Tech Problem Aggregator

"Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Q: "Windows Loading Files" infinite loop, Can't Boot USB "disk error"

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
pc's on - booting - then "Windows Loading Files" - restart
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

A: "Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies
Answer Match 138.9%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Answer Match 138%

First time posting here, so I apologize if I my post is too vague.

I started up my laptop (Alienware M14x, Windows 7 64 bit - not sure if it's Ultimate, Home Premium, etc...) yesterday and it displayed a message saying that Windows had failed to boot. I restarted and attempted starting it in Safe Mode and from the last good configuration and both failed, leaving me with the same screen with the two options of starting normally or running startup repair. I also tried disabling driver signature enforcement, which also failed to resolve the issue. I then ran startup repair and just let it go for about 8 hours and it just continuously "attempted to repair." I left it overnight and then let it keep going for most of my day today. Altogether, it was running startup repair for around 30 hours.

I forced a restart and made a system repair disc using another laptop (also Windows 7 64 bit). I booted with the disc and hit next on the language/country menu. Windows 7 showed up as a choice as my operating system, but I could not hit the next button (blue loading circle would replace my cursor whenever I dragged over the window). After a couple minutes, a window appeared that said something along the lines of "identifying disk." This window stuck around for about 5 minutes and when it disappeared I was taken to the system recovery options. On the top of this window it says "Operating System: Unknown on (Unknown) local disk." I do not have my Windows 7 i... Read more

A:Windows 7 will not boot, infinite startup repair loop + "unknown disk"

Work through the rest of the steps for Troubleshooting Windows 7 Failure to Start

1 more replies
Answer Match 119.4%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Answer Match 118.5%

So I just got home today, turned my computer on and all I see is an infinite loop.
I use a Dell XPS 7100. I didn't install anything in the past month, this just came out of nowhere.
I did a little searching and found my only option is to system restore.
However it doesn't allow me to enter the F8 repair options, only F2 and F12.
I do however have my windows 7 OS disc. I tried calling Dell tech support and they're asking $129 to guide me through a system restore... Yeah, no.
If there's anything I can do please tell me, and if my only option is a system restore, please link me to a proper guide that includes using the operating disc.

A:Windows 7 "Window's is loading files.." Loop!

Instructions here: option 2 . quite a long way down the page - from BOOT
System Restore
Download here: Windows 7 Direct Download Links

Try a system restore from the booted dvd/usb. If you end up doing a clean reinstall, you will need product key. You shoulc have one on a stiker on the machine, perhaps under the battery.

7 more replies
Answer Match 118.2%

Hello,

1) At boot up, my computer will prompt with the "Windows - No Disk" error message. I try to cancel each time and usually by the the third cancel it finally goes away.

2) Internet Explorer 6 will freeze with the "hungapp" error message. I have to do a CTRL+ ALT+ DEL to close. This happens quite frequently and just about makes IE 6 unusable.

Any ideas as to what can be causing this? Below is my HijackThis log:
=====================================
Logfile of HijackThis v1.99.1
Scan saved at 22:11:43, on 1/20/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Belkin\Bluetooth Software\bin\btwdins.exe
C:\Program Files\Yahoo!\Antivirus\ISafe.exe
C:\WINDOWS\System32\snmp.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Belkin Bulldog Plus\upsd.exe
C:\Program Files\RealVNC\VNC4\WinVNC4.exe
C:\WINDOWS\system32\MsPMSPSv.exe
C:\Program Files\Yahoo!\Antivirus\VetMsg.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOWS\Dit.exe
C:\Program Files\Lexmark X1100 Series\lxbkbmgr.exe
C:\Progr... Read more

A:Windows "No Disk" error at boot and "hungapp" error with IE 6

Click Run, type in msconfig, click OK, click Startup tab find dit.exe and uncheck it, click apply and reboot system. This worked for me with "No Disk" problem
 

1 more replies
Answer Match 117.9%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Answer Match 114.6%

Infinite Loop

What is an infinite loop error, and how does it affect playing the games?
 

A:What is "Infinite Loop" error

Check --> here

Next time PLEASE use the search feature :dead:
 

10 more replies
Answer Match 114.6%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Answer Match 113.7%

Hi, just as the question title says, I am having a RunDLL error with the windows dll "streamci.dll".

I am getting this error while trying to install my Audio Drivers on my newly set up XP OS.

During the installation of XP, a couple of files were not copied properly.
because the CD was scratched up pretty badly, but I had no other copy of the CD, I had to just skip and hope windows installed, and was usable...

Are there any tools, that can scan your computer for missing windows DLL's and re-install them?
I have already tried downloading the file streamci.dll from the internet and installing it with

Code:
regsvr32 streamci.dll
in the command line, but I get the following error:
RegSvr32

"Streamci.dll was loaded, but the DllRegisterServer entry point was not found.
This file can not be registered."Click to expand...

Would downloading and re-installing SP2 from microsoft, possibly fix this problem?

Any Ideas?
 

A:RUNDLL ~ "Error Loading Streamci" ~ "The Specified module could not be found"

What version of XP Pro did you install with that CD?

XP Pro original

XP Pro SP1

XP Pro SP2

Have you downloaded and installed the SP3 upgrade?

-----------------------------------------------------------------
 

1 more replies
Answer Match 113.1%

Hello,

I need help with this Diskette issue please. "Diskette Drive 0 Seek Failure"
I've had this problem a few times in a couple of years and I have been able to fix the error by pressing F2 and going to the SETUP. And I've done this with no issues. But this time I thought I fixed it but now I get this new error: "A disk read error occurred Press Ctrl+Alt+Del to restart". After I press Ctrl+Alt+Del it takes me back to the same error massage "A disk read error occurred Press Ctrl+Alt+Del to restart". Need help please. This is a Dell Desktop, Windows XP.
Thank you.

Sue
 

A:"Diskette Drive 0 Seek Failure" Error Then "A disk read error occurred Press Ctrl..."

9 more replies
Answer Match 112.8%

I have Windows 7 Ultimate x64

The other day I was afk while listening to loud music from my computer.
Suddenly the speakers began screaming in a high pitch and when I got to my computer it had frozen.
I tried to reboot it, but it simply froze at the Windows loading screen with the floating balls of light and the text: "Starting Windows".
I have also tried booting from the Windows 7 Installation DVD, but it freezes at the loading screen once again.

I then tried to use the Startup Repair Tool, only to find Windows freezing at the loading screen again.

When trying to reboot in safe mode, it freezes again, just after having loaded "disk.sys"

These are the things I have tried so far:
- I have run memory tests using Memtest86.
- I have run hard disk drive tests using SeaTools
- No errors were found.
- I removed the sound card from the MB, with same boot result.
*EDIT*
- I have reset the BIOS
- I booted with 2GB of RAM instead of my standard 4GB

Anyone who can think of other things I should try?

A:Windows freeze on boot at "Starting Windows" and "LOADED ...\disk.sys"

Suggest you run SFC. {Option 2}
You may need to run it at least 3 times.
Let us know the report at the end please.

SFC /SCANNOW Command - System File Checker

5 more replies
Answer Match 112.8%

I have a big problem here,
I have used my hard disk for 9month,
Yesterday when I watched movie on the half way,
My hard disk suddenly disfuntion,
And I thought my laptop problem due to always lagging so I restart my computer.
But after that I can't read my hard disk (WD)in my computer.
It can read in computer management there.

Ways I try:
1)I try to uninstall and reinstalled again,BUT it doesn't work.
2)I try to unchecked the hide folder and device at view.
3)I try to update the software BUT it still disfunction.
4)I try to use disk management and initialized it BUT there appeared CANNOT INITIALIZED Due to I/O device error.

Any solution for me ?

A:Hard Disk can't read in "my computer ", "initialized",I/O device error

The most usual cause is that the Hard Drive is beginning to fail. Back up your stuff. Go to the website of the manufacturer and test the drive.

8 more replies
Answer Match 112.8%

hi. i'm new here. nice to meet all of you!
just like a lot of folks i'm sure, i've come here because there are some weird things running on my pc that shouldnt be in there.
please help!!!!!!

heres the hijack log
(thanks in advance. i don't know much about this computer virus stuff.)
~eric

Logfile of HijackThis v1.99.1
Scan saved at 10:06:40 AM, on 9/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Dantz\Retrospect\retrorun.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\ZoneLabs\vsmon.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\SYSTEM32\qttask.exe
C:\Program Files\Java\jre1.5.0_01\bin\jusched.exe
C:\PROGRA~1\VERIZO~1\HELPSU~1\VERIZO~1.EXE
C:\PROGRA~1\VERIZO~1\HELPSU~1\SMARTB~1\MotiveSB.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\PROGRA~1\Sony\SONICS~1\SsAAD.exe
C:\Program Files\Common Files\Verizon Online\ConnMgr\cmisrv.exe
C:\Program Files\Windows Media Components\Encoder\Wmencagt.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\ZoneLabs\isafe.exe
C:\Program Files\Common Files\Verizon Online\AppMgr\vz... Read more

A:"windows no disk" and "winsilly" "win956temp"

11 more replies
Answer Match 112.5%

So a couple days ago my PC began making a high pitch buzz. I turned the computer off and when I came home and tried to start it up the next day it wouldn't start. I decided that the power supply must have died and that perhaps it was the power supply fan that was making the noise (I recently replaced the case fan).

