Tech Problem Aggregator

Canon S520 printer driver

Q: Canon S520 printer driver

Hello,

I'm new in this forum and like to ask, if someone have a solution for my driver problem.
I've got an old Canon S520 printer and i am not able to install any driver on my Windows 7 64bit.
I searched the inet for a solution, but can't find one.
And sorry, if my English isnt't that good.

Thanking you in advance.

A: Canon S520 printer driver

Support - Color Bubble Jet Printer - S520 - Canon USA Consumer Products

Use the Vista driver.

5 more replies
Answer Match 80.64%

Hi. I have a Canon S520 that is making funny noises. It is sounding like something may be grinding. Does anyone have any suggestions?

Brennan
 

More replies
Answer Match 80.64%

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 3828 Mb
Graphics Card: Intel(R) Graphics Media Accelerator HD, 1722 Mb
Hard Drives: C: Total - 463525 MB, Free - 352294 MB;
Motherboard: Acer , JV71-CP , Not Applicable, 016AZXMBQTF004F5
Antivirus: Microsoft Security Essentials, Updated and Enable

Re: Canon printer S520. At one time (6 months ago) this printer worked with my my laptop. Later I installed a newer printer-scanner, but at this time newer one is not available to me. Now I'm trying to install the S520 again. In Control Panel it shows S520 has been added; the printer is on, but it won't print -- not even a test page. I get error messages such as "error processing command" or "no printer can be found". I'm on my third day trying to get this thing to print. Can you help, please?
 

A:Canon S520 currently won't print with Windows 7.

Have you followed the installation process as outlined by Canon? Are you using the Canon software CD? You often have to do the steps in the EXACT order they noted.

Uninstall all Canon software/drivers listed in Add and Remove programs, reboot, and start over.
 

2 more replies
Answer Match 79.8%

alright so I have a canon s520 and it was printing black until it ran out of ink , now i've changed the cartridge with a (BCI-3e) which on the box says it fits... but now it wont print black at all and ive done everything tried all the deepcleans and cleans and changing the setings to grayscale or photopaper if restarter the printer and the computer ive waisted about 5 pages now trying to print and there just is absolutly no black even though when I take the cartridge out where the ink comes out there seems to be lots of ink so its not clogged. Im about to kill some one i need this to work ive got contracts to print. and the thing is when i use color it makes all the noises and takes the time and does print the colore but with the black its like forget it im not even going to try and it just passes the paper through
 

More replies
Answer Match 78.96%

My Canon S520 started acting up by refusing to print black, even as it printed color with no problem. I changed the black tank, even though it was still half full, and eventually got black to print. After that (and only after that) color would not print either. The color tanks are full according to the monitor - and according to visual inspection. I've done every cleaning task available on the printer and followd up with my onw housecleaning, but still no joy.
My compter is in a room that frequently experiences temps below 60 degreees F. Could this cause a print cartridge problem? I can now print black and white docs as long as I specify 'greyscale' in the print options, but the color cartridges may as well not be there at all.
I'm hoping there's some funky software solution to my problem, but it may be hardware-related.

Any thoughts?
 

A:Canon S520 won't print color (Ink tanks full)

you may find some help here.

http://alpha03.c-wss.com/inc/ApplServlet?SV=WWUCA900

or here.

http://consumer.usa.canon.com/ir/co...Act&keyword=Canon+S520&Submit.x=30&Submit.y=9

they are both sites that i found at canon.com
 

1 more replies
Answer Match 72.66%

Canon do not support their BJ30 printer on a Windows 7 64 bit OS, and do not supply drivers. Does anyone know how I can use this printer on this OS, by perhaps using similar drivers etc? Thanks.
 

A:Printer Driver needed for Canon BJ30 printer on a Windows 7 64bit OS

on another forum, someone has managed to use the BJC-85 printer drivers to work with windows 7 - doesn't
say if 32 or 64bit windows 7 though

also have read here
http://forums.techguy.org/windows-7/990380-windows-7-64-bit-bj.html
 

1 more replies
Answer Match 70.56%

Hello))

I need help..please ))
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..

advice please..??

A:Window 7 64 bit cannot install driver sotware(canon printer driver)

Hi did you try a system restore to a point when it did work.

2 more replies
Answer Match 68.88%

I have a Canon BJC 4400 bubble jet printer that was given to me. I downloaded a driver for it (version 3.97) but when I try to install the driver a window comes up entitled "Extraction Progress" and extraction completes and then a window comes up saying "Canon Information", "all items were successfully extracted." I click OK and the next window that comes up is entitled "Readme-Notepad" in which information about things such as installation but when I close that window nothing else happens, it goes back to my desktop. I'm using Windows Me. I downloaded a driver for the same printer for my laptop which has Windows XP and it installs without any problem. All steps for adding a printer were followed. Version3.97 is for Windows 3.1, 95, 98, and Me. Any help would be appreciated.
 

A:canon bjc printer driver

is it just extracted into a temp file and then waiting for you to install
post the link to the driver page and I will have a look
 

1 more replies
Answer Match 68.04%

I just upgraded my home network to a wireless system. I'm running XP Pro on the computer hardwired to the Canon Multipass F50. My laptop is running XP Home and networked via wireless. All aspects of the network operate perfectly, file sharing, internet access, etc. The add printer function allows me to find the canon over the network, I have the driver installed (because I've been using the printer in a networked (shared) mode prior to going with the wireless router. Now when I attempt to print I get an error message that states: "Failed to open printer" Canon's website simply states that there are no drivers for XP to allow for sharing this printer.

Wonderful!! Anyone have a workaround? It used to share until I went wireless.
Dan.
 

A:XP printer driver for canon multipass f50

It almost sounds like there's a permission problem with using the printer with the laptop. Try going to the printer properties on the machine that the printer's connected to. Go to the Security tab and make sure that your laptop login computer name is there and all of the permissions in the ACL list are checked. You could also try going to Network Neighborhood, go to the computer that has the printer connected and try to connect to the printer through there.
 

1 more replies
Answer Match 68.04%

I bought this printer for a buck at a garage sale. They claimed it worked, but had no ink. I paid around twelve dollars for the ink cartridges on ebay, but forgot to check first to see if Canon had a driver for xp. They don't. However, when I go to microsoft's printer support page, I find that printer listed as one that there are drivers for in xp. http://support.microsoft.com/?kbid=293360

The question is--should I assume Microsoft is correct, or assume that my printer won't work and just get rid of it?

Shane
 

A:Question on driver for Canon printer (BJC-620)

I would go with the Win98 drivers they have listed on Canon's website. If microsoft has drivers for XP, try them first. The worst that can happen is that it won't work.
 

2 more replies
Answer Match 68.04%

Recently purchased a new laptop. During installation of above printer I received a message that I should contact Microsoft for a new scanner driver for the printer. Have looked everywhere on Microsoft website without any luck in finding a driver for Windows Vista Home Basic operating system.

Can you help?

Thanks
Judy
 

A:Canon Pixma MP 150 Printer Driver

Here is the correct web page for printer driver download
http://software.canon-europe.com/products/0010247.asp

If you have any problems with regards to conflicts etc just come back to this same thread and most folk will be able to assist further.
 

1 more replies
Answer Match 68.04%

Is there any way to install printer driver (i have canon mp250 and i have its cd driver) without having the printer around?

