Tech Problem Aggregator

Hardware Driver Won't Install

Q: Hardware Driver Won't Install

Hi,
I have Win7 Professional so I can run some XP programs. I just attempted to install my ADS Tech Instant DVD+DV so I can convert VHS to DVD. Finally found an upgrade to the Capture program that will open but the hardware driver won't install - I keep getting
'Windows could not find driver software for your device. If you know the mfg ..you can visit its website and check the support section for driver software.'
I have tried every driver they have that might work and I get the same response. At times I am able to access "Let me Pick from a list of Device Drivers - hit Have Disk - Browse - navigate to various extracted drivers I have downloaded - none worked. One driver did start to install but then - 'Windows encountered a problem installing the driver software for your device.' and 'Windows found driver software for your device but encountered an error while attempting to install it. This device cannot start (Code 10).'
One driver installed it was an x64 but it wouldn't operate the device - it was a Video USB Driver.
I think that is what I need - a USB driver - that's how the unit plugs in.

As a note, earlier this week I did a bunch of Windows Updates which updated and showed the various Devices with Removable Storage as (5) E,F,G,H,and I. After today's attempts they have all disappeared. ?? How can I get them back?? Maybe that is affecting my attempts. The machine does recognize when I plug in the ADS device. I've been doing it 'hot'. Not looking for permission to.
Appreciate any info. Thanks

A: Hardware Driver Won't Install

Do you have SATA in AHCI mode so hot-plugging is enabled? That''s your permission.

Try SysRestoring to before the updates then study them more closely to see what they do and watch what results from installing them in smaller groups. Keep the device plugged in as Windows Updates should detect it and cue up a driver in optional.

You don't say if there are Win7 drivers for the device. If so, try running their installer as Admin, and also browsing to their unzipped files from Device manager. Does it list in Dev Mgr even after unhiding all devices on View tab? Vista drivers may need to be installed in Compatibility Mode, as likely would XP: Compatibility Mode

Google the name of the device + Windows 7 or Vista and see how others have resolved the issue.

3 more replies
Answer Match 57.54%

Each time I try to install my new videomate tv tuner card drivers I receive an error message stating "Invalid Data" I have a Dell 4100 Dimension system running WinXP Professional. I emailed to tech support at Comprousa and they suggested that I down load the latest drivers and move the card to another PCI slot and start from the beginning. Well, I did what they suggested but Winxp starts to load the drivers but then gives the same error message does anyone know what the problem is and what to do about it?
 

A:Win XP hardware install driver error message

From their website I got the impression you should be running the latest reference drivers for your video card. That is, the driver from the video chip manufacturer, not the card maker.

The great thing about XP, is that there about a thousand ways to skin the same cat.

Try these:

Try to get as far as you can in the driver load, once it craps out on you, go into the Device Manager, find your hardware, it will most likely have a yellow exclimation mark on it. Right click and choose Update Drivers.

Cancel the install, in the control panel chose add/remove hardware and follow the prompts.

There are more ways too
 

3 more replies
Answer Match 56.7%

Hi!I bought a brand new Dell Inspiron 15r SE 7520 for christmas paired with an AMD Radeon HD7730m gaming GPU. This week, I tried to install the latest catalyst drivers from the AMD website (13.1) and I got this error message: http://imageshack.us/photo/my-images/829/screenshot5qk.png/ --> "AMD Catalyst Mobility cannot be downloaded due to insompatible hardware/software on your computer. The version of you graphic adapter is not supported. Please contact your notebook manifacturer for a graphics driver update."I tried to reinstall the same drivers many times, and still got the same error message. Freak, because the AMD 7730m is working properly in Device Manager and I am 100% sure I am using the right drivers. So here are the things I tried:-Uninstalling CCC completely in control panel + regedit and complete reinstall. Nothing changed.-Deleting the AMD GPU in Device Manager and removing all of its drivers in order to reset it. Nothing changed.-Installing the AMD beta drivers. They successfully worked for about 5 hours, and then after they automatically uninstalled (???) and I am back at the starting point.-Installing modded drivers. No luck, it just automatically uninstalled just as the beta drivers. Really, this is awkward.So now I'm stuck. What should I do? Any advices? Need some help over here!Thank you very much.EDIT: I went to Dell Canada's website to update the drivers and it seemed to work. However, those are the OLD graphic drivers from no... Read more

More replies
Answer Match 56.7%

HP Spectre 14t-3200
Earlier today, Steam was refusing to open so I did a hard reset by disconnecting the battery. Steam worked afterwards but now my computer has no sound. There is a red x next to the speaker in the task bar. When clicking on it it goes directly to "detecting problems" and then states "troubleshooting cannot find the problem."
I did a system restore to 4 days ago and it did not solve the issue.
 
I downloaded the IDT driver off of hp's website and I get the error message "The hardware detected is not supported by this IDT Software Package" when I attempt an install.
In device manager, under "sound, video and game controllers," I have "intel display audio." When clicking on properties for that it states "the device is working properly."If I go to volume mixer it says "no audio device is installed."
 
Bluetooth speakers DO work.
 
My computer has beats audio and the little light under the "b" is not lit, but the computer is running pretty warm underneath the right palm rest, where the audio knob is located. 
 
I have absolutely no idea what to do. 

More replies
Answer Match 56.7%

Quote:




The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit.




first off, I dual boot between Ubuntu and XP
the motherboard is an Intel server motherboard 2.8ghz
It has an AGP Nvidia 6200 video card. And supported by the Nvidia 280 driver
The computer motherboard is an Intel server 2.8ghz with agp slot

I did notice under system devices and exclamation mark on AGP to PCI controller something or other. Also with that card in, there is no video catagory listed in the devices listing

On XP I can not get the Nvidia driver to install. Ubuntu Nvidia driver is fine.
The card is working in other PC's.

There might be a possible solution here. One of these INF files is for XP and the 260 driver
Installing Nvidia Mobile GPU Display Driver on Notebooks Upgraded to Windows 7 x86 / Windows 7 x64 - Komeil Bahmanpour

the board looks like this here
Intel Server Board S875WP1-E Intel 875P Socket 478 ATX Motherboard w/Pentium 4 2.8GHz CPU Heat Sink & Fan S875WP1-E

So what to do?

A:Nvidia driver wont install, no compatible hardware??

Hi and welcome to TSF please run this and post the info from it Speccy - System Information - Free Download

Publish a Snapshot using Speccy

7 more replies
Answer Match 55.44%

(I hope this post is in the right place. If not, I apologize.)

Hi everyone,

I'm having some problems with my Windows XP SP3 desktop computer after a crash a few weeks ago. I took the computer in and had it repaired (the people said they did a repair installation of windows, which I had tried myself and failed). After a little tweaking, it seems to be back to normal except for two things: my webcam and my scanner needed to be re-installed, only re-installing them gave me the message "There was a problem when installing your new hardware. Your new hardware might not work properly" and now my webcam program (bundled with the webcam) "amcap" and my scanner program "Scanwizard" both say that I don't have the respective hardware attached to my computer when I try and run them. I have tried uninstalling the hardware and restarting then re-installing them and have had no success. I don't know what I'm doing wrong, and I would greatly appreciate some advice and/or technical help.

Thanks in advance,

Jomon
 

A:Imaging hardware centralized driver code 39 after Windows XP repair install

The repair install might not have been the right thing to do. You may be dealing with partial drivers left-overs... You might try using a "driver cleaner" and see if to can remove these partial drivers
 

3 more replies
Answer Match 51.24%

I'm at a loss as to how to get rid of install wizard message, "Found New Hardware - Windows needs to install driver softwarefor Universal Serial Bus (USB) Controller". Remains on desktop.  My printer is USB attached and working fine.  I've been into the Device Manager and tried seemingly everything possible...with NO success.  Desperate for help...thanks!

A:Message,"Found New Hardware-Windows needs to install driver software for USB Co"

You are using Vista? How long has the problem beenwith you?What printer do you have? Some all-in-one printers require install of up to three devices to be complete.

7 more replies
Answer Match 51.24%

hye
I'm having this problem since few months ago. before I had installed a software named VMWare for my college's assignment in order for me to use Linux Ubuntu. but apparently it gave me a lot of problems until I decided to uninstall the software. after I uninstalled, all NEW USB devices such as external HD, flash drives and etc cannot be detected and windows always prompt "Found New Hardware" pop up message and require my windows to install driver software for my USB devices. I tried clicked the "Locate and install driver software (recommended)" but it still prompt out again the message. it happened for all new USB devices. I don't know why. maybe it happened after I installed the VMWare, I guess?

can someone help me with this? I cannot use my new flash drives and external HD for me to transfer my works. it's so tiring
 

A:Always prompted with "found new hardware" to install driver software for any USB device

Have you tried reinstalling the chipset drivers, which would generally be responsible for USB support?
 

40 more replies
Answer Match 50.82%

not sure which section this pertains to specifically, but "drivers" seems close enough.
issue

i recently upgraded to an sli graphics configuration. since upgrading, my previous method of avoiding the TDR driver crash has stopped working.
known fix that i can't get to work anymore

when running a single gpu, i could disable and uninstall the nvidia hd audio device, then disable and uninstall the hd audio controller under system devices. problem solved, no crashes.

after adding the second gpu, there are now two hd audio devices and two hd audio controllers. upon disabling or uninstalling either controller, the system automatically re-installs the hd audio devices previously uninstalled, which in turn causes the hd audio controller to re-enable/re-install itself.

to be clear, all hd audio devices and hd audio controllers on my system must be disabled AND uninstalled to prevent TDR (or, since the upgrade, full system freezes or restarts. sli = double TDR?)
already tried it

Drivers - Turn Off Automatic Driver Installation this tutorial does not stop automatic driver installation, it just prevents the downloading of drivers from windows update. tried it anyway, no help.

How to Stop Windows From Detecting New Hardware | eHow disabling automatic hardware detection as described here does not prevent automatic device recognition and driver re-installation.

safe mode does prevent the drivers from re-installing immediately, however it also prevents most software fro... Read more

A:Disable automatic hardware detection and/or automatic driver install

Disable this service:

UPnP Device Host

5 more replies
Answer Match 47.46%

In My Device Manager appears a exclamation mark next to the SCSI/RAID Host Controller

LIKE THIS

AND WHEN I CLICK IN PROPERTIES APPEARS THIS
I ALREADY CLICK IN TROUBLESHOOT
AND ONLY THIS APPEARS

How can I fix this???
Any help is greatly appreciated
 

More replies
Answer Match 47.46%

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) <-- This god for shaken message is stopping me from enjoying my computer.

The driver is MAT****A DVD-RAM UJ-861H ATA Device

And that up there is the error message, i havnt downloaded anything i just pressed the button on the cd/dvd drive and my computer shut down and when i turned it back on nothing it it worked.

