Tech Problem Aggregator

Connecting SCSI Hard Drive to my external enclsoure?

Q: Connecting SCSI Hard Drive to my external enclsoure?

Ok I have a external enclosure that is IDE / Sata , I have 2 hard drives I'm not using , there both SCSI 10,000 rpm Hard Drives, my question is how can I connect one of them to my external enclosure so I can connect em to my USB

A: Connecting SCSI Hard Drive to my external enclsoure?

You cannot do that. Your drive which is SCSI will not connect to an IDE/SATA controller in the external hard drive enclosure.

4 more replies
Answer Match 86.94%

Hello, this is my first post here. I have an HP Workstation x4000 I use at work for Designing CAD Models. This is an old computer. My problem is that I am out of room on the Hard Drive. It is a 58 GB SCSI,68pin HP Hard Drive. My IT support guy purchased me a 1GB SATA Drive,Raid Card,enough Memory to fill the MEC Card, and Norton Ghost to flash over the new Drive. My problem is, the Card he bought will not fit into the Mobo. The ribbon in the Computer has an empty plug and a power plug,but they are for a 68 pin SCSI Hard Drive. Is there a cable made that I can use to simply plug the SATA Hard drive into the 68 pin ribbon,or do I need a card? Do they make such a thing? My boss is extremely frugal and doesn't want to hear that the best thing would be to replace the 12 year old computer! Thanks for any help you guys can give me
 

More replies
Answer Match 76.86%

I have a bunch of movies on my 500GB external HD. I would like to connect this HD to my PS3 and from there go to 'Video' and from there go to 'USB Connection.' However, the 'Video' part is as far as I get. My PS3 doesn't seem to like my external HD. I'm told that the PS3 will only play DivX files but I'm also told that this is rubbish, that the PS3 will play most formats, MPEG, MPEG-4 etc. Who's right ? Also, I watched a video (on YouTube) of a tutorial on how to play movies from an external HD on the PS3 so I know it can be done. But where am I going wrong ? I heard something about having to convert/format my Ext HD to something called Fat32. What is this and what are the pros and cons of it ?
 

A:Connecting External Hard-Drive To PS3

16 more replies
Answer Match 76.86%

I have an external hard drive connected to a Toshiba laptop (vista). I have configured it to share all files to everybody. I can see the files and even copy the files from my other Toshiba laptop (win7), but I can't write to the file.

I am looking for guidance as to how to make it available for writing.

bob
 

A:connecting to external hard drive

7 more replies
Answer Match 76.02%

I have a 2 1/2" mini external hard drive, that I haven't used in several weeks or more, that I now can't seem to get my computers to recognize when plug it into a USB port. I've tried it with the desktop I'm using to write this post, and also a netbook that has a Windows 7 64bit OS, and neither computer will recognize it in "My computer" or under "Disk Drives" in the Device Manager.

The first couple times I plugged it into my desktop I at least got a "found new hardware" reaction, and an installation wizard window appeared to load the appropriate software for it (which it couldn't find), but now all I'm getting is an audio beep or two when I plug it in, but no other recognition. What am I missing here?

Firstly, I don't recall the hard drive formerly needing any special installation or drive software, but my memory's not worth a tinker's damn these days so I'm not really sure. I thought I remembered it as a plug and play that provoked a window asking which alternative of options, such as, "View files?", etc. Also, I can't find the original hard drive cable that came with the purchase, but I do have a Type A USB to mini 5 pin replacement cable that I'm using for this now. It's the only cable of it's kind that I currently have so I can't try an alternative cable at this point.

Can anyone offer some suggestions as to what the problem might be? Thanks for your... Read more

A:Problem connecting an external USB hard drive

What is the make and model # of your 2 1/2" mini external hard drive?
 

2 more replies
Answer Match 76.02%

My WD External Hard drive keeps connecting and disconnecting every second or so. I already went into power settings and disabled the USB selective suspend settings but that didnt solve the problem. I also went into the device manager and unchecked the option to allow the computer to turn of this device to save power option but no luck there either.

A:WD External Hard drive keeps connecting and disconnecting

Hello kieron22!
I'm sorry for your problem with a WD external!
Which model is it, a My Passport (which one?), a My Book?
You could try using a different USB cable, a new one, then on every port ? USB 3.0 and 2.0, then on another system. Does the same issue occur everywhere? Doyou hear clicking from the drive or any other unusual sounds? Any error messages? How is the drive's performance? Please use the WD Data Lifeguard software (Support Answers) and check the drive's SMART values, post the results here. Please, be careful not to post the drive's serial number, too!
CK_WD

6 more replies
Answer Match 76.02%

Hi i recently purchased a new computer and wanted to get some info off an old ide drive that i had so i purchased an external enclosure for my drive (akasa integral 3.5" enclosure ) when i connect it to my pc via usb it does not recognise it as a drive it just recognises as a usb mass storage device !! is there any way i can get it to work to extract the data i need????

running vista premium x64
 

A:Issue Connecting External Hard Drive?????

Is the drive formatted?
 

3 more replies
Answer Match 76.02%

This is a followup post to the thread at
http://forums.techguy.org/multimedia/974389-playing-movies-seagate-1tb-external.html
My original DVD/VHS combi does not support AVI files, so I bought a cheap player that does however burning AVI files to disc to play on that machine is so tedious I decided to connect a hard drive directly.

Unfortunately my DVD player cannot read drives formated as NTFS (apparently Microsoft own the copyright and charge a high license fee!) so I download a free utility from Seagate that allows large drives to be formatted as FAT32.

http://www.seagate.com/ww/v/index.j...toid=65af7bb4d9391110VgnVCM100000f5ee0a0aRCRD

Everything works as it should, the hard drive with its own direct power supply is connected via USB to the DVD player, a menu similar to a Windows folder structure is displayed on the TV screen and I can navigate the list using the remote.

DVD files in vob format with the usual sub folders Audio_TS & Video_TS, and AVI files play as normal.

I have not tried other formats such mkv so I cant say whether they would also work.

Please NOTE if you format your external drive, the content will be DELETED, therefore if you choose to use this info, please dont hold me accountable for any unfortunate consequences.

Harry
 

A:Connecting external Hard drive to DVD Player

harry-uk said:


This is a followup post to the thread at
http://forums.techguy.org/multimedia/974389-playing-movies-seagate-1tb-external.html
Unfortunately my DVD player cannot read drives formated as NTFS (apparently Microsoft own the copyright and charge a high license fee!) so I download a free utility from Seagate that allows large drives to be formatted as FAT32.

http://www.seagate.com/ww/v/index.j...toid=65af7bb4d9391110VgnVCM100000f5ee0a0aRCRD

HarryClick to expand...

I forgot to mention in my original post that although this utility is designed for Seagate drives it WILL format other makes provided it can identify an attached Seagate drive, but that drive can be either internal OR external (as it was in my own case).
 

1 more replies
Answer Match 76.02%

windows98 is already on my 13gb ide drive, but i have a new 9gb scsi drive which is really fast 80mb/sec,
I would like to install only windows for now so machine boots faster, can i do this and still have other files on existing slower 13gb hdd i.e. games, txt files and pics?
I have managed to make ide drive as slave but i dont know how to go abouts installing win98 on scsi, as machine keeps booting to windows, from the slave drive. And when i attempt to install win98 it tries to put it on the ide drive which alwready has it on.
Do i need to disconnect the power supply to the ide hdd?
Does scsi drives have master/slave jumper setting like the ide?

My new hdd is MAG3091LC on this page
www.fujitsu.co.jp/hypertext/hdd/drive/disk_e.html
 

A:if i have 1 ide and 1 scsi hard drive how do i install windows on the new scsi hd?

8 more replies
Answer Match 75.18%

Good afternoon,

Can I connect my Western Digital External Hard Drive to my home network using a USB to Ethernet adapter? I want to be able to access the contents of the hard drive (pictures, music, and documents) from any computer on the network.
 

A:Solved: Connecting External Hard Drive to Network

7 more replies
Answer Match 75.18%

I use an external hard drive connected to my computer via a USB cable.
My O/S is Windows XP Prof

As of yesterday I noticed that whenever I connect the external hard drive a window
opens,indicating AUTOPLAY.

Then this AUTOPLAY window indicates all kind of folders of the hard drive.
This goes on for 30 seconds and only then can I use the external hard drive.

It was never like this before and I wonder if anybody has an idea how to
solve the problem ?

Thank you

AntonABC
 

A:Weird Autoplay when connecting external hard drive

Sounds like normal AutoPlay behavior. Many people just disable Autoplay, here's how: http://support.microsoft.com/kb/967715
 

2 more replies
Answer Match 74.34%

I have an old external hard disk (2005) and when ever I try connecting that to my Vista laptop thru USB, I get the dreaded blue screen. I am running Vista Home Premium 64bit on the laptop. On connecting, it says, installing device driver in the system tray and then the blue screen comes up.
I am able to connect to my netbook which has XP Home, with out any problems.
I have wiped put the drive using Media Wiper, then formatted it and still the error would not go away on my Vista PC.

This is the Problem Report I found -->


Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFFA600092307D
BCP3: FFFFFA60021D27E8
BCP4: FFFFFA60021D21C0
OS Version: 6_0_6001
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\WINDOWS\Minidump\Mini052409-01.dmp
C:\Users\VjPhans\AppData\Local\Temp\WER-61370-0.sysdata.xml
C:\Users\VjPhans\AppData\Local\Temp\WER146A.tmp.version.txt

Read our privacy statement:
Microsoft Online Crash Analysis

--------------------------------------------------------------

I have attached the dump files that were generated by the system.

I would appreciate any help from you guys.

