimes will flash the mouse pointor and after about 10-30 seconds later I can see the desktop again, can you please help?

System specs
===================================
Linx 1010b
Intel Atom Z375F @ 1.33Ghz
2GB ram
32 bit OS
Intel HD Graphics
===================================
DirectX Report

------------------
System Information
------------------
Time of this report: 6/8/2016, 17:42:30
Machine name: WINDOWS-10-PC
Operating System: Windows 10 Home 32-bit (10.0, Build 10586) (10586.th2_release_sec.160422-1850)
Language: English (Regional Setting: English)
System Manufacturer: LINX
System Model: LINX1010B
BIOS: LINX1010B.R22.03.010
Processor: Intel(R) Atom(TM) CPU Z3735F @ 1.33GHz (4 CPUs), ~1.3GHz
Memory: 2048MB RAM
Available OS Memory: 1986MB RAM
Page File: 2179MB used, 812MB available
Windows Dir: C:\WINDOWS
DirectX Version: 11.2
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
Miracast: Available, with HDCP
Microsoft Graphics Hybrid: Not Supported
DxDiag Version: 10.00.10586.0000 32bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No ... Read more

A:Intel HD Graphics driver issues?

Have you tried reinstalling the graphics driver?

more replies
Answer Match 64.26%

I dont wanna go into details.
used asrock drivers first and yes I installed the driver no errors.
but,I install the vga driver and all normally but when I restart the pc,log in screen sometimes flashes for a sec or 2 sometimes doesnt and thenBOOM blank. just black screen of nothing and if you let pc runnin' it powers off after min or something.
sounds weird so heres a video :
View My Video


also I tried installing old version of my driver the "not for the 3rd generation" and I got messege this computer does not meet the minimum reqiurments blah blah. then I went to install the "3rd generation vga driver" and successful but then this black screen problem. then I tried the win 8 drivers which appers to be for both win 8 and latest win 7 ? but same thing. disabling the driver in device maneger lets me use my pc but enabling it comes to this black s...I also now used uniblue driver scanner 2013 to update ALL my drivers except the vga thing cuz I did use the win8 lates driver from intel website so I dont think installing that driv er will solve the issue. Please help me this is sooo annoying. Also could it be that I'm using VGA cable?

Forgot :
system specs:

win 7 64bit

intel core i5 3450S

Intel h67m motherboard

400W power s.

300gb ssd

4gb ddr3 1333 ram
 

A:A bunch of Intel HD graphics issues just come and come

Make sure that the motherboard bios is set to initialize the on-board graphics first and make sure you only use the video driver from the ASrock support website
 

12 more replies
Answer Match 63.42%

Hello , I have just got a  Lenovo g50-70 i3-4030u running on a Windows 8.1, I installed all the drivers from the DVD provided and my graphics card appears not to be working properly, for example I have tried installing Age of Empires 3 , and it says that my current graphics card has only 32 MB and the game will not run properly. GTA IV says the same, 32 MB appendure size. Any ideas?

A:Intel HD Graphics family issues on a Lenovo g50-70...

hi andrewcezar,
 
Welcome to the Forums.
 
Can you right click on the desktop, choose Graphics Properties and post a screenshot of the system information
  - Sample image
  - Sample image
 
From the list below, Ageof Empires III should be playable on the Intel Core i3-4030u which is powered by Intel HD Graphics 4400. As for GTA IV, I doubt this game will run as it doesn't meet the minimum system requirements
 
More info:
Playable Games List for Intel« HD Graphics 4200/4400
List of games that run on Intel HD4400 Graphics
PC System Requirements for GTA IV
 
 
Regards

8 more replies
Answer Match 62.58%

Hi, can someone with a better eye dissect two recent BSOD minidumps for me?  Specifically the 2016 one.  For a while I've been experiencing BSOD problems, which later I realize it gets triggered only after using my machine a certain way, I'm suspecting part of the culprit could be opening a WebMIDI application in chrome, not sure.  Essentially, I know they pretty much never happen if I avoid certain tasks, even over the course of several days of runtime, which is attainable.  But then, I seem to randomly trigger these BSODs the quickest if I combine running a WebMIDI application with a good deal of webmidi and webaudio usage, a running virtual machine doing the same things, and doing things in the background like HD YouTube, just waiting for the crashes.Also, I'm having suspicion that the bluescreen crashes are directly the fault of the Intel drivers I have, because the MiniDumps I have tend to mention Intel HD Graphics a lot, but not entirely sure.I already started an Intel graphics forum topic about it (along with earlier minidumps, dxdiag.etc), where a intel employee responded saying they've updated the driver and I should test with the current version, which I did.  I'm currently on 15.36.28.4332 (10.18.14.4332), and still getting the same issue.  I'm just not sure if I should continue blaming it on that or not, and thus bother replying to the topic?  Or, could this be an entirely different issue altogether?... Read more

A:Windows 7 BSOD issues, are they Intel graphics related?

Download BlueScreenView:http://www.nirsoft.net/utils/blue_screen_view.htmlunzip downloaded file and double click on BlueScreenView.exe to run the program.when scanning is done, go to EDIT - Select AllGo to FILE - SAVE Selected Items, and save the report as BSOD.txtOpen BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

6 more replies
Answer Match 62.16%

My laptop specs are:
i5-5200u
Intel HD 5500/GT 940m
8gb ram
15.6" 720p display

Whenever I try to set a 1080p custom resolution via graphics properties i get the error, "this resolution exceeds the maximum bandwidth capacity". After a whole day of googling i have found nothing but Intel shifting the blame to manufacturer for limiting the hardware, I understand this is a driver issue as iGPU do not support custom resolution like all their competitor does, ATI/AMD/NVIDIA.

So i just want to try my luck here and see if there is any other solutions, I purchased this laptop this morning and really like everything except the resolution, its a hard pill to swallow after experiencing dual 24" 1080p displays and really limits my productivity on campus. Any help or replies (even if its to confirm there is no existing solution to make me finally give up) will be greatly appreciated, thank you in advance.

in case you are wondering why i went for the inferior resolution, the laptop i got was too good of a deal to pass up and a similar spec at 1080p will cost $400+ more. right now i am regretting the decision every passing moment

A:How do I set custom resolution for Intel HD 5500

Since nearly all Notebooks have fixed hardware versus Desktops where things can be changed I'm afraid you would have to take advantage of the seller's return policy and try to get a Notebook that more nearly meets your needs. There are some that offer dual video adapters but I haven't checked them out yet.

3 more replies
Answer Match 62.16%

I downloaded the Command and Conquer game and it doesn't work. I contacted the manufucturer and they told me I will have to update my Intel Graphics and I'm not sure how to do that. Can someone please give me a detail instruction how to do it? I've tried using the intel app but doesn't work. Please someone help.  thanks,-R

A:How to Update Intel 5500 HD Graphic

Hi, You're notebook shipped with Windows 10 Home 64bit so the latest Intel driver on your HP product page can be downloaded from the link below - save this software package to your Downloads folder. http://ftp.hp.com/pub/softpaq/sp74501-75000/sp74713.exe When the download has completed, open your Downloads folder and double-tap the software package to start the installation - follow the on-screen prompts to complete this. When done, restart the notebook. Regards, DP-K

3 more replies
Answer Match 62.16%

I'm having trouble installing the drivers for a Intel 82852/82855 GM/GME Graphics Controller in Windows 7 on a Gateway/Motion Computing M1300 tablet.

Before you say "DriverMax" please note that Windows 7 is the only operating system installed on the tablet. I hope there's another way to get it working.

Here's the thing that strikes me as odd: I have gotten it to work perfectly, but as soon as I restart it goes back to its old ways (default VGA controller driver, etc).

