Tech Problem Aggregator

Unaccessible External Hard Drive: Disk 1 Unknown, Not Initialized

Q: Unaccessible External Hard Drive: Disk 1 Unknown, Not Initialized

Hello. Through the power of google, I have come here to see If I can get any help recovering data. Essentially found this thread: disk 1 is unknown, not initialized, unallocated and just having really similar issues.

Issue is with my sisters External Hard drive, a WD My Passport Elite 070B.
Asked her a few questions on how she was using the drive/any issues and she explained that she had to pull the usb plug while still reading/writing because it would hang/freeze (/facepalm)

Downloaded PW Minitool Recovery and EasyRecovery Pro Trial, but haven't really run any lengthy tests yet. Just tried them out for 10 mins to see if anything would show up. Going to leave the computer on tonight and do a full scan though.

Some other things I have tried:
-Tried connecting it to other PC's/Laptops(XP/Vista/Windows 7/OSX). Same thing.
-Tried different USB cables

Any suggestions or things I should try?

A: Unaccessible External Hard Drive: Disk 1 Unknown, Not Initialized

I'm facing the same problem too....
Un-detection of my ext BUFFALO MiniStation HD-PCTU3 3.0

9 more replies
Answer Match 93.9%

Guys please help me to fix my hard disk WD elements 1TB

I have tried so many ways to fix it.. but I got nothing in 4 days!!

I have tried from command prompt " chkdsk /f /r "
the first time I tried it works, but something error occured, and now I can't using that method..
when I tried to using that, just show " cann't open volume for direct access"

my hard disk didn't appear on my computer list, but I can reject it.

and anyway I have tried to using minitool partition wizard, but you all can see that my hdd didn't appear with the volume.. just show up disk 2 with 0.00 GB

Anyone can help me to solving this problem ?

btw, My english isn't good enough..but I hope all of you can understand what I mean

Thanks before.!

A:External hard drive disk unknown n not initialized!

Sorry to say your WD Elements is dead and you have tried everything.There is nothing left for me to do, honestly. I would have done the same thing before declaring it dead.. No DIY data recovery is possible. The only option open to you is to entrust it to Western Digital Data Recovery partners in your region. Check with them whether there is any hope of recovering data in good shape.Telephonic consultation is free.

https://support.wdc.com/Warranty/dat...y.aspx?lang=en

7 more replies
Answer Match 84.6%

I am using windows 8 and I have read previous threads with similar issues that I face but my problem is unique. My 60GB external Hard disk was manufactured by FUJITSU and was taken out of a dell laptop. When I bought a case for it yesterday it was tested in a laptop computer to see if it was working before I paid for the case and it was working properly. However, the owner of the laptop removed the cable without safely ejecting the drive first. Later, I connected it to several computer and it would install and be detected in Device manager, Disk Management and even devices and printers but it does not show in My Computer nor does autoplay options pop up. In disk management it is shown as Disk 1 unknown not initialized as shown in the attached screenshot.

I notice that whenever i open disk management, it prompts me to initialize the disk but when i chose gpt and click ok, this window pops up

when I right click the Disk 1 the initialize option is gray and only offline, properties, and help are available. I used mini partition tool and this is what i get

I am at my wits end. Please assist. I do not need what is inside the hdd. I just want it to work.

A:External Hard disk not initialized, unknown.

"I notice that whenever i open disk management, it prompts me to initialize the disk but when i chose gpt and click ok, this window pops up"

Did you try initialising it as an MBR disk?

5 more replies
Answer Match 83.4%

Hello,

I have run into a problem that has been causing me quite a bit of headache as of late. A week ago, my WD Elements External Hard Disk is not displaying under hard disk drives, but does display under Devices and Printers. This is what it shows under computer management:

I have tried to initialize the disk using MBR and GPT options but failed receiving I/O Disk Error.

Please help, thank you.

More replies
Answer Match 82.8%

Hi,

I'm new to this forum.

My external hard disk (Seagate) is detected in the task bar after connecting, but not visible in "My Computer".

It is visible in Device manager under Disk Drives but not under USB.

There are few threads in this forum which are similar to mine, except that their Drives are visible in the Disk Management as Unallocated Space, mine is not.

SEE ATTACHMENTS !!!!!!!!!

I've tried all tools, tried in Windows XP still no solution.

Is there any way to atleast recover the data !!!!!!!!!

Your reply is appreciated !!!!!!!!

SEE ATTACHMENTS !!!!!!!!!

A:External Hard Disk, Unknown, Not Initialized ! No Unallocated Space.

Hi Pradeep,

Welcome onboard.

" I have tried all tools" - can you please enumerate what all tools?

Have you tried running the Seagate SeaTools for Windows to diagnose/repair.

If not check your external drive now.

5 more replies
Answer Match 81.9%

This quick new hard disk. So sad I cant access it anymore? why this happen?

You can see from the photo MY computer cant even see this driver anymore, so I check on the
- Disk management it said unknown no driver letter too ,Not initialized.
-Click Initialized it said i/o device error

I have try uninstall the device and restart let it install again still the same.
Checking many thread have the same problem, I wonder anyone solve this kind of problem before?
--------------
Update the possible cause of it, I believe my external hard disk spoil because my laptop was low battery and suddenly off either it goes Hibernate or off there is no time to read or write in the hard disk.
Then I just unplug the external hard disk.

If you face this situation don't unplug it, turn on the computer back and do a proper remove or shut down everything.

A:1TWD external hard disk unknown,not initialized,unallocated,i/o error

Is this an external drive attached via a USB hub ??

9 more replies
Answer Match 80.4%

Hi Jumanji,

My external HDD (WD) is not getting recognized in my laptop from last few weeks. I have followed different threads but didn't get any working solution.

I have tried below options:

1. Disk management : Initially showing MBR/GPT options but none worked. After that its showing my external HDD as 'Disk1 unknwon not initialized'.

2. MiniTools Partition Wizard : Installed MiniTools Partition Wizard v9 in my laptop however my external HDD is not showing in the tool as Disk2.

Could you please help me to get the issue resolved or recover the data at least.


Many thanks !!

A:External hard drive is showing 'Unknown Not Initialized'

Welcome onboard.

External HDD - Western Digital Model No/Name: ? Capacity : ?

Please post a screen shot of Windows Disk Management with only the faulty external connected. Disk Management - Post a Screen Capture Image

2 more replies
Answer Match 80.4%

I had a WD 2TB external drive which I transferred successfully to a USB 3.0 enclosure months ago. Then I moved and the drive has been packed away in the trunk of my car since.

I just got it out as I need some files on it, and when I hooked it up it didn't work: the computer recognized it as a CD drive or something... in Computer it would not show up or show up as just a drive letter ... in disk management it said No Media. I tried it on another PC too to no avail.

After much research, the most likely solution looked to be to get a new enclosure. So I did, but the drive still isn't working, but in a different way.

When I first hooked it up, all looked well: the system tray showed correct recognition of the drive and enclosure type/brand and installed the drivers successfully.

But the drive no longer shows up in Computer at all, and in disk management it now prompts me to initialize the disk, and has it marked as Unknown, Not Initialized.

I have spent all day trying to fix this problem, and have read a million threads on different sites and tried everything, to no consequence. I need the files on the drive, and have tried all of the following:

- booting in ubuntu and knoppix via cd - drive is not recognized

- every major app for this type of problem i saw recommended: seagate seatools, partition wizard, wd data lifeguard diagnostics, power data recovery, find and mount, a bunch of stuff on hiren's boot cd, test disk, etc.

In most cases, the drive was not recognized at a... Read more

A:External Hard Drive HELL (Unknown, Not Initialized)

Do NOT initialize it. With a usb stick or dvd Puppy Linux boot firmly in place ready to boot, can you reconnect the WD 2TB drive back to the computer like it was in the old days? Boot Puppy Linux, copy all the data folders and files onto another reliable external media. If that does not work, you might be heading for a local business-oriented computer fix-it place. However, let's see what others here might want to add.

9 more replies
Answer Match 80.4%

I had a WD 2TB external drive which I transferred successfully to a USB 3.0 enclosure months ago. Then I moved and the drive has been packed away in the trunk of my car since.

I just got it out as I need some files on it, and when I hooked it up it didn't work: the computer recognized it as a CD drive or something... in Computer it would not show up or show up as just a drive letter ... in disk management it said No Media. I tried it on another PC too to no avail.

After much research, the most likely solution looked to be to get a new enclosure. So I did, but the drive still isn't working, but in a different way.

When I first hooked it up, all looked well: the system tray showed correct recognition of the drive and enclosure type/brand and installed the drivers successfully.

But the drive no longer shows up in Computer at all, and in disk management it now prompts me to initialize the disk, and has it marked as Unknown, Not Initialized.

I have spent all day trying to fix this problem, and have read a million threads on different sites and tried everything, to no consequence. I need the files on the drive, and have tried all of the following:

- booting in ubuntu and knoppix via cd - drive is not recognized

- every major app for this type of problem i saw recommended: seagate seatools, partition wizard, wd data lifeguard diagnostics, power data recovery, find and mount, a bunch of stuff on hiren's boot cd, test disk, etc.

In most cases, the drive was not recognized at a... Read more

A:External Hard Drive HELL (Unknown, Not Initialized)

Do NOT initialize it. With a usb stick or dvd Puppy Linux boot firmly in place ready to boot, can you reconnect the WD 2TB drive back to the computer like it was in the old days? Boot Puppy Linux, copy all the data folders and files onto another reliable external media. If that does not work, you might be heading for a local business-oriented computer fix-it place. However, let's see what others here might want to add.

9 more replies
Answer Match 102.48%

Hi,

I've been recovering data from three older internal hard drives for a friend, by way of an external HDD enclosure connected via USB to my laptop. It went well for the first two HDDs but the third, well ....

It's a Maxtor DiamondMax 10 HDD, 120 GB and is also marked SATA150.

(1) On most occasions, the HDD in question does not appear under My Computer. Under Devices and Printers, I see the external HDD enclosure as "USB to ATA/ATAPI bridge" (but not the HDD). In Disk Management, I see my internal drives and CD/DVD ROM but for the HDD in question, only "Disk 2, Unknown, Not Initialised" - I get the option to initialise it as MBR or GPT (I cancel at that point).

(2) On rare and seemingly random occasions, my laptop does pick up the HDD as drive F: but usually asks me if I want to format it (nope!). At this point it also appears under Devices and Printers, My Computer and in Disk Management as 'RAW' and 'healthy'.

(3) On three occasions, I have seen the drive name; on two occasions, all of the files - and on one occasion, I was able to copy four files across to my laptop (before losing visibility of it). So I know all the files are there.

However the HDD disconnects itself (or is disconnected) quite quickly, such that I am back to position (1) for the vast majority of the time.

