Tech Problem Aggregator

Y510P Reset Battery

Q: Y510P Reset Battery

My battery keeps jumping from 40% to 7% within a matter of minutes. I tried resetting my battery but the battery won't go to 100% charged to be able to reset it (it only charges to 99%). How do I fix my batter if I cannot fully charge the battery and then fully discharge the battery?

More replies
Answer Match 86.52%

Hi, maybe it was already posted but little had no results so i'm opening another message - there is no fix. I have Y510P with Windows 8.1 alomost a year (still have waranty). For now I'm using Battery Gauge Reset several times. The last time appear a problem. I started Battery Gauge Reset and when the PC goes 0% it power off and I can't power on it. After some struggle i found a way to charge it; I have to follow these steps exactly:1. Turn the machine off2. Remove the battery3. Remove power cable from the laptop4. Remove the powercable from the socket5. Insert the cable in socket6. Insert the cable in laptop7. Start the laptop8. Insert the battery while the laptop is starting Then I start to search a solution. I tryed everyting that I found. I already measured my voltage on the power adapter and that seems to work properly, reset BIOS to default setting, power off the PC and hold down power button for 20-30 seconds, reinstall Lenovo Energy Management, charge battery and disharge (from this acticle http://mobilesupport.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-y-series-laptops/ideapad... ), remove battery and uninstall windows battery driver then insert battery back. Nothing helped! Is there a fix for this problem or I have to go to service?

A:Y510P not charging after Battery Gauge Reset

Hi guys. I try with my car power supply for PC and it works. When I put car power supply to Y510P it alarm me for high current drain for a 1 second and then alarm power off and PC and car power supply works fine. When I put AC power supply it doesnt work but after it have no DC voltage on the out. I have to unplug it from wall soccet and plug it again to works. I think that AC power supply have any high current safety system and power off the voltage.  Maybe problem is in battery.

9 more replies
Answer Match 63%

Okay here are the details:Windows 10 HomeIdeapad Y510P, only a few years oldworks perfectly finebattery at 0%, plugged-in not chargingoriginal battery and power cordsI can't remember how to get this message to pop up again, but I remember it saying something along the lines of 'Lenovo does not support batteries they didn't make so we are going to pretend you don't have one in'. I have the same battery and charger that came with the computer. I've tried messing with the settings and taking the battery out and putting it back in. I've been to the BIOs screen and looked around. I've searched through forms and everything. I'm about to just buy a new battery for it and see if that fixes it. But I'd like to know what happened so I can prevent it from happening again. Did the battery just get too old and decide to die on me? It's been very frustrating.

More replies
Answer Match 62.16%

I recently just received my Ideapad y510p laptop back, and I unplugged it and the battery dropped to 60% but when I try to charge my laptop, it'll just stay at 60%. The battery says its plugged in but it won't charge.  











Solved!
Go to Solution.

A:Ideapad y510p battery not charging.

please, refer the following thread:http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/p500-battery-at-60-not-charging/m-p/1158013...

9 more replies
Answer Match 62.16%

Some day I was using my laptop and then left it on for a while because I have to do something else (I left it for about two hours). When I came back the laptop was dead (at least I thought that because it was not charging the battery nor starting up with the charger plugged in). A couple of days after that I tested the laptop again, plugged in the charger and it was charging again the battery. I could start the system fine. After a reboot the system was not charging again, but the battery had some charge so I could start the laptop again. In summary, there's not problem with the battery (there is power going from the battery to the motherboard), there is no power going from the charger to the battery (sometimes it does, sometimes don't, but the most times don't). With the battery unplugged and the charger plugged in there is no power going to the motherboard. battery and no charger -> ok, power to the motherboardbattery + charger -> sometimes works, but almost neverno battery, only charger -> does not work Power jack tested and it's ok. Charger tested and it's ok. Also trackpad stopped working, windows does not recognize it. Thanks for your help and sorry for the long post.

More replies
Answer Match 60.9%

I have a lenovo ideapad y510p and everything was fine until for I thought I'd do the battery reset in the lenovo energy management,at first the battery was dead and laptop wouldnt turn on,,I found one way around this which is that first I take the battery out and then insert the ac adapter,the laptop turns on then I put it in hibernate while I insert battery after which it seems to charge but only after I do these steps,but if I take the adapter out and insert it back in,it would stop charging.this is all because of the lenovo energy management software battery reset.I've uninstalled it but it doesnt work.any suggestions?I'm guessing one of the steps after full charge during the battery reset the battery gets drained where it says "plugged in and not charging" until it reaches zero is the problem.

A:lenovo ideapad y510p ac adapter battery problems

 

8 more replies
Answer Match 49.98%

Hi there, we have a 9 month old Acer Chromebook 11 model CB3-111Had a black screen problem, and the suggested way on the Acer support website was to do a hard battery reset. As the battery is not user-removable this reset was to be done via a pinhole in the underside of the unit. But I cannot find the pinhole. Does anyone know where it is please? 

More replies
Answer Match 49.98%

Recently replaced my battery and noticed the level is not correctly reported. As a result, it shuts down without warning. Is there a reset procedure I'm missing?

A:New Battery Installed in S3-951 ... How do I reset...

Hello, Try this:Go to Device ManagerExpand BatteriesUninstall Microsoft ACPI-Compliant Control Method BatteryStay in Device Manager and Scan for hardware changesThe device will be re-installedCheck if the battery level is correct

2 more replies
Answer Match 49.14%

i replaced the cmos battery on a pc with a bad onboard graphics card and now the pci graphics card is not working, when i turn on the pc i get no signal to the to the monitor, so now i cant even access the bios, is there anything i can do? any reply's would be appreciated
 

A:no display after cmos battery reset

12 more replies
Answer Match 49.14%

I have a Toshiba laptop which decided to setup a bios-password , for who knows why..

After many scratches (both on the laptop and on my hands) I managed to disassemble the laptop, to remove the cmos battery.
Now I can see the cmos battery soldered into the laptop. 2 small wires that are connected to the +ve and negative sides of the battery are soldered to the mobo.

Is there an alternative to unsoldering the battery. I don't have any experience with soldering and would like to try safer alternatives, if any, before I have to try unsoldering. Is it possible to shot the battery or do something else that would reset the bios?

Thanks

Oh and I have searched like crazy for 'software' solutions and master passwords but can't find anything that worked.
Laptop -Toshiba satellite a135-s2276
 

A:reset cmos battery without unsoldering?

Cut the wires, then reconnect them later... even if you have to insert a length of wire... but learn to solder asap.
 

9 more replies
Answer Match 49.14%

Hi, guys!

I am in need of some help here. Mine is a Compaq Presario 2100 series Laptop, and I've been using it since it was new (some 3-4 years ago). My battery pack provided me with up to two hours of power, of course, depending on use, and open applicaions, until about two weeks ago...

These past two weeks it has been behaving very strangely: it began marking 100% charged, but provided with about only 30 mintes of power... this week it came down to 10 minutes; tday I couldnot get it past 4 minutes. It doesn't even has the power necessary to hibernate or suspend.

... I understand battery's normal wear and tear, but I use it with a lot of care: I discharge it fully at least once a week, I calibrate it using a Batery Optimizer tool... and I believe this reduction in power capacity is not normal; but rather excesive; I had an older laptop (Texas Instruments) which lasted with me for some 5 and a half years, and the battery could last for an hour and a half by the time I sold it...

The Compaq Presario battery has a power indcator built on it, and it shows 5 leds which lite green, yellow, or remain off, depending on the charge. When fully charged, this gauge will lite in yellow (meaning low charge), on the first led, and green (indicating full charge) on the other 4 leds.

I believe this is an indicatr of the battery stuck on charging maybe only one cell, and leaving the others empty. Another indication for this is that it used to take a long time to charge, an... Read more

A:Laptop Battery Reset/Restart

The only way to reset the "memory" on the battery is to completely drain it.
Unfortunately,draining it once a week has probably worn it out.
Should only drain it when it shows signs of not fully charging.
 

1 more replies
Answer Match 49.14%

All, I bought a brand new battery for my W530 running Windows 10.Somehow I was able to change the battery threshold to 70% but now I want to get it back to 100% and cannot find the setting I used to change it the first time.Feels like I am stuck with a battery that can only charge up to 70 % now... Thank you for your help.  