Here's what I do to get it working:

1) I run the setup file that came with the driver I downloaded from Intel (version 14.19.50), either natively or in Windows XP compatibility mode,
2) The setup software asks me to restart, and I comply

When the computer boots back up after those steps everything is working just fine, BUT then a Windows prompt appears telling me that I need to restart in order to complete the driver configuration. When I restart hardware once again has trouble.

Here are some screenshots that took while the driver was working correctly:





Why does it say that it will uninstall the drivers when restarted?








And here are some screenshots taken while the driver is NOT working correctly:








My real problem with not having the correct driver installed is not that display functions are lost (though they are), but that the Hibernate and Stand By modes are disabled.

Does anyone have any suggestions? Is there a way to keep Windows 7... Read more

A:Intel 82852/82855 GM/GME Graphics Controller Driver Issues

I have this problem too. Because it defaults back to "standard VGA" when I watch video it is very "liney", in other words, not the full shilling.

No matter what I do I simply cannot convince Win7 that my driver, (exported using Drivermax), is the correct one and that is the one I want Win7 to use.

Win7 is a pesky little blighter!

9 more replies
Answer Match 62.16%

Hi all,

I'm trying to run two monitors in Win7 using my Gigabyte z77x-ud3h. If I install NO drivers, I get a mirrored display; if I install either the Gigabyte Intel VGA driver or the native Intel driver, however, I get dual monitor performance... but only when the driver is freshly installed and the computer is still on.

If I restart or reboot, Win7 "forgets" the second monitor and only uses the VGA monitor.

If I uninstall the drivers and disconnect the VGA monitor, Windows will use the DVI monitor with no drivers installed.

But if I install the drivers again, Windows -- even if the VGA monitor has never been connected -- will "use" the VGA monitor and the DVI monitor will stay dark.

Is the motherboard defective? Or is this something about Windows 7?

A:Gigabyte Z77X-UD3H onboard Intel graphics - DVI issues

after the reboot, can you rightclick on the desktop and select "screen resolution" then click on "detect" and see if it then detects both screens, then set them to work how both are supposed to work, click on save and then see if on reboot it works.

9 more replies
Answer Match 62.16%

Hello all,
I'm planning to upgrade from my ancient Intel 82845G graphics card to a new one, but I'm unsure if the new ones are compatible with my motherboard. It's ASRock P4i45GX PE.

As this is my first post here, I can't post links of the motherboard specs. So, you can just google ASRock P4i45GX PE and check it out.

It says something that the maximum graphics memory is 64 MB, but I'm unsure about it. So, are there any geeks out there who can help? I'll be glad.
 

A:Compatibility Issues? Upgrading from Intel 82845G Graphics Card

Hello henson93. Welcome to Techspot.

It seems that your motherboard is based on the Intel 845G chipset. I cannot find your mobo's product sheet anywhere but it's likely that you have an AGP 4X slot. The most powerful AGP card that would be comaptible with AGP 4X is the Radeon HD 4670. However, they cost over $100 and definitely cannot provide the performance levels of newer (PCI-E) cards available at a similar cost.

It would be helpful if you could confirm whether you have that AGP 4X slot on your mobo. Also, what is the reason for your upgrading to a discrete GPU. Are you looking to play games?
 

6 more replies
Answer Match 61.32%

Hi I have a Lenovo Z51 70 Laptop with Intel Core I7 @ 2.40 GHZ , 16 GB Ram , Graphics Amd Radeon R9 M375 4 GB + Intel HD 5500 . The problem is that all the games are playing on Intel grafhics not swiching on AMD to play the games. I went to AMD Radeon Additional Settng, swtich graphic application setting and choise all game application on high performance but still there was no luck on that. I am using Amd software verson is 15.11.1. So what i have to do in order play games on amd graphics please help me in this anyone ? Regards VIsakh

A:All games are playing on Intel HD 5500 not Switchi...

Go to the AMD Catalyst Control Center, and then to Switchable Graphics Application Settings. Open the "all apps" menu, and then select the videogames to run on High Performane. Voila !

6 more replies
Answer Match 60.06%

I have a Levono 330 which device manager says has an Intel HD Graphics 5500 display and the max resolution is 1366 x 768. Not great but adequate.
I installed the Oracle VM 5 (in order to run some old DOS software) and created a virtual XP machine - that was dead easy.

Oracel VM defaulted the XO machine to a small window at 800x600. I changed the screen resolution and it allowed a maximum of 1600x1200 so whooppee, I selected 1600x1200. The screen resolution was visibly better than the 1366x768 that I had under native windows 10. So it would seem that the screen can cope with a higher resolution that 1366x768 - or am I kidding myself!?

So how do I get Windows 10 to let me set a screen resolution of 1600x1200 that I can set in the VM?
Silly boy. I just noticed that the increase dots come from increasing the size of hte screen to a point where it does not all fit on at the same time!! :-(

More replies
Answer Match 60.06%

Hello Everyone, I have been using my new T450 for business purpose but sometime i take a break to play only game FIFA on this laptop. Previously i was using ACER M5 with 4000 graphics and game use to work ok. Here i was strugling with lags and glitches and no smooth rendering was there. I decided to update the graphic driver from Lenovo web site. Now game is not rendering moving or active objects. They apprear as black or shadow. ???? 

More replies
Answer Match 59.22%

fx 5500 graphics card 128 mb can any one tell me if this is able to run the aero effects in windows 7 profesional and any help finding the appropiate drivers needed many thanks

A:fx 5500 graphics card

Vince welcome to the forum.

That card is almost the same as the one you asked about here,

win fast a340 agp 8x

and will use the exact same driver to work in Windows 7.

2 more replies
Answer Match 58.8%

Hi,
I have Dell Inspiron 5000 series 5558 model laptop. Recently i have upgraded to Windows 10 from Windows 8.1.
I have also used driver & download web page on Dell portal to  download & install latest drivers for Windows 10 64-bit OS including BIOS. But the issue is i'm unable to view "Nvidia Geforce 920M display adapter" under desktop-->display settings-->Display-->advanced display settings and it shows "Intel HD Graphic 5500".
I have checked Device Manager --> Display Adapters and i can see both Nvidia GeForce 920M & Intel HD Graphics 5500.
Also under Nvidia Control Panel --> Manage 3D settings -->global settings is set to "High performance Nvidia Process".
Please advice how do i change settings under desktop-->display settings-->Display-->advanced display settings to use "Nvidia GeForce 920M" instead of "Intel HD Graphic 5500".
Nvidia GeForce 920M driver= 359.06
Please advice.
 
Regards,
Prashant

A:How to Switch display Adapter from Intel HD Graphic 5500 to Nvidia Geforce 920M

I'm having the same problem.
Is there any way we could switch to Nvidia graphics processor?

3 more replies
Answer Match 58.8%

Just a quick question,before I buy. If this graphics card has 256bit DDR, and I am going to install this on a machine that is running SDRAM, will there be any type of conflict between the 2 ?
 

A:G force fx 5500 graphics card ?

7 more replies
Answer Match 57.96%

I have an IM845GL mobo and it comes with three pci slots, the problem is that it also comes with an intel 82845GL GMCH as well and i'm not sure about how to install the card. Should i install the PNY NVIDIA GeForce FX 5500 ( PCI ) reguarly or am i suppose to remove the GMCH? Or is there anything else special i should do before installing the card?

A:Can i get PNY NVIDIA GeForce FX 5500 ( PCI ) graphics card on this?

If the intel graphics is integrated into the motherboard,you
can disable it in the BIOS.
If not,remove it.
Make sure you uninstall the drivers for the old graphics
hardware first.

2 more replies
Answer Match 57.96%

I got my computer last June and it came with GeForce FX 5500. I am currently trying to play games such as Half Life 2 and the Sims 2 but it keeps crashing randomly throughout the games.

I have tried drivers 66.93 and 56.72 with no effect. I've turned off background processes and updated other drivers.

I'm not very technically minded but am finding this problem very frustrating and would like it solved...can anybody help me?

