Tech Problem Aggregator

touch screen doesn't work

Q: touch screen doesn't work

Hi,thanks a lot from hp companyI bought hp envy k212ne last week and I removed ubuntu and I installed windows 8.1 and I downloaded all of the drivers for my laptop from hp support .In addition before I install drivers in my laptop , I saw pen and touch in my control panel , but now it isn't there.Then I went to device manager (Human Interface Devices ) but I didn't saw HID-COMPLIANT TOUCH SCREEN ,there.So I need your help .Plz help me.

More replies
Answer Match 84%

I just purchased this laptop yesterday, 9/12, and it was working perfectly fine until today. I was working on it and the touch screen stopped working so I can only use the keypad. I'm wondering if something went wrong with the laptop or if it can be easily fixed!!

More replies
Answer Match 84%

Hi,thanks a lot from hp companyI bought hp envy k212ne last week and I removed ubuntu and I installed windows 8.1 and I downloaded all of the drivers for my laptop from hp support .In addition before I install drivers in my laptop , I saw pen and touch in my control panel , but now it isn't there.Then I went to device manager (Human Interface Devices ) but I didn't saw HID-COMPLIANT TOUCH SCREEN ,there.So I need your help .Plz help me.

More replies
Answer Match 84%

The touchscreen on my Yoga 260 isin't working. I first noticed this problem when the screen was acting wierdly. When you tap on your yoga a light circle appears and fades over time to mark or show where you tapped and when you swipe a trail or tail appears behind of where you swiped then disappears over time. So when I opened my Yoga these taps and swipes were appearing all over the screen ramdomly in a very rapid pace. So I restarted my Yoga and saw that the swipes and taps were still there. So I chose to restart the Yoga again and the taps and swipes dissapered. After that I noticed that the touchscreen became unresponsive but the computer runs as normal butthe screen is unresponsive. Before I discovered the problem I could remember dropped the computer a small height but caught it. If there's a solution to this problem I'm happy to listen! Thanks. 

More replies
Answer Match 84%

I just purchased this laptop yesterday, 9/12, and it was working perfectly fine until today. I was working on it and the touch screen stopped working so I can only use the keypad. I'm wondering if something went wrong with the laptop or if it can be easily fixed!!

More replies
Answer Match 83.16%

Hi Guys...I'm using the Lenovo multi touch driver for my X61T. With Windows 7 build 7000 the same driver when I wake my laptop from sleep the touch screen works. Starting with build 704x (i can't remember the exact build but it was the first leaked x64 build) when I wake the machine from sleep the touch screen doesn't work (both pen and finger touch)

I have tried to change USB settings but I haven't seen any fix. A restart of the machine means the tablet works again. Any ideas about a patch until Lenovo makes new drivers for Windows 7?

A:Touch Screen doesn't work out of sleep

There is a registry patch for better USB connectivity after waking from sleep, available from Lenovo.

Lenovo Support & downloads - Registry patch to improve USB device detection on resume from sleep for Windows Vista - Notebooks

How's the touchscreen working for you? Hope it's great! I don't like touchscreens because the screen can heat up and flicking your finger around on it can really burn.

4 more replies
Answer Match 82.32%

Screen was cracked so I replaced the screen. Now touch doesn't work.
There is no "Pen and Touch" and "Tablet PC Settings" in Control Panel. In PC info it says, "No pen or touch input is available for this display."
Touch DOES work on LINUX as I ran it from a usb drive, so it is not a hardware problem.
I have reinstalled Windows.
I have another Yoga 2 Pro and comparing Device Manager in both I see no differences.
How can I get the touch to work again?

A:Why doesn't my Touch work after replacing the screen on my Yoga 2 Pro?

try refreshing your PC maybe the driver is not working properly
If the touchscreen does show up on the device manager try updating the driver from there. (it will be listed under HID )
​Otherwise To refresh your PC Swipe in from the right edge of the screen, tap Settings, and then tap Change PC settings.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, click Settings, and then click Change PC settings.)Tap or click Update and recovery, and then tap or click Recovery.Under Refresh your PC without affecting your files, tap or click Get started.Follow the instructions on the screen.

3 more replies
Answer Match 82.32%

I bought a windows 8 hp pavilion touchsmart and touch screen worked. I updated to Windows 10 and it worked, only after I did a factory restore did it not work. I've tried everything with the device driver and another factory restore and it still does not work. I sent my computer in to get it fixed while it was under warranty and it was still not fixed. I resigned to it not working and I think that hp should have solved this problem before selling its computers. So we are blaming it on Microsoft 10, but that is not the issue when it worked until I did a factory restore and attempted everything suggested. I have a 350 dollar piece of **bleep**. Plus now my Mic isn't working and there aren't any drivers for me to upgrade to, anywhere.

More replies
Answer Match 82.32%

i upgraded to windows 10, and surprise surprise my touch screen is gone.   no drivers, no hint of it anywhere on my pc settings,  i tried finding a link on HP's website to redownload the software, no such luck, you would think for such a common problem hp and microsoft would get there act together and provide a patch.  Any ideas anyone. thanks

More replies
Answer Match 79.38%

I have the issue that the touch screen + front camera + back camera + windows button on the screen are not working.

I tried installing the display/graphics drivers but that did not helped.

I bought this laptop from Saudi Arabia and it is still under warranty but I am out of country so i cant claim the warranty as well.

someone please sort out this issue and tell me the solution or tell me what i should do?

Help will be really appreciated.
some details about my laptop:

Toshiba Satellite U920T-B919.
windows 8.1 update 64 bit.

Thanks,

A:Satellite U920T - front/back cam + touch screen + win button doesn't work

Since you mentioned different issues with your notebook, I think that in this case its advisable to recover the notebook back to factory settings just to check if all these problems are related to system problem.

Regarding the webcam: the Windows 8 /8.1 already contains the webcam drivers and therefore additional webcam driver installation isn?t possible. Additional webcam driver does not exist simply.

From my point of few the whole description smells a little bit like a hardware problem of the upper slide part where the touchscreen is part of.
The win button as well as the both cams are located there and probably there is some lose connection between the two parts (touchscreen and keyboard)

Anyway, as I said above, its advisable to recover the notebook to factory settings just to ensure that the system isn?t the troublemaker.
In case of hardware problems, you would need to get in contact with service available in your country.

7 more replies
Answer Match 70.56%

Hello,I am desperate for help. My laptop will turn on. And I can type in my password. But then when the computer loads it takes a very long time and when it gets to the desktop the keyboard, the mouse, the touchpad, and the touch screen won't work. I can see everything on my desktop. But I cannot open anything or do anything at all. How can I fix this?Thank you!!!

More replies
Answer Match 69.72%

Touch pad doesn't work if you close and open the laptop, sometimes the touch pad turns off on it's own. I have checked the settings for the touch pad and for what the computer does when closing the lid, they are correct. Tried booting in safe mode and still had same results. The only way to get the touch pad to come back on is if you reboot the computer. Any ideas?

More replies
Answer Match 68.88%

So recently my laptop Pavilion DV6xxx updated the OS to Windows 10 64 bit and for some reason the touch pad works, but the scrolling system i.e. the designated scroll bar partition doesn't scroll any more. I have the Synaptics Pointing device software and my system is up to date in drivers yet it doesn't work. Please help as not being able to scroll with the touch pad is a huge inconvenience.

More replies
Answer Match 68.88%

Hello! I've just installed Windows 7 Professional on my HP 350 G1.  I have a problem with touch pad - it works, but just as mouse (and also installed as mouse). I've tried to update and downloaded synaptics driver, but it failed to be installed. I can't delete previous version of Synaptic driver and installed a new one, because it's not in Programmes list at all.  Windows Update doesn't work as weel, if it's relevant.

A:Synaptics touch pad doesn't work

 Hi, Install the driver from the device manufacturerhttp://drivers.synaptics.com/Synaptics_v17_0_19_C_XP32_Vista32_Win7-32_XP64_Vista64_Win7-64_Acme_Inc...

