Tech Problem Aggregator

hp probook 6560b windows 7 pro, unknown device, error 0x8007042c

Q: hp probook 6560b windows 7 pro, unknown device, error 0x8007042c

hey please help my younger relative has borrowed my laptop for a weekend and brought it back to me with no backup dates or system folders, any info would be much appreciated cheers

A: hp probook 6560b windows 7 pro, unknown device, error 0x8007042c

Can you explain more please, I don't know what you mean.

Words are cheap, don't be afraid to use them

2 more replies

Hi,

Everything was working fine. But for last 3 days this error is showing at almost every start. I tried Air Blower and Pin to clean the fan and the outside area. It didn't worked. Today at office TEMP was at 99C.

I opened the case and notice at start when i power on fan doesn't spin at all (only 30 degree spin than stop when i press power). After booting the OS. It spins at very low speed. After that it spin just okay. But not like before. I updated the BIOS to latest version and felt that it reduced the speed of fan. I am worried what should i do?

PS Error occurred before bios update. After update it reduced the fan speed even more.

More replies

Hello everybody,

My name is lightyears_away from the Netherlands and I'm having trouble with my HP ProBook. It is running very slowly at startup and during general use. Sometimes I have to wait 10 - 20 seconds after clicking on an application before something happens. Also, when I open the start menu for the first time after start up, I see that the icons of all programs are not yet rendered. An other thing: when I shut down the system, I often get the message that some program is still running and it may be forced to shut down.

Today I have done an extensive malware/adware/virus sweep with several programs and with Ccleaner. Certain files were deleted but I haven't experienced any improvement. I am wondering whether there is some bug/error in my system configuration that is slowing it down.

Maybe one of you heroic experts here could be so kind to advice me on how to improve the performance of my system? I would be very thankful!

Lightyears_away

I have done a scan with MTB and here is my speccy url: http://speccy.piriform.com/results/sN0w6MP4A6qzCCHae6e13al

MTB log: (I have translated some dutch language to english in the log file)

Mini Toolbox by Farbar Version: 07-02-2016 01
Ran by Luuk (administrator) on 02-06-2016 at 15:30:37
Microsoft Windows 7 Professional Service Pack 1 (X64)
Model: HP ProBook 6560b Manufacturer: Hewlett-Packard
Boot Mode: Normal

A:HP ProBook 6560b on Windows 7 running very slow

First thing I suggest:  Run the chkdsk /r command on the C: partition.

Appears that you have a Dupplica service running...yet no app appears to be installed.  My guess would be that this may account for the VSS errors, since Dupplica seems to assert its own VSS, while Windows has VSS as a native function.  I would disable the currently running Duplicca VSS service.

Louis

0 more replies

I upgraded my Probook 6560b notebook to Windows 10 64-bit and I am having issues with Windows Explorer crashing every couple of seconds. When I attempt to go to the Control Panel to start uninstalling software that may be conflicting with the OS, as soon as I open the Control Panel, Windows Explorer crashes and closes everything that was open and I'm back to the Desktop.  I started uninstalling anything that was HP related on the machine by using the portable version of Reveo uninstaller but I still can't find the culprit, including uninstalling the Validity fingerprint software.  I would appreciate any assistance that anyone can offer me on this issue.  Thanks

A:Probook 6560b Issues After Upgrading to Windows 10

1 more replies

hello I had to reinstall on a new HDD windows 7 64 bits.after reboot I reinstalled he graphic adapter driver (Intel HD 3000) and got- freeze of the computer (means no reaction of anything done on keyboard)- completely corrupted display what i did : reboot in safe mode, uninstall driver, reboot, reinstall : no luckI've also tried with an extrenal monitor (installing driver with a second monitor connected) : and it worked.at that point I was thinking i'm saved, but no luck again.- reboot without the second monitor ends to the same- disconnecting monitor when running ends to the same display corruption. I've also tries some other setting in the intel driver (and other evsions) but no way to have it working only with the laptop monitor. I may say also that i've taken the chance to dualboot on a linux and there it works out of the box. Bios and other frivers are tha latest ones from HP web site. Any nice idea? it will be a pain  to stay on a VGA driver... best JM

More replies

Hi,gave my laptop hp6560b to my daugther. She entered a bioss password administrator but lost it. I would need to remove it now. I read that it can be done with smc.bin. Would it be possible to provide me with the appropriate file. If yes I will send you serial number and uuid of the laptop.Looking forward to your support.Best regardsPat51

More replies

hi, i recently purchased a hp probook 6560b and wanted to give it an upgrade by replacing the standard 500gb 7200rpm hdd with a 120gb force gt ssd. but the notebook doesn't recognize the ssd at all, it says no drive is installed. the notebook has the latest bios available and the ssd has the most recent firmware. i know the ssd isn't defective because it works just fine in my desktop pc. hopefully one of you guys can help me out. thanks in advance.

A:probook 6560b does not recognize my SSD

When the BIOS doesn't detect an ssd, it's probably caused by the voltage of the ssd. I have noticed that some Probooks and Elitebooks have this issue but nobody could find a proper solution. I would contact the BIOS manufacturer..

9 more replies

I have just clone my primary HHD to a Samsung EVO 850 SSD  and when i install the SSD into laptop it does not see the SSD. I have BIOS F22 tried upgrading to F63 but that failed also ....Grrrrrrr  why wont my new Samsung SSD 850 EVO work in my HP Probook 6560b  ????   CAN ANYONE HELP. . . THIS POOR LITTLE AUSSIE. . . THANKS. . .

More replies

Hi, I was working on my HP probook 6560b last week and i set it to Sleep after an hour during which time i also slept. I woke up the following day but my laptop refused to wake up, the charging light (bolt indicator) will be flashing whenever i connect the power supply or the battery. I have removed both battery and power supply and press the power button for approximately 20sec without success. An urgent help is needed to resolve this as soon as possible. Thank you in anticipation.

A:HP Probook 6560b won't power on

We've had a similar issue with our Probooks.  Below are troubleshooting steps we've taken: Removed batteryPlugged in (via power cord)Turned on. Fan running. NO video. Caps light blinking. Can't ping.No response to Ctrl-Alt-DelNo response to pressing/holding power buttonUnplugged. Plugged back in.Turned on. Boots OK. Logged in.Replaced battery. Turned on again. All appears OK.Nothing in the event logs to indicate a critical failure. We've had these steps work for some of the laptops, but others simply offer no response at all.  Then HP sends a box for us to ship laptop for repair and they replace the system board. Of the 250+ of these we've ordered, I'd say we're looking at a 5% fail rate so far (they're 2 months old).

8 more replies

Hi !. Recently bought a HP probook 6560b notebook, it seems quite good to my job(programmer). But RAM memory needs to be upgraded(8 GB) for a better working experience.  - I need to know if this notebook supports DDR3 @1600 MHZ of frequency.- ¿Which are the specs of these RAM's in order to get a better compatibility ?.- Maxium amount of memory supported. By the way, has a processor Intel Core i5 @ 2.1 GHz, two memory modules of 2 GB each.

A:HP Probook 6560b memory support

Danny. Your manual has this listed. PC3-10600, 1333-MHz, DDR3  Supports the following configurations:? 16384 (8192 × 2)? 8192 (8192 × 1)? 8192 (4096 × 2)? 6144 (4096 + 2048)? 4096 (2048 × 2)? 4096 (4096 × 1)? 3072 (2048 + 1024)? 2048 (2048 × 1) http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03052147-1.pdf Let me see if I have one in the warehouse and I will give the 1600MHz a test. REO

1 more replies

HiCan anyone help me with regards to ressting my BIOS administrator password on my machine probook 6560b Product number is WX753AV THANKS IN ADVANCE

A:Bios Password reset for Probook 6560b

1 more replies

Can you please fix the issue with an upcoming BIOSUPDATE? The HDD LED is then constantly lightning and the Notebook does not start. Mine is a Crucial  C300 128GB Many ppl have the same problem linked here: http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/probook-6560b-does-not-recognize-my-SSD/...

A:Probook 6560b does not recognize different SSDÂ´s at 6GBIT (S...

Hi guys I bought Plextor M5S 256gb few days ago. With the latest bios f.40 it was working as SATA2 even when SATA3 in Bios was set. So I have started to looking for some solution and I found one In 6560b we have the same bios like for example 8560p and some 8560p owner tried to downgrade f.40 bios version to f.20 (can be found on 8560p page) and it solved his problem with SATA2 ! So I did the same and here is the result: http://i214.photobucket.com/albums/cc142/DziubekR1/Beznbsptytu1420ubmp_zpsc010cba5.jpg As we can see, the result is much, much better, but to be honest, still worst then I could seen in reviews. I see that in f.20 bios there is no option to change SATA 2 or SATA 3 like in f.40, it is changed automatic. In f.40 we can chosse, but with my HDD it doesnt matter whether it was SATA2 or SATA3 set in bios, it was always working as SATA2. The question is why HP did something like that with the latest bios. If there was some problem with SATA3 that we dont know about, why they gave us the choice between SATA2 and SATA3 in f.40 ? For now it is working without any problems, but maybe we dont know everything  BTW I was looking for some solution to make my 6560b silent and I found a great program - " TPFanControl by troubadix", version for 4530s works great with our 6560b. You can try it

8 more replies

Hi All, I recently purchased Probook 450 G3 T4M99UT#ABA version. It came with windows 7 out of the box. I used included dvd and installed windows 10 pro 64bit. By fowllowing instruction paper i installed drivers from  included driver disk + latest from support website but still there is an unknown hadware on my device manager. It does not even give me a hardware id to lookup. Anyone know whats going on? I included some screenshots

A:probook 450 g3 T4M99UT#ABA unknown device

Hi: On that details tab drop down list in your screenshot, select the device instance path and post the info that shows up there. That will tell me what the device is and what driver it needs.

2 more replies

Hi, I have just installed Win 7 Ult x64 on my laptop. Then I have installed all the drivers needed from HP website and I have installed ESET NOD32 Antivirus. When using my computer I have registered two BSOD so far (it is 12 hours from installation).

