Tech Problem Aggregator

Notebook HP touchsmart tm2-2050ep error driver touchsmart

Q: Notebook HP touchsmart tm2-2050ep error driver touchsmart

Hello, I am Portuguese and I have a driver problem with my computer.
Computer Information (HP):

Model: Notebook PC HP TouchSmart tm2-2050e
Operating System: Windows 7 64bit (service pack 1)
Version bios: f.25
antivirus: avast free
Maintenance: ccleaner and Advanced SystemCare Pro
Update drivers: ma-config and SlimDrivers









The problem is as follows:

The hard drive was in trouble, so it was replaced.

Then I put the windows 7 again.

And there was no problem, until the driver (s) touch (touchsmart) does not work.







I've done:

I tested it with my finger and pen hit the computer screen.

I went to HP's download page all available drivers for my computer, did not work.

Update drivers with the program ma-config and SlimDrivers not resulted.









Link all the information from my computer:
Configura??o Resumo

Link information about my dxdiag (hosted on google docs / drive):
https://docs.google.com/file/d/0B1iZ...it?usp=sharing


Sorry about the spelling mistakes.

And please, help me.

Thank you.

A: Notebook HP touchsmart tm2-2050ep error driver touchsmart

Hi there .... I understand your touch screen is not working .... Is the touch-pad working though ? Is there any errors in the Device manager ? .... Which Drivers did you download from the HP web site ? .... Did you download Drivers from any where else ? ... Also where you able to get Windows activated ?

9 more replies
Answer Match 95.76%

The hinge on my much-loved Notebook has become 'loose'. Can I find repair help locally? Baltimore,  MD area. What is the correct term(s) to use to describe the problem? 

A:TouchSmart Notebook TV notebook swivel hinge repair?

https://www.google.co.in/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=hp%20service%20center... You can tell them that the hinges are loose 




Regards;SmileyI am an HP employeePlease click the White Kudos star to say thanks for helping.Please mark Accept As Solution if my help has solved your problem.

1 more replies
Answer Match 93.66%

How to take a screenshot using Hp TouchSmart Tm2 notebook PC

More replies
Answer Match 93.66%

How can i make my  HP Pavilion 10 TOUCHSMART 10-e010nr notebook/pc run faster. I have 2 gb of ram  320 gig harddrive. can i addmore ram.

More replies
Answer Match 93.66%

How to take a screenshot using Hp TouchSmart Tm2 notebook PC

More replies
Answer Match 92.82%

Hi,

I've included all the files you have asked for to diagnose the problem.

The laptop had Windows 7 Home, but then I upgraded to Windows 7 Ultimate (x64) three days ago (through Windows Anytime Upgrade) thinking it would eliminate the BsOD. It hasn't. This began happening recently, but now it happens frequently. I have not installed any new programs when this problem began. My version of Windows Ultimate is a full retail version I purchased.

I purchased this laptop from my brother, but it shouldn't be more than a year old.

Thank you for your help,
Myers

A:BSoD HP Touchsmart tm2-1079cl notebook

  
Quote: Originally Posted by vmhatup


Hi,

I've included all the files you have asked for to diagnose the problem.

The laptop had Windows 7 Home, but then I upgraded to Windows 7 Ultimate (x64) three days ago (through Windows Anytime Upgrade) thinking it would eliminate the BsOD. It hasn't. This began happening recently, but now it happens frequently. I have not installed any new programs when this problem began. My version of Windows Ultimate is a full retail version I purchased.

I purchased this laptop from my brother, but it shouldn't be more than a year old.

Thank you for your help,
Myers



You have three glaring problems

Your Avast , old drivers, and Zone Alarm (NETIO.sys).
I would remove avast and replace with Microsoft security essentials and the win 7 firewall. Remove Zone alarm.

The most recent crash was probably caused by an interaction between ZAP and Avast.

http://files.avast.com/files/eng/aswclear5.exe

http://www.microsoft.com/security_essentials/

http://download.zonealarm.com/bin/fr...cpes_clean.exe


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\021011-30825-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/sym... Read more

1 more replies
Answer Match 92.82%

I bought a SSD for my laptop but my laptop is not recognizing the SSD. The model is the SSD KINGSTON SV300S3N7A / 240G . What should I do?  My notebook is compatible with SSD? 

More replies
Answer Match 92.82%

Fairly new system, been bluescreening occasionally since I've had it. Finally fed up and looking for some help. HP Support has not been too helpful to this point.

Windows 7 64bit OEM

Thanks for any help and/or suggestions.

A:TouchSmart tm2-1079cl Notebook BSOD

I don't see any minidump file in the one you just post. Please go to C:Window and make sure that the minidump folder is there with .dmp file in it. You might want to check if you have set system to create minidump file.





Quote:
Windows 7:
Go to Start and type in "sysdm.cpl" (without the quotes) and press Enter
Click on the Advanced tab
Click on the Startup and Recovery Settings button
Ensure that "Automatically restart" is unchecked
Under the Write Debugging Information header select "Small memory dump (64 kB)" in the dropdown box
Ensure that the Small Dump Directory is listed as "%systemroot%\Minidump" (without the quotes)
Click OK twice to exit the dialogs, then reboot for the changes to take effect.


Are you using any program such as CCleaner..? Are you sure it is BSODs?

3 more replies
Answer Match 92.82%

I am trying to do an assignment for spanish that requires me to record my voice. How do I do this on my computer?

More replies
Answer Match 92.82%

http://support.hp.com/us-en/document/c04677832 thats a link to everything about my specs on my laptop I struggle to find out what can I upgrade and what can i not upgrade? If I can upgrade what can I upgrade to? Things like RAM,CPU,Memory or SSD, GPU...etc. Ty if you can help, im open to any suggestions

More replies
Answer Match 92.82%

Looking for a digital pen / stylus which will work with an HP ENVY TouchSmart 15-j067cl Notebook PC.  

More replies
Answer Match 91.98%

how do I disable the  touchpad on hp envy touchsmart m7 notebook pc

A:how to disable touchpad on hp envy touchsmart m7 notebook pc

You can disable the touchpad using the steps in this document: Using and Troubleshooting the TouchPad (Windows 8) (see "Disable the TouchPad" section)

9 more replies
Answer Match 91.98%

Windows updated about a week ago and when doing so, deleted hidusb.sys out of my registry. Windows does not have a system restore point that is before the update point. Because of this problem, I cannot use any of the tablet settings. The pen and finger screen input devices to not work now. How can I find and put the file back into system32?

All and any help is greatly appreciated.

A:I need to find hidusb.sys for HP touchsmart tm2t notebook pc.

Hi evancm57, welcome to the forums, You should be able to extract the file off the win7 installation disc , As to why win update would delete the file I do not know seems very strange

2 more replies
Answer Match 91.98%

I cannot remember my password to my hp pavilion touchsmart 15 notebook pc. How do i get to unlock or reset. It did not come with any cd's

A:How to reset bios on hp pavilion touchsmart 15 notebook pc

If you are referring to a BIOS power on password-entering the wrong one 3 times should give you a halt code. Post that code here.

