Tech Problem Aggregator

Firmware update did not completely repair my computer.

Q: Firmware update did not completely repair my computer.

After installing the lastest firmware update via Linux usb tools to my SDD (Vertex 3 Max IOPS) problems with freezing seem to still persist.

The only difference is that, instead of having the rotating blue wheel (the thing that tells you something is loading) and windows explorer going white (meaning it's stopped responding) - the system simply totally freezes. Not even mouse movement works anymore when it happens. No error messages, no BSOD, nothing. It just totally stops.

What else could my problem be? I'm using a new user account since it seems to buy more time before a freeze happens by doing so (since it has less things to load I'll guess).

Here are my specs :

Computer type : Origin EON17-S (Clevo P170HMx) (Laptop)

Purchase Date : August 2011

Windows 7 Ultimate x64

Overclocked Intel Core i7 Extreme 2920XM (Sandy Bridge) 4.1 - 4.8Ghz (though it reads as 2.5Ghz on most things...) [Intel? HM67 Express Chipset Family]

16GB Dual Channel Kingston Hyper-X DDR3 SDRAM @ 1600Mhz

Overclocked NVIDIA 580M GTX (Driver 301.42)

OCZ Vertex 3 Max IOPS SSD (OCZ-VERTEX3 MI) (Updated firmware to v2.22)

Secondary 750GB HDD (ST950420AS)

Intel Centrino Advanced-N 6230

Edit : I'm currently looking through for updates to other hardware on my system.

A: Firmware update did not completely repair my computer.

The very first thing you should do is set everything back to stock speeds. You are lucky that the firmware flash went through successfully. Set everything to stock speeds and see how that runs.

2 more replies
Answer Match 57.96%

Hello.

I am not any good at PC and I desperately need your help! I turned on my computer after a friend of mine had done some clean up stuff, and this box with options appeard. I think it was something about which programs to run when i start the computer, and I think I cliked for the option with as few programs running at startup as possible. This was a very bad idea.

When the computer restarts everything is "gone". The old design of windows is used (although i managed to get the Win7 design back through help in here), it is not possible to adjust the brightness on the screen, there is no way i can connect to the internet (the "connect to the internet" icon is gone, and everything i try is impossible as if this computer never was set up to connect to the internet at all haha) and it seems like the computer wont "save" battery, if I remove the charger it will die (the battery is not bad).

Im sure theres a bunch of other things that doesnt work aswell. It seems like everything except a minimum is removed or something. I really hope someone can help me!! Possible to "regret" changes f.ex?

A:Computer completely stripped for fuctions after update

Hi and welcome to SevenForums!

These options you got, did they appear at boot or at Windows startup? Maybe you're running Safe Mode without networking. That's a limited configuration. Here's more information including how to get back to Normal Mode: Safe Mode

Or was it perhaps msconfig? Just type msconfig in the Windows start/search field, and press Enter. Set the Startup selection to Normal startup if it isn't selected. But check Safe Mode first.

2 more replies
Answer Match 53.76%

Can a Firmware Update and/or drivers on printers be reversed?I am new to BleepingComputer, so I do not know which Forum to post this to, as this issue involves multiple forums: Hardware (HP Printers), Software (Firmware & Drivers), Operating Systems running Windows 2000 and Windows XP.At my workplace, we have many HP Printers on the network. HP sent me a link promoting HP Easy Printer Care. I figured I would try it (big mistake) because I take care of all of the printers in our building. So this Easy Printer Care tells me that there is updated Firmware for my printers. So I get the firmware and install it. Of course, HP didn?t really explain how to install it. I had to look it up to actually do the install. After installing it, HP tells me that the Firmware Updates still need to be updated!?!Now the end users are having problems when they print. Multiple users are having the same and or different problems. The problem that has the most reports to me are: When someone is printing a document and they want to change it from portrait to landscape, they click on properties and receive an error message that reads:Function address 0x2e2a5aa caused a protection fault. (exception code 0xc0000005) Some or all property page(s) may not be displayed. Click OK.Then another windows pops up saying: Operation could not be completed. Click OK.The function address is always different (for different users or systems) The exception code is always the same. The User c... Read more

A:Can A Printer Firmware Update And/or Driver Update Be Reversed?

You can go to Device Manager and find the printer and in properties it gives you the option to "roll back" the driver to a previous version. A firmware update and driver update mean 2 different things, to me anyways. My understanding is a firmware update offers "improved" instructions to the onboard chip of the device. What does HP say about the problem?
Mark
'

3 more replies
Answer Match 53.34%

To my knowledge, when an OS such as Windows 8.1 is booted, all firmware/bios drivers are replaced by more appropriate OS drivers in the boot drive during start up. I learnt this happens for the latest versions of Windows. Am I right? Do all bios drivers get replaced? Does this happen with the latest versions of OS X as well?

If this is so, then you can discard firmware as suspected of causing problems on a computer that's already booted up. Unless there's a problem that's causing a driver to remain in RAM after boot.
 

A:Does firmware drivers get completely replaced by OS drivers after boot in OS X and Windows?

No...
 

4 more replies
Answer Match 51.24%

I periodically check the website for my router to see if there are any new firmware updates. I checked it today and every time i try it says :
A New Version is Found. Do You Want to Upgrade to the New Version Now?

Firmware Version:
Current VersionV1.2.0.8 New VersionV1.2.3.7

I click Yes.
It then tells me that the update failed.
Any suggestions?

I am running an XP machine.
I have Verizon DSL.
I have a Westell model 2200 modem and a netgear wnr2000 router.

Any other information you need i will try my best to provide. Just ask.
Thanks
 

A:Can't Update Firmware

9 more replies
Answer Match 51.24%

Okay I want to update my DVD-rom Driver due to it having a difficulty playing LOTR-FOTR Special Edition.
Here's a link to LG's site http://ca.lgservice.com/index_b2c.jsp Link doesn't work.Got to www.lgservice.com than to Canada,than to device driver,dvd-rom,scroll down to LOTR-FOTR Special edition.Will tell you there.
Now I know that I have to download the files from www.bootdisk.com for Dos. 6.0.After I do this do I double click on the files,from Bootdisk.com and send them to a floppy disk?Than after that the 2 files from LG's site I put on this Bootable Disk?
Restart the computer type in the command and let it go?
If I do this wrong is there anyway of screwing up my Bios,I have a Dell computer and don't want to screw anything.
The Lg Dvd-rom I bought seperatly and installed myself.
Someone help me on this or was the above correct??
 

A:Firmware update....

6 more replies
Answer Match 51.24%

I don't know much about firmware updates as I never had to do it but my DRW-2014L1Tburners are giving me some coasters in vista x64. Not 1 coaster under Nero 6 in xp pro.

I got the driver update listing in the sticky, went to the asus site to check on a firmware update for my burner's for x64 vista and there are 3 hopefully that will eliminate the coasters.

My question is: If I get the updates for the 64-bit vista will that interfere with those drives when I use xp pro ?

thanks,
kevin

PS: I use swappable drives; switching between vista x64 and xp pro.
only keeping xp for gaming and Nero 6

A:cd/dvd firmware update ?

Originally Posted by kem


I don't know much about firmware updates as I never had to do it but my DRW-2014L1Tburners are giving me some coasters in vista x64. Not 1 coaster under Nero 6 in xp pro.

I got the driver update listing in the sticky, went to the asus site to check on a firmware update for my burner's for x64 vista and there are 3 hopefully that will eliminate the coasters.

My question is: If I get the updates for the 64-bit vista will that interfere with those drives when I use xp pro ?

thanks,
kevin

PS: I use swappable drives; switching between vista x64 and xp pro.
only keeping xp for gaming and Nero 6



no the firmware should be backwards compatible

5 more replies
Answer Match 51.24%

Could someone please tell me the manufacturing web site for MATSHITA CD-ROM CR-586 and OPTORITE CD-RW CW4802 so that I could do a firmware update??????????????????????????????????????????
 

