Tech Problem Aggregator

cmd box and error at every turn on or reboot need help please!

Q: cmd box and error at every turn on or reboot need help please!

I'm going to try to add the image of this problem everything works fine after I click on OK. Thanks for all help & rep points. Also, I have not tried to type any commands.

A: cmd box and error at every turn on or reboot need help please!

Quote: Originally Posted by p5200


I'm going to try to add the image of this problem everything works fine after I click on OK. Thanks for all help & rep points. Also, I have not tried to type any commands.


Do you run an AV program? I would suggest checking for a virus/infection.

HTH

8 more replies
Answer Match 47.88%

After S&D Found pinch it said it removed, but I rebooted and got an lsass.exe error with a code number, I have also tried Norton 360 which failed to do anything, as well as run malewarebytes, and regcure... regcure found massive errors that it said it cleaned and fixed but everytime I reboot the problem re-occurs, can someone please help me????I have no idea what to do here.... Would you like to view a HJT Log?my browser opens to this location which is the root of the worm/or trojan i believe... //216.240.159.88/find.php?q=the%20masters&session=632143^^^ This is the link which has blue text that says "click here to proceed." again the browser opens automatically on its own... I have turned on Firewall, shut off sys restore... and run every spy maleware program under the sun including trendmicro on line, as soon as the problem is detected my system reboots.... and im stuck starting all over...here is my log Logfile of Trend Micro HijackThis v2.0.2Scan saved at 11:06:04 AM, on 5/6/2009Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\At... Read more

A:FireFox Browser Auto starts after Reboot / Error after Reboot

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.comDDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the resul... Read more

2 more replies
Answer Match 47.46%

hi, a am new in readyboost technology, and i wanna to ask, it is normal that readyboost every time that you reboot it turns offs and you need to go to the properties of the device and turn it on again? please reply if its a normal behavior of vista or not, thanks!!!

More replies
Answer Match 47.46%

I have a situation that UAC must be disabled in order to use a web based application features like merging data into MS Word, uploading/downloading within this application. I disabled UAC using GPO to all machines but for the next person
that will log on to the same computer the function of the web application mentioned will not work until the user goes to the Ctrl Panel > User Accounts > User Account Control and click OK on the warning message that says 'This setting will
take effect after you click OK and reboot' . I have like 1200 computer to manage and this causing big problem.

How can I automate using maybe GPO or pushing a register entry or anything you can think to turn off UAC
without a reboot required or even to do auto reboot after the GPO is applied. When this yellow exclamation in Ctrl Panel is ON with a message 'This setting will take effect after you click OK and reboot'  the application will
not work.
This 3rd part vendor are unable to make this application work while UAC is ON and I wonder how other application makers make their app work while UAC is ON.
Thanks you for your help.

More replies
Answer Match 47.46%

.
I have Win 7 Home Premium.

Is there an easy way to disable my wireless connection so that (a) it does not enable itself after a reboot, and (b) I don't need to implement the complete process to re-enable the wireless?

Under normal circumstances, the re-enable after a reboot is fine. I can disconnect WiFi from the system tray, and it reconnects after reboot.

But sometimes, I might want wireless to remain disabled after reboot. For example, if I'm doing a database restore, and the database starts synching after a reboot (such as Evernote), it could cause problems :-)

At the moment, I simply switch off the router until the database restore is complete.
.

A:How to turn off WiFi so that it does not re-enable after reboot?

Just don`t let it connect.

Doesn`t the laptop have an on off switch for wireless ? Most laptops do.

1 more replies
Answer Match 47.46%

hey
i have a philips freevent x53 laptop its only 6 months old . but it crashed and wont load up . it keeps going on to the screen where you choose safe mood ect . it wont go no further then that . ive tryed rebooting and that doesnt work . i have a reboot disc to but it wont read the disc .
any help ?
 

A:my laptop wont turn on or reboot

You may need to go into your laptop's BIOS and change the boot order, as soon as you turn your laptop on, look for an option similar to "Press Del to enter Setup".

When you see the option, let the laptop run to the point where it doesn't go any further and reboot it. This time, keep pressing the button you saw earlier - it could be either Del, F2 or any number of keys.

This should load your laptop's BIOS screen. Using the arrow keys on your keyboard, navigate around - being careful not to change any of the options - until you find a section or menu called "Boot Order" or something similar. What you then need to do is fix it so that the CD-ROM drive is above your hard drive in the order, the exact key commands will probably be displayed to you in some kind of help section of the screen.

When you've done this, reboot with the CD in the drive and it should start. If not, try the CD in another computer (just starting up from the CD alone will not do anything to the computer). If it starts and shows a blue "Windows Installation" screen, there's a more serious problem with your laptop.

If this is the case, I would personally recommend sending it back to Philips (or wherver you got it from) and getting it looked at under warranty. Laptop warranties are usually good for a year unless you've dropped it or spilled something on it.

Hope this helps a bit
MF
 

1 more replies
Answer Match 47.46%

Hi All,
When my system is booting everything is fine, i see all the pics and sound and etc. if i try to do a restart my monitor goes into power saving mode and then does not awake from it.

i have connected a dell net book and confirmed that the on the restart that the monitor comes out of the power saving mode.

1.I have run the OS in diagnostic start up to find out if any software might actually do something
2. I have removed every usb item except the mouse and the keyboard
3. I have taken out the VGA card for one boot and then put it in back again.
4. I have connected the DVI cable to a different ports ( first and second)
5. I have started the system with win 7 drivers but still the same problem.
6. I have installed latest nvidia drivers 258.96

nothing is working

honestly.... What am i doing wrong here ?

ps. Monitor model is LG M2394 D

A:Monitor does not turn on after reboot on Nvidia 275

  
Quote: Originally Posted by Droiyan3


Hi All,
When my system is booting everything is fine, i see all the pics and sound and etc. if i try to do a restart my monitor goes into power saving mode and then does not awake from it.

i have connected a dell net book and confirmed that the on the restart that the monitor comes out of the power saving mode.

1.I have run the OS in diagnostic start up to find out if any software might actually do something
2. I have removed every usb item except the mouse and the keyboard
3. I have taken out the VGA card for one boot and then put it in back again.
4. I have connected the DVI cable to a different ports ( first and second)
5. I have started the system with win 7 drivers but still the same problem.
6. I have installed latest nvidia drivers 258.96

nothing is working

honestly.... What am i doing wrong here ?

ps. Monitor model is LG M2394 D


1-check the driver for both in device manager

2-check the power mode settings for turning off monitor etc

3-try booting into safe mode (F8) does it still happen??

2 more replies
Answer Match 47.46%

.
I have Win 7 Home Premium.

Is there an easy way to disable my wireless connection so that (a) it does not enable itself after a reboot, and (b) I don't need to implement the complete process to re-enable the wireless?

Under normal circumstances, the re-enable after a reboot is fine. I can disconnect WiFi from the system tray, and it reconnects after reboot.

But sometimes, I might want wireless to remain disabled after reboot. For example, if I'm doing a database restore, and the database starts synching after a reboot (such as Evernote), it could cause problems :-)

At the moment, I simply switch off the router until the database restore is complete.
.

A:How to turn off WiFi so that it does not re-enable after reboot?

Just don`t let it connect.

Doesn`t the laptop have an on off switch for wireless ? Most laptops do.

4 more replies
Answer Match 47.46%

I've been getting MANY problems with my computer freezing up on start up whenever I try to turn it on. I'm on a Windows XP Home, Asus k8v delux mobo, Corsair dual 256 Mb RAM, and AMD Athlon 64 3200+

The problem is when it starts up, it's different everytime how it happens...sometimes it happens immediately, sometimes it happens when trying to open programs in the early stages of logging on windows, sometime it happens at logon screen, sometimes it happens 5 minutes after being logged on...but the computer just...freezes...not like your typical freeze, where stuff still runs in the background (like music)...it kinda just dies but stays on...the biggest tell tale sign is the mouse stops working...I use an optical mouse, and the light just goes off...IT's not the mouse because I can't type either...and the fact that programs cease to run anymore. Sometimes it doesn't even lock up...sometimes I get a BSoD, and other times when I boot up, I don't even get to the Motherboard's logo screen...what should be a quick 5 minute or less process, stretches out to close to 20 minutes because it happens numerous times...it's very frustrating and I'm not sure if it's a problem with Windows, or problem with processor, or problem with motherboard...It's a situation I'd like to resolve and would appreciate any help I could get.

Thanks

A:bizarre lockup on reboot/turn on

check out the power supply
post the bsod error message in full

5 more replies
Answer Match 47.46%

my windows dont turn off or reboot when i ask to do it. and i find why ,i have a program or something else its on . its call xpwin.exe if i turn off this one and i ask windows to turn off or rebbot he do it. i try to find on the internet whats is this program and i find nothing about this xpwin.exe. somebody could try to help mee to find whats its this xpwin.exe concern .

thanks you verry much.

A:windows xp pro dont turn off or reboot

you are infected with a virus

winxp.exe is a process which is registered as [email protected]\r "This virus is distributed via the Internet through e-mail and comes in the form of an e-mail message, in the hopes that you open its hostile attachment.\r" The worm has its own SMTP engine which means it gathers E-mails from your local computer and re-distributes itself.\r "In worst cases this worm can allow attackers to access your computer, stealing passwords and personal data.\r" This process is a security risk and should be removed from your system.

fix it with this

Code:
http://www.liutilities.com/products/campaigns/plib/rb/?s=winxp.exe

10 more replies
Answer Match 47.46%

every time i turn on my PC it goes threw the reboot mode, the it ask F1 to continue or F2 for system set-up.

A:why does my pc reboot every time i turn it on, then click f1

There should be more information. Is it saying there is no boot device? The amount of system memory has changed? When was the last time you were able to successfully boot the system?

8 more replies
Answer Match 47.46%

hay guys
i need yourhelp

this started happening today
i went to turn off my computer, goes through the usual shutdown proccesses, then all the sudden it blue screened then restarted.

I got it to stay so i could copy down my error
it starts with the usual blue screen message
then the technical info is
*** STOP:0x0000007E (0xC0000005 0x8D62A9B5, 0x8A370B68, 0x8A370864)
*** usbhub.sys - Address 8D62A9B5 base at 8D60D000, Datestamp 47919064

Sooo yeah
any help would be appreciated GREATLY
can someone [please inform me of what this means / has to do with, if not a complete solution
im on my knees xD
o btw this is an edit forgot to add
everytime i turn it off, it bsods for seconds then restarts, so its been on for like 3 days lulz
 

A:HELP! BSOD on shutdown and reboot. Cant turn off PC!

this seems to have subnk to the botttom of the forum so lets jsut bump this back up
 

1 more replies
Answer Match 47.04%

my pc screen turn black after restart/reboot.the only thing i can see is the white cursor (arrow).very bad for me.i try to repair with my windows xp cd without sucess.if i reformat i lost my work(pictures,music,etc...someone knows the mistake?some tips are welcome.thanks for the attention.
 

