Tech Problem Aggregator

Preserving date and time stamp on all files copied?

Q: Preserving date and time stamp on all files copied?

Hello,

I have a new computer with Windows 7 on it - and I want to copy the files from my old computer to my new one. I'm looking at copying about 300 GB worth of data.

When I copy all files and insert them onto my new desktop, I notice that all of the date/time stamps are changed to today's date.

Is there a way to preserve the date/time stamp for each file, so that it keeps the original one?

Thanks!

A: Preserving date and time stamp on all files copied?

If you right click the folder, then select properties It should show:

Created: (This will be the date you copied it over)

Modified ( aslong as it hasn't been modified on the new machine, IT should read the date it WAS last modified?

Accessed: It should show when the folder was last accessed (opened)

In regards to "perserving the date/Time Stamp. I'm not sure this is possible.
You can always try checking the Modified Time/date ( mentioned above ) then add the date to the file/folder name. SO you always have a refferance.

3 more replies
Answer Match 103.74%

Using VISTA, why is the time and sometimes the date incorrect on the temp file log. How do you fix it? the laptop clock is correct, the comuter is dell vista laptop, ...whne I did a file recovery I noticed that many files were "accessed" on a hour time delay, say I was on internet at 9pm, it lists it as 12am. I checked many other days and this problem was everywhere. why and how to fix. thanks

A:fix time date stamp on temp files

What/ where is the "temp log file"?

Are you sure that you are looking at "last access" date vs. modified, or other dates?

Please post that log.

jcgriff2

.

2 more replies
Answer Match 90.72%

Has anybody else experienced this problem?

I open Event Viewer - "Admin View" to see what Errors/Warnings are there and in the column - Date and Time only the date is showing. Same goes for all the other views.
The "Time" element seems to have completely disappeared.

Any idea where its gone........... and more importantly, how to get it back?

Thanks

A:Time stamp missing from Date and Time column - Event Viewer

Problem solved - but - I don't know why.

Solution:- I changed the Date/Time format from UK to US, opened Event Viewer and it was as it should be. Date & Time showing.
I then changed format back to UK, opened Event Viewer and , as above, the Time was back up.

If anybody knows what had happened I would be most interested.

My thanks to Bill............. from another site for helping me out with this one.

1 more replies
Answer Match 89.46%

When I take a picture with my Android phone, the date and time when the picture was taken is recorded, in the filename as well as in the JPG picture-file itself; all very convenient. To my horror I noticed that my phone reacts in an idiotic way to the GSM connection being lost: the date of the picture is 'reset' to, apparently, the date the device was manufactured. Subsequent pictures apparently start counting from there. This completely messes up the chronology of my pictures: all pics taken with no GSM connection end up with date/times on the same day, years ago.
I completely fail to understand why this is so and would like to know if this behaviour is particular to my device or if others experienced the same thing. Is it a bug or a feature?
I experimented with various methods to set the time: manual, from GSM-network or from GPS. I would have thought that using manual or GPS would remedy things, but it didn't. (Although it had some effect on Daylight Saving Time issues, but that's another story.)
 

More replies
Answer Match 89.46%

I have photoshop Elements 1. How can I get the date and time stamped on the photos that I want to print. I know that running the curser over the picture, they show up but I want it on my prints. Is there a way to automaticly do this other than using the text tool.
 

A:Date & Time Stamp

15 more replies
Answer Match 88.62%

Anybody else noticed that after the summer-time change, Win XP has changed the TIME STAMP on all files. I think this only happens on NTFS partitions, but the effect is that all backups held on non-NTFS partitions now appear to be an hour old. This is just STUPID, and can anybody tell me if this is intended, and if so what conceivable reason can there be?

better yet, can we do anything?
 

More replies
Answer Match 88.62%

i found some disturbing searches in my google toolbar and i need to know if there is a way to find a date and timestamp for these searches. i'm worried that my children are visiting improper sites when i am not around. any help would be greatly appreciated!!!
 

A:date and time stamp for a search

I am not sure about a search time stamp... but if you check the history of the browser, you'll prolly find the websites they visited.

While ur browser window is active... prest Ctrl + H
Then sites that have been visited will show up at the left side of the browser (this all depends on your browser settings)

hope that helps!
 

1 more replies
Answer Match 87.78%

I am searching for a little freeware utility that will let me insert the date and time into an MS Word, Wordpad, or Notepad document. Does anyone know of a utility like this? Thank you in advance for any reply.
 

A:Need freeware date and time stamp for Word

You don't need any additional software for this.

For Word and Wordpad:
Just select Insert Date and Time. Then select the format you want to use

For Notepad press F5
 

3 more replies
Answer Match 87.78%

Hi there,

Thank you in advance for checking out my query.

I rarely have the opportunity to use VBA so I apologise for my ignorance in advance

In the attached file I am trying to setup a few things ... tried several different codes from other sources, but weren't successful ... so I deleted the codes to avoid confusion (I am already massively confused.. I have been at this for the last 6 days and nights ... and I'm getting stressed out!).

Since there are a few things that I would like my form to do, I realise that if anyone is going to help me out, I will need to just ask for the most urgent items that are essential and have to wait with the other fixes.

There are 4 main fixes that I'd be immensely grateful for are;
The User enters a 4 digit code into a textbox named txt_SAC_No when that has been entered I need the textbox txt_SAC_Address to perform a Vlookup a named range (SiteNameADDRESS) and display the data in the textbox.
The reason for the result to be displayed in the textbox is because some codes are not listed and users will need to enter in the information manually.
I do not want the information that the user manually enters to be added to the named range.
If it is possible to have the next available Security Incident # (which is setup in Column A on the Incident Details spread sheet) when the user opens this form
Setup a Date and separate Time stamp to activate after the user has entered their name into the lbl_INC_Recorded_By textbox -... Read more

A:How to do a Vlookup in Userform, Date & Time Stamp

OK... it was all about size

I have taken all the unnecessary stuff out of the file ... so there is only the bare minimum in there... which should not affect the form or fields etc.

Small win for me today

Please let me know if you need any further clarification or information
Thank you again

Shybutterfly
 

1 more replies
Answer Match 87.78%

Hi,

I have a situation where a new user has managed to set all 2000+ emails in their bosses inbox (in Outlook 2003) to Read - the boss is not happy. I have explained until I'm blue in the face that there 'may' be better ways to organise their emails...

Does Outlook record a time / date stamp for WHEN an email was marked as read / unread, and is it possible to filter by this so we can effectively select & set all emails not Read before a certain date back to UNREAD.

And save a trainees job.

OldRedEyes
 

A:Date/Time stamp for Read in outlook

nothing? anyone?
 

1 more replies
Answer Match 87.78%

I'm using XP outlook express and I noticed the other day my incoming emails don't have a date or time under the receive column. Someone please tell me why or how to fix. Thanks.
 

A:No date & time stamp in Outlook express

bump
 

1 more replies
Answer Match 86.52%

I have a program that runs on a XP platform on several computers.
There is one computer that has a weird problem.

The program shows the time and date of the computer, which is the actual time and date.
The program can create bitmap images and text images.
When I click on the export button, the program will save the BMP and TXT files to the Harddrive with a total different date/time stamp.
The program wil export the BMP and TXT files with not only a filename, but also a date/time stamp (the correct one).
It will be exactly one hour and one day earlier.

This is not correct, because the computer has the current date and time, but Windows labels the files with a wrong date/time stamp.

If I open Windows Explorer, I can see the files listed as:

filename200908201250.BMP Bitmap Image 12KB No 302KB 97% 8/19/2009 11:50 PM

It will not impact the problem if I change the BIOS and Windows time.

Did anyone have this effect ever before and can it be a virus ?
The problem is, once in a while, I will loose BMPs and I cannot find them anymore.
 