A:Firmware Update

16 more replies
Answer Match 51.24%

I have installed Open Wrt Bin file on my WR703N Mini portable wifi device. After that it doesn't broadcast WiFi Signals. But Through the LAN cable and using ftp i can connect the Flash memory. Please anyone can help me to Update to my Old Firmware version using FTP. I have my old firmware version's bin file. Pls help to me.
 

More replies
Answer Match 51.24%

I have Aspire E 14. Last night, I saw I have 1 critical update for firmware v1.17. When I clicked the update button it just says "updating" It just goes on and is not stopping. I closed the portal and a window appears saying reflashing. I saw it did reflash up to 100%, but why won't the critical update notification disappear on Acer Care Center portal? I also checked update history and the firmware is not yet included. I tried it again the next morning, clicked the update button, but still, it just says updating and can go on until you close the portal.  Any solution? Did my Aspire really did reflash? It seemed nothing has changed. Thanks in advance!

More replies
Answer Match 51.24%

Trying to update firmware on blu-ray but frm file will not write in Vista says I need supported writing software. What exactly do I need to do this?

More replies
Answer Match 51.24%

O.K. when originally wanting to do an Upgrade to Windows 8 i used VM to check it out.When i decided after alot of research to do the upgrade i used Windows 8 upgrade assistant.The message i receved on compatibilty was only one problem.Your PC Firmware doesn't support secure boot so you won't be able to use it in Windows 8.Secure boot requires firmware that supports UEFI v2.3.1 Errata B and has the Microsoft Windows Certification Authority in the UEFI signature database.Sure anyone who has UEFI like me received this message using this upgrade assistant.Through many hour and days of research on internet and other forums nobody seems to know how i can update my firmware,neither ASUS could advise me or Microsoft.To me i figured it should be a BIOS update,but no new ones are available for my system.So since i had no answers i decided just to do an install of Windows 8 Pro 64 bit (clean install) works well,faster then Windows 7.So far i like it.Only clue i have at this point was a site i found.Knowing my BIOS is a American Megatrend http://www.ami.com/Products/BIOSandEFIFirmware/AptioV/  Not sure if this is an answer to be able to do a UEFI install of Windows 8 Pro again to get full use of secure boot,GPT Partitions,but this is closest clue i got.BIOS stuff and flashing it can always be risky,rendering the motherboard inoperable,causing major issues,that i do not want to do.If anyone knows anything on this and can help with it would be very much appreciated i am stumped on thi... Read more

More replies
Answer Match 51.24%

I have an Olympus Evolt-500 that won't update the firmware. I'm running XP pro with a DSL internet connection. I've talked to every tech support person Olympus has and they don't have a clue what's wrong.

It will recognize the camera and lenses but it will download from 50% to 83% of the firmware update, then a message pops up and says no connection to server and everything shuts off. They had me try the download with no firewall on and using just the modem no router. I've used Olympus Viewer, Olympus Master and Olympus Studio Trial version and they all download about the same amount before they shut down.

I'm open to suggestions at this point.
 

A:Can't update firmware

14 more replies
Answer Match 51.24%

Hi,

I have a Gigabyte CD-RW. model GO-R5232B. I downloaded a zipped Firmware of the same model from the Gigabyte website. Is it safe to update my hardware with this firmware even it has not encountered any problems for the past two years?

Tony
 

A:When to update Firmware?

9 more replies
Answer Match 51.24%

Hey guys I have a Samsung SH-S222L. Should I upgrade the firmware to SB02?
 

A:Should I update the firmware?

Are you having a problem the firmware upgrade corrects? If not, leave it alone.
 

2 more replies
Answer Match 51.24%

ok ive checked a bunch of sites and i wanna get my routers firmware to 3.43 so that it'll be primed for halo 3 tommorow. the problem is when i try to download i end up with a 505 error message saying: failed to change directory

Can anyone help?
 

A:DI-614+ firmware update

7 more replies
Answer Match 51.24%

Im not sure how to update my firmware. Im having trouble burning CD-Rs with nero 7.0 because it keeps coming up with this calibration error. I posted that thread in this same forum ( http://forums.techguy.org/multimedia/453562-nero-issues-data-disks.html)
but it just leads to this new question about updating my firmware because it might be a possibility. Im also running SP1.

I went to this page called "the firmware page" link- (http://forum.rpc1.org/dl_all.php) and searched for my Disk Drive but had no luck in finding it. Even if I were to find it, how would I go about updating it, and how can I tell if its up to date?

Im running win XP and it is a Toshiba Qosimo laptop e15-av101
I looked in my computer/cd drive/ properties to see the name of my drive and hopfully I have the right one, it is a

MATSHITA dvd-ram UJ-830s.
 

A:How do I update my firmware?

16 more replies
Answer Match 51.24%

Hello, I have recently purchased an "Onyx Portable Media Player" by "Mach Speed Technologies". I installed the included drivers and software and am currently upgrading the firmware. The update window says "SigmaTel MSCN Firmware", so I'm assuming it's licensed by SigmaTel. It's updating from version 000.000.000 to 880.282.433. The window's progress bar seems to be stuck at "Initializing", with no advances made in the main progress bar but the smaller one constantly filling and then refilling. Is this just going to take a long time or is there something wrong?

I can provide a screenshot if needed.
 

A:Firmware update

Is this the media player firmware or motherboard?
Why did you feel the need to upgrade the firmware?
 

3 more replies
Answer Match 51.24%

I have Aspire E 14. Last night, I saw I have 1 critical update for firmware v1.17. When I clicked the update button it just says "updating" It just goes on and is not stopping. I closed the portal and a window appears saying reflashing. I saw it did reflash up to 100%, but why won't the critical update notification disappear on Acer Care Center portal? I also checked update history and the firmware is not yet included. I tried it again the next morning, clicked the update button, but still, it just says updating and can go on until you close the portal.  Any solution? Did my Aspire really did reflash? It seemed nothing has changed. Thanks in advance!

More replies
Answer Match 51.24%

hi everyone. I would like to know if i should update the firmware on my ssd. It is not brand new, maybe 3 yrs old. ocz technology. I have neve done this. So i need to know how to figure out exactyly what i have and if i even need to.

any help would be much appreciated

A:update firmware

I don't see any harm in updating firmware. But please identify the firmware that you would like to update and what exactly are your doubts about doing it.

9 more replies
Answer Match 51.24%

Laptop is a Dell Vostro 1000 with XP Home SP3. Just installed a Crucial SSD. Works great. Tried to install a firmware update; not so great. Following the instructions from the Crucial site, I downloaded the update (it's an ISO file) and burned it to a CD. In the BIOS, changed boot order to CD drive first. Restarted the laptop. No joy - Windows still boots to the desktop. What could be wrong? I know almost nothing about using ISO files. TIA.
 

A:SSD Firmware Update

CD-image ISO files have to be written to CD in a special way, if you just copied the ISO file to a CD like a normal file, that won't work. There's a free app for creating a CD from an ISO file, it's called IMGBurn: http://www.filehippo.com/download_imgburn/
 

2 more replies
Answer Match 51.24%

For those with any of the following, OCZ has issued a series of firmware updates for the OCZ Vertex 3, Vertex 3 Max IOPS, Agility 3, Solid 3 and RevoDrive 3 bringing the firmware towards version 2.22,

OCZ Technology

For those with Windows installed on it the USB stick method works very well (and easy to set up),

NEW! - Bootable tools for OCZ SSD's

List of resolved issues (as well as a direct download link) can be found here),

OCZ Vertex 3, Vertex 3 Max IOPS, Agility 3, Solid 3, RevoDrive 3 2.22

A:OCZ SSD Firmware update for...

Thanks! My Agility 3 will appreciate this.

1 more replies
Answer Match 51.24%

Dear Users,
Netgear WGR614 v7
Please advise on why I can't update the firmware. Every time I get the message that the upgrade has failed.