A:my pc screen turn black after restart/reboot....

10 more replies
Answer Match 47.04%

I'm a newbie to this forum. Just got a new HP Pavilion d6500t with installed Vista Ultimate x64. Has been tough going, but was scraping by until today. I installed Quickbooks (via download) and transferred my data files from my old pc to the new pc. Things seemed fine...then BAM!

The screen became "jumpy" and I received a number of error messages. Could not bring up Task Manager, so I had to shut down the pc manually (turned it off). Reboot involved a system check because of the manual shut-down. System check was fine...but, now my pc is frozen on a black screen with the hp logo in the middle. My choices are the usual: Press <ESC> to enable startup message, <F1> to enter System information...etc.

MY PROBLEM: I cannot go ANYWHERE from here. The F-keys are not responding AND I cannot even manually shut off the pc!

I am a total novice when it comes to pc systems. I need help DESPERATELY. Any suggestions out there?

A:VISTA FREEZES - CANNOT TURN OFF COMPUTER to REBOOT

Unplug it.

Did HP provide a recovery disc?

6 more replies
Answer Match 47.04%

Hi
I've an ongoing problem which is now very annoying.
At any given time my PC will turn itself off. It's not a controlled shutdown, it's literally as if someone has pulled the power supply. There's no blue screen and I just can't work out what the problem is.
If you then try to turn the PC on after this failure it won't. The fans whir and the lights come on but there are no beeps on start up and nothing is displayed on my monitor.
I can then get the PC to work by removing the power cable completely, waiting 30 seconds and then attempting to turn back on.
Generally it seems to happen during my syncing of my mp3 player, whilst media player is converting to say WMA format. Or during a compression of a ZIP file. It appears to be through cpu intensive applications. It will also do it on occasions during a full virus scan (Mc Afee INternet Security)
I had major problems a few months back as the "failure" corrupted the boot segment of my drive - which fortunately I was able to recover.
The PC is often on most of the day but during light use or sitting idly by it seems to have no problems.
THere are so many options of what could be at fault - memory, power supply, cpu, bad driver. I don't know where to start.
Is there a way I can create a log of activity to try and see what's causing this? I'd like to start logging of anything useful, start a media sync and see what happens.
My system details are:
Pc: Built system. Mobo: Asro... Read more

A:XP Crash - complete turn off and fail to reboot

6 more replies
Answer Match 46.62%

Hello, whenever I shut the lid of my laptop, it goes to sleep mode. After a while, when I open it back up it would turn on normally, but most of the times, it would just not even turn on.The keyboard lights can be turned on and the power button is on during that moment. Is there anything I can do to fix this problem?

More replies
Answer Match 46.62%

This is my info from speccy

Operating System
Windows 10 Pro 64-bit

CPU
Intel Core i5 4460 @ 3.20GHz 32 ?C
Haswell 22nm Technology

RAM
8.00GB Dual-Channel DDR3 @ 799MHz (8-8-8-24)

Motherboard
ASRock H87 Performance (CPUSocket) 33 ?C

Graphics
BenQ GL2460 ([email protected])
1024MB ATI AMD Radeon R7 200 Series (Gigabyte) 27 ?C

Storage
465GB Samsung SSD 850 EVO 500GB (SSD) 30 ?C
931GB Seagate ST1000DM003-9YN162 (SATA) 30 ?C
1863GB Seagate Expansion Desk SCSI Disk Device (USB (SATA)) 43 ?C
1863GB Western Digital WD Ext HDD 1021 USB Device (USB (SATA)) 29 ?C

THE DRIVE BELOW
1397GB Seagate GoFlex Desk USB Device (USB (SATA)) 36 ?C
THE DRIVE ABOVE

Optical Drives
PIONEER DVD-RW DVR-217

Audio
Realtek High Definition Audio
=========================================================

1397GB Seagate GoFlex Desk USB Device (USB (SATA)) 36 ?C
This drive here... is the drive that never shows when I reboot or turn on pc.
If I unplug and plug back in after pc is on... its good to go...
Any ideas?

I had it on a usb3 usb card (where the other 2 drives are), and then swapped it, to the mobo usb3 port. But again, no difference.

I am at a loss, any help would be excellent, cheers.

More replies
Answer Match 46.62%

Minor but annoying problem here.

I have 2 external 300GB hard drives (IDE type) connected via USB. Let''s call them D drive and E drive.

Well, let's say that I have them both turned on while my system is on and for some reason I have to reboot my system. Well, once my system is rebooted and up and running again I can start using D drive right away. But if I want to use the E drive, I have to turn the drive off then back on again in order for the system to recognize the drive after the system reboot.

It's always been this way ever since I got the drives about 8 months ago or so. I only now just decided to post about it since it's only a minor annoyance.

Anyone know why the D drive is ready to use after a system reboot without having to turn it off then on again whereas the E drive isnot?

Would love the E drive to behave like the D drive, of course.

Thanks.
 

A:Must turn external hard drive off and on after reboot in order to use it

7 more replies
Answer Match 40.74%

Can't give exact machine spec because I can't get it on.
AMD
350GB HDD
2 GB Ram
Windows 7 Home Premium 64 Bit


I could not figure out which category to post in so please help me!
I will give the back story and you can move the thread if you think it's in the wrong place...

Current issue is this>

I press the power button and the fan spins for maybe half a second and then stops - nothing else happens at all. No beeps, no sound, nothing. It's just dead.

Leading up to this was this sequence of events>

My pc was crashing out due to overheating.
It seemed to be that he thermal paste needed re applying.
So I bought thermal paste - followed the regular steps to apply etc, re-fitted the fan.

Powered on machine.
Saw usual start up screens with press del for setup etc.
Then> CPU fan error, press F1 to resume.
(The fan was spinning)
Pressed F1
It seemed as though star up was going to continue but instead screen went blank with just a flashing curser in top right corner.

Tried several re-starts.
Changed connection on CPU fan.
Same issue kept happening, exactly the same.

Went to bios and changed fan boot thing (can't think what it's called) to ignore.

Re-started.
Fan spinning. (no cpu fan error message)
Regulr boot process kicked in
Screen blank, then > Error loading Operating System.

Checked all internal wires etc. Unplugged unnecessary stuff like dvd sata cable etc. Replaced HDD sata cable with new Sata cable.

Re-started.
N... Read more

More replies
Answer Match 40.74%

when i try to turn off my computer or reboot , my computer do nothing , what i do its i turn off with the Windows Task Manager some programe in the one by one and each time i ask to turn off my windows xp. and when i turn off the one called xpwin.exe . the windows turn off corectly. now i try to find whats is this programe do it . now Riskyone101 ask mee to do some programe and i give you the result.

thanks for your help. and have a nice week end.




DDS (Ver_09-05-14.01) - NTFSx86
Run by marc at 9:27:00,61 on 2009-06-20
Internet Explorer: 8.0.6001.18702
Microsoft Windows XP Professionnel 5.1.2600.3.1252.33.1036.18.1023.281 [GMT -4:00]

AV: Symantec AntiVirus Corporate Edition *On-access scanning enabled* (Updated) {FB06448E-52B8-493A-90F3-E43226D3305C}

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\WINDOWS\system32\svchost.exe -k WudfServiceGroup
svchost.exe
svchost.exe
C:\Program Files\Fichiers communs\Symantec Shared\ccSetMgr.exe
C:\Program Files\Fichiers communs\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
svchost.exe
C:\Program Files\Fichiers communs\ArcSoft\Connection Service\Bin\ACService.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Fichiers communs\Microsoft Shared\VS7Debug\mdm.exe
C:\Program Files\Pho... Read more

A:the computer dont turn off or dont reboot

j'ai fais un scan avec BitDefender Online Scanner - Rapport virus en temps réel



Généré à: Mon, Jun 22, 2009 - 11:39:21


--------------------------------------------------------------------------------





Info d'analyse



Fichiers scannés
88522

Infectés Fichiers
28








Virus Détectés



Adware.Webhancer.A
2

Application.Webhancer.AE
2

Application.Adware.NewDotNet.B.Dropper
2

Adware.Webhancer.C
2

Adware.Whenu.BSR
3

MemScan:Trojan.Generic.967157
4

Spyware.Webhancer.U
2

Trojan.Generic.1142005
1

Spyware.Webhancer.F
2

MemScan:Trojan.Generic.1427433
1

Trojan.Generic.1747387
2

Gen:Trojan.Heur.GM.006040E022
1

Adware.Generic.66017
2

Adware.Generic.60122
2

3 more replies
Answer Match 38.64%

I have a RemoteApp server setup (Windows 2012 R2) with SSO enabled. This RemoteApp server is for internal use only. I have no issues with any of my clients running Windows 7 or above. On Windows XP however, I can only connect to the RemoteApp session once
and then I get the error An authentication error has occurred (Code: 0xc00002fd). If I reboot the PC, it will again work once and then get the error.
The other thing we discovered is that when you first close the RemoteApp session, the mtsc.exe process remains active for 30 seconds or so. As long as that is active, I can re-enter the RemoteApp session multiple times. The moment I kill that process, I
get the error and must reboot.
I'm pretty sure something is being cached on the client side, but every lead I have found has not resulted in a resolution.
Anyone have any ideas? (Btw, "get off of XP" is not an option at this time. lol)
Any assistance would be great.

Robert Doyle | Network Administrator | Five Below, Inc.

More replies
Answer Match 38.64%

I got system restore to work. Solved.
 

More replies
Answer Match 38.64%

I am having a bit of a problem with booting up of my computer. When I try to boot it up I get this message

"Reboot and select proper boot device or insert boot media in selected boot device and press a key"

Having a look around some places, some people say that I have to use the reboot cd I got with the machine. However... I didn't get a reboot cd with the machine and I've got no other idea what it could be. Any ideas?
Thanks

A:Reboot Error

Hi make and model of your computer please,do you know if it has a recovery partition

1 more replies
Answer Match 38.64%

Upon Reboot I Get The Message "the program can't start because LayoutDll12Oem.dll is missing from your computer".