A:Time/Date Stamp in XP shows 1 day and 1 hour difference

The problem is not the time difference itself.
The big question is, how is it possible that the program takes the time from Windows, displays it correctly in the program, saves the files with the correct time and date, but shows in Windows Epxlorer to be created on a total different moment ?
The exact same program is installed on many more computers and they don't have this problem.
I have replaced the program, Windows, HDD and the computer motherboard without success.
Could it be a virus causing this ?
 

1 more replies
Answer Match 86.52%

When I create a file in Windows 7 and save it I get the current date and time stamp but when I edit the program at a later time and date and save again it doesn't change the date and time stamp it stays the same as the original file! I feel like a moron but how can I change this?

A:Change date and time stamp on file save...

Hi Dave,

Presuming you have made changes to the file that require saving, the date and time should indeed change. See the image below : do you have the Date Modified, or Date Created option showing?

3 more replies
Answer Match 86.52%

Hello,

I have a JVC Everio GZ-HD10U camcorder that I am recording videos to MicroSD card. Upon transfering the video on my computer via sd card, I am unable to make the date/time stamp show up on the video. I have attempted using Windows Live Movie Make and Pinnacle software (Avid Studio) and have had no luck.

I am running Windows 7 64 bit with 4gb of memory. Has anybody figured out how to get the date/time stamp to show up on the computer?

Thanks in advance for your assistance.
 

A:Solved: Date/Time Stamp from Camcorder to Computer

7 more replies
Answer Match 86.52%

I never seem to know where to place the IFs. I yoinked the 2nd part of this code from somewhere, then added it to my existing code. It doesn't work, of course.

Code:
Option Explicit

Private Sub Workbook_Open()
'When workbook is open, if the date is blank, enter it
If Range("qadate").Value = "" Then Range("qadate").Value = Date + Time

'If the workbook is the "template", do nothing
If ActiveWorkbook.Name = "QA-Hosp" Then

Exit Sub

'If the workbook is NOT the template anymore, username & time/date stamp it

' Stores who and when on Record Sheet, column A
Sheets("Record").Select

If Range("A65536").End(xlUp).Row = 1 And Range("A65536").End(xlUp).Value = "" Then
Range("A65536").End(xlUp).Value = Environ("Username") & " " & Now
Exit Sub
End If

Range("A65536").End(xlUp).Offset(1, 0).Value = Environ("Username") & " " & Now
End If
End Sub

I very much appreciate any help!
 

A:Solved: Workbook_Open Username & Time/Date Stamp

Looks like you need to move the End If to the line after the Exit Sub. Otherwise it is effectively exiting before running any further code in any case.

I would also consider changing your code so you are not selecting the Records sheet:
Sheets("Record").select
I would declare Records sheet as a variable instead:
Dim Record as worksheet
set Record = sheets("Record")
You can then change these references:
Range("A65536")

for
Record.[a65636]
 

3 more replies
Answer Match 86.52%

Having a problem transferring the date and time stamp from Cannon ZR90 to DVD. Video and sound transfer perfect. I turn on the data code on the camera, still no transfer. I have tried several software programs such a ULEAD, Pinnacle and others. My computer is a Dell Inspiron 8100 and I am using a Firewire. Help.
 

A:Solved: Date and Time Stamp from Cannon zr90 to DVD

8 more replies
Answer Match 86.52%

I've got the date/time stamp ON in the menu, but a date/time stamp does not appear for a video recorded. Is it only for pictures? I have the extended user guide, but it hasn't helped.

Thanks.
 

More replies
Answer Match 86.52%

Ok, here is what I have.

An Access Database that will allow for "Trouble Tickets" to be issued.

The way I have it set up now is a Status. This tells if the Ticket is Open or Resolved.

What I also have is a "Closed Date" Field, what I am trying to do is set it up so that if the Status is changed to Resolved, it will put the "=NOW()" in the Closed Date field.

Any suggestions. Everything seems to work fine, with the exception of this.

Thanx in advance.
 

A:Solved: Access - Closed Date/Time Stamp

13 more replies
Answer Match 86.52%

platform: skype, desktop program, not the win8 metro app

ok..buddy of mine, her skype for some reason seems to think its december 8th of all things, we've confirmed the computer's date/time settings are correct...any ideas? I'm quite confused here.

A:skype displaying incorrect date/time stamp

I don't use skype (desktop or metro) but it appears this thread addresses how to change the date/time in a Windows desktop client environment:

date time set - Skype Community

2 more replies
Answer Match 85.68%

HELP!! Does anyone know HOW to customzie the Date and Time stamp on emails in Outlook 2010? I want each and every single email to show up in my Inbox (whether read or un-read/new) as the DATE, i.e. 6/19/2012 9:24am I do NOT want the words "Today" or "Yesterday" or "Tues" - AND - I want the entire DATE to appear and the TIME to appear on every message. I find and sort emails by time and date. I used to have that as a default in Outlook 2003. How do I change the default in 2010 to be what I want?

 

A:HELP!!! OUTLOOK 2010 - Date&Time stamp on emails - can I customize?

9 more replies
Answer Match 85.68%

Hello!

I joined this forum for just this one problem...

My line of work requires that I take before and after photos of everything I do or photos to support the bidding of work to be done. The resolution is required to be 640x480 and the compression set to normal. Most of the time I am taking 100+ photos per job site. Sometimes completing 3-4 job sites per day. Past cameras I have used (Nikon CoolPix) allow the Date/Time Stamp to be a part of the image which is also required by my line of work.

I have been frustratingly searching for the instructions on how to get the Date/Time Stamp to be a part of the image when it is taken for the Olympus Stylus Tough 8000.

I understand that this information is recorded with the image and that I could use a program of some sort to add the Date/Time Stamp myself but due to the volume of images a software solution would no be viable.

Is there anyone that has used or can help find the instructions for enabling a Date/Time Stamp for this particular camera?

Any help is greatly appreciated!

Thank You.
 

A:Olympus Stylus Tough 8000 Date/Time Stamp

8 more replies
Answer Match 85.68%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Home Basic, Service Pack 2, 32 bit
Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3002 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1308 Mb
Hard Drives: C: Total - 152624 MB, Free - 101762 MB;
Motherboard: Wistron, 3612
Antivirus: Symantec Endpoint Protection, Updated and Enabled

I had my laptop hard drive replaced and part of the agreement included the installation of MS Office Professional. When I went to pick-up the laptop I asked for the MS Office product Key Codes for my records and registration. The store owner said he had already registered the software and it was set to go, just bring it back if I ever needed to reinstall for any reason. I was suspicious as a legal installation would include this information.

When I got the laptop home and started it up, I checked to see the licensing information on MS Office Professional and it was registered to IUWare (University of Indiana), I have reported this to their ITC Support and other security and policy departments. Long story short I am in process of filing a FBI claim against this vendor and a VISA dispute as well. I want to know how I can access the time/date stamp on the initial installation of MS Office Professional on my hard drive and all changes made since that initial installation. The first night I had run time errrors and took the lap... Read more

A:Root Record of Software time/date stamp of installation/changes

If you go Control Panel > Progarms and Features, you can see the date of installation of all software. If the date column isn't showing, right click on the column headers and checkmark "Installed On'.
 

2 more replies
Answer Match 85.68%

This just started.

If I create a new folder in Outlook and move emails there, the date/time stamp of these emails change to the date/time I created the folder.

Doesn't happen when I move them to existing folders though, only new folders.

To see if it's specific to my Outlook, I connected to another on a terminal session and the same problem occurs.

Help!!!
 

More replies
Answer Match 84.84%

I have the following macro below which works great for when any value is entered in Column C, it time/date stamps the adjacent cell in Column D. However, I need it to do the same thing a few columns over (ie, when any value is entered in Column H, it will time/date stamp the adjacent cell in Column J)

For the life of me, and cannot get it to repeat . Any ideas? I'm a bit new at this, but thanks in advance for the help. Feel free to spell it out - I won't be offended.

