Tech Problem Aggregator

Driver for Canon LBP-1120 Lasershot on W7 x64

Q: Driver for Canon LBP-1120 Lasershot on W7 x64

Hi,

I have been searching several websites, downloaded a lot of junk and tested a great many so called solutions. In spite of all efforts I could not find a working solution for the LBP-1120 on W7 x64.
Although I guess most LBP-1120 users got tired of searching and simlpy threw away their printer, I refuse to do that. So I'm running it on Virtual PC under W7 x64, a complicated afair if one has to print just a few copies. The latest thread on this (and most other forums) is of 2009, so did anything happen after that date?
Does any one know of a working (tested!)driver solution for this printer? It's a shame that Cannon did not provide a decent driver. The vista / W7 x64 does not run on x64 platforms in any mode! Even for old Epsons I was able to find W7 x64 drivers.

Kind regards,
Dave
The Netherlands

A: Driver for Canon LBP-1120 Lasershot on W7 x64

First, make sure you uninstall any previously installed printer drivers in add/ remove programs which may conflict with the installation.

Check Device Manager for driver issues.

Select the newest version from the list. Then click download.

Do not turn on the printer until the software is installed.

Laser Shot LBP1120

9 more replies
Answer Match 84.84%

I am still trying to install my Canon printer, the computer finds it with P & P but sticks it in unspecified,
in USB properties (hardware) there is a driver under other devices and with USB printer support, but the printer isn't showing in "device & printers" I cant use "add printer" as I don't have the disk and it is not listed under windows update, I'm past it, can someone help me
should read Canon LBP 1120

A:installing Canon Lasershot LPB120

Install the driver. Can be found here Laser Shot LBP1120 - Canon Europe

1 more replies
Answer Match 78.96%

Please help me. I have vista 64 but i can't find any driver for Canon LBP 1120. Help me because i don't want to buy another printer.

A:Canon LBP 1120

Hi EugeneBek,

Welcome to the forum.

Sorry, the only drivers I can find for the Canon LBP 1120 are the 32 bit ones. There are no 64 bit ones for this printer yet from what I see.

http://software.canon-europe.com/products/0000524.asp

Shawn

1 more replies
Answer Match 78.12%

I'm going mad trying to use this printer!
I have found only the Vista 32bit drivers.
I tried to install them (by manually select them, not with an exe application, so I can't choose the vista or xp compatibility check) to my windows 7 32bit but at the end I got an error about the spooling service that was blocked during running.
can anyone please help me? thanks!

A:Canon Printer LBP 1120

It is best to uninstall the old drivers and run the exe file in compatibility mode for the new driver.

Here's a link to Technet for the same problem.

Canon LBP 1120 can't install : Windows 7 Hardware Compatibility : Windows 7 Beta : Microsoft TechNet Forums

8 more replies
Answer Match 77.28%

i got this canon lbp-1120, it was wworking fine, i did an upgrade to WinXpSp2 now the printer wont install,when i plug it in,the system detect it but i get this massage found new hardware printer installtion cannot be complated. Anybody with a solution to this problem,i 've downloaded the latest drivers and upgrade but it still wont work.
 

More replies
Answer Match 65.94%

Need a driver for 600-1120 I need ACPI\HPQ4000 specifically... is this driver included in bundled drivers? Any help appreciated

A:Need ACPI\Hpq4000 driver for 600-1120

 Hi, ACPI\HPQ4000\4&15DD6BE&0  Original Fintek eHome Transceiver Driver ftp://ftp.hp.com/pub/softlib/software11/COL35151/pv-87085-1/sp49795.exe http://support.hp.com/us-en/drivers/selfservice/HP-TouchSmart-600-Desktop-PC-series/4079692/model/41...

2 more replies
Answer Match 52.5%

Hello))

I need help..please ))
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..

advice please..??

A:Window 7 64 bit cannot install driver sotware(canon printer driver)

Hi did you try a system restore to a point when it did work.

2 more replies
Answer Match 48.3%

It seems like this is an impossible task.

I work at a non-profit (read: no budget) and our 3 computers crashed. We got a new laptop donated and everything is installed on it. However, we cannot find a driver for our copier:

Canon GP 200

Which supports Windows 7 Home Premium 64 bit

HELP!

We cannot afford a new printer and everything is set aside from this... anyone?

A:Canon Driver

Hi sunnyslope, Welcome to the forums, I'm afraid doing a quick search failed to find a driver for the printer after 2005 and that was for win2000/XP Canon U.S.A. : Support & Drivers : GP200 you may be able to try to install these drivers in compatibility mode

9 more replies
Answer Match 48.3%

Have just got new computer running XP Home Edition.Printer is a Canon LBP-660. Downloaded driver from Canon website but it will not load as the error message states that I need to be using Windows 95 or 98. Yet it worked on my old computer running XP pro. Is there another compatible driver I could use? Any help greatly appreciated.
 

A:Canon LBP-660 driver

Have you tried the Windows 2000 drivers: http://software.canon-europe.com/so...ndows_nt_40__2000_r112s4954.asp?model=LBP-660
 

1 more replies
Answer Match 48.3%

Hi, I just purchased a Flex 3-1120 with Windows 10 preinstalled via Lenovo.com. When I try to use the Lenovo OKR to restore the system back to the orginal state, it takes to the Windows 10 recovery options. Is this correct? Will the Windows 10 receovery option restore everything including the Lenovo preinstalled programs/apps? Thanks for your assistance!

A:Flex 3-1120 Windows 10 OKR

Iam not sure if it will restore lenovo pre installed apps but it will restore windows 10 completely......  RegardsKamal



Ask any questions or Doubts,Always ready to help.... Dont forget to click kudos if i have helped you

1 more replies
Answer Match 48.3%
Answer Match 47.88%

I just got an HP with Vista x64 and Canon do not offer the right driver for the MF 3110 yet. Anyone know of a fix for this problem. We have 2 of those printers in the office and i cant use them. Thank you...

More replies
Answer Match 47.88%

Hello, I have Toshiba Satillite laptop with 32 bit Vista. I tried to uninstall my Canon MP160 printer driver and install it again. It said I have a printer drive installed. I cannot find a printer in Control Panel. So, can someone tell where I can find the driver and delete it?
Thanks, alanrr

A:Canon MP160 driver

Hi welcome to the forum.
I am unsure why you cannot find. I press Sart > search box type printer > press enter , I have a full list of things
that are on the computer re: printers.
Control panel > I have printer, on others it's devices & printers.
If it is not under category in control panel, I would assume not installed properly.
Sorry, maybe more info is you have, what's on screen, error messages etc?

4 more replies
Answer Match 47.88%

i have win xp and my printer does not work with it. I have tried many drivers but none work. I tried downloading the windows 2000 driver and then running bjc the printer angel but my trail for printer angel had expired. Where can I find a working windows xp dirver for canon bjc 5100?

thanks
 

A:Canon bjc 5100 driver

XP doesn't list it in it's normal set of drivers? Odd!! Try a Canon driver for a printer that is similar to yours in the defalt set of XP drivers. If you don't see an XP driver on Canon's web site they don't have one.
 

2 more replies
Answer Match 47.88%

Hi sorry for probably another printer issue but this one is a little odd.

