Tech Problem Aggregator

error message branding configuration

Q: error message branding configuration

hi,

also, each time i start the computer, there is the following message - error failed to load branding configuration -. couldn't find anything on the web. What could it be ?

THANK YOU

A: error message branding configuration

You really shouldn't duplicate post, if not for the integrity of the forum, then so that everyone knows what you are being told and you will not be pulled down two or more pathways to a fix, yano. but no foul, no harm, just acting on your behalf (and SF's)

Mike

1 more replies
Answer Match 61.74%

Recently I've been getting a popup message at boot: Error detected retrieving default

configuration DEFAULT.ALC. I close the window and everything seems to run fine.
Anyone know what that's about or how to fix it??

Machine: Esystems
OS: WindowsXP Home
RAM: 1.5GB
Drive: 120GB
 

More replies
Answer Match 60.9%

The rest fo the error message says- "Failed to read configuration file. Please contact system administrator"
I have just R and R'd Firefox and I'm still getting this error message. It won't run now and now I see just how horrible IE is in XP,since I'm forced to use it now....sob
Please Help!!

A:Firefox won't startup-Error message says "Configuration error"

Only an idea!!!!  Not sure but it may be the newer FF may not run well on XP, you could experiment by down loading and older version.
 
Just checked I may be right check the link below!
 
https://support.mozilla.org/en-US/kb/firefox-no-longer-works-some-versions-windows-xp

7 more replies
Answer Match 60.9%

I istalled a new printer/copier/scanner recently and all seems to have gone smoothly. But now whenever I boot the system, load a cd, launch my dsl connection, etc, I get the message "please wait while Windows configures the printer" and/or ""searching for installed components" or something similar. Can anybody help? Thanks!
 

A:printer configuration error message

7 more replies
Answer Match 60.06%

I get an error message when I open Itunes. It says "Itunes has detected a problem with audio/video configuration..." and that the audio video may not play correctly.

I have uploaded some cd's to Itunes and I have noticed the sound has skips in it.

Also, my daughter wanted to open some pictures from a disc but the disc wouldn't work. I took the disc to work and opened the pictures fine.

I have a Dell Dimension 8200 running XP. I do not have any other problems with the machine.

Are there diagnostic programs that I might try to correct this problem, or do I need to replace the cd drive?

McChuck
 

More replies
Answer Match 60.06%

OS: Windows 7 Home Premium -- Service Pack 1, 64-bit
Browser: IE 9
Computer: Dell Studio 1745

I am receiving an error message window titled "Wireless Configuration" with the following message:

"OLE initialization failed. Make sure that the OLE libraries are the correct version."

I cannot find anything about updating OLE libraries in Windows 7. I have not installed any new software, and my computer is barely 2 years old. I do not find it a coinicidence that my free Dell tech support expired last month, and now I'm having issues with the Dell wireless card.

Thanks for any help you could provide.
 

A:Solved: Wireless Configuration Error Message

8 more replies
Answer Match 60.06%

This a.m. I was greeted by this System Configuration Utility message popup:

You have used the System Configuration Utility to make changes to the way Windows starts.

The System Configuration Utility is currently in Diagnostic or Selective Startup mode, causing this message to be displayed and the Utility to run every time Windows starts.

Choose the Normal Startup mode on the General tab to start Windows normally and undo the changes you made using the system Configuration Utility.
-----------------------------------------------------------

Yesterday I used the system configuration utility to untick a program in the Startup menu. Is that why I am getting this message now?

If I follow the directions and select the Normal Startup option, will all the services that I have painstakingly turned off over time start running on startup again? Or will it just load the one application it changed?

Could I restore the registry from a few days ago instead? And, if I do that, will the tracking cookies I finally got rid of by setting them to be deleted at start-up reappear?

Another question I have is, what is the utility used for, if not to make changes? Is it just to look at? What good is it then?

HP Pavilion - Pentium(R) 4CPU
160GB HDD 512 MB RAM
Windows XP SP2 Home
 

A:System Configuration Utility Error Message

12 more replies
Answer Match 59.64%

hi!

I got on Outlook this message:

One or more rules could not be uploaded to Exchange server and have
been deactiveated. This could be because some of the parameters are not supported
or there is insufficient space to store all of your rules.

any ideas?
thx!!

gicio
 

More replies
Answer Match 58.8%

Windows update was interrupted yesterday and now I'm getting all kinds of errors.

1-SVChost.exe application error Instruction at 0x745f2780 referenced memory a 0x00000000 memory could not be "read". This happens when I try to re update windows and when I boot computer and perodically while searching the internet.

2-No audio device. My sound is only working when the error message pops up.

3-Generic host process for Win32 services has encountered probelm needs to close.
(this occurs when I boot up computer)

4-unable to create C:/document and settings/jamie/application data/BVRP Software Netwaiting Moth log txt.file (this happened when I booted computer

I called dell as the system is only 4 months old, and i have warranty, however they informed me that for software related issues they would charge 264.00!!!

You could say that I'm rethinking my purchase choice.

Any help would be greatly appreciated!

Thanks so much
 

A:SVC host.exe error message-windows update, configuration problem

did a system restore to a checkpoint on monday, when all was well. Fixed the sound problem, but still getting the error message about SVChost and the Win 32 one.
 

2 more replies
Answer Match 48.72%

Hope I'm in the right section. I need a branding tool for my affiliates to brand an ebook and ecourse. I've tried 'viralpdf' but wasn't smart enough to figure it out, and they refunded my money. (?) I mean, I asked them for help several times, then I asked them to refund my money if they couldn't help me, so it's not all their fault.

Do any of you know of another brander? TIA

Tommy
 

More replies
Answer Match 48.72%

I was poking around the forums and couldn't find anything about changing OEM Branding (The pic and OEM information in my computer properties)
I thought some ppl would like to know how to change this or add their own image and info.

Open a text file and past this in it.


Code:
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\OEMInformation]
"Logo"="C:\\Windows\\System32\\oemlogo.bmp"
"Manufactuter"="whatever you want"
"SupportHours"="whatever you want"
"SupportURL"="whatevery you want"
"SupportPhone"="(555)whatevery you want
Change the whatever you wants to the info you want

Name it whatever.reg

save a logo (max 120x120) as oemlogo.bmp and save it in C:\windows\system32

Doubleclick whatever.reg and click yes.

Now you have Branded your PC.

A:OEM Branding

Very useful info for those not willing to use 'tweakers'! Unlike myself.

9 more replies
Answer Match 48.3%

Hi
I've tried changing the windows 7 branding at the login screen with this tutorial: Log On Screen - Change or Remove Text Branding[2]=Appearance Personalize
But when I have saved the dll file and replaced the original with the modified one, the branding in the bottom of the login screen disappears instead of being changed. I replaced the original BMP's with my modified ones of the same size.
Anyway if someone has interest in helping me I have attached the original BMP's and my modified ones.
I have edited the DLL-file with reshacker 3.6.0.92.

Thanks in advance for any help

A:Branding disappeared

I think the files need to be .png not .bmp files

9 more replies
Answer Match 47.88%

hi i have wireless configuration message coming up all the time i followed a link on this site for wisefixer i brought it but it hasnt got rid of the error message i need help its driving me crazy because i cant use my computer
 

A:wireless configuration message

Perhaps you could supply the make and model of your machine and the exact error message you are getting.
 

1 more replies
Answer Match 47.46%

I purchased a sager np2740 laptop online at xoticpc and i recalled there was an option to remove the sager branding. It doesn't cost anything extra. I bought this laptop b/c i needed a fast laptop for online poker thus i7 quad core computer. I also wanted it to be 14.1 and thin and this laptop is that so basically its fast and pretty portable. I'm sure many of you who play games or don't play games probably doesn't want a laptop where its like a big red alien as in those alienware laptops if u use them in a public place. Well i know there are ppl who don't mind it but you probably know what i mean by that.