A:Canon printer driver installation

Hi,

This tutorial might help: http://www.ehow.com/how_5925020_install-printer-driver-printer-connected.html

4 more replies
Answer Match 68.04%

my printer driver has somewhta been deleted of my computer and i need another one. Plz someone tell me where i can downloads a working windows xp driver for canon 5100 series printer.

thanks
 

A:BJC canon 5100 printer driver

7 more replies
Answer Match 68.04%

I have a Canon i9100 printer which worked great through XP, Vista and Win 7....Canon provided updated drivers.. However, for 8.1, Canon does not provide a driver for this printer. Is there another source which makes a generic driver for this printer so it does not become obsolete?
 

A:Solved: Canon Printer Driver For 8.1

The below image shows the list of compatible Windows versions for the Canon i9100 printer.

Unless Windows 8.1 provides a built-in generic driver for it, you're probably out of luck.
 

1 more replies
Answer Match 68.04%

Hi all, I'm currently having the Canon ip1600 printer and is unable to detect the printer (using Windows xp os). I manged to find a driver on Canon website, but when it comes to the installation part where they state that I'm supposed to plug in my printer and on it so that It can detect the port, it doesn't and it just stuck at the screen. I tired restarting com, offing and on the printer again, but everything won't works. Any help will be greatly appreciated. Thanks!
 

A:Canon Ip1600 Printer Driver

You appear to have a Canon PIXMA iP1600 printer.

Here is the Email support site for it.

Here is the phone support site for it.

-------------------------------------------------------
 

1 more replies
Answer Match 67.2%

I have a Canon MP190 printer. I was having issues with weird messages every time I tried to print something. I figured I may need a driver update. So I went to Canon's site and downloaded the latest driver for my printer. I deleted the prior driver per instructions. The current driver just won't install. I followed the directions, but it fails to either find or install the updated driver.

I get a pop-up telling me Windows is searching Windows update for the driver. Problem here is the driver I downloaded from Canon has nothing to do with Windows update. I have Windows update shut off. So it is looking for the driver in the wrong place.

I tried to manually picking the driver out of various places on my computer, but I don't see it?
When I type MP190 in the start search box I find/see the downloaded driver location. If I double-click it-it unzips the WinZip Self-Extractor download. Then I get a welcome to the MP drivers setup program, I disconnect the printer cable from my laptop, and exited all running programs as asked.

Next I choose my place of residence--USA. Click next, accept license agreement, installs drivers. Click complete, confirm printer cable is plugged into computer, turn on printer. I get a pop-up telling me Windows needs to install driver software for your MP190 printer. Then I click "Locate and install driver software (recommended)" It starts to install and the driver icon spins like it is installing, but then fails to install.

Question is how... Read more

A:Canon MP190 printer driver won't install?

Why do you have Windows Update turned off? It may be that the driver requires updated files to install.

29 more replies
Answer Match 67.2%

W8 Release Preview 64 bit found my USB connected Canon Pixma iP5000 printer, but didn't install a driver. WU says there is an update available, but that will not install. Error is WindowsUpdate_80070BC8, which doesn't help much. I haven't been able to find a 64 bit driver on any of the Canon sites, but I have found an XP 64 driver, on another site.

Checking properties for this printer in Devices & Printers throws up the following event:?
Driver Management concluded the process to install driver prnca00m.inf_amd64_26559657092dd606\prnca00m.inf for Device Instance ID USBPRINT\CANONIP5000\7&8F48641&3&USB005 with the following status: 0xBC8.

This status code is listed as ERROR_CORE_DRIVER_PACKAGE_NOT_FOUND

Attempting to update the driver from the printer properties finds a couple of drivers, but they also fail to find a core driver package. Add printer wizard finds a compatible driver on my machine, but that also fails for the same reason.

This printer is installed OK on my W7 installation on the same machine.

The 64 bit XP driver installed OK on this W8 RP installation, and printed a file OK, but attempting to upgrade results in the same error. After installing this XP driver, WU reported that the update installed, but Update History shows 'Failed'. Now WU isn't offering the update.

TIA for any help.

A:Driver for Canon Pixma iP5000 printer

Does anyone know where I can get a W8 32bit driver for my Canon Pixma iP5000 printer? Canon just wash their hands of any responsibility.

2 more replies
Answer Match 67.2%

I have an older Canon imageclass d761 printer.

There are no 'official' x64 bit drivers on the Canon page.

Is there any way to use this printer with Win7x64?

A generic printer driver, or another model that is close?

My other printer, a MX850, works fine (Canon had x64bit driver)..

A:Canon x64 Win7 printer driver for d761

If your computer supports virtualization, use Windows XP mode. Even though my machine runs Windows 7 64-bit, XP mode is a 32-bit "machine" which is compatible with the printer.

I called Canon and was told to Google it. Nice support!

Anyway, printing works fine. I haven't figured out scanning yet, but hopefully will soon...

Hope this helps!

4 more replies
Answer Match 67.2%

I have Windows Vista SP2 32bit. Bought a new printer on the weekend but haven't been able to download the scanner driver. The printer works fine except when I click on the scanner button from the Canon software it says something like "no scanner driver is installed for this software". I've talked to Canon but after 3-4 hours of trying, they say that it's the OS and not the CD software. Something to do with USB port conflict. Any help would be appreciated. Thanks Gord

A:Canon MP480 printer driver won't install

here is a couple of links for the driver and software.

https://www.microsoft.com/windows/co...=all&os=64-bit - try this one first

Canon PIXMA MP480 Printer Drivers v 1.00 - TechSpot Drivers

? Download Canon PIXMA MP480 Printer Drivers v 1.00

14 more replies
Answer Match 67.2%

I tried to install a used Canon BJC-6000 printer on a PC running XP Pro. Went to Canon's support site and downloaded the driver. Tried two different IEEE cables (Both Good), the
PC still does not recongize the Canon printer. Does anyone have a site that has a good
driver to correct the problem? The settings has defined the printer as: BJC-6000 BJRSTR

Thanks for your help in Advance.
 

A:Need correct driver for a Canon BJC-6000 printer on XP Pro

9 more replies
Answer Match 67.2%

I just purchased a new Vista Home version computer. I started downloading old software/updates/etc. I have a Canon imageClass D680 multifunction printer/copier [Canon PC1200 /iC d600/iR1200G] with the original CD but it is not compatible with Vista.

I went to CanonUSA website and downloaded their Vista version of the driver. NOTE: I have done this numerous times and saved it to several different locations [Program file folder in both Vista and one I created in my user "Program" folder] because Vista notified me that I did not have Administrator authorization - I got on line and learned how to disable the user limitation so I could have Administrator rights.

I have restarted my computer in both my personal user account and Administrator account over a dozen time in order to bring up the new hardware notification window and driver wizard. Since the cd version did not work, it prompts me to browse, I click on the corresponding folder, and then I get the same message EVERY time . . .

[paraphrased] "windows cannot locate the driver for the hardware, contact the manufacturer to get the driver."

You guys out there are more tech savvy then me - please help. I do not want to trash this printer/copier - it works great (it worked fine with my old XP machine just a week or two ago).

Is Vista that bad? (All my Canon printers and cameras have been great).
 

