Tech Problem Aggregator

Printed Web pages appear as source code?

Q: Printed Web pages appear as source code?

Hi, when I print anything from the web (Amazon receipt for example) the 'Print preview' and actual hard copt print appear as source code (similar to lots of DOS type commands etc) and very small print size. Only happens in Internet Explorer 7.0 -tried using Firfox and that appears okay- any suggestions -anyone? (thanks in anticipation)

A: Printed Web pages appear as source code?

open IE, click tools > internet options > advanced tab

click the reset button

This will put everything back to default options and all is good!

2 more replies
Answer Match 70.56%

Whe printing multiple copies from Word 2003, (SP-3) Service Pack 3, all pages come out of the printer blank. This happens on my Canon Imageclass MF5550 printer but not on my HP 8100 inkjet. Printing from email, wordpad and notepad work. I reinstalled Word and the Canon printer driver to no avail. I called Canon tech support and they had me print from Wordpad and since it worked they said it's not their problem.

More replies
Answer Match 68.46%

is there any way i can actually edit the source code in mozilla firefox without having to save the .txt file to my computer?

i tried editing it....typing is disabled for me.

Here's an example:

if it's my website...
in IE i can View the source code and then edit what I want. I then save it, and refresh in my browser. Then all the changes I made in the source code appear on my website. Can you do this in Mozilla Firefox.

if you can't do this with firefox, then does anyone know a feedback site for Mozilla firefox?

A:View-->Source Code, Can you edit source code in firefox?

No, "View source" means "View source" not Edit source. Looks like you're gonna have to either save to txt/html or use IE to edit. Sorry.

For support:

1 more replies
Answer Match 65.1%

I have Windows 98SE with a HP 842C Deskjet printer.
Does anyone know of any program that would allow me to see how many pages I have printed since the last ink refill?

A:Counting Printed Pages??


1 more replies
Answer Match 65.1%

Don't print much multi page output, so am NOT sure when this problem began.

Originally, the pages on my HP DJ855C were printed as expected: page-1 first, then page-2, etc; this resulted with page-1 being on the bottom of the stack. Depending on the application being used, there was often a Print-Order option available for Back-to-Front printing so that the last page would be printed first and then page-1 would be printed last and be on the top in the stacker.

NOW, things seem to have reversed:
If I do NOT ask for the Back-to-Front, then I seem to get it anyway (i.e., page-1 last and on the top). but if I want the original order (i.e., page-1 first and on the bottom) then I must use the Back-to-Front option.
It seems as though the default has become Back-to-Front and then selecting the option for Back-to-Front re-reverses the order and the result is Front-to-Back.

Possibly this reversal happened when I went to Win/XP; possibly it happened with the installation of some piece of software.

Q. Has anyone else had this exxperience?

Please tell me where I might change some parameter to make the option of Front-to-Back actually print the page-1 first like it did originally?

Any advice apprecaited.


A:Order of Pages Printed


Go into your printers and faxes options off of your start menu.

Select your printer, right click the mouse and click on printing preferences.
On the features tab at the bottom there is a option for start printing from last page. If there is a check mark in the box next to it, click there with the mouse and uncheck it and then click on apply and ok and you should be all set after that?

1 more replies
Answer Match 65.1%

The problem I am having is that when I go to print tax return forms from the IRS site or New York Tax Dept site, the form prints "short", that is, the last four or five lines of each page do not print.

You cannot save the data in these forms, they will only save as a blank form. Your only option is to print it.

However, although Adobe tells how to cure this problem ( by clicking File-Print and going down the menu which comes up to "printer scaling", then chosing "print to fit page", this only works if there is a
FILE menu on the left hand side of the page.

In these tax sites, the forms do not have a tool bar above allowing you to chose a FILE menu.
You can right click the mouse and chose PRINT, however it will print a cut off page.

SOOOOOOO do I either:
1. Get a standard Tool Bar to appear on top of the form, on these web site pages, or
2. use some other device or method to print these documents to fit the page.

If any of you are about to suggest right clicking on the printer icon PRINTERS, in the control panel, forget printer does not bring up anything about "Print Scaling".

Hopefully, some geek out there will read this and solve my problem. Thank you. 44 Guy

A:printed pages cut off at bottom

Every computerized tax form that I have available at the website of the sponsoring governmental agency...and reflects a printed version option which has resulted in everything being printed properly.

I'm not sure where Adobe figures into tax preparation.

If you are using a 3d-party app to do taxes...then the problem resides with the support for that application, IMO.


4 more replies
Answer Match 64.26%

Hello TSG!
I am looking for a solution (maybe a registry setting) to not allow XP to print, say, more than 30 pages in any one print job. Any ideas?


A:Set Max Number of Pages to Printed at a Time

Any ideas? Found some software online that is far beyond what I need.

1 more replies
Answer Match 64.26%

Other than using View>Text Size, is there anything I can do that may cause the print to be darker? I know that my eyes are beginning to grow weaker but perhaps someone knows a trick for me to use or an answer. The light print seems to occur on most web pages and very bad on my ISP webmail account. My signature will tell you I am using WinXP Pro and SP2. If all pages were as clear and dark as the print I am seeing while typing this thread, I would not be asking for help. As always, TIA

A:Solved: Pages Appear To Be Too Lightly Printed

7 more replies
Answer Match 63.42%

Hi All, Please Help !!!!!

I set the printer to Fast Mode. After few month used, now every day morning I print.
The first few pages printed are not clear (especially black color), then the following pages are printed fine. Why ??????

A:HP BusinessJet 2200 First Few Pages Printed Not Clear

I'm guessing that the ink jet ports are drying up over night and it takes a couple of pages being printed before the ink is flowing correctly. I think using fast (draft) mode send less ink to the heads or less ink is available because you are printing faster.

2 more replies
Answer Match 63.42%

When I print I am getting a blank page between each printed page. Even if my document is one page it prints a blank page after it. I can also print a selected page, as in "print page 2" but it still prints a blank after it. The blank page does not show up on the preview.

I have a HP Deskjet D1300 and am running Vista Home using Word 2007. Is it a printer problem or a Word 2007 problem? Any suggestions?

A:Getting un-wanted blank page between printed pages

I think you may have the printer set to print separator pages.

Look around in your printer properties (Control Panel>Printers>Printername>>Right Click>Properties) and disable.

1 more replies
Answer Match 62.16%

Hello everyone

I recently installed Outlook 2010 and I have got the following strange problem and I was wondering
whether anyone else had the same problem and found a solution.

Whenever I print an Outlook email, the pages come out in reverse order (page 2 then page 1) with a blank cover page which sometimes has "Microsoft Outlook - memo style OUTLOOK.EXE" printed
on the middle of it, and a blank sheet between each page of the message.

It only happens with Outlook. Printing is normal with Word, Excel, etc.

Any suggestions, please?

A:Outlook 2010 emails being printed with blank pages between each page

In Outlook please go to File - Print, highlight Memo Style, then click Print Options button above. In a new window Print, hightlight Memo Style again. Click Define Styles... In a new window, make sure that Memo Style is hightlighted and click RESET button.