Should I maybe think of replacing my graphics card? If so what ones do people recommend?
 

A:Please help, am having problems with GeForce FX 5500 graphics card

Hello, did you overclock your video card?

you say you tried to use nVIDIA ForceWare v56.72 and still fail? your video card sucks, try to get nVIDIA GeForce FX5700LE with 256mb ram or ATI Radeon 9550?

Lucan

P.S. Remember, Doom3 require the mid-end to high-end video class, and sound like you would like to have a budget video. you should have one of this i offered you. Look at tigerdirect.com for latest prices.
 

6 more replies
Answer Match 57.54%

I am planning on getting The GeForce FX 5500 Graphics card to play the Matrix Online. The game requires a DirectX 9.0 capable Card with A programmable Shader, I know the Graphics card is DirectX 9.0 Capable but does it have a Programmable Shader??? And is this graphics card as good or better than a GeForce 3Ti or 4Ti??

Thanks.
 

A:Verto GeForce FX 5500 Graphics Card Questions

The game requires a DX9 compatible card, but it doesn't require a card with DX9 features (like Pixel Shader 2.0). So the following cards would be able to run the game: GF 3, GF 4 Ti (not MX!), Radeon 8500, Radeon 9000 and above, Geforce FX, 6, 7, and the Radeon X-series.
If you want to get a card at a reasonable price, the FX5500 might be a bad idea performance-wise. It's a better choice than a Geforce 3, but inferior to the GeForce Ti 4200/4400/4600/4800 cards. Although the Ti 4x00 series cards dont't boast DX9 features, their performence is better than that of an FX5500.
An FX 5500/5600 card is too weak to give an enjoyable gaming experience in a DX9-heavy game, anyway.

What's your budget?

Depending on your budget, there could be lots of better alternatives than the ones I've mentioned above.
Also, here's a link to the Matrix online FAQ.
 

8 more replies
Answer Match 56.7%

I bought a computer two days ago from PC World and it has a amd a8-5500 apu with radeon(tm) HD graphics 3.19ghz
Which i was told was Quad core and I've searched the cpu online and it still says it has four cores but my computer only see's one core and 3rd party software like cpu unparking programs only see that i have one core. Now i need to know if this is a software malfunction or if the hardware is screwed and i should go back to PC World and give them hell and demand a replacement.
Or if there is some other way i would be able to fix this so it can see all core and if all cores are even working.
Thanks
chris
 

A:Quad core CPU amd a8-5500 apu with radeon(tm) HD graphics 3.19ghz Only registered wit

13 more replies
Answer Match 55.86%

I have an issue with my logitech z-5500.
I just upgraded to win7 pro and in realteks audio setup I can hear sound from all my speakers when I have the control unit on 6ch direct. But when I use any kind of mediaplayer it comes out in stereo.
I used to run winXP and never had the same problem. I also had realtek drivers then and had it set on 5.1 in the setup. And no matter the mediaplayer I used in XP it always came out of all speakers when I had the controlbox on 6ch direct.

I use the onboard sound on my computer.
It's a Asus P8H61-M Pro Rev 3 motherboard.
In the manual it says it's got an ALC887 8-channel high definition audio codec.

How can I get it to play on all speakers?? plz help.

A:Logitech Z-5500 audio issues.

Have you downloaded the correct sound driver from ASUS? If not give that a shot
HERE is the ASUS downloads: ASUS - Motherboards- ASUS P8H61-M PRO

3 more replies
Answer Match 55.44%

When i install drivers for my geforce fx 5500, it really messes up my computer. Whenever i play any game, everything starts flashing different colors, and the entire screen look like shards of multicolored glass. And when i am on the internet or sumthin like that, it starts to freeze, then after about 10 seconds the screen goes black, and then it comes back on and unfreezes. It did about every 30 seconds.

Then when i uninstall the drivers, everything is fine, except their are some things i cant do without drivers

Thanks!
 

A:Driver issues (nvidia geforce fx 5500)

plz people i really need some help with this
 

6 more replies
Answer Match 55.44%

hi,thanks for reading! please help me  my problem is i cant control brightness.the story is:when i installed win 8.1 32 bit.i cant control brightness. and i cant install intel hd graphics. it's said the driver isnt supported for the version of windows.so i install windows 10 32 bit. and it auto function. i could control the brightness. but win 10 still to much bug. many think happen. so i decided to go back win 8.1 32 bit. what i do:do anythink that listed on google.1. like go to device manager then delete graphics driver. (only microsoft basic display adapter) nothing happen2. update framework 3.5 and 4.53. on device manager on 'monitor' only 'generic pnp monitor'4. i update win 8.1 until its get to upgrade to win 10.so what must i do next? my question is:1. is my laptop not supported for intel hd graphics? if not support so what must i do?2. what the problem on win 8.1?why i could normally control brightness in win 10 but nt in 8.1?3. whatever i do its kinda delay. and laggy. maybe because the driver?idk thisthe brightness really really make my eye sick2 weeks since i buy this laptop and its make me sad!! please help me!thanks for any reply!

A:hp 14-ac003tu cant control brightness & install intel hd gra...

Hi: HP only supports your notebook for 64 bit operating systems. There are no 32 bit drivers available.

3 more replies
Answer Match 55.44%

hello
i think this is the 4th or 5th time for me to face this problem
the screen brightness is stuck at a low level and i can't change it
every time i have to uninstall the driver and install an older version
although i don't update this problem occur
it there any permanent solution ?

A:intel HD4000 screen brightness problem

Try the 3304 drivers. I've been using them for quite awhile with no problem. Found them on HP site, hopefully they are cross platform generic ones: Intel High-Definition (HD) Graphics Driver | HP? Support

PS: Make sure you have function button software installed if you manufacturer provides one.

5 more replies
Answer Match 55.02%

Datorn kan inte uppdatera:
Intel Corporation driver update for Intel(R) HD Graphics 4600
Installationsdatum: ?2016-?07-?31 21:47
Installationsstatus: Misslyckades
Felinformation: Kod 80070103
Uppdateringens typ: Viktig
This driver was provided by Intel Corporation for support of Intel(R) HD Graphics 4600

More replies
Answer Match 55.02%

Hi...I'm running Win7 Home Premium (64-bit), 8Gb RAM, with the chip:
Intel Core i7 2600K @ 3.40GHz
Sandy Bridge 32nm Technology

Graphics is not dedicated and is handled via this Intel chip.
During Windows Updates, MS ones download perfectly.

However, I also get an additional 'optional' update named: 'Intel Corporation - Display - Intel(R) HD Graphics'

This has never succeeded in downloading.
The MS explanation is always the same: possible interruption from my connection to their server...yet never any interruption when I download MS updates at exactly the same time!

After that, I get the usual 'download Mr Fix It' software which proves itself to be utterly useless in helping me find why the download is not succeeding.

I run Avast anti-virus and Zone Alarm firewall...but I can't figure out if they are somehow preventing the download.

I'd appreciate any help on this....

Many thanks

A:Intel Corporation - Display - Intel(R) HD Graphics - UPDATE FAILURE??

Hi again...forgot to mention: Code Error: 800F0203 is what shows, but may as well be in Klingon...

9 more replies
Answer Match 55.02%

I got my HP Notebook - 15-r111nia late last year and want to update the graphic card driver as it is very old (10.18.10.3958) since 2013, to a newer version. I tried using the Intel Driver Update Utility to automatically update it to the newer version but it saying a customized computer manufacturer driver is installed on my computer and so the download button is greyed out. I tried updating the graphics driver manually but it failed to install successfully after downlaoding on several attempts. I am soo fraustrated  now as most of my games are crashing and every recommendations i get from people is to update my graphic card. I would really appreciate anyone kind enough to help me with a link on the right graphic driver update and a work around concerning this issue.  Thanks in advance.