I bought a new power supply and installed it. But now when I try to boot up the computer I get an error message "Disk Read Error". It instructs me to press ctrl alt delete to try again. When I do that, it gives me a new error message "Error Loading OS".

The hard drive is only a couple of months old. My previous one died and I was able to clone the contents on to the brand new one and it has worked great ever since.

I am concerned that somehow the hard drive became corrupted or damaged when the power supply failed although I'm not quite sure how, but its the best explanation I can figure.

Any thoughts on next steps. Is there a process I can run that may repair the situation, assuming its not physical?

If not then I guess I need to figure out trying to get the content off and on to a new hard drive if possible.
 

A:"Disk Read Error" / "Error Loading OS"

What verison of Windows are you using? It sounds like you have a corrupt BOOT file for your Windows installation. This could very much be caused by the power supply dying. If it happened to be writing or using something with that file or near it, it could have corrupted it. If you have Windows 7, use the Windows 7 DVD and do the option for checking for problems. If you have a corrupt boot file, it will repair it (hopefully). You can download Windows 7 DVDs free online. The main thing that matters is your registration key for Windows. Do the Windows 7 repair option and see if that helps. If not then you might have to reinstall Windows 7. Don't format as you will lose all of your files. You can install a new Windows and it will keep all your old files. The bad thing is you will lose all your Windows settings and programs you installed will not work, you will have to resinstall them. But all of your files will be saved. Hopefully the repair option works first.....
 

2 more replies
Answer Match 112.5%

Hi everyone,
I have had a search around for the issue I am having but I find it hard to explain.

I currently run windows of a crucial m400 SSD and it used to boot in less than a minute. More recently (and apparently overnight) boot time became several minutes.

I turned on verbose boot and it loads the files very quickly (just scans quickly infront of me) and then when it comes to the screen that reads the following (and see attached):

"Microsoft (R) Windows (R) Version 6.1 (Build 7601: Service Pack 1)

8 System Processors [8184 MB Memory] Multiprocessor Kernel"

It sits there for several minutes before then loading the desktop.

I am unsure how to diagnose this issue further and would greatly appreciate some guidance onto how to drill down into this further.

Thanks,
Chalima

A:2mins delay during boot after "loading windows files" before Desktop

Hello and welcome Chalima if you haven't done these already you could start with this SFC /SCANNOW Command - System File Checker
then
Disk Check
onto this Troubleshooting Steps for Windows 7

You could just quickly check in msconfig what you have starting at boot too I just keep security ticked (try first)

Start > type msconfig > right click run as admin > check the Start as in pic .

Plus you always have my favourite Optimize Windows 7[2]=Performance Maintenance

6 more replies
Answer Match 111.9%

Hello....
I just completed a "Clean ReInstall" of Win 7 (Pro) 64 bit.
on a Lenovo E545 Think Pad 2 months New, **Came with both Win 7 Pro/Win 8.1 Pro Discs
(the Clean Install was done to remove a Virus that would not allow me to Update)

With all Bios set to Start from the DVD 1st.
No peripheral attached
Bios is Set to Factory Defaults (Except with the DVD player being 1st)
This is my THIRD SET of Recovery DVD's from Lenovo

What I get is the DVD starts (I tested the DVD on another Machine, It is Good)
The E545 goes to the Windows Loading page and freezes.
"Normal Startup" (Not working) goes to colored Icon page and stops.

Any suggested Help is Much Needed

Thank You Steve

A:Boot Up Freezes at "Windows Loading Files"

Hi Steve -

Did you disable Secure Boot in BIOS setup? This is required to install Win7 on a Win8 PC. Downgrade Windows 8 to Windows 7. Then boot the installation DVD as a UEFI device, delete all partitions during install.

I would not use a Factory Recovery disk as this includes all of the bloatware which interferes with WIn7 performance. Instead follow these steps to do a Clean Reinstall Windows 7. It discusses in Step 1 how to find safe reinstallation media for your licensed version.

However if the PC came with Win8, then most likely any Win7 media is a clean Installation disk without the bloatware, perhaps with some branding and self-activation included if there was no COA sticker provided with the Win7 Product Key due to it being a 7 Downgrade. Either way you don't want the added crap.

If problems persist please take a picture of your install media, if possible check its size on disk in another PC and provide a screenshot of file content. Also in BIOS setup let us see settings related to EFI, UEFI, CSM, Legacy BIOS, Secure Boot and Boot order. Screenshots and Files - Upload and Post in Seven Forums - Windows 7 Forums

1 more replies
Answer Match 111.6%

I recently had my computer crash due to a TROJAN virus and at that time I had Windows XP service pack 3 which my computer man installed for me. After being infected I had to completely reinstall EVERY thing on my computer taking my computer back down to Service Pack 1 the only operating disks I had. Now when I do a Disk Clean Up, it doesn't have the option to "Compress Old Files." Can some one please tell me why this option is not there and how I could go about fixing this. Thank you.
 

A:"COMPRESS OLD FILES" not and option in my "Disk Clean Up"

6 more replies
Answer Match 111.6%

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.... Read more

A:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

3. If neither of those work, its likely that because of the fact that when windows is repairing itself, it is generally putting copies of its system files in the same physical location on your disk. Because your disk is obviously not completely dead, ie....its still loading to the windows 7 startup screen, its just copying files to the bad sectors on your hard drive and gets stuck when loading. This is especially my guess because you said Safe mode is having same problems, even after attempting to repair. In the past, I've tried and salvage a disk by reformatting it and only leaving on partitions which do not contain the bad clusters. This takes some time, and some guess work.....and really this is only a "bandaid" fix because once the disk has bad clusters, its only a matter of time before these things give out. You wouldn't want to trust your important data on it anyways....

I hope this leads you in ... Read more

1 more replies
Answer Match 111%

Hi,

I was browsing the internet, and suddenly my computer rebooted itself. When it was loading up again, its gets to the dell inspiron logo, then cuts off to a page where all it says is "windows is loading files..." and a progress bar below it. the progress bar completes, and its start the loop again, to the inspirion logo, and back to the "windows is loading files"

When the ispiron logo is up, i can click f2 (setup) or click f12 (reboot option) but this is all i am able to do.

Can anyone help me with a solution, or has anyone seen this before?

Cheers

A:Windows 7 Reboot loop: "Windows is loading files..."

Did you update any software/ hardware before the reboot? You could have been hit with a virus if it happened randomly.

Did you create a system repair disk? Or if you have a system reserved partition keep tapping F8 on reboot until you get the repair my computer option.

Try booting into Safe Mode first.

Also you can enter System Recovery Mode (repair my computer) and do a System Restore to before the problem occurred.

Safe Mode

System Restore

System Recovery Options

5 more replies
Answer Match 110.7%

I just got done using the MS fix it tool to remedy the compress old files hang that occured when you used the disk clean up tool . There were about 20k old files that no matter how many times you ran disk clean up they were never compressed ...as a matter of fact at times I would actually see an "Increase" in files listed in the compress old files line AFTER I did selected "compress old files" clean!!!

So I used the MS fix it tool to solve the problem and ....you guessed it the tool removed the option for "compress old files" ! Now it is no longer there. MS states that they deleted this option to prevent the hang issue. But this is why I want to know whether these old files are actually being compressed when i use the defrag and it says "compacting files" ..

Any help would be greatly appreciated.

A:Is "compacting" files in defrag the same as "compressing old files" in disk clean up?

Hi

The 'compressing files' referred to by a defragmenter is the process of moving the files it has put together to the start of the drive.

When defragmenting files, it moves the pieces of the file to an empty space further into the drive. Once it has done this to all the files, it moves them back to the start of the drive as this is generally the fastest part.

This doesn't compress files like the option in disk clean up.

8 more replies
Answer Match 110.1%

Whenever I try to get updates I get the following message:

"Restart you computer to install important updates" and "Windows
can't update important files and services while the system is
using them. Save any open files and restart the computer, and
then try to check for new updates."

This is constant, never ends.

It may be related to the fact that I once clicked on getting
Windows 10 (download later) and realized that was a bad mistake,
because after that MS didn't give me any real choice: either do
it now, or do it in the next 72 hours! I tried to follow some
advice on various forums to get rid of this, but none of my
attempts were successful.

I do NOT want Windows 10 right now, nor in the next 72 hours.

I apparently can no longer get updates, including security
updates, not absolutely sure. The one thing that is certain is
that I am getting this nag screen from "Windows Update" about
restarting my computer, which I have done a hundred times in
the past couple of days.

I need some help.

Thanks in advance.

More replies
Answer Match 110.1%

Ok, so basically, whenever I turn the computer on, 3 error messages appear:

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee.exe

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee1.exe

- Error loading H:/Archiv~/GBPLUG~/gbiehcef.dll. Couldn't find specific module.

(sorry if some terms are incorrect, my computer is in Spanish, to I tried to translate as best as possible)

Please help me solve this terrible problem, it is really getting me on my nerves! (oh, and if this helps, I've recently donwloaded this so called "Limewire acceleration", and whenever I ran the setup, it didn't work. I don't really remember the name of the website I downloaded it from, sorry...)

A:Can't Open "My Documents", "Trash" or other files in "My Computer"!?

Hi and Welcome to the forum

I am almost certain that you have malware problems. Most like caused by you doing file sharing/ P2P - Limewire.

Suggest that you go here and follow the directions:

http://www.techsupportforum.com/secu...oval-help.html

Please be advised that the malware people are very busy and it could take a couple days to assist you.