Thanks! Here's the current macro:

Private Sub Worksheet_Change(ByVal Target As Excel.Range)
With Target
If .Count > 1 Then Exit Sub
If Not Intersect(Range("C3:C9999"), .Cells) Is Nothing Then
Application.EnableEvents = False
If IsEmpty(.Value) Then
.Offset(0, 1).ClearContents
Else
With .Offset(0, 1)
.NumberFormat = "dd mmm yyyy hh:mm:ss"
.Value = Now
End With
End If
Application.EnableEvents = True
End If
End With
End Sub

 

A:Solved: Excel Macro - Repeat Time/Date Stamp for Different Column?

6 more replies
Answer Match 84.84%

I apologize for posting to the "general" forum here - even though my issue concerns gmail, it may have something to do with file handling in Windows 7, so I'm shooting for the broader audience in this forum.

How do I save an attached file from my gmail account, such that the date and time stamp, once saved to my local computer, remains the same as that of the original file?

That's how I just always assumed it was being done, and yet with gmail, the files are saved to my local computer with their save date/time, not the date/time of the actual file.

This is just wrong! If I send a file to 15 people, I want each recipient to have a saved file with the same date/time - not 15 different times based on when they saved them.

What am I missing, to force gmail/Windows to preserve the original file date and time stamp?

BTW, I posted this question to a gmail user forum, and the only answer I got so far is unhelpful, and likely wrong, gobbledygook.

A:Saving gmail file attachments without changing their date/time stamp?

Hi,
I doubt that can happen
At best there might be a universal Date Created or Date Taken on all of the files.
The camera it's self would enter that info "if" the time and date were correctly set on the device.

3 more replies
Answer Match 83.16%

Here is a weird one.
 
I have Photoshop CS 5 running in win 7.
 
When I save jpgs to a particular folder itn saves the wrong date stamp in 2013 with exact same time and date.
If i save outside this folder it saves out with correct time stamp.
 
Folder is shared on both Dropbox and GoogleDrive as is the location i saved  a test jpg which gives correct time stamp.
 
Any ideas? Its odd as it only this folder and only jpgs ...
 
I opened the file info and it seems to be reading the 'date taken' not the 'date created' info . 
 
I created an image from scratch and saved it out as a jpg- looks like PS is picking up a photo texture on one of the layers data as its date taken. must be still in the data part of the image. 

A:Date stamp wrong when saving files...

Does this only happen in Photoshop?  

5 more replies
Answer Match 78.54%

I've hit a showstopper in Windows 7 for which I have so far been unable to find a workaround. I maintain my websites by duplicating all updated files in my local public_html directory tree to a new location, and then using FileZilla to upload only those files to the web server. This has always been simple in WinXP :
- use WinZip to archive everything in the directory tree
- open the archive, sort by date, and remove all older files
- select and extract the remaining files to the new location

Unfortunately the new version of WinZip seems to rely on the new "feature" of Windows 7 that copying a file resets its modified date, so this approach is no longer possible. I don't see any way to force it to keep the original modified date of the file in the archive. Things I've tried so far to resolve my problem are :

- RoboCopy
Does not seem to have any way to filter files to be copied by date.

- RichCopy
Looks like it should work, but the GUI selection of include/exclude filters does not work. Everything is copied, regardless of the selection, nor does that selection persist when you save the profile.

- 7-Zip
Can't find any way to hide the directories and show only the files when browsing the archive. Deleting the older files does not remove the no longer used directories. I can't see how to get the files to extract using their internal relative paths -- the dialog box mentioned in the help file does not come up on this machine.

- WinRAR
Can't find any way to sho... Read more

A:Copied files change modified date

  
Quote: Originally Posted by Sherry0


- RoboCopy
Does not seem to have any way to filter files to be copied by date.


Robocopy's MAXAGE switch? To for instance exclude all files over 2 days old:

Code:
robocopy C:\Example\ D:\Example\ /E /MAXAGE:2
Kari

9 more replies
Answer Match 78.12%

I've tried to send a delayed email using the "Do Not Deliver Before" function. Hoping the email would be date/time stamped when I wanted the recipient to receive the email. For example, sent the email on a Tuesday and scheduled the email to be delivered the next day (Wednesday) at 10am. The function did delay sending the email, but the date/time stamp was when I originally hit sent on Tuesday. What is the purpose of this feature if the date/time stamp will not indicate the date/time I wanted the recipient to receive the email?

When using this function, is there a way for the exchange to track the date/time stamp of the email when it actually leaves the Outbox instead of when you click send? I understand the exchange keeps track of the date/time stamp of when an email is sent, but why couldn't the exchange keep track of when the email leaves the outbox when using this function? Is there any exchange setup that will make this function work the way it is supposed to? Thank you
 

More replies
Answer Match 71.82%

Hello all :)

It seems I'm having the same problem as missred in this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232 (on the bottom). Unfortunatelly I can't reply there that's why I'm writing here. My laptop version is 3440CT.

My try was to make a win98 bootable HD drive with i386 directory on it, boot from this disk and start the installation with winnt.exe. OK, it works but while the files are being copied after some time it just freezes. I tried it both with one partition and i386 on active system partition and with two partitions and i386 on a separate non-system partition. I don't have FDD or CD for the laptop.

Any ideas what is wrong? Is it possible to install XP on the same disk the XP installation is started from?

Can't wait for your replies ;)

dzi

PS: My other tries were:
- complete XP installation on another computer and then switching the drive
- XP installation on another computer up to the point it first resets (after finishing of coping the installation files) and then switching the drive
both unsuccessful. I also changed the drive to another one as I suspected it's phisically damaged. Now I'm out of ideas ;)

A:Portege 3440CT freezes after some time while the files are being copied

> OK, it works but while the files are being copied after some time it just freezes. I tried it both with one partition and i386 on active system partition and with two partitions and i386 on a separate non-system partition
For me it sounds more as a HDD or RAM malfunction as a wrong installation procedure.

What do you think?

2 more replies
Answer Match 69.72%

Looking for a utility that will allow me to locate files created/modified/accessed using TIME from/to also...as i want to locate those related to a specific occurance. When using just date, I get hundreds of files so would like to isolate further.

Is anyone aware of any such program? Shareware might be ok depending on cost but free is preferred. THANKS!
 

A:Solved: Freeware to find files by date and TIME? Time is the key!

10 more replies
Answer Match 68.46%

Wasn't their a discussion recently here about digitals that would stamp the date right on the picture? Someone is asking me this and I could have sworn a few models were given that did this but I can't find the post.
 

A:Date stamp on photos

13 more replies
Answer Match 68.46%

How do I date stamp with the Canon EOS 550 D? I can find nothing under all five menu tabs. I can set the date and time but I can't put the date onto recorded images. Thanks in advance.
 

A:Solved: Date stamp

14 more replies
Answer Match 67.62%

Hi,

A family member took many great pictures while on vacation but used the date stamp mode. I noticed in XP the date stamp does not appear on the icon when set to thumbnail view. However, it does appear in Windows 2000 thumbnails. Somehow the JPG holds more than one layer of info, but I've been unable to find them with Paint Shop Pro 7. The camera is a Sony Mavica CD-2000 and the picture format is jpg. I checked the archives and looked on the Net for information but have come up empty handed. Is there a photography expert that knows how to divide the layers, if that's the case?

Thanks,

Dave
 

A:Removing the date stamp from a photo

9 more replies
Answer Match 67.62%

Hello all. I work around Outlook 2000. My question to you all is I have one account out of like 50 that is receiving e-mails late. Ex. Today 1/19/05 I am getting e-mails stamped 1/1/05 about three weeks after they were sent. I looked at the basic, Delay e-mail but it is happening from more then one person. I also thought about the whole time zone thing but I checked the time zone on the computer and it is set up right. And the funny thing is that it is not happening to all e-mails just the impartment ones.

