Tech Problem Aggregator

Laptop Shuts Down When HDMI Connected To Television

Q: Laptop Shuts Down When HDMI Connected To Television

Hi, new here. After searching for information on my problem I could not find a single thread with the same issue.
Having said that, here goes.

I just bought a new TV and attempted to connect it to my laptop via HDMI. I have used both the laptop and the cable with other TV's in the past with no problem but when I connect the two the laptop powers off as if the power has been cut. It will not boot when the two are connected and only happens when the TV is on. The laptop will boot into safe mode but it seems that HDMI out is disabled in safe mode so I cannot test it. I have checked and my graphics drivers are current. Hope someone can help! Thanks.

More Information: I have since exchanged for a different TV (Different Brand) for an unrelated issue and it doesn't work with this one either, same issue.

A: Laptop Shuts Down When HDMI Connected To Television

I found this article on the Forum not sure if it will be any help

Computer shuts down while TV is connected through HDMI

9 more replies
Answer Match 83.58%

Not upto speed on this but i have a small hdmi port on my acer laptop win10 and 2 larger hdmi sockets on my TV Is that the best way to go for streaming football Or is there another way thanks

A:hdmi laptop to television ?

You can either buy a cable or an adaptor (for a standard HDMI cable) click here anything that plays on the laptop can be seen on the TV click here
then

1 more replies
Answer Match 81.06%

I have an acer laptop E5-573-35AQ and previously could stream to television.  Recently all stopped.  I can detect two video (pc and LG tv) but can get no picture.  Did I press the wrong key or something?  I tried updating and using the function key to no avail.

More replies
Answer Match 81.06%

I have an acer laptop E5-573-35AQ and previously could stream to television.  Recently all stopped.  I can detect two video (pc and LG tv) but can get no picture.  Did I press the wrong key or something?  I tried updating and using the function key to no avail. not the cable

More replies
Answer Match 73.08%

Hi there

I previously had Windows XP on my laptop and when I connected it to the tv, everything was perfect.

Unfortunately my computer crashed and I had to install Windows Vista on my computer. Now, when I try to connect to the tv, its black and white on the tv. I suspect it is my Vista settings.

Any one that can perhaps help me?

A:When I connect my laptop to television, the television is balck and white

Heyy,
There was a thread similar to this,

I replied saying;
What is the make and model number of the laptop?
You could try updating the video card drivers, or play around with the windows settings, if its an Nvidia video card try having a look in the nvivia control panel at change resolutions under the display tab.

I had this problem when i plugged my computer in to the TV downstairs. Turns out it was set to S-Video instead of PAL, that might be your problem

Hope this helps,
Daniel =)

1 more replies
Answer Match 68.04%

I really need someone's help here. I am trying to connect my sony vaio to my older sony television with an hdmi to rca/vga cable, but it's saying that there is no projector detected and I'm not sure how to get it to work, and not sure how to clone with nVidia's geForce G210M. Can anyone help me?

A:HDMI to RCA on older television

As it says you need a projector. Or you need to get into Nvidia's control center and see if there is settings in there to let you use a dual monitor option.

1 more replies
Answer Match 67.62%

The graphics card is a GF9500GT 1024M DDR2 128B CRT DVI HDMI
I connected to my tv with HDMI but no sound comes through , I connected with DVI and the sound works.
I was told I need to connect my graphics card audio to my motherboard with a two pin plug lead .
I bought the lead connected it to the graphics card but I dont know where to connect the two plugs on my motherboard. My Motherboard is a Asus P5KPL-AM IN GB
Please can anybody help
Kind regards
John

 

A:no sound when connecting hdmi to my Television

The hdmi should take care of audio and video to the tv
What OS do u have? In win 7 have u made hdmi default??
Dvi does not handle audio?? So don't understand what u mean by "I connected with DVI and the sound works"
Also what cable are u referring to?? To connect 2 plugs to the mobo??
 

2 more replies
Answer Match 67.62%

I have an H50-55. When I connect the HDMI port to a Panasonic televsion (that also has an HDMI port) the video works.However my Dell U2412M LCD has DVI and DisplayPort but not HDMI. So I bought an HDMI to DisplayPort cable, but when I use that there is no video. I tried a different HDMI to DisplayPort cable and it still does not work.The Dell also has a VGA input, and connecting that works, but would prefer to use the HDMI output for quality.What is the trick to get the H50 working with an LCD that uses DisplayPort and does not have a native HDMI input?Thanks 

More replies
Answer Match 67.2%

I have an Elitebook 8530p that I am trying to connect to my TV so I can view online TV on my TV screen. I can stream the online TV and watch it on the laptop ok, and I can connect the laptop to the TV with HDMI cord and I see the picture on the TV too, but as soon as I push the play button and it starts to stream the Laptop freezes. This happens on both TV's in our house with different HDMI cords which leads me to believe it is an issue with the laptop (not the TV's or cords). I have tried pushing the Fn + F4 buttons to clone it but that makes no difference. I have tried changing the display settings but I don't really know what I am doing! Another post said to choose full HDMI setting but even though the laptop has a HMDI port it didn't appear to have that setting. Is it too old?
 

A:Laptop freezes when connected to TV through HDMI

The problem is most likely the video card driver, so yes technically your laptop is too old, but luckily you can save that geezer! If updating the drivers doesn't work then you can try changing resolutions.

Solution found here:
http://answers.microsoft.com/en-us/...o/7fafd27d-816f-456c-afa6-3c7fec3909e3?auth=1
a. Click Start, and then click Control Panel.

b. Click System and Maintenance, click System, and then click Device Manager.
Note If Control Panel is in Classic View, double-click System, and then click Device Manager.
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.

c. In Device Manager, expand Display Adapters, right-click the display devices, and then click properties and under the driver tab click on Uninstall.

d. When you are prompted to confirm that you want to remove the device, click OK.

e. Restart the computer.

After the computer restarts, the drivers will be automatically installed. Check after this procedure. Also check if you have any exclamation mark or cross marks alongside the display devices listed in device manager.
You can update the drivers using windows update. Refer to the below mentioned link and use the steps provided accordingly -http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly

You may also check if there are any updates for the drivers at the manufacturer website. You may even install the latest drivers from the manufacturer... Read more

3 more replies
Answer Match 66.78%

Hey guys. I have connected my PC to my HDTV (Sansui), and I cannot find an option in the TV for 1:1 Pixel Mapping. I need this because my TV is overscanning my laptops display and the taskbar and other images are cut off the screen. It is also quite blurry. I have the TV's manual here:

http://www.sansuiproducts.com/images/manuals/SLED2280D.pdf

I could not find an option in the manual, but maybe you guys could.

Many thanks.
 

A:Need help with my laptop connected to my HDTV (HDMI Cable)

6 more replies
Answer Match 66.78%

Recently my hard drive went out and I had it replaced with a solid state drive. The problem I'm having now is when I hook up my Samsung Smart TV through an HDMI cable (also tried a new cable with same results) I get wavy, scrolling lines on my laptop that go away when I disconnect the cable. The lines don't show up on my TV and this didn't happen before having my computer repaired.

The Staples tech wants to charge me again for diagnosing it after paying over $270 for a diagnostics and replacement of the hard drive. He said it's not possible for it to be a problem with the new hard drive so it would be another charge even though it didn't do it before having it repaired and my computer reformatted. I'm concerned I'm going to burn something out if I keep using it this way but I also don't want to pay more if it's something simple. He said it could be the motherboard or graphics card but I'm not sure whether or not to trust him. I'm a senior with little technical knowledge.

I want to use an HDMI cable so I can watch Xfinity programming that's available online only. I can live with it doing this as long as it isn't hurting my computer. Any help or suggestions is greatly appreciated.

MSI Laptop - 3 years old
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 2
RAM: 3886 Mb
Graphics Card: Int... Read more

A:Scrolling lines on laptop when connected to TV through HDMI

6 more replies
Answer Match 66.78%

Hi all,
Toshiba Satellite U400-157
Windows Vista Home Premium Intel Core(TM)Duo CPU [email protected]; RAM 4.00GB
Display Adapter: Mobile Intel(R) 4 series Express Chipset Family
Stage 1
Laptop connected to Panasonic LCD 42" with HDMI cable
Both LCD screen and laptop monitor diplay correctly
Able to change display settings and control cursor at laptop
Everything is working fine

Stage 2 two weeks later
When HDMI cable is connected, Laptop screen goes black, but the LCD screen works fine and the cursor appears on the LCD and can be controlled by the laptop

Stage 3 two (more) weeks later
When HDMI cable is connected, Laptop screen goes black, LCD screen is blank, no cursor visible
I right click laptop screen, go to Graphic Properties>Display settings and try and change the Operating Mode: from Single display to Two
Primary Device: LCD
But these choices are not available.
I go to Control Panel> Personalization> Display Settings
Drop-down menu shows
1. Generic PnPMonitor on Mobile Intel(R) 4 series Express Chipset Family
Select down arrow
2. (Default Monitor) on Mobile Intel(R) 4 series Express Chipset Family appears

Connected HDMI cable and try again
I have two Black Screens ...!
Have tried restarting comp then TV, and vice versa, before and after connecting HDMI cable, but nothing works.
(all other independent operations on the laptop and the TV work perfectly well)

Yelp, help, please ...
TIA
Mukund
PS I did not post correctly, so I ... Read more

A:Black screen when laptop connected to TV via HDMI

Hello, Do you have another HDMI cable to try , if not, do you have a VGA cable to use ?

26 more replies
Answer Match 66.78%

I have connected my HP Laptop with Windows 8 to my TV through an HDMI port. I watch netflix and youtube. A couple times a day the sound will just quit working. I check the audio and it says it is still hooked up to the TV. The only way I can figure out how to get it working again is to restart the computer. This has never happened while audio was playing, just when it is not in use for a little while.

Any help would be appreciated.

Thanks!