Thanks,
VJ

A:Vista Blue Screen on connecting External Hard Drive

While doing some searching I found this post in another forum from which it looks like this is a problem thats been happening with Vista SP1.

Code:
http://www.neowin.net/forum/index.php?showtopic=619530
Thanks,
VJ

1 more replies
Answer Match 65.52%

Hi everyone,
I wonder if anyone have a good site where it can guide me on how to installed a second SCSi hard drive. I have a HP tc2120 server with one 36.4 Gb drive. I have anotherone just like that. But I never have installed and SCSI drive. I have only done the regular IDE drives. I need some help.

thanks,

AMD2800
 

A:SCSI HArd drive

9 more replies
Answer Match 65.52%

My computer is not recognizing my SCSI 70 ghz drive. It keeps saying PXE-E61 failure check cable. It worked fine last night, I reformatted my secondary IDE 40 ghz drive and I could not get my computer to start. I had to disconnect my SCSI drive and setup windows xp on my IDE 40 ghz drive to get my computer to start. It still doesn't recognize my SCSI drive. I need help.
 

A:SCSI 70 ghz hard drive

This generally pertains to a bad hard drive or bad hdd cable same as a "non system disk error" with same solutions.
http://www.computerhope.com/issues/ch000229.htm
 

2 more replies
Answer Match 65.52%

Hi,

I have a Dell Poweredge SP5166-2 that uses Seagate Barracuda (4.3gb) hard drives put into trays that are slid into the computer and connected to the motherboard. I want to put another hard drive in but it is an HP C2490A (2.1gb). When trying to install it the first times, bios recognizes it and says it is working properly, but it is not displayed under Win2k's logical devices or my computer. It is however displayed under device manager. So, it does exist but I just can't make it work within my computer. I also tried to make connect the SCSI bus cable that goes into the cd rom into the hard drive, but no luck. Is there any master slave config for scsi devices? My understanding is that there aren't any; only scsi ids. Any help is greatly appreciated. Thanks in advance.

Louis
 

A:HP SCSI Hard Drive

Hi,

You can check couple of things.

You may want to check SCSI ID(which usually a jumper or switch on the drive.).

If you want the drive to be C:, check host adaptor which ID is bootable.

Make sure you have a terminator at the end of the chain.

Go device manager and check if your SCSI card has conflict with other devices.

Good Luck,

TJ
 

1 more replies
Answer Match 65.52%

Built a WinNT 4.0 server using SCSI raid array. Works fine. Enabled atapi in services and it sees the IDE CD-ROM (master, secondary channel) just fine.

But it won't see the IDE HD (master, primary channel)!

Jumpers, cables, HD all okay.

I'm sure I'm missing something obvious. Anyone have a clue?

Thanks,

Jim
 

A:scsi NT -- how to add IDE hard drive?

Greetings

Can your BIOS see the HD? If not, then your OS has no chance of ever seeing it.

Have you tried it as a Slave on the secondary controller? Or better yet, keep it as a master, and make your CD-ROM the slave on the secondary controller.

You could have a dead primary controller (I know my secondary controller is not functioning... damn, I need a new PC - who wants to help me raise funds for a new PC - any compnay that helps will get free advertising from me ), or a dead HD.

There could be something else wrong, but I am not that great with hardware issues. If you want, I can move this to the Hardware forum.

Cheers

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Website: www.xperts.co.za/reuel/multiboot

Every morning is the dawn of a new error...
 

2 more replies
Answer Match 65.52%

Hi,

I've got an old computer that we've just been using at the office for payroll and a few other things. The problem is its runningout of hard drive space, so I was just going to install another hard drive, but I forgot that it has a scsi hard drive. I was wondering if i could hook a regular hard drive up to the scsi cable? Any help will be greatly appreciated.

Thanks
 

A:SCSI Hard Drive

No.
 

3 more replies
Answer Match 65.52%

ok i posted eariler and its final the scsi seagate is mine and it looks like im keeping it.ok so i bid on the scsi control card thats ldv and now im looking for a cable . my question does the cable need only one terminator? im new to this so if anyone can help me out on installing a scsi hd it would be greatly appreciated
 

A:scsi hard drive?

You want a 68pin internal LVD cable, it should either have a terminator built in + two connectors (one for the SCSI card, one for the hard disk), or three connectors + you'll need to plug a terminator into it. The devices should be arranged with the SCSI card at one end, the hard disk in the middle and the terminator at the other end. The SCSI card provides termination for its own end (unless you want to put the SCSI card on the middle of the cable, in which case you need a terminator for each end). The terminator must be LVD or LVD/SE compliant.
 

3 more replies
Answer Match 65.52%

Whenever I boot up my old computer, I get a message during bootup that tells me that the SCSI boot device is not installed. I have a SCSI hard drive connected to an Adaptec SCSI pci card. I had just taken the hard drive and card out of that computer and tried to install them on this computer, and it didnt work, so I put it back. I tried running a SCSI utility on the bootup screen, and it didnt even recognise the existance of the hard drive. It wont let me format or anything. If there is something I can do to get it working, then please post. I do not care if the solution requires reformatting, because I do not have any really crucial data on the drive.
 

A:SCSI Hard Drive

9 more replies
Answer Match 65.52%

Hi,

I've just bought some hard drives.
They weren't expensive, i got them in a clearance sale, they are SCSI types.

One of my PCs uses an SCSI hard drive as its local drive 'C',
However this PC has a power supply feed to the SCSI hard drive, and also the
SCSI connector ribbon cable.
Thats two separate cables.
One for signal, and one for supply.

The SCSI hard drives i bought have no feed point for a power supply.

So i don't know how to try them.
They must use some supply to operate, so could it come via the SCSI cable ?
I suppose it must come from there ... ?

Ive never seen ones like this before.

I dont want to try them without checking first.
Any comments or suggestions would be welcome.

Model: WDE18300-6029A8
Made: 26th May 1999

I got eight in all, some like this one, and some others.
Now i'm a bit worried about trying them, as they might try to draw more current
from the SCSI signal wires than they were meant to give.
These ones come in a sort of Slot-in carrier, what difference that might make
i don't know.

Cheers, John
 

A:Some help please in trying to use an SCSI hard drive.

14 more replies
Answer Match 65.52%

I was able to salvage an old system from the trash at work. It has a Western Digital 4.3GB SCSI hard drive and I want to know if i can use it in a non-scsi system. To use it will I have to use a SCSI adapter or have to have all HD's as scsi?
 

A:Using SCSI Hard Drive

You can use it if you have a SCSI adapter and you can mix IDE and SCSI in the same PC.
 

1 more replies
Answer Match 65.52%

Hi there,

I won't get too deeply into the harrowing saga of how two external hard drives of mine died within days of each other. Rather, I'll just say that I would like to do a virus scan on several external hard drives (including/especially the one I just got to replace the others). In other words, I want to find out if there was a virus or something in the material that I'm putting on the hard drives that makes them die. Could this be possible? If so, how can I conduct a virus scan specifically on the external drives?

Thanks!
Sonya

A:Scanning an external hard drive for viruses? External Hard drive DRAMA!

In My Computer . . right click the external drive and select Scan with { name of AV }

1 more replies
Answer Match 64.68%

Does anyone know of a website that I would be able to find the drivers for a scsi hard drive? I have been searching for what seems like weeks now and can't seem to find anything.

A:SCSI Hard Drive Driver?

The driver you probably need is not for the SCSI "drive" itself. It's for the SCSI "host adapter" to which the drive is attached.

Please give brand/model specifics of your machine... laptop or desktop (probably) and type/model/details, SCSI drive (internal or external), SCSI host adapter to which the drive is cable-connected.

thanks.

5 more replies
Answer Match 64.68%

hello,

im going to setup a IBM Xseries 235 server in my home soon. I bought several drives. I noticed that one of the drives i bought is a scsi drive that runs at 7200k and the other drives run at 10000k. i bought two 7200k hard drives and 4 10000k hard drives. the server only supports raid 1. Would it be okay to create 3 raids. My computer supports up to six scsi hard drives. Can i create a raid with two 10000k hard drives to host my operating system and a little data, a second raid for my web server data and the third raid for my 7200k hard drives for ...idk, music.?

does that sound like it would work. would the 7200k hard drives slow down my computer?
is it possible to create 3 raids on a single server?
 

A:7200rpm scsi hard drive

bump
 

1 more replies
Answer Match 64.68%

I have a SCSI Hard disk, that i some how messed up by transfering it to a different controller, cuz i didn't know that you can't do that, i do now. i tried to get it to come back alive, by puting it back on the controller, but my master partion table thing got messed up, when i had tried to use it on the other controller, the first controller was a LSI Logic, and the second was an Adaptec 2490-UW. so i tried to use diskprobe to read the sectors and set it up like that, which failed. i thought it might have something to do with the board so i had taken that off, but now when i go into the Adaptec "SCSI-Select" program it doesn't show a size. could i have connected my board back up the wrong way?? it does still spin up, but i don't understand why it lost the size of the disk. it had the size before btw. it is a 18.2 GB 10K RPM SCSI-2 drive, and i have 2 other identicals if they may be of any help. but i really want to know if this drive is toast.
EDIT:: COMPAQ Model #: bd018734a4
 

More replies
Answer Match 64.68%

I have a Win2k3 Small Business Server being ran with RAID on 4 hard drives.
1 hard drive just got failed and i replaced it with the "same looking" hard drive.
When i plug in the new hard drive i noticed that it does not match up to the others in size and its not meeting the requirements in size to rebuild.

When i looked closer at the hard drive i noticed the following difference from the other 3 working hard drive and the 1 damaged one:

Part: 9v8006-001
Firmware: e302

The model and brand are the same exact settings but non the 2 noted pieces of information. Do you think this could cause a problem if this 1 hard drive was different from the others?