I have tried TestDisk and EaseUS Data Recovery Wizard, which do not see the HDD. I have also tried MiniTool Partition Wizard, which mostly does not see the HDD but on one occa... Read more

More replies
Answer Match 102.48%

Hi, i'm new on this forum. I was searching for an answer to this issue in a lot of threads but i didn't find something to fix it.

I built an external hd using the hard disk of my old laptop (Fujitsu MHV2120AH PL) and a Woxter i-Case 240.

When i connected it via USB i went to the Disk Manager and saw the unit as "Disk 1 Unknown Not Initialized". But there was something else, the disk has a size of 120GB but the Disk Manager shows only 700MB.

The Disk Manager didn't allowed me to format this partition and when I press on "Initialize disk" it didn't do anything.

I used a Linux Live CD and I had the same issue, i tried to create a new partition table but it didn't create it and GParted didn't allow me to create a new partition answering that i need a partition table first.

I tried with Diskpart without any result too.

This HD had an Windows XP installed on the old laptop and before dissamble it i made a quick format with the Bootable CD of my laptop. The quick format was interrupted when the program was copying the files necesary to install Windows XP.

Do you have any idea?

A:Unknown - Not Initialized Disk (External HD)

Hello Matterito!

You could try a couple of things: changing the enclosure, as this one's controller may be corrupt, or hooking up the disk directly to the computer.
Also, see if your USB drivers need updating.








  
Quote: Originally Posted by Matterito


This HD had an Windows XP installed on the old laptop and before dissamble it i made a quick format with the Bootable CD of my laptop. The quick format was interrupted when the program was copying the files necesary to install Windows XP.


Following this, it may be that your disk is just damaged. It could be just that the partition table is corrupted, so may be writing full zeros to the disk and repartitioning and reformatting it would help fix the issue. That is in the case that you don't need the information on the drive.

CK_WD

3 more replies
Answer Match 102.48%

Hi i would like to ask why this happen. My external hard disk is detected by computer but doesn't appear in hard disk panel , it only appears on Devices. When i go to computer management. This is the output. Same when i use it to other computers. please help. im just new here and no good at computers.

External HDD : Western Digital My Passport 0740 (500Gb)

A:Disk 1 unknown not initialized - an external HDD

  
Quote: Originally Posted by empog


Hi i would like to ask why this happen. My external hard disk is detected by computer but doesn't appear in hard disk panel , it only appears on Devices. When i go to computer management. This is the output. Same when i use it to other computers. please help. im just new here and no good at computers.

External HDD : Western Digital My Passport 0740 (500Gb)




Hi empog,

Welcome to Seven forums.

It could be an either an issue with the harddrive itself or it is formatted in a partition which is not recognized by windows.

Once the harddrive is connected open command prompt and type diskpart and hit enter. Then type list disk and hit enter.

Whatever information is displayed kindly post a screenshot for the same.

Screenshots and Files - Upload and Post in Seven Forums

Keep us posted with the results so we can advise you further.

9 more replies
Answer Match 101.22%

I've got 600GB HD (Rock mobile disk) that goes without saying need to be recuperated. It was working fine earlier this summer when I last accessed it. A few weeks ago, I plugged it in again and it gave me an I/O Device Error, read and unspecified error.

I have been researching a solution non stop and today when i plugged it in once again something worst happened, this time I see a External HD not Detected: Disk 1, Unknown, Not Initialized in Disk Management.

Can someone please help?

The irony... we get an external drive to protect our data and not loose it and then this happens

A:External HD not Detected: Disk 1, Unknown, Not Initialized

Try this to salvage what you can from it: Download MiniTool Power Data Recovery Free Edition - MajorGeeks
Do that before any attempts to repair.
If nothing, portable drives are even less reliable than stationary ones and it's interfaces are prone to malfunction.

15 more replies
Answer Match 100.8%

Hi, my toshiba 1tb external drive has become unaccessible after working fine till yesterday. When i plug in the drive the green bar ontop keeping forward and if i click on drive Explorer hangs. It also doesn't disply detail in my computer like free space. On previous threads you have asked for picture of disk management, i cant post it as it becomes unresponsive as soon as i plug in the drive. After searching for a while i am using photorec to recover files but it going slowly. Should i use ddrescue or clonezilla? Any other software?please any help would be appreciated. It is important that i recover my files.

A:External hard disk unaccessible

You could try burning a light weight linux distro to a CD such as Puppy Linux and see if your ext HDD is recognized along with the files.
https://www.winhelp.us/kaseke/recove...ppy-linux.html
Note when you mount partitions with puppy linux you can simply drag and drop folders from source to destination. When you drop you get options - select the copy not move.

9 more replies
Answer Match 100.38%

1. Disk management showing disk 1 -unknown- -not initialized-

2. When i tried to initialized it show -incorrect function-

3. I tried the recovery software but all of them cant detect my external HDD

4. The Data Lifeguard Diagnostic from western digital managed to detect my external and showing there is bad sector but when i tried to repair, it give me this message -unable to repair bad sector-

Please help!!! is there any chance i can fix this?

A:Please help,disk 1 unknown not initialized (western digital external)

I guess there is mechanical problem with the hard drive. you can try checking and repairing bad sectors (http://www.articlesbase.com/hardware...s-6907958.html), or just send it to some drive repair center.
but, if there is important files on the drive, you'll have to recover data before repairing it.

2 more replies
Answer Match 97.86%

Hello to All,
I have a 500 GB external USB drive that I can't access on my wife's Windows 8.1 laptop. I have confirmed that is in good operating condition on my XP PC where I can access all my files but in Computer Management on the Windows 8.1 laptop it displays as Disk 1 with a red arrow pointing down and it says Unknown and Not Initialized. Can someone help?
Thanks
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz, Intel64 Family 6 Model 69 Stepping 1
Processor Count: 4
RAM: 7908 Mb
Graphics Card: Intel(R) HD Graphics Family, -1984 Mb
Hard Drives: C: Total - 940362 MB, Free - 902392 MB;
Motherboard: Dell Inc., Inspiron 5537
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
 

A:External USB Drive Unknown and Not Initialized

With the USB drive plugged in, go to Control Panel > Device Manager. Then see if there are any yellow exclamation marks. Try right click, update driver.
 

3 more replies
Answer Match 97.02%

Yesterday, I was working with my PC while my 1TB Seagate external hard (Amazon.com: Seagate FreeAgent GoFlex 1 TB USB 3.0 Ultra-Portable External Hard Drive in Black STAA1000101: Electronics) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:



After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.

A:FreeAgent External Hard stopped working (unknown, not initialized)

Here are the screen-shots and images again:

6 more replies
Answer Match 97.02%

Hey

Yesterday, I was working with my PC while my 1TB Seagate external hard (http://www.amazon.com/Seagate-FreeAgent-Ultra-Portable-External-STAA1000101/dp/B0045JLPMO) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:

After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.
I searched and read lots of threads and tested some other stuff:

(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.
 

A:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

7 more replies
Answer Match 97.02%

Hey,

Yesterday, I was working with my PC while my 1TB Seagate external hard (http://www.amazon.com/Seagate-FreeAgent-Ultra-Portable-External-STAA1000101/dp/B0045JLPMO) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:




After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.
 

A:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

Hi there Sedhadi,

If your HDD is failing the manufacturer's tests it is probably dead. IF you need to get your data back look for a reputable data recovery company in the area.
Hope that helps.
 

1 more replies
Answer Match 97.02%

It is my brother's hard drive & it has very important data related to his working. It is a 2tb WD my passport ultra external hard disk which was used as NTFS with only one partition.
My brother told me that he deleted some data from the drive by mistake and was recovering the data from the drive but all the windows recovery programs he used just hanged after few minutes (which is also a sign of bad sectors). Then he done the blundered mistake by formatting the drive, the formatting also not completed due to hang situation.

Now the current situation is that the drive is not showing in the windows explorer and when I open the disk management ,the popup came up for initializing the disk either as MBR or GPT. When I try to initialize the disk, it gives me this error:- "The request failed due to a fatal device hardware error". I have attached a few screenshots below.

I have tried cloning the drive with clonezilla, tried booting the drive with parted magic, Hire n boot and system rescue CD but neither of them recognized the drive and some also rejected to boot with the drive attached.
Now currently i am scanning this disc for recovering the lost partition in the 'Partition Recovery Wizard' software according to the advice on some old thread here, but this software has detected my disk as 'bad Disk' in the file System column as you can see in the fifth image, so i don't have much hope with this software.

Please tell me if there is any hope left for drive like try... Read more

A:wd 2tb external drive - unknown, not initialized and unallocated

Hello nsingla and I am sorry you and your brother have this problem!

Things don't look so good now. You've done and tried a lot with aim you need, still looks like the drive's partition table and/or file system are corrupted to a stage that prevents other software to work correctly onto the drive.

I could additionally suggest trying to scan and repair the drive. Try downloading the WD ultra Drive Utilities for Windows and see if you could repair the drive:

Support Answers

If nothing works, the drive is probably too damaged and beyond repair. Hope this is not the case. But perhaps the worst part for the drive was the formatting attempt. Which, by definition, would delete everything from the HDD.

Good luck and post back with results!

CK_WD

4 more replies
Answer Match 96.18%

I have an WD 1TB hard disk which failed to initialize recently. It gives me an I/O error message. I found a few old threads here with similar problem and tried out the suggested steps. I ran WD diagnostic tool and passed the Quick test and Extended test(Screenshot attached). I would like to avoid the zero test and formatting of my data if possible. The hard disk is almost full and recovering them after formatting would be really painful. I would be really grateful if someone could please help me out?

A:1TB WD external hard disk not initialized

Is you have a empty hard drive kicking about or somewhere to store you data, move it all to there.
Then format you drive, see if that works.

9 more replies
Answer Match 95.34%

I see the external disk in Disk Management but it is not getting displayed in My Computer nor any data recovery software is detecting it :(
Image attached..
When I right click on disk 1 Initialize Disk option is also disabled.

Please help!
-Zia

A:Seagate external hard disk not getting initialized

What are the other options when you right click on the disk?

4 more replies
Answer Match 94.92%

I ran BIOS diagnostics on a Dell OptiPlex 3010 yesterday and received an error code (2000-0142) - short self test unsuccessful. I pulled the drive and swapped a new SATA drive to get the user back up and running quickly. I'm trying to connect the drive with the error to my laptop using a StarTech USB 2.0 to IDE SATA Adapter. When I open Disk Management I see Disk 0 (my laptop drive) and Disk 1 (the connected drive). It says Unknown / Not Initialized. When I right click and try to initialize it says "The device is not ready." I've tried the more actions > refresh / rescan. Now when I right click the option to Initialize Disk is grayed out and I can only see Offline and Properties.

I browsed through a thread from about 2 years ago and couldn't find a helpful solution.

The drive: Western Digital 250GB SATA / 16MB Cache - WD2500AAKX

A:Disk Management - Unknown / Not Initialized Drive

Have you attempted to run Western Digital's Data Lifeguard diagnostic software? It has a short test and an extended test.

