Tech Problem Aggregator

Malwarebytes giving C++ error, where to ask?

Q: Malwarebytes giving C++ error, where to ask?

I am, or rather my friend who I set this up for, is running windows 7 sp 1 on a MacBook Pro, circa 2008/9. It's been running great until he lent the system to a friend who immediately got Monkey-Pak virus into it.

I managed to clear it out, but now I can't get MalwareBytes 2.x running, it gives me some kind of c++ error. I've reinstalled all of the run times all the way back to the 2005 version, but this may be a virus that targets that program and makes it fail to run.

The program actually starts, it's just when you try to run a scan or update the database when I get this error:

Any ideas?

A: Malwarebytes giving C++ error, where to ask?

Quote: Originally Posted by XweAponX


I am, or rather my friend who I set this up for, is running windows 7 sp 1 on a MacBook Pro, circa 2008/9. It's been running great until he lent the system to a friend who immediately got Monkey-Pak virus into it.

I managed to clear it out, but now I can't get MalwareBytes 2.x running, it gives me some kind of c++ error. I've reinstalled all of the run times all the way back to the 2005 version, but this may be a virus that targets that program and makes it fail to run.

The program actually starts, it's just when you try to run a scan or update the database when I get this error:

Attachment 329257

Any ideas?


See if the link below helps;

https://forums.malwarebytes.org/inde...otfix-for-139/

1 more replies
Answer Match 71.4%
A:cant update malwarebytes giving run time error 732(0 0)

You may find this link useful :http://www.malwarebytes.org/forums/index.p...=19175&st=0

6 more replies
Answer Match 57.96%

 
 
So, I know that svchost.exe when not in system32 is bad thing, but I don't really know what to do in this situation. This usually pops up when I am just browsing anywhere, and nothing to me is being blocked.  The IP is from Luxembourg?  Another forum told me that it belonged to sokroveno, a Warez site, but I've never been there.
 
I have run the svchost.exe through VirusTotal, bytehero found "Trojan.Win32.Heur.Gen", nothing else turned up anything.I have the standard Windows Firewall running.

A:Malwarebytes keeps giving me "website blocked" warning

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps in the order listed.===Your log is clean.Malwarebyte is working well, If you are seeing a message each time it blocks an IP, you can disable that action.To disable the popups1. Open Malwarebytes2. Click on the Protection tab3. Uncheck/untick the last item"Show tooltip balloon when malicious website is blocked"4. Click the exit button rather than the X at the top right to close the window.How is the computer running now?

2 more replies
Answer Match 57.54%

Hello, I am pretty new here, and so I apologize if this has been discussed before.
 
For some reason, after Malwarebytes Anti-Malware finishes a scan and finds some infected files, it only presents me with a screen with a "Finish" button instead of a screen with a "Remove" button (as it did in the past).  Then after pressing "Finish", it takes me right back to the "Scan Now" page to offer to perform another scan all over again.
 
Has anybody seen this before, and how can I get to the screen where I can remove the infected files?  In most cases, they are just PUP files.
 
Thank you!
Gary

A:Why Isn't Malwarebytes Giving an Option to Remove Infected Files?

What types of threats is it finding?In addition to malicious software detection and removal, Malwarebytes Anti-Malware also detects and deals with two classes of non-malware...these are Potentially Unwanted Programs (PUPs) and Potentially Unwanted Modifcations (PUM)s. The default setting for detected PUPs is to "Warn user about detections". Malwarebytes will not automatically remove these detections unless you reconfigure (change) the default Non-Malware Protection settings to "Treat detections as malware".Read the Malwarebytes User Guide: Non-Malware Protection for information and applicable settings found under the Detection and Protection section.

3 more replies
Answer Match 57.54%

malwarebytes Anti-Malware giving malicious web message on email outgoing server when i try to send email. -it shows my outgoing server as the malicious site
 
on inbound giving me same message showing the following:
 
57504
inbound
C:\\windows/system32/svchost.exe
also refers to an i.p. address 
ingoing & outgoing email all of a sudden.giving me malicious website message pop-ups. the trail is getting ready to run out.
 
running trial version malwarebytes Anti-Malware and use microsoft security essentials
anyone know what this could be?
 
Malicious Website Blocked
Domain - (references my outbound email server)
I.P. address they give just takes you to Malwarebytes for information
Port: references a port number
Type:Outbound
C://ProgramFiles(*86)MicrosoftOffice\Office\14OUTLOOK.EXE
 
CAN SOMEONE HELP?
tHANK YOU!
DO I HAVE A VIRUS
????
 

A:malwarebytes Anti-Malware giving malicious web message

Hello LuAnne123 and  Yes - the severely limited information you provided does likely point to a malware infection. I recommend following the advice from the topic: Available Assistance for Possibly Infected Computers and have one of the Malware Removal Experts assist you with your issue.If you would like to get off to a very fast start, the Malware Removal Experts would appreciate it if you would also attach (not copy/paste) both the FRST.txt and the Addition.txt output diagnostic reports from only Log Set 1 into your new topic. Please do not tick, nor untick, any pre-configured FRST categories. If you wish to remain in the BleepingComputer community, please carefully read the 3rd pinned topic in this "Security" section, and then post the required information within the 1st pinned topic in this section.Thank you.

1 more replies
Answer Match 47.88%

I recently noticed that the system was trying to do 7 updates every day at closedown, and found that update was giving a return code of 800736b3.

I have run SURT several times, and it doesn't seem to give any results (or should I be looking somewhere else?).

I ran sfc /scannow and extracted the results and they are in sfcdetails.txt (attached). SFC said there were some files it couldn't fix, even though sfcdetails.txt says it has fixed all of them.

CBS.zip is much too big to upload using the paperclip - is there another way?

I tried restoring to an earlier restore point, and unfortunately all the attempted updates have flushed my list of restore points - and the oldest few all give me a return code of x00000022.

Not sure if this is one problem or two...! I am reluctant to do a System Recovery as it sounds pretty drastic - help would be much appreciated!

PS Is any more info required?

A:Windows update giving return code 800736b3; restores giving x00000022

The only errors in SFC are these...

Code:
2015-06-14 21:41:16, Info CSI 000005e7 [SR] Repairing 1 components
2015-06-14 21:41:16, Info CSI 000005e8 [SR] Beginning Verify and Repair transaction
2015-06-14 21:41:16, Info CSI 000005ea [SR] Cannot repair member file [l:24{12}]"utc.app.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18839, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-06-14 21:41:16, Info CSI 000005ec [SR] Cannot repair member file [l:66{33}]"telemetry.ASM-WindowsDefault.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18839, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
...which are caused by an MS update which they messed up the file-coding on and may get around to fixing sometime.
It's not critical, but you could get rid of it by uninstalling KB3022345 and/or KB3068708 and hiding the latter when it reappers in your offered updates list.

Please post the C:\Windows\Logs\CBS\CheckSUR.log and C:\Windows\Logs\CheckSUR.Persist.log files.

7 more replies
Answer Match 45.78%

Ok the dial up connection on this computer won't connect to anything. Everytime i try to dial it say error 633. This error means that the port was busy. I tried to look up what microsoft has to say about this but everything they told me was desgned for windows 95 or 98. Not a thing for xp. I followed the instructions anyway and couldn't find any of the files they direccted me at. Does anyone have an idea?
 

A:Modem Giving Error 633

6 more replies
Answer Match 45.78%

Hi all,

Sometimes when I access movie25.ws, sometimes it gives 502 error or 522 error. Is there any issue with my internet connection or there is some problem in their servers ?

A:movie25.ws is giving 522 error

That would be on their end. IT is up for me right now.

You can check a site by entering the URL here: http://www.downforeveryoneorjustme.com/

3 more replies
Answer Match 45.78%

whenever I turn my computer on, it gives me this error. When I close the window, it reappears after 5 seconds. please help
 

A:xp giving error continously

this file is associated with Nero scout, if you do not use scout on a regualr basis for the purpose of nero scout, remove the service, error will stop and free up some resources

start , run, type services.msc
go down list of prgrams till you see nmindexing and right click on it then click properties
look for 'startup type' us the droip down box and change to disabled then click apply
now click the stop button, after the service stops, click OK at bottom and exit services
should be OK now
 

3 more replies
Answer Match 45.78%

What I did was I drag a network folder to My Briefcase on the desktop and it was updating. But then after awhile it stop and gave me this error.

"Briefcase cannot directly work with databases created by a previous version of the microsoft jet database engine. Use the conversion feature in your application to convert the database to the current version."

Has anyone ran into this problem before?
I took a screen shot of that error. Look at the attachment below.
 

A:My briefcase is giving me an error.