Arturo
 

A:Firmware update

13 more replies
Answer Match 50.82%

As we all know if windows fails to boot due to some sort of error it will boot into a repair utility. I would like to find out if there is anyway to automate that process so that no one has to actually be sitting in front of the PC/VM and select the startup repair tool and click "finish" when its done. I want to take the human interaction out pretty much. I there a way to do this?

A:How to completely Automate the Windows Repair tool

My department administrates a lot of 2008 R2 and Win7 VM's. The way these systems are configured they are are headless (no direct human interaction with the OS itself). I wanted to know if there is a way to make the startup repair tool automatic so no one has to actually tell it to enter the startup repair utility. I want it to do it on its own: repair the issue, and then boot into windows. Is this possible?

1 more replies
Answer Match 50.82%

Hi everyone. First let me say thanks for reading my post as I am almost literally pulling my hair out with this problem.

Everything started when my PC froze and I had to restart by cutting the power. It had been having problems before this as it was hanging at startup among other things such as shutdowns and such.
I then tried to do chkdsk/fixmbr to fix things which didn't help.. it appeared that somehow my startup was corrupted somehow.

Tried to run a repair install but option wasn't available.

Tried to rebuild registry by backing up system32 files like I have done before on another pc..

Tried to restart XP but only got past splash screen where it said "welcome to XP" and then it hung there indefinitely

Tried once again to use bootcfg but now it doesn't even show my windows installation.

Now trying chkdsk/fixboot/fixmbr AGAIN. I'll let you know if this works.. but does anyone else have ideas? This is driving me absolutely insane because I have no idea what is wrong with it.
The hard drive is less then 1 month old, I am 99% sure it is not the RAM, I am only running 1 stick of it right now and it is fairly new as well but has always worked in my pc.
Any help would be greatly appreciated. Thanks so much.
 

A:Solved: Completely messed up my 64 bit XP Install, Help Repair It if you can please!

6 more replies
Answer Match 50.82%

HP-Update FIRMWARE update problem?
I got some critical update for my Seagate 320 gb hard drive?s firmware. I went to download an process the update, later it asked me to insert a blank disk. Well I don?t have a blank disk but I hit bootable cd anyway thinking it would create some file on the hard drive. Well obviously that?s not what it had in mind because my disk drive opened, I shut the disk drive and it started saying writing data to disk. HOW could it do that with no disk. I couldn?t close it. It then said installation succesfull. What the heck. I restarted my computer to see if I had screwed up my system and it seams to be running fine. Have I screwed up my hard drive? Did the dang update install? Can I delete these firmware updte files lying around on my desktop? Please help me????

A:HP UPDATE FIRMWARE update problem?

Originally Posted by GreatNate


HP-Update FIRMWARE update problem?
I got some critical update for my Seagate 320 gb hard drive’s firmware. I went to download an process the update, later it asked me to insert a blank disk. Well I don’t have a blank disk but I hit bootable cd anyway thinking it would create some file on the hard drive. Well obviously that’s not what it had in mind because my disk drive opened, I shut the disk drive and it started saying writing data to disk. HOW could it do that with no disk. I couldn’t close it. It then said installation succesfull. What the heck. I restarted my computer to see if I had screwed up my system and it seams to be running fine. Have I screwed up my hard drive? Did the dang update install? Can I delete these firmware updte files lying around on my desktop? Please help me????



It is ok.

I dont know what happened, but You HAVE to burn the bootable disk, and then boot into it after a restart in order to update the firmware.

22 more replies
Answer Match 50.4%

Hello all I have problem that I couldn't start windows(Only in safe mode) I recently installed HDD firmware(Barracuda Green Firmware Update) My disk is st1500dl003-9vt16l AND i recently installed MYSQL "mysql-5.5.8-win32.msi" I think problem is with HDD update ? And I don't want to refresh PC because there is Imporant job on some programs left.

A:PAGE_FAULT_IN_NONPAGED_AREA After HDD firmware update

Uninstall Mysql and see if that fixes your issue. if not, I suggest you contact Seagate support because they do warn that firmware upgrades can damage data on the hard drive if procedures are not properly followed. Good luck.

1 more replies
Answer Match 50.4%

Ye hi i have downloaded from Zyxels home page the latest Firmware and now my question is how do i update it? Because when i open the containing folder i have three files bin, pdf and rom. In the pdf theres just some information about what is new in the update and so on, but how do i open the two other files, i mean they are too small to be burned on a disk!!
 

A:Zyxel Firmware Update

You perform the firmware update from within the router's web user interface. Log into the router and there should be a option under one of the menus to upload new firmware to the unit.
 

3 more replies
Answer Match 50.4%

When I receive this drive will the Firmware have to be updated before use or, can that be done later on if needed? Thanks! SAMSUNG 840 Series MZ-7TD120BW 2.5" 120GB SATA III Internal Solid State Drive (SSD) - Newegg.com

A:Firmware update question on ssd

Hi,

You can update the firmware before or after, I would suggest it would be better doing it before

This version improves write performance, which is version 1.0,
click on firmware to view (you may be up-to-date):

http://www.samsung.com/uk/support/model/MZ-7TD120BW-downloads

Hope this helps

Cheers

Dave

1 more replies
Answer Match 50.4%

I see there's a firmware update out for the C50-30 with security updates noted in the changelog. Has anyone updated the firmware on a C50-30? Did it all go according to plan and the enclosed instructions? More importantly -- if it went wrong, how easy was it to recover?

More replies
Answer Match 50.4%

I know this might not be the place for this question but i have just downloaded a Firmware update for me modem but the files came in .rom and . bin and i am unfamiliar with these files how do i open them or with what do i open them with???

A:Firmware update for my modem

Your modem will open them. In the firmware update page, it will ask you to point to or upload the firmware file.

2 more replies
Answer Match 50.4%

Hi All: Just purchased a LG GSA-4167B using a USB 2.0 connection via an USB 2.0 External Enclosure. The firmware version that came with the drive is version DL10. There are later firmware versions available, DL11, DL12 and DL13. I would like to update to the latest version, DL13. Can I do it by downloading the DL13 zip file and just unzipping it or will I have a problem because it is using a USB external connection. There are no instructions on the LG download site for a USB connected firmware update. Any insight would be most appreciated.
Thanks,
Patrick
 

A:LG GSA-4167B USB 2.0 Firmware Update ?

7 more replies
Answer Match 50.4%

Hello, I am trying to use a Thunderbolt 3 to Thunderbolt 2 adapter (StarTech brand) to connect my P50 to a Resident Audio T4 Thunderbolt audio interface. The device is briefly detected and then disappears. I have been doing some research to resolve this issue and a few users have said that updating thier Thunderbolt NVM to 18 add compatibility with the adapter.  Would it be possible to get an upgrade from the current NVM16 to NVM18? Current P50 firmware (NVM16) link here:http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-p-series-laptops/thinkpad-p50... I have already attempted to install the NVM18 firmware straight from Intel but it looks like the firmware is OEM specific. Thanks!

More replies
Answer Match 50.4%

I did what it said to do in the instructions (I thought) and now my computer won't recognize the external backup. Here is the link to the enclosure.

http://www.startech.com/item/SAT352...ATA-External-Hard-Drive-Enclosure-w-RAID.aspx

How can I reflash the thing if I can't see it?
 

A:Firmware update problem

Try the external enclosure on another computer. Was the enclosure configured in a RAID configuration?
 

5 more replies
Answer Match 50.4%

Can't seem to find an answer to my question - Does the firmware update mean I have to reinstall windows? I have done firmware updates on other devices in the past, but not on a "boot" device, so just need an answer.

Edit: According to samsung it does not wipe HD, but just wanted people who have done an "inplace upgrade" to answer.

Edit: It worked fine through magician.

More replies
Answer Match 50.4%

I am trying to update but after some time it shows fail. firmware v 1.17 to improve touch pad

A:firmware v1.17 update failed plz help me

laptop model?which windows OS version is installed?