BG

1 more replies
Answer Match 109.8%

Hi Guys, any ideas how to access my external hard drive [TOSHIBA MK3029GACE] device manager can see it but it does not appear in disc management.

I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management.

Please check the attached screen shot..

Thanks for the help....

A:HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management

Specs show that drive has a ATA-6 interface (P-ATA, or IDE). How are you connecting this drive to your laptop? Does the laptop have a PATA or SATA connection? Does it use an adapter?

1 more replies
Answer Match 109.5%

As far as I know, this has been an age-old problem with nVidia graphics chipsets having problems with the standard drivers. I recently upgraded from a GeForce MX/MX400 (not the 4000, the 400), to an Xmdia Geforce FX 5500. The card is nice and fast, and runs X2: The Threat (www.egosoft.com) very smoothly and sharply, but when I tried to run Rollercoaster Tycoon 3, it did two things. The first thing that happened was when it got to the main menu, everything but the buttons and the slideshow background appeared, the music started, and the mouse was responsive. I kept clicking around and pressing escape, because it doesn't ever wait like that. After about maybe 20-30 seconds, it quit to desktop saying "The driver nv4_disp is not functioning properly and has been shut down. Please restart your computer, and a log of this error will be generated to be sent to Microsoft". The screen was 16 color with 640x480. So, I reboot and send the error report. I start the game up again, and the same thing happens in the main menu, except that it crashes with a BSOD saying "nv4_disp.dll encountered an infinite loop". I then restarted and installed the latest drivers from nVidia (the driver I was running was from Xmdia's CD, which looked like an older driver from about 2003-2004). Now, Rollercoaster Tycoon 3's behavior is like this: The main menu still pauses for a time, but then it appears with the slideshow images and buttons, but the button images appear cor... Read more

A:NV4_DISP driver causing "Infinite Loop"

In a situation like this, I would consult nvidia re this. As well, you might try older drivers for the 5500.
 

1 more replies
Answer Match 109.5%

Hello there, when the desktop loads up, I get this strange message:

"Open With:

Choose the program you want to use to open this file:

File: Media"



Does anyone have any ideas why?

I have a screenshot of the programs which run at startup:



I have a HiJackThis log if it helps:


Code:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 08:28:24, on 29/05/2011
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16421)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskhost.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\Logitech\SetPointP\SetPoint.exe
C:\Program Files\VIA\VIAudioi\VDeck\VDeck.exe
C:\Program Files\COMODO\COMODO Internet Security\cfp.exe
C:\Program Files\Acronis\OnlineBackupStandalone\TrueImageMonitor.exe
C:\Program Files\Acronis\TrueImageHome\TrueImageMonitor.exe
C:\Program Files\Common Files\Acronis\Schedule2\schedhlp.exe
C:\Program Files\Common Files\LogiShrd\KHAL3\KHALMNPR.EXE
C:\Program Files\HP\HP Software Update\hpwuschd2.exe
C:\Windows\system32\rundll32.exe
C:\Users\Media Centre\AppData\Local\Google\Update\1.3.21.57\GoogleCrashHandler.exe
C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Siber Systems\AI RoboForm\RoboTaskBarIcon.exe
C:\Program Files\Common Files\Microsoft Shared\Ink\InputPersonalization.exe
C:\Windows\system32\mspaint.exe
C:\Program Files\Mozilla Firefox\plugin-containe... Read more

A:Windows 7 32 bit, when loading "Open With: ?" "File: Media" comes up

There must be an error with one of the startup settings.
Please use Autoruns by Sysinternals/Microsoft to see more info about Programs loading with your system.
Pay attention to Logon tab.

Looks like for some reason it is trying to load a folder as a file. "Media" is a part of a folder path.
Try to uncheck all values,where Media is a part of the path.

Also, please check for viruses with Kaspersky Virus Removal Tool Download
or Malwarebytes : Malwarebytes Anti-Malware is a free download that removes viruses and malware from your computer

4 more replies
Answer Match 109.2%

I had a fresh install of 7 and everything was working fine.
All of a sudden it starts randomly freezing and programs start responding.
I got KERNAL_PAGING_ERROR BSODs etc. and got a new disk, thinking it was that.
After cloning the new disk which didn't work, and produced loads of errors on chkdsk, I decided to do a clean install of 7.

I still keep getting "Disk boot error, insert system disk and press enter", and when it does boot, it freezes all the time and every time I click the start button, it basically crashed and is messed up.

Tried new SATA cable and ports. Any ideas?
 

A:Windows 7 freezing, "Disk boot error, insert system disk and press enter"

BIOS settings or Motherboard issues?

Have you checked with the manufacturer website for the Motherboard that you have the Windows 7 drivers?

Is your Windows 7 DVD a retail copy...or the pre release BETA....or dodgy(in which case problems might lie there)
 

1 more replies
Answer Match 108.6%

Hey guys, I recently left my computer on and I think Windows Update messed everything up. Whenever I try to boot into Windows XP, I get past the loading screen and right as the login window is about to popup, the computer just restarts. It does this over and over and I can't even boot into safe mode to do a system restore. I have the Windows XP cd, but I don't really know if that will help me with anything. Can I just reinstall Windows without formatting to prevent the loss of important files? Or has anyone else had a similar problem and figured out how to fix it?

Thanks in advance,

-Joe

A:weird "infinite loop" restart :/

silly question. Have you tried a cold boot, pressed F8 and chose the option "Use settings from last successful boot" ?

It's a start. I would be happy to go into more detail on your options if this indeed doesn't do the trick. Sometimes you can install a program and that program will install a windows service. Well that windows service sometimes can be a major issue with compatibility. I've seen this happen so many times. But the tough thing is if You can't get into safe mode, it it hard to turn off the auto reboot option of the BSOD. I will wait for your reply.

9 more replies
Answer Match 108.3%

I just installed a new 60gb hard drive as a back up to put my movie files on,it installed fine and it works fine but i get "windows milenium emergancy boot" when i boot the system up .I don"t know if this error is serious but I do know that the system seems less stable in this boot mode..can someone please help? thanx
 

A:after installing new "hard drive" it starts with "windows emergency boot"

closing duplicate, view this thread
http://forums.techguy.org/t76279/s5b1a29d68c715c9a36d25291025adddb.html
 

1 more replies
Answer Match 108.3%

Hi,
I am trying to install Windows 7 Ultimate 64bit on to a dell xps and having a lot of problems.
The Computer has 3 harddisks
C:\ - Vista (Came preloaded With the Pc when i bought it)
D:\ Vista Recovery 10GB thing (Came preloaded With the Pc when i bought it)
F:\ Empty drive i want to install windows 7 on
J:\ Harddrive for everything else

The problem is when i boot from the disk i can start the installer but when it allows me to choose where to install to the harddrive always comes up as "Can not install blah blah, Windows can NOT boot from this Disk"

I have tried all sorts of ways to get around this like unplugging everything apart from the cd drive and harddrive i want to install it on, im getting really fed up with this. Is the problem that im trying to do a dual boot?
I also read somewhere about getting sata drivers for my motherboard but after hours of searching the web gave up.

All i can tell that my motherboard is is a FOXCONN LS36 but i can't find sata drivers for this anywhere!
On the dell website i tried all of the Sata downloads but if i locate the downloaded file whilst in win7 setup it doesn't like the file.
Am i doing some majorly wrong and stupid here?
Please help me!!!

Spud
 

More replies
Answer Match 108.3%

as described in the title when i boot my laptop: http://www.newegg.com/Product/Product.aspx?Item=N82E16834117780R
i get the "disk read error -> press cntrl alt del to restart" message. I then tried to access the backup partition through f10 only to run into this error "status : 0xc00000e9 Info : an unexpected I/O error has occurred" it seems that it cant communicate with my hard drive.

I read a few other forum posts but didnt see anyone have the 0xc00000e9 error also. Bios boot priorities are in order if that matters.

Is there a fix without having to replace the entire HD and buy a new vista installation(preinstalled w/ no disc in the box).

Im very reluctant to take it to a service center as i can very likely fix it myself (with the help of the friendly people here of course), only problem is im having a little trouble..finding.. my HD in this damn notebook.. heh, ill figure that part out. new to notebook repair.

Thanks in advance. Danny

edit: found the HD, doesnt look like it even uses a cable, just plugs right into what i assume is the mb. dont know if that helps just supplying what i can.
 

More replies
Answer Match 108%

So I have a pretty, well not old, but it's not a product they carry anymore external hard drive and I had some issues with it in the past (mainly the usb port not being soldered on properly and falling off); so I just received all my replacement cords for it and ran it, it took *forever* for it to load up, which I felt was understandable seeing as there's like 200+ GB on it but when I go to like drag one item from it, it'll take more than 10 minutes and if I cancel it, it just loads.. and loads and loads; I don't know what it's doing but when it's like that, I can't do anything with it and to actually make it browse-able again, I have to force a shut down. (hold the power button)

And the files I am trying to move are just 2.5MB so they shouldn't even be taking this long..

I have quite a few files I wish to save otherwise I'd just format the whole thing but I can't when it just hangs onto the loading.

Is there a way for me to save these files?
I tried to upload them a hosting but it freezes when I do; same with dragging the images into windows paint.

Please help!

I just tried to upload some of the pictures to mediafire and it literally froze my web browser.