Luke
 

A:Laptop connected to TV through HDMI Sound turns off every now and then

HP has tens of thousands of different laptops. Which exact one do you have? The full model number will be on a sticker on the bottom and will be similar to DV9240ca or DV6-2130us.
 

3 more replies
Answer Match 66.78%

I messed up display settings for when I attach a TV via HDMI to my laptop. I set the system to display only on the TV (OK, not a totally stupid idea) and then picked a resolution the TV doesn't support (that was TOTALLY stupid!) When I disconnect the TV, laptop display works as normal. As soon as I connect the TV, laptop screen blanks and TV goes to Invalid Format. I have tried to change display settings through the control panel with the TV disconnected, but as soon as I plug in the TV, it goes back to the bad resolution on the TV and no laptop display.

Is this stored in the registry somewhere? I want to reset the flag telling the system to display only on 2nd display.

Please help

A:Invalid Format when laptop connected to HDMI TV

Hi OldWraith, welcome to the Seven Forums.

This should work:Connect the TV, don't mind the Invalid Format warning
Press WIN + P to open Display Switch dialog. You don't see it as it's on the non-working TV display but trust me, it's there:
(Screenshot from our tutorial Display - Change Main Display)
Press Right Arrow > Press Enter to change from Display 2 only to Display 1 only
Now you should have the desktop on laptop's display, you can change your display settings as you wish
Kari

1 more replies
Answer Match 66.78%

I have a Toshiba satellite L305-S5875 I have it connected to my Vizio HDMI HDTV to watch netflix with. It has been working fine except for the past week. When I unplug the laptop to skype and then plug it back into the tv when I am done I get a, "NO RGB signal" message from the tv. I don't know why it is doing this, I have been able to use system restore to get it working again, but it is no longer working. Any ideas?
 

A:laptop connected to HDMI tv was working now keep getting no RGB signal

Try this:

Hold down the input button on the right side of the Tv. This is the bottom button
With the tv off, press and hold the bottom button (input)

When the TV powers up and you see the input menu, release and press the button
to change the mode to your preference.

Hope that helps.
 

1 more replies
Answer Match 66.78%

Hey guys, I'm actually new here, so I am not sure if this is in the right forum page, but I need help. I have had a problem with my HDTV and laptop for a few months and finally decided to start a thread for help. The problem is that the HDTV is blurry and fuzzy when connected to my laptop via HDMI. However, I realize this is an overscanning issue, because in the AMD Catalyst Control Center, whenever I set the scaling for overscanning to 0%, the fuzzy text and screen is fixed, but the edges around the screen like the taskbar are cutoff the edge of the screen. I do not think my TV has an option for "Just Scan", but maybe you guys can find something I can't. Here is the manual:

http://www.sansuiproducts.com/images.../SLED2280D.pdf

Also, I am running Windows 8.1 with an AMD Radeon HD 7520G graphics card.

Any help is appreciated, thanks.

A:Need help with my laptop connected to my HDTV (HDMI Cable)

Not sure I can help but I have the same thing. I have a cheap TV and I think it has more to do with that. I play videos is all and not an issue there, just desktop is expanded past screen.

My TV is only 720p.

I'd love to see if someone has a fix.

5 more replies
Answer Match 65.94%

Hi,

I've recently purchased a Samsung T23A750 monitor and to my disappointment when I try to watch a movie the built in speakers are not functioning. I have a Sony Vaio Z216GX connected via HDMI to the monitor (HDMI-DVI) port. I can definitely see the video, but no audio is playing from the speakers. The built in speakers are not at fault- I did a self-diagnosis of the monitor and the speakers seem to work fine. I also set the monitor as the default for the audio and even when Win 7 says its functioning properly, the speakers still don't work. Conversely, setting the default to my PC speakers work fine. I'm sure its not the HDMI cable- I used the same one to hook my pc to my tv with everything working fine. Any ideas??

A:Monitor Speakers not working when connected via HDMI to laptop

make sure you have the latest drivers for the hdmi can check by going to the windows start bar and right clicking on computer and choosing manage then click device manger and open the tab were it says sound,video and game controllers if you see somthing related to hdmi and has a yellow triangle then right click on it and update software if no yellow triangle is there try it anyways if that doesn't help then post here again, hopefully someone who knows more about hdmi can help also because i never had hdmi but ive had audio problems with my speakers before and this is how ive fixed it before

2 more replies
Answer Match 65.94%

Problem started a little over a month ago on my HP laptop running Windows 7 64bit.

When I connect the laptop to my either of my TVs through an hdmi cord everything works fine. Videos run smoothly and the audio is in sync as if there's no problem.

If I try to watch a video on just the laptop though the problems start. If I try to play anything (songs/videos) in Windows Media Player then it says "Windows media player encountered a problem while playing this file".

When I play a video on YouTube the video runs smoothly but there isn't any audio to go with it.

If I go to control panel - sound - speakers and headphone properties and try to play a test sound it says 'failed to play test tone'

Attempted to update the IDT High Definition Audio CODEC driver but windows said it was up to date. Same thing with the Intel(R) Display Audio driver.

Thanks for any help

A:hp laptop audio and video problems (unless connected through hdmi)

Are you leaving the HDMI cable connected to the PC when you try to us the PC's sound (IDT)? Generally, when an HDMI cable is plugged in and detected the sound automatically switches from the "Speakers" (the IDT) to HDMI as the default audio playback device and thus no regular PC sound.

6 more replies
Answer Match 65.94%

Laptop audio works until I plug in HDMI cable to external monitor.  Looking for guidance on resolution.  Thanks,

More replies
Answer Match 65.1%

I have a Quadro FX 1800 graphics card fitted to my Dell Precision Workstation T7500 and am looking for a way to connect this to my Panasonic television (in addition to my normal PC monitor). The NVidia website states that the Quadro FX 1800 "Enables transport of video and audio to HDTV’s and other HDMI capable devices (via HDMI adaptor)". However, it does not make it clear whether you need to use a DVI to HDMI adaptor or a DisplayPort to HDMI adaptor. Neither does it tell you what audio and video formats are supported.
I have also read old forum posts elsewhere suggesting that an accessory S/PDIF cable might be required but without any proper explanation of where such a cable should be connected.  
Can anyone clarify exactly how to connect a Quadro FX 1800 card to a television and what audio and video capabilities are provided by such a connection?
David

A:Connecting a Quadro FX 1800 card to a television via an HDMI adaptor

There are no DVI to HDMI audio Adapters.  These only transport Digital Video.  There is no "Audio from your DVI standard." There are HDMI Breakout Boxes that would allow the merging of DVI and Analog Audio into a single HDMI connector.
http://www.hdtvsupply.com/hdmi-to-dvi-with-audio.html
HDMI to DVI with Separate Audio Cable
These HDMI to DVI-D w/Audio cable is made where the 3.5mm or 2 RCA audio is extruded along the HDMI and DVI cable in order to give an audio source to this all in one cable. This HDMI to DVI w/Audio Cable is great for connecting computers and the 3.5mm sound card output to high definition HDTV's.NOTE: This HDMI to DVI w/Audio cable does not break out the HDMI digital audio for the HDMI signal. It is a separate analog audio signal that must be plugged in on both ends to get analog audio. If you need to break out the HDMI audio see HDMI to DVI w/SPDIF Audio Converters.
HDMI to DVI-D (Digital) Cable with Audio Features:

HDMI with attached 3.5mm audio cable to DVI-D with attached 3.5mm audio cable can be interchanged with a 3.5mm female to 2 RCA male.
Video resolution is HDMI digital and the Audio sound is analog.
Pure digital video and graphics signals on one compact, high-performance connection!
Fully shielded to provide complete immunity to environmental EMI and RFI
An ideal choice for high performance computer graphics, HDTV and presentation applications
Color: Black
Sizes: 3, 6, 10, 15, 25, 35 foot
Resolutions suppor... Read more

7 more replies
Answer Match 65.1%

This is a question reagrding the Toshiba Satellite Pro T130-15F.

When I connect the laptop to my HP2159m monitor with a HDMI lead, the laptop detects the monitor as a digital tv. As a result it send an incorrect signal, which results in a poor picture quality. Furthermore, on the receommended resolution, the image is too large for the screen. I guess this is a shortcoming of the driver for the mobile intel 4 series chipset.

Unfortunately, the newer driver on the Intel web site cannot be installed on the laptop.

Is there a way to work around this problem without replacing the driver?

When will Toshiba release an improved driver that solves this issue? A quick search on the web convinces me (i) that I am not the only person struggling with this problem and (ii) that it is not specific to either this monitor or this laptop.

A:Monitor on HDMI interface incorrectly detected as digital television

>When I connect the laptop to my HP2159m monitor with a HDMI lead, the laptop detects the monitor as a digital tv. As a result it send an incorrect signal, which results in a poor picture quality

I had the same issue.
I had connected the notebook to my external wide screen monitor using HDMI cable.
Since it?s a full HD monitor I chose the resolution 1920 x 1080 (1080p).
But the picture was no perfect.

I purchased an HDMI to DVI cable and has connected my notebook to DVI on the external monitor.
This was the key?

The point is that my monitor has an TV input and monitor input? the PC should be connected to DVI. My PS3 is connected to HDMI.

>Is there a way to work around this problem without replacing the driver?

You can do this! I did it too.
I could install the Intel graphic driver in device manager.
I have downloaded the driver from intel page and then have updated the driver via device manager.
You have to use the advanced installation procedure which helps you to point to the driver and files which you have downloaded from intel page.

