Tech Problem Aggregator

"Insufficient disk space to fix the security descriptors data stream."

Q: "Insufficient disk space to fix the security descriptors data stream."

Hi everybody, I've made a lot of progress with this external drive, but I seem to be stuck now.

-------------------------------------------------

Unidentified problem with 3TB external drive (USB 3.0 enclosure) that the computer suddenly started treating as RAW. Spent the last two weeks running CHKDSK /r repeatedly. Slowly got through many hundreds of indexing errors. Now I get as far as "verifying security descriptors (stage 3 of 5)," but I seem to have hit a wall here...

CHKDSK won?t go any further because there is "Insufficient disk space to fix the security descriptors data stream."

Microsoft?s advice (Error Message:) is of no help to me. They say to ?delete some unneeded files from the disk and try again,? which doesn?t help me since I can?t get the drive to mount or stay mounted long enough to copy the files onto a different drive.

-------------------------------------------------

The drive behaves differently each times I power up its enclosure, but it is usually one of these things:

Drive doesn't mount.
Drive mounts after a few minutes. I see a generic "Local Disk L:" in Windows Explorer but, when I try to explore its folders, the computer takes about 15 minutes trying to read it (I can see the progress bar moving slowly across the top of the screen), and then says that "The parameter is incorrect." Drive disappears from Windows Explorer.
Drive mounts after a few minutes. I see the full Volume name that I originally gave it, and can see all of the folders/subfolders. However, I cannot open or copy any files from the drive ? on the few occasions I've gotten this far, I tried to copy some files from the drive to a different drive (thinking that I could free up some space and maybe get further along in the CHKDSK process). I hit "Copy" on a single folder on the bad drive, and then hit ?Paste? on my target drive. The computer spent an incredibly long time "calculating" the file names/sizes. Hours later, there was a new error message: An unexpected error is keeping you from copying the file. . . . Error 0x800704fD: The request could not be performed because of an I/O device error.? I clicked on "Try Again," and got the following error message: An error has occurred. The destination you have specified does not exist . . . The drive had already dismounted.
---------------------------------------------

Sometimes, after the drive mounts, I run CHKDSK but it says that the drive is RAW.

Then I?ll power-cycle the enclosure and try again, and CHKDSK says that the drive is NTFS and run its course... until I get to the "Insufficient disk space to fix the security descriptors data stream" message. Then I'm back at the command prompt, and I must power-cycle the enclosure before I can continue.

Sometimes, when the drive finally mounts, I now see a frame pop up, asking if I want to ?scan and fix? the drive. I tried it once but the system hanged and the drive eventually dismounted. Now I just click on "Continue without scanning."

---------------------------------------------

I?ve tried plugging the drive into internal bays inside two (2) different desktops (each running Win 7 (x64) and UEFI), but it is never recognized by either computer?s BIOS, Windows Explorer or ?Disk Management.? My only success, thus far, has been via the external USB 3.0 enclosure.

--------------------------------------
This is my dilemma. The folders/files all appear to be on the drive, but I can?t get the drive to stay mounted long enough to copy anything onto a new drive in order to free up enough space for CHKDSK to finish.

What can I do here? Any thoughts or advice? Would using a different CHKDSK option make any difference? Is there any way to get the computer to use C: drive space to complete whatever tasks it can't complete on the external drive? Thanks!!

A: "Insufficient disk space to fix the security descriptors data stream."

Someone? Anyone?

8 more replies
Answer Match 85.8%

I used Creative Lab's Wave Studio for years with a single problem.

I loaded it onto my sister's computor and the first time I tried to save a file, I got an error message saying:

"There is insufficient disk space to save (file name)."

She had several gigs of open space so I just chalked it up to something funky of her PC.

A few weeks later, my HD crashed, so I installed a new one and re-loaded my software. When I fired up my Wave Studio (version 4.02), I got the same message. Now I had roughly 75 GIGS of free space.

I'm not a newcomer to the world of software troubleshooting, but this one has me stumped.

Any help would go a long way to restoring my sanity.

Rich
 

More replies
Answer Match 84.6%

I recently reformatted my windows xp home comp. I have two external 250 GB Maxtor 5000xt USB drives attached as Fand G. After getting everything started back up, I discoverd that my drive letters had swapped. No big deal. The drive that is now labeld G: has a lot of programs and data that i need to access. I can view files on this comp, listen to mp3's etc... but I run into problems when trying to copy files from G to write to other drives on the comp. Sometimes I'm successful and other times the computer really hangs up and gives write fail errors. When i run chkdsk, it gets to stage three and gives the following message, "unable to read the security descriptors data stream error"
Check disk has effectively not been successful therefore i cannot defrag the drive. I suspect that the drive is highly fragmented but windows says that i cannot defrag until after chkdsk runs.
Any help will be appreciated.

Thanks in advance,

VC
 

A:unable to read the security descriptors data stream error

Has any one seen this problem? Certainly I can't be the only one with this problem.

Thanks in advance,
VC
 

2 more replies
Answer Match 103.32%

Hi, new user here.

Well, bought an used notebook with some car diagnostics software on, and a hardware USB-interface.
The laptop though, runs a Windows 7 x64 Enterprise, which i believe is a "copy". The machine got a OEM Windows 7 x64 Pro sticker underneath.
Did try the downgrade trick, mentioned allover this forum, but for some reason it does not work.
I had to uninstall SP1, as I didn't have a SP1 DVD ready on hand.

When running the compabilityscan, I get the following error; (roughly translated from Danish)

"There is not sufficient discspace in partition (G . There must be at least 15 MB free space."

Note: Partition G: is a partition on 100 MB created by the Windows installation. Theres ~200 gig free on my SSD, which also held the G:, when the installation is started.

Any clues what to do from here?

Thanks.

A:Windows 7 x64 "downgrade" - Insufficient disc space.

Bump..

Is it really possible, i'm the only with this problem?

1 more replies
Answer Match 103.32%

My HDD shows 21GB+ free yet MS Word will not save and says "Insufficient memory. Not enough disc space". Norton AV and Trend Micro scans detected no virus, Add-Aware and Spybot found nothing either.

Had a quick read about [email protected] or [email protected] on Symantec's site and their fix warns that I may have to re-install Word afterwards.

Is there any way I can confirm this is the problem before I try their removal tool?

I have Word 2002 btw, any help will be appreciated,

TIA
 

A:Solved: MS Word says "insufficient mem. not enough disc space"

8 more replies
Answer Match 98.28%

I have almost 2 Gb of music on my computer that I'd hate to lose. And hate to have to rebuy or redownload too.

So what I'm wondering is... can I back up all that music on 3-4 700mb disks as a data disk instead of making a 70 minute music disk?

I have Sonic RecordNow that I use for music burning and data backup. I'm just wondering if it is possible to back up 1/3 of it in a folder as a data disk, and do the same for the other parts.

Possible? Would this work?

It would make much more sense to have 4 disks that although you could not PLAY them in a CD player as the songs would be stored in a folder on it, to just be able to copy them out onto another computer instead of making 20+ audio CD's.

Would my idea work? Help me out guys...
 

A:Backing up music as a "data" disk instead of a "audio" disk? Possible?

7 more replies
Answer Match 97.02%

Hello,

Burned jpg's to CD, but when I viewed them using ACDSee, the bottom half of most of the pictures are black - with a message that the data stream is corrupt.

I recall seeing that some of them were like this before I burned them to the CD, but many more of them are now affected.

Would it be better to save them in a different format? Could it be because they were put through DCEnhancer before being saved, or because I edited them through ACDSee?

This is a real pain as half of my pictures are useless.

Thanks for any thoughts on this.

Bye,
Penny.
 

A:Fujicam - "Data Stream Corrupt" Error Message

Just bumping this query - Has any one any ideas, please.

Thanks,

Penny
 

3 more replies
Answer Match 96.18%

Here's the story. I bought this new Samsung 840 250GB SSD.
I first did a clean install of windows 7 on it and it worked fine. Windows installed without much problem and everything. Then something didn't look right about the partitions. It looked like because I had all my HDDs connected while installing windows on the SSD the windows created the system reserve on the old HDD rather than the SSD. So I went back and decided to start from scratch with all the HDDs except for the SSD disconnected. I tried reinstalling windows on it but this time it didn't work. I tried formatting the SSD and it just gave me an error saying windows couldn't install on a GPT disk. I went into bios, made sure the PC was booting from the UEFI DVD drive and it still kept giving me the same error.

So I then booted up my old HDD. I tried formatting my SSD and now I can't delete the partition!
This is what my disk set up looks like:


If I click "extend volume" on the "New Volume (G" disk, it says "there is not enough space on the disk(s) to complete this operation".
If I try to create a "new simple volume" on the "unallocated" partition, it says the same...

Have I destroyed my new SSD now?! I just want it to work like a new clean disk...

A:If I try to "extend volume" it gives "not enough space on the disk(s)"

Hiyya Tracing try doing it with Partition Wizard mate Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition.
Brilliant tool if you can't do anything with the partition them just wipe the disk mate and start over with this SSD Alignment

1 more replies
Answer Match 94.08%

[solved]
Cannot import to registry.. "Not all data was successfully written to the registry. some keys are open by the system or other process, or you have insufficient privileges to perform this operation"

More replies
Answer Match 93.66%

every time i try to open one of this folders a window apears with this content
cant have acces to C:\Documents and Settings\Mike\Local Configuration\{one of these folders} acces denied
this affects my IE i cant download nothing thru IE all my files on that locations i cant set dispaly pictures on WINDOWS LIVE messenger and all thinks that has anything to do with those folders
any suggsestions or idea
hope you can help me
pd ive scanned my computer and its all clean also i cant install windows XP serivce pack 2 im kinda stucked :/
 

A:cant open "temprorary files" "aplication data" "program data"

11 more replies
Answer Match 92.4%

I have an entire column of data that I need in one cell. When combined I need each piece of data to be surrounded by " " and a , between each one.