  
Quote: Originally Posted by notsotechsavvy


I stand corrected, apparently this portable hard drive is not done frustrating me just yet.
Pretty sure I forgot to mention what portable hard drive I have and here it is.
The problem I'm having now is that I managed... Read more

A:External hard drive "hanging" or infinite loading.

Fill out all of the System Specs in the lower left hand corner of your message. If we know what is in your PC it will help to better figure out the problem.

6 more replies
Answer Match 107.7%

I get this error in a box everytime I boot up. I'v already tried Windows defender, Ad-aware, my Mcafee virus scan and none of these seem to get rid of it? I have attached a copy of the "Hijack this" scan log for your use. I was told that this might help.
 

A:Windows xp home "No Disk error" on boot

I have posted the HijackThis log file to the open forum for you so it will be seen peoperly by an expert. Please to do this.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:21:00 PM, on 7/29/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16473)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\system32\drivers\KodakCCS.exe
C:\WINDOWS\system32\LxrJD31s.exe
C:\Program Files\Common Files\McAfee\HackerWatch\HWAPI.exe
C:\PROGRA~1\McAfee\MSC\mcmscsvc.exe
c:\program files\common files\mcafee\mna\mcnasvc.exe
C:\PROGRA~1\McAfee\VIRUSS~1\mcods.exe
C:\PROGRA~1\McAfee\MSC\mcpromgr.exe
c:\PROGRA~1\COMMON~1\mcafee\redirsvc\redirsvc.exe
C:\PROGRA~1\McAfee\VIRUSS~1\mcshield.exe
C:\PROGRA~1\McAfee\VIRUSS~1\mcsysmon.exe
C:\Program Files\McAfee\MPF\MPFSrv.exe
C:\Program Files\Softex\OmniPass\Omniserv.exe
C:\Program Files\Softex\OmniPass\OPXPApp.exe
C:\Program Files\SiteAdvisor\5020\SAService.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\mcafee.com\agent\mcagent.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\Program Files\Viewpoint\Viewpoint Manager\ViewMgr.exe
C:\Program Files\Common Files\Real\Up... Read more

2 more replies
Answer Match 107.7%

Hi. I'm thinking about repairing Windows 7Home Premium 32bit with the DVD, because of BSOD, but I hesitate.

I first need to know if the backup folder called "Windows.old" will be a COPY (keeps Date Modified but updates Date Created) or a CUT (simply moves all folders to an other, thus doesn't change Date Created). Thanks!
So of course, only those who have ever reinstalled Windows 7 may know the answer. If you don't know but have reinstalled Windows 7 at least once, please spare 30 seconds to check, simply find a file like a picture or music that you had before the reinstall, and see in the bottom bar of explorer if its Date Created is the original or the reinstall date. You can also click Display tab in Explorer, then Sort by > Others > check "Date Created", > OK > Click display again > Sort by > Date Created. Don't mistake with Date Modified, I know the original Date Modified is kept upon copying, but it will update if you modify the file obviously. Please be honest and double check, losing 5.9 years old dates of my past would be heartbreaking, like mixing the pages of my diary!

Date Created is very important to me (and is underrated because it's not the default sorting option unlike Name/Type/Date Modified) because my computer is 5.9 years old, now has thousands of files and folders and it's easy to find them back and organize them with Date Created sorting if I didn't write tags or description in the file name.
If it doesn't ke... Read more

More replies
Answer Match 107.7%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Answer Match 107.4%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Answer Match 106.8%

I left my Dell Inspirion 600 laptop on over night and it died. Once I charged it and turned it back on the next day, I received this error upon starting windows...

Loading PBR for descriptior 2...done.

A disk read error occurred
Press CTRL+ALT+Del to restart

Is it possible my hard drive just crashed??

*Currently using my Dell Desktop PC to research info on this error

Thanks

A:Loading PBR for descriptor 2... done "A disk read error occurred"

hi, do you have a diagnostics partition on your inspiron, on mine I press F12 as the computer boots. If you do, run the extended test on the hard drive. At this point I should ask if your important files/pics etc are backed up as any test on a failing hard drive is intensive. You ask if your hard drive "just crashed", have you tried restarting to see if you have access.

5 more replies
Answer Match 106.5%

Problem:

Boot loop started with XP during XP boot screen. I hit F8 during XP loading screen to stop restart after crash, and a blue screen with "unable to mount" [hard drive] error popped up.

Here's what I've tried:
1.) I am unable to enter recovery console because it fails to recognize my HD. So I hit F6 and manually installed the SATA drivers, but then recovery console hangs at "examining/analysing hard drive" (I forget the exact message).
2.) I am able to load an old stable HD with XP. But when I make the new unstable HD a slave to the old HD, the old HD refuses to load.

So here's what I'm asking:

1.) Is there a way I can get recovery console to recognize my HD so I can attempt some repairs on it?
2.) Is there a way I can use my old stable XP HD to access my new problem HD so I can at least save the data on it?
3.) Any ideas on how to repair the HD?

As far as I can tell, the BIOS does recognize the HD since it does appear in the RAID selection menu (no, I am not using RAID).

Another footnote is that this new HD has always had problems with being recognized properly by my BIOS. Often from a cold boot it would give the message that "invalid boot sector HD not recognized" (paraphrasing from memory), but with a soft restart of Ctrl-Alt-Del it would load properly with new HD as master and no errors (it's the only HD installed).

Any suggestions?
 

A:Solved: Boot Loop with "Unable to mount" error

10 more replies
Answer Match 106.2%

I get a Windows "No Disk" error often when I boot or load some programs - particularly any browser. This does not occur in safe mode. If I click on either "continue" or "ignore" twice I can continue. No disk is specified. Microsoft has advice in article KB330137 relating to this but it assumes that I have a disk assigned to C: which I don't.

I have scanned for spyware and virus using several programs.
 

More replies
Answer Match 106.2%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Answer Match 106.2%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Answer Match 105.9%

Hi,

I have a Toshiba r700-181 (PT310E) work laptop. It is running Windows 7 x64 Enterprise.

It has one 4GB stick of ram which is PC3 10600. Windows works fine with this.

I have obtained a 4GB stick of ram which is PC3 12800. With just this one in, Windows works fine.

However, if I have BOTH sticks put in, the BIOS recognises that there is 8GB installed, but Windows fails to boot.

It gets stuck at the "Starting Windows" screen. If I restart it asks me if I want to start windows normally or to run the Windows repair. If I try that I get the message: "Error: 0xc0000225. The boot selection failed because a required device is inaccessible."

I tried using a Windows 7 System Restore disc but that doesnt work...

If I try either of the sticks in the laptop one at a time, then Windows 7 boots up fine.

Is this just down to the laptop not being compatible with the mixture of speeds? I thought that if they were mixed it would just use the lower speed by default?

So confused

A:Laptop hangs at "Starting Windows" or getting "Error 0xC0000225"

Hello borito, Welcome to SevenForums!

Is this a laptop provided by a company you work for by any chance?

9 more replies
Answer Match 105.9%

To anyone that can help me out:

I purchased a windows anytime upgrade key and upgraded my system from windows 7 home premiuim to windows 7 ultimate now when my windows tries to update I get this: (See image titled "message")



To bring you up to speed as to what I've done so far:
I ran sfc\scannow and no errors were found
I downloaded the hotfixes and apllied them and still could not update
I tried to do a system restore to the point before I upgraded, but I could not perform one because all of my previous attempts to update windows automatically creates a system restore and all the restore points were within a 24 hour period
I installed a system update readiness tool as per "windows help and support" dialogue box

To see the updates that did not install, refer to the image titled "update"

Really, I feel like I've done my homework and I've exhausted my efforts as to how to fix this problem. I'm currently going to school for computers and so I really like to apply what I learn in real world situations, but this one has got me stumped!

I'm also attaching my checksur.log I don't understand it now and it looks like a foreign language to me, but as I progress through my information systems degree I hope one day I can become a techsupport forum partner.

Any help would be greatly appreciated!!

Thanks in advance,

Techstudent36

HERE IS MY CHECKSUR.LOG


=================================
Checking System Update Read... Read more

A:windows update error code "WindowsUpdate_80073712" "WindowsUpdate_dt000"

Hi have you tried running a start up repair An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

7 more replies
Answer Match 105.9%

I am running Windows 7 on an iMac with VMware Fusion. Everything was fine for three months. Then slowly, problems started showing up. A notice would come up saying that Windows Explorer wasn't working and needed to close. (re-booted) So far, it is still only occasionally.

Then the screen size display began to change EVERY time Windows was restarted. The change was to a different size each time. (changed it back) It is getting to be a real pain!

Now the "My Computer" screen only works occasionally.(in the beginning, I rebooted. Now that doesn't help) When it doesn't work - the box is mostly blank with a horizontal "thermometer" where the words "my computer belong" slowly moving across the top. Even when the line is filled, the "my computer" screen doesn't fill in. When I do get a screen, I am only able to move files or folders for a short time. After that, I get a square when clicked on says "calculating" - and it never finishes. This happens with moving many, or only two or three files. I am also unable to click and highlight several random files with the control key held. This also happens with the recycle bin. I am unable to delete the files there.

I have a 3.06 GHz Intel Core 2 Duo with 4GB 800 MHz I use three different registry cleaners (had lots of problems before Windows7 and am not too happy with 7) and a Malware program. I have a software program that offers a repair feature on its disc. Is ther... Read more

More replies
Answer Match 105.9%

Without quotes, no extension. Anyone know what they are and if they're legit?