Thinkpad W530 /i7-3720QM [email protected] /RAM 24 MB /BIOS 2.62 /NVIDIA Quadro K1000M /Windows 7 Service Pack 1

More replies
Answer Match 49.14%

hi guys i want to know how do i perform reset of battery gauge in a situation where there is lot of power break down in my country like i cant have a 6 hours electricity in a day every 2 hours or 5 hours electricity goes out so please guide me to a  solution?



T61 , T420 , W520

More replies
Answer Match 48.72%

I have performed the battery reset procedure by pressing the reset button on the underside of the laptop. The computer will only remain on for a minute or two before randomly turning off. The computer has no issue while the power adapter is plugged in. Any other suggestions?

A:The battery reset procedure will not solve my powe...

Hi dlyssy84 See if you can borrow a similar charger for your model (just check that the power input/output is the same). Let it "charge" for a while, then try to run it on battery. A friend once had the same problem on an old Aspire 5315 (I think) latop. The charger had enough power to run the laptop, but not to charge it as well. He bought a universal charger that solved the problem! Obviously, if the problem persists, then the battery will be at fault & will need replacing.

3 more replies
Answer Match 48.72%

I have performed the battery reset procedure by pressing the reset button on the underside of the laptop. The computer will only remain on for a minute or two before randomly turning off. The computer has no issue while the power adapter is plugged in. Any other suggestions?

A:The battery reset procedure will not solve my powe...

Hi dlyssy84 See if you can borrow a similar charger for your model (just check that the power input/output is the same). Let it "charge" for a while, then try to run it on battery. A friend once had the same problem on an old Aspire 5315 (I think) latop. The charger had enough power to run the laptop, but not to charge it as well. He bought a universal charger that solved the problem! Obviously, if the problem persists, then the battery will be at fault & will need replacing.

3 more replies
Answer Match 48.72%

I have an Acer Veriton X490G,with Core i3 cpu,4 gig RAM,running a windows 7 32 bit...now this machine requires the CMOS battery to be reset all the time it to boot. Otherwise it doesn't seem like there's any form of power that's going to the motherboard. How do i go about fixing this? 

More replies
Answer Match 48.72%

I have a problem with my battery gauge which doesn't seem to show the right battery level and at this point my laptop just dies with no warning when the gauge is at around 40 %. The battery gauge reset doesn't help at all. I've even tried with a new replacement battery, but the results are the same.I hope there is a way to fix this.

More replies
Answer Match 48.72%

I recently did a hard reset on my Lumia 640 running 8.1 update 2 due to issues in sync (805a8011 & 8500201D) errors. Right after the reset I noticed usual drop in charge in the battery.. Even when in charging, the battery drops by 1 or 2% which I noticed a few times. I checked the background apps and killed then and did everything possible to keep the usage minimum. But even then the unusual behaviour persists. Could it be some system error during reset? Do I need to perform another reset or what else can I do? Please help with your valuable advice guys.

A:unusual battery behaviour after hard reset

Originally Posted by Windows Central Question I recently did a hard reset on my Lumia 640 running 8.1 update 2 due to issues in sync (805a8011 & 8500201D) errors. Right after the reset I noticed usual drop in charge in the battery.. Even when in charging, the battery drops by 1 or 2% which I noticed a few times. I checked the background apps and killed then and did everything possible to keep the usage minimum. But even then the unusual behaviour persists. Could it be some system error during reset? Do I need to perform another reset or what else can I do? Please help with your valuable advice guys. Your system is updating, downloading and syncing all core and 3rd party apps, and it needs time, usually a couple of days, after a hard reset.
Keep it plugged and wifi connected, then receck all system settings like video uploading e.g., they are all set to on by default

1 more replies
Answer Match 48.72%

I have an Acer Veriton X490G,with Core i3 cpu,4 gig RAM,running a windows 7 32 bit...now this machine requires the CMOS battery to be reset all the time it to boot. Otherwise it doesn't seem like there's any form of power that's going to the motherboard. How do i go about fixing this? 

More replies
Answer Match 48.72%

OK, it's a Acer Aspire 9300. Someone brought it to me, they thought the battery had died and bought a new one. So I discovered that Acer doesn't really have anyway to calibrate a battery...either know with a new battery you really shouldn't have to. So the situation is that if I take the new battery out, and unplugged the AC Adapter, help the power button for 20 seconds like the acer website says to...plug in the ac power and its fine. I put in the new battery and press power, nothing. Plug in the ac power and it boots up, but...device manager sees the battery, I try to open power management and acer has this thing called eManagement and stuff that's supposed to help with these things and then I get an error message saying index is out of range...I'm at a loss and the acer website to even email their technical support isn't working. any suggestions would be great.
 

A:Power Reset and Battery Calibration Problems

uninstall all acer power management software. just look what the windows will tell you about battery. the battery assembled with bq2085 battery controller. it's quite smart and it will do all work for you
 

1 more replies
Answer Match 48.3%

Hello everyone--I just put together a computer and when I turned it on for the first time i had to reset the cmos for anything to happen--other than the fans running.. Installing the os was a nightmare because it would never reboot unless I cleared cmos..

This is a TF8200 from Biostar and a 9950 amd x4. There is a pci firewire addon card and no video card--there are 2 sata wd 640 gb hard drives and i did not set master slave---did i have to?? with them being sata...antec case with 430 watt ps

I have never heard any beeps

There are also 8 gigs 4x2gb of patriot memory in it now . I tried only x4 gb of crucial [1.8v] and problem was still there--I also tried with 2 x 2g of Patriot--no go..

The memory is in good...

I have had to clear cmos a lot,but have not removed the battery---it has 3 clips holding it in?? Is that normal ??

could i get some help with this--it is not my first build but my first problem.

Does The fact that I had to clear cmos on initial start up to get it to post mean the battery is dead.

The winxp pro 64 bit os in installed but it was a nightmare.

I have not updated the bios mostly because it did not start up right the first time so while the bios update will help some thing i don't feel this is caused by an old bios

Thanks for any help
Last edited by joneq; 09-May-2009 02:20 PM.
 

A:had to reset cmos on initial startup--dead battery???

16 more replies
Answer Match 48.3%

Anyone experience the same problem W550S for window 10 unable to Perform Reset under "Battery Reset Gauge" on menu "lenovo setting". Further, unable to install power managment 1.67.12.16 nor 1.67.12.14.

A:W550S window 10 "battery reset gauge" failure

I have a similar problem with my X1 (20A7).  Did all the latest updates yesterday (Sep.13, 2016) and now power manager doesn't open if you double click the batttery - nothing happens.  And to get the battery to show up, I had to unload TP settings dependency, re-run the PM driver, then reload TP settings dependency.  Still can't open power manager.

1 more replies
Answer Match 48.3%

Hello everyone! My name is Kevin and I've had my Lenovo Y410P for a little less than 2 years. So recently I downloaded Battery Bar as I was realizing that my battery duration was slowly receding.Battery Bar, a program that shows battery level and wear, stated that my 6 cell battery had experienced 54.3% wear. I browsed the internet for specific tips on how to increase my battery duration and came upon battery recalibration. I tried it a couple times manually, but I didn't get any results. So, I then turned to the battery gauge full-charge/discharge function in my Energy Management. After running that through the night, I realized the next morning that the battery was depleted and I couldn't turn on my laptop or even charge my battery unless I followed the steps:- Remove the battery from the laptop.- Plug in the AC adapter and use the laptop without a battery.- The battery can be reattached. The battery is able to start charging. - If I remove the AC adapter for a second and reattach it, it will not be recognized and it will not charge the battery. As of now, Battery Bar shows that I have 0% wear of 52,830 mWh which is significantly less than the full capacity of a 6 cell battery; however, it's still better than what I had before. Anyways, does anyone else have this problem? And if you have, how did you resolve this issue? Thank you!

More replies
Answer Match 48.3%

Hi,

How do I reset my battery report stats? Somehow it decided that it was active for half a million hours in a day and I need to remove that entry.

I'm running Win 8.1 on a Surface Pro 2.

Thanks !