Does anyone know how to fix this? Im practilly computer illiterate so please be easy on the big words and stuff =]

A:Windows cannot load the device driver for this hardware. The driver may be corrupted

Please try the steps below:

1. Uninstall all third-party burning software, such as Nero and Roxio.

2. Perform a Clean Boot to test the result.

Clean Boot

========
a. Click Start, type "MSCONFIG" (without the quotations) in the Search Bar and Press "Enter" to start the System Configuration Utility.


Note: Please click Continue if the "User Account Control" window pops up.


b. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
c. Click the "Startup" tab, click "Disable All" and click "OK".
d. Restart the computer and test the issue.


Note: Clean Boot is a troubleshooting step. If some programs have been disabled, we can re-enable them later. If you see the System Configuration Utility, check the box of "Don't show this message" and then click "OK".

Please test this issue in the Clean Boot environment. If the issue disappears, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.

If the issue persists, please contact your computer manufacturer to check if the DVD drive is damaged.

If not, you may need to restore the system to its factory settings.

Hope it helps.

2 more replies
Answer Match 47.46%

Hello everyone, I'm new here and after searching without finding i am asking for your help.
I have just updated from Me to Xp update install,all is working fine except the sound card drivers won't load and in the device manager it says
'Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)'.next to my 'Creative Audigy Audio Processor(WDM)
My system is:

a7v8x-x asus MB
amd sempron 2500+ socket A processor
audigy platinum ex
512 MB RAM
I have updated the MB and the Processer Bios,I have installed sp2for XP,
I have tried to follow 'instructions' from Creative Support etc.
I really need some advice.
Thanks
Kurt
 

A:Windows cannot load the device driver for this hardware. The driver may be corrupted

Go to the sound card makers web site and DN the latest XP drivers.
 

1 more replies
Answer Match 47.46%

In My Device Manager appears a exclamation mark next to the SCSI/RAID Host Controller

LIKE THIS

AND WHEN I CLICK IN PROPERTIES APPEARS THIS
I ALREADY CLICK IN TROUBLESHOOT
AND ONLY THIS APPEARS

How can I fix this??? I really need help to fix this
Any help is greatly appreciated
 

A:Windows cannot load the device driver for this hardware. The driver may be corrupted

8 more replies
Answer Match 47.46%

Please help me. For both of my cd/dvd rom drives I get the following error: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Click Troubleshoot to start the troubleshooter for this device. How can I fix this?

Any help is greatly appreciated,

thisismyuser
 

A:Solved: Windows cannot load the device driver for this hardware. The driver may be co

16 more replies
Answer Match 47.04%

I have this problem:
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)

The driver could not be loaded because a previous version of the driver is still in memory.

and now I am not able to connect any usb device to my laptop making it virtually impossible to use windows 10.
How do I downgrade to windows 7,have enough of the beta testing.
I even have a purchased version of windows 10 pro which I really regret buying, worst investment ever.

More replies
Answer Match 44.52%

Note: I will get an export with DM Log Collector this evening when I get home from work but I wanted to start collecting some opinions on the subject and I do have a BlueScreenView export to hand.


I was experiencing a BSOD during Windows 10 Pro x64 installation on a freshly built computer, the installation would get to 80% ? 100% and BSOD with a variety of errors, mostly IRQL_NOT_LESS_OR_EQUAL

After about 10 attempts with different UEFI settings disabled (Intel NIC, XMP Disabled, Updated UEFI, etc) the install stuck and I was able to load into windows thought this was pure chance.
In its current state the OS boots up fine and I can log in but I have about 1 ? 2 minutes before I get a BSOD, the like of which are attached in a TXT file from BlueScreenView (I will get the proper DM Log Collector files this evening)


I have tried:

Checking CPU temperature (32 Degrees C)Updating MB UEFIDisabling and disconnecting NICs as I found several threads on google identifying Intel NIC drivers as a possible causeReseating all hardware and power cablesRemoving each stick of RAM in turnInstalling from UEFI and LegacyDifferent media (VL image, Media Creation Tool Image)Installing from USB3 & USB2 PortsWith and without XMPInstalling Chipset drivers in the ~1 minute I have in the OSUninstalling video drivers in the ~1 minute I have in the OS as I remember hearing about significant issues with Windows 10 and nVidia DriversInstalling latest nVidi... Read more

More replies
Answer Match 43.68%

Hello all-

My friend has an old laptop laying around that was broken so I told him hey what the heck bring it over and I'll fool around with it. He brings it over and I get my good old external HD that I use YUMI to install windows with. This thing is going nuts beeps & boops the whole time; I figured out the built in keyboard is fried due to liquid damage at some point I yank it out, I connect my dell wired keyboard that I use for all my "projects" and start again. I wipe the laptops HD and start my install. It completes the install portion that is booted from my external then restarts into in windows to finish the install on its own HD. Makes it all the way to the end where the screen flickers like its adjust the resolution. Moments after that "Windows could not be installed on this computers hardware- please restart"

I check everywhere online and I find a tutorial on this site that explains how to enter device manager in safe mode while installing win 7 (which I didn't bookmark like a fool!) I find that it has a LIST of drivers not recognized (graphic card is one). I down loaded the drivers from Acers website but while restarting the Win 7 install I click i the load with drivers button and it says they aren't in driver format.

I'm lost- about the call this laptop broke, done, cooked. I pulled the laptop HD out and ran disk check from my Dell desktop it was fine. The liquid damage doesn't appear to have damaged the internals of the laptop, the d... Read more

A:Win 7 Install Fails Home Pre (Can not install on this hardware)

Try the steps to Troubleshoot Windows 7 Installation Failures - Windows 7 Help Forums.

Install only the wireless or ethernet drive when you get online to pull in all other drivers from Windows Updates, after enabling Automatically deliver drivers via Windows Update (Step 3)

1 more replies
Answer Match 42.42%

Ok i just reformated my dads laptop and now i need to upload all the drivers for it. Where can i figure out the spefic names of the hardware and where can i get older drivers as this computer is fairly old.
 

A:Driver for my hardware

7 more replies
Answer Match 42.42%

I have updated all drivers and get this bug (see pictures)
same i get on windows 7 but after getting this it show blue screen and restart PC and for error write blue screen (look here posted on sevenforums forum Blue Screen - Windows 7 Forums )
here on vista x64 it stay like on screens and no reboot
My PC:
Q9450
8800GTS 512 MB (G92)
4GB DDR2

(this strange screen i get now after installing windows 7 (i formated disk) before year ago vista worked fine )

A:Driver or Hardware ?

erm what bug? what am i missing?

1 more replies
Answer Match 42.42%

Hi, can someone please tell me whether the driver version 2.0.0.20 for "Texas Instruments PCIxx12 Integrated FlashMedia Controller" is the correct and latest ? why drivermax report a newer driver version of this device is 29.405.2.8

When I installed this driver 2.0.0.20, my device somehow is shown in my computer as drive (F) and (G), is it normal?

A:Is this the right driver for my hardware?

  
Quote: Originally Posted by firefox2010


Hi, can someone please tell me whether the driver version 2.0.0.20 for "Texas Instruments PCIxx12 Integrated FlashMedia Controller" is the correct and latest ? why drivermax report a newer driver version of this device is 29.405.2.8

When I installed this driver 2.0.0.20, my device somehow is shown in my computer as drive (F) and (G), is it normal?


Don't know why driverMax report it...but looks version 2.0.0.20 is the right one (after a quick research). The drives (F) & (G) are shown like that even empty, looks again normal.

2 more replies
Answer Match 42%

I'm gettin' for Christmas either a DVD write/re-write drive, or some ramsticks; possibly both.

I'm cleanin' house too (re-format HD), and am wonderin' if it's best done before new hardware addition, or after new hardware addition...
 

A:re-install OS pre, or post new hardware install?

Probably before, but is should not matter much either way
 

1 more replies
Answer Match 42%

Hello All,

I am having a hard time with my HP laptop. I have an HP Pavilion ze2000 with an AMD Mobile Sempron Processor. It seems that my laptop has decided not to accept any ATI drivers for the ATI Radeon Xpress 200m that came installed in the computer. I have tried everything that I know possible and yet I can not seem to get the drivers to install. I am trying to use an S-VIDEO cord from my laptop to my flat screen T.V. however, when I press the fn and the f4 keys to switch moniters, it will not let me, and in my Device Manager under the Video Adapter it has an asterisk next to Video Controller (VGA Compatible) Here's what happends when I install the drivers.
At the start of the installation, everything starts off great, the ATI screen pops up and then the Install Wizard tells me it's going to install the ATI software, then the License Agreement. After agreeing I choose the Express (Recommneded) option. Then it starts to copy files and then it stops and a message box comes up saying, "Setup was unable to complete the installation. Try to set up your display adapter using a standard VGA before running setup". I have tried to do a "force" install through the device manager. I do have the most recent drivers for everything else, it's just this one issuse. I am so stumped it would greatly appreciated if anyone can help me with this problem.
Thank You Greatly,
Invidia
 

More replies
Answer Match 42%

So, before i get started with the problem (beware of text wall)
My system:
Amd Phenom ii 1055T (2.8GHz)
Asus R7 260x OC 2gb
8GB of ram
ASRock 970 Pro3 R2.0
650Watt PSU

So, i have been experiencing this weird crash, ever since i upgraded to windows 10 and upgrading to the 260x (from a 5850). It is a BSOD but it not... blue, it is pixelated like a crashed BSOD and it is almost like a green and blue statick effect, i can see the behind all the mess so it MUST be a BSOD right? I can't really explain how it is, it is a REALLY messed up BSOD.

I would upload a picture but the system restarts too fast so most of the time i don't have time to take a picture, it doesn't crash under load or anyting it is completely random.

At first i thought it was a hardware problem so i bought the 260x ,its not just that, my brother who plays on his A-10 7850K alone gets the same crash too. So i was wondering if it was a driver problem? I did some research and many people have problems with their 260x crashing in a simillar way. I am no expert but if this is a common thing in AMDs cards, i might as well go with Nvidia.

More replies
Answer Match 42%

Hi,I installed Cyberlink Youcam. And on running it, an error  "You do not have a compatible VGA hardware or driver to run YouCam"My laptop is:Model: HP 15-r005ne notebook pcProduct number: J1W69EASystem type: 32-bitSome help over this.

More replies
Answer Match 42%

Hello, everybody.
 
I was just wondering how to look for hardware updates, specifically a touchscreen driver. The specific ID for my driver is HID\VID_04F3&PID_0379&COL01. If anyone can help, then please respond.
 
Sincerely,
organanon
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.
 

A:B50-30 - Hardware Driver updates

Please post your model number.  Example: G70 or B560.  That information will help those responding provide specific answers. 
 