I have a canon pixma ip3000 and when i installed it on my W7 64, windows update found it and made it work...great

Problem is my dad is having the same problem with his newer canon pixma ip4500 except windows update isnt finding a driver for it.

The canon site only has this add on driver for some maintenance utillity but doesnt actually have the main driver ! so how can we get this newer model working ?

Thanks for any advice

A:Canon driver not found with W7 ?

Download the Vista driver from Canon. You may have to install it in Compatability Mode.
If you are using Win 7 64bit get the Vista 64bit driver. Win 7 32bit get the Vista 32bit driver.

Here is the tutorial. Option One or Two.
Compatibility Mode

There are no Windows 7 drivers.

Mike

9 more replies
Answer Match 47.88%

I am looking for a XP driver for the Canon BJC5100 printer. I have seen on the canon site that they don't exist, but I didn't know if someone might have one by now. Some say that a 2000 driver will work with some tweaking but I don't know how to tweak it. Any help would be appreciated. Thanks.
 

A:Canon BJC5100 driver

Hi gobblerhuntr,
Try here !
 

1 more replies
Answer Match 47.88%

I can't find the driver for the Canon MF8000 printer on Windows 8.1? Can someone help me?

A:Canon MF8000 Driver?

Don the Canon site is a bloody nightmare I just need to know where you are because searching is asking me for country etc etc and I saw you results were in some language I don't know.

9 more replies
Answer Match 47.88%

I notice that there are a number of posting in regards 64-bit drivers for Canon printers but no other posting for the Canon LBP 5100. I purchased this printer around 12 months ago and simply love it, mainly due to the auto duplex that make printing out PDF such an easy task.

I intend building a new computer in the coming months and have more or less decided on installing Windows 7 Home Premium or Pro (Retail) 64-bit. The only major problem I can see with the 64-bit is with the Canon Printer LBP 5100, the canon website shows a 32-bit driver for Vista but no 64-bit versions. Contacting Canon NZ I received a reply stating that as far as they can ascertain there will be no 64-bit drivers for this printer unless Canon Japan decides different.

Questions please: I have been told that Windows 7 will come with a driver for the Canon LBP 5100 but can't find any information in regards this, so my question is does Windows 7 come with a driver for this printer?
If it does will the auto duplex still work?

Anyone knows how to contact Canon Japan (in English) about a 64-bit driver for this printer?

Had anyone that uses this printer come across a work around for a 64-bit driver for this printer.

A:Canon LBP 5100 64-bit Driver

Their is a similar post above yours for the lpb 5000. And from their question I can ascertain that windows 7 doesn't come with a driver for your printer since they can't be theirs to work. Even if W& did cone with a driver it would be a printer driver (just basic ) and most likely wouldn't include the applications needed for duplex. Sorry but after 7 is released on the 22 nd maybe with enough inquiries cannon will get with the program. But from their point of view i assume they would just rather sell you a newer model printer. Fabe

9 more replies
Answer Match 47.88%

Does anyone know where I can get a driver for a Canon BJC 5100 printer.
I seems that Canon themselves do not and will not supply the driver for this printer to operate in Windows XP.
 

A:Need a Driver for Canon BJC 5100

7 more replies
Answer Match 47.88%

Hi!

I have one problem. I have Windows 7 RC (build 7100, 64-bit) as my primary (only) OS. Everything works just fine but i have one "little" problem.
I have Canon Lide 60 scanner and its not working completely. I can scan winth CanoScan Toolbox but i can?t access scanner settings under control panel. And i can?t import/scan directly through Photoshop.
I just receive error message about WIA driver.

Here is screen:

I get this message when i am trying to double click on icon in control panel or in photoshop.

Any idea?

BTW: in Vista 64-bit this scanner works good.

A:Canon Lide 60 - WIA driver

Look in your old Windows VISTA/Windows directory for a file named twain_32.dll and copy it to your Windows 7/Windows directory.

Worked for me so I wish you same luck.

9 more replies
Answer Match 47.88%

Hi,

I uninstalled my Canon iP3000 software, and then when I tried to reinstall it, it got to a stage in the setup process where it asks you to connect the printer to the PC. But where the PC would normally detect a new hardware device, it didn't. My guess is that the driver wasn't uninstalled, although when I look under drivers, I can't see anything under Canon. (I have Windows XP pro). The installation cannot proceed without this, and the computer doesn't detect the printer.

I had originally installed the printer software with Ashampoo, so I used that uninstaller to uninstall, but it seems even that didn't detect everything.

Could anyone offer me some advice?

Thanks!

Peter
 

A:Canon driver problem

13 more replies
Answer Match 47.88%

i have a canon i320 printer....i lost the disk to install it....anywhere ican dl the driver
 

A:canon i320 driver

http://www.usa.canon.com/consumer/controller?act=SupportDetailAct&fcategoryid=232&modelid=8045
 

2 more replies
Answer Match 47.88%

Hello! I hope this is where this goes, If not I apologize.
I just got a Canon PIXMA Mg5422 and I have already set it up with my router and iPhone and it works just fine. I put the disk in my laptop (HP G60, Windows 7) and everything is fine. I'm a little confused though, the current installation step I'm at is a "Software Installation list". The software that ARE checked is MP drivers, On screen Manual, My printer, My image Garden, Quick Menu, Adobe RGB (1999), and Easy web-print EX. The bottom software is ''XPS driver'' and it is not checked...Do I need to check this or not? I currently don't own a camera to go with the printer (such as a canon) but I do hope to be buying a camera in a few months (not sure on brand). I'm not really sure what XPS driver means. Please help! Thanks.
 

A:XPS driver Canon MG5422

No, you don't need it, its optional.

You can read up more on it on Wikipedia: http://en.wikipedia.org/wiki/XML_Paper_Specification
 

1 more replies
Answer Match 47.88%

Canon does not have drivers for Picma MP450 Vista. Does anyone know where I can get drivers for the MP450 product for Vista? Thanks, Charles

More replies
Answer Match 47.88%

Need driver for canon LBP 1210 windows 7 x 64bit. Any ideas?

A:Canon LBP 1210 driver

Try here:

Laser Shot LBP-1210

4 more replies
Answer Match 47.88%

I have a Canon BJC 4400 bubble jet printer that was given to me. I downloaded a driver for it (version 3.97) but when I try to install the driver a window comes up entitled "Extraction Progress" and extraction completes and then a window comes up saying "Canon Information", "all items were successfully extracted." I click OK and the next window that comes up is entitled "Readme-Notepad" in which information about things such as installation but when I close that window nothing else happens, it goes back to my desktop. I'm using Windows Me. I downloaded a driver for the same printer for my laptop which has Windows XP and it installs without any problem. All steps for adding a printer were followed. Version3.97 is for Windows 3.1, 95, 98, and Me. Any help would be appreciated.
 