Battery life estimates

Battery life estimates based on observed drains

AT FULL CHARGE

AT DESIGN CAPACITY

PERIOD
ACTIVE
CONNECTED STANDBY

ACTIVE
CONNECTED STANDBY

2013-11-05 - 2013-11-12
-
-

-
-

2013-11-12 - 2013-11-19
4:58:47
-

4:58:47
-

2013-11-20
591184:35:53
-

588396:51:02
-

2013-11-21
5:35:05
-

5:34:32
-

2013-11-22
3:45:46
-

3:44:20
-

2013-11-23
6:19:48
-

6:18:44
-

2013-11-24
7:53:43
-

7:56:24
-

2013-11-25
5:40:24
-

5:42:19
-

2013-11-26
5:00:33
-

5:01:45
-
Current estimate of battery life based on all observed drains since OS install
Since OS install

More replies
Answer Match 48.3%

Anyone experience the same problem W550S for window 10 unable to Perform Reset under "Battery Reset Gauge" on menu "lenovo setting". Further, unable to install power managment 1.67.12.16 nor 1.67.12.14.

More replies
Answer Match 48.3%

Hey all, I want to do a complete power down of the laptop. Windows has a habit of remembering errors through a reset.
Since I cant remove the battery in this one, how do I complete a power down, yes remove the AC plug, what do I do next to simulate a battery removal.

I remember one model you could push a button through a hole underneath, I cant seem to find one on this model or... I need better glasses to find it hehe.

Also I have a recurring issue with some update, shut down only type, not a restart type, and its always there. I was hoping a complete power down might help fix this.

I have run the windows mr fixit windows updater fixer but no joy....

Thanks in advance for any help, I specially want to Power down without having to unscrew the back and disconnect the battery.

Cheers.

A:Satellite Z830 PT22LA-001001- Battery reset

To do a reset you hold the Presentation Button and the Power Button down for 10-15 seconds.

1 more replies
Answer Match 48.3%

Anyone experience the same problem W550S for window 10 unable to Perform Reset under "Battery Reset Gauge" on menu "lenovo setting". Further, unable to install power managment 1.67.12.16 nor 1.67.12.14. after upgrade from 8.1 to 10In addition, whenever you open any lenovo setting, system update or companion, it always left several window update tools .dmp  files on C drive

A:W550S window 10 "battery reset gauge" failure

In addition, whenever you open any lenovo setting, system update or companion, it always left several window update tools .dmp  files on C drive

1 more replies
Answer Match 48.3%

Hello everyone--I just put together a computer and when I turned it on for the first time i had to reset the cmos for anything to happen--other than the fans running.. Installing the os was a nightmare because it would never reboot unless I cleared cmos..

This is a TS8200 from Biostar and a 9950 amd x4. There is a pci firewire addon card and no video card--there are 2 sata wd 640 gb hard drives and i did not set master slave---did i have to?? with them being sata...antec case with 430 watt ps

I have never heard any beeps

There are also 8 gigs 4x2gb of patriot memory in it now . I tried only x4 gb of crucial [1.8v] and problem was still there--I also tried with 2 x 2g of Patriot--no go..

The memory is in good...

I have had to clear cmos a lot,but have not removed the battery---it has 3 clips holding it in?? Is that normal ??

could i get some help with this--it is not my first build but my first problem.

Does The fact that I had to clear cmos on initial start up to get it to post mean the battery is dead.

The winxp pro 64 bit os in installed but it was a nightmare.

I have not updated the bios mostly because it did not start up right the first time so while the bios update will help some thing i don't feel this is caused by an old bios

Thanks for any help
 

A:had to reset cmos on initial startup--dead battery???

I think I posted this in the wrong forum I reposted in Hardware forum--you can delete this
 

1 more replies
Answer Match 48.3%

I tried factory reset and my battery died. After i pluggued my laptop to the charger, a black screen appears with a msg saying " an operating system wasn't found. Try disconnecting any drives that don't contact an operating system" and asks me to restart my laptop followed by a continuous beeping sound. Can someone please help me...

A:Factory reset but battery drained, probook doesnt log in

Hello, Welcome! Thank you for posting in the HP Support forum. Despite the fact that the battery power drained during recovery, I suspect the recovery partition is still there and intact. You just have to restart the recovery process. Here is how: 1. Please, shutdown the computer using the power button2. Power it on.2.1 As soon as you press the power-on button, imeediately start hitting the Esc button (like tap-tap-tap).This should open a HP Startup Menu which may look similar to this one 3. Choose F11 for System Recovery options.The computer should boot from recovery partition to open you various recovery options. Note, that F11 option will only work if the recovery partition is there (not deleted) and intact. From there, you have prenty of options to choose from. Follow the on-screen instructions . Details here >> http://support.hp.com/us-en/document/c00006110 Let me know if this helps. If you experience any issues, do provide details and let me know.

7 more replies
Answer Match 47.88%

Unit has been working fine.  Went to put into hibernate mode as usually do, but did not have that option.  Put it to sleep.  Now won't wake up.  30 second push of power button with battery removed didn't help.  Any ideas?

A:Aspire 5560-sb256 won't boot. Battery reset doesn...

start pc logo comes on then windows and says loading files..then screen goes blank..tried alt f1o ..finally said restore to factory settings...then back to acer startup and same thing all over again

1 more replies
Answer Match 47.88%

HELP! Computer won't boot! Tried everything!

Ok so this is my set up:

DDR400 512mb Ram

Asus A7N8X-X motherboard

sapphire radeon 9600xt 265mb GFX

amd athlon 2600+ cpu (1.91ghz)

80gb HD (just some cheap one- i forget brand, perhaps seagate)

edit: a floppy and dvd burning drive


Ok and the problem is:

I installed a ripped off ****ty version of XP. Never really worked splendidly.
I changed somehting in the bios, i had no idea what it was, i'm stupid for doing so i realise. it was something to do with speed, it was at about 100mhz and i changed it to 200mhz. also note, i had the "bios virus alert thing" ON.
the next few boots were dodgy and it only booted up every second or third attempt. if it didnt boot up it wouldnt boot and just went beep (long beeps and repeated -in no code) this worked for 4 boots before it never booted again.
it just beeped.
until i moved the jumpers on the 3 pins from the two pins closest to the battery position to the furthest two. and turned the pc on. it didnt beep. the monitor didnt respond and but it seemed to be turned on (the cpu fan was going and a green LED on the mobo was on). i then turned the power off. and stuck the jumper back on the original pins and turned it back on hoping the BIOS would be reset but the beeping sequence continued and nothing seemed to start. So then i took out the battery for over half an hour... then put it back in. (with the jumper still on the original pins- nb: the... Read more

A:HELP! Computer won't boot! BIOS? Reset it. CMOS Battery? In and Outed it. HELP!

The Athlon XP 2600 that runs at 1917MHz runs on an FSB of 166MHz and has a clock multiplier of 11.5 (166 X 11.5 = 1909Mhz).

So if you have a system bus setting of 200MHz and the clock multiplier is set a 11.5, you were running it at 2300MHz, which is seriously overclocking it.

The processor might not have been up to that much overclocking and died.

Find out what BIOS settings do before you change them!
 

2 more replies
Answer Match 42%

After my friend's laptop wouldn't run on battery power OR charge the battery I tried many "fixes."
 
Shockingly none worked that I found.
 
Only one thing worked for me to my surprise.
 
A last ditch effort was to open up the laptop (sony pcg-81114L) and disconnect the cmos battery for a few minutes to reset the CMOS.
 
To my surprise, when powered on, the battery instantly showed it was charging AND when removing the power plug the battery POWERS the laptop now! (and I'd thought I was wasting my time.)
 
Worked with an off brand battery also.
 
Many times this has saved many computers that have odd "unsolvable" things wrong with them.
 
Surely someone else has done this also but I haven't seen it posted anywhere to my knowledge.
 
Thank GOD for bringing the idea to remembrance!

A:sony vaio won't charge battery or run on battery power (CMOS BATTERY FIX!)

Hi askfault,
Do you have any information on how this fixes the battery problem? would be interested to know.
 