Not Sure What This Means, But When I Try To Do A System Restore It Says I Need To Turn On My Protection For System Restore Or Something Like That, Then It Says No Restore Points Found, Which I Had Multiple Restore Points

However I Don't Care If I Have To Restore It Or Not, Just Wanna Solve This Problem, It Seems That Since This Problem Has Started A Lot Of Things Are Not Working Correctly.

I Play A Game Called Runescape, I'm Sure You've Heard Of It, When I Try To Play It Or Any Thing Through Java It Wont Work. Runescape Gets Stuck At Loading Configuration.

I Don't Know Which Happened First, I Didn't Really Pay Attention, But I Looked Up A Couple Guides, Tryed Some Things And I Think I Just Made The Problem Worse, I Changed Some Environmental Variables, Both In System And User , "CLASSPATH" And "Path"

Ive Heard It Could Be My Firewall, But I Have No Clue What I Put Into The Allowed Section So That It Would Work

Basically Im Just Looking For A Fix, Or Something To Let Me Know Whats Going On

Help Is Greatly Appreciated

-Rollup

A:Upon Reboot I Get An Error

You have a broken program file. When a file of the program (assuming a file of JAVA) is removed/becomes corrupted/maybe moved somewhere else, then the process (JAVA) may not start. Try to reinstall Java. You don't need to restore for this, try to reinstall JAVA and see what happens.
When I couldn't get rid of an auto-start program I simply just deleted it and then at startup it said like 0xexample error code, couldn't find file/start something. So it's not a Windows error and nothing serious.

1 more replies
Answer Match 38.64%

Could someone please check this HiJack This logfile to see if I have anything worng?
An error message keeps popping up and then reboots the system and scans disk on occasion. I've run virus scan, adware etc but nothing yet.
Thank you.

Logfile of HijackThis v1.99.1
Scan saved at 10:42:25, on 25/02/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\savedump.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Norton SystemWorks\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton SystemWorks\Norton Utilities\NPROTECT.EXE
C:\WINDOWS\system32\nvsvc32.exe
C:\PROGRA~1\NORTON~1\SPEEDD~1\nopdb.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\PowerQuest\Drive Image 7.0\Agent\PQV2iSvc.exe
C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\E_S09IC1.EXE
C:\WINDOWS\system32\rundll32.exe
C:\PROGRA~1\NORTON~1\NORTON~1\navapw32.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\VIA\RAID\raid_tool.exe
C:\WINDOWS\system32\wuauclt.exe
C:\Documents and Settings\dave\My Documents\Janet, Jamie and Mark\Mark\Hijack this\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.ntlworld.com/
O2 - BHO: Ac... Read more

A:Error and reboot

Finally caught the info on the error:

The system has recovered from a serious error.
A log of this error has been created.
For more information about this error, click here.

(clicked)

Error signature
BCCode: f4 BCP1: 00000003 BCP2: 82226930 BCP3: 82226AA4
BCP4: 805E9F88 OSVer: 5_1_2600 SP:2_0 Product: 256_1

To view technical information about the error report, click here

(Clicked)

The following files will be included in this report:
C:\DOCUME~1\dave\LOCALS~1\Temp\WER54e8.dir00\Mini022506-07.dmp
C:\DOCUME~1\dave\LOCALS~1\Temp\WER54e8.dir00\sysdata.xml
I appreciate any advice. Thank you.
 

2 more replies
Answer Match 38.64%

Hi All

I bought a new computer recently with no OS and no graphics card. I got the computer up and running, but there is a problem with it which I am unsure how to fix. The system is as follows:

CPU
INTEL® CORE® 2 DUO E6600 (2 X 2.40GHZ) 1066mhz FSB/4MB Cache

Memory
2048 MB CORSAIR DDR2-667 PC5300 - LIFETIME WARRANTY! (2x1GB)

Motherboard
ASUS® P5N32 SLI SE DELUXE: 2 PCI, DUAL LAN, SATA RAID

USB Options
SIX USB 2.0 PORTS (4 REAR + 2 FRONT)

Hard Drive 1
SATA II 320 GB HARD DISK @ 7200rpm 8mb cache
Raid
NONE

CD Writer/Combi Drive
16x +/- DVD WRITER (8x +/- Dual Lyr) (5x DVD-RAM) (40x CD-RW) (£23)

Graphics Card 1
NVIDIA 7950GX

Sound
HIGH END ONBOARD 8 CHANNEL SOUND (RECOMMENDED)

Modem
NONE, I WILL BE USING BROADBAND

Network Facilities
10/100/1000 NETWORK CARD FOR BROADBAND

Floppy Disk Drive
INTERNAL 23 IN 1 CARD READER (READS XD FORMAT) (NO FLOPPY)

Power Supply & Cooling
500W (Peak) Super Quiet Dual Rail PSU + 120mm fan & CPU Cooler

The computer runs ok most of the time, but it suffers from a problem that only seems to occur when I am playing a game. It can happen after ten minutes or ten hours after the computer was switched on, no matter what point I am in or what I am doing in a game, but the computer just reboots itself. I disabled this function to get an idea of why it is doing this, and the blue screen shows the error signature:

DRIVER_IRQL_NOT_LESS_OR_EQUAL

Technical info:

STOP: 0X000000d1
(0xbbdbdf32, 0X0000000z, 0x00000000, 0xb9f65d90)
ALC... Read more

A:Reboot error

The problem you are having might be an overheating problem Please to try speedfan and see if there are any fires showing next to the temps.

Here is a download to run SpeedFan as a service on bootup here:
http://www.skipyrich.com/sfsvc.ptml

SpeedFan is a freeware program that monitors voltages, fan speeds and temperatures
http://www.almico.com/speedfan.php
 

1 more replies
Answer Match 38.64%

I just hand built my new PC and it took me a while to get everything right, but now there's just one problem left. As soon as I get a screen saying choose your options to enter windows safe mode etc., after I choose safe mode the computer hangs for a second and then I see a flash of a blue screen and then my PC reboots time after time, never fails. The drive I have set as primary master has worked well for over a year, so I don't know what's wrong. Thanks in advance...
 

A:New PC Reboot Error

Hello and welcome...

Did you build this PC, take a hard drive from another machine that already had an OS on it, and try to run it?

If so... there are often many complications with the OS and the motherboard (all the hardware, chipset, etc. etc.) People have gotten it to run before, but 90% of the time its best to do a fresh install of your Operating system.
 

3 more replies
Answer Match 38.64%

Today after schooling, I got home, started up my laptop (Lenovo G50), every time I put in my password, it would load and freeze. So I decided to to system refresh. It worked. Then I wanted to factory reset, to remove the possible files that are causing the problems, and to just plainly clear up space. So after its done resetting, I put game me the option to upgrade to Windows 10, I accepted, although it put me back in Windows 8.1 home screen. The home screen wasn't normal, it was very disfigured. Almost nothing appeared but the Windows icon bottom left of homebar. Clicked it it brought me to the menu which was also not visible. I try reseting the power on PC. It says a reboot error. I try using the F2 command, says no HD is readable or recognizable. But now there is a grinding sound coming right center of PC. The PC was healthy. But today it had a spasm . I need help. Can't afford a new one.

Help!

A:PC Reboot Error

First off; it sounds like the HDD might be faulty. Secondly; did you check with Lenovo website for your make/model laptop before making the jump to windows 10 to see if there was any driver support first?

1 more replies
Answer Match 38.22%

I am trying to load NT on a computer. It worked fine. Added SP6 and rebooted fine. Added sound card driver, vid. drivers, and network card drivers. Rebooted and I get this error. It then goes and tries to boot from CDROM and then says press N to boot from network. It then says "Boot failure Insert boot disk in A: press any key when ready" Of course, I didn't make a repair disk either. I am on location and need a fix ASAP. Thanks!!!!!!!!!!!!!!!

------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://ShopComputerAces.com
http://HeadLunatic.com
http://IamNotLost.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~
 

A:{Resolved} - NT boot error - "Load Error! Press any key to reboot..." - help ASAP

Reformated, reinstalled.
Same error.

Please help ASAP.

Thanks,

Cory

------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://ShopComputerAces.com
http://HeadLunatic.com
http://IamNotLost.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~
 

2 more replies
Answer Match 38.22%

Computer Specs:
MSI K8T Neo
AMD +3000
1 gig ram
160 gb HD also 200 gb HD
Nvidia GForce 6600
DVD Rom
DVD CDRW -/+
Creative audigy sound card with face controls
1 Floppy Drive (and yes i still use it)
450watt PS
OS Windows XP Pro 32bit/ Windows XP Pro 64bit

Problem:
Computer Randomly Reboots when Running game or Video or playing music. Computer when rebooting its self says Error Loading OS. When turning PC off and turning it back on Computer boots as Normal.

Whats Been done thus far all of which pass:
Memory Tests to test memory for issue of bad Memory
Replaced Video Card to 6600
Replaced IDE Cables
Ran Stress Tests on Processer for 3 days of work.
Reformated Both Hd's and cleared out both Boot sectors
Ran 5 day Benchmark Tests to find system failer.
Changed OS and still having same problem
 

A:Reboot Error Loading OS

Looks like you have 2 hard drives. Try installing the OS on the other hard drive.
 

1 more replies
Answer Match 38.22%

I got this message on a reboot today. Error: Access violation at 0X7C9104B (tried to write to )X00030FFC, Program Terminated. I looked in the event viewer, but there is no reference to anything being terminated or of any negative issues. Google gives me nothing except the, "your search did not match any documents", message. Any guidance or assistance would be greatly appreciated.Win XPHomeDell 8250 P4 2.5Ghtz512 MB RAMBe (Post Reply) Safe..hehe Da AnimalEdit: remove extraneous characters.

A:Error Message on Reboot

More info would be needed, I think.

Those alphanumeric strings look like memory addresses...but that does not tell me anything. Maybe it's a clue for others.

Louis

5 more replies
Answer Match 38.22%

upon reinstalling windows 2000 pro, I am greeted with three errors "boxes" that dislay at the same time and on top of each other. The first and largest box says winsck at the top, the second says status and the third and smallest says system error unable to open dialog. I am able to click out of these and operations seem otherwise normal. Any thoughts or suggestions? Thanks!
Dell OptiPlex Gx100
OS is Windows 2000 Pro
 

A:reboot error messages

8 more replies
Answer Match 38.22%

Hello

our computer did an auto update to windows 10, then died
I called toshiba helpdesk for a recovery disk.... it cost me $77.00

I took 8 hrs to install then came up with an error message at 100% when it rebooted.

Error :003 recovery error please reboot
second error was 0xc000000f no bootable device.