2 more replies
Answer Match 68.88%

hi recently my laptop has had a problem concerning a update from microsoft and has been restored to an earlier point before the update. Now my touch pad won't work so i got to connect a mouse every time i want to use it is there any reason it won't work concerning drivers or is my touch pad broken...

Thanks in advance
Xeno
P.s. its a sony vaio with vista installed intel dual core 1.67ghz
2Gb ram
120gb of hard drive space
im ussually good at fixing this kind of stuff but its my first time using vista
 

A:Laptop doesn't work with the touch pad

Did you reinstall the drivers/software?
 

1 more replies
Answer Match 68.04%

Hello everybody.

I got an ASUS N50Vn aka X5AVseries..

On the top of the keyboard I got a "touch panel" where I can control the volume, change the computers performance and so on.

But after installing Windows 7 it doesn't work.

Anybody knows what to do? Maybe a speciel driver I need?

Thanks, Peter.

A:ASUS - Touch Panel doesn't work?

You have to install all the acpi/she drivers from asus's website. You can use the vista or xp drivers.

(had to do this on an 1000he from asus, but I got almost all hardware keys working)

9 more replies
Answer Match 68.04%

Hi, Please help! I updated to window 10 this evening and things seemed fine. I dowloaded a few apps and restarted the system. Whe the system came back - the cursor wouldn't leave the top of the screen - just flickering aroung the top edge. The keypad works, as do the left and right clicks and the pointing device, but I fing he pointing device imposible to use and as soon as either the touchpad is toched, or the pointing device is touched at the same time as the left and right clicks - the cursor goes straight back to the top of the screen (where the close button is) As I am sure you can understand - this is all but unworkable. I have looked to se if the driver needs updating - it doesn't. Can you help? Richard











Solved!
View Solution.

A:Updated to Windows 10, now touch pad doesn't work

I manually reinstalled a windows 7 software for synaptics (none later available) and is currently working. Will keep my fingers crossed.Thanks for your help

10 more replies
Answer Match 68.04%

hi
i have dell inspiron n5010
i want to disable its touch pad but cant figure it out
there is a touch pad disabling button (right beside f12 key) but it doesn't work

can anyone tell me how to do it cuz it gets really irritating sometimes.

thank you in advace
 

A:Touch pad disabling button doesn't work

Touchpad problem

Hi. I don't know about a button to disable the touchpad on a laptop, but there is a free program that will do the same thing, so you can type away, and your arm won't move the cursor around. Try http://code.google.com/p/touchfreeze/
 

9 more replies
Answer Match 67.2%

Yesterday I reinstalled Windows 7 on my notebook PC. I had to use a Microsoft installation disk because unfortunately, serious errors resulted after I installed from the HP recovery program. Consequently the HP drivers that were installed automatically with the recovery program weren't installed on my system. I had to install several of them from the HP support site. I got everything to work except for the Touch volume control, or the Volume Scroll Zone as referred to by HP in the service guide. This is the device located just above the keyboard that increases or decreases speaker volume when you drag you finger on it. I installed the Quick Launch button driver but that only applied to the mouse and pointer touchpad. I looked at the devices listed in my startup configuration. I saw the synaptics pointing device and the HP quick launch buttons listed. So is the IDT PC audio driver.  What am I missing? Where I can I find it to activate the touch volume control?

A:Touch volume control doesn't work on dv6, looking for driver

@accordeoniste Try these. http://ftp.hp.com/pub/softpaq/sp48001-48500/sp48425.exe http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46731.exe REO

2 more replies
Answer Match 66.78%

Hello, My laptop is HP Pavillion DV6875se with Windows 7 OS. It was working great before a month, but all of a sudden the following issues came up1. The power button of the laptop doesn't turn on/off the laptop. I have to use a detachable remote to turn the laptop on. I don't see blue light on the power key, once the remote turns the laptop on.2. The quick play touch sensative keys above the laptop key board have blue light in most of them. But its flickering red for volume, and no indicator on the volume increase decrease touch region. Though some have blue indicator, red lights....none of the touch sensative keys function at present.3. The laptop touch pad is unresponsive. It has its blue light, which doesn't turn red even if the touch pad is locked. I use a USB mouse as of now.4. Laptop has 3 audio jacks. One for microphone, and 2 for headphone. The external speaker doesnt have any sound, so i have to plug in earphone everytime to listen anything. In control panel --> under sound --> playback ---> i see speakers and realtek digital output ---> both show green oscillating bars when an audio is played. But the volume key in quick play tab is flickering red all the time. The laptop is fully functional. But it would be great if the problems mentioned above gets fixed. Sincerely 

More replies
Answer Match 66.78%

I have been facing this issue from the day one since I installed Windows 10 on my laptop (Dell XPS L502x).

Native Windows Applications like all browsers, office products etc. anything that is not from the Store, works fine. I can use Touch Pad scrolling with no trouble. e.g. on Internet Explorer, Chrome, MS Word, etc.

But the apps that come out of store or the apps like those which come pre-built with Windows 10 such as new Settings UI, Microsoft Edge. Touch Pad scrolling just don't work with these apps. When I perform scrolling the scroll-icon appears but doesn't scroll the content.

This issue is only with Touch Pad. External Mouse works great with scrolling on any kind of app.

Hope to find a solution here.
Thanks

PS: drivers are all good on the machine and up to date with no warning or error.

More replies
Answer Match 64.26%

I have a Samsung series 7 Slate, which works great and is really fast with Windows 8. But with one piece of software the touch screen doesn't work, the menu items will light up but nothing happens when you press them. If I use a mouse it works fine and as it should. I don't think it's the software because I also used it on a HP 500 Slate and the touchscreen worked fine on that.

If anyone has any ideas for a solution to this problem I would much appreciate it.

Thanks in advance for any help.

A:Mouse works but touch screen doesn't!

There is a bit of a glitch when using older touchscreen hardware with windows 8.

Nearly all older touchscreen hardware is implemented as an mouse emulator. So when pressing on the screen it simulates a mouse click.

Windows 8 makes use of the touchscreen interface rather than the mouse interface for touchscreens, and the driver it installed for your touchscreen (if it installed one) may not be working too well with the hardware. If you install a driver separately for that touchscreen you may get back the mouse emulation for the touchscreen, but then some of the better options like gestures and sweep scrolling may not work well or at all in windows 8.

So what you really need is a touchscreen driver that is really a touchscreen driver (not a mouse emulator driver) for that model of touchscreen on your slate. If you know the touchscreen manufacturer you can maybe find a beta on their site for Windows 8? Find the touchscreen device in the hardware control panel and look up it's VID and PID to find the manufacturer if the driver page doesn;t already tell you. (There is a website somewhere that'll look up the VID/PID and tell you what the product and manufacturer is)

But.. may be slim chance. If not, try finding the normal windows 7 touchscreen drivers for it, that may help some, though not guarantee it'll be fully functional.

4 more replies
Answer Match 62.58%

I have an ASUS notebook running windows 7 64-bit. I am using the QuietOffice power profile, however the screensaver won't kick in no matter what I do, and the display does not turn off even though I set it to be after 5-minutes of inactivity. I don't know if there is something running in the background... I have turned off my usb wireless mouse, and nothing....

Any ideas?

THanks.

A:HELP: power option doesn't work - screen saver doesn't start!

This is another case of factory bloatware interfering - in this case a useless factory utility overriding Win7's superior built-in version.

Googling the Quiet Office feature of Asus there are multiple reported problems. Best to default to the Win7 built-in Power Options in Control Panel. Set up a Balanced Plan unless you're a gamer then use High Performance.