If this wont help, click Edit button in the same window, and make sure all the parameters make sense and are correct (page size, etc.)

3 more replies
Answer Match 62.16%

We have a need to find out quickly who is printing and how mucha are they printing to a particular printer. We enabled logging of all spool activity to the event-viewer which records all the printing which takes place through the Printer and gives quite a concise description of what was printed. Is there a way that we could transport this information to some sort of a file where we could get a clear indication as to who has printed and how much as well.

More replies
Answer Match 58.8%

I have an Access database used on daily basis to enter and print the maintenance work order in a report format. I have assigned a command button to print the required record. On clicking the button in the Form, a parameter query will run asking the user to put the record number to proceed. Once the correct record number is entered in the parameter text box, the report is previewed and the user click on the print button to print the same.

My question is as follows:

Is there any method to find out the record i am going to print now was already printed before? A kind of record keeping for the printed records.

Also, a message box should warn the user saying incase if the record was already printed, “The record was previously printed, do you want to continue printing again?”

Please tell me a way to perform the above in my Form.

A:Record keeping of the printed records & warning user when printed more than one time

could't you just add a field in the record for printed?

Then if printeed true, show warning, else show printable form.

2 more replies
Answer Match 56.7%

So earlier today I noticed there was some issue with a lot of pages load pages loading up for me. FOR EXAMPLE.... A lot of pictures (not all)
Appear distorted like so:
In this other image you can see a page loading the HTML code
In an attempt to work this out myself, I updated my java and adobe flash shockwave to it's newest settings. But yeah.... this is where I'm at. Any help would be awesome.
I don't think this is a graphic card issue, as this is actually happening on all my computers.
I'm using the most current up to date firefox.

More replies
Answer Match 53.34%

Hello, I was wondering , what are your guys take on using source code? Obviously it has its advantages, but for professional application development is it a good idea to use it, or is it better to start off from scratch?
I am starting a coding project in OpenGL, and I was possibly thinking of using portions of source code to help reduce the amount of work and time it takes to complete the application.
I'm trying to develop a scientific application for engineers, and I am not sure if it is the best way to go.

A:When not to use source code...?

If its your code, shared code, or code you have license\rights to use there would be no reason not use it. I don't understand the dilemma.

2 more replies
Answer Match 53.34%

I just just wondering how to veiw the HTML souce code of a website in Internet Explorer 9

A:Source Code in IE9

Hello Mitch,

You can press ALT to see the menu bar, then click on View and Source to do so in IE9.

Hope this helps,

3 more replies
Answer Match 53.34%

When I do a right click on a web page, and then ‘view source’ nothing happens anymore.
Not even on my own web pages which are not disabled.

In the past it would show the source OR if the web page was disabled – pop up saying disabled.
The function seems to be gone. I did a restore to an earlier time when it worked but that did not help.

Would anyone feel like giving advice on how to bring back the view source function on web pages that are NOT disabled?

Thank you.

A:'right click - views source' on pages that are NOT diisabled not working

In Internet Explorer, go to Tools>Internet Options>General tab, click on the Delete Files button to clear the cache (when asked, check the box to delete all offline content, too). That fixes the problem most of the time.

If that doesn't work, see this page for other options.

2 more replies
Answer Match 52.92%

I am trying to add some affiliate programs to my site. and having a problem getting the image to show up and the link to work. After several emails to their tech support, came here! This is the HTML that I copied/pasted. (Clicked on the area I wanted the image, then went to 'design/split' view, and pasted the HTML in.)

<a href="" target="_blank" >
<img src="" width="160" height="100" alt="Companyname.Com" border="0"></a>

Their support told me I had to "add the HTML to the source code", and I would have to get that info from my domain host?! Can someone please tell me what is wrong? I do not know HTML, other than the basics. I really want to get this working, is there some code I need to add before & after the above html?
OS is WinXP
Built site using FrontPage 2003. Going to learn HTML!!!-downloaded HTML-Kit awhile ago.
Thanks for any help

A:How do you add HTML to Source Code

13 more replies
Answer Match 52.92%

Hi all, a few things really, is it possible to obtain source code for MSN Web Messenger? If so, where?
Is there anywhere on the internet where I can obtain a port of MSN webmessenger that I can host on a website?

Basically I want to have my own MSN Web Messenger that I can host for everyone I know to use.

More replies
Answer Match 52.92%


I am interested in finding the source code to ping IP addresses preferably in C language. The code I am interested in would continuously ping certain IP addresses and notify with a warning if there is no response. I would like to run this application in a Windows environment.
Really hope you can help


A:Ping Source Code

Well, this would really belong in the developer forum...

BUT, constant PINGing is harrassment. There is no reason that I can think of to want to do it for any other reason. It will cause massive slow down to the system on the other end.

Therefore, I am closing this thread.

If there was something else in mind, please make a new post in the Development forum, and explain in more detail what you are trying to do.

1 more replies
Answer Match 52.92%

This is open source freeware program that was released with source code.

take a look at yahoo cache for reference to the program

the author's page is gone there is only few zips of TClock binaries on the net.
please email it to me at [email protected]

Thank you

More replies
Answer Match 52.92%

hi, I'm the novice... how can I get a virusses source code? for example the new worm's source code; [email protected] [Symantec]...
also known as; Win32.Mydoom.AD [Computer Associates], [email protected] [McAfee], I-Worm.Mydoom.aa [Kaspersky]

More replies
Answer Match 52.92%

This is my first video game. =] It's programmed in Java, and the source code is available.

Purpose: You are the green triangle. You have to avoid getting hit by the green circles that are moving towards you. The game starts slowly, but quickly picks up speed. It is rare to live longer than 60 seconds.

Controls: Place your hands on the keyboard as if you were typing. Your index fingers will move you right or left one space. Your middle fingers will move you right or left two spaces.

f - move left two spaces
g - move left one space
h - move right one space
j - move right two spaces

Have fun! Post your high scores here.

A:QRace - source code available

Fun and addicting..

82 is my highscore.
got 97 just now

3 more replies
Answer Match 52.92%

First off...I am a total technophobe. I stumble through my computing experiences and don't speak the language very well. I have two websites that I developed using plain html. For years I have been able to update them as needed by editing the source code which was on notepad. A few days ago I went to update and there was no more notepad source code, but something new and different that can't be edited. It's in blue and red and breed and black. I know I only did my work in black and certainly not as neat as this is now. I am at a loss as to what to do. I don't know if this is an IE problem or a Windows 98 problem or whatever so I don't know who to talk to about it. I can't swear to it, but I think I may have recently updated to IE8 ( I just sort of do updates when someone or my computer tells me to do so). I really need to get this problem solved soon. Any help will be most greatly appreicated!


A:Can't edit source code

Hey, this isn't much of an IE problem. Just that your .html extension in windows has been re-assigned a default program. To fix this(The basic way):

- Right click the file you wish to edit
- Click Open With...
- Click "More Programs..." (or whatever it says along the lines of that)
- Choose notepad in the box that pops up, and tick "Use this program as default"
- Click OK.