Just wondering because i never had this happen to a SCSI drive on RAID settings, and yes its set to be auto hot swappable and ready to rebuild RAID - its just not working because of the size..........so it says.
 

A:SCSI Hard Drive Question

You should be able to use it. If that hard drive is slower then the other, it will slow them all down to match it, and your hard drives will only use as much space as is in the smallest drive. That is the way it works with conventional hard drives anyway. I would back up your data if possible first before you try it (if you haven't already), just in case.
 

1 more replies
Answer Match 64.68%

OK you SCSI experts, I've got a question for you. First, the particulars of my computer:

Dell OptiPlex GX110, 733mhz Pentium III, 256 Mb RAM, Adaptec AHA-2940U/AHA-2940UW PCI SCSI Controller with a maximum data transfer rate of 40 mb/sec., Boot drive is a SCSI IBM DCHS04W (4.50 GB) 7200 rpm with maximum data transfer rate of 40 mb/sec. and average read seek time of 7.5 ms.

Now, I just purchased a Fujitsu 18.2 GB, 10,000 rpm, SCSI hard drive, with a maximum data transfer rate of 80 mb/sec. and average read seek time of 4.7 ms.

My question: Will I benefit from the speed and efficiency of the Fujitsu drive by making it the boot drive?

I know that my SCSI controller card will limit the maximum data transfer rate to 40 mb/sec., despite the 80 mb/sec. rating of the Fujitsu, however, will the 10,000 rpm and the low average read seek time of the Fujitsu overcome the limitations of my SCSI controller card to the point that I should make the Fujitsu my boot drive? Thanks in advance for any assistance.
 

A:SCSI hard drive question

I will tell you this... going from 5400rpm to 7200rpm spindle speed makes a major difference. So going from 7200 to 10000 will make a difference.

For me, the decision would be easy. I would put the fujitsu as my boot drive.

It's a bigger drive and it's has better access times.
 

3 more replies
Answer Match 64.68%

I am helping my brother in law out trying to do a non destructive repair using the installation disc. When we went through all the steps and got to the section that shows the hard drives it does not recognize the hard drive and won't let us do a repair. If we wanted to do a clean install it still would not recognize the hdd.
I decided to check bios and see what was recognized and in the hdd section it showed that the hdd was a SCSI. It is not a SCSI drive. We checked PC Wizard 2008 and it showed SCSI. All the places show that it is a SCSI. What is causing this? It is not a SCSI drive but a SATA drive. Can anyone tell me what has happened?
 

A:Hard drive recognized as SCSI

it is SCSI emulation. Some USB drives show up this way too.
 

4 more replies
Answer Match 64.26%

Gigabyte GA-6LX7 Mb, 400 MHz celeron, 64 meg ram, 13.6 gig Maxtor ide hard drive, 9 gig Seagate scsi hard drive, win 98 se, DTC 3502A scsi adapter, Toshiba scsi cd-rom.
My scsi cdrom works fine, but. I can look at the scsi hard drive in windows and it says that it is only 19.2 meg, I can't access it in windows or dos. The on-board bios for the adapter doesn't find the hard drive or the cd-rom, but, I can still access and use the cd-rom drive.
Also, with ASPI3520.SYS enabled, the adapter and the primary and secondary ide controllers are disabled in device manager, it also makes A: drive use ms-dos mode compatibility.
I used the setup mode of the adapters BIOS to format the hard drive, After it formatted and I continued it says that it can't find a scsi hard drive.
 

A:SCSI Adapter/hard drive problem

Did you run FDISK and see if the drive is visible there?

Are you sure you have your SCSI termination correct?

If there are 98 drivers for your card you shouldn't need to load a driver file in the CONFIG.SYS - as you have seen it will put you in compatibility mode if you do.

Just checked the DTC site - it says:
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Windows 98 Drivers

Included - Use built-in Adaptec 151x/2x drivers <HR></BLOCKQUOTE>

Is that what you are using?

------------------
Get free stuff and help out a poor computer tech
(5/20 new, unlimited, pay to surf site added):
http://www.rkfdcore.com/ebaypics/referrals.htm
 

3 more replies
Answer Match 64.26%

Hello all,

I have an HP Workstation XW8200 running Windows XP SP3 that I tried hooking a projector to. I used a VGA splitter with one out going to the monitor and the other going to the projector. When connected while the computer is already running, the projector works. But once the computer is off, with the projector connected and running, and then the computer is turned on, it no longer recognizes my hard drive.

This problem is NOT fixed when the projector/splitter is disconnected.

In the BIOS, the hard drive is recognized but it will not boot. I tried booting into a Windows XP disk and running recovery mode, but it doesn't see the drive. Same goes for booting off of my thumb drive into Linux (Lucid Puppy 5.2.0), it does not see that I have any hard drive installed.

This has happened to two computers already, both are the same model and setup.
The hard drive in question is connected to onboard SCSI, and is a SeaGate Cheetah, I'm not quite sure what size.

I did take another hard drive from a third HP XW8200 and put it in to the non-working computer and it booted fine.

I do not see the projector causing the computer to not recognize the HD, but it definitely seems to be the catalyst for both of these computers (with each individual problem happening months in between, and over a dozen other similar computers still working fine).

Any help would be greatly appreciated, I'm at my wit's end.
Thanks,
L_C

Oh, and there are no error messages when trying ... Read more

More replies
Answer Match 64.26%

can some help me,i am trying to install 2 4.5 gig SCSI hard drives in windows 2000 .i an useing pci scsi card controller.
i load win 2000 boot disc,s my system finds scsi,s no problem
i format them and partion them .when it reboots to start loading windows it say cd rom error ! INSERT BOTT DISC AND RUN AGAIN
any body got any pointers...

thanks ....rog
 

A:two scsi hard drive install in win 2000

8 more replies
Answer Match 64.26%

As per the norm, I got a Monday call from a customer freaking out about their server. I paid them a visit and sure enough the Western Digital SCSI hard drive I replace about 6 months ago is dead. SCSI utility is seeing it as a 1MB quantum. I told them to boat anchor that machine and get a new one. It's a pentium (i don't remember) 600MHz machine so it's a bit of a dinosaur anyway. their book keeper is the hero of this story. I taught her how to backup the server which she did before she left on Friday. I loaded backup files on an unused workstation, mapped some network drives and had them back up and running PDQ.

What would make a machine eat hard drives? Thin it might just be a fluke, virus, inferior Dell product??????
 

A:2nd SCSI hard drive failure within 1 year

Is there a UPS or surge-protector installed between wall-socket and PC?
If not, unstable electricity might cause that, such as spikes, brown-outs or black-outs.
Or the PSU might be on the edge of its capacity. If the HD is a 10'000 RPM disk, they need a pretty good and stable PSU.
The disk should still be under warranty.
 

5 more replies
Answer Match 64.26%

*RESOLVED* Can't install second U160 SCSI hard drive

I have DL145 G2 from HP
http://h50043.www5.hp.com/Enterpris...nt/questions.aspx?cnty=th&cat=DL&ser=145G2#g1

On the black thing that is attached to the cable which seems to be a controller, it says U320. It originally came with U320 SCSI hard drive but I purchased two U160 hard drives because I was a *****. I connected one U160 SCSI hard drive to the server and installed windows os without any problem. But when I tried to connect the second SCSI U320 hard drive, it didn't work. In the BIOS, it correctly recognized two hard drives but when windows 2003 server loaded, I couldn't see or install the second hard drive. I read some FAQ in the link I copied above and I thought that I have to purchase optional SCSI cable or my U320 SCSI cable only supports one U160 SCSI hard drive or something... But I don't see any place to plug any more cables on the motherboard so I'm really puzzled...

I use two SEAGATE ST3146854LW 15K 68 PIN U160 DELL M6616
and my server is DL145 G2 AMD Dual-Core Opteron 275 2.2GHz 390845-001
 

A:Can't install second U160 SCSI hard drive

So the BIOS sees both the drives?

What do you mean by Windows not seeing the hard drive? You did check in the Disk Manager, right?

SCSI is pretty much backward compatible, so your U160 drives should work no problem. And you can hook up 15 of them to a single SCSI cable no problem.
 

8 more replies
Answer Match 64.26%

I am about to build my own PC. It will have a Maxtor Sata hard drive. When you are installing Windows XP Pro, do you have to press F6 and install a third-party driver? I was reading this book, and the guy said to do that. I have never heard about that before. Can you just hit install XP and let it do everything? Thanks.
 

A:Installing Windows Hard Drive SCSI

Yes you need to hit F6 to install a RAID driver. You will be able to get that driver from the motherboard manufacturers website in most cases. The resulting RAID driver that you get will need to be on a floppy, so if you were planning on not putting a floppy in the computer you were building (like many do), you will have to at least have a floppy during the setup process of Windows. Sorry, theres no magic "hit install XP and let it do everything"
 

5 more replies
Answer Match 64.26%

Long story short.. An office I help out had a RAID Array crash without a backup. The data has been recovered and is sitting on a Fujitsu Hard Drive (Model: MAX3036NC).

My computer, and the remaining working computers in the office are all IDE or SATA architecture.

I'm guessing there is a PCI SCSCI Card that I could buy, install this hard drive and access it that way. If that is the case, could someone recommend a card/manufacturer that would work for this case?

Any help is appreciated.

Edit: We also have a laptop available if there is a PC-Card solution.

Thanks,
 

A:Solved: Need to access a SCSI Hard Drive

6 more replies
Answer Match 64.26%

Just tried to install a SCSI hard drive on a win98 system.

Drive is in Device Manager but has no Letter assigned. Does not allow me to.