151
183
2001

results = "151","183","2001"
 

A:Solved: Excel Column of data place in one cell with "data", "data" results

ASAP's "Merge row data" ("Columns and rows" category) will do 99% of the work for you.

http://www.asap-utilities.com/

(edit: "entire column" -- do you mean full from top to bottom? )
 

2 more replies
Answer Match 90.72%

Hey there forums! My brother has been cleaning up his SSD. And he realized there is something that he can't see on it. There is almost exactly 18GB of this "Mystery Data" on it. And he can't figure out where it is! Could someone here help us out? (And yes, we do have the hidden file option enabled)

http://i.gyazo.com/ca1a5339022dcf63babaa93bc660992d.png
http://i.gyazo.com/52a864af60e38cec8922dce18d87b266.png

A:"Mystery Data" is taking up 18GB of space on my SSD

Install TreeSize Free.
Open Control Panel, Folder Options.
Click on the View tab.
Select or unselect choices as necessary so it looks like this:Click Apply then OK. Start TreeSize Free. Click on Scan and select the drive you want to look at.TreeSize Free will show you where all the space is being used.

5 more replies
Answer Match 90.3%

This morning when I attempted to use my computer, any application (IE, OE, everything) I tried to start gave an error message (paraphrasing) “Insufficient resources exist to complete the requested task.” I thought a reboot was in order and when attempting that got “you do not have permission to shut down this computer” or something similar.

After unplugging and rebooting everything seems normal, but I’m going to run AV, anti-spyware and Windows Malicious Software Removal Tool.

Event log shows an error at the same time “the server was unable to allocate from the system nonpaged pool because the pool was empty”. Server? I’m not networked to a server….I’m sure it means something else, but what?

Recent software changes: Deleting MS Antispyware due to inability to upgrade to their new Beta 2 Defender (something do to with GDI, which I tried to fix by following info on the MS site), and downloading some critical updates from MS.

I’ve done searches on the errors and the answers don’t apply. I’ll probably revert my HD with an application called GoBack if the scans don’t find anything but thought you people might know what caused this.

Win2K is my OS.

I'll be checking for responses as I can't get response notices due to my ISP.

Thanks in advance,
Randall
 

A:"Insufficient resources" and "you don't have permission" errors

6 more replies
Answer Match 89.88%

I just bought a Samsung 840 and tried to use their data migration software with a standard USB 2.0 external enclosure (it didn't come with the USB cable it's supposed to). It gave me the attached results. Does anyone know why it thinks 405GB (or 437 with the additional 32GB it requires) is greater than 465? (Sorry if this is in the wrong forum.)
 

A:Samsung Data Migration (SSD) - "not enough space"

It's likely looking at the disc size, not the space used. That's typical of most software for that purpose.
 

3 more replies
Answer Match 88.62%

I'm hoping this is a simple fix. I'm trying to fix my elderly uncle's Asus laptop. System Repair pops up and fails. I booted to command prompt and found out it may be hard disk space. 400+ GB Hard drive (only one drive) and there's only 1024kb Free. I'm thinking that could be the issue. Hardware was checked out at the computer store and is fine. But they were going to charge him $200 to fix this failure to boot up issue. I told him to let me try first.

Can I possible "compact" this drive from the command prompt screen?


Note: I have no other Win 7 systems, so can't create a disk, and I have no original disks.
Also, no restore point has ever been set, and there are no partitions on the drive.

A:"Startup repair" failing - hard disk space issue?

Normally, I'd tell you to download a program or two to examine what's using the space or to clean up unnecessary files.

But with only 1024 kb of space, you probably can't install anything.

So--try this:

Start button, search box, type in "disk cleanup" and then poke the disk cleanup listing that shows up.

Let it clean up the drive and report back with how much space you then have.

You'll see an option in disc cleanup where it asks if you want to clean up system files as well. Say yes.

It should calculate how much space it will recover.

Let it run to completion. Might take a few minutes.

Then check your recycle bin to see if it's empty.

Report back with available space.

9 more replies
Answer Match 88.62%

I have a C: drive which I want to increase in size. Under disk management there is 20GB of "Free space" - (right next to the C: partition). But neither disk management or EASUES partition manager will allow the partition to use this space. How to I change "free space" to "unallocated" so that it can be used ?

A:Cannot extend volume (disk management) although "free space" exists

Can you post a snip showing what you have? An image makes it easier for us to help you. For example, you said that there was 20GB of free space next to your C: partition. What you didn't say was whether it was to the left or right of it.

7 more replies
Answer Match 88.62%

Big Kudos to anybody who can solve this one! Very little/nothing on Google or microsoft support site.
Here's the problem:

I'm helping a family member who has a new Dell PC with Windows XP Home, Outlook Express 6.
Every time they close Outlook Express, the following Warning pops up:
To free up disk space OE can compact messages. This may take a few minutes. There are 2 options - OK and Cancel.

Here is the rub: We've closed the warning, or we've clicked OK, or we've clicked cancel, we've checked the box that says don't ask me again....these warnings continue to come up next time (EVERY time) Outlook Express is closed.

This is a senior citizen who has, maybe, 20 email messages and no shortage of memory or disk space. I want to prevent this warning from coming up ever again. How do I do it? Is there some default I can change somewhere?
 

A:Solved: "Free Up Disk Space" OE warning ?? Stop the Madness!

6 more replies
Answer Match 88.62%

My wife has a two month old Lenovo ideapad with Windows 7. We are now getting alerts that the D partition is near full. Is this system taking multipul backups of the harddrive C and storing them all? What are my best options to have a safe backup, but not overloading the D partition? I do see in; Computer>System>Device Manager>Disk Drives>D Drive General tab that there are two options at the bottom.
option one, (not checked in my case) "Compress this drive to save disk space".
Option two, (checked) "Allow files on this drive to have contents indexed in addition to file properties"
Would selecting option one solve my problem? If this system is saving a snapshot of D over and over, it will only be a matter of time when option one will be overcome.
SO, I would think that there has to be a setting that will let partition D delete older backups...right?

Would it be a combination of selecting option one and changing a setting that would enable older backups to be automaticaly removed?

A:Action Center "Check backup disk space" alert

Welcome to the forum
If your D drive is made for backup's only, you can delete all files exept the newest one.
But it's advised to make backup's on an external USB drive and change the frequency of backup's to your files and olso for images to your OS.

4 more replies
Answer Match 88.62%

Hello, my system disk is an Intel X25-M G2 80Gb (74.4Gb) and I recently discovered that there is a rather huge discrepancy in used disk space.

According to disk properties I have used up ~73.7 of the 74.4Gb, but the actual files on the disk are only 51.7Gb if I show all hidden/system files, mark everything and check size and WinDirStat report the EXACT same thing.

I have no pagefile on my system disk, no hibernation file and no system restores (it's actually disabled).

So any ideas whatsoever what this could be? It's starting to become rather annoying to "lose" 25% of my system disk. I've run diagnostics and haven't been able to find anything, I've googled it extensively and found others with similar problems, but the only solutions I've found are pagefile, hibernation file, system restores and of course disk cleaning - all of which I have checked already.

A:Approx. 20Gb of system disk space "missing" - Intel X25-M G2

Hello Zeilon, and welcome to Seven Forums.

The tutorial below may be able to help you ID what may be using the SSD's space. Option 1 with WinDirStat is a good starting point.

Hard Disk Space - Free Up and Recover

Hope this helps,
Shawn

3 more replies
Answer Match 88.62%

I use microsoft office 2007 My computer is dual core 2.53 Ghz 3 GB memory and I have 91.4 GB free disk space.
I am using Windows XP Professional Version 2002 Service Pack 2
I work a lot with word and did not have any problem. Now i have a problem with one particular file that I can not open and I always get the error "There is not enough memory or disk space to complete the operation. " When I try to open the file File size is not so big 652 KB Any ideas what I can do.

Thanks
Ofer
 

A:Solved: "There is not enough memory or disk space to complete the operation."

What type of file? Where did it come from?

If you do not have file endings showing, you should. Be sure that there is not a hidden "exe" or "com" at the end of that file.
 

3 more replies
Answer Match 88.62%

I am attempting to transfer all of the files form an NTSF 250 GB external drive to an empty FAT32 250 GB internal drive via USB.

I keep getting an error message that says "Cannot copy (filename): There is not enough free disk space. Delete one or more files to free disk space, and then try again. To free space on the drive by deleting old or unnecessary files, click Disk Cleanup".

This is not true though, as the destination drive has more than enough space for the transfer.
 

A:False error - "not enough disk space" durring transfer

You cannot transfer all the files because many will be in use...

You will ned to make a drive image with a program like Ghost, or you can even use its drive copy feature.

It will be cake to copy an entire drive.
 

3 more replies
Answer Match 88.62%

Hello. I am having trouble with a message in Action Center in Windows 8.1. It is saying "Check Backup Disk Space" and I cannot hide the message. I had Windows 7 File Recovery setup with Windows 8.1, but now after the upgrade, the message is "stuck." Can this be fixed? These two links explain it perfectly:

Windows 8.1 Update - Check backup disk space - Microsoft Community

Windows 8.1, can't remove "Check backup disk space" error in action center - Ars Technica OpenForum

Please help. Thanks.