5 more replies
Answer Match 50.4%

I have a netgear wnr1000 v2. I have been in the router settings and had it check for the latest firmware. It tells me I have the latest and that version is 1.0.0.12NA. Now, when I go to the netgear website and look up my router here: http://downloadcenter.netgear.com/ it says the latest version is 1.1.2.54. So I download it and go to install it to my router and get the error "Firmware upgrade failed. Please check your file." I know it's the right file. Only 3 files are in the installation and they are .html, .img, and .txt, and the image file is the installation one.
 

A:Router Firmware Update

16 more replies
Answer Match 50.4%

please help me to find dvd ram uj8c2 firmware new version. Because l can't write any cd while i had upgraded to windows10.it's  shows power calibration error by nero softwear.my dvd ram current firmwear shows 1.00

A:dvd ram uj8c2 firmware update

I have the same problem. Does anyone know a solution?

1 more replies
Answer Match 50.4%

Hi, Samsung tells me the SSD (a Samsung) firmware updates will come from Lenovo, but I didn't see them on the driver page. The model is MZMTE256HMHP-000L1 Any suggestions? Thanks,Bruce 

More replies
Answer Match 50.4%

Hi, I have an issue with an E560 that is hooked up through a OneLink Pro to two external monitors (via Displayport and DVI). Both monitors randomly go black for 10-15 seconds and then come back (not at the same time). https://support.lenovo.com/ca/en/documents/ht101596 indicates that the firmware needs to be updated; however, after downloading the .exe for the latest firmware, I can't get the file to run! After I click on it, nothing happens. There is nothing in the task manager. I've tried running as Administrator and still nothing. Has anyone had any issues with the update tool or have any suggestions? Thanks, Andrew

More replies
Answer Match 50.4%

Hi, i bought this network attached storage drive from Maplin Dual SATA Network Enclosure : Network Enclosures : Maplin

I tryed updating the firmware and got some message in German about how if i updated the firmware the network connection would be lost. i clicked ok and now after rebooting my drive cannot access it. i have reset it and cannot try to update the firmware again as there is not USB Port on the drive to access it directly from the computer.

Anybody have any ideas on what to do??

A:Firmware update gone wrong

Newer BIOS chips have what is called a boot block sector. When flashing the BIOS this part is not flashed. Basically all it does is run the floppy drive, and if you are lucky you will also get basic video. I have re-flashed a "dead" BIOS with this. The MB was manufactured in 1998. The first attempt at flashing failed-nothing but beeps on restart. I downloaded the correct Bios update, made a new floppy to flash the BIOS and reran the flash program. There was nothing on the monitor, just a black screen, but I could hear the floppy drive being accessed. Follow the flash utility instructions and let it do its' thing. It took several long minutes, but it worked.

I'm providing this link below. Do not hold me or vistax64 responsible.
Wim's BIOS Page: BIOS Upgrades, Motherboard identification and more...

Finally, you can approach your manufacturer of your PC or bios to purchase a replacement.

6 more replies
Answer Match 50.4%

I have a Toshiba Notebook with following internal DVD-RW drive: "TS L632D T004 Toshiba".

The problem is, this drive doesen't burn DVD+r DL without failures.
I made quite much attempts with 10 DL DVDs und five different burning suites, without success.
So I guess to fix this failure with a firmware update.

Can somebody tell me where I can get this update?

thanks :)

Best Regards,

A:Satellite X - Where to get firmware update?

Hi buddy,

Why should this issue related to the firmware?

In my opinion you should try removing the upper and lower filters in registry. Just follow this article:
http://support.microsoft.com/kb/314060

And firmware updates you can get from the Toshiba website.

1 more replies
Answer Match 50.4%

I am trying to update but after some time it shows fail. firmware v 1.17 to improve touch pad

A:firmware v1.17 update failed plz help me

laptop model?which windows OS version is installed?

3 more replies
Answer Match 50.4%

Helo,   I have issue for updating Me Frimware on my desktop Hp dc7800p small form factor whenever I want to update it an error occour in command prompt showing that'' Error: could not know the last update for Me Firmware '' tell me what can i do .. i have also upadated bios to V 1.5 ...                               waiting for reply                                          thanks.

More replies
Answer Match 50.4%

Hey. I am wanting to update firmware for my dvd burner. I know it is a NEC DVD+-RW ND 3650, but after that i have no idea how (or even if I can) update its firmware. Any help would be great thanks!
 

A:Solved: Update Firmware

8 more replies
Answer Match 50.4%

i have been trying to update the driver/firmware for my pioneer dvd writer, and im having a problem running the software. the drive is the Pioneer DVD-RW DVR-108 and im trying to install the firmware version 1.20 i think its called(filename: DVR108_FW120B.EXE). i follow the vague instructions from pioneeraus.com.au and run the .exe file. and it comes up with a command promp window and i get a dialogue box pop up in front of that titled "UPGDVD" and it says "available target is not found".

i also tried to update the driver through device manager but there is no .inf file that i can find on the net so im pretty sure thats a no go.

if anyone knows a way around this problem or if there is another way to update my driver i would be very greatful if you could help.

im running xp with a P4 3gig CPU with 1gig ram and a 80gig HDD.
cheers
 

A:DVD R/RW Drive Firmware update help

First of all a firmaware update is not a "driver". all optical drives use the windows native drivers and only MS updates that. I have never seen a firmware update as you describe open a command prompt window. if Pioneer actually uses this method then you will probably have to set the command prompt to the location of your drive. ie; type the locaion ( drive letter of the drive you are updating) if your pioneer is the D drive then you would type D:\ and then press enter
 

1 more replies
Answer Match 50.4%

Hi, I have a problem with OneLink+, where DP is not working. I believe a firmware update should fix this. The update.log which is returned from tp_onelinkplus_dock_fw.exe is: Version: 0.00.000Update result: 255Error description: Can't connect to Synaptics VMMxxxx DP hub IC The paradox is that I am trying to update the firmware to fix the DP and firmware won't update unless you have a DP already connected.  In my quest to fix this, I have downloaded many files some of those where for an incorrect model, pressumably the other OneLink. I am now wondering if I have overwritten the firmware of OneLink+ with that of OneLink. Is that possbile?  Is there any other way to fix this?

More replies
Answer Match 49.98%

Good Morning All,

I've posted to this site a few times, with excellent results and fantastic support from the members, thanks so much for all your help.

Here's a new one:

My Crucial C300 has firmware 001....needless to say I've been having some issues, BSOD's, etc...

So, I download all the updates, 1 > 2, 2 > 6, 6 > 7....and follow the Update Guide to the letter...

All is good and fine until I have to set my machine to IDE in order to install the update.
BIOS SATA controller says "AHCI or RAID"....no other options.
Cannot update the firmware. NO drive detected. Tried RAID, just in case. Nope.

I have a Dell XPS 9100, and have an ASUS U3S6 as well, but connected the SSD to the motherboard as the guide said to do....tried all the ports 0-3....nope.

I've set aside the time and patience to update the firmware to 007...as well as reconfigure some things with my system, 'housekeeping', if you will...

How do I get my machine into IDE mode? (And then back into AHCI when the updates are finished) Did I miss something in BIOS?

Thanks again.

A:Trying to update firmware on Crucial C300...

Just a note of caution, I would recommend doing a full system image before updating the firmware especially since you are having issues.
I am not advocating updating the BIOS on the Dell, but have you checked Dell's website and the associated release notes for any/all Bios upgrades?

4 more replies
Answer Match 49.98%

Touch pad is not working also the update firmware v1.17 keeps on failing. Please help. Btw, I'm using Aspire E 14 E5-473-304W.

More replies
Answer Match 49.98%

gang I've been web-searching for updated firmware or a way to do it on Hitachi travelstar internal 2.5" hdd... I have one that is producing frequent read errors, but running chkdsk the drive is 'squeaky clean' from a surface standpoint. I was hoping I might update..... can't find a thing

this drive failed the HP builtin [BIOS] HD tests, short and long, and failed the HGST diags tests, short and long [though the SMART status was all rosey ] Specifically the tests point to read-access failures which produce a string of Windows 7 system 'critical' events since the OS timing is scrambled by fetches that return no response.

nagging in the back of my brain is an ugly scenario: what if the issue is with the Mboard component? what would clue me in that the drive interface is at issue ? disc is a lot more likely I agree but it just doesn't feel like an ordinary disk fail

A:Any way to update Hitachi Travelstar firmware?