Any ideas, any help

Thank You
 

A:outlook 2000 Date Stamp

16 more replies
Answer Match 67.62%

I understand there is a way to change the " when became a member " on yahoo profiles : i want to look as tho the id i am using is older than the actual date i received it. How can this be done?

A:date stamp, when became a member at yahoo

Where did you hear this??
I seriously doubt that this is feasible. Yahoo (and plenty of websites) add this to be informative, and perhaps to add credibility to a post. Changing this would require hacking the servers...

1 more replies
Answer Match 67.62%

Are there any photo editors that would allow me to enter a date imprint on multiple
pictures(not individually) already in a folder on my computer?
 

A:Photo Editor, Date Stamp

I don't know but look at this thread.

http://forums.techguy.org/digital-photography-imaging/480310-solved-put-date-stamp-original.html
 

2 more replies
Answer Match 66.78%

Hello. Here is my issue short and sweet.

When I use ANY of the web based emails (Yahoo, Gmail, Comcast) on computer A, all of my emails are stamped an hour earlier than real time. By real time, I mean the clock on the computer AND the analog tick-tock clock on my kitchen wall. Both display the correct time accurately.

When I use ANY of the web based emails (Yahoo, Gmail, Comcast) on computer B (or C or D), all of my emails are stamped with real/correct time that matches my kitchen and computer. These computers ALSO reflect correct time.

With either computer, any file created or saved has a date and time stamp that is correct and reflects real time. Whether saved with a web app, a windows app or a cmd line app.

On all computers my time zone is set correctly. The "adjust for DST" box is checked. I also ran TZEDIT to confirm that my DST dates are correct.

One revelation (and I believe herein lies the key). If I look on computer A at the bottom of the "Date and Time Properties box: the current time zone says : Eastern *STANDARD* time. If I look at computers B, C or D. The "Date and Time Properties box says: current time zone: Eastern *DAYLIGHT* time. I can not find any way to change the "STANDARD" to "DAYLIGHT".

Now for the big question. How is this resolved?

Thank you.

PS. As mentioned in other posts, Adjusting the clock on computer A an hour ahead resolves the email issue, but now any file created or modified has the incorrec... Read more

A:Web based email Time zone issue wrong time stamp

Double click your clock, click on "Timezone" tab and tick the box for 'Daylight savings'. If need be adjust your timezone from there.
 

2 more replies
Answer Match 66.78%

Is there a way of finding out when a picture that has been sent to me via an attachment on an email was taken?
TY in advance.
Nick.

More replies
Answer Match 66.78%

Canon 2SIS

I've figured out how to set the date on the camera and can put a Date Stamp on images after I download them to a computer. I have to run the camera software to do that and then the file is changed from JPG to an album. Don't want to do that.

Does anyone have idea how to set the camera to put the Date Stamp on the image taken with the camera?
 

A:Solved: Put Date Stamp On Original Images?

10 more replies
Answer Match 66.78%

I have spoke to someone who is dependent on sending customers' emails. It is vital that the email dates are correct. I think the problem started when the clocks went ahead.I have instructed them to do all updates for outlook 2003. I verified that the problem is not related to their email host. The date stramps are correct when they send out email usijng webmail. Her computer is free of viruses and spyware and is maintained very well. She did a detect and repair as well.She has Mcafee as her antivirus scanner and no firewalls that I know of.I spoke to her email server and they have not any such issues regarding their server.Maybe someone out there has dealt with thiis before. My hunch is that maybe by upgrading to outlook 2007, this problem would get resolved. She doesn't want to use outlook express, which has it's own problems and is not supported any more.I am clueless to what would be the next step.

A:Outlook 2003 has wrong date stamp

I made sure the time, dsate and region was correct in the control panel and even in the bios. and it was correct.

9 more replies
Answer Match 66.78%

Today I was advised by a friend that my date stamp on my email came in a couple hours ahead of what time it actually was. I noticed the same thing on my incoming mail. The thought was my clock was off, but it was fine. When I open the mail the date stamp is correct. I believe I took in an update from Microsoft yesterday that addresses the fact that Daylight Savings Time is coming three weeks earlier this year than XP is expecting. I there any word out there of this being a flaw in the download?
 

More replies
Answer Match 66.78%

In Excel 2007, Is there a way show a date stamp of when data was entered into a cell? So when you hold the cursor over the cell it shows you the date the data was entered?
 

A:Solved: Excel 2007 date stamp

7 more replies
Answer Match 66.78%

I took several pictures with my digital camera and failed to insert the correct date after batteries were charged. the computer now reports the images taken on the wrong date. Is there a way to correct the image file date stamps using the registry or one of the XP power tools?

More replies
Answer Match 66.78%

Windows 7, Windows Live MailWhen I print out an email there is a date stamp at the bottom of every page. How do I stop the date being added to the email?

More replies
Answer Match 65.94%

10 - 20% of incoming emails get a WRONG Received date stamp in the navigation pane. On 15 Dec 2012 some emails got '25/01/2000', on 16 Dec 2012 some were stamped 26/01/2000 and a few hours later in the day '27/01/2000'. The emails originate from different senders including one from management software in this computer. That software sent me 5 emails at much the same time, four of which were stamped correctly but one '27/01/2000'.

Most emails are date/time stamped correctly but those stamped wrongly end up right at the bottom of the chronological list in the Navigation pane because of the old date. They are easily unnoticed.

The 'sent' date/time stamp in the email header always seems correct.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz, Intel64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 4023 Mb
Graphics Card: ATI Mobility Radeon HD 540v, 512 Mb
Hard Drives: C: Total - 359228 MB, Free - 213201 MB; E: Total - 15359 MB, Free - 3001 MB; F: Total - 2035 MB, Free - 1261 MB; I: Total - 953867 MB, Free - 215174 MB; S: Total - 99998 MB, Free - 94349 MB;
Motherboard: Hewlett-Packard, 1471
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

A:Outlook 2010 Navigation Pane Date Stamp

check time & date on your computer
 

2 more replies
Answer Match 65.94%

So I'm pulling in a date in the format (MM/DD/YYYY HH:MM:SS AM/PM) Is there a way that when I use a make table query, it only returns the Hour in the format of a number in the field instead of the date stamp?

So:

submit_date
8/20/2008 10:59:27 AM
8/20/2008 11:00:10 AM
8/20/2008 11:01:27 AM

Would be in the new table as

10
11
11
Is this possible?
 

A:Solved: Date Stamp to Hour Conversion -- Access

10 more replies
Answer Match 65.52%

My wife's cousin has a Sony FD 73 camera. I don;t know how old it is but it uses a 3.5" floppy disk to record the pictures.
The instruction book I downloaded says the recommended OS is Windows 3.1 Windows 95 or later, so it is sort of an antique I suppose.
He needs to have the date embedded in the pictures I can't find a setting for this in the manual. Is there a way to change settings so he can do this?
Thanks.
 

A:Setting date stamp to display on photos in older camera

10 more replies
Answer Match 65.1%

Have set the correct time zone, set the date and time, and within half an hour, the time jumps ahead significantly. Time then continues jumping periodically, and date as well. Any patch available for this?
Thanks.

A:Date/Time jumps after correct setting of date/time/timezone?

Welcome to the Seven Forums

Perhaps a change of cmos battery is needed. What is happening is a sign of the battery having packed up.