BIOS recognizes drive and assigns D:
 

A:SCSI Hard Drive - No Letter Assignment

7 more replies
Answer Match 64.26%

hi my new sata hard drive is showing as a scsi in win7
and it seems to be running slow and making alot of accessing data noises
how can i fix this back to sata
thanks

A:new sata hard drive showing as scsi in win 7 help

With some hard disk controllers it is normal for it to show up as a SCSI disk - particularly if the disk controller is running in AHCI mode, which is preferrable since it allows features such as NCQ. One thing you may want to check is: locate the drive itself under "Disk Drives" in device manager and go into the properties. Select the "Policies" tab and view what is set. For better performance you will want it set to "Better Performance" with both of the boxes checked. Though if you lose power you may run into minor file corruption issues - I personally have not had issues with this. If you disable those check-boxes performance can decrease significantly.
 
-David Betournay

1 more replies
Answer Match 64.26%

How do I get Windows XP Pro to duel boot from a second scsi hard drive. First scsi hard drive has Windows ME and works fine.
Second scsi hard drive has Windows XP pro but only works when I change the scsi ID from 1 to 0. But then the other scsi hard drive is not reconized in windows explore. However, it is reconconized in the XP disk manager and everthing else appears normal excapt that the drive is not read in explorer. Any help PLEASE
 

A:Duel Boot XP on second scsi hard drive

Was XP installed with both HDs in the machine, and with Me installed first? If you installed XP with only its HD in the system (so it was 0 when you installed it), the XP boot files are on the wrong hard drive. They need to be on the system's primary partition, which should be C: (where Me should be now if this is going to work right and properly dual-boot) and the ARC path in your boot.ini file is referencing the wrong disk for the XP startup to look on to boot XP when you have both disks set up.

Please post the contents of your boot.ini file here, and we will take a look.
 

1 more replies
Answer Match 63.42%

I have been trying to determine which device would be best suited for cooling a pair of SCSi 15k HDDs. I have been looking around at some of the following (in order) of interest. Sound dampening is not a huge concern, mainly concerned about cooling.

Smart Drive 2002 Copper Hard Drive Enclosure- SCSI compatible? Little documentation to indicate if rear is already equipped with wiring or is this will work with SCSI cables?
AEROCOOL HB-101 Hard Drive Cooler Aluminum- Wondering if this is a gimmick or a real option... or a SilverStone SST-FP53-B 5.25" Hard Drive Cooler or a Cooler Master CoolDrive 3... ??? Any other reccommendations based on experience or reviews? Thanks in advance for any help.
 

A:NEED serious advice about Hard Drive Cooling (Pair of SCSI 15k)

if you haven't already bought a case, buy a case with a hard drive cage fan and put it to use. for internal enclousures, all same size drives and cages are compatible. just make sure you have cool air blowing on those drives and they should be just fine.
 

2 more replies
Answer Match 63.42%

My first build: Via Kle-133 mb with Athlon 700 and 64 sdram
on board video and sound and 9gig Seagate Hard drive needing a scsi-2 thingy

My problem...
I power up and all things begin running and on the monitor it whizzes past the first screen that reports the "Award Modular BIOS v6.00pg, An Enery Star Ally etc...
Main Procecessor: AMD Athlon (TM) 700MHZ
Memory Testing:57344 ok + 8192k Shared Memory

Primary Master: None
Primary Slave: None
Secondary Master: Toshiba CD_ROM XM-5602B 1796
Secondary Slave: None

Floppy disk(s) fail (40)

Then immediately a black screen which says
BusLogic Inc BIOS Version 4.94G
Intelligent Bus Master SCSI Host Adapter
(c) 1995 BusLogic Inc. All Rights Reserved

BusLogic PCI SCSI Host Adapter Firware Version 4.28D
Press <Ctrl-B> to Enter AUTO-SCSI

Which I do the <Ctrl-B> thing and it takes me to a configuration Utilities and Diagnostics program. I try to push the right buttons
Under Utilities and under SCSI Device Information it says
SCSI ID 3: SEAGATE SX910800N
SCSI ID 7: BusLogic BT-946C
(which makes no sense since the hd is a Seagate st410800N)
Under Verify Disk I get the same result

OK then I try the Format Disk option
and the same exact result box comes up with SEAGATE SX910800N highlighted... when I press enter, it asks: CONFIRM? yes or no, I highlight yes and enter and then.... a freeze.

Now if I reboot it will do the same thing every time.
If I ignor the Press <Ctrl-B> to Enter AUTO-SCSI thing, the puter will g... Read more

A:New computer built hard drive with scsi problem

11 more replies
Answer Match 63.42%

Hello All,

I just got my hands on a Compaq 36.4 gb hard drive (10k RPM). It has an scsi port connector but I don't know how to connect it to my ECS board which is fairly new (one of those SLI-status boards). I might need a converter of some sort. The hard drive model is: BD0366459B , my board model is ECS 945-p ( http://www.digit-life.com/articles2/mainboard/ecs-945p-a-i945p.html ) .

Thanks ahead of time.
 

A:Hard Drive Compatibility?:confused: SCSI to IDE or SATA?

According to this site
Product Name BD0366459B
CD-ROM Drive Compaq CRD-8402B
Hard Disk Drive Compaq BD0366459B; 9.09 GB; Firmware 3B12; Wide Ultra3SCSI
BD0366459B; 145. GB; 291. GB; Firmware B005; Wide Ultra3SCSI
Host Bus Adapter Compaq Integrated Dual-Channel Wide-Ultra SCSI-3 ControllerClick to expand...

You need

(1) a SCSI-3 controller to be installed into the mobo
(2) a Wide Ultra3SCSI cable

You may get the hard disk cheap but could get rip off by the hardware needed to go with SCSI equipment.

The Sata can be viewed as a poor man's SCSI but at least your mobo support 4 units out of the box. I doubt if a SCSI can be cheaper than Sata nowadays which is being retailed at GBP 0.128 per Gb. Thus the 36.4Gb unit would cost no more than GBP 4.65 in UK which, if being a Sata disk, is equivalent to approximately one imperial gallon of petrol. That amount of money will not be able to buy either one the above two attachments required to run the unit.

Technically if you run a Sata Raid 0 to half the access time it should beat the SCSI disk performance hand down, I would have thought.
 

1 more replies
Answer Match 63.42%

I have a Dell Tower Computer (Circa 2000-2002) that runs RIP software (Raster Image Processor) used to send graphics/image data to a machine that makes by way of laser imaging our plates or masters for our offset printing presses. Monday the hard drive failed. The Dell has Windows XP license decals on it but when booting up it display Windows 2000 NT. The computer has only 1 hard drive, a 68 pin SCSI drive and the cable to it connects to separate dual channel SCSI card which is in a slot on the motherboard. There is another SCSI card (single channel) in the slot next to it which has a cable that goes to the machine that this computer drives. The software that runs on this computer is proprietary software and I have a re-install disk for it being send via UPS Next Day Air as I type. I have an XP disk & license that I can install on what ever hard drive I can get to work here and the RIP software manufacturer said their software would work on XP. But I don't have a copy of Windows 2000 NT.

My question is that if I can't find this same hard drive locally, can I use an IDE or a SATA hard drive instead and still run the RIP software correctly? There is 2 IDE (primary & secondary) connectors directly on the motherboard. One is used for the CD rom drive, the other is unused. I am not certain but I don't believe the motherboard has a SATA connection. I have 2 good spare IDE hard drives.

If I can't make plates I can't print so I need to get this reso... Read more

A:SCSI hard drive died - can i switch to ide or sata?

8 more replies
Answer Match 63.42%

SCSI vs SATA vs EIDE
What are the differences between all of these?

I'll probably not use SCSI, but I was looking at the WD raptor 10K rpm hard drive (SATA). Do you need a special motherboard or certain controller to run this hard drive? And do you need a special CABLE for it? I have tons of 80pin IDE cables, but those wouldn't work?

Thanks
 

A:HARD DRIVE question - SCSI vs SATA vs EIDE

Nope won't work. Different drives, cables, controllers. Some motherboards now come with the SATA interface built in. For more information check this site out. Its an OLD report on SATAs. Hard drives are now available for SATA use.

http://www.explosivelabs.com/articles/sata/
 

2 more replies
Answer Match 63%

Hi guys,
I recently bought a Toshiba satellite click mini, tried to use my external hard drive but its not showing up at all. Any ideas on how to fix this?
its a Seagate 250gb hard drive. Thanks in advance

A:Satellite click mini not reconising external hard drive or external DVD drive

Originally Posted by rachel.nickells


Hi guys,
I recently bought a Toshiba satellite click mini, tried to use my external hard drive but its not showing up at all. Any ideas on how to fix this?
its a Seagate 250gb hard drive. Thanks in advance



Is it usb powered? If so does the hard drive spin up? Are there any clicking noises from the drive?

2 more replies
Answer Match 63%

I want to get an external hard drive/dvd burner combo if there is such a thing. To make this question as simple as possible...I need a hard drive that my camera can be plugged into with the firewire. I also need the hard drive that is able to plug in to the USB2 slot on my computer, because
my new Dell doesn't seem to tolerate a firewire card which I installed and then took out and returned to the store. It froze my computer and I tried everything to stabilize it but had no luck. It did work long enough to download 10 min. or so of video and I burned that onto a cd. Thats when I found out I had a dvd-rom not a dvd burner......long story I know. Sorry. I just want to figure out the most economical way now to save my movies and burn them to dvd also using either another external dvd burner or maybe there is a hard drive/dvd burner combo?? Or should I just get two separate externals?
Again: I need the hard drive/burner to plug into my computer with usb2.
Then the firewire from the camera would go into the hard drive/burner to download the movies.
 