XOTIC PC | Sager NP2740 (Clevo W740SU) - New 14" Sager Notebook


The gallery picture of this laptop looks pretty nice. I didn't remove the sager branding but thought about it for a bit before i decided not to. The thing is however if i said alienware or msi or those other gaming laptops... i would definitely remove the branding. However, would you say its fine to keep the sager branding? I never knew much about sager, i only had Dell and Asus and when i used my asus 14.1 laptop in public, i always had ppl tell me this laptop is very good looking. It basically looks like a macbook except it isn't and everything about it physically looks great so i wanted to use a sager one similarly although 99 percent of the time, laptop will be inside.


The thing is do most ppl even know what sager is? If i see someone with a sager laptop and as long as it isn'... Read more

A:Removing Branding on Laptop?

Quote:
I don't know but if i see a laptop without any branding on it, such as no dell, asus, hp or another brand, i would assume the laptop is either a very cheap laptop or an expensive customized laptop. Would you agree/disagree with this?


Would you remove the brand names from your car, TV, kitchen appliances, etc.? A number of people won't recognize the Sager brand but some of us who have been around the industry awhile know about it. I bought a new HP Notebook a few years ago and opted for the free upgrades of RAM and HDD. I got the confirmation E-Mail the next day, got the shipment notice the third day and had it 5 days later, came directly from the assembly plant in China so I inherited the bragging rights of what went right.

2 more replies
Answer Match 47.46%

Will IEAK 11 branding package work for earlier versions of IE (9 and 10)?

More replies
Answer Match 47.46%

Media Player v10
Any idea where this junk came from and how to get rid of it ??
It's making me nervous.
 

A:Media Player Branding ??

10 more replies
Answer Match 47.46%

hey guyz i am a gr8 HP fan and i decided to create harry potter version of my w7 . i replaced the bitmaps in basebrd.dll but the result is strange.. where the screen shot can u tell where i m lacking

but infact the image doesnt show itslef bit wraps itself in the windows 7 ultimate logo

A:Help in changing branding logo

Im going to take a shot at the dark.

Something tells me you extracted the images you wanted to edit. You opened up your image editor and then copied and pasted your Harry Potter graphic on top of that.

Thats fine with a non-alpha bitmap. However most win7 bitmaps are ALPHA bitmaps! When you use alpha bitmaps, you gotta also edit the apha layer (google it for more info).

The best thing to do is create a transparent png with your hp graphic. Then use that 32 bit png converter app to convert it to an alpha bitmap.

Trust me, editing alpha layers is not easy. Its soooo much easier to simply create a png then convert it to an alpha bitmap.

Start orbs images are the same way.

Hope this helps.

3 more replies
Answer Match 47.46%

Below is the screen I am using as my Login, except that during boot-up the branding of 'Windows 7 Professional' & 2 buttons show on the screen. I am wondering if there is a way to remove the Windows 7 Professional branding & the 2 buttons on either side.

A:7 branding label removal

  
Quote: Originally Posted by CJW


Below is the screen I am using as my Login, except that during boot-up the branding of 'Windows 7 Professional' & 2 buttons show on the screen. I am wondering if there is a way to remove the Windows 7 Professional branding & the 2 buttons on either side.


Try this for the branding.
Log On Screen - Change or Remove Text Branding
Jerry

4 more replies
Answer Match 47.46%

Hi Guys

i just made some changes to msconfig and made so that a few programs dont start automatically on startup, to speed up my computer a bit, but now when i start my computer it comes up with a message saying:

"you have used the system configuration utility to make changes to the way Windows starts.

the system configuration utility is currently in diagnostic or selective startup mode, causing this message to be displayed and the utility to run every time windows starts.

Choose the normal Startup mode on the general tab to start windows normally and undo the changes you made using the system configuration utility.

[]don't show this message or launch the system configuration utility when windows start:"

What do i do? because i don't want to revert back to my old settings, because it'll slow my computer down again, but then i don't know if i want my computer to be running in a funny mode. does anyone know what this means or what i should do?

Thanks heaps!

A:system configuration tool message, help!

Just check the box is all.

Any time you change something in MSCONFIG, you will get this message again.

BG

4 more replies
Answer Match 47.46%

whenever i start up my PC, i get System Configuration Utility Message, despite checking the box saying i don't want the message displayed everytime

also i get a registry change denied message from spybot

i'm worried that i have malware of some sort

what do i do?

thanks in advance
 

A:System Configuration Utility Message

bump
 

1 more replies
Answer Match 47.46%

I downloaded an upgrade of the Adobe Acrobat, but everytime I go into it a message comes up "You cannot currently view Adobe PDF files from within your web browser due to a configuration problem. Would you like Acrobat to fix the configuration?" I click yes and then I can view them. What is that all about? Everytime the message comes up and I would think if it was fixed the first time, it wouldn't have to be fixed again.
 

A:Adobe Acrobat Configuration Message

Hi Liz:

Take a look at <a href="http://libnt1.is.tcu.edu/www/ereserve/acrobat_problems.htm"> this </a> link. Particularly the second problem/solution listed.

Hope that helps!
 

1 more replies
Answer Match 47.46%

I've reset my Asus laptop and now every time I turn it on it comes up with:
"A configuration change was requested to clear this computer's TPM (Trusted Platform Module)
WARNING: Clearing erases information stored on the TPM. You will lose all created keys and access to data encrypted by these keys.
Press F12 or Volume Up to clear the TPM Press ESC or Volume Down to reject the change request and continue"

I don't know much about this so I'm too scared to press F12, if I do will it cause problems? Any help would be appreciated, many thanks.

More replies
Answer Match 47.04%

Hello all. I purchased some weather software called StormLab 2.0 from Interwarn (http://www.interwarn.com), and it comes with an upload plugin that uploads the latest local radar image to my website.

The thing I do not like about the software is they brand the lower left corner of the radar with their logo and website.

I know this doesn't sound like much of a big deal, but I paid over $200 for this software and I do not want that bug on my radar image.

They DO NOT own the image, because they use the data and maps directly from the National Weather Service. The NWS doesn't bug their maps, so I can't see a possible reason why this software can get away with it.

Has anyone had any experience with this program that could maybe help me out?

Thanks

-Mark

P.S. I'm not trying to say the software is bad...the functions are excellent and unbelieveable, but this one thing just kills me.
 

A:Software I purchased branding my images!

6 more replies
Answer Match 47.04%

I replaced the system board and was going to brand it but my documentation only covers up to G2.  When trying to use it for a G3 model it was unsuccessful.    I  need to create a WinPE32 (WNDMIFIT/DMI) USB key and  create a DOS (NBDMIFIT/UEFI) USB key.   UEFI bios has changed from G2 version and I need how to setup the UEFI for the G3.Thanks

More replies
Answer Match 47.04%

Hey,

I've made some changes to my startup configuration in MSCONFIG.
(BTW, I'm running Windows Vista 32-bit on this computer, not my original rig)
But now, every time I start my computer, I get this message.

I always check the box for "never show this message again", but it doesn't work.

Plz help, thanks!

A:Constant System Configuration Message at Startup

Have you attempted resetting the configuration as suggested in the error message? What setting did you change in your msconfig?

9 more replies
Answer Match 47.04%

When I start up my computer, I get a message at the log in screen that reads:
 The Configuration data for this product is corrupt. Contact your support personnel. Then it won't allow me to do anything from there.
I don't know much about computers but I have tried to manually repair the boot configuration data but that didn't work. Could anyone please help me with this!! Thanks
 

A:Configuration Data Corrupt Message on Welcome Screen

Can you boot into Safe Mode?
 