Here are other tips for cleaning up factory bloatware

5 more replies
Answer Match 62.58%

so heres the deal i have a imo touch screen that i use as a main screen (dummie) and when windows 7 uploads it doesnt show the windows symbol the screen is black until the windows startup sound comes on and the main destop comes up . is there a way i can change this in DOS so my usb touch screen will work before windows boots. i have a VGA flip down that i havent installed yet and i was hoping to get the touch screen to work in DOS

A:can a touch screen work in dos

OK, if I read that right, you are missing the Windows 7 Boot Animation. I'm not sure if these links will help but its some place to start.
No windows 7 boot animation
No boot animation for Windows 7? [Archive] - My Digital Life Forums
Oh, thats not DOS, there is no DOS in Windows 7. There is a command shell that you can launch from Windows but its not DOS. The first text based screen you see during boot up is the BIOS POST screen and or your Video cards BIOS screen.

7 more replies
Answer Match 62.58%

my lap top
HP Pavilion TouchSmart 14-n033tx Ultrabook (ENERGY STAR)
Model #: F2C48PA
windows  8 64
delete windows and recovery and install windows 10 64
touch screen not work no drive found in web site hp
all vido in youtube see but not work
 
 

More replies
Answer Match 62.58%

I have an HP ENVY TouchSmart, Windows 8.1 and 64-bit operating system and yesterday my touch screen was working fine, and today I turn on my laptop and it doesn't work at all. Keyboard works fine, mouse works fine. everything but the touchscreen. I thought it could be complications from a very recent update but It was updated on the 17th. Under my system information it says, "Pen and Touch: No Pen or Touch Input is available for this display". I don't know if that's unusual. I've restarted it, and tried steps to fix the problem like "calibrate my screen" but i can't seem to find the settings to it. In my Device Manager settings, I can't seem to find anything relating to touchscreen software, if there is any? I take good care of my laptop but I don't know the first thing about it. There is no damage to it.  When troubleshooting Hardware and Devices, "The driver for eGalaxTouch EXC7910-1037-11.01.01 is not installed."...Problems found: eGalaxTouch EXC7910-1037-11.01.01 doesn't have a driver-Not fixed. Hardware changes might not have been detected-Detected. I've checked if anything neds to be updated. I dont know what to do from here. Is there anything that I need to install? 

More replies
Answer Match 62.16%

any driver for touch screen can work on win 10 for acer_aZ5610

More replies
Answer Match 62.16%

Hi, i had my motherboard replaced due some manufacturing fault. When i got my laptop back it wasn´t working quite well so i decided to reinstal operating system. I used Backup button and restored my laptop to initial settings. This got me properly working laptop with win 8.1. Afrer i upgraded to win 10 my touch screen stoped working so i did a little research and found some topics with similar problems but any of those  didn´t solve my problem. ? This is screenshot of my deice manager, that unknown USB is my touch screen ( it says: unknown USB device (descriptor request failed)). I tried uninstal this driver, when i do that my touch screen starts working for like 3 seconds and than it stops working again. By the way this is rare to see box called HID in my device manager usually it doesn´t even show up. I tried update drivers through windows update. That didn´t change a thing so i update almost every driver manually (i download all of them from official lenovo support site) . And guess what, that did not worked eather. I am not sure which other solution i tried, because am trying to solve this problem for quite long time, but i feel like i tried everything (even reinstaling win 10) and didn´t even get close to solving this issue.Do you have some idea how to solve this problem?Sorry for grammar mistakes.

More replies
Answer Match 62.16%

My touch screen key board is working but my regular keyboard is noy workingI can't type from the key board

More replies
Answer Match 61.32%

hello i heave a nettop mini pc and i have a 7" super sk-8802-a touch screen monitor. when i purhcased it from ebay the seller told me the drivers support windows 7 . i got it and it supports everything below xp and as well as xp. i rather see if i can get it to work rather than sending it back i heard that windows 7 has a xp mode so i can use the programs on windows 7. i found a driver for it from a website called touchkit.com but its a rar file. my thought is can i install the drivers regularly and then swap out the rar files. and help would be great.

A:my touch screen dont work .... bad drivers

If you can't get it to work I would send it back and get your money back. I wouldn't even play around with the guy he misled you and I wouldn't post a good deed done on his reputation. I have seen to many people get taken on Ebay and it ticks me off because I for one have had it done to me. I now by everything brand new from Newegg and or some place I know to be reputable.

Unrar the files to a folder on your desktop and open up device manager and right click on you new touch screen monitor and click update drivers. Then select "Browse My Computer for Driver Software" and then select "Search For Drivers In This Location" and Make sure the subfolders check box is checked and then browse to you folder and click ok then click next. It will either say it is updating the drivers ot that windows has determined that the best driver is already installed. If it says the later then try an Automatic update from windows update. Before you do though go into system in control panel and click the hardware tab and select the setings for "Device Installation Settings" and set it to these setting like below in the screenshot the go back into device manager and automatically update the drivers and it will search windows update as well to see if there are drivers available for your device.

9 more replies
Answer Match 61.32%

had this computer for little over 2 months and snce having it the touch screen will not work at all hp 15.1 notebook, touch the screen nothing happens look in device manager cant even find the touch screen in there, any help would be appreciated, thanks

A:touch screen on windows 10 wont work

I request you to boot the PC to BIOS and test the touchscreen in BIOS. To boot the PC to BIOS, first turn off the PC completely. Keep tapping ESC on startup. You would get a startup menuPress F10 to get into BIOS. do not keep the PC in mute. Touch the screen in BIOS, the PC should beep.  If the PC beeps in BIOS (system utility), the touch screen is fine and you are facing a driver or a software issue. If the PC does not beep in BIOS, when you touch the screen, there is a issue with the display/touchscreen. Considered as a hardware issue (service or display replacment might be required). Please share the product number of your PC. This will help get the specification of your PC and I can give further suggestions.  ****Click the White thumb to say thanks********Please mark Accept As Solution if it solves your problem****

1 more replies
Answer Match 61.32%

Hi,My touch screen is disabled upon upgrading to Windows 10, I tried to uninstall HID Compliant touch screen from Device Manager then reboot, but still no luck. Anyone have found a fix? Thanks.

More replies
Answer Match 61.32%

Hey guys i'm pretty new to all this and have only just signed up to the forum so hope i have put this in the right place!!

Anyways i was wondering if an IR Touch panel that fits over the top of an ordinary LCD will work with windows 7 as i have seen one on eBay 32" in size (USB) Pic attached!

A:IR Touch Screen on eBay (Will it work with7)

Looking at the way he's treating it, I would be surprised if it worked at all.

5 more replies
Answer Match 61.32%

please help me had win 7 upgraded to win 10 now my touch screen wont work please help!

More replies
Answer Match 61.32%

My phone has a screen lock on it. So the phone boots up and reaches the screen lock part where I can go about unlocking it and doing whatever I will with my phone. however the screen wont respond to any touch. It is an Android and the phone is a Samsung intercept.

also... :/ 3 days ago I dropped in it a puddle. I've been drying it out for few days under weak heat from a heat lamp but I tried it yesterday and I had the problem mentioned above ^. any suggestions, or am I screwed?

Thanks,
Sprinter
 

A:Smartphone touch screen won't work after booting up

I'm afraid you will have to get a new phone. Who is your wireless provider?
 

4 more replies
Answer Match 61.32%

please help me had win 7 upgraded to win 10 now my touch screen wont work please help!

More replies
Answer Match 60.48%

I get a black screen (with backlight).No hard disk access,input output system does not work (It does not turn on/off CapsLk or NumLock).The CPU is not working! Only a long holding the power button turns off the computer.1) my OS installed from the Microsoft Download Center (?winver? into: release 1511,build number 10586,494)2) all drivers are updated from the support center Y700 Touch-15ISK Laptop (ideapad)   (including (ACPI) Driver.)3) I do not install any utility from Lenovo.4) I get a black screen when my laptop is connected to AC power and when running on battery power.5) Power plan is set up by default (Not Configured) 6) I never get problems in High performance mode with connection to AC power (Minimum processor state : Plugged in 100%). I attach my system log




Y700-15ISK Touch/BIOS: CDCN35WWi7-6700HQ/GTX 960M/(RAM) 16,0 /LITEON CV1-8B512

A:Y700 Touch-15ISK .Black screen.The CPU is not work...