Xen

1 more replies
Answer Match 39.06%

Hi there

So I've got a 5 year old PIII 1000 w/256 RAM Asus CUV4X dual booting Ubuntu Breezy and WinXP.
About a week and a half ago I was using my machine in Linux and it locked up on me. I pushed the reset button and it started up fine...but shortly after it reset itself again. I tried again, and again it reset itself. I noticed that the delay at it was resetting itself was pretty random...sometimes it was a few seconds after resetting, other times it was nearly half an hour after the OS booted.
Left it off for a week and just turned it on tonight...went right into the BIOS to check the CPU temp. Seemed fine, watched it for a minute or so and then it then it reset itself (which led me to confirm this was not a software issue since no OS's had the chance to load). After that it began resetting itself repeatedly in half-second spurts, probably 10 or 12 times, and then stopped. I shut it off, turned it back on, and now all that happens is that I can hear the fans running, but no sound of the harddrives nor any output to the monitor. It's pretty dead at the moment.
Obviously some component is on the fritz here, but I have no idea what it would be. I don't think it's the power supply since the fans are running fine, and the CPU temp was OK. Wasnt sure if it could be the motherboard in some way...

I should also note that when I went into the BIOS to check the temp, there was a red notice message telling me to check my CPU settings because of a previous fa... Read more

A:Solved: Reset, Reset, Reset......Dead

16 more replies
Answer Match 39.06%

So, my y510p is having really anoying problem.  Sometimes computer works fine (really rarely) but usually it just doesnt start. I need to press powerbutton atleast 50 times until it finally start, and when it starts the screen is just blinking black and keys are blinking too, the problem becoming more general when it gets "cold" (Cold = normal indoor temperature 22 celsius) it also takes ages to get windows screen I have already visited warranty with my laptop and it was there 1.5 months, and they changed keyboard (why?!?!) and send it back, they said that they run some tests without any problems. Then i got my computer back, NOTHING CHANGED, same problems and all, what should i do?!  I have already soft-reseted, reseted bios and reseted whole system, nothing works!  Could you please be in touch with the store i bought it from, because I want my money back for not-working laptop worth 1200e in my country. They said that i need to send my computer back to warranty, for another 1.5 month journey (what is over what they promised, they said 10-15 workdays)  PLEASE HELP ME! anything but not another warranty trip! I also have very good video of the problem if you want me to send it to you.  My model is the one with 750M and 24gb ssd cache.











Solved!
Go to Solution.

A:y510p issues

up, i need help!!!! Lenovo you are just ignoring this, please answer..

8 more replies
Answer Match 39.06%

I installed Windows 10 last year and had to uninstall it due to wi-fi connectivity dropping.   Searching the internet, this seemed to be a frequent problem and Lenova did not support Windows 10 for the Y510P and did not provide drivers. I really liked windows 10 and would love to go back to it.    Is anyone running it, and how did you resolve the wi-fi connectivity issue?    I see on the Lenova Website they still don't list Windows 10 for this model.    Too bad.  Makes me really dislike Lenova products when they don't support OS upgrades.

More replies
Answer Match 39.06%

Hello, My Lenovo (end 2013 model) is dead. When I push the power button, nothing happens. I have checked the power supply - it is OK. Black screen, nothing happens. I have tried to connet to external screen. Nothing.Since I have seen that there are many postings regarding similar issue, is there a Lenovo action to fix this?

More replies
Answer Match 39.06%

Is it possible to overclock the GPU and CPU a lil' bit in my y510p ?? If yes, could you please tell me how much can i boost it up and if it's worth it though...?










Solved!
Go to Solution.

A:Overclocking GPU and CPU in y510p

If you use the Intel Xtreme Tuning utility you can adjust the multipliers but that is all. The CPU already runs way to hot (and throttles as a result) so overclocking it will only make it worse. I did the opposite and undervolted mine so not only does it run cooler but it doesn't throttle anymore so it actually runs faster then a stock one. 

9 more replies
Answer Match 39.06%

My fan is buzzing and there is no air coming outside so It is overheating (since may be like 3 months)I try to find a replacement to my fan but unfortunately didn't find one (in Egypt) so is there any chance to get one at any cost, As it is really important.I found y510 fan replacement (not y510p) so it will work or NOT ? And where can I get/order new y510p fan ??

More replies
Answer Match 39.06%
Answer Match 39.06%

My fan is buzzing and there is no air coming outside so It is overheating (since may be like 3 months)I try to find a replacement to my fan but unfortunately didn't find one (in Egypt) so is there any chance to get one at any cost, As it is really important.I found y510 fan replacement (not y510p) so it will work or NOT ? And where can I get/order new y510p fan ??

A:Y510p CPU fan replacement

Hi Mustafa_mah  , 
 
Welcome to the Community Forums.
 
Would you have the machine number ? Check on the machine number from the sticker or check it from here ,just keep your serial number confidential.
 
The same Parts look up page would also gave you the parts listing. Reference guide on disassembly on page 59 of the hardware manual similar to page 86 item 5.
 
5 VIQY1 Thermal Module(Y510p) part number 90202747
 
Using the part number may be able to help you search with the compatible parts as also indicated on the look up page by calling tech support and have you transffered to the parts sales department. This article discuss options to purchase FRU parts including quickpick option  or  other third party resellers .
 
Hope this help answer your query. 
Update us .
 
Regards

3 more replies
Answer Match 38.64%

My adapter was burned, and my computer has only one graphics card.Now I want to add another graphics card so I need to buy exactly the same adapter 120W?And where I can order new adapter.I am from Israel. thx

More replies
Answer Match 38.64%

I bought one of the first Lenovo IdeaPad y510p. Having a dual gpu made for a lot of gaming fun. Yesterday, the room filled up with the smell of an electrical burn. I checked the underside the Lenovo. It had been hotter. I heard workers outside my window and figured that the smell may come from them. A few minutes later very thick smoke came out of the left air vent and made a column in the air. I quickly pulled out the power cord and battery. Luckily, the house is still standing. I understand that electronics eventually fail. Yet, this seems unsafe and dangerous. What if I weren't in the room to act quickly? There should be some way to report this. The support page to send a message has been down with an under maintenance message for days.

More replies
Answer Match 38.64%

Hi all,
 
Last night, my keyboard suddenly decided it didn't want to work. The following keys rarely work (occasionally after hitting them a gazillion times): 0 (wow it worked just now), p (using on screen keyboard, now 0 is not working so I need onscreen to close these parentheses), colon/semicolon key, and slash/question mark key. 
 
I really hoe this is not a hardware issue as this comuter isnt even 2 years old yet, and having a functioning keyboard is kind of essential. Esecially when some of the affected keys are in your assword... Not sure if the 4 affected keys are connected hysically and thats why theyre acting u together, or if this could have something to do with the fact that the issues arose immediately after some Windows udates. 
 
I would immensely areciate any hel ! Thank you!
 
Mod's Edit: Additional information added to Subject line for clarity of issue.
 

A:y510p - keyboard problem

Hi Imjustaguy , 
 
Welcome to the Community Forums. 
 
Better to isolate hardware issue from software is to make the computer boot on a rescue media and try typing from it . Using an external USB keyboard and onscreen keyboard further isolate probability of a bad keyboard specially if same thing fails in BIOS (like test typing the affected letter in security password  but NOT to save it , for testing only) .
 
Update us how it goes. 
 
Regards
 
Mod's Edit: Updated Subject line.
 

1 more replies
Answer Match 38.64%

Hello guys, Im using Lenovo Y510P with the following specs:4th Generation Intel Core i7-4700MQ / 16GB RAM / Full HD 1080p 1920 x 1080 / 1TB HDD + 24GB SSD / Dual SLI NVidia GT750M 2GB / Bluetooth / CamI got this laptop from my brother, and i use it to play Counter Strike Global Offensive (CSGO) game. I have seen this laptop getting around 250fps in most of the maps in CS GO, but still I am getting only 124fps in every map with low settings. Can any of you guys suggest any tips to correct this?  Thanks in advance  EDIT: Does installing the OS on the 24 GB SSD affect the gaming performance in any way? My SSD got damaged and there is no SSD in it currently. The is only the HDD.