5 more replies
Answer Match 91.98%

I'm not able to find the bluetooth setting in my laptop, please help! 

A:Can't find Bluetooth in HP Pavilion TouchSmart Notebook

Hi, Your macine pnly has Realtek RTL8188EE 802.11bg/n 1x1 WiFi adapter, it does NOT have Bluetooth:       http://partsurfer.hp.com/Search.aspx?SearchText=F5W51UA    (Please keep or bookmark above link for future references). Option: you can use an adapter which is similar to      http://www.officeworks.com.au/shop/officeworks/p/targus-bluetooth-4-0-usb-adaptor-taacb75au Regards.  

1 more replies
Answer Match 91.98%

Hi there- Can you please help me?  I am locked out of my HP Pavilion Touchsmart 11 notebook.  Incorrectly entered the admin/power on password 3x & generated "System Disabled" code 72309540.  Can you please give me instructions to get in/reset? Thank you!!Krissy










Solved!
View Solution.

A:Need BIOS password reset on HP Touchsmart 11 notebook

Try this: 75685469

10 more replies
Answer Match 91.98%

 i am trying to reset my bios passwordHello my disabled code is 65184951 please help methanks .. mike











Solved!
View Solution.

A:Need BIOS password reset on HP Touchsmart 11 notebook

@mamanf99? Enter   70882397 Regards, DP-K

3 more replies
Answer Match 91.98%

i Was working with SPSS 20.0 when i had to stepout for a short meeting. My Hp 15-d020dx notebook (Energy star) battery went completely dead after I returned. i tried to charge it after some time. The battery was charging normally with battery light just by the AC adapter port working on. i tried to start the computer while the battery was charging. the computer won't start. i tried serveral times and it is till stone cold. however, when i press the power button, the power light just by the hard disk light on the right side of the computer comes on for some seconds but goes off again. i tried the hard resert by removing the batter and it still can't come on. mean while the computer has power supply and now the battery is fully charged. can anybody help, i begTHANK YOU

More replies
Answer Match 90.72%

Dear Sir/Madam working in HP, I have bought the ENVY TouchSmart 15 notebook in 2014 and now I know it is out of the warranty. However, I never dropped it and now the hinges show defects and it cracked the case of the notebook.Here I would like to know the place and the timing for fixation. Thank you and best regards.











Solved!
View Solution.

A:HP ENVY TouchSmart 15-j006tx Notebook PC Hinges defect

@Charmander

  I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details). If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Thank you for visiting the HP Support Forum.

3 more replies
Answer Match 90.72%

i have a HP Envy Notebook 17-j017cl TouchSmart i want Upgrades ((HDD HARD DRIVE SATA 750GB)) to ((SSD HARD DRIVE SATA) how many type  %100 compatible with my model ?











Solved!
View Solution.

A:HP Envy Notebook 17-j017cl TouchSmart Compatible SSD Upgrade...

Hello! All 2.5 inch SSDs should fit your laptop if you are replacing just the 750GB unit. You may need to use a special adaptor to secure the SSD depending on what thickness it is, but rest assured, most SSD manufacturers include these.

3 more replies
Answer Match 90.72%

I've had the HP ENVY TouchSmart 15-j051nr Notebook PC  for a few months and recently, within the last few days, the fan is constantly running louder than normal. I've downloaded and installed all the recent updates, including the most recent BIOS update.  This is my business laptop. Is there a solution for this? 

A:HP ENVY TouchSmart 15-j051nr Notebook PC Constant Noisy Fan

Hi Kennyk3, I understand you are having an issue with a noisy fan on your HP ENVY TouchSmart 15-j051nr. Here is a document on how to reduce the fan noise . Hope this helps. Thanks. 

5 more replies
Answer Match 90.72%

This laptop currently has a Mobile DualCore Intel Core i3-3130M, 2566 MHz processor and I am looking to upgrade it to the Intel Core i7-4702MQ 2.20 GHz processor (Spares# 723522-001). It is listed in the service manual however I am unsure as to if the System Board will support it. The System Board is the original as is the processor and what makes me unsure is that the current processor (i3) is a FCPGA988 socket and the new one (i7) is a FCPGA946. Does anybody know where I can find more information on this? Also, if it requires a MB upgrade, does anybody know which ones will work in this chassis?Any help is appreciated! Thanks! ~DT 

More replies
Answer Match 89.88%

The left Hinge is pulling the upper portion of my wife's computer off , as the very heavy touchscreen applied too much torque to the notebook case . I have read in the forums that is is a very common issue with this model. My il-laws bought the same computer for my wife and her brother, and the same thing has happened to both computers. Is there any way this can be fixed? I have seen in the forums than many other people have this same problem, but I have not seen anyone post anything about any solutions to it. Any assistance or advice would be appreciated. 

A:HP Envy Touchsmart Notebook M7 J010 Left Hinge problem

As you said this is a common problem with HP Envy's. I pulled apart my laptop to replace the fan in it and having the same problem as you j decided to take a look at it. What it was was a broken Skrew Hole (Sorry I'm having a mind blank) but where the skrew connects to the motherboard has been broken. This is a small peice of plastic. There is no real way of fixing this however there is actually a skrew right beside that one. Apart from when your moving the screen and the look of it, it woint damage your computer and nothing will come falling off it e.g screen, surround. I'm sorry but that's all the information/advice I can offer

1 more replies
Answer Match 85.68%

Hey all,

I have a HP Touchsmart 520 PC.

It has always been on Windows 7 Home Premium 64 Bit.

It was running a bit sluggish so I stuck in the Windows CD and did a fresh install.

It has now completed and it's on the setup page such as "Keyboard language", "country" e.t.c.

Problem is:

I have no drivers. My mouse is no longer working, my keyboard is no longer working and my touch screen is no longer working.

This means I cannot complete the set up and I'm stuck on that page.

I've tried a wired usb laser mouse and a wired usb keyboard, but neither are "working".

Any help would be brilliant, thanks a lot.

Keyboard and Mouse are working in startup menu e.t.c, just stops working as soon as it gets to the windows screen to set it up.

A:HP Touchsmart 520 - Driver - Fresh Install

Hi and welcome to TSF there are quite a few models https://www.google.co.uk/search?q=hp...w=1366&bih=620

4 more replies
Answer Match 85.68%

Hi,I have a trouble to find the original WiFi Card driver for the Touchsmart 520-1020it, i search in the download section of this product, and are present all driver but not the WiFi Card, and i do not find the type of the card for download directly from the manufacter page... Thanks a Lot for Help! Andre











Solved!
View Solution.