Hi there .. The place to look for a firmware update should be the HP website .. Not sure that it will help much though

1 more replies
Answer Match 49.98%

Hi!

It took me almost one hour to find this firmware update for my ADSL modem so that's why I uploaded it to Skydrive and make it hopefully a little bit easier for you.

My modem kicked me of the web a few times every day and then it also had a "broken internet connection" so that there was a little yellow notification triangle on the network adapters icon even if the "internet providers" signal was ok it couldn't connect...

Any how, I updated the firmware and I have been running it for a few days now and no connection problems.

Here is the link and there is also a manual included (and in the comments you can see a really short description on how to update the firmware).
 

More replies
Answer Match 49.98%

This is a follow up in a way. I had asked about the N-routers and how to get good reception in a large house. Based on the responses and reviews of this router Linksys WRT54GL I chose this one router to do the trick with the option of installing another one upstairs to increase coverage if needed. The price of 2 of these was cheaper than one N router or a router and repeater.

The Lisksys software is pretty lame. I was able to get my computer hooked up fairly easily but my roommate could not get online, which is more important as I am on the road all the time and he is stuck at home. I reset the router before I left so hopefully he can get himself hooked up before I get home in 2 days.

The coverage seems great. I get very good or excellent in all corners of the house. I see things about installing a second party firmware to improve it further. Any suggestions about which firmware, and details about how to update and use this firmware?

Thanks
 

A:Firmware update for Linksys WRT54GL

You need to find out why your roomate can not connect. Is it becasue of bad coverage? But, you said the coverage is great. If it is a secure network and your roomate is using the correct password/key, and if the coverage is great, then some setting issue must be dealt with in the roomate's computer.

Why do you need third party firmware for your router? That may not solve your roomate's problem, becasue as I said, it could be in roomate's computer. I have heard using third party firmware on Linksys gives much more features. One of them is to increase the power out of the router. But, again, all those feature may not help you with the problme that your have.

First do this on your computer, then on roomate's:

Start, Run, CMD to open a command prompt:

Type the following command:

Start, Run, CMD to open a command prompt:

Type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.

{credit johnw}
 

2 more replies
Answer Match 49.98%

I have a 1TB Seagate Barracuda ST1000DM003-9YN162 like the one shown on this firmware update page:

Barracuda (1TB/disk platform) Firmware Update

Because i've been having problems waking from sleep mode I wanted to update the firmware on it from my version now CC9B to its current version of CC9D. I downloaded its windows update utility and ran it. Everything seemed ok, it shut down windows, restarted, ran the updater, then it said "FAILED" in big red letters then asked me to go back to Windows. I did, everything was ok nothing got messed up.

Why did it fail to update the firmware? Was it because I didn't have CC9C and it didn't want to skip from CC9B to CC9D? Do I need to update to CC9C first? What should I do?

The update utility says that it cant be run on "RAID Systems". My system is capable of RAID but I dont have a raid setup i use ACHI. Do I need to go into my BIOS and disable something that has to do with RAID? As far as I know I have nothing enabled that has to do with RAID. Any help is appreciated. Thanks.

A:Seagate HDD Firmware update failed. Why?

I suspect that if your drive is not listed here: ALL FIRMWARE UPDATES - see here - Seagate Community Forums
Which I don't see, a firmware update is not needed nor compatible with the update.

Also read this: Does my drive need a firmware update?

3 more replies
Answer Match 49.98%

Hello,
I am trying to update the firmware of my iriver T30. I am using the tool provided by iriver. I am able to delete the firmware from my T30 but I cannot install the new firmware on the T30. It just hangs, and I have to close the program after many hours, and kill the process on my PC and try again with no luck.
Can someone help me?
Thanks
Margarita
 

More replies
Answer Match 49.98%

For some reason the firmware for thunderbolt won't update on my p70. I've tried installing from a command prompt and using the installer. Either way it seems to work but the firmware version doesn't change. I have the hdmi cable connected to a monitor and have the thunderbolt software running. I've rebooted and tried again. I've booted into safe mode then rebooted and tried again. I've uninstalled the thunderbolt controller and tried again all to no avail. Ideas anyone? Thanks in advance.

More replies
Answer Match 49.98%

Hello, I had no problems with the touchpad in my first two months of owning this computer. Recently when I try to use the touchpad, the cursor bounces all over the place and I have no control over it. This is espescially annoying when I am at work and need this to work correctly when I am gathering data in an excel doc. I noticed there was a 1.17 firmware update for the synaptics driver in the care center, but when I click to install it will run for a second and then say "failed". Just updated BIOS and every other driver I could think of but it makes no difference.

A:Touchpad firmware update VN7-592G

Hi ! Have you trying Unistalling the driver for the Touchpad? Must of the times unistalling the drivers and restarting your unit will actually fix the issue. If you access the Device Manager (Press Windows key +X)> Select Device Manager > Mice and other pointer device, Right Click> Unistall> Restart. Some updated on Windows sometimes will disable the proper Drivers for your unit. Hope this could help you!  

2 more replies
Answer Match 49.98%

Samsung has recently posted firmware update EXM03B6Q for the 850 Pro on the download site.
I was unable to update via Magician so downloaded the ISO and ran it from a USB drive.
I was one of the lucky ones who didn't update to EXM02B6Q in Feb of 2015 which was a total disaster.
The update worked without any problems and speeds have not changed at all.
There is also a PDF installation guide for those who like to read first.
Don't forget to image the SSD first just in case. I did not, however loose data but better safe than sorry.

Tool & Software | Download | Samsung V-NAND SSD

Cheers

More replies
Answer Match 49.98%

HI!

I put in my IP address, and get to the modem. I believe there is a way to take my modem out of the mix and update the firmware on my Linksys router, but I'll be darned if I can figure it out. I called Linksys, but they want me to sign up for 90 day tech support, and I need to spend the $$ on a new router if the firmware update doesn't solve my problems! :-/

Can anyone help me?

I have a Motorola SB6141 modem and a Linksys EA6500 router.

Thank you!!
 

A:Want to update Linsys Firmware, but modem in the way....

16 more replies
Answer Match 49.98%

I have a 4-year-old D-Link DIR 601 (cheap) router. It used to put out a little better than 42% (~38Mbps) of the speed I get hard-wired (92Mbps). Last week, that was cut exactly in half (19Mbps) after I made a few changes to the configuration which should have had nothing to do with the speed it delivers.

Questions:
Is there anything I can check in the router's config that might account for the drop in speed?
The firmware is 1.01 and I understand 1.04 is available, but the site asks if I have model A or B. I can find nothing on the labels about A or B. Where would I find that?
I tried downloading the 1.04 update for version A. It's a zipped .bin file which is not executable. How does one apply the update to the router?
The router has a reset button that resets it to factory settings. Could that solve the speed problem, or is it not worth trying?

 

A:Solved: Update firmware D-Link DIR 601

6 more replies
Answer Match 49.98%

Hello,

I would like to update the firmware of my SSD, INTEL SSDSC2CT120A3, but Google gives me results of Intel? SSD 330 Series. I don't know if my SSD model is Intel? SSD 330

A:INTEL SSDSC2CT120A3 firmware update

I would recommend you start here:
Download Intel® Solid State Drive Toolbox

1 more replies
Answer Match 49.98%

Hello
Using dell inspiron 5448 with HDD 1 TB + SSD 8 GB, windows 10, 64 bit working fine.
Found the new Seagate fimware on the dell support as follows

Seagate ST500LM000/ST1000LM014 Firmware Update


File Name: Kahuna V_ZPE.exe
Importance: Recommended


Description: Hard-Drive (47.16 MB)
Release Date: 09 Nov 2016



Version: DEMM/DEMN ,A05
The installation failed on my laptop with an alarm box showing unable to identify the boot partition, please use the USB boot key or CD ISO image of this utility instead.
Confused since installation instruction said just download and it will be automatically installed.
Called Dell but the agent said nothing they could do.
Any suggestions?
Thanks

A:Seagate firmware update failed

I suggest you right click windows logo (or click yellow folder), click and expand 'File Explorer', 'This PC', and then check to see if Seagate update is either in your downloads or documents. If yes, I suggest you open the file and click 'Run As Administrator'.