Bump!
 

2 more replies
Answer Match 45.78%

when i am trying to open task manager by ALT+CTRL+DEL, nothing happens.
but when i try opening it with run>taskmgr it gives me error
"Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item."

I have tried gpedit.msc method. but there it shows "not configured" in front of "ALT+CTRL+DEL".

Pls help me. IS there any method to fix this problem.

i am using Win XP pro SP3.

A:Taskmgr.exe giving error

Last time this happened to me it was caused by malware. Use one of the many good malware removers (I use Malwarebytes) and do full scan, deleting anything it finds. Reboot and test.

1 more replies
Answer Match 45.78%

Recently my IE 6 has been randomly crashing for no apparent reason. The error message that comes up, before asking me to terminate the program, reads as follows:

The instruction at "0x017f1ea8" referenced memory at "0x017f1ea8". The memory could not be "read".
This all began very randomly and I'm not sure how to fix it. Can anyone help?

Thanks!
 

A:IE 6 giving strange error

13 more replies
Answer Match 45.36%

Please help Windows 7 crash
If someone could please try and help me fix this or just start over.

Ok I have a emachine e725 running windows 7 32bit and a acer running on windows vista. My emachine recently crashed in the blue screen and I tried to complete a system restore. I was able to get through the advanced boot menu and use the repair your computer option to restore windows. During the windows setup process I got another blue screen and the computer restarting. It then started the process over and once it got to the step that says windows is preparing setup, it gives an error msg saying something along the lines of windows was interupted and needs to restart to complete installation, and it has an option to press ok. This cycle continues and I can not open in safe mode because it says "windows can not complete the installation in safemode. Also the option to repair your computer in the advanced menu options is no longer available. So after wrestling with windows starting up I decided to create a back up and restore disc on my acer for my windows 7 computer. I tried putting it on a disc but it would not boot. So I tried creating a installation disc of windows 7 and tried booting from the cdrom drive. Once I did that I got a error msg saying "device driver not found: MSCD001 No valid cdrom device drivers selected. It then gives me the A:\>. Im not sure if I created the disc wrong since I cant unzip the entire file I downloaded with needing an encryption pas... Read more

A:windows 7 giving error mscd001

Genuine Windows? 7 Home Premium
Platform Intel? Pentium? mobile processor T3400/T4200 (1 MB L2 cache, 2.16/2 GHz, 667/800 MHz FSB, 35 W), supporting Intel? 64 architecture
Mobile Intel? GL40 Express Chipset
802.11b/g Wi-Fi CERTIFIED? network connection
System memory Dual-channel DDR2 SDRAM support
Up to 2 GB of DDR2 667 MHz memory, upgradeable to 4 GB using two soDIMM modules
Display 15.6" HD 1366 x 768 pixel resolution, high-brightness (220-nit), TFT LCD
16:9 aspect ratio
Graphics Mobile Intel? GL40 Express Chipset with integrated 3D graphics, featuring Intel? Graphics Media Accelerator 4500M (Intel? GMA 4500M with up to 1759 MB of Intel? Dynamic Video Memory Technology 5.0 (64 MB of dedicated video memory, up to 1695 MB of shared system memory), supporting Microsoft? DirectX? 10
Dual independent display support
16.7 million colors
MPEG-2/DVD decoding
WMV9 (VC-1) decoding
Audio High-definition audio support with two built-in stereo speakers
MS-Sound compatible
Storage 160/250/320/500 GB or larger hard disk drive
5-in-1 card reader, supporting Secure Digital? (SD), MultiMediaCard (MMC), Memory Stick? (MS), Memory Stick PRO? (MS PRO), xD-Picture Card? (xD)
Optical media drive 8X DVD-Super Multi double-layer drive
DVD/CD-RW combo drive
Communication Video conference: Integrated webcam, 0.3-megapixel resolution, featuring enhanced technology for low-light environments
WLAN: 802.11b/g Wi-Fi CERTIFIED? network connection
LAN: 10/100 Mbps Fast Ethernet, Wake-on-LAN ready
Dimen... Read more

1 more replies
Answer Match 45.36%

I've been having prblems with IE for months, I'm currently using Maxthon but I prefer IE. But It's too frustrating! I'm at my wits end! Help!

I finally found my Error Log, it was way too long to include so heres the most recent:

Monday, November 15, 2004 Applicatio n Error Faulting application iexplore.exe, version 6.0.2900.2180, faulting module browseui.dll, version 6.0.2900.2518, fault address 0x00019265.
Monday, November 15, 2004 Applicatio n Error Faulting application setup.exe, version 1.0.0.2, faulting module setup.exe, version 1.0.0.2, fault address 0x00002a85.
Monday, November 15, 2004 Applicatio n Error Faulting application setup.exe, version 1.0.0.2, faulting module setup.exe, version 1.0.0.2, fault address 0x00002a85.
Monday, November 15, 2004 Applicatio n Error Faulting application drwtsn32.exe, version 5.1.2600.0, faulting module dbghelp.dll, version 5.1.2600.2180, fault address 0x0001295d.
Monday, November 15, 2004 Applicatio n Error Faulting application setup.exe, version 1.0.0.2, faulting module setup.exe, version 1.0.0.2, fault address 0x00002a85.
Monday, November 15, 2004 Applicatio n Error Fault bucket 143714374.
Sunday, December 05, 2004 Applicatio n Error Faulting application helpctr.exe, version 5.1.2600.2180, faulting module mshtmled.dll, version 6.0.2900.2180, fault address 0x00030785.
Monday, December 06, 2004 Applicatio n Error Faulting application iexplore.exe, version 6.0.2900.2180, faulting module browseui.dll, ver... Read more

A:IE keeps crashing and giving me Error Messages

Hi jstaring...
I'm not entirely sure exactly what could be causing those errors...Knowing Windows, it could be anything. I do have a couple of suggestions, however.

1) http://www.gpsoft.com.au/DScripts/Download.asp <-- this is the homepage of a truly fantastic replacement for Windows Explorer, (file management) which in my experience is a lot more stable as well...You might want to check it out, as it is also a lot more configurable than the standard Explorer as well.

2) Unless you need Internet Explorer for something specific, I can't encourage you strongly enough to go and download Firefox from http://www.mozilla.org/products/firefox/ It's faster, more stable, and a whole lot more secure than IE, and in 98% of cases reads Web pages equally well. It is also extremely extensible, with support for advanced download management, RSS feeds directly from bookmarks, and a number of other great things.

If you still need Internet Explorer (a corporate intranet which has DirectX, for example) about the only thing I can suggest is reinstalling Windows. There are just too many possible problems with Windows and IE to be able to have any idea as to what is causing the problem. If you can though, get the two programs mentioned above. I think you will find them tremendously helpful.
 

2 more replies
Answer Match 45.36%

 Ah__4146XxDmMCP6Fl_wB9JcE3W_-qJYH2T3eBQX62Gq.jpg   68.44KB
  1 downloads
 
hey guys, i have samsung laptop RV515 , its only giving error 16 on screen whenever i start my computer getting no option to do anything but only error 16 , my recent activities are .... i installed android x 86 in it it installed successfully n worked 
       the only thing it shows is error 16  n whenever i restart its says system resuming...

A:Computer Just giving Error 16 on startup

Please guys i beg u to help me.....i eally need my computer     
HELP:ASAP

9 more replies
Answer Match 45.36%

Hi so when I go to boot up my laptop it is say"Non-System disk or disk errorReplace and strike any key when ready"I don't know how to fix this and I am trying to factory reset but it won't load anything when I spam F11

More replies
Answer Match 45.36%

when i turn the computer on it gives me the cooling system air and stays up for about 30seconds then shuts down

More replies
Answer Match 45.36%

Anytime I load a CD on to my CD-ROM drive including during start up if a CD is in the drive I get a dreaded blue screen with a WINDOWS message....
Fatal Exception 0E has occured at 0028:00000004
Application will be terminated blah blah blah
I have this drive set up as my master and I checked all of the hardware settings and everything says it's working properly but as soon as I put a CD in (audio or Data)... crash.
Any help would be greatly appreciated.
Thank you.
 