A:touchsmart 520-1020it wifi driver

Thanks for the response, i find the driver, is the ralink wifi card, and i downloaded the package from the website of the manufacturer.Problem solved! Thanks a LotAndre

10 more replies
Answer Match 84.84%

Apparently tons of users are having issues with the Intel HD Graphics 4600 driver for all sorts of devices. I'm wondering why there's always an updated driver for Nvidia when my product doesn't even have it? The 4600 driver from both here and Intel both crash, and sometimes I get multiple crashes in sequence. Is there something I'm missing?

More replies
Answer Match 84.84%

hi ive looked all day to try and fix this error i have reinstalled windows7 and all drivers but am not able to use the touch sreen  or find a drive for the touch screen anywhere any help please thanks touchsmart tm2 1070us touch screen not working cant find the drive  windows 7 32bit  thank you  http://unlimitedhostingfree.co.ukhttp://doctorsoftwares.co.uk

A:touchsmart tm2 1070us touch screen driver

Try the nextwindow software available as download from the following weblink:http://www.nextwindow.com/nextwindow_support/Windows_7_Touch_Screen_Driver.html

6 more replies
Answer Match 84.84%

After a win 8.1 update, my touch screen will no longer work and the mouse will not show any apps.

More replies
Answer Match 84%

I have an HP Envy TouchSmart 20 AiO PC, and ever since I upgraded to Windows 10, I get the "POWER STATE FAILURE" blue screen every time I try to wake it from "Sleep Mode" and it will take forever to restart after a hard reboot. I have managed this problem by changing my settings so my computer never goes into sleepmode (but turning off the screen). Obviously, this is not ideal. I have been told this would fix itself automatically via Windows Update, but it has not. Please advise. Thanks!

A:HP Envy TouchSmart 20 AiO PC- Driver Power State Failure

Hi there @tomdonington, Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that you are looking for help with a blue screen error when trying to wake from Sleep mode. I am happy to assist you with this. Please post the full product number for your computer. See the following, if you need help with that information. How Do I Find My Model Number or Product Number? Are all of the drivers for your devices up to date, assuming that there are specific Windows 10 drivers for your model? You can try using the  HP Support Assistant to help with that.HP PCs - Using HP Support Assistant (Windows 10, 8, 7)HP PCs - Troubleshooting HP Support Assistant (Windows 10, 8) Another choice, if there are not specific drivers for Windows 10, is to install your older drivers, using compatibility mode for Windows 10. How to: Install and Update drivers in Windows 10 - answers.microsoft.com Please let me know if that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

3 more replies
Answer Match 84%

For those of you running Windows 7 either 32-bit or 64-bit on an HP Touchsmart IQ775 with a GeForce Go 7600, please visit tweakforce.com - Downloads for the correct driver update.

I had an issue with an outdated driver. When Windows Update had their most up-to-date drivers installed, it installed an older version instead of the latest one.

This cleared up all of my problems and I'm sure it will help you with yours.

Just as a precaution, I'd check to see if you have this folder before updating though (just incase!)

C:\nVidia Forceware\XTreme-G 175.63 Mobile Vista 32bit
OR (depending on your bit)
C:\nVidia Forceware\XTreme-G 175.63 Mobile Vista 64bit

after installing the update you should then have...
C:\nVidia Forceware\XTreme-G 190.62m Vista Win 7 32bit
OR (depending on your bit)
C:\nVidia Forceware\XTreme-G 190.62m Vista Win 7 64bit

A:HP Touchsmart IQ775 GeForce Go 7600 Driver Update

I am looking for more windows 7 32bit drivers for my IQ775 Touchsmart PC. I need webcam and side controls drivers. Can anyone please help?

John

2 more replies
Answer Match 81.06%

I keep getting the following error message: HP My Display touchsmart OSD has stopped working.A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.  No solution has ever been provided. Can anyone tell me why this is happening and how I can stop it? Thank you

More replies
Answer Match 80.22%

At the startup error message: 90B Cooling Fan is not operating correctly.   Notebook shuts down computer in 15 sec.  I do not hear or feel fan working.  I recently upgrated to Windows 10 Anniversary update.  No other changes.Please advise the best coarse of action. Thak you

More replies
Answer Match 79.38%

Can't install Windows 8 Preview on a HP Touchsmart 600xt.

I tried a half dozen times and get the noted error code: 0x080070570 :Windows cannot install required files. The file may be corrupt or missing. Make sure all required files are available."

I downloaded the latest version of Windows 8 Preview iso file twice and burned each to a disc twice to make sure my boot disc was not corrupt.

First I tried upgrading Windows 7 x64, then tried a clean install after formatting my HD.

Help or suggestions would be appreciated.

A:Error Code: 0x080070570 when installing Win 8 on HP 600xt Touchsmart

When you burned your disc did you use the slowest speed available? I've often had issues when burning Microsoft ISO to quickly. I would also check that you have the latest BIOS\Firmware updates.

4 more replies
Answer Match 69.72%

Hello I have a HP Pavilion TouchSmart Laptop.In the last week the touch screen has stopped working.I was just wondering if anyone was able to help me to get this running again as its really annoying without itThanks in advance

More replies
Answer Match 69.72%

I am having trouble with the touch screen aspect of my computer. It works to scroll pages, and click icons, but the multi touch to zoom has stopped working. I have already turned off the touch screen and turned back on, and also have reset my comupter back to default. Help please!
 

More replies
Answer Match 69.72%

My question: Is the TouchSmart tm2 compatible with WIN 10 and what must be accomplished to achieve a successful install? First, a slignt rant.I was successfuly running WIN 10 on my TouchSmart tm2 when I updated a video driver and afterwards could only get a blank screen. Yes, my bad! I paid HP $99 for incident support and their only suggestion was to do a full system recovery & reinstall WIN 7 Pro. Really? You made me pay for that?  Since I didn't have the OS disks (it was OEM) I had to pay HP $25 for the media and $15 FOR SECOND DAY DELIVERY ONLY TO HAVE THE MEDIA ARRIVE ON DAY 3.  I can't reach anyone at HP to refund the delivery failure. Now support is stating that my computer isn't compatible with WIN 10. If I was successfully running WIN 10, why is it now un compatable?  

A:touchsmart tm2 and win 10

I have just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.

3 more replies
Answer Match 69.72%

My HP Touchsmart 600 desktop computer has a roughly 5 inch square dead spot on the upper left hand corner of the screen.  Is this a problem that can be easily repaired?  If so, can this be repaired locally? Thank you... Bruce A. Henderson

More replies
Answer Match 69.72%

Buongiorno, volevo sapere se c'č una varsione aggiornato TouchSmart suite per windows 10.Dopo l'aggiornamento da Windows 7 a Windows 10 icona non funziona pių.Grazie aspetto

A:HP TouchSmart

  hi this is a English support forum not Italian

1 more replies
Answer Match 69.72%

My hp touchsmart 300 1025 is shutting down unexpectadly. I have had it for a little over a year (out of warranty) and it just started to shut down after a few minutes of use. Not sure if it is an overheating problem or a power supply issue? Anybody with same problem? Suggestions welcome!
 

