Tech Problem Aggregator

ProDesk 400 G2 Mini and Software Guard Extensions

Q: ProDesk 400 G2 Mini and Software Guard Extensions

Are there plans to add BIOS support for Intel's Software Guard Extensions (SGX) to the ProDesk 400 G2 Mini? This system is a 6th generation Core and has both vPro and SGX support.

More replies
Answer Match 110.4%

Are there plans to add BIOS support for Intel's Software Guard Extensions (SGX) to the ProDesk 400 G2 Mini? This system is a 6th generation Core and has both vPro and SGX support. 

More replies
Answer Match 71.4%

I have just bought a new old stock prodesk 400 g1 mini, just out of warranty. I have set the minimum fan speed in the bios, but it's still way too loud. Is this defective or is there a way of reducing the speed? All the system temps are low, so it could be slower.

More replies
Answer Match 70.56%

I want when the pc starts that the NumLock-key is on. I can't find in the BIOS the setting for this. The Prodesk 600 G1 desktop mini has this option in the BIOS. But the G2 has a new BIOS-layout. I can't find it.

A:Numlock on Prodesk 600 G2 desktop mini

Hello MatijsThere is no BIOS setting item for NumLock state on at boot in G2 series.You can change the NumLock state by modifying registry key if you would like to use NumLock on OS login screen.Please see the below URL for details.Read more at: http://www.tomcomknowshow.com/how-to-turn-num-lock-on-by-default-in-windows-7--8.htmlCopyright TomComKnowsHow. All Rights Reserved. 

3 more replies
Answer Match 70.56%

Hello, I recently bought a ProDesk 600 G2 Mini which I'm very happy with. However, I can't get the machine to boot from the M.2 NVMe SSD I've installed. There are no problems to use it as a second drive in Windows and also no problems installing Windows on it, but even though I can see it in BIOS and select it to boot from, I only get a "no bootable device" message. Is it possible that such a new machine that has a M.2 port, can't handle booting from a NVMe drive? HP doesn't have any information I can find on this issue, or can someone help me find it? Does anyone know? Best regards, Tommy

A:Booting a ProDesk 600 G2 Mini from a M.2 NVMe SSD?

Can't vouch for consumer class m.2 nvme drives, but HP fully supports HP Turbo Drive G1 (non-nvme) and G2 (nvme) M.2 SSD cards and are configurable as Hard Drive 1 on the Mini, which makes them bootable. It is possible that your SSD has not been properly setup as boot media?

8 more replies
Answer Match 69.72%

I have got several of these displaying the same problem. Despite the fact that the "after power loss" setting in the bios is set to "Power On", intermittently, some of these units don't, even if they are left "powered off" for several minutes. The problem I have is the pc itself is buried inside another unit and it's a pain to get to, to simply push the power button (which immediately boots the PC).I installed the latest bios update (2.09) - made no difference. Any ideas?  

More replies
Answer Match 69.72%

I have a ProDesk 400 G2 Desktop Mini with an i7-6700T which I am trying to get to work with Intel AMT. But I?m not completely sure if this works since there?s a Realtek NIC and not an Intel one.According to the manual there should be an option to configure Intel AMT in the BIOS, but it?s not there. Also there?s no ?Press <ctrl-p> to configure to enter MEBx setup? or similar after BIOS post.The BIOS shows the following information: System BIOS:          N23 Ver. 02.09 08/07/2016ME Firmware Version:  11.0.0.1205 I can?t seem to find information about what the hardware requirements for Intel AMT are, besides vPro. The PCU supports vPro, but I?m starting to think that the Realtek NIC isn?t compatible. Can someone please enlighten me?

More replies
Answer Match 69.72%

Im trying to install Ubuntu from a bootable usb into the ProDesk 600 G2 Mini. Legacy wont find the bootable disk. UEFI will let it boot into grub but any of the selections (Try ubuntu, Install ubuntu etc) prints out "efi: requested map not found" and "ESRT header is not in the memory map". What am i missing to be able to install a Linux OS onto the machine ?

More replies
Answer Match 68.88%

Hello,I am trying to find the specs for the power adapter for a HP Prodesk/Elitedesk Mini 400/600/800 G1. The part number is L2X04AA#ABA. I found the HP data sheet but that has very little information.I am looking for output voltage and tip dimensions.I am hoping that I can reuse the power adapter from the older HP DC7800 usff PCs but I can determine that only if I find the specs. Anyone out there who can dig up some specs for the HP Desktop Mini Adapter Kit (L2X04AA#ABA). ?

More replies
Answer Match 68.88%

Hello,I am trying to find the specs for the power adapter for a HP Prodesk/Elitedesk Mini 400/600/800 G1. The part number is L2X04AA#ABA. I found the HP data sheet but that has very little information.I am looking for output voltage and tip dimensions.I am hoping that I can reuse the power adapter from the older HP DC7800 usff PCs but I can determine that only if I find the specs. Anyone out there who can dig up some specs for the HP Desktop Mini Adapter Kit (L2X04AA#ABA). ?

More replies
Answer Match 57.54%

I recently had cause to re-install Win10 on my notebook, and it told me that Intel Software Guard Extension Platform Software would be deleted and would need to be re-installed.After the Win10 re-installation I went to the download site for th Intel package, downloaded it, and unzipped it.When I attempted to run the execution file, I got a warning asking me if I really wished to proceed. Knowing nothing about this package, I was unsure about what I should do. Is there anything I should know before I tell it to proceed?

More replies
Answer Match 53.76%

is there such thing as HDD guard?

a FREE software that lock the HDD while others are using the pc...they could enter the programs in the desktop but could not access the Local C and Local D if it has a partition...
 

A:Need software HDD guard

Uhm.. The programs reside on C: and therefore anyone wanting to run the programs needs to be able to access C: or at least a part of it.

Or are you just interested in making the browsing of the filesystem a bit less obvous so a casual user can't go and poke around ust like that?
 

8 more replies
Answer Match 52.92%

program that does everything and has NO ISSUES with windows 7 .... i had avenquest utilities 8 which was great with xp...... then i went to utilities 10 .... IT STINKS...... HOW ABOUT SUPER ANTI MALWARE SORTWARE... IS IT GOOD......love johnny g

A:??? best > Anti > Fix > Clean up > Guard > Software

I'm using Microsoft Security Essentials and have no problems to date, and it's free also. http://www.microsoft.com/Security_Essentials/

2 more replies
Answer Match 52.08%

Dear users,

We've just released new version of software called Anti-AD Guard.

Short description:
Anti-AD Guard is a powerful program that filters and blocks commercial banners from being loaded by browsers. The multistage defense system guarantees practically complete filtration of advertisements. The super powerful heuristic analyzer allows blocking even the new formats of advertisements without updating the program.

It will be interesting to know your opinion about this program and read your suggestions.

You can download 14-days trial here: http://www.pcguardsoft.com/download.html

Thank you in advance for your help and understanding.

Alex.
 

More replies
Answer Match 51.66%

How does Ablock Plus, UBlock, and other adblock extensions/software work? And how can they blocked all ads display on the websites? And It would be helpful if you guys can post a picture or something that will illustrate it.
 

A:How does Ablock Plus, UBlock, and other adblock extensions/software work?

How it works:

Adblock Plus
uBlock





Good luck.
 

1 more replies
Answer Match 47.46%

Hey folks,

So many devices these days come with a driver on a mini-CD. My laptops (Acer and Toshiba) take forever to access them, then think they're blank and ask to format them.