What is the make and model of this computer?

2 more replies
Answer Match 47.04%

Hi!
I am trying to aggregate a new Test Log Configuration for my logs, but Message Analizer cannot see my .config file into the directory: C:\...\Microsoft Message Analyzer\OPNAndConfiguration\TextLogConfiguration\
what can I do? Thanks for all,
Regards.

David Alh

More replies
Answer Match 46.62%

I have an MS access 2007 application that I have created for a few small users. Basically I have 8-9 tables, 8 forms, couple of queries, etc.

I want to brand the software by having a couple of fields from a table populate on the header of each form. All of the other fields on the forms populate fine, but the ones from the separate, unrelated table do not populate and gives me the #Name? error.

Other posts here have indicated that the fields are not correctly associated with the form. This is correct but when I try and associate the fields, it asks me for the relationship of the tables in the form and there is none.

Is there an easy way to fix this, or do I have the wrong approach all together.

Thanks in advance.

Carl
 

A:Solved: branding of access 2007 application

6 more replies
Answer Match 46.62%

Since April this year when booting up my computer I always get a BSOD with oxoooooooooo7e and eventually when I get to the windows repair screen it tells me a change in the computers configuration may have caused this problem but my custom built computers system restore doesn't go back to April.

A:BSOD startup problems and message change to configuration

Hi rogerthedodger ,
I'll ask for this post to be moved to the appropriate section, in the mean time follow BSOD posting instructions
linked below. (Don't open a new thread just post it here).
Blue Screen of Death (BSOD) Posting Instructions

9 more replies
Answer Match 45.36%

I have a 1 month old Dell XPS 8900 and my Avira virus scan flagged Dell Foundation Services as a virus.  It came pre-installed with Windows 10 and Dell Foundation Services.
Specifically:
C:\Program Files\Dell\Dell Foundation Services\DCF.Branding.dll
[DETECTION] Contains suspicious code HEUR/APC (Cloud) [WARNING] The file could not be copied to quarantine! [WARNING] Error in ARK library [NOTE] The file is scheduled for deleting after reboot. [NOTE] It is recommended to restart your computer in order to finish the repair.
Has anyone else experienced this?  Shall I just let Avira delete this dll?  Will that break the application?  Should I uninstall Dell Foundation Services?  What does Dell Foundation Services do?  Is it needed?  Thanks

A:DCF.Branding.dll flagged as a virus (Dell Foundation Services) on new XPS 8900

It is probably safe. The HEUR/APC code you see is telling you that it found a process that triggered their heuristics engine. The heuristics engine scans running processes, and flags things that attempt to modify files on your computer.
See: http://www.shouldiremoveit.com/Dell-Foundation-Services-141858-program.aspx
You may want to also discuss this on Avira's forum:. https://answers.avira.com/en/

2 more replies
Answer Match 42.42%

Try this link: http://support.microsoft.com/kb/836941
 

More replies
Answer Match 42%

Hi

When I open a Command Prompt as non-elevated , I receive the following error:-

The system cannot find message text for message number 0x2350 in the message file for Application.

The system cannot find message text for message number 0x2334 in the message file for Application.

If I open a Command Prompt as administrator I receive:-

The system cannot find message text for message number 0x2350 in the message file for Application.

The system cannot find message text for message number 0x2334 in the message file for Application.
The system cannot find message text for message number 0x8 in the message file for System.

This relates to Windows Vista x86 and I am totally stuck!!
 

A:Vista Command Prompt error - Cannot find message text for message number 0x2350

How are you opening cmd prompt
 

3 more replies
Answer Match 41.58%

I cannot reply to my emails..I get an error message and it tells me my forward is off in outlook

More replies
Answer Match 41.58%

Hi, this is my daughters computer  which I have brought to you before, she keeps downloading stuff (minecraft mods etc).  I suspect malware as we are getting  weird boxes appearing on start up, would you please check the logs - thank you
 
 
DDS (Ver_2012-11-20.01) - NTFS_x86 
Internet Explorer: 8.0.6001.18702  BrowserJavaVersion: 10.13.2
Run by hp at 10:21:07 on 2013-04-04
Microsoft Windows XP Professional  5.1.2600.3.1252.44.1033.18.3455.2776 [GMT 1:00]
.
AV: Avira Desktop *Enabled/Updated* {AD166499-45F9-482A-A743-FDD3350758C7}
.
============== Running Processes ================
.
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\SCardSvr.exe
C:\Program Files\Avira\AntiVir Desktop\sched.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QlbCtrl.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\Analog Devices\Core\smax4pnp.exe
C:\Program Files\Hewlett-Packard\HP ProtectTools Security Manager\PTHOSTTR.EXE
C:\Program Files\Avira\AntiVir Desktop\avgnt.exe
C:\Program Files\Common Files\Java\Java Update\jusched.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\WIDCOMM\Bluetooth Software\BTTray.exe
C:\PROGRA~1\WIDCOMM\BLUETO~1\BTSTAC~1.EXE
C:\WINDOWS\system32\agrsmsvc.exe
C:\Program Files\Avira\AntiVir Desktop\avguard.exe
C:\Program Files\WIDCOMM\Bluetooth Software\bin\btwdins.exe
C:\WINDOWS\system32\IFXSPMGT.exe
C:\WINDO... Read more

A:Security error message active desktop recovery message

Hymy name is Daniel and I will be assisting you with your Malware related problems.Before we move on, please read the following points carefully.First, read my instructions completely. If there is anything that you do not understand kindly ask before proceeding.Perform everything in the correct order. Sometimes one step requires the previous one.If you have any problems while you are follow my instructions, Stop there and tell me the exact nature of your problem.Do not run any other scans without instruction or Add/ Remove Software unless I tell you to do so. This would change the output of our tools and could be confusing for me.Post all Logfiles as a reply rather than as an attachment unless I specifically ask you. If you can not post all logfiles in one reply, feel free to use more posts.If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed.Stay with me. I will give you some advice about prevention after the cleanup process. Absence of symptoms does not always mean the computer is clean.My first language is not english. So please do not use slang or idioms. It could be hard for me to read. Thanks for your understanding.I am currently visiting an evening school and working nightshift only which might be evening for you. In this time I am mostly online with my mobile devices and won't be able to reply.    Click > Start > Control Panel > Add / Remove Programs and uninstall the following pr... Read more

19 more replies
Answer Match 41.58%

using windows xp on my presario sr1103wm i ran the recovery in the pc repair program and after it restarted all i get is this error message has detected a configuration error (code purple) and the computer is non-responsive help
 

More replies
Answer Match 41.58%

I have an HP pavilion A6303w,every I tried to booted it.It always come with a message stated configuration error code purple...It's a windows vista desktop..I even try to change the windows vista to windows xp..As soon as I insert the cd in the drive,it started downloading just fine.As soon as it started to set up the windows it stop..And come back with that message configuration error..Please help thanks.
 

A:Configuration error.

I have never seen something give an error message "code purple". Maybe it is a BIOS error message? Do you see that "code purple" as you boot the machine or would Windows start running and give you that error ?
 

2 more replies
Answer Match 41.58%

When I try to run SPSS which I recently installed it receive an error message stating that the application can't run because of a configuration error. Can any one help with this? My professor was telling me what that meant and honestly really freaked me out.

A:Configuration Error

It simply means that it didn't install properly/completely...for whatever reason. It's not set up properly for use.Program settings are configured (usually) after install...or using the default settings.Google LinksLouis

1 more replies
Answer Match 41.58%

Hi

I just re-installed windows XP pro on my dell pc,and when i come to switch on the machine ,i get a message before startup saying invalid configuration information.
I have to wait and then it starts up. It has also reset the time and date.