7 more replies
Answer Match 49.98%

I flashed my Toshiba slim-drive SD-C2502 DVD-ROM with the latest firmware from Dell's website.

After it didn't work and it gives me the IDE #1 error before booting to Windows XP. I know I can eject before the error message but after that, it just doesn't eject at all nor detected.

I tried flashing it again but there is no drive it can detect to flash it. From the past, it seems like no way but I was hoping I can force flash it perhaps?

Any other suggestions would be grateful.
 

A:DVD-ROM not detected after firmware update...is there HOPE?!

Heh. I hate to say it, but I think you're dead in the water. Up the river with no paddle so to speak. It sounds like you're going to have to replace the drive.
 

3 more replies
Answer Match 49.98%

Hey,

I just had a quick question I have a LG CH08LS10 Blu ray drive and I have been having glitches with some Blu Rays namely Terminator Salvation and The Dark Knight they run choppy and stutter. All of my other Blu Rays run fine.

Anyway the software that came with the Blu Ray Drive came with the LG Tool Kit. When I first got the drive I used it to auto look for firmware updates. It found one update to make the drive compatible with Windows 7. It says that the update was successful but I'm unsure whether that's the case or not as I can't find out where to find out which firmware I have right now.

So I have tried everything to fix the stuttering issue with the two Blu Rays. I've updated Java, upgraded the Blu Ray playing software, updated graphics drivers, switched off tons of start up programs and still Terminator Salvation and The Dark Knight stutter. It doesn't make sense because TS spikes at 100% percent CPU usage all the time and 2012 is 50% percent.

So should I just go to the LG website and manually download the firmware update? Or will that damage my drive?

Compaq Presario Intel Celeron D 3.46GHz
Windows Vista Basic SP2
2GB Ram
120GB Hard Drive
Nvidia BFG GeForce 9500 GT 1GB PCI-E 2.0 Driver, 197.45
BFG 450 Watt Power Supply
Samsung p2250 Monitor digital driver
16X BD-ROM LG Ultra BLue
Alhena 5 Motherboard
 

A:How do you know if a firmware update actually installed properly?

Nero Info Tool should tell you the drive's firmware: http://www.nero.com/enu/support-nero8-tools-utilities.html
You can also run that same firmware update utility and I think it tells you if the firmware versions and if there's a newer version.

You can try the WinDVD trial: http://www.corel.com/servlet/Satellite/ca/en/Product/1189528458632#versionTabview=tab1&tabview=tab4

You have a weak CPU and that may be the problem.
 

3 more replies
Answer Match 49.98%

Touch pad is not working also the update firmware v1.17 keeps on failing. Please help. Btw, I'm using Aspire E 14 E5-473-304W.

More replies
Answer Match 49.98%

i was trying to update my SONY DVD Drive fireware yesterday,
but it failed, i mean can't complete process.

After i reboot, theres no Drive display in MY COMPUTER &SYSYTEM Properties(Device Manager) and the DVD Drive's power bottom is not working too(can't eject/close)
CAN ANY ONE TELL ME HOW TO FIX???????????
THANKS

My DVD Drive
Sony DDU-1621 DVD-ROM 16X/48X
 

A:DVD DRIVE Firmware update Fail???

7 more replies
Answer Match 49.98%

Hello,  I am interested in updating the firmware and bios to my LSI SAS1068 integrated on my xw8600.  I would like it to remain bootable and be used in a RAID 0 configuration.  Can you provide me with any insight as to which firmware files to use and where I could acquire them...  Also what is the original LSI name for this controller.  Thanks in advance for any info you can provide.  Best regards, Johny4.51

More replies
Answer Match 49.98%

Hi, Need help where to download the latest firmware update for CD/DVD burner for my lenovo G470? Everytime i burn with my DVD a message box always pops up saying "The disc wasn't burn successfully. Make sure that you have the latest firmware for your CD or DVD burner installed, an then try again." Thanks,Jeff 

More replies
Answer Match 49.98%

I took a firmware update downloaded from Windows Update. The machine shutdown and began flashing the bios. It then restarted and now does not boot at all. It does not even get to the BIOS. It simply restarts and goes to a black screen with no messages or failures. Is there  a way to flash the BIOS and/or Firmware from a USB key or DVD? Regards,J.M. Wiley

A:C40-05 Firmware Update Failed and Machine won't bo...

Welcome to the Lenovo Community !
 
Sorry to hear of the problem you are having.  Are you sure you got a BIOS Update from Windows Update?  If you did, that is a scary thought.  Windows 10 is good for giving you OS and driver updates whether you want them or not. Giving a BIOS Update is kind of over stepping their bounds IMHO.
 
Have you tried this.....
1. Unplug the charger / adapter. 2. Press and hold the Power Button for 15 seconds. 3. Plug in and power up the system to see if the problem was resolved.
 
If that didn't correct the problem, can you access the BIOS Setup by repeatedly tapping the F1 key when you first power up the computer.  If you can access the BIOS Setup then your problem is most likely an operating system problem with a driver update Microsoft gave you. 

1 more replies
Answer Match 49.98%

I have an ADATA S510 120gig SSD, i tried downloading the Firmware upgrade tool seen on this page

S510 SATA 6Gb/s Solid State Drive, Download, S510, 500 Series, Solid State Drive, Welcome to ADATA

I opened the tool and it didnt find my SSD drive. I then downloaded the file itself to try and manually install it but it is a "VIC" file, i dont even know how to open it.

Does anyone have experience with updating their firmware on these SSD drives? What am i doing wrong?
edit: after digging around on my machine i found that i have firmware 3.3.2 which is apparently the latest firmware out there right now (i didnt know that till i just found this info out, this machine is 2 weeks old)

A:Can't update firmware on ADATA S510 SSD

I started my PC with a Linux live DVD (Knoppix) because my ADATA S510 SSD Device is my boot device and device with OS (W7).
So I run the Linux version of the updater (you must be root!) and all worked fine!
But: please check the signature (for example 22739) - it has to be in the filename of the firmware update!
Good luck

PS: my drive was not 3.3.2....now it is! I hope my problems (bluescreen) are gone now!

2 more replies
Answer Match 49.98%

I have an E420 Thinkpad; NO problems ever with the laptop...a great machine.  I ran some updates and the Lenovo update wanted to update the battery firmware; there have never been any problems with my battery (I have an extended battery), but wanted to update as recommended. - When I ran the update, I got a "the tool was unable to update the battery firmware due to an internal error"...and then it automatically rebooted. - Once it rebooted, I now get a DOS warning (on initial boot) "this system does not support batteries that are not genuine Lenovo....." and I have to hit escape to continue.- When it boots up, I get a battery icon that shows either "plugged in and charging" with a RED X imbedded in the icon.- The laptop does not recognize the battery.  Even though it was in good condition and had a 95% charge when I first ran the firmware update....the laptop will not operate without hte power plug attached.- When I go to the power manager and the battery tab, I get a "battery was completely discharged and needs to be recharged verbiage- I have tried to re-run the firmware update from the update tool, but to no success. - I have tried to run the firmware update by downloading the install .exe file and running from my desktop....to no success.- I have tried to do a system restore, but it did not work.- I have screen shots of the screens mentioned as needed. Help!  I now have a small desktop that has a closeable lid.  It will not run if t... Read more

A:Battery Firmware update - failed and now will not ...