A:"Check Backup Disk Space" Error Windows 8.1

See picture:

2 more replies
Answer Match 88.62%

i heard this is way to much. what should i set it to?> or what else should i do?

thanks alot,

dustin

A:in my internet options, my "amount of disk space to use" is 8591 MB..?

It's down to preference really but you don't really need it to be set more than 200 mb's.

Hope that helps :)

1 more replies
Answer Match 88.62%

when i try to run word 2007 i get the following error message:
There is not enough memory or disk space to run word 12

I have 1Gb RAM with 550Mb free and 2Ghz Turion with 7Gb free space on the system partition and 15Gb free space in the other partition

can any tell me why its doing this?

thanks
 

A:OFFICE 2007 - "Not enough Memory or Disk Space to run word 12"..?

7 more replies
Answer Match 88.62%

I know this question has been asked before as I've read about it all over the Internet. In order to get rid of the 'Low Disk Space' message it says to go to the registry and locate HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer, type a new value, etc. The only problem is I don't have an Explorer key. It ends at Policies.

I've tried everything. I've tried creating the key myself, and I've tried inserting the value into the policies folder. Nothing has worked. Can anyone help?
Thank you
Brad
 

A:Solved: Can't get rid of "Low Disk Space" message on my recovery drive

I guess no one else is having this problem. Do you think this is a problem with HP?
Brad
 

3 more replies
Answer Match 88.62%

Hello everyone,

I am currently a new registered user and was wondering if this was the correct place to post my problem. I have a issue with my Local Disk (C:/ Drive) and was wondering what was taking up so much space. I have a 1TB hardrive, currently on my Local Disk I have 136GB free of 454 GB. However, when I add up what I can find when opening the drive, it doesn't add up anywhere near the 317GB that it says has been used.

Now, I have currently installed...CCleaner, Eusing Regcleaner, AVG Free 8.0, and TreeSize, all of which I have run various times (still learning about TreeSize).

BEFORE I was getting scared because I had even less memory free (approx. 74.9GB of 454GB). But after running a Disk Cleanup...it knocked it down to it's current state. It still doesn't explain how I have so much memory used.

My only thought now is that there are extra copies of my folders and files. Or most likely this has something to do with Vista's "System Restore". I am not very adept at using this PC. Whatever advice you guys can give...try to dumb it down for me and tell me where to go (e.g. Control Panel>Systems>etc..)

And my System Specs are incomplete because I don't even know where to go to get all that information! So if you need to know something about my PC tell me where I might find it or just look at what I have for my System Spec.

Thank you very much, I'll be checking my post at least once a day so I'll try to respond quick if any of you pros have an idea... Read more

A:Local Disk/System Restore/"eating" up space

Hello Mike, and welcome to Vista Forums.

This tutorial will help you see how much disk space is being used by System Restore and how to adjust the MAX size it can use. With a 1TB drive, it will have a high MAX by default.

System Restore - disk space

Hope this helps,
Shawn

3 more replies
Answer Match 88.62%

I know it reduces the overall file size of the folder or file in question, but what method does it use to do this?

If you are not familiar with this phrase, it appear if you right-click on a file/folder in windows explorer and select "advanced". When selected the file/folder name will turn blue.

I need to know for some work, I have to compress some work and I could merely show myself using this feature, but explaining how it works would be better.

Thank you

A:[SOLVED] What does "Compress Contents To Save Disk Space" do?

This compression method does not reduce the "size" of a folder, it reduced the "size on disk". am I right in thinking that this compression method does not alter the code of any files, it merely stores the folder in a way which saves space on the disk?

6 more replies
Answer Match 88.62%

When I couldn't delete the student office trial (which came installed with my HP laptop purchase) from "add/remove" due to having deleted first, a different but associated program (can't recall the name), I followed these tedious instructions found on this link - http://support.microsoft.com/kb/928218

The problem is...I noticed that instead of freeing up disk space, it took up more. How can I remove this trial completely to free up space?
 

A:Office Trial Removed From "Add/Remove" YET Ate Up Disk Space

ellaphant5 said:


due to having deleted first, a different but associated program (can't recall the nameClick to expand...

This can be a problem.

Also, I would say that fix from MS applies only to when the proper procedure for the uninstall of Office is followed but the end result is not what we expected so basically that didn't wasn't any help.

We need to know what other mystery "associated" program is.
 

1 more replies
Answer Match 88.62%

Using XP SP-1, 40GB HDD
A folder named "System Volume Information" has been created in each drive (C:,D:,E:,F: )
and consuming significant disk space day by day. Whether deleting these folders will create any problem. Any other technique to stop increasing the size of these folders ? Please suggest.
Presently consuming more than 3 GB in total.
Sometimes I need system restore to speed up the PC (besides other registry tools ) ..therefore this function is enabled in the system.
 

A:Too much disk space consumed for "System Volume Information"

9 more replies
Answer Match 88.62%

Hi there,

I am facing a problem with the backup program of Windows 8. My computer (Asus with 250SSD) disk is new and I just installed my programs. Now I want to create a System Image using Windows. The image should be around 50go. Everything works fine until I get a message error saying my external disk does not have enough space, which is impossible since it is completely empty (500go).
Did anyone have ever meet that problem and/or have advices to help me? I would like to solve that and not be forced to used another way to backup.

Thank you,

Vari

A:Create system image failed - "not enough space on disk"

Is your second disc formatted NTFS?

7 more replies
Answer Match 88.62%

Hi - I keep getting the message that a backup failed due to less than 400 MB on the Windows disk. I have about 350 GB available on the disk!

Other backups have worked OK. I have seen a long thread on the Microsoft site with lots of people saying they have the same intermittent problem, but no solution. Anyone know what causes this?

I'm working Home Premium, and backup up to another hard disk on the same machine which also has lots of free space.

Thanks guys

Frances
 

A:Vista backup fails "not enough space on Windows disk"

Just a couple of simple questions, which you may have already covered.
How much space is on the C drive.(where Vista is installed)
On the 'Where do you want to save your backup' page, you are sure it is your second drive and not the 'Recovery' partition.
moper
 

2 more replies
Answer Match 88.62%

Hi there!
First of all thanks for the great toturial and the forum.

I tried to do the in-place upgrade from Windows 10 (build 1607) in order to "repair" my system (there are some quirks I want to get rid off) using a freshly created USB (as per description), but it fails with the message "make sure that there is enough disk space available in your PC" (rough translation from german; see attached screenshot) without any further information.

It then automatically cycles back to the question on how to install (i.e. with keeping data and apps or without) and then back into the above mentioned error message.


This is what I already tried or made sure of prerequisites needed:
I have made sure that there is definitely enough disk space available.My C: partition (where windows resides on) is 106 GB large and has currently over 58 GB of free space available.The system partition that is supposed to be 350 MB is still 350 MB (I read something about this potentially being reduced to 100 MB by other tools ...).I have deinstalled the Kaspersky anti virus tool (reinstalled it now after several tries with no success).I have disabled (i.e. fully decrypted) the disk encryption bitlocker on all disks.

My partitions (as seen from "Mini Tool Partition Wizard" and "Disk Manager"):
Do you have any ideas on what else could be wrong?
What intrigues me most is the fact that there is no further information in the error message on what or where is missing... Read more

A:In-Place Upgrade fails with message "not enough disk space"

Hi, Mark and welcome to Ten Forums.
Have you tried to mount the ISO in File Explore, instead if using an USB stick?
I just download the current ISO here: Windows 10 ISO , mount it in File Explorer and run the setup.exe.

22 more replies
Answer Match 88.62%

I got the warning msg that my drive "E" (system restore) was almost full. I did a disk cleanup, and a delete all restore points (including system...). After deleting approx 25 restore points and I've deleted down to 2 currently (new ones) and the only way I could get them to go was with CCleaner, My disk now shows only 4.2 free of the setting of 10.6GB. I cannot find what it taking up over 6GB on my recovery disk. What has it gone for....? I searched the internet several hours but can't find the answer. Any help appreciated...TJ

A:Unable to increase free space on Recovery Disk "E"

System Restore points take up space on C, rather than in E or a recovery partition in my experience. A recovery partition is normally put there by the manufacturer to allow you to restore to factory specifications if needed. I wouldn't ever deliberately put anything else on a recovery partition.

Who made this PC?

Can you post a picture of Windows Disk Management so we can see a visual display of your partitions?

3 more replies
Answer Match 88.62%

I first notice my notebook begins to have this issue when I tried to update my Windows. It returned me with error code "80070008", which says that my computer might have run out of memory, however, there are 200GB space available
in my C: drive, and I am only using 27~30% of my RAM out of 8GB.
I tried to perform DISM 'ScanHealth' and it returned me "Error: 8 - Not enough storage is available to process this command".
At first, I tried to ignore this issue as I thought it did not cause me any major trouble. But I was wrong. Several USB devices become unresponsive (yellow exclamation icon at Device Manager).
When I tried to manually install drivers, that's when I found out it was this STORAGE insufficiency again that cause me trouble:

"Windows found driver software for your device but encountered error while attempting to install it.  - Not enough storage is available to process this command".
Some of my programs also become incredibly laggy ever since this issue arises, yet I don't know where the problem lies. 
At Event Viewer... I noticed several error messages regarding
"Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights. - DETAIL: Not enough storage is available to process this command".
I also caught a glimpse of one error that I think stated more clearly:
"Application popup: Windows - Low On Registry Space: The system has reac... Read more

More replies
Answer Match 88.62%

Is it possible this can do any harm to my computer?