2 more replies
Answer Match 64.68%

I have this problem. When I save an email with the option "save as" from windows mail IT will print the current date without maintaining the mail by default, but if you drag the email with the mouse and loose it in a folder now. I'm trying to fix this with this, but, did not work:
1) the .eml files change to the present date when they are indexed by the search indexer; this is, a few seconds after creation. Thus, backup/restore/sync will not work properly, but indexing.
2) if you delete that mentioned registry key, then the indexing of .eml files no longer works, i.e. you cannot find them in a full-text search. However, backup works now.
3) it is unknown whether the other solution, proposed by alecamiga, to link .eml to thunderbird and write lock the files, does the same or works better.

thaks

More replies
Answer Match 64.68%

Somehow some time back I set Word 2010 to show a date on every saved page that I have. The date shows up on the bottom of the page on the left side. It also shows on a saved document for an envelope that I made. I want to delete that particular date stamp but when I open the envelope, I cannot figure out how to delete it on this item.
Any suggestions would be appreciated.
 

A:Solved: Word 2010 Want to Delete a Date Stamp on one Saved Item .

11 more replies
Answer Match 63.42%

I am looking for a way to search for files created in a time range eg 5pm to 8pm regardless of date.

My search is specifically for photos taken at this time of day, for light reasons, and my type can be NEF or JPG or TIF (happy to search 3 times if necessary)

And also happy to use 24 hour clock if necessary.

Any suggestions appreciated.

I have about 420000 photos to search. 

More replies
Answer Match 63.42%

Hi,

Would anyone please be able to advise me how to use Windows 7 search to find all files on a PC that were created or modified after a selected time and date?

I can do this easily in XP but just cannot get this work in Windows 7.



Thx
Auld Bint

A:Search For All Files Created or Modified After A Time & Date ?

If you have explorer.exe open, for eg. Computer. In the search bar at the top right of the window when you click on that A pop down will show and you can add "Date Modified + Size" filter.

2 more replies
Answer Match 62.58%

Has anybody been able to figure out Microsoft's time/date stamping. Many times I have looked at the properties of a file and the modified date is before the creation date. Another thing that I can't figure out is why the access time is the immediate time, I mean the now time, I know I am accessing it right now, I want to know the last time it was accessed. Is there anywhere else in window that does this better than just right clicking on a file and going to properties or did Microsoft fail horribly.

thanx
 

More replies
Answer Match 62.58%

See attachment.

This mail came with the time, 8:34 AM, on it. Exactly what does this time signify (emphasis on "exactly").

Is this time obtained from the sender's computer at the time it was sent (in which case it could be incorrect if the time on the computer is incorrect)?

Is the time obtained from the sender's SMTP server at the time it was received by the SMTP server? And, if so, is it adjusted to the sender's time zone if the SMTP server is in a different time zone from the sender's computer?
 

A:Exactly what does this time stamp mean?

8 more replies
Answer Match 62.16%

To me if a started a file a week ago be it a Word Document, or whatever then last week is when it was created. If the day after I do something to that file than that day is the date when that files has been changed, or as Windows puts it, 'modified'.
What bothers me is if I now make a copy of this file, a simple cut and paste, for example, its Properties will now tell me that the file was 'created' today. Well NO it wasn't created today it was only copied today. And that though this newly copied file may have been 'created' today that is misleading. To me very much so. Let's face it should the original file be deleted for whatever reason there is now no evidence as to when this file was actually begun (unless there is actual text within the file stating so) only when it was last accessed or last modified. Files are moved from one folder to another or to another subfolder or to another computer all of the time.
Doesn't anyone feel something is wrong with this? It is something that has bothered me since the beginning of time. Anyhow, is there a way of stopping windows from doing this? This would imply one or both of two things -1- Have the "Date created" not change when something is copied OR -2- Have an extra entry in its properties saying "Original date created" or 'Date copied" or something to that effect.

(One would think that in this day and age of Identity theft, High-tech forgeries and high-tech CSI forensics such a detail would be important)

A:How to keep the original date of a file created as is when it's copied

After a quick google search i found this it may be helpful it may not: How to preserve file attributes when one copies files in Windows? - Super User

1 more replies
Answer Match 62.16%

Since there are two actual times that are unique for each single piece of email, time sent and time received, and they can not possibly be the same.

Is the time that an email leaves your PC, . . which is the time born on the email record in the sent file, . . the same time it bears when received by the recipient ?

A:Time Stamp on Email ?

Depends on a lot of things. First and foremost the way the sender and recipient mail servers are set up. Do they use UTC time or do they use local time? If you have that information then you can calculate time differences.

Other factors play into it such as when you send does your mail server have a malware scan queue so there is a delay? Is the mail sever set up to send in bulk at specific intervals. Like wise on the receiving end.

As I said many things can come into play when you hit the send button and dispatch your email to the ether.

4 more replies
Answer Match 62.16%

When the user receives a voicemail on the land line, they are sent an email via a voicemail-to-email tool. The email has a copy of the voicemail, duration, phone number, etc. The time stamp within the email is correct. However, the time stamp that Microsoft puts in the message is incorrect. It is off by approximately one hour. Both the time and date settings and Outlook settings appear to be correct though. The time stamp that I am referring to is below the Respond Group within the Message tab. It is directly above contacts name and the subject of the email. In Outlook options, there is only one time zone selected, which is: UTC-5:00 Eastern Time US & Canada. The data and time settings for the computer are correct too. When I forward the original email as an attachment and subsequently open it on a different workstation, it has the incorrect time displayed too.

I have rebooted the workstation, performed a repair to Office, and opened the affected emails on another workstation (same problem). Any ideas how to resolve this problem?

A:Time Stamp Incorrect

Have a look at this MS website, which mentions Daylight Saving Time as being a possible cause.

https://support.microsoft.com/en-au/kb/2466942

1 more replies
Answer Match 62.16%

windows xp was working fine and it just froze so i restarted it
and it went to the disk checking and it came up with
invalid timestamps and it scrolled through a list fast i could not catch most of it and then went to the windows xp click your user name login screen

and the mouse moves until i click on the place to put my password and it freezes . . i've tried going back and restarting using safe mode, and even restore previous settings but it doesn't work

is my files screwed or is there any way of salvaging it?

i know this is kinda vauge and i could try to get more information if it is needed. some of the work i have on my computer is very valuable.

More replies
Answer Match 62.16%

I used to have an @function which recorded time so that it did not update. Any ideas? I've tried @timevalue(@time) but it still updates. There is a way to freeze it but I can't remember how I did it!.
 

More replies
Answer Match 62.16%

We've converted most of our pc's from XP to Vista 32 bit but have an issue when viewing shared pdf files from our FTP server. On every existing xp machine the date created time is correct. On every Vista machine the (date created / modified) time is off by 6 hours. I've checked my time zones and they are correct. Any ideas?

More replies
Answer Match 61.32%

if someone changed the date and time on a document, is there any way someone could go into a hard drive and tell that it had been changed

A:Any Way to tell when someone changed document time stamp

Here is a start.has time and date been changed on a documenthttp://is.gd/Se55y3http://www.techrepublic.com/article...http://windows.microsoft.com/en-au/...http://tsr-soft.com/products/copy-c...http://dottech.org/104563/windows-r...

2 more replies
Answer Match 61.32%

I have a system image created today at 9:58am according to Windows Explorer. When I boot the Repair Disk and select that image, it shows the time as 6:59am --3 hrs earlier.

I checked my BIOS and it shows the correct time.

Anyone have any idea why this difference?

Thank you.

A:System Image Time Stamp

When you used the boot (rescue) disk, were you prompted to enter your timezone at one point after Windows booted up?

I suspect this may simply be a matter of setting the correct timezone when the disc-based Windows prompts you for it.

2 more replies
Answer Match 61.32%

I have a new surveillance system at a home I bought to flip and I have been having all sorts of problems understanding its setup. I have called Samsung's tech support many times for various problems and their universal solution for every problem is to reset the unit to factory defaults before working on any problem. I've been through that so many times that my frustration with their tech support has now turned to anger. The re-setup of all my users and other customizations after their lame tech support costs me hours of work afterward.