Thanks.

A:My c:\windows folder has a couple of strange files: "D" and "@#"

They dont see legit to me. Try to do a virus search. Otherwise i recommend factory reset

9 more replies
Answer Match 105.6%

i've been relying on going to "internet options","general" and "delete" then ticking all the boxes on that page..i found out that by doing this,my temporary internet file swere NOT being deleted.is this a vista problem? my pc came to a complete sludge of a slow down today and i found that my internet files folder had files going back a year that hadn't been deleted as i've been relying on ticking those boxes..i had tons and tons of and tons of files.i'm wondering if this is the norm and also is it possible that other files are not being deleted when using that method? if so,then i probably have folders that are totally loaded with trash.
 

A:Solved: Had to delete temp internet files by "view files" ,"select all" ,"delete"

Have you ever unticked Preserve Favorites website data?
 

1 more replies
Answer Match 105.6%

Afternoon, I'm a bit boggled by this issue we are having on a PC at our office. It seems that the PC normally will boot up and the memory usage will be low 2 GB / 16 GB until 10-12 minutes go by then it shoots up 11 GB / 16 GB. It's really odd and I can't explain it, since no applications are started.

I took it upon myself and downloaded RamMap. Using RamMap I was able to determine that the memory is caused by "mapped files" under "file summary" I can see the two large files which are to blame. But I'm not able delete these currently until tomorrow to confirm the user doesn't need them.

What I'm looking for is an answer as to why these files seem to be singled out? Thanks in advance. I've included a screenshot to the RamMap findings and my understanding with how memory is handled is limited.

EDIT - I can see now only 1 large file is being selected for "mapped file".

A:Windows 7 Large files stuck in "mapped files" / "stand-by"

Attachments -

1 more replies
Answer Match 105%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Answer Match 105%

Hello, TSG!

Just yesterday I was using the computer normally until I got a Blue Screen. Getting a blue screen is usually something normal that occurs to my every so often, so I didn't mind it and rebooted the computer normally. However, I got two more blue screens within the next hour. The 3rd time rebooting, my computer starts to act strange as if it had a virus. Upon powering up the monitor would just display a black screen with two lines about something --- which I don't remember, sorry --- and stayed like that unless I plugged out the power cord or held on the power button to shut down. Then when after a few tries it boots and displays a message "Floppy Disk Failure" and "Drive 1 not found: Serial ATA, SATA-1" (and the same message for Drives 2 and 3) show up. Also it asks me to continue loading by pressing the F1 Key.

When Windows loads the first time, it displays a message saying a bunch of hardware has just been installed and ready for use. Also, my internal clock resetted itself back to Monday, November 07, 2005 (Which, if I recall, is the date when I got the computer) and my speakers do not work.

TL;DR Version
3 blue screens within a short time
Floppy disk fail
Drivers 1-3 not found: Serial ATA, SATA-1-3

Anyway, I browsed through Google but I haven't seen anyone with both problems. I disabled my Floppy Disk Drive and that message doesn't show up anymore, but the others do and my computer still isn't fixed. I ran a vir... Read more

A:Solved: "Floppy Disk Failure" and "Drive 1 not found" problem

9 more replies
Answer Match 104.7%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Answer Match 104.4%

Whenever my computer tries to boot, it takes a while to detect anything from the CD-ROM (my first boot priority), and then when it detects the IDE, it says "error loading operating system" and after that I can't do anything but restart or shut down. I am running Windows XP Professional and it will load with a boot disk, but if I take out the boot disk it won't load. I'm not sure what to do, so please help me!
 

A:Solved: "error loading operating system" message when I try to boot

hi there, im sorry this isnt a solution. but i am having the same problem.

my old hard drive kicked the bucket and i got a new one. i cloned the hard drive using TrueImage which went fine. but when i restart the comp i get that error. i have tried to change the bios access mode to Large LBA and the other one but to no avail. i have herd that running the command fdisk /mbr may help but it could also cause problems.

does anyone know how to get past this?

also reinstalling xp doesnt work. i have formated the hard drive and tried to set up windows but to no avail

Thanks Lee
 

3 more replies
Answer Match 104.4%

Hello all,

I recently put together a brand new SB51G system I got from Ajump. Here are the specs:

-P4 2.4, 533fsb
-512 2700 ddr kingston ram
-WD Caviar 40gig, Seagate 40 gig
-Sony 510a DVD+-RW drive
-NEC lcd monitor
-Otherwise running onboard everything (video, audio)

Installed the cpu just fine, all the wires, and made the CDRom the first boot device and when I booted up (with a WinXP cd), I got the message: "Error loading OS". I've deleted the floppy, hd's from the startup in bios, and even made the CDRom all three startup items. Bios recognizes everything, HDs are displayed normally, however for the secondary master (my CDRom), there is only an "S", and some weird character next to a lower case 'h' highlighted with a bar of red near the bottom of the blue bios screen. Other than that, the CDRom spins, opens, closes, etc. Got any insight on this? Any help at all would be greatly appreciated, I'm stumped.......
 

More replies
Answer Match 104.4%

every time i try to open one of this folders a window apears with this content
cant have acces to C:\Documents and Settings\Mike\Local Configuration\{one of these folders} acces denied
this affects my IE i cant download nothing thru IE all my files on that locations i cant set dispaly pictures on WINDOWS LIVE messenger and all thinks that has anything to do with those folders
any suggsestions or idea
hope you can help me
pd ive scanned my computer and its all clean also i cant install windows XP serivce pack 2 im kinda stucked :/
 

A:cant open "temprorary files" "aplication data" "program data"

11 more replies
Answer Match 104.4%

windows update error "WindowsUpdate_80070BC9" "WindowsUpdate_dt000"
I am using windows 7 64 bit
I cannot install any important updates and haven't been since 8/2010
 

A:windows update error "WindowsUpdate_80070BC9" "WindowsUpdate_dt000"

These links from Microsoft Support will help you up....
Link 1
Link 2

PLZ go through these support links and do reply if the problem is solved......
 

1 more replies
Answer Match 104.4%

Hi all,

I'm puzzling this one. In the folder options when I choose 'view' the radio button to show the hidden files is missing. I've already checked the registry at the HKLM/Software/Microsoft/Windows/CurrentVersion/Explorer/Advanced/Hidden

and everything seems ok (value for 'Type' is 'group' etc.). Using the XP tweak (Kelly's corner #155) shows the hidden files, but the button still missing.

Another thing that I encountered with was that from the start menu the "Help and Support" not working. Again, the registry seems fine, and the process is activated (started). This came up when I tried to use system restore option - with no success.

Virus scan didn't find alerts of any kind

To make a long story short- below is the log file of HiJackThis. Please review it and reply if you see something to be concerned with for repairing my computer.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 14:36:54, on 21-Dec-08
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16762)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Network Associates\Common Framework\FrameworkService.exe
C:\Program Files\McAf... Read more

A:missing "show hidden files" button + "Help and Support" not working from start menu

Ok I found the answer (after quite a lot searching), as follows:

1. for the 'Hidden files' radio button - I used methods 1 and 2 from here-
http://www.technize.com/2007/05/13/s...s-not-working/

2. for the helpcenter I just reinstalled it as described here -
http://windowsxp.mvps.org/rebuildhelp.htm
note that the file 'dataspec.xml' is needed to be available for this, and it can't be done directly from the XP CD. The thing that worked for me was to insert the XP CD, and use the file that in my computer (C:\) and afterwards another file on the CD.

Again, all this happened with no virus detection, so I believe that there is no infection. However, if someone has remarks on the HiJackThis log I've put, feel free to add them.

Have a nice day,

Fitch.

1 more replies
Answer Match 104.1%

"Appcrash", and "General Fault" when loading various warez. I have been getting these often. Some adobe software. Older games like Diablo II. The list goes on and on, I just don't remember which software.

More replies
Answer Match 104.1%

Good Morning,

I would like to introduce myself. I am new to the forum. Should I address an issue inappropriately, kindly alert me.

Most recently, I have experienced multiple PC issues. Recently, I performed a System Recovery and encountered the following ?

1. Cannot perform a SYSTEM RESTORE. The message is: ?Restoration Incomplete. Your computer cannot be restored."

2. When I booted up this morning, and DID NOT HAVE A DESKTOP.
The screen was blank ? no Icons.

3. The items below are APPEARING IN MY TEMP FOLDER, and are located at: C:\DOCUME~1\COMPAQ~1\LOCALS~1\Temp:

........a. 415303181927525125.tmp
......... plus similar numbers.

........b. IswTmp
........c. msohtmlclip1
........d. msohtmlclip

I delete the above items through safe mode but they re-appear.
** I am MOST CONCERNED ABOUT Items 1 & 2.

SYSTEM SPECIFICATION:

? (DESKTOP PC) Windows XP
? (SP3) HP Compaq Presario 061 - Media Center Edition,
? AMD Athlon (m) 64 Processor / (X 86-Based PC - 32-bit package)
? MOTHERBOARD Chipset - ATI RADEON XPRESS 200 CHIPSET
? Version 5.1 / 2600 Build Processor

** If someone would give me some feedback, I would appreciate it tremendously.
** THANKS IN ADVANCE.

Kind regards,
AJ

A:NO DESKTOP after booting up & SYSTEM RESTORE "Incomplete" & "Strange" Temp Files

Usually when the machine has a "blank" desktop, the boot/startup process has been interupted or is frozen to before Explorer is launched.