 

A:Quick question about the option "compress drive to save disk space"

I have never knwon it to, it doesn't delete any of your wanted files, only temporary junk!
David
 

3 more replies
Answer Match 88.2%

I receive daily a "Low Disk Space" error message which is incorrect and in my estimation fradulent. It goes on to give an alternative to rectify this situation by offering to "Speed up your computer and remove all viruses that are on your computer." Of course all of this is for a price. If you opt in and then change your mind before you totally commit they offer the same package for half price. I refuse to be "sucked in" by this fraudulent company.

I have gone to the internet to try and find out how I may get rid of this enemy. I have used Malwarebytes, Microsoft Security Essentials and Microsofts Security fix program all to no avail. I am at my 'wits end' trying to rid my computer of this plague. This is the url that the message comes through as. I cannot find out any source that will identify its origin: http://static.salesresourcepartners.com/g/?z=1&ilmernzkvtaztu=002618B38EDC0810&pu=cGlja3VwaG9ja2V5LmNvbQ==&s=iexplore&nm=ilmernzkvtaztu&t=aHR0cDovL3d3dy5waWNrdXBob2NrZXkuY29tL2ZvcnVtL3RvcGljLmFzcD9UT1BJQ19JRD0yODIzNw==&r=1

I need help.

Thanks,

Doug. Bell
 

A:Fake "Low Disk Space" error message

16 more replies
Answer Match 88.2%

There's not enough disk space on drive C where Nero 7.57 is installed; but, there is on drive E. I set Nero's cache folder to E:\NeroTemp and and Windows temp and tmp environment variable to E:\Temp where there is over 100 Gigs of free space and restarted the computer; but, there is no change with Nero's insufficien-disk-space error.

And, yes, I did create those folders for drive E.

What to do?
 

A:Nero aborts with "not enough disk space" error.

9 more replies
Answer Match 88.2%

I had the same trouble. I had never backed up my hard drive before i had kind of run into it so i figure what the hay i'll try it. It told me to back it up on the D drive or disk. (since i didn't have a disk setting there i figured i would back it up on D drive) Well after a few min. it said i didn't have enough space. So i figured Oh well. I didn't need to back it up. Well EVERY TIME I Reboot the computer now it tells me I'm low on disk space on drive D.
Now everyone know D drive doesn't have alot of space it has your system on it. But why now is it checking it all the time. When it tells me to clean it , it shows me where and there isn't anything to clean. THIS IS ANNOYING! HOW DO I MAKE IT STOP?

There is no screen to give a shot of. It's a little icon on the task bar that pops up. Than when you click on it it says delete unused files. When you click on it it gives you the list of files you can delete. BUT there is only two things on it and both are all ready empty. One is recycle bin.

A:[SOLVED] How to stop "low disk space" messages

Hi Rachel3790 and welcome to TSF !

It's better to start your own thread so that we keep one thread for one user. Here's a link to the related thread you first posted into :
http://www.techsupportforum.com/f10/...ve-182725.html

Which program did you use to backup your system drive ?

If this is an HP computer have a look at the link advised by Mon in the other thread :
http://h10025.www1.hp.com/ewfrf/wc/g...reg_R1002_USEN

Else, when disk space is running low, Windows may advise you to run the disk cleanup utility which allows you to delete temporary files and empty the recycle bin, among other things. Since this doesn't help it means that your hard drive is simply filled with your own data and the data from the programs you installed on it. The backup you just created is probably also taking some space and if you don't need it you should just delete it.

What you need to do is copy some files on CD's or DVD's, on an external drive or to another computer. You should uninstall the programs you're not using anymore using add/remove programs and you can also delete some old documents of yours in your "my document" folder if you don't need them anymore.

Be careful not to delete any system file or folder. Files that are safe to move away are video and music files. These media files usually take plenty of space and you can free that space if you burn them on CD's or DVD's and delete them from your hard drive.

If you have no idea what's using up space o... Read more

4 more replies
Answer Match 88.2%

Windows Update trying to install KB2976627, continually receiving error that I do not have enough disk space remaining to install the update. My OS Drive has 75 GB Remaining. Does anybody have any idea what causes this problem and how to remedy it?

A:Windows Update error, "not enough disk space..."

Time to do a Cleanup of your system:
Windows Update Cleanup in Windows 8

4 more replies
Answer Match 88.2%

Doing some maintainence on my computer, i am considering doing this option: "Compress drive to save disk space". There is also a "compress old files" to save space

are these both the same things? (same drive)
can i undo this options? im a big fan of reformatting to undo problems in the event its challenging to undo compress a file.

thanks
 

A:"Compress drive to save disk space"

6 more replies
Answer Match 87.36%

I am trying to copy a 9gig video file to my Seagate external USB 2 drive for back-up.
The drive has 140gig available, but I keep getting the "not enough free disk space" warning when I try to move it and it will not allow it to be copied.
What am I missing? is it a format thing?
 

A:Solved: "not enough free disk space"

6 more replies
Answer Match 87.36%

I have to harddrives, drive :C/ and drive D :/ drive c has the basic miniums and came with 16 gbs of space which is completely full with windows , then drive d has 136gbs and is 103gb of free space left
ANYTHING i try to download i try to make it go to Drive D but none the less i keep getting the error "not enough disk space"

this is a brand new system, that a friend whos good with computers built for me for my gaming needs, i have a

intel r core tom 2 quad cpu 6600 @ 2.40GHz 4 gb ram 64 bit operating system..

if you can help or need any info please let me know where i can find the info for you on the computer im pretty crappy with computers so i need all the help ican get

A:keep getting "not enough disk space" with 2 hard drives

anyone have any ideas? this is getting really frustrating....

2 more replies
Answer Match 87.36%

"Not enough memory to run microsoft excel. Please close other programs and try again"
So this morning I tried to open up excel, and this message comes up. Same happens for word.
Then I try and open it again and it wants to run in safe mode, and then the same problem happens.
Then I open it again and it says "Excel failed to launch in safe mode. Do you want to start Detect and Repair?"
So I run that and it says setup completed successfully. But I try and open it and I get the original "not enough memory" message, and it's just a big loop.

I have enough memory, 3GB and I'm using office 2007 on windows 7.
It's been running fine since this morning.
 

A:"There is not enough memory or disk space to run excel"

How about diskspace that's ' memory' too.
The environment settings voor %TEMP% could be invalid?
 

3 more replies
Answer Match 87.36%

Hello people, I have an external 500 gigs drive with over 100 gigs free and a partition on a RAID 0 with 500 gigs free. I was trying to copy a folder with 25 gigs of data from my external hard drive to my 500 gigs partition, until at about copying 2.5 gigs, Windows shows up a warning saying that there is not enough disk space and that the file (was 500 Kb...) could not be copied. I skipped it and kept doing the same thing for every subsequent file... whats my computer's problem? I have WIndows Vista Home.
Thanks!
 

A:Solved: "There is not enough disk space" warning

16 more replies
Answer Match 87.36%

I am getting this window popping up every 2 or 3 minutes despite clicking on it and ticking the usual boxes to remove the unwanted files - 3 minutes later back pops the warning

its as if the pc doesnt know I'm actually doing it

I have followed this advice given to someone else on another site

"Insure the temp files in the hidden Local Settings folder are deleted.
Start>My Computer> Local Disk C> Computer user name> Then go to tools (at the top)> Folder Options>View and put a dot in show Hidden Files and Folders Click OK> Open the Local Setting Folder>Temp> Delete all the files you can in the temp folder.
3. Run Disk Clean from the Start>All Programs> Accessories> System Tools>Disk Clean Insure you remove all the compress old files.
4. Get Rid of the Restore points and Lesson the amount of disk space System Restore uses.
Right click on My Computer>Properties>System Restore and put a check in turn off system restore now click on the Settings Button Choose a setting of 1 - 5% click apply and OK
Go back and TURN ON system restore, insure the amount of disk space for system restore did not default to the Max amount."
but it hasn't made any difference whatsoever

could this be a virus? I ran malaware and then 'search and destroy' but that made no difference either

I have an Acer Aspire T1 2OE
 

A:incessant "low disk space" warnings

16 more replies
Answer Match 87.36%

In Explorer on Computer, is there a way to change the number of gigabytes or percentage that Windows uses before it changes from the blue bar to red? For instance, I have an array that is 1TB, but it still has over 15GB free on it, but Windows interprets that percentage as the drive being low, so the bar appears red.

To me, I don't want that bar red unless there is say, 5GB remaining, or maybe even 1GB. 15GB still goes a long way, even though it is a small fraction of 1TB.

Ideas?

A:Changing the Disk Space Bar "Low Level"

  
Quote: Originally Posted by muzicman82


In Explorer on Computer, is there a way to change the number of gigabytes or percentage that Windows uses before it changes from the blue bar to red? For instance, I have an array that is 1TB, but it still has over 15GB free on it, but Windows interprets that percentage as the drive being low, so the bar appears red.

To me, I don't want that bar red unless there is say, 5GB remaining, or maybe even 1GB. 15GB still goes a long way, even though it is a small fraction of 1TB.

Ideas?


15Gb out of 1Tb would be considered low to me.

2 more replies
Answer Match 87.36%

Hi

I have recurring problem, which I have noticed on PCs other than my own. The used space on my hard disk drive is approximately 5GB higher than the total of all the files on it. (It's always been around 5GB, every time I've seen it). The only thing I can do is to reformat the disk, and it will be fine for a few months, and then the same amount will "disappear" again. Disk cleanup, ccleaner, etc don't help, and it's not the recycle bin or temporary files.

It happens on my primary (Windows XP) partition, but not on the secondary partition, and last week it happened on my external hard disk after I deleted a large quantity of data.