So, here's my problem: I want to use the DVR's synchronization with an internet time server; but I can't find the correct settings. When the DVR's console displays the correct time, the time stamp on alert e-mails is several hours off. If I adjust the GMT, so that e-mail alerts have the correct time stamp, the time displayed on the DVR's displayed time is several hours off.

I'm in the CDT zone (USA) and I use a futurequest.net mail server ( [email protected] )

Can anyone help me with this?
 

A:Having Trouble with GMT, E-mail Time Stamp, etc.

16 more replies
Answer Match 61.32%

Receive an email at 5:24 PM (outlook express verifies time on my computer)

(from the header)
Received: from fep3.cogeco.net (smtp2.cogeco.ca [216.221.81.29])
Received: from 236MM (d221-84-244.commercial.cgocable.net [216.221.84.244])
by fep3.cogeco.net (Postfix) with ESMTP id ED17545F
for <[email protected]>; Fri, 13 Apr 2007 17:24:27 -0400 (EDT)

My clock is correct, senders clock is correct ... I go to forward the message at 5:24.
See below the time sent: 1 hour ahead (6:24)

Where is this time coming from, headers and clocks are all OK ... I'm stumped,
and it appears to be causing a spooling backlog on certain mail servers.

Any suggestions or thoughts, as to why this is happening?

----- Original Message -----
From: Sender
To: 'Me'
Sent: Friday, April 13, 2007 6:24 PM
Subject: RE: mail test
 

A:Email Time Stamp Problem

1. Check to see if you are in the correct time zone; not only if your clock says the right time. (same area as you would go to change the time)
2. Check through the settings of Outlook Express to see if there is a place you can change the time zone.
 

3 more replies
Answer Match 61.32%

My computer clock says one time and my Outlook received mail says another....about three hours earlier. I sent myself a test mail at 7pm and it read that it was sent at 3 pm.

Please advise!

Thanks
 

A:Time Stamp In Outlook Express

Check ALL of your settings.

Check your location and time zone in Control Panel - Regional Settings. That on the assumption you are running Windows.
 

2 more replies
Answer Match 61.32%

Let me start by saying this is for a good reason. I have very nosy in laws who ask to many questions.
I have a simple question that seems to have a hard answer. Here it goes.
I would like to know how to change the time on my email from yahoo,Google or Hotmail account to say a time from a different time zone when i email my in laws. I thought it was as easy as changing the clock time on my pc, but they still get my real time not the one i want them to get. I wonder if there is a better way or if there is a real way to change the time.
 

A:How to change time stamp on my email

Hi, and welcome to TSG.

There isn't a way that I know of, as those services are running through webmail servers.....and truth told, I can't see any valid reason to deceive anyone regarding the timestamp of emails, so I'm going to have to close this one.

thanks for understanding,

v
 

1 more replies
Answer Match 61.32%

I create many new temporary folders every day. I am looking for a quick way to paste a time/date stamp for each new folder name. Wondering if there is a way I can link the time stamp to a windows hot key and use a paste rule?

Don't want to use excel/word/cmd prompt and copy paste over to slow.

Google turned up useless so I knew I could turn here for some assistance!

Thank you.

A:Place Time Stamp as a folder name

You can use the %date% and %time% environment variables in a DOS prompt.

Based on this, you could edit the registry to place an Explorer context menu shortcut to a command that creates a new folder in the current directory, along the lines of mkdir "Temp created on %date% at %time%".

Unfortunately this won't be of much help - I just realized the date includes slashes "/" and the time uses colons ":", both of which are invalid characters in a file/folder name.

7 more replies
Answer Match 61.32%

Since version 7 Internet Explorer changes the "modified" time stamp of a *.url (favorites / bookmark) file when used. It changes it to the current date, so that you can see when you last used the link.

I want to disable this function because it interferes with my file synchronisation program. My synchronisation program sees it as if the url was changed, which is awkward as it isn't changed, only the modified attribute is updated.

Can this be done?

A:Disable URL time stamp change with IE7

Find your Favorites and click on the top folder and set the "Read Only" attribute for all files and sub folders.

1 more replies
Answer Match 61.32%

Hello and thank you for your time and help!

On my friend's computer, I am having the exact same problem as described in this post:

Time Stamp Wrong

The last reply says:

It is obvious that your ISP is messing around with time stamps. In that case, I guess you can't do much. It doesn't matter whether you use dial-up or cable.

All that you can do it call up your ISP customer care and try to confirm that they actually are doing this.Click to expand...

I have contacted the ISP and they assure me that it is not the case. They have proven it to me by sending me a test email from them to me and that email has all the correct times on it. However, when I send a test email from [email protected] to [email protected] the time difference is exactly 3 hours behind when I receive my own email back.

I asked to speak to a supervisor and he assured me that the problem is within the settings of Outlook Express - for which they don't give support. I believe him as my test email and his test email prove that the times are not being changed on their servers.

The actual clock on the computer is perfect.

How do I change the time settings within Outlook Express so that the incoming emails will have the proper time stamp please?

My friend is using Outlook Express 5.0 and his computer is older - an e-machine - so we do not wish to update the Outlook Express.

Thanks
Jocelyne
 

A:Solved: time stamp problem

9 more replies
Answer Match 61.32%

Hello,
 
I'm trying to batch change the time and date of a bunch of folder (and files within each folder) residing on a portable USB harddrive.
I have tried several software to do this, they all worked ok for the files, but even though they all claim to be able to change the time/date of folders, they all fail. The folders are not being used by any other programs and they are not write protected.
What could I be doing wrong?

A:Windows fails to change time/date attributes of folder (files work ok)

can someone please reply?

3 more replies
Answer Match 60.9%

Hi, I've a problem at work, one of my co-worker on different shift is causing problems by putting a filter to certian folders in Outlook so that other workers on duty on different shifts cannot access the contents of those folder in the performance of their job.

It's no use in talking to the immediate boss, who considers him as his personal pet, willing to blame other workers for his antics.


I already know how to remove the filter, but other workers don't, besides I want a more permanent solution to this problem. (He's been deliberately witholding information he was supposed to pass on so that other workers can look foolish.)


I want to be able to trace digitally, get a time stamp when the filter was applied to those folders so that I could formally charge him (he's the only one with access to computers during his shift) with sabotaging the work.

Does anyone know how to get a time stamp when the filter was applied or setting was changed?
 

A:Outlook 2003 time stamp for setting changes

use NTFS to enable auditing

see this for the concept
 

1 more replies
Answer Match 60.9%

Hello

I'm seeing a very strange problem on Windows XP. If I have a file which was created at 11:00:00am, and then delete it at 11:10:02am, and recreate it at 11:10:10am, the new file gets the OLD file's creation time (11:00:00am).

However, if I wait until 11:11:02am, it will get the correct file creation time stamp (11:11:02am). Its as though I have to wait for the one minute boundary to rollover before the new creation time gets picked up.

(By recreate, I mean the file has the same name).

Anybody know why this is happen? I assume some kind of caching....

Any info would be helpful! Thanks!
 

More replies
Answer Match 60.9%

Hi All,

Man its been long since i asked a question but ever since i ran into this problem i remembered you guys, as you have helped me out before! i think to give a title to this problem would be "Automating of pressing keys for timestamp on a cell"

Ok here is the problem i am facing ............
I have to record so many stock trades in realtime when client makes a call etc. As this timestamp would be neat for feedback to tell the client when the trade was made and helps me remember when i executed the persons trade. On my spreadsheet i have a buy, sell , quantity, price, account number and time of execution column.