If you are using Windows 10 have you tried using the Companion 3 app to see if it locates the driver for you?
 
Otherwise you can do a manual search for newer drivers by visiting the link below.  The download list can be sorted by the most recent date, but it is still a good idea to check version numbers.
 
http://support.lenovo.com/us/en

5 more replies
Answer Match 42%

I have recently installed Win2k on an old Ascentia notebook (in order to make it easier to set up a small network). I have been fiddling around installing various bits of hardware (USB card, network card, ADSL, scanner etc.) and software. Somewhere in the process I have started to get a message asking me to install the drivers for VID_04E6PID_80000002 . (it is also visible under Other Devices in device manager).
I have tried letting it search for a driver including on the net but it cant find one.

The only reference I can find on google is some site that lists it as a key phrase used on search engines!!! - clearly others are confused as well.

There is one other reference at http://www.datafabusa.com/tbs_pp_card_reader.htm but that winds up telling me to "install the right drivers" which is the problem anyway!!

Does anybody know
what it is
where can I get a driver
does it matter anyway
should I just remove it from the hardware profile
or anything else of use.

Thanks.
 

A:Driver Required. Hardware not known.

Found http://forums1.itrc.hp.com/service/...umId=2&admit=716493758+1079096296875+28353475 don't know if it will help.
 

2 more replies
Answer Match 42%

So... whenever i got to open up Blender i always recieve this message: "Your system does not use 3D Hardware Accelaration. Blender requires a graphics driver with open GL with 2.1 support.This may be caused by:*A missing or faulty graphics or driver installation.Blender needs a graphics card driver to work.*Accessing blender through a remote location.*Using blender through a virtual machine. This has never happened before so im wondering what could of gone wrong.

More replies
Answer Match 42%

Hello there, I changed one of my HDDs around two weeks ago and also started to connect external HDD to the front usbs slots daily right after that (It not connected 24/7)

Day after that I got BSOD when I download things in all of my 3 HDDs and web in firefox and have IE10 opened in the background as I do daily for years. suddenly my mouse freeze and I got BSOD that claim it may be driver or hardware, I got it before with other system or maybe even on this one some long time ago and it just was fixed alone after restart as the BOSD stated, probably because win7 auto fix it.


I don't think it the HDD because I have three of the same kind and they all work fine (I just got one BSOD while I do what I always do even at this very moment and 100% of the time I never get BOSD and the system don't look like it under any stress)

Today I suddenly got another one. I let win7 look for fix in the second time and don't know if it fix the issue, it happening very rarely honestly.

I didn't touch the drivers but I know that my mobo have annoying bios so it may have hard time having 3 HDDs with the exact same version

I don't think it the HDDs or my gaming mouse, it may be the external HDD but I don't sure, all HDDs were tested with the last version of Crystal Disk Info and seem fine.

I send the dump files hoping to find someone who can help me debug them and tell me what the issue is


Thanks

A:Had BSOD twice and not sure if it hardware or driver

We need more information to analyze your logs. Follow Blue Screen of Death (BSOD) Posting Instructions, let the tool run until it has completely finished and then upload the new logs.

9 more replies
Answer Match 42%

I have been getting erratic Blue screens for over a month now. I had re-installed 64 bit Win7 Ult and they stopped for awhile but have recently begun again.

I have run memtest to 800% with zero errors, run prime 95 for hours with no errors, Furmark in extreme burn in mode for hrs, and run HD tune to determine the integrity of my HD. All to no avail. This makes me feel it is a driver issue, which can be very difficult to track down. Any and all help will be greatly appreciated.

System:

Win7 64bit Ultimate
Phenom ii x4 955 C3
Ati HD 4870 1 gb
4 gigs ddr3 1600 Ram
Gigabyte 880g Ud3h Mobo
Samsung F3 1tb HD
Asus 24x DVD CD burner
Antec earthwatts 650w PS
21.5" LG 2ms 1080P monitor

Below are the links to The DMP file. Only 1 as i did a system restore without saving the rest. Also have performance monitor data and Win7 BSOD Jcgriff file.

Let me know If you need any more Info.

Thank you

A:BSOD Driver or Hardware?

Looks like your Atheros wireless adapter drivers are the cause. I am having trouble locating drivers for it, but perhaps Windows Update can be of help.

Try to find updated drivers for it, or disable the device in Device Manager.

Update your Realtek network drivers too: http://download.gigabyte.us/FileList...ek_8111_w7.exe


...Summary of the Dumps:
Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Aug 16 01:53:48.478 2010 (UTC - 4:00)
System Uptime: 0 days 2:52:29.086
BugCheck 1E, {0, 0, 0, 0}
*** WARNING: Unable to verify timestamp for athrxu6.sys
*** ERROR: Module load completed but symbols could not be loaded for athrxu6.sys
Probably caused by : nwifi.sys ( nwifi!Pt6RepackRecvNBL+103 )
BUGCHECK_STR: 0x1E_0
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????

6 more replies
Answer Match 42%

So my HP Laptop I purchased about a year ago had encountered some error while I was installing Sabayon Linux after creating the partition, etc. It was working until I hadn't realized I overwrote both the original Vista partition and the partition I created for Sabayon.

Well then I switched to a Beta version of Windows 7 and to my suprise it actually worked wonderfully, and my laptop was running perfectly. Unfortunately a few things I used often were not supported so I grabbed a copy of XP and was just going to start over with XP.

Unfortunately when I installed and booted XP, it could not detect any of the hardware, ie: graphics card, network card, etc.
So my question is; what do I do to get XP to function properly, as in how do I get my graphics card and network card detected? To my knowledge I have an nVidia but because it's not detected I do not know the model, and I have no clue what my network card is.

Any help is greatly appreciated.
-Ross

A:Hardware + Driver Problems

what is the make and model of the laptop? you can try searching, for example, ASUS's website for an ASUS laptop. If you can not find drivers there, try a windows update (select custom and then hardware tab)

3 more replies
Answer Match 42%

my cd-rom and dvd drive is not being recognized by my pc. An error message says cannot load driver. driver is missing or corrupted. will downloading the driver from the internet solve this and how do i reinstall them back. pls help
 

A:hardware driver problem

See here for the solution: http://support.microsoft.com/kb/314060
 

1 more replies
Answer Match 42%

Yesterday I decided to take apart my case and clean everything, and I cleaned EVERYTHING. The mobo, HDD's, gfx cards, sound cards and everything.

I have been using an ATI RADEON X850XT PE for about a year now, and it doesn't support pixel shader 3.0 so then I decided to put in a ATI RADEON X1600 instead. I sued to use the x1600 three years ago before I got my x850.

After I put in the x1600 i botted up Win7 and then everythign worked fine, so I went and installed the x1600 drivers, but halfway throu the driver installaion i started seeing rainbow colors oving across th screen, then really bad errors like the moue cursor coming up 10 times and then spots of the screen jsu8t going black. Thhis all happened during the driver intsallation so I cant turn off the computer. Right whn it was about to finish... BSOD

I don't think that this is a driver issue, the three years thati didn't use the x1600 I took very bad care of it, it was laying on the floor, someone probably stepped on it, I'm in south florida so tempratures go above 40C.

So then i thougt, alright my the card is probably bad, I'll just put my x850 back. SO then I put the x850 back into my computer and booted up. It started up Win7 (automatically put resolution to 800x600 for some reason) and i logged into my user account, it did some startup things, started FileZilla, started ATITool and it even showed my temprature on the screen (39C, that's very good for where i live). Then I thought, OK all is good and I put m res... Read more

A:Driver issue, or is my hardware bad.

just ordered a GeForce 6600GT video card, until then, Linux on my X850XT

4 more replies
Answer Match 42%

My system is a pentium motherboard, Win 98se, Office and IE6 c/w service paks

I recently installed an ADS Turbo 2.0 PCI plug and play USB card on my motherboard. This is a combo 2.0 and legacy 1.1 USB 4-port unit. When it came time to load the driver for the card, Iwent to "Device Manager" and located the listing for the USB card. It was apparantly detected as "NEC PCI to USB enhanced Host Controller". Using the "update driver routine, I was directed to load my Windows 98 cd-rom. Once loaded, the update routine scanned the rom and then announced that it could not proceed with the driver update. The message stated it could load the correct driver because file "openhci.sys" could not be found.
Because I went through the process of improving my O.S. software via the upgrade route rather than the full on CD method, and did that prior to 2000, I am wondering if I am now short a file that I now need to complete my USB hardware install? Is this file available from a source somewhere as a standalone? Is there another *.sys file that the Update routine would accept? Am I going to need anything else by way of files to complete this load? I have the software files for the card on CD-rom but without this particular absent file, which I think stands for "open host controller information.system" I am stuck.
Please advise. Thanks in advance, Copernicus, ends.
 

A:USB hardware driver problems

9 more replies
Answer Match 42%

Hi,

i have succesfully built my 15th computer 3weeks ago :

Generic Case
thermaltake 420w psu
Amd Athlon XP 2800+ (barton Core)
MSI - kt4v
2x512mb DDR 400 pc3200 Generic ram
western digital 200gb hard drive
nvidia 5200 fx

everything was working fine untill i decided to get a better graphics card
"sapphire 9700 pro ultimate edition"

i uninstalled the old drivers and then installed my new card.
i logged into windows an installed the latest ATI drivers cataylst 5.6.

rebooted my computer then it got up to the login screen part, the screen is all black with a mouse in the middle but i couldn't move it. seconds later the screen went black and shortly later the compter reset.

i tried to boot using the last recent settings that worked in the boot options and i logged into windows and then seconds after doing that the screen went black (stand by mode).

Can anyone Help becuase this is getting to the stage were i will need to hire a jackhammer.
 

A:Hardware or Driver Problems?

Have you connected the 4 pin power connector to the card?

If so, can you put your old card back in, and does it work ok?

Regards Howard :grinthumb
 

8 more replies
Answer Match 42%

Hello,
 
Over the past couple of days I have been having problems with USB devices. None of them (not even the printer) will work properly, with the error:
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)
I have tried various solutions on the Internet but they have not worked.
The driver could not be loaded because a previous version of the driver is still in memory.
I have tried restarting, reinstalling the driver and troubleshooting. Here is the report:





Devices and Printers


Publisher details


Issues found

USB Mass Storage Device is not working properly

USB Mass Storage Device is not working properly
Windows has detected a problem with USB Mass Storage Device.


Detected





View device details



Completed




Problem with PnP devices

Problem with PnP devices
There are problems with some PnP devices. Windows will take additional steps to further troubleshoot these devices.


Detected






Issues found


Detection details




6


USB Mass Storage Device is not working properly

Detected





Windows has detected a problem with USB Mass Storage Device.... Read more

A:Hardware driver issues...

Remove all devices plugged into a USB port and restart the computer to see if the problem persists.
 