Are you trying to recover anything from this drive? Or just trying to find out if it's broken?

9 more replies
Answer Match 93.66%

Hi.
My external (seagate) hard drive can be detected, but it won't show on My Computer. I tried few options however the device is still not being recognised.

It appears in my device manager. I have uninstalled it, plug my hard drive back. It gets detected, but it still won't appear in My Computer.

It also appears in disk management. It's shows as Disk 1 Unknown, Not Initialised and the right column is blank.

I downloaded the MiniTool Partition Wizard and attempted to recover my data. I completed all the steps expect the last step as I can't right click to give the drive a letter.

I have important unbacked information on this device. Any help would greatly be appreciated. Thanks

A:External Hard Drive Not Detecting. Disk 1 Unknown.

Hello Liyah,

Your screenshots are two small to be able to read.

For now in Disk Management, see if you area able to right click on the smaller Disk 1 box in the lower pane, and click on an Online or Initialize option in the context menu. Afterwards, make sure the disk has a drive letter.

Disk - Set as Offline or Online

Hope this helps for now,
Shawn

9 more replies
Answer Match 92.82%

I had a WD 2TB external drive which I transferred successfully to a USB 3.0 enclosure months ago. Then I moved and the drive has been packed away in the trunk of my car since.

I just got it out as I need some files on it, and when I hooked it up it didn't work: the computer recognized it as a CD drive or something... in Computer it would not show up or show up as just a drive letter ... in disk management it said No Media. I tried it on another PC too to no avail.

After much research, the most likely solution looked to be to get a new enclosure. So I did, but the drive still isn't working, but in a different way.

When I first hooked it up, all looked well: the system tray showed correct recognition of the drive and enclosure type/brand and installed the drivers successfully.

But the drive no longer shows up in Computer at all, and in disk management it now prompts me to initialize the disk, and has it marked as Unknown, Not Initialized.

I have spent all day trying to fix this problem, and have read a million threads on different sites and tried everything, to no consequence. I need the files on the drive, and have tried all of the following:

- booting in ubuntu and knoppix via cd - drive is not recognized

- every major app for this type of problem i saw recommended: seagate seatools, partition wizard, wd data lifeguard diagnostics, power data recovery, find and mount, a bunch of stuff on hiren's boot cd, test disk, etc.

In most cases, the drive was no... Read more

More replies
Answer Match 92.82%

I had a WD 2TB external drive which I transferred successfully to a USB 3.0 enclosure months ago. Then I moved and the drive has been packed away in the trunk of my car since.

I just got it out as I need some files on it, and when I hooked it up it didn't work: the computer recognized it as a CD drive or something... in Computer it would not show up or show up as just a drive letter ... in disk management it said No Media. I tried it on another PC too to no avail.

After much research, the most likely solution looked to be to get a new enclosure. So I did, but the drive still isn't working, but in a different way.

When I first hooked it up, all looked well: the system tray showed correct recognition of the drive and enclosure type/brand and installed the drivers successfully.

But the drive no longer shows up in Computer at all, and in disk management it now prompts me to initialize the disk, and has it marked as Unknown, Not Initialized.

I have spent all day trying to fix this problem, and have read a million threads on different sites and tried everything, to no consequence. I need the files on the drive, and have tried all of the following:

- booting in ubuntu and knoppix via cd - drive is not recognized

- every major app for this type of problem i saw recommended: seagate seatools, partition wizard, wd data lifeguard diagnostics, power data recovery, find and mount, a bunch of stuff on hiren's boot cd, test disk, etc.

In most cases, the drive was no... Read more

More replies
Answer Match 91.56%

Hi, thanks for trying to help me with this.

I recently moved and had my external hard drive disconnected and in storage for several months. It is a Western Digital model# WD500H1U-00. It has a separate power supply. There is a blue light on the front that is illuminated all the time, except when I connect the HD, then it will flash. When I got unpacked I hooked it up to my desk top and the computer would not access it. I then tried to install it on my laptop with no success. Since then I purchased a USB cord, with no luck.

This hard drive has a LOT of irreplaceable information on it. Formatting it is not an option.

Kevin at SpywareHammer.com was helping me with some other stuff and suggested I:

Regarding the ext HD, try this please:

1) Control panel===>administrative tools===>computer management===>Disk management

2) You'll Should see a list of Disks, Is Disk 1 listed with no partition letter assigned? if so continue

3) Right mouse click into the disk field, select Change drive letter and paths ===> choose a letter from the drop down, select OK. the HD should now be available.

No luck here either. When I right click on the disk field nothing happens. When I right click on the title block(?) I get: Initialize Disk (faded), Offline, Properties and, Help.
... Read more

A:WD external hard drive not initialized.

I also downloaded "MiniTool Partition Wizard Home Edition". That program did not recognize the HD.

9 more replies
Answer Match 91.56%

Hi all,

I'm having an issue where my external hard drive (WD Passport Ultra 2TB) is not displaying in my computer and is not initialized in Disk Management. This occurred after my computer crashed while I was pulling out data from the external hard drive. Now when I plug in the external hard drive, it has a clicking sound for a few seconds then stops with a blinking light.

I have tried using the MiniTool Partition Wizard and it does not detect it. When I open up Disk Management, it says that I need to initialize the disk before I can access it. I read somewhere that I will lose my files if I initialize this, so I have not done so. The Disk Management also does not show any unallocated space in it. Please see attached image.

Currently I just want to take out all the data from this hard drive before I let this drive go if I can't save it. Is there any hope for me to save my files?

Best regards,
Jeefster

More replies
Answer Match 91.56%

Hi,

My problem is as follows:
External Hard Drive (1Tb WD Elements) that I've been using for a few months now has data on that I would very much like to keep.
It was working fine until yesterday in which I tried opening a VS project which became unresponsive, tried closing everything down and turning off computer which just froze the computer leading to a hard reset (button held for 5 seconds)

Since then the External Hard Drive has not been shown in Windows Explorer and in Disk Management is shown as "Unkown" and "Not Initialized"


The Drive will still be seen correctly in Device Manager and if uninstalled it will say it has correctly installed and is ready to use.


Attempts to recover data or Initialize the drive have not worked and I have followed and looked up multiple ways to recover and other similar cases. I'm fairly certain for the data recovery the drive needs to be initialized (which just throws me an I/O error upon attempting the process) as looking at the Volume section in the properties of the device the size of the drive is listed as 0Mb.


My Last resort is taking it to a data recovery shop and hope they can grab the stuff on there.

Any help is muchly appreciated thanks.

A:External Hard Drive Not Initialized

I'm not up on WD Elements. Did that HD come with a form of Smartware, and in that Smartware, was there a utility that would come up and either ask you to type in the user-assigned password or it would automatically type in the saved password and pass same onto The System -- and unlock the WD Elements? I ask because I'm a little familiar with WD Passport, not WD Elements.

2 more replies
Answer Match 90.72%

I have a external hard drive that's not initialized, but it recognizes with a messages pops up saying my drive is ready for use, but it doesn't show up under My Computer. I have a Windows 7 desktop PC that is a Home Premium 32-bit Anytime Upgrade. I'm thinking it's not fried, and I'm thinking that way because I received the message it found new hardware and ready to use? Or is it dead?

Also, I don't have a spare enclosure, and tools to open it up, so taking it out of the enclosure would be out of the question.

Thank you for any help!
 

A:Solved: External hard drive not initialized?

10 more replies
Answer Match 90.72%

Hello,
first of all I would just like to point out that I am not a native speaker so I apologize in advance for the mistakes I might make.
I have a problem with my external hard drive. The drive is Verbatim 47512. Last year I unplugged the drive without safely removing it first. When I plugged it in again it asked me to format the drive. As I didn't wanna loose my files I tried using Recuva and it worked. However, the process took too long and I was leaving for ten months the next day so I had to stop the process. I wanted to continue when I got back but the drive wasn't working at all. I couldn't even turn it on. I kept trying and after some time it started to work again. When I plug it in, I can't find it in my computer. But I can find it in the disk management. I'm attaching a picture, it says it's uninitialized and that it needs to be initialized. I don't know what it means and I'm scared it might delete my files. It also says that it's allocated and unknown. https://postimg.org/image/zci27fe6h/
I downloaded MiniTool Partition Wizard and it says that my disk is bad. I don't know how to proceed, can you please help me? Or should I give up?
https://s3.postimg.io/mkjzqz85f/Bez_n_zvu.jpg

A:External hard drive- not initialized, allocated

Welcome to the forum if it's blank it's lost the partition you need specific partition recovery software you don't want normal recovery once the partition is recovered file should be there if you Google free partition recovery there is lots of good free ones

1 more replies
Answer Match 87.78%

Have a 1TB Iomega USB3 external hard drive that worked well on both a desktop and laptop Win7/64 system. Now it shows up as unidentified and not initialized using computer/manage/storage/disk management. Disk Management also gives the optiin to initialize it but I declined because I would like to recover the data. The power light comes on and it spins up with both a USB3 or USB2 connections and is identified as an Iomega eGo drive when I use the USB eject function.
Hard Drive Sentinel does not recognize it at all. Any suggestions appreciated.

A:Previously functional USB3 external hard drive shows not initialized

1. Please post a screenshot of Disk Management with your external HDD plugged in. Disk Management - Post a Screen Capture Image

2. It would indeed be prudent to recover the data before you try anything else on the HDD.

You may try to access the hard drive booting into a live Linux CD/pendrive.

Download Lucid Puppy (Ubuntu-Compatible Build) v5.2.8 ISO from http://puppylinux.org/main/Download%20Latest%20Release.htm

It is light and only 132.6 MB.

Make a Bootable pendrive with Rufus v1.3.2 (442 KB) http://rufus.akeo.ie/

It takes less than 2 minutes to create your bootable live Linux pendrive.

For more guidance on the recovery process directly get into the heading Recovering files from the non-bootable Internal Drive - applicable to recovery from any hard drive - in Lucid Puppy way to recover files from a non-bootable computer

You may also use this tutorial by Golden http://www.sevenforums.com/tutorials/256518-peppermint3-create-live-cd-dvd-usb-use-emergency-backup.html to create your bootable pendrive with Peppermint3 Linux.

Lucid Puppy or Peppermint3, in either case you can use Rufus to create your bootable pendrive.

9 more replies
Answer Match 83.16%

Please help me fix this problem. any information you need just ask me i will tell you all you need.

Thanks in advance

A:How do i fix unknown, not initialized and unallocated external hd?

Right click on it and choose Create Parittion. Choose the type of partition. Then format it. I recommend doing the slow format. It may take an hour or so, but I think you're better off in the long run.