I only have 60GB in total (30GB on the primary partition) in my laptop, and 40GB on the eternal drive, so its pretty annoying to lose 10GB. If it makes any difference, my external drive is a 2.5" laptop drive, a Hitachi Travelstar, NTFS formatted. Not sure what brand is in the laptop, but it's FAT32. But I've seen this happen on a friend's desktop too (again only on the primary partition).

Any ideas why this happens and if I can do anything about it that doesn't involve reformatting?

drawde
 

A:"Lost" hard disk space

Tell me if I'm teaching you to suck eggs, but what size blocks do you have on your drives, because without decent sub-block allocation, you'll often lose parts of blocks for files when they're smaller than the block size. Even with sub-block allocation, you'll still lose a bit because of the overheads, but 5GB seems a little steep for that size of disk.

If I compare my size of files, with size on disk, I'm losing ~1-2% of the disk. That's with the default block size of 4K. But it probably depends on the number of small file you have around the place.

After deleting a large number of files, it's probably worth-while running a disk cleaner to make all the blocks contiguous again, and that should give you back most of your space, but if they are really not getting re-allocated as free space, then I'll have to dig more.

Rich.
 

1 more replies
Answer Match 87.36%

I frequently get a notice that the disk space on my D drive is low and asking me if I want to clear up some space by using the cleaning utility that came with Windows XP Home Edition. This disk is my secondary drive and I know the space is low. Is there a way that I can get rid of this annoying notice that appears on my screen every so often? Thanks.
 

A:Solved: Notice of "Low Disk Space"

Hi referee07,

The "clean up unnecessary files" is safe to use. You can also add
choices in the list of what's to be deleted. You can also safely
remove all temporary files... Search for "*.tmp" (without quotes)
and delete those.

Also the trash bin standard setting is 10% of your drive. I would
adjust that downward to 2 % on all drives.

And, of course, you can delete some things that you really don't
need, or put them on a CD if you have a burner. Hope that helps.
 

2 more replies
Answer Match 87.36%

I'm getting the Low Disk Space message in Windows XP. Well, DUH...I knew that I was running out of room, so I bought an external hard drive with more space than I'll ever fill. Like an idiot...when I got the external.....I just went to folders...sometimes programs and used "send to" the now G: drive. Yes, I know, that was STUPID! Many of the same files are duplicated, etc so that they were copied and sent....not actually MOVED. Some of my programs don't even work correctly anymore.

I know that I can do a system restore....but I'm almost afraid that it might crash my pc. What is the easiest way to fix this problem and put everything else, except my bare essentials, on the bigger drive?

Thanks!
 

A:The dreaded "Low Disk Space" message

bumping this hoping to get some help
 

3 more replies
Answer Match 87.36%

Forgive me, but I?m new to the forum and relatively new to [rebuilding] computers (compared to some of you, I?m sure?) I do have a tech background.

Having said that, I had to do a re-install of XP (SP1) on a Dell Optiplex GX620 that I have. While at it, I upgraded the HD to 1.5TB (Seagate Barracuda)

The XP install went well. I did not have a restore disk for the drivers, so I went to Dell?s driver download website and downloaded the correct drivers for my model/service tag.

I put the drivers on a USB flash drive and moved them/loaded them onto the Dell. I installed the drivers in order and most installed fine. A few however, such as the Broadcom 57XX Gigabit Divers, are telling me that I am out of disk space. I get the error and a dialog box says that the volume on the C: drive is -650GB, and I have -655GB Available, with 2328KB Required and Differences of -650GB? I have no-idea what?s going on here, but I can?t seem to install the driver(s).

I did Disk Clean-up, defrag, chk disk, Ccleaner? blah, blah, blah? I am only using 1% of the available drive capacity.

Any ideas?

A:New O/S and driver install "Out of Disk Space"???

BUMP... Does anyone know whats going on with this? It's a simple re-install and driver install problem; not a virus or anything weird.

Someone has on this forum has HAD to have seen this before.

Please help.

Thanks.

5 more replies
Answer Match 86.52%

Hey guys, I need one of you hardware geeks to help me here. I finally bought the Maxtor DiamondMax10 hard drive. Its SATA 300 Gig with a 16 Meg Cache and NCQ. I already have a SATA WD Raptor as my main drive and trying to install this one has a data drive. I have an Asus PW5D2 Premium Board.

When I boot up, it takes a long time (about a minute) to do anything than I eventually get a "Hard disc error" and I have to hit F1 to continue. The BIOS recognizes the drive, but Windows does not. I've swapped out the cable and tried a different controller, same result. While I have like 10 hard drives laying around, they are all PATA--no SATAs to try.

I think the drive is damaged. I downloaded Maxtor's PowerMax, but its worthless--goes through some tests and the inital ones pass and later ones fail, but its the same thing on the other drive (the Raptor) and that one works fine. Tells me eventually to contact Maxtor Tech Support on both drives!

Any ideas?
 

A:Getting "Hard Disk Error" on second SATA data drive

10 more replies
Answer Match 86.1%

My computer started giving me this message out of no where. "Verifying DMI Pool Data ... Disk Boot Failure, Insert System Disk and Press Enter". It is or was running on Windows XP. It was fine one day and the next it just gave me this message. Restarting it did nothing. When I press enter it just tells me "Disk boot Failure, Insert Disk and Press Enter". Aside from that it doesn't let me do anything. I can't run it in safe mode or do anything at all. I'm not sure if it might be a virus or if something else is affecting it. Any help is greatly appreciated.
 

A:"Verifying DMI pool data...disk failure"

Normally this error means that the ROMBIOS in your computer either encountered an error trying to read the first sector from your hard drive or did not find a valid boot signature on the first sector of the hard drive. The could be the result of any number of things such as the hard drive power or data cable coming loose, the ROMBIOS settings being incorrect and not recognizing your hard drive or the hard drive itself going bad.

I would first make sure that you hear the hard drive spin up when you start the computer and see the drive access light blink a few times and then try going into the ROMBIOS setup and checking to see if your hard drive is being recognized and then take a look at the hard drive cables to make sure that are securely connected. Although not quite as likely it could also be caused by a boot sector virus.

If all else fails I would try removing the drive from the machine and using a $10 USB 2 ATA/IDE cable to connect the drive to another computer to see if it can be accessed and then run a virus scan on the drive.

Good Luck,
John Hensley
www.resqware.com
 

2 more replies
Answer Match 85.68%

I keep getting "Low disk space" messages about one of my partitions.

First of all, what is the point of this message? I can see why it would be useful for the system drive, but for all other drives why would anyone worry about filling up a drive?

More importantly, how can I disable this message from persistently popping up every day?

A:What are "Low disk space" messages for?

Hello Marty,

It's basically just a warning to let you know that the disk/partition is extremely low on free space. This is to warn you to either clear space or get a bigger storage device soon since you could lose data, possibly everything, on the hard drive if you run out of space on it.

The tutorial below can help show you how to disable the "Low disk space" message. Low Disk Space Warning in Vista
Hope this helps,
Shawn

9 more replies
Answer Match 85.68%

Hi everyone,

I've been having this prblem for several months but recently it has been getting worse. I'm working on an Dell Optiplex gx280 windows xp professional sp2. Here is the problem, while I'm working on my computer (doesn't matter what I'm doing) I will get an error msg "low disk space" flash on my screen, then my monitor will shut off, but the power light on the computer stays on (sometimes flashing). I'd have to power it off and turn it back on and it would log in normally. This morning it happened 3 times, please help. Thank you in advance.

-jdaries-
 

A:"low disk space" error

6 more replies
Answer Match 85.68%

I have a Compaq Presario with Windows XP Home Edition. I keep receiving the above message. How do I get rid of it? Yes, I know it means I don't have enough disk space on my D Drive, but how do I fix it? It won't defragment because it needs more space (I have only 45 mgs.) My D Drive is solely for Restore so I cannot delete files from there. Can I enlarge the D Drive?

Thanks, gb
 

A:"Low Disk Space D Drive"

16 more replies
Answer Match 85.68%

One of my users was working in Corel Word Perfect 9.0 and experience an "out of disk space" error when she tried to save her work (just a small document). She was working over our TCP/IP network using Win2000 terminal server and saving to a Linux file server. I was at the server so I was able to save the file with a different name but I can't figure why she would get that error as there is plenty of space on the Linux server. Has anyone ever seen this before? Thanks
 

A:"out of disk space" error

Just a wild guess but is there possibly a setting somewhere that may limit the amount of storage space a user can use, on a user by user basis? If so, you may just need to increase the setting for that user.
 

2 more replies
Answer Match 85.68%

Dear Experts,

I have created windows image on Drive F: but delete it after some time manually due to some space prob.
But while backup shows about 40 GB only few GB space got free after deletion. When i try to again take the the backup using windows 7 backup & restore option, its still shows 35 Gb of System Image in drive F: when i brows the Manage Disc Space option but i cant find it on the same drive. (Plz see attached pic)
Plz help me to locate this and delete the same.

Thanks

A:Cant find "System Image" of 36 GB but its shows on "Manage Disc Space"

Hello sattyaji, and welcome to Seven Forums.

It may still be showing if the system image was created as part of a Windows backup. Using the tutorial below to reset Windows Backup should clear it for you, but you will need to set up your backup again afterwards.

Backup User and System Files - Reset to Default Configuration

Hope this helps,
Shawn

5 more replies
Answer Match 85.68%

Hi Everyone,

i am using CRichEditCtrl::GetLine() function to read the text from a dialog.
If my text contains any space character then it is throwing improper argument error and the application getting closed in vista only.....
What is the actual problem ????? why it is happening with vista only...?

Please suggest

More replies
Answer Match 84.84%

Please can somebody help with this minor but annoying matter. When turning on my business computer one morning, the space bar and return/enter buttons are visable when i type emails, but when i send them, they are not. I know its a setting, but can anyone tell me what setting and how to turn it off?