The battery inside was fine before i wiped it-could it be the BIOS ?

Any help would be very welcome
Thank You
 

More replies
Answer Match 41.58%

when i try to start a game it says it cannot
open the configuration
 

More replies
Answer Match 41.58%

Hello,

This is the first time here for me, have searched the forum and could not find an answer to solve my problem, maybe I have overlooked it.

Here is the problem, when I turn my computer on I get this error message.

CPU = Intel (R) Pentium (R) 4 CPU 2.00GHz
639K System Ram Passed
638M Extended RAM Passed
512k Cache SRAM Passed
System BIOS shadowed
Video BIOS shadowed
ATAPI CD-ROM: Sony DVD RW DRU-720A
ATAPI CD-ROM: HL-DT-STDVD-ROM GDR8160B
Mouse initialized
ERROR
0162: Configuration Error - Default configuration used

Press F1 for Setup
If someone could give me some guidance it would be greatly appreciated, the operating system is Windows XP Pro.

Thank you
wicewater
 

A:Configuration Error

7 more replies
Answer Match 41.58%

i just typed a whole essay basically and because i forgot to get back on the other net its all gone!!

HAVE EXAMS so can't type all that again!!

-Using vista, Arris touchstone telephony modem (only DS and power lights flashing, don't think this is normal. Every few minutes all flash), MSI 108M wireless router (all lights flashing normally, i think, only numbers not, don't know if they usually do)
-Net connection just went off spontneously (at about 2pm GMT -4)
-I went to network connections and tried changing DNS (suggestion from previous post) as i initially got message "cannot communicate with primary dns server", didn't work
-Also got message "network adaptor needs to be reset" after the 1 above and "The TCP is wrong" before the title, but it has gone back to the title
-Service provider tech dept not answering

If you need more details please ask!!
 

A:network diagnostic message: "there may be a problem with your DNS configuration"

9 more replies
Answer Match 41.16%

Hi folks, I hope someone can help me with this problem:

I'm getting the 'Windows not genuine' message box show regularly. When I follow the link to investigate I get the Windows Activation Technologies box come up saying that the Update Installation Failed with Error Code 0x8000247.

A while ago I replaced a failing hard drive with a new one, cloned the hard drive and used that image to replace everything. After a while I started to get the not genuine message.

Here is the diagnostic report, and I would welcome any help:


Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-TBM4X-GXTGC-GT8X9
Windows Product Key Hash: JCkgn/yX0uIXVvNpetump5h4B8c=
Windows Product ID: 00359-029-7031935-85483
Windows Product ID Type: 5
Windows License Type: Retail
Windows OS version: 6.1.7600.2.00010300.0.0.003
ID: {3FFF282A-2C20-4B16-8478-BAD3A2C333FF}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: Registered, 1.7.69.2
Signed By: Microsoft
Product Name: Windows 7 Home Premium
Architecture: 0x00000000
Build lab: 7600.win7_gdr.110622-1503
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x... Read more

A:Windows not genuine message plus Error message 0x8000247

This may simply be caused by a bad set of Intel Rapid Storage Technology drivers -

Installing the Intel Rapid Storage Drivers
try downloading and installing them from here - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21730

(you want the iata_enu.exe download)

Once complete, please reboot twice, then post another MGADiag report.

9 more replies
Answer Match 41.16%

When I try to post a message on a board that I joined, I get the following error:

"The host you are trying to send the input from is not a valid host."

What does this mean? And how can I fix it?
 

A:error message when attempting to post on a message board...

http://boards.collectors-society.com/showflat.php?Cat=0&Number=754218&Main=5802
 

1 more replies
Answer Match 41.16%

I'm running Windows XP SP 2 and I get an error message whenever i connect my blackberry curve to the computer. if the usb device is stopped, it will go away, but other than that it won't disappear after clicking cancel. if it helps, I installed the roxio media manager only yesterday, when the error first came up.

Its name is Exception Process Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6b

thanks for the help.
 

A:Error message: Exception Process Message c0000013

I think before you ask here you can try search in google.
See here for your error:
http://www.consumingexperience.com/2007/11/windows-no-disk-exception-processing.html
 

2 more replies
Answer Match 41.16%

My Dell desktop Dimension E510 computer with one gig RAM and XP professional failed to start and I was eventually forced to do a repair of Windows which after several hours allowed me to restart it and it is apparently back to where it was with no need to reinstall any drivers, programs, settings, etc. During the Repair there were two places were I had to skip things that would not load. However, it now has two error messages that keep popping up and I cannot get rid of them.

The first is in a window labeled "msfeedssync.exe - Application Error". The message is "The instruction at 0x77d4bbcd referenced memory at 0x00000048 cannot be read". It pops up and says click OK to terminate program or click cancel to debug the program. Clicking either twice closes the pop-up but it returns about two minutes later. How can I get rid of thsi message.

The second problem is a window labeled "Status" which starts a ticker tape to load info and then a second window pops up that says "The feature you are trying to use is on a CD or other removeable device. Insert disk and click OK. The status file is an "Installation Package.msi file. No m,atter how much I click cancel or OK the windows will not close. I can put them in the background, but is annoying.

Any advice would be helpful. I thought of doing a complete reinstall of Windows but I believe it wipes out all my programs and I don't want that if possible. Thanks in advance for any help. This... Read more

More replies
Answer Match 41.16%

I have Windows Me and when i try to boot up i get this error.


Cannot find System.ini.

Boot with emergency boot disc and type scanreg/restore

WHAT Do i do?? I dont have the boot disc. I have another computer with xp and if i need to download a file i can. Any help?
Edit/Delete Message
 

A:Registry Configuration error

Yes this was copied from another thread. I posted it in the wrong place
 

2 more replies
Answer Match 41.16%

Hi there guys.

One of my applications, Microsoft Flight Simulator X was working normally for awhile until I encountered a problem where it says the application could not start because its side by side configuration is incorrect. I cleaned everything up by doing "sfc /scannow" in Command Prompt and it solved the problem.

However, when I tried to open up Microsoft Flight Simulator for the second time, the error occurred again. Can I please help some advice on how to stop this re-occurring problem?

Thanks,
Jozef

A:Sidebyside Configuration Error- NEED HELP!

Welcome
It will take a little while, but I will refer this to our forum specialist in this area.

9 more replies
Answer Match 41.16%

System details;
OS Windows 7HP 64bit
CPU AMD Phenom II Quad
Motherboard ASUS M4A79-T Deluxe 790FX
Memory 12BG Corsair XMS3
Video card Sapphire ATI Radeon HD 4890
Boot disk C:\ Samsung Spinpoint 1TB 7200 SATA II 32MB
Problem;
Tried to update Snagit 11 (build 207) to version 12.2.2 (build 2107) but when trying to install the update I get snagitup.exe-Configureation paser error, error parsing C:Windows|Microsoft.Net\Framework\v4.0.30319\config\machine.config Paser returned error 0xC00CE508
 
Would greatly appreciate any help 

A:Configuration Parser Error

Worth a look, Configuration Parser Error .
 
Louis

5 more replies
Answer Match 41.16%

Hello there. I hope I have posted this message in the right area. This morning I fired up my pc to find an error greeting me. It was that windows was missing a configuration file. I rebooted a couple of times then it came back up.

Once it did tho, it went through reloading all my hardware. Everything was fine so I thought. I then realized there was no sound. Xp is showing the Realtek onboard sound card there, indicating under Audio Devices, Properties that "This device is working properly" and "Driver is enabled but has not been started". However, under the main Volume tab it shows "No Audio Device".

I have verified under Services that Windows Audio is started and running (set to 'Automatic'). I have attempted to remove and resintall the device, tried alternate drivers, all to no avail. Any suggestions or recommendations on how to proceed would be so greatly appreciated!
 