More replies
Answer Match 55.02%

I have been unable to install this. 80070103 Unknown error
How important is it and would there be any way to hide it if necessary?

Intel Corporation driver update for Intel(R) HD Graphics 4400

Download size: 147.0 MB

You may need to restart your computer for this update to take effect.

Update type: Important

This driver was provided by Intel Corporation for support of Intel(R) HD Graphics 4400

More information:
http://sysdev.microsoft.com/support/default.aspx

Help and Support:
</title> <link href="//www.microsoft.com/favicon.ico?v2" rel="shortcut icon" /> <link href="//az623152.vo.msecnd.net/cdnresources/2.35/content/smccss.css" rel="stylesheet" /> <script src="//ajax.aspnetcdn.com/ajax/jQuery/jquery-1.9.1.min.js"> </scrip

More replies
Answer Match 55.02%

So I have been having issues with my Intel HD Graphics Driver constantly crashing on my computer. Whenever it crashes it says that it is the Windows 8 driver. My computer runs Intel(R) HD Graphics 4600. Because of this, I want to replace it with the new Intel HD Graphics 15.40.18.4380 from Intel. The problem is that my system won't recognize it. What do I do?

A:Replacing HP Intel Graphics Driver with Generic Intel Graphi...

Nao298758 Hello;Allow me to welcome you to the HP forums!I read your post about Intel Graphics Driver problems and wanted to help. This is the software and drivers page for your PC:  http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5405166&swLangOid=8&swEnvOid=4192 If Windows 10 does now show when you open that page, then select it under Operating Systems. The video driver you want to download and install is under Driver-Graphics.Good LuckI am a volunteer and I do not work for, nor do I represent, HP.========================================================================If you feel my suggestions helped you, please click the Thumbs-Up symbol to say thanks!If they helped resolve your issue, please click "Accept As Solution" to help others find similar information.

1 more replies
Answer Match 54.6%

terran219 wanted a modified Intel Series 4 graphics driver for his Windows 8 Consumer Preview.
So, I'm going to just leave this here for those who want it. Enjoy.

I've Also uploaded the Intel HD First Generation Driver for windows 8. It's a modified windows 7 driver.
If you have one of these devices and can't install leave a post with your computer model and Hardware ID's.

Install This First: The Custom Certificate Installer
To install the signed drivers run the custom certificate installer I made which is based off of barcher's Post.

I've recently updated my certificate installer to v3.0. This include 2 certificates which allows the updated Mobile series 4 and has some handy options for your pleasures. A WaterMark Removal option has been added for Windows 8 Pro.
~WATERMARK REMOVAL IS BETA. Use at your own risk~

-Custom Certificate Installer- Chrome users may experience a malicious warning. It is false. Virus Total
MainMirror

Drivers
-Make sure to download the correct driver for your device.
Intel HD Graphics 1st Generation
UPDATE COMING EVENTUALLY

-Version 15.22.57.2827- SIGNED MediaFire
This is the Windows 7 Driver, but modified to install on 8
64bit Intel HD First Gen x64_2827.exe
32bit Intel HD First Gen x86_2827.exe

-Version 15.​22.​54.​2622- SIGNED Google Drive old version
64bit Intel HD First Gen x64_2622.exe
32bit Intel HD First Gen x86_2622.exe

Mobile Intel Series 4 Driver

-Version 8.15.10.2869 ​v2- S... Read more

A:Mobile Intel Series 4 and Intel HD Graphics 1st Generation

Works Great to me. ! Now I can run minecraft ! =)
Intel GMA 4500MHD

more replies
Answer Match 54.6%

Is Intel HD Graphics Family better than Intel G41 express chipset?


The name is only Intel HD Graphics Family there isnt a number after it in dxdiag

A:Is Intel HD Graphics Family better than Intel G41 express chipset?

Intel G41 express is the very old, Core 2 equivalent on-motherboard-gpu aka Eaglelake. It only supports up to dx10, it has awful and old drivers, and incomplete opengl support (less apps can run on it). It can idle in recent games like Dota 2 with up to 30fps with everything on low. Key word: idle. Don't even think about playing under more than 15-20fps.

Intel HD Graphics Family is on-cpu-die-gpu aka Sandy Bridge, it's still old now, but does have support for dx11 and opengl, and it has a lot more raw power than x4500(g41), depending on the cpu. It even supports overclocking with sizeable improvements.

Really there is no contest between the two families.

2 more replies
Answer Match 52.5%

I recently purchased an Acer Veriton (M498G) desktop which has an i5-650 processor, Windows 7 Pro (64 bit) and Intel HD Graphics listed as the video card. I also purchased a PNY nVIDIA Quadro FX 380 PCI-E card for improved picture editing and home video viewing and editing. I have already replaced the original 300 wattt power supply to a 430 watt Antec Truepower I had on hand and boosted the RAM to 8 gigs from the original 4.

Question 1) Am I getting any improvement in visual quality or system speed with the Quadro or is it a waste of money and I should just save up to buy a bigger video card? This card was on sale for $115.

If I am getting improvement then I need to ask another question.

Question 2) Instructions for the Quadro installation are as follows...

1--Uninstall the existing VGA driver.
-Remove the existing Display Driver via "Add or Remove Porgrams".
-Shut down your computer.

2--Remove your Existing Graphics Board (or Disable Integrated 3D Graphics Controller).

skipping instructions on how to remove existing graphics board

-Systems with integrated (also know as on-board) 3D graphics may require you to disable the integrated 3D graphics system. Consult the owners or vendor manual that came with your PC on how to properly do this.

So how do I disable the onboard? just uninstall the driver? The only driver I can find on the uninstall menu is "Intel Graphics Media Accelerator Driver" does this sound correct? I did find the option in BIOS and ... Read more

A:how to disable Intel HD Graphics to install PCI-E graphics card

It's likely to be an improvement, but check it and see.
Onboard graphics are disabled in the BIOS (Try looking under "Integrated Peripherals" or something similar.
You probably don't need to do this, but it's nice to know how.
 

1 more replies
Answer Match 52.5%

I'm running a dell inspiron 1545 (vista 32).

When trying to open the intel graphics driver properties it won't open (no error message)
When I try to change the display settings I get the error message "the currently selected graphics driver can not be used (written for a older version of windows)
When I run dixdiag I get the error that direct input isn't responding.
I tried to download drivers from intel but I got the error message that my machine doesen't meet the system requirements (I'm not entirly sure I picked the right software)

All the drivers from the dell site appear to do nothing and I've updated from direct 9 to 11.

Still no fix

If anyone can help me fix it give me your email and I'll gift you a itunes voucher or something, this problem is causing huge problems for me.

Much appreciated
 

A:Graphics driver/ intel graphics accelerator issue

7 more replies
Answer Match 51.66%

All the drivers have been installed sucussfully except graphics driver as brightness control is not working. please provide solution. these are the hardware IDs of AMD Radeon HD7600M series PCI\VEN_1002&DEV_6840&SUBSYS_1840103C&REV_00PCI\VEN_1002&DEV_6840&SUBSYS_1840103CPCI\VEN_1002&DEV_6840&CC_030000PCI\VEN_1002&DEV_6840&CC_0300 Thanks in advance. 

A:issue regarding graphics driver and brightness problem

Hi: There is no W7 32 bit driver for the Intel/AMD switchable graphics your notebook has from anywhere. Your only option would be to install W7 x64 if you want the graphics to work again.

2 more replies
Answer Match 51.66%

Recently Brought Hp 15-ay005TX notepad. Installed with Windows 10. I downloaded and installed the grapics drivers shown in the hp Website. Installled  AMD/Intel Switchable Graphics Driver and Intel High-Definition (HD) Graphics Driver. Tried multiple times Reinstalling .  When I Tried to open The Radeon setting it shows this. I cant find anything else. 