A:CD-ROM Drive giving Fatal OE Error

closing duplicate,

view this thread

http://forums.techguy.org/showthread.php?threadid=52717
 

1 more replies
Answer Match 45.36%

I have a access sample database with table A and table B.
I am trying to delete any records in table A with a matching [TicketDeliverNo] field in table B
and if [AmtPaid] field in table B >1.
I have a sub proc on the forms 'close event’ that will trigger a sql clauses to delete the records in table A.
However, I’m getting a syntax error in the SQL statement, so the error states. I tried to no avail to fix it.
Any help is highly appreciated,
Private Sub Form_Close()
Dim strSQL As String
strSQL = "DELETE tblA.*" & _
"FROM tblA" & _
"Where tblA.[TicketDeliverNo] = tblB.[TicketDeliverNo]" & _
"And tblB.[AmtPaid]>1;"
DoCmd.RunSQL strSQL
DoCmd.Close acForm, "FRMB"
End Sub

Thank You boaterjohn
 

A:Solved: sql in access vba giving error

12 more replies
Answer Match 45.36%

i try to install a few programs and when i try to install it i keep getting low disk space or data1.cab file error.
but i have 766 mb ram and a 40 gig hard drive thats brand new and has nothing but windows on it.

im running windows xp pro. on a p4 1.8g with 40 gig hdd. its a dell gx 260

ive done a few up grades to it and im put ram in it a while ago to make it go faster but it has increased speed for a while but ive been getting alot of errors. I dont know if its a problem with my ram or if i didnt install my windows correctly. ive used the same ex cd on about 4 other computers and never get these problems just this one.

please i am going crazy with it and i need to know if its a software issue or a hard ware issue

More replies
Answer Match 45.36%

Running DISM because sfc failed. DISM is telling me the operation failed that either the repair source was not found or the component store cannot be repaired.

Any ideas?

Thanks!

Rob

A:DISM Giving 0x800f081f Error

Any ideas?



Try this batch file---
Download it & right click it & choose Properties & Unblock it & right click it & choose Run as administrator---

dism.bat

Takes about 2 hours to finish.

It should look similar to this unless your computer is really messed up---

4 more replies
Answer Match 45.36%
Answer Match 45.36%

Hi,

My IE gives error when we click that X mark. Please let me know how to avoid the same.

A:Giving error on closing window...

What does the error message say?

Which version of IE are you using?

Is Windows up to date with service packs and MS updates?

1 more replies
Answer Match 45.36%

Before I post I'd like to say sorry if this is the wrong forum to post this in.

I recently started having problems with my computer due to a virus or malware. I have run multiple spyware, and adware removal programs (Mcafee, Spybot search and destroy, AVG, Avira, adaware) most of which have detected things but could not fix. Mcafee has detected a wide range of stuff and has attempted to fix them whether or not that worked remains to be seen (see below for Mcafee log). I belive the virus or malware might have been successfully removed from the computer thanks to Mcafee but the registry is still messed up. Every time I open a program whether Firefox, or Spybot Searchand Destroy I get the bad image error message which forces me to hit ok as it attempts to load the program and any dependency's it may require. Spybot search & Destroy has not been able to load it's GUI at all. I've tried uninstalling and reinstalling it. I've tried running it in safe mode too. The process loads but no GUI pops up. The Spybot resident shield loads fine though.

Here is my hijackthis log

Quote:




Logfile of HijackThis v1.99.1
Scan saved at 10:11:50 PM, on 7/18/2009
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16850)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.e... Read more

A:Computer keeps giving bad image error

Hello and welcome to TSF.

HijackThis is no longer the preferred initial analysis tool in this forum.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

1 more replies
Answer Match 45.36%

Hi I have one of the small computers and all of a sudden I started getting this code everytime I start up my computer. It just keeps popping up over and over again. "Setup error: failed to load resources from resource file please check your setup" I am not sure what to check and even if I tried it is difficult to do anything since this error will not stop popping up ever second. This computer was a gift. It is a Asus EEE PC 701SD with Windows XP. I do not know much about computers but if there is something I can do to attempt to fix it I would like to try. I do not have anything important saved on it so if I need to wipe everything off I do not mind that either. I was going to try to restart it fresh, but usually a computer has a recover disk for that and this one does not even have a rom drive with it. Any help would be appreciated.

Thanks you
 

A:Computer keeps giving setup error over and over again

According to this manual you insert the Support DVD into an external USB optical drive, and one of the features is a "comprehensive recovery solution that quickly restores your system to its original working state."

If you don't have the Support DVD maybe you can purchase one from Asus.
 

1 more replies
Answer Match 45.36%

I am trying install Microsoft Security Essentials on my computer having windows 7 64

bit version.everytime i try to install it the setup stuck and finally gives error.

A:Trying to install MSE.Giving error message

Try WDO first:
What is Windows Defender Offline?

9 more replies
Answer Match 45.36%

well it started yesterday i was doing a check disc and it froze for a hour so i turned it off with the button for power on/off and tried to restart and since then it keeps giving me a error now saying " a disc read error has occured please press crt,alt,del to restart" and i cant get passed the screen. ive tried several time and nothing yet.
thanks ahead of time for any info that might help.
 

A:cpu wont start keeps giving error

8 more replies
Answer Match 45.36%

Hai team

I am facing problem while starting my Machine every time it start i tis giving a error message DMIAPI32.dll was not found.
 

A:Solved: DMIAPI32.dll is giving Error

6 more replies
Answer Match 45.36%

Hello TSF.

When I booted up my computer I saw that all 32-Bits software will give this error.
Internet Explorer 64-Bit and Photoshop 64-Bit works.


Quote:




The application was unable to start correctly (0xc0000142). Click OK to close the application.




Is there some way to fix this?
Thanks.

OS: Windows 7 Professional (64-bit)

A:W7 64-Bit. 32-bit software giving 0xc0000142 error.

I've solved this! :D

Don't remember the command I used though. :(
some systemfix command in cmd.

1 more replies
Answer Match 45.36%

Hi, I have Lenovo E520, and he say: "Fan error".  I buy new fan, mount it, and the mistake is still here.... It is something wrong on motherboard? Thank you for you reply and sorry for my english....

More replies
Answer Match 45.36%

Hi, I have Lenovo E520, and he say: "Fan error".  I buy new fan, mount it, and the mistake is still here.... It is something wrong on motherboard? Thank you for you reply and sorry for my english....

More replies
Answer Match 45.36%

The Oki data that I'm working with Is giving me trouble.
No matter what I do it keeps on giving the Y sensor error.
Any suggestions?
Oh and thanks in advance.:wave:
 

A:Oki Data Giving me a Y Sensor Error

Oh the Oki data I'm working on is a C5150
 

2 more replies
Answer Match 45.36%

Hi,
I am currently learning all about CMD and the code for it. I saw that to change your IP address, you can type in ipconfig /release in the command prompt, then after that ipconfig /renew to get a new ip address. I tried the ipconfig /release, and everything worked fine, but when I did ipconfig /renew, I got this error:

"No operation can be performed on Local Area Connection while it has its media disconnected"

Could you help me on how to renew my ip address???

A:ipconfig /renew giving error!

Solved: IP address issue - Tech Support Guy Forums

3 more replies
Answer Match 45.36%

Hello,

I wanted to know about dll files and thereby solving my problem. I installed a software in windows 8.1. When I started it, it quit saying certain dll files not found. So are dll files present in windows installation or are they installed by the software. I tried by downloading these files and pasting into installation directory. I could not find all of them. Even if I get all the required dll files, will this method solve the problem. (sfc command gave negative result, malware check also gave negative result). Since I understand dll files to be for windows based systems, is there any site by microsoft which provides all these files.

Thanks,
Emma Good.

A:Installed software in Win 8.1 giving dll error

Most software comes with dll files specific to the application. They must also be compatible with the OS. There is a way to force dll registration with regsvr32 command but again the dll(s) must be compatible. The dll(s) normally has to go in the System32 or SysWOW64 folder.

It would help to know what software you are trying to install. The installer should do everything automatically. Have you tried installing using compatibility mode?

14 more replies
Answer Match 44.94%

Opera Browser closing after giving me this error.-


The instruction at "0X67ae4bb9" referenced memory at "0x00000000".
The memory could not be "written"

Click on OK to terminate the program.
Click on cancel to debug the program.

When i click ok or cancel both close Opera Browser.

This message just seems to occur on certain websites load.

What is wrong and how I can prevent this from happening ?

Thank you.

A:Opera Browser closing after giving me this error

are you using the latest version of opera

Version
11.00

Build
1156

i had the same problem with ver. 9 and 10 but this one i have had no problems with

1 more replies
Answer Match 44.94%

wHEN MY COMPUTER BOOTS IT GETS TO MY MAIN SCRREN AND THE MICROSOFT OFFICE 12 INSTALL KEEPS POPPING UP TO BE INSTALLED, OR RATHER FINISH BEING INSTALLED. I TRY TO REMOVE IT FROM ADD/REMOVE PROGRAMS BUT IT SAYS THAT IT IS ALREADY IN PROGRESS OF BEING INSTALLED. THEN MY SCREEN GOES BLUE AND GIVES ME THE ERROR THAT I MAY NEED TO REMOVE OR FINISH INSTALLING NEWLY INSTALLED SOFTWARE? hOW CAN I FIX THIS PROBLEM.