A:Configuration error...now no sound.

7 more replies
Answer Match 41.16%

I'm on ADSL Zoom X3 modem connected to my PC with No other Router connected

when I used a bittorrent for the 1st time (Azureus), I got NAT error problems, this happened to everything I tried.
It tells me I have no remote access & icons stay on yellow?
I checked all the wizard configurations & whatnot, they all told me I have a NAT error

I just want to know if theres anything I can do? because when I switched to my AOL 56k connection, the NAT error was not present there
SO is my NAT messed up or not set up correctly???

I don't have a router so I can't open any ports only on it,
I'm only with my DSL modem, so I went to my DSL setup page

I went to the NAT CONFIGURATION OPTIONS
the screen had this info:

NAT : Enable
Mode: Dynamic

Session: blank (no other options listed but can be typed on)
User IP: blank (no other options listed but can be typed on)
Action: add (& another option for delete)

Number | Session | Name | User IP
# of NAT configurations: 0
I tried switching to disable NAT!
the description makes it seem like hackers can get to my IP & whatnot without it, but I tried anyways, BUT I could not connect to the net anymore after that, I had to re-enable it.

All I know on on Azureus is that in options it states 6881 as the incoming TCP listing port.
there is no Session or User IP info there to find & typing 6881 on User IP just tells me it's an inncorrect IP
can anyone help?
anyone with any knowledge of this??
is it poss... Read more

A:can ANYONE help me with a NAT error/configuration problem??

the other options on my dsl setup page other then NAT are:

WAN settings
LAN settings
NAT
Virtual Server
DMZ
DNS
ADSL Configuration
Route Table
Misc Configurations
Bridge Filtering
RlP Configuration

are any of those helpful to open the 6881 port?
 

1 more replies
Answer Match 41.16%

i had the sbc yahoo utilities on my comp with the browser and chat and little things like that and then i uninstalled it and tried to reinstall it and now i get an error half way through saying can not configure to my comp??? howcan i fix this???
Thanks
 

More replies
Answer Match 41.16%

I have tried everything but everytime I boot up my computer I get this hardware configuration error any suggestions on what I should or can do?
 

A:Hardware configuration error

What operating system do you use, and what is the brand and model, or configuration of your computer. What tasks are you running when you get the hardware configuration error... or does it even boot.
Tell us as much as you can, so we can imagine what you are up against.
 

3 more replies
Answer Match 41.16%

I have Windows Me and when i try to boot up i get this error.


Cannot find System.ini.

Boot with emergency boot disc and type scanreg/restore

WHAT Do i do?? I dont have the boot disc. I have another computer with xp and if i need to download a file i can. Any help?
 

A:Registry Configuration error

Take your system to someone who can test your hard drive and reload Windows Me for you
 

2 more replies
Answer Match 41.16%

I'm using Win 7 ultimate 32 bit. I've a problem when configure DNS. I enter Local Area Connection Properties then click on Internet Protocol Version 4 but it show a window and disappear.

It like this video:

Who can help me, please?

A:Error! can not set up TCP/IP configuration on Win 7 ultimate

Can you access it in safe mode?

9 more replies
Answer Match 41.16%

ok heres the prob...
today my nephew was playing sims 2 and while he was playing he hit the shelf the tower was on..it fell less than 2 feet and not very hard since the cords slowed its fall...
now when i go to restart it i get this errors:

0162 configuration error
no dhcp or proxydhcp offers were recieved
1962 : no operating system found

im not sure what has happened or what I need to do now.
I was reading online and it said run setup but not sure what that meant.
 

A:0162 configuration error

Run setup probably means run Windows setup. But i think i may know what is wrong. Can you check the hard disk IDE cable, make sure both connections at either end of the cable are securely fixed into their sockets
 

2 more replies
Answer Match 41.16%

I'm having this issue

TCServer.ext - Configuration Error

Unable to load Jit Compiler (MSCORJIT.DLL)
File may be missing or corrupt
Please check your setup or rerun setup!

Basically when I did a google search I came up with this patch for what everyone says is a memory leak.

http://www.microsoft.com/downloads/d...displaylang=en

This didn't solve my issue.
The actual issue is that this error comes up as soon as I log into windows and either freezes me straight away or resterts.


- Version of the OS. XP Tablet Edition
- Security Patches - Unknown. I can't use the tablet long enough to check
- If the OS produces an error, either upload a screenshot of the error message (ALT+PrtScrn), or literally quote See above
- Were there recent crashes that could have caused this problem?Unknown
- Did you install new software recently? If this is the case: Which software? (Brand, version, build)Unknown
- Did you do any of the following:
- Run a scan with an updated anti-virus program?No, can't
- Run a scan with an updated anti-Trojan program?No, can't
- Run a scan with an updated root kit detection program? (This only for Windows NT, W2K and newer!)No, can't
- Run anti-spyware scans with at least two freshly updated anti-spyware programs? No, can't
If any of these program found something, provide us with the information on what it/they found. N/A

More replies
Answer Match 41.16%

I got this error after I did a Compaq System Recovery.
Your system has detected a configuration error. Please report this error to Customer Care using the phone number found in the Warranty and Support Guide that came with your PC. Unless corrected, this error will prevent your PC from operating properly. Turn off your PC by pressing and holding the Power button. After a few seconds your PC will automatically turn off. (Code Purple)
Help!
 

More replies
Answer Match 41.16%

Hi, I am actually trying to configure a router, with a serial and fast ethernet interface..
now i have a network address of 192.168.50.1 and i have used 192.168.50.2 for the fast ethernet interface and 192.168.50.3 for the serial interface, but it giving me an error, saying its overlapping the fast ethernet address of 192.168.50.0, is there anything i'm doing wrong there? can anyone help me please...
 

A:Hi everyone i have router configuration error...

6 more replies
Answer Match 41.16%

Friend has and HP a535w that is producing an error, machine boots up until the XP media center splash screen and then an error box appears:System Configuration ErrorThe system has detected a configuration error. Please report this error to customer care using the phone number found in the Warranty and support guide that came with your PC. Unless corrected this error will prevent your PC form operating properly.Turn off your PC by pressing and holding the power button. After a few seconds your PC will automatically turn off. (Code Purple).'i searched google and the only thing i could find http://www.resellerratings.com/forum/tech-...ode-purple.htmlwas that this had something to do with "tattooing" the recover to the motherboard, and a workaround was to attach the HDD to a usable system andopen up C:\hp\bin\ConfigCheck\cfgchk.bat with notepad and modify the section that checks to see if the hard drive is tattoo'd to have it not bother checking at all. (although the hard drive will be running as slave so replace the C:\ with whatever drive letter Windows assigns it) The line to remove is: "python c:\hp\bin\ConfigCheck\run.py". This worked great for me and I hope it helps anyone else who comes along this thread as an alternative to dealing with tattoo'ing the motherboard or hard drive. i did this and cannot find the .bat file, that path does not exist.this machine is out of warranty and we do not want... Read more

A:HP system configuration error

http://www.techimo.com/forum/applications-...ode-purple.htmla couple of pages into this thread seem to have several fixes.

4 more replies
Answer Match 41.16%

Hey there,

I'm on windows XP

when it comes to installing many new applications (not pirated or anything) I get this error

"C:\filelocation\program.exe

This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem."

It has happened both for the new MSN (Im stuck using windows messenger) and Ableton Live 8.03

I've obviously tried reinstalling a whole bunch of times, but no luck. Is my only option here reformat, could it be something viral? Or something more simple (i hope!)