More replies
Answer Match 38.64%

Hey, I know there are already a few topics with the same subject, however none have the exact same situation as mine as most are US based. I too have a powerful Lenovo Y510P SLI with a Intel Centrino N2230 wifi card. I am buying a new router for my student room and since I want to buy things that can last for a few years, opted for a wifi AC router (probably an Asus one). But, this laptop won't support it... I looked in the technical maintaince manual to find which wifi cards are supported for the Y510P, there is one Wifi AC card for the Y410P, but according to various posts will also work in the Y510P as they share the same BIOS whitelist. I don't want to flash the BIOS with a custom modded one which removes the whitelist. (I flashed a desktop Asus motherboard to run OSX, went great, runs well, but I can't experiment with this laptop, need it for university.). So I Googled and Ebayed the partnumer and this one came up: Ebay Link, which says "Only for Lenovo/IBM laptops such as Y510P" should be fine right? Only thing is it is 40 USD, Dutch customs will charge 21% on top of it so that makes 48 USD, and the Dutch postal office will charge anywhere between 15-20 USD for paperwork for importing goods. So that makes an total of 68 USD... so that almost doubles the cost of the upgrade...  I used the FRU number for this card: WLAN, WiFi AC+BT4.0, Ltn BCM4352+20702 2x2AC+BT4.0 HMC which is 20200381, and put in the search engine in the "part number" ... Read more

A:Wifi upgrade y510p

Not sure bro, but my Y510p has Intel 7260. I think that one works well.
 
Have you tried to find that one?
 
The manual mentions these parts -
 
WLAN, WiFi 2x2 BGN+BT4.0, Intel 2230 BGN+BT M PCIE HMC 20200078
WLAN, WiFi 1x1 BGN, Cbt BCM94313HMG 1x1BGN HMC 20200102
WLAN, WiFi 1x1 BGN, Liteon HB125 1x1BGN HMC 20200223
WLAN, WiFi AC+BT4.0, Ltn BCM4352+20702 2x2AC+BT4.0 HMC(Y410p) 20200381
WLAN, WiFi 2x2 ABGN+BT4.0, Cbt BCM943228HMB 2x2ABGN+BT4.0 HMC(Y410p) 20200221
WLAN, WiFi 2x2 ABGN+BT4.0, Liteon WB222 2x2ABGN+BT4.0 HMC(Y410p) 20200225
WLAN, WiFi 1x1 BGN+BT4.0, Cbt BCM943142HM 1x1BGN+BT4.0 HMC 20200222
WLAN, WiFi 1x1 BGN+BT4.0, Liteon WB225 1x1BGN+BT4.0 HMC 20200224
 
Manual -
http://download.lenovo.com/consumer/mobiles_pub/ideapad_y410p_y510p_hmm.pdf

6 more replies
Answer Match 38.64%

Hello, for professional purposes I plan to upgrade the existing 8gbof available RAM on my laptop to 12gb or 16gb, depending on price range. I know next to zero about RAM consideration for optimal compability/performance. I uploaded two images of the currently installed RAM cards. There are still 2 slots available, could someone point me to recommended/compatible RAM cards? (If I can order it from amazon, the better). Thank you for the support.?  

























Screenshot (110).png ?158 KB

A:Ideapad Y510P RAM Upgrade

I'm currently considering this buy, could anyone consult me on this? (Compability/performance) https://www.amazon.com/Crucial-Single-PC3L-12800-SODIMM-204-Pin/dp/B006YG8X9Y/ref=sr_1_2?s=electroni...

1 more replies
Answer Match 38.64%

Hello, i have recovery disc from Lenovo for my y510p. I bought new external dvd rom, but when i have uefi mode. My computer doesnt boot DVD and when i have legacy mode and put there disk 2/1 i had ,,Recovery failed". Can you tell what can I do, please? My hdd is completely clean (i hope)

A:Y510p Recovery disc

How did you get a recovery disc?

9 more replies
Answer Match 38.64%

(windows 10)So i got this problem last week when i turned my laptop on and aafter few minutes of using it just beeped tow times and blue screen came with watchdog violation. After that i just did factory reset and installed updates for upgrading to w8.1 from factory w8. it worked  for a day or two. (windows 8.1) Now today when i got home i started up the laptop and same problem as with w10. So i found out from internet that it could mean my ram is failing? Is that it or what?

More replies
Answer Match 38.64%

So I have a Lenovo Y510P IdeaPad, I upgraded it to Windows 10 last December and wanted to downgrade it back to Windows 8/8.1 due to some issues that many said are due to the fact that the model doesn't really support Windows 10 thus I experience the problems. However, since it has been more than a month from the upgrade, I can't just roll it back to previous OS and am wondering if there is any way I can find out what my original product key for the pre-activated Windows 8 so I can perform a clean reinstall with it.
 
 
Moderator comment: Spoiler tag removed for readability. Model added to subject for clarity.

A:Y510P - Downgrading to Windows 8/8.1

If windows came pre-installed on your laptop, the key might be on its certificate of authenticity. Alternatively, you can obtain the key using third party softwares like ProduKey. It'll display the currently activated key on your system.

1 more replies
Answer Match 38.64%

Hi,I may be repeating the topic, but recently i had to revert back to Win 8.1, as the Track pad and later on keyboard also stopped working. Further I started to get random BSOD's always  giving new driver errors. So finally switched back to Win 8.1.Does anyone has a workaround for this so that I can upgrade to Win 10, as I think 31 July is the last date  for upgrading to Win 10 from Win 8.1, or stick with Win 8..1.Appreciate any help regarding this.

More replies
Answer Match 38.64%

Hello guysI have a y510p laptop with gt755m sli.I have modded my bios(with svl7's mod) and everything went fine but my default gpu's core clock shows 1098 and the ultrabay gpu's core clock shows 980.Also range of overcloking is wider on the default gpu than its on the ultrabayed one.I hope maybe one of you can make me understand the reason behind this and help me solve the problem.

More replies
Answer Match 38.64%

Power cycling is the best way I can describe it. Approximately once a day, my y510p will power cycle all of its USB ports simultaneously, this is the two USB 3.0 ports as well as the USB 2.0 port (which makes things even stranger considering they are on separate controllers). I will lose connection to all devices (for me an external hard drive, USB 3.0 dock, and USB 2.0 mouse) and they will all come up again a moment later as just being plugged in. It is not the same time of day each day. My drivers are up to date. This occurred under Windows 8.1 64-bit and Windows 10 64-bit. There is also no correlation to whether there is a lot of data moving through the ports or if they are just idle.

More replies
Answer Match 38.64%
Answer Match 38.64%

HiIt just "died" . When I try to turn in on using power button , or levono button - it's just blank , black screen. No keyboard backlit. No sound.I have tried starting with battery only , or without battery on psu only. Is is dead for sure , or there is some magic trick I can try ?

More replies
Answer Match 38.64%

Hey Guys,  I am lost. I got my new GT750m5, removed the DVD, added the new card and nothing. I tried reinstalling the Nvidia drivers and nothing. IT doesn't even show up in the device manager. I even have the new 170w power adapter plugged in and the power management set to performance. Any ideas?  I also tried uninstalling the Intel display driver, then the Nvidia display driver and then I tried just installing the Nvidia driver (both the provided lenovo Nvidia driver and the newest 331.65). I keep getting errors about needing an intel driver installed first. Suggestions?

A:New y510p sli card not detected

This sounds like my situation: http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/My-y500-laptop-cant-detect-second-y500-sli-...

9 more replies
Answer Match 38.64%

My Lenovo Y510p isnt working, Im on my phone but ill show a video of whats happenning: https://youtu.be/d1nhfJ3PUZ0So my laptop will only turn on for a few seconds before shutting back off and then trying tobshut back off. I cant go into bios, it still crashes after a few seconds. Also a weird thing is itll be stuck in that restarting loop until i plug my charger in and then it just wont turn on at all? It first happened a few months ago but i took it to the shop and they said i was working just fine. Worked for another month, and then did it again, and then it lasted yet another month now doing thia again. The same thing every time. I had it worling yesterday, somehow it just started spontaneously working, and then after shutting it off today it started to loop again. I dont know whats wrong with it??

More replies
Answer Match 38.64%

I have been getting a lot of "pauses" of late. Not hard on "freezes" but more of super long delays, causing me to force shutdown when I get desperate. I'm thinking that the hard drive might be failing, and so looking at getting a new hard drive, and finding someone to replace it. Ether having what can be kept copied onto the new hard drive, or perhaps put onto an external hard drive. I was hoping someone could give me insight/suggestion for this. I purchased the laptop around 3 years ago, and all warranties expired last year. ~~~~~ Lately, I will notice programs will stop responding. When I look at the Task Manager, it will show "Firefox (Not Responding)" for example, I can try and end task, but that has no immediate effect. If I try to open up anything else, it too "pauses" and may take a LONG time to open up. Messing with the task manager too much will cause it too, to stop responding for a long time. Eventually, Firefox will close, and things start behaving as normal. Though this can take 5+ minutes to never to solve its issue. I decided to check the event viewer and I'm seeing a lot of: Reset to device, \Device\RaidPort0, was issued.The device, \Device\Harddisk1\DR1, has a bad block. - This "pausing" has happened to me the last two times I've tried writing this post. During this last time I got a few different errors. "wuaueng.dll (1152) SUS20ClientDataStore: A request to write to the file "C:\WINDOWS\SoftwareDistribution\DataStore\DataS... Read more

A:Y510P Possible harddrive failure

I just want more info/clarification.1. What OS are you using?2. Are your drives in RAID configuration?3. Is your unit 501P or 510P?