The problem:
It is not exactly BSOD which I can see.
I command my PC to shut down - it starts to shut down - there is a sign Shutting down... for maybe 20 minutes and the PC then restarts. When it logs into the Windows a dialog appears that the system recovered from serious error, bsod giving error number 1000009f.

Please, control my dump files. I suspect some of the drivers as HP drivers support is everytime very bad.

Thanks a lot!

A:Clean instalation of HP Probook 6560b - BSOD 1000009f

Update the drivers to:
Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter: Driver Reference Table - rtl8187.sys
Also:

Code:
fffff880031b5a48 fffffa80`058bd600Unable to load image C:\Program Files\ESET\ESET NOD32 Antivirus\em018_64.dat, Win32 error 0n2
*** WARNING: Unable to verify timestamp for em018_64.dat
*** ERROR: Module load completed but symbols could not be loaded for em018_64.dat
em018_64+0x63600
Uninstall Nod32, at least as a test. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Let us know the results.

9 more replies

Hi, i forgot my administrator password for bios access for my HP Probook 6560b. Can you help me with this issue?  Thanks in advance.

1 more replies

Hi all, Repost here folowwing advise from HP support (original post here - http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/upgrade-wwan-un2430-card/m-p/4213726#M40... ) to the existing wlan card in probook 6570b added WWAN un2430 Sierra Wireless Gobi 3000 MC8355 card. All drivers in place (used from HP site 1.0.45.0 for un2430):- HP un2430 Mobile Broadband Module Modem- HP un2430 Mobile Broadband Module Diagnostics- HP un2430 Mobile Broadband Module NMEA- HP un2430 Mobile Broadband Module USB Deviceexcept one:- HP un2430 Mobile Broadband Module USB Device and hardware ids is "USB\Vid_03f0&Pid_371d&MI_06"(result almost same for 6560b) When tried to run HP connection Manager (4.7.4.1) i see permanent "device is initializing" message and nothing happend. System win 7pro 64bit Appreciate if someone can guide what else should be done\installed to get it into working state.

A:Upgrade wwan un2430 card in Probook 6560b\6570b

HP support! Any comments on the issue? Thank you.

4 more replies

Hello, Here is the problem that I've encountered with my laptop HP 6560b. My HDD has crashed and is beyond repair. I've went into the store and bought new HDD-SSD (Samsung 840 pro). I've replaced crashed HDD with new SSD. But to no joy. During WIN7 installation I've came to part where I need to select place where I want to have my new OS. Thing is it's can't be read. So I've dig around the internet and found out that BIOS is issue with these new SSDs. So I've decided to update my BIOS. BIOS is currently on versio 68SCE Ver. F.08 I've downloaded latest version of BIOS sp62738 from HP Support Center I've unpacked sp62738.exe and started HPQFlash. Through menu I've setup FLASH for update.  Folder structure of FLASHHP_TOOLS\HEWLETT-PACKARDcontains following folder structure   BIOS   BiosUpdatewithin BIOS folder there are two more folders and some BIN and SIG files   Current      .BIN      .SIG   New      .BIN      .SIGand within BiosUpdate    CryptRSA.efi   CryptRSA32.efi   HpBiosUpdate.efi   HpBiosUpdate32.efi   HpBiosUpdate.log   HpBiosUpdate.s09   HpBiosUpdate32.s09   HpBiosUpdate.s12   HpBiosUpdate32.s12   HpBiosUpdate.sig   HpBiosUpdate32.sig I've sticked FLASH into Laptop and rebooted. I've got the messa... Read more

A:Probook 6560b BIOS issue with update from FLASH drive

When you executed the download BIOS softpaq, did you create a flash bootable key at that point? i assume you used another computer to do that? If you created a bootable usb key from the BIOS softpaq, you will see 3 files 68SCF.BINeRompaq.exegpl2.txt You can then insert the key no the laptop usb port and reboot to upgrade the BIOS. Is this what did not work?

3 more replies

Hi, I'm updating a Probook 4740s to windows 10, but I can't find the driver for an unknown device : USB\VID_138A&PID_003D\0030EACE788E Can anyone help me?

A:Driver for unknown device (Probook 4740s WIN10)

1 more replies

Mod Edit: Moved from Win8 to the Am I Infected forum ~~boopmeI randomly decided to look at McAfee and check my settings, etc.  When looking at the main screen, everything states its on and green.  I had the most current definitions loaded.  When I checked my McAfee firewall it stated on.  When I clicked to go into the McAfee firewall, the screen then changed and said it was off.  When clicking the Turn On button, it would immediately shut off.  I searched this issue and the blogs stated to look at the Windows Firewall under Services.  When I checked, it was not there.  I did a Windows Search for it and found it.  When it opens it gives tells me I need to Update the Firewall Settings.  When I click on Use Recommended Settings it gives me an error "Windows Firewall can't change some of your settings.  Error Code 0x8007042c." I've checked out some of the blog discussions and followed a few thread about creating new register.bat files and running them.  I've also tried merging some .dll files also per the bloggers.  After doing these actions, the Windows Firewall now appears in my Services but when I click to start it I get the error "Windows could not start the Windows Firewall Service on Local Computer.  Error 1068:  The dependency service or group failed to start"

A:Can not start Windows Firewall - Error Code 0x8007042c and Error 1068

McAfee has verified I have a virus.  Will post in the Virus Forum.

15 more replies

So when i try to get Windows Firewall to run on recommended settings i get error 0x8007042c.
So far i have tried-
all four methods on the microsoft help page here:
?0x8007042c? error message when you try to start Windows Firewall
when i tried manually starting it i got error 1068 the dependency service or group failed to start

Ive also tried
Windows could not start Error 1068: The dependency or group failed - Microsoft Community
although i dont have aland line so idk if what i did affected it well or not... person who wrote the thing had a wlan so idk if what i did was wrong.. anyone wanna let me know?

it didnt help either.

so i ran sfc /scannow on elevated command prompt and got it to my desktop (learned how to do that today )
here is what i got on it.... can anyone help me figure out what the issue is and how to solve it?
im only gonna post the stuff it cant repair, i dont think yall need the other stuff.

a third of the way through-
2014-01-06 10:56:16, Info CSI 000000e8 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-06 10:56:16, Info CSI 000000ea [SR] Cannot repair member fil... Read more

A:Windows Firewall error 0x8007042c + error 1068 (manually starting)

Welcome to the WSF, Junyahh!

Please use the following diagnostic tool. It has a powerful detection mechanism, and may help us get to the cause of your issues:

Please use the Farbar Recovery Scan Tool.
Select the version that applies to your system.

When the tool opens click Yes to the disclaimer.
At the program's console, press the Scan button.

When done, the tool produces a log, FRST.txt, in the same directory from which the tool is run (Desktop).

The first time the tool is run, it also makes another log: Addition.txt

Also, use the Farbar Service Scanner

Let's get a view of all services and dependencies scoped by the tool...
Make sure the following options are checked:

Internet Services
Windows Firewall
System Restore
Security Center
Windows Update
Windows Defender

Press: Scan

When done, FSS creates a log, FSS.txt, on the Desktop.

Thank you.

1 more replies

Greetings from Wisconsin,The more I dig, the more problems I seem to uncover. Finally, I turn to you for help. It begins with what appears to be "no firewall in place" on this Dell Win 7 desktop.Help would be greatly appreciated.In advance, thank-you!- Steve*** Mod Edit: Moved topic from Windows7 to the more appropriate forum. ~ bloopie ***

A:Windows 7 Firewall Error 0x8007042c

31 more replies

I hope picture explains everything
PS. It has been like this for a year.

A:I can't use my Windows firewall, because of the error 0x8007042c

A whole year? Wow.

First thing I'd do is run a full anti-malware scan with free Malwarebytes.

Malwarebytes : Malwarebytes Anti-Malware PRO removes malware including viruses, spyware, worms and trojans, plus it protects your computer

I'd next run a System File Checker scan to make sure you don't have any damaged or corrupt system files. Run teh scan from an elevated command prompt (option two, this tutorial.) If any problems are found, run the scan three times rebooting in between each scan.

SFC /SCANNOW Command - System File Checker

See if the firewall can be used. If not, try Methods 2 and 3 in this Microsoft article.

http://support.microsoft.com/kb/2530126

Please post back if any of this helped or not.

5 more replies

Hello and thank you for helping with my problem. Before I begin, here is the link for the help I have received so far by Broni. At his request, I am posting the following: About 6 months ago, I was infected by Win 7 antivirus (or security) 2011. I immediatly ran a quick scan with Malwarebytes and it found 5 or 6 infections. After rebooting, I ran it again to make sure it was off and the scan ran clean this time. Since then, there has been no indication (no slow browsing,no programs crashing, no internet disruptions) that an infection is there. Somehow today I found out that Windows Firewall was turned off. I tried to turn it on and it would not come on. It gave me error code 0x80070424. After researching the error, it looked as if it were a registry error so I turned to bleepingcomputer (see above for the link to my original post). After troubleshooting with Broni, the error I am getting when I try to start Windows Firewall is 0x8007042c. Per Broni, I followed the instructions in the Preperation Guide, starting with number 6. I was able to run everything except number 8, GMER Log, because I have a 64-bit system. Again, thanks for the hard work you guys/girls do here!DDS.DDS (Ver_2011-08-26.01) - NTFSAMD64 Internet Explorer: 9.0.8112.16421 BrowserJavaVersion: 1.6.0_31Run by Administrator at 20:25:05 on 2012-03-11Microsoft Windows 7 Home Premium 6.1.7601.1.1252.1.1033.18.6038.3922 [GMT -5:00].AV: avast! Antivirus *Enabled/Updated* {2B2D1395-420B-D5C9-657E-... Read more

A:Can't open Windows Firewall - error 0x8007042c

9 more replies

Not sure what's been happening, I'm an admin on this laptop. Whenever I keep trying to start Windows Firewall it will not start any way possible.