A:Vista does not recognize Canon printer driver

6 more replies
Answer Match 67.2%

I have an Asus printer with a Windows 7 upgrade and a Canon MF4140 printer. I am trying to upgrade the printer driver to a Win 7 version. I have dowloaded the new driver from Canon and upzipped it as requested. I have removed my original HP driver from the devices and printers area, and then ran the setup file from the new driver. My problem is that  a window pops up stating:"An older version of MF Drivers exists in this computer.Uninstall the older version of MF Drivers, and then try to install again"I cannot see any other printer drivers on my system, can any advise as to where thay might be and how I get rid of them?Thanks

More replies
Answer Match 67.2%

I have Canon S900 inkjet installed on an XP PC on my win 7 homegroup. Works fine from the XP PC. The Win 7 PC sees the S900 and asks for driver. Downloaded Canon aomwin110ea23us.exe which extracts something somewhere. Cannot locate ANY .inf file on the PC. Win 7 still wants the .inf file to install the printer. Know this is a bit 'unusual' but any help would be appreciated. Thanks, Joe

A:Canon S900 printer driver installation on Win 7

You should read this other thread I posted last week.

That other thread described my issues trying to get the x86 drivers for a Canon S800 installed as the second driver on an x64 Win7 machine. The S800 was USB-connected to the Win7 machine and was supported out-of-the-box by Win7. However the required x86 drivers were seemingly unavailable from Canon.

I was trying to add the x86 drivers as a second driver for the printer on x64 Win7 so that the x86 WinXP machine (which was also on the home LAN) could print on the S800 hosted by the x64 Win7 machine.

After quite a struggle, I solved the problem. It actually involved THREE separate driver(INF) files and folders. Two of them were on the Win7 installation DVDs, but the third one (which was the primary starting point) apparently didn't make it to Microsoft in time for the Win7 installation DVD production. so this crucial first of three drivers was only available from the Microsoft Updates Catalog site.

So the three needed x86 versions of the three x64 drivers that had been automatically installed in x64 Win7 were my target. Again, two of them were on the 32-bit x86 Win7 installation DVD (just as they were on the 64-bit x64 Win7 installation DVD). But again, the primary first driver was not. And that's what I got from the Microsoft Updates Catalog site.

I then used a program named WinMount to extract the two other x86 drivers from the 32-bit Win7 installation DVD which I had a copy of.
I suggest that you start by de... Read more

8 more replies
Answer Match 67.2%

Hello! I would like to know if Vista can maintain Canon Printer. During the installation the error massage was appeared. Canon cannot create an adequate driver for Vista. What should I do to run my printer or it is impossible?
Thank you in advance!!!

A:Vista driver for Canon printer is not created

whats the exact model of the printer ?

4 more replies
Answer Match 67.2%

Hi All
Does anyone know where I can get a driver for the above printer that works on Windows 7 or is there a driver from another printer that can be used?
Many thanks
djb

A:Driver needed for Canon LBP2900 printer

to get my lbp2900 printer working i used the following workaround
- Installed virtualbox (maybe this is also possible in virtualpc)
- started a virtual winxp image
- virtualbox has a remote usb-bridge to connect to usb-devices not recognised by the host-system, configure the bridge to the printer
- install lbp2900 driver

To print from office/photoshop without installing those in the virtual image, on the host system print to pdf (pdfcreator) and print the pdf in the virtual image.

however i still hope canon releases their x64 lbp2900 driver soon!

9 more replies
Answer Match 67.2%

I was working on getting the Canon ImageClass 4150 machine to work on a machine with Vista installed. I downloaded the new driver and upon trying to install the installer informed me that I needed to uninstall the previous instances of "MF Drivers" in order to reinstall.

I ran a utility included in the setup zip file that is supposed to remove previous Canon drivers in the 4100 series. I removed it from Add/Remove programs and also in the Device Manager. I've searched the computer (including hidden files, etc) and can't find any previous instances of the driver. Can't figure out what else I need to install.. Any help please?

A:Reinstalling printer driver for Canon ImageClass4150

http://support-au.canon.com.au/contents/AU/EN/8200334500.html

http://canoncanada.custhelp.com/app/answers/detail/a_id/4073/~/uninstalling-and-reinstalling-the-printer-driver

MF refers to the model group...ignore the fact that the second link refers to Win 7. Both links are provided as just info to consider.

Louis

2 more replies
Answer Match 67.2%

Hi all,

OK ... for a few days (maybe a week) now I have had trouble with my Canon MX870 Printer/Fax. I have been using it successfully for the past 16 months now, via USB connection, installed on both my Windows 7 laptop and my Windows XP PC (I just unplug it and plug it in to whichever computer I need to print from).

For some reason, it has decided not to recognise the drivers on my laptop. I have tried to uninstall and reinstall (no go). I also deleted every instance of MX870 from the registry that it would allow me to (some it wouldn't for some reason - no access - yes I am Administrator). Reinstall again ...still no go.

The Windows 7 Updates were failing to update the Fax component which I thought was the problem, then all of a sudden it was successful ... still no printer. Now, it is unsuccessful again.

But ... I don't use the Fax component ... never have ... with no problems for 16 months.

The reinstall from the CD is successful, but when I plug in the printer, it fails. "Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed.

CanonMX870 series ... Ready to use (with a green tick) ...
CanonMX870 series FAX ... Failed (with a red cross).

Oh, BTW, the scanner component works fine.

Also, each time I unplug then plugin the USB cable, it attempts to reinstall the device drivers, the printer successful, the fax failing. It never did this before when I was happil... Read more

A:Canon MX870 Printer - Driver Issues

Thats a long story. You might of already did this. Start and go to devices and printers. Make sure the printer has a check mark in it. That will make it your default printer. With the printer hooked up to your computer and powered up reboot your computer. Lets see if Windows 7 will pick it up or sometimes it will ask if you want to install the driver. Windows 7 comes with a lot of drivers built in.

7 more replies
Answer Match 67.2%

Win 7 doesn't support the Canon BJC-4000 ink jet printer. Any other drivers that will work? I love this printer!

Thanks!

A:BCJ - 4000 Canon printer driver needed

Hi,
Double check the # on it cause it's not in the directory. It must be different since it doesn't pull up on my website I am checking.

4 more replies
Answer Match 66.78%

Beat my head against the wall so decided to post because I finally have it working.
My setup:
Machine 1: Windows 7 64 bit
Machine 2: Windows Home Server WHS (or in your case any 32 bit Windows OS) with Canon Pixma MP780 printer

Problem:
Can't install 64 bit drivers on machine 2 (under additional drivers) such that machines on the network can connect to this shared printer.
Canon only provides 64 bit drivers for fax and scanner and not printer on their website because the assumption is that a native driver is built into Win7 (64bit), which it is. The problem is that canon on both machines refers to this printer as two different names in the .inf file.

On the 32 bit side, it's called: "Canon MP780 Series Printer"
On the 64 bit native driver (that windows provides), it's called: "Canon Inkjet MP780 Series"

So, when I tried to connect to the network'd printer, it tried to look for it locally, on windows update and times out and fails (looking for the wrong name and therefore a mismatch).

Btw, I tried creating a local port on the 64 bit machine and gave it a UNC path to my WHS which works but after a reboot it doesn't so that's not "non techie" friendly and a pain in the neck.

Here's what I did:
Look for the driver under c:\windows\system32\driverstore\filerepository\<for your printer>.

In my case, for the Pixma MP780, it was : prnca00l.inf_amd64_neutral_4049bfb7d4c077ab

In this folder, the file was: prnca001.inf (setup info... Read more

A:If Canon or printer manufacturer does not provide a 64bit driver

I can't sticky, but I can thank you on behalf of all that read and benefit from your thoughtfulness.