A:canon bjc printer driver

is it just extracted into a temp file and then waiting for you to install
post the link to the driver page and I will have a look
 

1 more replies
Answer Match 47.88%

Just bought a new computer with windows 7, can't get Canon multipass F50 driver to download. Apparently there is an incompatability issue between the two...Who's at fault here and what can I do about it? I need the printer and can't afford a new one and I've given away the old computer. Help!
Does Canon need to update their drivers or can Windows 7 OS come to my rescue?
Should I expect an update from Canon?
Thanks for whatever help you can give.
Dave

A:canon multipass f50 driver

Well it would seem they haven't offered support since Xp. The only choice you have is to try and install the XP driver in compatibility mode.Support - Color Bubble Jet Printer - Copier - Scanner - Fax - MultiPASS F50 - Canon USA Consumer Products To install in compatibility mode follow this Compatibility Mode . Fabe

2 more replies
Answer Match 47.88%

I have a Lenovo Flex 3 1120. When I bought it, I went for the hard drive option that had the cheapest price since all the other options were HDD of various sizes and I knew I was going to upgrade to SSD anyway. The flex 3 I have though, does not have a HDD and uses an eMMC embedded storage. When I went to install the SSD, there is an empty space for where the hard drive would sit and there is no SATA connection. There is a socket in the board that is labeled "SATA conn1" but no cable.
 
I called support and was told it is possible to use the SSD and boot from it. The cable and caddy can be purchased but she said Lenovo will not supply the part. I found the part number I think,  1109-01051, but apparently no one else sells it either. There was one on ebay, but it's gone. anyone know where I can find one?
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

A:Flex 3 1120.- No SATA connection!

update: the item number is actually 5C10J08424. I still had a hard time a seller with it in stock. One website wanted about $70 for it not including shipping. I finally found/bought one on encompassparts.com for about $20 including shipping. I'll update once I get to try it out.

8 more replies
Answer Match 47.88%

Dear All,

My printer is flashing a message No Print Cartridge.But Catridge is already there and properly
installed.

Please assist its urgent.
Rgds,
aligahk06
 

A:Top Urgent Printer HP laser jet M 1120 MFP

Please dont double post, it annoys the moderators . Is it possible to remove the cartridge and then put it back, making sure its in firmly. Ensure its in exactly the way it should be. Is there a bit of covering tape left on the cartridge?
If that fails, Canon customer services.
 

1 more replies
Answer Match 47.88%

Dear All,

My printer is flashing a message No Print Cartridge.But Catridge is already there and properly
installed.

Please assist its urgent.
Rgds,
aligahk06
 

More replies
Answer Match 47.88%

Computer sees external drive, but the drive does not receive info or data

A:Can you use USB 3.1 with a Pavilion Slimline Model S5-1120, ...

Hi there @JPMESQ, I hope you find your Support Forum experience a positive one! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that you have a question about USB compatibility. I am happy to help with this. According to the USB 3.1 specification, which is referenced here: USB - wikipedia.org, "The USB 3.1 standard is backward compatible with USB 3.0 and USB 2.0." So in terms of the connection it should work, but the performance will be limited by the slower standard. It is possible that some devices using USB 3.1, may not themselves not be backwards compatible, but that would be a case by case issue. I hope that addresses your question, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

1 more replies
Answer Match 47.46%

Hello,

I'm new in this forum and like to ask, if someone have a solution for my driver problem.
I've got an old Canon S520 printer and i am not able to install any driver on my Windows 7 64bit.
I searched the inet for a solution, but can't find one.
And sorry, if my English isnt't that good.

Thanking you in advance.

A:Canon S520 printer driver

Support - Color Bubble Jet Printer - S520 - Canon USA Consumer Products

Use the Vista driver.

5 more replies
Answer Match 47.46%

I could not get for W7 x64 the WIA driver for a Canon PowerShot SD880 IS.
Any help?

A:WIA driver for Canon PowerShot SD880

Try here:

PowerShot SD880 IS Digital Camera

1 more replies
Answer Match 47.46%

Recently purchased a new laptop. During installation of above printer I received a message that I should contact Microsoft for a new scanner driver for the printer. Have looked everywhere on Microsoft website without any luck in finding a driver for Windows Vista Home Basic operating system.

Can you help?

Thanks
Judy
 

A:Canon Pixma MP 150 Printer Driver

Here is the correct web page for printer driver download
http://software.canon-europe.com/products/0010247.asp

If you have any problems with regards to conflicts etc just come back to this same thread and most folk will be able to assist further.
 

1 more replies
Answer Match 47.46%

Hello, need help!

I have a Windows 7 64-bit PC. I have downloaded the S820 driver from Canon's site, but it keeps failing on me. The PC recognizes the printer, but as an USB device. It won't let me print to it. It only gives me 3 options when I right-click on the printer - Create Shortcut, Troubleshoot, Properties.

I was told the INFCache.1 file was causing issues with USB devices. I went and deleted that file, unplugged the USB plug, reinstalled the driver, plugged it back in. It recreated the INFCache.1 file and it tried to install the printer, but it failed.

I thought it was a compatibility issue, so I tried the XP driver, Vista driver, etc. and none of those worked.

I haven't worked with Windows 7 much, so Windows 7 gurus, please help out a n00b.

Gracias in advance.
 

A:Canon S820 Driver Issue

Bump, anyone?
 

2 more replies
Answer Match 47.46%

Hi all, I'm currently having the Canon ip1600 printer and is unable to detect the printer (using Windows xp os). I manged to find a driver on Canon website, but when it comes to the installation part where they state that I'm supposed to plug in my printer and on it so that It can detect the port, it doesn't and it just stuck at the screen. I tired restarting com, offing and on the printer again, but everything won't works. Any help will be greatly appreciated. Thanks!
 

A:Canon Ip1600 Printer Driver

You appear to have a Canon PIXMA iP1600 printer.

Here is the Email support site for it.

Here is the phone support site for it.

-------------------------------------------------------
 

1 more replies
Answer Match 47.46%

Dear respective team,

I am trying to install Canon LBP 1210 printer in Win 7 64 bit. I have searched driver in vendor site but was not success to get. Is there anyway to install above printer in 64 bit platform.

Your support is highly appreciated.
 

A:Canon LBP 1210 driver for win7 64 bit

check here this is the only one i can access from the canon site

http://support-au.canon.com.au/P/se...download&filter=0&tagname=g_os&g_os=Windows 7
 

3 more replies
Answer Match 47.46%

Hey,

Just after some help with the MP780 on 7 x64.

The printer is plugged in via USB to another machine on the network. On the 7 machine I am running through the add printer wizard, which finds the printer and looks for drivers.

The first problem is that it can't find the MP780 drivers on Windows Update, which I think it should.

After it fails there, it asks to find the inf manually. I have downloaded the drivers from the Canon Australia website but that's just an installer. I have also downloaded drivers from other random driver sites but it just gives me fax and scan infs, nothing else.

Any ideas for me?

Cheers

A:Canon MP780 Driver Issue

OK if you can install this it might work - make sure the driver package is unzippped to a folder - or just select the setup.exe file and do the following if it wont unzip - this resolves an OS mismatch when the driver wont install on w7

To install a driver OR program in compatibility mode - right click the setup.exe file - click properties - click compatibility - check run in compatibility with vista/xp etc - check run as administrator - leave the rest blank. Start setup.exe and install.

Driver page v6.20 - to download firstly click on the file, go to nxt page then - under disclaimer is download - select "i have read the instructions etc" then select download -in "red" and then click save
Canon&

If that doesnt work try installing it thru device manager and pointing to the folder the driver is unzipped to.