If it doesn't, start adding the devices one at a time followed by rebooting until  you find the device causing this.
 
If no device is found to be the culprit usd the Fix it at Microsoft Support.

11 more replies
Answer Match 42%

Hi Please help.I have buy new hp laptop.Modal No. : 15-AC 122tuProduct     :  N8M18PA#ACJfacing driver issue not found all driver. Not working WIFI, LAN and Webcam when run webcam  showing alert "You do not have the compatible VGA hardware or driver to run youcam " tell me what to do. Where i will get all driver ISO cd which contain all driver by official?  

A:You do not have the compatible VGA hardware or driver to run...

Hi: HP does not support that consumer model for 32 bit operating systems. The only suggestion I can offer would be to try these 32 bit graphics from Intel, wireless, lan, and  bluetooth drivers from a business model PC... Graphics...2nd driver down on the left is the auto install file.   Install and restart the PC https://downloadcenter.intel.com/download/26078/Intel-Graphics-Driver-for-Windows-10-and-Windows-7-8... Lan: This package provides the driver for the Realtek Ethernet Controller in the supported notebook/laptop models and operating systems.  ftp://ftp.hp.com/pub/softpaq/sp74001-74500/sp74233.exe Wireless: This package contains the driver installation package for the Realtek RTL8723BE/RTL8188EE wireless LAN Controller in the supported notebook models running a supported operating system.  ftp://ftp.hp.com/pub/softpaq/sp75001-75500/sp75236.exe Bluetooth: This package contains the driver installation package for the Realtek Bluetooth in the supported notebook models running a supported operating system.  ftp://ftp.hp.com/pub/softpaq/sp75501-76000/sp75614.exe Webcam software... This package contains the CyberLink YouCam Software for the supported notebook models and operating systems. CyberLink YouCam is a webcam application that enables users to capture images and video from a web camera and apply visual effects to captured images and video. ftp://ftp.hp.c... Read more

1 more replies
Answer Match 42%

This is a clean install of 10 on a Gateway GT5404, originally a Vista PC.

There is nothing connected to this PC other then the keyboard, mouse, monitor, and a GTX 660, all seem fine. So I`m assuming this is something on the board, could one of you hardware ID experts have a look at the pics and give me your thoughts, If you need anymore info let me know., and Thanks in advance

BY the way, this is a clean install done after upgrading from 7 to 10. After that upgrade Device Manager was perfect, but aftera clean install it now has this little issue, so far there are no issues because of it, yet
Windows is fully updated. Now running build 10586, sfc is perfect etc.

A:Driver for unknown hardware

What are the hardware ID's in that dropdown that you have at "Device instance path"?

9 more replies
Answer Match 41.58%

First of, My English isn't that good.

Okay. Problem..

It began unexpectedly, my taskbar and explorer.exe are spazzing out. In the taskbar, the icons were moving fast as if it's being refreshed rapidly.

Windows, I have Chrome open and sometimes in the middle of an activity, it goes "not responding" and it's being refreshed like crazy too, sometimes it even minimizes the windows I have open.

I don't know wether this is Hardware or Software or even Drivers..

I need this to be solved/fixed as soon as possible.
 

A:Hardware/Software/Driver | Clueless

This could be caused by a virus or malware infection. What antivirus or antimalware programs are you using?
 

8 more replies
Answer Match 41.58%

Hello,

Anyone have an idea of how to update a hardware driver to tailor to your specific needs?

I would love to try and do this, but dont know where to begin. My brother is good with programing, and I am just a good researcher and tech-savy I guess one would say...

So if possible using only a finished (user ready) Driver setup downloaded from the manufacturer as a resource (and tools you all suggest of coarse), I would love to take on this task!

Thanks for all input/advise everybody
 

A:Solved: Hardware Driver Question

10 more replies
Answer Match 41.58%

My wife bought an ACER AX3400 64-bit (4GB memory, GeForce 315 video card) with "empty" HDD and no drivers CD from her friend. Installed WIN7 ULTIMATE and installed all the ACER X3400 drivers available on Acer download site. When she tries to play a quite simple card game, she gets the message "Hardware acceleration is either turned off or video card driver is not installed. Either turn on the acceleration or install the driver. I?d assume the driver is already installed as we installed everything on Asus driver site. How do we TURN ON the hardware acceleration so that the game won?t be inendurably slow?

A:Hardware acceleration alt. driver issue

Hi,
Can you take and upload a picture of the back of your computer to see where your lines are connected too ?
Usually a computer with a card in it will have multiple connections for monitors and I just want to see which one your connected too
Cheers.

4 more replies
Answer Match 41.58%

When I open up my 3d modeling program (Blender) I get a message that says the following:  Blender- Cant detect 3d hardware accelerated Driver! Your system does not use 3d hardware acceleration. Such systems can cause stability problems in blender and they are unsupported.  This  May be caused by: *A missing or faulty graphics driver instalation.Bleder Needs a graphics card driver to work correctly. *Accessing Blender throught a remote connection. * Using Blender through a virtual machine.   What should I do to fix this? Thanks for answering.

A:Fixing the 3d hardware accelerated driver

Hello Ureh,Thank you for posting on the HP Support Forums. I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicaly post ( serial numbers and case details).If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.If you have already resolved your matters, please disregard this message. Thank you Duane_D

2 more replies
Answer Match 41.58%

Hi!  My laotop always face this irritating Windows update erorr.This update is related to  HP - Other hard - HP Wireless Button Driver.  Although this is optional update from Windows Update, it is kind of irritating when you keep seeing it fail.The error is 0x80070436. I have read up Microsoft website and trying to fix it based on what are given. But none ofthem are successful.  In my Device Manager, I can see under other device category there is 1 unknow device. I tried to uninstall it and hopefullyafter a reboot, windows can auto detect it. Apparently this can't solve as well.  Appreciate anyone can share how to fix this irritating issue. Thanks a lot,Nkboy 











Solved!
View Solution.

A:HP - Other hardware - HP Wireless Button Driver

 This driver should correct it: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_124774_1&swEnvOid=4158

10 more replies
Answer Match 41.58%

 Hi, I installes an 820 and 840 G3 via SCCM Tasksequence including the driver package form here http://ftp.hp.com/pub/caps-softpaq/cmit/HP_Driverpack_Matrix_x64.html ,SP 75204 All driver are correct except the hardware ID VID_8087&PID_0A2B ( seems to be an bluetooth driver)I havent found a driver so far.Which one is it ? best regards Thomas

More replies
Answer Match 41.58%

Hi, all. This is my first post. I've searched all over for an answer and have read of other people having the same problem but have found no solutions. I do consumer support for my company's products. One of our hardware devices doesn't work well with XP service pack 2 and we have a new driver that solves the problem. I had a customer call in with this problem (her device doesn't work) and she downloaded the new driver and can't install it. I've talked to her 3-4 times, sent her numerous step by step instructions, etc to no avail. All I know is she has a Dell with XP SP2. The device did work before but I think she pulled the USB cord out with out stopping the device first (thus uninstalling the driver correct?). The old driver should get the thing working but I thought since I was talking to her she should get the new driver to make sure she won't have problems in the future.

When she uninstalls the driver, unplugs the device and then plugs it back in it never starts the hardware wizard (weather or not she restarts her computer as well) and the device shows up in device manager as "unkown device". She always has update the driver from device manager to start the hardware wizard. The new driver is located in the C:, and she has the old one on CD as well. No matter what combination of the hardware wizard we try nothing loads the driver. She gets several messages: there is no information about the hardware here (or something similar)... Read more

A:Problems loading hardware driver

8 more replies
Answer Match 41.58%

I get this message, "Display driver NVIDIA Windows Kernel Mode Driver, Version 311.06 stopped responding and has successfully recovered". Shortly after the computer screen turns black freezes up the colors sometimes go funny, sometimes the screen continually flashes..weird things like that. Then I get a blue screen with white text (Passes for like 5 seconds) and then the computer restarts.. I cant even open a window browser before the computer does this.

I am currently typing this on the same computer, but in "Safe Mode" and everything seems to work fine now.

I am currently running Windows 7 64 bit. This is not a new setup, computer hardware is about 8-9 years old at this point..

The graphics card is a NVIDIA GeForce 8800 GTS

Thanks for the help guys, hopefully I can get my computer back to working condition again.

Tom
 

A:Solved: Driver Issue or Hardware?

16 more replies
Answer Match 41.58%

I have FINALLY built my new PC and I have not gotten the driver updates for all the hardware yet. I am having trouble recognizing my two SLI videocards, 5.1 Soundcard, monitor, and Playing DVD's in the ROM drives. Will the updates fix a majority of these problems? Because They are showing that the computer can see them it is just not using them to thier full potential. What do you think?
 

A:Driver Updates & Configuring Hardware

Without the proper drivers those devices will not work properly, once you install the drivers then Windows will know what to do with them and they should then be fully functional.
 

3 more replies
Answer Match 41.58%

Hello my Friends,
I am here searching for some help in the most strange bug i have ever seen!

I have a Desktop XPS420. I know, is a old desktop but it works perfectly and quite fast!

Despite of non official drivers, i was using windows 10 10.586 normally on it, not even a bug! So i was trying to update do windows 10 anniversary (14.393) but i was getting some errors because of an old Microsoft office 2010 installed.
Then i used the windows 10 restore option to get it "clean" so a update shouldn't be a problem. Everything ran well, no errors, nothing. But after the restore is done, i just dont have any USB entrance working! All my USB ports are literally, offline. Doesn't even have power!
My first though was that it burned somehow, but i realized that in BIOS setup and any other "pre-boot" screen, everything works perfectly, all usb ports, etc.
So, i think that this weird situation is caused by drivers issues. Then I ask to expertises, how can I solve it? Does anyone know a driver version compatible with windows 10?
obs : I am really fu***. Since the UBS doesn't work, how do I control my desktop when there is only USB entrance for keyboard and mouse? LOL

More replies
Answer Match 41.58%

Ever sence I got my PC about a year ago (Made Custom by Alienware) there has been a "Safely Remove Hardware" icon. When I click on it to see what can be removed it shows my Driver and im pretty sure I dont want to remove my Hard Drive, So how do I fix this problem?
 

A:Safely Remove Hardware, Driver?

6 more replies
Answer Match 41.58%

dear sir, i tried to open my youcam webcam (hp pavilion g7) and it is saying i do not have the compatible VGA hardware or driver to run Cyberlink YouCam. What should i do

A:VGA hardware or driver to run Cyberlink YouCam. What should ...

i want to start my cyberlink you cam, but there is error while starting ,  you have not bga hardware or driver . so what can i do ? 

9 more replies
Answer Match 41.58%

I have recently reformated by computer and I can't use the standby option
I have a Toshiba satellite A15 - S129
this is what I see:

I think I'm missing a driver does anyone know exactly which one it is or where to find it?