Thanks!

A:[SOLVED] "Space bar" and "return/enter" are visual on emails! Help

You need to tell us what email client you use as these days not everyone uses the built-in one.

4 more replies
Answer Match 84.42%

Hi Guys, any ideas how to access my external hard drive [TOSHIBA MK3029GACE] device manager can see it but it does not appear in disc management.

I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management.

Please check the attached screen shot..

Thanks for the help....

A:HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management

Specs show that drive has a ATA-6 interface (P-ATA, or IDE). How are you connecting this drive to your laptop? Does the laptop have a PATA or SATA connection? Does it use an adapter?

1 more replies
Answer Match 84.42%

I have a chart in an Excel spreadsheet, and it has several "series" in it. Some of the series are charted as "lines", and some are "areas" that fill in the entire background of anything from 0 to the value I have entered.

I have one particular series that is showing up as an "area" but I want it to be drawn as a "line" instead, so it DOESN'T fill in the area below it. I currently have the "background" as "none", but now I have a line from the last value down to "0", and that's what I want to avoid...

Thanks in advance!
 

A:Solved: Excel 2003 - how to change a chart data series from "area" to "line"??

8 more replies
Answer Match 84%

Hello

how can I delete "saved password" and "form data" of microsoft
edge manually ?!

after too much search in google ....

I trid to delete some value of the following registry address
HKEY_CURRENT_USER\SOFTWARE\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppContainer\Storage\microsoft.microsoftedge_8wek yb3d8bbwe\MicrosoftEdge\

also I tried to delete some files in the following folder
%LocalAppData%\Packages\Microsoft.MicrosoftEdge_8wekyb3d8bbwe\

and finally I could not find the way ...!!!

please help !

A:delete "saved password" and "form data" from microsoft edge manually

Hi,
Welcome to the forums, go to settings (... dots from top right), click view Advanced settings and "Manage Saved Passwords".
HTH.

0 more replies
Answer Match 84%

Ive been getting random popups and my homepage has been reset to http://www.securitynetpage.com/. I also had two programs installed onto my desktop, Online Security Guide" and "Security Troubleshooting". I also have a yellow triangle sign in the lower right hand portion of my screen that says something about a system alert: popups. Help would be greatly appreciated. Thank You.

Logfile of HijackThis v1.99.1
Scan saved at 4:15:12 AM, on 8/17/2006
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\ishost.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Java\jre1.5.0_03\bin\jusched.exe
C:\Program Files\Messenger\msmsgs.exe
C:\WINDOWS\System32\regscan.exe
C:\Program Files\Kodak\Kodak EasyShare Software\bin\EasyShare.exe
C:\Program Files\Kodak\KODAK Software Updater\7288971\Program\Kodak Software Updater.exe
C:\WINDOWS\System32\ismon.exe
C:\Program Files\Java\jre1.5.0_03\bin\jucheck.exe
C:\WINDOWS\system32\drivers\KodakCCS.exe
C:\WINDOWS\system32\pctspk.exe
C:\WINDOWS\System32\issearch.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\WINDOWS\System32\isnotify.exe
C:\Program... Read more

A:Random popups, "Online Security Guide" and "Security Troubleshooting"

Hi and welcome to TSF.

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem a.s.a.p

In the meantime, make sure you subscribe to this thread so that you will receive an instant email when I have replied with a fix to your problem. You may do this by clicking the Thread Tools option at the top of your post and then clicking Subscribe to this thread. Then, make sure Instant Notification by email is selected and click Add Subscription

Please be patient with me during this time.

2 more replies
Answer Match 83.58%

Argh!!!

Windows imaging has suddenly decided that my main data partition is "system" and insists on including it in an image. Any ideas (apart from don't use windows imaging). There are no system files on it. I do one image a month with Windows imaging after applying patch Tuesday's updates. last month it was ok, today not.
Never mind. I think I know why. I moved a SQLServer database onto that disk last month.

A:Data disk is "system"

windows imaging!! what is that, can you describe it?

2 more replies
Answer Match 83.58%

I only get the BSOD when playing games, not any specific game, but any, sometime i can go a whole week of playing games and have no BSOD at all, and somedays 5 minutes after a game is running it will BSOD everytime, all day long. When I try to Run any game like GW2 Or Inquisition my pc turns into Bluescreen with an error CRITICAL_PROCESS_DIED or KERNEL_DATA_INPAGE_ERROR ..I've already Updated all my drivers and reinstalled all my games, also run chkdsk /f and memtest with no problems.


This is the screen:

Also this is my dump config:
(note that i have windows 8.1, not 7)

Still it doesn't create any File or Folder and when the BSOD happens the blue screen say that its collecting info but it doesn't get off 0% .
It's the same with the critical process died it just goes to the blue screen saying its collecting info but it also doesn't get off 0%.

I'm completely baffled with what to do as the blue screen view hasn't picked up anything and i cant find the dump files.
 

A:"Critical Process Died" & "Kernel Data Inpage Error"

Hi BTW, welcome to the TSG Forums....

You may find this from the MS Community helpful. If Greek is easier to understand than this article then come back to this Forum and someone will help you.

http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/windows-81-bsod-kernel-data-inpage-error-and/b67ae41a-9228-4462-9c53-d1f5d115f784

T.
 

1 more replies
Answer Match 82.74%

I downloaded the game in Winrar format on the desktop and when I tried to extract it to specific folder,I have this error message:-

There is not enough space on disk
Write error: only NTFS file system supports files larger than 4 GB

On my local C: drive I have more than 15 GB available.What do i do now?
Help is very much appreciated.
 

A:"not enough space on disk"???

Your hard disk is FAT32 format? The problem is that the file is larger then 4 gigs, so a FAT32 HD can't handle it, what u need to do is reformat ur computer so its NTSF. Except that means you will lose everything on your drive I think
 

3 more replies
Answer Match 82.74%

I have a virus that eats up all of my available disk space. I have deleted most of my programs, and after the deletions are done, the space I made available fills right back up again. I ran (online) Norton/Symantec, trend micro house call, and AVG. I had to do it online since I need more disk space to run a resident virus program. The only way I can stop the monster from filling up any space made avalable is to delete a program and come up in safe mode. As soon as I reboot to full windows , the space I made availabe fills up. It seems to leave at least 170 to 200 Meg available. The PC is a Dell laptop with a 10 gig drive. And at this point, few programs!

More replies
Answer Match 82.74%

Can anyone suggest a remedy, please?
I recently ran a full PC recovery from my back up DVD-ROM disks. This was about the fifth time I've had to do it, due to infections, etc.
I have 3 recovery disks, but it only ran disc 1, and never asked me to put in the other two...
When I rebooted, I soon realized that I only had 1 or 2 GB of free space.
The C: drive is around 80GB in size and obviously should not be this full.
I suspect it may have to do with the partitioning, or something I did in my previous 4 system restores...
By the way, the last time my HP crashed (about 2 months ago), I got fed up with Windows and tried to install Linux, but I was never able to figure out the code or process necessary for Linux to run my wireless driver, and couldn't connect to the internet, so I reluctantly just re-installed Windows from the disc.
Can anyone help, please?

A:help with "Low Disk space"

Why not scan your hard disk with a disk space utility like showsize(showsize.com)? See what you come up with. You will be able to see the largest folders on the folder sizes report and the largest file on the Only files report (if you sort on Size column).

4 more replies
Answer Match 82.74%

I just got a new Hewlett Packard computer with Windows XP. The CD drive is a combo CD reader, writer and DVD. The main reason I need it is to backup my many documents, database programs (RootsMagic family history, Quicken, etc.), photographs and drawings. The pre-installed burning program on the computer is Adaptec's (I think) Sonic RecordNow!, which is useless for my needs because of the way it works. The HP tech suggested I download DLA to enable me to use "drag & drop" through Windows Explorer, but I haven't had much luck with that, either. What I need is to be able to use a CD-RW as a giant floppy - to add, delete, copy, edit and move files, just as I do on my regular floppies, using "drag & drop" through Windows Explorer, or "save as...". What software do I need for this? Please use "baby-talk" with me, because I don't understand any of the initials, terms and technical language I see all over these forums. Thanks, Dellasha
 

A:Data backup and storage to CD-RW's using "Drag & Drop" or "Save as..."

The most versatile program for that is "Nero"
The latest version Nero6 Reloaded is a bit bloated, maybe the NeroMIX will do better for you. Read the specs here: www.nero.com

The part that interests you specifically is InCD.
 

5 more replies
Answer Match 82.74%

hi. i'm new here. nice to meet all of you!
just like a lot of folks i'm sure, i've come here because there are some weird things running on my pc that shouldnt be in there.
please help!!!!!!

heres the hijack log
(thanks in advance. i don't know much about this computer virus stuff.)
~eric

Logfile of HijackThis v1.99.1
Scan saved at 10:06:40 AM, on 9/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Dantz\Retrospect\retrorun.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\ZoneLabs\vsmon.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\SYSTEM32\qttask.exe
C:\Program Files\Java\jre1.5.0_01\bin\jusched.exe
C:\PROGRA~1\VERIZO~1\HELPSU~1\VERIZO~1.EXE
C:\PROGRA~1\VERIZO~1\HELPSU~1\SMARTB~1\MotiveSB.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\PROGRA~1\Sony\SONICS~1\SsAAD.exe
C:\Program Files\Common Files\Verizon Online\ConnMgr\cmisrv.exe
C:\Program Files\Windows Media Components\Encoder\Wmencagt.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\ZoneLabs\isafe.exe
C:\Program Files\Common Files\Verizon Online\AppMgr\vz... Read more

A:"windows no disk" and "winsilly" "win956temp"

11 more replies
Answer Match 82.32%

Hey everyone, here is my serious problem.