You can press the novo buttonGet into the bios and set legacy boot up .And insect the Windows installion cd to fix

2 more replies
Answer Match 60.48%

Hello,

My wife's parents purchased a Toshiba Qosmio DX730 (PQQ11A model). They recently upgraded to Windows 8 and the touch screen now does not work.

The problem is missing drivers (the monitor driver is reporting as a Generic PnP Monitor).

I went to the Toshiba site and selected the driver downloads for the appropriate model and installed a number of drivers, including the recommended NVidia display drivers. There are no drivers on that site that seem to install support for the Toshiba touch screen monitor.

Are there no Windows 8 drivers available for this model? If not, is there another solution? If so, where can I find them. Any help very much appreciated as they have a nice computer and purchased Windows 8 so they could use it with the touch features.

Thanks.

A:Qosmio DX730 and Win8 - touch screen does not work

Hi

On the Toshiba EU driver page you can find the Win 8 drivers.
As far as I know you need to install the Toshiba display driver to get the touch function working properly.

I found this driver.
Please check if you can install this:
[Win 8 TouchScreen Software for Qosmio DX730|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=366&selProduct=7338&sel ShortMod=null&language=13&selOS=40&selType=all&yea rupload=&monthupload=&dayupload=&useDate=null&mode =allMachines&search=&action=search&macId=&country= all&selectedLanguage=13&type=all&page=1&ID=83418&O SID=-1&driverLanguage=42]

2 more replies
Answer Match 60.48%

Since windows 10 upgrade, my touch screen on my pc no longer works. How can I fix this problem? I had also upgraded my son's laptop and now his mouse doesn't work on his, it works is a mouse is plugged in but not without on either computer. I am confused!

A:Touch screen no longer work after upgrading to Windows 10

Head over to the system builder websites to download and install windows 10-compatible drivers for your machines.i_Xp/Vista/W7/W10 User

3 more replies
Answer Match 60.48%

chrome://flags only help until my yoga 700-11isk ideapad reboots the next time and the touch screen does not respond to scroll. 2 fingers.  anyone has a more permanent solution?

More replies
Answer Match 60.48%

Hi HP Support Greetings from Latin America, we have a HP Pavillion All in one 27-n001la, mainly used by my 5 years old daughter, with all her educative games. Since the upgrade to Windows 10, touch screen is not longer "touch", and we cannot find driver available at the website to solve this issue, which btw, is quite relevant for my daughter as she still doesnt have any control of the mouse. Hope you can help us. Warm Regards from Chile Carolina

More replies
Answer Match 59.22%

i have a CGV ray liner ts Universal LCD Touch Screen Remote Control and it wont work on anything i've tried all the codes and the search through the library and nothing is working it can control six things and i only want it for my tv, set top box, and dvd player.
i hope someone knows more than is the user manual (which i read hundred times)
 

More replies
Answer Match 57.12%

Pasting in contextual information from another post. ~ OBconflicker.Bi!nf worm keeps reappearing, windows defender monitor stops working, slow computer, windows search protocol windows pop up, Malware, virusPop up windows keep appearing "Windows search protocol host stopped working and was closed" Itunes occassionally doesn't work, Media Sync doesn't work. Hard Drive keeps working in the background. Windows Defender no longer monitors the running programs.End of added information. ~ OBLogfile of Trend Micro HijackThis v2.0.2Scan saved at 8:46:00 AM, on 1/11/2010Platform: Windows Vista SP1 (WinNT 6.00.1905)MSIE: Internet Explorer v7.00 (7.00.6001.18349)Boot mode: NormalRunning processes:C:\Windows\system32\taskeng.exeC:\Windows\system32\Dwm.exeC:\Windows\Explorer.EXEC:\Program Files\Windows Defender\MSASCui.exeC:\Program Files\Digital Media Reader\readericon45G.exeC:\Program Files\Java\jre6\bin\jusched.exeC:\Program Files\Intel\IntelDH\CCU\CCU_TrayIcon.exeC:\Program Files\Common Files\Intel\IntelDH\NMS\Support\IntelHCTAgent.exeC:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exeC:\Windows\WindowsMobile\wmdc.exeC:\Windows\System32\hkcmd.exeC:\Windows\System32\igfxpers.exeC:\Windows\sttray.exeC:\Program Files\... Read more

A:microsoft windows search protocol host stopped, slow, firefox doesn't work, itunes doesn't work

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Answer Match 56.28%

Can we replace the capacitive touch controller or is it fixed?

A:Can one capacitive touch screen be replaced by a resistive touch screen?

Can you please provide more details?
What device do you mean?

2 more replies
Answer Match 56.28%

Starting about a week ago I was unable to go into full screen mode when using youtube and possibly other programs but I'm not sure. Can anyone give me help on how to fix this problem? When I click the full screen button it just goes to a blank screen that has a dark gray color. thanks in advance

-k

More replies
Answer Match 56.28%

After I installed service pack 1, the splash screen on my sound card "sound blaster Audigy" doesn't work. I tried to uninstall and reinstall the program. I also cleaned the regestry from a reg. cleaner, but nothing. I also called tech support from the sound card and they could not help me.

Any ideas on how I can get this to work. Thanks.

P4 2.0
XP Pro
512 ram
sound blaster sound card
 

A:Splash screen doesn't work after SP-1

6 more replies
Answer Match 56.28%

My screen doesn't work. I updated my Windows 10 (not sure if I have the 32 or 64 bit system), waited until it was done, and then closed my laptop. Now, when I boot it up, I can hear it boot up, and the light for my caps lock flashes. I've tried removing the battery, waiting about 30 seconds, then putting it back. I've also tried removing it completely and just using the plug in charger (not sure what it's called, it's the wall charger to the battery). I've tried turning it off and on multiple times. I don't have an external monitor, and I don't have a monitor scrolling key on my keyboard. Is there anything else I can try before having to take it in to a professional?

More replies
Answer Match 56.28%

Granddaughter dropped her laptop (that I purchased). The screen is now just black. I want to replace the screen, however, I've been told that I might need to purchase the digitizer also. How would I be able to know if I need that and what are the part names or numbers for this total repair? 

A:HP m6-1105dx screen doesn't work

Hey @Hbbytes,Welcome to the HP Support Forums! This is a great place to find solutions and help from our community! I wouldn't be able to tell you the exact parts you'd need, or the price of the repair. It would all depend on what the issue actually is. You'd have to call in to find that out. Please use the following http://www.hp.com/contacthp and create a case for your issue and contact HP. If you live outside the US/Canada, please click the link below to get the contact information for your region.http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html Please keep me posted.  You can always say thanks by hitting the Thumbs Up button below!Cheers,TechSurge.

1 more replies
Answer Match 56.28%

Hi, can anyone advise me? Since I downloaded Windows 7 Professional my screen saver doesn't work! I have put in 'Photos' and it works when I preview in Control Panel, so I 'apply' and 'ok' but then nothing happens! What can I do?

A:My screen saver doesn't work!

Hello VeronicaMary, Welcome to SevenForums.

How about the time how the screensaver takes effect?
maybe you set it too high or maybe a display driver problem...

another reasons why screensavers wont execute are;

running activity in your pc or sudden movement of your pointing device...

hope our gurus will help you further.

9 more replies
Answer Match 56.28%

I have un/reinstalled my xp windows...my problem is my screen saver doesn't work now.I had same problem when I installed the windows first time in my pc. I got the solution in that time by calling the technical support. They asked my to disable a file , then the screen saver did work..Now I forgot that file name and I have same problem again but no techincal supprt anymore.
Anybody can help me to get the screen save works again,please?
THANKS
 

A:My screen saver doesn't work

Hello ayad kachou. The simplest thing to do is call the tech support guys again and make a note of the offending file.
 