Cheers and thanks a lot
 

A:Application Configuration error (XP)

8 more replies
Answer Match 41.16%

Immediately after upgrading to IE8, a Wireless Configuration error message began appearing and will not close even when I reboot my Acer Aspire 5600. It reads as follows:

Incorrect MFC Dll version installed on system, minimum requirement is MFC SP4 dll.

I located an answer from Dell for their computers in these Forums, but can't find anything here for Acer. Any help would be appreciated.

Laurie

A:Wireless Configuration Error

do you have a service running called Broadcom Wireless LAN Tray Service
control panel> admin tools> servive

3 more replies
Answer Match 40.74%

My Internet Explorer screen is branded with the name of the company which supplied my computer - so it reads:

Microsoft Internet Explorer provided by Watford Electronics.

Would appreciate learning how to remove this branding.
 

A:Solved: Internet Explorer "Branding"

It's a fairly easy registry edit http://support.microsoft.com/kb/176497.

If you're not comfortable editing the registry, get Spybot - Search & Destroy and go to Tools > IE Tweaks.
 

3 more replies
Answer Match 40.74%

I am running windows XP on a laptop but it stops loading when it gets to the microsoft logo (HDD stops working rather than computer hanging - scrolling bar still scrolling but HDD light stops)

I have started up in safe mode and it says that there is a problem with the configuration of the network hardware. I have tried restoring the computer to a previous setting but this stops working when it restarts at the same period it stopped working before

Please can you provide indepth info as my computer is running in Spanish (long story) and i dont speak a whole lot of spanish!
 

A:Network Hardware configuration error

Delete the network hardware from device manager while in safe mode and reboot.
 

2 more replies
Answer Match 40.74%

I recently tried to turn on my pc and the boot manager screen is up and no matter what i do for several days now i cant get past this screen someone please help ive tried everything

A:Boot Configuration Error 0xc000000d

See Troubleshooting Windows 7 Failure to Boot

3 more replies
Answer Match 40.74%

I was trying to repair a software installation (Iomegatools) by removing and reinstalling this software. My system froze after the installation and I shut down the computer and tried to restart Windows XP. On restart, I get a black screen with white type indicating I have an invalid system configuration. It suggests I run Setup to input the correct date and time. When I get past that it starts to load windows XP but freezes on a blue screen with the Windows XP logo but no User logon information. Any suggestions?

Thanks,

Jon B

A:Invalid System Configuration Error

Have you tried to start the machine in safe mode and use XP system restore yet?

7 more replies
Answer Match 40.74%

Hi
Having problems with connecting to my xbox 360

main problem is when media center is configuring extender and computor it ticks the first two boxes but on the configuring extender settings it take a long while before it comes up with

CONFIGURATION ERROR

An error was encountered while configuring your computter for use with this Extender.

Have tried the deleting of Certifiacate in mmc - still does not work
any clues please

Jeff

A:xbox 360 extender configuration error

I too am having the same problem but i don't even get the first tick.
Its not my Anti virus Firewall issue.
It is a modem/router port firewall issue.
What modem are you running?

3 more replies
Answer Match 40.74%

I have a laptop that on my wireless school network would connect fine and automatically. The network is a guest network so it is unsecured. I recently had to reinstall the operating system on my laptop to fix several access rights errors and others (reinstalled Vista). After the reinstall I am having a lot of trouble accessing the internet on the school network. The network and sharing chart will occasionally show that I'm connected to the public network and it will also go all the way through to internet access but my pages wont load and I don't have connection (I use google chrome as my browser but thats not the issue).

I've tried:

-Pinging common websites, it comes back and tells me that I have entered the name wrong which is odd.
-Restarting my computer
-Restarting my laptops wireless adapter
-Checked wireless connections at my house and at other network in my computer engineering class, all of which give me full access to the internet.
-Check DNS information I get a DNS error from doing a diagnosis(this I may not have done right so more information would be great). The diagnosis says I can't connect to www.microsoft.com common dns server
-When it says I have internet and I go to a page I get a error about not being able to resolve the server
-Disabling DNS prefetching
-My own IP is pingable which is normal.
Hopefully I can get this fixed soon because several of my classes are online classes at school which will end up forcing me to do a bunch of ... Read more

A:Solved: A sort of DNS Configuration Error?

11 more replies
Answer Match 40.74%

Hey. Not sure where to post this problem so I just decided to put it in with games. I use a program called DAEMON to use virtual disk drives. Wierd thing is that the first two drives do not have a letter assoicated with them (E:, F and it won't save any changes I make on the main configuration options screen that sets a letter. They've worked before, but I just noticed now that they were gone. Any solution to this baffling mystery?
 

A:DAEMON Wierd Configuration Error

Have you tried setting the number of drives to zero and then back to two?
 

2 more replies
Answer Match 40.74%

I would like to say hello to everybody here. I have a problem. My problem is the nasty dredful Code Purple Configuration Error for HP. I have been working on a HP Pavilian mini tower, and I ended up having to destructive restore it. I then restart the tower, and I get this Config Error code Purple. I don't mess with HP very much (I compac/HP) I have also did my research on the problem, and I know its got a tatoo on the mother board(haven't added any hardware, and the reason for the restore everytime I tried to logon, it would say saving settings and restart) Of course this computer hasn't came with a restore disk, its on a partition of its own. I know their was a lawsuit over HP sending restore disk, and I also know I need to put the hardrive in a different tower and delete a bin file. Here's the problem. I have been fighting with hp over this restore disk and wanting me to pay for tech support. I feel I shouldn't pay for tech support because this problem was caused by them. My question is there away to fix this easier than the other ways shown on this forum. I never have hook up a hp hard drive to a different tower(which I don't think will post any problems, but then when deleting bin files or even locating these file. I am not too comfortable with doing. Will someone either let me know a easy way to fix this or instruct me in which is the best way and the step to fix it. Sorry for acting like a dumby, but i am not trying to mess up this HP comp... Read more

A:Code Purple Configuration Error HP

I'm guessing nobody wants to touch this with a 10ft. pole. I still have the same problem with this HP, and I really don't know what will work to fix this, and if there is a way to do it easier. I have read alot about this subject, but really can't find the correct way to get this up and running. If someone could help that would be great.
 

1 more replies
Answer Match 40.74%

I recently booted up my Gateway notebook only to find the "blue screen of death"

I rebooted and it came up to a windows boot manager screen which says windows failed to start..insert installation disc and click repair to fix...blah blah...i'm sure you know the story...

My question is, I booted the Vista disc and when I click repair it doesn't even find the C: drive...when I try and run the BCD fix from the command prompt screen, it says it found 0 Windows installations...would this indicate a faulty hard drive?? If so, I dont mind replacing the drive, I just wanna make sure this is the issue before I spend the money to replace it...

Much thanks for any help anyone can offer!

A:Boot Configuration Data Error

I'm not sure what BCD fix you tried, but see if it is this one and if not, try this one.

To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps: (you need a Vista Installation Disk to do this)

1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
2. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
4. Click Repair your computer.
5. Click the operating system that you want to repair, and then click Next.
6. In the System Recovery Options dialog box, click Command Prompt.
7. Type Bootrec.exe, and then press ENTER.

Note If rebuilding the BCD does not resolve the startup issue, you can export and delete the BCD, and then run this option again. By doing this, you make sure that the BCD is completely rebuilt. To do this, type the following commands at the Windows RE command prompt:
 bcdedit /export C:\BCD_Backup
 c:
 cd boot
 attrib bcd -s -h -r
 ren c:\boot\bcd bcd.old
bootrec /RebuildBcd

See if that works.

If you don't have the disk (or that didn't work), try EasyBCD http://neosmart.net/dl.php?id=1 and see if that helps resolve the problem.