9 more replies
Answer Match 47.46%

Can't get my Canon mono Lasershot lbp3000 to install, as WIN7 says driver(vista) not correct version of OS. Any ideas or workarounds that others have used to install Vista drivers on 7, until Canon get to writing 64bit drivers for 7? I have searched for the drivers on MS site but cannot find any.
Printer is usb and shows up in control panel as "UNSPECIFIED(1)- Canon CAPT USB Device".
My setup is Intel Core2quad [email protected], Asus p5q-em mobo, 4Gb 800MHz ram, 300Gb SATa Samsung HDD, onboard graphics.
My XP driver for my Canon MP520 printer works fine.

A:Canon LBP 3000 64bit driver? Help please

I'm much in the same boat as I own the same printer... Such a shame to actually have to throw it out and upgrade to something that's running compatible drivers as it's a great little printer.

Anyhow I don't like your chances of waiting for Canon to release 64bit drivers for the LBP3000. - Windows 7 support most likely won't exist either.

9 more replies
Answer Match 47.46%

Have a new Vista 64 Home Premium machine. Have a Canon i950 printer on my XP machine. Canon does not have a Vista driver for the printer. In these forums, found a post explaining there is a "driver add-on" that makes the i950 driver work in Vista.

Obtained the add-on. It requires that the "base driver" be installed (B3319MUX.EXE). When I run the driver's setup program, get "The Printer Driver Has Not Been Installed" message at the 60% completion point. Have tried the install in compatability mode and "run as administator" (Both XP and 2000), but get the same message. I am also logged in to an Administrator account.

Does anyone know of a way to get the base driver installed on Vista 64? Thank you.

A:Canon i950 Driver Will Not Install

Have you followed the instructions on installing the add-on module?

Canon i950 Printer Driver v 1.00 Add-on Module for Windows Vista - TechSpot Drivers

6 more replies
Answer Match 47.46%

my printer driver has somewhta been deleted of my computer and i need another one. Plz someone tell me where i can downloads a working windows xp driver for canon 5100 series printer.

thanks
 

A:BJC canon 5100 printer driver

7 more replies
Answer Match 47.46%

I just upgraded my home network to a wireless system. I'm running XP Pro on the computer hardwired to the Canon Multipass F50. My laptop is running XP Home and networked via wireless. All aspects of the network operate perfectly, file sharing, internet access, etc. The add printer function allows me to find the canon over the network, I have the driver installed (because I've been using the printer in a networked (shared) mode prior to going with the wireless router. Now when I attempt to print I get an error message that states: "Failed to open printer" Canon's website simply states that there are no drivers for XP to allow for sharing this printer.

Wonderful!! Anyone have a workaround? It used to share until I went wireless.
Dan.
 

A:XP printer driver for canon multipass f50

It almost sounds like there's a permission problem with using the printer with the laptop. Try going to the printer properties on the machine that the printer's connected to. Go to the Security tab and make sure that your laptop login computer name is there and all of the permissions in the ACL list are checked. You could also try going to Network Neighborhood, go to the computer that has the printer connected and try to connect to the printer through there.
 

1 more replies
Answer Match 47.46%

After six working days of jumping through hoops, I have finally managed to install a brand new Canon LBP6650dn.

If anyone else is thinking of buying one in the UK, note that

(a) the supplied software disc is only compatible with Win 7 32bit

(b) Canon UK online and telephone support were basically no help and the drivers on the UK site do not work

(c) via a contact in Canon UK, I finally figured out the answer.

What you do is go to Canon U.S.A. : Consumer & Home Office : imageCLASS LBP6650dn
and follow the instructions.

This will install the printer as an "unspecified USB device".

Right click on that, run Windows troubleshooter, and when it tells you that the driver is missing, click on "Fix this problem".

Everything will then be sweetness and light - at least until you try to override the printer defaulting to single-sheet feed. But that's another story (which as yet has no end) ...

A:Canon LBP6650dn driver saga

  
Quote: Originally Posted by danfoto


What you do is go to Canon U.S.A. : Consumer & Home Office : imageCLASS LBP6650dn


Which driver do/did you use? There are 3 there and they all have this note...






Quote:
Before starting the driver installation, connect only the LAN cable first, do not connect the USB cable at this time.
This is necessary for your printer to acquire IP address automatically before you start the driver installation and enable driver installer function.

7 more replies
Answer Match 47.46%

Canon Scanner 4200F;OS Windows 7 (64)Downloaded, from Canon site, the CanoScan toolbox AND the 64 bit driver.Both installed correctly and are recognized by the system.When I tried to scan, using the toolbox, the Scanner lamp goes on but the scan will not initiateand the error "Cannot communicate with the scanner - check cable and connection."Changed USB ports - same msg.reloaded drivers - same msg.Canon help claims that the problem is that the OS is "blocking the Communication"Q:  If this is true how do I unblock?

A:Canon Scanner driver problems

The issue IS that although the Canon supplied driver for the 64 bit Windows 7 OS loads the WIA driver is required for the scanner to operate.  The WIA driver that came with the 4200F is 32 bit and will not load.Contacted Canon support and finally got them to understand the situation.The outcome is that they are sorry for the inconvience - BUT there is no 64 bit WIA available.Looks like the only solution is to purchase a new, compatable, scanner.Canon won't get the business.Thanks to all.

19 more replies
Answer Match 47.46%

I pulled an old printer out of the closet to use on a new PC that I am building...just to have a printer connected to it. It doesn't work with the print driver provided with WinXP and Canon no longer supports it. Does anyone know where I might find a print driver for it. It prints test pages very nicely.
 

A:Canon BJ-200 Print Driver for WinXP?

7 more replies
Answer Match 47.46%

I have a custom made computer Win 7 -Home Prem 64

My regular HP printer broke down (but was working wirelessly just fine)

So I want to substitute an old Canon Fax Phone L80 I have that worked OK on a Vista OS (another machine)

The system "found" the L80 as I plugged it directly into UBC

Says driver not found.......Win couldn't find one automatically and I have no disk

Manual downloaded a driver from Canon....I have no idea how the particular driver arrives and what file it is supposed to download to, maybe that's my problem,

Still can't find driver by hitting Add New printer.

Help file was incorrect, as to what tabs would appear when trying to manually download

So even though the L80 shows up in "Devices & printers" I can't get the driver driving!

What am I missing.........any ideas?

thanks in advance if you can give me a clue


Dick

A:Canon FaxPhone L80 driver won't connect

Hi Welcome to Seven Forums .. You problem would seem to be there is no 64 Bit Driver ..

1 more replies
Answer Match 47.46%

Hi folks,

Her indoors is not happy!!

I have converted her Lenovo laptop into a dual boot (XP/7 32-bit) - the intention being to get everything she uses onto 7 and "convert her" to 7 too

In XP she has been happily using her wireless connected Canon MG6150 and was comfortable with its scanner driver (Scangear).

In 7 I located the printer on the network and Win 7 got the driver for it. The "printer side" of the driver is fine but the "scanner side" is very minimal (it's a WIA rather than TWAIN) and she's not a happy bunny.

Should I remove this printer and start over, using Canon's own software? Bearing in mind that this printer is already wirelessly connected, what's the best procedure - install the software first from Canon's site and then connect the printer? If so, how do I stop it from searching Windows Update for a driver?