3 more replies
Answer Match 56.28%

I followed the instructions in help but clipboard did not copy the screen. With or without pushing the alt key. It still had my last copy of a link address. While we are at it where do I go to get rid of the big bar across the bottom of my new 24 in whooperdooper back lit led display that makes it to about a 17 inch display. None of the tool bars are activated. Have a nice day.

A:Screen Capture doesn't seem to work

Hello Dgudgel,

See if this may be able to help.

Screenshot with Paint

and

Screenshot and Upload using MWSnap

Hope this helps,
Shawn

9 more replies
Answer Match 55.86%

Help my windows 7 laptop just keeps rebooting and i cant get to safe mode or recovery what should i do ?

A:system recovery doesn't work and safe mode doesn't work and just keeps reboting

System manufacturer and model?
 
Louis

0 more replies
Answer Match 55.86%

hi, I know there are many in the forum who have the same problem as mine. 
 
my computer was running fine last friday. I tried to start it on saturday, it says it can't startup and need to repair startup. I did run the repair but still can't startup. I tried to use system restore to earlier dates, it still can't startup. The computer has trojan virus before and I tried the anti-malware from internet to kill them. seems that it create more problem for my PC. I have some important files in the computer that I wish I have archived. 
 
wonder if any one can help. thx in advance.

A:can't start up computer-window7, repair doesn't work, restore doesn't work

I'll report this topic to appropriate helpers.
Hold on there...

6 more replies
Answer Match 55.44%

Merry Christmas Team.

My little brother came home from work one night and now is screen doesn't work at all. no flickering, backlight etc. I connected it top the TV via HDMI and even that didn't show up anything.

How high are the chances that his graphics card has died?

Cheers
Gameover.

A:Laptop Screen doesn't work, No Backlight

There aren't really graphics cards in laptops, they are built in to the motherboard. So, if it isn't displaying anything even when on the bios or start screen, it may be the motherboard that is bad.

3 more replies
Answer Match 55.44%

Hello. I use the Windows Live Photo Gallery as my screen saver on Windows 7. When screen saver starts, it gets stuck on this one image and doesn't switch to other images. On the Screen Saver menu, if I click "Preview" then it works normally. It's only when the Screen Saver begins by itself then it won't change images. Other screen savers work fine. Thank you Boaz
 

More replies
Answer Match 55.44%

my computer runs windows vista home basic when im online (not sure if this is a vista or networking problem) n i try to switch the screen from small to big the screen freezes. now i had this problem when i was streeming from youtube but i just went to settings n disabled the high resolution thingy. that seemed to work for youtube but on these other sites it still freezes up even when the high resolution thing doesn't work.

i thought it could be that my version of whatever player the site uses could be old news but im not sure if that is really the problem considering it has happened on more than one site...if anyones got some ideas i would be glad to hear em...until then im stuck watching this stuff in small screen...
 

A:Solved: Small to big screen doesn't work on net

6 more replies
Answer Match 55.44%

I use the On-Screen Keyboard. The reason is my brother threw a wooden portrait frame at my laptop, breaking my 1, 3, Q, T, U, and J keys. Those keys are part of my password, and I use them to type documents, and now a fan fiction, nearly every day. Usually I have no problem bringing the OSK up, but now, for the first time I do. I am at the login screen, clicking on Ease of Access, and the On-Screen Keyboard does not turn on. I tried checking all the boxes, and only High Contrast, Filter Keys and Sticky Keys turn on. My system is a Windows 7 Home Premium, 64-bit. I suspect two possible causes: one is I shut down my computer instead of restarting it just before installing updates (I was gone to a party), and two is some random guy who harassed me on a chat website could have hacked my computer. Please help. 

A:On-Screen Keyboard Doesn't Work, Can't Login

do you have a usb keyboard to another computer in your house? if so id try using that

13 more replies
Answer Match 55.44%

Hi, so I have an Acer Aspire 3002LMi and for as long as I've had it it has been susceptible to overheating easily and crashing. Normally this is resolved by manually cutting the power and everything is fine and dandy.

Now my sister was on the laptop and shut it down normally, and the next time I came to turn it on the green light on the power button came on, and I could hear some fans whirring inside and the CD drive was spinning, basically everything one would expect for a normal boot up, except there was nothing on the screen. No faint images, and the same happened when I attached a monitor and attempted to switch between screens.

I have tried many solution so far, such as opening up the laptop to see if the screen has come loose, and checking RAM, processor etc however everything seems to be fine and all connected.

Was hoping for any possible ideas as to how to resolve my problem, or whether it is more likely to be a component failure due to the overheating mentioned?

Sorry for the long windedness I am just trying to be as specific as possible to save answering all the basic questions over and over.

Thanks for any help
Matt
 

A:Laptop will not turn on/screen doesn't work

If you see normal views on the external screen, you likely have burned out your LCD Screen inverter. You should be able to find replacements online, but you need experience installing inverters. There are about 18 screws to remove since you must disassemble the top half of the case, and remove the screen to access the inverter socket which is at the bottom of the screen. Usually you can get an inverter for $15, but there are almost no two alike so be sure you have the correct one.
 

3 more replies
Answer Match 55.44%

So I've bought a pen for M200 and reinstalled the operation system.
Now I have M200 with Windows XP Tablet PC edition, a Screen Rotation utility and Pen Button utility. Now Pen Buttons work fine with my new pen, but the screen itself doesn't. I mean, the pen doesn't work with the screen.

I have a Mice and other pointing devices menu in Device Manager and it consists of the following sub-menus:

HID-compliant mouse (Random DELL mouse I'm using)
PS/2 Cimpatible Mouse (?)
--------

I believe there must be something else..
Please tell me, forum, what drivers should I download to make the pen work?

A:Portege M200 - Pen doesn't work with the screen

Wait a moment. Do you use original Toshiba recovery image (operating system) or you have installed your own version?

4 more replies
Answer Match 55.44%

I am trying out the split screen function - I move my web browser to the RIGHT side and it splits it half the screen - but when I move another web brower or notepad or anything to the LEFT hand side, it doesn't do anything. It just stays where it is. Any ideas?

A:Split screen - it doesn't seem to work on the left?

Hit windows key and then use arrows.

5 more replies
Answer Match 55.44%

I have tried everything , I tried bubbles screensaver set time to come on 1 min bubbles starts but after a few minutes the screensaver goes blank or black screen even if I use the windows media center screensaver n turn off the other screensaver off still please help since I want to use my pictures for screensaver. Your help is appreciated

A:Window 7 screen saver doesn't work

  
Quote: Originally Posted by Fordtruck


I have tried everything , I tried bubbles screensaver set time to come on 1 min bubbles starts but after a few minutes the screensaver goes blank or black screen even if I use the windows media center screensaver n turn off the other screensaver off still please help since I want to use my pictures for screensaver. Your help is appreciated


I have my screensaver set for ten minutes and have my monitor set to go blank at 20. That is what yours is doing. If you want to change the time before it goes blank check in your Control Panel under Power Options. You should not leave your screen on all the time, there is no reason. Let it go blank after about 20 minutes.

7 more replies
Answer Match 55.44%

Hello,

I have a Toshiba Tecra M5 laptop without a functioning screen. The original screen died over the course of a couple of days. I believe it was the backlight. The screen would go very dark, but I could still see images on the screen very faintly. I would press the toggle switch that syncs with an external monitor a couple of times, and eventually the screen would come on again. This went on for a couple of days until finally I could see the screen trying to come on, partially lighting one corner, but unable to turn on.

I connected my laptop to an external monitor and was able to get by with that while I waited for my replacement to come. I ordered a "screen caddy" from eBay, the same model as my laptop sold as-is for parts. Among the working parts on it were the screen and the fingerpad mouse, which I also needed. The "screen caddy" is unable to boot, but it starts the process enough so that you can see the screen does work properly.

The trouble is that when I put the screen into my own computer, I don't get any image at all. The symptoms are different from my original problem. I'm not able to see images on the screen, even faintly. I can see that the backlight does come on. I've checked the connections and cannot find a problem.