9 more replies
Answer Match 83.16%

Hey guys,

I have this new Western Digital My Book that I got about 6 months ago and it suddenly will not show up when I plug it in. I tried looking for solutions on what's happening but I can't get past the first few steps, until I found one where it says that the drive is probably toasted! Anyway, I'm still not giving up hope. I tried it on two computers, I tried uninstalling and reinstalling the driver but it's still the same. I tried initializing it and it's giving me "The request could not be performed because of an I/O device error". I would like to chkdsk it but I forgot what the drive letter of the hard drive, so I can't really search it.

Here're some screenshots.


Also didthis :

Thanks for your time!

More replies
Answer Match 83.16%

Please help me to get my important data from my bad hard disk,

I have a segate 500 GB usb external HDD, It was working fine since last 3 years. yesterday i connect this to a XP machine, and start coping some data. the coping speed was very slow, so I restarted the machine in between. After that I LOST MY hdd, it never be back. I tried a lot.. no success till now.
Please help me get my data back:

A:How do i fix unknown, not initialized and unallocated external hd?

Sorry to be the bearer of bad news ... but I had almost exactly the same thing happen to me on a Seagate 2TB hard drive. Working for months, even passing surface checks with no errors and then, one day -- "bad disk".

I've tried every data recovery app I could find against it (4 of them) and none of them find anything.

I've had drives fail me over the years and have never run into this situation where the drive powers up but NOTHING can be recovered from it.

So, I've resorted to sending it off to a local data recovery outfit

9 more replies
Answer Match 82.32%

Hi, thanks for reading this and thanks for your help.

My laptop took a fall and after that it doesnt enter the boot sequence for windows, stops at the laptop manufacturer logo.

I remove my hdd from the laptop and put into a external drive i keep for this purpose, checking hdd?s.

I can?t find the drive in my computer but I can see it in disk managment. It says Disk unknown - not initialized.

I?ve tried using PW but i cant see the drive on there. I would really like to keep my files I have on that drive but it seems to me that it toast.

Regards...

A:Disk unknown - not initialized

Quote:
My laptop took a fall and after that it doesnt enter the boot sequence for windows, stops at the laptop manufacturer logo.


That is bad news mate. Usually a mechanical HDD won't survive physical shock like dropping etc. This is because of the microscopical gap between the head and platter. Heads flying height on modern HDDs is about 5-10 nano-meters. For example: an average human's hair is about 25000 nano-meters in diameter. A drop will most likely cause the head to stuck on platter or cause scratches on platter surface.
I would suggest diagnosing the HDD using "Seagate Seatool" and verifying it's health.

SeaTools for Windows | Seagate
Run the tool and select your external HDD for testing. Then choose "Basic Tests --> Shot Generic" and wait for it to finish.

If the test is a pass, run "Basic Tests --> Long Generic". If either of the test fails, the case will be beyond DIY and you should consult a data recovery pro for recovery.

1 more replies
Answer Match 82.32%

Hi, My DVD Recorder died, so I took out the HDD Seagate DB35.2 and plugged it in my laptop. I get the above message in disk management. I also tried Knoppix 7.0 but the disk does not show up. My scope is to save the content in the disk and move it to my PC, is it a mission impossible? Any suggestion is very welcome. Thanks Alex

A:Disk 1 Unknown, Not Initialized

I'm not sure you will have much luck if the disk is not readable. You can usually use a Linux distro to try to read it, but you've tried that. If it can be read you can also try Copy & Paste - in Windows Recovery Console. Other than that you could try Recuva and see if that will work. But, if the disk can't be read, I'm afraid there is nothing you can do if those 3 options don't help.

9 more replies
Answer Match 82.32%

I have a 1TB external my passport USB hard disk.It was working fine till last week but when i plugged it in today windows 7 didn't recognize it.I can see the hard disk in Disk management as "Disk1 Unknown Not initialized" but can't see it under my computer.Also the hard disk light is blinking continuously .When i plug it in USB port it tries to read data and the there is a clicking sound.It clicks few times and then it goes completely silent.
I have tried using various partition tools like MiniPartation and TestDisc etc but they don't even recognize the hard disk

Any help is much appreciated. My priority is recovering data I can buy a new hdd if i can recover data.
Please let me know if u need more info.I am posting a screenshot of disk manager for reference.

Thanks!!!!

A:Disk1 Unknown Not Initialized error for external HDD

My Passport is Western Digital. Isn't it?

I am not placing much hopes on your drive. It doesn't even show the capacity.

Anyway let us check your drive with Datalifeguard Diagnostics for DOS.

Please see this post and execute. Please help,disk 1 unknown not initialized (western digital external)

9 more replies
Answer Match 82.32%

My external HDD has crashed after unplugging it accidentally while using it. I believe the directory structure has been corrupted. The external HDD shows Unknown, no size, and Not Initialized on the Disk Management screen:

I have tried using MiniTool Partition Wizard as described in this thread.

I'm not sure where to go now to try to recover the data on this HDD.

Thanks for your help in advance.

A:External HDD shows Unknown, no size, Not Initialized

Try the Data Recovery tool of Partition Wizard.

4 more replies
Answer Match 81.48%

Hi

I have the same problem. when i plug in the drive, it says that its succesfully installed however it does not appear in "my computer". also when i go into system tools it says that disk 1 is unknown, not initialized, unallocated

can you please help me, i dont want to lose my data, it contain all my pics. please help

A:disk 1 is unknown, not initialized, unallocated

Hello Jenny, and welcome to Seven Forums.

What type of drive is it, and how is it being connected?

Please go ahead and post a screenshot showing the full layout of your Disk Management window to see if that may help ID what the issue could be.

Disk Management - Post a Screen Capture Image

9 more replies
Answer Match 81.48%

This 2.5" SATA drive is from a Toshiba that seems to have died this morning. There's no boot, no BIOS, nada.
I removed the drive and attached it via USB to my Win7 box where it shows as "Unknown, Not initialized, and offline." There are no rt-click options in disk management. I can hear the drive spinning, but it shuts down on its own occasionally, and sometimes won't power up at all without a bit of fiddiling.
I can't get any response at all from my Linux box, and neither Test Disk nor Recuva finds it at all.
Is there anything else to do, or is this drive dead, as I suspect it is?
 

A:Disk unknown, offline, not initialized.

If it's not being recognized properly, there isn't anything else that you can do.
 

1 more replies
Answer Match 81.48%

Disk 1 is unknown, not initialized, unallocated, Please help
disk 1 is unknown, not initialized, unallocated.. plizz help
I already use PhotoRec recovery but "disk capacity not correctly detected"
Disk 1 = seagate 500Gb hdd

A:Disk 1 is unknown, not initialized, unallocated, Please help

Start with this free tool. You should try to recover the partition before worrying about recovering the data. If you can recover the partition, the files should be OK if they haven't been over-written.

Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition.

Select Partition Recovery Wizard. Choose the drive, then full disk, quick scan. Quick Scan may take 5 or more hours.

If the partition is eventually found, select and double click on it. You should then see all files in the Explorer.

9 more replies
Answer Match 81.48%

Hello
I got my 1tB WD external disk and it's not working as it used to. The problem came from nowhere, suddenly, totally unexpected. There is/was my precious data on it which I collected for 10+ years and I'd like not to lose it.

Origin:
It was working fine a day ago, no problems occured. Hasn't been unplugged since then. Has never fallen. Has never had any kind of error. But: I've seen some kind of ".COM not responding" problem on my PC (don't remember, closed it immediately). I believe my laptop is in a good and healthy condition.

So, what my WD HDD does is:
- it can be seen as a device by my computer. I can plug it out safely.
- diode shows that it's working (not showing the data transfer activity)
- nothing else

What I see in Device Management/Storage is (as in the title):
Screenshot by Lightshot

What programs I used to try to restore partition:
- Mini tool Partition Recovery Home Edition (quick and deep scan, no results. Shows disk as a Bad Disk)
http://prntscr.com/2wpy8s
- Mini tool Power Data Recovery (pro, non-free tool, however after scan there was no results)
- Find and Mount (no results)
- TestDisk (quick and deep scan, no results)

What I haven't tried doing is connecting the HDD directly to the laptop.

Any suggestions?

A:External HDD shows as Unknown, Not initialized, Unallocated. Restore?

You should try directly conmcting it. If that does not work, try this: Recover a flash drive turned RAW ? Partition Wizard and TestDisk. Do recovery with partition wizard. (Don't mind the name) But if that does not work, your drive is dead. Like a wise man said, backup, backup, backup!

4 more replies
Answer Match 81.06%

Hi. I was looking for some solutions for my hard disk and i ended up here looking for something. Please help on the issue.

1. I was using my my Hard Disk , it was connected and i an restarted my laptop. After it was on the laptop did not recognised the hard disk and i was unable to see it annwhere.

2. I troubleshooted it and saw a a yellow color triangle on WD SES Device . In Disk Management tab also it was not recognised. I uninstalled the SES Driver and and did a lot of things Finally the Hard disk was Recognised in Disk Management Tab as " DISK 2 - Unknown , and it wanted me to initialize the Hard " Disk. (Screenshot Added)

3. I also used various Software to recover my Data ( Data Rescue , EaseUS , iCare , Ontrack ) most of them showed Bad LBA (Sector 1) and so on, some even stopped after clicking on the Hard disk. Current i am running EaseUS and iCare, It will take 3-4 hrs to complete.

4. I Also used WD Drice Utility Software and it Showed me a " SMART Status Failed" and on Run Quick/Complete Drive test its not responsive. (Screenshot Added).


Please Help me on this Issue as i think the HD is not dead as of now and something can be done.

More replies
Answer Match 80.64%

I have this 160GB hard drive that I have not been using for a while, yet I am very sure it was working fine the last time I used it.

Today when I plugged it in to my new notebook that is running Windows 8.1 now, it doesn't detect my hard drive. I also tried on other notebook and it has the same issue. So I know the problem is most likely on the hard drive.

Using Command Prompt, it says Disk 1's status is "Online", but size is "0".

Here is the status at Computer Management:
Disk 1
Unknown
Not Initialized

I also tried to Initialize on MBR, but it returned me with "Incorrect function." message.

I tried "Troubleshoot" and the result says:
"USB Mass Storage Device is an older USB device and might not work with USB 3.0
Plug the device into an available USB 2.0 port..."
My notebook has 3 USB ports where according to the manual, 2 of them are backward compatible to 2.0... I tested on each, but it is still not working.

What should I do? Although I have not been using it for a while, I wish to check the content first before formatting it. I might have some forgotten, yet important files within.

Thanks in advance. Hope I can be assisted here.

A:HDD not Detected: Disk 1, Unknown, Not Initialized, Online

If the controller in the enclosure failed removing the drive and slaving it into a desktop PC may let you recover your files. If the drive failed there isn't much you can do.

52 more replies
Answer Match 80.64%

Hello,

I have used the tittle from another thread as my issue is very similar, only none of what is posted there worked for me.