Alternatively download and install Notepad++ and open the HTML files in that.


3 more replies
Answer Match 52.92%

Hi everyone.
My friend and I have a tech start up and are on the verge of hiring our first employee. The employee will have extensive coding experience and will be the one ultimately to code and program the entire website.
As neither one of us has IT background and the candidate will know this too, is there a way we can protect this code? (For example, something out there that we can make the code reliant on so without the something else, she can't operate the code) Or a way we can prevent any modification or transfer of code without our authority Please assist us! Any advice or suggestion is helpful and will be greatly appreciated!!!

A:Source code protection--- help please!!!!

Check with a Trademark authority.  Along with getting a Trademark, it's a matter of day by day trusting one another.  Take time to learn bits and pieces of what the coder is doing, appreciate, and stay interested.

3 more replies
Answer Match 52.92%

hello. i just have a quick question. nothing too big so dont worry. i'm not even sure i have the "jargon" correct in my topic title.

you see, one time i remember my friend told me that some things in windows. like folders, use html. KINDA.

cause you know you can customise your folders right? in windows? mainly 98 cause right now i can't seem to find that option in xp.

it says something like "customise like webpage" or SOMETHIGN like that. lol.

anyway. i would be able to right click, after setting a background for my folder, and my friend says its html but i remember it looked pretty complicated and diffrent.

anyway. so far that's all i know. what i'm trying to get at, (if i havent confused you already) is, i'd like to customise a few things about a certain folder i created.

the folder was created because i created a new TOOLBAR in my windows desktop. and there are TWO things which i'd like to do that i cant.

one of them is LOCK the toolbar.

its really easy to do that in my bottom toolbars but it doenst work for the new one i made which i placed APART from my bottom "start menu" toolbar and named "taskpane". i placed it on top, set it to auto hide, made the icons large, took away title bar title, and left the icon text. looks really nifty and i put ALL my shortcuts there so they wont clutter up my neat wallpapers.

so tha'ts done and done. but what i cant do as i've mentioned is LOCK IT. t... Read more

A:windows source code??

7 more replies
Answer Match 52.92%

Don't know if this is the right forum topic or not, I am just trying to see how people work out the value on their source codes. Any help would be greatly appreciated.

We have an ex-client, who after they left us went to one of our competitors. After two years they are unhappy with them. They rang us the other day and asked if they could purchase the source codes for our software products. They want their in house IT team to take what we have created and develop it for their use only.

The products they want the source code for are our core products that we still sell, still develop on. It is a set of products that have had almost 20 years spent on developing them. We are on the 8th version of the original software, about to go into the ninth next year.

They have given us a number that they are willingly to pay, it is around about the price my husband thinks is appropriate, i think we are under valuating it. To purchase the products they want without source code would be between 100 to 150k, they want it for around the 200k mark, my husband thinks 250 to 280k. So how do I go about figuring out what 20 years with a team of 4 programs took to build (we still sell on a regular basis yearly) to make sure we get a fair price?

A:Placing a value on source code.

Welcome to TSG yank!
My random thoughts...
I would not sell the source code to a product that is selling on a regular basis. It has a future resale value. They can pony-up and buy the product and pay for customization.

You never know if some rogue programmer there will decide to strike out on his own and start selling the product for 10K and damage your business. Yes you could go to court and win but I wouldn't risk the exposure. I guess, in the contract, there could be a 'damage' clause if you can prove they let the software out? Or if they themselves try to sell some version.

If your determined to sell.
You could look at it like your selling the business, standard formual is Revenue X 3 + Assets. That would put the price at 300K minimum(selling it for 100K without source code).

You can also make a case for value-addeds, such as design notes, coding doucmentation, schemas, etc... these are probably worth as much if not more than the source code itself. How well are you prepared to sell the code?

I would give up on putting a value on 20 years of development. You have allready paid for that and have profits to offset that cost. A more relavant question is how much would it cost for the company to develop it. They apparently think its more than 200K

1 more replies
Answer Match 52.92%

Source code for windows is basis on windows or is basis on BASIC, I think is basis on BASIC

A:Source code for windows

The Windows source code is written in a number of languages. But I doubt that Basic is one of them.
If you could more fully describe you question you would get a batter answer.

4 more replies
Answer Match 52.92%

Is there any software available to encript all the html code?

A:Source Code encription

8 more replies
Answer Match 52.92%

when I try to print anything from off the web I get very fine print over 7 pages (approx) which I have been told is html source code. Could anyone please tell me how to change it to normal print. Thanks

More replies
Answer Match 52.08%

Since changing my internet supplier, I've had problems with printing anything out from the net.
Everything that prints out when printing directly from a web page, prints out as source code, and the page does not print.
However, if I save the text to Word, or the pictures to Paint, I can print out OK

This is driving me mad, as I've already spent hours of my time and money in speaking to the ISP people at Tiscali, but nobody can help. The following suggests that Windows XP home might be to blame.

I've tried different computers, different printers, both inkjet and laser, but all appear to do the same - EXCEPT - one old machine that runs Windows 98. This printed the pages OK, even though it was connected to a printer which had been printing out only code previously. So....I assume that it is something to do with my XP settings, but I've no idea which.

Help anyone ?

A:Printers will only print source code

Did you every find the cause? I have a computer that just started printing only the source code and I have yet to figure it out. -Joe.

2 more replies
Answer Match 52.08%

I use Outlook Express 6 as my email client. I receive many emails containing graphics and formatted text that I would like to tweak a little, before forwarding them. I KNOW that I can edit text and delete some elements but I also know that things like the length are very hard to change. I also know that the format controls are locked into the CODE that is exposed when the SOURCE tab is clicked. Short of doing a course in HTML, I believe I can learn some basics about email source code, by tweaking it and seeing the results. But to document what has been tweaked, I should ideally be able to copy the source code UNCHANGED-by-the-copy-process into e.g. WORD or a Rich-Text-Format editor. I have not found any editor that I can paste source code into and have the copy look identical to the original. I thought FrontPage might do the trick, but it wont open EML. Is there a way of doing what I want to do ?

A:Copying email source code

You need to view the source of the message via the message properties which can be done by right clicking message in the listing above the viewing pain.

1 more replies
Answer Match 52.08%

I need help locating kernel source code directory, said it is located at /usr/src/linux, but it is not there. The reason I'm asking
is I'm trying to install something "client for wireless accsess to net" just a progam to access the web through my school, It is asking me for linux kernel source code directory so it can build some kernel module.Where is it located, or are there any alternatives?

A:linux kernel source code

Did you actually install the kernel sources package in the first place?

3 more replies
Answer Match 52.08%

I have just upgraded to IE 7 and have gotten used to using the view source code option from tools on IE6 .So for some reason I cannot do this on 7 .When I try to view the source code by going to , Page , view source , It tells me windows cannot find notepad.exe.
All I get is a error message.Any one know what the problem is????
I use this for editing and its a problem for me!