Unfortunately, I was stupid enough to let my "Free Space" on my entire computer get to less than 5 GB left. It may possibly have been at 4 or 3 GB, actually.

My computer then froze, and I went to restart it. However, it would just take me to the blue screen of death. I've tried booting it up in every way I could think of, in normal mode, in Safe Mode, with the "Repair Windows" option, and everything else. My computer will simply not get past the "Loading" screen.

On the blue screen of death, it does say "Check to see if you have adequate disk space", so I am guessing that is a big part of the problem.

But here's my question. How do I free up disk space when my computer cannot even run?

*Note: I've tried going on the BIOS and Advanced Start Up, but I can't seem to find any options that would help with my situation..*

A:BSOD: Cannot start up normally, cannot start up in Safe Mode, "Inadequate Disk Space"

Hi,

Use Ubuntu to free the space.

You can get it from here: http://www.ubuntu.com/desktop/get-ubuntu/download

Step #2 on that page shows you how to create the USB/CD.

Then once you boot into it (choose the option where it just runs off the USB/CD) you can use it to delete your files or to copy them from the Windows Drive to an external hard drive (Note: Do not copy anything to the Ubuntu Filesystem as it will not be saved on shut-down)

Regards,
Reventon

3 more replies
Answer Match 82.32%

Whenever I click "Check for Updates" in the Windows 7 update dialog, the scanning bar moves and moves, but it never passes this step. In eventvwr, there's an error with description:

"Insufficient system resources exist to complete the requested service."

Windows updates never install. This is my laptop in my signature, so system resources shouldn't be a problem, what with 3 GB ram available, core2duo, etc. Any ideas on what I can do to fix this?

Thank you!

A:windows 7 update hangs, "insufficient system resources" error

Hi -

How much HDD space is available?

Have you cleaned out temp file storage areas?
START | cleanmgr

Regards. . .

jcgriff2

`

2 more replies
Answer Match 82.32%

I have a user who gets insufficient resources errors at random times during the day.

browsing to her network drives, causes this error. The drive is not displayed.
Printing causes this error. The document does not print
She basically, can't do anything.
The system has 2gb of memory, not a ton, but taskmgr shows there is lots of room there, CPU usage also isn't high.
Programs usually running are
Autocad 2008
Outlook 2007
and random programs.
pdf documents in Acrobat Pro
Internet Explorer 8

I close out Outlook 2007, and the error goes away, she is able to print and continue as normal.
I open Outlook 2007 back up, and she is running fine for a while.

I remember older versions of Office creating a memory leak, which was addressed in patches and service packs, but I didn't think a memory leak issue existed in 2007.
Anyone else seen this kind of behaviour, and if so, solutions?
Spyware, malware, virus free. No google toolbars or yahoo toolbars present.
 

A:Outlook 2007 causing "Insufficient system resources" error

What are the settings for the Swap file?

Can you post the complete error message as it appears on the screen?
 

1 more replies
Answer Match 82.32%

This happens on a windows xp, srvice pack 3. Not using any programs that is using a lot of memory, no videos or games. Started last week.

also have received error saying "not enough storage is available to proceed with this command" when I try to open up any other programs.

I've ran numerous scans, and the next step is for me to do some work in the registry, but wanted to get some advice first.

I've read to increase the IRPStackSize, haven't done that yet. Any suggestions?

A:"insufficient system resources exist to complet the requested service"

tell about your computer, cpu, ram, harddrive size and free space on c, and video card

12 more replies
Answer Match 82.32%

Here is my system info:

------------------
System Information
------------------
Time of this report: 1/25/2016, 15:17:55
       Machine name: JULIANS
   Operating System: Windows 8.1 64-bit (6.3, Build 9600) (9600.winblue_ltsb.151230-0600)
           Language: English (Regional Setting: English)
System Manufacturer: ASUS
       System Model: All Series
               BIOS: BIOS Date: 02/11/15 20:53:53 Ver: 05.06.05
          Processor: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz (12 CPUs), ~3.3GHz
             Memory: 16384MB RAM
Available OS Memory: 16284MB RAM
          Page File: 10298MB used, 7009MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 11

---------------
Display Devices
---------------
          Card name: NVIDIA GeForce GTX 980 Ti
       Manufacturer: NVIDIA
          Chip type: GeForce GTX 980 Ti
           DAC type: Integrated RAMDAC
        Device Type: Full Device
         Device Key: Enum\PCI\VEN_10DE&DEV_17C8&SUBSYS_49953842&REV_A1
     Display Memory: 14157 MB
   Dedicated Memory: 6015 MB
&nb... Read more

More replies
Answer Match 82.32%

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.... Read more

A:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

3. If neither of those work, its likely that because of the fact that when windows is repairing itself, it is generally putting copies of its system files in the same physical location on your disk. Because your disk is obviously not completely dead, ie....its still loading to the windows 7 startup screen, its just copying files to the bad sectors on your hard drive and gets stuck when loading. This is especially my guess because you said Safe mode is having same problems, even after attempting to repair. In the past, I've tried and salvage a disk by reformatting it and only leaving on partitions which do not contain the bad clusters. This takes some time, and some guess work.....and really this is only a "bandaid" fix because once the disk has bad clusters, its only a matter of time before these things give out. You wouldn't want to trust your important data on it anyways....

I hope this leads you in ... Read more

1 more replies
Answer Match 82.32%

Yes, Differant case, same problem. As the previous post, I loaded Access 97 on an XP Home edition set-up. I also get the same memory problems popping up.
Here are my stats:
Pentium 4 3.20 GHz
1.0 GB RAM
150 GB HD
Any suggestions?
 

A:Solved: Win XP + Access 97: "Insufficient Memory"- differant case

8 more replies
Answer Match 82.32%

For some time my wife's computer has been running real slow - i recently bumped memory up to 3/4 gig, and it did not help much. Before and after i get 'insufficient system resources' and/or 'microsoft is re-allocating ??? memory (is the word virtual?)

i have tried 5 steps - but dss hangs and quits (tell microsoft?) at orafter 'clear temps'. I cleared temps with disk cleaner (microsoft system tools), and ran hijack this without dss. (did not try dss after disk cleaner)

in this email i am putting hijack log first and then panda log - should i have appended panda log? not clear to me from 5 steps.

I appreciate you all out there! thanks: rick berry


Logfile of HijackThis v1.99.1
Scan saved at 6:10:53 PM, on 7/22/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\Program Files\Common Files\AOL\TopSpeed\2.0\aoltsmon.exe
C:\Program Files\Common Files\AOL\1122752349\ee\services\safetyCore\ver210_5_4_1\aolavupd.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\IVT Corporation\BlueSoleil\BT... Read more

A:pc runs slow - "insufficient resources" spyware 112 per pandascan

Hello and welcome to TSF. I apologize for the delay in responding to your log.

I recommend you Subscribe to this thread so you are notified of any replies via email. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant Notification, then click Subscribe.

Download Deckard's System Scanner (DSS) to your Desktop . Note: You must be logged onto an account with administrator privileges.Close all applications and windows.
Double-click on dss.exe to run it, and follow the prompts.
When the scan is complete, two text files will open - minimised > extra.txt and maximised > main.txt.
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of main.txt back in this thread (do not attach it).
Please attach extra.txt to your post.

To attach a file to a new post, simplyClick the[Manage Attachments] button under Additional Options > Attach Files on the post composition page, and
copy and paste the following into the "Upload File from your Computer" box:C:\Deckard\System Scanner\extra.txt

Click Upload.

1 more replies
Answer Match 81.9%

Hey guys,

I've experienced a problem with my particular iTunes program in Windows 7. Whenever the iTunes program was running, it gives me an error stating in the form of a dialog(ue) box:

"The iTunes Library file cannot be saved. You do not have enough access priviges for this operation."

At first, I thought there was a virus that could have altered some files, but I've found out that my trusty 'ol AVG antivirus (free version 2012) that was doing a routine antivirus scan and that would have led into that error.

However, when I stopped the Antivirus scan - the error has simply gone away....

I was wondering how can I prevent this particular problem from re-occurring?

A:Windows 7: iTunes states that a "library file cannot be saved - insufficient rights"

it is scanning your library for nasties If you want to take a chance and if you are sure there will never be a nasty from something you may have downloaded and added to the library, you can exclude folders by using the "Scan specific files or folders" scan.

1 more replies
Answer Match 81.9%

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
pc's on - booting - then "Windows Loading Files" - restart
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

A:"Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies
Answer Match 81.9%

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\sy... Read more

A:"Your System Is Infected" Background + "Internet Security 2010" virus/malware problem

Hi and welcome to TSF.

I'm afraid HijackThis no longer provides the information we require.

We want all our members to perform the steps outlined in the link given below, as far as they possibly can, before posting for assistance.

http://www.techsupportforum.com/f50/...lp-305963.html

If you have problems with any of the steps, simply move on to the next one and make a note of the problem in your reply.

Please note that the Security Forum is always busy, so I would ask for your patience while waiting for a reply - it may take a few days.

This thread will now be closed.