You can launch Explorer manually be navigating C:\Windows and double-clicking "Explorer".

If successful, do the following:

Start>Run>(type) "msconfig" and turn off all non-MS services and all startups.

Then, Start>Run>(type) "cmd", and at the command prompt type "chkdsk /f" and schedule a chkdsk to run on next reboot.

Reboot system and report results.

3 more replies
Answer Match 103.8%

Hi guys. I'm new here. I've tried to read all the discussion about how to fix the unallocated hard drive but I just can't understand it as the cases were pretty much different than I'm facing of.

Here's my problem.
Yesterday my external hard drive seems normal, everything is fine, until there's a blackout and I have to put "sleep" to my laptop. After the power got back, the hard drive suddenly gone and when I check the list of drives under "Disk Management", it showed up as "Disk 1 - Unallocated".

(I've attached screenshots here for your viewing)

My external hard drive is WD My Passport 1TB. It contains a lot of valuable data I cannot afford to lose. I really hope there's a way to fix this, and once I get back all of those precious data I will buy another HD to transfer them ASAP because I cant let this happen to me again.

Your help is so, very much appreciated.
Any questions regarding my problem, let me know. I'll provide all of the details you guys need.

NOTE
1) I've tried TestDisk but on the "Analyse" process, it says "read error"
2) I've changed cable, but the situation remains the same.
3) I've tried Recuva, but it doesnt recognize my external drive.

A:WD EXTERNAL HARD DISK 1TB suddenly "unallocated" and "not initialized"

Hi!

First don't mess up with the WD drive settings.. download partition wizard 7 (its free)..then .. open it ..click wizard(menu) .. select partition recovery wizard.. and it will find the partitions on it i think.. that way you can recover your partition that has been lost.

9 more replies
Answer Match 103.8%

I have four external drives (FAT32) and opened Partition Magic a couple of days ago. It said one drive was "BAD". MS Disk Administrator says drive is "Healthy".

I am able to access this drive through Windows Explorer and do anything I want with the data. This appears to be a false reading by Partition Magic but I am not completely convinced of this because it has been such a good program for many years.

Do you think I have a failing drive?
 

A:Partition Magic says drive "BAD". Disk Administrator says "Healthy"

I wouldn't trust either program. Find out the manufacturer of the hard drive and download their hard drive diagnostics. The manufacturer's own tests should give you a much better idea if its in good shape or not.
 

2 more replies
Answer Match 103.8%

i want make a dvd disk for my compaq recovery, but it always shows "this is not a blank disk, please insert a blank dvd?". wut should i do to get a recovery dvd? (i have updated my drive, but nothing useful. i have tested my burner with nero, it works fine.)
 

A:"compaq Recovery Cd/dvd Creator"!!! why it always shows "this is not a blank disk"?

plz help!!!
 

1 more replies
Answer Match 103.8%

My hard drive not showing in "my computer" or "Disk Management" but is showing under device manager. I got the hard drive from a friend and his dad had put a Password encryption on it. Any Ideas?

More replies
Answer Match 103.8%

Hey folks,

My first post on here but I'm in serious trouble. I got a "new" (to me anyway) desktop running XP today and found the audio hardware wasn't working. So I pillaged an old machine for its sound card, and inserted that onto the motherboard. Also connected the Aux and CD lines to the top of the daughterboard.

Since then, to my horror, the machine has failed to boot. All plugged in, keyboard working, screen on and being used on another box for this very post. All I get now is the usual chirps from the internal soundcard followed by a few very low notes, definitely depressing so I guess they're suggesting something's failed. There's no further action from the CPU, the fan still works, but there is no screen output whatever.

Have I fried the motherboard without realising?!

Also, ironically, the last failure tone was delivered by my speakers through the originally non-responsive audio hardware!

I'd love a bit of help on this one, because my knowledge of computers' insidey bits is pretty poor.

Many thanks,

Joe.
 

A:Desktop boot problem after sound card "meddling"... just a "beep" failure tone.

6 more replies
Answer Match 103.5%

Ok, I built a PC a month ago and everything seemed find no problems of any sort. The other night I defragmented my hard drive and shut it down and turned it on today to a memory test and the message "Disk Boot Failure, Insert system Disk and press enter"

The computer has access to the XP pro w/ sp2 disk only as a boot device but it will not recognize it now.

I have set Cd-rom as 1st for boot sequence then hard drive I have no floppy drive and the bios has been configured to know that.

I am not sure if this means anything but in the bios the IDE Channel 0 Master says none and when I try to turn on auto detection it wont detect a hard drive.

The HDD is fully connected and has not been touched since I installed it a month ago.

I have this awful feeling that I fried the HDD when I defragmented it last night.

Any help would be very much appreciated. But please be simple this is my first build and my knowledge at this sort of thing is very very sketchy at best.
 

A:Error message "Disk Boot Failure, Insert system Disk and press enter" on first build

The first thing to do would be to get a new data cable for the herd drive and see if that fixes it, they are nice and cheap nowadays.
 

4 more replies
Answer Match 103.5%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Answer Match 103.5%

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

A:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

9 more replies
Answer Match 103.5%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Answer Match 103.5%

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

More replies
Answer Match 103.5%

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

6 more replies
Answer Match 103.2%

hi every body
My PC has lots of files called "Thumbs.db" & "System volume information" in all its drives.I cant delete these files and I think the cause of shutting my pc down automatically and showing blue screen is these files.the operating system is win xp/sp2.
I don't know what to do with these and what anti virus will delete them.please help me.
thanks
 

More replies
Answer Match 103.2%

Hello,

I've scanned my laptop with SFC four times in this past week, and each scan ended with the same failure to repair specific files. I'm uncertain how to proceed with these corrupted files.

I followed the instructions in the SFC /SCANNOW tutorial; I installed the System Update Readiness Tool (CheckSUR in attachments) after running SFC three times and it managed to find and fix some sort of error. However, the results seem to be the same in the new SFC scan logs.

I also tried obtaining a .iso of Windows 7 home premium from Microsoft's website (Access Denied) to run a repair install, but it will not accept my product key due to it being a pre-installation provided by Samsung.

I do not have a Windows 7 installation disc so I cannot manually replace them like the tutorial suggests.
Also, I don't know if this is relevant or not, but I ran the WindowsUpdateDiagnostic.diagcab troubleshooter several times as well (dism.txt is in attachments). Every single time it says that two problems were found:
1. Problems installing recent updates (Not fixed)
2. Service registration is missing or corrupt (Fixed)

Additionally, I've recently noticed that my free hard drive space has been decreasing rapidly. In the past two days, it has decreased by 2 or 3 GB, despite not downloading or installing anything. Is this related to my current problem with the corrupted files or something else? I don't know how to find what's eating up my storage space.

Any advice is appreciated,

Thanks.

More replies
Answer Match 103.2%

Computer infected with "Phoenix Toolkit Website 4" rootkit/trojan virus identified by both Norton Anti-Virus and Webroot SecureAnywhere. Although the computer is having no symptoms of spyware (besides the search engine highjacking that no longer occurs) messages of blocked threats continuously pop up from Norton Anti-Virus.

Windows 7 Ultimate
Intel i7 860 CPU
8.00 GB DDR3

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:01:58 AM, on 12/26/2011
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16421)
Boot mode: Normal
Running processes:
C:\Program Files (x86)\Norton AntiVirus\Engine\17.9.0.12\ccSvcHst.exe
C:\Program Files (x86)\Ralink\Common\RaUI.exe
C:\Program Files (x86)\iMesh Applications\MediaBar\Datamngr\datamngrUI.exe
C:\Program Files (x86)\LP\4919\93C.exe
C:\Program Files (x86)\Real\RealPlayer\Update\realsched.exe
C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe
C:\Program Files (x86)\73949\lvvm.exe
C:\Program Files (x86)\BitTorrent\BitTorrent.exe
C:\Program Files\Webroot\WRSA.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Norton AntiVirus\Engine\17.9.0.12\MCUI32.EXE
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Users\Zohair Razvi\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\2HOUF0NM\HijackThis.exe
R1 - HKCU\Software\Microsoft\... Read more

More replies
Answer Match 103.2%

I'm trying under "Windows Update" to click on "check for updates" however when I do that I get message
"windows update cannot currently check for updates, because updates on this computer are controlled by your system administrator"
I am the admin on the PC however this PC points to a In-office "WSUS server" to normally get its update
Is there a work around to this that I could add to my local group policy or registry?
I have been under Group Policy Object Editor -->Computer Configuration --> Administrative Templates -->
Windows Components --> Windows Update
but seen nothing that would allow to override this error
Any suggestion(s) would be most appreciated
JMurphNE

More replies
Answer Match 103.2%

Hey Friends,

I guess its not only me having this, is it? Many of us have it right? so whats the thing which brings up this dialog box > Scan and Fix /or/ Continue without scanning > when you connect an external device to your computer?
i had some time some bad day of mine when i clicked on the Scan and Fix and the result was the windows converted a very large number of my files into .CHK files hidden in the HDD!! and i still cannot find a way to recover those most most important files of mine (they are text files). I did recover a large bundle of files, but not the ones i actually needed more than anything! those text files. i have gone through literally 30,000 files and recovered almost everything > videos, movies, images, and messed up bits of large installation files of softwares like AE broken down to many many small pieces... but that doesnt matter! that stuff can be recovered (softwares and movies and songs) but the text files are still among those .CHK files i have which are still more than 10,000.