In Googling this I found a guy who said he fixed this problem by reinstalling Roxio. Said his computer came with it but he'd uninstalled it cause he never used it. That it must "turn on" a feature in W7 or something, cause after he reinstalled it, his computer could read mini's.

When I got both my laptops I wiped all partitions (including the hidden "recovery" one), re-partitioned the way I wanted, and reloaded all drivers and W7 (64 Ultimate). The DVD players in both laptops have a central spindle, so they are designed to read mini-CDs. They DO detect them, but again, think they are blank.

Anyone heard of Roxio or other software being required to read mini's? Thanks much.

PS I have a lot of media software installed but not Roxio. (Nero, ImageBurn, Handbrake, Ashampoo, etc.)

A:Is Media Software Required to Read Mini-CDs?

Windows should be able to read your mini-CDs . You might want to eject the CD and place it in the middle . It will take a few seconds to read the disc due to it size. I never had an issue with mini-CDs being read.

9 more replies
Answer Match 47.46%

I just powered this new monitor out of the box.   All is working fine, but I want to load the latest driver software into my Mac   to get all the flexibiliity available.    The HP support website did not have a listing for these drivers and suggested I try the forum for where to find them,  assuming they are available.  So here I am.  Thanks in advance for your help.Dan_the_Man_67

More replies
Answer Match 47.46%

Looking to replace my old Iomega Zip Drive with a much smaller and quieter, and larger storage capacity Iomega Mini USB Drive. Currently, have Iomega Sync automatic backup software which came with the Zip Drive. Iomega pre-sales support who I contacted says their Iomega Sync software should work with their Mini USB Drive, but they have not tested it. From experience, does anyone really know if this will work?
 

More replies
Answer Match 47.04%

Some people want their Start Menu back. Although I love the new Start Screen and tiles, there are times when I am on the Desktop that I wish I could launch a regular Windows application. Instead of having a bunch of icons on my Desktop, a menu would be better.

I don't like installing additional software, like the Start Menu 'restorers', so I tried to figure out a way to do it without installing anything.

So, here's a way to fake the Start Menu by using the built-in Taskbar functions. It's not as pretty and complex as the Start Menu, but it's sure better than having a bunch of icons on your Desktop or spread across the Taskbar.

A:Make a Mini Start Menu With No Additional Software

If you like, here's another Start Menu toolbar option.

Start Menu Toolbar - Create on Windows 8 Taskbar

3 more replies
Answer Match 47.04%

Hi.

I upgraded my Click Mini to Windows 10 as soon as I got it yesterday.

All appeared well until I restarted it and it would not boot, reporting there was a drive problem.

Eventually, after using the keylogger to unlock the drive, I reset the machine (asking it to keep my files and it has reinstalled Windows 10 but I seem to have lost the Toshiba programs that were on there.

They don't appear in the program list.

Is there a way of getting them back without reverting the unit back to Windows 8.1 in Recovery and then putting Win 10 back on.
Took hours.

Thanks for any help.
Doug

A:Satellite Click Mini L9W-B - Lost software after Win 10 upgrade

If you have ticked the option “Keep my Files” the Windows 10 would still remove apps and settings but it keeps your personal files like pictures, mp3, movies, docs, etc.

Please check this:
Limitations on Windows 10 Upgrade
http://win10upgrade.toshiba.com/swup...on=TEG&lang=en

and here you would find Toshiba Windows 10 Upgrade Information
http://win10upgrade.toshiba.com/swup...on=TEG&lang=en

11 more replies
Answer Match 46.62%

I am running Windows 7 Home Premium 64-bit
I have tried to install the Mini Partition Wizard of the Home Edition developed by MT Solution LTD

The download completed, when trying to install it in either the Program Files path and also on the Progran Files (x86) I get the same frustrating result in both.
The download came from a reputable webpage Free Partition Magic alternative. Free Partition Manager Software for Windows 7/VISTA/XP/2000 and Windows Server 2003/2008/2000.

It says the the Wizard has stopped working it never opens to show my disks details
The message i get in the details is attached as follows:

QUOTE
Problem Event Name: APPCRASH
Application Name: PartitionWizard.exe
Application Version: 7.0.0.1
Application Timestamp: 4e60e518
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7600.16385
Fault Module Timestamp: 4a5bdb3b
Exception Code: c0000094
Exception Offset: 00064fcb
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 4105
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
UNQUOTE

Was that a Windows 7 originated message or a MT Solution Mini partition originated message?

Then it also says this:
QUOTE
Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our priv... Read more

A:Windows refuses to install/run Mini Partition Wizard software ...

You'd do better to create a bootable CD rather than install and run Partition Wizard from your hard drive.

With a bootable disc, you can create and edit partitions without hindrance as you'll be booting into Partition Wizard rather than Windows.

Partition Wizard Bootable CD allows user to boot computer directly to manage partition.

5 more replies
Answer Match 46.2%

  
Quote: Originally Posted by Chromium Blog


These last few days, it seems that the extensions team has developed a newfound love for the F5 key. We all keep refreshing the "Most recent" page of our new gallery, obsessively checking the newest amazing extensions that developers have uploaded. Today, we get to share this nervous tic with millions of Google Chrome's users. We're launching extensions in the beta channel for Windows and Linux (Mac is in progress). We're also opening our gallery, which, as of now, contains more than 300 extensions!


Read the rest here.

Get Google Chrome Extensions here.

A:Extensions beta launched, with over 300 extensions!

I'm extremely bored right now so here is a small list of extensions I think are worth trying.


IE TabDisplay web pages using IE in a tab

Flash BlockerAutomatically block Flash animations from getting in your way. 1 click to play, or to add a website to a list of approved hosts

Google Mail CheckerDisplays the number of unread messages in your Google Mail inbox. You can also click the button to open your inbox.

Chrome.FMWith Chrome.fm you can listen to your favorite Last.fm stations right in your Chrome Browser.
It adds a nice little Icon to the Browser Window where you can *play*, *stop*, *love*, *hate* songs, just like you can at Last.fm.

AdThwartBlocks ads on websites. Includes the EasyList ad filter list as of 8 Dec 2009.

4 more replies
Answer Match 43.26%

Second hardisk to HP ProDesk 600 G1 SFF.There is a bay and SATA connectors to install another hardisk to the frame.Still the bay is not standard and some kind of rails are needed.The rails are missing from the packetMy customer needs those for at least three computers. How to get them ?I find no way to send email to our local dealer.

A:HP ProDesk 600 G1 SFF

Hi mistofeles, Welcome to the HP Forums! I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271 I hope this helps! Regards 

3 more replies
Answer Match 43.26%

Hi,
 
i have big problems with HP prodesk 600 g2 machines.
They dont read hdd, hp pushed new bios that correct that, error its still there.
After few days pc dont recognize hdd.
We have more than 50 of this machines and its a big problem for us.
If anyone have some info please post here,
 
thanks
 
 
Also, u cant isntall new os from cd or usb stick, when instalation get to the point where u chose language it freezes, its verry frustrating,
 
thx in advance.










Solved!
View Solution.