A:My Computer Is Giving A Blue Error Screen What Do I Do?

Please turn the caps. lock off. I assume you have Office on your computer. Try restarting your computer and after the loading screen start tapping the F8 key and go into safemode. try uninstalling it through Add/Remove programs there, then reboot
Mark

1 more replies
Answer Match 44.94%

Well, I've got another stumper for the community here. This time, it's my windows 7 ultimate x64 laptop. During a routine starting up of Windows, the startup process halted and rebooted the whole computer. It will constantly loop unless you press the "startup repair" button, which gives instructions to boot from the setup DVD. This screen also gives the error 0xc000000e at the bottom accompanied by the message "The Boot Selection Failed Because A Required Device Is Inaccessible".

At this point, I hadn't shut down the computer for several days. Here's a list of things I could think of that had changed between now and the last successful boot that could have caused a problem:

- Updated Malwarebytes' (requested a reboot)
- Updated Windows Live Writer
- Installed potential malware (this one seems like a likely candidate for catastrophic problems to me)

After this, I immediately gave safemode a try and found I could boot up okay that way, so I ran a full scan in malwarebytes of all my partitions. It found 40somethin' results, but all except for one were false positives, and the one that it did find was in the recycle bin or something. Nevertheless, I cleansed the one file, rebooted, still no fix.

Next, I busted out the setup DVD to do one of its startup repairs. The first time I ran it, it said something about fixing a disk something or another and something else about it taking possibly over an hour. After five minutes of Hard drive activity, it ... Read more

More replies
Answer Match 44.94%

I had a power supply go kaput, then a friend had one kicking around so i tried that ..no go.. leads were too short BUT i did use it for checking... and started getting HDD errors ... So I got a new power supply got that one in, and NOW I get stupid write protect errors to drive c .?? thats a new one to me..... im not liking the idea that the power supply failure took out the HD partition..

Now I am racking my brains here tryin to figure out WHY this system thinks drive c is write protected? Power up, its reading both HDs.. boots up to scandisk (cause it wasnt shut down properly grrrrrrrrr) , then dies at ---write protect error drive c unable to write to drive c---
Anyone have any suggestions?

[Edited by kim515no2 on 05-16-2001 at 09:11 AM]
 

A:Drive C is giving write protect error

12 more replies
Answer Match 44.94%

Recently I turned on my desktop. Like normal, the first screen that appeared was the ASRock screen(see picture 1). After that a completely black screen with the text: "MBR Error 1 Press any key to boot from floppy..." appeared(see picture 2). I've read on how to fix this and they all say insert windows 7 disk. When the computer boots and the ASRock screen appears(see picture 1), if i click F11 it will bring me to the boot menu(see picture 3). The boot menu has 3 drives(i think they're drives at least), if i click either of the first two drives it brings me to the MBR Error 1 screen, but if i click the third screen it shows the windows screen and then the log in screen. I've looked in UEFI settings thinking i can change which drive it boots from but it only shows the first two drives(see picture 4). Can anyone explain to me what is going on. Also, how to fix it where it logs on automatically without having to go through the boot menu? Sorry for any confusion in my post or anything unclear. Any help would be much appreciated! Thanks all in advance.

More replies
Answer Match 44.94%

I've been trying to update Security Essentials now for a couple weeks and I keep getting the following error message:

I am running Win7 64. What is causing this error and how do I fix it?

I haven't updated Win7 in quite some time, perhaps that's it?

I didn't want to do all of the updates to keep getting notifications/pushes to upgrade to Win10 - I don't want it and want to stay on Win7.

Thanks.

A:Security Essentials is giving error when trying to update

Hi:

Yes, the fact that you have not updated Windows with important security patches for "quite some time" may be contributing to your problem.

The free upgrade offer from Win7 to Win10 ended months ago.
There are no more "GWX" reminders.
So there is currently no solid reason to refuse important security patches for Windows and your other MS software (e.g. MS Office).
If you are missing one or more months worth of security updates, your system is vulnerable.

As a general principle (with rare exceptions), one should install at least ALL "critical" and "important" SECURITY updates.
The decision to install "Recommended" and "Optional" patches, especially those that are not security-related, is up to the user. You'll need to read the descriptions of each available patch to determine if it applies to or might be needed for your system.

I do not use MSE.
So I cannot help specifically with the error message you report.
But, for starters, I would suggest running Windows Update manual checks and installing ALL available "Critical" and "Important" SECURITY updates.
It may have to be done in batches, depending on how many of them you are missing.
In other words, do not try to install 20 or 30 security patches all at once.
I suggest leaving ".NET framework" patches for last.

And you will need to reboot several times during the process, when prompted.
It's a good idea NOT to use the computer for... Read more

3 more replies
Answer Match 44.94%

I can't believe that I am getting error messages that cause the screen to refresh itself and lose my tooltray items.

Please see the attached file that has all the infomation on it.

Thank you all in advance!

A:New install on SSD is giving me Explorer error messages

That is very normal if explorer.exe crashes and automatically restarts.
Please do in Elevated Command Prompt

Code:
sfc/scannow
Post results.

9 more replies
Answer Match 44.94%

NoScript has been acting a bit strange for me for the past couple days, jsut recenlty when it updated.I am hoping its just a bug in NoScript's updating but an error I received with Tumblr just now has scared me. It said there was "suspicious account activity" and that I should redo my password. It was a-okay because it WAS from tumblr and I have since contacted Tumblr for supportanywayshere is the error message. please note that i do not and have not clicked on any suspicious links recentlyim sorry for typos and whatnot, i am panicking real bad Any help is greatly appreciated, thank you!

More replies
Answer Match 44.94%

hi all

i have a hp pavilion desktop
i had a floppy drive in it that got wrecked so i removed it and threw it away now every time i turn on my computer (at boot) i get a drive A ERROR and i have to pres f2 to continue its annoying
so does anyone have any ideas of fixing or removing this problem without having to insert a new floppy drive


thank you
 

A:Computer beeping and giving me drive A error

You have to press F2 o continue?
So it must also say F1 to get into Bios on the same screen

Just hold down F1 key after you first turn on the computer, then locate 1.44Meg Floppy, and disable it, then save and exit Bios settings.

What happened to your Toshiba Laptop issue and MSI Motherboard issue?
You seem to be going through these computers
I've already quoted you the HP support thread, so if you have any further issues always look there first, or H E R E basically.

Note: Older Compaq computers may use the F1, F2, F10, F11 or Del key to give access to BIOS.

I can't wait for your next thread, will it be, "how do I find my manual?" or something bizarre like that?
I think with 73 posts it's really time to update your Profile with your System Specs, don't you feel?
It will save saying what you have all the time on every new thread. Oh and try to put HP Pavilion plus Model Number, it helps support to support you better
Pretty sure you'll be back with another question sometime
 

3 more replies
Answer Match 44.94%

Checked email, Then a couple minutes after I closed the window a friend said he'd just emailed the new specs on a project we've been working on. So I reopened outlook, and right after it opens to a normal screen it switches over to large text that in a format that can't be navigated easily with this message at the bottom:


"It looks like you may be using an unsupported browser. For the best Outlook experience on the web, the latest version of a modern browser is recommended. Please see System requirements for Office for more details and a list of supported browsers."

Have same issue with cyberfox (64 bit version of firefox) and seamonkey. One minute workig fine on hotmail/outlook, next minute out of date?
eamonkey and cyberfox are same version as firefox latest firefox,(fresh installs yesterday) which has no problem (so far) IE version is 11

I do not have any version of ms office installed, I use open office, and windows 10 was last updated Wednesday the 18th. with no other software installed.

Edit: just tried Edge, and same message and non-useable navigation.

A:outlook giving error message about office?

Oddly, it just fixed itself.
Checked this morning, then again at lunch with same message, just checked and everything is normal again.

1 more replies
Answer Match 44.94%

I have 12 critical updates (one of which will fix this gay CWS trojan i keep getting). Everytime I try to get them from MS I get a "this software has not passed windows xp logo testing, it will not be installed" message.

Any possible reason for this?
 

A:XP Home: Windows Update giving error

6 more replies
Answer Match 44.94%

I've been running win XP for a long time, than I started surfing a lot. I was told that I have a virus because I now get: This copy of Windows did not pass genuine validation. Is there a virus that can mess up your activation key? Is there any Doctors in the House?
I ran a Hijack This scan;
 

A:XP Giving error message (Genuine Validation)

6 more replies
Answer Match 44.94%

I have been on the HP forums and done all the suggested fixes such as plugging into a wall socket, no surge protector; did a hard reset; cleans the bulb. I believe my trouble started when I plugged psc into a smart surge protector that is shuts off the power to all but pc. It still doesn't work. I just bought a used HP 6500 but need to install through ethernet and modem/router, but don't know how to do that either. Probably needs to be a different post?
 