But an error that occurs is this
Error 0x8007042c

Looked all over the internet, did mbam scans and didn't really make a difference. I do not have any other anti-virus software than mbam nor have any other sort of firewall program.

If someone could help me, I would be very grateful.

A:Windows Firewall Problem Error 0x8007042c

You say looked all over the Internet? Did you try adding a Local Service account? I've seen that step resolve that error more often than not. However I have seen it not resolve the issue as well. This particular error seems to have stumped many people and have multiple resolutions.The steps for adding a Local Service account are as follows:Control Panel ->Systems & Security ->Administrative Tools -> (scroll down to) Windows Firewall -> double click Windows Firewall -> click Log On Tab -> select This Account -> Browse for LOCAL SERVICE user (Advanced -> Find Now -> LOCAL SERVICE) -> Leave the password field blank Apply the changes.Here is one of several copies of the same instructions:http://answers.microsoft.com/en-us/windows/forum/windows_7-security/windows-firewall-cant-change-some-of-your-settings/2679690e-c375-4232-ae45-404374386635Scroll down to the one dated Dec. 13, 2009 by Mladen SavicHope this helps

47 more replies

Windows Firewall won't start, getting error code 0x8007042c. BFE won't start, error 5: access is denied. I've scanned for viruses using Malwarebytes and nothing showed up. I tried downloading and adding the registry files again as suggested in some other threads, but that didn't work. I tried following the instructions in this thread for fixing the BFE, and after running

REG QUERY "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-18" /S

I got "ERROR: The system was unable to find the specified registry key or value". The other commands returned normal results.

SFC /scannow returned corrupted files "utc.app.json" & "telemetry.ASM-WindowsDefault.json" but this was fixed with The Tech Cookbook fix - The Tech Cookbook – Windows 7 update (KB3022345) causing corrupt files.

A few weeks ago my Network Diagnostic Service sometimes would not be running either, but that just stopped happening so I'm not sure what caused it or what fixed it.

Thanks.

A:Windows Firewall won't start, error 0x8007042c

cherruc,

Please use the following diagnostic tools to help us get to the cause of your issues:

Select the version that applies to your system: 64-bit

When the tool opens click Yes to the disclaimer.

At the program's console, press the Scan button.

When done, the tool produces a log, FRST.txt, in the same directory from which the tool is run (Desktop).

The first time the tool is run, it also makes another log: Addition.txt

Also, use the Farbar Service Scanner

Let's get a view of all services and dependencies scoped by the tool...
Make sure the following options are checked:

Internet Services
Windows Firewall
System Restore
Security Center
Windows Update
Windows Defender

Press: Scan

When done, FSS creates a log, FSS.txt, on the Desktop.

Thank you.

9 more replies

I removed Win 7 Antivrus 2011, from my win 7 ultimate x64 machine.

It appears like I removed the virus successfully but can not re-enable the firewall.

I get this "Windows Firewall Can't change some of your settings, Problem Error 0x8007042c " dialog box.

I have been digging around and the firewall service is missing, the file itself has gone missing.

I tried to run scf /scannow but scf is not recognized as an executable no matter what I try.

Not sure where to look next, it appears a fair number of people have bumped into this issue.

A:Windows Firewall Problem Error 0x8007042c

I believe that you will need help from the anti-virus team. they will be with you shortly.

1 more replies

I had issues with Commodo firewall or so I thought. I unistalled Commodo and then tried to activate Windows Firewall and received the error message. I tried the fixed it steps on the Microsoft website but did not get any good results. Tried to reinstall Commodo and it would not launch.

So I have no firewall and I need one

Read somewhere that given these circumstances it is possible that I have been hijacked

I do not have a boot disc nor do I have a windows install disc

computer is a dell inspiron N5050 running windows 7

John

DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 11.0.9600.16518 BrowserJavaVersion: 10.13.2
Run by chloe at 22:18:15 on 2014-04-23
.
============== Running Processes ================
.
C:\Program Files (x86)\Common Files\COMODO\launcher_service.exe
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files (x86)\Dell Wireless\Bluetooth Suite\Ath_CoexAgent.exe
C:\Program Files (x86)\Microsoft\BingBar\7.3.124.0\BBSvc.exe
C:\Program Files (x86)\Comodo\Dragon\dragon_updater.exe
C:\Program Files (x86)\Common Files\COMODO\GeekBuddyRSP.exe
C:\Program Files (x86)\Nuance\PaperPort\PDFProFiltSrvPP.exe
C:\Program Files (x86)\Dell DataSafe Local Backup\sftservice.EXE
C:\Program Files (x86)\Microsoft Application Virtualization Client\sftvsa.exe
C:\Program Files (x86)\Sendori\sndappv2.exe
C:\Program Files (x86)\Sendori\SendoriSvc.exe

A:Cannot set windows firewall error message 0x8007042c

jrsarge,

Hi and welcome to TSF.

I am currently reviewing your logs. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem as soon as possible.

If you haven't already, please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please be patient with me during this time.

19 more replies

Hello all!

ive been trying to work around this issue for about 5 hours now. I have tried many fixes that people are suggesting from all coners of the internet! If anyone else can help out that would be great!

Here are the things i have tried;

I first started this journey with the error code 0x80070424, which was fixed with the microsoft FixIt
I have now been given the error code 0x8007042c, as stated above in the title
I have tried to get poast this with FixIt from MS but with no luck.
I then went onto trying the manually starting windows fix from this website; http://support.microsoft.com/kb/2530126 , i can get all the way through the steps untill the last one "BFE" because this gives me an error code: 5, access denied.
Ive removed all antivirus software thinking that this may be blocking the firewall by some chance.
I have done many virus scans with all the recommened tools, and i have found nothing.
I have also gone through some of the previous threads about this problem and tried them also. It just seems that i can get past this shit if i can give myself the permission to turn on "BFE". Although im the only account on this pc so its the admin account.

So as you can see i swear im coming to the end of all the fixes out there and everything is leading to a complete reinstall of windows 7; which is a no go, because i can not be bothered with download a TB worth of games haha. ill just deal with the no window fire wall. But any help to get this fixed i... Read more

A:Windows FireWall Problem, Error 0x8007042c

Here are the things from FRST 64bit, if you ask this question.

9 more replies

Hi,
I know there are many threads for this issue., but i have tried quite a few of them and no results as of yet. My laptop shows no errors in device manager and i have used numerous cmd commands that have found zero issues with my laptop and also the windows firewall fixit program that was listed in the forums but still no internet access and no firewall.

any help would be greatly appreciated thank you

A:Windows Firewall error 0x8007042c with no network access

Welcome to the forum, celtimcbagpipes!

Please use the Farbar Recovery Scan Tool.
Select the version that applies to your system.

When the tool opens click Yes to the disclaimer.
At the program's console, press the Scan button.

When done, the tool produces a log, FRST.txt, in the same directory from which the tool is run (Desktop).

The first time the tool is run, it also makes another log: Addition.txt

Also, use the Farbar Service Scanner

Let's get a view of all services and dependencies scoped by the tool...
Make sure the following options are checked:

Internet Services
Windows Firewall
System Restore
Security Center
Windows Update
Windows Defender

Press: Scan

When done, FSS creates a log, FSS.txt, on the Desktop.

Thank you.

.

9 more replies

Hello:

I'm looking for some assistance. I have a Lenovo 8811 ThinkCentre desktop running Windows 7 Ultimate SP1; 2.13gig Intel Pentium Core2 with 3 MB memory.

This is my teenage son's computer. We are trying to set up workgroup to share files across wireless network (having difficulty there, but that is another story). I noticed Windows Firewall not operational. When attempting to turn on firewall and update settings, receive message that "Windows Firewall can't change some of your settings. Error code 0x8007042c."

We use Windows Essentials for virus protections. I tried some things I found researching, but it hasn't help. Updated Windows Firewall Authorization Driver Startup type to Demand and other things. Ran Malware, SuperAntiSpyware that found several trojans, adware, etc. Disenfected and reemoved but still can't start Windows Firewall.

I'm sure there are other issues with this machine, but not having working firewall scares me. My son tells me a "Dirty Install" will fix this. I don't know what that is?

lecraig

A:Can't start Windows Firewall - error code 0x8007042c

Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result. Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products... Read more

7 more replies

Good morning to all of you!

I've discovered this treasure vault of helping tools and good advice through Google, after searching for the n-th time for a solution to my persisting problem.
Specifically I found -and read!- this thread here as the symptoms are ~99.9% similar to what I have too. The first indication that something was wrong was when the other PCs in my home network 'lost touch' with me. I found that the firewall was down and that it was impossible to start it (getting the message on the Topic Title). Then some, not all, windows updates started to fail to install -if I'm not mistaken, all of them were related to fixes to the NetFramework libraries.

Now, before I start going step-by-step through the list of actions you adviced user 'scorcher' to perform, I thought it would be useful if you had a picture of the current state my system is in. Perhaps there is something a bit different, calling for a special intermediate action. Below I append the contents of DDS.txt and I also attached file "Attach.txt" (renamed, for my convinience "1-Attach.txt").

------------------------- DDS.txt -------------------------
DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 10.0.9200.16611  BrowserJavaVersion: 1.6.0_27
Run by Raniko at 11:46:18 on 2013-07-10
Microsoft Windows 7 Ultimate   6.1.7601.1.1253.30.1032.18.8190.6135 [GMT 3:00]
.
AV: AVG Anti-Virus Free Edition 2012 *Enabled/Updated* {5A2746B1-DEE9-F85A-FBCD-ADB11639C5F0}

A:Windows Firewall not starting - error code 0x8007042c

12 more replies

Hello there!
It seems i have some sort of a firewall problem.

It says Action Center cant turn on Windows firewall, do this manually but when i try Use recommended settings, i get this error...

Could anyone tell me how i can fix this?
Is some service not working properly? (Action Control Center)
I've already run Free NOD32 online scanner and tried to fix it with Tweaking.com Windows Repair tool but no luck.

A:Cant turn on/update Windows Firewall error 0x8007042c

Hi, Krasto. Welcome to SevenForums!