I'm out of ideas for what to try. Any suggestions would be most appreciated.

Thank you.
 

A:Laptop Screen Replaced, Still Doesn't Work

The backlight is usually all or nothing. Did you change the Inverter as well as the screen ?

Please explain what a 'screen caddy' is and exactly which parts you have exchanged.
 

2 more replies
Answer Match 55.44%

I use Nvidia Geforce 9800GT.
I installed the latest driver.
I recently installed Windows 7 (again) and now when I start Counter Strike I get this half screen and resolution problems...
I want to use the lowest res' (640X480) and I can't! But when I use the highest res' the game supports (1280X1024) everything is fine! But I need the lowest resolution and it worked before I reinstalled the Windows 7.

My original not-in-game resolution is 1440X900 (he recommended one by both Win and Nvidia).
What should I do?

A:Game screen resolution doesn't work!

bump

2 more replies
Answer Match 55.44%

Hi i would like some help!!!!!

my laptop screen stops working when login to windows (when in normal boot mode). So when i boot in safe mode it does work!

also i don't know when it stop working in vista since i normally always work with my tv, you see and rarely switch back to my laptop screen.

so what i have tried so far:
reinstalled the VGA drivers
fn+f3
checked with search & destroy, ad-aware and comodo virus scanner.
updated everything
let windows repair it-self
did a system restore to a earlier date but the only one i had was from 4 days before i noticed the problem(so not very useful )
cleaned out my start up programs
also did a Cclean of my browsers and reg
also uninstalled some programs i didn't use or didn't know why they were on it anyway .

specs:
intel core 2 duo t7500
intel 965m chip
4gb ram
vista 64x ultimate
if you want more specs ask...

so can some help me out please, i have ran out off idea's what to do about it....

A:Laptop screen doesn't work in vista 64x

Model Number Please?

4 more replies
Answer Match 55.44%

Please help, whenever I turn my computer on, the screen goes black just before the login screen. The computer still works, as it still makes all the noises it would normally make, eg. the login noise if I type my password. If I hit F8 when the computer first starts, it comes up with lots of options, one of those is 'last known good configuration'. That use to work and fix it, but now it no longer does. The computer also works perfectly fine on safe mode. My OS is Vista business, I have an Intel Core 2 Duo processor 2GHz, 2GB RAM, 32-bit OS. If I go into control panel in safe mode and go to problem reports and solutions, it says there is a problem with my graphics driver, but I can't find a way to update it. That's my summary, if you think you can solve it, below is more detailed.
I use my laptop at school. One day I closed it (which locks my computer), but when I opened it, the screen wouldn't work, but it still made all the regular sounds, such as the music I was playing. When I turned it on and off, it worked up until just before the login screen. This would keep happening unless I ran it in safe mode. Eventually I took it to the school IT department and they fixed it.
Quite a bit later the same thing happened. This time, while in safe mode, when the help menu came up, I searched around a bit until I found that hitting f8, when the computer starts, gives you a boot up menu. I tried this and one of the options was last known good configuration (LKGC), I chose this and the co... Read more

A:My screen doesn't work except in safe mode.

To me, this sounds like an issue with graphics card drivers.
When you go into Safe Mode, hit to go into Safe Mode with Networking. Without it you cannot go on to the internet (Which is also why you can't download drivers when you hook up a USB Drive...I think it usually goes to Windows Update, but cannot connect because you are in Safe Mode without Networking).
Go to the site for your graphics card's drivers and try installing the drivers fresh.

I'm not the best at this, but I read your post and that's what I think is wrong. I could be wrong. If it's not the problem, then I don't know and sorry.

4 more replies
Answer Match 55.44%

Hello,

I can not print screen. (in other words get a screen shot)

I use vista and have a gateway laptop. I am trying to print screen on IE or FF. There is a key called "Ins" and under it with blue letters it says PrtSc. For that I press Fn and Ins together but print screen doesnt work. I tried also with shift, alt ctrl keys too.

Please help.

A:[SOLVED] Print screen doesn't work

hi not really my thing but you can use the snipping tool in all programs, accessories to do something similar

4 more replies
Answer Match 55.02%

I'm pretty sure I had a trojan or something cause my computer kept getting worse. I tried several scanning programs but none of them cleared it up completely.

Anyway, now I can't even get past the windows loading screen, and if I try to log in through safemode, I get stuck at the screen that says "SyS.multidisk....." or something.

Is there any way that I can log in dos mode or something and completely wipe my system clean and reinstall windows xp? I don't have the disk, it came with windows XP already on it. I don't care if I lose all my files, I just want a working computer again, free of any trojans or anything.

So, can I somehow log in dos mode or something (I don't even know how to do that), wipe everything clean, including whatever virus screwed up my comp, and reinstall windows XP without the disk? I'm assuming I have a copy of windows XP saved on my hard drive or something, cause my computer came with windows XP already installed and they didn't give me a disk.

Thanks so much for the help, I hope I can get my computer working again.

A:Stuck at loading screen, safemode doesn't work

Hello kultivater, Welcome to TSF!

If the data is not important to you, have you the following items handy?...

1: The original Motherboard Drivers CD
2: A Windows? XP SP2-CD (or access to borrow one)
3: The Windows? Product Key that came with the computer.

Once you have these, we can give you a step-by-step guide to wiping your HDD and reinstalling the Operating System (Windows? XP) on your computer...if that's what you really want to do

Regards,

16 more replies
Answer Match 55.02%

I'm pretty sure I had a trojan or something cause my computer kept getting worse. I tried several scanning programs but none of them cleared it up completely.

Anyway, now I can't even get past the windows loading screen, and if I try to log in through safemode, I get stuck at the screen that says "SyS.multidisk....." or something.

Is there any way that I can log in dos mode or something and completely wipe my system clean and reinstall windows xp? I don't have the disk, it came with windows XP already on it. I don't care if I lose all my files, I just want a working computer again, free of any trojans or anything.

So, can I somehow log in dos mode or something (I don't even know how to do that), wipe everything clean, including whatever virus screwed up my comp, and reinstall windows XP without the disk? I'm assuming I have a copy of windows XP saved on my hard drive or something, cause my computer came with windows XP already installed and they didn't give me a disk.

Thanks so much for the help, I hope I can get my computer working again.
 

A:Stuck at loading screen, safemode doesn't work

Hi kultivater,

When you first turn on your computer, you may see a prompt stating press F10 (or another function key) to go to System Recovery (label may be different)

Please try restarting and then check for that key press. If you get into CMOS (bios) setup screen, that's not it (which is usually DEL or F1 or F2 key)
 

12 more replies
Answer Match 55.02%

Hello!
I installed Facebook App, and it works perfectly, but when I wanna watch a video in full screen, it doesn't go to full screen mode. is there any solution for this, please?

More replies
Answer Match 55.02%

Recently there has been an issue with my Z930 and I'm not sure if it's a damaged screen or if it's something to do with the software. I'm also using Windows 8 as the operating system.

Earlier today the device was running as normal, but it later began flickering with a mess of pixels everywhere like a glitch, with black lines rising from the bottom of the screen.

A few seconds after that cleared up, the entire screen turned black.
It is still lit up, but there's only a blank, black screen - I can't even see the cursor.

Every now and then the screen flickers like it's struggling to keep working. I hooked it up to another screen and its typical display showed on the other device, so I'm taking a guess that it's a damaged screen.

Before I start preparing to get a new screen or even a new device, is it possible that it might be something else other than a broken screen?

Because it's odd seeing that I take great care about the screen because it is fragile to begin with, I haven't knocked it or had any fluids on the screen, so having it suddenly break like that is pretty odd.

A:Satellite Z930 doesn't work - black screen

Hi

The described symptoms like flickering with a mess of pixels sounds like a graphic card problem.
Also the fact that the same symptoms are visible on the 2nd external screen, would confirm my assumption that the GPU would be affected.