A:standby driver? [moved from Hardware]

I am also having this issue. It was working fine for a couple of days then it just comes out of standby for no reason I can see. This is a fresh build as of last sunday and I have not updated any drivers but I have run all the windows updates.

4 more replies
Answer Match 41.58%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.20GHz, x86 Family 15 Model 3 Stepping 4
Processor Count: 1
RAM: 1021 Mb
Graphics Card: Intel(R) 82865G Graphics Controller, 128 Mb
Hard Drives: C: Total - 156319 MB, Free - 79515 MB;
Motherboard: Dell Computer Corp., 0N6381
Antivirus: AVG Anti-Virus Free Edition 2012, Updated: Yes, On-Demand Scanner: Enabled
Alright her goes another question for you all.
I have this wonderful program called perfect photo suite 6 which i would love to use on this computer now. It says that my video card doesn't support open GL 2.0. I have googled this and found that my hardware will support open GL 2.0 but the issue is i don't know how to update my hardware to allow this program to work. I went onto dells website and thought i downloaded the updates but how do i know that i did and how do i know which video card is running at present time? Do you understand what i am trying to say i can give information if needed. TIA
Paulina
 

A:Solved: Hardware driver issue

11 more replies
Answer Match 41.58%

Problem manifested this week however have had BSOD before. Device manager shows the GPU as an error "code 43" and wont use it.

Dell XPS 420
Windows Vista 32 bit (no service packs downloaded), came pre installed but do have OS disk. Re installed after the continuous blue screens.
System is approximately 2 years old
Intel quad core q6600 2.4 ghz
3GB DDR RAM
Nvidia Geforce 8800GT card
375W PSU

All test results should be attatched. Ill open up the computer in a while with the PSU brand and motherboard details, will post them again seperately.

Thanks for any help u can give me

A:BSOD, GPU driver or hardware fail?

Does the motherboard have onboard video, and if so are you using that at the moment? Do note that error code 43 means that the Geforce card itself has told the device drivers that it has officially kicked the bucket. The crashdumps also are unanimous: your device drivers waited for the GPU to do something and the GPU has - you guessed it - failed, multiple times. You'll want to get that dead suckweed replaced.

7 more replies
Answer Match 41.58%

kindly provide the compatible VGA hardware or driver to run You cam  for this product i.e. HP-15-af138AU

More replies
Answer Match 41.58%

I have installed CyberLink YouCam 4.0.0820 Deluxe in my laptop. I have hp pavillion dv9000 entertainment with windows 7(32 bit). After Installation when I double clicks Youcam icon from my desktop it says 'You do not have compatible vga hardware or driver to run Youcam'. I have standard vga graphics adapter. Pls Help...

A:You do not have compatible vga hardware or driver to run Youcam

You need a gfx driver for your gfx card Is this your gfx card? NVIDIA GeForce Go 7600

6 more replies
Answer Match 41.58%

hi all,
recently i installed XP Pro, and when i install the driver for the integrated ADI HD Audio Driver, it would come up with an error saying 'audio hardware not compatible with driver'. It is very weird because before i had formatted, i was using XP Home Edition, and it was working fine.
In device manager, the only thing with a question mark is a PCI Device (which is not the integrated sound). I have checked BIOS, Device manager, tried reformatting again.
What are some other possibilities? Any ideas would be great, thanks.
MrBenL
 

A:audio hardware not compatible with driver?

Welcome to Techspot!

uninstall that pci device. i dont know why that is showing up if you do not have a pci sound card installed.

instead of installing drivers for your card, try just restarting your PC and letting plug and play detect it. click cancel for all the dialogs to install drivers for it. wherever your driver files are, extract them to a folder if they are zipped or compressed or anything. then, go into control panel>system>hardware tab>device manager>and find your card. right click on it and click properties. click update driver (or reinstall or install whatever it says). click i will choose the location to install from. choose the folder where you downloaded your driver files to as the install folder. this should work if you have the right drivers. what is the exact name of your motherboard and brand and name of the card, etc? please post here so we can make sure that you have the best drivers for your card.
 

1 more replies
Answer Match 41.58%

I have a Toshiba L20 - brilliant new notebook PC.

Sadly it did not include a Line In socket, so I purchased the Imic2.

I cannot get the device to work.

Can anyone help me with the set up procedure?

I have Windows XP service pack 2

When I connect, it says New Hardware Found, and prompts me for drivers.

I have no drivers or installation disc. The device is plug-and-play and requires no drivers.

When I ignore all the prompts it decides the hardware cannot be found and will not recognise the device.

Perhaps you can browse C/Windows/SOMETHING to find the driver?

I inquired with griffin who said the iMic is only fully supported in Windows XP Service Pack 2. If you don't have SP2, you're likely missing some important USB audio drivers. They wanted me to contact Microsoft, because the USB audio devices are not being recognized properly.

I don't think it may be taht drastic.

Can anyone help with links etc to help set this up?

Thank you very much for your help, it is most appreciated

Lots of love - Belinda xxxxxxxxxxxx
 

A:Hardware Driver Installation Problems

Crazy Belle said:

I inquired with griffin who said the iMic is only fully supported in Windows XP Service Pack 2. If you don't have SP2, you're likely missing some important USB audio drivers...Click to expand...

The only patch/update/fix for XP that I know of is designed to add support for "Hi-Def" audio. Microsoft's KB888111. It is installed during many newer sound card driver installs. Without it, any "hi-def" on-board audio chipset will be detected as an "Unknown PCI Device" by XP. Perhaps this is the same cause for your non-detected device.

If you can't find this download anywhere, try installing some newer Realtek audio drivers (which should install the "Hi-Def Audio Pack" as part of its installer) Look for a large set of drivers (5+ MB) not a tiny little file. (~100KB)

awoolf
 

2 more replies
Answer Match 41.58%

I just installed a video driver for this computer, which a nice person here found for me, anyways when i startup or reboot now it says found new hardware and do you want to install. I already have it the video driver, so what i want to know is how to get rid of this every time it boots up. I know it's easy but i forgot. also i have a sound card driver in a floppy i downloaded, but i think it's shows in dos in a zip. how do i download it? And i got a couple exclamation point conflicks also in the device manager. I has win98. I just got an older TriGem and trying to redo it. It has 16 mb ram now and how much can i add not knowing all the specs, 128 or 256 ok?
Thanks

Ps Haven't installed AIDA32 in it yet
 

A:New hardware found & sound driver

16 more replies
Answer Match 41.58%

I have Windows XP Media Center Edition on a Dell E521. Just recently, within this past week, I have connected my USB SanDisk ImageMate SDDR-05 Flashcard reader to my computer in order to transfer picture files from my camera to the computer via a flashcard. While doing the initial setup the Wizard Install box instructs me through all the necessary steps, but it finally states that: ?the hardware was not installed because the wizard cannot find the necessary software.? I?ve attempted this procedure several times but always with the same result...I still can?t find the device anywhere on my computer, not even within the My Computer icon. On the device manager the SanDisk hardware appears (identified as USB CFII), but as a yellow question mark upon which I always end up uninstalling/removing it. I called SanDisk tech help and they said that their Flashcard Reader already has its driver pre-installed within every XP system...and that is why their website does not offer any ImageMate SDDR-05 driver downloads for XP. I have even tried changing to the other computer USB ports including one which my printer already works without any problems...but I still get the same none result. This hardware did work, without any issues, with my older Dell which had a Windows 98 OS. The SanDisk tech suggested I contact Microsoft... Any suggestions on what I could/should do to remedy this? Please help!!!!
Thanks

More replies
Answer Match 41.58%

Recently decided to upgrade my pcie wireless adaptor on my 2 year old rig, was using a tplink 150mbps wireless adaptor before. Bought a gigabyte GC-WB867D-I wireless adaptor, when i tested it the first time it didn't work so i assume i must update the drivers to the lastest, i upgraded the intelproset/wireless to the lastest version. However it still doesn't work, no wireless adaptor shows up at the change adaptor settings, i also tried searching for it at the device manager however it still cant be found. When i tried diagnosing the problem using the intelproset, it says hardware not bound to transport driver. The wireless light is lit btw, anyhelp is much appreciated thanks.
 

More replies
Answer Match 41.58%

I had problems with my computer crashing so the local repair shop re-installed Windows XP. Only one problem. Went to plug-in my flashdrive and the "New Hardware" wizard popped up, I went through the process, the wizard chose the Intel® ICH8 Family USB Universal Host Controller - 2832 and then it came up with a dire warning:
"The software you are installing for this hardware has not passed Windows Logo testing to verify its compatibility with Windows XP. Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing."
I tried deleting the existing drivers for the USB and re-starting Windows but the "New Hardware" wizard popped up again and the same problem......
Should I ignore the warning and install? or look elsewhere for a USB driver? Seems like the driver should work as wizard found the driver on my system.....
Any help would be appreciated,
Thanx, M.



 




 

 
 

A:USB New Hardware Driver Imcompatible with Windows

Ignore the warning. You have used this USB previously on other machines, and it was fine right? I would however install McShield on the machine, just to be safe. Also another tool, to make sure you are not transferring crap onto your freshly formatted machine. Since they formatted your machine, are there any yellow question marks in device manager? If so then I would suggest getting all your drivers with this tool.
 
Good luck, and let me know how things go.

7 more replies
Answer Match 41.58%

I have installed windows 7 64 bit, and now when i open Youcam its shows me - you do not have compatible vga hardware driver run youcam. However I have contacted HP team four times, first time then suggest me to download the driver from the below link http://support.hp.com/us-en/drivers/selfservice/HP-15-ac100-Notebook-PC-series/8499326/model/8819356i have download and install it but still not working, then they told me to download below link https://downloadcenter.intel.com/downloads/eula/26099/Intel-Beta-Graphics-Driver-for-Windows-10-and-... I have also download that link and try to install but it shows that your system not compaitable with this drive. Now pease suggest me how to do. 

A:you do not have compatible vga hardware driver run youcam

Hi: There are 3 Intel graphics drivers listed.  I don't believe any of them are the right ones. I think this is the one you need... This package provides the driver that enables the Intel High-Definition (HD) Graphics in supported notebook models that are running a supported operating system. If high definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp71257.exe  

1 more replies
Answer Match 41.58%

Can anyone suggest a reason why my computer's O.S. (Dell laptop, WinXP Profess., SP3) would not recognize a device driver file when the computer recognizes the hardware device correctly, then asks for the driver file (which is the correct file for the hardware) but can't seem to either locate it on the computer or "accept" it? I have posted this question in the "Hardware" forum, but got no replies. Then I started to think that it might not be a hardware problem since the hardware (a USB wireless adapter for WiFi) can be installed in my other computer but maybe some issue with my laptop's operating system. I have not had this type of issue with any other added hardware in the past.