More replies
Answer Match 44.94%

First of all I thought I was computer literate.........
I use Microsoft Internet Explorer for the internet. I have no trouble connecting to the internet but when I do connect and am typing in an email adress (for example ebay.com) it will direct me to that address and after a few seconds of loading will redirect me to http://view.atdmt.com/AVE/iview/yhxxxanc0420000087ave/direct;wi.300;hi.250/01?1215657987822204

and then gives me this message:

Sorry we couldn't find http://view.atdmt.com/AVE/iview/yhxxxanc0420000087ave/direct%3Bwi.300%3Bhi.250/01%3F1215657987822204. Here are some related websites

Is this some kind of Spyware? Other similar questions from posts on your site seem to imply it is but if so, why didn't my antivirus/spyware protection catch it and how do I get rid of it. It does this over and over when trying to access all different kinds of sites and it is driving me mad!
 

A:redirecting me to other websites and giving atdmt error???!

10 more replies
Answer Match 44.94%

I've been trying to update Security Essentials now for a couple weeks and I keep getting the following error message:

I am running Win7 64. What is causing this error and how do I fix it?

I haven't updated Win7 in quite some time, perhaps that's it?

I didn't want to do all of the updates to keep getting notifications/pushes to upgrade to Win10 - I don't want it and want to stay on Win7.

Thanks.

More replies
Answer Match 44.94%

Error message:
 
Line 15807 (File "C:\Users\Downloads\adwcleaner_4.201.exe"):
 
Error: Subscript used on non-accessible variable.
 
 
 
This message appears during the "Generic search in progress ..." phase. After clicking ok, adwcleaner cuts out without finishing the scan. Anyone seen this error, know what's going on, or know a way around it?

A:adwcleaner_4.201 giving error when run, software fails

Hi FighterRanger AdwCleaner should be ran from the Desktop to avoid false positives and also to make sure that the program runs properly. Can you move the executable on the desktop, right-click on it and select Run as Administrator?

6 more replies
Answer Match 44.94%

i have installed the NFS carbon game and cracked as well but when i double click on the game link,a black page appears and then this comes ...... NFSC.exe has encountered a problem and needs to be closed.We are sorry for inconvenience........

the following files will be included in this error report:

C:\DOCUME~1\ADMINI~1\Temp\b500_appcompat.txt

please help me and inform me that what is the actual problem so i can play the game.thanks
 

A:NFS CARBON giving error report at startup

NFS carbon game and cracked as well

We do not assist with cracked/downloaded from torrent games
 

2 more replies
Answer Match 44.94%

Hello I am trying to create a restore point but I am getting this error

"The restore point could not be created for the following reason:

A writer did not respond to a GatherWriterStatus call. The writer may either have terminated or it may be stuck. check the system and application event logs for more information (0x80042319)

Please try again"

I did check the vssadmin list writers items option see the attached screenshot and everything is working fine.


Can someone be kind enough and please help me out to better understand the cause of this issue since I have never faced it before.

A:System Restore giving 0x80042319 error

This may helps for 0x80042319 error https://www.backupassist.com/support...ml?cshid=BA920

1 more replies
Answer Match 44.94%

i'm not sure exactly what it is, though i think it may be zlob, but here's my log

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:01:14 PM, on 10/19/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\windows\system\hpsysdrv.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\Program Files\WildTangent\DDC\DDCManager\DDCMan.exe
c:\Program Files\Norton AntiVirus\navapsvc.exe
C:\WINDOWS\system32\dla\tfswctrl.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\PROGRA~1\NORTON~1\navapw32.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\PROGRA~1\SYMANT~1\VPTray.exe
C:\Program Files\Java\jre1.5.0_08\bin\jusched.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\BitTorrent\bittorrent.exe
C:\WINDOWS\system32\fxssvc.exe
C:\Program Files\hp center\137903\Program\BackWeb-137903.exe
C:\Program Files\Vidalia Bundle\Pri... Read more

A:virus giving fake error messages

Welcome to TSG

Download Combofix and save it to your desktop.

**Note: It is important that it is saved directly to your desktop**

--------------------------------------------------------------------

1. Close any open browsers.

2. Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix.

--------------------------------------------------------------------

Double click on combofix.exe & follow the prompts.
When finished, it will produce a report for you.
Please post the "C:\ComboFix.txt" along with a new HijackThis log for further review.
Note:
Do not mouseclick combofix's window while it's running. That may cause it to stall
 

3 more replies
Answer Match 44.94%

HiI used to use a software link 10 years ago on a Windows 98 Operating System for a special effect to use with some music I had written and was recording. The software link is still available now but when I click the link, I get a HTTP 403 error. The exact webpage error is:-! The website declined to show the webpage HTTP 403Is this error happening because I am now using Windows Vista? and if so, I am right to assume that the software link will work if I use it with an old Windows 98 Operating System again the same as 10 years ago?The software webpage looks exactly the same now as it did 10 years ago.Hope you can help.ThanksDanny1234

A:10 Year Old Software giving HTTP 403 Error

What's the link so we can check it out?

6 more replies
Answer Match 44.94%

---------------------------
Microsoft Plus!
---------------------------
You must accept the End User License Agreement to use Microsoft Plus! for Windows XP.
---------------------------
OK
---------------------------

I get the above error message when I click on the exe of Microsoft Plus! and it does not start.
Its installation CD's setup.exe file has got corrupted and therefore I can't reinstall it.
Also that few days ago it was working very fine until I installed Microsoft Plus! Digital Media Edition which is till date working very fine.
Now I'm also unable to select the screensavers which are part of the Microsoft Plus! software like Plus! Aquarium, etc.
& on selecting the same, I get the same error message as above.
As such I'm facing a lot of problem as the screensavers, games and other utilities in this software are based on 3D Graphics which work well on my system

But someone Please help me soon to get rid of the above problem. PLEASE SOON!

THANKS.
 

A:[solved] Microsoft Plus! for Win XP is giving an error on being started!

6 more replies
Answer Match 44.94%

I just bought a cd-burner by Pacific Digital. It is an 8x8x32. I get these error messages when trying to write,
MEDIUM ERROR. Ihave no clue what this means. I also get this error message, DATA BUFFER UNDER-RUN. PLEASE WRITE AT A LOWER WRITING SPEED, But every other writing speed except for 2x gives me this error. I am trying to copy playstation games for my brother he gives me one of his games and I copy it for him incase he breaks the original. Whenever I try to copy the game CD to CD it doesn't work. Please help me out with this problem it is very annoying and can really make a person mad.
 

A:{RESOLVED} My CD burner keeps giving me error messages!

16 more replies
Answer Match 44.94%

I typed the following in the command prompt to certificate fingureprint(MD5):-
C:\>keytool -list -alias androiddebugkey -keystore Documents and Settings\srinivas.HOME-0FA0752F2F\.android \ debug.keystore -storepass android -keypass android

but it is showing error:-

keytool error: java.lang.RuntimeException: Usage error, and is not a legal command

Using MD5 I have to get apiKeys for Google Maps.

Any kind help will be appriceated

More replies
Answer Match 44.94%

I have an external hard drive 120G where I put most of my files, graphics, pictures and documents. I just discovered that it refused to open and the documents are inaccessible this drive contained a lot of my saved works especially pictures as I am into photography and I can not afford to these valuable files.Kindly assist.
 

More replies
Answer Match 44.94%

i am running windows 7 every time i try to check for updates i get "WindowsUpdate_80244010" "WindowsUpdate_dt000" message

A:windows wont update giving error

Check this : http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windowsupdate80073701-windowsupdatedt000/fd4dc146-f362-e011-8dfc-68b599b31bf5
Arnav Sharma | http://arnavsharma.net/ Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

2 more replies
Answer Match 44.94%

Hey all, i screwed up big. I have a 120 GB Maxtor Drive (6Y120P0) as a second drive used just for storage. I let it get too full. I think it got to 90% full. A big No No i know. I deleted as much as i could that it would let me. It was giving me all sorts of I/O Device Errors and was running real slow. I scanned the drive and defragmented it.

i bought an External Drive to copy everything over but with a lot of files(including my entire family picture album of my twins) it gives me the following error when i try to copy or access a file...F:\(name of directory) is not accessible. The request could not be performed because of an I/O device error.