First off i know the ctrl+ shift+ : [and now() ] function to get the timestamp on a cell. Now what i cant figure out is a way to get the current timestamp in cells multiple times while making trade orders without having to press those keys all the time!!!

How can i quickly get the current time stamp of a trade executed without having to use/press the ctrl +shift +: command function???, if i get that formula/macro i can do a copy paste function on the remaining of the column so i dont have to do it all the time and just focus on entring the buy and sell details of the trade. I dont have too much time to stickon one entry as i have to move on to the next trade! plus if i continue doing this as is, i'll have carpaltunnel syndrome in a week !!!

Hope this makes any sense? please help!!!!!!!!!!!!!!!

Thanks.

P.S.....Someone showed me this but made... Read more

A:Excel Time Stamp formula (for stockmarket)

faisal_ahmad said:

P.S.....Someone showed me this but made no sense on how to use it or if its any good to me.

Private Sub Worksheet_Change(ByVal Target As Range)
Range("A" & Target.Row) = Now()
End Sub
'Specify AClick to expand...

This is an event procedure. It goes in the worksheet module. Rightclick the sheet tab & select View Code to get to the worksheet module ; you would paste it in there.

When you make a change, it timestamps in col A of the row you're changing. So:

(a) you need to specify which column should be timestamped (if not A)

(b) it will update if you make subsequent changes anywhere, which you may not want.

Here's one that'll stamp in A when you first enter in D ; it'll also blank A if you blank D. It's a question of how you want it to work.

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column <> 4 Then Exit Sub
If Target = "" Then
Target.Offset(0, -3) = ""
ElseIf Target.Offset(0, -3) = "" Then
Target.Offset(0, -3) = Now()
End If
End Sub
 

2 more replies
Answer Match 60.9%

Hi I have had a consentexe. issue for awhile now and I noticed its on both computers and both are less than 6 months old. Anyway is there a way to replace/repair a timestamp in a certain program like consentexe.? I know this is a user account program that is part of win7 64 bit but what exactly does it do and could it cause my issue with not having priviledges to use large page files (Tip from Si Sandra Memory Benchmark) and I have other access issues I think that now I have two user accounts instead of one because I am now listed as standard issue with admin. priviledges but before I was only the administrator. This error in the CAPI2 log happens a boot and about once a hour after boot. Can anyone help my out with this THANKS?Log Name: Microsoft-Windows-CAPI2/Operational
Source: Microsoft-Windows-CAPI2
Date: 9/18/2010 7:46:54 PM
Event ID: 11
Task Category: Build Chain
Level: Error
Keywords: Path Discovery,Path Validation
User: SavannahMick-PC\SavannahMick
Computer: SavannahMick-PC
Description:
For more details for this event, please refer to the "Details" section
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" />
<EventID>11</EventID>
<Version>0</Version>
<Level>2</Level>
<Task&g... Read more

A:I have a CAPI2 issue with consent.exe. and its time stamp on both pc.

Event ID 4107 or Event ID 11 is logged in the Application log in Windows Vista, in Windows Server 2008, and in later versions of Windows and of Windows Server

3 more replies
Answer Match 60.9%

I am positive this wouldn't be possible in Explorer (XP) or (Win 7), so I'm wondering what utility would be possible, or would it need to be a specially written program?

I didn't change the clock on my camera and want to change the timestamp on my photos to add 6 (or 7) hours to batches of photos.

Thank you.

More replies
Answer Match 60.9%

A user of mine is running Outlook Express on WinXP.

He accidentally set his time to the correct date, but in 2008, ie. one year ahead.

He quickly fixed the issue by setting the date back to 2007, but still all the received mails are stamped as if they were received in 2008.

Is there any way to revert this to a correct state?
 

More replies
Answer Match 60.9%

From viewing previous posts I understand that it is advantageous to disable the titled function. Please tell me how that it done. Thanks.

P.S. What is a poll?
 

A:Disable NTFS Last Access Time Stamp

11 more replies
Answer Match 60.9%

Hi,

Im using this code to timestamp cells. I have just picked up the code from the internet and dont do VB. It works great but I want there to be 3 columns as opposed to the 1 this is for.

ive attached the excel sheet, the protection password is assure
Private Sub Worksheet_Change(ByVal target As Range)
Application.ScreenUpdating = False
ActiveSheet.Unprotect Password:="assure"
If target.Column >= 11 Then Exit Sub
Range("D" & target.Row).Value = Format(Date, "mm/dd/yy") & " " & Format(Time, "h:mm:ss AM/PM")
ActiveSheet.Protect Password:="assure"
Application.ScreenUpdating = True
End Sub
 

A:Excel time stamp mutiple cells

16 more replies
Answer Match 60.06%

I have numerous archival files produced in wordperfect 12. When I install an upgrade of
wordperfect x6, must I take any protective actions to keep my archival files intact?
 

A:preserving wp12 files during installation of wpx6

7 more replies
Answer Match 60.06%

Hi,
I'm having a problem when i start up my comp. after logging into my user account, the monitor sorta "blinks" periodically.. as in, the wallpaper is there, but all the icons disappear. However, as soon as i open Norton Antivirus , the problem stopped (until the next time i restart the computer and log on).

On loggin in, I checked the cpu usage with taskmgr, and foud that it was goin pretty high (jumping frm 10%to 60% or 80%).. when i checked out the running processes, "EXPLORER.EXE" was taking up around 95% or so. i searched for the file explorer.exe, and got 3 results:
explorer.exe in C:\Windows
EXPLORER.EXE-082F38A9.pf in C:\Windows\Prefetch
and eplorer.exe in C:\WINDOWS\ServicePackFiles\i386

All these seem to be normal, if i'm not wrong. (?).

anyway, i ended the process explorer.exe, and on doing so, all the icons disppeared, and i was left with the wallpaper staring back at me. Hence i had to restart, and on running Scandisk, as it was scanning the files, ALL the files in my C drive had "Invalid Time Stamp" written next to it. Nothing seemed to be done to rectify the problem.

The only other problem with my computer of late, was when i was trying to uninstall jdk1.4.2_08 so that i could upgrade to the 1.5 version, and it kept giving the error "internal error 2869" and "fatal error in installatin of java". But i guess that's completely unrelated to this?

Could somone pleeease help me out with this?
IF... Read more

A:Help: explorer.exe-high cpu usage ; invalid time stamp

bump
 

1 more replies
Answer Match 59.22%

System:

Windows 7

Microsoft Outlook

This problem has been going on for a while. Husband uses computer for work and although most emails arrive just fine sometimes he gets an email which arrives up to a day later than the time the sender sent it (as time-stamped on the email and as checked directly with the sender). It's not always the same sender, and the one sender can have emails that are sent both immediately or delayed. It must be something in the relay process. The most annoying thing about this, apart from the email being late, is that when it arrives it slots into it's chronological position rather than at the top of the list, and these emails sometimes then get missed as they are in between already-received and read emails.

This morning I also received such an email. I received emails from my mother at 6.01 and 6.04pm respectively last night, on time. This morning I received an email from a friend time-stamped 6.03pm - but it didn't come until this morning and it slotted in between the two emails from my mother last night. I have copied the headers below and it seems one of the servers is adding on some hours for some reason. Is this anything that can be done about this?

I have changed the names of sender and recipient to Citizen1 and Citizen2 below for privacy:

Return-Path: <[email protected]>
Delivered-To: [email protected]
Received: from ipmail06.adl6.internode.on.net (ipmail06.adl6.internode.on.net [150.101.137.145])
by mail11... Read more

More replies
Answer Match 59.22%

I have a table with a Date/Time field called Date Created, it is in the General Date format, and it is a time stamp (EX: 12/3/2004 3:00 AM). I know that if you have a date field that is formatted as a Short Date you can easily pull records in a query based off of a current date (EX: Date() as the criteria). I have tried using the Date() criteria as a parameter for a query, but I am unable to pull the current date's records. The query will work if I test the "Between #12/1/2004# and #12/4/2004#" parameter range, but I would like to be able to pull records for the current date without having to change the date range or even the date field to a short date in the main table. I've even tried converting the date within a query to display the date as a short date, by adjusting the field properties in the query, but the Date() criteria still doesn't work. Is there any other type of syntax that I could use within the query to make this work? Your help would be greatly appreciated.
 