A:HP Prodesk 600 G2

the new Intel Skylake processors have architectural changes to the way USB is supported and the new implementation is not supported in Windows 7 NOTE: ISO creation software and DVD burning capability are required to complete this process.Create an ISO image file from a Windows 7 OS DVDa. Insert the Windows 7 DVD into the DVD drive.b. Open the ISO creation software.c. Create an ISO image file from the Windows OS DVD.Create a temp' folder on the HDD and copy all the files from the Windows 7 image to the folderEg. c:\tempCreate a folder called wim' under c:\E.g. c:\wimCopy the install.wim and boot.wim files, located in the c:\temp\source\ folder, to c:\wim.Download and install the Windows Automated Installation Kit for your specific OS versionWindows 7:Windows Automated Installation KitStart the AIK Deployment Tools Command Prompt with administrator rights:a. Search for "Deployment and Imaging Tools Environment" in the Start Menu.b. Right-click and select Run as administrator.From the command prompt, change the location to c:\wim, Command:cd c:\wimCreate a directory under C:\wim called "mount", Command:c:\wim>mkdir mountMount the WIM image with write permissions, Commands:For 32-bit OS:c:\wim> imagex /mountrw install.wim 5 c:\wim\mountFor 64-bit OS:c:\wim> imagex /mountrw install.wim 4 c:\wim\mountAdd USB3.0 drivers to the install.wim image, Commands:For 32-bit OS:c:\wim>cd c:\usb3\x86c:\USB3\x86>dism /image:C:\wim\mount /add-driver /driver:c:\USB3\x86 /recur... Read more

8 more replies
Answer Match 43.26%

hello, i own a hp prodesk 600 g2 sff, i want to connect 4 Screen and all of them will be just duplicates. I need to locate them around my place and each will have its own keyboard and mouse.  Pc will be used only one person everytime. Therefore, it just has to be duplicates. is it possible to just connect 4 screens and keyboard and mouses at the same time? thank you, have a nice day, 

More replies
Answer Match 43.26%

Hello HP Users! Hoping someone can help with what i would have thought was a rather simply question however Google has failed me.  I need to know what kind of PSU is in the HP Prodesk 400 G2 SFF. The information i have so far found through HP and Google is that it cost $280 for a 240W PSU or HP uses annoying parts that are almost impossible to replace / upgrade.  Reason is i need to upgrade the PSU as it is not powerful enough to both power the computer and a simple 128MB DMS-59 Video Card. I know right! Previously i had a 3 moniter set up on my work PC. However due to a small change in roles i have had some software installed on my PC (Cisco Soft Phone) that seems to have stop my previous 2 montier working that were working via VGA to USB j5create.  As such i saw that it had a display port on the back, so bought a VGA to dP converter and connected one moniter via VGA and the second via dP however this just resulted in Duplicate Display and Windows would not detect the second screen, and display the same on both.  I couldnt find anything in the BIOS that seemed to disable this, as it appears HP BIOS automatically allows Dual Displays.  Therefore i brought a ATI Radeion HD 3400 128MB DMS-59 PCI-e GFX card, however turns out that the little 240W unit in the PC (OMG I didnt even know they made them this small for PC's :/) is not enough to power both the Computer and the GFX card, ergo need to move up to something a litt... Read more

More replies
Answer Match 42.84%

Can I get a PCI LAN card for prodesk HP pc? because I cannot get for the PCI not suitable for the on

More replies
Answer Match 42.84%

It used to be so easy.  Go into the BIOS, select 'Num Lock on' and restart.  Simple.  Now that option has been removed from the BIOS of this brand new Prodesk 400 G3.  Why?  Who knows.  I'm hoping that someone out there will be able to help me out, though. I just want the Num Lock to come on automatically when I restart the machine.

More replies
Answer Match 42.84%

What is the problem with the prodesk 400 motherboard?
921- Front USB1 not connected
512- Rear chassis fan not detected
I changed about five motherboards with that same message.  I disabled post errors and still have this disturbing message.
Can someone tell me what is wrong with that models  (Prodesk 400 G1, G2 and G3) and how to disable post error messages

More replies
Answer Match 42.84%

Hi,I'm looking to purchase a HP ProDesk 600 G1 and replace the HDD with a SSD.My question is how can I install Windows 7 on the SSD? Does HP supply a Windows 7 OEM product key which I can use with an Windows 7 ISO downloaded from Microsoft? Any suggestions welcome.John

A:HP ProDesk 600 G1 upgrade to SSD

John, HP doesn't appear to supply a Windows 7 OEM product key for you to use with a Windows 7 ISO. Provided you are purchasing a configuration with downgrade rights, HP will typically pre-install Windows 8 and provide a set of Windows 7 "HP Recovery Discs" or will pre-install Windows 7 and provide a set of Windows 8 discs. Exactly what you get depends on the ordering configuration you select. In either case, there will be no visible product key on the computer due to changes in the Microsoft licensing requirements. As of the introduction of Windows 8, the Windows product key is encypted and embedded in the BIOS. Please see the following HP Forum threads for infomation and possible solution related to your question; HP Windows 8 downgrade to Win 7 HP 8300 SFF - No Win 7 OEM sticker.Downgrade from Win 8 to 7, where's my key?HP Pro 3500 - Why Windows 8 Restore CDs?windows product keysHP Pro 3500 windows 8 upgrade If you have any further questions, please don't hesitate to ask. Please click the white KUDOS star to show your appreciation

5 more replies
Answer Match 42.84%

I have recently issued an office desktop unit, and it was on a FreeDOS OS.I have tried to install windows 7, Windows 8, Ubuntu 16 and Ubuntu 14.  A lot of the devices are not working specially the USD ports, Only one of the USB 2.0 port is working for my kb/mouse the rest cannot detect any device attached to the rest of the USB Port (2.0 and 3.) I have tried to plug device  (Usb Drive, Kb, mouse, External HD, Flash Drive, Speaker) and none did work. I have tried to download drivers but it seems Linux/Ubuntu are not supported. (Units were purchased in Dammam, Saudi Arabia) Any help and ideas will be appreciated.

A:USB Driver for HP PRODESK 400 G3

Hi Please find the link given below to download the driver. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7638327&swItemId=vc_153768_1&swEnvOid=415...

1 more replies
Answer Match 42.84%

This is the situation:I have a HP ProDesk 600 G1 TWR with upgraded to Win 10 Pro. By some software limitations, we need downgrade to Win 7 Pro. There is the HP Recovery partition but F11 is not working, I guess because for some reason the HDD turned to Dynamic. Now, like a miracle, I found the DVD kit from the PC, well, I'm not complete sure if belong to this concretely workstation, but is from HP for the same model.  The question: what about the license? I believe this is a OEM license and I don't have the key. Can I use the Win 7 Pro DVD for recovery the PC? How is the activation process in this case?Of course, if is possible just use the recovery partition, will be great.Thanks in advance!

A:Restore ProDesk to Win 7 Pro

Hi: You should be able to use the recovery disks to install W7 without a key. This forum member just did the same thing with a similar business desktop. His situation was that he installed a solid state drive. http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Install-new-SSD-with-a-fresh-ins...

3 more replies
Answer Match 42.84%

We have 50 pcs of HP ProDesk 600 G2 SFF and we need to install Windows 7.I can't boot from usb or DV. Please can someone advice me on what to do? Thanks.