If that doesn't work, you probably have some type of hardware problem - but it's hard to tell. It may be as simple as the hard drive cable got disconnected a... Read more

3 more replies
Answer Match 40.74%

Hi i bought a COMPAQ pc, windows XP desktop in 2003 at a local Best Buy. I was creating a second user account for the system when it froze and shut down. Upon restart, the loading Windows XP black load screen that shows up right after power returns froze and a window came up saying system configuration error. I am currently 20 miles from my house ,and on a different computer obviously, but the i can remember that the error tells me that if problem is not fixed please call the number in my computer manual. I would LOVE to avoid waiting on the phone please help !~~!! please..My only solution i could think of was using the system restore disk but i do not even know if the boot up goes far enough for the PC to read the disk. Please help and thank you for your time.
 

A:System Configuration Error and no Boot up :(

Hi and welcome. See if you can start in safe mode. For a system this old, I doubt you'll get anywhere calling the number in the computer manual anyway.
 

1 more replies
Answer Match 40.74%

Received error message:
Windows Boot Manager
An error ocurred while attempting to read the boot configuration date.

The instructions are to insert the Windows disk and restart the PC, however I can't get past this screen. When I restart I end up on the same screen.

How can I get past this error screen?

Thanks.

A:Boot Configuration Error Screen

Try following these steps. an error occurred while attempting to read the boot configuration data (Vista)

5 more replies
Answer Match 40.74%

couple of times faced with the Illustrator crash and failure to start. Configuration error "Error 3". While trying to fix, found that somewhere lost file "c:\Program Files\Common Files\Adobe\Adobe PCD\pcd.db" (I am talking about Win XP). Tried to clean a temp folder, but this did not help. Scanned for viruses, all clean, as said antivirus. Reinstalling did not help in the matter too. I know i lose sight of something important and i need an advice.
 

A:how to fix Adobe Illustrator configuration error?

howdy and welcome.

I do NOT use Adobe Illustrator, but there are tons of people here who do. One thing I dug up in my digging was https://forums.adobe.com/thread/988381; have you taken a look there yet?
 

1 more replies
Answer Match 40.74%

Hi Guys,
I have recently installed windows developer preview, since installation I'm facing a problem while Outlook configuration.

after done all things when i test account setting it shows "log onto incoming mail server ERRR X fail"
Please guys help me regarding this

More replies
Answer Match 40.74%

Get this message when I go to START,RUN ,WINIPCFG. PLEASE ADVISE SOLUTION TO AVOID THIS MESSAGE.TRYING TO RUN HOME NETWORK BETWEEN TWO COMPUTER 3FT APART.
 

A:fatal error; can not read IP configuration

You need to adnvise which version of Windows you are running, but have a look here anyway:
http://support.microsoft.com/default.aspx?scid=KB;en-us;286748&
 

1 more replies
Answer Match 40.74%

Hi everyone. I am getting a Configuration Error on some sites. What does this mean?

Here's the text of the error:

Server Error in '/' Application.
--------------------------------------------------------------------------------

Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.

Parser Error Message: Failed to decrypt using provider 'RsaProtectedConfigurationProvider'. Error message from the provider: The RSA key container could not be opened.

Source Error:
Line 12: </configSections>
Line 13: <connectionStrings configProtectionProvider="RsaProtectedConfigurationProvider">
Line 14: <EncryptedData Type="http://www.w3.org/2001/04/xmlenc#Element"
Line 15: xmlns="http://www.w3.org/2001/04/xmlenc#">
Line 16: <EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#tripledes-cbc" />
Source File: C:\www.songtouch.com\web.config Line: 14
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
 

A:Configuration Error While Visiting Certain Sites?

*bump*
 

1 more replies
Answer Match 40.74%

I have a COMPAQ laptop,Windows XP Home Edition
Each time I start up my computer, the following message shows up:

"You have used the System Configuration Utility to make changes to the way Windows starts. The System Configuration Utility is currently in Diagnostic or Selective Startup mode, causing this message to be displayed and the utility to run every time Windows starts. Choose the Normal Startup mode on the general tab to start Windows normally and undo the changes you made using the System Configuration Utility."

I have already checked the "Normal Startup" box but after restarting, the message pops up again.
I can't even connect to the internet, and my anti-virus doesn't detect anything bad. HELP PLEASE!!
 

A:System Configuration Utility error

9 more replies
Answer Match 40.74%

Hello! I installed HP BCU because i want to do stuff with my computer. You know... Anyways, every time i start it, it stays open for like half a second then closes. I recorded it, and at the end it shows the message: "<Warning> msg="BCU return value" real="17" translated="17" />" That is what it says right before it closes. Please help me. Thank you for your time, and have a great day!

More replies
Answer Match 40.74%

M52 ( IBM Desktop)

Windows XP OS

When i start my computer... it is giving 2 beeps... n then getting
0662 configuration change error...

later cheching mac address...

how to get rid of this error...


i tried to enter in BIOS... selected restore default settings... saved n exit... but still problem is there...

any help appreciated...

Regards,

A:0662 Configuration Change Error

I work on several of these. Really bad design. Very crowded, no air circulation (heat) and underpowered (poor voltage=hard drive errors, system file corruption, etc...)
I assume you've tried this procedure:
http://www-307.ibm.com/pc/support/si...F06-D0212.html

If the settings do not "stick" I would do the following:

Reseat the RAM.
Remove CMOS battery, clear CMOS (test battery while it's out. If it's low, replace it.)
Try disconnecting all peripherals (hard drive and optical drive) and see if the problem changes or stays the same.
If you can't get the symptom to change at all, I'd try reflashing the BIOS as a last resort. The motherboard might be bad. Might be power supply. Those power supplies cost more than the whole box is worth. Is this your machine?

2 more replies
Answer Match 40.74%

The last time i played sims 3 was last night. I fell asleep with it on and when i realized what happened i tried to save it and shut down. No actions could be done it was froze, so i restarted and tried to play again and got error

Error Parsing
C:\Windows\Microsoft.NET\Framework\v2.0.50727\config\machine.config

Parser returned error 0xc00ce556.

I dont know ANYTHING about computers please help!!!
 

More replies
Answer Match 40.74%

I keep getting this error message at start up. It gives me the option of F1 to resume or F2 to enter set up. When I hit F1 it starts fine enough but I'm concerned about this. Follows is a start up list report and then a hijack this log.

start up list log

StartupList report, 4/15/2006, 8:49:48 PM
StartupList version: 1.52
Started from : C:\Program Files\StartUpList\StartupList.EXE
Detected: Windows XP SP2 (WinNT 5.01.2600)
Detected: Internet Explorer v6.00 SP2 (6.00.2900.2180)
* Using default options
==================================================

Running processes:

C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\GWHotKey.exe
C:\Program Files\MusicMatch\MusicMatch Jukebox\mmtask.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\Program Files\Logitech\MouseWare\system\em_exec.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\WINDOWS\system32\ctfmon.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\PROGRA~1\Symantec\NORTON~1\GHOSTS~2.EXE
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
C:\WINDOWS\system32\utilman.exe
C:\Program Files\StartUpList\Startu... Read more

More replies
Answer Match 40.74%

I have previously been able to print an email in Windows Live Mail. I can print Internet pages and saved documents. Brother Printer support suggested I have a configuration error.

Any suggestions?

Thanks!

A:I have a configuration error that is preventing me from printing.

If you can still print from other applications but not Live Mail then it sounds like something's wrong with Live Mail accessing the printer. Maybe a re-installation of Live Mail is necessary.
My guess is if you provide more info on what exactly it is that keeps you from printing you'll get more feedback here.
Is there an error message? Or any other info to go by?
A print option dialog screen with a number of installed printers etc?