In case the internal screen would be faulty, the external screen should work properly but this isn?t the case.

From my point of few the motherboard together with the GPU has to be replaced in order to fox the issue but of course the whole notebook should be tested by an service engineer before starting to replace any parts.

3 more replies
Answer Match 55.02%

what can i do abou that?
tried to reinstall the games.
already scanned with adawre
thanks
 

A:keyboard doesn't work good on full screen

9 more replies
Answer Match 55.02%

Hello,

I find when I press the Windows key, or open the Start Screen and start typing, nothing happens. Usually the sidebar opens with search results, but recently it has stopped working completely. Also, the search charm on the sidebar, and the search button on the Windows 8.1 (update) Start Screen do not work either--when I press them, nothing happens.

I spent a couple of hours looking for a solution to this problem, but with no luck. At first I thought it was a Windows Search service that had stopped working, so I restarted them, but the problem persisted.

I appreciate any help!

A:Typing in the Start Screen doesn't work/Can't search

Go to Indexing Options in the control panel, advanced button and trouble shoot. You can also rebuild the index

8 more replies
Answer Match 55.02%

My device is Widi compatible. So when I try to connect to my Smart TV, all other projection modes work except "2nd Screen Only" where both the screen goes blank.  I've installed all the latest updates of all the drivers, Wifi Intel PRO Sat, Graphics Drivers, latest BIOS, everything. Nothing works. Oh and another exact same laptop in my house, only diff. of screen size, works fine on this mode.  Any soltion would be helpful. 

More replies
Answer Match 55.02%

Hi guys,A few days ago I started my computer and it blue-screened with the message:A problem has been detected and windows has been shut down to prevent damage to your computer.If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try chaging video adapters.Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.Technical Information:*** STOP: 0x0000007E (0xC0000005, 0xF85F9AD9, 0xF898B7A4, 0xF898B4A4)I had installed XP over the existing 2000 Professional last February, and it has worked well until this popped up.I hadn't installed any new drivers, programs, or hardware recently.I tried running chkdsk /r from the repair console. The program found one error. I ran chkdsk /r again, with no errors found. I then used the XP disk to repair the system, and the computer seems to boot normally until it started to display desktop shortcuts. At this point the computer blue screened with the message:STOP: c000021a {Fatal System Error}The widows subsystem system process terminated unexpectedly with a status of 0xc0000005 (0x340f... Read more

A:Spontaneous Blue Screen, Repair doesn't work

Hello,Did you try the things suggested in your first blue screen? You don't indicate that you did.Have you run a scan on your hard drive to test that it is ok? If not:Go to the manufacturer's website and download their disk utility to check the hard drive out: Fujitsu "FJDT" DOWNLOAD Works with fujitsu models only.
Hitachi / IBM - DFT "Drive Fitness Test" DOWNLOAD Works with all manufacturers.
Samsung "hutil" DOWNLOAD Compatability unknown.
Seagate "Seatools" DOWNLOAD Works with Seagate drives only.
Toshiba - N/A There are no tools available for Toshiba, but you may be able to use IBM or Maxtor's.
Western Digital "Data Lifeguard" DOWNLOAD Works with WD drives only.

1 more replies
Answer Match 54.6%

My Ideapad S415 touch screen has suddenly stopped working.  I've had a tech connect to my PC and try a BIOS reload of default settings, plus unistalling all "HID" devices in Device Manager with no resolution.  I've also tried a system restore with no luck. The system properties does see the touch capability. Suggestions? Thanks.










Solved!
Go to Solution.

A:Ideapad S415 Touch - touch screen stopped working

hi Hersh,
 
Welcome to Lenovo Community Forums!
 
First do a Power Drain 
     (If the battery is removable)
            Remove AC and Battery and hold the power button down for 15 sec.
               Turn the computer back on and see if the Touch capability is now detected under System Properties,
                  If not
         I suggest you contact Lenovo Technical Team about the Issue as this may be a device detection issue.
       Lenovo Technical Team
 
Regards
Solid Cruver



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 54.18%

Hey,
When I attempt to boot Windows XP Professional with SP 2 on my computer I get a blue screen with this error:
Stop: 0x0000008E (0xC000000E, 0x8056E2A2, 0xEEC5B96C, 0x00000000)
immediately after it loads to windows.
Safe mode comes up with a black screen that seems to list a bunch of files and freezes.
Any ideas?
Kara
 

A:Blue Screen on Startup, Safe mode doesn't work either

read this error resolution from microsoft or
this one or
this one

do a virus kill with these
ewido
spybot search and destroy
hijack this
microsoft anti-spyware
they are all free
you can google them and find the download sites.
 

1 more replies
Answer Match 54.18%

Hi, this isn't an urgent problem, in fact it has been a problem since I installed Windows 7 over a year ago, but I have recently decided that it is extremely naïve of me to ignore the problem, because no matter how lucky I am I will need to access safe mode eventually, and that's not possible right now. Basically my computer works 100% fine (barring speed issues or any other minor complaint), including my keyboard, except when I have to hard boot my computer/power shuts off/whatever causes the computer to boot up into the "windows error recovery" screen. When I get to that screen I get four options: boot windows 7 normally (highlighted); boot windows 7 in safe mode; boot windows 7 in safe mode with networking; and one other one I believe. There's a countdown from 30 seconds and at the end of the countdown the highlighted option will be selected if I don't choose one myself with the arrow keys and enter/return. Problem is, I can't select a different option from the highlighted one. the arrow keys and enter key (or any other key) are all functionless. The keyboard is plugged in and the computer knows that because its media lights (the mute/play-pause/stop/&c. keys) are all lit up. In the past I have had to use Safe Mode for many old computers, as I'm sure most people have, and currently I don't have that option. Any help would be appreciated. Thank you in advance.
 

More replies
Answer Match 54.18%

Ugh hey me again. Please help this is driving me crazy.

About four days ago I had all my games and applications on my External Mybook connected by USB2 at a speed of 5400RPM. After finding out they could go faster on my internal I switched them over to there but during the process of moving about 3 games simutainously Vista froze and when I booted it back up explorer would freeze everytime it loaded. After this, I reinstalled Vista to grab some of my other stuff to back it up on my external in case the internal had to be formatted. Vista seemed to be working okay at this point with the Explorer working fine. In the morning I turned on the computer to find that Vista wouldn't boot up. It just went blank before showing the loading screen. I reinstalled Vista two times and the same thing happened, it worked fine and then I shut it down and then next time I booted it up it wouldn't get to to the logon screen. I then tried the same thing with XP and Win7 Build 7600 and it STILL happened. I actually thought my hard drive was corrupted and it was a old ****ty WD SE 3600 which I was intending to replace anyway so I bought a new Seagate 7200.12 and installed Vista. It installed notacibly faster by like twenty minutes as opposed to the old hard drive so I thought the problem was fixed but yeah I shut it down and bang. Not loading.

Anyone have any idea what's wrong?
 

More replies
Answer Match 54.18%

Keyboard Doesn't Work For Windows Error Recovery Screen. Thread problem similar to jaredthescot. Any ideas?
 

A:Keyboard Doesn't Work For Windows Error Recovery Screen

6 more replies
Answer Match 54.18%

I have a Toshiba Qosmio G50-12Q

If you use a wireless mouse does not work the screen saver.
If I disable the mouse instead of the screen saver runs regularly.

There is some way to run the screen saver also using a wireless mouse?

Tank you

A:Qosmio G50-12Q - Screen saver doesn’t work if I use wireless mouse

That?s really strange. I use Logitech NX80 wireless mouse and it works perfectly with screensaver on my Satellite P500 preinstalled with Win7 64bit home premium.

Do you use original preinstalled OS?
Do you use screensaver downloaded additionally or it doesn?t work even if you use standard Win screensavers?