Regards

John

A:Driver for Canon MG6150 scanner

Just to let you know, I removed the printer, downloaded the Canon software and driver, re-installed and I have a happy wife now

John

2 more replies
Answer Match 47.46%

I have a Canon Scanner "CanoScan N1220U" that I used on XP.

Looking to get it to work for W7 46-bit.

I tried the XP driver, and it says it successfully installed but, but then a pop up comes up and says:

LaunchAnywhere GUI has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify if a solution is available.

A:[need driver] Canon CanoScan N1220U

ok I got the driver to install and now the computer knows it is there.

But now Photoshop (CS4 64-bit) does not list the scanner when I go to file import
(like it did when I had XP and Photoshop 7)

I tried using the install disc that came with the computer, but it says it is not compatible with my OS.

I did install VueScan 8.5.37, but I have to scan in the program, save it, then open the file in photoshop. I'd rather just scan right inside photoshop.

9 more replies
Answer Match 47.46%

When I attempt to scan a document, the canon dr-2010c pulls it in half way then stops. It freezes and nothing else can be done. If I cancel and try again, an error message tells me the driver is busy. I have also gotten an error that the device cannot be locked and another program may be trying to use it. I do not have any other scanning software on the computer. Could this be a port problem? maybe the scanner is sharing a port with something else?? I have a HP deskjet and an Okidata printer installed, but they always work fine. I dont know what is causing this conflict. any ideas???

Thank you
 

More replies
Answer Match 47.46%

I purchased this computer on Sept. 2,2016 and I had the geek squad to transfer my files from my old computer to the new one now my canon imageclass 4150 will not print. I have tried several options to get the driver and it says driver unavailable. I don't
feel I should purchase a new driver. Any help with FREE download for this driver would be appreciated. thanks wvlpninwv

More replies
Answer Match 47.46%

I have changed my PC and need to re-instal my scanner driver. However I have mislaid my English disc and only have the German/Dutch one. I have downloaded the English driver tb4135-en and it is on my desktop. I am at a loss how to instal it and use it. Can anyone please help?
 

A:Canon LiDE 30 scanner driver.

What you need to do is download the latest ScanGear ("LiDE 30 Scanner Driver Ver. 7.0.3.1a") software package.

http://www.usa.canon.com/consumer/c...loadDetailTabAct&fcategoryid=351&modelid=6623

The Windows XP driver that I downloaded for the Canon LiDE 30 is called lide20lide30n670un676un1240uvst7031a_xpen.exe. I don't see where you found the file called tb4135-en.
 

1 more replies
Answer Match 47.46%

When I downloaded the driver from Canon for this printer/copier, it wouldn't work on my 64 bit OS. Canon support confirmed that there is no 64 bit driver and no current information about whether they will offer one.

Any suggestions about alternate ways to get this printer to work? I didn't realize that the Vista driver would only work for 32 bit, grrr.

Thanks in advance.

More replies
Answer Match 47.46%

It's on the list of supported scanners for VueScan, which works without
requiring there be good Windows drivers installed.
http://www.hamrick.com/

It worked for me on Vista 64. You can try it free before paying for it. If you like it you can decide whether to buy the program or use the money for a new scanner. You don't need a driver for the Lide 30--this program does it all.

A:Canon Lide 30 driver for Vista x64

But I don't feel I should have to pay for a driver for the $80.00 scanner I just purchased a year ago (Yes, I got ripped off)

3 more replies
Answer Match 47.46%

Microsoft tells me that the Canon Selphy CP730 photoprinter is Windows 8.1 compatible, but where do I get a driver? Canon don't have it and Microsoft don't have it. Regarding to Canon is the printer only Windows 7 compatble. I use Win 8.1 64 bit.

Peter.

A:Canon Selphy CP730 driver?

This Canon page says Win8.1 drivers are NOT available for the printer:
Canon U.S.A. : Support & Drivers : SELPHY CP730

2 more replies
Answer Match 47.46%

Does anyone know of a 32 bit driver for a Canon 9900F Scanner?

A:32 bit Driver for Canon 9900F Scanner

  
Quote: Originally Posted by Grizzledsourdou


Does anyone know of a 32 bit driver for a Canon 9900F Scanner?


Hi Grizzledsourdou , Welcome to the forums, Unfortunately there is no Win7 driver for your scanner , download the vista driver Canon CanoScan 9900F Scanner Driver Download | All Drivers ? Windows XP, Vista, 7, Sound, Printer, Scanner, USB, Laptop Drivers Easy Download and install in compatibility mode Compatibility Mode

2 more replies
Answer Match 47.46%

I've searched this online, but I haven't found a solution that works.

Basically, I have a Canoscan FB 320P Scanner, and no installation disk. I've downloaded the drivers from the Canon website, and a few other places. Anytime I try to scan anything, I get a common error message, that reads, "The parallel port may be used by another application 0x00060800"

I also have an HP Deskjet 695C connected with the scanner.

Then it tells me that it can't find the Twain source, to re-check the connection, and try again, but to no avail.

I want to get it so that at least the scanner shows up in the control panel under installed imaging devices. I tried going into the control panel, and adding a new imaging device. It always searches for an .inf file -- is that what I'm missing? Any suggestions would be appreciated.

Windows OS: XP SP2
Dell 3000 Pentium 4.
 

A:Help with Canon Scanner (Driver issues)

10 more replies
Answer Match 47.46%

Anyone aware of a fix so that windows 7 64 bit can install and use caroscan 5000f flatbed scanner?

A:canon carascan 5000f driver

I just checked here - Film and Negative Scanners - USB Flatbed Scanner - CanoScan 5000F - Canon USA Consumer Products and see there are no Windows 7 drivers for that scanner

You could try Vuescan from Hamrick if you don't find a suitable solution. The software allows you to use your scanner on a 64-bit OS through its program by providing its own 64-bit driver. It usually offers more options and tweaks over the standard software issued with the scanner. The downfall (if you want to call it that) is it will set you back $40.00 for the Standard edition or $80.00 for the Pro edition. There is a 30-day trial version as well.

List of supported scanners - VueScan Release Notes

1 more replies
Answer Match 47.46%

I have a Canon i9100 printer which worked great through XP, Vista and Win 7....Canon provided updated drivers.. However, for 8.1, Canon does not provide a driver for this printer. Is there another source which makes a generic driver for this printer so it does not become obsolete?
 

A:Solved: Canon Printer Driver For 8.1

The below image shows the list of compatible Windows versions for the Canon i9100 printer.

Unless Windows 8.1 provides a built-in generic driver for it, you're probably out of luck.
 

1 more replies
Answer Match 47.46%

Is there any way to install printer driver (i have canon mp250 and i have its cd driver) without having the printer around?

A:Canon printer driver installation

Hi,

This tutorial might help: http://www.ehow.com/how_5925020_install-printer-driver-printer-connected.html

4 more replies
Answer Match 47.46%

Hi,

Does Anyone Know If There Is A Driver For Canon Powershot A550 Working
Under Windows98 Se Platform.