A:New hardware driver file not recognized by Win XP

Sure.The driver is installed and damaged...the device is not functional...those would be my first two guesses. Installing an incorrect driver could be a 3d option.If the device is dead...no cure for that.If the driver is damaged...remove all drivers other than those which are working properly for other functions...then try to install the device, using the correct driver package.Removing unused device drivers from Windows XP machines - http://articles.techrepublic.com.com/5100-...tml?tag=nl.e101 Louis

2 more replies
Answer Match 41.58%

Hi tech-guys and girls,

Im having some wierd problems with my computers network (lan card) and grapich card.

Network:
My lan card has problems with downloads/uploads.
If i download anything over 100 mb, or watching some youtube vids after each other, sharing files between my computers, it suddenly cuts off the internet at says that there is limited or no connection.
The only way to get this to work again it have to shut my network down (network properties), then open it again.
Graphiccard:
My onboard Radeon X200 Mobile (x200m) on my laptop is also failing. If i watch videos in full screen (videofiles or youtube etc.), play games, edit videos and more, it suddenly crashes and restart the drivers.

It says something like "The display driver stopped responding and has now been restored".

Info about my chipset:
Northbridge ATI RS400/RC400/RC410 rev. 01
Southbridge ATI SB400 rev. 80
Memory Type DDR2
Memory Size 2048 MBytes
Channels Single
Memory Frequency 266.5 MHz ()
CAS# 4.0
RAS# to CAS# 4
RAS# Precharge 4
Cycle Time (tRAS) 12

Before you answer:
- The problem has been there for a while now
- My computer has latest drivers for these two components
- The same happens on xp and vista
- No viruses found (nod32 antivirus-tested)
- The computer it self has been cleaned for dust and other "dirt"
- I've googled it, but nothing found

If any have suggestions of how i can fix these two things, it would be very appreciated
 

A:Driver/hardware problems - Help needed

6 more replies
Answer Match 41.58%

My desktop went out of warranty and when I go to find updates and drivers the HP website won't take me to where I can find out downloads and install them? Matter of fact it doesn't seem like they will do anything unless I'm under warranty. At least Dell will allow you to download and update. I don't think it matters but I went from 8GB to 16GB of memory (that's maxed out on this desktop) that I would need any drivers or updates? This p/c is about 2 years old and would think there's some driver/updates available? 

More replies
Answer Match 41.58%

Well I have an hp dv2000 series. Service tag says dv2810us, above that it says dv2500 and bios model number says DV2700. So I don't know what I have actually lol. Anyways, its got win 7 professional 64 bit. Its processor is AMD x2 64 mobile. The problems I'm having is in the device manager. There are no audio/video/game controller listed AND it is not detecting my CD-ROM drive (I've already tried 3 other optical drives). I know you don't need drivers for the cd rom drives so I don't know what to do about that. However, for the audio drivers I have literally tried everything available to no avail. I either get an error messege saying the device for this driver cannot be found or there is no media for this device. I'm a computer tech so you can be sure I've tried everything I could ha. I'm getting a few other driver errors in the device manager, 3 of them are "base system device" and one of them is 1193 EEE controller. I've downloaded all drivers manually from the hp site and these are still there. I can provide harware IDs for them when I get home. So does anyone have any suggestions? I cannot use driver discs because I do not have the originals. Does this sound like a motherboard issue or driver issue? These hp DV models are notorious for motherboard issues so I would not doubt it. Let me know what you guys think.

-Nick

A:hp driver issues or hardware issue

Also, I put a hard drive from a dv6000 model in it that had vista home premium 32 bit and installed all necessary drivers but had the same problems as I do with the win 7 OS

2 more replies
Answer Match 41.58%

Hello all,

I've previewed quite a few threads here, seeing if there's anyone with problems like mine, of course there are and so I'm hoping I can find help. I'm going through the "Please Read Before Posting!" sticky so that we can all be as helpful to each other as possible.

MOBO: Asus A8N-E Nvidia NForce 4 Chipset
CPU: AMD Athlon 64 X2 Dual Core 4400
2 GB RAM
300 GB Maxtor Drive (SATA capable but not enabled)
150 GB IDE
GPU: GeForce 7800

OS: Windows XP Professional 2002 - SP3
Anti-Virus: AVG V9.0
No Firewall - not Nvidia's not Window's, none they bug me :P - oops

I'm trying to remember the time line and sequence of occurrences but it's hard because I've had problems with Firefox and AVG that were resulting in navigation and page/video viewing problems as well as periodic BSOD, and I think my hard drive (300GB Maxtor) may be failing because it only shows half the storage space it should... I also think my GPU fan isn't working 100% because it makes a bad buzzing sound, but my temps look okay, though I don't know if I can view my GPU temps...

SO!

Recently, I started having problems when I close or even sometimes just "change modes" in programs (Firefox - switch from tab to tab, Videogames - go from in-game to main menu). They will hang and freeze, sometimes I'll get a loud solid beep from my MOBO like it's overheating, sometimes (usually) I'll get a BSOD or just have to do a hard restart. At any rate, it's rendered my comp pretty m... Read more

A:[SOLVED] MBR Rootkit? Driver? Hardware?

Sorry, I just realized I probably posted this in the wrong forum... should I repost or will it be moved...?

6 more replies
Answer Match 41.58%

I need some help with a Vista Home Prem install.

I did a "clean install" from XP Home using Upgrade media. The first install series went bad during a Windows Update reboot when I let it update several "recommended" updates at once. End result a new clean install.

Second install went much better and system was working well for a couple of days. I normally leave the machine running but due to wx in the area, chose to shut down last night. On restart when I arrive at the desktop I get an immediate notification that Windows has found new "Unknown" hardware and wants to install drivers. It offers me the usual options for finding the drivers or ignoring the problem for now. When I attempt to select an option, I find that the cursor is frozen and nothing seems to resolve that.

I've tried a Start Up repair...no problems found. I've tried a couple of system restores to different (known functional) prior dates but after the restore and subsequent reboot, the problem reappears. Tried a Safe Mode boot...same thing. I was using a Logitech bluetooth USB mouse/keyboard, so I replaced that with a PS2 setup...same result. I have disconnected all cables other than the monitor and keyboard/mouse...same thing. I'd provide error logs if I could get to them, but that seems impossible (at my "enthusiast" skill level)

System is a DFI LanParty UT NF590SLI M2R/G, 4 (4x1) gig Corsair PC6400 C4, AMD Athlon X2 5000, GeForce 8600GTS, 750w PS, Gateway 24"... Read more

More replies
Answer Match 41.58%

I downloaded a driver for my Epson C82 printer. I burned the zip file to a CD so that I could install the printer on another computer. How do I get the drivers installed. I burned the driver to a CD because I lost the installation CD.

Next question: I have two onboard USB ports on the computer that are not working. I suspect the ports because the same USB devices work on another computer. For instance: memory sticks, USB mouse.

Next question: The same computer in questions "reads" some floppies and not others.

Thanks for your help.

Sylvia

I am running Window XP Professional on the computers that I am using.
 

A:Driver Installation and Other Hardware Issues

For the printer you need to copy the zip file from the cd to the hard drive on the system on which you wish to install the printer. Put it in its own folder. Then you need to unzip the file. When it's time to install the driver for the printer point windows to that location.

Did the USB ports ever work? Is this a brand system or did someone build it and not hook up the ports? Check in Device Manager for any problems with the USB controllers.

That's the nature of floppies and floppy drives. There are floppy drive cleaners. It might help it might not.
 

2 more replies
Answer Match 41.58%

For my computer, I have an Acer Aspire 5733z model. And I would like to know on how to install a driver to make it compatible with my computer hardware. Like my motherboard for example. My laptop has an HM55 chipset, and 4 GB of memory. I found an interesting article about how to hack a driver to support the hardware on the computer. If I find the article, I will let you know. But for now, that's about all I have to say. But anyway, just let me know on how to hack some of my drivers. So thank you very much for your time!

A:I would like to know on how to hack a driver to support my hardware

Not recommended! it could cause a lot of issues with your system cause conflict with other drivers, and BOSD'S. Go to the manufacture of your computer and look for a compatible drivers for your chipset, or the manufacture of your motherboard and download and install the chipset drivers for Windows 7 64bit. I believe hacking drivers is not possible also it is ill advised your system could become useless, and unusable. Why could you want a hacked and unstable drivers for your chipset when the manufacture of your laptop has a compatible drivers for laptop as a whole chipset, video, audio plus more for Windows 7?

Chipset drivers for your laptop Download and install.

We do not condone to hacking here at TSF!

2 more replies
Answer Match 41.58%

Briefly, any attempts to reinstall network adapter driver for onboard component and also for the just-bought-and-installed in PCI-E slot network adapter results in the message: Cannot install drivers. No Intel(R) Adapters are present in this computer.
Details (lots):
Hardware: Acer Aspire M5811 with Win7 Home Premium 64bit Motherboard is a Foxconn P55M01 with onboard Intel(R) 82578DC Gigabit Network Connection
Driver it had at the time it stopped working was 11.2.19.0
Basically the family member who owns this PC stated the network stopped working mid task. (Yes, it was a safe site, they are not that type) Couple of hours on the phone with the internet provider ended with a "The problem is at your end, nothing we can do..." spiel. Understandable once I had the PC delivered to me and went into the device manager to see a row of yellow triangles for every network component.
Rebooted into safe mode with networking. Ran Norton Internet Security. Ran Malwarebytes. Nothing. No internet. Green and orange lights at network port. OK I think. Lets reinstall the drivers. Go to Acer website. Get drivers. Will not install. Says it cannot find any network device. Restart PC and go into BIOS. Onboard LAN is enabled there. Get newer driver from Intel website (nice to have 2 PCs) and same thing.
Fine, enough mucking around. Empty PCI-E 1x slot just begging for a network card. Go buy the Intel(R) Gigabit CT Desktop Adapter. Follow the proper grounding / powered dow... Read more

A:Device driver installation will not see the hardware

Do you have sign inside Device Manager ? Under Network

9 more replies
Answer Match 41.58%

I was looking at my system logs today and found an error that is being repeated quite a lot and I would like to get rid of the darned error.

The error in the applications event loge is TrueVector Service, event 5003. The message in the event says:

TrueVector driver: Driver install or load failure: LoadNTDeviceDriver. Win32 error: The system cannot find the file specified.

I checked on the Internet and have found numerous resources indicating that TrueVector is a part of zone alarm. The weird part is that I have never had zone alarm or any other firewall installed -- Note even Microsft's within XP SP2. I have no references to Zone Alarm in my registry. My references to TrueVetor are in My Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application\TrueVector Service

Can someone suggest any soluton to getting rid of this event?
 