3 more replies
Answer Match 38.64%

Hey, I bought Lenovo y510p laptop like 2 weeks ago. It is the SLI version of the y510p. The laptop worked just fine when I was playing with it, ran CSGO and Skyrim on Ultra settings over 60 fps. Couple days ago, my friend broke my charger, and I went to Walmart to buy a new one. I bought the Duracell charger which is 90 watts and it was compatible with my laptop. Then I plugged it in, and tried to play csgo but the fps was like from 5 to 15. I have no idea how this happened. I also took off my battery and just tried to play it without it and just charging the laptop, and when I opened csgo the laptop shut down. I already made virus tests and there was nothing in the viruses. Please help me if you can, I really wouldn't want to send this to the warranty since it's brand new and propably gonna take atleast a month. Thank you already!
Specs:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 8
RAM: 8138 Mb
Graphics Card: NVIDIA GeForce GT 755M, -2048 Mb
Hard Drives: C: Total - 913054 MB, Free - 795269 MB; D: Total - 25599 MB, Free - 16086 MB;
Motherboard: LENOVO, VIQY0Y1
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
 

A:Lenovo y510p slow fps

My guess is that the Charger may not be compatible with that laptop....90watts yes but has it got the correct DC output.

Also you didn't say how your original charger got broken. like was it attached to the laptop at the time?

What could be happening is..when you plug the new power supply in it is not the correct power your PC expects so it disregards it and runs off the battery at lower everything. As when you take the battery out it will not run at all. Easy place for damage is where the power plug goes into the laptop.
 

1 more replies
Answer Match 38.64%

Hello all and thanks in advance,I am at work right now but will give more info when I can, and forgive me if I put this in the wrong area of the forum. My Y510 is the top model with 16gb of memory, 1tb HDD + 24gb SSD and dual NVidia GT 755m SLI config. PROBLEM: My hardware seems to be slowing down dramatically. I?ve tried the typical startup repair and refresh from an installation media USB stick, and even the USB media takes forever to load and then hangs from screen to screen. The PC is about 2 years old and the only REAL modification I?ve done to it is flash a modded BIOS (hardware whitelist removed). The PC has been running strong up until a few months ago. It is normally used for school and hasn?t had any really heavy workloads in a while. I barely game on it and haven?t done so in more than 6 months. I haven?t been able to boot into my desktop for a couple of days. It takes hours sometimes. WHAT I?VE TRIED: Automatic startup repair: FAILRefresh Windows 10 installation while keeping files: FAILRan CHKDSK with no negative results. No bad sectors or fragmentationBootrec.exe /fixboot /fixMBR /scanos: SUCCESS. RebuildBCD: FAIL (finds the installation, type y for yes, then can?t locate it) SFC ScanNow: FAIL (can?t remember exact message)Removed SSD cache drive: Made it worse (I read this on another post and some people have had success with it but not I)Reset BIOS to default: NothingReseated memory sticks: No resultCompleted a 6 pack of IPAs: SUCCESS... Read more

More replies
Answer Match 38.64%

I have a Lenovo Y510p. My warranty expired over a year ago, but my screen recently broke. I've tried to repair it myself, but it still won't display properly. Every time I call Lenovo I get a message to "schedule a callback," and every time I go to schedule a callback the web site tells me I'm out of warranty and won't allow me to schedule a callback. Is there a way I can schedule a repair through Lenovo?
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.
 

A:Y510p - Out-of-warranty Repairs

Hi wristshot0 , 
 
Welcome to the Community Forums.
 
You may directly call in 1-877-4-Lenovo, 1-877-453-6686  for tech support to process an out of warranty repair .
They are open 24/7 so there would be an opportunity to get support on a specific time .
 
Update us how things go.
 
Regards

1 more replies
Answer Match 38.64%

My Lenovo Y510p isnt working, Im on my phone but ill show a video of whats happenning: https://youtu.be/d1nhfJ3PUZ0So my laptop will only turn on for a few seconds before shutting back off and then trying tobshut back off. I cant go into bios, it still crashes after a few seconds. Also a weird thing is itll be stuck in that restarting loop until i plug my charger in and then it just wont turn on at all? It first happened a few months ago but i took it to the shop and they said i was working just fine. Worked for another month, and then did it again, and then it lasted yet another month now doing thia again. The same thing every time. I had it worling yesterday, somehow it just started spontaneously working, and then after shutting it off today it started to loop again. I dont know whats wrong with it??

More replies
Answer Match 38.64%

Hello there, I have had my IdeaPad Y510p Laptop - 59369999 for 2 years without any problems, until today.  I started watching a video & everything froze for a good 5 minutes.  I held the power button until my laptop shut down, when I turned it on it said "scanning and repairing drive c". It started up normally, I gave it time, moved the mouse once everything had loaded & it froze again. Then the screen went blank with the cursor working, then the cursor dissappeared. Does anyone know of this is a simple fix? Thank you! 

A:Y510P Freezing After Start Up

My guess is that the hard drive is dying.  If it will start, try getting a copy of CrystalDiskInfo (free),  Otherwise, see if you can hook up the drive to another machine to test it and to get as much as you can off of it.

2 more replies
Answer Match 38.64%

Found a possible fix (workaraound) of the famous screen flicker problem. I've tried all of the proposed fixes found anywhere on the web and nothing worked for more than 5 minutes. I also sent it to be serviced, came back even worse.The screen would go crazy when showing high contrast images with a lot of black. The flicker was most prominent when testing the pixel-walk(inversion) on this website:http://www.lagom.nl/lcd-test/inversion.phpIf you have the same problem, try applying pressure on the LCD frame in one of the corners. In my case the flicker went away. I put a piece of fabric between the plastic and the metal LCD frame and after some fiddling I managed to find a sweet spot with no flicker.My laptop is y510p with 755M SLI and FullHD screen.Try at your own risk!Cheers

A:y510p screen flicker FIX!

Ok, I have an update. The flickering can be fixed with a bit of DIY. There's a band cable attaching the display circuit to the metal frame holding the LCD. This band is glued with some sort of conductive glue that goes bad over time, messing up the electronics somehow, I guess preventing the capacitors from discharging properly, dunno.Try and make your own conductive band, I made mine using aluminum tape, it works very well. No flicker noticeable for over a week.Once again, try at your own risk.

1 more replies
Answer Match 38.64%

Hoy guys i started to flash the bios update(downloaded from the lenovo support page where are the driver downloads) to my y510p it rebooted to flash the bios and it is stuck at 100 the cooler started to rush as Bolt on 100m but it didnt reboot 2 hours ago. Any suggestion what to do?

























IMAG0043.jpg ?1311 KB

More replies
Answer Match 38.64%

Hi, I have two question : 1. I bought a caddy for lenovo y510, but my Sandisk Ultra 2 ssd is only reconize as sata 2. Is there a sata3 or sata2 support? Is there any problem with caddy? 2. Also I was wondering if I can install a M.2 SSD. My laptop is still in warranty, I didn't open it. If yes, is worthy for daily use to sell my Sandisk ssd for a M2 ssd? Thanks!

More replies
Answer Match 38.64%

Hoy i have a problem with my y510p i started to flash the bios update from the supprt page and it is stuck at 100 the cooler started to rush as bolt on 100m but it still didnt reboot after 2 our. Any suggestion what to do?

More replies
Answer Match 38.22%

Hello,I have a laptop y510p that for some time now, not boot normally. When I try to turn it on, the screen is black, without turning up lenovo logo. Sometimes if I wait long enough it starts (mabe  after 15 minutes), but sometimes it not starting. I tried to remove the battery and power and give the command to start for emptying parasite energy, but did not resolved the probleem. Now, lately, it appears to happen this hard starting more often. I pulled out and ram, I tried to start with only one of the ram card, I reversed the order between them...
 