Alternatively,if There Is Any Driver Which Will Connect The Camera
To The Computer And Make It As A Drive From Which I Can Download Pictures

Thanks,
Marco
04/04/2007
 

A:Canon A550 Windows98 Driver

7 more replies
Answer Match 47.46%

I have Windows 7 64-bit on my pc,I went to the Canon website and they have no drivers for the Canon 5000f scanner running
Windows 7 643-bit.
Is there another website where I can find the correct driver?
 

A:Driver for Canon 5000f Scanner

this says the driver is built into windows 7 or not needed

http://www.usa.canon.com/cusa/suppo...scan_series/canoscan_5000f#DriversAndSoftware

what happens when you connect the scanner - whats listed in device manager

have you installed any of the utilities that came with the scanner

whats on the included
CanoScan Setup CD-ROM
 

1 more replies
Answer Match 47.46%

I bought this printer for a buck at a garage sale. They claimed it worked, but had no ink. I paid around twelve dollars for the ink cartridges on ebay, but forgot to check first to see if Canon had a driver for xp. They don't. However, when I go to microsoft's printer support page, I find that printer listed as one that there are drivers for in xp. http://support.microsoft.com/?kbid=293360

The question is--should I assume Microsoft is correct, or assume that my printer won't work and just get rid of it?

Shane
 

A:Question on driver for Canon printer (BJC-620)

I would go with the Win98 drivers they have listed on Canon's website. If microsoft has drivers for XP, try them first. The worst that can happen is that it won't work.
 

2 more replies
Answer Match 47.46%

Hi All-

I've got a Canon D661 connected via USB and I have been looking for a compatible driver for Windows Pro 64 bit. I'm not sure if this is possible, but if there is another driver that would just get the printer to print, that would be great!

Thanks in advance!

A:Canon Imageclass D661 64 bit driver

Hi ShantiK1, Canon tells me there are no 64-bit drivers for Win 7 64 bit machines (only 32 bit). the only thing I can suggest is running XP in virtual mode Windows XP Mode - Install and Setup this way you will have a working printer

2 more replies
Answer Match 47.46%

Greetings.
I have an English Windows 7 Ultimate SP1 DVD. I have installed it, and after that I installed my own language (danish), and that went fine. I have allso learned how to make the start- and shut down screen in danish.

For my printer (Canon MG6150) I can only find a multilanguage driver, and allthough Canon support danish languane, I can only get it to show printer properties and maintenance in English. Anybody knowing a trick to make the driver install the driver so it will be in danish?

TIA

A:Canon driver only install in English?

Thank you. I did not know this with the ABOUT-button. You learn every day

1 more replies
Answer Match 47.46%

Hi All
I have been trying to install the drivers for the above printer without success.
OS: W7/32,firewalls and antivirus disabled
Versions tried:
here and here the add on module.
Has anyone of you come across this problem?

Thanks

A:Canon s6300 driver problem

Hi all
I just had to go through and w7 found it and all is sweeet!

1 more replies
Answer Match 47.46%

I recently bought a new PC (O/S: Windows 7) and now it appears that there exists no 64 bit driver for my printer/scanner/fax Canon MF4690PL. Maybe I overlooked? Are there other solutions? Thanks!
 

A:Windows 7 x 64 driver for Canon MF4690PL

Try the Vista driver here: http://software.canon-europe.com/products/0010463.asp
 

2 more replies
Answer Match 47.46%

Hi All,

This is my first post!

I am looking for drivers for Canon L170 Fax/Phone. I have contacted Canon and they said they didn't have anything that will work. I found a post on this forum that says a driver was found, but the post is closed and there is no link or reference to exactly what driver worked.

The thread is closed. The user that posted the question is Sauranan. The thread was closed on 12-May-2009. The title is "Canon L170 FaxPhone Driver Issue"
 

More replies
Answer Match 47.46%

I have recently bought a new base unit with Vista Home Premium 64bit installed. I have loaded all the software that came with my Canon 350D camera but Vista says it need to install new divers for a Canon Digital camera when I connect it via USB. It can not find any drivers on the install disc and recommends I install drivers for a "EOS KISS_N REBEL_XT 350D". I have checked the Canon website for the drivers and found no reference to the recommended drivers? I have found update for the software that came with the camera which I have applied but it still says it's found new hardware when I connect the camera.

The current versions of software installed are:
[IMG]file:///C:/Users/Personal/AppData/Local/Temp/moz-screenshot.jpg[/IMG]Digital Photo Professional ver 3.0.2.6
EOS Utility ver 2.0.2.6
ZoomBrowser EX 5.8.0.74

I have done a google search which brought up several sites none of which appear to work.
Can anyone point me in the right direction to get this working.

A:Canon 350D driver problem.

Hi Blakey,

I do not know if you have this one or not, but I found this at Canon:

http://software.canon-europe.com/products/0010192.asp

1. Canon Camera USB WIA Driver for Windows Vista (6.0.0)

Compatibility:
Operating system(s): Windows Vista 32bit
Language(s): English

It says it is not compatible with the x64 Vista or x64 XP though, only 32 bit versions.

Sorry,
Shawn

12 more replies
Answer Match 47.46%

I have two laptops and a desktop to which the laptops are wirelessly connected. All are running Vista 64 except the one laptop which is running Vista 32. The MP530 is USB connected to the desktop. I can print from the desktop just fine and, until a couple of days ago, I could print from both laptops. One laptop seems to trigger a failure of the driver to work on both the laptop and the desktop. If I restart the desktop the printer works fine until I try to print from the laptop. I have reinstalled the printer on the laptop and it prints a test page but nothing else. Any idea on how to cure this?
 

More replies
Answer Match 47.46%

I can't seem to get my Canon to install correctly on W7 x64. I've tried running the installer as Admin, without UAC, and in compatibility mode.

Any ideas how to manually install the driver as I extracted the driver files but don't know how to apply them.

Thx!

A:Canon MP780 driver install

Did you manage to start the mp navigator?

9 more replies
Answer Match 47.46%

Hi, I have a Lenovo Flex 3 1120 and am having trouble playing games on it so i was wondering if i would be able to ugrade my graphics card and what card would be compatible with it. The processor is: Intel Celeron CPU N2840 2.16GHz
RAM: 4.00GB
System type: 64-bit
Graphics: Intel HD
If you need more information let me know how and where to find it becuase i need help. Thanks! 
 
Mod's Edit: Additional information added to Subject line for clarity of issue.
 

More replies
Answer Match 47.46%

Hey i have a Dell Inspiron 1120 with win7 home premium and out of nowhere when i restarted it it said " a disk read error occurred" and to press ctr,alt,delete to restart the computer. since that didn't work i tried to re install windows 7 and my hard drive wont show up, and even when it does in the middle of the installation a error comes up that says something about the installation files missing i don't remember word for word but it was along the lines of that then when i restart again it says " BOOTMGR Missing" sorry if i left anything out just let me know what other info you need. Thanks

A:Dell Inspiron 1120 Boot Problem

Go into BIOS. Does the hard drive show up there?

7 more replies
Answer Match 47.46%

Upgraded to Win 10 with no problems, I found that touchscreen is available only at login screen. I can type on the screen the password to log in or swipe the login image, or press the shutdown button on the screen, below right, or change the login user on screen. But as soon as I'm in the desktop (or tablet mode, I tried it) the touchscreen is not rworking anymore. As far as I can see touchscreen works perfectly even if there aren't officially  the drivers available for my machine,  I just would like to know how the enable the touchscreen in the desktop mode following the login. Thank you. Enrico










Solved!
View Solution.