A:MS Access 2000-Pulling Current Day's Records From Time Stamp

6 more replies
Answer Match 59.22%

In Outlook 2007 (on WinXP Pro SP3), I have defined a number of rules to presort incoming email into various folders. Not all of the rules work for reasons I cannot determine (that's a question for another time), but most do. Oddly, any messages automatically moved to one particular folder always have a received time stamp of five hours earlier.

That is, a message that arrives at 9am is timestamped 4am.

Now my local timezone is EST, so this is the opposite of what would happen were the machine running with a timezone of, say, GMT, where timestamps would be 5 hours AHEAD (i.e., messages arriving at 9am would be timestamped 2pm).

As a software developer for a company with international locations, I occasionally must reset the timezone and time on my machine in order to test software, and several times I have had to set my machine to JST (Japan Standard Time, or GMT+9) but I have long since set it back again.

To anticipate several questions, both the folder and the rule were defined before any of the periods during which I was running with an altered time/timezone (i.e., none were created during one of those periods), neither did I change (nor save) any rules during those periods.

Anyone have any idea what is happening? How may I reset the timestamps for this rule/folder?
 

More replies
Answer Match 59.22%

Greetings, and thanks in advance for your help..

Awhile back I formatted my Windows 10 PCs to show ddd dd-mmm-yyyy on my taskbar clock. This worked happily on my desktop and laptop for months, maybe even a year +

Now (probably starting in the past couple days, if not today), on one of those two PC's, this format will no longer display. It is Okay on the other PC.
What has changed that the taskbar clock space used to expand to fit the "short date" format, but now it will no longer expand - and instead just refuses to display the date at all. (NOTE: I've verified the issue by testing shorter formats -- short formats, like "ddd" show up correctly. Only if you request a longer format will the date not display - evidently because it is too long for the clock area. )

Additional Notes that may help:

* "Working" pc is running build 10586 PC with too small a clock space that won't expand -- Build 14393

*Other differences: Notification/Action center Icon is left of clock on the working PC - Right of clock on the non-working
Right- Clicking on task bar gives "properties" option on working PC -- But "Settings" option on the non-working

( I don't want to prejudice responses - but clearly the implication to me is that some recent OS update is most likely the culprit.)

Thank You

More replies
Answer Match 58.8%

Topic Title:
Faulting application name: Explorer.EXE, version: 6.1.7601.17567, time stamp: 0x4d672ee4
 
 
I have posted the following in the Microsoft Community as found by following this link
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/faulting-application-name-explorerexe-version/0b2155ce-3424-49b4-8b1b-e5e4d7a607c3
 
 
 
Details
Here is a link to my Operating system properties with installed application software produced by Speccy.
http://speccy.piriform.com/results/X86zFAyUNbO73hK5WTVoezp
 
I am having random Explorer crashes and situations where the taskbar does not respond or if I select Start or the Explorer folder it does absolutely nothing. I had a Restore point that goes back to 6/1/13 but that is not earlier than when the problems first started happening as I recall having memory issues. On 6/2/13 I had to contact Lenovo Priority Support who then referred me to Microsoft to reopen Case #1202729680 created on 4/11/13 in response to a reoccurence to "Windows Activation. An unauthorized change was made to Windows. Windows has discovered a change that will result in limited Windows functionality. Use the link below to find out how to fix Windows.
Popup dialog options:
> Learn more online
> Close"
 
I selected Learn more online and it performed a Windows validation then displayed results on web page saying "Enter a genuine Windows product key.
Windows validation detected and repaired an activation explo... Read more

More replies
Answer Match 58.38%

Hello, I have spreadsheet with a number of dates and times ie (11/19/07 8:57 AM) in column A and data going along with each of these dates and times from columns B-CK. I am trying to limit the list to show the information that is for all times after 2:45PM. The problem is I cannot sort by time and the dates attached to all the times span from 2004-2007. Please help!
 

A:Stripping the date portion of date/time in excel

7 more replies
Answer Match 58.38%

I am looking to set up a macro or formula that basically inserts the current time when a cell is filled SO:

when a2:a100 is populated with any thing then the corresponding C cell will be populated with the time.

AND

when e2:e1000 is populated wiith anything then the corresponding D Cell will be populated.

Currently I am using this macro.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("A6:A100")) Is Nothing Then
With Target(1, 4)
.Value = Time
.EntireColumn.AutoFit
End With
End If
End Sub

which works great for the A and C cells

but it does not work for the other one.. how do i add and modify this so all my needs are met.
I need another 2 sets of 2 macros accross the sheet for time entry.
 

A:Excel date auto populate date/time

11 more replies
Answer Match 58.38%

I have a Date/Time field that I need converted to just a Time field.

It comes back with 2/11/12 0:00:00

I need just the 2/11/12

I thought about changing it to a text field but I think there will be an issue with the month because it does not bring back a 0 in from the months with only 1 digit.

This table that I am creating is being sent to a txt file and that is where I see the issue. It looks good in Access, but not the txt file.

Any suggestions?
 

A:Solved: Access - Convert Date Time to Date

10 more replies
Answer Match 57.12%

I managed to screw up my XP Media Edition OS and couldn't access Windows. I Installed XP Professional and after it was up and running found that a file called "My Backup (date and time)" was created. I have been able to restore quite a bit of the files but I can not for the klife of me locate and restore the Outlook 2000 files. Where are they and how can I get them back?

A:[SOLVED] Does &quot;My Backup (date and time)&quot; contain Outlook PST files

What's the file extension (ending) of this "My Backup" file?

If you created it, based off the date and time it gives, you'll know what you created it with and we'd also like to know that so we know what the backup contains.

Are you saying you formatted (wiped) out a drive and you're now looking for files on it that you didn't backup elsewhere?

If that's the case, very dim chance of retrieval.

4 more replies
Answer Match 57.12%

Hello there & Happy New Year.

I have encountered this particular inconvenience on the 2nd day of 2012 while i was transfering photos and files into my PC with Win7.

In my Win7 PC, all files/folders created or modified within Dec'2011 and earlier are now all grouped under as "A Long Time Ago". This happens when I changed the folder to be "Group by Date" or "Group by Date Modified" with a combo of "Sort by type". I tried sorting in different ways of view to see if I can get it back to what it should be. Then i realised even folder newly created on 25 Dec 2011 is also grouped as "A Long Time Ago" too. I am not sure if this is an intended feature.

The only helpful part is that i will still see the newer files in chronological order if I sort by date modified on top of group by date modified.

I have been using this setting for folder view even for Win XP. As for Win XP, i will get "Yesterday", "Last Week", "Last Month", "Last Year", "Two Years Ago" and ultimately the whole chunk of much older files under "A Long Time Ago". Such perfect chronological order.

I tried to google for a while and not much of returns to this issue I am having. Perhaps majority of people does not group their files/folders in such way. But for me, I like the way how it was displayed that I know i have edited/created/moved whichever files/folders last year, the previous month or ... Read more

A:Win 7 sort by date issue - 2011 files/folders now "A Long Time Ago"

Same for me! Must be a Windows 7 thing, and hopefully someone at Microsoft is onto a fix.

4 more replies
Answer Match 55.44%

Automatic date and time was incorrectly displayed so we changed it manually to correct date and time and power cycled the device off and on and the date and time again is incorrect.

More replies