6 more replies
Answer Match 65.1%

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 3764 Mb
Graphics Card: Intel(R) HD Graphics, 1754 Mb
Hard Drives: C: Total - 463838 MB, Free - 265342 MB;
Motherboard: Gateway , ID59C , V1.05 , LXWLJ02009023BBCC42200
Antivirus: Bell Aliant Security Services Anti-Virus, Updated and Enabled

Okay, so over the holidays I received a brand new Hisense television and I was watching movies and tv shows on my laptop on the big screen through an HDMI cable for a few weeks. Before that I was doing the same thing with the big screen in our living room for months. I got up one day and wanted to plug it in but I kept getting a message saying no signal. I had had it plugged in the night before and it worked just fine. Yes, I checked to make sure it was on the right setting, HDMI 1. I also tried plugging it in the other HDMI slots on the tv and it didn't work in those either. It is doing the same thing to our tv in the living room and it just doesn't make any sense. The only thing I can think of is that my computer has some kind of driver that just needs to be updated or something but I have no idea which one. HELP PLEASE!
 

A:No signal message when laptop is connected to Hisense TV through HDMI cable!

7 more replies
Answer Match 65.1%

I have been using an HP Z display as an ext monitor, connected to my Pavilion 15 notebook using the hdmi port.  Following an update 2 days ago, the monitor no longer receives a signal from the hdmi port.  (I know the monitor and cable are ok as they work on another laptop). Any help or suggestions how to resolve this issue will be great!

More replies
Answer Match 65.1%

Hello,

My laptop's screen goes black when I connect it to the TV via a HDMI cable, however this is completely new as it used to work fine. I can still watch things on my TV but I have to look at the TV screen where text comes up quite small and it makes it hard to do stuff, so I was wondering if anyone would know why my laptop's decided to start doing this, and how I can get it back to both screens working at once? The volume and everything else works ok, it's just a bit annoying is all!

I have Windows Vista Home Edition, not sure of the details, but I got it just when Vista first came out.

Thanks!

A:Help needed: Laptop screen goes black when HDMI cable is connected

do you have your drivers set to "clone mode" in your CP? (the bit where you set up multiple displays

4 more replies
Answer Match 65.1%

I can't make this go away. I've thrown everything I can think of at it. AVG, Avast, McAfee stinger, Kaspersky rescue disk, Malwarebytes, Super Anti Spyware, CCleaner, Norton sassor worm remover, and Hijackthis and its still there. I've cleaned all temp and internet files, turned off system restore, still nothing. I cleared all event logs and this popped up and might be related. HELP!!!!!!!!!!!! Windows Vista. Memory tested good. A weird thing was I could not install Avast on the infected laptop I had to install in on my test machine and attach the hard drive to it. When install Avast on infected laptop it would not install and even when rebooting before uninstalling it I got the blue screen of death a few times. I also ran regvac, registry first aid.

Log Name: Application
Source: Application Error
Date: 8/19/2010 11:38:33 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Kai-Laptop
Description:
Faulting application services.exe, version 6.0.6002.18005, time stamp 0x49e01a51, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x004fff41, process id 0x228, application start time 0x01cb4031ca48b72c.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</... Read more

A:Laptop shuts down in 60 seconds when connected to internet

BTW. I have done so many google searches it's not funny. None of the things I read worked. AGAIN HELP!!!!!!!!!!!!!!!!!!!!
 

1 more replies
Answer Match 63.84%

Shows not plugged in when connected to my Denon receiver, but if I plug it in to my LG TV, it shows plugged in and does have audio. What gives?

More replies
Answer Match 63%

Hi,
I have a Dell Inspiron 15 laptop that is connected to 2 Dell monitors via a Targus docking station and VGA cables. However, when I close my laptop to sit under the monitors, it shuts down the computer and the screens go blank. Is there a setting that allows me to close the laptop while still working off the two monitors?
Thanks,
Heather

A:Closing Dell Inspiron 15 laptop when connected to monitors shuts down computer

Check your Power Settings for what happens when you close the lid. Usually the laptop sleeps, hibernates or shuts down when the lid is closed. No signal is sent to monitors when that happens.

1 more replies
Answer Match 57.12%

I want to play movies from my laptop on my HDTV (but it's ok if it's not HD). I looked and saw other topics posted about this, but my situation is different from those. Here's my problem:
My laptop has both an HDMI port and a VGA port, but no S-Video or composite.

My TV has an S-Video port and composite, but no HDMI or VGA.
How do I play movies from my laptop on my tv? I bought this adapter, but the composite cables didn't work, and the S-Video is female on this and the tv. Is my graphics card the problem? It's an ATI Radeon HD 550v. I'll lend more information if needed. Thanks for your help.
 

A:Laptop to Television help

6 more replies
Answer Match 57.12%

My son is off to Australia for a year and I gave him a Dell Latitude D600 with Windows Pro installed to take with him. He asked if he could get TV programs on the laptop so I,m asking what do I need in hardare and software to accomplish this? Also is the TV accessed through the internet or by a TV cable attached to the laptop?
 

A:Television On Laptop

7 more replies
Answer Match 56.7%

I hope I'm in the right area. I have a Toshiba L350-OOJ laptop that has a 15 pin VGA video output port. I would like to connect it to my television set which is a Panasonic CJ32XF36C model. It has 4 Video input (phone) type jacks, 8 rms Audio input jacks, and 2 S-Video input (Y-C) connectors. Is it possible to make a cable to connect the video outout of my laptop to the S-video in jack of my television set and use a separate cable to connect the audio portion from the earphone jack on the laptop to the audio input on the tv?I have tried various computer stores etc but nobody has such a cable. I do not have a VGA port on my TV.
Bruce
 

More replies
Answer Match 56.7%

Hello, I've been curious about hooking my laptop up to an older tv. I used to hook it up to my 19in directly using an HDMI to HDMI chord and that worked perfectly. Now I am recently using an older tv that has the three standard video, L-R inputs in the front. I was wondering how I could connect my laptop to it since my laptop only has an hdmi port and it also contains a VGA port. I was thinking maybe something laong these lines of this http://amzn.to/adLvFg, but im not certain this would work. I have looked at ones with s-video but they all have female ends and to go into my tv it would need the male ends. Any Help? Thanks in advance
 

A:Connecting My Laptop to my television

I have been looking around and it seems that this is not an option at all because my VGA port doesn't support ty out. it is a nvidia 9600M GT, is this correct?
 

2 more replies
Answer Match 56.7%

I need to know how to connect my laptop to my
television using windows 7 not the cords that i have
been seeing on the internet. if you could help me out
with that i would really love it!!

i have a Hp laptop and
a Philips Lcd television
 

A:connecting laptop to television

can we have the exact models

a few ways will be possible - depends on the outputs available on the HP - you may have any of the following
VGA (you will have this - and if the TV has a VGA input - use that)
S-Video
HDMI

then if you have any of these on the TV - you just need the cable
BUT if not
then you may need a convertor cable
Ie
VGA to Scart
VGA to Composite

But we need to know the Outputs available on the HP
and all the inputs available on the TV
 

1 more replies
Answer Match 56.7%

I have an HP dv8110us model laptop and it has an s-video cable output and im trying to hook it up to my television has an s video input. Well I connected them both while the laptop was still on and im not seeing any video. Would restarting the laptop work? Or do I have to handle this in the control panel? Im very confused and a good tutorial on how I could get this to work would be great.
 

A:Connecting laptop to my television.

Howdy Haborym...

I've got to ask this question ( no offense )...

But...did you change the Input on your TV ?

Most TV remotes have a Input button, you have to change the Input to which ever the S-Video channel is on...

It's either that, or you have to go into the BIOS and enable the S-Video connection ( or maybe there is a software switch that you have to enable, I'm not familiar with your laptop )...

Just wanting to clarify...
 

1 more replies
Answer Match 56.7%

I would like to watch movies that I have on my Laptop through my television. My laptop does not have an S-video port.... Any ideas?
 

A:Connecting a Laptop to a Television

8 more replies
Answer Match 55.86%

When I connect my HP Envy laptop (Windows 8.1) to my receiver via HDMI, the only sound I get is from the laptop, i.e., no sound from my receiver. The receiver has a front input for the laptop, and that's what I am using. So I know the connection to the receiver from the laptop is correct. The video from the laptop is displayed correctly on the tv. However, the only sound is on the laptop. There is no sound from my receiver. I understand a setting needs to be changed in Windows 8.1 to get HDMI sound output from my laptop. I just don't know where it is. What do I need to do in order to get HDMI sound output from my laptop?

Thanks ...

A:[SOLVED] No Sound From Laptop To Television

Nothing.
Sound is passed through HDMI without changing settings.
The issue may be the receiver does not support pass through.

3 more replies
Answer Match 55.86%

I recently bought a new 40 inch Samsung Lcd television, i tried connecting my laptop, which is running on vista to it via a VGA cable but when i go to the pc mode on the tv it says Mode not supported, then it will go into standby. i tried this using another computer running windows xp and it worked. do i need to install a driver for vista?

A:Connecting My Laptop To A Samsung Television

I suspect that the mode that your video card is running in isn't supported by the TV. Try setting the resolution to different higher values to see if it works. Try both regular screen and widescreen settings. There may be more info about this in your Samsung TV user guide.

To access the screen resolution, right click on an empty spot on the desktop and select "Personalize" - then click on Display Settings. If you try all of the resolutions available and still can't make it work - then try clicking on the Advanced button and then on the Monitor tab to adjust the Refresh rate lower.

2 more replies
Answer Match 55.86%

Dell latitude C840 laptop- trying to show digital pictures on televison with (S video ?) cable plugged into side of laptop at jack with a symbol that looks like a tv with rabbit ears and an arrow going through it. I've been told there is a Fn key to toggle the picture over to the television but I can find it. Tried the key with A/A and that did not work. I can get the Fn key to toggle on my number keypad ie. the i key becomes 5 when toggled with the Fn key. OS = XP Professional. Help!
 

A:view pics on television from laptop

IT guy gave me a tip. To view desktop on television with S video cable...
right click on desktop,properties,settings,advanced,nView,clone,ok,ok.
Fn + F8 to go back to LCD.
 