A:HP ProDesk 600 G2 SFF can't boot from USB or DVD

Hi: You have to go into the BIOS, enable legacy mode and disable secure boot in order to install W7. Then you also need to run this tool to put the USB3 drivers into your W7 usb flash drive.  https://downloadcenter.intel.com/download/25476/Windows-7-USB-3-0-Creator-Utility

1 more replies
Answer Match 42.84%

I load windows 7 32 bit in HP Prodesh 400 G3 MT but usb not working

A:use not working in HP prodesk 400 G3 MT in win 7 32 bit

Hi: Did you install the USB3 driver? Download, unzip and run the setup.exe file from the link below... https://downloadcenter.intel.com/download/22824/USB-3-0-Driver-Intel-USB-3-0-eXtensible-Host-Control...

1 more replies
Answer Match 42.42%

My ProDesk 400 G2 is 5 months out of guarantee and the on/off switch has been a little tricky to get on recently.  This morning it would not switch on, but when I tried this afternoon it did come on.  How do I get a new one or get it repaired?  Customer support only seems to work under guarantee.  I can pick up emails on another device.  Bluetit

A:on/off switch faulty on HP ProDesk 400 G2

HI you can check with nearset HP support center for this issue,You can also try log your complaint in trade

2 more replies
Answer Match 42.42%

hello to everyone,  ? have a problem, established system windows 8, ? can not intall windows7 . Please tell me bios settings? Thanks.

A:hp prodesk 400 g1 mt windows 7 installation about

Hi: You have to enable legacy mode in the BIOS and disable secure boot. I do not know where those settings are in your model. Here is a general article on the subject. http://support.hp.com/us-en/document/c03659945

2 more replies
Answer Match 42.42%

Hi, I installed Windows 7 x64 on a Prodesk 600 G2 SFF and the DisplayPorts are not working. VGA does work. I installed the Intel Graphics drivers from HP web site. Any ideas ?

More replies
Answer Match 42.42%

Can I use a W7 32-bit on a HP ProDesk 400 G3 - SFF - 1 x Core i5 6500 / 3.2 G (HP / T4R71ET#ABZ)?













Solved!

View Solution.

A:W7 32-bit on HP ProDesk 400 G3 - SFF - 1 x Core i5 6500 / 3....

Hi: HP does support that model for W7 32 bit... http://support.hp.com/us-en/drivers/selfservice/hp-prodesk-400-g3-small-form-factor-pc/8354586 You will have to use a PS/2 mouse and keyboard to install W7 or use the Intel USB creator tool below to install W7. https://downloadcenter.intel.com/download/25476/Windows-7-USB-3-0-Creator-Utility

2 more replies
Answer Match 42.42%

I failed to install a PCI Lan Card, it seems that it can not be detected, and I found some posts here that upgrading bios might help. Does anyone know if bios has to be upgraded from v02.65 to 00.02.68 for the PCI slots to work ? Is there other known issue on v02.65 ? We really need to install dual Lan cards and have 2 isolated network with our desktop.  Please help. Million thanks. 

More replies
Answer Match 42.42%

After give shutdown command HP prodesk 600 G2 MT machine shut. But after 1 minite it will restart automatically. This happning 7 PC's

A:After shutdown HP prodesk 600 G2 MT restart

THis will come in handy:http://support.hp.com/us-en/document/c01853741 Update BIOS on the units, which should resolve the issue. If it dosnt then restore the PC to previous restore point whee the issue was not occuring.http://support.hp.com/us-en/document/c00007682http://support.hp.com/us-en/document/c03327545

2 more replies
Answer Match 42.42%

Hello, we have two identical desktops HP ProDesk 600 G1 SFF running Windows 10 (64 Bit) with the most recent Windows updates installed. On both of them today I have installed the HP Support Assistant. The version info of the Support Assistant says: HP Support Assistant: 8.3.27.17Framework: 12.5.26.37Configuration files: 8.0.6294.2155Contact information: 37386108 All updates for the Support Assistant software have been installed on both machines. While on one of the desktops the Support Assistant works fine and could download and install the  available updates on the other machine the update process stops before downloading the updates with the following screen:Several uninstall/reinstall cycles (with reboots after each step) did not help to remedy this issue.Any advice would be greatly appreciated. KInd regards, Hans-Georg

More replies
Answer Match 42.42%

Hello all, is it possible to create RAID1 on HP ProDesk 600 G2 ? I need it because of failover data protection. Thank you.

A:HP ProDesk 600 G2 RAID support

Hi: There are references to setting UP RAID in this document... http://h20566.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=7633310&docId=emr_na-c04947557&docLocale...

1 more replies
Answer Match 42.42%

Hello, Does anyone know if there is an option in the BIOS / UEFI settings to turn on LAN / WLAN switching?

More replies
Answer Match 42.42%

I have a problem with HP prodesk 400 g2 an the BiosConfigUtility64 ( BCU ).
If the programm is was started with the option /get: it seams that all wroks fine :
 
C:\Program Files (x86)\Hewlett-Packard\BIOS Configuration Utility>BiosConfigUtility64.exe /get:"test"<BIOSCONFIG Version="3.2.3.1" Computername="DODPCSI0016" Date="2015/02/12" Time="09:26:03" UTC="1" ><SUCCESS msg="Successfully read BIOS config." /><Information msg="BCU return value" real="0" translated="0" /></BIOSCONFIG>C:\Program Files (x86)\Hewlett-Packard\BIOS Configuration Utility>
 
But the content of the file is this :
 
English;;     Settings file originally created by BIOS Config Utility;     Version:3.2.3.1;     Date:2015.02.12;
 
When i trying to change something and use the parameter /set I get an error.
 
C:\Program Files (x86)\Hewlett-Packard\BIOS Configuration Utility>BiosConfigUtility64.exe /set:"test"<BIOSCONFIG Version="3.2.3.1" Computername="DODPCSI0016" Date="2015/02/12" Time="09:28:46" UTC="1" ><ERROR msg="Problem reading file: test " /><ERROR msg="BCU return value" real="12" translated="12" /></BIOSCONFIG>C:\Program Files (x86)\Hewlett-Packard\BIOS Configuration Utility>
 
Anybody an idea. I must change the bios setting on 250 computers !
 
THX
Ivan
 
 
P.S. This thread has been moved from Business PCs - Compaq, Elite, Pro to H... Read more

A:Prodesk 400 G2 and Biosconfiguration Utility !

We are currently investigating this. Please use the HP PC Client Management forum for questions about BCU.That is the forum that I try to monitor. Although I sometimes look at other forums, I may not see your posts.  topics for the forum          /t5/HP-PC-Client-Management/Community-topics-HP-PC-Client-Management-Forum/td-p/6310851#.VNzUxrHnaUk  Link to the HP PC Client Management forum          /t5/HP-PC-Client-Management/bd-p/pc-client-management  Thanks, RichardI work for HP but am not a company spokesperson. Participation in the community forums is voluntary..

4 more replies
Answer Match 42.42%

Help! I have a new (purchased a year ago but never used) HP ProDesk 600 G1 SFF with has Displayport and VGA outputs (no HDMI).  The Displayports are "DP++".  I'm wanting to use a Philips TV as a monitor which has only HDMI and SCART input (no Displayport or VGA).  Purchased a passive Displayport/HDMI cable but it doesn't work.  The TV does work fine, as I tested it by connecting a Toshiba laptop to it (HDMI  to HDMI).  What am I missing here...could it be a bad Displayport/HDMI cable?  Do I need a active cable not passive?  There's a problem with my HP computer?