1 more replies
Answer Match 81.9%

Ok where do I begin?! I have been dealing with viruses, spyware/malware for the past week. It all started with Norton advising me that I had been infected with Trojan. Vundo and Trojan.Zonebac. After that I started receiving many different pop ups warning me about critical system alerts. I also had an annoying yellow triangle at the bottom of my screen warning me about different trojans and worms. More evil friends included 2 new icons that had made their home on my desktop one named "Live Safety Center" and the other "Online Security Guide", also installed was a new toolbar named "Security Toolbar 7.1". I have scanned my computer with many different programs and have somehow finally managed to get rid of the pop ups and toolbar, although I know I'm probably still infected somewhere. I'm sorry this is so long but, I wanted to explain EVERYTHING! I'm running Windows XP SP2, and have followed all steps to post. I downloaded DSS, but after many attempts to run, it just wouldn't let me. I do have a fresh hijackthis log and my Panda report, I hope this is good enough.
Many thanks in advance to whomever helps me, I am desperate!
Monica

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:58:35 PM, on 11/15/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe... Read more

A:2 evil friends on desktop "Live Safety Center" and "Online Security Guide" Help?

Hi, thanks for trying to perform all the steps.


Quote:




I downloaded DSS, but after many attempts to run, it just wouldn't let me.




At what stage does DSS stop working?

7 more replies
Answer Match 81.9%

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\i... Read more

More replies
Answer Match 81.9%

Hello all, I started having problems with my pc a few days ago and kept getting this message while trying to boot it up. I'm using a friends lap top to post this to try and get some answers.

Every single time I start up my pc, I get the message that's in my title. I've even tried booting it in safe mode and I still get this message. I've seen threads and posts about this issue, but they all started receiving this message while thier pc's were actually able to get xp to boot.

I'm hoping that this is posted in the right forum.

Can anyone tell me something I can do to get it to work again?

Thanks!

A:"Insufficient system resoures exist to complete the API"

Hmm, I've seen anything from too much ram Vs. not enough HDD space, to hibernation issues.

A suggested fix is detailed below, considering you can't get into the system, even in Safemode:

Removing all but 1 stick of memory, booting into Safemode, unchecking the "Enable Hibernation" box in power Properties, deleting the 'hiberfil.sys' file and then reinstalling your memory.

See 'http://support.microsoft.com/kb/909095' and 'http://support.microsoft.com/kb/330909' for further insight.

2 more replies
Answer Match 81.9%

I cannot map 2 network drives for a user. I get the error "insufficient system resources exist to complete the requested service." The server resources and his system resources are fine. Just to make sure I ran disk clean and defrag. I made sure he had all windows updates and all latest drivers for his machine. The user said that the drives just disappeared one day. He is able to connect to the network. Any ideas?
 

A:Cannot map network drive - "insufficient system resources"

Check this solution.
http://www.chicagotech.net/wineventid.htm

Event ID 2019, 2020, 2021 2022
"Windows cannot logon you because the profile cannot be loaded"
"Insufficient system resources exist to complete the requested service"
"Not enough storage available to process this command"

Symptoms: Some hardware like 3COM Dynamic Access Protocol and USRobotics PCI 56K faxmodem, and software such as Symantec's Norton AntiVirus, Open File Manager and overloading services can cause to leak non-paged pool memory. You may get the following symptoms.
1.You may receive Event ID 2019, "The server was unable to allocate from the system non-paged pool because the pool was empty".
2. Your server may lose network connectivity with its clients and report the following errors in the event log: Event ID: 2020, "The server was unable to allocate from the system paged pool because the pool was empty".
3. Event ID: 2021: Server was unable to create a work item n times in the last seconds seconds.
4. Event ID 2022: "The server was unable to find a free connection 4 times in the last 60 seconds".
5. Your server may stop accepting new user connections and you may receive this message "Windows cannot logon you because the profile cannot be loaded. Contact your network administrator. DETAIL - Insufficient system resources exist to complete the requested service."
6. You may receive the following error: "Not enough stora... Read more

1 more replies
Answer Match 81.9%

I realized there was a problem when I tried to uninstall some programs and was not able to make a system restore point. I opened system restore and saw that the last restore point was 2 months ago. I tried to make a restore point and I got the message that there was insufficient storage (it was set to 15% of a 465 hard drive with 92 used). I turned off System Restore,turned it on again and the same error when I tried to make a sys. restore point. I could live without it because I have some backup devices but would like to fix this if I could. Any ideas appreciated. (I have the W7 Home Edition, 64 bit).

A:System restore not working - "insufficient storage"

Did it give you error code something like this? "(0x8004231F)"

9 more replies
Answer Match 81.9%

HI there,

I have followed the 5 steps to recovery, my computer freezes an hr or 2 after startup. Initially after startup performance is ok. Only a recent problem. Attached is the saved log from panda's online virus scan as well as extra.txt.


"insufficient memory resources" comes up when a program is opened when the system freezes. Also i am unable to shut down normally.
CHEERS IN ADVANCE, will



Deckard's System Scanner v20070426.43
Run by Owner on 2007-05-25 at 12:44:38
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

Successfully created a Deckard's System Scanner Restore Point.


-- Last 5 Restore Point(s) --
5: 2007-05-25 02:44:48 UTC - RP176 - Deckard's System Scanner Restore Point
4: 2007-05-24 07:10:00 UTC - RP175 - System Checkpoint
3: 2007-05-23 06:54:53 UTC - RP174 - Software Distribution Service 2.0
2: 2007-05-23 02:53:28 UTC - RP173 - System Checkpoint
1: 2007-05-22 13:21:00 UTC - RP172 - System Checkpoint


Backed up registry hives.

Performed disk cleanup.


-- HijackThis (run as Owner.exe) -----------------------------------------------

Logfile of HijackThis v1.99.1
Scan saved at 12:46:21 PM, on 25/05/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16441)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32... Read more

A:"insufficient memory resources" when a program is opened

Hi and welcome to the Security Forum.

Apologies for any delay in replying, but we have been rather busy lately, and, of course, all our helpers are volunteers.

My name is Iain and I will be helping you clean your system.

You may wish to Subscribe to this thread (Thread Tools > Subscribe to this thread) so that you are notified when you receive a reply.

Please read these instructions carefully and then print out or copy this page to Notepad in order to assist you when carrying out the fix. You should not have any open browsers or live internet connections when you are following the procedures below.

Note that the fix may take several posts. Please continue to respond to my instructions until I confirm that your log is clean. Remember that although your symptoms may vanish, this does NOT mean that your system is clean.

If there is anything you don't understand, please ask BEFORE proceeding with the fixes.

Please ensure that you follow the instructions in the order I have them listed.



P2P - I see you have P2P software (i.e. BitComet) installed on your machine. We are not here to pass judgment on file-sharing as a concept. However, we will warn you that engaging in this activity and having this kind of software installed on your machine will always make you more susceptible to re-infections. It may be contributing to your current situation. This page will give you further information. Note: Even if you are using a "safe" P2P program, i... Read more

3 more replies
Answer Match 81.9%

I have a Compaq laptop that developed bad sectors on the hard drive. I am trying to reformat the hard drive. I have the Windows 98se program cd and have created a boot disk. I get to the a: prompt and type in format c: and answer yes to the question of whether or not it is okay to lose all info on the c: drive. The computer then starts the process and gets to 49% and stops and gives me the message "insufficient memory". It will not go any further.
What do I need to do? I have tried to supply more memory by removing several software programs on the computer (didn't know if that would work or not) it didn't do a bit of good......help!!! Do I need a new hard drive or what?
 

A:"Insufficient Memory" reformatting hard drive

10 more replies
Answer Match 81.9%

I have already resolved this problem, but the situation was confusing enough that it seems to me to be worth posting the story in hopes of being of use to somebody else.

I have a CanoScan N676U scanner attached to a Windows 98 PC with no printer. Across my network is a Windows XP SP2 PC with a Canon BJC-4300 bubble jet printer. This configuration was working great until my Windows XP PC died and I replaced it with a brand new Windows XP SP2 PC.

On my Win98 PC I deleted the old printer definition, added the printer definition on the new XP PC, and verified that I was able to print. But when I tried to copy from the scanner to the printer I got an error message indicating that it could not print due to "Insufficient memory". Since I had the same amount of memory as always, this was perplexing. As it turns out, the message is completely wrong.

I resolved the problem by updating the Canon software on the Win98 PC. There are actually 3 things to download from the Canon web site: a delete-driver utility, a ScanGear Toolbox package, and the scanner driver package. The recommended sequence is:

1. unplug the USB cable from the scanner
2. run the delete-driver utility to delete the current scanner driver
3. install the new ScanGear Toolbox
4. install the new driver
5. plug in the USB cable

I find it bizarre that replacing one XP system with another introduced this problem, when the scanner was not even connected to the system that was replaced, and the printer did not ch... Read more

More replies
Answer Match 81.9%

Currently i am running Windows XP Home and the following message apears whenever i click on any item on desktop or try to run a program such as internet explorer or even open a section of control panel.

"Insufficient system resources exist to complete the requested service"

I cannot open any program other than access My Documents, My Computer or Control Panel.

I dont know what has happened and what i should do to be able to use my system again. My system is only 8 months old and currently has over 16GB of free space.

Any help would me much appreciated as i need the computer for work purposes.

A:Crisis! - "insufficient system resources exist..."

From your info you may want to Go through the Highjack this procedure Read this First

1 more replies
Answer Match 81.9%

I want to defrag my C and E drives before Norton Ghost backs them up.

Norton Ghost will run a batch file before the backup, so I made a simple one:

C:\Windows\System32\Defrag.exe C: E:

It won't run, however. I get an error message saying I have "insufficient permission" to run Defrag.exe.

The permission for my user name on this file allows reading and execution. It does not permit any permission revisions, even though I have administrator status.

Any suggestions?

A:Defrag.exe won't run from a batch file. "Insufficient permission."

Did you right click the batch file and select run as Administrator?

4 more replies