More replies
Answer Match 69.72%

Hello, i have a HP TouchSmart computer that i need to reformat badly. I am wondering if reformatting it with any regular vista CD key will lose such features as the touchscreen, wireless mouse & keyboard, built in webcam.

The Original owner of the computer claims it came with its own Vista CD key that he lost.

A:HP TouchSmart

Hi Jack0000


If the HP restore partition is in good condition (not damaged or malware-ridden), you can perform a re-write of the factory-original hard-disk-image by tapping the F11 as your HP is first powered on, then following the prompts as shown (step-by-step, with screenshots) in the following instructions at the HP support website --- http://h10025.www1.hp.com/ewfrf/wc/d...=3752240#N1066

Note that you'd first want to move any data that you wish to save off to removable or external media before you run a return to factory original.

Once the factory-original image is restored, you'll have to visit Windows Update to get the Security Updates since the TouchSmart was shipped. You'll want to update the Security software as well (if you need a free alternative, I think "avast! antivirus" is a good choice).

Once the PC is updated and fully protected against malware, you can then create a recovery disk set onto DVDs following the instructions from this HP support webpage --- http://h10025.www1.hp.com/ewfrf/wc/d...name=c00882383

Having made your own Recovery DVD set allows you the freedom of running the recovery onto a new, blank drive - should you need or wish to upgrade to a new hard drive in the future.

You can, of course, also order Recovery DVDs directly from HP for most models. The price is considerably less than purchasing a Windows license retail. Much less.

Best of luck
. . . Gary

2 more replies
Answer Match 69.72%

Good morning, I wanted to know if there is a varsione updated TouchSmart suite for windows 10.After the upgrade from Windows 7 to Windows 10 icon no longer works.Thank look

A:HP TouchSmart

  HI there is no windows 10 driver for HP Touchsmart 600-1205it 

1 more replies
Answer Match 69.72%

Hi, I have a touchsmart tm2, with windows 7 x64 and  i could use a external monitor, with no problems.when i upgrade to windows 10, the external monitor canīt be deteted.i upgrade the amd driver and the intel driver, but it donīt work.Can anyone give a help! Best regards 

More replies
Answer Match 69.72%

Hello I have a HP Pavilion TouchSmart Laptop.In the last week the touch screen has stopped working.I was just wondering if anyone was able to help me to get this running again as its really annoying without itThanks in advance

A:touchsmart

Hello @S_tim, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are having an issue with the Touch Screen, and wanted to assist you! To start, can you provide me with the Product Number and Operating System of the notebook?  You can use the links below to help you with that information:HP Customer Support - ProductsWhich Windows operating system am I running? In the meantime, try performing a System Restore to set the notebook back to its previous working state.  If you are still having trouble, then try reviewing the following document, and let me know how it goes: HP Notebook PCs - Touch Screen Issues (Windows 8) Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great day!

1 more replies
Answer Match 69.3%

Hi all,

I have been getting BSOD sporadically on
HP touchsmart 600 all in one pc Home premium Windows 7 64bit.

I updated the driver but nothing happened. also uninstall all unnecessary programs but nothing yet.


Last dump info:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80003090611
BCP3: FFFFF880009A9998
BCP4: FFFFF880009A91F0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\041715-20982-01.dmp
C:\Users\Admin\AppData\Local\Temp\WER-361111-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


Your help is well appreciated.

Thanks

A:HP touchsmart 600 with BSOD

I wanted to add that, this might be happening when updates are getting installed or something like that.

5 more replies
Answer Match 69.3%

I have an hp touchsmart iq 506 and I wanna do a dual boot by adding xp to it. but I need some explanation please if you can help me

More replies
Answer Match 69.3%

My hard drive is going bad (does not recognize hard drive on startup, did have a periodic clicking noise recently but that has gone away). 1.  Is there a way to confirm if its the hard drive or controller2.  Will the recovery USB load the OS?  If so which one.  I upgraded to Windows 10. Thanks for your help.

More replies
Answer Match 69.3%

I have been dealing with a broken home on my laptop for more than a year. I just searched these forums and found ~70 posts all with the same issue. This seems to be due to poor design that never should have made it past the quality assurance engineers, having a metal hinge screwed into non-reinforced plastic. I find it reprehensible that a premium laptop was made so poorly. I am told by local PC repair shops that it will cost me $400+ to get this fixed. That's 1/3 what I paid for the machine in the first place.I tried calling support and was directed to log onto the support site for assistance, from which I was directed to search the forums. I thought HP made better products than this, but hadn't wanted to put up the money to get one to find out. Then I bit the bullet and got rewarded with a busted hinge on a laptop that spends its days being used by my wife at home, bring opened and closed 2-3 times per day. And now it seems like I'm going to get the runaround to get this fixed, or just have to trash an otherwise great machine due to crappy hinges. I love this laptop as far as performance and hardware specs go but it is a pain to open and close to try and avoid breaking the other hinge and essentially removing the screen.Any guidance on what I can do to get an actual answer or a case submitted to get any useful help?

More replies
Answer Match 69.3%

Hello, Our TouchSmart PC will no longer turn on. It was working yesterday but today will not turn on. The LED on the back of the computer where the power supply meets the PC is off. When you press the power button the LED light flickers green one time but remains off. The computer does not power up at all. I have tested the power supply with a laptop and it is working. I have also tried another identical powersupply on the PC but the same thing occurs. Thanks  

A:HP TouchSmart 520 All-In-One Won't Turn On

Hello @cb086, I have reviewed your post and as the adapter works on another device I believe you problem is on the motherboard. The issue appears to be a physical issue. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.I would like to thank you for posting on the HP Forums. Have a great day!

2 more replies
Answer Match 69.3%

Hello!  I have a TouchSmart 600--an all-in-one with several inputs except one for a second monitor. (On Windows 7). I purchased a VGA - HDMI (AV?) adapter hoping it might work.It did not.Asking for help, or a direction, please. I've searched through several different forum threads similar to mine, but the responses were several years old with no resolution besides perhaps I should have gotten a USB adapter. I've yet to find someone who successfully paired a second monitor. I did get to Display - clicked detect. Nothing was detected. Second monitor (19inch Acer) says no signal. Appreciative of any advice    

More replies
Answer Match 69.3%

I was unplugging my power cords and I happened to turn off the power to my HP Touchsmart. Later on when I turned it back on, my HP Touchsmart won't switch on. The lights on the big batter adapter thing is on. The light at the back of the computer indicating that power is reaching the computer is on. However, I just can't turn it on at all. The power button does not light up.I've tried the solutions posted on other threads but nothing has worked. I had just been using my computer the previous day. I suspect that me turning off the main power might have done something.Look forward to getting some solutions.