More replies
Answer Match 42.42%

We recently received a new piece of production equipment that included an HP ProDesk 600 G1 WIN7 Home Premium 64-bit PC.  The manufacturer assures me that the PC is unchanged for their purpose other than the install of their controller software and a static IP assigned to the onboard NIC which is used to communicate with their equipments controller board. I'm trying to install a PCI-e x1 NIC into this PC for connection to our network.  For some reason the card is not being detected by the WIN7 OS.  I've tried all three PCI-e slots on this computer, reset the bios to factory defaults (in case something was changed) and tried multiple cards, all with the same result.  I've also checked the cards in other PC's and they are detected normally and I'm prompted to install the driver.  When a cable is plugged into the NIC the indicators on the back show activity but there is nothing showing for the 2nd NIC in Device Manager or Adapters in Network and Sharing Center. Is there some obscure setting in the bios that I'm not seeing that disables hardware detection?  Has anyone ever run into a similar case before?

A:PCI-e cards not detected in ProDesk 600 G1

I just found another post related to a ProDesk 800 G1 with the same issue.  There is a link to the datasheet for that Tower referencing a compatibilty list for accessories but I'm not seeing that list.  I've also done a search for I217LM compatibility lists and haven't found anything.  Am I missing something here? /t5/Business-PCs-Compaq-Elite-Pro/800-G1-TWR-not-detecting-PCIe-Network-Cards/m-p/6476718/highlight/...

3 more replies
Answer Match 42.42%

Help! I have a new (purchased a year ago but never used) HP ProDesk 600 G1 SFF with has Displayport and VGA outputs (no HDMI).  The Displayports are "DP++".  I'm wanting to use a Philips TV as a monitor which has only HDMI and SCART input (no Displayport or VGA).  Purchased a passive Displayport/HDMI cable but it doesn't work.  The TV does work fine, as I tested it by connecting a Toshiba laptop to it (HDMI  to HDMI).  What am I missing here...could it be a bad Displayport/HDMI cable?  Do I need a active cable not passive?  There's a problem with my HP computer?

More replies
Answer Match 42.42%

I have a HP ProDesk 600 G2 - Core i7 6700T 2.8 GHz - 8 GB - 256 GB SSD. Ive turned on Wake on Lan in the BIOS. The setting is set to "Wake On Network" and Ive also checked the "Wake on Magic Packet" setting within Power Management in the NIC Properties.  I am able to wake the device when the device is in Sleep Mode, and Hibernation Mode, but not when the PC is shut down. Ive made sure to Shut the PC down through the desktop screen like suggested.  Are there any other setting to enable?    Thanks!

More replies
Answer Match 42.42%

I am having issues finding the correct drivers for the hp prodesk 600 G1 as well as the HP Prodesk G2's. I have downloaded all of the drivers from the HP site, but when applied they still show up as missing in the device manager. This applies to 32x and 64x accorss man machines. Was hoping the drivers on the support site could be updated, as after downloading them ALL multiple times and trying them I still have the issue. Also the driver recover cd that comes with these computers do not have the proper drivers either....

More replies
Answer Match 42.42%

I would like to purchase the M3 screw kit for installing a 2.5" SSD drive in a SFF ProDesk 600 G1. I have 60 machines to upgrade to SSD. The Service Manual states on page 51,  "M3 metric guide screws for 5.25-inch optical drives and M3 isolation mounting guide screws for 2.5-inch hard drives are not provided." On page 61 it shows a reference to the screws but does not provide a HP part number. http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c04331099-1.pdf   

A:ProDesk 600 G1-screws for 2.5" SSD needed

Hi: Are you planning on replacing the standard 3.5" hard drives with SSD's? If so, all you should have to do would be to get a 3.5" to 2.5" hard drive adapter and use the 4 Hard drive isolation grommets from the mechanical hard drive, transfer them to the adapter, and use the standard notebook hard drive screws that either come with the adapter or SSD's to mount the ssd to the adapter. Otherwise be prepared to pay big bucks for the screws listed on page 24. https://parts.hp.com/hpparts/Search_Results.aspx?mscssid=CF3739FF67F44688B733A9FDB63E9F31&SearchIn=P... I've installed 2 SSD's in my 8200 Elite and 8000 Elite CMT's by using the method I described.

2 more replies
Answer Match 42.42%

Dear allAs subject I need to use dual monitor. Can I use the motherboard's integrated displayport or need Graphic card for this purpuse, and if it's required, which adapter should I get for compability.  RegardsTuan anh

More replies
Answer Match 42%

Hi I am looking at these two laptops. Currently at home I have vodafone mobile broadband. I read that these 2 laptop are not compatible with mobile broadband for whatever reason. Is this true? and if this isnt true I have my mobile broadband installed on another laptop, I am guessing it is okay to install on 2 systems, thanks a lot in advance
 

A:Dell mini 10/mini 10 v compatible with mobile broadband?

9 more replies
Answer Match 42%

Hi, this is my first post here in hp support forum and the title says it all. Can anyone please tell me for sure whether it is possible to upgrade my PC to Core i7-4790K? Many thanks in advance.  Regards. Abdullah.

A:Can I upgrade my HP ProDesk 600 G1 SFF to Core i7-4790K?

Hi, Please check page #5 of the following document:     http://www8.hp.com/h20195/v2/GetPDF.aspx/c04128105.pdf Looks like a NO, newer BIOS does not mention anything about CPU. Only   Fixed F10 "BIOS Power On" issue where TIME was not getting saved unless cursor (focus) remained on TIME setting in F10 menu. Regards.

2 more replies
Answer Match 42%

I have bougt HP Prodesk 400 G3 MT   and I had already a Thunderbolt display. HP Prodesk 400 G3 MT has no Thunderbolt output  and a connector (HDMI-Thunderbolt) is not working. --> will  buying a graphics card solve this problem?--> Can you recommend me a video card which i can use my thunderbolt screen? Thanks,

More replies
Answer Match 42%

I have purchased the ProDesk 600 SFF. I want to add an SSD in the 2.5" bay and retain the 3.5" hard drive. In reading the service manual regarding installing a 2.5" drive, page 121 says "Install four black and blue M3 isolation mounting guide screws."  The manual says: "NOTE: M3 metric isolation mounting guide screws can be purchased from HP." Questions regarding adding the 2.5" to a ProDesk 6001. How do I purchase these from HP?2. Are the threads of these screws consistent with most SSD's, specifically Samsung?  I have read conflicting info on the web (wow, conflicting info on the web? That's shocking!!)3. If HP's screws are somehow proprietary, what screws can be used with off-the-shelf SSD's (thread and length, please)?  ( I'd be happy to buy one of the SSD's that HP sells on their website, but their prices aren't consistent with other currently available units by a factor of at least 50%)  Thanks in advance for suggestions/answers











Solved!
View Solution.

A:Adding SSD to ProDesk 600 SFF: Where do I find the correct i...

Ok.  SSD drives are shockproof. That makes them very unlike electromagnetic legacy hard disks, which can be destroyed easily by being bumped or dropped.  That is why many people just use double sided tape.  This is an Occam's razor solution.  

8 more replies
Answer Match 42%

Hello Peeps of HP,Can someone kindly tell me where I can find the pci encryption/decryption driver for the HP ProDesk 405 G2 MT Business PC?  I have not been able to find it listed in the drivers for this device. Help appreciated! 

A:need pci encryption/decryption for hp prodesk 405 g2 mt busi...