A:Solved: External Hard drive OR External Hard drive/dvd-rw combo?

16 more replies
Answer Match 62.58%

How do you get the power to your hard drive. The power supply has no extra wires or anything. Where does it come from?
 

A:{SOLVED} im a begginner, installing a new hard drive (scsi) so this may seem silly,

8 more replies
Answer Match 62.58%

This is my first attempt at building my own pc so forgive me if this is a silly question.

This pc has an SCSI as the primary drive (17gig) and I'm trying to add two 320g drives that are edi drives.

I added a new dvd drive, video card, and usb 2.0 card and those all work fine.

I tried the drives set to slave as well as well as cable select. I even removed one of the drives so that the only connector is the edi slave connector.

Am I having a problem because I'm trying to use an SCSI drive and the two edi drives? Do I need to use one or the other in order for this to work?

Any help would be greatly appreciated.

Let me give a little more information if it helps. The computer is a Dell Precision 530 Workstation. Company upgraded all their pc's and sold off the old ones for $50 each. I want to ue this as a media server for my home network.

It has a 17GB SCSI drive on it now that has my Windows XP Home Edition and a few other programs on it. I was going to keep it for exactly what it does now. Basic everyday pc duties.

I wanted to add two bigger drives for storage. The mother board has an SCSI connector and two EDI connectors. The secondary EDI connector is connected to the DVD drive and the CD drive. Obviously I don't need both but just left the cd drive in there since it wasn't hurting anything. Those both read and work fine.

I have the two 320 GB storage drives connected to the primary EDI connector.

The ribbon cable attached... Read more

A:PC won't recognize extra hard drives (edi) primary is SCSI drive

Hold on a minute... edi you mean IDE or eIDE don't you?

SCSI hard drives need to have terminated cables. IDE cables do not use termination. I would ditch the SCSI, but you will have to get into the bios settings and change the primary boot drive settings
 

8 more replies
Answer Match 62.58%

Hi I have an old proprietary graphics system that needs a SCSI hard drive, I found a Compaq C2247 1gb hard drive that should work (cylinders,heads,etc match one of its table drives) but it doesn't turn itself on when the PC is powered on.

The drive works perfectly in my new system as long as I have the "send power on signal" checked in the bios.

Is there any way of jumpering this drive so it turns on the instant power is applied as opposed to sending a signal to tell it to turn on?

Thanx
Ryan
 

More replies
Answer Match 62.16%

Hello all. This is my first post here. I Bought a scsi hard drive.

Maxtor 18GB SCSI Hard Drive
Formatted capacity: 18.4GB
Interface: Ultra160 Wide LVD SCSI-3, 80-pin (80 to 68-pin SCA adapter included)
Rotational speed: 10,000 RPM
Average seek time: 4.7 ms
Cache: 8MB

I have the ASUS a7n8x deluxe mother board. What pci scsi adaptor card do I get to run the hard drive? What cable do I need?

This is my first time using a scsi drive. I did a search on newegg and saw a range from $22 - $400+. Please educate me in the ways!
 

A:Installing a scsi hard drive on an asus a7n8x deluxe board

Anything from Adaptec is perfect, but not always the cheapest.
It's what I use on no less than 3 of my PCs.
http://www.scsi4me.com/index.php?menu=menu_scsi&pid=213&display=39160.htm
Brandnew Adaptec ASC-39160 Dual Channel Ultra160 SCSI Controller, $139.-

http://www.scsi4me.com/index.php?menu=menu_scsi&pid=3237
Brandnew bulk LSI Logic LSIU160 single channel Ultra160 all purpose controller $35.-

They have a whole collection of others, as well as loads of information there.
You could try and pick up a used card on Ebay as well.

You will also need a 68-pin internal flatcable with a terminator.
Look around on that website.

Also go to
http://www.adaptec.com/worldwide/pr.../SCSI&prodkey=talk_about_scsi&type=Technology
for a bit of background.
 

2 more replies
Answer Match 62.16%

Hello,

I have a BIG problem here with a SCSI drive on our web server in our school.

All of a sudden i keep getting Start Unit Request Failed at start up.

and then when I try to verify the HD on the SCSI menu I receive an
"UNEXPECTED SCSI COMMAND FAILURE" with above a SENSE KEY: "NOT READY".
Like it says, it's not ready.

now this is the secondary hard scsi disk, my primary bootup disk is fine, when i boot up windows, it boots up fine, but doesnt see the e: drive. in device manager though it is there and it says it is working properly.

Do you think it could be the hard disk has failed. only last week on this same server the power supply went. and we changed the power supply. could thsi be related?
Thanks

Ranj
 

A:SCSI hard drive problem. Start Unit request failed.

Try reseating the connectors to the drive. You might swap the power connector between the two drives. Maybe something was bumped when the power supply was removed. If that doesn't work then probably the drive has failed. I take it that the secondary drive is on the same cable as the primary one and it was working ok before the supply went?
 

1 more replies
Answer Match 61.32%

is it possible to connect three external hard drives thru one usb socket and if it is, what connector do I need

A:connecting external hard drives to laptop

Something like that? Check on power arrangements. Some expanders are powered externally, some only by the PC. And choose appropriately for USB2/3 and be very careful about appropriate cables for USB3.

1 more replies
Answer Match 61.32%

When i connect my hdd ,it sAYSpower DRAWING TOOMUCH and sometimes it doesn't support
when i connect other usb no problem is there. Help

A:Problem while connecting external hard disk

What type of external HDD are you trying to connect? Is it a 2.5" laptop style hard drive or a 3.5" desktop style hard drive? All 3.5" desktop hard drives will require an external power source to connect them via USB. Your computer seems to be a newer computer so power at the USB ports should not be a problem for a 2.5" laptop hard drive. You can try a power boosting Y-cable like this:
USB 2 0 A Female to 2 Dual USB Male Hub Power Adapter Y Splitter Cable Cord SGCC | eBay

That will split the power draw between two USB ports if you have two USB ports next to each other on the computer.

Even the Y-cable will not work for a 3.5" hard drive, though, it requires it's own real power supply.

1 more replies
Answer Match 61.32%

Hi,

For several weeks now, I have connected an 80 GB 3.5” hard-disk to a laptop (Hard-disk <-> IDE-USB cable <-> USB 2.0 hub <-> Laptop USB port). No problems.
I now bought another IDE-USB cable and connected a DVD RW 3.5” device.

The device is recognized (PnP) in Win XP. However, when I try to burn a DVD, the DVD disappears from the disks’ list (in “my computer” and “disks management”).

I have not yet found the cause.
My suspicion is that the combined traffic from the external disk and the load of burning a DVD is too much for the USB 2.0 protocol to handle.

Has anyone seen similar problems ?

Bye,
Ron.
 

A:Connecting external DVD and hard-disk to Laptop

6 more replies
Answer Match 61.32%

Hi. I'm new here and I really need some info. I have a Galaxy High Speed 3.5" Hard Disk External Enclosure connected to the PC and all is well. BUT...I need to connect my laptops to the External Drive as well. I cannot find them on the network connections. Any advice?
 

A:Connecting Laptop to External Hard Disk

14 more replies
Answer Match 60.9%

Hey guys!

My Zune 80gb stopped working a while back. It wouldn't charge. So I thought I would take out the hard drive and use it as an external 80gb hard drive. So I bought an 1.8" ZIF encolsure for it and installed the hard drive into it.

All appears good with the installation. When I plug the hard drive into the PC the light on the hard drive enclosure comes on and stays on & the disk starts spinning. Then Windows Vista does the whole "Install new Hardware" thing and calls it a "Disk Drive" and a "USB Mass Storage Device" and says hardware is installed and ready for use.

But the problem is I can't seem to access the drive. I can't find it anywhere. It doesn't show up as a drive I can use or anything. I tried a third party partitioning prgram to try and find the disk so I could reformat it but it wouldn't it couldn't find it either. I even plugged the drive into my Mac thinking that Disk Utility might be able to recognize it and let me wipe it, but the Mac doesn't recognize it as anything.

Back in Vista, Using Device Manager, Vista notices the drive under the "Disk Drives" option as a "Disk Drive" and that it is elecronically signed by Microsoft (since it has the Zune firmware on it) but I can't do anything with it ... And this is the only place where I can see that the drive even exists. I can't reformat it or anything.

Can anyone help me? I thought I read somewhere... Read more

A:Putting a Zune 80gb Hard Drive in an External Hard Drive Enclosure, help please!

anyone?
 

3 more replies
Answer Match 60.9%

I see it can be done from an installed to an external, but can it be done in reverse, taking the external cased hard drive and cloning it to an internal? The old hard drive is from an xp laptop, and I can aquire another xp laptop if I can clone this way. Perhaps if I set the enclosure hard drive as master? All ideas are greatly appreciated. Many thanks
 

A:Clone a laptop hard drive from an external case to an internal hard drive

6 more replies
Answer Match 60.9%

Hello,
I am trying to move all my files from my computer to my new external hard drive, but whenever I try and move a file over 4 GB in size i get this error message...
"The file is too large for the destination file system"... anyone know how I can get around this so I can move those files over?
 

A:Problem transfering large file from hard drive to external hard drive

Get ahold of some software that will break up the file into chunks.
 

1 more replies
Answer Match 60.9%

Hi,
 
I am heavy user of external hard disks and have been using it for quiet few years. Till now  I never confronted a problem like this. I usually connect the hard disk directly to the television instead of using a media player. But this time, after I connected to the TV some of the folders in my hard disk are not being read in my laptop. Windows 8 is not recognizing these folders. It shows 0 bytes as folder size where in the actual sizes of these folders are about 60-100 GB. The image below shows the files in the red box that are affected.
 