2 more replies
Answer Match 66.78%

Hello))
I need help..please )
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..
 
 
please help =)

A:win 7 x64 cannot insall driver software to my canon mx360 printer

Uninstall ALL software related to Canon, after deleting the printer.
 
Then reinstall everything related to printer anew, following Canon instructions for doing such.
 
Louis

2 more replies
Answer Match 66.78%

I bought a new laptop and it came with Windows 7 Premium. I have a Canon Pixma ip3000 printer. I have looked everywhere.
My printer is not listed. I tried the trick of choosing USB virtual port and then searching for the latest printers. It still wasn't there.

I have the install disk, does not work.

Help!!!

A:Can not find printer driver - Canon Pixma iP3000

  
Quote: Originally Posted by CoCoSD


I bought a new laptop and it came with Windows 7 Premium. I have a Canon Pixma ip3000 printer. I have looked everywhere.
My printer is not listed. I tried the trick of choosing USB virtual port and then searching for the latest printers. It still wasn't there.

I have the install disk, does not work.

Help!!!


Hello CoCoSD,

Did you try to download the driver from Canon website?
Photo Inkjet Printers - Photo Inkjet Printers - PIXMA Pro Professional Inkjet Printers - PIXMA Corporate and Graphic Arts Printers - Photo Fun Projects - Photo Printer - PIXMA iP3000 - Canon USA Consumer Products

Select your OS and it should work.

I have a Canon iP PIXMA 1500, and it works perfect with downloaded drivers.

Best regards,

zx81

9 more replies
Answer Match 65.94%

Just unzipped files from download I got from canon.com started installation, 8 mins left it froze. Wouldn't even bring up task manager or run screen with the windows button and "r". So I did all I could, I powered down. Waited a bit, back on, screen imminent hard drive failure bbck up files immediately press return to con tinge windows setup .put in password, screen print, save, skip Bach up directions, freezes at any attempt

More replies
Answer Match 65.94%

Can't someone help me find a Canon PIXMA ip5000 printer .INF file for Win7 Pro x64 ? The Canon website has an Add-on driver for the Canon PIXMA ip5000 printer, but indicates that Windows Update under Win7 Pro x64 has a driver for the Canon PIXMA ip5000 printer (which it does not). Windows Update has a driver in its list for the ip5300 but none for the ip5000. Help !

A:Can't find a driver for Canon PIXMA ip5000 printer for Win7 Pro x64

Why not try the Canon site?
Canon U.S.A. : Support & Drivers : PIXMA iP5000
However, the statement on that site





Quote:
Printer Driver Add-On Module Ver.1.10 (Windows 7/7 x64)
07/20/11 4.10 MB File Name: aomwin110ea23us.exe

This software is a module that expands the functionality of the printer driver for Canon Inkjet printers. Your printer must be installed via Microsoft Update before you download and use this module. By installing this software, you can use the printer...


seems to rely upon Windows Update having the drivers.
If you can't get them you might try changing the Operating System on the above link to Vista 64-bit. It's a considerably larger file and lo... Read more

1 more replies
Answer Match 65.94%

I'm trying to add a Canon imageCLASS MF7470 printer to my laptop. When I plug it into the USB, Windows 7 detects it, but as unspecified. It says no driver is installed. When I do a Windows update it comes up with other imageCLASS models but not the one I have. I've tried going thru these threads to locate my options but nothing works. When I go to add printer, properties is as far as I can go cause the only tabs I get there are general and hardware. This is a work printer for a jobsite, so of course the disk has been lost at some point, but I need this running ASAP.

A:Add a Canon printer with no driver and Windows update doesn't work

Here is the driver page for Canon, just specify your OS, download drivers, install and go at it could be that MS just doesn't provide them. However Canon does for both 32 and 64 bit.

Canon imageCLASS MF7470

1 more replies
Answer Match 65.1%

I was curious if I could install a x86 printer/scanner driver on a x64 system?

I had to install the x64 driver through Microsoft Update. When I installed the software that controls the scanner the software says no scanner detected.

The software works fine in XP and I still see driver support in x86 Vista/7.

Since I installed the printer driver through MS update there is no uninstaller. If I wanted to uninstall it, do I go to Device Manager and delete the printer driver from there? How likely would 32-bit drivers work a 64-bit system?

A:Canon MP730 Multi Function x86 x64 printer & scanner driver assistance

You can go to device manager>properties>driver tab>install driver to install it.

As far as using a 32bit driver on a 64bit system I'm pretty sure it won't work.

Have you tried using the Cannon driver installer?
They have a listing under multifunction for the Smartbase Mp730 if this is the one your referring to.

Then again it doesn't say what OS it is for.
My impression of the site is that it first has you install their down-loader which will scan your system and then provide the correct driver.

I would give this a try if you haven't already.
http://www.official-drivers.com/installer/?seed=canon&gclid=CN_3tf2q2KwCFUhjTAodO2DIqw
Fabe

3 more replies
Answer Match 65.1%

Last week I had to replace my old computer which used XP SP2. The new system uses Vista Home Premium and I'm unable to get my Canon MultiPass F60 printer to print. I've tried an Internet search for a driver and I've tried to add a printer through the Control Panel. My current printer isn't listed under the Canon products.

Can anyone direct me to a download that will resolve this issue or tell me which Canon product under Add a Printer will work for mine? Any help will be appreciated.

Gawain
 

A:Driver for Canon MPF60 Printer, WIndows Vista Home Premium

I've looked everywhere for you and can't find a trace of evidence that a Vista compatible driver exists for the MPF60.

Sorry
 

2 more replies
Answer Match 65.1%

Running Win 7 64 bit. Printer: Canon ImageRunner Pro 7110VP.

The most recent driver Canon offers for this printer is from 2005, and Win7 says it's incompatible when I chose the "have disk" option. Is there a way to install a printer as if 7 were running XP?

I have to install it over a network via TCP/IP if that matters.

Please help!

A:Installing older Canon printer, driver is incompatible - make it work?

Right mouse click on the driver and run in Compatibility Mode.

5 more replies
Answer Match 61.74%

I recently uninstalled and reinstalled the software (Multipass Manager 3.01) for my Canon C5500 printer; during the reinstall, I am receiving the following error "Failed to register mpservic.exe to windows NT as domain or service". Can anyone give me any insight on how to make the software register this executable to the service MPSERVICE? I tried to remove all entries for the Canon printer in the registry and reinstalled the software; but I am receiving this same error everytime and the software is uninstallled after the error. Please help!!
 

A:Reinstall of Canon Multipass 3.01 software for Canon C5500 printer

Two things to try: If you have anti-virus software, disable it, uninstall the cannon stuff. Reboot (be sure av is still disabled), and reinstall. Then reenable av, restart for good measure.

Another suggestion from Canon, though not apparently EXACTLY your issue:

http://www.expressresponse.com/cgi-...02877.2509.2&search_erproduct=MultiPASS+C5500

Also, see this document.. it most likely is not related, but..

http://www.expressresponse.com/cgi-...3490.14078.7&search_erproduct=MultiPASS+C5500
 

3 more replies
Answer Match 60.9%

I have a Canon i850 printer which I have immensely enjoyed using these past four+ years. For one thing, I've never had even one paper-jam during that time.

My understanding always has been that it is best to have separate components, so that's why I've always owned a dedicated printer. However, it appears that the present-day trend is more toward all-in-one units. Actually, I'm in the market only for a printer, but if the Canon MP600 all-in-one is technologically advanced far beyond my i850, then I would strongly considering buying one.