Anyone have anything regarding this is more than Welcome to share their Knowledge.
Thanks.

A:Windows "Scan and Fix Dialog Box" and ".CHK Files"

Sounds like checkdisk is running and finding a problem with a hard drive and attempting a repair

3 more replies
Answer Match 103.2%

Hi,
I recently installed a new ssd and did a fresh install of windows 8.1 on it. I am now using my old hdd as my main data drive in my laptop caddy. My problem is I did not back up my data on my hdd and format it. So I need to delete the "windows" , "program files" and "program files (x86) " folders from that hdd to free up some space.
I understand I have to give ownership to those folders for me to be able to do delete the folders. I have tired the methods suggested by this guide Take Ownership of a File, Folder, Drive, or Registry Key in Windows 8

I tried both of those commands





(To grant currently logged on user ownership of)

takeown /F "full path of folder or drive" /R /D Y


(To grant administrators group ownership of)

takeown /F "full path of folder or drive" /A /R /D Y





and it was succesful, however I still couldn't delete the folders. I would appreciate if anyone could enlighten me.

A:Cannot delete "windows" and "program files" from old hdd

A lot is protected by trusted installer. I do that kind of thing with a win7 winpe disc/usb. I have a special driver which ignores permissions and gives complete control.

2 more replies
Answer Match 103.2%

Hi,

I am running Windows 7, 64 bit.

This is the problem. When searching a folder, I am looking for all .cfg files. I can see at least 4 .cfg files in the folder, however, when I search *.cfg, it comes up with no results. I know this is not an error in Windows, and I feel as if I am overlooking something simple.

I see that .cfg files are tagged as "configuration" files and I assume Windows is trying to protect me. In reality, in this specific folder, these are broken files/un-completed download files from my download manager, Gigaget. I just want to remove these files in a specifc folder I have set up to house incoming downloads, so there's no risk of deleting anything important that my system would need.

Does anyone know how to rectify this dilemma.

Thanks in advance,
Chris
 

A:"Search" function in Windows 7 "not seeing" files

7 more replies
Answer Match 103.2%

just like the title says my HD crashed and i could not boot on the computer i put in a new HD and tried to boot it would not work. i would see the HP screen but then i would get the error. it is a 810a model and help would be extremely appreciated. and if you really know you can email me at <email removed>
 

A:Installed new HD now getting "disk boot error inset system disk & press enter"

14 more replies
Answer Match 102.9%

I have recently had to reinstall XP a couple of times and have deleted partitions/formatted the HDD in the process.

All was working fine but now when I boot up I get the following message: "Boot from CD".. then immediately "Error loading OS".

If I insert the CD recovery disk and boot up again, ignoring the message "press any key to boot from CD", everything is fine and XP continues to load as normal, with no loss of data etc.

Can anyone shed any light on what the problem might be? I really don't want to have to reinstall the OS again.

Many thanks

 

A:Solved: Help please! "Error loading OS" msg on boot up

When you re-installed XP did you allow it to complete?
After installation did you set the hdd as first boot option?
 

3 more replies
Answer Match 102.9%

I'm trying to do a fresh install of Windows 7 Ultimate 64bit but i can't get the installer to load.
I have access to a Xubuntu install and a OS X install.
The original hard drive Windows 7 was installed on stopped working completely. So, I've bought a brand new one.
I followed the steps I did the first time I installed Windows 7 - converting the iso to and img with OS X's hdiutil and the dd command to burn it to a USB.
This time I would just get a "please insert proper boot media" error.
I went to my Xubuntu computer (it's used like a chromebook - i'm not a big linux guy) and tried WinUSB.
These USB keys lead to a screen that had a flashing underscore a few spaces from the top of the screen.
It dawned on me that the first thing I did when I installed windows the first time was update the bios. So I tried flashing a few different BIOS versions, but none of them made a difference>
I really need help - I can't think of anything else to try
Thank you very much!
TL;DR
Cannot boot into Win7 installer. OS X made USB keys show "insert proper boot media" - Ubuntu made keys show "flashing underscore" - Tried 3 different BIOS versions. Win7 -has- worked here before...
*Intel Core i7-3770 Quad-Core Processor 3.5 GHz LGA 1155
Gigabyte GA-Z77X-UD5H Motherboard
Gigabyte GeForce GTX 650
Corsair 16GB (2 x 8GB) 240-Pin SDRAM DDR3
Corsair 750W*
 

A:Cannot boot into Win7 installer. "insert proper boot media" and "flashing underscore"

From where did you buy Windows 7 Ultimate? Did you not get a set of two DVDs with your purchase?
 

1 more replies
Answer Match 102.9%

Mods, if you feel that this thread is more of a "Windows" issue, please feel free to move this thread.

Here last year I did my second build because I was having "boot" issues. Wasn't certain what exactly the problem was at the time. But something some how screwed up the boot sequence in my system, and where everything was pretty much "outdated." I just went ahead and did another build.

Though, since then I've been pondering around with the thought of using a SATA to IDE adapter so that I can retrieve what ever salvageable data I can from one of the two HDD's that was in my last build. So I finally broke down and ordered a couple different one's earlier this week.

Unfortunately, I've been running in to some problem(s) when I try to launch with the IDE in place.

Upon initial launching, the boot sequence seem to take some time longer than it normally does with out the IDE HDD in place. Though after a 15-20sec lapse I'll get an error screen displaying an windows error code of "0xc000000e" with a prompt message below stating "The boot selection failed because a required device is inaccessible"

I searched all over online to see what that error code represents, only to get "pages after pages" of sites with each site telling me something different.

I have no intentions of using this as a third HDD in my system. I just want to retrieve select data from it.
 

A:Error code "0xc000000e" "The boot selection failed because a required device.........

16 more replies
Answer Match 102.9%

I just upgraded from Vista Home Premium to Win7 professional x64 hoping to fix the above mentioned problem. After a complete re-install Im getting the same errors.

Im not sure of the proper terminology here, but during startup the computer does a scan of all hardware and "Volume 0" has a "failed" message.

The odd thing is that sometimes after a few restarts and pointless boot menu visits the computer starts up fine.

I tried windows repair feature by booting from the disk, but when I get to the window where i select the operating system to repair, its empty. Drive C, where the operating system is, is not showing.

I have a feeling that the hard drive itself has gone bad and is very unstable. Please let me know if I'm missing something or we just need to get a new HD.

Thank you

A:Win7 pro startup error "Boot MGR missing"/"Operating System Not Found

What type of hdd do you have. For example if you have a Seagate drive, there is software you can run to do a diagonostic on the hdd before the operating system boots.
This would be a good idea, especially if you were having same issues when Vista Home Premium was installed first.

Do you have more than one hdd installed. If yes, make sure in BIOS settings, the proper drive is selected for First Boot. And better yet make sure its the only drive attached when booting.

9 more replies
Answer Match 102.9%

I am running Windows 10 Pro. My system is running perfectly. There are zero "Event viewer" errors on every restart.
I have never had a BSOD and everything works perfectly.........but, on every other restart I am seeing "System error memory dump files" in the Disk Clean-up utility. The size varies. Currently it is 9.70mb but may change slightly if I reboot.
Whenever I clean it, it returns. There are no dump files in my Windows folder. I really don't understand why I am seeing it.
I have searched the internet for hours but all threads turn to BSOD issues. I have never had a BSOD, nor can I find this mysterious 9.70mb dump file. Can anyone shed any light onto what is happening?
Thanks in advance.

More replies
Answer Match 102.9%

This problem started when I accidentally agreed to upgrade to Windows 10 which put that update in my queue. I subsequently cancelled the update but the upgrade remained. This was a problem for me because Windows 7 could not update itself while the Windows 10 update is in the queue and I have important third party software that won't let itself be installed on an un-updated computer. So I am stuck.

I called Microsoft and they were able to (after much time) get rid of the Windows 10 update. However they left me in a never-ending loop of "Restart your computer to install important updates" and my software still won't install. I spent another 2 days on the phone with Microsoft techs and they exhausted their tools and told me reinstalling Windows 7 was my only choice - trying to avoid that. I do have a restore point but it's back in May which is doable I guess but I've had bad luck with restore and am looking to solve this another way.

More details:
* Restarting from the prompt in Windows Update does nothing
* Clicking on check for updates tells me I have to restart first
* I have the original Windows disc that came with the computer, but it is a recovery DVD only and did not give me the option of repairing Windows Update.
* I ran scannow and SURT. Didn't work.
* I have not got any windows error codes
* The only update in my history is the KB947821 hotfix. Something the Microsoft techs did removed the other history
* I uploaded the SFC details file. The CBS... Read more

More replies
Answer Match 102.3%

Hello Sevenforums

Notebook: HP ProBook 4730s

OS: Windows 7 (x64 bit)

Did not buy from hp, bought from a guy.

Yesterday, my explorer got stuck so i had to restart the laptop by pressing the power button, i turned it on, and then, Startup repair appeared, i left it to complete and then i went to sleep.

The next day i woke up, i opened my laptop, and then "Windows is loading files" appeared and afterwards a black screen appears and it stays there forever.

I read many solutions but none of them seemed to work

Such as:

-Removing the battery and the AC adapter and then press power button for 40 seconds.