3 more replies
Answer Match 54.18%

When I open up my computer and try to login, both the keyboard and touchpad no longer works.  The only thing I can do is touch the screen and hope the on-screen keyboard pops up.  but I can't use the actual physical keyboard or touchpad.  They seem disabled. I don't even see the mouse pointer arrow or icon on the login screen at all  when I try to move my hand around the touchpad now it takes me a couple tries to login abd only after I  login, the keyboard & touchpad work again Im using HP Spectre x360. I think this started happening after the last major auto update  (Also now the computer doesn't go to sleep when I close the lid,  and after a while the computer gave an alert message that the battery was low since it never went to sleep.  After this last update, the low battery alert message is now pink instead of blue )

More replies
Answer Match 54.18%

I was initially very excited to hear that windows 8.1 allowed users to split the screen in any ratio they want (not just 80:20) in metro mode. However, no third-party apps seem to be compatible with this feature. Only Microsoft apps will expand to any ratios other than 80% or 20%. All third party apps will remain in the narrow 20% view even when you try to expand them to, say, take up 50% of the screen. This is a huge disappointment, and I haven't found this problem addressed anywhere.

Any thoughts?

A:Split screen doesn't work in Windows 8.1 metro mode.

This is probably because it is up to the app developer to incorporate in their design. Because 8.1 is still in beta, the versions of the apps that include the code for the 50:50 version aren't in the store yet.

6 more replies
Answer Match 54.18%

Hey everybody, I just received my P40 last week as a replacement for another Lenovo device. So far, everything seems to work fine with one exception: When I turn the screen over to the "tablet position", the touch screen and the touch pen show erroneous behaviour.a) As soon as I make the first input with the touch pen, I cannot make any further input with my finger, so the touch input is simply turned off. The Windows setting to ignore touch input when the stylus is used is not active.b) When I try to tap buttons at certain areas of the screen, especially at the upper edge, the cursor of the stylus starts jumping around and shows up at the lower edge of the screen. That means that when I for example tap on the "X" symbol in the upper right corner to close a window, I actually click on some of the symbols in the system tray in the lower right corner. This problem stops occuring as soon as the angle between the two case parts (screen and keyboard) reaches/exceeds approx. 40°. It does not matter if Windows is in "Tablet" or "Desktop" Mode. I already tried to manually install another Wacom driver mentioned at https://forums.lenovo.com/t5/ThinkPad-S-Series-ThinkPad-Yoga/Wacom-Tablet-Service-for-ISD-Driver-Win... and https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P40-Yoga-issues/td-p/3293985. I had no luck trying driver versions 7.3.3.12, 7.3.4.8 and 7.3.4.13. I would really appreciate your help since this issue makes working in the tablet position... Read more

More replies
Answer Match 54.18%

Hello everyone, my touch screen on my lenovo ideapad z400 touch is not working anymore.  The only weird thing I remember is some ghost touchpoint on my screen. I've been looking for the answer to this issue, but it seems that Lenovo does not address this problem.  If someone has found the solution to this problem and wants to share it with me, I will be forever grateful.  

A:IdeaPad z400 Touch - Touch screen not working

I facing the same situation right now. any solution please. left side of monitor is being "touched"?

1 more replies
Answer Match 54.18%

I bought new, but somehow do not want to workVideo is compared, apparently just enough to buy a new cable https://www.youtube.com/watch?v=cj5L-1l4qzI&feature=youtu.beI bought it herehttp://www.ebay.com/itm/Lenovo-Ideapad-S210-New-11-6-LED-LCD-laptop-screen-with-touch-glass-/1912932...
 
This is a new LCD
This is a broken LCD
 
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

A:Lenovo S210 Touch broken LCD and Touch screen

Hi Magnutus, welcome to the forums.
 
Please check if you Lenovo S210 is on warranty under with this tool.
After that you can open a ticket with Lenovo for the screen to be fixed, if it is not under warranty it will have a cost.
 
If you are the guys that like to fix it yourself (and it is not under warranty) I can recommend you to check the support site for your model, read the Hardware Maintenance Manual (on the documents area) and check how the machine is organized on the inside. On the parts lookup page you can find the parts number so you can find a replacements for the component that is giving you issues.
 
I hope this links helps you.
Regards
 
 
 
 

1 more replies
Answer Match 54.18%

I want to buy this mouse to better work with my laptop.
Can somebody give me some feedback on how this glas pane works instead of a scrollwheel? Handling, etc.

A:Logitech Touch Mouse 400 for a Laptop with no touch screen

Sorry I can't answer your question, but this post piqued my interest. I use the Logitech 620 touch mouse on a Windows 7 box at work. I find a little touchy and has to tweaked. But I haven't tried the 620 on Windows 8. Because I'm always looking for the perfect mouse, I think I might just pick up the 400 tonight and let you know.

1 more replies
Answer Match 54.18%

The touchscreen stopped working suddenly on my Envy TouchSmart Sleekbook 4-1115dx. At first i though it was like a normal failure and that will get fixed by turning the pc off or restarting so I did not pay attention to it until now that I had restart my pc multiple times. Currently running win10. I started to believe it was because of an update a few days ago since it was when the problem started but all drivers and everything is up to date. I have checked for the HID-compliant Touch Screen driver and had to  show hidden divices in order to find it. I cannot enable it and when i check in the properties the following message displays: "Currently, this hardware device is not connected to the computer. (Code 45)To fix this problem, reconnect this hardware device to the computer." I have no idea on how to connect or how it got disconnected. I come from a similar thread but did not solve my problem. I have been researching this for hours and have not found and answer. Help please! 

More replies
Answer Match 54.18%

Hello, My Thinkpad Yoga is connected to a large display through ThenkPad docking station.  Its lid is closed.   During my work, from time to time I see random touch clicks on my screen, and random opening of menus.  It is clear that the touch screen is active although the lid is closed.  When I open the lid, and still connected just to the 2nd display (large screen) display the phenomena stops.  Worth noting is that although only the 2nd display shows an image, the laptop touch screen is still sensetive to touch.  This is I guess why the random touches show up on the screen -- it feels the keyboard not fingers. I expect the touch screen to be disabled while the lid is closed or when projecting only to the 2nd screen.  The solution of opening the lid while connected to the docking station is not acceptable.  Lenovo's local support suggestion to disable touch for the Yoga is also not acceptable -- people purchase Yoga to get Touch.   A solution please! Yaron

A:Yoga touch screen generates random touch while lid...

I am experiencing the very same thing.A driver/BIOS update would be very much appreciated, dear Lenovo.

9 more replies
Answer Match 54.18%

Yesterday I was on my laptop and before I shut it down it went into what looked like a different mode. I booted it up this morning and it is still in this mode. It looks like touch screen mode but I do not have a touch screen.  The icons on the task bar are spaced out and there is a back button on the task bar too which is not normally there. When i right click against the task bar, one of the buttons says "Show touch keyboard button".  All of my files are spead out as if to have room for touching if I had a touch screen but I do not. I am finding this very annoying because I cannot get onto my desktop properly and is not in the right mode. Please help! 

More replies
Answer Match 53.76%

I have a Compaq Presario SR1810NX with Windows XP, it's about 4 years old - never had any problems.
The last time I turned it off, I just unplugged it.

Then the next time, when I turned on my computer it showed
" Windows Error Recovery: Windows failed to start. A recent hardware or software change might be the cause. "

I chose, "Previous Start up (the one that worked for you last time)"

When I pressed it, it went back to the COMPAQ screen with logo.

Now, my computer is stuck at the start up screen with only the COMPAQ logo.
The keyboard doesn't work - I can't press anything (I've tried ESC, F8 - nothing happens).

Please help me. What do I do??
 

A:Help! Stuck at screen logo, keyboard doesn't work, won't boot into Windows.

7 more replies
Answer Match 53.76%

My computer encountered an error somewhere. Now when it reboots it goes directly to the boot screen. I tried to fix it from Safe Mode, but oddly, Safe mode doesn't work. It just reboots and goes back to the boot screen again. Every time. Can you help me?:
Thanks
 

A:Comp keeps rebooting to boot screen/safe mode doesn't work

7 more replies