More replies
Answer Match 69.3%

I have a HP TouchSmart Computer. Since downloading updates from HP and Microsoft - my computer does not want to work - My Computer uses Vista.

It starts off fine, however as soon as I open a programme, task manager, anything - it stops says its 'not responding'. The only way out is to hold the power button in for approx. 5 secs.

I am not to up on computers, I have tried lots of things, i have had a couple of codes 0x490 and 0xc000000f - but I am not lost - I am using my old computer to put this message on here - whilst my HP TouchSmart sulks.

Any Help Please ~ Thank You in advance ~ Gail
 

More replies
Answer Match 69.3%

I am new to the forum but a long time computer tech. I have been to the forum on various occasions for help on fixing different issues. I have to say this is a great community that helps alot of people including myself. I've ran into an issue that I believe is needing some of you guys expertise.
What I have is a touchsmart laptop from HP that the keyboard and the touchpad mouse quit working. I have searched all over the internet looking for answers and came across a few telling me to pull the battery and AC adapter to reset the computer. I've had no luck on this being a solution. I have read that booting the computer with the touchscreen facing out is what causes this issue.

So I've tried pulling the power and the battery then holding the power button in to drain any residual energy left on the CPU. And upon booting the computer keyboard will respond but only for the menu that states for starting Windows normally or in Safe mode. After letting the computer boot completely the keyboard and touchpad quits working altogether. This is booting it up in safe mode or in normal mode. The laptop is running Windows 7 Home Premium and I believe that this is my only issue. Any help or ideas on what else to troubleshoot will be greatly appreciated. Thanks in advance.
 

A:HP Touchsmart tx2-1377nr

bump
 

1 more replies
Answer Match 69.3%

I have an HP Envy20 AiO touchsmart pc and just installed win 10 and it has been working fine and I restarted it today and the power button lights and the fan goes but the screen remains black. I can use my mouse but not my keyboard and every few minutes it sleeps numerous times for seconds then comes back yet the screen stays dark.

More replies
Answer Match 69.3%

moved house recently, hooked the computer back up in the new office and the wireless keyboard worked for about 2 minutes. I changed the batteries but to no avail. Went and bought brand new batteries and again no go but the wireless mouse is still working fine. I have tried the blue connect button on the back of the keyboard but still nothing. Any ideas or suggestions

A:HP touchsmart 520 keyboard

To help you troubleshoot the issue with wireless Keyboard, please find the link given below and follow the step-by-step instructions mentioned on it:http://support.hp.com/in-en/document/c00006821#AbT1 Hope this will help you.

1 more replies
Answer Match 69.3%

I am experiencing with a laptop of series hp touchsmart tx2 !

The problem is that the whole view that i get on the screen is not getting loaded only half the screen is shown . I dont know what might be the error behind this ? And in case u think this might be due to i dropped my laptop or something it is definitely not . I have not dropped my laptop .

Can some please suggest to me what might be the problem ?
 

More replies
Answer Match 69.3%

New Computer, that I need to send in, but for piece of mind, I would like to know what's going on. They will repair back to original state, but I will have to reload all programs. Want to make sure that it is not a conflict. Windows 7 64 bit Ultimate.
Thanks in advance for all the help.

A:BSOD - HP TouchSmart 600

SNAFU, welcome to the forum. That is quite few dumps! I looked at your four most recent dumps. All have the same error code and are nearly identical.

I recommend that you uninstall Zone Alarm using this uninstall tool: http://download.zonealarm.com/bin/fr...cpes_clean.exe. ZA is a documented and well known cause of BSOD's on some Win 7 systems. Make sure Windows Firewall is turned on.






Quote:
Error code 7F, UNEXPECTED_KERNEL_MODE_TRAP.







Quote:
Usual causes: Memory corruption, Hardware (memory in particular), Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack



Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c1c000 PsLoadedModuleList = 0xfffff800`02e59e50
Debug session time: Thu Nov 4 16:19:58.484 2010 (GMT-5)
System Uptime: 0 days 21:58:02.827
Loading Kernel Symbols
...............................................................
................................................................
.............................................
Loading User Symbols
Loading unloaded module list
....
************************... Read more

3 more replies
Answer Match 69.3%

In my quest to clean out a bunch of unused programs, I found that I have HP TouchSmart Recipe Box.

After researching about this, I decided it just might be something my wife could use; however, everything I have read about it says it is for HP TouchSmart computers.

My desk-top is HP but I don't think it is a TouchSmart.

My question is, must we have a TouchSmart computer to utilize the HP TouchSmart Recipe Box ?

Thanks.
 

A:HP TouchSmart Recipe Box ???

Try these Google searches:

HP Magic Canvas
HP TouchSmart Recipe Box

What exact model of HP do you have? I find it difficult to believe it isn't a touchsmart if it came with the software. It looks like the apps can be used with a keyboard in many cases, though. See review video in your other thread.
 

1 more replies
Answer Match 69.3%

Good Evening, I have a HP Touchsmart TM2-I can supply the specs if you need them- and it has just started to crash at almost every click/action which I take. THis has only happened within the last couple of days and it has been instant, rather than over time. I did a System Restore but this didn't solve the issue. It may ahve been because I had to stop a disk check last week because my laptop battery died but I'm not sure if that would have such a big effect on the laptops performance.

Any help is greatly appreciated!

Thanks a lot
Dan

A:Hp Touchsmart TM2 crashing

That would have a huge effect not finishing a disk check. If you can boot in, Make sure you have your power adapter attached, Go to Start/Search and type CMD Right click the CMD.exe icon in the Search Results and Run As Administrator. In the Command Prompt type chkdsk /R and press enter. Now type a Y and reboot the computer. The Check Disk Utility will try and fix any problems.

3 more replies
Answer Match 69.3%

Windows media center live tv works. Touchsmart live tv product of Cyberlink, comes up with a blank black screen. Seems there should be some way to e.g. sync these two programs to Touchsmart works. Any ideas are appreciated.

More replies
Answer Match 69.3%

My HP touchsmart 520 pc is not booting up and I am looking for support.  Using a multi tester to test the power adapter the adapter reads 17.30v however when i plug the adapter to the computer the light above the power outlet flashes for a split second and disappears. When I unplug the adapter from the back of the computer and checks voltage it reads 0 v (zero volts) . I have to plug it out of the main source and back in so it reads 17.30v again. Once plugged into the computer it immediately drops to zero. I need help to know the source of my problem if it is the adapter or the computer.