Please see Microsoft KB Article 2530126, which addresses the problem you are experiencing: Error code: 0x8007042c "Windows firewall cannot change some of your settings" when you try to turn on your Windows Firewall.

1 more replies

Fellas,

I'm quite an expert in these matters, this error has really got me.

Background:

AVG 2015 hangs on 59% , won't update, won't uninstall even with removal tool

Avast 2015 won't install ( Base Filtering Engine service is not running )

Microsoft Safety Scanner just goes round and round

(have quarantined all the areas its infected + removed)

Cannot set the windows firewall to ON , nor install an antivirus

Very odd ..

A:Windows Firewall can't change settings, error 0x8007042c

Step 1.Double click on AdwCleaner.exe to run the tool.
Vista/Windows 7/8 users right-click and select Run As Administrator.
Click on the Scan button.
AdwCleaner will begin...be patient as the scan may take some time to complete.
After the scan has finished, click on the Report button...a logfile (AdwCleaner[R#].txt) will open in Notepad for review (where the largest value of # represents the most recent report).
The contents of the log file may be confusing. Unless you see a program name that you know should not be removed, don't worry about it. If you see an entry you want to keep, let me know about it.
Copy and paste the contents of that logfile in your next reply.
A copy of all logfiles are saved in the C:\AdwCleaner folder which was created when running the tool.
Step 2.
This time click on the Clean button.
Press OK when asked to close all programs and follow the onscreen prompts.
Press OK again to allow AdwCleaner to restart the computer and complete the removal process.
After rebooting, a logfile report (AdwCleaner[S#].txt) will open automatically (where the largest value of # represents the most recent report).
Copy and paste the contents of that logfile in your next reply.

A copy of that logfile will also be saved in the C:\AdwCleaner folder
******Post both .txt logs

9 more replies

I recently got back home from a trip to central america. And after tinkering a bit I realized my Firewall was not active any attempts to turn it on resulted in an error. Please help

A:Cannot turn on Windows Firewall- Error Code (0x8007042c) win 7 hm x64

“0x8007042c” error message when you try to start Windows Firewall

1 more replies

I am having a problem with windows firewall. I cannot turn on my firewall, whenever I try to turn it on I get this error (Windows Firewall can't change some of your settings-Error code 0x8007042c)
and i didnt found the zero access with rkill, here is my log from rkill:

---------------------------------------------------------------------------------------------------------------------------------

Rkill 2.6.5 by Lawrence Abrams (Grinler)
http://www.bleepingcomputer.com/
http://www.bleepingcomputer.com/forums/topic308364.html

Program started at: 04/11/2014 11:59:18 PM in x64 mode.
Windows Version: Windows 7 Professional Service Pack 1

Checking for Windows services to stop:

* No malware services found to stop.

Checking for processes to terminate:

* C:\ProgramData\DatacardService\HWDeviceService64.exe (PID: 2504) [AU-HEUR]
* C:\ProgramData\DatacardService\DCSHelper.exe (PID: 2608) [AU-HEUR]
* C:\ProgramData\DatacardService\DCSHelper.exe (PID: 2872) [AU-HEUR]

3 proccesses terminated!

Checking Registry for malware related settings:

* No issues found in the Registry.

Resetting .EXE, .COM, & .BAT associations in the Windows Registry.

Performing miscellaneous checks:

* Windows Defender Disabled

A:Cannot turn on Windows Firewall- Error Code (0x8007042c)

32 more replies

Hi,

Not exactly sure what happened, but my Windows Firewall is turned off and I cannot turn it back on.
I receive error code 0x8007042c when I try to turn it on manually.

Ran Panda Antivirus Free and Malwarebytes Anti-Malware and no virus or malware found.

I've tried the suggestions from the Microsoft website ?0x8007042c? error message when you try to start Windows Firewall but no success.

I've also gone to Services and run as admin. Received the following error messages for each when trying to start the service:
1. Windows Firewall: "Error 1068: The dependency service or group failed to start."
2. Base Filtering Engine: "Error 5: Access is denied."
3. SharedAccess/Internet Connection Sharing: "Error 1068: The dependency service or group failed to start."

Can anyone help?

Thank you!

A:Windows Firewall can't change settings, error 0x8007042c

Hi bhawks,

Try this methods: Windows firewall can&#39;t change some of your settings Error code - Microsoft Community

If no virus or malware found on your scan. I would suggest doing a System Restore from the day you think your firewall is enabled. Also, you can do SFC /SCANNOW

9 more replies

Hi guys,

It seems windows won't let me breath easy for long .

Problem description :
==================
I am unable to connect to wired or wireless internet, reason being, I think, is because windows firewall is not starting.
Not sure why this happened but I think its because of a false flash update which might have been a rogue program, ( rootkit kindof though NOT sure ). Also let me tell you that, I frequently use utorrent to download movies, just in case if that might be the root cause.

After going through tons of posts I thought of starting this thread which, I hope turns out to be of genuine help to others as well.

System Specifications :
===================
Dell Inspiron N4010
Windows 7 Home Premium ( 64 bit ) SP1
Antivirus : Microsoft Security Essentials ( nothing else )
Dual boot system along with Ubuntu ( which comes to my rescue time and again )
Tried the following solutions in the given order,
=======================================================================
Solution 1 :
==========
Tried starting the BFE and Windows firewall service manually using admin rights.

Result : Gave error code 0x8007042c

=======================================================================
Solution 2 :
==========
Tried running sfc scannow using admin rights.

Result : Please find attached the screenshot showing the output of sfc scannow & CBS.log file

=======================================================================
Solution 3 :
==========
Tried scanning the ent... Read more

A:Getting error code 0x8007042c when trying to start windows firewall

Download these programs from a PC with Internet Access use a USB Flash Drive to move the programs over

* Farbar Recovery Scan Tool

Right click on FRST64.exe and choose

When the tool opens click Yes on the disclaimer window .

Press Scan button.

FRST will let you know when the scan is complete and has written the FRST.txt to file

Note
The first time Farbar Recovery Scan Tool is run, it makes also another log Addition.txt

FRST.txt and Addition.txt will be on the Desktop

* RogueKiller

Click on one of the links above that goes with your Windows 7 bit versions

Save to the Desktop.

Close all windows and browsers

Right click on and choose

Press: SCAN

* Farbar Service Scanner

Place a check mark next to the following options
Internet Services
Windows Firewall
System Restore
Security Center
Windows Update
Windows Defender
Press the Scan button

Farbar Service Scanner will create a log, called FSS.txt, on the Desktop. Upload the FSS.txt with your reply

9 more replies

I am having a problem with windows firewall. I cannot turn on my firewall, whenever I try to turn it on I get this error (Windows Firewall can't change some of your settings-Error code 0x8007042c)
I have  malwarebytes anti-malware on my computer and kaspersky anti virus, neither of these will pick up any virus or malware.

and i didnt found the zero access with rkill, here is my log from rkill:

---------------------------------------------------------------------------------------------------------------------------------

Rkill 2.6.5 by Lawrence Abrams (Grinler)
http://www.bleepingcomputer.com/
http://www.bleepingcomputer.com/forums/topic308364.html

Program started at: 04/11/2014 11:59:18 PM in x64 mode.
Windows Version: Windows 7 Professional Service Pack 1

Checking for Windows services to stop:

* No malware services found to stop.

Checking for processes to terminate:

* C:\ProgramData\DatacardService\HWDeviceService64.exe (PID: 2504) [AU-HEUR]
* C:\ProgramData\DatacardService\DCSHelper.exe (PID: 2608) [AU-HEUR]
* C:\ProgramData\DatacardService\DCSHelper.exe (PID: 2872) [AU-HEUR]

3 proccesses terminated!

Checking Registry for malware related settings:

* No issues found in the Registry.

Resetting .EXE, .COM, & .BAT associations in the Windows R... Read more

A:Cannot turn on Windows Firewall- Error Code (0x8007042c)

i uninstalled the kaspersky but the problem remains!!!!

4 more replies

I am having a problem with windows firewall. I cannot turn on my firewall, whenever I try to turn it on I get this error (Windows Firewall can't change some of your settings-Error code 0x8007042c)
My computer is running windows 7 x64, 4gb ram, q8200 2.3GHZ quad core processor) I have windows security essentials, malwarebytes anti-malware on my computer, neither of these will pick up any virus or malware.

Mod Edit
Moved to win7  as I believe this is a "services" issue. ~~ boopme

A:Cannot turn on Windows Firewall- Error Code (0x8007042c)

Try this :

...or....
You can start the Windows Firewall services manually and make sure that they start automatically in the future. To do this, follow these steps:
Click Start , and then type Services in the Search box.
Right-click Services. and then click Run as administrator. If you are prompted, enter your administrator user name and password, and then press Enter.
Scroll until you see Windows Firewall, and then double-click Windows Firewall.

13 more replies

I'm pretty sure it was caused by some virus that disabled it. Windows firewall authorisation driver stated that >> This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)

I had uninstalled my trend micro titanium from my laptop and installed microsoft security essentials ... And security essentials keep on detecting potential threats. I cleaned it and restarted my laptop and a blue screen came out said that some errors preventing windows from opening and the whole system restored back to few hours before ... But still, firewall was unable to start windows firewall ...

Solutions ?

A:Unable to enable windows firewall , error code 0x8007042c

Quote: Originally Posted by sxcherzinger

I'm pretty sure it was caused by some virus that disabled it. Windows firewall authorisation driver stated that >> This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)

I had uninstalled my trend micro titanium from my laptop and installed microsoft security essentials ... And security essentials keep on detecting potential threats. I cleaned it and restarted my laptop and a blue screen came out said that some errors preventing windows from opening and the whole system restored back to few hours before ... But still, firewall was unable to start windows firewall ...

Solutions ?

Error code: 0x8007042c "Windows firewall cannot change some of your settings" when you try to turn on your Windows Firewall

9 more replies

Hello everyone,

I bought my PC about a half year ago. My graphics card was outdated so I decided to buy a new one, and once it was installed with the drivers, everything was working fine until a few nights ago when my PC would start to boot up and constantly have to reboot.