Hi: You need this driver, and you may have to manually install it if the auto install doesn't work. This package provides AMD PSP Driver for supported desktop models that are running a supported operating system.  ftp://ftp.hp.com/pub/softpaq/sp74501-75000/sp74653.exe To manually install the driver (if necessary): Close out of any error windows generated by the driver. Go to the device manager and click on the PCI E/D Controller needing the driver. Click on the driver tab.  Click on Update Driver. Select the Browse my computer for driver software option, and browse to the driver folder that was created when you ran the file. That folder will be located in C:\SWSetup\sp74653. Make sure the Include Subfolders box is checked, and the driver should install. Then restart the PC.

3 more replies
Answer Match 42%

When I try to install window 7 Professional x64, can't install, it won't continue.. ANy idea about this ?

More replies
Answer Match 42%

Hi all,Problem stands as:Computer after startup screen show " no option to boot to" message in black background.If conected to network trying to PXE boot over IP6In BIOS setup>Device Config - HDD and DVD listed, also show any USB device if pluged in. BIOS not allow to save any changes in settings(no errors, no messages, but revert to previous state)Error message if try to reset to factory defaults or save settings as default.F9 Boot meniu list only IP6 and IP4 UEFI boot devices(endles list ~100 entries or so)If try to enter BOOT ORDER in BIOS  - PC seizes up, have to powercycle.CMOS reset ( even batery removal for 1 min ) doesn't make change.BIOS v 02.18 ( 05.09.2014 )Win10 x64(unaccesible anymore) Any advice appreciatedThank you

More replies
Answer Match 42%

I have a ProDesk 400 that is unresponsive to log in after being in sleep mode.  I have to force shutdown and restart.  Any ideas?

More replies
Answer Match 42%

When attempting to change HDD, pulled on the ribbon cable instead of the pull tab, breaking the adapter. How do I order a replacement adapter?

More replies
Answer Match 42%

I have a new HP ProDesk 400 G3 that I am trying to set up dual monitors on. I thought that it would be possible because the computer has both VGA and DisplayPort ports. The problem is that the DisplayPort connection does not seem to want to work at all. The two monitors I currently have have both VGA and DVI-D options. I am currently using this DisplayPort to DVI adapter: http://www.amazon.com/C2G-Cables-To-54321-DisplayPort/dp/B00J9CLWP2 I have tried updating the driver for the installed Intel HD Graphics 530 display adapter, and I have tried powering off the computer and powering it back on with only the DisplayPort cable plugged in. I have switched cables between the two monitors. I have a feeling it might be the adapter, but I was hoping someone here might have more insight.

More replies
Answer Match 42%

Hi all, We try to install HP Ethernet 1Gb 2-port 332T adapter to HP ProDesk 400 G2 Microtower PC, but after power-up - speeker beep five times. Same situation on HP 280 G1 Microtower PC. We test this adapter on HP ML10 v2 server - system starting up without any problems. I know, this adapter is designed for servers, but why PCIe device does not run on the PC? Other server network adapters, such as Intel i350 work without problems. Thanks for the help.

More replies
Answer Match 42%

Hello, I have got a HP ProDesk 600 G1 and want to upgrade the GPU to a bigger vid card.So I thought of a VEGA GTX 750 ti SC. Would it work ?It only consumes 60 W and my desktop got a 300 W power supply.would this work? Thanks.Nick

More replies
Answer Match 41.58%

We deployed ~50 HP ProDesk 600 G1's in the enterprise environment I work at.  We have them set to auto-update the BIOS and we deployed a BIOS password.  Every time there is a BIOS update pushed by HP when the machines reboot they appear like they are trying to PXI boot and hang.  Are there any ways to allow the auto-update without providing the password or to just boot normally?

More replies
Answer Match 41.58%

We deployed ~50 HP ProDesk 600 G1's in the enterprise environment I work at.  We have them set to auto-update the BIOS and we deployed a BIOS password.  Every time there is a BIOS update pushed by HP when the machines reboot they appear like they are trying to PXI boot and hang.  Are there any ways to allow the auto-update without providing the password or to just boot normally?

More replies
Answer Match 41.58%

at my work i been given the task of making a sysprep image for an hp prodesk 600 g2 it would blue screen before sysprep was done so i did alot of things 1. trying to install the hard control driver , update the bios2. installing all drives and updates plus the software nothing was working .3 so when in to the bios and found Allow PCIE/PCI SERR# interrupt and turned it off4. Sysprep when throught so i had to find out why was it windows updating drives in windows updates5 or was it this bios setting so i keep recreating the problems turning this and that on and off6 but in the end Turning off Allow PCIE/PCI SERR# before i syspreped fixed it7 just makes sure to turn Allow PCIE/PCI SERR# back on before it boots so you have no problems thanks hope this helpsDouglas Gray

More replies
Answer Match 41.58%

Hi Everyone, I have a new ProDesk 600 G2 that I have been using for about a week.  Almost every day, the system freezes, at random times, and the only way to get thing going is to power cycle the system.  I look in the event viewer, system logs, and it registers an event ID 6008.  It states "The previous system shutdown at (specified time and date) was unexpected."  What is strange is that the PC did NOT shutdown, at the time it stated.  It just froze, or appeared to freeze.  Then when I power cycle the PC and restart it a new entry is placed in the event viewer.  This one shows as Event ID 41 and states..."The system has rebooted without cleanly shutting down first.  This error could be caused if the system stopped responding, crashed, or lost power.  Again, this second error coincides with the time I power cycled the system, so I would expect this one.  I have tried reinstalling all the latest drivers, but nothing seems to help.  I have used HP desktops for the last 10 years and have never encountered anything like this.  A search, on the web really didn't bring anything up.  I believe it may be defective hardware, but wanted to see if anyone had any suggestions before going that rout.  Thank you all in advance for any suggestions. 

A:ProDesk 600 G2 keeps freezing daily, at random times.

Jperezklh, welcome to the forum. I suggest that you contact the seller for help.  If you bought it from HP's Store, you should contact HP Customer Service.  You should not be having any problems with a brand new computer. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

8 more replies
Answer Match 41.58%

Dear all As subject, I read some articles from Internet and bought a Displayport_to_VGA to connect : the Mainboard's integrated Displayport with 2nd monitor. But system cannot recognize the 2nd monitor at displayport. I haven't seen any setting on BIOS about this.  Can anybody help me to fix this problemMany thanks, 

More replies
Answer Match 41.58%

Hi,  I replaced the PC Case of the Prodesk to a bigger one, changed the PSU and added powerful GPU in it. My question is Can I change my fans to an aftermarket one? As it is very loud when playing games, I tried to do this it comes up with a front fan error, CPU fan error. In addition to that, the motherboard doesn't accept other USB 3 front socket configuration. Product no. T4R72ET#ABU Any help will greatly appreciated. Thanks!

A:My prodesk doesn't want to accept other fans and USB 3 confi...

The fans required must operate at a minimum speed.  Installing quiet or low speed fans will trigger a failure.   Install a new USB 3.0 5.25 adapter panel.