A:Explorer 7 , cannot view source code.

have you tried using a different text editor? editpad light, notepad2 and using that?
I am not certain, but I think IE 7 overrides your default editor and sets it to notepad.

I would re associate your text file to open with notepad or a different prg and see if that works. You can always set it back.

1 more replies
Answer Match 52.08%

My problem is basically like this..

When i right click on a website and choose "view source" nothing shows up. Even when i try to access it via View->Source.

I tried system restore but it didn't fix the problem, any suggestions?

i'm using Windows XP and IE 6
any help is much appreciated

A:IE won't show source code of site

8 more replies
Answer Match 52.08%

Hi - In my browsers (IE, Firefox, & chrome) when I look at a webpage's source code there are about 700 lines of code that should not be there. I have asked others to look at these pages and they don't see it. I did a malware & virus scan and nothing showed up.

Below is a link to an image of part of the code - it is even on this page!
After opening, right-click to view the original size -
Thanks in advance for any help.


More replies
Answer Match 52.08%


I get the message below when I try to open the program in Access 2000 on the user's machine.

Source Code Control

You don't have a source code control program (such as Microsoft Visual SourceSafe) installed on your machine.The source code control commands are therefore not available.

Do you want to see this warning again?

Even I click "No" , i get this same message.

How could I solve the error message? Please help...


A:Source Code Control Error

Hey there, welcome to TSG.

I may be mistaken, but I don't think that error is actually generated by Access. Usually source control clients are stand-alone applications that you can install on your computer and configure to interface with your development environments. That might sound like a lot of jargon, but the gist is this: Access is probably trying to interact with a program that has been removed or only partially installed/uninstalled. I'm pretty sure Access doesn't have native source control.

With a partial install or uninstall, oftentimes there are leftover registry hooks that cause annoyances like this. Clicking "No" probably has no effect because the application that is supposed to handle the user response doesn't exist; however, you continue to see the message box because the registry hook does still exist.

Mind, this is purely speculation on my part. I'd like to see some other opinions on the matter.


2 more replies
Answer Match 52.08%

Hi everyone.

My friend and I have a tech start up and are on the verge of hiring our first employee. The employee will have extensive coding experience and will be the one ultimately to code and program the entire website.

As neither one of us has IT background and the candidate will know this too, is there a way we can protect this code? (For example, something out there that we can make the code reliant on so without the something else, she can't operate the code) Or a way we can prevent any modification or transfer of code without our authority Please assist us! Any advice or suggestion is helpful and will be greatly appreciated!!!

A:Source code protection, need help ASAP!!!please


Originally Posted by Amanda389

Hi everyone.

My friend and I have a tech start up and are on the verge of hiring our first employee. The employee will have extensive coding experience and will be the one ultimately to code and program the entire website.

As neither one of us has IT background and the candidate will know this too, is there a way we can protect this code? (For example, something out there that we can make the code reliant on so without the something else, she can't operate the code) Or a way we can prevent any modification or transfer of code without our authority Please assist us! Any advice or suggestion is helpful and will be greatly appreciated!!!

Welcome to TF,


Other than protecting the code legally, the person will be able to use it and anyone who wants the code will be able to reverse engineer it or just copy it.

2 more replies
Answer Match 52.08%


I'm looking for a tool that can be utilized by daily build to encode our assemblies.
It should prevent of decoding our code by disassemblers.

I need something like:

Is this the best we can have?

More replies
Answer Match 52.08%

Hi All can any one tell me how i can get the source codes from files and folders on windows 10?
i will be waiting for answer!

More replies
Answer Match 52.08%

We login to a particular website, and on the pc we need it to work on it comes up with this
<html><head><title>Error 401.1</title><script type="text/javascript" src="js/custom_webgate_error.js"></script></head><body onload=oblixError("IC01")></body></html>On another pc it works just fine. Using IE9, and would prefer to stick with IE9, haven't tried another browser. Tried resetting and restoring advanced settings.

A:IE9 displays what looks like source code on one pc, fine on another

I have no idea if what I'm about to suggest will fix the issue, but download this tool...
SF IE Restorator - Troubleshooting General Issues with IE
...and try the applicable Re-register button.

1 more replies
Answer Match 52.08%

Microsoft Source Code now on the Internet

Microsoft reports that parts of the tightly guarded blueprints of its Windows operating system have been leaked over the internet.

A:Microsoft Source Code now on the Internet

slightly old news

this is the original version of that report from October 2000

3 more replies
Answer Match 52.08%

Hi all:

I wanted to install dial-up People PC on my son's HP - he's running XP-

He had Netzero- and was having connection problems, although it worked 85% of the time.

I deleted all Netzero program components first, then tried to install dial-up PEOPLE PC with their free disc.

It starts to install ,gets about 32% then a message says
ERROR 1706 - cannot find source code for BartShel or cannot find source code for "hpapp-----" something or other.

Each time it says to try to find the app in another location and try to open from there- but the same error code comes up.

Can you help me? Should I NOT have deleted Netzero first?

Thanks in advance.

A:Error 1706 source code

I would go to people pcs website and see if they have a downloadable version which could be burned to cd or saved to a flash drive. Then try to install it.

I don't think it had to do with deleting Netzero unless a shared dll file was deleted. Usually the system warns you before allowing you to delete dll files.

4 more replies
Answer Match 52.08%


i m currently doing a project and the topic for my grp is aircraft simulation. hence, i urgently need a sample source code/algo. i need to know about collision avoidance algo. too. will appreciate it if anyone can tell me where i can find these info.


More replies
Answer Match 52.08%

I was working on my 72 Nova today and the lady next door calls me over. She says ever since she moved from AOL to Bellsouth DSL she has had this problem. She is on Windows XP Home Service Pack2 and Internet Explorer 7. When she attempts to print a web page it will only print the web page source code.

I can't seem to figure out what is going on. I looked at the IE config but can't find anything that would print out the source code versus the web page image. I also looked at print preview and it also showed the source code.

Have any of you ever seen this? Thanks for any input here!

A:IE7 prints web page source code

Is it just on one web page or on everyone?
What Security programs are installed on the computer?

1 more replies
Answer Match 52.08%

I am writing a Web App in HTML, CSS and JavaScript. I am afraid the source code is getting too big. Do you know if there's a limit to the source code size? Can there be any problem if source code is too big?

It will run on IIS 6.0 or something around that version.

More replies
Answer Match 52.08%

Part of my code:
Circle c[][] = new Circle [2][];
c[0] = {new Circle(), new Circle()};

I am getting illegal start of expression under {

A:Solved: Java source code

Try instead
c[0] = new Circle[] {new Circle(), new Circle()};

3 more replies
Answer Match 52.08%

I have found that some basic functions in the windows headers are VERY slow. I would like to make my own sin function to test it out but I have no idea how. Please help me make a sin function.

A:Want source code for cmath's sin function

9 more replies
Answer Match 52.08%


Just wondering if anyone could tell me the best place to go if I wan't to get some source code (prefferably C or if not C++) which will compile for Windows platforms (not Unix). I tried a web search and most the sites were all a bit crappy.