1 more replies
Answer Match 55.86%

I have a Gateway laptop that can transfer images to a television. I have done this before but after replacing a bad hard drive, I can not do it anymore. It appears that when I go to set up the connections between the laptop and the television a particular page does not show up which allows me to enable the TV. I have noticed that the ATI mobility radeon properties window (that is my graphics card) was model 9600. With the new hard drive replacement it is model 9700. I do not know if that is the cause. The page that is now missing allowed me to enable both the laptop monitor and the television. Can someone help me on this? I have an M675PRR Gateway laptop using XP Pro.

A:can't display movie to television from laptop

Hello

here is a link to the drivers for your system

http://game.amd.com/us-en/drivers_ca...xp/mobility-xp

make sure you go into the control pannel / then add & remove programs / & uninstall all the other drivers for ATI

before installing the new drivers

1 more replies
Answer Match 53.34%

Hello guys!

I recently ran into a problem with my main LCD TV(I need to replace the power supply.) I use that LCD TV for my desktop computer, and right now all I have is my laptop. I use synergy to control both computers. However now it doesn't matter because I cannot see the desktop portion. Is there anyway for me to output my desktop computer to my laptop monitor?

Both my Desktop and Laptop have HDMI input. I also have the HDMI cord on hand right now I just don't know how I'd go about setting it up. I'd like to use synergy to control the desktop AND have it's output be on the laptop until my power supply arrives and I can fix my TV.
 

A:Solved: Output Desktop HDMI to Laptop (which has HDMI input)

9 more replies
Answer Match 52.92%

Gateway Laptop M-151-X
ATI Raedon 2400 graphics card

I just got an HDMI over cat5 extender (HDMI from computer --> wall plate --> cat5 --> wall plate --> HDMI --> Receiver), got it? I plug the HDMI cable into the laptop and it turns off... immediately, like I pulled the battery and power out.

I connected the computer directly (HDMI from computer --> Receiver) and it worked just fine.

I connected my PS3 through HDMI-->cat5 and it worked fine too.

I've updated the ATI drivers, downloaded the new catalyst center for windows 7. Anyone got any ideas?

A:HDMI shuts off computer

  
Quote: Originally Posted by hifismith


Gateway Laptop M-151-X
ATI Raedon 2400 graphics card

I just got an HDMI over cat5 extender (HDMI from computer --> wall plate --> cat5 --> wall plate --> HDMI --> Receiver), got it? I plug the HDMI cable into the laptop and it turns off... immediately, like I pulled the battery and power out.

I connected the computer directly (HDMI from computer --> Receiver) and it worked just fine.

I connected my PS3 through HDMI-->cat5 and it worked fine too.

I've updated the ATI drivers, downloaded the new catalyst center for windows 7. Anyone got any ideas?


I dont think its this simple but. Cat5 is basically 4 conductors. Cat6 is 10 maybe 2 of the the four used connectors act like a ground? does the manual specify cat5?

Ken

9 more replies
Answer Match 52.92%

Hi there all every time i try to conect my labtop to my new lcd tv which is a sharp aquos it shuts down my labtop yet when i took it back to pc world they tried it on a different model in there shop it worked first time can any one tell me why or how to fix this problem?
 

More replies
Answer Match 52.5%

I have Quadro DVD-922 connected with HDTV via HDMI.

Video output is set to HD, but when I try to play an HD file - it doesn't work.

What should I do to be able to play HD videos?
 

More replies
Answer Match 52.5%

I have a HP Pavilion dv4-1435dx laptop. TV is Dynex LCD (one of those no name brand ones ) I checked the drivers on the laptop, they all seem to be up to date. However when I go to Control panel-Sound-Manage audio devices, there is no icon with an HDMI label to select for playback device. How do I add the driver for HDMI (to select)?

I have scanned (and tried) numerous suggestions on this type of a problem on different sites on the web (including this one, under a different thread)

Any suggestions, other than try a new cable?
Thank you in advance.

A:No audio When PC connected to TV by HDMI

Welcome to SevenForums.

In Sounds / Playback make sure it is not disabled and hidden.
Rt click on the Sounds / Playback window to make sure "Show Disabled Devices" is checked.

If it is not there open Device Manager to see if is listed and there are no errors.
You can open Device Manger from Start/Search

3 more replies
Answer Match 52.5%

Hello everyone!

First of all i would like to thank everyone for the answers and help you share and i am new to this forum. I tried to search before making this thread but i havent found any answer that could help me.

I just bought 2 LCD monitors ( Acer and Asus) they all work perfectly But i have a problem, a huge one. The Asus monitor refuses to work when the VGA (acer) is connected and vice versa.

The Asus is a 23" LCD monitor, its connected via HDMI.
The Acer is a 18,5" LCD monitor, its connected via VGA.
My laptop is an Acer 7736, 2,20 GHZ, 4 GB RAM, 1GB graphic card from ATI Radeon.
So i beg you please to help me, i have tried everything possible, been trying for the last 7 hours and i even downloaded Ultramon but it doenst work either.

I only want them to work in same time, what can i do?

Here is the link, i even tried updating the drivers on the graphic card but nothing works.
Thanks in advance!!!

A:HDMI trouble when VGA connected

A lot of laptops do not have the ability to go to more than two monitors (Edit: this is including laptop as monitor). You can probably have both work if you close your laptop lid, otherwise, only the laptop and VGA or laptop and HDMI will work. (Edit: if you close laptop lid, the two monitors VGA and HDMI will work but only with laptop monitor closed)

I think there is a piece of hardware you can purchase that can turn a USB port into and external display adapter, but I don't know if it was GFX card specific or if your card needs or supports a particular piece.

My laptop suffers from this as well. I tried it and confirmed it after seeing issue on this forum a few weeks ago.

9 more replies
Answer Match 52.5%

hello 
when i connect my TV ( samsung) with HDMI to my Sony vaio i can not play the audio on the TV( after i commute to AV- HDMI ) 
only after i reboot my laptop with the HDMI connected. 
after that i can play a movie with audio on TV. 

can u tell me why ? 
i run Win 8.1

thank you 
Alex 

More replies
Answer Match 52.5%

First of all sorry if it's not that Windows related!
So the problem is that my LCD TV has a scrambled picture when my computer is turned on and connected to the TV via HDMI. I got analog signal TV connection but the picture is fine while the PC is turned off. Yeah I know I should get digi TV but till then I would like to sort this out. The TV is a Samsung 40" LCD model LE40A336. It has 2 HDMI input ports. Tryed both with same results. BTW if I remember it right, I had the PC connected via VGA last weekend and didn't have this problem. I will double check it in the morning.
Maybe I'm using wrong setting with PC... wrong Hz or sth. Anyhow maybe someone has had similar problems and solved it.
PC:
GTX 470 DVI->HDMI
i5 2500K
Windows 7 x64
EDIT: The TV is the only monitor connected to the PC via HDMI. Sound is passing through the HDMI cable aswell.

A:TV scrambled while PC is connected via HDMI

  
Quote: Originally Posted by karelo


First of all sorry if it's not that Windows related!
So the problem is that my LCD TV has a scrambled picture when my computer is turned on and connected to the TV via HDMI. I got analog signal TV connection but the picture is fine while the PC is turned off. Yeah I know I should get digi TV but till then I would like to sort this out. The TV is a Samsung 40" LCD model LE40A336. It has 2 HDMI input ports. Tryed both with same results. BTW if I remember it right, I had the PC connected via VGA last weekend and didn't have this problem. I will double check it in the morning.
Maybe I'm using wrong setting with PC... wrong Hz or sth. Anyhow maybe someone has had similar problems and solved it.
PC:
GTX 470 DVI->HDMI
i5 2500K
Windows 7 x64
EDIT: The TV is the only monitor connected to the PC via HDMI. Sound is passing through the HDMI cable aswell.


the VGA doesn't transfer data signals through digital technology, it uses analog, that's why the picture appears correct on the VGA, the HDMi though uses a technology called HDCP handshaking, the PC needs to handshake the display for it to show the images being encrypted from the desktop, if that handshake doesn't take place then the image will appear scrambled.

you can read up about HDCP here High-bandwidth Digital Content Protection - Wikipedia, the free encyclopedia but your options are just to use the VGA cable, or if it is a software fault then ... Read more

6 more replies
Answer Match 52.5%

I just connected my VIORE hdmi to my new PC with Win 7 Ati Radeon graphics and my screen picture is bigger than the display. Icons are cut in half on the left, cannot see start or time on the bottom or left or right. Display section calls it a CV TV15

how do I adjust the screen logical to fit the screen physical. This is the 1st monitor I have had that did not have buttons do do this
 

A:VIORE HDMI WIN 7I just connected my VIORE hdmi to my new PC with Win 7 Ati Radeon gra

You need to adjust the graphics settings for the correct resolution for the TV.
 

2 more replies
Answer Match 52.08%

AT first i thought my Graphics card was failing so i unplugged it and hook to the vga on my onboard graphics of my 8200 MOBO XFX.... No problems for Hours... So I hook it to my 52inch Sharp Aquos using a dvi-hdmi adapter.... Run it at 720 for hours.... No problem.. So im like damn my graphics is going... But then i put the settings to 1080p and 10 minutes later it shuts down as if it were overheating... But its barely capping at 65celcius So thats not it... I hook my 9800GT OC-SC run it at 720P at minimum clock settings no problems for hours running 80-120fps on my game... So i switch to 1080p still running around 70-90 fps and the GPU is at 63celcius... 10 minutes later it shuts down like i just pulled the cord or like its overheating... (Which it is not)

Specs:
500watt Ultra PSU
Cooler Liquid Cooled 1-3 coolant solution...
5 120mm Fans X-Dream Case (flows amazingly)
3 80mm Fans for exhuast 2 Rear one front
XFX 8200 2.88ghz-x4 Proc 1gb Ram
9800GT Superclocked 512ddr3

Its not hardware for sure at this point so has anyone found fixes to this or am i pretty much stuck at 720 on massive tv's?