After a few cycles, I finally got it to work but it happens every time I turn on my PC.

Another possibly unrelated error occurred when I tried to load up the steam desktop app, and it could not connect so I figured the firewall was blocking it so I went to the control panel and I'm getting the error, "Windows firewall can't change some of your settings" when I try to use recommended settings.

XxvenomxX

P.S. I'm kind of new to computers so try not to go to technical... Thanks!

More replies

I've got a HP Probook 450 G3"with Windows 10.Recently I received this note at startup: "Smart Audio. A Conexant audio device could not be found. The application will now exit." Thereafter, Windowns informed me that it did a scan and found a possible solution, for which I need to restart the notebook. This I did, but the same initial message appeared. The speaker icon on the taskbar also still have a red cross next to it. I then download the Audio driver from here: Conexant High-Definition (HD) Audio Driver (American, Internationalhttp://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=7834518&swLangOid=8&swEnvOid=4192Had it installed, restarted the notebook, but still the initial message appears. I thus do not have any audio and the audio button on the keyboard also doesn't respond to swithing audio on/off. Please help,

A:Probook 450 G3 with windows 10: Conexant audio device proble...

Hi: Please see the solution marked on this post for the resolution to your dilemma... http://h30434.www3.hp.com/t5/Desktop-Audio/Driver-Multimedia-Audio-Controller/m-p/5643953#M54748

1 more replies

I have Windows 7 Ultimate. Since very recently an unknown device keeps popping up in the device manager every time I start Win. It's reported location is within the front USB root hub but I haven't changed there anything lately. The device status reports "Windows has stopped this device because it has reported problems (Code 43)". I can uninstall/disable it but it will get picked up again the next time I reboot. All other usb devices (mouse, keyboard, web camera, APC UPS, external drive, printer) work fine. How do I get rid of this nuisance so that it doesn't reappear?

A:Unknown device: Windows has stopped this device because it has reported problems (Cod

6 more replies

hi, heres my problem:

* USB 2.0 doesnt work when plug in to USB port. XP gives message Unknown USB device. USB has malfunctioned..

* from device manager here is my USB devices.

SiS 7001 PCI to USB Open Host Controller
SiS 7001 PCI to USB Open Host Controller
SiS PCI to USB Enhanced Host Controller
USB 2.0 Root Hub
USB Root Hub
USB Root Hub

I have SP2 installed, did reformat my hard drive and install fresh windows XP. all the drivers are up to date and even the BIOS.

What is causing this problem? Any help would be greatly appreciated...

PS. When i disable USB 2.0 Root hub and SiS PCI to USB Enhance Host Controller. The storage drives work in USB 1.1. My external usb drive is a HITACHI 10 G hard drive.

A:USB 2.0 storage device malfunctioned in Windows XP. Unknown Device!?!

recently I had a friend who expierienced the same problem with a Nforce chipset after a fresh install of XP with SP2. even though SP1 and SP2 insclude the drivers for USB2.0 his usb 2.0 devices werent working. he ahd to go to the Motherboard makers site and download the USB 2.0 drivers and then it worked.

73 more replies

hello i need help with my firewall its not working i try everything from this website ?0x8007042c? error message when you try to start Windows Firewall but it does not work .

A:i need help with error 0x8007042c

nevermind

1 more replies

Hello I keep getting this 3 errors (Error Code 0x8007042c, Error 1068 and (-5001 : 0x80070002), after installing:

Update for Windows 7 for x64-based Systems (KB2607576)

and

Update for Windows 7 for x64-based Systems (KB2603229)
Although both updates installed successfully I keep getting this errors since today when I installed those updates here are some pics:

http://i1178.photobucket.com/albums/...ewallerror.jpg

I cannot start windows firewall

not even from here

http://i1178.photobucket.com/albums/...artuperror.jpg

and I can't install games either

http://i1178.photobucket.com/albums/...stallerror.jpg

I cannot do a system rollback since it says there were no restore points but I could do a rollback before, I've uninstalled those updates also but the problem persist

A:Error Code 0x8007042c, Error 1068 and (-5001 : 0x80070002) after insta

Anyone? I'm really scared by the fact that my firewall does not work That means my computer is vulnerable

9 more replies

Hello all,

This my first experience here, but i plan to stay tuned to this forum as it seems to be the most authoritative and useful forum that I have come across on the Web. I will definitely be more on the receiving end than the advising end, I'm afraid.

I have apparently been attacked by a malicious trojan (at least, I think that's what it is). Java/Anogre.E (and apparently some others along with it) . No apparent malfunction at this point.  I have Microsoft Security Essentials running on Windows 7 (64 bit).  MSE apparently blocks repeated attempts at this intrusion, but it seems that my Windows Firewall is out of commission.  My Registry has apparently been corrupted and I cannot run any of the programs necessary to start Windows Firewall.

I have run a Full Scan of MSE and it does not find anything. I have completely uninstalled Java and downloaded a new version. I have also run SFC/SCANNOW and it is not able to fix the problem.  I have followed the advice of many people without any success.  In most cases, the final advice has been to throw in the towel and do a complete reinstall of Windows 7 (advice that, although well intentioned, only serves to give me a headache).

The only successful solution that i have come across is here on this forum in a thread from early December of 2011.  In that event, the person with the Firewall problem had the username, Demand209.  The person who guided him through the ... Read more

A:error code 0x8007042c

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/543893 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

2 more replies

i have a desktop pc, powered by amd athlon x2 and abit mainboard.

everything was ok until suddenly it couldn't detect any of my usb device on any of the 6 usb ports. when i checked in the device manager, it listed like this :

Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller
Unknown Device
Unknown Device
USB Root Hub
USB Root Hub

trial an error, i disabled the Standard Enhanced PCI to USB Host Controller, now it can detect the USB device, but only on one port. The other 5 ports still malfunction.

one thing i realise is that the clock went wrong. i fix it but nothing changes.

this is not the 1st time it happened, but i forgot the last time how i fix it up. i'm blank now, so please help me up.

thanks a lot

A:Unknown device error

remove all usb devices.

in device manager click on View | Show Hidden Devices

uninstall all USB Root Hubs and controllers.

reboot, enter BIOS, make sure USB is enabled and USB Legacy Support is enabled if applicable.

save and exit BIOS.

hopefully the system will reinstall the drivers for your controllers and you'll get your USB ports back.

3 more replies

Don't know what to do!
I have experience problems with my computer for a while now, I find out that my ftsata2.sys is missing while I was searching for the answer to my problem. 3 days ago I was able to connect my iPod, regular camera, and even my build in camera/microphone and everything was working fine, suddenly my camera/microphone stop working and after that everything else that I plug to my USB doesn't work. I check everything and the Device Manager and did everything that Google and other forums suggested but nothing is working. I'm using Windows XP Home Edition SP3.The funny thing is that my wireless mouse is working fine!. I know that I need to reinstall my ftsata2.sys but I have no access to my information to do a backup! can someone please help?

More replies

unknown device problem  error code 29   now am facing an unknown device problem  , my pc detects my 2 gamepads (joysticks) but says device not recogonised  error code 29  ...  but other usb input devices working well  like usb keyboard ,mouse, ppendrives. i used to play with these  gamepads without any probelm !   i tried everything uninstalled and reinstalled usb controllers , tried system restore and now i just did a clean install of windows 7  and downloaded all the drivers from hp ..  but the problem still exists !!   hp wnt provide advanced option on bios  right ? so how can i findout my usb support is enabled or not !!!      pls help me

A:unknown device error code 29

2 more replies

I have a HP630 notebook with windows 7 Home Basic OS. I upgraded it to windows 7 premium and downloaded all the drivers. These driveres were installed properly. My laptop was working fine until recently. Now the webcam is not working. Whenever, I open Skype, my webcam does not turn on and an error message is shown ' Webcam is Off. If you have integrated webcam, turn it ON'. Secondly, I noticed that device manager shows " unknown device" in USB devices. When I checked for it error code it indicates " windows has stopped this device (error code 43). I feel that stopping of webcam and unknown device error are two issues which are related to the webcam malfunctioning. I remember that webcam was working OK earlier. My question is how to solve this problem.

A:Solved: unknown device error

10 more replies

Hi. I got a new PC last week and have been putting all my software and hardware on it little by little every day.
I havent been using the PC a lot though, other than to get it all up and running.
It has Windows XP.
Anyway, for the past 2 days in a row I started to use it... and when I would leave it running and be away from the desk for a few hours, I would come back to find a message that Windows has experianced a serious error and do I want to report it to Microsoft. So, I do of course. And the error info I get is that it is an unknown device driver. How can I find out whats causing this?
I ran Windows Update and updated ALL the critical updates and driver updates.
I also thought it could be the system standby mode since it seems to be happening when the PC has been idle for long periods.
Is there a known problem with standby affecting device drivers?
I have no idea where to begin on this. I am new to XP.
Thanks

A:Unknown device driver error/XP

14 more replies

unknown device problem  error code 29   now am facing an unknown device problem  , my pc detects my 2 gamepads (joysticks) but says device not recogonised  error code 29  ...  but other usb input devices working well  like usb keyboard ,mouse, ppendrives. i used to play with these  gamepads without any probelm !   i tried everything uninstalled and reinstalled usb controllers , tried system restore and now i just did a clean install of windows 7  and downloaded all the drivers from hp ..  but the problem still exists !!   hp wnt provide advanced option on bios  right ? so how can i findout my usb support is enabled or not !!!      pls help me

More replies

I'm having issues getting my USB ports to work. They're definitely getting power but not registering any USB device being plugged in. I've checked in the Device Manager and I see two UNKNOWN DEVICE messages with ERROR CODE 43..."Windows has stopped this device because it has reported problems. (Code 43)".
I've tried full shutdown and battery removal...failed.

Uninstalled each USB root hub from the device manager then restarted computer for full auto re-install...failed.

Can anybody help me with this issue by chance? Would be greatly appreciated.