Searching the net it looks like our hard drive is stuff.

True or false can someone help

More replies
Answer Match 38.22%

at least once a month my computer will reboot itself when i get into windows and i'll recieve the same error message. when i send the error report to microsoft i get forwarded to this same page everytime. i check my computer for spyware and malware everyday and haven't found anything. or any viruses. i've also used the online scanners like panda and such that haven't found anything either. so i have no idea what keeps causing this error. please help!

A:reboot and error message

Xiah, What is the error message you're receiving? Do you have your computer configured to generate error reports? You can do this by going to Start>Control Panel>System, click Advanced Tab>Startup and Recovery, click Settings under Write Debugging Info select Complete Memory Dump. Make sure that the box Overwrite any existing file is checked. Click OK all the way out.
When the error message pops up again you can send it to MS. You can always revert back to not reporting error reports once MS has helped. If you can catch the error message before sending to MS let us know what it says someone might be able to help.

12 more replies
Answer Match 38.22%

Hi

I am having a problem with my PC at home. I uninstalled Zone Alarm (v4.5 I think) and it said it needed to reboot to complete the uninstallation. As soon as the PC rebooted, there was a message saying CheckSum error: CPU settings changed, Defaults loaded. Press Del to enter Setup, save changes, F1 to continue. I know very little about the BIOS settings. I did press Del, but I don't know what would have changed so quit without saving. I pressed F1 to continue and Windows XP loaded fine and I installed the newer version of Zone Alarm (v5.1 I think).

Again it said it needed to reboot to complete the installation. PC shut down, but it didn't reboot. Now nothing happens when I switch on. My flatscreen monitor is showing the message: No Video Input. I have tried another monitor and that didn't work either.

I have opened the case and the fan is working, a light comes on on the motherboard (next to the memory), both CD and DVD-ROM drives are working and the hard drive light on the front flashes. The motherboard (a DFI Infinity model, 865PE I think), power unit, processor (P4 2.8 GHz), 140GB hard drive and video card (Radeon 9600) were all installed last April so I am hoping nothing needs replacing. Nothing is overclocked.

I have been using Zone Alarm as my firewall, I have AVG Antivirus and run Ad-aware scans regularly. I also have Spyware Blaster installed.

I have had a quick look on the net and it seems the problem could be caused by the battery, motherboa... Read more

A:CheckSum error, now PC won't reboot

Good Morning

Try locating the CMOS clear jumper on the motherboard. It's usually located near the flat battery. With the power off (unplugged), move the jumper from pins 1&2 to 2&3, the back to 1 and 2. Not all boards have this jumper so it you can't find it post back.

Look in this link under "Motherboard Jumpers"

http://www.dewassoc.com/support/bios/bios_password.htm
 

2 more replies
Answer Match 38.22%

I am having the same problem, but I need to approach it differently.  It's for an old version of HP that is not longer primarily being used.  The printer scanner is still hooked up so it can be used as a scanner, but the new printer/scanner is elsewhere in the house, so I don't want to delete the old one and have to go to the new one every time somethign needs scanning. And I don't want to re-install the software because it's not needed.  In fact, the tray app was never used to begin with.  It was just one of those annoying things HP gave you. So, is there a way to simply stop the trayapp.mis from coming up on every reboot without re-installing the software?  Operating on: Vista.Edit: Topic split from Error Trayapp.msi Comes On Every Reboot to get the attention it needs on it's own. ~ Animal

More replies
Answer Match 38.22%

Hi,

My friend is using his computer as an HTPC. It has 2 drives and the boot drive is split into 2 partitions. I was 'upgrading' his XP (was on C: volume) to XP-MCE and there was a failure of some sorts... Anyway, I decided to just do a clean install onto that partition.

As background, I have a 500 GB SATA on channel 1 and a 250 GB SATA on channel 2. The 500 GB is split into 2 partitions (both were originally setup as primary), a ~70 GB NTSF boot partition that had XP and a ~400 GB FTA32 storage partition.

I deleted the old boot partition and started installing XP-MCE into the now unallocated space. After the reboot to continue installation it stops after post with "Disk error" and "Press any key to restart" messages. If I boot to the install disk again it shows the storage space as C: and the new installation as D: (opposite of pre-reinstall). I retried with the 2nd SATA drive disconnected and it's the same every time.

I found this other thread - http://forums.techguy.org/windows-n...ght=disk+error+reinstall+xp+partition+c+drive
but it was in respect to 2 drives rather than 2 partitions on the same drive.

I can't reformat the whole drive; the storage partition has all the backup data that I saved from the original XP installation.

I'm stuck. My only option is if there's something I need to remove from the storage partition, I would accept reformatting my other 250 GB drive, installing XP, taking care of business whil... Read more

A:XP reinstall error upon reboot...

Put the 250 gig drive on Channel 1 adn move the 500 to channel 2. Install the OS on the new C drive.
 

2 more replies
Answer Match 38.22%

Hello, I am trying to fix my girlfriends Sony VAIO. Shes running it on XP and according to her; she went to sleep with AIM open and running. I've never actually sat at her computer to know what kind of anti-virus software she has running. But she says when she woke up, her desktop had gone to strictly her wallpaper, as if explorer.exe had crashed and closed whatever programs she had open as well. Anyones normal reaction to this is just restart it. She did so, and before she can boot into windows or even get a chance to log in to her computer an error message pops up.

"Parser Error"

"Value creation failed " at line 903" (That " in the middle of the sentence belongs there)


When I try to boot in safe mode, recovery mode, debug mode, or any other one of the options at boot it doesn't get anywhere except to that error message.

Im assuming she got infected with a trojan, but she has a paper that she had finished and not printed yet on her computer. Anyone have any insight on how to A) Get to a console so I could atleast copy that file off her computer B) How to fix this?

A:Parser Error after reboot.

First of all, getting the file off the system..... If the computer has a floppy drive, download NTFS4DOS (direct download link) from Datapol.de. Boot from this and it will allow you to copy the file to disk. If the file is too large, you may need to get a zip-style program onto the computer which can either compact the file or split it into separate chunks.

Secondly, getting the system working again. I would suggest running an in place upgrade. First of all, do you have an XP CD? Failing that, is there an i386 folder on the hard drive of the machine? If you have the CD, follow these instructions:
Insert the Windows XP CD into your computer's CD-ROM or DVD-ROM drive, and then restart your computer.
When the "Press any key to boot from CD" message appears on the screen, press a key to start your computer from the Windows XP CD.
NOTE: You may need to set the boot device priority in the system BIOS to get this to work.
You receive the following message on the Welcome to Setup screen that appears:

Quote:




This portion of the Setup program prepares Microsoft Windows XP to run on your computer:

To setup Windows XP now, press ENTER.

To repair a Windows XP installation using Recovery Console, press R.

To quit Setup without installing Windows XP, press F3.




Press ENTER to set up Windows XP.
On the Windows XP Licensing Agreement screen, press F8 to agree to the license agreement.
Make sure that your current installation o... Read more

1 more replies
Answer Match 38.22%

when rebooting I get windows protection error and need to press any key.Why won`t my pc reboot?
 

A:Win95 reboot error

Only on reboot or if you do a cold boot???

Microsofts say on win95 protection errors

http://support.microsoft.com/default.aspx?scid=kb;en-us;q149962
 

1 more replies
Answer Match 38.22%

Alright,
So my system was working perfectly ok for the last couple of weeks, installed a brand new HDD some weeks ago, transfered all the system files, and like i said, all was working fine, no crashes, no error messages.

Today, i was working on forwarding a port on my D-link 604 router, all was going on as normal, i hadn't made any weird changes to anything other than the router configuration, which is all done via browser,so again, no weird changes to the registry or anything like that.

Ok, so then, all of the sudden, the system rebooted, and as i logged in, i got this message saying that "C:AllUsers\ApplicationData\exezidyb.dll" could not be found, and little after that, the system reboots again.

I have gone into safe mode and tried doing system restore, i choose a date, and hit"Next" but nothing happens, "last known working configuration" doesn't work either.

I am currently logged in with the "Directory Services" option, but i want to resolve this without having to go to the people at bestbuy who will just tell me that they need to erase everything and reinstall windows like they have done everyone i know.


Any advice?


******
Added info:

Now, once i log on any of the normal modes, i don't get the same error message, i turned off"automatic reboot upon system failure" and now i get a blue screen that reads
STOP:0x0000008E C0XC0000005, 0x804EB951, oxEC7F5814, 0x00000000

Hope that helps y'all help... Read more

A:Error+System Reboot

Hello and Welcome to TSF

You might want to look this over

1 more replies
Answer Match 38.22%

Good morning,

I was getting this a lot until eventually I was getting a new error. Forgot what it said and I'm on my phone since I had to leave home. But the error I was told meant the hard drive would die soon

So now I'm getting that error before I received the deadly one. Reboot and select proper boot device.

So before I had to leave today I noticed my cable. Don't know what it's called but it's next to the sata cables that are plugged in the hard drives on the motheboard. I assume it's to power the hard drives. It's next to the big cable that powers the motherboard.
Should I get a new hard drive?

I'm using an old hard drive on a new pc and this hard drive has tons of cables. Like double compared to my Bros pc. It works now when I readjust it. But the cable keeps coming out lose.
 

A:reboot error message again

howdy and welcome. Yes, you need to get a new hard drive asap, and back your data up (if you want to keep it). If you don't have data you want to keep, just toss the old one and install a new one, then re-install the OS.
 

1 more replies
Answer Match 38.22%

I'm having a serious problem with cmd files, like cmd.exe and batch files:
every time I run one of them, my computer reboot instantily and without any reason.
And every time I search for help in google, like "cmd", "cmd.exe", "registry", it happens too.
I saw in lots of posts and forums, saing that it maybe is a malware, but that malware is for windows xp, and not windows 7.
My OS is Windows 7, 64 bits, service pack 1.

Sorry for my bad english, brazillian guy here...
 

A:cmd reboot system error

"but that malware is for windows xp, and not windows 7"

It still entirely possible that some similar malware exists for Windows 7, so please post on the malware forum as we aren't allowed to help with malware on this forum. Post here: http://forums.techguy.org/54-virus-other-malware-removal/
 

3 more replies
Answer Match 38.22%

COPY ERROR....Ive seen this posted before but cant get a responce on how to fix it so here goes..

Windows installer: Copy
The first screen: "preparing to install", and then next "please wait while windows configures copy", and then it reads "gathering required information".