2 more replies
Answer Match 41.58%

My company purchased three HP ProDesk 600 G1 SFF desktop computers recently, upgrading from three Optiplex 380s. The office uses an older, networked dot matrix printer. Some of the software that prints to this printer requires a Parallel Port driver assigned to LPT1, and the ProDesk 600 G1 does not come with a Parallel Port built-in (it has a spot on the motherboard where one can be added, judging from the motherboard layouts I have found online for this product). I need to purchase expansion cards that will work with Windows 7 Pro 64-bit and can be added to the hardware on this desktop computer. I just need to know which Parallel Port card to buy. I find the HP support site rather complicated and could not find a place where I could investigate what parallel port expansion cards would work with this desktop. All help is appreciated.potterjazz

More replies
Answer Match 41.58%

Dear All, I just buy new one HP desktop - HP ProDesk 400 G3 MT. But when I install windows 7, usb mouse and keyboard not working so that I could not install windows 7. I try install windows 8.1 pro, working very well. I don't know why HP ProDesk G2 install windows 7 ok but G3 can not. How can I install windows 7 on G3? Please help me in this case. Thanks and best regards.

More replies
Answer Match 41.58%

Hi, For a school i want to add the following system, Prodesk 600 SFF G2, in Microsoft MDT.First problem was the NIC driver, had to add it to the LiteTouchPE WIM file. That solved it.After the OS was installed I couldn't use the mouse or the keyboard ( both USB )When I install Windows 7 from a bootable USB drive It doesn't work either.It is a Skylake system, and I know there are problems with the USB in combination with Windows 7. Anybody already solved this problem ? 

A:Downgrade Prodesk 600 SFF G2 to Windows 7, no mouse and keyb...

Hello Dr_Ice HP does not support Windows 7 on these products, but a workaround is available. Refer to the following procedure for injecting USB 3.0 drivers into the Windows 7 image:  1.Create an ISO image file from a Windows 7 OS DVDa. Insert the Windows 7 DVD into the DVD drive.b. Open the ISO creation software.c. Create an ISO image file from the Windows OS DVD.2.Create a ?temp' folder on the HDD and copy all the files from the Windows 7 image to the folderEg. c:\temp3.Create a folder called ?wim' under c:\E.g. c:\wim4.Copy the install.wim and boot.wim files, located in the c:\temp\source\ folder, to c:\wim.5.Download and install the Windows Automated Installation Kit for your specific OS versionWindows 7:https://www.microsoft.com/en-us/download/details.aspx?id=57536.Start the AIK Deployment Tools Command Prompt with administrator rights:a. Search for "Deployment and Imaging Tools Environment" in the Start Menu.b. Right-click and select Run as administrator.7.From the command prompt, change the location to c:\wim, Command:cd c:\wim8.Create a directory under C:\wim called "mount", Command:c:\wim>mkdir mount9.Mount the WIM image with write permissions, Commands:For 32-bit OS:c:\wim> imagex /mountrw install.wim 5 c:\wim\mountFor 64-bit OS:c:\wim> imagex /mountrw install.wim 4 c:\wim\mount10.Add USB3.0 drivers to the install.wim image, Commands:For 32-bit OS:c:\wim>cd c:\usb3\x86c:\USB3\x86>dism /image:C:\wim\mount /add-driver /driver:c:\USB3\x... Read more

4 more replies
Answer Match 41.16%

Hi,The same situation on three computers WITHOUT rear fan.After bios update to latest version (02.46 Rev.A) I reciving on every boot error 512-rear chassis fan not detected.So, the problem is definitely with bios, anybody have similar problem?

More replies
Answer Match 41.16%

Hello My machine has been working fine and HP Assistant prompted me to upgrade the BIOS.  So I followed the instructions earlier and now my machine no longer works after it restarted.  I turn the machine on and nothing happend now - I can hear the fan but no output to the screen and no beeps at all.  Can someone please advice on best actions to get it up and running.  Many thanks

More replies
Answer Match 41.16%

Greetings! I'm experiencing a problem on what appears to be HP Prodesk 600 G2 computers exclusively.  Intermittently, when the computer wakes from sleep or standby, the computer loses its monitor drivers. When the computer wakes the monitor is now in 640x480 resolution and if you look in the Screen Resolution window it shows the current driver is the "Generic Non-PnP Monitor".  These computers are hooked up with dual HP displays of like model and when it happens the fix seems to be to simply restart the computer. While this is easy enough it is extremely disruptive to the work of our users and so I've been tasked with finding a real fix to this problem. To that end I have updated the computer with the latest BIOS from HP as well as the latest Intel graphics drivers from HP's website (Intel Graphics 530 chipset) but to no avail. We have also tried using different monitors and it continues to occur intermittently. Also, we have many HP Prodesk G1's in the building and none of these have this problem. This leads me to suspect that this is a problem exclusive to the Prodesk G2's and not with Windows or the monitors we are using. It should also be noted that both monitors are connected using the on-board display ports. My hunch is that it is the Intel Graphics 530 (onboard) graphics chipset that that's the problem but I don't think we should have to buy a seperate graphics card to get two displays to work on these computers especially when it's so clear th... Read more

More replies
Answer Match 39.9%

I have an iMac ALU 8,1 from 2007
20 Inch, 2.66 Ghz, 2 GB ram, ATI HD 2600 XT, 640 GB Sata 7200 rpm

And my problem is that I am about to buy a cable to connect a secondary monitor, and I do not know wich one I need.
I don't know wich port I have and I can't really tell the difference.
I searched the net a bit but couldn't seem to find this info.

I looked at the tech specs of the new iMacs on apple.com and they have Mini DisplayPort, but that's the new revision.
What about mine and how do I tell the difference?

Also, where can I get theese kind of cables really cheap? b/c it's freakin expensive from apple.
 

A:Solved: Mini DVI and Mini DisplayPort ????

8 more replies
Answer Match 39.48%

Opera Browser customer service number, +1-844-331-5444  Opera Browser customer service Opera Browser customer care telephone number +1-844-331-5444 Opera Browser customer care telephone +1-844-331-5444  Opera Browser customer care phone number  +1-844-331-5444 Opera Browser customer care phone Opera Browser customer care number  +1-844-331-5444 Opera Browser customer care opera technical support telephone number opera +1-844-331-5444 technical support phone number opera technical support phone opera +1-844-331-5444 technical support number opera technical support +1-844-331-5444  helpline number opera technical support +1-844-331-5444  opera technical problems helpline telephone number opera technical problems helpline telephone opera technical problems +1-844-331-5444  helpline phone number +1-844-331-5444  opera technical problems helpline phone opera technical problems helpline number +1-844-331-5444  opera technical issues helpline telephone number +1-844-331-5444  opera technical issues helpline telephone opera technical issues helpline phone number +1-844-331-5444 opera technical issues helpline phone opera technical issues helpline +1-844-331-5444  number opera tech support telephone +1-844-331-5444 number opera tech support telephone opera tech support phone number opera tech support phone +1-844-331-5444 opera tech support number opera tech support helpline telephone number opera tech support helpline +1-844-331-... Read more

More replies
Answer Match 34.44%

I recently tried the extension and I went to this by using edge -it had a welcome section with a sub section on extensions. When I clicked on it, it had a few extensions, I think about 20
Are those the only extensions available or are there more?

A:How many extensions are there?

I think so yes, its day 2, will be a lot more in a month or 2 and as and when MS deliver on their extension API road map.