Also It doesnt shut off if I take off the side panel and run 1080p with a Massive fan... Wierd huh? VGA Runs fine at 1920-1050 any help would be greatly appreciated...

Also to add i have a GTS 250 Overclocked 1gb ddr3 on its way because i was impatient and thought my graphics card went... any how im upgrading to this soon but i want to know why it would be doing this... Im h... Read more

A:HDMI 1080p Shuts off computer (please help)

Don't know for sure - but what kind of HDMI cable are you using?
What kind of DVI adapter? DVI-I? DVI-D?

The reason I ask is:
A few years ago, HDCP was introduced. It's a hardware-level copy protection method.
This prohibits devices from operating at 1080p if both the source and the viewer are not HDCP compliant. Even the cable connecting the devices has to be HDCP-capable.


I do not know for sure if this is problem - but I would place my bets on either your HDMI cable or DVI-HDMI converter causing the issue.

4 more replies
Answer Match 52.08%

Hello, I just bought an HDMI cable to connect from my HP Pavilion x360 onto my TV. Unfortunately, I only get video on my TV but no audio. The audio only comes from my Pavilion x360. I am aware of right clicking the volume icon and clicking on "playback devices" to set defult the HDMI cable or TV. Unfortunaly, this is not visible even after enabling the disconnected and disabled devices. Please, anyone help so I can get the audio on my TV as well? I've let a screenshot. As a reminder, my HDMI is connected on both sides, and I have both disconnected and disabled devices visible. Thank you!

More replies
Answer Match 52.08%

Hi, I was wondering if someone can help me.

I updated to windows 10 some months ago and realized my beats audio panel was gone. I few day back I re installed the High Definition Audio Device drivers and beats audio seems to came back.

I recently bought a denon amplifier and noticed very low sound when I connect the notebook to the amplifier through hdmi.
Is the hdmi sending the wrong signal? are there any new drivers for hdmi controllers or realtek sound card?
My laptop is a HP envy 17 j011nr (i think so) core i5 beats audio
Thanks a lot in advance!!!

A:Low sound when connected to amplifier through hdmi

Realtek shouldn't even be involved with the HDMI sound. I suggest to update your laptop's drivers and use "Intel Display Audio" as your HDMI driver. Set the volume to max then you're good to go.

2 more replies
Answer Match 52.08%

Today my notebook Asus M50Vn suddenly started to behave weird. While it's connected to plasma via HDMI, everything starts to stutter a bit, which is very inconvenient in videos. It works like this: 0,5 s of fluid picture, 0,1 s of freeze, 0,5 s of fluid picture, and so on.

Situation is the same on primary (built-in) monitor and secondary (plasma), as well as on youtube, VLC, PotPlayer and MPC HC. DXVA and CUDA won't make any difference, choosing different video renders in player's settings won't do the help as well. I've already tried to install older and newer drivers (graphics is Geforce 9650m GT) but it didn't help.

Computer is 100 % virus free, there is COMODO IS for on-access security and I've also checked it with malwarebytes, hitman pro, emsisoft emergency kit, kaspersky tdss killer and CCE. Almost all processes are disabled.

It's interesting because there's no problems when plasma is connected via VGA.

Unfortunately there's no useful system restore points.

Does anybody have any idea what could be wrong? Thanks in advance.

A:Notebook Is Slow While Connected To HDMI

Well normally I'd have said it was just your laptop struggling to upscale the image due to hardware limitations. But a 9650gt should be more than capable.
What happens if you disable the laptop screen and just use the tv as a primary monitor?

Erm.. Try a different HDMI lead and lower the resolution a little. But that's clutching at straws lol

5 more replies
Answer Match 52.08%

Today my notebook Asus M50Vn suddenly started to behave weird. While it's connected to plasma via HDMI, everything starts to stutter a bit, which is very inconvenient in videos. It works like this: 0,5 s of fluid picture, 0,1 s of freeze, 0,5 s of fluid picture, and so on.

Situation is the same on primary (built-in) monitor and secondary (plasma), as well as on youtube, VLC, PotPlayer and MPC HC. DXVA and CUDA won't make any difference, choosing different video renders in player's settings won't do the help as well. I've already tried to install older and newer drivers (graphics is Geforce 9650m GT) but it didn't help.

Computer is 100 % virus free, there is COMODO IS for on-access security and I've also checked it with malwarebytes, hitman pro, emsisoft emergency kit, kaspersky tdss killer and CCE. Almost all processes are disabled.

It's interesting because there's no problems when plasma is connected via VGA.

Unfortunately there's no useful system restore points.

Does anybody have any idea what could be wrong? Thanks in advance.
 

More replies
Answer Match 52.08%

Hi folks, so I got a new pc and connected it to my LG 42LV550T using a DVI to HDMI and 3.5mm from line out (and tried headphone socket) to the 3.5mm audio in (RGB/DVI) socket on the TV but I don't get any sound on the TV.
I connected the PC to my stereo using the line out and headphones socket with 3.5mm to stereo/phono plugs and I get sound, but I would like the sound through the TV and then the TV connected to my stereo for better sound all round.

I know DVI doesn't carry sound.

I had a chat on LG support with no help

Any ideas ?

PC specs.
OS Version: Microsoft Windows 8, 64 bit
Processor: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 8082 Mb
Graphics Card: Intel(R) HD Graphics, -1984 Mb
Hard Drives: C: Total - 953516 MB, Free - 897064 MB;
Motherboard: Gigabyte Technology Co., Ltd., H61MA-D3V
Antivirus: Windows Defender, Disabled

Thanks TechnicalH1
 

A:DVI to HDMI and 3.5mm audio connected but no sound

16 more replies
Answer Match 52.08%

I get no sound when I connect my hdmi monitor my laptop

My monitor has no sound

How do I keep the sound on my laptop?

Thanks
OM
 

A:No sound when hdmi monitor connected

Try clicking the speaker icon in the lower right corner of your monitor, click playback devices, your monitor should be listed there and you need to set it as default.
 

3 more replies
Answer Match 52.08%

Hi,
I just did a fresh install of Win 8.1 last week and my TV which is connected via HDMI is not getting detected as a display on my PC. My monitor was detected fine.

When i right click my desktop and go to screen resolution, the TV doesnt show up there even post clicking detect. Same if i go into AMD CCC and click on detect.

However Win 8.1 can detect it. The TV is seen in device manager under digital media device and i can see the TV under Devices and Printers in Control Panel. I've tried troubleshooting it but it says everything is fine.
But I need it to come up as a display so i can use it as a primary display at times or to duplicate display.

I had no such problems with Win 7. It would detect right off the bat.

Things ive tried:-
I've installed the Omega 14.12 drivers and the Beta 15.4 drivers.
I've tried installing them in Win 7 compatibility mode too, but the installer then wouldnt give me the option to install the display driver and the HDMI audio driver.

One thing i notice is that the driver for the TV is provided by Microsoft and the date of the driver is 6/21/2006! So maybe this needs to be updated. I tried to click on update driver but it says my driver is up to date.

I also have all the latest windows updates installed.

so not sure what else to do here.

Please help.

A:Win 8.1 - TV connected via HDMI not detected as a Display

The 2006 device driver is simply the generic one which is normal, same one I get when TV is plugged in.
What HDMI port are you using? One on motherboard or one coming directly from GPU? This almost has to be a graphics driver problem.
Why would you try installing drivers in 7 compatibility mode? We are talking 8.1 here right? Have you tried drivers from manufacturers site?
A laptop or desktop? Motherboard and GPU make/model?
So, so many details you've left out.
Would help to have some system specs.

5 more replies
Answer Match 52.08%

Hey guys,

I'd really appreciate your expert assistance!

I've got an Origin Eon-17 SLX laptop that has recently gone out of warranty. I'm getting very frequent BSODs on start up, and it seems to happen almost every time if I have something connected to the HDMI output. It usually will BSOD, then restart fine.

I've tried a fresh install of 8.1, to no avail.

Please find the logs attached.

Many, many thank yous in advance!

A:BSOD often on start up, especially with HDMI connected

Hi mkbcnr33 & welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Thu Apr 9 03:42:31.874 2015 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\040915-4734-01.dmp]

Windows 8 Kernel Version 9600 MP (8 procs) Free x64

Built by: 9600.17668.amd64fre.winblue_r8.150127-1500

System Uptime: 0 days 11:14:33.575

Probably caused by : ntkrnlmp.exe ( nt!KiFastFailDispatch+d0 )

BugCheck 139, {3, ffffd000248f7500, ffffd000248f7458, 0}
BugCheck Info: KERNEL_SECURITY_CHECK_FAILURE (139)

Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd000248f7500, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd000248f7458, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
BUGCHECK_STR: 0x139

DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x139_3_nt!KiFastFailDispatch

CPUID: "Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz"

MaxSpeed: 2700

CurrentSpeed: 2694

BIOS Version 4.6.5

BIOS Release Date 02/14/2014

Manufacturer Notebook

Product Name P17SM-A

?????????????????????????????????????????????????????????????????????... Read more

3 more replies
Answer Match 52.08%

Hi, I was wondering if someone can help me. I updated to windows 10 some months ago and realized my beats audio panel was gone. I few day back I re installed the High Definition Audio Device drivers and beats audio seems to came back. I recently bought a denon amplifier and noticed very low sound when I connect the notebook to the amplifier through hdmi.Is the hdmi sending the wrong signal? are there any new drivers for hdmi controllers or realtek sound card? Thanks a lot in advance!!!

More replies
Answer Match 52.08%

Nothing is showing up on the TV. I selected the Extended screen option & nothing. I looked in Display Settings & no second screen is being detected. Even though on the TV itself. It reads that a HDMI is connected to the specific HDMI port. Windows 10 says my Drivers are all updated & my Displey Driver is AMD Radeon R7 200 Series

A:HDMI connected to Monitor & the other end connted to TV

If the title of your post is accurate.....then that will never work. You have to connect the TV to the PC with an HDMI cable and then do the same thing for the monitor. You need 2 cables. No other way around it.