The only button option available during this is "Cancel", so I have been clicking 'cancel'. As soon as I hit 'cancel', the installer automatically reappears, so I've been rapidly clicking cancel in order to get this to go away (it usually takes around 40-50 clicks for it to stop reappearing).

If I do not click cancel and let the installation continue, I get a series of error messages.

This is the first error message:
Error: 1705.A previous installation of this product is in progress. You must undo the changes made by that installation to continue. Do you want to undo those changes?

If I click yes, I get the following errors (below are some of the error messages - there are others, and they are very similar):

Internal Error 2908: 5173355F-690F-4EF8-9A2E-913262EEA7BF
Internal Error 2908: EBB15EA3-83A9-46E8-866E-C3C0A1A444F
Internal Error 2908: 59A70A0D-BDB7-4981-B32A-7EF3DB3AA5E1

After about 10 of these errors, this error appears:

Error 1935: An error occured during the installation of assembly component {EBB15EA3-83A9-46E8-866E-C3C30A1A-444F)
HRESULT: -2147319761

A:Copy Error On Reboot

check the disk is clean and no scratches
is this an original disk

you send a pm, if you expect a reply enable your pm

in the run box type
sfc /scannow
and press enter

1 more replies
Answer Match 38.22%

The server at my company went down today and when it was rebooted this message came up:"The Procedure Entry Point CertGetEnhancedKeyUsage Could Not Be Located In The Dynamic Link Library CRYPT32.dll". The server is running Window NT 4.0 Server software. What does this mean?
 

More replies
Answer Match 38.22%

C:\Users\Nico-Ico\AppData\Roaming\Babsolution\Shared\enhancedNT. dll
After I removed spyware found in my daughter's laptop with spybot now every time the Laptop is restart I get this warning windows, I did some reading and disable all the babylon stuff in all browsers but nothing has worked, Is Laptop HP Pavilion G4 came with W7 i3
Thanks in advance Turbo
 

A:Error warning every reboot

16 more replies
Answer Match 38.22%

I don't know why all of a sudden but my desktop will suddenly reboot then direct me to a microsoft help page on how to solve/remedy problem. When I checked the system log the only errors stated -

" DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service PPCtlPriv with arguments "" in order to run the server:
{F974178A-A284-440A-BEFC-5B0D11BCDB68}"

the error report sent to MS had the data sent
C:\DOCUME~1\Vincent\LOCALS~1\Temp\WER51b9.dir00\Mini061509-03.dmp
C:\DOCUME~1\Vincent\LOCALS~1\Temp\WER51b9.dir00\sysdata.xml

I reset my restore log on the MS suggestion that it was full and unable to create new restore points.

Does any of this make sense? I would gratefully appreciate your help.

A:Sudden reboot from 'serious error'

Try running through the steps given here:How to receive help diagnosing Blue Screens and Windows crashes

7 more replies
Answer Match 38.22%

HELP!!! An error named TrayApp.msi is keep poping up every time I reboot my computer:
The feature you are trying to use is on a network resource that is unavailiable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'TrayApp.msi' in the box below.
I tried the following:
I rebooted with the HP Photosmart CD however the computer didn't seem to find the file or just ignored it. (Tried this like 20 times)
I have also chose an alternate path to E:\setup\trayapp\TrayApp.msi and it still didn't work...

Please help me on this error. I can't think of anything else to do than just to ask some experts
Thanks to anyone that has posted

A:Error Trayapp.msi Comes On Every Reboot

Hello,

If you insert your HP cds, the file that you are looking for should be located in the setup folder.

Hope this helps

7 more replies
Answer Match 38.22%

Hello!
Can any body help?
I have a computer issue.

I received an error message " CAN NOT FIND HARD DRIVE WHEN BOOTING FROM THE WINDOWS XP CD" while trying to reload windows XP.

I have the XP CD.
I have saved all my files to an external storage device with "Maxtor 3200 Personal Storage.

IS THERE A STEP BY STEP DESCRIPTION ABOUT FORMATTING THE HARD DRIVE AND REINSTALLING WINDOWS XP?
SHOULD I FORMAT MY C DRIVE FIRST? AND THEN TRY TO REBOOT FROM THE XP CD AGAIN?

This was caused by a Norton LiveUpdate malfunction that started on May 3rd.
Their tech support give to many non sequitur reply's. They do not follow logically from what just preceded it.
Just now, MacAfee updated my virus protection and I didn't have to do anything.

Thanks for your attention.
 

A:Format and Reboot Win XP Pro w/CD = ERROR

16 more replies
Answer Match 38.22%

I have an intermittent error which either freezes the computer are causes it to reboot. This error has continued even though I have formatted the hard drive and reinstalled Windows. This leads me to suspect that I may have a hardware issue. The next time this happens exactly how do I get to the error logs or wherever else a description of this problem may be recorded so I can give you folks sufficient dataTo be able to possibly ferret out the problem
 

A:Intermittent error which causes reboot

16 more replies
Answer Match 38.22%

a few weeks ago i shut down my hp g60 laptop and a few days later turned it on and a black screen popped up and said no rebooting disc--insert reboot disc and press any key...i need help i dont know what to do to fix it. i dont have a rebooting disk nothing like that came with my comp. i bought it in august of 2009. please help!! thanks!
 

More replies
Answer Match 38.22%

On my laptop after a reboot an error came up on my notepad reading:
 
[.ShellClassInfo]
[email protected]%SystemRoot%\system32\shell32.dll,-21787
 
 
Not sure what this means.  I am running Windows 7.  I ran Malwarebytes and Super Antispyware and didn't have anything come up.   Novice computer skills here, so any help would be appreciated.

A:Notepad Error When I Reboot

Try the Microsoft Fixit.

8 more replies
Answer Match 38.22%

I've been using 7 RC Build 7100 since almost a year now. And suddenly, it's started giving me a BSOD, rebooting after that. The stop error :

*** STOP: 0x0000007E (0xC0000005,0x8523AE7A,0x88D1773C,0x88d17320)

System Restore, Startup Repair or using a disc image to restore the system does not work.
I tried booting in safe mode w/o command prompt or networking and it hung on CLASSPNP.SYS
It's an x86 version. Hope I can get help soon.
I know there are a lot of threads about this, but none of them could solve the problem for me. So ...

A:BSOD Reboot Error

  
Quote: Originally Posted by seven7seven


I've been using 7 RC Build 7100 since almost a year now. And suddenly, it's started giving me a BSOD, rebooting after that. The stop error :

*** STOP: 0x0000007E (0xC0000005,0x8523AE7A,0x88D1773C,0x88d17320)

System Restore, Startup Repair or using a disc image to restore the system does not work.
I tried booting in safe mode w/o command prompt or networking and it hung on CLASSPNP.SYS
It's an x86 version. Hope I can get help soon.
I know there are a lot of threads about this, but none of them could solve the problem for me. So ...



Hi and welcome
We realy need the dmp file that was created during the crash use these to find and upload http://www.sevenforums.com/crash-loc...d-problem.html

thanks

Kenn J+

8 more replies
Answer Match 38.22%

Today. I keep getting lsaass.exe reboot error.I scan my computer with spybot, adadware, and cwshredder.
First,It was this:

Faulting application lsass.exe, version 5.1.2600.1106, faulting module unknown, version 0.0.0.0, fault address 0x00000000.

then this cause me to reboot:
A critical system process, C:\WINDOWS\system32\lsass.exe, failed with status code c0000005. The machine must now be restarted.

Log:

Logfile of HijackThis v1.97.7
Scan saved at 8:05:45 PM, on 4/29/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\NORTON~1\navapw32.exe
C:\Program Files\STOPzilla!\Stopzilla.exe
C:\Program Files\Java\j2re1.4.2_03\bin\jusched.exe
C:\Program Files\Common files\updater\wupdater.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\AIM\aim.exe
C:\WINDOWS\System32\ctfmon.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\WINDOWS\system32\mmc.exe
C:\Program Files\Spybot - Search & Destroy\SpybotSD.exe
C:\Program Files\PeerGuardian pr14\PeerGuardian_1.99b_pr14.exe
C:\Documents and Settings\Neo\Desktop\HijackThis.exe
... Read more

A:I keep getting lsass.exe reboot error

Go to this link for fix.
 

1 more replies
Answer Match 38.22%

Hi there,

I have a Dell Inspiron N5040, and I'm looking to reset it to it's origional factory self.

I've followed the Ctrl + f8 command several times, but when "Repair your computer" appears and I select it, it then just starts my laptop up as normal. I'm assuming there's maybe something missing/faulty with my laptop? How would I go about fixing this?

I dread to over pay a computer technician, and as the laptop came with no discs, the thought of sighting making discs and downloading tons of programmes is daunting to me. I just want a quick fix, as this very laptop has been reset to factory state before, some time ago.

On a side note, and one of the reasons behind my inspiration to reset the laptop, my Final Draft programme is all of a sudden not opening my files. It takes me to an error message saying that I have to be an administrator to install the file, or something. Will it work if I uninstall/reinstall Final Draft?

Any help is appreciated. Thanks.

A:Factory Reboot Error.

Hi and Welcome to TSF!

Have you tired to follow this here: How to Factory Restore your Computer

5 more replies
Answer Match 38.22%

THE PROBLEMAnytime I reboot my computer, I get a window (twice): Rundll with the error message:Error loading C:\WINDOWS\Image.dllThe specified module could not be found.THE OFFERED SOLUTIONYou either are infected by spyware or you have used a spyware removal tool that only removed part of a nasty piece of spyware. Download, install, update, and run Ad-Aware and Spybot and let these programs remove all of the garbage that they find.http://www.lavasoftusa.com Ad-Awarehttp://www.safer-networking.org/index.php?page=download SpybotIf these programs don't solve the problem, go to the following site and follow the directions to download and run the analysis tool called HijackThis. http://tomcoyote.com/hjt/Generate a log file, then open it and copy and paste the text of the log file in a message in one of the following forums:http://subratam.org/http://www.zerosrealm.com/forums/http://www.bleepingcomputer.com/where a certified HijackThis expert can offer advice on how to fix the problem: SteveI HAVE RUN THE SPYBOT PROGRAM AS DIRECTEDTHE LOGLogfile of HijackThis v1.98.2Scan saved at 2:06:20 PM, on 9/17/2004Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\sv... Read more

A:Error Message on Reboot

Hi,

Having a look.

2 more replies
Answer Match 38.22%

I am getting error message at every reboot

"regrun -rootkits -boot watch partition Greatis Software"

Please advice me
 

A:Rootkit error at every reboot

Please help
 

1 more replies
Answer Match 38.22%

Hi,

I have vista home premium. I have an image and installed Virtual PC 2007.
When i try to start that image it is giving an error as

"reboot and select proper Boot Device or Microsoft Virtual PC error".