Thanx, Kona

A:Source Code for Windows Platforms


#include &lt;stdio.h&gt;

printf("Hello, World!\n");

this should compile with just about any C/C++ compiler and run on just about any platform... could you be a little more specific? What are you trying to accomplish?

2 more replies
Answer Match 52.08%

Using Thunderbird 17.

I've been trying to make filters to block all these horny housewives, teenage girls looking for 66-year-old men and tallywhaker hardener and enlargement scams and the people who are sending this crap are putting almost nothing targetable in the visible fields but I have found plenty in the source code -- if I could filter by text in source code.

Is there a way?

A:Thunderbird filters that look at source code?

15 more replies
Answer Match 51.66%

Hi Guys!

Can Anybody provide me with NVNC (.net VNC) SERVER SOURCE CODE.Client source codes are available but couldnt get NVNC Server source code...I need it for a project.Please help me!

More replies
Answer Match 51.66%

I am having trouble with a page showing up with Internet Explorer on PCs with spacing issues. I have a page with some wording on top, menu down left side, and sponsor logos down right side. There is a table in the middle with a 3 day schedule in it. When viewed with IE on a PC, the schedule shows up under the long list of sponsor logos running down the right side. On Firefox or Safari, the schedule shows up in the middle, in the correct place right under the wording at the top of the page. What is it reading in the code to cause this? Thank you for any help anyone can provide.

A:IE reading source code of page goofy

is this your website?

5 more replies
Answer Match 51.66%

The source code that powers the ?Internet of Things? (IoT) botnet responsible for launching the historically large distributed denial-of-service (DDoS) attack against KrebsOnSecurity last month has been publicly released, virtually guaranteeing that the Internet will soon be flooded with attacks from many new botnets powered by insecure routers, IP cameras, digital video recorders and other easily hackable devices.

The leak of the source code was announced Friday on the English-language hacking community Hackforums. The malware, dubbed ?Mirai,? spreads to vulnerable devices by continuously scanning the Internet for IoT systems protected by factory default or hard-coded usernames and passwords.

Vulnerable devices are then seeded with malicious software that turns them into ?bots,? forcing them to report to a central control server that can be used as a staging ground for launching powerful DDoS attacks designed to knock Web sites offline.

The Hackforums user who released the code, using the nickname ?Anna-senpai,? told forum members the source code was being released in response to increased scrutiny from the security industry.

?When I first go in DDoS industry, I wasn?t planning on staying in it long,? Anna-senpai wrote. ?I made my money, there?s lots of eyes looking at IOT now, so it?s time to GTFO [link added]. So today, I have an amazing release for you. With Mirai, I usually pull max 380k bots from telnet alone. However, after the Kreb [sic... Read more

A:Source Code for IoT Botnet ‘Mirai’ Released

Unfortunate that this was dumped to the public, but on the
upside this allows experts to comb through the code and hopefully
create a better defense for dealing with it.
Great share FrogMiester

1 more replies
Answer Match 51.66%


I'm working on some source code, and my a** will be grass if a hacker or someone obtains it. The PC could be offline, but often I need to find coding solutions online, so I would need to copy & paste such code text to the secure offline PC. I'm stumped how to achieve that in a hack proof manner except with a thumb drive. That is, use the online PC to find the code, copy text to thumb drive, move drive offline PC, but that sounds like a big pain.

Another option is to use software that runs two simultaneous OS's that allows text to be copied between them, but how hack proof is that? Maybe encrypting the secure PC drive?

Any ideas would be greatly appreciated,

Edit: Ah ha, is this the solution, a unidirectional network via some hardware? I think the data line needs to be controlled by hardware to be as secure as possible.

If anyone could post or send me a PM recommending any hardware, then I'll greatly appreciate.


A:How to secure source code while keeping Internet

hmm; taking the issues from the top:

1) you need to ensure that code on your PC never leaves its.

2) if it does, you are exposed ( I assume from your employer )

3) you want to copy paste code from the Internet into 'your code' safely​
I'll start with (3). Code from the Internet may expose you to copyright infringement and thus your employer could be sued - -
I've seen this happen personally and it is ugly.
You lose your job, your friends lose jobs, and the employer can actually go bankrupt.
summary: not worth the risk

(2) Working at home on software that belongs to your employer is a real nightmare,
not only from (3) but you might become a mule for some trojan infection when that code is returned to the project libraries.
If that occurs, the date/time of your checkin of the new code will correspond to the time of the virus and tag, you're it.

(1) the only way to ensure that something never leaves the PC {better said is not useful if it leaves},
is to
a) go offlineb) encrypt it for protection, perhaps even altering the file name​c) go online and browse, fetch what you will
d) go back offlinee) decrypt the code in question
f) modify said code and prepare it for transport back to the project libraries.​summary: only access that code while offline

REPEAT: not worth the risk

2 more replies
Answer Match 51.66%

Hi. I've just tried to download Perl and compile it from the source code. I think it's written in C, but I've got no idea how to get it into binary that Windows can read. Can anyone tell me how; the binary/ActivePerl version doesn't seem to work for me.

More replies
Answer Match 51.66%

Hi all -

Cannot get IE7 to print the web page. It only prints the web page source code.

The following sample of a printout is what prints for me from the Google home page at I just click print and get this (only showing the first part as I don't think you need to see all the of source code)


<html><head><meta http-equiv="content-type" content="text/html; charset=UTF-8"><title>Google</title><style>body,td,a,p,.h{font-family:arial,sans-serif}.h{font-size:20px}.h{color:#3366cc}.q{color:#00c}.ts td{padding:0}.ts{border-collapse:collapse}</style><script>
<!--{kEI:"bhHwRvDJDJyajgHIrLjsBg",kEXPI:"17497",kHL:"en"};function sf(){document.f.q.focus();}
window.clk=function(b,c,d,e,f,g){if(document.images){var a=encodeURIComponent||escape;(new Image).src="/url?sa=T"+(c?"&oi="+a(c):"")+(d?"&cad="+a(d):"")+"&ct="+a(e)+"&cd="+a(f)+(b?"&url="+a(b.replace(/#.*/,"")).replace(/\+/g,"%2B"):"")+"&ei=bhHwRvDJDJyajgHIrLjsBg"+g}return true};// -->


Running IE7 on WIN XP Pro fully patched. On a network but I have full admin rights. I also rule out the network printer settings as I get the same source code in a print preview as when I do an actua... Read more

A:[SOLVED] IE7 only prints page source code

Hello and welcome to TSF

Have you tired to reinstall IE?

Re-install Internet Explore 7
Please go Here (Click on the Blue link) and download a fresh version of Internet Explore 7.
Uninstall the version of IE you have installed now, to do so follow these steps:
Click Start
Click Control Panel
Double click Add or Remove Programs
Scroll down until you find Internet Explore
Then click Change/Remove, and follow the prompts.
** Please Note: If you are unable to see IE7 in Add or Remove Programs follow these steps:Click Start
Click Run
Type or copy and paste, into the text box:
Then Press Enter **
Restart your computer.
Install the fresh version of Internet Explore.