So I have a WD 500gb HDD. (Actually I am not 100% sure it is a HDD and not a SDD)
I have plugged it in various PC and laptops. When doing so, you get the usual sound que. It also installs the driver according to the little pop up window.
However after that, the drive is not visible in "My Computer".

When I check the drive in Computer Management>Disk Management, it wants me to initialise the disk. Which, I know I do not want to do (thanks to one of your earlier posts) as this will over write my data.
In Disk Management the disk is "Unknown" and "Not Initialised" It also does not give any volume. Pics of both of these attached.

I have tried using Partition Wisord free. It does not even see the drive.
I have tried using Photorec. It does not see the drive.
I have used R-Studio. It does see the disk, but I am not able to scan it. Again also no disk volume. Again Picture attached.

I am hopeful for a solution, as I feel like the symptoms suggest that I do not have a head misalignment. But I might be wrong on that.

Hoping for someone with some mad skills to help me out here.

Thanks in advance!
Variable

More replies
Answer Match 80.64%

I am experiencing the same issue as with jenny123 but with an additional problem. I am troubleshooting a Seagate FreeAgent GoFlex 1TB external hard drive for my buddy. It is previously working but one day, it is not detected anymore by any device. It is found in the Disk Management however, it is listed as Unknown, Not Initialized, and not showing the partition as shown in the screenshot.


When I try to change it from Offline to Online, I am encountering the error:
"Virtual Disk Manager: The system cannot find the file specified"

I also used the DISKPART in cmd but it is not showing Disk 1 as shown below.


The external hard drive is found in disk drives but it is not showing it's model name.


I tried all the recommended software (partition wizard, testdisk, icare) but still no luck. I also tried searching online for an answer but there's no closure to their issues as well. Hope someone can help on this as he need a) the drive and b) recover the files in the external drive. Thanks!

EDIT: The drive can be seen in the Devices and Printers as shown below.

A:Disk unknown, not initialized, and not showing partition

Hi

For any serious troubleshooting, diagnostics or recovery attempt, you should always connect an HDD to a direct SATA port. Usually you can easily remove the header of any Seagate Golex drive and then connect it to an internal SATA port.

Let us know what "Disk Management" reports when you connect the drive directly.

4 more replies
Answer Match 80.64%

I have a Samsung external hard disk drive.
It doesn't detect on Explorer.

System Specifications

OS: Windows 10 - 64 bit
Notebook Model Dell - Inspiron 14 - 5000 series (i7 processor intel)
External HD - Samsung M3 Portable

DISK MANAGEMENT

Sometimes it appears on diskmgmt.msc, but sometimes does not.
Right now it's appearing as "Disk 1 - Unknown - Not Initialised"


DEVICE MANAGEMENT

I can see my hard disk under "Disk Drives" as "Samsung M3 Portable USB Device".
DEVICES AND PRINTERS

My external hd appears in "Devices and Printers" under "Devices".
But cannot be accessed.


MINITOOL - PARTITION RECOVERY

It finds the HDD, but "Partition Recovery Wizard" is not able to recover it.

ALREADY TRIED
Using another cable;
Connecting it in another computer;
Restarted computer several times;
MiniTool - Partition Wizard Free;

A:Disk 1 Unknown, Not Initialized - Samsung M3 Portable

Hi rafaelvidal,

Welcome to SevenForums,

1. Complete details of your Samsung M3. Model no: ?? Capacity ??
2. Screenshots: Screenshots and Files - Upload and Post in Seven Forums
3. No overlapping screenshots. In the Partition Wizard screenshot I can't see what is behind except that it is an MBR drive.

Please redo your post for the folks here to understand and help you. If you are not in the Americas please change the timezone (UserCP) so that we get to know whether you are sleeping or awake.

1 more replies
Answer Match 80.64%

I am trying to recover data from laptop internal HDD use as an external hard drive to recover data from that HDD. I can't see my HDD in my computer but in DISK Managemnet, there is a message, "Disk 1 Unknown Not Initizalized"

Please Help!!

Thanks,

A:Recover Data from Disk that is unknown and not initialized

If the data is critical, and it sounds like it is.. the first thing I would do is use a software that makes a sector by sector backup or image of that uninitialized drive. That way if trying to make it readable by initializing it should hose it, you have a copy.

After that, if you know that the unititialized drive was at one time formatted NTFS then you might try initializing it with Partition Wizard freeware

But it may be worthwhile to talk to someone well versed in disk recovery. There may even be some dedicated forums around for that specialty.

If you get lucky and the Partition Wizard initialization shortcut works, then the files should be there after doing a non-destructive format as NTFS file system.

Assuming that's what it was to begin with.

3 more replies
Answer Match 79.8%

Hard Disk - One Partition Unaccessible...!!!

Hi

I have attached three hard disks and have booted from one hard disk...but why one of
partition (partition J ) of another hard disk is not getting accessed from the hard disk
from which i have booted.

Normally i was able to access it in the past. Restarted but does not help. Also when I try
to access the same partition J by booting from its own hard disk; its accessible; this
means there is nothing wrong in partition J.

Any idea / suggestion as to how i can access partition J data while being booted from
another hard disk.

Thanks for ur anticipated help.

Best Regards

sunandoghosh

sunandoghosh at gmail dot com

p.s. The relevant screenshots are attached below:


 

A:Hard Disk - One Partition Unaccessible...!!!

Looking at your disk management screen, I'd venture that it needs to be formatted.
 

2 more replies
Answer Match 79.38%

Guys i have a similar problem but unlike the problem above my partition magic software does not read my external HD.. The device manager shows the HD is working properly.. and the disk manager shows DISK1 unknown and not initialized.. i m giving screen shot for both of them.. My external HD is WD 1TB HD.. it does not matter if i lose the data..but i want the HD to work[ATTACH][/ATTACH]

A:disk manager shows DISK1 unknown and not initialized

I had a Seagate drive fail suddenly last week -- a lot like the situation you described, and neither the Seagate nor the WD drive diagnostics even see the drive when it's in an external drive caddy. When I connect it to an internal drive cable, I get a SMART error and the PC hangs on the boot.

Have also tried Minitool Partition Wizard and some other data recovery apps, which CAN see the external drive, but they can't find or recover any partitions.

Suggest you check with Minitool as they offer a free trial of a data recovery app that might work for you.

This is the first time in years that I've had a drive fail and NONE of the data recovery apps have been able to find anything on the drive.

I've resorted to sending it off to a local data recovery service and am awaiting a quote.

1 more replies
Answer Match 78.54%

Hi all, Let me start off by saying i have spent the last few hours looking online for anything that would be able to help sort out my problem and found your forum the most helpful and the only one i have signed up to. So thankyou in advance.

I have a WD1200D036 (2.5 120GB external) that is not showing in My Computer nor was it showing up in DM but after going to device management\Disk Drives then Volumes tab and clicking on Populate it turned up in Disk Management as: Disk 1 Unkown not initialized. when i click on it and select initialize disk it opens up and asks me to select disk 1 and what partition style (I just sent with MBR) then click ok. It pops up with a error "Incorrect Function"

Any ideas??

A:Exteranl HDD - Unknown, Not Initialized and no disc size in Disk Manag

Hi

I would suggest verifying the health condition of your hard drive first. You can use "WD Data Life Guard Diagnostic" to do that.

Download : WD Support / Downloads / Legacy Internal / WD RE2

The WD tool will list both your internal HDD and USB HDD for testing. Select the USB one and choose "Extended Test" to run. Let us know the test result in next reply.

https://www.youtube.com/watch?v=h-BkCVTAmL8

2 more replies
Answer Match 77.7%

Hello

I am trying to recover data from my external HD 1 TB Fantom Drive GreenDrive. It crashed and I had no choice to force power down. When I look into Disk Management - I see that Disk 1 Unknown Size Not Initialized.

See Disk Man.JPG for printscreen of Disk Management.

I tried following the Mini Partition Tool advice and did not find the external drive on the software. Please see Mini Partion Tool.JPG for print screen.

I am thinking about buying another external HD 2TB and clone this drive to recover the data. Any advice to clone a drive that I cannot select.

Thanks in advance for your help!

A:Fantom Drives GreenDrive Disk 1 Unknown, Not Initialized - Data Recove

Quote:
It crashed


I've seen that and the HDDs had truly crashed, wasn't anything I could do but in a couple of instances I sent them off to a firm that recovers data if the platters/disks in them haven't been physically damaged. Sometimes the read-write heads will scratch the platters and they are then truly screwed up.

8 more replies
Answer Match 77.7%

Hi guys. I'm new here. I've tried to read all the discussion about how to fix the unallocated hard drive but I just can't understand it as the cases were pretty much different than I'm facing of.

Here's my problem.
Yesterday my external hard drive seems normal, everything is fine, until there's a blackout and I have to put "sleep" to my laptop. After the power got back, the hard drive suddenly gone and when I check the list of drives under "Disk Management", it showed up as "Disk 1 - Unallocated".

(I've attached screenshots here for your viewing)

My external hard drive is WD My Passport 1TB. It contains a lot of valuable data I cannot afford to lose. I really hope there's a way to fix this, and once I get back all of those precious data I will buy another HD to transfer them ASAP because I cant let this happen to me again.

Your help is so, very much appreciated.
Any questions regarding my problem, let me know. I'll provide all of the details you guys need.

NOTE
1) I've tried TestDisk but on the "Analyse" process, it says "read error"
2) I've changed cable, but the situation remains the same.
3) I've tried Recuva, but it doesnt recognize my external drive.

A:WD EXTERNAL HARD DISK 1TB suddenly "unallocated" and "not initialized"

Hi!

First don't mess up with the WD drive settings.. download partition wizard 7 (its free)..then .. open it ..click wizard(menu) .. select partition recovery wizard.. and it will find the partitions on it i think.. that way you can recover your partition that has been lost.

9 more replies
Answer Match 76.02%

Please go to the Control Panel to install and configure system components???

I have been running my system for some time.
Running XP Pro sp1
I have a Gigabyte GA-7N400 Pro 2
2 Gb Ram
AMD 2700
Running 8 hard drive
520W ATX power
All in wonder vid card

With no wornning that I saw. Suddenly I couldn?t open one of my drives. Instead I got ?Please go to the Control Panel to install and configure system components? I could not find anything refiring to anything I could install. I checked add hardware. I tried to reinstall the drivers for the hard drive. XP said all was ok. I was only able to access the drive by way of the administrative tools to open it. Not wanting to lose the files on the drive I added an other drive formatted it and transferred the files to the new drive. I del. the old volume and reformatted and retransferred the files back to the old drive. All was working fine for a bout 5 min. I had to reboot and now I couldn?t access the old drive again and to boot the new drive is no longer accessible with the same error message. Both drives are WD one is 120g with now 91g of files the other is a 250 with 2 equally divide drives. One has the 91g and other has 40g. The other drive on the 2 drive disk seems ok. Go figure !! Both disks are less then a year old. I know they could go in the first week. I doubt in this way?? I have been working on this PC most of the day and I?m getting ready to sharpen the ax. It is now 1am and I am going to bed and get a new star... Read more

A:Unaccessible Hard Drive

This happens if there is a file named Autorun.inf in the drive's root directory. Right-click the drive and choose "open", look for this file Autorun.inf and delete it. Restart Windows.