I have the same issue.Waiting for the software update or workaround

1 more replies
Answer Match 49.98%

Hi,

I've noticed a slow down in my Plextor PX-708A and thought that installing the latest firmware would a good idea.

The firmwares listed on the plextor site only listed for:

* PX-712A/SA/UF

* PX-708A2/UF2

* PX-708A/UF

* PX-504A/UF

http://www.plextor.be/technicalservices/downloads/firmw_dvdrec.asp?choice=DVD-Recorders

As far as i am aware my drive is just a Plextor PX-708A drive.
What are the 708A/UF 708A/UF2 drives??? How do i know if my drive is one of these?

Matt.
 

A:Need to update firmware? Plextor PX-708A2/UF2??

Looking at this site:

http://www.plextor.be/products/dvd_recorders/px-708a.asp?choice=PX-708A

You'll find that the "A" model is the IDE internal drive, and the UF & UF2 models are external USB/Firewire drives.

However, following the link from PX-708A to firmware upgrades did not show a download for the "A" model, only for the others.
 

2 more replies
Answer Match 49.98%

I tried to update my dvd rw, but this is what I get.
 

A:Unable to install the firmware update

Make sure that all other ATAPI devices are disconnected, if possible. If the drive is no longer under warranty, try the PS0B stock flash from CodeGuys. Using this patched version may invalidate any warranty.

But, what is the reason for the upgrade? They just as often as not lead to problems.
 

2 more replies
Answer Match 49.98%

Last night I went ahead and took the plunge ... Updated the Firmware on my Archos 70 Internet Tablet 250GB (2.1.3 - Android 2.2.1).

My tablet still worked after the update. Slower than before though.

This morning I found out that I can't get online!

None of my four radio apps work (they all worked fine before).

Bible.is no longer works.

All three of my browsers no longer work.

Firmware Update doesn't work (can't connect to the Internet).

Wi-Fi shows that my Archos is connected to my Internet service. My son and I are both online with our computers, so there is nothing wrong with our Internet connection.

Looks like I have no choice now, but to reformat the Archos and start all over again (for the 4th time!!!!) .... That will be very time consuming, as I will have to download all of my many apps all over again, and then reload all of my files all over again ....
 

A:Android Firmware Update Problems ...

If your wireless network is encrypted, have you tried resetting the WPA key?

Just curious.
 

2 more replies
Answer Match 49.98%

I downloaded the firmware update for my CD/DVD writer. Burned it to a CD per the instructions and restarted the PC with the CD in. The PC restarts, reads the CD and then... nothing. No on-screen instructions, nothing.

The CD/DVD drive is bootable per the bios.

Any idea how to make this work?
 

A:Solved: CD writer firmware will not update

8 more replies
Answer Match 49.98%

Hi - I was able to solve connect issues by updating firmware on my wireless router - wifi weirdness

But now my printer is not available (to this or any other laptop/macbook on the network.

How do I install/re-install my brother 9840CDW to my little network here?

Help! I need it! Thanks

A:(Re-) Installing a printer after firmware update

Have you disabled your network then re-enabled it & Also reset your router ??

8 more replies
Answer Match 49.98%

When I plugged my external hard drive into my laptop recently, I received a request to repair certain damaged files. Thinking that the fixes would be rather minor, I agreed with the operation, however it completely deleted a folder with my study materials. Is there a way to retrieve this folder that had been deleted. The folder itself seems to be turned into a 0 byte sized folder.

More replies
Answer Match 49.98%

I've been having the same problem as big0 
 Windows 7 update was canceled boots to repair screen can't repair
And in your post try a windows repair from windows disk i go to part b  step 6b but  System Recovery Options does not find Windows 7 operating system What do i do now 
 
Moderator Edit: Split from another topic to prevent confusion
Roger

A:Windows 7 update was canceled boots to repair screen can't repair Too

Hi, Is this the same computer as here?
http://www.bleepingcomputer.com/forums/t/524720/startup-repair-loop/
 
Thank You
Roger

3 more replies
Answer Match 49.98%

windows update was canceled (purposely by teen) and now computer starts in repair mode.  We selected repair and message says could not be repaired and shuts down.  In recovery tools - tried to load to last known working version and no restore point is available.  Disks did not come with this computer (Dell Inspiron 1545).  Any help would be appreciated.

A:Windows 7 update was canceled boots to repair screen can't repair

You could try going into safe mode, hit F8 during boot up.  Not real sure but I would then go to windows update, it may see the bad load.  It is worth a try!
 
Phil

48 more replies
Answer Match 49.56%

I've got a Razer deathadder and i'm trying to update the firmware to 1.27.
Everytime i try to run the firmware updater it just crashes.
I've tried it in XP, Vista and Windows 7 and no luck in any of them.

Any ideas?

More replies
Answer Match 49.56%

I seem to be in a loop while upgrading from a Pentium G840 to an i3770 K on an Intel DH61WW motherboard.
It seems that I need version 8.x of Intel Management Firmware and I can't get to update past version 7.1.52.1176
According to this page, I need version 8.x to continue for updates to use Windows 8 & 8.1

So far, I have had the bios version update to
BEH 6110H.86A.0048.2012.1105.1520
I had the i7 installed but it acted confused. So I reinstalled the Pentium and still nothing works as far as updating the Intel Management Firmware .
According to this page I am ready for 3rd Gen i7 but not unless Intel Management Firmware gets updated first

Board


DH61WW

3rd Gen-Ready AA#s

AAG23116-206
or later
3rd Gen-Capable AA#s

AAG23116-204
3rd Gen-Transition BIOS version

BEH6110H.86A.0035
3rd Gen-Ready BIOS version

BEH6110H.86A.0041 or later

 

A:Intel Management Firmware Update help needed

Did a BIO Recovery, updated to BIOS 0099 then BIOS 0120

1 more replies
Answer Match 49.56%

Hello users,
my E63 has a firmware update available which is 501.21.001
My problem is that, the available storage on my phone is about 93MB and the update size is 114MB, can I still update the phone without a problem? I am looking at the firmware size difference with my phone. Will it work?
 

More replies
Answer Match 49.56%

Hi. I ran the Samsung 840 EVO Firmware update that was provided because of the degrading problem said to be with the product.

It went all the way through and said complete. There were no problems or interruptions there. I closed the application and rebooted my machine.

The computer will get to the windows screen but right when it is supposed to go to the login it goes black and the monitors stop detecting a signal. It just sits at a black screen.

The scary thing is that when i try to run a recovery all executables associated with a given recovery error out. I.E. StartRep.exe fails to run. Trying to load previous working fails to run to. They get memory exception type errors!

I put in the windows 7 disc and have had it come up with "hit key to boot from cd or dvd". all repair attempts are the same as above. They fail the same way.

The only thing I have not figured out is how to get the machine to load into safe mode. i have been hitting F8 and doing what I can but I get no such options. My options are only the repair dialogs or boot normally. I do not understand why this machine has never given me a choice to boot to safe mode. How can I get that to work?

Please help! Is there anything I can do? I can't find any samsung forums or info.

Windows 7 64 Ultimate.
Asus X99 Deluxe.
Intel 5960X 3.0 x 8 core
G.Skill Ripjaws 4 Series 4 x 8gb (32gb) DDR4 2400
Samsung 840 Evo 500gb SSD
Corsair RM1000 1000wPSU
Corsair H100i
Nvidia 780GTX

A:Samsung Evo 840 Firmware update - Now windows won't boot.

What degrading problem ? Samsungs are the best IMO, what did you think upgrading the firmware would help ? Or what did Samsung say it was for ?

How old is the drive, how often is it used ?

9 more replies
Answer Match 49.56%

I tried installing the following from the dell website “Firmware Flash for HLDS GCE-8400B HH 40X CDRW Version A02”
The download created a bootable floppy. When I tried to install, the installation went to about 75% then froze. After re-starting the computer, I get the following black screen:

Secondary hard disc drive 0 not found
Secondary hard disc drive 1 not found
F1 to continue
F2 setup

F1 boots the computer, slowly, and after booting, the cdrw is not recognized at all in my computer

All other discs and drives are recognized

Any suggestions on how to correct the problem?
 