Is there any software i can run to fix this? Any help would be very much appreciated. I have a lot of things backed up on DVDs but not all of it.
Ted
 

A:Hard Drive giving me I/O Device Error

7 more replies
Answer Match 44.94%

Hey guys,

I think I have tried everything. When I was installing windows onto the pc it kept restarting and giving blue screens. It stopped for a bit and then all of a sudden it wouldnt even let me turn on the computer again. Now its fine again.. but I feel like its going to do the same thing again. I am wondering if anyone can help out with the errors. I tried changing the memory and running mem test with no errors. I also used memory that worked fine in my other computer and the same errors still occured. I am thinking it could be power supply but I am not to sure. Someone has posted to upload mini dump so that you guys can see what the error is so I am going to upload it to the file . If anyone can help it would be greatly appreciated.

Thanks for your time
Justin
 

A:Computer Keeps restarting giving numerous error

Hello and welcome to Techspot.

Your minidumps are crashing with various problems, and bugchecks, including memory corruption.

I believe you have a ram problem.

Go HERE and follow the instructions.

Please let us know the results.

Regards Howard :wave: :wave:
 

7 more replies
Answer Match 44.94%

Typical, giving error of sshnas21.dll missing at the startup of my windows 7 ultimate.

I use MSE as anivirus, which caught it and declaired it has been removed. But, after reboot, its clear that its not gone, giving error of sshnas21.dll missing.

Currently I am scanning with MRT (Aug 2010) ....

Need expert opinion...

Please also inform if I should run sfc/scannow after the malware is caught.

A:Infected with Trojan horse giving known error

Try rebooting your computer into Safe Mode.
Run your anti-virus scanner AND malwarebytes
Let us know how that does.

6 more replies
Answer Match 44.52%

hi
i recently bought a toshiba c660 289 about a month ago.i got a BSOD once before but recently iv had instances were iv been getting 5 such incidences in a day!I`m starting to think google chrome might be the cause but i need an expert to clarify for me.i attached all the files as instructed.any help would be greatly appreciated

many thanks in advance

A:BSOD giving error driver irql not less or equal

Do you happen to have BitDefender installed?

7 more replies
Answer Match 44.52%

I found information to use to connect to a Wifi using the netsh command line.
http://www.hanselman.com/blog/HowToConnectToAWirelessWIFINetworkFromTheCommandLineInWindows7.aspx

I used this command to connect to Wifi and this SSID is not at my office , however it
still shows Connection request was completed successfully.
So whether the SSID is there or not it always returns connection request
was completed successfully.

I am trying to do is that if I am at home I connect to the WLAN if the
hardwire is not connected. I have it in my startup .

If you have any input I would appreciate it. Windows 10 must have done
something different

Windows 10 both profiles are in the system. I am at WORK and MywifiN2 is not available

netsh wlan connect name="MywifiN2" (trying to connect to the SSID not there) even if I use ssid="MywifiN2" same
Connection request was completed successfully.

netsh wlan connect name="MyWork"
Connection request was completed successfully.
(The wifi connects and no issues)
Wifi connects when I do this at home to the home network
netsh wlan connect name="MywifiN2"
if %ERRORLEVEL%==0 (
echo "Home wifi Connected."
) else (
echo "I am at work no wifi"
)
"Home wifi connected"
No matter what I always get the ERRORLEVEL to be 0 (successful), and it is connecting to the work
On Windows 7 it works fine
netsh wlan connect name="MywifiN2"
The network specified by p... Read more

More replies
Answer Match 44.52%

I have my MacBook Pro hooked up to the HP Photosmart C4280 printer I got for free when purchasing the laptop, and it has been this way for over a year. About a week ago, every time I'd try to print something, the following error message would pop up:

"Word cannot print due to a problem with the current printer. Make sure you have a printer selected in Print Center. You may need to print again or adjust your printer settings."

I'm guessing that a setting is off on my computer, because I tried printing with my roommate's printer (which also happens to be a Photosmart C4280) and received the same error message.

Can anyone help me?
 

A:HP Photosmart C4280 printer giving me error message

bump
 

1 more replies
Answer Match 44.52%

Hello,

I have a HP Desktop Windows 7 Professional 32-bit. I tried a new printer and hated it. I reinstalled my Lexmark X5070 and I am having trouble with the reinstall. The actual reinstall went well for the most part. When I try to print content from a website I get an error message.

"Enable Bidirectional Communications" settings in the printers properties dialog.

What to do?

Thanks,
Anne

A:Lexmark X5070 printer is giving me an error message.

Anne this is the driver for that printer. Personally from experience I think Lexmark are very heavy on inks as are Canons so I have gone a HP Officejet but if you are happy with the Lexmark then try that driver first.

9 more replies
Answer Match 44.52%

I'm not sure if I'm putting it in the right forum.
But anyways, here's my problem.


Problemereignisname: BlueScreen
Betriebsystemversion: 6.1.7601.2.1.0.768.3
Gebietsschema-ID: 1042

BCCode: 1000007e
BCP1: FFFFFFFFC0000094
BCP2: FFFFF88004B8A839
BCP3: FFFFF88006E47E78
BCP4: FFFFF88006E476D0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


I guess it's an ati VGA driver problem.
I've tried to reinstall all the drivers again,
but unfortunately the problem hasn't been solved.

I've attached the minidump files and a simple image of bluescreen lists.

Thanks alot.

Ps. It mostly, almost only happens while playing games, which raises the CPU (core) temps up to 75~80 C, if this could be one of the reasons, which looks unlikely as I use a laptop.

A:Computer crashing giving out an error BCcode 0x1000007e

Welcome to the Seven Forums, jscent.

This may be due to overclocking and reading about how to tackle this problem at Win7 Ultimate 64bit Blue Screen 0x3b, 0x1000007e,0xfc - Microsoft Answers may be of help.

Good luck.

1 more replies
Answer Match 44.52%

When trying to run the backup program, the program tries to run and then stops 10 seconds in, and gives this error code. What do I need to do to? Running Win 7 RC 7100 - x64 edition

More replies
Answer Match 44.52%

I had something go wrong with my laptop and i couldnt fix it so i restored it to factory state. I had finished the restoration and turned off my computer, completely ignoring the message about a fatal error, when trying to run sysprep. And whn i turned it
back on i had to redo the procces of restoring to factory.
I did some searching on how to fix the fatal error, this is what ive done so far:
Set the value ofGeneralizationState under
HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\SysprepStatus to7,
Set HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform\SkipRearm to 1
Deleting C:\Windows\System32\sysprep\Panther but when i run sysprep it just replaces the folder
Nothing has worked and im not sure where to go from here. PLEASE HELP!!!

More replies
Answer Match 44.52%

IM in need of help i have a HP Probook running windows 7 64bit. it was working fine for the passed 3months and yesterday out of nowhere it stopped working the internet is connected but the browser wont load pages it still shows im connected but it wont load. i Troubleshoot connection problems and it says this "Your computer appears to be correctly configured, but the device or resource (microsoft.com) is not responding. can anyone pls help? Ive tried CMD netsh winsock reset and nothing still same problem...i tried command prompt Netsh int ip reset and nothing either i restored the computer to an earlier time i did windows repair and nothinngg still same problem i ran out of options idk what to do plss help

A:Browser connection not working giving me error (microsoft.com)

Is Microsoft.com the site that doesn't work?
Please fill in your specs. It helps others to help you.

4 more replies
Answer Match 44.52%

Hi y'all,

I'm having trouble with Windows Update.
Since yesterday around noon, I have not been able to install the rest of the updates that the program said needed to be installed.

I turned my computer on, and WinUp said there were 25 updates ready to be installed. I clicked Install Updates and after a few minutes it said some updates weren't installed and gave me error code 80071A91. Only 8 updates installed (most having to do with .Net stuff) and the other 17 I have had no luck installing. The updates that haven't installed are in the screen shot I attached- at least I believe it attached

Anyway, I also noticed Cumulative Security Update for Internet Explorer 10 for Windows 7 Service Pack 1 for x64-based Systems (KB2879017) was "behaving" funny. I ran WinUp with only this update to install and it said it did install it. When I restarted, and reopened WinUp the update was not on the list. I tried installing the rest of the updates, and when they failed and I clicked on View Important Update, "Cumulative Security Update for Internet Explorer 10 for Windows 7 Service Pack 1 for x64-based Systems (KB2879017)" was back.

I'm not entirely sure what to do. I have done the following to try and fix:

1. Error checked Local Disk C. Tried WinUp, no luck.
2. Defragmented, then error checked again, and ran WinUp, no luck.
3. Did the command prompt sfc /scannow. Restarted. Ran WinUp, no luck.