More replies
Answer Match 69.3%

Hi, I need to purchase a new motherboard for my TouchSmart 610.  I've opened up the computer and found that the motherboard installed in the computer is model number DA0ZN8MB6I0 (Part number 648511-001).  While trying to find a place to purchase this mother board, I see that is motherboard is fairly expensive.  While searhing I also found another motherboard, model number DA0ZN9MB6H0 (Part number 648512-001), which is also used in the TouchSmart 610.  Visually this motherboard looks the same at the orignal motherboard and is significanly cheaper.  The part numbers differ by only one digit (before the revisoin number, 001), which makes me think that the two motherboards are very similar. Does anyone know if these two motehrboard are compatiable/interchangeable?  Where can I get information on the difference between these two motherboards? My motherboard has a built in video cards, does anyone know if the second motehrboard does as well?  or will I need to purchase a seperate video card if I were to purchase that motherbaord? Thanks for the help.

More replies
Answer Match 69.3%

Hello everybody. I would like my Hp touchsmart 300 desktop to be upgraded. i only have 2.7GHz as my processor. I would like it to have atleast 3.7 GHz. Do this pc have graphics card? I would like to buy one to place or replace if there is a graphics card. I will also make this pc 8 gb ram. Any  suggestions what parts i will buy 

More replies
Answer Match 69.3%

Is this pc compatible with win 10?Thansk  

A:HP TouchSmart 600 Windows 10

I have a HP TouchSmart 600 and based on my experience it's not compatible with Windows 10  not even with Windows 8.x and later.

1 more replies
Answer Match 69.3%

Have trouble for weeks.

Details:

? OS - Windows 7 Ultimate x64
? What was original installed OS on system? = Vista
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? HP oem
? Age of system (hardware) 2009
? Age of OS installation - have you re-installed the OS? december 2011

? CPU = Mobile DualCore Intel Core 2 Duo T9900, 3066 MHz (11.5 x 267)
? Video Card = NVIDIA GeForce 9600M GS (512 MB)
? MotherBoard = Asus IMIMV-CF (Maureen) (2 Mini-PCIE, 2 SO-DIMM, Audio, Video, Gigabit LAN, IEEE-1394)
? Power Supply - brand & wattage = unknown

? System Manufacturer = HP
? Exact model number (if laptop, check label on bottom) = TouchSmart IQ830NL

A:HP TouchSmart BSOD

Hi -

I received your PM re: no dump files.

When are the BSODs occurring? (immediately after boot-up or ... minutes, hours later?)

Please see - NO KERNEL MEMORY DUMP FILES BEING PRODUCED UPON BSOD?

Can you read info from the blue screen? I'm looking for the STOP error and a driver name.

Regards. . .

jcgriff2

`

11 more replies
Answer Match 69.3%

Hi

I have just bought one of these damaged. The screen is smashed, there is no HDD, RAM, Battery and Power Supply. It also has bad damage to one corner (been dropped from a huge height by the looks) thus damaging lid, palm rest and base. I know RAM and P/S are not a great cost issue but I'm not sure if it is worth buying a new screen and hdd for it. I paid ?42.00 for laptop as it was part of a job lot, and I see they retail at around ?500-?600. Should I fix it up to sell or keep, or just sell it as it is to see if I can make a slight profit?

A:Hp touchsmart tm2-1010ea

Forgot, obviously, not been able to check MOBO on it either yet, no spares to check it.

6 more replies
Answer Match 69.3%

So I have a question...I am wanting to upgrade my 4GB of RAM to 8GB of RAM. I know type I need but I don't know if I need to buy another 4GB Module or if I need to buy the 8GB kit...Do the RAM Module need to be the same brand or can they be different brands and work.
 

A:Hp TouchSmart 320 Ram Upgrade

8 more replies
Answer Match 69.3%

My HP TouchSmart 610 All-in-one had a component failure and had to have a reinstall.How do I reinstall the TouchSmart software for webcam, video, photos, etc?

More replies
Answer Match 69.3%

I bought a8GB [2x4GB] DDR3-1333 RAM Memory Upgrade Kit forto upgrade my HP Touchsmart 600-1050 All in one. However, it hadn't worked and showed only black screen after installed.The discription is4GB DDR3-1333 PC3-10600 Non-ECC Unbuffered 204 Pin 1.5V CL=9 Memory After then, I bought a different one of8GB Kit (4GBx2) DDR3 1600 MT/s (PC3 - 12800) CL11 SODIMM Notebook Memory Modules CT2KIT51264BF160B / CT2CP51264BF160B at amaozn.com It has the same problem.Are those not compitable with my computer? If so, please let me know a compitable memory set for upgrade.   

More replies
Answer Match 69.3%

I am attempting to repair an HP Touchsmart 300-100.....system fires up....no screen but fans are going like crazy....replaced CPU.....no difference !.....HDD light doesnt light up but you can feel the HDD running if you touch it !.....Motherboard failure ?
 

A:HP Touchsmart 300-1000

Is it actually a 300-1015uk(VG254AA) or a 300-1025uk(VG255AA) HP TouchSmart model?

Screen Is Blank After Starting Computer

----------------------------------------------------------
 

2 more replies
Answer Match 69.3%

I have a currently crippled HP touchsmart 300-1003. I replaced a dead hard drive with a new 1TB HDD. I have available to me 2 sets of touchsmart recovery disks, and Windows 7 Bootable USB drive (made with win7 tool). The official recovery CDs do absolutely nothing but tell me MBR IS MISSING PRESS CTRL ALT DEL TO RESTART. The bios lists my new HDD (can tell because size is now 1000GB). I cannot choose USB drive as first boot in bios or boot order (this pc has two different menus for the same function, idky). Is there a bootdisk I can use to fixmbr? Please be so kind to provide a guide to getting a touch computer running from the begininng. All the advice online seems to be for computers that will go to a recovery screen already. If I could do that I wouldn't need the disks, lol. I would like to install the touchsmart software but will settle for any windows at this point. Thanks in advance to anyone that is able to walk me through the process.1 Hour Later: To use MSWIN7 USB Tool, I had to ENABLE BOOT DIAGNOSTIC from BIOS, power on, let the black screen read Configured 01 usb drive, ctrlaltdel, f10 to bios again, disable boot diagnostic screen, save and continue f5, then hit ESC for tiny boot menu at the HP LOGO, pick USB 2.0 as first boot. The tool started windows as Repair (which I followed MSguide for bootsec and /fixmbr, no clue if that fixed mbr tho) and Install Windows 7. I picked install. More updates to come.