The MP600 has a scanner (which I don't need, although it would provide me with a back-up) and it has several modern features of convenience which my i850 doesn't have. What I would especially like to know is whether or not the MP600 produces appreciably better results with both text and photos than my i850. Also, would it be faster and cheaper in the long run than the MP600? While quality of results is more important than anything else, speed, economy, and convenience also enter into the equation.

(I was also considering the Canon PIXMA iP6700D photo printer, but from what I've read so far it appears that the MP600 all-in-one is more highly-regarded.)

I would appreciate hearing from anyone who has an opinon on this matter. Thank you very much.
 

A:Canon i850 printer vs. Canon Pixma MP600 All-in-One

9 more replies
Answer Match 55.86%

My trusty old Canon printer S400 finally has decided to act up and quit on me after several years. I am getting an Error 5700 when I attempt to print to it. I can not locate what this error means.

If someone knows, I'd appreciate it.
 

A:Canon printer error 5700 on S400 printer

I don`t know what the error means, but have you tried uninstalling then reinstalling the printer?

Check the cables for damage and connection.

If this doesn`t work then maybe a new printer is in order.

Regards Howard
 

15 more replies
Answer Match 55.86%

When I tried to install a new Canon Pixma ip6220D printer on my Sony Vaio Windows XP Media Edition w/ SP2 desktop I receive an error that the computer cannot detect the printer after I hook-up the USB cable to the computer from the printer. This is after a balloon dialog appears in the system tray noting that new hardware was found - the hardware being a Canon ip6220D. The Canon software notes that it could not detect the printer and that there was a printer driver failure. Eventually a Windows error box appears noting that an error occurred installing the new hardware.

I have the same problem with a printer that previously had no problems. That printer is a HP Photosmart 3210xi.

I ran malware check using Threat Fire 3 which didn't find anything.

I have tried different USB ports with no success. I have tried USB ports that other devices use with no success.

Any suggestions on how to attack this problem would be appreciated.
 

More replies
Answer Match 54.6%

I get a printer error that I have two of the same cartridge installed (which I don't). I did the maintenance cleaning. I was able to get it to print for awhile by opening and closing the lid, but now it is not printing. I use Canon cartridges, and several are new cartridges.
 

More replies
Answer Match 51.24%

I'm looking to see if there is a BIOS upgrade available for my Toshiba Satellite P25-S520 that would enable me to perform USB boots. I suspect that it's impossible but I'm holding out hope that some Linux aficionado has figured it out [my dream is to boot to Linux using my Seagate USB 2.0 Pocket Hard Drive hard drive!!!]

Thanks
 

A:Toshiba Satellite P25-S520 - USB Boot

the bios made by phoenix will not let you usb boot anything. I have a very similar model with same bios. Sorry.
 

1 more replies
Answer Match 51.24%

I regret posting a second time, but somehow a post intended for the OS group landed in Hardware, which caused my question to be closed.

With my Dell Dimension 4550 I tried to install my 3 year old Canon BJC 5100 but the CD fails installation as incompatible with XP. I went to the Canon site thinking I needed a new driver but could not find one for this model, so I wrote Canon and got a response that this model is not supported for XP.

Since I am unable to install from the CD, can anyone suggest a way to install my printer???
 

A:XP & Canon printer

Unless Canon updates the driver and software for the printer you will not be able to use it, unfortunately.
 

1 more replies
Answer Match 51.24%

Hi, I have a Dell Inspiron desktop that's 3 yrs old and my new canon printer is connected via USB cable. I just bought a Lenovo laptop to which I connected the printer via wi-fi. I've also downloaded Win 10 recently. My problem is I can't get my printer to work thru my desktop. I can print thru my laptop but not my desktop. Could the problem be that the printer is connected thru the USB cable for the desktop and the wi-fi for the laptop? Thx for the help
 

More replies
Answer Match 51.24%

My MX 870 printer is not printing. The item are backing up in the queue. (the WiFi light is on , if that means anything) I recently added a second computer, (lap-top), in a network.

HELP

A:Canon MX 870 Printer

Hello and Welcome to TSF!

I wonder if you have an Auto IP or DHCP setup for this printer. This need to be a Fixed IP, any wireless device with Auto IP assigned is not recommended.

See if the Printer IP matches with the wireless computers in your network, click on Start=> Printers and Faxes or you may also find this from Control Panel. Locate the Canon printer, right click on it, go to Properties, Port Tab and in here you shd be able to see the IP Address. From the Canon printer, look in the Menu Setting, under Network or TCP/IP setting to locate the IP Address, make sure it's on Static and the IP matches the IP in all computers in your network.

1 more replies
Answer Match 51.24%

Ive got a MP540 and for some reason when i print something it wants to print from the rear paper feed as opposed to the much easily accessible paper tray at the bottom of the unit. Is there anyway I can stop the printer from wanting to print via the rear paper feed

thanks
 

A:Canon MP 540 printer

Did it come with control software that allows you to configure the printer via the PC, through the properties of the printer?
 

3 more replies
Answer Match 51.24%

hi guys i am back now with a small thing
i have in my office a canon ir3035n and i inserted into my pc and i didn't need any drivers as it installed itself (without internet) but the thing is all the other computers in the office have a different driver.
what do i mean as when i go into printing preferences i have nearly nothing, but all the other computers have a full program (not a actual program) with options like which drawer to take the papers to where it should come out etc. so i was wandering where could i find it i made some searches tried to install some thing like canon ir3035/3045 PS3 but the problem with this one was that it didn't print!
so please if someone could help me to find the correct printing (if possible also the scanning) driver
i would really appreciate it
thanks

A:canon printer

Did you Install any of the Drivers from the Link below ? ...
http://software.canon-europe.com/products/0010415.asp

9 more replies
Answer Match 51.24%

I have a Canon BJC-6000 printer. It is beeping 8 times telling me that the waste tank is almost full! I have opened the machine and have found the waste tank. Now I need to clean or replace the 'tank' and reset(?) the beeper (counter?). Can anyone help me. (PS I am already in contact with Canon, don't refer me there.) Thanks, .....John
 

A:Canon Printer

Waste Error Reset:
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
7: Press Power to set data
 

2 more replies
Answer Match 51.24%

Is it possible to get longer use out of cartridges for the lowly BJC-2000SP (black and colour) and BJ-30(black). Mine run out almost straight away. I've tried what the manuals say about draft mode and speed settings.
 

A:canon printer

8 more replies
Answer Match 51.24%

If I receive a reply to this query that contains any "useful" info, I'll be pleasantly surprised. My OS is Windows 98. Several days ago I had installed a Canon BJC 620 printer. The appropriate driver was installed. I've been using it and it has been printing without any problems. Went to print tonight and it wouldn't print at all. Opened the Control Panel, went to printers, and the printer isn't there! The only icon in the box is the one that says "Add New Printer." Went to "Add New Hardware" to reinstall printer. My printer is not in the list provided. Am using a parallel port. Can anyone tell me, step by step, just how to install this printer? Does anyone know what in the world caused the printer to just disappear as if it had never been installed in the first place? Like I said, I really would appreciate any help anyone can provide, but I'm not holding my breath. Thanks.
 

A:Canon BJC 620 printer

Not exactly a positive attitude you have there. Have you checked the usual like the attachment of the printer cable and power plug? In Device Manager under ports is the LPT port listed as working?
 