If the Autorun.inf line reads the following, the first error message is displayed:

[autorun]
open=Setup.exe

C:\Windows\System32\Setup.exe is launched actually

If the Autorun.inf line reads the following, the second error message is displayed:

[autorun]
open=Filename.exe

(where the filename.exe file is missing)

The file Autorun.inf is not intended to be on the hard drive root folder. They are used in CD-ROMs (to launch CD programs automatically).

5 more replies
Answer Match 75.6%

Hello

Just a quick post about my fix to this issue. After getting my PC rebuilt by a colleague I got this issue. I noticed that he had mapped storage volumes to G & H which are usually used when I plugin USB devices. So my fix was:

1) deactivate these storage volumes
2) shut down (overnight as it happens).

I did also have a quick poke at the hard drives but didn't change the configuration.

I appreciate this error is generic but thought I'd post as it may help someone else with this VAGUE PIE-IN-THE-SKY ERROR MESSAGE.

Am Newbie so please be kind.

A:USB external hard drive comes up as unknown device

I'm not sure what you mean by Deactivate a storage volume?
All you needed to do was go to Start/Run and type diskmgmt.msc and press enter. In the Disk Management window, Right click the drive and choose Change Drive Letter or Paths, choose a different drive letter that is not being usd.

2 more replies
Answer Match 75.6%

Hi there
I have connected my USB external hard drive to my machine and i get an error message that the device is malfunctioning. I have installed SP2. And run Virus programs but to no avail! The Hard drive does work on other Machines so its deffinately not the hard drive. The External drive has also been set to slave. Please help!

A:USB external hard drive comes up as unknown device

Howdy markhimself.. Try setting the External to master.. When you open your device manager are there any yellow question marks besides the Hard drive?

Also right click ym computer..Click manage..Then disk management..Does the HD show in there/

16 more replies
Answer Match 74.76%

Hello,
This is my problem... I had to reinstall windows and all is going well so far (just very tedious), but after plugging in my external hard drives one of them has folders that I believe are from Microsoft Update installations (which included a couple of device drivers) or possibly from HP device updates... (they look like this L:\7f6b418af72e04b214924794b837d42e). I'm guessing these folders should be appearing somewhere on the C drive similarly to the M$ update logs within the Windows folder. Or maybe they should just be disappearing after the update is installed. I'm not worried about these and feel comfortable deleting them, but I'd like to just not have it happen. I think this has happened to me before, but it was a long time ago and I cannot remember the solution.

I'd appreciate any ideas as to how to have these files route to the correct destination.

Thanks much in advance,
Sbergstc
 

A:Unknown folders appearing on External Hard Drive

9 more replies
Answer Match 74.76%

I have discovered that my external hard drive is showing "unknown file system" hence why it will not show anywhere on the computer for instance under disk management or my computer, is there any way to get around this? like can a file system be recovered?

A:Unknown file system on external hard drive

Is this the same Iomega drive you had problems with before?and did you follow the advice of reformatting it on a different machine before trying to use it again?

9 more replies
Answer Match 74.76%

I have a LaCie external hard drive which works fine on other pc's running Windows 7 Ultimate, but on this one it is an "unknown device". I have tried it in different ports but with the same result. I've checked with Windows Compatability and the exact model is listed there as being compatible. I've been to the manufacturer's website but there are no drivers available.
I have the same problem with any USB device I plug into any port. I have tried a complete Windows re-install from a different CD but it made no difference.
The only USB devices that work are the keyboard and mouse.
I have given the LaCie HD as an example because I am hoping that if I can get a specific device to work, I may be able to solve the problem with others.
I've done the upper and lower filter removal thing in Regedit, and have uninstalled and reinstalled the USB drivers numerous times but nothing works. I've also updated the BIOS.
Any ideas please?

A:External hard drive found as unknown device

NOT a pro ! but i think after what u have done the only thing faulty would be your ports <<<<

I had the same problem with my pc and after a hell lot of time waste i came to know that my ports are out ......

Am not sure whats the case with yours ........

5 more replies
Answer Match 74.76%

I have a Hitachi external usb Hard drive model H2160U This drive will recognize on xp. I have used it once on a vista machine and have files on the drive from said vista machine. However, now when i plug it in to either a vista machine or windows 7 machine it comes up as unknow device and not supported drivers. I dont have the drivers for the HDD any more. I have tried to find them online but can not. Is there anything that I can do to make this drive work?? I have tried to delete the USB unknown device in device manager and reconnect but still get the same error. Any tips would be helpful. Thanks
 

More replies
Answer Match 74.76%

hi my friend asked me to have a look at a there external hard drive after she split coke on it, and it stop working, the power is still getting to it the hard drive is still spining but the driver appears to be missing.

there is no vissable water marks (no sign of damage within the casing) (also there is no arking, burn marks)

there is power to the board and driver (light on the front and the driver spinning)

mine and there laptop both recognise that there is something there (as a 'unknown device') but it doesn't recognise it as a storage device.

when it did work it installed drivers from the windows drivers. i manually tryed choosing these drivers without success. it came back error code 10.

so i am unsure what the problem to be except the driver is missing,

much abilaged if anyone can help

just to in form i am running on vista
 

A:Toshiba external hard drive unknown device

I think it likely that the usb interface in your external enclosure may be damaged.
The drive may still be undamaged, and transferring it to a new enclosure may be your best best.
Such enclosures are relatively cheap and easily available.
I would not suggest continuing to use the existing enclosure.
Depending on the damage done to the usb interface, that damaged device could cause damage to the usb port of your computer.
Hope this helps.
 

4 more replies
Answer Match 74.76%

Recnetly I noticed I had a 4th hard disk drive instead of 3.
The strange thing is that I can't remember adding one..
I just got my 2 internal hard disk drives and 1 external hard disk. But now it shows 4.
Also, when I try to open this 4th hard disk it gives an acces denied error message.
When i look at it's properties it shows this:
http://i48.photobucket.com/albums/f2...g?t=1266766366

Also, I'm unaible to scan the hard disk. For my other hard disks, when I right click, I got the option to scan for virus. This option isn't in the list when I right click this new station.
Here are the menu list by right clicking on the HDD's.
http://i48.photobucket.com/albums/f2...g?t=1266766998
http://i48.photobucket.com/albums/f2...g?t=1266766998


Where does this hard disk come from?
Is it a virus because of a virus?
Why can't I access it?
Is it because of a program I installed?
Do I have to remove it and how?
Please help.

A:Unknown new hard disk drive.

Do you have a media player plugged in by any chance? (iPod, Zen, Zune).

That would also show up as a removable drive, BUT, if it was a media player, you would be able to access it.
Mine has done that with my camera also. it would show 2 separate drives....one that I can't do anything with, and the other which is where the pictures are stored. If I remember, they are called "removable drive" and "fixed drive.

I guess my first guess would be an external media player. If you have one plugged in, I'd unplug it from the computer and see if that other drive disappears.

15 more replies
Answer Match 74.34%

Can you help me? I got the same problem, sometimes my external driver say it was online, not initialized and some times it RAW, i was watching a movie but i kicked my external driver so it was forced to unplug, since then when i want to plug in it again the driver can't show up
Well this is my friend external driver and inside it my friend have 300gb files please help me

Sorry for my bad english

A:external drive say it was online, not initialized, and sometimes RAW

Hi andremarb,

Welcome to SevenForums.

From the description of your problem, I would think that the cable could have got damaged due the unceremonious kick that the HDD received. So as a first step use a new cable and check how your external drive behaves.

If the problem persists, please start a new thread explaining your problem in detail. Furnish full details of your external drive make/manufacturer/ Model /Capacity along with a full screenshot of how the drive appears in Windows Disk Management. Please adhere to the guidelines here Disk Management - Post a Screen Capture Image

In the new thread, even if it is not me - so unreliable these days , some one else can address your concern. So move on with the new thread.

EDIT: Just noted that your post has been moved on to a new thread. But this post still holds - more details and screenshot after changing to a new cable.

1 more replies
Answer Match 74.34%

Gday

I have emailed Paragon and am awaiting there reply, but you guys seem to know a lot more and try and solve the problem

Up to this point I have used either Acronis or Paragon for my backups, I prefer Paragon over Acronis, mainly because the restore by Paragon is far quicker.

I have both bootable CD's, but in this instance I would like to concentrate on Paragon.

I downloaded Paragon's Advanced Recovery CD. 2009 Build 6730. Put it in my rom and booted ....... looked at a black screen for 10 minutes. Removed it and rebooted, it got stuck at the loading of Vista, then I got another black screen no hard drive movement.

Rebooted again, this time with the regular Paragon bootable CD. It booted into the recovery console.

Now this is where things go from bad to worse. I tried finding my OS, after a lengthy period I received an error disk 2 i/o fault!!! ....... no operating system found.

Now disk 2 is my external hard drive where my backups are kept.

So I rebooted with the CD in, went into the recovery console and clicked on "safe restore", after playing the waiting game I get a message disk 2 i/o fault!!!.

Took out the Paragon CD, put in the Vista one, tried a repair, but there was no OS to repair .

So I installed Vista, and because I didn't want to have to reinstall all of my programs again (yer lazy I know, but that's what backup's are for).

Checked with the fresh install, that my two external hard drives, had there drivers and were present. They were ... Read more

A:Paragon Hard Disk Manager Suite & USB External Hard Drive

Anyone?

3 more replies
Answer Match 74.34%

hi there..

my name is Anis...i just bought external hard drive 500gb...but after I formatted it..it's just about 400++ gb can be used..i would like to know..how to use the extra/reserve space for my ext hard disk?by any means, i want to fully use my 500gb space for the external...please help me...thank you...
 

A:How to fully use the extra hard disk space for external hard drive?

It should have about 465GB, what are you seeing?

You will not have 500GB due to the conversion between binary and decimal for reporting sizes.
 

1 more replies
Answer Match 73.92%

[Seriously need help] External hard disk causes hard drive failures & OS crashes
The thread is rather long. Only read what you think important. Skip the rest!

We have a serious but mysterious problem. We have spent already one week but drawing a blank.
Two hard drives have been crashed and failed (unreadable). One computer has hung a few times unexpectedly and had one weird restart (no memory dump produced).
I suspect all the recent problems have to do with the new USB external hard disk (Buffalo MiniStation Lite: HD-PE250U2).

**********
Formatting USB external hard disk
**********
Originally I would like to use the program given by Buffalo to format the external drive once but we failed. We simply used Windows to reformat the drive into NTFS. I did not use the TurboSpeed advertised by Buffalo, or run its free program.