A:HP Touchsmart 300-1003

hi i would download a hdd utility from the maker of the harddrive ,burn it to cd ,usually instruction on ther sitr on how to do this ,to setup harddrive for first time use,it may just need to be formatted to create that mbr that seems to be missing .
burn it to cd ,usually instruction on ther sitr on how to do this ,,
a list of links to most makers can be found on bleepingcomputers i thought but i couldn't fine i ,i will post this site with links to most makers .good luck
http://www.tacktech.com/display.cfm?ttid=287

5 more replies
Answer Match 69.3%

Hi, The LCD on my Touchsmart 11 has failed. It was flickering vertical lines for a while and has now died completely. The HDMI output still works. The laptop is out of warranty. How can I send this back to HP for repair and any idea of cost? Thanks, David

More replies
Answer Match 69.3%

Hi, I just recently got an Envy All-in-One Touchsmart; it is a super machine and so far, so good. The 10-point touch is really cool, but there are many instances when I would like to be able to use a pen in order to be more precise in my pointing or to "mark up" a document.  I know Microsoft Office has the "inking" feature because I use it on my Laptop with a "pen" while I am traveling and have found it invaluable -- and, by the way this laptop is both touch and pen enabled. I tried to enable "pen" by going to the Control Panel feature that is says says Pen and Touch, but when you do so, it is only for Touch.  How can I make it so that it both touch and pen enabled?  If that is all possible, what type of "pen" do I need? Thank you very much











Solved!
View Solution.

A:Enabling Pen on TouchSmart

Hi AIResnick, A stylus used on a capacitive touch screen basically just takes the place of your finger, so enabling touch on the computer will enable pen input as well. But it can't just be any pen or stylus, the material at the tip has to be something that will register as touch on the screen, and not scratch it. I read your other post and I understand you're looking for a finer-tipped stylus, rather than the ubiquitous blunt-ended, eraser-type stylus pens. That limits your options quite a bit, because I believe the larger surface area is part of what makes those pens work on capacitive screens. (Other types of touch screens can use other styles of stylus, including pointy-tipped ones in some cases.) I've heard good things about the Jot Pro from Adonit. I haven't tried it, so I can't speak from experience. The design seems clever--it looks like they attached a clear, flat disc to the tip of a metal pen, so you can see precisely where you're writing with the point of the pen, but the clear disc provides enough surface area for the touch to register, and prevents damage to your screen from the sharp pen point. I hope that helps.

4 more replies
Answer Match 69.3%

Hi all,

Does anyone here experience install Win XP Pro on HP touchsmart tx2(downgrade from Vista)? I need some advise. thank you.

A:Install XP on HP touchsmart tx2

I would advise you not to install XP on a touchsmart PC. The reasons are as follows.

1. Make sure all of the drivers are available on the HP Support website.
2. Since XP tablet edition is not available in retail, the touch screen won't work.
3. You will have ask HP to give you a OEM version of XP tablet edition (which I don't think they will provide).

If you just want to use it as a non-Touch screen PC. Go you may go ahead only after you have confirmed that the drivers are available.

Post back if you have any more questions.

2 more replies
Answer Match 69.3%

ok guys i really need some help/guidance here.  There is so much infomation here that im sincerely overwhelmed... I will give you as much information as I have and hope SOMEONE can help! First, I hope i selected the correct board to write this in. As stated, I have a pavilion touchsmart23 all in one pc. I am NOT at ALL computer saavy so work with me here. I dont know if its 32 bit or not nor do I know if it is imperative to my issue. Here is my problem. My computer works fine 70% of the time. Suddenly the screen will go black and give me a disk boot error message. I cant remember word for word but this is what it saYS: "no boot disk has been detected or boot disk has failed". When this happenes, I have to disconnect the computer from the wall and reconnect and start over. This always fixes it so it leads me to believe it is some sort of glitch. I called HP and they told me to run a system quick and extensive check on the hard drive which i have done. Both passed and no errors reported. Another thing that will happen is that the screen will go dark, (typically after idling and when i return and move the mouse or type on keyboard, the screen never lights up again as its supposed to when it is no longer idling. It stays VERY dark and I can barely makeout the screen.  I am not sure why this is happening nor do I know what steps to take from here. I am hoping someone can suggest the next step for me or refer me to a thread that already covers thi... Read more

A:hp pavilion touchsmart 23 all in one

2 more replies
Answer Match 69.3%

I recently baught a hp touchsmart 320-1010a running windows 7 home premium and then installed a new version of windows (windows 7 ultimate) and now the touch screen doesnt work and i have non of the hp touchsmart applications like, hp magic canvas and others. i installed all the drivers from the hp webbsite and it still doesnt work
can somebody please help??? im dying here !

A:My HP Touchsmart is broken please help!!! )';

Download Drivers from the HP Site, Download originals. Make sure you are downloading 64 Bit if you have a 64 Bit OS or x86 for 32 bit Windows.

19 more replies
Answer Match 69.3%

Hi
My mother bought one of these and the keyboard broke. So I'm using the touch pad.
Problem is the more peculiar buttons like Prnt Screen and Delete went missing.
They went missing for some unknown reason as I was typing.

Does anyone have any experience with this trainwreck of a computer?
 

More replies
Answer Match 69.3%

Hello I have a touchsmart 300 and it has no sound from the speakers or headphone jack. I have tried the troubleshoot thing and it dont recognize anything wrong with them. please help. ive tried updating the driver and it says it is updated. so lost. thanks.
 

A:Touchsmart 300 no sound

Did your pc have working sound when new?
Check the volume level, it's easy to turn it right down or mute it.
Check if the speakers are selected by going to the speaker icon in tray near the current time.
Right click on speaker icon, choose 'playback devices'.
A new box appears, with a speaker and it should have a green tick over it.
Right click on the icon and choose the option 'test', you should hear audio tones.
If you don't have a green tick, right click on icon and choose 'enable'.
 

1 more replies
Answer Match 69.3%

I've got a TouchSmart 610-1280qd desktop. It was working fine until 1 week ago when my home had a power outage. Now, it won't even boot up. No power, nothing. Even the power brick light is out. I bought a replacement power brick and when I plug it in, the green led light on the new brick(the old is blue) immediately goes out and there's still no power. The power button effects no response, nor does any button on the keyboard have any effect. There's just no power to the entire computer. I've tried plugging both the old and new power bricks in and initially, the blue and green lights on each respectively go on, until I plug them into the desktop.  Then the lights go out and still no power and no response by pressing the power button or any button on the keyboard. I've also tried plugging in the old and new power bricks without the surge protector. The power bricks lights go on, but as soon as I plug them in, still no power. I've tried different outlets around my house and the power bricks lights go on, but as soon as I plug them into the desktop, no power. I've tried plugging he power bricks into the desktop first, then the outlets, and no power at all either in the desktop. There is no response at any stage where i've pressed the keyboards buttons. The desktop just doesn't have any power at all.   Anyone have a problem with this? I really hope it isn't what I think it is and the motherboard is out.      &nb... Read more

A:Touchsmart 610 no power

Hi there @MrJimCee1, Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that your computer is not starting properly and does not appear to be getting power. I am happy to help with this.  I recommend that you look at this document: HP PCs - Computer Does Not Start (Windows 7). For your purposes you are probably going to have to do Step 1 and then in Step 2, the first section "The computer does not turn on".  If after finishing Step 2 there is a change, and the computer is getting power let me know if there is still an issue I can help  you with, if it still does not receive power, then you should contact phone support. Please use the following http://www.hp.com/contacthp and create a case for your issue and contact HP. If you live outside the US/Canada, please click the link below to get the contact information for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html Let me know how that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

1 more replies
Answer Match 69.3%

Hello, so I have a hp touchsmart 600-1350a although theres no av cable or hdmi port i checked on the web and it said thathp touchsmart has a hdmi port, also I dont have any ambient light too?