1 more replies
Answer Match 51.24%

I have a i80 printer it says you can plug a mobile in to send pics to printer, is this correct, also where do I buy this from and also do I need the av/dc lead to go into the i80 printer.

Another I have a canon lide60 scanner, what do I install to make the pics come up on screen.

More replies
Answer Match 51.24%

A friend has a new 64 bit Win 7 computer and an "older" Canon BJC 250 printer that she wants to be able to use just as she did with XP. It connects with USB and Win 7 recognizes the connection but the printer does not show up anywhere, such as on Devices and Printers page. I have dowloaded the Canon driver but am stymied at that point. Suggestions and help appreciated.

A:Canon BJC printer and Win 7 64 bit

I've looked at Canon's driver page for the BJC-250 and unfortunately that model is not supported on windows 7, nor is it supported on Windows Vista. The last driver that Canon released for that model was for Windows XP in 2003 and that definitely won't work on Windows 7.

Canon have evidently decided that the BJC-250 is too old for them to spend money writing new drivers for it. This is not unusual as other device manufacturers have also done the same with some of their discontinued models.

So if, as you say, you've already downloaded a driver for it I'm puzzled as to where you got it from.

The bottom line is that you'll have to buy a new printer for Windows 7.

3 more replies
Answer Match 51.24%

i recently installed a new canon pixma mp130 all in one.since install my windows defrag. program will not work,aldo any third party defrag programs either.regseeker 1.45 will not load or loads very very slowly.worst of all i can only shut down computer via switch on box.system is pentium 4 3.4ghz ht.512 mb ddr ram and was working with zero faults till addition of printer software.i have reformatted and carried out total reinstallation but to no avail.any ideas please.

A:canon printer

If you let the auto install do the installation of the printer, that could be the problem. Canon has had some problems with the auto hardware install.

3 more replies
Answer Match 51.24%

I have a Canon MP 830 printer. It had been working fine, but one day the printer would not turn on. I checked the power cord and it works. Any ideas? Is there an internal fuse or breaker that could have tripped?
 

A:Canon MP 830 Printer

Moving this to hardware.
 

1 more replies
Answer Match 51.24%

Appreciate some assistance.

This is one question Canon will not like.

Have two printers, a Canon BJC 2000, and a Canon BJC 250.
Use bulk black ink to refill the Canon BJC 2000, and was wondering whether the same ink could be used to refill the BJC 250. Do printers normally use "specific" ink for their make and model, or would any black bubble-jet printer ink be OK?
 

A:Ink for Canon Printer

11 more replies
Answer Match 51.24%

Could someone please tell me how to invert print with a Canon IP 1800? I'm sure there has to be an option for it somewhere but for the life of me I can't find it.

Thanks for your help.
 

More replies
Answer Match 50.82%

Hiya, I wonder if anyone can help me, I have a BT multijet 3000 printer which worked fine on XP, but when upgraded to vista says unrecognised device, the driver isnt in vista, the cd which accompanied the printer doesnt work, and the company stopped support for the printer before vista came out, I wonder if anyone can help me to find the driver or tell me how to set up a generic printer so it can at least print documents, I tried the generic ones on vista xps and image one, but they didnt work, any way of how to set up the port manually, its USB, and there is no option for usb, just says lpt1 or com ports on the xps one
Help! Thanks

More replies
Answer Match 50.4%

I replaced the color cartridge. and it still says its empty.. I have looked every where to find out how to reset it. But cant find anything. I even checked canon web page. i can print. But it drives me nuts.. can some one please help me
 

A:Help with a canon mp280 printer

Two typical causes, the printer itself, or the Windows monitoring app.

Uninstall the software/drivers using Add and Remove programs, reboot, and reinstall.
 

3 more replies
Answer Match 50.4%

I have a Canon multipass c530 page scanner, fax machine and color ink jet printer. The printer will not complet the self startup test and gives me an error message of "put in cartridge" both the color and black cartrigdges are seated correctly and so is the print head. The page scanner and fax machine parts still work, I can send the incoming fax to the computer but I can't print anything. Can someone please help me.
Steve
 

A:I have a problem with a Canon printer

You'll hate me for this but you did peel off the little sticky tape bits from the printer cartridge heads - didn't you?
 

2 more replies
Answer Match 50.4%

Has anyone gotten the 64 bit version of Windows 7 to work with the Canon S9000 printer? There is a add-on driver for 64 bit, but it needs the "regular" driver to be loaded first and I cannot seem to get it to install - it dies at 60% every time.

A:Canon S9000 printer

Wow, I cannot believe no one whas tried using this printer yet. Its a very high end wide format printer - will do 13" X 19" photo prints. So I do not want to just get another printer. I really need to get it to work under Windows 7.

4 more replies
Answer Match 50.4%

2004 - bought new
2004 - 2005 used infrequently with excellent results - good quality pictures
2005 - packed in original packaging, including plastic bag, styrofoam cradle, Canon box
2005 - 2006 stored in garage
2006 - connected to same PC - will not work - repackaged as before
2007 - now - many attempts to make work, with same results. I have reinstalled the drivers from the original disk, tried connecting to original PC and new laptop - both XP/SP2 - same results.

I read the thread that ended in December 2006 for this model - no suggestions I have not attempted.

Is this a matter of planned obsolescence as was suggested in another thread about Canon S 900 printers?

Any help is gratefully requested!

-- Dave
 

A:Canon i560 Printer

Any time a machine with moving parts is stored for a long period of time, there's a chance it just won't work again. If the garage was not temperature-controlled, the chance of hardware failure is even higher.

Without knowing the specifics of the problem, that's the best I can come up with.
 

3 more replies
Answer Match 50.4%

I'm going mad trying to use this printer!
I have found only the Vista 32bit drivers.
I tried to install them (by manually select them, not with an exe application, so I can't choose the vista or xp compatibility check) to my windows 7 32bit but at the end I got an error about the spooling service that was blocked during running.
can anyone please help me? thanks!

A:Canon Printer LBP 1120

It is best to uninstall the old drivers and run the exe file in compatibility mode for the new driver.

Here's a link to Technet for the same problem.

Canon LBP 1120 can't install : Windows 7 Hardware Compatibility : Windows 7 Beta : Microsoft TechNet Forums

8 more replies
Answer Match 50.4%

My i 860 printer is using all the colors to print just plain black text. I even set the print preferance to print in grayscale, and it is still using the color tanks. They are running out(low ink warnings) despite the fact I have not printed any color in a while. Here is my question, it is obvious that the printer is setup to only use black when doing text because there is a seperate large black inktank right next to the smaller one used for photo printing. Can anyone tell me what settings to use to only print plain, black, text? Of course I tried canons website support and phone support when it was under warranty, but would have had better luck asking a chimp to solve the problem. Love the print quality, but their customer help is non existent. Thanks
 

A:Canon i860, printer ink HELP!

Take out the color cartridge when it isnt being used : )
 

3 more replies
Answer Match 50.4%

I cannot now print from Word Pad ,it used to work just fine. I can print almost from anywhere except word pad.
What I used to do was hi-lite or "select all' an email and paste it into word pad ,click file or select the little printer icon and print .Now nothing happens.Can anyone help.?
 

More replies
Answer Match 50.4%

Hello,
This seems to be a fairly active board. I hope someone has some insight into this...