How to fix this issue?

Thanks,
Arjun.

More replies
Answer Match 38.22%

Get message: Runtime Error '429' ActiveX component can't create object.
 

A:Error during reboot of system

http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnanchor/html/scriptinga.asp

Go to the 'Downloads' and git the appropriate script for your OS.
 

1 more replies
Answer Match 38.22%

I swear if it's not one thing it's another with this system! I'm still trying to finish finding all the drivers to update my system, but now I'm getting an error that Says it's a Dr Watson Re-boot error. It states it can not finish post mortem due to... something something. UGH.

I know it's not much information to go on, I'll write it down next time it comes up, but I'm totally baffled by this. Has anyone else heard of it before & know what it is? I don't have a clue how to stop it coming up.

A:Dr Watson Reboot Error?

The POST is Power On Self Test which is the first thing that happens when you start you computer, it looks at all of the important components of your computer to make sure that every thing is in order before continuing to start the OS. The next time this happens please copy down what it says or make a screen shot and post it back here. You can also go into the control panel and Event viewer to see what errors are showing up at these times.

2 more replies
Answer Match 38.22%

I have tried the following to recover from this problem:

1) Acronis 2016 true image rescue disc

2) Easeustodo v9.2 rescue disc

3) Windows 10 generated rescue disc

4) Windows installation from CD via an widows.iso file

Option 4 tried the hardest to boot with a long period of disc read before failing.

Sorry can?t include a debug log since cant get it to boot

Background (hopefully helpful)

Windows 10 was installed on this laptop in August 2015. Major problems with 100% disc utilization.(see note on 100% disk utilization at bottom)

After 2-3 months of frustration a clean install of Windows 10 solved problem

9 months later July 2016

Windows was up dated to version 10586.494 .

I was suddenly confronted with 100% disc utilization again (not sure how long after update)
I suspected antivirus since it was implicated in the original problem a year ago but never confirmed.

I did a full disc recovery using ACRONIS and brought back 10586.318 all seemed well.

I also changed to Panda antivirus from Avast and all seemed ok for a week or two.

I updated again to 10586.494

I started testing out EASEUSTODO v9.2 backup for a friend. It failed during backup with a system freeze (behaving like the disk utilization problem)

Thereafter continued reboots resulted in disk utilization problem.

I decided to try a recovery and now go back to top of page.

NOTE disk utilization problem results in a system freeze with windows not responding error. Using taskmanager... Read more

More replies
Answer Match 38.22%

I get this error quite often on a restart or shutdown. Any ideas why I might have this?

Windows 10 Pro x64. Means my reliability graph is in the mud most of the time.

Description
Faulting Application Path: C:\Windows\System32\svchost.exe

Problem signature
Problem Event Name: APPCRASH
Application Name: svchost.exe
Application Version: 10.0.10586.0
Application Timestamp: 5632d7ba
Fault Module Name: ESENT.dll
Fault Module Version: 10.0.10586.212
Fault Module Timestamp: 56fa1686
Exception Code: c0000602
Exception Offset: 000000000022885f
OS Version: 10.0.10586.2.0.0.256.48
Locale ID: 7177
Additional Information 1: 9dfb
Additional Information 2: 9dfbe7df3f9a539fa5f4c0551d501195
Additional Information 3: ac7c
Additional Information 4: ac7c3d61a9b0a1d4db4e7deb036ad511

Extra information about the problem
Bucket ID: c6bde43b426d1eb21fa3fe78ed4b7723 (120448086418)

More replies
Answer Match 38.22%

Hi guys,

I just reformatted and reloaded my PC running Windows XP MCE 2005.
I am able to connect to my Mybook World Edition drive. However, there appears to be no option to reconnect at logon. The checkbox is gone. I am forced to logon the next time I turn on my PC. I rebooted the MBWE thinking it was pulling one of it's tricks. No luck. I created a new user and got the same results.
What's going on? All the other computers on my network still connect as before.

Rick
 

A:Mybook Reboot Error

I just reformatted and reloaded my PC running Windows XP MCE 2005Click to expand...

Have you updated all your Manufacture drivers to current release?

For more help please put your System Specs information in your Profile
 

3 more replies
Answer Match 37.8%

Hi, erm i seem to get this suprise shut down every 10 mins or so, a blue screen flashes up then goes away.. i presume this means a driver is currupt/not upto date. im on xp home sp1. I have recently installed a wireless network, and i think it may have something to do with that/priter driver. How can i check or troubleshoot where the issue is.

Cheers, matt.

A:XP sudden Reboot/Shutdown Error.

You may want to make sure all your drivers are up-to-date. Go to the Device Manager and make sure all hardware is properly installed. You might want to do it in safe mode because it may shutdown again. Another thing is uninstall the wireless network, install SP2 and reinstall.

4 more replies
Answer Match 37.8%

Ok, I posted a while back ago on a similar problem, or possibly the same problem. I hate to repost, or start a new thread, but it seems that this is the way it needs to be done. I thought I fixed it before. Well I didn't...it's back again... I have run and uploaded the SF_Diag Tool for someone to look at. This only seems to happen after a windows update then a Restart....for the most part...

I also ran Who Crashed and this is what it came up with:

On Tue 9/11/2012 7:37:54 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\091112-10483-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x4B09CC)
Bugcheck code: 0x124 (0x0, 0xFFFFFA800CBAC8F8, 0x0, 0x0)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.

Thanks in advance!

A:BSOD error (ntoskrnl.exe) at Reboot.

I'm new to BSOD analysis, but have you over clocked any hardware devices at all?

9 more replies
Answer Match 37.8%

It reboot very slowly, and after rebooting, a pop message displays, saying,, {the application or DLL C:\DOCUME- 1\ Network-1\ntl.dll is not a valid windows image. please check this against your installation diskette.]
Also, the START MENU BAR is longer showing .

pls respond to my complaint....
 

A:Slow reboot and error message

It sounds like you may be infected. Please go to our Virus and Malware Removal forum, read the UPDTED 8 Step sticky, follow the steps and then post on that forum with the required logs attached.

Good Luck.
 

1 more replies
Answer Match 37.8%

Hi from not so sunny England...

I have an Acer Travelmate notebook with XP Tablet edition that has worked o.k for just short of a year (bought Nov 24th 2004) and recently has started throwing up the above named error message on startup.

I have done some research and one article I found blames Norton GoBack (which I am running) for this error and another one says it is a hard drive problem.

I have been able to use GoBack to retrieve my data, but I now have to restore the drive to a previous point every single time I start it up.

I have tried to recover the HD to factory defaults using the System Disks and it seems to work ok for a short while. But when I start to reload other software, the same problem recurs.

I will be grateful for any advice or assistance anyone can offer...

Thanks


Alia

A:Load Error! Press a key to reboot...

Hello and Welcome to TSF

It seems the hard drive may be on its way out.
Find the make of the drive, go HERE and run the Hard Drive Diagnostics Utilities for your make.

2 more replies
Answer Match 37.8%

I don't know if this is the correct forum, or if it should be in security, but approximately 50% of the time when I shut down my desktop pc I get a message come up saying CL RC Engine3 Dummy Window is not responding and giving the option to end now.

Any ideas what is causing this and how I stop it?
 

A:Error Message on Shut down or reboot

13 more replies
Answer Match 37.8%

It reboot very slowly, and after rebooting, a pop message displays, saying,, {the application or DLL C:\DOCUME- 1\ Network-1\ntl.dll is not a valid windows image. please check this against your installation diskette.]
Also, the START MENU BAR is longer showing .

pls respond to my complaint....
 

A:Slow reboot and error message

Hi leslieraker :wave:

Welcome to :grinthumb

Since you posted your question in "Intros" it is very likely to get overlooked.
I would suggest reposting here... http://www.techspot.com/vb/menu46.html
While you are not describing a BSOD, it still may be the most appropriate spot.

A hint... Before posting, read the threads (topics) that are at the top of each menu.
You will find much helpful information there, including how best to make your post.

You may find these to be helpful links also ...

How to post a new thread in this Guide.

Before posting you should read all the Posting Guidelines.

To access technical support Forums.

Many users like to post system specs in their Profile.
System Specs are always helpful when you seek support, (see the first two suggestions).
And helpers may ask that you post some of your specs in your thread.

Other online TechSpot guides Here.

Enjoy your Stay
 

1 more replies
Answer Match 37.8%

I just bought a new PC with Windows XP. As I was loading all the software, plus re-establishing my BellSouth FastAccess DSL connection with the installation CD (this was an existing account), I must have done something wrong because now, whenever I load XP, even with an empty CD drive, I get a dialog box on my desktop that says the following:

(Title of the box is "Fast Access Installation Wizard Reboot Helper.")
"Please wait while your CD drive becomes active. If your CD was removed, please insert it."

I don't have to insert a CD; I simply close the dialog box and everything's fine.

How do I get rid of this pesky dialog box? I don't understand what within "msconfig" I need to uncheck in order to resolve the problem.

Thanks for any advice.
 

A:CD reboot error message upon XP startup

Have you tried inserting the Fast Access Wireless installation CD and seeing if it does anything with it?

It sounds like the installation was not complete.

This is not a "Windows" message, per se, but something associated with that particular software install.

If it does nothing, try reinstalling the software and leave that CD in the drive through a reboot.
 

2 more replies
Answer Match 37.8%

Hey whenever I reboot my comp I get this error

there is no disk in the drive, please insert a disk into drive \Device\Hardisk1\DR1

But if I hit cancel it works fine... Anyone know what is wrong?
thanks
 

A:reboot comp error very weird

Is this a blue screen error? What operating system are you using?
 

1 more replies
Answer Match 37.8%

System Specs:
2 x 2.6 Xeon CPU
2 x 160gb SATA Western Digital Hard Drives - RAID
2 gb pc2700 DDR Ram
Supermicro 1u case/motherboard
Windows 2003 Standard Server

Here's the problem:
The server has been experiencing very inconsistant problems upon reboot. We're receiving the all so popular "REBOOT AND SELECT PROPER BOOT DEVICE, OR INSERT BOOT MEDIA IN SLECTED BOOT DEVICE AND PRESS ANY KEY" error, but it's not happening every time the system loads up. This system is new and I can vouche that this is not anything to do with the OS since it's been present for both OS installs (XP + Win2003) since the birth of the server. The server randomly won't restart, then after a few retries it loads without a problem. Usually the problem exists only upon reboot, but last night we noticed that the system was unpingable and had crashed, when we called our datacenter for help they informed us of the current state the system was in with the above error. Since we've had this error before and usually can get past it by a few reboots, it's a tough call. Right now the box is down and we can't get it back up. We lost control of our remote card as well.