Now I'm worried if I will lose these data as they are very important for me. If anyone has been in this situation before or know about this please help me. It's urgent!!
 
Regards,

A:External Hard Disk not able to read some folders after connecting to LG LED TV

That looks like file corruption on the drive and thats a bad sign. Moving a hd around all the time can cause damage to the data if it gets bumped hard enough. It's best to use a SSD as there are no mechanical moving parts. You could try chkdsk from the command line. If the drive is D: then the command would be chkdsk /f D: You may also try a recovery program that can read data raw like recuva or isobuster or something like that.

15 more replies
Answer Match 60.06%

I recently formatted my c drive and now i am reinstalling all the software. I keep all the setups of software in my external hard drive. For installing the software I coy the setup folder of the required software on my laptop, then install it.

Is straightaway installing the software by accessing the external hard drive okay? Does it make any difference in the installation time or any reduction in life of hard disk performance.

Or should I always install through my laptop hard drive?

I am running windows 8.1 pro

A:installation software from external hard drive or internal hard drive

Your method is as good as any. If it works, keep doing it.

1 more replies
Answer Match 60.06%

I need an external hard drive for taking regular backups of all of my data.
When i searched the internet I got two options:
1. Porable HDD [high cost, slower speed but don't need external power]
2. Desktop HDD [low cost, higher speed but need external power]

I want to know that...
1. Which hard disk's live longer? Porable or Desktop.
2. I heared that pulling off USB cable of Portable HDD may cause data lose because it also supplies power to hdd.
What will happpen if Power goes off from Desktop HDD? Will my data/Hard disk remain protected?
3. Level of safety of data on moving or shaking on both Desktop and Portable HDD.
4. Can we install os and boot from portable and desktop external hdd?
 

A:Need Advice : External Desktop Hard drive vs Portable Hard drive?

Unless you really need to go portable with a Laptop .. I'd not use a USB powered External.
You cannot boot from a USB External .. But there's another option if you're capable of physically changing HDDs ..

Get a good external Enclosure (with a fan for cooling) .. Install a good HDD ... with a 5 year warranty
and make the HDD in the enclosure a bootable backup .. where you could swap HDDs if/when needed ..
 

1 more replies
Answer Match 59.64%

I have an AlienWare M11x purchased from Dell Computers. It has Windows 7 Home Premium, Intel Chipset U7300 Dual Core @1.3GHz, 8 gb ram, 64 bit operating system, NVIDIA GEFORCE GT 335M and Mobile Intel (R) 4 Series Express Chipset, 500gb hard drive. It has 3 usb ports (one continuous power). It has no built in dvd drive. I have tried both a USB Hub but most of the time plug directly into the computer. When I plug in a External DVD drive, it will connect and disconnect randomly. It may show it is connected and display that a disk is in it, but when you click on it or launch from it, it will disconnect. About a minute later it will reconnect and then disconnect again. I had an LG Multifunction Drive and when it first did it, I thought the drive was bad so I got rid of the drive and bought an Iomega Super Slim DVD drive and it worked at first but now does the same thing that the first external DVD drive did. I have tried both of the DVD drives with and without the extra power connection. I have downloaded all updates, drivers, etc. It only seems to do it with external DVD Drives. Any memory stick, IPOD, ITOUCH, External Hard drive is recongnized and stays connected. But external DVD drives do not.

I have had this computer for less than 3 months. I tried to contact Dell but when I type in the Service tag number it says that AlienWare does all the support for it. When I go to AlienWare, you have to create an account in order to even ask a question. In order to register for the we... Read more

A:External DVD Drive keeps disconnecting and connecting

What happens if you jiggle the USB from the DVD drive while it is plugged in does anything happen?
 

2 more replies
Answer Match 59.64%

I have a external drive that I used for backup with XP. What do I need to do to make it work with windows 8? How do I get win to recognize it? It is a IDE drive and is connected via USB.

Thanks

A:Connecting External Backup Drive

What happens when you plug it in?

If the answer is nothing, I would try installing the drivers using compatibility mode XP SP3.

5 more replies
Answer Match 59.64%

Hi!

I recently bought a Samsung 400GB SATA II EXTERNAL HARD DISK DRIVE (HD400LJ) received yesterday. USB connection with its own power source. It also has a turn off and on switch on the unit and will also power down when your pc is shut down. Now it worked fine on first connection last night. Showing up as F: drive I have stored around 30gb of files onto it. I usually leave my pc on all the time so I wasn't too sure about this external so I just turned it off at the button on the unit (not the power). Still connected by USB cable etc...My pc was still on the whole time.

This morning I turn it on and my pc won't detect the external hard drive. I tried my card reader in the same USB port and no problem my pc picks it up. I have tried different USB ports in case and still nothing. I also rebooted my pc and the unit, unplugged everything in case something was loose.

The unit powers on and off ok.

Not sure if there is some conflicting problem, the cable from the unit to the pc, or a driver issue?

I have used the hardware detection and it doesn't find it. First time plugging in my pc found the hardware showing up in my status bar, now it won't come up at all.

It was already pre-formatted, and was ready to go, and I had used it no problem. Now I concerned I will lose my files on there. Since I deleted them off my internal drive as it was showing low disc space so wanted to move most stuff to the external (images, etc not programs).

Can anyone give me an... Read more

A:External drive not connecting to pc (did first time)

7 more replies
Answer Match 59.64%

Looking to buy an external hard drive for backup. This will be used only to backup data periodically. This is certainly a good price ($140):

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1474205

I've never heard of it. Anyone have any experience with that brand?
 

A:Opinions on BeyondMicro External Hard Drive?-or recommendations on External Case?

10 more replies
Answer Match 59.22%

So I want to clone one external 2TB with another. So one drive is the main use one and another the backup one. So I copy everything over to backup and i store the backup at another house and then I start using the main: deleting and adding/editing files. What is the best software or whatever to allow me, after some time, synchronize/clone the externals again without deleting all on the backup drive and recopying? (main to backup) and make them clones again? ..Adding and deleting or replacing any nonidentical files.. Like where i can press a button on some software and it do the work for me.
Sorry if this is confusing

A:Best external to external hard drive synchronized backup plan?

There's a bunch of applications that can do that.

They all work pretty much the same way, but would differ in how easy they are to understand and configure---the interfaces would differ and the help files would differ.

I use FreeFileSync from sourceforge.net.

Others are Syncback, Folder Clone, Karen's Replicator, FBackup, Second Copy, and Synchromagic.

You should be able to configure them to do one or the other of the following:

1: If you delete or modify a file on the "original", it will also be deleted or modified on the backup.

2: If you delete a file on the "original", it will be retained on the backup. If you modify a file, both the modified and unmodified file will be retained on the backup.

It's up to you which choice you prefer. I use the first method, which is often called "mirroring"--one drive is an exact match of the other.

7 more replies
Answer Match 59.22%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) CPU G2030 @ 3.00GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 2
RAM: 3967 Mb
Graphics Card: Intel(R) HD Graphics, 1791 Mb
Hard Drives: C: Total - 448568 MB, Free - 399972 MB;
Motherboard: Dell Inc., 0XFWHV
Antivirus: AVG AntiVirus Free Edition 2013, Updated and Enabled

I am trying to connect an internal SATA HDD as an external drive for use as a backup medium for my system.

To connect the HDD, I am using a cable-set, consisting of a power-adapter, a cable adapter (6" long, 4-pin to SATA power fitting), two-sided femaile receptacle and ribbon-cable data fitting with a shielded UBS cable attached, 6" ribbon-cable.

With no power on, I connect the power-adapter and assorted cables and adapters to 125V AC power and to a USB port of my computer and to the SATA HDD. Everything seems to fit, mechanically.

I apply power to the computer and to the assembled SATA HDD components. The computer starts normally, but I do not notice any vibration, stirring, whirring of the SATA HDD. Also, when the computer is full booted, and I look at My Computer with Windows Explorer, I find that it does not recognize the presence of anything at a USB port, particularly not my SATA HDD.

I have tried fully booting the computer and connecting the HDD to the USB port afterwards, as I might a memory stick, but it is not recogniz... Read more

A:Connecting internal SATA HDD as external drive

16 more replies
Answer Match 59.22%

Hi everyone,


I recently purchased a Toshiba branded external dvd drive which officially has support for win7 and Vista (no mention of 8).

The external dvd drive is model PA3834A-1DV2 aka Portable SuperMulti Drive

When I plug this drive in with either one or two USB connections (the SuperMulti drive has 2 USB connections), there is enough power for the drive to eject and spin, but the computer does not show the drive in my computer. It is shown under device manager with a yellow exclamation point however.


Is there any official word on whether there is a way for this device to work with Windows 8 on the Z930?


Apologies if I should have posted this within a different thread.

A:Connecting external DVD drive to Satelite Z930

That?s really strange. I have external BD drive and it is automatically recognized by Win7 or Win8.
Do you use original preinstalled Win8 that you got with your notebook or you have installed it on your own?

6 more replies
Answer Match 59.22%

How would I go about connecting an HP Laser Jet printer and an Iomega external Zip drive in tandem? They both use the parallel port to connect. Thanks.
 

More replies
Answer Match 59.22%

Recently I purchased a WD external hard drive with firewire connection for my PC laptop. The drive works perfectly if connected using the USB cable, but when I try to connect using the 1394 firewire port, I get nothing. No power, no connection. I had to purchase a 1394 to Firewire 600 adaptor to connect to the drive but they don't want to talk to one another. Here's what I'm operating on.

500 Gig WD Passport External Hard drive
Sony Laptop with XP
Firewire 800 to Firewire 600 Cable
Firewire 600 to 1394 adaptor

Help!
 