A:Touchscreen of Touchsmart 610-1120 works only at login

Well I found it: there is a key in the registry that enable/disable the touch screen. I just set it and now it works with no problem at all, nor the drivers have been changed.

6 more replies
Answer Match 47.04%

Hi all,

OK ... for a few days (maybe a week) now I have had trouble with my Canon MX870 Printer/Fax. I have been using it successfully for the past 16 months now, via USB connection, installed on both my Windows 7 laptop and my Windows XP PC (I just unplug it and plug it in to whichever computer I need to print from).

For some reason, it has decided not to recognise the drivers on my laptop. I have tried to uninstall and reinstall (no go). I also deleted every instance of MX870 from the registry that it would allow me to (some it wouldn't for some reason - no access - yes I am Administrator). Reinstall again ...still no go.

The Windows 7 Updates were failing to update the Fax component which I thought was the problem, then all of a sudden it was successful ... still no printer. Now, it is unsuccessful again.

But ... I don't use the Fax component ... never have ... with no problems for 16 months.

The reinstall from the CD is successful, but when I plug in the printer, it fails. "Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed.

CanonMX870 series ... Ready to use (with a green tick) ...
CanonMX870 series FAX ... Failed (with a red cross).

Oh, BTW, the scanner component works fine.

Also, each time I unplug then plugin the USB cable, it attempts to reinstall the device drivers, the printer successful, the fax failing. It never did this before when I was happil... Read more

A:Canon MX870 Printer - Driver Issues

Thats a long story. You might of already did this. Start and go to devices and printers. Make sure the printer has a check mark in it. That will make it your default printer. With the printer hooked up to your computer and powered up reboot your computer. Lets see if Windows 7 will pick it up or sometimes it will ask if you want to install the driver. Windows 7 comes with a lot of drivers built in.

7 more replies
Answer Match 47.04%

My canon printer isn't supported by Windows 10. Troubleshooting it just tells me there is no drivers. It prints fine, but i cannot use the scanner. Is there any way i can get the scanner to work, more specifically in gIMP?

A:Canon MP240 Scanner No Driver (Unsupported)

Check whether the Windows 7 driver will work. It might work, but no guarantee. Then see whether it works with Paint.

2 more replies
Answer Match 47.04%

I have Windows Vista SP2 32bit. Bought a new printer on the weekend but haven't been able to download the scanner driver. The printer works fine except when I click on the scanner button from the Canon software it says something like "no scanner driver is installed for this software". I've talked to Canon but after 3-4 hours of trying, they say that it's the OS and not the CD software. Something to do with USB port conflict. Any help would be appreciated. Thanks Gord

A:Canon MP480 printer driver won't install

here is a couple of links for the driver and software.

https://www.microsoft.com/windows/co...=all&os=64-bit - try this one first

Canon PIXMA MP480 Printer Drivers v 1.00 - TechSpot Drivers

? Download Canon PIXMA MP480 Printer Drivers v 1.00

14 more replies
Answer Match 47.04%

My Canon LBP-4 Lite Printer, which is not postscript instead of printing the (wysiwyg) test page prints only characters like [{[ ... and many @@@ ... . I wonder where to find a right driver for my Windows 2000 machine the only one I have with a parallel port able to communicate with that printer.

A:Driver Canon LBP 4 Lite Windows 2000

What country are you located in? What driver is currently in use? What service pack do you have installed for Win2000?

2 more replies
Answer Match 47.04%

I have lost my disc for my Canon PowerShot SD100 camera. I tried to install a driver but it doesn't work. I can't get the images off the camera. Does anybody have a driver that actually works right. Let me know! Thanks!
 

More replies
Answer Match 47.04%

I am using Windows 7 Home Premium 64-bit. I have a Canon LiDE 200 scanner with an older driver. I found a newer 64-bit driver on the Canon website, but after installing it nothing changes with the driver?it's still the same old driver I had before. I have tried uninstalling the scanner (in Safe Mode) and then restarting the computer, but it doesn't change anything. The new driver from Canon is just an executable and so it runs and installs itself somewhere, although when I check in Device Manager the old driver is still there.

I would appreciate any help someone could give me in updating my scanner to the new 64-bit driver.

Thanks.

A:Canon LiDE 200 64-bit scanner driver problem

I finally figured out how to scan my drawings/images back into PS. CS6 does not install several legacy (pre-CS4) plug-ins, extensions, and presets, including TWAIN. You can download the optional TWAIN plug-in at the Adobe website, for both Mac and Windows. For CS6, I placed the TWAIN.plugin file inside my Photoshop Plug-ins folder. Now if you have CS6 (on Windows 7) it comes with two versions of Photoshop—one is in the Program Files folder (64-bit) and the other is in the Program Files (x84) folder (32-bit). I opened Windows Explorer and navigated to the PS plug-ins folder in Program Files (x86), then I restarted Photoshop. Voila! Problem solved! I can now scan from my Canon LiDE via the PS File > Import menu.

3 more replies
Answer Match 47.04%

Hi Everyone,
I have bought a Canon digital camera (PowerShot SX10 IS). When I attach it to my laptop and turn it on, I get 'Installing device driver software' message. I then get the found new hardware window with 'Locate and install driver software (recommended)' option. After selecting this, it fails a minute or 2 later with 'Access is denied'.
I have been onto Canon who say the driver is already in Vista so its a microsoft problem.
Microsoft say as my laptop was pre-loaded with Vista then its down to Acer.
Before I have the joy of phoning Acer, I was hoping someone might know how I can sort this.
Thanks in advance, fitzsy
P.S. I have run several different Reg cleaners, no change. Also, I have a Canon printer (don't know if that's relevant!)
 

A:Canon driver on Vista - Access is denied

Sorry, forgot to mention, after my conversation with Canon I successfully attached the Camera to my daughter's laptop (Medion - also running Vista). As soon as I turned the camera on it loaded the driver with no messages coming up that needed a response. Thanks, fitzsy
 

2 more replies
Answer Match 47.04%

I just purchased a Canon Pixma MP600 Printer & cannot Install the Drivers.

I received a error message "Process cannot continue because the Print Spooler service has been stopped. Restart the computer to start the Print Spooler & try again." while trying to install the MP600 Drivers. No Luck.

I have logged on to XP SP2 in SAFE MODE as the Administrator as specified in the set-up instructions. I am the sole user on the computer, but set up 2 user accounts at set-up. Where do I go now?

Thanks for your repaly,

WASTECH....
 

A:Canon MP600 Install Driver Problem

7 more replies
Answer Match 47.04%

Hi, I'm having a problem with Canon iP6700D printer. When I plug in the printer, it searches Windows Update for the driver but it says that it can't find it.