What we've tried so far:
Browsing around various forums, I notice this error is a common one, but everyone has their own situation. I've tried disabling the PXE in the bios and rearranging the boot device order. Also we've swapped the drives and the system loads fine. It's difficul... Read more

More replies
Answer Match 37.8%

I recently ran the manufacturer's Restore Disks on a 5 year old WinXP desktop then updated to WinXP SP3 and reinstalled the same programs I had been running other than a switch from AVG antivirus to Avast. On reboot, I now sometimes, not always, receive this error "Load Error. Press a key to reboot". Pressing a key only regenerates the message. This occurs on the 4th boot screen which is the one which normally shows Windows starting. The first screen is mem check. The 2nd screen is black with various messages as usual. The 3rd screen is the Norton Goback screen. The 4th is where Windows normally starts but that is where the error message comes up. I am able to use GoBack to restore to an earlier point and get the machine running. It will then sometimes reboot normally, sometimes not. I will appreciate any and all help. Thank you.
 

A:Load Error. Press a key to reboot

Well as your reinstalling all these programs fresh they'll all want to update and while updating to SP3 may have caused the load error its probly caused by some new updates not getting along with others try restoring the computer and add the programs 1 by 1 and when u get problems youll know whats caasing them. You may need to keep older versions of some programs.
 

3 more replies
Answer Match 37.8%

Hi I'm really hoping to get some help here.

I'm getting a LOT of error messages and having to reboot all the time. Let me see if I can explain what is happening...if my explaination isn't clear..please ask me the questions you may need to know to be able to answer me Thanks.
These things happen radomly.

'When oppening an application I get: Application failed to initialize properly.'

Or "not enough quota is avialbe to process the command'

I use PCcillen and have had tech support did an hour going through my computer and have stated that there are 'no virus's'.

Outlook: Sometimes when I go into find a file I get this type of error:

Application or DLL C:\Program Files\Common Files\Sytem\MAPI\1033\outex.dll is not a valid windows image. Please check this againt your installation diskette.

(This not a valid windows image also occurs randomly) For outlook I have run the repair with orgianal disk.

I have had browsers just 'close' I thought it may have been a fault with a particular browser however it happened to IE, Firefox and Safari. Don't know if these are related to the above.

Now another strange occurrence is the 'top blue bar' of a browser seems to 'disappear' into thin air - if that makes sense - so it's hard to find the X button.

Any ideas? I am running Advanced Windows Care (latest version) for registry fixes almost have to do that twice a day or more. (Computer is only 12... Read more

A:Error Messages, Have to constantly reboot. Help!

16 more replies
Answer Match 37.8%

i have a toshiba laptop satellite M35-S359 when i start up this is the only thing comes up on the screen. i have used my recovery disc and it went thru the recovery like normal and then when it tells me to remove the disc and press any key to continue it reboots and comes right back to the same load error! press a key to reboot... i use windows xp sp2
 

More replies
Answer Match 37.8%

Hi folks,

History:
Yesterday I installed W7 and all working ok. For resons I wont go into I decided that a re-install (as so little info was in the o/s) was easier than trying to solve admin/user issues.

Setup before re-install:
My HDD has 3 partitions and some unallocated space
Partition 1 - System Reserved 300 Mb (NTFS, Primary, Active)
Partition 2 - Windows 7 400 Gb (NTFS, Primary)
Partition 3 - Vista Image from another HDD 150 Gb (NTFS, Primary)
Unallocated space - approx 400 Gb

Prior to beginning the renstall W7 was stable and happy. I could also dual boot happily into Vista on the other partition using the Win boot menu.

Re-Instal Process:
Went into Partition Wizard Boot CD and then wiped both the Sys Reserved partition and the Windows 7 partition (i wrote 0's to both)
I then formated both of these partitions using PWBD
Lastly I ensured that the Sys Res partition was Active (which it still was from last time)
I then re-booted using the W7 install DVD
It went through the instal process quite happily until the first re-boot is needed.

At this point during the previous and sucessful installation on Sat, upon booting up it said 'press any key to boot ffrom DVD drive' so i left it and it then booted from the HDD and carried on with the W7 install for 5 more mins and was done.

However this time, I got the same message about booting from the DVD and again I left it and nothing happened. After 5 mins I gave up and hit a key and it just said disk read error and hung on a... Read more

A:Disk error after 1st reboot in W7 re-install

Hello Matt.



Do the wipes again, it's always best to have the best possible space to install Windows 7 to.


If the Windows 7 install disk is one you burned yourself it may be a bad burn and needs to be done again, if so this would be the first thing to try.

Use the free ISO burner at the link below to burn another at a speed of now more than 4x and select to let the program to verify the disk before it finishes.

ImgBurn Free ISO Burner

9 more replies
Answer Match 37.8%

For the past few weeks, my computer has automatically rebooted, restarting with a Serious Error message. I have installed all new drivers available and run Nortons programs, including Antivirus. I still get this problem on an intermittant basis. Help!
 

A:Constant Reboot and Serious Error Message.

16 more replies
Answer Match 37.8%

I recently reinstalled Win2k and got my first STOP error, I'm not actually querying about that, I'm sure it was down to shoddy webcam software I was playing with at the time.

What I'd like to know is if there's a setting in the registry or something I can do to force it to reboot. It's been checked in 'system/advanced/startup and recovery' since 2k was installed, yet seems to be ignoring this.

Any ideas?

Cheers
 

More replies
Answer Match 37.8%

I am attempting to clean a HP G72 laptop, OS Windows7 Home Premium.  User was not reading webpages completely, therefore was unaware that bundled software packages were being loaded onto the computer until it did not respond in the expected manner.
 
I uninstalled PC Fix Speed and a number of PUPs using uninstall in Programs and Features and have disabled addons for all PUPs in IE. IE is still going to dosearches.com for home page and I am unable to change this in IE options.  I have run Malwarebytes, removed selected entry, but there are a lot of registry keys listed that probably need to be deleted or changed that were not selected. 
 
Any assistance would be greatly appreciated.

A:Error on Reboot After Removing Malware

Hi charismatic100,
 
Can you expand on the title (i.e. what does the message say) as this will help me figure out how to deal with it?
 
Also, run these for me:
 
Please download AdwCleaner by Xplode and save to your Desktop.
Double click on AdwCleaner.exe to run the tool.Vista/Windows 7/8 users right-click and select Run As Administrator.
Click on the Scan button.
AdwCleaner will begin...be patient as the scan may take some time to complete.
Click on the Clean button.
Press OK when asked to close all programs and follow the onscreen prompts.
Press OK again to allow AdwCleaner to restart the computer and complete the removal process.
After rebooting, a logfile report (AdwCleaner[S#].txt) will open automatically (where the largest value of # represents the most recent report).
Copy and paste the contents of that logfile in your next reply.
A copy of that logfile will also be saved in the C:\AdwCleaner folder.
--------- Please download Junkware Removal Tool to your desktop.
Shut down your protection software now to avoid potential conflicts.
Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administrator".
The tool will open and start scanning your system.
Please be patient as this can take a while to complete depending on your system's specifications.
On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
Post the contents of JRT... Read more

13 more replies
Answer Match 37.8%

Hello
I get this error on every reboot in the events log.Does anyone here know what it is or how to fix it thankyou

Log Name: System
Source: Application Popup
Date: 22/06/2010 22:58:57
Event ID: 1060
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: danny-PC
Description:
\??\C:\Windows\SysWow64\drivers\mdvrmng.sys has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.
Event Xml:

A:event view error on every reboot

Update the driver. That should resolve the issue

6 more replies
Answer Match 37.8%

I keep getting random BSOD but often miss them, the only reason I know they occurred is that when I get to the computer it says insert boot drive and try again (or something like that sorry), pressing any button just repeats the message. I have to hit the power button to turn it off then on again. I've tried running all sorts of scans, but am at the end of my knowledge. Any help would be greatly appreciated.

A:Multiple BSOD and reboot error

AdNazzyP welcome to SF!

The file you uploaded doesn't contain the dump files, but I went looking anyway and found these in the event log:

Code:
The driver detected a controller error on \Device\Ide\IdePort2
This usually mean a port on the motherboard is going bad.

You may swap ports with a free one, and see if that does it.Take Note!
By opening the side of the case you may VIOD your warranty!Please consult your system manufacturer!

To check the HDD for errors:
Download | Crystal Disk Info and post a screenshot.
Run | Disk Check
Then Follow | Check Disk (chkdsk) - Read Event Viewer Log

9 more replies
Answer Match 37.8%

I have the following error message coming up every time I reboot. I have tried to run CCleaner to get rid of it. I also did a System Restore back to a date prior to the time the file appeared. I think the error message started coming up after I downloaded, and deleted, several copies of the setup (.exe) file for VLC Media Player. I deleted several of these before I got a working copy of VLC.

The error message says:

Could not load or run C:\Users\Ella\AppData\Local\Temp\csrss.exe specified in the registry. Make sure the file exists on your computer or remove the reference to it in the registry.

I would like any advice as to how I can get rid it it.

A:Error message appears when I reboot.

Hi -

csrss.exe is located in \windows\system32

I suggest that you have your system reviewed by a Security Analyst.

Please follow these steps - NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help - Tech Support Forum

Regards. . .

jcgriff2

`

1 more replies
Answer Match 37.8%

Hi,
My computer recently kept rebooting. When I disabled the reboot and got the BSOD it said it was a C000021a Fatal error at logon f 0xc0000034. I've read most of the solutions on here and have done the XP repair as if it were upgrading. I've done fixboot, chkdsk /P , chkdsk /R, but I haven't done Fixmbr. The reason is it says that my drive has a non-conforming name or something like that. My drives for the single HD that I split into two is F: and G: I had a C: drive go bad and then added the operating system on to my current one so I could rescue C: and could never switch it back to C: Will fixmbr ruin my HD for good? Also, I don't think it is the hard drive. It is a ATA but I tried a SATA drive that has XP on it and it comes up with the same error. I also have 4 GB of memory on a Gigabyte board that holds a Quad Core Pentium. Also, safe mode doesn't work it still reboots. When I did the pretend upgrade repair with the boot disk of XP it did let me get to the desk top before freezing with no icons and no task bar at all at the bottom. Now it won't even get back to that.

Any suggestions?