I've spent way too much time on this already, but its driving me crazy because I can't figure it out. I have a Canon Multipass C530, which I don't even like, but that I want to put in my restaurant kitchen so I can plug in my laptop if I need to print something out. I really don't want to buy something new for this. I don't want to be mad when a bucket of salsa gets dumped on it, and since I already hate the Canon...well, you get the idea. Anyway, my Laptop (Toshiba Satellite) runs on Windows XP (which I'm also not sure I like yet, but that's another story). There was no pre-installed driver for the Canon, so I went to Canon's web site and downloaded their supposed solution for the XP/C530 incompatibilty. I followed (or tried to) the instructions exactly, which were basically to run a setup.exe file, re-start, then run a setup2.exe file. The problem was, when I tried to run the 1st exe. file, I got an error message saying that the printer must be connected before set up could proceed. I tried again & again & again, and each time, I got the same message. I checked all the obvious stuff. Yes, the printer was plugged in. The cable was connected properly. The printer port was functioning. I even plugged the printer back in to my old computer to make sure it still worked. It did. But for some reason, the program on my laptop would not recogni... Read more

A:Canon Printer & Windows XP

9 more replies
Answer Match 50.4%

My client's boyfriend bought her a Canon Pixma MP210 for Christmas. Ever since she has not been able to print properly, because of banding. Despite doing Nozzle Checks, cleaning print heads (deep clean as well), alignment tests, nothing works; I've exhausted all the tests.

The driver version is MP 1.00, and there are no driver updates available.

The OS is Windows Vista Premium SP1 with 2GB RAM and a 160GB hard drive
 

A:Canon printer banding

Have they tried Canon's support? Or does it work on another PC? If not, Canon needs to replace or repair. Hopefully it is still under warranty. They don't make 'em like the used to.
 

3 more replies
Answer Match 50.4%

Here's one for ya. Gold stars to the person who answers this one.

Have a CANON MP640 scanner/printer. works great. prints, scans, fine.

Canon*Pixma MP-640 Multifunction at Camera Action Camera House the Digital Camera Specialists

One thing.

When you click the icon to scan; a 'Pictures' folder shows up magically on the desktop.
What is it? All the 'sample' wallpaper photos that came with the OS.

I delete it...and then it comes back if you repeat the process.

A:Canon printer mystery

Could be just a short cut you are deleting next time try right clicking and see if the option go to file location is in the properties if so go there and delete them from there

2 more replies
Answer Match 50.4%

I've just got canon bjc 2000 printer
the problem is about cartridge
i've got BC-21e cartridge but when i try to print any document the computer keeps saying to replace photo BC-22e cartridge with BC-21e or black.
why does it say that when on my cartridge it clearly says that it is bc-21e?
 

A:problem with canon printer

You have an answer under your other thread:

http://forums.techguy.org/t215392/s.html

Cookie
 

1 more replies
Answer Match 50.4%

HI,
I have a Canon MP600. This morning I was printing several pages of type and it started missing lines...as if clogged or out of ink. Ink tanks are fine and nozzle check pattern printed out beautifully. I tried again and all it outputted was a blank page. I tried copying and also gat a blank page. Printed a test and again printed well. I uninstalled and re-installed all the software with the same results. Printer says it is online and the scanner works fine. I am using a Dell 8400 with XP Home and nothing was changed since last night. All I get from the online help at Canon is "unfortunately your printer may need service".

Really appriciate any ideas, service these days seems to cost more than the device.
 

More replies
Answer Match 50.4%

I have a canon D760 xerox printer and my boss wants me to clean the fuser. Couple things, I dont know what the fuser is or looks like,( went online to look, but still a little vague ) and when i find it how do i clean it? I been looking for documentation online, but I couldnt find one for this brand of printer. Plus they tell you you need all these tools to clean it, is this nessecary?
 

More replies
Answer Match 50.4%

Recently installed a Canon iPF700 printer to the network at work. Now, whenever I try and print, it doesn't give me any media options other than "plain paper". Anybody know how I can change this up? Any advice would be great. Thanks.
 

More replies
Answer Match 50.4%

I recently bought a Canon BJC 1000 and i cannot get the computer to print on the parellel port.I have also tried a network card,and that didn`t work either any suggestions?
 

A:Cannot Connect My Canon Printer

what type of parallel cable did you use? some printers require different parallel cables, such as bi-directional, IEEE, ect...

Look up the model printer on the manufacturers website and see what cable it calls for.

------------------
Anthony
 

2 more replies
Answer Match 50.4%

OK ... so I have inherited a Canon ix4000 printer.

It's a good printer ... does A3 & A4, colour, photo's etc. It's USB not that that should make a difference.

I have a Windows 2003 server upon which I wish to "hang" this server so that everyone on my home network can use it but there don't appear to be any acceptable drivers for it ... XP seems to be the latest available (can't even find Vista ones) which is a pain.

More than a pain it almost feels like Canon might be deliberately not making a driver available because they don't want such a printer used as a network one.

I managed to install a Windows 2000 driver but I can't make the printer print ... it just errors.

Any ideas? Thoughts?

Kyu
 

A:Canon Printer Under 2003

Their is Vista support for ip4000 but I didn't see ix4000
http://www.usa.canon.com/opd/controller?act=OPDSupportVistaAct
 

1 more replies
Answer Match 50.4%

I have a Canon i9900 Printer connected to my powerbook G4 running OS X 10.4.6, i recently tried to print some photos out and it would not print anything out on the paper at all. I downloaded the newest driver for OS X on Canon's website and still not working. I check the print heads and all that as well. Still nothing is coming out.

My only thought is that the ink may have dried out seeing that i haven't used the printer in a month (it is for school projects/photography) but when I checked the ink levels by removing the cartidges it was fine, there was ink in them.

Anybody else have this problem?
 

A:Canon Printer Not printing

15 more replies
Answer Match 50.4%

Do you know where to get drivers for WIN 7 for the printer Canon iR1024i ?
Thank you

A:drivers for printer Canon

If W7 doesn't recognise it then use the latest driver from Canons website, even if all you see on offer is for Vista... I've installed W7 a couple times for people with Canon hardware and W7 has automatically installed perfectly good drivers by itself...

1 more replies
Answer Match 50.4%

Hi dear friends.
i have bought a canon lbp3010 printer and downloaded the driver for my system (windows 7 ultimate b7600)
when i want to install the driver, it shows the following screen:

HTML Code:
http://i50.tinypic.com/2wp35us.jpg
i have noticed that at the beginning of the installation,the printer spooler service stops!!!, and exactly after the printer installer software shows the dialogue box, it starts again!

it is to be said that i have already problems with my "devices and printers" section of windows, which shows the famous " close the program / check online for a solution" window everytime i open it. and after i cllick on "close the program" button,it shows an emty page!

Please help me!!

A:cant install canon printer

  
Quote: Originally Posted by masouddavodi


Hi dear friends.
i have bought a canon lbp3010 printer and downloaded the driver for my system (windows 7 ultimate b7600)
when i want to install the driver, it shows the following screen:

HTML Code:
http://i50.tinypic.com/2wp35us.jpg
i have noticed that at the beginning of the installation,the printer spooler service stops!!!, and exactly after the printer installer software shows the dialogue box, it starts again!

it is to be said that i have already problems with my "devices and printers" section of windows, which shows the famous " close the program / check online for a solution" window everytime i open it. and after i cllick on "close the program" button,it shows an emty page!

Please help me!!