-Entering safe mode and doing a full recovery (I cannot access safe mode using F8)

I can only access the ESC which is the bios and these stuff.

If anyone can help, i would be grateful because ill probably pay $200 and up.

Im extremely sure that this problem happened because of AVG free antivirus that i installed, i installed the antivirus about 1 week ago, and i never restarted the pc until then, only putting it into sleep mode. But this time it got restarted with some strange things happening when it was restarting, and it mentioned some of the AVG files deleting stuff
I dont know im really in need of help!!

A:Stuck at black screen after "Windows is loading files"

Hello and welcome Majd have a read throughtis and see if there are any thngs you can use . Troubleshooting Windows 7 Failure to Boot

If you can get into safe mode at all get rid of the AVG - it is crap.

Did this bloke give you any recovery media ?? and usually factory installed machines have factory restore partitions so can you let us know exactly what model this machine is please - I know you have quoted a number but have good look underneath and look for yourself before we go any further .

9 more replies
Answer Match 102.3%

I have a laptop with Vista 32bit and recently I haven't been able to start it. I turn it on and it gets to the black and white "windows is loading files" bar and it just freezes and beeps at random points. The computer will continue beeping until I have to hold the power button down to shut it off. I've tried booting from a flash drive and it still gives me the same problem. Does anyone know whats wrong?

Thank you.

A:Computer freezes and beeps at "windows is loading files"

BIOS beeps - http://www.pchell.com/hardware/beepcodes.shtml

Run memtest86+ - http://www.techsupportforum.com/2789807-post8.html

Run HDD diagnostics - http://www.techsupportforum.com/2828431-post7.html

Regards. . .

jcgriff2

`

1 more replies
Answer Match 102.3%

I'm using laptop lenovo T430U, when doing system recovery process until half ways my laptop no battery then shut down. After that Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:

1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."

Can someone help me or tell me how to get it past the windows is loading files?

A:Stuck at "windows is loading files" when doing a system recovery

How do you know your battery caused it to shut down? Does it complete Recovery? Are you using disks or Lenovo One-Key Recovery? How do I recover my system using ThinkVantage Rescue and Recovery

Make sure you are on AC power and try again.

If Recovery won't run you can get a much better install doing a Clean Reinstall - Factory OEM Windows 7. Everything is provided in the blue link to get and keep a perfect install.

7 more replies
Answer Match 102.3%

I have an Acer Aspire 5750-6677. I3-2310m. It has been performing the startup repair for over a day. It's now, finally (I think), saying "windows is loading files". It has been doing this for HOURS! Can I simply turn it off and attempt a different method or will that make it worse? BTW: it came with zero discs of any kind when I purchased it new in July 2011. I appreciate any time you are able to give. This is my work comp too and I can't lose the info that's on it.

A:Startup repair info while "windows is loading files"

Work through these steps for Troubleshooting Windows 7 Failure to Boot which disinfect then attempt to repair system files to start Win7.

If these fail the steps work up to copying out your files to run Factory Recovery or Clean Reinstall - Factory OEM Windows 7.

8 more replies
Answer Match 102.3%

I just finished my first build yesterday and I can't install Vista premium 64 bit! It either freezes at the "Windows is loading files" screen or it gets past that and reboots? On a few occasions, it gets past this to the Windows Vista loading screen and then freezes there. Can anyone please help me?

My Specs are:
Mobo: Asrock X58 Extreme
CPU: Core i7 920
Memory: OCZ Gold 6gb (3) 2gb sticks
Video Card: Radeon 5870
PSU: CORSAIR CMPSU-850TX
Hard drive: Western Digital Caviar Black 750GB

A:Vista installation reboots after "Windows is loading files..."

Please have a look here http://forums.techarena.in/vista-set...ll/1035406.htm and herehttp://www.vistax64.com/vista-instal...ing-files.html make sure you try everything that is mentioned as any one of the reasons can cause this issue and therefore should not be overlooked.

6 more replies
Answer Match 102.3%

I cannot open User Accounts in Control Panel, I keep getting ...

Microsoft (R) HTML Application host has encountered a problem and needs to close.

Anyone with a fix? . My appreciations in advance!
 

A:"User Accounts" in Control panel wont Open-Error is "Html application Host Error"

Do you have a recovery restore install disc or partition?
You can try doing a repair or system file check...
Scan For Missing/Corrupt System Files...

Windows XP comes with a wonderful tool called System File Checker (SFC)
Itscans and verifies the versions of all protected system files after you restart your computer...
To Do This:
Click Start menu, and then click the Run icon.
In the small box that Opens, type the three letters: cmd then click the OK button.
In the command prompt window that just opened (a black background and white text), type the following command:
SFC /scannow
And then click OK
You must be logged on as a member of the Administrators group to run SFC..
You will need your Windows XP CD during this procedure if SFC needs to get an original file. Please remember that Windows XP can have multiple instances of a .DLL file and remember which version is for which program.
Notes....
I have been asked if it is possible to have a "progress meter" show when SFC runs... This is the registry hack you need. PLEASE do not go messing with your registry if you do NOT know what you are doing!
System Key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
Value Name: SFCShowProgress
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = disabled, 1 = enabled)
 

1 more replies
Answer Match 102.3%

Hi guys !!

Before hand pls. forgive my english not my first language, I'll try my best and thank you for any help and pls. forgive my ignorance at this respect

Ok my trouble is this, I tried to Add information to a CD-RW rewritable disc memorex 650MB-74 mins.
But it says its was full, well I try to right click on it and delete the file, but it didn't let me a error message appeared saying:

"Cannot delete the Files on this CD are read only. You can still copy new files to this writable CD, wich will replace files already on the disc "

Well so .... I try to do that "again" But NO GO !!!
I tried and it display a message saying that the discs is full again .

The capacity of the rewritable disc is of 650 MB, the new file to add it's about 200 MB and the existent file on disc is just 2.69 !!! so...? is not full at the capacity of the disc.
It says to insert a writable discs as well !!

Ok ...well ...so I tried to delete the file with a 3rth party app.

So I try to use NERO to delete the rewritable disc....
I place the disc.... select delete a cd/dvd rw disc.... then option of quick delete or full delete appears.... but, NERO doesn't even recognize it as a rewritable disc !!!
What do I'm missing here ?
Is there an application that can DELETE the data "files and folders" from a Rewritable disc?

same thing with Ashampoo ... cant delete the rewritable disc

I already tried this applications that claimed they can de... Read more

A:Solved: Can't delete CD-RW discs error "read only files""

16 more replies
Answer Match 102.3%

This is my first time being on these forums. If this is the wrong place to post about this, I apologize in advance.
Background on how this all started
vvvvvv
I have a hp pavilion dm4 laptop with windows 7 home premium OS. This laptop is about a year and 2 months old. Warranty has expired. 2 months ago, my laptop started making this loud fan noise. I checked the CPU's temperature through software and it was at 78 F (which i thought was normla). I decided to sit my laptop higher by stacking books underneath it. I dropped the laptop on accident because I was sweaty and nervous. The fan noise stopped. That caught my attention. Every time the fan became loud, my FPS for the games I was playing lowered. That made me mad and frustrated. I remembered once the laptop was tapped a little, the fan would stop and my performance would go back to normal. The tap eventually progressed into a light smack then to a hard smack. I smacked my laptop everytime this happened because of frustration (Im 15 and i do dumb things a lot). Last week, the fan just continued and would never stop. I didnt stop smacking it either.
Situation
vvv
So today, I tried to smack the laptop as little as i could and then my laptop froze. It stayed frozen for about 1 minute. Then I restarted my laptop. When it was rebooting, I saw a screen I have never encountered before; "Windows is Loading Files Screen". I waited patiently and the fan of my laptop continued to be loud. Then, for about a second and ... Read more

A:Startup repair after "Windows is Loading Files".Cant start safe mode

Welcome to the Forum.
It sound like the first problem is overheating. This can cause many more problems all by itself.
If it was my laptop I would take it apart and clean completely. I would also check the operation of the fan. (If in doubt replace the fan).
If you don't feel comfortable taking the laptop apart and cleaning I would take it to a shop.
You must not use the laptop until the cooling problem is solved.

3 more replies
Answer Match 102.3%

Would greatly appreciate some help trying to create a bootable system on my 16GB USB stick. Here's what I did:

In Diskpart:
clean to wipe the USB stick clean
create partition primary offset=32 align=32 to create a fresh partition starting at sector 64 (rather than 63)
active to make it bootable
Next, I formatted it as NTFS with a 32KB cluster size. I then used
bootsect /nt60 U: /mbr
(where U: is my USB stick) to write boot code compatible with Vista/7's bootmgr.

I extracted the contents of a known working WinPE .iso image to the USB stick which placed a bootmgr and Boot\BCD in its root.

After restarting my computer, USB stick (which is set to #1 in BIOS boot order) is briefly accessed but almost immediately the message Disk read error. Press Ctrl + Alt + Del to reboot appears.

Did I miss a step, or what did I do wrong? Could the partition offset or cluster size be the reason?

Please note, I want to do the process manually and don't want to use tools like the HP USB format tool or anything like that, because they'll invariably place the partition at sector 63 which I'm trying to avoid for performance reasons.

Thanks in advance!

A:Made bootable USB but getting "Disk read error" at boot time, why?

Try method two in this tutorial:
USB Windows 7 Installation Key Drive - Create

3 more replies