A:I can't connecting WD external drive into laptop using firewire

I would not think this should be necessary, but...

If you see your "networking" icon in your system tray, double-click on it...
Otherwise, go to "Start" -> "Control Panel" -> "Network Connections"
Either of these will bring up a window where you can see if your 1394 connection is

"enabled"
"disabled" or
"connected"

See if you can enable your 1394 from this window.

If not, then right click on "my computer", Then click "properties" (last selection in the menu)
Then click the "hardware" tab and then the "device manager" button
click the "view" drop down menu, and check/tick the option "show hidden devices".

If you find any items in the device manager with yellow or red icons, this may be where your problem lies.

Try updating or rolling back the driver for your 1394 adapter
which should be found under "Network Adapters".

Another possibility may be if your computer already had a 1394 adapter, and your add-on is conflicting.
Again, this should be revealed by device manager.

HTH
 

1 more replies
Answer Match 59.22%

Hi all,

Starting about a week ago, everytime i connect my Seagate 3tb expansion drive (which is partitioned into 4 equal parts) to any laptop i get a bsod.....

It has mostly movies and other videos on it, the funny thing is that my tv still recognizes and plays all the videos on the different partitions.

I'm unable to do any chkdsk or use Seatools as the laptop blue screens within about a minute or so of connecting the drive.

I have attached the zip with the info from the BSOD sticky, hopefully someone can shed some light on this current problem.

More replies
Answer Match 58.38%

Hello, My WS external hard drive mini usb connector fell off.

Iv'e tried to weld It back to the usb adaptar on the external hard drive, but without succssess.
thus Iv'e totly dissconnected the usb adaptar from the hard drive and tried to connect It directly to the pcs motherboard via a SATA connection.
The Drive shows up on my computer as D: and seems to be empty...
From what Iv'e read from the web, WD drives could It be the encrypted, In that case how do I deal with It?
If you know somthing that might help, It'll be great.

Please help the info on this drive Is very important

More replies
Answer Match 58.38%

I had been using my Hitachi 320g external HD for 2yrs.It had not problem until yesterday I transfering some files from my Drive C to Hitachi HD when the computer hang.I unpluged the external HD and restart PC.When I pluged in the external HD again it was recognised as interrnal HD.I've problem accessing the files.The PC detected it was FAT32 since my system was NTFS and asked me to reformat my external HD.I tried connect to other PC but no different.
 

More replies
Answer Match 58.38%

I earlier posted about the Aspire AST690-UP925A having 250GB hard drive. I since then contacted Aspire chat support. Apparently, not being tech savy we didn't realize 250 gb hard drive only 112 c drive is able to be used, the d data drive holds the programs to run the computer.

I didn't mean can I use the external hard drive internally. I meant, if I hook it up externally would it work in place of the internal hard drive that is nearly full except for around 10 GB?

So, unfortunately the computer isn't as big as you believe. But...I wanted to know if I purchase (I was looking at western digital elements 2TB external hard drive). Can we use it for this computer. It will not run itunes or anything like that, but we can obviously go online.

My brother wants to buy a new computer, but I know that is probably not the way to go. Should we get an internal hard drive installed and other memory or something or can we use the external hard drive?

I would appreciate any informed help on this since we do not no technical info on computers. Can't really afford to buy another computer right now.

Thanks in advance
 

A:Can external hard drive be used for full internal hard drive?

If you want to take out the drive from external hard drive case and install it in your desktop/laptop, then usually you can. Usually external hard drives are just ordinary hard drives accompanied by some extra controller to make it able to "talk" via general ports (e.g. USB). However I am not familiar with digital elements 2TB , so I can not confirm it. But I do have WD external drive, which I had positively confirm that its real drive is just ordinary hard drive.

Note that if you decide to do this, I suggest to find experience people to work on extracting the drive. If you do it yourself you will risk to damage it, and you don't want that since usually opening the closure means voiding the warranty.
 

2 more replies
Answer Match 58.38%

I have an internal hard disk not in use ,and I would like to make it as external disk !
I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .
So is there another way ? like usb -esata cable ?

A:how to make your internal hard drive into and external hard drive ?

Firstly, where are you based (Which country)? I would get the part of the internet, I trust we are talking about a 3.5" drive? Do you have an esata port on your pc? I would get something similar to this, I think: Play.com - Buy CiT 35M17SEF 3.5 inch SATA / USB / Firewire / eSATA External Hard Drive Enclosure online at Play.com and read reviews. Free delivery to UK and Europe!

3 more replies
Answer Match 58.38%

I am unsure about what happens after you convert your internal hard drive to an external hard drive... Let's say the internal HDD was your only laptop HDD and you replaced it with a SSD. If you convert your old internal HDD to an external HDD, what would happen when you open it up on your newly installed OS (on the SSD)?

I am trying to download a new OS but us my old internal HDD as an external drive just to access specific files. However, I don't want any other data/programs/settings/etc. downloaded onto my new SSD. Do I need to delete my old OS when I convert my old internal HDD into an external HDD or does the OS simply get "reduced" to a bunch of files that I will see on my newly installed OS?

If anyone is able to clarify these questions that would be fantastic!
 

A:What happens after you convert your internal hard drive to an external hard drive?

does the OS simply get "reduced" to a bunch of files that I will see on my newly installed OS?Click to expand...

Yes
it will just be seen as a data drive and you would need to goto the directory for your data
it wont run as an OS at all
 

3 more replies
Answer Match 58.38%

Hi, for nearly a year now I've been using a Buffalo 500GB external hard drive.
Just yesterday though, after unplugging it from my PC, using it on another Windows 7 machine and then attempting to reconnect it the my PC, it began to show up on My Computer as a Local Disk rather than an external. In addition, when I try to access it, it gives me this message: E:\ is not accessible. The file or directory is corrupted and unreadable. My question is, is there any way to return the drive to it's original state or recover the data inside? The data is of extreme importance.
Thanks for any help.
 

More replies
Answer Match 58.38%

I currently am running windows 8.1 x64 bit, and I am thinking of copying my entire hard drive (consisting of C & D drives using a total of 929.2 GB of space.  And wanting to get a Western Digital External Hard Drive with 1.5 TB of space.  I have been led to believe that windows 8.1 has a utility called System Image Back Up Utility (located in the Control Panel).  I have also been led to believe that this can be done completely using a bit by bit copy of the entire hard drive (programs, files, drivers, apps, utilities, etc),  But I can not fine enough info on doing this. And there are still questions, such as How do you transfer the copy from the external hard drive back onto the PC if it should completely crash? (I do have a five disk recovery set I made when I purchased my PC, but still want an additional source of a back up system.)  I can not find the procedures for copying the copy from the external hard drive to the crashed PC, and are ther better and safer programs out there to use instead of the windows system Image back up utility?  I would add that I am somewhat of an intermediate user, useing PCs since windows 95. but there are obviously issues that I need to research before attempting something this complicated and advanced.  Any help would be greatly appreciated.  Thanks in Advance !










Solved!
View Solution.

A:Copying Complete Hard Drive to an external hard drive as a b...

A description of System Image Backup can be found here.  If you want both C and D, I would suggest a clone program. Both Seagate and WD offer a free Disk Wizard Program. With the cloning process, you use an external case to perform the clone.  When disaster strikes, you swap out the drives, and continue. Personally, I make clones of my primary desktops every 30-45 days.

5 more replies
Answer Match 58.38%

Hi guys,

I'm new on any sort of forums so go easy if it's a stupid question..but here goes.

Me and my brother built me a new computer from scratch (he did the building - i did the watching).

To cut a long story short - I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.

When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.

Does anyone know how I can get the internal drive to stop acting like an external drive?

Any help would be greatly appreciated.

A:Internal Hard Drive acting like an External Hard Drive

This is the way it works. I have an 80GB SSD and an internal HDD and the same happens if the file/folder is large enough. If you just copy a few MBs, you will not see the window with the green stripe running. But if e.g. you copy 500MBs, you will see it. It physically moves the data. That is different if you copy on the same volume from one folder to another. Then it only makes an entry in the MFT.

6 more replies
Answer Match 57.96%

HI,

I purchased an adapter on Ebay that was supposed to allow me to connect my ide hard drive to my sata mobo connectors. My mobo has primarily sata but it has one ide which is already connected to my ide hard drives.

I have tried everything I can think of. connecing this and that, reversing connections, nothing workd. The instructions I was given were awful and the person I purchased is not helpful in answering questions. He hasn't responded.

Once connected I can't get it to show up in the bios The hard drive is an IDE Seagate 400gb drive. I am connecting to a sata connector on my mobo. I already have two other sata devices connected, they are two dvdr's .

My computer specs are listed above in the computer icon. The converter I purchased is listed here:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300473666570&ssPageName=STRK:MEWNX:IT

Is there a trick to doing this?

Thanks.
 

More replies
Answer Match 57.96%

I wanted to ask two questions...

1. I have an hard drive from an old computer who hasn't been working for about a year and a half (reason unknown my best guess is either it was fried or it was a touch of god...) , will it damage my current system if I connect that hard drive in order to extract some data? just for a few minutes, I swear...

2. If it's not dangerous than how is it done? do I need drivers or something? it's a WD 10GB if it matters and my current system is pretty new about a year and a half...
 

A:Hard time connecting hard drive?

9 more replies
Answer Match 57.54%

I'm not sure if I should have put this in "Hardware" or not so...
I am, by far, a professional at this so hang in there with me if I confuse you. A few months ago my children broke the screen on my laptop and for a few weeks I was trying to use the External Monitor so it would show up on a monitor my sister gave me. Well I finally got that up and working however, now when I connect my external hard drive to the laptop, it will not show up on the desktop monitor. (The external hard drive is Western Digital).