Please help
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

A:Y510p - problem starting laptop

Hi dudescuman , 
 
Greetings. 
 
Take the opportunity to back up anything that you would need from the machine. 
Running lenovo diagnostics with temperature checker would help isolate points of failure. 
 
BIOS and Lenovo logo should still appear even without a harddrive . 
How is the power LED and Battery LED status (page29) ?
Would pressing the caps and num lock on / off show any response from the leds?
 
Update us how it goes. 
 
Regards
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

1 more replies
Answer Match 38.22%

My computer was plugged into my TV via HDMI and my dog ran by, grabbing the cord and taking the laptop down with it. It looks damaged on the inside of the port and does not work. I have had the screen flash for a split second trying to plug it in but not even long enough to be recognized by the monitor.  I am trying to find out if this is something that can be repaired, or am I screwed? I use my laptop for presentations and meetings a few times a week, please let me know if there are any solutions.  I tried contacting customer support on Lenovo's website but received an error message.  Thanks

























20160630_194333.jpg ?3191 KB

More replies
Answer Match 38.22%

BSOD-xperts:
I've suddenly been afflicted with BSOD's on my Lenovo Y510P running Win 8.1. Everything was fine until about 2 weeks ago and then I started experiencing multiple BSOD's to the point that I had to boot in SafeMode. After doing some research, it looked like the issues were related to video (NVIDIA GeForce GT 750M) and wireless/bluetooth drivers. I upgraded all of those and everything was fine for a week until this morning when I got another BSOD. After looking for the bug check that it reported, I stumbled on this forum and saw some excellent responses so I thought I'd give it a whirl. I downloaded BlueScreenView and ran that and I've attached the output. I have also attached output from the MiniToolBox tool. I also tried to upload the mini-dump files but I get a message saying I'm "not permitted to upload this kind of file" but I'm happy to do so if I'm allowed to.  Here is a link the output from the Speecy tool as well - http://speccy.piriform.com/results/j7BzfFXyiX3xHgrhWQqHjXV. Would someone be so kind as to give it a look and let me know your thoughts? Thanks!
 

 

A:BSOD in Windows 8.1/Lenovo Y510P

Can you please upload the whole minidump so I can examine it?
 
It is located in C:\windows\minidumps. Select the most recently created file.

3 more replies
Answer Match 38.22%

Hi Guys! Newbie here, Need your opinions,suggestions etc ive been using this laptop for almost 2 years,now this happens, i already tried all the possible way to fix this but nothing helps, is this now a hardware failure?do i need to change the keypad and trackpad? and how much it will cost? i live here in dubai, and is there somebodycan tell me where can i find a lenovo service center. ThAnks in advance-paxs-

More replies
Answer Match 38.22%

I have the y510p with the GT 750M SLI. My charger died on me, and I tried to order one via Amazon provided by a forum thread here a while ago, to only receive an adapter with a 45N0112 modeL number when my adapter is 45N0111.  Tried to to purchase it off Lenovo the other day to which I get an email that the product is "end of life" and now they've taken down the listing. So do tell me Lenovo... How am I to use my laptop without the 170w charger that you provide? No universal charger has that wattage. How the heck could you just shelf something like a charger after its only been about 3 years? I mean I thought your company was fantastic but what the heck man. Do enlighten me as to a guaranteed place to get a 45N0111 charger!!! I haven't been able to use my laptop for a week! Why? BECAUSE I CANT BUY A CHARGER. THANKS.

More replies
Answer Match 38.22%

I feel like my laptop is getting a bit hot these days. I get 57+ C on all CPU cores and around 50C on the GPU.Last I checked the gaming temps could go upto a 97-98C on the GPU. Is this normal?

More replies
Answer Match 38.22%

I understand this is a long shot, due to number of possible software variables, but I need help, as this is becoming a more and more frequent problem. I have a y510p. It is running Windows 8.1, haven't jumped to 10 yet. I run pretty average software - Google Chrome, Microsoft Office, Adobe Photoshop and Illustrator, obviously a few other things.  I've been having a problem where for reasons I do not understand the laptop, which I bring around with me in a backpack, has been waking up after I disconnect from power and USB dock and close the lid. I don't know when it wakes up, or if it just isn't sleeping at all, but it is quite problematic in that it will at the very least just drain the battery every night and worse it is just cooking and cooking in the backpack.  I know it is a stupid thing, but I do find it a tremendous nuisance to sit there and stare at the status LEDs every day when I'm ready to go home just to make sure the stupid thing has absolutely gone to sleep. Control Panel - Power Options are set to sleep on Lid close (tried Hibernate on Lid close, no better result), and this even happens when WiFi is disabled in Control Panel - Network connections. The Always On USB port is also disabled in BIOS.

More replies
Answer Match 38.22%

I have a lenovo y510p ideapad laptop. Using windows 10. A few days ago I created a password in a different language. Every time I opened the laptop I had an option to change languages and enter the password. Suddenly the option has dissappeared and I cannot seem to find a way to change languages in order to enter the password. Any ideas to solve the matter asap plz??

More replies
Answer Match 38.22%

Hello! I'm using my Y510P with an external display and thinking about buying another one, so here's my question - how many displays are supported by the GPUs? According to the ark.intel.com, my CPU supports up to 3. Is it including the laptop's screen? I'm planning to use ONLY two externals. Specs:i7-4700MQ755M SLI16 GB RAMWin10 x64Benq GW2270 

More replies
Answer Match 38.22%

I purchased my Y510P back in Q2 2014, it was already on Win 8 when I purchased it. Everything was working fine even after the  SLI issue with  Win 8.1 which was fixed through a BIOS update that was available here in their product support page. During that time I worked more on other things and didnt really notice anything about the GPU and its update. I was able to update my laptop to Win 10 (back in Q4 2015) and I'm currently unsure if it already installed the anniversary update. Recently, I tried some few games and noticed that the second GPU seems not be working during any games I've launched. I ran Unigine Heaven Benchmark and seems that the SLI is detected, checked the device manager both hardwares are detected, and updated to the latest GPU driver. But still seems to be not working. Any help will be highly appreciated. Thanks.

More replies
Answer Match 38.22%

Hello, bear with me because it is quite a long confusing story. I have recently send the y510p away to get the screen repaired. Because I needed something to work with meanwhile I took the SSD from y510p and put this in an older laptop with a clean install of windows10. In the y510p I put an old HDD with Elementary OS installed on it. Today I received the y510p and turned it on, the screen worked perfectly and I could use the Elementary OS installed on the HDD. I then took the HDD out again and put the SSD in, I was planning to do a clean install on it again but it still had windows 10 installed from the older laptop.I put everything back together and powerd it on, the screen lights up but remains black.I hooked up an external monitor through vga and saw that the windows 10 had booted from the older laptop.When I try to get in the bios (I think it's F2) both monitors remain black. I have the feeling it goes to the bios, but cant display it on the monitor? (I cant find a way to display the bios on the external monitor.)Could it be that the motherboard doesnt recognize the new screen? At the moment the only way to get any visual on the main monitor is to boot Elementary OS from the old HDD. Please help for I have no other ideas. JTADDED: I can currently use the SSD with w10 on the y510p through the external monitor. But I would like to do a clean install and ofcourse use the main monitor aswell(The main monitor does not appear i... Read more

More replies
Answer Match 38.22%

Hopefully this'll help some people thinking of upgrading . NOTE: Some people are having issues with wireless cards after upgrading. I'm not sure of solution yet, but I would recommend predownloading the Windows 10 drivers from Intel's website before the upgrade. - So far drivers have not solved issue. Not sure of solution yet. Everything went smoothly for me. All fiels, programs, drivers, and settings transferred from my Windows 7 install to Windows 10 (and also from 8.1 to 10 on my Dell, so I assum it'll work on a Lenovo too). Upgrade process was painless and took about 20 minutes. Only temporary issue was video drivers, but that got solved later. Make sure you check for updates in Windows Update right after you upgrade; there's a day one patch they put out and it fixes quite alot of bugs (1GB of them actually). This fixed any driver issues I had and made my screen resolution normal, as it was previously running 800x600 or something, so don't freak out if your screen look weird at first. It automatically changes your default programs though, so if you use Chrome or Firefox you'll need to change it back to that from the new Edge browser. Otherwise, most settings were imported. So far I have found nothing that is incompatible with Windows 10 on my computer; however, beware that you will need to reinstall your anti-virus when Windows prompts you, as it is uninstalled prior to the upgrade. Doesn't cause any issues though and your computer is not at risk ... Read more

A:Guide(ish): Windows 10 Upgrade (Y510p)

Good post and please keep it updated if you find something more.
Which antivirus did you have?
Is your Wireless working fine? Has it improved?
Are the lenovo apps working fine? (Energy manager, Dust cleaning)
 
As of now, I will prefer to stay with Win 8.1 due to several mods ( i have applied) and the stability that it has for playing games.