A:Solved: TrueVector driver: Driver install or load failure

13 more replies
Answer Match 41.58%

Hello))

I need help..please ))
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..

advice please..??

A:Window 7 64 bit cannot install driver sotware(canon printer driver)

Hi did you try a system restore to a point when it did work.

2 more replies
Answer Match 41.58%

i recently purchased a Kindle Fire HD 7" (tablet), and i have 2 PCs running Win 7 Ultimate x64 w/SP1...on the one PC, when i connected the Kindle via USB, Windows recognized the Kindle as a USB mass storage device as it should , installed the drivers, and i was able to access the Kindle via Windows Explorer to transfer media

but on the second PC, when i connected the Kindle via USB, Windows recognized a new device, but the driver install FAILED, and i got an error message stating "MTP" Driver could not be installed...i tried this several times, and always the failed driver install....i even did a fresh install of Win7 x64 on to a brand new HDD, and i got the same error again ...so obviously the Kindle does not show up in Windows Explorer, and i can't transfer anything to/from it

in Device Manager, under "Other Devices", i have "MTP" listed with the yellow triangle...i have tried letting Windows update the driver, but it always comes back with unable to locate a driver

i've contacted Amazon, but they're clueless, and believe it's a Windows issue...i've searched everywhere online, and it seems i shouldn't need any special drivers with Win7, and that Win 7 should install the device automatically as a "mass storage device"...and as i mentioned, on one of my PCs, the install worked fine, it's the second PC that is driving me nuts

what can possibly be the problem?

A:Kindle Fire HD - Win 7 Driver Install Fails - MTP Driver Error

Have you used other usb devices on this computer? like pendrives datacards etc. see if they work fine or not.

3 more replies
Answer Match 41.16%

Hello Seven Forums. I have been having many problems with my custom built desktop regarding Blue Screen of Deaths. I have been on these forums before with this problem but I was unable to resolve the problem.

The problem is, my computer tends to BSOD when I either start up or shut down but also does it in between after minutes to hours of use. 90% of the time, the message that comes up in my BSOD is "Memory_Management". I have run a memory test using memtest86 but even after 5 passes, no problem was detected. I even bought a brand new 1 TB hard drive and that was not the problem. The odd thing is, when I run a Windows memory test, it states that there are hardware problems but does not describe what it is.

So basically, it seems the problems could be either, my RAM, drivers, or an unknown hardware problem.

Help pinpointing the problem and some tips on resolving it would be amazing. Thank you very much Seven community. You have helped me before and hopefully you will find the kindness to help me for the last time.

A:Constant BSOD, no virus, most likely driver, or hardware. Need help.

  
Quote: Originally Posted by Bonto


Hello Seven Forums. I have been having many problems with my custom built desktop regarding Blue Screen of Deaths. I have been on these forums before with this problem but I was unable to resolve the problem.

The problem is, my computer tends to BSOD when I either start up or shut down but also does it in between after minutes to hours of use. 90% of the time, the message that comes up in my BSOD is "Memory_Management". I have run a memory test using memtest86 but even after 5 passes, no problem was detected. I even bought a brand new 1 TB hard drive and that was not the problem. The odd thing is, when I run a Windows memory test, it states that there are hardware problems but does not describe what it is.

So basically, it seems the problems could be either, my RAM, drivers, or an unknown hardware problem.

Help pinpointing the problem and some tips on resolving it would be amazing. Thank you very much Seven community. You have helped me before and hopefully you will find the kindness to help me for the last time.



In an effort to save time and because they are all similar I ran the most current crashes. There are at least 4 different causes.
1-Memory corruption-- I know you have run memtest but you may need run the memory one stick at a time, and the mobo slots one at a time as well
2-Your video driver. You need to remove all traces of your current driver before downloading a new... Read more

7 more replies
Answer Match 41.16%

Hi Experts,

I have been investigating for a while now and I'm still stuck with no explanation.

I just bought a new desktop choosing every component and I have BSOD coming randomly, most frequently during video games / video editing. Sometimes i don't even get a blue screen but a freeze and i have to reset the machine.

I was suspecting hardware issue but the following tests ran without issues:

memtest at boot (overnight for each memory module). Currently i'm running with only 2x8Go modules out of 4 because 2 of them show some errors
seatool for HD check
furmark for GPU check - temperature stable after about 10min run (78 degrees)
prime95 for CPU - no error and temperature stable using speedfan after running for about 10min (67 degrees)

my config is:
biostar z87 3d
i7 4770k (3.5Ghz)
16Go corsaire vengeance (originally it was 32)
gigabyte 780 gtx
ssd 250 samsumg
wd 1To 7200rpm
tp-link wifi network card tp-link
running under windows 7 ultimate

Appreciate any feedback to narrow down where the issue could be coming from !

Please find the zip with data collected (I left only the most recent dumps)

thank you !
Ludo

A:BSOD with different reasons: hardware of driver issue ?

You've built yourself a pretty nice system. I must say, I'm a little jealous.

Your blue screens are all over the place, but they all show memory related operations. That isn't to say they're caused by the physical RAM in your system though because there are a lot of components that are involved when memory is accessed, from where it's accessed, if it's cached, etc.

Without consistent crashes it's going to be rather difficult making a determination via crash dump analysis. What I can say that I'm fairly certain of is it's not driver related. It does indeed appear to be caused by hardware.

To be honest, I'm not really up on Biostar. I've never used their boards. I stick pretty much to the enthusiast class of Asus boards.

The Intel process and Corsair memory are top notch. I'm surprised you had issues with 2 modules of memory since Corsair is some of the best on the market. The only thing I would suggest is that you buy your memory in dual sets (16GBx2). Many motherboards (I mean A LOT) don't jive well with quad sets.

The Samsung SSD is top of the line (as long as it's the 840 Pro model).

Gigabyte is well known. I've not had any of their graphics cards but I've read good things about them. I personally use EVGA.

One thing you didn't include is your power supply. Many people overlook this component when building a machine. But IMO, it's one of the most important components to invest in. Can you provide some details on the PSU?

So, with all that said, next steps?... Read more

6 more replies
Answer Match 41.16%

Hi everyone,

Yesterday I started getting a weird problem with my screen, the entire screen has a red colored overlay/tint and I have no idea what the issue might be. I use dual monitors and it will only happen on one monitor, switching the cables around doesn't help but if I switch the cables around it will change monitor (it only affects the monitor that is set as main).

Here's what it looks like: http://i.imgur.com/jb9pg.jpg

The OS is Windows 7 64-bit and the graphics card is Nvidia GeForce 9800 GX2

Also one thing to note, last night I switched the cables around for a while to test different things and it ended up without any problems for a few hours, but later on it returned.

Anyone know how I can troubleshoot this further or have seen this issue before?

Thanks a lot!

A:Red Tint on the screen, driver or hardware issue?

Hi swirishninja and Welcome to TSF,

This issue is most likely hardware related. The main cause would be that either a PIN on the vga/dvi connector has been bent/broke, or one of the female-connectors on the graphic card is broke.

Could you please confirm this and see if it's any of the two connections on your graphic card that this seems to be related to? It should only be from one of them, or from one of the monitors nomatter the switch, if you know what I mean.

8 more replies
Answer Match 41.16%

Today I had decided to uninstall my current AMD Catalyst driver, which was the 14.4 Release Candidate driver, and I looked up a guide on how to do it. I found a result for using the AMD Uninstall Utility to remove the graphics driver, and although that seemed to have worked fine, it also uninstalled every single driver I had, most importantly all USB drivers. Guess what that means? I can't use my mouse or keyboard (or any USB device for that matter)! So, for the last 3 hours or so, I've been switching USB ports, I've been rebooting my PC, trying to access HP's stock Recovery or BIOS, but mashing F8, F10, Escape, Delete or any other possible key on startup didn't help at all. So, now I'm stuck here writing about this because a few Google searches or asking a few friends didn't work (in fact one friend even referred me to this forum). Also, I typed this all from my tablet which has a detachable keyboard, in case you thought "how the hell is he doing this without a keyboard?".

Incase you wanted to know anything spec wise, you could check here:
http://www.bestbuy.com/site/pavilion-desktop-amd-a8-series-8gb-memory-2tb-hard-drive/3199341.p?id=1219088675337&skuId=3199341&st=categoryid$pcmcat212600050008&cp=1&lp=2

I haven't modified the hardware at all, so this should be good enough (sorry I can't recall specs :|).

A:I just happened to uninstall every single hardware driver.

Did you try F11(System Recovery)?

Dumb question, I know!
Wouldn't happen to be a touch screen?
(now I'm grasping...)

16 more replies
Answer Match 41.16%

Hi:

I can't install the drivers for following; the Multimedia Audio Controll, Sm Bus Drivers and Video Controller.

Instead of saying no that I don't want to connect to the internet to find the drivers I said yes and the hardware wizard can't find the drivers because I assume that they aren't on the internet. The problem is that I can't get the hardware wizard back to stage one when it asks those three questions;

1. yes, connect only this time,
2. yes, connect whenever I want to install drivers
3. no, not at this time(which is the one according to a website that I found is the one I should have clicked).

Is there a way to reset things so that I get asked the questions again?

A:New Hardware Wizard Driver Installation Issues

Hi lapetite66 -Is this problem due to a reinstall of XP, or are you trying to add extra Audio Controll ?If this is a new product / program, is it downloaded from the internet or loaded from a CD ?Thank You -

12 more replies
Answer Match 41.16%

I have been working with tetonbob in the hijack this forum and he suggested I may need to go here to try to resolve some issues. The link to the thread is at:
http://www.techsupportforum.com//sec...ease-help.html

Problem started few days ago when son installed some program called snoopfree (something or other) that he had seen in a post by another tech support person on here in the hijack forum. After install, desktop would not load so he went in safe mode and uninstalled it, but since then PC has been very slow to load (sometimes 10 minutes) and after running for a time it crashes.

Following is a copy of what the screen said on one occassion:

Upon rebooting, the first screen that came up said something I have never seen before: "Loading PBR for descriptor 2 .... Done."

Then when the welcome screen came up, i logged in and it took 5 minutes before it started to go to the desktop, but instead it popped a box up that said:

(in the blue header)
SAS Window: winlogon.exe - aaplication error

(in the white portion below)
The instruction at "0x77de788e" referenced memory at "0x012a80000". The requested dataas not placed into memory because of an I/O error status of "0xc000009c".

Then it said to either click on ok to terminate the program or click on cancel to debug the program. I clicked on cancel and then a blue screen loaded and it said this:

Stop: c0000z1a Do not remove or your scheduled tasks will cease to func... Read more

A:Stop errors - hardware/driver issue ?

Sounds as if some of your files got pooched. Do a Repair Install

http://www.microsoft.com/windowsxp/u...ps/doug92.mspx

Configure your computer to start from the CD-ROM drive. Then insert your Windows XP Setup CD, and restart your computer.