Please help me. I thought I took very good care of my computer. ... Read more

A:Windows Update giving error code 80071A91

Hello Mavil3,

To get started, you need to follow these instructions:

Windows Update Posting Instructions

After you have posted all the information we need to troubleshoot, someone will get back to you shortly.

John

9 more replies
Answer Match 44.52%

Thank you for the wonderful work you do!

I scan my computer with Uniblue (kinda got misled into buying only one third of the program--grrr....). Everyday there are 2 messages that I receive 2 of each time. I only seem to be able to copy and paste one at a time, so here is one of them:

The value PackagePath in HKEY_CURRENT_USER/SOFTWARE/Microsoft/MediaPlayer/Services/MediaGuide contains an invalid path C:/Documents and Settings/Owner/Local Settings/Temporary Internet Files/Content.IE5/3BIA03RL/media_guide_16x16[1].png
I have no idea what this means. Uniblue keeps "fixing" it and then it's back the next day with another similar, but slightly different message. Does anyone know what this means?

Thanks in advance,

Smargie
 

A:scan results keep giving user error message

I forgot to add this info:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Celeron(R) M processor 1.60GHz, x86 Family 6 Model 13 Stepping 8
Processor Count: 1
RAM: 1015 Mb
Graphics Card: Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family, 128 Mb
Hard Drives: C: Total - 34357 MB, Free - 15038 MB;
Motherboard: Dell Inc., 0RJ272, , .9JT7WB1.CN7016669901UA.
Antivirus: Norton Security Suite, Updated: Yes, On-Demand Scanner: Enabled
 

1 more replies
Answer Match 44.52%

Hi,I have excel sheet which contains multiple rows for each country.The requirement is to split the file for each country and save with country name.I have got the below macro but when im trying to run it,getting error as label not defined.Please advise:
Sub CopyData()
Dim LMainWB As String
Dim LNewWB As String
Dim LRow As Integer
Dim LContinue As Boolean
Dim LColAMaster As String
Dim LColATest As String
Dim LWBCount As Integer
Dim LMsg As String
Dim LPath As String
Dim LFilename As String
Dim LColAValue As String

On Error GoTo Errorcatch

'Path to save all new workbooks to
LPath = "C:\Users\43693678\Documents\Split"

'Retrieve name of the workbook that contains the data
LMainWB = ActiveWorkbook.Name

'Initialize variables
LContinue = True
LRow = 2
LWBCount = 0

'Start comparing with cell A2
LColAMaster = "A2"

'Loop through all column A values until a blank cell is found
While LContinue = True

LRow = LRow + 1
LColATest = "A" & CStr(LRow)

'Found a blank cell, do not continue
If Len(Range(LColATest).Value) = 0 Then
LContinue = False
End If

'Value in column A
LColAValue = Range(LColAMaster).Value

'Found occurrence that did not match, copy data to new workbook
If LColAValue <> Range(LColATest).Value Then

'Copy headings
Range("A1:C1").Select
Selection.Copy

'Add new workbook and paste headings into new workbook
Workbooks.Add
LNewWB = ActiveWorkbook.Name
ActiveSheet.Paste
Rang... Read more

A:Solved: Macro giving error 'label not defined'

12 more replies
Answer Match 44.52%

Hi,

I have a new Acer Laptop with Vista Home Premium V6.0.

I am trying to record video images with a Mikomi AP7121U Webcam & Windows Movie Maker but getting error message "Import Video could not find a comaptible digital video device".

I know the webcam works on my laptop as I have tested it with other software & images show up, so it must be connected OK but wont work with Movie Maker ?!?!?

Any ideas would be great help.

Thanks

More replies
Answer Match 44.52%

Became daily This Error, please help me, I Do not Know What To Do ... Windows 7 64bit, 6GB Ram, i3 2.4 GHz Intel
 
sorry hair bad english, I'm using google translator.
 
tranks

A:Acer notebook giving error "BAD POOL HEADER"

Hey Consthantine,
The BSOD was caused by tcpip.sys which is Microsoft TCP/IP network related driver. There is a chance it is caused by 3rd party drivers on your machine. Do you have PC Tools Internet Security installed on your PC? If so uninstall it and see if the problem is fixed.

2 more replies
Answer Match 44.52%

Hi, I have a 16GB SanDisk microsdhc memory card that originally came with my android phone. I recently bought a new memory card for my phone and my intention was to use this 16GB in my android tablet to store music and other data files. At first, I was getting this 0x8007045D I/O error message for a couple songs/files as I was transferring files from both my laptop to the memory card via an adapter and also from the memory card onto my laptop. I googled the error, and saw many suggestions to reformat the memory card. I've done this before without any problems and I thought it was a good idea to start fresh for the tablet to have plenty of room to store its own app files as well. Unfortunately, now I cannot transfer any files to the memory card from the computer without receiving this 0x8007045D error. Is there any way to salvage this memory card? I've also read it could be the adapter, but I have several sdcard adapters lying around and my card produces the same error in all the adapters. If it's relevant, my laptop has Windows 7 64-bit operating system.
 

A:SD card is giving me an I/O error 0x8007045D and does not allow any files to copy

8 more replies
Answer Match 44.52%

I start Windows up (Version 5.1 [Build 2600.xpsp_sp2_gdr.080814-1233 : Service Pack 2])
and just after the loading screen I get this:

stop: c0000218 unknown hard error
unknown hard error

When trying to start in any other modes BUT safe mode I get:

Session3_Initialization_Failed
Stop: 0x000000006F (0x0000130, 0x00000000, 0x00000000, 0x00000000)

When in safe mode it informs me of the Paging File not having enough space. Tells me to manually change it. I do so, to no avail.

I was told this could be a hardware issue, such as the ram failing on me.
I had some older ram, I barely ever used it, as I quickly made the upgrade to 2GB instead, using this ram made no difference.

I fear a virus scan but safe mode won't let me INSTALL anything other than what I had, and at this point all I had was Malware's anti-malware. NOT a virus scan.

I do not own a copy of windows XP on CD.

Under computer management I got a few error messages.



The following boot-start or system-start driver(s) failed to load:
Beep
Fips
intelppm
OMCI



DCOM got error "This service cannot be started in Safe Mode " attempting to start the service EventSystem with arguments "" in order to run the server:
{1BE1F766-5536-11D1-B726-00C04FB926AF} ~~~~(I think this was my trying to install anti-virus software)~~~~



TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.


The Application Management servi... Read more

A:Error on startup. I did a good 7 hours research before giving in and asking for help.

If you can boot into safe mode try looking in C:\WINDOWS\Minidump for any dmp files and attach them to your next post. If there are any minidump files in there they can help us troubleshoot your issue.
 

3 more replies
Answer Match 44.1%

I´m using FRESHDOWNLOADS and getting an erro message like "access violation..."
It all happened after downloading a big file (aprox 2Gb of Fedora DVD iso)
and the cpu freezed when building the output file.
I waited, and next time I cheked the file was _._._ in the menu screen of fresh downloads in pause mode, I cheked under properties and it stated 100% downloaded, but when i double cliked on it it appeared an error message stating something like 'can't acces files' or something and kept eternely poping up windows with that error message ...

That completely stinks
This is the second time i have to download a file after it has stated 100% download completion

Other stinky part is there ins't any support by freshdevices or useful info on their site about how to solve this

I suppose it could be due to during the output build process deletes the partial files precocely!! At least it would be nice to keep them until the job is done, and the possibility of restart/continue the building output process

Any solutions/sugestions or other info would be apreciated
 

A:FRESH DOWNLOADS giving BIG problems (ouput file error)

I quit using Fresh a few years ago because I never could get it to DL large files. I personally use FlashGet 1.3. I know it's said to contain spyware by some programs but I've never found a better utility yet for DL'ing everything out there.
 

1 more replies
Answer Match 44.1%

Hi all,
I have a Toshiba USB flash drive. I have a problem when I using it on a win2000 sysem. It keeps poping up a warnning message saying I removed the drive. And then "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)". But it is just a standard drive so that does not make sense. Other USB drives have the same issue. I can sometimes get them to work for a bit before this happens. It is almost like I removed it. It also will just do this at random. It is working pops up the warning, then not, wait a few minutes and it is working and conencted again. I tried another ports and same issue. Other USB devices work fine though. The drives in question work fine on another machine.

Any ideas?