4 more replies
Answer Match 51.66%

The quality and security levels of open source code are continuing to improve, according to the latest annual audit by code analysis tools vendor Coverity.
The third edition of the Coverity Scan Open Source report measured a 16 per cent reduction in static analysis defect density over the past three years among the projects subjected to scrutiny, including Firefox, Linux, PHP, Ruby and Samba. The report covers analysis of more than 11 billion lines of code from 280 open source projects.

Link -
Open source code quality improving ? The Register

More replies
Answer Match 51.66%

IE8 presents source code NOT html rendition, etc.?

I have a webpage (html) in a folder on my PC that I use as a "startup" page for all my browsers (Firefox, Palemoon, Chrome, IE8). I have been using this method for over 10 yr for quick access to my most important Web & other links. I bring up any browser, my important links are ready-go-go, FAST.
1) When I use this webpage as my "startup" page for IE8 & it renders only as 'source code' NOT the actual HTML page as it does in my other browsers.

2) Also,something odd happens to Word Doc links on this HTML "startup" page that are in folders on my PC's HD, the Word Doc file is NOT opened, but downloaded to my 'downloads' drive. I sense this is caused by new browser security updates that will not allow files on the PC's HD to be opened in a browser. This is only a guess.

Does anyone have a fix/answer to either problems indicated above?



---(_)/ (_)
* * * * * * * *

More replies
Answer Match 51.66%

Whenever I try and view the source code behind a webpage in Internet Explorer I get this error message:

How do I resolve this problem??

Please Help

A:Can't view source code on Internet Explorer

Make sure notepad.exe is actually in C:\windows\system32
Sometimes a trojan may alter the file, in which case antivirus may delete it.

2 more replies
Answer Match 51.66%

Yes you read that title correctly and no this is not a joke.
I have obtained via a friend who we will call "Bob" <- not his real name worked at M$ and was able to get me the source code for this hardware before m$ sent it all the way of the dodo.
I was hoping to be able to use this to make a set of drivers for newer windows versions both 32 and 64 bit but
alas i have no knowledge of coding drives for windows if anyone who would like to give it a shot and may have prior
exp. with windows coding or driver coding here's your chance to shine!
Source Code is Attached to post.

A:M$ Sidewinder Strategic Commander Source Code

Oh BTW This Code Seems to Be In C Sharp So Good Luck!

1 more replies
Answer Match 51.66%

Cisco Source Code Reportedly StolenWhile it is extremely difficult for crackers and hackers to read and find vulnerabilities in source code, this concern should be noted and the Cisco IOS system should be kept up to date for the best levels of protection. Cisco Source Code Reportedly Stolen,1759,1593870,00.aspThe FBI confirmed Tuesday that it is working with Cisco Systems Inc. to investigate the possible theft of source code for Cisco's main networking device operating system. According to a Russian security Web site, criminal hackers broke into Cisco Systems' corporate network last week and stole 800MB of source code for IOS 12.3 and 12.3t (an early deployment version of the operating system containing features not found in the vanilla 12.3 version). In addition, a 2.5MB sample of what is supposedly IOS code was released on an Internet Relay Chat channel as proof of the alleged theft.

More replies
Answer Match 51.66%

Hi. I use a public computer to brows the net but I can't see the source of of webpage. Do you know how to make it avaible?
The right-clicking is also unavailable.
It's Windows XP, IE version 6.

A:View Source code feature unavailable

A public computer? Obviously restrictions have been set up on that system.

1 more replies
Answer Match 51.66%

Hello everybody!

Few days ago my firefox gone crazee instead of loading the actual page
it loads the source of the page i tried everything but no help..

maybe one of you got an idea what the heck it could be?

P.S. - The browser is on windows xp machine

A:Browser load source code instead page

Does this happen on every webpage or just one? How about other browsers?

1 more replies
Answer Match 51.66%

Is there any way to extract the source code from a VB executable file?

A:Extracting source code from executable files

7 more replies
Answer Match 51.66%

I want Customize LCDS for My Country (I Need source code) its Possible or Not 

More replies
Answer Match 51.66%

Am trying to create stationary with a background image and I cant get the Notepad to save the new source code.
I have to modify the source to prevent multiple images. Clicking on File and save just doesnt save.
The addittional coding I am inserting is
background-position:centre centre; background-repeat:no-repeat;background-attachment:fixed;

I have used this coding successfully with XP but for some reason its not co-operating with Win 7.
I'm also getting a window telling me I cant run Active X when I try to create a new email message with this coding.
Active X is definately enabled and security settings are set at Medium.
What am I doing wrong please?

A:Outlook 2003 stationary source code

I can do what I want in ie6 with XP, could it be the problem is with trying to do it in ie8?

1 more replies
Answer Match 51.66%

I have created html code for an email I want to send. The email has an internal stylesheet included in it and 2 columns of text. In the basic program Outlook Express I have been able to add the html code by editing the source code of the email. However in Outlook 2003 I don't seem to be able to do this. Is it possible?

Thanks in advance for any thoughts.

More replies
Answer Match 51.66%

So this is the first virus I've seen that targets developers!My NOD32 a few days' ago started showing that my source code folders were infected with Fujacks, and were embedding IFRAME source in my C# .aspx files. NOD32 wanted to completely delete my source code, so rather, I just removed the IFRAME references the virus put in the text (remembering that .aspx files are simple text files, nothing more.)Next day, same routine. This time I allowed NOD32 to kill the offending files.Next day, it returned, and so it continues ad nauseum. I've tried to search through the registry and system32 folders to find the virus, but I'm buggered if I can find it anywhere!Coming to the brightest minds on the internet for this sort of thing, I humbly submit my attach.txt file for the Brainiacs out there to tell me what part of my computer is giving me so much grief.Yours in code, NonSapiens

A:Fujacks! (and its attempts to rewrite my own source code)

No-one interested in helping me out here?===========Hello While we understand your frustration at having to wait, please note that Bleeping Computer deals with several hundred requests for assistance such as yours on a daily basis. As a result, our backlog is quite large as are other comparable sites that help others with malware issues. Although our HJT Team members work on hundreds of requests each day, they are all volunteers who work logs when they can and are able to do so. No one is paid by Bleeping Computer for their assistance to our members.Further, our malware removal staff is comprised of team members with various levels of skill and expertise to deal with thousands of malware variants, some more complex than others. Although we try to take DDS/HJT logs in order (starting with the oldest), it is often the skill level of the particular helper and sometimes the operating system that dictates which logs get selected first. Some infections are more complicated than others and require a higher skill level to remove. Without that skill level attempted removal could result in disastrous results. In other instances, the helper may not be familiar with the operating system that you are using, since they use another. In either case, neither of us want someone to assist you who is not familiar with your issue and attempt to fix it.We ask that once you have posted your log and are waiting, please DO NOT "bump" your thread or make further replies until it has been res... Read more

3 more replies
Answer Match 51.66%

Looking at firmware Beacon Storage is based on i686 build of Fedora 16. However it ships modified kernel, mplayer, XBMC and e.t.c. components. Legally Lenovo is obliged to release source code for modified GLP components but I can't find any link to modified source code. So here goes a question: Where can I find a link to modified GLP source code that lenovo ships with Beacon Storage.