3 more replies
Answer Match 52.08%

Hi everyone, I just got a new sound bar (Yamaha YAS-105) which only supports Dolby Digital 5.1 (AC3, I think) and I want it to smoothly transcode all of my DTS or newer audio to a multi stream AC3 in both MPC player from the latest K-lite mega pack, VLC and Winamp, or rather, if possible, just in general. If I play something thats DD5.1 in K-Lite's MPC it neatly picks up the audio and displays it as DD on my sound bar, same thing goes for DD5.1 in VLC etc. but as soon as I play something in DTS or higher there is no audio. I've been googling and tweaking the settings already and after messing around a bit it does play sound through MPC but none of my Dolby lights light up on my device and it doesn't sound like 5.1 either, the weird thing is that no lights go on, not even the PCM light just the TV light is connected and it gives a sort of stereo with subwoover sound (so 2.1). If anyone can help me out I'd be very grateful, I know it's possible because it works with media boxes as well, I just can't get it to work on windows... Any extra info, I have an Alienware X51 RC1, Soundbar is a Yamaha YAS-105, like I said it's hooked up via HDMI to my TV and my TV through a Digital optical cable to my soundbar.

More replies
Answer Match 52.08%

Hey guys,
I updated my windows 7 acer to windows 10 while i was connected to my tv screen via hdmi... but now my screen doesnt show up on my laptop at all. It only shows up once i connect my laptop to my tv via hdmi... so i cant actually use my laptop without my tv screen which is difficult while trying to study... i am desperate to get this fixed... if anyone has any ideas please let me know

More replies
Answer Match 52.08%

I wish to connect the HDMI to a video projector and the audio port to a sound mixing desk. Either audio or video works fine alone but when both cables connected am getting high-pitched feedback into the sound system. I have tried disabling HDMI as an audio device but it makes no difference. Have tried more than one HDMI and audio cable - same result.  

More replies
Answer Match 52.08%

Hi I have a strange problem with my b540p Ideacentre. If istart the computer without an hdmi cable connected, the screen just doesn't start, it never turns on. However, if I turn of the computer, plug in an hdmi cable in the out port, and start it works (regardless of wether or not the hhdmi cable is connected to anything. What is the deal with this, and how do I fix it?

A:B540p Only starts if HDMI is connected

I have the same problem.  I was connect to LG tv from hdmi out and now I can't turn on my computer without disconnect hdmi. I've tried set from screen resolution and set to 'show desktop only on 2' and when i disconnect and restart then there is blank screen, but when i connect hdmi then it work.  Please help.

3 more replies
Answer Match 52.08%

Today my notebook Asus M50Vn suddenly started to behave weird. While it's connected to plasma via HDMI, everything starts to stutter a bit, which is very inconvenient in videos. It works like this: 0,5 s of fluid picture, 0,1 s of freeze, 0,5 s of fluid picture, and so on.

Situation is the same on primary (built-in) monitor and secondary (plasma), as well as on youtube, VLC, PotPlayer and MPC HC. DXVA and CUDA won't make any difference, choosing different video renders in player's settings won't do the help as well. I've already tried to install older and newer drivers (graphics is Geforce 9650m GT) but it didn't help.

Computer is 100 % virus free, there is COMODO IS for on-access security and I've also checked it with malwarebytes, hitman pro, emsisoft emergency kit, kaspersky tdss killer and CCE. Almost all processes are disabled.

It's interesting because there's no problems when plasma is connected via VGA.

Unfortunately there's no useful system restore points.

Does anybody have any idea what could be wrong? Thanks in advance.

More replies
Answer Match 52.08%

Decided to run this old laptop to my TV so that I could watch shows from online. When I connected using an HDMI cable the sound cuts in and out very bad. Thought the cable might be bad so I switched it out for a new high dollar cable but still has the same problem. Issue occurs both streaming and when testing using system sounds (such as "test" in the sound setup in device manager). Running Windows 10 (64-bit) and have installed all system updates and have tried updating the audio driver but it is saying I have the most up to date driver. Any help would be greatly appreciated.

More replies
Answer Match 52.08%

Hi.  Last week and prior mths HDMI connection worked, TV had sound.  This weekend, 8-20-16, TV sound went away but still had video.  Looked at forums, utube and did the control panel sound device manager.  the Digital Display Audio-AMD High Definition Audio Device; not plugged in is grayed out.  clicked on it to no avail.  the set default is also grayed out so i cant even set a default.  PC speakers do work.  bought a new HDMI cable but no change.  all the drivers are up to date.  not really sure what happened.  worked for months and now no sound.  any idea????

More replies
Answer Match 51.24%

I've had my laptop for a while, and I've used my TV Screen as a secondary monitor a lot. A while ago my computer updated to windows 8.1 when I fell asleep on it and accidentally hit the update button when it came up (oops), making me have to use windows 8.1 now. Now I haven't had many problems with it, it works fine and dandy, but I do have a major problem when I try to use my second monitor. When I run a game or movie on it, the audio comes out from the laptop speakers, not the TV speakers. Previously, using windows 8, it would let me use both.

I know that if you go into the control panel and the sound systems that it should show two speakers, but for me it isn't. I've tried lots of different things and browsed the web for an answer, but I can't find anything.
Screenshot of my playback devices window:

If anyone knows how to get this to work, it'd be a big help!

A:HDMI connected second momitor not playing audio

According to your screen shot, you only have the PC audio (RealTek) and no HDMI audio. Reinstall the drivers for your video and see if that restores the HDMI audio.

No PC info posted, please fill in the "My System Specs". Helps us to try and help you.

I have both HDMI and PC audio on my Win 8.1 machines so it should work for you, if the PC is fully compatible.

1 more replies
Answer Match 51.24%

I used to be able to connect my r11 to the TV and get sound.  For some reason, this has now stopped.  I have been through all the forums and tried various options to no avail. All help gratefully received.

More replies
Answer Match 51.24%

I have a brand new MSI Media Live box. The Installation process went fine except when it came to startup after installation. I always receive a blue screen and sometime I have the "irql_not_less_or_equal" message. The system works perfectly when I startup using the VGA connector. I have verified that HDMI does work if I startup using the VGA connector and then extend the desktop.

I have downloaded and install the Windows 7 driver from Nvidia. My card is Geforce 6150. The error descriped above happened using my Philips Tv and also my computer LCD screen.

Any Ideas?

A:Blue screen if startup with HDMI connected

If I remove the HDMI cable from the computer while it is starting up and plug it in again when the login screen has appeared then this works without problems. Also works when starting up from hibernation.

9 more replies
Answer Match 51.24%

My headphone jack is busted, so I bought an HDMI to 3.5mm adapter so I could use my headphones that way. However, I can't get the laptop to send audio over HDMI because it doesn't think there's any device to receive that audio. How can I get Windows to route audio that way anyway? Everything I find is the opposite problem, where someone has a device plugged in and recognized but can't send audio to it.
OS: Windows 7
Model: Dell Inspiron 15r Special Edition
Processor: Intel Core i7-3612QM CPU @ 2.10GHz 2.10GHz
Graphics card: AMD Radeon HD 7730M
Adapter: click here

More replies
Answer Match 51.24%

I have connected my XPS L502X laptop to my Samsung lcd tv using an hdmi cable.
I do not have clone display as an option. I can only extend the display. My guess is that this has to do with the tv display being run from the nvidia graphics card and the laptop display being run from the integrated graphics. 
I am running Processor    Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 2001 Mhz, 4 Core(s), 8 Logical Processor(s)OS Name    Microsoft Windows 7 Home PremiumInstalled Physical Memory (RAM)    6.00 GB
I have updated to the latest bios and the latest drivers for the integrated and the nvidia graphics.
Is there anything I can do to see the same display on my laptop and my tv?
Thanks in advance for any help.

A:How do I clone display on XPS L502X - connected to TV by HDMI

Geekeleh
I certainly suggest making sure that you have the most up to date video driver.  The latest Dell drivers may be found from the following link.
http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=XPS_L502X&os=W764&osl=en&catid=&impid=
You may want to creat an Optimus profile for your applications to ensure that the NVIDIA GPU is being used over the integrated Intel solution.
To create a new profile for an application:

1. Open the NVIDIA Control Panel.
2. Select Manage 3D Settings.
3. Select Program Settings tab
4. Click Add button.
5. Browse to and select the application executable that needs the new profile.
6. Or choose the preferred application from the drop menu.
7. Select the features and settings you wish to change for this application.

Don't forget the basics, try another display if possible and see if the problem continues.  Try another HDMI cable to make sure that the cable is alright. \
Please, let me know what you find out.
 
TB 

33 more replies
Answer Match 51.24%

System has two HDMI ports and one DVI. The DVI supports a monitor and HDMI is advertised as supporting two monitors. Neither of the HDMI ports are working. Contacted HP support and was told to return for warranty work (1 day old tower). Returned to store for replacement contacted HP support with second tower and was told same, return for warranty work. Contacted online support from another company went through several operations, drivers different connections, both monitor and TV and finally was told tower #2 was also defective. HP Envy 750-197c windows 10

A:Dual monitors not working when connected to HDMI

Hello @77-77-77,I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.If you are unfamiliar with how the Forum's private message capability works,this post has instructions. Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great weekend!