A:Solved: Error 43 USB Unknown Device

After attempting a few more possibilities for my issue, I have already found my problem and how to repair it...The entire USB port is shot. It's dead, nonusable. I'm either going to have to get a whole new motherboard or a USB PCI card.

1 more replies

I recently upgraded to Windows 10 on my Dell Inspiron E1505 laptop from Windows 7. After updating, I'm unable to check on updates. I get:

There were some problems installing updates, but we'll try again later. If you keep seeing this and want to search the web or contact support for information, this may help: (0x8007042c)

Looking online, I find this has something to do with the firewall. I tried the following as suggested, but it did not resolve my problem:

C:\Users\Rob\Documents>sc config MpsSvc start= auto
[SC] ChangeServiceConfig SUCCESS

C:\Users\Rob\Documents>sc config KeyIso start= auto
[SC] ChangeServiceConfig SUCCESS

C:\Users\Rob\Documents>sc config BFE start= auto
[SC] ChangeServiceConfig SUCCESS

C:\Users\Rob\Documents>sc config FwcAgent start= auto
[SC] OpenService FAILED 1060:

The specified service does not exist as an installed service.
C:\Users\Rob\Documents>net stop MpsSvc
The Windows Firewall service is stopping.
The Windows Firewall service was stopped successfully.
C:\Users\Rob\Documents>net start MpsSvc
The Windows Firewall service is starting.
The Windows Firewall service was started successfully.
C:\Users\Rob\Documents>net stop KeyIso
The following services are dependent on the CNG Key Isolation service.
Stopping the CNG Key Isolation service will also stop these services.

Wired AutoConfig
Extensible Authentication Protocol

Do you want to continue this operation? (Y/N) [N]: y
The Wired AutoConfig service is stoppin... Read more

More replies

Hello everyone. I have Windows Vista Home Pre. All had been going fine then this problem arrived. When I boot up my computer...I get an "Unknown Device" that pops up. Then Vista ask me to browse to find driver. Of course it can not find the driver and then closes. It also says windows could not resolve issue. This happens ever single time I start up my computer. Also when I go in device manager there is an unknown device sitting in there with a question mark next to it and says:* Windows Description - Unknown device* Hardware ID - LEGACY_SSDPSRVI also have another notification that says its unabale to detect:* Windows Description - Keyboard_Filter_01* Hardware ID - KeyboardFilter* Device Category (Class) - Other devices* Enumerator - {A87C2E0F-9A46-46b8-8EC4-E33355FBE1F7}I have run Kapersky Anti Virus, Webroot Spysweeper, and Antivira....no results on fixing it. Thanks in advance. Hijacklog is included.MrFLogfile of Trend Micro HijackThis v2.0.2Scan saved at 11:04:40 PM, on 12/13/2007Platform: Windows Vista (WinNT 6.00.1904)MSIE: Internet Explorer v7.00 (7.00.6000.16546)Boot mode: NormalRunning processes:C:\Windows\Explorer.EXEC:\Windows\system32\Dwm.exeC:\Windows\system32\taskeng.exeC:\Program Files\Synaptics\SynTP\SynTPEnh.exeC:\Program Files\Java\jre1.6.0_02\bin\jusched.exeC:\Program Files\Hewlett-Packard\HP Wireless Assistant\WiFiMsg.exeC:\Program Files&... Read more

A:Help Trojan Removal Help/unknown Device Error

Welcome to BC

Sorry for the delay, the forum has been extremely busy lately.

Since its been a few days, please post a fresh HIjackthis log. Thanks.

1 more replies

I have a Dell Studio 1737 Laptop that ran fine and had no errors. The integrated web cam also worked
fine. After upgrading to Windows 7 64 bit from Windows Vista 64 bit I have a error in the device manager.

The error listing shows unknown device, and the says "Windows has stopped this device because it has reported problems. (Code 43)". I believe the error is due to the wrong driver. I think the unknown device
is the web cam, since there is no device manager listing. To verify it, I unplugged the web cam ribbon cable from the motherboard, and the bad entry...and error disappeared from the device manger, indicating all was fine now. On plugging the cable back in, the error returned.

I don't believe there is a hardware problem with the web cam, as it worked fine, prior to the upgrade.
I can find no "creative labs integrated webcam" 64 bit driver for windows 7 on dells website, or anywhere
for that matter. I tried using the vista 64 bit driver with compatibility settings, and it still didn't work.
I tried deleting, rescanning, rebooting, tried other incorrect drivers, on the device dozens of times with no luck. I've had a lot of experience dealing with device manager problems, but now I'm stuck.

Anyone have a Driver for Win 7 64 bit, or know any other ideas to try? Dells Driver listing for Win 7 64 bit
gives no listing for web cam.

Thanks,

Eric

More replies

First of all sorryif this causes trouble
I am currently having trouble installing any keyboard it was working fine a few hours ago now im getting error 43 the keyboard is a multimedia keyboard

More replies

I am in power management
which device setting am I supposed to turn off to try first
This is a Samsung 7 series Chronos win 8.1 to help encase I need further assistance
Thank you

More replies

On an athlon 1900 + xp, could overheating of the cpu, which causes the computer to re-boot, give me an "unknown device driver" error message on re-boot? I have checked and re-checked every driver and can't find an issue there. I have ordered a heavy duty cpu cooler to see if that helps.

A:Could overheating cpu cause unknown device driver error?

8 more replies

Hello

I am by no means an expert, but I am the kind of person that likes to explore all my own options before seeking help. Now is the time I ask for it lol.

About a month ago, I started getting BSOD's, and random, constant reboots.

The BSOD would say: IRQL Not less than equal, but with no program or filename.

The Error reports would say either: "Error caused by Unknow Device Driver"

OR/AND:

"Error caused by Video Adapter Driver"

Now, I have tried reformatting a lot...I have installed new drivers for my monitor, mouse, everything I can get hold of.

I tried to install new drivers for my graphics card, but that didnt help, so i bought a newer model, and still no cigar.

This is my system specs:

Operating System System Model
Windows XP Professional Service Pack 2 (build 2600) Enclosure Type: Desktop
Processor a Main Circuit Board b
1.53 gigahertz AMD Athlon XP
128 kilobyte primary memory cache
256 kilobyte secondary memory cache Board: Gigabyte Technology Co., LTD 7DXR 1.x
Bus Clock: 133 megahertz
BIOS: Award Software International, Inc. 6.00 PG 07/13/2001
Drives Memory Modules c,d
120.02 Gigabytes Usable Hard Drive Capacity
112.24 Gigabytes Hard Drive Free Space

PHILIPS DVD8421 [CD-ROM drive]
PIONEER DVD-ROM DVD-114 [CD-ROM drive]
TEAC FD-05PUW USB Device [Floppy drive]

MDT MD1200AB-00DBA3 [Hard drive] (120.03 GB) -- drive 0 1024 Megabytes Installed Memory

A:Error caused by Unknown Device Driver

I was going to quote your question, but it's to long...

Random reboots or Blue screens are a sign that something is wrong as you have reinstalled and changed what you thought was the problem, the video card, then your fault lies elsewhere.

Try removing one of the memory sticks, they can cause errors if one is faulty, if the error occurs, try the other stick, also look at temperature of the board, is the CPU running to hot, is there sufficient cooling for the board, etc.

Remove all items except the video card and 1 stick of memory and work upwards until you get the reboot, as you have changed the video card you know it's not this, unless the motherboard has a fault somewhere in the AGP controller.

Jud

3 more replies

can someone take a looksee and tell me what this is?

More replies

I upgraded to Windows 10 a while back. Every time I open the computer I get a pop-up notification telling me the USB device is unrecognized. I have no USB devices in any of my 3 USB ports.
I sent my computer in twice. No help. They just uninstalled everything and reinstalled everything and told me it should be fixed. It is not. I then went about updating every driver in my Device Manager. I uninstalled the Unknown USB Device and then updated
other drivers. Certain drivers (such as PCI Express Root Port #3 - 9C14) when updating would also reinstall the Unknown USB Device, which I would then uninstall and keep working down the list. At the end of updating EVERYTHING I scanned for hardware changes
and "found" the Unknown USB Device.
From what I can tell, and I know very little about this stuff, my computer can't name one of my USB ports. Since it can't figure out what it's called it can't download the proper driver for it. Since it can't download the proper driver it can't work properly.
The practical result from this is that one of my three USB ports does nothing when I put in any USB item (connect my android phone, thumb drive, presentation clicker, etc).
I've looked on tons of forums. My current thought is that if I can tell my computer what the deice is or download the right driver and tell my computer to use that driver for this device it should solve my issue. But I don't know how to know what the name
of the USB port should be (I imagine it woul... Read more

More replies

When I connect usb cable from my Motorola W230 to access the memory card it connects and then vanishes and then appears the message that the usb device was not recognized, I have all the drivers installed but not working dfe all.
Before formatting my pc it worked!
When I go to device management I see the message: unknown device (error 43).
I want an urgent solution please!

A:Phone's memory card unknown device (error 43)

When you formatted your hard drive, did you change operating systems? If yes, what did you have?

2 more replies

Receiving this error on a Windows 10 machine. I've uninstalled/installed from the device manager. Disabled/Enabled from device manager. Windows says drivers are up to date. Same message from multiple thumb drives. It's only doing it on the front USB port. Not the ones in the back of the computer. Stumped.

A:Unknown USB device (link in compliance mode) error message

3 more replies

Our school currently has 800+ Probook 640 G2s and I've been repairing them but starting to come across a trend. The device won't come on AT ALL. I've replaced motherboard, power button board, tried different battery both in and out, reseated ram and tried the other location, different SSD and power supplies. I've almost built a new one a few times. We sent one off for them to repair at Depot so I could figure out what I'm doing wrong and the repair sheet came back with 3 parts. 845847-601 System Board (I know what this is obviously even if that part number doesn't match anything for the laptop). 846867-001 Hardware, HDD Bracket / Screw / ODD Bracket / Smart846868-001 Hardware, HDD Bracket / Screw / ODD Bracket / Smart The two above parts however I don't know what they are. Our machines have SSDs in them and there's no bracket. It plugs straight into the MB and 1 screw holds it down. I've tried the part searcher and it finds nothing (not even for the system board number). If anyone has any ideas it would be MUCH appreciated.