More replies
Answer Match 51.66%

Im guessing this is the right place. any way ever since i restarted my computer for windows updates. A message keeps coming up when i start my computer saying the error. It also comes up when i use certain programs. One thing i noticed was that ever since i restarted for the update three things aside from the error have happened. Since then My screen is always shakey/twitchy and it really gives me a headach, and a blue icon that says Intel Extream Graphics came up. However whenever i right or left click the icon i get the message then as well. aside from both of those, my screen would occasionally black out and come back up at random intervals. these annoyances are really starting to bug me and if anyone has any aid it would be greatly appreciated.

P.s sorry if theirs bad grammer, keyboards acting up
 

More replies
Answer Match 51.66%

I have tried multiple times to get this update to download and keep getting the same error code. How do I fix this or is it really necessary for my Windows 7 Home Premium?

More replies
Answer Match 51.66%

Hi there !

I will soon build new computer configuration and i'm using Windows 10 Pro 64bit version.
At the moment i have Asus R5 230 pci-e 1gb DDR3 graphic card.
So, my question here is,
is it for example Intel i7 HD Graphics 530 enough for using just application (audio processing) or should i keep my Asus R5 230 pci-e graphic card.
What is more recommended, for just using applications ?

Thanks for your suggestions and thoughts

Best,
Matej

More replies
Answer Match 51.24%

I just picked up an HP dx2000 desktop computer that has the "Intel Extreme Graphics 2" onboard video card. Im trying to play World of Warcraft on the machine and it is a bit jumpy due to what I assume is the graphics card. The system has 1Gb of RAM so I dont believe it has anything to do with the RAM.

My question is, will my system benifit from a PCI graphics card or is the bus too slow for PCI to show any type of improvement? The only reason I say PCI is because the system does not have an AGP slot.

Thanks!
 

A:Intel Extreme Graphics 2 VS PCI graphics card

8 more replies
Answer Match 51.24%

Hello!
There are countless threads with people who can't change brightness on Windows 10. Easily solved, switch to the generic Windows graphics driver. However, to me this solution removes the Sleep option in Power menu. Only Hibernate is left, but I don't want to use it. I just bought a small SSD for the OS and I want to save the write cycles.

So as the situation stands, I can either choose to have the Sleep option with Intel Graphics 4000 driver, or have the brightness control with the Windows graphics driver. I chose the former, because I use sleep a few times a day, but don't change brightness very often. But I want both.

I am just checking, is there any option to have both sleep power setting AND working brightness control in Windows 10? Is Microsoft or Intel working on fixing the problem?
- I use two graphics drivers at once - NVidia and Intel 4000. Can't have just NVidia, that removes both brightness and sleep.
- Yes, I have the latest Intel 4000 driver.
- Yes, I have disabled adaptive brightness.
- No, I can't adjust brightness manually, if I try that, the screen is totally dimmed and I have to switch the drivers to fix it.
- I have Lenovo Z500, Windows 10 with the Anniversary package - didn't help.
- I made a clean install of W10 after my old W10 install got stuck in update-remove update loop.

More replies
Answer Match 50.4%

I cant be able to turn up or down my pc brightness. i upgraded it to Windows 10 pro. Will be kind of you to send me a link to the driver to correct this.... here are some key info. you may need. WINDOWS 10 PRO64bitsOS,INTEL (R) CORE(TM)i3-4005uCPU @1.70GHZRAM 4GB

More replies
Answer Match 49.56%

I've had my U430 for two years now, but I've the brightness and general 'punchiness' of the screen has been low, but I don't remmeber it being this way before. It is especially noticable when the laptop is next to an iPad or mobile phone, with the whites on those screens are much whiter, while the laptop looks grey in comparison. The screen brightness is set to full on the slider within Windows and using the hotkeys on the keyboard. Restoring  the laptop hasn't resolved the issue. Any help would be very much appreciated!
 
I've attached a photo to help demonstrate my issue.
 
I have the i7 u4510 model with touch.
 
Mod's Edit: Additional information added to Subject line for clarity of issue.
 

























1458700108984.jpg ?142 KB

More replies
Answer Match 49.56%

Hi, I've had my X1 Yoga for about two months now, running Windows 10 Enterprise Insider Preview 1607 (build 14915.1000).Prior to joining the Windows 10 Insider Preview program (it took about a week for it to update to the insider preview builds from the official builds), I had severe issues with the brightness control of my OLED screen. I could not turn the brightness up to the higher settings (90-100%), because the screen would become entirely black. Also, somewhere in the range of 75%-95% brightness, the screen would be completely blue, as if no other colors were displayed in the OLED panel.This was of course unusable. Coupled with the automatic display brightness adjustments it gave a really crappy experience, as the brightness could suddenly automatically be turned up really high (into the unusable blue-then-black range), unless the display was set to a really low brightness setting. On several occasions I thought the computer had locked up/died on me after disconnecting it from my OneLink+ dock, only to later realize that I could just lower the brightness to force the display back into actually showing something.  Sometime after getting the first Insider Preview builds, which was also accompanied by some Lenovo updates (unfortunately probably masking what is the real cause of this issue), I noticed I couldn't actually change the display brightness at all anymore. It's stuck! This issue persists, and I have been unable to change the disp... Read more

More replies
Answer Match 49.56%

I recently upgraded my ATI Radeon HD 4850 to a GTX 560 ti. After swapping out the hardware I removed my old ATI drivers ( with some difficulty. CCC didnt want to go for some reason but after updating to the newest CCC i was able to uninstall ), then I went to the Nvidia website and downloaded new drivers for the 560. I was also forced to buy a new power supply as my old one could not support the new card, I went with a corsair TX 750w because it had extremely good reviews on newegg. Since these changes I have been having an issue where the brightness on my monitor dims when I'm playing certain games and I come to dark areas, or go into the game menus. Ive noticed this on Crysis, Crysis Warhead, Dead Space 2, and Mass Effect 2. Right now I have Crysis Warhead loaded, and I've got it sitting in the "Options""System Settings" menu, under "Graphics" and my brightness is pulsing in and out, slowly getting brighter, then fading (possibly to the game music?). With other games when you enter a dark hallway for example, the screen will fade so dark you can barely see, then come back once you progress farther thru the game. At first I thought this was just an issue with the new video card so i sent i back only to find that wasnt the problem =(. Ive since hooked my computer into my HD LED/LCD TV and the problem seemed gone, so I went and bought an LG w2240, and the problem is back. Im really at a loss here, I've removed all my Nvidia drivers,... Read more

More replies
Answer Match 49.56%

In the last week I've been having two new issues with my computer that I hadn't previously experienced. The major one was related to my wireless adapter and with the help of others on the network connection forum have discovered it was being caused by a conflict with Norton 360.

The second is related to my screen auto dimming the moment of my first key strike when entering my password. I am running a HP pavilion dv6t-7000 on Windows 7. I have turned off the power saving feature on my Intel graphics control panel. Any ideas on what could be causing this would be much appreciated as it is annoying to have to adjust the brightness every time I turn on the computer.

Thanks.
 

A:Issues with screen brightness during startup

Does it react the same plugged in or with battery only?
 

1 more replies
Answer Match 49.14%

Hi, I just want to ask what is the similarity of NVIDIA GeForce FX 5500 and INNO3D GeForce FX 5500 ?and also their difference ..

thnx ...
 

A:NVIDIA GeForce FX 5500 and INNO3D GeForce FX 5500 Comparison

They are both the same card... specs can be found here.

Performance will differ via bus type (AGP or PCI) but they are both 5 series nvidia-based cards.
 

2 more replies
Answer Match 49.14%

I bought this PC recently and have been very pleased with it. Adapting to Windows 8 was quick and effortless for me, and I have very few qualms about it.

However, I shut down last night and when I booted up this morning, my display is different than it was before. In fact, it's quite confusion. Some areas are darker than they should be, and other areas are washed out or too light. This points it to being that somehow my contrast has changed - but how? I can find no contrast controls anywhere. There are no buttons my PC for these settings - as this is an all-in-one PC. The brightness slider changes nothing.