So then I went to the Windows Compatibility Center (Windows 7 compatibility for Canon Pixma iP6700D Photo Inkjet Printer model 1441B002) to check if it was compatible. It says it is with a driver download from the Canon website, it provided a link to the iP6700D driver download page for Windows 7 (Canon U.S.A. : Support & Drivers : PIXMA iP6700D). But there it says I have to get the driver from Windows Update, but as I stated before, Windows Update can't find it. Each side in pointing to one another for the driver, but no one seems to have it. I tried using the driver for Windows Vista x64 and Windows 8 x64 but it didn't work. This printer works fine with my Windows 8 laptop, but I can't for the life of me get it running on Windows 7.

This is how it shows up in devices and printers:



Does anyone know what the problem might be? Any information in much appreciated.

A:Can't install Canon iP6700D driver on Windows 7 x64

Hi there ... Try the Link below

PIXMA iP6700D

8 more replies
Answer Match 47.04%

I have an older Canon imageclass d761 printer.

There are no 'official' x64 bit drivers on the Canon page.

Is there any way to use this printer with Win7x64?

A generic printer driver, or another model that is close?

My other printer, a MX850, works fine (Canon had x64bit driver)..

A:Canon x64 Win7 printer driver for d761

If your computer supports virtualization, use Windows XP mode. Even though my machine runs Windows 7 64-bit, XP mode is a 32-bit "machine" which is compatible with the printer.

I called Canon and was told to Google it. Nice support!

Anyway, printing works fine. I haven't figured out scanning yet, but hopefully will soon...

Hope this helps!

4 more replies
Answer Match 47.04%

I just purchased a new Vista Home version computer. I started downloading old software/updates/etc. I have a Canon imageClass D680 multifunction printer/copier [Canon PC1200 /iC d600/iR1200G] with the original CD but it is not compatible with Vista.

I went to CanonUSA website and downloaded their Vista version of the driver. NOTE: I have done this numerous times and saved it to several different locations [Program file folder in both Vista and one I created in my user "Program" folder] because Vista notified me that I did not have Administrator authorization - I got on line and learned how to disable the user limitation so I could have Administrator rights.

I have restarted my computer in both my personal user account and Administrator account over a dozen time in order to bring up the new hardware notification window and driver wizard. Since the cd version did not work, it prompts me to browse, I click on the corresponding folder, and then I get the same message EVERY time . . .

[paraphrased] "windows cannot locate the driver for the hardware, contact the manufacturer to get the driver."

You guys out there are more tech savvy then me - please help. I do not want to trash this printer/copier - it works great (it worked fine with my old XP machine just a week or two ago).

Is Vista that bad? (All my Canon printers and cameras have been great).
 

A:Vista does not recognize Canon printer driver

6 more replies
Answer Match 47.04%

I acquired a Canon CanoScan LiDE 25 from my sister, Windows update had no driver and the one from here on the cannon website don't work! where can I get a working one?Edit: Topic moved from Windows Vista to the more appropriate forum. ~ Animal

A:NEED Canon CanoScan LiDE 25 driver for Windows 7

dafuq?! how did this get put in "Windows Vista" when the topic was submitted to "Windows 7"??

2 more replies
Answer Match 47.04%

I'm trying to install a new driver for my Canon i560. When I click on the "Printer Driver Setup" I get the message: "C is not a registered protocol," and I can go no further. I have deleted i560 from my computer following the "uninstall" instructions on the setup page. That went smoothly. So, how do I respond to the "c is not a registered protocol" to start the installation?

Jerry
 

More replies
Answer Match 47.04%

W8 Release Preview 64 bit found my USB connected Canon Pixma iP5000 printer, but didn't install a driver. WU says there is an update available, but that will not install. Error is WindowsUpdate_80070BC8, which doesn't help much. I haven't been able to find a 64 bit driver on any of the Canon sites, but I have found an XP 64 driver, on another site.

Checking properties for this printer in Devices & Printers throws up the following event:?
Driver Management concluded the process to install driver prnca00m.inf_amd64_26559657092dd606\prnca00m.inf for Device Instance ID USBPRINT\CANONIP5000\7&8F48641&3&USB005 with the following status: 0xBC8.

This status code is listed as ERROR_CORE_DRIVER_PACKAGE_NOT_FOUND

Attempting to update the driver from the printer properties finds a couple of drivers, but they also fail to find a core driver package. Add printer wizard finds a compatible driver on my machine, but that also fails for the same reason.

This printer is installed OK on my W7 installation on the same machine.

The 64 bit XP driver installed OK on this W8 RP installation, and printed a file OK, but attempting to upgrade results in the same error. After installing this XP driver, WU reported that the update installed, but Update History shows 'Failed'. Now WU isn't offering the update.

TIA for any help.

A:Driver for Canon Pixma iP5000 printer

Does anyone know where I can get a W8 32bit driver for my Canon Pixma iP5000 printer? Canon just wash their hands of any responsibility.

2 more replies
Answer Match 47.04%

I have a PC running Vista HP/32 with a Canon IP4300 installed via USB, specified as shared. No issues on that PC.

I also have a new laptop with Win 7 HP/64 which when we try to add the printer it can see the the printer, but says it can't find a driver. When we direct connect the IP4300 to the laptop, it installs the driver fine (driver is embedded in Win 7 so no disk is required).

When we put the printer back on the Vista PC, and try to add the IP4300 again as a network printer it continues to say it can't find a driver.

All other network aspects, sharing files/folder between the 2 pc's, are working 100% okay.

Is this because win 7 it trying to load a Vista driver? Can we load the driver manually, if so, where can we find the driver?

thanks for any advice here.

A:Canon network printing driver problem

What steps are you performing to add the printer? I have found that sometimes I need to click the "Add Devices" button instead of "Add Printer" button for a networked printer to get it to connect and work. Why, I have no idea.

9 more replies
Answer Match 47.04%

Win 7 doesn't support the Canon BJC-4000 ink jet printer. Any other drivers that will work? I love this printer!

Thanks!

A:BCJ - 4000 Canon printer driver needed

Hi,
Double check the # on it cause it's not in the directory. It must be different since it doesn't pull up on my website I am checking.

4 more replies
Answer Match 47.04%

I was working on getting the Canon ImageClass 4150 machine to work on a machine with Vista installed. I downloaded the new driver and upon trying to install the installer informed me that I needed to uninstall the previous instances of "MF Drivers" in order to reinstall.

I ran a utility included in the setup zip file that is supposed to remove previous Canon drivers in the 4100 series. I removed it from Add/Remove programs and also in the Device Manager. I've searched the computer (including hidden files, etc) and can't find any previous instances of the driver. Can't figure out what else I need to install.. Any help please?

A:Reinstalling printer driver for Canon ImageClass4150

http://support-au.canon.com.au/contents/AU/EN/8200334500.html

http://canoncanada.custhelp.com/app/answers/detail/a_id/4073/~/uninstalling-and-reinstalling-the-printer-driver

MF refers to the model group...ignore the fact that the second link refers to Win 7. Both links are provided as just info to consider.

Louis

2 more replies
Answer Match 47.04%

Preciously I had my Canon i9100 installed on a windows XP machine and working well.
I have since updated to a windows 7 (64bit) machine and can't install the old driver from the CD. "The CD Rom cannot be used with the current operating system."
I am aware there is a patch which I have downloaded but it can't patch what is not there.
Please advise me of how to proceed.
note - Internet explorer only comes up with blank screen when a search is performed.
Thankyou

More replies