This external monitor is a new thing for me, actually I knew you could do it but didn't try it as an option until my nephew - who is much younger than me - thought of it lol. Anyway, I have pictures and such on my external hard drive that were put onto the external by the very laptop I am using. I'm not totally sure of the montior I am using, all I can tell you at the moment is it's a Dell. The laptop is a Toshiba Satellite A135 S266; the laptop has Vista Home Basic (32 bit) and I believe the desktop monitor is running with Vista too but I'm not sure if that's important since it is only serving as a "view." Anyway, I would love some help with why the drive may not be working with this set up.

Thanks,
Kerri
 

A:Help with External Monitor and External Hard Drive

This may seem like a silly question, have you tried the HD on another PC to see if the issue is with that?
Also, are you saying it's not showing up in 'My Computer', or are you not getting the option to open files?
 

1 more replies
Answer Match 57.12%

Gday

I have emailed Paragon and am awaiting there reply, but you guys seem to know a lot more and try and solve the problem

Up to this point I have used either Acronis or Paragon for my backups, I prefer Paragon over Acronis, mainly because the restore by Paragon is far quicker.

I have both bootable CD's, but in this instance I would like to concentrate on Paragon.

I downloaded Paragon's Advanced Recovery CD. 2009 Build 6730. Put it in my rom and booted ....... looked at a black screen for 10 minutes. Removed it and rebooted, it got stuck at the loading of Vista, then I got another black screen no hard drive movement.

Rebooted again, this time with the regular Paragon bootable CD. It booted into the recovery console.

Now this is where things go from bad to worse. I tried finding my OS, after a lengthy period I received an error disk 2 i/o fault!!! ....... no operating system found.

Now disk 2 is my external hard drive where my backups are kept.

So I rebooted with the CD in, went into the recovery console and clicked on "safe restore", after playing the waiting game I get a message disk 2 i/o fault!!!.

Took out the Paragon CD, put in the Vista one, tried a repair, but there was no OS to repair .

So I installed Vista, and because I didn't want to have to reinstall all of my programs again (yer lazy I know, but that's what backup's are for).

Checked with the fresh install, that my two external hard drives, had there drivers and were present. They were ... Read more

A:Paragon Hard Disk Manager Suite & USB External Hard Drive

Anyone?

3 more replies
Answer Match 57.12%

hi there..

my name is Anis...i just bought external hard drive 500gb...but after I formatted it..it's just about 400++ gb can be used..i would like to know..how to use the extra/reserve space for my ext hard disk?by any means, i want to fully use my 500gb space for the external...please help me...thank you...
 

A:How to fully use the extra hard disk space for external hard drive?

It should have about 465GB, what are you seeing?

You will not have 500GB due to the conversion between binary and decimal for reporting sizes.
 

1 more replies
Answer Match 57.12%

I have a Compaq Evo SSF D500 P. 4 with 1.7 mhz. I want to install a Compaq 72.8 gb 10k rpm ultra 320 scsi Hdd pn: 232431-003 model no. BD07264546 which I already own.

Need advise as to whether this hd can be connected to my 68 pin controller (adaptec 29160n) with a lvd single device ribbon cable by using converter adapter.

In another forum, tech response was in part: "I would not, under any circumstances, install a 80 PIN SCA to 68 Pin adapter. They don't work and they will likely kill your drive. Even if you did find one that did work they tend to fit loose and that too will kill your drive. "

Are converter adapters as unreliable as this and is there possibility of not only killing the driving but damaging the cpu? I know that a 68 pin adapter will restrict the speed of this scsi hard drive, but I am interested in trying it out on this old computer. Is there any particular converter more reliable than others?
 

More replies
Answer Match 57.12%

Greetings,

I Have an Ultra360 SCSI Hard Disk, and I just want to connect it to my PC to copy its Data to my own hard disk, will this adapter do it for me:
http://www.adaptec.com/en-us/support/scsi/2940/aha-2940uw/

And how will I be able to deal with it ? I mean will I see it as a new hard disk in Windows ?

Thanks.....
 

A:Connecting a SCSI HDD to a desktop PC

I've done a lot of work in SCSI and you are on the right track.
One important issue with your drive: Was it originally an external or internal drive?
An internal drive will have 3 resistors near the cable connector on the pc-board,
while an external will not.

There is one issue you need to resolve: what connector is on your drive?
SCSI has three styles of cabling scsi-I, scsi-II, & scsi-III. Your drive will need
to cable to your controller card.

use google to look for SCSI cables and you'll get some pictures and descriptions.

As you may not have worked with this before, I'll remind you that SCSI needs terminator and the end of the device chain - - even if there's only one device.
There are two types: Active and Passive - - it doesn't matter.

While your drive will have only ONE connector, due to the termination requirement,
it MUST be mounted in a SCSI enclosure which will provide:

the cable connector (internal) to the drive
the scsi cable connector to the controller card
the connector for the terminator
AND the scsi address selector {0-7} (never use 0, that's for the controller/internal hd), so typically select (1) as the scsi address
btw, (b-c) can be the upper or the lower connectors, they are not polarized.
 

5 more replies
Answer Match 57.12%

[Seriously need help] External hard disk causes hard drive failures & OS crashes
The thread is rather long. Only read what you think important. Skip the rest!

We have a serious but mysterious problem. We have spent already one week but drawing a blank.
Two hard drives have been crashed and failed (unreadable). One computer has hung a few times unexpectedly and had one weird restart (no memory dump produced).
I suspect all the recent problems have to do with the new USB external hard disk (Buffalo MiniStation Lite: HD-PE250U2).

**********
Formatting USB external hard disk
**********
Originally I would like to use the program given by Buffalo to format the external drive once but we failed. We simply used Windows to reformat the drive into NTFS. I did not use the TurboSpeed advertised by Buffalo, or run its free program.

**********
Case A: Multi-transfer causes system crashes?
**********
The first time we met the problem.
We were trying to help a friend to backup data on an old drive, about a few years old. We plugged in the Buffalo USB portable hard drive and transferred a whole lot of files to the drive. Several cop/cut-and-paste operations were active at that time. The whole system completely froze up. It doesn't respond at all. Only a hard restart could help.
Restarted. Tranferred again. Several cop/cut-and-paste operations were active.
Hard drive crashed - the beginning of the nightmare!
Windows restarted. Chkdsk was running. Saw many lines of messages with:
&... Read more

A:[Seriously need help] External hard disk causes hard drive failures & OS crashes

7 more replies
Answer Match 56.7%

I have just removed the hard drive from the body of my advent laptop which had died with motherboard failure. my question is this, is there a way i can attach this to my new laptop, thrugh a usb or somethink similar in much the same way as an extenal hard drive. Im only asking as there are some photos i would like to transfere to my new laptop. Thanks in advance for any help given.
 

A:Connecting hard drive

Sure, just buy a USB enclosure for the drive and you'll have a backup drive after you recover your data as well.

Here's one of MANY of them on the web: http://cooldrives.stores.yahoo.net/ultra-mini-usb-aluminum-enclosure-with-one-touch-backup.html
 

2 more replies
Answer Match 56.7%

Hi,
I am now using Windows XP in my new PC... nd.. i have been using Windows 98 in my older PC... Now i wanna transfer some of my files in the older one to the newer one... Can I connect my older PC's hard drive to my new PC?... If yes, whats the way... After connecting it how can i access it on my new PC?.. Pls post an answer if anyone knows...
 

A:Connecting another hard drive

You can get a hard drive to USB cable adapter and connect the drive as just another mass storage device on the new computer and copy whatever data you want. You can also hook it up as a non-system drive internally and get the data from it that way. No special method for access is needed.
 

3 more replies
Answer Match 56.7%

I own a seagate usb external 100GB hard drive. I have a internal IDE 60GB hard drive that I want to extract information from. Is there any way to connect the IDE hard drive to my usb segate hard drive ? Thanks in advance !
 

A:connecting hard drive ?

YES>Google ideexternal
 

1 more replies
Answer Match 56.7%

Ok, basically my PCs hard drive needs formatting due to a virus, but I want to try and recover some documents and files I have on there before I do that. I figured Id hook up my hard drive to my Macbook laptop using a hard drive enclosure and store the files I need on there. Just a couple of things I need to know first:

1) Will this work? I know Macs cant write to NTFS partitions, but can they read and copy from them?

2) What kind of enclosure do I need? My hard drives 3.5" SATA, so obviously something that can accept that. I preferably want one with a Firewire port for fast file transfer speeds. Ive looked on Ebay for one but have been slightly confused by all the options I have.

3) Are they easy to use/setup?

Any help or advice would be greatly appreciated
 

A:Connecting a PC hard drive to a Mac

1. It should. Personally, I dual-boot Linux and Windows. Linux is able to read and copy from my Windows hard drive fine, even before I installed an NTFS writer.

2. You shouldn't have much of a problem for getting a HD enclosure. In a few minutes of searching on NewEgg.com, I found this enclosure for $25, and it is just what you are looking for. Plus, it has good reviews.

3. I'm not sure. Theoretically, yes. Just make sure you don't boot from it.
 

2 more replies
Answer Match 55.86%

I'm looking into purchasing a hard drive enclosure/external hard drive...

What's the difference? I have three spare hard drives here; two are clearly marked IDE; and another one that looks like it's probably IDE. But in the stores they have 2.5inch and 3.5inch. what's the difference?

I measured one of the drives, and the "front" side of it is like 4 inches...or is the 2.5/3.5 the diameter of the physical "disk" inside of the enclosure?
 

A:hard drive enclosure/external hard drive

10 more replies