Some things look "normal" while other things are just too saturated, too washed out, or too contrasted.

Is there a way to set it back to default? A way to change my contrast? I'm an artist and this change in screen depth is unsettling for me - as in all calibration tests, I can see the difference between shades of black, but white is simply... white. There are no shades of white on this screen, now.

Edit: It's especially anything yellow. There is very little shading between colors of yellow right now. On my color slider, everywhere there's a hint of yellow is just... yellow, with no gradual changes into the next color(s).

Edit again: I improved it only a little by turning the gamma down slightly and playing with color sliders, but it's still far from what it should be. I have no idea what changed my settings or how to get it back exactly as it was.

More replies
Answer Match 48.72%

well hello there guys!!

this is my 1st time that i post in this forum and i am frustrated with something.
I have recently restored my windows after a malfunction my laptop had (hardware problem :P)
i have brightness issues and i dont know how to fix it.
can somebody help me?

A:Brightness issues after restoring windows DELL laptop

If you have graphics driver installed you can try to figure out it from your keyboard. (It may - hold "Fn" key and press repeatedly "F4" or "F5" or Up/Down Arrow key). You will find the key in your keyboard with brightness sign. Or give the model no your Laptop.

10 more replies
Answer Match 48.72%

ON MY DELL INSPIRON E1505: the FN key doesn't work to activate the contrast and brightness shortcut keys on my laptop. This laptop is like 4 years old and barely used so I have no idea where the owners manual is.

Can somebody help?

Thanks

A:Contrast and brightness issues dell inspiron e1505

Press <Fn> and the up-arrow key to increase brightness on the integrated display only
http://support.dell.com/support/edoc...m/MD4024MR.pdf

1 more replies
Answer Match 47.88%

Hi,

I've completed a new custom build, but have had problems with BSOD from the beginning with any installation of Intel Graphics drivers or the installation of any graphics card.

When I first completed the build, the XFX-7950 Black was installed. I booted to BIOS without issue, but when I inserted the Windows 7 (64 bit) it would boot through the windows logo screen but immediately BSOD right after going to the first install screen.

I removed the graphics card, and was able to complete the full Windows install without issue. I updated Windows and the drivers on the system but as soon as I installed the Intel 3000 Graphics driver, it would BSOD on every restart. I recovered back prior to the Graphics driver install and installed all other drivers. I updated the BIOS to the latest version.

I have reattempted the XFX 7950 multiple times in different slots, but with the same results. I also attempted my Radeon HD 4550 from my old computer but it gave the same results. It always boots through the Windows logo screen, but BSOD within a few seconds of reaching the password screen.

I broke down and installed Driver Whiz, which did detect multiple outdated drivers that I had not caught, but none of these fix the issues.

I've attached the requested zip. I don't think all BSOD's are showing up, as I've had to use recovery points after installed drivers didn't work. The last .dmp on 19 JUL was a Intel Graphics driver install attempt that I pulled off in safe mod... Read more

A:BSOD with install of Intel Graphics driver or install of graphics card

I recommend for future reference never to use driver discovery software like Driver Whiz. They have a propensity to install erroneous, buggy and/or outdated drivers. Finding drivers for your hardware should always be done manually.

Anyways, while I don't see any specific pattern for the crashes, I do see at least some of them are during disk I/O. That's when I immediately got suspicious of your Crucial SSD. If you have not already, the very first thing you should do when installing an SSD into a PC is to update your SSD's firmware, followed by your BIOS and any chipset/disk controller drivers. This is necessary as initial SSD firmware often has a habit of causing issues, which frequently is resolved when updating it.

If that all doesn't work, then it's time for some other hardware tests. Start with 7 passes of Memtest86+, followed by Torture Test on Blend for 9+ hours with Prime95. If those don't turn up anything, then replace either your motherboard (most likely culprit) or your SSD drive.

3 more replies
Answer Match 46.62%

Hi everyone I'm new to the forum
I just bought an old ThinkPad T410 with the i5 520M and upgraded it to windows 10.
But right now I can't install the Intel HD Graphics Driver to it. I've looked around a bit and now I'm quite worried that it's not supported at all for the 1st generation or i5 to have a windows 10 driver...
Any help is much appreciated

A:Need help with Intel HD Graphics

Hello Davenport Welcome to the Windows Ten Forums. I believe that if that would be supported by Windows 10 they would have a driver on the site of the manufacturer. I am not that familier with that model of laptop so I am passing this on to the next available person. Stick around and I'm sure someone will help you.

0 more replies
Answer Match 46.62%

What is the version of my Intel HD graphics in my lenovo s20-30 and does the dedicated video ram matters in gaming?
 
Will updating my graphic drivers will make my integrated graphics card allot more gram during gaming?
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

More replies
Answer Match 46.62%

Today i just buy Acer ES1-511-C3KV i download the auto update infinity tool to instal graphic driver , the tool download the driver but i got that error WHAT I NEED TO DO I DONT HAVE THE GRAPHIC OPTION IN BIOS. I have windows 7 32 bitsI get error Your computer does not meet the minimum requirement for installing the software when i try to install hd display drivers.











Solved!
Go to Solution.

A:Need Help with Intel HD Graphics

Hello, Your laptop works normally under Windows 8.1-64 bits.On the Intel website, I found this documents about Celeron N2830: "Note: 1 Microsoft Windows 7 operating system is not supported on Celeron« Processors J1750/J1800/J1850/J1900/N2805/N2806/N2807/N2808/N2810/N2815/N2820/N2830/N2840/N2910/N2920/N2930/N2940 with Intel« HD Graphics and Pentium« Processors J2850/J2900/N3510/N3520/N3530 with Intel« HD Graphics"

5 more replies
Answer Match 46.62%

What is the version of my Intel HD graphics in my lenovo s20-30 and does the dedicated video ram matters in gaming? Will updating my graphic drivers will make my integrated graphics card allot more gram during gaming?

More replies
Answer Match 46.62%

Hi,

I got a Intel Graphics Media Accelerator HD and my windows rating is 4.0.
Gaming graphics:5.1
Graphics: 4.0

Is there any way to increase my windows score higher without upgrading my graphics?

A:Intel« Graphics

Nope.

~Lordbob

1 more replies
Answer Match 46.62%

The intel intregrated graphics chipset gm965 x3100 onboard graphics,
does anyone use this and if so is it capable of running vista aero with ease?

A:Intel Graphics

http://www.intel.com/products/chipsets/GM965/index.htmSometimes it is quicker to go right to the source.

1 more replies
Answer Match 46.62%

Hi there!!!Ok, so I was guided here:http://www-307.ibm.com/pc/support/site.wss...ocid=MIGR-50885and unfortunately , I am unsure of which driver to download... My operating system is an Intel EMachine, model T1742, running on XP, please let me know if you need more information and as to which driver I require...Thank you so much!!!

A:Intel Graphics

Hi didleyde.Your link leads to the IBM site, not even close. Go here, click the + next to "downloads" near the bottom of the page. All the original drivers are there.If you have reformated this system, download and install the chipset driver firstIf all you need is just the video driver, indicated in your topic, self explanitory.

5 more replies
Answer Match 46.62%

Do intel graphics drivers have digital vibrance control adjustments like in nvidia graphics drivers?

A:dvc for intel graphics

  
Quote: Originally Posted by adewale2


Do intel graphics drivers have digital vibrance control adjustments like in nvidia graphics drivers?


I dont think so, but would need to know the specific model

3 more replies
Answer Match 46.62%

I have a laptop...What about this graphic card? i know it crap, can I upgrade it?

A:Intel HD Graphics

No. There really isn't any way in current laptops to upgrade your graphics card. What you buy is what you get unfortunately. Although some companies have been trying to develop peripheral graphic upgrades, they have yet to really deliver a product.