More replies

Hi HP Support, I've recently been given a laptop to fix, the hard drive needs replacing, but I need to enter the BIOS and can't as the password is long forgotten. Is there any chance I can get a hand  resetting the password? Cheers! Toby

A:Unknown BIOS password on ProBook 430 G3

Hi, Unfortunately,  business machines such as Probooks or Elitebooks have more stringent security than consumer models - they don't produce 'halt codes', the password cannot be derived from the Serial No. and the code is stored in non-volatile memory so removing the RTC cell will not reset the password in this case. If you Contact HP Business support they should be able to send you a customised SMC.bin file which you can use at boot to reset the password. Regards, DP-K

4 more replies

OK i have a problem

After a fresh Windows 7 x64 installation and installing all possible device drivers, I still had an Unknown driverless device left.

Pretty much everything I could get from the device manager wasPort_#0001.Hub_#0006

I use i7 920 on Pt6 asus MB.

Windows update did not know anything about this mysterious device, and i am confident this Unknown Device is reason for Blue screen and Win7 crashes

A:PT6 Windows 7 Unknown Device

Quote: Originally Posted by Vem

OK i have a problem

After a fresh Windows 7 x64 installation and installing all possible device drivers, I still had an Unknown driverless device left.

Pretty much everything I could get from the device manager wasPort_#0001.Hub_#0006

I use i7 920 on Pt6 asus MB.

Windows update did not know anything about this mysterious device, and i am confident this Unknown Device is reason for Blue screen and Win7 crashes

If you go to the unknown device and right click>details>hardware ID's (see pic). Copy the hardware ID and google them. that will tell you who makes the device. You can then go to the mfr website and get the driver.

Let us know if you need help

Ken

2 more replies

Hello,
I just did a fresh install Windows 7 and installed all updates and drivers. Although, I noticed an unknown device in Device Mamager. It's an Intel(R) ICH10 LPC - 3A18 Interface Controller as written in properties. I installed every damn thing about it (actually the Intel_ChipsetInf_V9111014_XPVistaWin7), but it seems that I'm missing something. Also, so far system is running smoothly, but I want to be sure that no harm will be done from this issue. Any ideas why it's marked as unknown all the time?

Any help is appreciated...

Motherboard: Asus P5Q SE
Video card: Nvidia GeForce 9600GT

A:Solved: Unknown device in Windows 7

Have you run Windows Update? Do so manually and check the optional updates once he scan is done, there should be an ASUS ACPI driver listed, install that and see if it clears the error. The driver is also posted on the ASUS site under I think utilities for many motherboards.

3 more replies

Hi everyone,

Thanks,

Gurinder Hans

A:Windows 8 unknown device found

I would take the ISO download and make a bootable DVD with it.

What software did you use to put the ISO on a bootable USB drive?

10 more replies

After almost 2 years of near flawless performance, my aging computer is giving me some trouble. Orginally a Windows 98 IBM Aptiva 600mhz PII, 64 meg, 20 gig; I have added another 128 meg, an 80 gig WD as slave with only my massive music collection and upgraded to Win 2K (that's when it became near flawless, before that it was a P.O.S.)

Here's the problem, somewhat randomly, my computer just locks up. Control+Alt+Delete does nothing and the mouse pointer is stuck. The only way to recover is to turn it off manually on the tower.

Usually when this occurs, there is some kind of distortion in the display. Sometimes, somewhere between 2/3 and 3/4 of my screen will turn a solid color, usually green, sometimes I can still use my mouse and run programs when this happens, but again the only way to get things back to normal is to restart. Sometimes when it completely locks up, some of the screen looks like it has shifted to one side, with some distortion in the colors.

I went to PC Pitstop and their test showed that I have a disabled device, the device was labeled as "error code 28". My device manager shows no problems. When I went to MS.com, I found that the 28 code refers to a driver issue, but I have no idea what driver is giving me problems. I don't know if this is related, but who knows?

Anyway, thanks for taking the time to read my lengthy post and I would appreciate any responses.

Thanks,
KC

A:Hanging, unknown disabled device? windows 2K

15 more replies

Running Windows 10 v1607 x64 on all (+/- 300) our Dell E5550 laptops. We notice that on all systems there is an Unknown Device present in devicemanager.
Hardware-id: ACPI\VEN_INT&DEV_33A0
Searching this ID it looks like i am missing the Intel(R) Smart Connect driver, however i cannot find this driver on the Dell website for Windows 10. Can anyone help me out with this please? Thank you!!

A:Dell E5550, Windows 10, Unknown Device

Greetings SummaSTJO,
There's a Smart Connect driver listed under Windows 8.1 on our page. We sometimes recommend you simply try the previous OS version driver and see if it works for you. If the installer doesn't work the raw files are included in the package in case you want to manually install it through device manager.
Deployment of the driver is beyond my scope and you likely know more about that than me.
Here's the 8.1 driver: www.dell.com/.../DriversDetails

1 more replies

Hi, I am using HP ProBook 450 G2 and OS is Windows 7 Professional 64-bit. I need the following drivers. PCI Device PCI\VEN_10EC&DEV_5227&SUBSYS_2248103C&REV_01PCI\VEN_10EC&DEV_5227&SUBSYS_2248103CPCI\VEN_10EC&DEV_5227&CC_FF0000PCI\VEN_10EC&DEV_5227&CC_FF00  Universal Serial Bus (USB) Controller Driver PCI\VEN_8086&DEV_9CB1&SUBSYS_2248103C&REV_03PCI\VEN_8086&DEV_9CB1&SUBSYS_2248103CPCI\VEN_8086&DEV_9CB1&CC_0C0330PCI\VEN_8086&DEV_9CB1&CC_0C03

A:HP ProBook 450 G2 PCI Device & Universal Serial Bus (USB) Co...

Hi: You need these drivers for those devices... The Realtek USB and PCIe Media Card Reader Drivers enable the integrated media card slot in supported notebook models running a supported operating system. ftp://ftp.hp.com/pub/softpaq/sp71001-71500/sp71064.exe This package contains the Intel USB 3.0 Driver for Intel 8 and U/Y Series Products for supported notebook models running a supported operating system. ftp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69862.exe

1 more replies

G'day all.

I have an A600 (Vista original) which I recently installed to Windows 7 Professional 32 bit (reformat/reinstall). I was careful with the order of installation. All is fine except the inbuilt camera does not work and there is an unknown PCI Simple Communications controller listed in device manage. Undoubtedly the two are linked.

I have tried reloading the chipset drivers to no avail. The unknown device is PCI bus 0, device 3, function 0. Is there any way of determining what this device is so I can track down the missing driver?

A:Portege A600 - Unknown device after Windows 7 installation

Hi buddy,

Can you post the vendor and device ID of this unknown device? This would be useful to identify it.
=> [How to identify an unknown device (e.g. Wireless LAN module)?|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

But PCI communications controller could mean the webcam? In your case I would try installing the webcam driver from official Toshiba website. After the installation you should be able to start the webcam software and use the webcam.

6 more replies

I am in the process of configuring a new HP Z820 workstation. This thing is a beast and absolutely love the power. Just recently I started getting a strange device connection sound playing at login/startup. Just after the windows start up chime I hear the second device connect sound.
I have nothing connected differently than I did a few days ago but all of a sudden this morning I now hear it. No USB HD's or flash drives connected.

I was just wondering if anyone knew of a way to figure out what Windows was connecting at login? Heard Event viewer mentioned somewhere but no idea how to use this or where to look.

Any suggestions would be appreciated.

Thanks,
Toby

A:Unknown device connect at Windows 7 login/startup

Go to start and type msconfig or use a program called whatsinstartup - here....

1 more replies

I have a dv7-2170us laptop.I performed a clean install with Windows 7 Home Premium 64-bit.I used the drivers for this laptop model from the HP site.I'm getting a few unknown devices in Device Manager.I've tried un-installing the devices and re-installing to allow Windows to re-detect but no drivers are found.  See pictures below, what devices could these possibly be referring to? I have all the necessary drivers loaded that I am aware of and I installed any driver that looked valid from the HP drivers site.

Solved!
View Solution.

A:Unknown devices in Windows 7 device manager - dv7-2170us

EDIT: Everything works!  Thanks for the tip Daniel.  I googled how to identify hardware id's and came up with this site http://www.pcidatabase.com/ , punched in the device id's and bam, it WAS the card reader.  Weird because it was working perfectly.  But I downloaded the driver anyway and re-installed and this resolved the issue.  ============================================= I tried the Intel Chipset Utility, didn't work. Here's the hardware id's though:  If you look closely you'll notice that each of these devices are in fact different.

10 more replies

I get this message every time i login ,im not sure what device windows would be referring to. This is a new message iv been receiving ,i cant recall any new devices that i know of.

A:Windows needs to install driver software for your unknown device?

go to control panel
system
device mgr
look for a yellow mark..see if it has a desription of the device

3 more replies

Hi.  I want to Know what are these device name so i can download driver for them. : Unknow device 1.  ACPI\HPQ6007\3&11583659&1 2.  ACPI\INT33A0\0

Solved!
View Solution.

A:Any driver for Unknown Device in Windows 10 : ACPI\HPQ6007\3...