9 more replies
Answer Match 38.22%

I recently got my Y510p Ideapad's charging port replaced due to it getting fried. Ever since then my Y510p has been charging however it doesn't register that it is chargingThis is a problem because the GT 750M within the laptop wont turn on unless the laptop registers that it's charging.I am using the correct charger with the correct voltage, etc Is there anyway to fix this issue or at least force the GT 750m to work without having it register the computer is charging? Thanks!

A:Y510P doesn't register it's charging

Hi Keanane , 
 
Welcome to the Community Forums.
 
Would you be able to use GT 750m by removing the battery and just running it on the ac adapter, as this would be a way to bypass battery start up of the GPU ?
 
With the charging issue :
1. Uninstall Microsoft ACPI Compliant Control Method battery from the device manager . Turn off 
 
2. Remove the battery and unplug the charger , press and hold down the power button for 12 seconds to drain remaining charge within. 
 
3. Plug in charger and place battery back . press the Novo button (item1 page 7) instead of power to turn on . Choose BIOS setup on the novo menu . Press F9 to reset BIOS default , F10 to save and exit .
 
4. Check how battery is charging , if same issue proceed uninstalling Lenovo Energy Management tool from control panel's Programs and Features . Turn off and restart , check again on battery . 
 
5. To reinstall back Energy management , download and install from the support site under Power management tab after choosing the correct OS for you. 
 
If the issue persist after doing this steps , you may call in tech support for further recommendation and assistance like BIOS update (available on support site) or possible service
 
Further reference on this article. 
Update us how things go.
 
 
Regards
 

1 more replies
Answer Match 38.22%

How many of you have been unable to get the maximum performance of your system? Experienced nvidia driver crashes when playing on SLI? A lot have tried: Different/older driversModded BIOS and vBIOSUndervolting CPU and/or GPUPhysical cooling modsUnderclocking the Core clocks of the GPUSetting the TDR delay limit to a higher valueDifferent Nvidia Control Panel settingsDifferent OS'sI think I finally have the solution for you.Download Nvidia Inspector - I use version 1.9.7.2 even though there are newer ones (it's the only one that lets me force P-states)Open up Overclocking and choose your second GPUSet the Memory Clock offset so that your effective Memory Clock equals your RAM clock. i.e My RAM runs at1600MHz and my default GPU memory clock is 2700MHz, so i put the offset at -1100MHz.Apply Clocks and VoltageThe app would need to be started every time you want to play though, so please be careful of that. You can make a shortcut of the clocks using the program and then just start the program and execute the Clocks shortcut before playing. I had been struggling with playing CS:GO on SLI for 1.5-2 years maybe. I had resorted to playing with SLI off, but always knew I could get more FPS if I just managed to get SLI to work. And now it does. Enjoy your 300 FPS, guys. My hardware: Lenovo y510p LaptopMatte LCD screen (overclocked to 80Hz, if you're an owner of the glossy screen, you can OC to 100Hz)i7-4700MQ2xGT755m (I don't know if this will work for the gt75... Read more

More replies
Answer Match 38.22%

I have the lenovo y510p (59370015). It has a disk drive in the Ultrabay. Does this mean that there is no Nvidia graphics card in the laptop? If this is the case, then why are there a bunch of Nvidia files on it? If this is not the case then how do I get the card working, I see it with a Error Code 43 in device manager.

More replies
Answer Match 38.22%

Just realized my dvd drive does not play DVDs since I upgraded to win 10. It doesn't even recognize dvds, showing me only a desktop.ini file instead. It plays CDs just fine and it burns DVDs as storage device, though it **may** only be burning them as a CD, haven't really tested it. I would like to get an updated driver from lenovo, but I can't get past the Q&A session, it either doesn't know my laptop or thinks I'm running win 8.1 or 7. Any help would be appreciated. Thanks Mike

More replies
Answer Match 38.22%

Hi,   could some one help me,  my y510p is not recovering after I tried to update bios?I installed the system, and during driver installation on W7 OS I tried to update my bios and after all the installation when it restarted the start up stopped saying check cable connection.  Pxe-mof: exiting Intel pe rom.  No Bootable device - -  insert boot disk and press any key.  I tried several time to restore default bios options and restore legacy option but it is not working.  In bios it appears only 8giga had.  Any idea what to do? 

More replies
Answer Match 38.22%

I have the lenovo y510p (59370015). It has a disk drive in the Ultrabay. Does this mean that there is no Nvidia graphics card in the laptop? If this is the case, then why are there a bunch of Nvidia files on it? If this is not the case then how do I get the card working, I see it with a Error Code 43 in device manager.

More replies
Answer Match 38.22%

So, I just noticed this and it has been going on for quite a while I think, the fan on the right side of my laptop is not working. My laptop is an ideapad y510p. The fan not working causes my gpu to go upwards of 75c and I have no clue how to cool it down or make the fan even work in the first place. Any help would be appreciated

More replies
Answer Match 38.22%

Hi there,I've got lenovo y510p(with sli) about 6-7 month ago.I'm trying to play cs go but while im playing with sli on, game is crashing ( something like stucking or teasing i should say, and then there being bzzzzzz sound on the background just like when you are trying to change resolution). Im being able to press ctrl+alt+del and close the cs go or sometimes it doesnt even let me do it so i gotto close pc with power button.As far as i know its not happening on other games.My all drivers are up to date.I monitored the both graphic cards' heat and and they are usually 60-65C degree.Power charger is 170w.At this point I don't know what to do. I was looking for an answer for this problem in internet but couldn't find one. Can you please help me? Pc Specs Os :Win 8.1 pro 64bitBios: InsydeH2O Version 03.73.0674CN44WW(v3.05)                Processor: i7-4700MQ 2. 40 ghz           Ram : 8gb              Graphic cards : 2xgt755 one's brand is samsung other one's is hynix

A:Lenovo y510p cs:go is crashing while playing on sl...

Hi AnnoyingPear,
 
Welcome to the Forums      
  
As per the query we understood that you are facing issue with system crashing while playing games in your Lenovo Y510p laptop.
 
As you have mentioned that this issue does not occurs in other games, please uninstall the game and reinstall and check for the issue as this looks like it is a issue with the game.
 
Hope this helps. Do post back if the issue persists!                                                   
 
Best regards,                                                          
 
Ashwin. S




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter... Read more

9 more replies
Answer Match 38.22%

Hello guys,  I bought my Lenovo y510p for months ago, tried with several SLI games to run those. They all crash, and returns the screendriver has stopped working. I have the y510p with GT 755m sli. Any solution for this?? If I run without SLI all is working good.   

A:Lenovo ideapad Y510p SLI Crashing

Have you updated your video card drivers with the latest drivers from the Nvidia website?  Have you monitored your GPU temperatures to see if either of your GPUs are overheating?  You can try using GPU-Z to monitor your GPUs while gaming.

9 more replies
Answer Match 38.22%

I received a few minor electrical burns while typing today.  It turns out that the shield of my cell phone charger USB cable was making intermittent contact with my forearm and shocking me.  Not enough  to do actual harm, but it certainly doesn't feel good. After a bit of experimentation I found the following:1) Touching the USB cable results in a shock only if my wrist is in the typing position on my y510p.2) Either the laptop's power cable or its external monitor HDMI cable have to be plugged in to receive the shock.  Disconnecting both renders the device safe.3) This happens with 3 different cell phone chargers that I tested with.4) I don't need to be touching any keyboard keys.  I do need to have my wrist firmly against the laptop. Additionally, my external monitor has been flaky for a few months - it will flash off for a few seconds several times a day. What should I do next?

More replies