9 more replies
Answer Match 46.62%

after installing a fresh copy of windows on my device I noticed that my graphics adapter under device manager was only showing the stock Intel HD adapter with no AMD devices in sight.

I have tried relentlessly to solve this issue but with no luck. I have:

Installed all drivers from the Toshiba website
tried using drivers from AMD
Updated chipsets and BIOS
Installed windows 7 through to 10 and back to 8.1 (stock OS that came installed)
adjusted BIOS settings (no option for graphics only very basic settings)
Cleared CMOS
Adjusted power settings

At this point im kicking myself that I didn't keep the original recovery partition. if I had that at least I could find out if the chip is dead or not.
AMD auto driver detection nor GPU-Z picks up anything else but INTEL HD
Help?

More replies
Answer Match 46.62%

Today i just buy Acer ES1-511-C3KV i download the auto update infinity tool to instal graphic driver , the tool download the driver but i got that error WHAT I NEED TO DO I DONT HAVE THE GRAPHIC OPTION IN BIOS. I have windows 7 32 bitsI get error Your computer does not meet the minimum requirement for installing the software when i try to install hd display drivers.










Solved!
Go to Solution.

A:Need Help with Intel HD Graphics

Hello, Your laptop works normally under Windows 8.1-64 bits.On the Intel website, I found this documents about Celeron N2830: "Note: 1 Microsoft Windows 7 operating system is not supported on Celeron« Processors J1750/J1800/J1850/J1900/N2805/N2806/N2807/N2808/N2810/N2815/N2820/N2830/N2840/N2910/N2920/N2930/N2940 with Intel« HD Graphics and Pentium« Processors J2850/J2900/N3510/N3520/N3530 with Intel« HD Graphics"

5 more replies
Answer Match 46.62%

For some reason I cannot install Intel Graphics chipset or the media acceleration for windows 7.

Plz help.

A:INTEL Graphics help

  
Quote: Originally Posted by Blueyesto


For some reason I cannot install Intel Graphics chipset or the media acceleration for windows 7.

Plz help.


Welcome Blueyesto to the windows 7 forums.

It might help if you would fill out your system specifications so that anyone can take a look at what model of computer you have? like is it a laptop? or a workstation or whatever.

would help.

Rich

5 more replies
Answer Match 46.62%

Hi,

I recently downloaded 3DMark to see what my new computer could do.
I was however, dissapointed with its performance. It was getting 5-10 FPS on the extreme 3dmark setting. When the test finished, i realized it ran on the Intel Graphics Media Accelerator instead of the GTX 580.

I want to disable the Intel Graphics Media Accelerator completely.
I googled it, but all i got was laptops results ( optimus problems ), and i also searched the bios a little, but i didn't want to screw around with the settings that i didn't know the result of.

I tried disabling first and when that didnt work i uninstalled it from device manager. It still is getting mediocre results on 3DMark, so i'm assuming its still being used?
Thanks,
Alex.

A:Intel HD Graphics

I noticed you have a i7 2600k and I understand when you couple it with a Z68 mobo. Your virtu feature is supposed to switch the graphics engine to whatever is best, depending on the application you are running, the Intel HD Graphics 3000 on the chip or the video card. There must be a way to temporarily disable the graphics on the chip so that the video card is being used in your test. Just an idea. Check with the mobo's manufacturer's web site to see if they have the info you need.
Good Luck

2 more replies
Answer Match 46.62%

I keep getting the VDR TDR Failure (igdkmd64.sys) error.  I open up the Intel Driver Update Utility & it states that it cannot update the driver.Error:  A customized computer manufacturer driver is installed on your computer.  The Intel Driver Update Utlity is not able to update the driver.  Installing a generic Intel driver instead of the customized computer manufacturer driver may cause technical issues.  Contact your computer manufacturer for the latest driver for your computer. I have  version 15.40.25.4463 of Intel Graphics Driver for Windows 10. How am I to update this driver?  This is extremely frustrating.  Why would you make a product that is difficult to update? JPaw 

A:Cannot update Intel Graphics 520 Driver using Intel Driver U...

This is NOT official HP Customer Support and I, as most other persons on this forum, do not work for HP. This is a peer-to-peer user supported forum for HP products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's. It appears you have the latest production release of the Intel Graphics Driver for Windows 10. The only other driver listed on Intel's support website is 14.40.26.4474 which is a BETA version. This BETA driver doesn't appear to address the issue you are having. HP hasn't made it difficult to update the driver. The Intel driver installer is what is telling you it can't install the driver. This is because there is a customized version of the driver on the computer and replacing it with a generic driver may cause issues or loss of functionality of the hardware. If you have any further questions, please don't hesitate to ask. Please click the White KUDOS "Thumbs Up" to show your appreciation

1 more replies
Answer Match 46.62%

After updating to W10 insider fast ring build 14393.10 on my Lenovo G580 notebook, the Fn+Up brightness control key combination has stopped working. To check if Fn+Down was working, I pressed them and the brightness went down to "0" and now the screen is always black both while plugged-in and unplugged. Hence, I'm not able to increase the brightness anymore.
FYI, the "Up" arrow button works normally but the combination "Fn+Up" doesn't work while "Fn+Down" does.
Safe Mode doesn't allow adjustment of brightness since it cannot load the display driver.
I tried installing a third-party brightness control software while in Safe Mode but then realized it won't work until I log in to my account, in normal mode, which I cannot do since the brightness is at zero.
Please help me asap!
PS:- I have managed to increase the brightness for now but still the combination isn't working. Fn+Left arrow key combination also not working for volume down while Fn+Right arrow for volume up is working.

A:Fn+Up brightness control not working after updating to W10 build 14393.10. Brightness is at zero.

you can change brightness settings from settings itself instead of using the keys - just to make things easier

4 more replies
Answer Match 46.2%

Hello peeps,
so... I play this online game (silkroad online) and after some update i started getting disconnected from the server after some 5 or 10 minutes, i tried everything to fix it but nothing helped so i downloaded this awesome program " Process monitor" that reports everything happening on my computer and i was watching the processes updating everything shows results success until i saw this line with "Name not found" result few seconds before i disconnect again;
sro_client.exe 3196 RegOpenKey HKLM\Software\Intel\Intel Graphics Accelerator\D3d NAME NOT FOUND Desired Access: Read, Maximum Allowed
i tried to find this registry but it doesn't exist, so i reinstalled the driver again, updated inf files too but i can't find it, on google it doesn't show any result.. if anyone know what's the problem and how to fix please let me know.. thank you
 

More replies
Answer Match 46.2%

Hello,
I do not own a gaming laptop but have recently acquired a game and wish to play it on my Toshiba C50-B. My only problem is that my laptop is running on what I have heard is the worst of Intel's HD integrated graphics chips. Driver version 10.18.10.3408. it has no model number and I think it is a 32MB card. Is there any way of either replacing the card with the newest version, or upgrading the software or anything that can possibly make it any better?

Thanks!
 