**********
Case A: Multi-transfer causes system crashes?
**********
The first time we met the problem.
We were trying to help a friend to backup data on an old drive, about a few years old. We plugged in the Buffalo USB portable hard drive and transferred a whole lot of files to the drive. Several cop/cut-and-paste operations were active at that time. The whole system completely froze up. It doesn't respond at all. Only a hard restart could help.
Restarted. Tranferred again. Several cop/cut-and-paste operations were active.
Hard drive crashed - the beginning of the nightmare!
Windows restarted. Chkdsk was running. Saw many lines of messages with:
&... Read more

A:[Seriously need help] External hard disk causes hard drive failures & OS crashes

7 more replies
Answer Match 73.08%

I have a Samsung s2 1tb external hard drive.

Today when I hooked it up to my laptop it would not load. It will shows local F drive when it usually will say samsung Drive.

A pop up box will then appear stating "you need to format drive"

I know if I reformat it I will lose all my data which I will not do.

When I look in device manager it states that the external hard drive is installed.

I attempted to go through start menu and type cmd then F: and it states "The volume does not recognize this system file. Please make sure all required system drivers are loaded and the volume is not corrupted."

PLEASE HELP I DONT WANT TO LOSE ALL MY FILES

A:Samsung s2 external hard drive not loading showing local disk F drive

With the external drive connected, Go to Disk Management (Start > type: "computer" > click on Computer Management > click on Disk Management)

Determine which disk is the external drive.
If the external drive shows here as a healthy volume, Right click on the large box to the right of the "Disk 1" / "Disk 2" lable and choose: Change Drive Letter and Path.

If there is nothing but a grey box or "Unallocated Space" next to the disk number then Right click on the disk number (the box) and choose: Change Drive Letter and Path.

Change the drive letter to anything else > OK.

If you can't do any of the above post back. If you can post a screen shot of the Disk Management window that can help.
Do not initialize the disk or format it or you will lose your data.

9 more replies
Answer Match 72.66%

Hi. My external hard-drive stopped working yesterday. This is what's happening:

I plug it in as usual, then it says "You need to format the disk in drive F: before you can use it. Do you want to format it?".
I'm thinking it's more than likely an issue of having pulled out the usb cable without clicking 'safely remove'.

Yesterday I actually got it working again briefly by typing "chkdsk F: /R" into command prompt. Now when I do that it doesn't work, it says "The type of the file system is NTFS. Unable to determine volume version and state. CHKDSK aborted." And when I double click on F: drive in my computer it says "F:\ is not accessible. The file or directory is corrupted or unreadable".

Are there any other options besides using some sort of data recovery tool (I'd rather not do this just because it takes a long time)?
 

A:Solved: External hard-drive:...format the disk in drive F: before you can use it.

11 more replies
Answer Match 72.24%

I currently have two external hard disk drives I am having major problems with. One is a SeaGate Free Agent and the other a Hitachi which seems actually to be a Western Digital internally.

Both of them have recently stopped working. When I say stopped working I plug them into the USB port and both of them spin and light up but they continue to spin and never mount or connect properly. I can see the Hitachi is making some connection when I look in syslog but I don't know what to make of it.

I have attached segments of the syslog where the Hitachi was plugged in and then removed. However nothing to report from the syslog when the SeaGate was plugged in or removed.

The Hitachi was plugged in at about 11:03:15secs and unplugged at 11:06:15secs. I plugged it in again at 11:07:05secs and unplugged it again at 11:10.

The SeaGate is under warranty but I am concerned about sending it in with the personal data on it. I have tried using SeaTools suggested by SeaGate but it does not recognise the drive. Are then any other ways I can retrieve the info of this drive or at worst ensure all data has been removed before sending back for a Warranty Return?

The Hitachi is not under Warranty but the supplier has offered to replace it. Again I would like to do everything possible to retrieve the data on it, or at worst ensure everything is deleted.

I have also tried plugging both of the drives into my girlfriend's OLD Sony Vaio but it did not recognise either of them as well.

We ... Read more

A:External USB Hard Disk Drive help

9 more replies
Answer Match 71.82%

I have a Seagate HDD of 500 GB. Recently it was on others pc and has got some viruses in it. I deleted some of them but its still in it, I'm also unable to open any folder. As I open a folder, it says "  Windows cannot find 'G:\.Trashes\b0d49151.pif' . Make sure you typed the name correctly, and then try again.  "I have Windows 8 64-bit OS. Can I get all my data back ?Please help.....Mod Edit: Moved to Virus, Trojan, Spyware, and Malware Removal Logs forum ~~ boopme

A:Virus in external hard disk drive

Hello and welcome to BleepingComputer! 
 
 
 
I am Elle and I will be helping you out with your problem. Firstly, you should know that we are working with specific tools which are used to identify the possible threats present on your system so I will analyze the results they produce. 
 
 
As a start we need to have some more up-to-date logs than the ones you have already provided. The current state of the files on your system might have changed so we need to get a clear look on that aspect. DO NOT bring any changes to the system except the ones I tell you to as that may produce more damage than helping us. 
 
If you will encounter a delay of over 2 days from me, please don't hesitate and private message me (link in the signature). 
Do not forget to check your topic periodically and subscribe to it so that you can receive notifications regarding my replies.
 
 
 
Please generate other DDS logs (download it from here if you haven't already) and post them in your next reply along with other changes that may have occured since you last posted.
 
 
 
Thank you very much for your patience. 
 
 
 
 
Regards,
 
Elle

3 more replies
Answer Match 71.82%

Hi.
Running on vista
I'm having problems using my external hard drive. When powering up it comes up with two windows suggesting I should run scan disk on the drive. Both the windows pop up at the same time, one behind the other. Running scan disk from either of these options fails to work properly (them seem to interfer with each other)
When booting the PC with the external HD already turned on a going to it in My Com. and using the tools there it gets about 1/2 way through and seems to stall.
I can't seem to run a disk scan on start up for the external drive, only for the hard wired in drive.
Having the disk on in the back ground does seem to interfer with windows operation even without me activly accessing the disk.
I'd rather not scrap the disk as it has a lot of music on which i don't fancy losing. With a bit of mucking about I could pull these files off onto the C: drive, but the external drive seems to stall when doing this 9making the operation less than practical)
Any ideas?

If someone would walk me through running a disk checker upon start up that would be fantablous. I'm running vista upgraded from XP (does this make any difference?)
 

A:Check Disk on External Hard Drive

Sounds like your drive has a bad sector or two. Let scandisk run; when it stalls it means it is hitting a bad sector, so it will go a lot slower, but when it finally finishes the bad sectors will be marked on the disk eliminating the stalling problem. Once this is complete, copy all of the data off of the drive so that you have a backup in case the drive fails later on down the road. Sometimes the drive will continue to run without any further issues for a long time, but if it starts getting bad sectors soon after, then it's probably on its way out.
 

20 more replies
Answer Match 71.82%

I bought a new external hard disk box, and put my old hard disk in it. The old hard disk was formatted with a c: and d: drive, but my soft and windows only recognizes the c: drive, the other d: drive is ignored. Weird. Any suggestions?
 

A:External hard disk, only c: drive recognized

Even disk management ( if you're using XP ) doesn't "see" it?
 

1 more replies
Answer Match 71.82%

i'm using windows xp home.

ihave a WD 1 terrabyte external usb hard drive.

i 'think' it needs checking.

i do the usual tools check now thingy and tick both boxes and agree to having it done on the next reboot.
i reboot and it does bot get checked.
is there a command to make it be checked then and there?
if so what do i type in the box?

windows calls it F:

best
pete
 

A:Disk checking a big external USB hard drive

Look closely at all the utilities on the Western Digital website... They can be helpful in testing and diagnoses.

Is the WD 1 TB a Green, Blue, or Black... The Green is known as having reliability problems and the Blue is not far behind.
 

30 more replies
Answer Match 71.82%

I have a Philips External Hard Disk Drive (SPD5420/SPD5430) that recently quit working. I had used it for the majority of the day then all of a sudden the little purple light turned off. I have plugged it into other drives and it still wont work. When plugged into my pc, it says "please insert disk into drive F." I've tried changing the path and that won't work either. Anyone know if i can possibly recover my files from this drive?
Thanks a bunch!
 

A:External Hard Disk Drive won't work

10 more replies
Answer Match 71.82%

Hi guys!! I have an external hard disk where I used to keep all my Important data for backup. A couple of times my PC restarted and now wen I plug the same drive again it does not show. It shows USB mass storage device icon in the taskbar but even wen I go to manage it says device not ready. Is it a prblm with my Hard disk or my PC? I tried opening the case of the HDD bt it ws all gud there!! And also wen I plug it in and Hold it in my hand I think the hard disk does not rotate as it shud. Plz help.
 

A:External USB hard disk drive not working!!

put the drive to your ear when you connect it/turn it on and post what you hear..
 

1 more replies
Answer Match 71.82%

I have a Metal Gear Box hard disk drive (about two years old) which I use with a Mac. I bumped it off the desk by accident and now when I attach it to the computer the external hard drive doesn't show up, the green light goes on but the hard drive doesn't appear on the screen. Help! What do I do?
 

More replies
Answer Match 71.82%

I've got a WD My Book external drive which has been working fine for about a year, but now the drive does not appear in Windows Explorer.

Sometimes the drive letter will appear, but for no more than a few seconds. When it does appear you can browse the folders/files on the drive very briefly, but then Windows Explorer completely closes (which seems very weird as even if you unplug a drive that you are browsing I would expect WinExplorer to stay open and just flick back to the C drive or to Control Panel).

Also, when the drive is plugged in, you get the popup near the system tray saying "this is a USB 2.0 and would run faster if plugged into a USB 2.0 port...." but it is plugged into a USB 2.0 port.

- The power light on the front flashes at a constant speed, rather than the sporadic flashing you normally get when the drive is active.
- I'm running Windows XP
- I've tried plugging the drive into a different machine and same thing happens
- I've tried using a different USB cable to connect it.

Basically I'm pretty sure the data is still on the drive but I need a way of retrieving it. Can anyone help, please?
 

A:External hard disk drive keeps disappearing

had similar problem, USB connection on the drive is loose. I pried the metal connections gently back upwards and then it worked,
 

2 more replies
Answer Match 71.82%

about an external hard disk drive. I don't know which ones are recommended. I have no specific requirements, but it has to have about 500gb - 750 gb of storage. I don't need to bring it everywhere. What brands are recommanded and which ones are NOT recommended? So it's important that it is reliable and won't easily break down. Also what other things should i consider, is there any software included that may be handy?
 