It sounds like you are trying to install from devices and printers. You may want to try going right to the website and download from there, maybe that will work. If not try going to the site, and saving (not running) from the website. Then save to documents, desktop or any other place that you choose and try to install from there.

6 more replies
Answer Match 50.4%

With a Canon MG5430 (might be MG5420 or 22 in the US), on my desktop, only the calendar print is available in My Garden menu. My laptop lists all of the functions being available. The desktop was an upgrade to Windows 8. Could this be a Windows driver problem? If so, what are possible solutions? Thank you.

A:Canon Printer Problem

What OS does your laptop use currently?

1 more replies
Answer Match 50.4%

Had another all-in-one and was able to use it to send/rec. a fax.Can I do it with the Canon MP250 also?Need answer asap.No phone line was connected to the old printer,only to the modem in the computer.Was done via software of old printer and XP.
 

More replies
Answer Match 50.4%

I recently bought a Dell Dimension 4550 with XP Home and tried to install my Canon BJC 5100 printer. The Canon installation CD gave an error that it is not compatible with XP. I checked the Canon site thinking I needed a new driver and Canon shows my 3 year old printer is not supported for XP.

Is there ANY way to install my printer? Or am I supposed to junk a perfectly good printer, that I understand and enjoy?

I see $$$ flying out the window.

closed duplicate
 

More replies
Answer Match 50.4%

just bought a canon pixma mp600,installed all software which is recognised,but will only print on plain paper once then stops,wont do glossy or the disks,will print test page and from notepad,sometimes prints a bit then spits it out,have changed paper settings and am well confused,have uninstalled and reinstalled all software and rebooted over and over,any sugestions???? thanks liz.
 

A:canon printer problems,

6 more replies
Answer Match 50.4%

My Canon iP4000 does not seem to use the BCI-6Bk at all, even when I print color pictures.

The BCI-3eBk, as well as the BCI-6Y/M/C cartridges are now empty (or almost empty) while the BCI-6Bk looks as full as it was when I put it in.

What gives?
 

A:Canon printer ink strangeness

What do you actually print?

Images and anything web based often uses only the mixed colors, even when printing black (which is all colors additive mixed).

Word processors usually use only black unless you are printing color.
 

3 more replies
Answer Match 50.4%

I just thought I would tell everyone about a recent problem I had with my networked printer at home. We noticed that we could not print from any machine on the network wireless, wired or USB. I checked and checked until I was blue in the face but I could not make any headway. The printer would make test pages just fine and nobody has access to make network changes but me. I ended up reinstalling the driver on all machines to correct the problem. The only thing I can think of that would have done this is a Windows update. Anyway, just thought I would share my story so if anyone else has a problem like this they might get it fixed sooner than I did.

All machines are Windows 7 Pro 64 Bit.

Jeff

A:Canon Printer trouble

This may have been caused by the Windows update possibility that you mentioned. This MS website may explain it further for you.

Driver Signing Policy (Windows Drivers)

1 more replies
Answer Match 50.4%

I am trying to change my printer settings - I want to go to options while in Explorer and tick "print table of links" I can find the page and do the tick but the apply is dimmed so you cannot choose it. How do I make this change. Thanks
 

More replies
Answer Match 50.4%

I have started experiencing the following problem for the last two weeks with my Canon Pixma MX700. A printed text page shows skipped strips across the full width at several locations. Cleaning the nozzles with the Canon utility solves the problem. Unfortunately, the same thing happens again the next morning. Yet the nozzle check pattern test and the print head position tests when performed both indicate no problems. Any help or suggestions are most welcome. Thank you.
 

A:Canon Printer Problem

7 more replies
Answer Match 50.4%

Hi...the LCD on my printer has been in the "please wait" mode for 24 hours...and no matter what I do i.e. cut power, disconnect from the Mac, uninstall programs and reinstall them in short, nothing works. When power comes back on, it whirrrs for about 10 seconds which according to Canon help line, "may" mean a paper jam (there's no jam in there), no ink (there is black and color) install and unstall (which I've done). any ideas please ?:
s no paper
 

A:Printer Canon MP130 3 in 1

the "please Wait" message in the LCD of my Canon Printer turned out to be a fatal problem.

the folks at Canon told me the Printer was one of those "throw away" machines and that it would cost more to repair than to replace - and so the vendor (Staples) refunded the price and i bought another, an MP510 which works just fine.

Thanks for the helping suggestions.
 

1 more replies
Answer Match 50.4%

Here is the short version of my tech issue. Going on four months now and my canon laser printer Imageclass MF8050cn won't print from new Dell laptop or my sign. others Toshiba computer. It copies and scans but won't hold the drivers to print. I have troubleshooted over the phone and tech chat with Dell, Canon, Microsoft and Staples tech support. All the warranty dept. wants to do is replace it that won't solve the problem and there is new ink in there too. Printer was working fine with my old laptop with Windows Vista. Unfortunately, that computer is no longer working. Advice/Solutions please?

A:Windows 7 and Canon printer

Hi there,

Firstly can you check to see if your windows 7 32bit or 64bit.

Windows logo bottom left, then find computer on the list on the right. Right click it and go to properties.

It should tell you about halfway down under "System"
"System type: 32-bit Operating System"
"System type: 64-bit Operating System"



Quote:




Before starting the driver installation, connect only the LAN cable first, do not connect the USB cable at this time.
This is necessary for your printer to acquire IP address automatically before you start the driver installation and enable driver installer function.

Driver and application software files have been compressed.
The following instructions show you how to download the compressed files and decompress them.

1. Connect the printer to your network using LAN cable. (If applicable)
2. To download files, click [I Agree-Begin Download] icon, select [Save], and specify the directory where you want to save the file. Click [Save] to start the file download.
3. Downloaded files are saved in the specified folder in a self-extracting format (.exe format).
4. Double-click the files to decompress them. A new folder will be created in the same folder. The new folder will have the same name as the compressed file.
5. Double-click the decompressed Setup.exe file to start installation.
6. After the drivers have been installed, connected the USB cable to the printer. (if necess... Read more

1 more replies
Answer Match 50.4%

Just set up new Canon printer. When I try to print, I get the prompt

Printer performing another operation

It's a Canon PIXMA MX320. Can anyone help? I'm pretty computer illiterate. Thanks. J
 

More replies
Answer Match 50.4%

Hi There!

I am running x64 Win7 Pro, and I am trying to get my Canon i6500 working.

Computer says it's an unrecognized device, and I can't seem to figure out how to fix it. Was working fine in 32bit XP.

A:I6500 Canon Printer

Have you installed the drivers and received an incompatible message? If so, try right clicking the driver install package and select properties. Click on the compatiblity tab and check the box "run this program in compatibility mode for" either vista or xp.

5 more replies
Answer Match 50.4%

my canon i250 printer will not print correctly in black ink

I have tried the cleaning routine and have inserted a new (full) ink cartridge.
 

A:canon i250 printer

Support page at Canon may prove to be of some help. Click on 'Support and Service'.

http://www.usa.canon.com/consumer/c...loadDetailTabAct&fcategoryid=331&modelid=9208
 

1 more replies
Answer Match 50.4%

My printer is skipping every other line. Checked the cartridge and it seems OK.
Anybody have a fix?
 

A:Canon BJC-85 portable printer

Only thing that comes to mind is that the Printer is incorrectly defined (wrong mdl for instance), or the wrong driver is loaded.
 

1 more replies