More replies
Answer Match 46.2%

Hello People!I'm trying to fix a major problem but after many hours of sitting in front of my laptop screen, I still can't find a solution. My laptop is a HP EliteBook 8460p (refurbished) Cpu: Intel Core i7-2620M vProRam: Corsair VALUESELECT SO-DIMM DDR3 16gb PC3-10700 Dual Channel KitGPU: Intel HD Graphics 3000 ???OS: Windows 7 Pro x64  Everything was so fine without any problem until I decided to upgrade ram. There were 4gb of DDR3 pre-installed memory. Then I replaced them with 16gb as you can see above. In order to use new memory I should re-install windowsbecause the pre-installed OS couldn't boot into windows environment. I re-installed windows 7 pro x64 and then everything seemed to be right. However everything changed when I had to install graphics drivers. I tried every method and every site (hp, intel, windows) and most of graphic drivers versions. The problem is that most times windows crash and reboot just after welcome screen (sometimes before it) of some seconds later. Without graphics driver, using Standard vga adapter everything goes fine but the screen quality is too low and I can't use applications that use graphic hardware accelaration. I don't remember if specs of my refurbished EliteBook included extra discrete graphics card like other EliteBook products. Besides device manager doesn't detect something like this. Unfortunately I hadn't noticed driver details of the pre-installed OS. I need my EliteBook at my job, so I need to find... Read more

A:Intel HD graphics 3000

Here is the Service Manual: Manual You have either Intel HD 3000 or Radeon HD 6470M, but I think the real problem is that you may have installed incompatible memory. The dead giveaway was that when you rebooted after installing the new memory the OS would not load. Compatible memory should "just work", not require a reload of the OS.  This is the correct memory: 8-GB (PC3-10600, 1333-MHz, DDR3) 634091-001 https://www.amazon.com/Kingston-Technology-Notebooks-KTH-X3B-8G/dp/B007BPOHLK/ref=sr_1_1?ie=UTF8&qid... Is this what you bought? http://www.newegg.com/Product/Product.aspx?Item=N82E16820233216  

2 more replies
Answer Match 46.2%

So i tried to update graphic driver with Intel(R) Driver Update Utility 2.0 but the upgrade failed and now my screen resolution is lower an i can't play any games.. Tried to install a bunch of other drivers, of course it was pointless, even tried driver solution pack but nothing seems to work.. Meybe someone can help with this..

Any help would be aprreciate, couse i don't have any idea how to fix this.
P.S. sorry for bad language skills

A:Intel HD Graphics driver

You Can Roll Back the driver to the old driver, if the new driver was installed. Go to the Device Manager, Click the Properties for the Intel HD Graphics then Click the Driver Tab.

Another possibility is to use the System Restore function and restore the PC to an available restore date that is BEFORE you did (or attempted) the driver upgrade.

3 more replies
Answer Match 46.2%

Hello,

*UPDATE: I used AMD removal tool to remove any trace of AMD previously installed stuff, and now I managed to reinstall AMD drivers. So far so good*

I installed the AMD graphics (It's a laptop), and then the laptop stopped working (Windows stuck at the welcome screen)
So I had to go to BIOS and disable Switchable Graphics and select "UMA Only" < now it works.

I wanted to know if I can do something to choose Switchable Graphics again, because maybe Windows tries to use the non-working AMD Graphics on startup. And I want to do that to maybe try and re-install the AMD drivers.

But I can't do it if it won't let me choose Switchable Graphics first.

Anything to do?

Thanks!

More replies
Answer Match 46.2%

My computer is a Gateway One and like it has an Intel HD Family graphics card.
I update the drivers but it causes minecraft to not work (it says bad graphics card)
It also doesnt allow me to use Photoshop CS6 (i can load it but as soon as i open a photo it wont show photo)
Right now my driver is currently on 8.15.10.2372 but when i update it goes to 9.17.10.2736 and changes the name from Intel HD Graphics Family to Intel HD Graphics Family (Microsoft Corporation - WDDM 1.2)
Is there any way to have it fully updated and allow it to have minecraft and photoshop working?
I need at least photoshop to be working! thats my job so yeah.... thanks!

More replies
Answer Match 46.2%

I am currently using Fujitsu Lifebook E736 with an Intel HD Graphics 520.
Everytime after i've travel for a few days and when i try to dock the laptop on a port replicator. There is no output, like it did not detect it at all. Then i try connecting it directly using the VGA cable to the laptop, there is still no response.
So i try to restart it on the login screen and the same occur.
But when i login to the windows and restart it, it become normal again.
For the next few days, it will be as per normal.
But if i were to travel(not docking it) for a new days, the same thing occurs again.
It seems like there is something "reset" during these days.
Any idea?

More replies
Answer Match 46.2%

I have a DELL Vostro 3550 w/ Intel HD Graphics 3000, and whenever my laptop finishing loading the Windows 8 OS (beta fish) the screen completely disables. I then have to hookup a VGA monitor in order to use it. I already installed EVERY driver from support.dell.com matching my service tag including the Intel HD Graphics driver associated with my machine and there don't seem to have any problems w/ the display drivers in the device manager. I also tried countless comboniation of settings in my Intel Graphics Utility and Resolution/Screen settings, nothing seems to be working. I've looked EVERYWHERE, but no luck.

Status: Solution Pending
----------------------
This Applies to the Following:
Dell Vostro 3550

A:Intel HD Graphics 3000

Have you tried the mobile Intel HD drivers in my other thread?

10 more replies
Answer Match 46.2%

I dont know how to copy paste info of my OS with my netbook...i was using Windows 7 b4 bt had a problem & the technician guy repalce my OS with Xp..im using Windows Professional Xpirant service pack 3... under device manager..Intel Graphics Media Accelator 3150 is not installed. its says:

Device type : Display Adapters
Manufacturer: Intel
Location : PCI bus 0, device 2, function 0
Driver Version: 8.14.10.2117

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

The driver cd that comes with it when i bought my netbook dsnt detect any display adapters..i went to samsung.com site to look for drivers...bt when i run the driver for grahics driver windows xp os..bt it wont work...

Can anyone help where can i get the right driver?

A:Intel Graphics Driver

i was using Windows 7 b4 bt had a problem & the technician guy repalce my OS with XpI suggest you don't use that guy anymore.Why on earth would you replace brand new OS with 10 years old OS?What was the problem with Windows 7?Why didn't he simply reinstall Windows 7?

14 more replies
Answer Match 46.2%

I have a Lenovo IdeaCentre AIO 700 23.8inch All-in-One. The processor is Intel i5-6400.  From the first time windows 10 loaded I noticed green dots on the screen at certain times. They look like dead pixels but they are not always present. They are most noticable on the log on screen, and on the start menu. When I disable the intel graphics display adapter, the Nvidia GT 930A takes over the display and there are no dots. I have updated the intel hd 530 driver to 20.19.15.4352 through windows auto udpate. But the problem persists. Any ideas??

A:Intel HD 530 Graphics Issue

try to download the driver from Intel Webpage .might work.



Did someone help you today? Press the star on the left to thank them with a Kudo! I dont know what Kudo does but anyway xDThere is nothing like 192.168.1.1

4 more replies
Answer Match 46.2%

Windows 10 just installed on my laptop.. and it refuses to allow me to open an overlay editor. It complains that it has a problem with my intel HD Graphics 4600 card.
I downloaded the latest new drivers for this card - ones that were made available because of the release of Windows 10 and this installation made no difference. I even uninstalled the existing drivers and than rebooted. No luck.

What have I missed?? Everything else seems to work. I have only had windows 10 on my laptop now for about 2 hours. Not sure what will happen later as time goes on.

Any thoughts would be appreciated.

A:Intel HD Graphics 4600

Hi ve1drg and welcome to the forum

Please complete your system specs within your profile in full. In particular, where it asks for make and model of device, just saying Lenovo is insufficient.

Is this a Win10 upgrade or a clean install?What method did you use to upgrade?Did you confirm activation of Win10?Please post a screenshot of your device manager.With the exception of you downloading the latest driver for the 4600, have you changed any other drivers from the default Microsoft drivers installed during the upgrade /Win10 clean install?

16 more replies
Answer Match 46.2%

Is intel hd graphics 3000 enought to run windows aero ?and will it run the metro ?
I know itsnt enought to run the newest game ,but can it run the old games ?

A:About intel hd graphics 3000

  
Quote: Originally Posted by baxxter


Is intel hd graphics 3000 enought to run windows aero ?and will it run the metro ?
I know itsnt enought to run the newest game ,but can it run the old games ?


if your refering to Metro 2033 it will not run it.
as for older games you will just have to test.

4 more replies