1 more replies
Answer Match 51.24%

I fought this problem all day and I think I have it narrowed down. System is Lenovo Yoga 900 i7 with Windows 10 with all latest updates. Application is Citrix Receiver 4.5. When using Quickbooks with the Citrix Receiver, mouse clicks are disabled/not recognized.  All keyboard inputs still work, the mouse arrow tracks correctly, but mouse clicks seem to be ignored.  This behavior occurs when booting to dual monitor setup with HDMI adapter in the USB Type-C port; booting to single monitor (Yoga), then plugging the HDMIR adapter in the USB Type-C port.  The only resolution is to boot to single monitor (Yoga) and work in single monitor mode exclusively.  I am using the USB Type-C to HDMI adaptor purchased from Lenovo.  This occurs with the Yoga trackpad AND occurs with my USB wireless mouse. Also note with native Windows applications, the mouse works fine with both  monitors connected and active. I really bought the HDMI adaptor to use two monitor with the Citrix Receiver.  I have tried to Google this problem, but I'm unable to find a Citrix Receiver support site/forum that would be appropriate for this question. Any advice appreciated.

More replies
Answer Match 51.24%

Hello, I built my new computer about a week ago and was running it off a single 19" Tevion TV while I waited for the HDMI cables to arrive so I could setup my second monitor.

They arrived yesterday and when I plugged in my 32" JVC LT-32DA30J there was overscanning and the bluriness. I fixed the overscanning in the TV's menu and now the size is correct but even at native resolution, the JVC monitor is still quite blurry and is a strain to look at and concentrate on.

Plugging the HDMI cable into my Tevion monitor made that go blurry as well so it could be the HDMI cable or the motherboard ports (when I first got the PC, the VGA port had the same problem but once updated it looked normal)

Does anyone know of a fix to this ? Or can at least suggest what part is going wrong so I can try and fix it ?

What I have tried:
Changing the resolution - all the different resolutions all show the same blurriness
Changing the refresh rate - problem persists through all refresh rates
Changing monitor settings - As above, changing these settings didn't help with anything

Any help is very appreciated , I've been trying to fix this problem for most of yesterday

A:HDMI connected monitor is blurry and seems out of focus

you dont seem to have changed the 2 most important things!!

1) update the display/gpu drivers.
2) change the hdmi cable.

if neither results in it working then report back!

9 more replies
Answer Match 51.24%

Hi! I have this monitor http://www.newegg.com/Product/Product.aspx?Item=N82E16824014146

and this cable

http://www.newegg.com/Product/Product.aspx?Item=N82E16812226013

Connected to a normal TV and HDMI to DVI cable to my lcd monitor at the same time it gave me an option at startup to switch to my HDMI source, but when I did all I saw was black on the LCD screen.

I was able to go into Display settings and switch it to HDMI manually but when it swaps to my lcd monitor its nothing but black again!

Do HDMI to DVI cables work for PS3s? My lcd monitor does not have a HDMI plug in. Only VGA and DVI

I'm hoping theres a trick to get this working or at the very least an adapter that wouldn't degrade the quality as much.
 

A:Playstation 3 and HDMI to DVI Cable connected to LCD Monitor

oh nvm my monitor dosent support high def outputs =\
 

2 more replies
Answer Match 51.24%

Hi there;

I recently got a lenovo z710 ideapad to replace my previous laptop and serve as a substantial increase in gaming potential. I usually game with my computer connected to an lcd tv with an hdmi cord. However, with the new laptop I am having incredibly constant BSOD issues.

The BSOD has specifically occurred in Bioshock: Infinite and Deus Ex: HR (I have not yet tested any other games significantly). I am normally able to play fine for some time, however after gaming for a variable amount of time my computer blue screens after trying to load a new map or level (either by fast travelling, moving from one map to another, or just from loading a savegame).

In the case of Deus Ex, I can quickly and reliably produce the error, if I run the game and load a save, then quit to desktop and repeat, the BSOD will occur within 2-3 cycles. There was no problem when running the game while not connected to my tv, even after 10 or so cycles.

So far, I've tried the following based on what I could find on the net:
-Verified integrity of the affected games
-re-download affected games
-search error codes on Microsoft's website (no luck)
-Used the Windows ErrorChecking tool to check for hard disk errors
-Complete un-installation of NVidia drivers and safe-mode wipe using Display-Driver-Uninstaller tool

Nothing seems to have any affect. I think (hope) it's a software issue, as the computer did originally come with Windows 8, which I removed and replaced with the Windows 7 ... Read more

A:BSOD while gaming on tv connected via hdmi; nvlddmkm.sys

From the sounds of it, you have a problem with your graphics card, and because it's a laptop it sounds like an overheating issue. You have a bugcheck of 0x116 which is a video tdr error which is generally caused by a faulty graphics card. Download Speccy to monitor your temperatures. Then post a screenshot here.

Speccy - System Information - Free Download

Then can you please run a stress test with furmark by following these instructions.

Video Card - Stress Test with Furmark


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa800ec49010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff8800637e694, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.

Code:
fffff880`079eca48 fffff880`044bb140 : 00000000`00000116 fffffa80`0ec49010 fffff880`0637e694 ffffffff`c000009a : nt!KeBugCheckEx
fffff880`079eca50 f... Read more

9 more replies
Answer Match 51.24%

I have an external monitor with no speakers I use as a dual display along with my laptop monitor. No sound comes out of my laptop speakers nor when I hook up external speakers to it while I have the external monitor hooked up by the HDMI cable. Is there anything I can do to get this to work?
Thanks,
Bill

A:HDMI monitor no speakers-no sound from anywhere when connected?

Right click on the volume control and then Properties,

When you connect the HDMI it becomes the default output device, even though it has no speakers.

You need to change this back to "Speakers" and set as default.

5 more replies
Answer Match 51.24%

www.sevenforums.com/sound-audio/228558-hdmi-sound-output-problems-2.html

Dear Experts

I am using windows 7 64 bit on my desktop (motherboard ASUS P5E)
ASUS - Motherboards- ASUS P5E

And I installed VGA SAPPHIRE HD 3870 (ATI RADEON Technology) 512 MB.
This VGA has a converter plug from DVI to HDMI.

Connected a 3 m HDMI cable from a converter to the Samsung TV.

I can see a picture on the TV but no sound

What I did for troubleshooting

1- download latest driver from AMD website from the link below :
AMD Catalyst
2- Follow the instructions here :
How to Set Up Audio on an ATI Radeon HD | eHow.com

No audio from HDTV when playing audio / video from a computer system

3- Digital Audio (HDMI) option was grayed out (not clickable) as can be seen in the snapshot below :

http://i46.tinypic.com/2d10aba.jpg

A:SAPPHIRE HD 3879 connected to TV via HDMI no sound

What is a Sapphire HD 3879? I can't find that model. I see a Sapphire HD 3870, is that what you mean?

Regardless, you aren't getting audio because DVI doesn't carry audio, so converting from DVI to HDMI won't give you audio.

8 more replies
Answer Match 51.24%

Been trying to figure out a problem with HDMI audio out and "not plugged in error"

HW is a motherboard with HD3200 and ALC889A HD with latest drivers.

Using a HDMI cable i get HDMI audio out, but if i switch inputs on the receiver then back HDMI audio is "not plugged in".

changing resolution brings it back as default device.

Tested a backed up vista image with ati 9.04 and realtek hdmi 2.23 drivers and it worked fine changing inputs on the receiver.

The same drivers in win7 did not resolve the issue, so im guessing theres something in win 7 that causes this

A:win7 bug with HDMI audio connected to receiver

if you have an HDMI capable receiver I am going to assume you have at least a 5.1 setup correct? And I am also going to assume that "HW is a motherboard with HD3200" means onbaord HD3200?

If yes then I would suggest using either the coaxial output or optical S/PDIF output to the receiver as you are not reciveing 8 channel LPCM through HDMI.

As to your actual problem I am setup same as you, however I am not having that problem... is video still able to pass through to your TV even in the audio not plugged in state?

7 more replies
Answer Match 51.24%

Hello, I am weighing up my options between purchasing an Ideapad 500s or a Thinkpad L460. I do a bit of video editing, and when I'm doing that kind of work I want to hook the laptop up to a 4k screen, (the extra pixels allow a much more efficient workflow). To connect to a 4k monitor at 60Hz I have read that I need a DisplayPort output (which I note that the 500s does not have), or an HDMI 2.0. I suspect that the Ideapad 500s does not have an HDMI 2.0 output, but I would be happy to be contradicted. Could someone please confirm this one way or ther other? Preferably if you could point me to some official documentation about the product which answers the question that would be great! If it does have an HDMI 2.0, I wonder if anyone has any idea how the nVidia chip would handle the 4k screen. I wouldn't be gaming or even doing and 3d modelling or rendering - just some HD video editing - so I expect it would be fine? Many thanks,Tom

More replies
Answer Match 51.24%

I recently found out that every time i plug in a HDMI or Auxiliary cable, my computer crash. I tried changing the cable to see if that was the problem and it wasn't. I just don't know where to look to start fixing the problem. I've considered that maybe the connector is faulty, but i'm looking for option before going to that.

I use HDMI to connect my TV for movies
I use the auxiliary Cable to connect a speaker.
on different occasion.

A:Computer crashes after HDMI/Aux cable is connected

Did you try shutting the computer down, plugging in the cable then starting back up? I've crashed a computer when plugging in a USB Thumb/Flash drive, turned out it was caused by static electricity that I'd built up walking across a carpeted room, now have anti-static touch pads on my desks to touch before anything else.

3 more replies
Answer Match 51.24%

Thanks for the update today Dell!
Been using my XPS 13 (9350) on 40" 4K monitor on TB15 dock and HDMI for a while at 30 Hz. Today, installed the updated video driver (2016-09-07) and got 50 Hz working with Plugable adapter! So, no need for the TB15 until it can also support 50 Hz or better
My setup:
Dell XPS 13 (9350) with latest drivers
PLUGABLE USB 3.1 TYPE-C TO HDMI 2.0 ADAPTER
Panasonic TX-40CX300E 40" 4K Ultra HD
= Jari =

More replies
Answer Match 51.24%

I have the same issue in windows 10 home 64 bit-
HDMI monitor no speakers-no sound from anywhere when connected?