1.When the Press any key to boot from CD message is displayed on your screen, press a key to start your computer from the Windows XP CD.

2.Press ENTER when you see the message To setup Windows XP now, and then press ENTER displayed on the Welcome to Setup screen.

3.Do not choose the option to press R to use the Recovery Console.

4.In the Windows XP Licensing Agreement, press F8 to agree to the license agreement.

5.Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.

6.Follow the instructions on the screen to complete Setup.

If you have xp sp2 installed it needs to be incorporated into your xp disk or it will not offer the repair option only the clean install.

Slipstreaming Windows XP Service Pack 2 and Create Bootable CD

17 more replies
Answer Match 41.16%

Updated my hardware drivers including the wireless adapter, and something must have gotten changed as I can not connect to wifi anymore on HP Notebook G72-253NR with Windows 7.

Flushed winsock, released/renewed ipconfig and deleted/reinstalled adapter. Can meanwhile connect thru Ethernet cable again but not wifi. Finds my wifi network (previously didn't) but can't connect, don't have tcp/ip addresses in LAC or wireless properties, automatically obtain is enabled. IPv4/6 enabled in both also.

Getting message of "HOST Process was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/Services/VSDATANT? at initial startup.

"COM surrogate was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/services/vsdatant" whenever I simply access/exit ip protocol settings.

How can I fix this? My brain is fried after several DAYS of trying to fix my friends computer... Please someone help!
 

A:Can't connect to wifi after hardware driver update

Call your ISP they will walk you through it.
 

2 more replies
Answer Match 41.16%

Since XP support is going away And I have some older devices such as

VBOX 3560 tuner
ATI PCI HDTV Wonder card

Which are listed as xp drivers, although windows 7 updates finds and installs them and they work good.

WILL those drivers still be available on windows update?
I simply put device into PC, then run windows update in control panel. Win 7 update finds the XP drivers and installs them. It will not tell you they are XP drivers.

I have downloaded some drivers off windows update catalog.
Is that something everyone should do? Update all XP device drivers beofre XP support is gone?

A:Driver updates for old hardware that are made for XP but work on 7

I suppose for my vbox 3560 wont be a problem since they show win 7 and win 8 and win 8.1 drivers for it.

1 more replies
Answer Match 41.16%

Acer Aspire 9804WKMi (9800 series) Model LA01
CPU - Genuine Intel (R) CPU T2500 @ 2.00 GHz
IDE0 - HTS541080G9SA00 - (S1)
IDE1 - HTS541080G9SA00 - (S3)
IDE2 - MATSHIADVD-Ram UJ-845S
Display - NVIDIA GeForce Go 7600 PCI Express 256Mb GDDR2 VRAM
Memory - two 1Gb Nanya sticks (never heard of them before)

Link (it will not take you to exact but I can not get it to copy exact)
http://www.acer.ca/acer/service.do?...tryISOCtxParam=CA&ctx1.att21k=1&CRC=719687231
Then select Notebook, then select Aspire then scroll down to 9800 (note you must also change OS from Vista (default) to XP
(Temperature not an issue because a reboot will return me to "Setup will Restart" on numerous occasions and run through to same spot - read long explaination attached)

Immediate Issue - Unable to install BIOS\Chipset\VGA drivers without Windows running, and Windows will not complete setup repair - thus is not running.

This is a very short discription of the issue. PLEASE read the full explaination attached.as word doc.
Thanks in advance
A very perplexed
Jerry
 

A:Hardware/Driver issue (I think) Acer Laptop

bump please
 

3 more replies
Answer Match 41.16%

Sorry if this is in the wrong place, I didn't know where else to post this. Please move if needed.

I recently uninstalled the Free AVG 2011 due to performance issues. After the uninstall every time I Restart my computer, Found New Hardware Wizard pops up telling me to Install AVG Miniport Driver #7. I click the "use internet to find updates" or whatever it says, then it can't find anything with that name. I tried the avgremover.exe (name?) from the AVG website. Still pops up every time i start up. Am I just gonna have to suffer through this every time. Or is there something I can get rid of or change in the Registry?
thanks
 

A:Fonud New Hardware error. AVG Miniport Driver #7

Try the remover in Safe Mode.
 

1 more replies
Answer Match 41.16%

My netbook all of the sudden stopped connecting to the internet, after trying the network it would say that it could not connect. I restarted and now no networks appeared. I ran Windows Network Diagnostis and it found this problem: "The Realtek RTL8723BE 802.11 b/g/n Wi-Fi Adapter adapter is experiencing driver- or hardware- related problems Not Fixed" I did some research and downloaded and installed a new driver from this link: http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_147415_1  The network names came back, but when I tried to connect I again was told I could not connect. I restarted and the networks no longer appeared and Windows Network Diagnostics gave me the same error it had before.

A:Realtek Adapter Driver or Hardware Problems

Hello @Plumb1?, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I read your post about the WiFi issue, and wanted to assist you! To start, can you provide me with the Product Number of the notebook?  Here is a link you can use that will help you find your Model and Product Number: How Do I Find My Model Number or Product Number? In the meantime, please review the following document, and let me know how it goes:HP PCs - Troubleshooting Wireless Network and Internet (Windows 8) Please let me know if this information was helpful by clicking the thumbs up below.  If this post resolved your issue, then please click on Accept as Solution. Regards!

2 more replies
Answer Match 41.16%

Happened about 20 seconds after logging in, no idea why, maybe it was something i downloaded? Ive run malwarebytes, MSSE, all clear

can someone help identify the problem?

Thanks in advance, you guys are lifesavers!

A:BSOD After bootup. No new hardware - Driver issue?

What about the network adapter issue? You did not responded there. I think you should have marked that one as solved before starting a new discussion.
Seemingly random BSOD - PFN list corrupt

This time it is a display issue. And the display driver is the latest, 340.52 WHQL.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Take the 15 minutes benchmark test.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Let us know the results.
_______________________________________

Code:
BugCheck 116, {fffffa800b6b3010, fffff8800f5c193c, 0, 2}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+15393c )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

9 more replies
Answer Match 41.16%

I'm in the process of building an HTPC and keep have what appears to be a hardware or driver problem. The PC keeps rebooting or goes into a blue screen and locks up after some period of use. Does anyone know any software I can get that will track and log the problem when it occurs so I can try to narrow the problem down? Thanx!
 

A:Hardware/driver error tracking software

I have attached some Everst reports of my system prior to a crash. If any of you can make sense of the data and spot something I should look into, please reply. By the way I have never been able to get my CPU bus spped up to the 166 like it should run, I suspect there's a link there. Also should the negative voltages in the sensor report be that high?

Again thanx in advance for any help you can provide!
 

1 more replies
Answer Match 41.16%

hey guys, i'm just doing a re-install of the sound driver and i'm using the exact same CD that worked earlier and now when i go to install it says 'Hardware not found'. is there any way i can make it work? i have no sound right now.

thanks
 

A:Creative Sound driver says hardware can't be found?

What windows version do you have ?
sounds like you may have a hardware issue, if the driver cannot find the hardware to install
Whats the make and model of the PC
when it boots up - do you get any error messages

post back here

------------------------------------------------------------------------
{Device Manager}
Post back the results in device manager
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
windows 7
start > control panel> System and Security> Device Manager

post a screen shot of the device manager

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here
------------------------------------------------------------------------
 

3 more replies
Answer Match 41.16%

Hey guys, I'm having problems with my month old Qosmio X505-Q830.

Specs:
Intel i7-720QM
4GB DDR3 1066
Windows 7 Home Premium 64 bit
GeForce GTS 250M - running 187.23 (I tried the new ones, but have since uninstalled/safe mode/driver sweeper/reinstalled stock ones provided by toshiba)
DirectX 11

Okay, so I've been getting these pesky BSOD's for a few weeks now. (Practically since I got the thing out of the box, I think it ran okay for a week or two before this started happening)
The stop error is 7C and it lists nvlddmkm.sys as the problem file. (I've looked at a couple of the stop errors as well as looked at the minidumps with windbg, all the stop errors are pointing at this file)

This happens while I'm playing games, this happens when I have it idling overnight, pretty much whenever it feels like it as far as I can tell.

So far, I have made sure to run windows update, I tried installing the latest nvidia drivers from their site (since toshiba only has the 187.23 that I listed above) that didn't fix the problem so I reset it to the older version by uninstalling the Nvidia display driver from the control panel. Restarting in safe mode and removing nvidia display drivers with driver sweeper, restarting and reinstalling the driver.

I have consulted every single forum I can find, and the following solutions I have found:

1. When Vista came out, apparently there was a similar issue. The issue was solved by waiting for nvidia to come out with a... Read more

A:GTS250M - BSOD - Hardware Failure or Bad Driver?

bump
 

2 more replies
Answer Match 41.16%

? Windows 8.1
? x64
? The original version is the current version.
? The OS is a retail version.
? Varies, power supply is new, as is one of the gfx-cards, but the rest is between 2-4 years old.
? About 10 days.
? I have reinstalled Windows.
? Intel I7 2700K (Sandy Bridge)
? MSI GTX 780 Gaming 3GB (1x)
? Asus P8Z86-V Pro/Gen3
? Cooler Master V-1000
? Self-built
? -
? Desktop

Some history:
Been using this system for about 2 years without problems.
A month ago, I installed a 2nd GTX780 to run in SLI. Back then, I used a 4 year old Corsair HX750W power supply.
I knew about the possibility of the power supply not being sufficient, so I bought a Cooler Master 850W power supply from a private induvidual.
Long story short, that turned out to be a scam so instead of waiting for a new power supply to arrive, I decided to try with my old power supply.
In the end, after a few weeks and alot of unexplained BSODs and a couple of reinstallations of Windows, it turned unstable and delivered a power surge (which my motherboard told me it protected my computer from).
At this time, I bought a new power supply and installed into the system (which i thought would solve all my BSODs).
But it didn't and futhermore, the BSODs are now present even on my old setup (without the GTX SLI).

My current situation:

Hardware:
? CPU runs hot when stressed (gets up to 87 degrees celsius) but I've run prime95 (small FFTs) without errors.
? Memtest86 for 5 hours without errors.
? A prim... Read more

More replies
Answer Match 41.16%

I am using windows professional, I downloaded everest to try and figure out if there was something wrong with my sound card since there looks to be no audio devices. But my altec lansing 2100 setup does not work and have no other speakers to try. Any help would be appreciated either post here or email me at [email protected]
 

More replies
Answer Match 41.16%

hiafter  a new installation of windows professional 7 64 bit, i am receiving "you dont have the compatable vga hardware or driver to run you cam" i tried to donwload all the drivers but without success!thnaks for help

More replies