Go to Solution.

A:Where is Lenovo Beacon Storage GPL Source code

Hi, thecus N2520 has similar firware and spec I think you can find gpl there

5 more replies
Answer Match 51.66%

IRC server had backdoor in source code for months.

The developers of the open source IRC server UnrealIRCd have had to report that the file servers of the project were compromised several months ago and the IRC servers code, Unreal3.2.8.1.tar.gz was replaced by a version with a backdoor. The backdoor allows anyone to execute commands on the server running UnrealIRCd, with the privileges of the user running the IRC daemon, even if the IRC server is a hub or requires passwords to access it normally. According to the report, the version with the backdoor was apparently placed on file servers in November 2009, but remained unnoticed until now.

All the more reason to moderate source code control systems w/peer review prior to actual installation with restricted permission for writing.

-- Tom

More replies
Answer Match 51.66%

briefly speaking. A few days ago I hired someone on the web to make a website for me . It'a simple shopping website together with an admin control panel that I can edit products.

However, his after-sale service is extremely bad. He has sent me a pack of files that he claimed to be able to install the shopping site to any other hosting service.

However he refused to provide instruction. I'd like to know how to install a pack of source code to any other web hosting?

Thank you

More replies
Answer Match 51.66%

Hi there!

I need to change my ShowDesktop button's source code. Do you how can I do that ?

best regards,

A:How can I change the ShowDesktop button's source code ?

Quote: Originally Posted by bumaran

Hi there!

I need to change my ShowDesktop button's source code. Do you how can I do that ?

best regards,

Just curious but why on earth do you want to do that?
But if you want to remove it then there is a small prog. here:
that will do that!

9 more replies
Answer Match 51.66%

Dear friends,
1) Today is a red letter day in Microsoft's glittering journey to the summit of success! MS has turned over the entire source code of Windows 7 to russian Government and also to NATO,China and India!

The link article is from :


This was first reported by Tom Espiner. :

The scenario is complex, with experts claiming that,A) "Distros" of Win.7 can emerge,especially in countries like India,China and the African countries where owning a computer is considered an upgrade in one's status!

B)The recent swapping of secret agents between USA and RUSSIA proving that mutual suspicion still exists and code hacking being the speciality of the Russians is a nightmare!

C) MS claiming that handing over of source-code was done right from versions XP,2000 and on! This is a Twister and a typhoon of a news-break with MS claiming that it has been it's policy since?

D)Cambridge security expert--> Richard Clayton has dealt with in detail about the implications in the second link.Here is an example!

Clayton said there were hundreds of thousands of bugs in Microsoft products,essentially due to the SHEER VOLUME OF THE SOURCE CODE! He made the MOST VALID POINT that ... Read more

A:Wanton leak of win.7 source code to russia!

Thanks for the article, Perfume.
Hope you get over the flu quickly.

2 more replies
Answer Match 51.66%

Do not click on link! I am having trouble finding a way to remove it as a hyperlink to prevent users from clicking on it. hxxp:// went to this link, and my browser was resized and started bouncing all over the screen while simultaneously playing Never Gonna Give You Up by Rick Astley.While this seems like a joke website hosted on a free web hosting server that just logs IP addresses, I am wondering if something malicious such as malware, viruses, spyware are installed when one clicks on the link. I initially found the link on a self-professed hacker's YouTube channel who has compromised numerous accounts. If anyone can take the time to analyze the source code, I'd greatly appreciate it. The source code is about one or two pages long, the lyrics for the song take up most of it. Best Regards,<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "">

<meta name="google-site-verification" content="-hoHw9fPs8z5NKSCGS6RonJEs8tq_FiTLRSDVx4PC44" />
<meta http-equiv="content-type" content="text/html; charset=utf-8"><title>Rickroll!</title>

&lt;script type="text/javascript">
if (self.parent.frames.length && self.parent.frames.length != 0) self.parent.location = document.location;
neva = "WE'RE NO STRANGERS TO... Read more

A:Is the source code of this small webpage malicious?

I took the liberty of saving the source code into a text file, and then scanning it using Jotti Malware scan. The results that a few virus scanners provided is that it is Joke.NoClose.JS.A. or Malware.JS.Achtung.A.Apparently it's a joke program that from what I know has no malicious codes in it, or won't harm your computer. However, I assume malicious code could be integrated into the program. But the site has logged IP addresses, and in the hands of these malicious users, this could be dangerous. DDOS attacks, port scans, nmaps, stalking, packet sniffing, etc...

2 more replies
Answer Match 51.24%

I am looking for (HDD Firmware Serial Number Source Code 1.01) program to read and change serial number of
my hard disk and it's firmware. Any one knows where to find it or know of a similar program please let me know. It used to be here:

Steve (HDD Firmware Serial Number Source Code 1.01)?

google my friend

1 more replies
Answer Match 51.24%

I am trying to understand the behavior of a small utility that I wrote using the Visual C++ compiler (circa 2000 version). The program is intended to be executed from a command line or from a batch file. It takes one argument, that can be passed on the command line, or if absent, the program prompts for the file name. Normally the file argument is specified as a full file path, which can get rather long.

The problem is that the program executes correctly or fails, depending on the length of the file path\name that it receives. The relevant code is below:

// Get input event file name and open the file.

if (argc == 2) // if there is exactly one command line argument
cout << "Editing " << argv[1] << "\n";
strcpy(infile_name, argv[1]); // take it as the filename to be edited
else // prompt the user for the file name
cout << "\n\nEnter the name of the file to be edited - "; // get file from operator entry
cin.getline(infile_name, 255); // will be renamed with .BAK extension

strcpy(outfile_name, infile_name); // new file inherits the original file name

if ((infile = fopen(infile_name, "rb")) == NULL)
wait("\n\nERROR - Unable to open the specified file\nEnter any key to exit...");
return(1); // exit - can't open input file

// read file fixed and variable hdr data from input file

fread(&fix_hdr, sizeof(f... Read more

A:Solved: Program sometimes fails to follow the source code (?)

If anyone out there cares, I managed to resolve this problem by changing one line in the program, that assigns argv[1] to infile_name.

strcpy(infile_name, argv[1]);

was changed to

infile_name = argv[1];

With that change, the program doesn't occur. But I have NO IDEA why.

1 more replies
Answer Match 51.24%

Hey, I was typing an assignment on microsoft word 2010 and then I got the BSOD; I'm not the best with computers so i'm not sure what to do.

A:BSOD source: Kernel-Power, bugcheck code 209

With the necessary information we can help.

1 more replies
Answer Match 51.24%

I want to ask about porting / converting ancient (20 years old!) dBase / Clipper source code and files to Modern Windows XP environment.

Should I use Codebase and re-compile the program for Microsoft C?