-GM
 

A:Solved: USB flash drive keeps giving error removed messages

9 more replies
Answer Match 44.1%

hello,

my old system with 2 RAID 0 disks crashed, now i've put a single disk in place. its in the harware compatibility list (hitachi deskstar 7K1000C). its connected on the SATA1 connector on the motherboard. no matter where i connect the disk or DVD drive on the MB, they are never in the first or second IDE slot. might this be because the system still expects the RAID 0 volume here? DVD is connected on SATA3.

when starting up, i get a black screen with blinking cursor, no text input possible. when starting up with the winXP64pro cd, it loads for some minutes and then hits me with the good-old blue screen with an 0x0000000A error, irql_not_less_or_equal.

my best guess is i have to delete the RAID volume first, but in my bios i have no RAID settings, and the RAID-setup screen (ctrl-I) i can' t get to before hitting an error.

its an ASUS P5W64 WS motherboard, American Megatrends v02.58 bios.

thanks in advance for looking in!

mike..
 

More replies
Answer Match 44.1%

This is my first post. I read through the post labeled :.....D:\ is not accessible. Incorrect function. and did everything people suggested there but I am still having the same problem except mine is a little different. I don't know if it is a hardware or software or driver or what the problem is.....

My external and internal burner have error
G (burner in the computer) & F (external burner) :\ is not accessible. Incorrect function. My other internal player works though. It plays music but I can't view pictures.
I have an external burner hooked up thru a USB port and I have a cd/dvd burner on my computer. Both drives are giving my the same error message...I don't know what to do.

I have tried different usb ports...plugged the external burner into 4 different ones.
I tried buying a different usb cord for the burner...nope
I have tried different cds and dvds..different brands and types.
I have tried: support.....microsoft.com...fixit website which helped a lot. I couldn't even play music until I used that website. Now I can at least play music I just can't burn anything. (btw. that website is awesome for a lot of things).
I have tried unistalling Roxio because someone said that might be my problem. (Nope)
I have tried updating my drivers.
I have tried going to device manager and seeing if there is any exclamation points but they say everything is working properly......lol!!

I don't know what else to do or what the problem could be because i... Read more

A:My internal & external burner are giving me error message G&F:\is not accessible

See CD/DVD or Disk Problems? How to Fix Problems Caused by Filters to see if it might help
 

3 more replies
Answer Match 44.1%

I was using my flash drive this week and when I went to use it this morning I could not access some folders. It gave I/O device error message. Could you please help recover the data from the folders.

I have already run chkdsk and still cannot open the files.
Thanks
 

A:recover data from flash drive that is giving I/O device error

Please be more specific in what the error message is telling you. It usually pinpoints the problem so you know where to go fix it.
 

2 more replies
Answer Match 44.1%

Ok, my burner has always worked great...all of a sudden out of nowhere, it fails everytime I try to burn a data dvd disc...the discs I am using are Memorex DVD-R 4.7GB which I have been using for a very long time and never had a problem. I also tried Kodak blanks with the same result. I will add the files to my project (Using nero 7 ultra edition by the way, always have, and always worked!), start the burn, it will automatically jump to 18% done and stay there, and eventually fail saying "invalid block address...any help would be greatly appreciated...this is so frustrating!!!
My Sysinfo is as follows...
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 64 bit
Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3995 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1806 Mb
Hard Drives: C: Total - 225160 MB, Free - 139456 MB;
Motherboard: Gateway , SJV40-MV , Not Applicable, 921CUXMBQTF003EF
Antivirus: AVG Internet Security 2011, Updated and Enabled

HERE ARE 2 LOGS FROM FAILED PROJECTS IN NERO AS WELL...
Youngs

1C82-A0K5-19E5-MAAX-400E-E1C0-****

Windows XP 6.0
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0

Recorder: <TSSTcorp CDDVDW TS-L633B>Version: AC01 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -&g... Read more

A:Nero 7 Ultra Edition Keeps Giving Invalid Block Error!!!

16 more replies
Answer Match 44.1%

I am new here so apologies if I don't do something right. I am running Windows 7 64 bit home edition. I have most browsers and this problem comes up in all of them. IE8, Firefox 3.6.3, Opera, Safari, you name it.

I have always had Norton Security center running and that one was fine. I downloaded Element Total Protection as part of the giveawayoftheday promotion.

I uninstalled it this morning as it seemed to interfere with my start programs. It had an error of a .dll that looked like a system one and it wanted to delete it.

now if I go to certain sites, it gives me a prompt that it wants to download the file. I also amable to go to a certain site and it site and it is okay but it won't let me log in.

Can someone help me please?

A:Certain non plain html sites giving error or download request

I'm not familiar with the product but most security software needs to be uninstalled properly with specific uninstallation tools that you can probably find at their website. Revo Uninstaller is a good all purpose tool that works on just about anything. Try that first.http://www.revouninstaller.com/

1 more replies
Answer Match 44.1%

I have a Dell Dimension XPS_GEN_3 Intel(R) Pentium (R) 4CPU 3.2Ghz 3.19 Ghz, 3.00Gb of RAM with Windows XP Pro SP2. Raid 1 (Mirror) config'n.
Archive/Backup storage (problem) device is Maxtor One Touch.

The device has been working correctly for some years.

I see the drive letter for the drive in Windows Explorer but when I click to expand I get the following error message - "The request could not be performed because of an I/O device error" .

The only recent activity that could have brought on this problem is my moving in a large volume of files and folders.

I need to find out how I can regain access to the files in the storage device. I can not afford to lose these files.

I have read previous thread on this type of problem but no clear solution for my situation and requirement. I hope someone can help me.

Thanks in advance.
 

A:Solved: Maxtor back up drive giving me I/O Device Error

16 more replies
Answer Match 44.1%

I am having problems with my Canon program Zoombrowser. It has worked find up until about a month ago. Then I started getting an error message Zb module stopped working I 've called tech support for Canon, HP and Window. They all point the finger at each other. PLEASE someone HELP ME!!
 

More replies
Answer Match 43.68%

The smart hard disk check has detected an immanent failure. To ensure not data loss, please backup the content immediately and run the hard disk test in system diagnostics.I've ran the test and it says there is no hard drive. I'm stumped. Plez help

More replies
Answer Match 43.68%

Hi all,

I have a Dell Laptop Core 2 duo Processor. Since tomorrow its giving a blue screen error and rebooting please suggest what to do.I am attaching the dumps which would help you.

Thanx in advance...

A:Dell Vostro 1015 Laptop giving blue screen error

Related to athrx.sys Extensible Wireless LAN device driver from Atheros Communications, Inc. Yours is from June 2009.

I would update to the most recent driver available.

Also please update to SP-1.
Please run the System Update Readiness Tool (SURT) and then update to SP-1
32 Bit

Download: System Update Readiness Tool for Windows 7 (KB947821) [February 2012] - Microsoft Download Center - Download Details

64 Bit

Download: System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [February 2012] - Microsoft Download Center - Download Details
Now update to SP-1

Learn how to install Windows 7 Service Pack 1 (SP1)

3 more replies
Answer Match 43.68%

Dell Vostro 1015 Laptop giving blue screen error
Hi all,

I have a Dell Laptop Core 2 duo Processor. Since tomorrow its giving a blue screen error and rebooting please suggest what to do.I am attaching the dumps which would help you.

Thanx in advance...

A:Dell Vostro 1015 Laptop giving blue screen error

Hello jiturajpattnaik and welcome to Seven Forums.

You'll probably get a better response if you post your question in the Crashes and Debugging section. Here's a link on the info you should provide:

http://www.sevenforums.com/crashes-d...tructions.html

Due to time zone differences and how busy the BSOD experts are, it may take a while for an answer. In the meantime you culd try running a System File Checker scan from an elevated command prompt (option two, this tutorial) in case any system files have become damaged or corrupt. If problems are found run the scan 3 times rebooting in between each scan.

SFC /SCANNOW Command - System File Checker

3 more replies
Answer Match 43.68%

Not sure whats going on, system is slow, Malwarebytes came back with error 714 (0,9), so uninstalled using add/remove programs - but even that continually showed error code thru process. Have now reinstalled Malwarebytes and running scan - nothing detected on scan yet. Tried to print on Dell 924 Photo printer (which has worked fine for 5 years) and came back printing error. Tried to add/remove MS SQL 2005 program, wouldn't allow me to uninstal...this program had error messages at startup, wasn't even sure what it was or how it got on the system, so decided to uninstal after inquiring on techguy software forum..but it wouldn't let me uninstal it. I think the program was probably related to high school technology class with the boys. Anyways, here is the hyjackthis log attached. Any help would be appreciated. This was the family PC, but now the kids are gone and I'm just trying to get it cleaned up so I can use it again. Dell Dimension 4550, Windows XP SP3, AVG antivirus. Thanks!

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 10:21:43 AM, on 15/06/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDO... Read more

A:Solved: Malwarebytes error, Printing Error, system slow

14 more replies