A:CDRW not recognized after firmware flash update

7 more replies
Answer Match 49.56%

So I installed my new SSD, set up all my programs and files, and was having some trouble with discovering an ACHI drivers (which apparently cannot be achieved on my dell latitude model IDE ATA/ATAPI driver missing?)

Anyway after installing the Samsung Magician software to help optimize the SSD, it said that a firmware update was available, so upon updating I was rewarded with a BSOD after restarting. I became angry and did a system restore with my image disk and started over. This time in the samsung magician it said the firmware was already up to date so I didn;t think anything of it until today another BSOD. If I have to do another reinstall I will take my own life, so I hope someone can help me here.


Attachment 311734

A:BSOD After Samsung magician (840 pro SSD) Firmware update

Do you use the DW1520 Wireless-N WLAN Half-mini card?
If so then it looks like the driver for it is the problem.

Do you have a spare HDD that you can use because I think the driver for it is incompatible with SSDs. I will need to double check.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {10, 2, 0, fffff80002ea4ec9}

Probably caused by : tcpip.sys ( tcpip!IppValidatePaths+71 )

Code:
fffff880`04a8f000 fffff880`04f12000 bcmwl664 (deferred)
Image path: \SystemRoot\system32\DRIVERS\bcmwl664.sys
Image name: bcmwl664.sys
Timestamp: Fri Jan 07 08:05:56 2011 (4D26C964)
CheckSum: 0048C1C3
ImageSize: 00483000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
It doesn't mention compatibility with SSDs. I will keep looking. Here's the website anyway.

Driver Details | Dell US

2 more replies
Answer Match 49.56%

I tried to install a battery  update on my Lenovo T520.  The update fails with an "internal error" message being reported.  The battery does not fully charge and now lasts only a few minutes once the charger is unplugged.  The battery is a Lenovo replacement less then a year old.

More replies
Answer Match 49.56%

My notebook is one of the first to come out of the assembly line and came with firmware 1.02.There's 1.08 BIOS that came out, so I tried to update it from Windows 7.  It took a long time, but it completed and the tool said to reboot.  That's all it said as far as I remember. Upon reboot, it started to give beep code.  I don't remember which it was, but it was something like 1-long 2-short or 2-long 2-short.  It kept at it for a while and I got tired of it, so I pressed and held the power button to kill it and then restarted it. This time, it got into BIOS, which said it was updating USB Type-C Controller Firmware from v12 to v13.  This FAILED and gave me the option to "reboot and try again."  I picked that, but it never retried. I didn't feel comfortable with this, so I flashed 1.08 BIOS again, this time from within the BIOS using a USB-stick (\Hewlett-Packard\BIOS\New\N73_0108.bin).  It went through much quicker than in Windows and at the end, it actually warned me that the machine may beep for a while after reboot.  Umm, thanks for the warning, now that it's too late.  Why didn't Windows update program give me the same helpful warning? Anyway, the machine rebooted, but it did nothing to try to update USB Type-C Controller Firmware.  I'm guessing it set a flag somewhere saying we're already at 1.08 so there's nothing new to do. When BIOS configuration is dumped using BiosConfigUtility.exe, it shows US... Read more

A:Failed USB Type-C Controller Firmware Update

The 1.11 BIOS update posted 31 March 2016 corrects this issue.http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7815285&swItemId=ob_163435_1&swEnvOid=4192#tab4 

4 more replies
Answer Match 49.56%

We've recently installed a Level One FBR-1461 modem/router on a network with a fixed IP address. We need remote administration but that's not available with the early firmware version installed. A firmware update (via zip/afw file) was sent by Level One tech support in Germany, but not accepted by the router.

File is:

LevelOne-FBR-1461A-V1.35-RC24-180-80.3_sso_levelone.afw (about 3.5Mb)

I've tried shortening the file name to (perhaps) a more acceptable length, but the router will not accept the upgrade.

Has anyone else had problems or found a solution?
 

A:Level One Router Firmware update problems

I'd contact LevelOne first, I suspect they can figure it out pretty quickly.
 

3 more replies
Answer Match 49.56%

I am trying to update the firmware on my Panasonic Lumix L10 digital camera body. I downloaded the file which they say is self extracting. I haven't been able to figure out how exactly to open this down load correctly. I was able to get this into a zip file and when I went extract I got this message : can not open 'c:\users\john\documents\L10 update|L10_210.bin as archive. I may be approaching this simple task the incorrect way. Can you steer me the way?
http://panasonic.jp/support/global/cs/dsc/download/fts/index.html#step1
 

A:Solved: Panasonic Lumix firmware update

You're misreading the instructions: http://panasonic.jp/support/global/cs/dsc/download/fts/index2.html

The Windows file is an .EXE file, you just run it and it extracts the file for you. The .ZIP file is for Mac, which you do not appear to have based on the path you posted above, although you can use that if you want as the firmware is the same and Windows supports ZIP files. So that L10_210.BIN file you have unknowingly extracted from the downloaded file is the one you want. You do not need to attempt to further extract the .BIN file which appears to be what you are trying to do. Take that BIN file and copy it to the SD card as described in step 1-4
 

2 more replies
Answer Match 49.56%

Hello! I have looking for newer firmware in this forum and i have not find anything...I have x200 25d model with this model of burner but i can?t truncate any dvd dl with imgburn software. the same model in acer laptop witn 1.61 firmware can truncate the dvd dl.

Is there any firmware update for my model? Thanks a lot!!

A:Satellite X200-25D: looking for Mat****a uj850s firmware 1.90 update

Hi

Found some firmware updates for this notebook model on the Toshiba European driver page but the firmware updates are released for TS-L632 or TS-L632P ODD drives.

Mat****a uj850s firmware update does not seem to be available.

1 more replies
Answer Match 49.56%

I would like to turn on the wireless capability on my Actiontec GT701-WG, but the firmware is old and the tutorial on CenturyLink's website looks nothing like the set-up page I get. I'm nervous about updating the firmware - I'm not very tech savvy. Does anyone have any suggestions or tips? Or should I just order a new, up-to-date modem?

Thank you!

Melanie
 

A:Solved: Update Actiontec GT701-WG firmware?

6 more replies
Answer Match 49.56%

Hello Today y made a BIOS Update in windows 7 (64) from 3.06 to 3.90.The Update Process freeze at end  and only Power Cycle possible (Waited 15min.) Now when power Up only noise from Fan and Black Screen.CD rom blink  (like he search somthing) Called HP Support... and what Surprise... Support ended 1 month before... I asked for Help in Bios Crisis Recovery procedure...And the nice woman told me that only can buy a New Motherboard. Can anybody Help Me Please ? Is there really no recovery procedure ? Please ? 

A:Z820 Bricked Bios after Firmware update

Hi: If you run the BIOS file again (on another PC), the intruction page opens and you can try this...I'd burn the DOS based flash files on a CD, since the DVD drive may be looking for a CD to recover from, but according to the instructions below, you can use a USB flash drive (formatted in the FTA 32 files system, not NTFS). Just put the files inside the folder on the CD, not the folder. Fail-safe BootBlock Recovery ModeHP Workstations include 64 KB of write-protected boot block ROM that provides a way to recover from a failed update of the system BIOS ROM, for instance in the event of a power loss.  Fail-safe BootBlock Recovery Mode will detect that the BIOS is unusable and boot the workstation in a recovery mode and search the root folder of any FAT/FAT32 file system on any USB media source (hard drive, flash drive, etc.) for a compatible binary image. The binary (.bin) file in the DOS Flash folder should be copied to the root of the desired storage device, and the system powered on. Once the binary image is located, the BIOS recovery process will be attempted. The automatic recovery will continue until the BIOS is successfully updated or restored.    

1 more replies