Jason

A:XP Continues to reboot error c000021a

No one knows how to fix this one? 47 views and no one? Help please

5 more replies
Answer Match 37.8%

I am receiving this RUNDLL error message whenever I reboot my computer,
which operates using Windows XP:
"Error loading C:\PROGRA~1\NEWDOT~1\NEWDOT~1.DLL
The specified module could not be found"
There doesn't seem to be any further problem after my computer starts,
but I would like to take care of this error. Can you help?
 

A:Help, I get error message each time I reboot

8 more replies
Answer Match 37.8%

hi,

I have a problem on my laptop 'fujitsu siemens esprimo mobile', running win xp prof, version 2002, xp3.
Sometimes windows crashes and shows a big green screen with a lot of text. Unfortunally, it disapears in less than 1 second because of an instant reboot. Anybody an idea to be able to read the text on the screen, like how to prevent that reboot.

Kindly,
Paul1963
 

A:random error screen and reboot win xp

Usally that screen is blue?...

ok first you need to run chkdsk, you can do this by rclick on ur C: drive - properties - tools tab - error checking, 'check now', it will want to check after restart, restart ur pc.

next make sure ur antivirus is up to date and do a scan.

see if this helps, you could also reinstall your OS (windows) back up your files first

there are allot of things that can cause problems like this, hardware and software, uninstall anything that you have installed recently ie. before the problem started
 

2 more replies
Answer Match 37.8%

Whenever I startup for the day, my computer will get to the desktop and then restart. It happens at a lot of different times though: Immediately after the windows logo, 20 seconds into the desktop loading, 5 seconds into the desktop loading. Regardless, it does this only once, then the computer will boot up and run fine.

I've already tried cleaning up my registry, but maybe I don't know what to look for. I'm also hooked up to my TV through S-Video (using it as a monitor), But I don't have a monitor to test and see if that is a problem.

Any help is appreciated.
 

A:Wierd boot/reboot error

:bump:

Also, I think it is something wrong with the new 9800pro. Today, it stayed on the blue screen that it usually just flashes up, and it said it Shutdown windows to prevent damage to my computer. And then something like "Proceeding with memory dump".

Any ideas what's going on?
 

2 more replies
Answer Match 37.8%

I have had this issue for weeks and after countless hours of trying to fix it and figure out exactly what the problem is...I have now come to find some aid on this forum.

Quick Overview of the issue:
I constantly get a Blue Screen error (BSOD) when starting up Windows 7; it always happens after showing the "Starting Windows" Disk Image and always gives me the same BSOD error. I am only able to get back into Windows by running the Startup Repair Tool (sometimes it takes more than one time to repair and even maybe a system restore).

After the most recent BSOD, I wrote down the error message I got upon logging into windows. It stated a BCCode: 6b. I have no idea what that means...

I have tried running a chkdsk and an sfc /scannow but have had no luck with either of those. I really need some help with this.

System Basic Specifications:
Windows 7 Home Premium OS
Service Pack 1
64-bit
Intel(R) Core(TM) i5-2410M CPU @ 2.30GHZ 2.30GHz
6.00 GB RAM
Manufacturer: Lenovo

I have attached the minidump files and the Resource Preformance HTML.

A:BSOD on Windows 7 reboot, 6b error

Any part of the disk subsystem can cause the PROCESS1_INITIALIZATION_FAILED bug check, including bad disks, bad or incorrect cables, mixing different ATA-type devices on the same chain, or drives that are not available becuase of hardware regeneration.
This bug check can also be caused by a missing file from the boot partition or by a driver file that a user accidentally disabled in the Drivers tab.
Does it do the same thing in safe mode (F8)?

9 more replies
Answer Match 37.8%

Dear all,

I installed windows 7 32 bit version and after it worked fine for a couple days, I installed some software etc.

1 GB RAM DDR2
2.2 dual core AMD athlon processor
175 GB Harddisk SATA.
Creative audigy SE sound card
Geforce graphics card.
Couple years old, and windows 7 now installed for the first time.

And now suddenly it started saying "critical error in windows, windows is rebooting in 1 minute. Safe all your files"
And then it rebootes and then it gives the error again after around 30 seconds when it is in windows itself.

I have no idea what it is and the repair option didn't find the answer it said it is unsolvable via the repair function and it is an unknown problem.

How/where can I see why windows keeps rebooting?
And when I do a new system install, do I then keep my files or will the HD be formatted?

Also I can't get into safe mode via F8 and I just noticed when I unplugged the network cable for internet that I get a message from windows firewall that it asks if 80899.exe should be allowed, and I don't get the critical error now.
Already a virus in such a short notice?

Constantly also getting the error:
"80899.exe stopped working"

A:Critical error reboot loop

What was the software you installed exactly?

And does the same thing happen if you boot in to safe mode?

2 more replies
Answer Match 37.8%

I receive the following error message each time I reboot my computer:

IGFXEXT module stopped working and was closed. I am using Windows Vista Premium O/S on a new computer.

Any suggestions would certainly be appreciated in helping eliminate this error message.

Thank you in advance for your assistance.
HankL
 

A:Vista Error Message On Reboot

I sure hope your new pc came with Vista preloaded...

If so, call the pc vendor and see what they can do for you.

My money is on a driver problem or software conflict...
 

2 more replies
Answer Match 37.8%

I'm trying to fix a friends computer, When I turn it on I get the following stop error bsod

DRIVER_IRQL_NOT_LESS_OR_EQUAL

STOP 0x000000D1 (0x804E2F08,0x000000FF,0x00000001,0xF97EA90B)

ntndis.sys - Address F97EA90B base at F97EA000, DateStamp 44271923

I did a search for ntndis.sys and found information about W32/Forbot-GI, so I guess this is a worm.

I can't scan the computer to get rid of it because I can't get past the bsod stop error, I tried booting in safe mode but the start menu is gone, along with the system tray. The only thing I can do in safe mode is open task manager. I'm thinking about a complete restore, anyone got any better ideas?

A:Stop Error On Reboot Ntndis.sys

IMPORTANT NOTE: ntndis.sys is a Trojan/rootkit component. Backdoor/IRCBot Trojans are very dangerous because they provide a means of accessing a computer system that bypasses security mechanisms. Remote attackers use backdoor Trojans as part of an exploit to to gain unauthorized access to a computer and take control of it without your knowledge. If your computer was used for online banking or has credit card information on it, all passwords should be changed immediately to include those used for email, eBay and forums. You should consider them to be compromised. They should be changed by using a different computer and not the infected one. If not, an attacker may get the new passwords and transaction information. Banking and credit card institutions should be notified of the possible security breech. Although the backdoor Trojan has been identified and may be removed, your PC has likely been compromised and there is no way to be sure the computer can ever be trusted again. It is dangerous and incorrect to assume that because the backdoor Trojan has been removed the computer is now secure. Many experts in the security community believe that once infected with this type of Trojan, the best course of action is to reformat and reinstall the OS - "When should I re-format?". For XP users, the easiest thing is to do a System Restore and choose a restore point with a creation date before the date of infection. In your case it would be easier to use System Restore f... Read more

6 more replies
Answer Match 37.8%

Hello,
In the past week I've suddenly started having a lot of problems with my Gigabyte P35K-CF2 laptop (purchased in Dec 2013, OS Windows 8.1 64-bit). At any given time regardless of what I'm doing with it, the computer will freeze for a couple of minutes max. The mouse cursor still moves but I can't click anything and the keyboard won't respond.
In addition, during startup the computer may get stuck in a loop of errors and reboots (the errors include INACCESSIBLE_BOOT_DEVICE and IRQL_NOT_LESS_OR_EQUAL). The startup time has also increased significantly from when the device was new, from sub 10sec to around half a minute. Also, today when I figured a fresh re-install of Windows might help, Windows' reset feature complained that the required partition is missing.
I've always installed updates via Windows Update and Gigabyte's Smart Update, and have never deleted anything from the boot SSD's Windows folder. Up until now the laptop has been fantastic and I've really enjoyed using it, but now I'm at a complete loss. Please, can you help me get my laptop back into working condition?
Sincerely,
DrDivi, Finland
 
EDIT: Just now I had a BSOD with IRQL_NOT_LESS_OR_EQUAL (iaStor.sys), could this be a hint of what needs to be done?

A:Freezes and error/reboot loops

Hello,Please see my previous question "Freezes and error/reboot loops" for the development of my current situation, which has gone from bad to worse.In short, the laptop (Gigabyte P35K-CF2) was constantly freezing and/or showing BSOD either during booting or when Windows was already running. A couple of times the BSODs specifically mentioned iaStor.sys, but mostly it was just inaccessible boot device or irql not less or equal. I couldn't even refresh or reset the system because the recovery partition could not be found.So, I finally tried resetting the Windows installation after changing the SATA configuration in BIOS from AHCI to IDE. The system was reset normally and I managed to install the first set of Windows updates, although the laptop now worked quite slowly. However, after downloading the 8.1 update I haven't managed to boot Windows at all whether in IDE or AHCI mode. Now it doesn't BSOD but won't load Windows either. Is the booting SSD dying or something? Is there anything that can be done? Sincerely, DrDivi, Finland

1 more replies
Answer Match 37.8%

Hello Sevenforums!
I am a recent BSOD survivor because of these forms and your helpful member Writhziden. I have been BSOD free since my last post on this thread (http://www.sevenforums.com/crashes-d...x0000000a.html) Until recently.

The last 2 days I have had a few different BSOD crashes. Unfortunately I was not expecting them and had my settings reboot after a BSOD. Because of this I was unable to catch the error codes.

I have attached the Grab all report below. Thank you all in advance for your time and for being such a great BSOD troubleshooting tool.

Sincerely,
Kyle

A:Starcraft 2 BSOD reboot error

Code:
BugCheck 124, {0, fffffa80061ef8f8, 0, 0}

Probably caused by : AuthenticAMD
Stop 0x124 is a BSOD which is a hardware only related cause, and therefore it will be necessary to run some stress tests, however, from the other BSOD you have had, it commonly points to a graphics card driver or the Video RAM of your graphics card.


Code:
BugCheck 10E, {1f, fffff8a00c1f4460, 0, 3d022}

Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::ReferenceAllocationForSubmission+148 )

Code:
Usual causes: Video driver, Video memory
Test the graphics card RAM and stability:NVIDIA/AMD Video Card - Test with OCCT
Read all the steps within the hardware test tutorials very carefully, as stress tests is designed run components to their maximum capacity, in order to point out failing or faulty hardware components.
You can you use this program to monitor the temperature during the stress test:CPUID HwMonitor

9 more replies