Hi: You need these drivers for those devices... 6007: This package provides HP 3D DriveGuard Software (HP ProtectSmart Hard Drive Protection) for supported notebook models that are running a supported operating system. HP 3D DriveGuard Software protects the hard drive by parking the heads if the notebook is accidentally dropped, or is abruptly impacted by another object. File name: sp71811.exe INT33A0: This package provides the Intel Smart Connect Technology driver forsupported notebook models running a supported operating system. TheIntel Smart Connect Technology driver enables the system to resumefrom sleep mode and update supported web applications such asemail. The system enters sleep after the update is completed. File name: sp65233.exe

5 more replies

I've been working on a friends Dell Inspiron mini 1011. Initially She could not get onto he wireless network.
She had someone else get rid of malware on it. I'm not sure what they did, but there were three devices in
Device Manager- including the wireless card- that were not installed.
One device was marked unknown and is the only one I cannot figure out after looking through Dell's
driver page using servicetag. The device Instance ID is ACPI\CPL0002\2&DABA3FF&0. Looking at its
properties, I see it has a status code 1. Microsoft says "This is very common with universal serial bus (USB) and Institute of Electrical and Electronics Engineering (IEEE) 1394 composite devices...." The System Information tool > components > Problem Devices shows nothing.
Google revealed it is most commonly fixed by installing smart battery or battery meter software. No luck with that. It MAY be bluetooth- BT is enabled in BIOS. WIDCOMM software does not detect a BT device.
I'm including setupapi log as an attachment

A:Windows XP unknown device Dell Inspiron mini 1011

You have to find out the device you recently attached to your computer. Under what category is it in the device manager? Specify this and I may find you the drivers that may help you solve the problem. Also state your motherboard model

2 more replies

Hi, I have a Dell XPS 15Z, which I bought off a friend. They recently updated to Windows 8 and so now thats what I have. But when i go into my drivers its telling me that i have an unknown driver. no solutions online have answered my questions though some came close. So, this is what i know:
Unknown Device
Device Type: Other devices
Manufacturer: Unknown
Location: on PCI Express Root Complex
Hardware Ids:
ACPI\VEN_SMO&DEV_8800
ACPI\SMO8800
*SMO8800

i don't know if this is related but my laptop also wont charge. I just bought a new AC Adapter to replace the one i had, and it still isn't charging. The light blinks red 4-5 times and blue/green once. ive searched online to see what the problem is but i cannot do some of the fixes as the computer is at 0% battery.

A:XPS 15Z Windows 8 Unknown Device located on PCI Express Root Complex

From the hardware IDs that is the free fall sensor:

6 more replies

I just completed a Windows 7 Home Premium clean install on my Fujitsu Lifebook. Everything seems to be running fine, except that in the Device Manager I am seeing two "Unknown Device" icons under "Other Devices". I'm trying to identify what these are, and if I need to install drivers for them. The Hardware Ids codes are: ACPI\FUJ02B1 and ACPI\FUJ02E3. Grateful to anyone who can help identify them, and point to where I can safely download drivers.

* Just a note that the Windows "Update Driver Software" tool didn't turn up anything for these. Also, I downloaded the entire driver pack from Fujitsu for my machine, but I don't know how to identify which driver I need. - Thanks.

A:Unknown Device driver identificaiton on Windows 7 clean install

Hi Welcome to Seven Forums ... You need the Fujitsu System Extension and the Driver above it .. You can get them from the Link below

Fujitsu America - Support

3 more replies

hie i have just installed window 7 and this devices are missing, any help will be very much appreciated.
base system device
device id
PCI\VEN_1217&DEV_7110&SUBSYS_117C10&PEV_00
PCI\VEN_1217&DEV_7110&SUBSYS_117C10CF
PCI\VEN_1217&DEV_7110&CC_088000
PCI\VEN_1217&DEV_7110&CC_0880

UNKNOWN DEVICE
LOCATION; INTEL(R) 82801 DBM LPC INTERFACE CONTROLLER-24CC
HARDWARE ID;
ACP1\FUJO2BI
FUJO2BI

VIDEO CONTROLLER
LOCATION; PCI bus 0 device 2 function 1
HARDWARE ID
PCI\VEN 8086&DEV_3582&SUBSYS_120E10CF&REV_02
My laptop is FUJITSU-BIBLO MG13D

A:base system device, video controller and unknown device missing

4 more replies

hello all. i dont come around to this site very often but i desperately need you guys help.

im trying to get a gamebridge i purchased a few days ago to work. the first day i had everything going according to plan and had it installed on there and everything, but then i was having problems with it... it wouldnt show my game screen. so i decided to install to a new usb drive.

i took the device out and tried to reinstall to another drive but it didnt work... and now when i try to put it back into the original drive it gave me an error. so i went into device manager and unistall the device manually from the original drive.

but now i try to install it again to any drive it give me the code 28 error...

A:USB drive not properly installing device(GAMEBRIDGE). (unknown device code 28)

8 more replies

Please help me out i can't find my bluetooth hardware listed in device manager and also in devices. how can i solve this issue please guide as soon as possible and please be sure your answer must be right as i need it to be solved as soon as possible

A:i can't find bluetooth in my hp probook 5320m in device mana...

Hi I would consider As an adminstrator, in a Command Prompt Window, typegetmacThis will list MAC addresses for those items that are present, and may not be connected.A good number would be 3,1 x Ethernet1 x Wi-Fi1 x Bluetoothand then typeipconfigand in the long list look for named devices have a matching MAC address.Along with Device manager this is a way to determine the number of devices. Device Manager has a VIEW: Show hidden devices, and it may be in there.

Happy 2 [email protected]

1 more replies

i made a clean install for windows 7 ultimate x64 and i've just realised that the hp drivers support page dose not has any drivers for the ultimate version, so i downloaded the proffesional drivers, now i have all devices are installed except  two devices named base system device, and i see the two bottoms of the wifi disable\enable and quick web are not lighting anymore after this install, the quick web bottom is not functional, and the wifi light is always off, please help me

A:HP probook 4530s missing base system device

Hi: I can help you with the Base System Device driver...You need to go to the support page and install the JMicron card reader driver listed under the Storage drivers section.

1 more replies

Hi everybody.

I just bought myself a Powercolor Radeon HD 4890 yesterday. After installing the card and the required drivers everything works like a charm. However, every time I start up my PC I get a message saying that a new device has been found on my system. On checking Device Manager I found an "Unknown device" entry under "Other devices".

I'm attaching a screenshot of Device Manager.

Are there any drivers I'm missing? It only happened after removing my old card (after uninstalling all its drivers) and installing the Radeon.

Any help is greatly appreciated.

Thanks.

A:Unknown Device In Device Manager After Installing Radeon HD 4890

I have a Powercolor Radeon HD 4890 (I also have a Gigabyte 4890 and XFX 4890 in two other PCs). I think you need to install the latest ATI Catalyst Suite. You may have installed the driver only package. Anyway, I think it has to do with the HDMI capabilities of the card. High def sound is built into the card (the HD part of the card name) and the HD sound driver is part of the Catalyst Suite. When you use an HDMI cable to an appropriate display, HD sound is also transmitted through the same cable from the Radeon graphics card.

Of course, be sure to install .NET Framework 2.0 as it is required before you can install the full Catalyst Suite. The HD sound driver won't install without it. At least I had trouble before I installed .NET 3.5. I went to Windows Update and installed .NET Framework 3.5. 2.0 is included in that update and 2.0 wasn't available separately.

24 more replies

applied.

Sorry that last word didn't get in the subject line.

So:
http://i.imgur.com/QoSy2wX.png

These two values are:
USB\VID_0CF3&PID_3000&REV_0200
USB\VID_0CF3&PID_3000
My bios info

http://i.imgur.com/FvPQweZ.png
So should I do this:

ASUSTeK Computer Inc.-Forum- driver missing
When I download that zip file from under "Install the Bluetooth driver:" it has so many files to choose from.... I don't know what to do?

I've also found out that I need to disable "boot from network" or "boot from lan" in bios to get rid of this unkown device issue?

A:Unknown device in device manager after Bios default settings are

Well it might be a good idea to look at the following tutorial:

Device Manager - Finding Unknown Devices

Use the link in Step 7

Also I tend to find this tool useful:

Right click on each result in the list for more options.

Edit: On my machine a similarly named device appears to be a webcam.

In the list USB Composite Device doesn't mean much but matching the ID seems to indicate that it's the webcam.

4 more replies

A:Unknown Device in Device Manager/Show Hidden Devices

Hi there ... You should Install the chipset Driver and also the Realtek Driver for your card Reader ... From the Toshiba website ... The Link is provided below

2 more replies

How do i figure out what driver or even component windows wants software for when in the device manager under other devices it lists an unknown device and windows update cannot find anything.

Oh and is it appropriate for me to use this topic to ask another question regarding explorer.exe as while i am inside a folder i delete (by choosing delete from the context menu in the tree view) while inside that folder on this particular laptop PC explorer. always crashes, collect information, sends it and restarts explorer. I have not experienced this problem on any other pc running any version of windows 7, oh and the same happened with build 7264 x32 and the current install of build 7600 x64.

A:Device Manager reports Unknown Device & explorer crash

Please fill up the System specs...

1 more replies

Hello,
I recently put together a new computer, and in the process of of installing the USB 3.0 connector from the front of my GX500 case, I either bent numerous pins on the motherboard USB 3.0 header or the motherboard shipped that way and I inadvertently made matters worse. Anyway, that header on the motherboard is without a doubt unusable.
Since I don't really need the USB 3.0 functionality, I bought a USB 3.0 -> 2.0 adapter cable, connected one end to the connector on the front of the case and the other end into the USB 2.0/1.1 header on the motherboard. Unfortunately, when Windows 7 boots and I plug a device into the front ports of the case, Windows detects the front USB ports as "Unknown Device" within Device Manager yet says the driver is successfully installed. I've already downloaded the most current Intel chipset drivers for my motherboard, deleted and reinstalled all USB drivers, and all rear USB connections are working perfectly fine - it's just the two front ports that are connected from the case to the USB 2.0/1.1 ports via the adapter cable.  I've tried both USB 2.0/1.1 headers on the motherboard, and I've tried plugging in several devices to the front USB ports, and this problem still persists.
I've ensured the connection inside the case is solid, yet I cannot get Windows to recognize the front USB ports.  However, I have confirmed that power is being sent to the front ports because it charges my phone when I connect it to the front USB ports via m... Read more

A:Front USB Ports not Working - "Unknown Device" in Device Manager

If your motherboard has a 1x pcie slot you can get a card like this...

Here

Some motherboards it's a tight fit because of the video card taking up space. In that case you can relocate the above card with this...

Here

6 more replies