A:PS4 to a HP Touchsmart 600 - 1350a

Hi @markdag, Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel.I understand that you are looking for information on connecting your Touchsmart  All-in-One to a PS4. I am happy to give you a hand with this. The available connections on Touchsmart and All-in-Ones in general vary from model to model. Some have an HDMI port that can be used as an input, and others do not. Looking at the specifications of the model you gave: HP TouchSmart 600-1350a Desktop PC Product Specifications, it shows in one diagram that it could potentially have video inputs, but it is an option. If your system does not have those, then you would not be able to use the display on the All-in-One with your PS4.   I hope that helps clarify, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.   

1 more replies
Answer Match 69.3%

I'm wanting to add a second screen to my Touchsmart 520 for work but i'm not sure if i can do this or how to do this.. please help.

A:Can i add a second screen to my HP Touchsmart 520

Depending on what the device is expected to do, something along this line might be what you desire.http://www.amazon.com/Plugable-Graphics-Multiple-Monitors-1920x1080/dp/B004AIJE9G/ref=sr_1_12?s=elec...

1 more replies
Answer Match 69.3%

Hello

My HP Touchsmart has never worked properly, Tons of problem, crashing error message etc etc. Computer was sent to HP for repair but it came back whit the same problem. I have spent hours with HP tech support running scan and making recovery with no succes. Recently I have replaced the hard drive on HP tech support recommendation. it worked for awhile but now it dosen't even boot! I don't want to call HP anymore and I wander if somebody can help me or if I should just give up.

Thanks
 

A:Trouble with HP Touchsmart

Call HP and ask to talk to a manager, then explain what's happened and the number of times you called and that you've had to send it back and demand that they replace the computer with a new one. All-in-Ones are similar to laptops, the repairs are expensive and parts are hard to get, it's best to get the manufacturer to repair or replace it especially under the warranty.
 

3 more replies
Answer Match 69.3%

Machine is overheating. Dismantled and lots of dust etc cleaned out but small fan is not working and need a replacement.   Bar code number of existing fan is 1323 00230H2 oA F000 099L     06LH

A:where can I get the smaller fan for an HP Touchsmart 300 PC ...

Hi there @Superuserhp, Welcome back to the HP Support Forums! I understand that you are looking for a replacement fan for your computer.  I am happy to help with this. I would recommend that you check out the HP Parts Store. Be sure that your country is selected and then put in the product information. If the part is not currently in stock, there will likely be authorized sellers listed for the part as well. Please let me know whether that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

1 more replies
Answer Match 69.3%

I upgraded from windows8 to windows10 and now all of my touchsmart software for tm2-2150 is gone.  Where do I go to download? 

A:hp touchsmart software is gone for my tm2-215

Hi, Only available for Windows 7. Please check to see they work or not:     http://support.hp.com/us-en/drivers/selfservice/HP-TouchSmart-tm2-Notebook-PC-series/4247583/model/4... Regards.

1 more replies
Answer Match 69.3%

Can I install XP on this workstation? It's now runnig on Vista.
I think that will get a problem with the drivers.....

More replies
Answer Match 69.3%

I have turned on the pc and found out that there is "cpu fan not detected" f1 - boot.I was advised bybthe owner to use vaccuum cleaner to clean the fan at the bottom. It works pne time but after a while comes the same problem again. How can i solve it without opening the product?

More replies
Answer Match 69.3%

Upgraded to windows 10 and now unable to use convenient features I've had for years.  My touchpad is disabled, so can't just tap the pad to select what I want; my DigitalPersona fingerprint is disabled and in trying to enable it again, it appears to want to trick me to permanently delete my saved fingerprint.  How can I get these features back.  Thanks.

More replies
Answer Match 69.3%

I have turned on the pc and found out that there is "cpu fan not detected" f1 - boot.I was advised bybthe owner to use vaccuum cleaner to clean the fan at the bottom. It works pne time but after a while comes the same problem again. How can i solve it without opening the product?

More replies
Answer Match 68.46%

hello.it's been 2 years since i use this pc and it works just well,but today,when i turned on the pc it can't boot. It just turned on,but the screen show nothing,and when i say nothing i mean really really just like it doesn't get turned on. i tried to push the DVD button and it is still working,the light on the power button also work,and everytime i tried to turned it on and off the sound of the pc turned on still can be heard. so its just like everything is ok but the computer isn't booting.ussually before this happened,it took only 3 seconds after i turned on the pc,to boot into the loading screen,but now it does nothing.one day before,i upgraded to windows 10. and it is still working,the next day it is also still working,then i shut it down. the next time i tried it(ijust about 15 minutes i turned it off ,it won't boot. ) i don't know if this is related,but in the internet people said that things like this happened because of the hardware and not the software.please help me,i really need this pc to get back to work thank you,and sorry for my bad english

A:HP Envy 23 touchsmart won't boot

@adrian_sts?
 
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.Thank you for visiting the HP Support Forum.

9 more replies
Answer Match 68.46%

When I push power button power led goes on, nothing happens on screen, stays blank. DVD is seems to be working, when I push eject button, could hear whirring sound and tried with disc, it goes in and out and spinning up. Fan is starting to spin up for a second or less then stops. No sign of HDD spinning up. Tried USB ports with a mouse, when I plug in it lights up for a sec then goes off. All ports are doing the same including side and back ones. Removed the back panel and deattach and reattached memory modules. Tried to move the connectors little bit, but no success.Seems to be a HW failure but not sure. Any idea?

A:Touchsmart 610-1280qd not starting up

Did you get any answers on this? I seem to be having the exact same problem.

1 more replies
Answer Match 68.46%

I bout this iq500 second hand nearly a week ago, it already had installed windows 10( not sure what original was/is), ive reset back to factory settings and everytimes it goes to start back up... It does its loading thing then get to a blue screen that say's,Hello there!Lets get a few basic things out of the way.And then it has scroll down options well thing is the touchscreen wont let me click any option and the mouse and keyboard i have plugged in wont let me click options ... It was fine before i reset pc but it was a little slow hence reason for doing it... Ive been wrecking my brain and googling forums to try find out how to fix but i cant find info about my problem anywhere....Any help will be muchly appreciated!Many thanks

More replies
Answer Match 68.46%

K, this like recently happend but like every 10-30 minutes my computer would shutdown, never did this with windows 7 but windows 10 yea, before it shutsdown the screen would go black and the noise would still be there and the blue light on the side would still be on for like 3 seconds then shutsoff completley, please help

More replies