When I right click on the volume control, the options it shows are:
open volume control
playback devices
recording devices
sounds
volume control options

It does not give me a properties option.

Then I went to control panel and searched for sound. Then I saw the screen below. There was a Digital Audio as well and I clicked 'Don't use this device(disable)' on it by mistake and clicked OK.



Now, I only have Speakers option. How do I get the Digital Audio option back in here? I think that will solve my original problem.

Thanks

More replies
Answer Match 51.24%

I connected the G50 to monitor and it not output any display.  VGA works fine but nothing from the hdmi.

A:G50 will not output video to hdmi connected monito...

Hi A1ci,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are facing issue with system not able to connect to external monitor through HDMI on your IdeaPad G50.
 

Have you checked with different HDMI cable?
Are you connecting to External monitor or a Televisition?
Please check if the Graphic driver is updated? If not please download the file from the support site and install it.

http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/g50-30-noteboo...
 
Hope this helps.
 
Best regards,
Hemanth Kumar




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Answer Match 51.24%

Hello
 
I am facing some issues, when connecting my Dell E6440 laptop to my LG 55LB650V flat screen.
 
I connect the laptop to the TV via HDMI-cable and I have been trying different cables. The computer has both an Intel HD Graphics 4600 and an AMD Radeon HD 8690M graphic card.
 
When I connect my computer to the TV the screen starts flashing black, every 5 seconds or so. Every time I open a new program the screen flashes and it is also happening sometimes when I do not use the computer.
 
The computer runs at 1600x900 and the TV is a full HD. I have tried to alter the resolution to both and I also tried to use a custom scaling level of 120 % (as 1920 is 120 % of 1600). I have also changed the refresh rate to 59p HZ and 60p HZ, but that made no difference. I have found out that if using the 60i HZ the screen would not flash (at least it have not yet).
 
So at the moment I can use the computer on the TV, but of course I would like to know why the screen is flashing when using 59p or 60p HZ and know what I can do, so I could use these refresh rates.
 
I hope that someone could make me wiser on this problem and maybe give me a solution. If anyone knows, I would also be happy to know what the best custom scaling level to use when using a 1600x900 laptop on a full HD TV is.
 
I really appreciate any help. Thank you in advance!
 
I have recorded two videos that shows the problem:
Part 1: https://youtu.be/DzKU0a0qiqo
Part 2: https://youtu.be/r... Read more

A:Dell E6440 flashing when connected to TV via HDMI

Can anyone please help?

2 more replies
Answer Match 51.24%

As the title says, I've tried connecting my TV to my computer with an HDMI cable, and the video part works, but no sound plays. When I checked the list of playback devices, the TV appeared (as shown below), but it apparently cannot play sound.

I don't think I know anything beyond what I've posted, but if anyone could help me out with this, I would appreciate it.

Also, as a side note - I am completely unable to interact with any of these objects - I cannot set something as a default device; there is no response when I do it, and disabling the audio device only works until current sources of sound (like videos) are restarted.

A:LG TV not playing sound when connected via HDMI cable

If you highlight the LG TV you should​ be able to set it as default. If not, it sounds lik a permission issue (like non-admin account).

2 more replies
Answer Match 51.24%

I know this is one that has been floating around the forums for a while but I have not been able to find anything that works in my situation. When I connect my laptop to my TV (Panasonic Viera Plasma) via an HDMI cable, I can get the video to show on the TV fine but there is no audio on the TV; it comes out of the laptop. I have tried everything I can think of including deleting the drivers then reinstalling them, updating them, rolling them back, etc., etc., etc. Here are the specs on my laptop:HP ENVY dv7 Notebook PCWindows 8.1 64-bit, 8GB RAMIntel(R) Core(TM) i5-3230M CPU @ 2.60GHzIntel(R) HD Graphics 4000Intel(R) Display Audio (with Beats Audio)IDT High Definition Audio CODEC Also, here is a snapshot of the Playback Devices:  As you can see, I have nothing which says "HDMI". I have gotten quite frustrated with not being able to get this to work. I would appreciate any help I can get. Thank you. Alex...

A:HP Envy dv7 - No Audio When Connected to TV by HDMI Cable; W...

Can someone please help...?

9 more replies
Answer Match 50.82%

Microtek UPS MDP800+

Things Connected:
CPU with Corsair VS550 Power Supply Unit (550W)
Samsung Syncmaster 2033 Monitor (37W)

Usually the PC shuts down when the Power Returns. The switching sound is heard (from battery mode to mains) and the PC shuts down. But sometimes it also shuts down during power cuts.

Also the CPU and Monitor are connected to the UPS via extension board as my Power supply Unit's Plug does not fit into any of the UPS Sockets.

It has happened around 20-30 times or so. I think my HD is on the verge of Crashing. Please Help.
 

A:PC shuts Down even while connected to UPS (Urgent)

What's an ?Extension board", is it a surge bar? If so remove that, it's best to have each device directly connected to an individual plug on the UPS. Why don't your plugs fit?

But it may just be a faulty UPS. Seems like a pretty old model, they don't last forever.
 

1 more replies
Answer Match 50.82%

When I boot my computer if I do not disconnect the ethernet cord it shuts down within 1-2 minutes and restarts. If I disconnect the cord before it shuts down my system will keep running with no other issues.


DDS (Ver_10-11-10.01) - NTFSx86
Run by K at 17:15:51.93 on Fri 11/19/2010
Internet Explorer: 6.0.2800.1106 BrowserJavaVersion: 1.6.0_12
Microsoft Windows XP Professional 5.1.2600.1.1252.1.1033.18.1023.703 [GMT -4:00]


============== Running Processes ===============

C:\WINDOWS\system32\svchost -k rpcss
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
svchost.exe
C:\Program Files\Alwil Software\Avast5\AvastSvc.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\CTsvcCDA.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Motive\McciCMService.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe -k imgsvc
C:\WINDOWS\System32\MsPMSPSv.exe
C:\WINDOWS\Explorer.EXE
C:\Documents and Settings\K\Application Data\Microsoft\Windows\shell.exe
C:\DOCUME~1\K\LOCALS~1\Temp\dwm.exe
C:\Program Files\USBToolbox\Res.EXE
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOWS\System32\CTHELPER.EXE
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\Alwil Software\Avast5\avastUI.exe
C:\WINDOWS\System32\ctfmon.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Documents and Settings\K\Desktop\dds.scr

============== Pseudo HJT Rep... Read more

A:System shuts down once connected to net

Hi,

Please do the following:

Download ComboFix from one of the following locations:
Link 1
Link 2

VERY IMPORTANT !!! Save ComboFix.exe to your Desktop

* IMPORTANT - Disable your AntiVirus and AntiSpyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our tools. If you have difficulty properly disabling your protective programs, refer to this link here Double click on ComboFix.exe & follow the prompts.
As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's strongly recommended to have this pre-installed on your machine before doing any malware removal. It will allow you to boot up into a special recovery/repair mode that will allow us to more easily help you should your computer have a problem after an attempted removal of malware.
Follow the prompts to allow ComboFix to download and install the Microsoft Windows Recovery Console, and when prompted, agree to the End-User License Agreement to install the Microsoft Windows Recovery Console.
**Please note: If the Microsoft Windows Recovery Console is already installed, ComboFix will continue it's malware removal procedures.


Once the Microsoft Windows Recovery Console is installed using ComboFix, you should see the following message:
Click on Yes, to continue scanning for malware.
When finished, it shall produce a log... Read more

12 more replies
Answer Match 50.82%

I have a pentium 4, 3.2 ghz w/ ht on an msi board.

My problem is when I try to turn it on, it will turn on for a second
then turn right off, and there is usually a sound (hard to explain.
Anywho, in my diagnosing efforts, I've come to the conclusion that the
12v 4 pin connectior on the motherboard (right next to the processor
is what is causing the issue. When I unplug it, the computer will start
fine, but I will get nothing on the monitor (with my gfx card, and with
onboard.)
MY QUESTION IS, COULD THIS BE CAUSED BY A BAD MOTHERBOARD? OR HOW CAN
GET MY COMPUTER RUNNING AGAIN

thanks

cliffs: pc wont stay on, stays on (but no monitor) when 12v 4 pi
connector removed from mobo
 

A:When 12v 4 pin connected comp shuts down

This is going on the theory that perhaps one of your 12V rails on your PSU is toast. Proceed at your own risk. I'd rather you wait for someone else to reply with an ide before trying this, since its sort of drastic.

Since you've already wired a switch, I'm going to assume you feel somewhat comfortable with the wiring. I'd determine which pins are what on the 4 pin plug, and then cut off one of your molex connectors (that will have 1 12V and 2 grounds and 1 5V), maybe cut 2 if you need 2 12V I'm not sure how those are wired up. Anyway, make your own 4 pin 12V connector and use that.

Plugging it in and getting a spark then a shutdown probably isn't real safe to do, and you could have broke your motherboard from doing that...
 

4 more replies
Answer Match 50.82%

I have a notebook..
Model : TOSHIBA Satellite L-510

and a TV
Model : SHARP LC32A37M (http://vlv.am/wp-content/uploads/pro...9192168124.jpg)

I have a HDMI cable and connected them both.. There are PICTURES.. but no sounds..

Please help.. Maybe if you think I need to install something additional please give me the sites.. Thanks...

My mom has been trying to fix this since last week..

A:Notebook connected to TV with HDMI cable doesn't work. Help pls!!~?

Have you checked the default audio device settings in your sound control panel?

3 more replies
Answer Match 50.82%

Hi, 
I have a Latitude E6440 with an Intel HD Graphics 4600 video card and I have noticed that when the power cord is connected the monitor connected with HDMI goes black and back again randomly. This usually happens several times per minute. 
I have both tried with another HDMI cable and monitor but with the same result.
This never happens when the laptop is running on batteries.

More replies