A:choosing an external hard disk drive

okeee. I had the same query, although I did not utilise Tech Guys, just my own gut feeling. I bought a unit from the local PC shop about 2 years ago.It is Packard Bell 150 gb.I would suggest just buy what takes your fancy.Since that time I have seen the prices drop to a reasonable level were I can now get 1 TB for 100, 500 gb for 50 750 gb 70 these are Freecom- LaCie-Buffalo-Seagate. These are available in the UK, the comapny Inuse has specials when these prices come down again.
 

2 more replies
Answer Match 71.82%

I just tried cleaning up my hard drive to conserve resources. I have a Seagate external drive to keep regular backups. Problem is that I've uninstalled several useless programs and emptied out most of the needless documents that wasted space. My HD is 111 GB. I've used almost 70 GB. Uninstalling programs didn't help much. Any suggestions?

A:External Hard Drive: Disk Cleanup

My suggestion would be to delete all your system restore points except the last one if you have regular backups on an external HDD.

2 more replies
Answer Match 70.98%

I recently upgraded to Win 10 from Win 7.  After using the computer for a few weeks, it refused to boot to WIndows.  I was able to start it and scanned it and found disc errors and opted to revert to Win 7.  In the process, something got fouled and now the computer won't boot.  I've tried to back up the computer via the setup (F8), but that failed multiple times.  So, i removed the hard drive and got it to run/work in an external hard drive case.  I've scanned it multiple times and it appears to be OK.   Is there a way to create recovery disks from the hard drive now that it's out of the laptop?  In other words, is there a utility on the hard drive that allows me to create the one-time revocy DVD to reset it to factory specs? The computer is just out of warranty, so that's not an option. Thanks in advance,Tim

A:Recovery disk creation from external hard drive

Hi Tim, Unfortunately, the recovery media creator utility would need to run within the OS on the drive that contains the recovery partition. A couple of options you could consider are. 1.  Order a replacement set of Recovery Media from HP on the link below. http://support.hp.com/us-en/document/bph07143?jumpid=hpr_r1002_usen_link1 2. If you don't mind staying with Windows 10 and as long as the previous installation of Windows 10 had activated Ok after the upgrade from 7, you can just create installation media on another PC and perform a clean installation as detailed in the guide on the following link.  Note: At the activation screen, select 'I don't have a Product key' - Windows will activate automatically once the installation has completed. http://www.howtogeek.com/224342/how-to-clean-install-windows-10/ Regards, DP-K

2 more replies
Answer Match 70.98%

What size External Hard Drive Disk Enclosure do I need?

My trusty old Dell Latitude d600 finally died on me - the monitor and screen needs replaced and it would be cheaper to buy a new laptop (apparently).

I want to take the HD out to retrieve my stuff - which size of portable External Hard Drive Disk Enclosure do I need? My new laptop is a Dell Inspiron 6000 and the HD looks the same as my old one.

Do I need a 2.5" enclosure (like this one);

http://www.ebay.co.uk/itm/USB2-0-2-...es_HardDriveEnclosures_RL&hash=item3a68627d72

or a 3.5" size like this?;

http://www.ebay.co.uk/itm/3-5-SATA-...K_Computing_HardDrives_RL&hash=item4cf7a8f766

hope u can help! thanks in advance
 

A:What size External Hard Drive Disk Enclosure do I need?

Laptop drives are 2.5".
 

2 more replies
Answer Match 70.98%

Ok... So here is my problem....model:hd2-su2
Lights were blinking for the last few days, it keeps restarting itself.... Now It is empty... and says it isn't even formated. Does this mean I have lost everything on it? If so what happened?
 

A:Rock Mobile Disk :EXternal Hard Drive

6 more replies
Answer Match 70.98%

Hello,

My internal laptop hard drive is a Hitach HTS725050A9A360 and it recently started to get bad sectors. Given that my laptop is under warranty, I decided to ship it to Sony to have it replaced. Problem is, they don't restore data and their service centre is in the US and I am in the UK. So I decided to clone this drive through Norton Ghost 15 to my external 500Gb ST350083 0AS iOmega External USB drive (succesfully) and boot from the external drive until Sony sends a replacement drive.

It can boot, but then restarts shortly after 'Starting Windows' shows up and won't even boot into Safe Mode... so we have two identical installs of W7 on different drives and one fails to boot. Any idea how to get this fixed?

Dmitry

A:External Hard Disk Drive won't boot after Ghosting

Hello fatcatsat. Welcome to the Forum.

I have never tried to do what you are doing, but my guess is that Windows is waking up expecting to be in one place and finds itself in another. While installing an OS on an external drive is common, cloning to an external is not the same thing.

You may be able to get it to boot by repairing the MBR on the external's install.
Startup Repair
Startup Repair - Run 3 Separate Times
System Repair Disc - Create

Worth a shot.

9 more replies
Answer Match 70.98%

My problem is that I have a computer with 1TB internal HDD (C drive) and various programs derive links from corresponding folders in that drive.
Now I wish to run the same programs from my another computer with 500GB HDD (C drive). To accommodate the data I have to attach an ext hard disk with 500 GB to supplemnt the capacity. But the ext hard disk takes the drive letter some E or F and the links for the programs do not work. Is there any way or trick to make the OS virtually recognise or deem the the ext hard disk as part of C drive? .
-Rama Reddy Karri
 

More replies
Answer Match 70.98%

My external hard drive seagate 1TB not showing in my computer and disk management. It happen after I install seagate dashboard. It showing in device manager under disk driver but I can't access this drive. I'm trying to get into BIOS while inserting the external drive but my computer stuck. When I pull out this external hard drive my computer can enter bios and boot up normally. Please help. I got very important data in my external hard drive. TQ very much
 

A:EXTERNAL HARD DRIVE NOT SHOWING IN DISK MANAGEMENT

I assume that if you start without the 1TB HD that everything works normally.

If this is true, when you connect the 1TB HD, do you get any indication that you have added new hardware? You should.

Is your connection to the 1TB HD via USB?

Never mind. One of your images shows that the Seagate is recognized. From that, I conclude that the USB interface is good
 

8 more replies
Answer Match 70.98%

My Cavalry USB external hardrive has been working fine. Now when I click on the drive to open it, the computer asks me to insert a disk in the drive.
I have Vista on the computer. I have plugged the external hard drive into another computer and it is installed, but when I try to use it, I am asked to install a disk. Hopefully there is answer.
 

A:usb external hard drive asks to insert a disk

11 more replies
Answer Match 70.98%

Please help -

I am experiencing trouble with trying to eject my external disk drive currently.

The situation is that I go to the task bar and go to eject it properly.

All my programs are currently closed - bar Internet Explorer - as I am typing this message.

I am just wondering how you can assess what is using the external hard drive - whether it may be a back up or virus scan.

I have just been turning my computer on then off as I do not wish to loose any information.

I have been told never to just pull the USB cord out

A:Safely removing USB External Hard Disk Drive

No , you shouldn't just pull the power. (Though I have before )

Since its a Seagate external, could that be its built in back up service working? The next time this occurs , right click on the taskbar and open Task Manager. See what applications and processes,if any, are open and running.

9 more replies
Answer Match 70.98%

I have a Dell Vostro laptop running Windows XP Home SP/3. I use it for business (ACT database, Oulook, Word, XL, web surfing) and only a little personal use. It is not loaded with junk and I intentionally keep it very lean/clean to minimize possibility of tech headaches that could get in the way of business. I backup data to a flash drive, but having had a hard drive crash several years ago know that data back-up is but a fraction of the issue. The time it takes to reload software is a pain. So, having read many posts here am preparing to buy an external hard drive for back up. I have also read about imaging and that I can recreate my environment via that path. All that sounds excellent, except I don't know how to create a boot disk, what drive to buy, what software to use for the imaging piece, and how to keep it all VERY simple. By the way, I boubght this laptop in Dec. 2007 and have only used 20GB of a 100GB hard drive. That may go up as we bought a new camera that has digital video and I will be using the hard drive to store those images as well. Suggestions, step-by-step stuff, warnings, etc. would all be a tremendous help.

THANKS!!!
 

A:External Hard Drive & Disk Imaging basics

I would recommend that you purchase "Acronis True Image Home 2010."
It is a very user friendly program that is pretty simple to use for someone not experienced in backup and imaging. You could create an image of your hard drive (cloning) on a regular basis (weekly etc), and use that image (ISO) to restore your hard drive back to the "original" condition in case of a disaster. You'll only need a second drive with ample space to save the image to.

It's also great for when you decide that you want to increase your disk space by purchasing a bigger hard drive.

If you need any assistance using it, I'm sure we could assist you here. Once you have made a couple of images of your hard drive, you will get the hang of it!

I have included a link to the PDF manual....best regards!

http://s4u.download.acronis.com/sl/...8TM(sEorhYygM6g/p/pdf/TrueImage10.0_ug.en.pdf
 

1 more replies
Answer Match 70.98%

Hey everyone,
I just purchased a new external hard drive for my laptop. I have a Sony vaio, and the hard drive I bought is a Micronet Platinum XL 500gb. I turned it on and it didn't show up in My computer so I went into the disk management and noticed it was not activated. I activated it and then still nothing.

That was obvious because the drive had not been formatted. So I clicked create new partition and started formatting it. All was fine, it was late so I went to bed, got up in the morning to see how it completed and it said that the format was NOT successful. Now it won't show up in My Computer, nor will it show up in Disk Management. Should I just create a WIN98 bootdisk and format it from DOS, or is there something else I can do?

THANKS!
 

A:External hard drive not showing up in Disk Management

If it won't show up, I don't see how you can format it in DOS.

Anyway, check out Device Manager and tell us more.

Other suggestions:

1. Test your drive on another pc
2. Check your bios settings


good luck
 

13 more replies
Answer Match 70.98%

I have a Simple Tech Pininfarina 320 GB external hard drive that is no longer recognized by two different PCs, even under disk management. When plugged into the USB, the PCs do try to install the driver, but fails. It is recognized under Devices and Printers as Unspecified and with the information Model-Simple Drive, Category - Unknown, and Status-Software is installing for this drive. The troubleshooter searches for a driver, but does not find one. Basically I get the information that "There is a problem wiht the driver for USB Mass Storage Device. Reinstalling the driver might fix this problem." But I cannot find a driver for this hard drive.

Can anyone steer me in the right direction?

Thanks in advance!
 

A:External hard drive not recognized in Disk Management

The system is telling you that there is a problem with a USB driver, check in the Device Manager for any yellow warnings. Under Universal Serial Bus Controllers you will see a driver for USB Mass Storage Devices, right click and uninstall it then reboot, Windows should reinstall it, or go to the motherboard's manufacturer's site and download and install the latest chipset drivers..

There are two other possibilities, the hard drive has failed or the circuitry in the enclosure has develpoed a fault.

Remove the hard drive from the enclosure and (if you have access to one) hook it up to the internal connections of a dektop PC. Or, purchase a USB Hard Drive Adapter (about ?10) from a computer store or eBay and then plug it into the USB connection on any computer and see if you can then access the drive.
 

1 more replies