1 more replies
Answer Match 34.44%

have a picture with the extension mcd. does anyone know what program i can use to oopen it with? thanx
 

A:extensions

6 more replies
Answer Match 34.44%

Hi Guys

I've just got IE9 working and when i booted i got the "disable add-ons to oost start up time" and the most time consuming compenent is DCA BHO, made by Complete Inc., can anyone tell me what this is and whether i need it

A:IE Extensions

It is a driver

Dca-bho.dll with description DCA BHO is a process file from company Compete, Inc. belonging to product DCA BHO.
There are 6 different variations of the file in our database and the file is digitally signed from Compete Inc - VeriSign Time Stamping Services Signer - G2
We do not recommend removing digitally signed files from Compete

This was found. Since it is digitally signed, I would agree. Dont touch it.

3 more replies
Answer Match 34.44%

I need to set my printer a little further than its USB cord will reach. I have 2 short cords to extend it, but they are much smaller around. Does this make a difference? Or, do I need to go buy a heavier extender?

Thanks
Peg
 

A:USB Extensions

I think more significant are the extra push-fit connections you'll be adding, each reducing the reliability of the chain when compared with a single continuous cable. You might also consider that a lot of the printer manufacturers are too mean to supply USB cables with their printers, so they must deem the cost of providing decent ones unacceptably high.
 

1 more replies
Answer Match 34.44%

Hello,
I have researched this but i hope to get a difinitive answer here. It has been suggested that USB should only be extended 16 feet. Others claim as much as 36 feet. I extended a usb device nineteen feet, one ten foot and one six foot cord plus the three foot device usb cord. The device was originally equipped with a serial input and a usb adapter card was supplied with the machine. The device was working fine for several days but the usb adapter card failed. One of the tiny chips became very hot and there were signs of heat damage on the back of the pcb. The supplier has replaced the card and everything is working once again but i am now using a laptop with only the three foot device cord attached until i can verify that extending the usb could not have caused the failure. And that is my question. What are the consequences if any, of extending a usb device? Would it simply affect transfer rate or cause communication failures or could it actually cause the failure of circuits within the device? Any help would be greatly appreciated. It is truly a pain having to use a laptop near the device. Others have stated absolutely not, using extensions could never cause failure of the circuits, they could only cause performance issues. Are they correct?
 

A:USB extensions, how far?

wiki said:



The maximum length of a standard USB cable (for USB 2.0 or earlier) is 5.0 metres (16.4 ft). The primary reason for this limit is the maximum allowed round-trip delay of about 1,500 ns. If USB host commands are unanswered by the USB device within the allowed time, the host considers the command lost.Click to expand...





wiki said:



1394 Cable length is limited to 4.5 metres (14.8 ft), although up to 16 cables can be daisy chained using active repeaters; external hubs, or internal hubs are often present in FireWire equipment. The S400 standard limits any configuration's maximum cable length to 72 metres (236 ft). The 6-circuit connector is commonly found on desktop computers, and can supply the connected device with power.



jobeard said:



Assuming you can afford themClick to expand...

Click to expand...

Of course you an ignore those theoretical limits and may actually get away with it ; again assuming you're willing to live with corrupted data that may result.
 

2 more replies
Answer Match 34.44%

I mistakenly altered the reg and I think this caused the problem. Somethings on my computer work but all of the programs will not open . I get a message that windows can not open a .lnk file. I clicked the option of finding it on the web but could not find any help. I tried to do a repair with the installation disk but it did not help. It said I was missing several files(rundll.exe) was 1 of them Can any one help? I mistakenly had sys restore turned off so no help there. Also trying to reboot to last known good point failed
 

A:.lnk extensions

8 more replies
Answer Match 34.44%

I am trying to download some files (adaware, etc) and they are coming is as .efw, which my system does not know what to do with. I guessed that maybe i needed winzip, but when trying to download that...it too came through as .efw. Can someone give me some guidance?
Thanks
 

A:.EFW extensions

here's a cut and paste from fileinfo.net on what they are and how to deal with them

Compressed .ZIP or executable .EXE file renamed by CA Security Centre to have a ".efw" extension; typically applies to e-mail attachments scanned by Computer Associates (CA) antivirus software.

EFW zipped files may be opened by changing the file extension to ".zip" and opening the file with a decompression utility, such as WinZip or Stuffit Expander; executable files may be run directly by changing the file extension to ".exe" and opening the file.
 

2 more replies
Answer Match 34.44%

I have needed photos on a cd from my former computer with pzp extensions. I can't open in Windows 7. How do I unzip?

A:pzp extensions

Have you tried Google? (click on this text)

1 more replies
Answer Match 34.44%

As the Edge extension library grows, what are some must have extensions that will make day to day life easier.
Posted via the Windows Central App for Android

More replies
Answer Match 34.44%

I just noticed a dll extension by the name of NPDocBox.dll, I can only figure that this is some kind of Plug-in downloaded from the Internet. The thing I am wondering is if I need this Plug-in and if it is harmful to my computer operating syaytem(Windows XP).

Thanks People,

Jenyy
 

A:.dll extensions

No, its not harmful. Its from Adobe I believe.
 

2 more replies
Answer Match 34.44%

After DL avg's new root killer and rebooting, every ext on files on my PC changed to .lik . I have tried to delete programs etc and even tried to delete .lnk using reg editor but I can not get to anything even in safe mode. I tried replacing the reg from ERDNT and it worked for about 30 sec and changed right back to .lnk. I am not looking forward to a complete reinstall - so I need help.
 

A:lnk extensions

Solved with more gray hairs. After many hours of playing with DOS and so forth, I finally found a site www.filext.com that helped solve my problem. Used the 4th procedure to get into regedit and then DL winxp_exe_fix.reg file and copied it into the reg. Had to change the permissions and then reassign .lnk and .exe extensions in file types after I rebooted. The only things that worked without problems on the PC was Outlook and I could get into my doc files. Scary time for awhile.
 

1 more replies
Answer Match 34.44%

I dl a program that was in .rar format.
I used Winrar to extract it to a folder and what I got was 4 files with the extensions. CCD, CUE, IMG and SUB.
What do I do with these to turn it into the program that I can run and install?
I have done some searching on the net but to no real avail.
thanks
 

A:how to use these extensions

8 more replies
Answer Match 34.44%

Hi,

I have a weird problem with my pc.
So far every program works but when I browse in Program Files or in the file extension folder I see that many extensions have that typical Windows icon, when Windows doesn't recognize a certain program/extension. See the icon in the printscreen.

I'll give a few examples of extensions:
.BAK .cfg .db .bin .dat .bat .asp .pif ...

Does anyone have an idea how to fix that?
(I know when I install certain programs that this will be resolved, but how can I fix typical Windows Extensions?)

Any kind of help is welcome.
Thanks in advance for your efforts.

Greetz Carlo

A:Extensions...

Welcome
Hopefully this great tutorial will help.
Default File Type Associations - Restore

7 more replies
Answer Match 34.44%

I got one problem cleared up yesterday, now I have a new problem that's annoying. I recently downloaded Spy Guard a few days ago. and now at start up I get this everytime. I had to write it out cause it wouldn't let me print my screen.
SPY GUARD ALERT
A spyware application has been detected on your computer and has been stopped from executing.

The execution of the file C:\program files\syslog\syslog.exe. has been blocked.
SPYWARE DETECTED: RapidBLASTER
RICK LEVEL: HIGH
Choose on action below: By clicking the OK button, you block the file from running(Recommended)

Runaway OK Delete file

Can anyone tell me how I can get rid of this at start up or is there something else I need to do? Any help needed. Also I keep getting and I explorer error to close down a lot too.Grrrrrr
Lori
 

A:Spy Guard

11 more replies