3 more replies
Answer Match 40.74%

My Father-in-Law brought over the computer we gave him for Christmas and said it was not working. I started it up and got this message "your system has detected a configuration error. Please report this error to customer care...blah blah" I tried a system recovery but it had no effect. I tried clearing the cmos and that had no effect either. I tried using the recovery cd's that I made for it and got a message saying the cd's were not for the correct model?!?!?! What is going on here?

PC Info:
HP Pavilion a430n
XP sp1

Any help would be appreciated, Thanks in advance

-Nate
 

A:Solved: Help with System Configuration Error

12 more replies
Answer Match 40.74%

I can not get past the disk config
the error I get is: Windows could not set a partition to active on disk 0
error0x80300024
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SetupUILanguage>
                <UILanguage>en-us</UILanguage>
            </SetupUILanguage>
            <InputLocale>en-us</InputLocale>
            <SystemLocale>en-us</SystemLocale>
            <UILanguage>en-us</UILanguage>
            <UILanguageFallback>en-us</UILanguageFallback>
            <UserLocale>en-us</UserLocale>
        </component>
        <component name=&quo... Read more

More replies
Answer Match 40.74%

I have a Compaq Presario SR1303WM Desktop running XP home edition and just recently installed a Linksys wireless adapter. I had some headaches with the adapter setup but I've been off and running for a while now and all of the sudden today I started getting a constant error message sound - but no error message along with it. I thought that it may be associated in some way with the adapter considering I had been getting some error messages concerning the adapter upon start up but I never really had any issues. I've tried many different things - changed some of the start up programs, cleaned the registry, ran a virus scan, etc. and nothing has worked thus far and I'm about to pull my hair out.

HELP!!!

A:Help! Constant error message sound with no message...

go to control panel > admin tools > event viewer > under system and application, do you see anything that happened at that same time you heard those sounds?

3 more replies
Answer Match 40.74%

The connection to the server has failed. Account: '67.228.224.122 (1)', Server: '67.228.224.122', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 10061, Error Number: 0x800CCC0E


ABOVE is the error message I am getting using Windows Mail- I can't seem to send or set up my account properly, even though it seems I have entered all the correct information.
Please help if you can.

A:Error message relating to sending message- HELP PLEASE!

Hi and welcome to Vista Forums!

Are you using a software Firewall or hardware Firewall that block TCP port 110?

5 more replies
Answer Match 40.74%

I have a slow home computer that I'm trying to fix.  My specs are listed at the bottom.  It slows down considerably after I use the computer for about an hour.  But I also get this message from Internet Explore Security consistently:  dw20.exe
 
=========================
A website wants to open web content using this program on your computer
 
This program will open outside of Protected mode.  Internet Explorer's Protected mode helps protect your computer.  If you do not trust this website, do not open this program.
 
Name:  dw20.exe.
Publisher Microsoft Corporation
=======================
 
When you push either allow or don't allow, the response is the same.  The website goes offline. 
 
After that, another message comes on from IEXPLORER.EXE - Application Error
 
========================
Process ID=0x158c (5516), Thread ID=0x369c (13980).
 
Click OK to terminate the application.
Click Cancel to debut the application.
========================
 
Whichever is chosen, the computer begins to slow down drastically. 
 
 
 
=============================
My Specs::
 
(1) Dell XPS 8500; 3.4 GHz; 12 Gb RAM; 64-bit OS; 2 Tb HD
(2) Windows 8.1 2013; Kaspersky 2014 15.0.1.415©; Comodo Firewall 8.1.0.4426.  
(3) Have run free versions of:  MalwayreBytes; Super AntiSpyware; HitmanPro; JRT; FRST64; FSS; MiniToolBox; rkill; tdsskiller

A:dw20.exe Message Followed by an Applilcation Error Message

Hi techgnosis Just so you know, FSS and FRST are reporting/logging tools when used in scan mode only, so they won't fix anything unless instructed otherwise via a fix-list. Thus, I do not suggest you to attempt doing a such thing without proper training since you could easily mess up your whole system with that. Let's take a closer look at these errors.MiniToolBoxDownload MiniToolBox and move the executable file to your Desktop;Execute MiniToolBox and check the following options:List Installed Programs;List Last 10 Event Viewer Errors;List Devices - Only Problems;List Users, Partitions and Memory size;Once this is done, click on Go and wait for the scan to complete;Once the scan is complete, a log will open. Please copy/paste the content of the output log in your next reply;

13 more replies
Answer Match 40.32%

Hello,

I've searched so many times on the internet about this I've lost count. I have been on every website possible and I still can't find a solution. Everytime I click on my Samsung New PC Studio or my AVG software, I keep getting this message: "The application has failed to start because its side-by-side configuration is incorrect. Please see the application log for more detail". I've tried numerous things, including going on Command Prompt, System Restore and I've tried downloading various packages but I still cannot find a solution to this problem. I've been trying to solve this all day but I've had no luck.

Please help,

Charl

A:'Side-by-side configuration is incorrect' message.

Carl,
I will notifiy our expert; until then, hopefully this will help
side by side configuration

29 more replies
Answer Match 40.32%

i've had a heck of a time getting my PC to work properly since i accidently loosened my PCI tray when trying to install a new video card. because of that, my original modem quit working. i've since finally got the video card working and my other modem working by juggling PCI slots and re-installing drivers.

but now every time i start my PC, i get a nagging "plug and play configuration error" that won't let me get into windows until i push f1 or f2. i tried f2 once, but couldn't make heads or tails of the technobabble.

today i tried removing the onboard video card from my system, but now my PC is trying to reinstall it! no means no! aside from that, i'm still getting the erros.

where and how do i fix these errors, and make my PC quit trying to reinstall hardware i don't want it to use? as far as i'm concerned, when i shut something off, my PC should OBEY and not argue with me.

i searched all over to find where i could turn that darned card off as win 98 won't let me remove it in control panel>display (which should LOOK like a control panel and not a toolbox which is why i can never remember what it's called) which also has a second driver for my new video card as i made the mistake of installing the driver before the card the 1st time. maybe THAT is the error, but i can't find anyplace to remove video drivers like i could for modems.

by the way, why won't win 98 let me send a shortcut for my control panel... Read more

A:plug and play configuration error win98

16 more replies
Answer Match 40.32%

Yes im trying to resolve a systems configuration error code purple. computer is a compaq desktop windows xp 3 thats quite old .no new hardware has been installed but on startup i get that message.read a lot of post on this but cant resolve this.lost my copy of the OS.when i run safemode recovery no luck there ,then i did a destrutive recovery,that i dont think i should have done.would that complicate things with out haveing the orignal os cd. i would appreciat any updated input or ideas on the systems configuration error code purple
 

A:systems configuration error code purple

When exactly do you get the message? Is it before Windows starts to boot? How does the message appear? Is it white lettering on a black background?

Does the machine boot? If so, how (What do you have to do after you see the message to get it to boot)?
 

2 more replies
Answer Match 40.32%

I apologize if this post appears disjointed, I can't seem to get the browser to properly show spacing.So I was browsing the internet normally, then all of the sudden, I'm disconnected. When I reconnected, I was able to access the network, but unable to connect to the internet. After attempting to diagnose the issue, I got the "There may be a problem with your Domain Name Server Configuration." ... can't connect to well known host microsoft.com.

I know the server isn't down, since I can use another computer to access the internet. I've tried flushing the DNS cache, I've tried inputting the DNS IP manually, I've tried uninstalling and reinstalling the driver, nothing worked.

I don't have access to the router, as I'm using a Motel network. Iím using Vista SP2, I am using a Netgear Wireless Adapter: WNDA 3100. Shown below are the results of Ipconfig, and NBTSTAT -N.

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\Lilliana>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Lilliana-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E ... Read more

A:Vista: Domain Name Server Configuration Error

11 more replies