Is there any other better / simpler ways to port text only applications?

Thank you.

A:Porting dBase/Clipper Source Code And Files

Are you asking if there's any way of automatically converting the source code or you asking whether you you should rewrite the application. Codebase will not convert an XBase DOS program to a windows program. From what I understand Codebase is a library that allows you to manipulate XBase databases (DBase, Clipper, Paradox etc) with a windows language such as Visual Basic.

1 more replies
Answer Match 51.24%

dont know where to put this but...

i am trying to make a web chat. and with ATL. I want to make a web service that get the job for Real time protocol. i could not get how to start.

if you know about it please write some of your views

A:How to make the program like MSN messenger, sharing for source code of msn

I think the programing forum may be of more help with this. I'll send you there.

2 more replies
Answer Match 51.24%

I need a routine callable from either C or Visual Basic that can turn on and off 1 note at a time using MIDI code sent through a USB port. This is going to be used for a tuning program that helps tune a small Pipe Organ. I am using Visual Basic which could call a C routine to do this. I am using a laptop with windows 7 see details below. I have several caned programs that will play music from MIDI files through the USB interface and run the Pipe Organ. I could either modify one of those programs if I had the source code in C or Visual Basic or write my own routine. I do have a MIDI handbook and can figure out the code, in time. I have not found routines for sending information to the USB port. I am not good at navigating the Microsoft website to find this kind of information (I've tried!). I'm not as good as I used to be at digging through huge volumes of information to find what should be fairly simple routines.
Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 4046 Mb
Graphics Card: Radeon HD 6470M, 1024 Mb
Hard Drives: C: Total - 456223 MB, Free - 302679 MB; E: Total - 15291 MB, Free - 2285 MB; F: Total - 5103 MB, Free - 2126 MB;
Motherboard: Hewlett-Packard, 1618
Antivirus: Microsoft Security Essentials, Updated and Enabled

More replies
Answer Match 51.24%

Symantec acknowledges a breach that exposed the source code for pcAnywhere. Users are advised to disable it immediately until software updates are available to resolve vulnerabilities.

Security recommendations include:
Symantec recommends disabling pcAnywhere until they release software updates that resolve ?currently known vulnerability risks.
As far as the other source code exposure related to the 2006 versions of the Norton products as detailed in their statement above, Symantec says that the ?code in question represents a small percentage of the pre-release source for the Symantec AntiVirus 10.2 product, accounting for less than 5% of the product.? They recommend only that customers update their AV definitions and follow general best practices.


Symantec says to disable pcAnywhere after source code exposure by Anonymous | TechRepublic

A:Symantec says to disable pcAnywhere after source code exposure

There's been some discussion of this on the Norton Users Beware ! thread

1 more replies
Answer Match 51.24%

I already have integral types down. Tell me what you think:

Does anyone know how ostringstream converts floats and doubles to strings?

A:Source code to convert float and double to string

6 more replies
Answer Match 51.24%

Hello again ... I think that I could learn C++ if I could see practical examples.

I mean: Well-annotated source codes of many different programs, at a beginner level, each one illustrating a key C++ theme.

Any suggestions for finding something like this on the Web?

Thanks ... RB

A:Seeking C++ Examples (well-annotated Source Code) for Beginners

u can mail title on [email protected] and you get a code within a day.

1 more replies
Answer Match 51.24%

Hello. I need find and change link to the image in the source code of the page.

As you can see in this example, it is very easy to do.

But how i can do this here?

More replies
Answer Match 50.82%

Logfile of Trend Micro HijackThis v2.0.2Scan saved at 16:40:42, on 12/11/2009Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)Boot mode: NormalRunning processes:H:\WINDOWS\System32\smss.exeH:\WINDOWS\system32\winlogon.exeH:\WINDOWS\system32\services.exeH:\WINDOWS\system32\lsass.exeH:\WINDOWS\system32\svchost.exeH:\Arquivos de programas\Arquivos comuns\BitDefender\BitDefender Update Service\livesrv.exeH:\Arquivos de programas\BitDefender\BitDefender 2009\vsserv.exeH:\WINDOWS\System32\svchost.exeH:\WINDOWS\system32\LEXBCES.EXEH:\WINDOWS\system32\spoolsv.exeH:\WINDOWS\system32\LEXPPS.EXEH:\Arquivos de programas\Arquivos comuns\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exeH:\Arquivos de programas\Bonjour\mDNSResponder.exeH:\Arquivos de programas\Nero\Nero 7\InCD\InCDsrv.exeH:\Arquivos de programas\Java\jre6\bin\jqs.exeH:\WINDOWS\system32\nvsvc32.exeH:\WINDOWS\system32\svchost.exeH:\WINDOWS\Explorer.EXEH:\WINDOWS\system32\RUNDLL32.EXEH:\Arquivos de programas\VIA\VIAudioi\HDADeck\HDeck.exeH:\Arquivos de programas\iTunes\iTunesHelper.exeH:\Arquivos de progra... Read more

A:Internet Explorer Pages are opening by themselves, also, one time, a song played by it self, and i couldnt find the source.

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explanation about the tool. No inp... Read more

2 more replies
Answer Match 50.4%

Hello all, I will try to explain my problem as clear as I can. I am not super tech savvy, so I need your help.

I found a thread that seemed to have the same problem but it did not fix mine.

Before I upgraded from Windows 8.1 to 10, everything worked fine. Now it has been around 2 weeks since the upgrade and I am running into a problem. My user on the PC seems to be working fine, but when the other person trys to log into her account on the PC things go weird.

First it was signing her in with a temporary account, this was solved by logging her in later.

Now it just takes a much longer time to load things when we start up our accounts. Sometimes the PC was freezing and we were not able to do anything, unless we restart the PC.

Today I ran sfc /scannow. "Windows Resource Protection found corrupt files but was unable to fix some of them.

Then I ran Dism /Online /Cleanup-Image /ScanHealth, "The component store is repairable, The operation completed sucsesfully"

Then I ran Dism /Online /Cleanup-Image /RestoreHealth, "Error: 0x800f081f The source files could not be found."

Now I dont know what to do, the other thread advised doing some other Dism but stating a source file. But I dont know how to do that, or anything with ISO files and all of that.

If someone could advise me what to do, or try to help, I would appreciate it.

More replies
Answer Match 50.4%

Privacy Protected German Search Engine
Now Free Software;
SOURCE: (ARTICLE DATE: 23rd Aug 2016)

MetaGer, Germany's most popular meta search engine for the internet, has made its source code public, allowing its user community not only to verify its data protection and security features but also to contribute to MetaGer's future developments...

MetaGer's source code has been placed in its entirety in a public repository located at..
open-source / MetaGer · GitLab. The only elements missing from the code are authentication details relating to MetaGer's meta-crawled sources search engines as these are subject to non-disclosure agreements.

"MetaGer is all about protecting the privacy of its users. By offering open-source access to its source code, the online community can now verify for itself that MetaGer does not store any data about its users", says MetaGer director Dr. Wolfgang Sander-Beuermann.

Offered in the German ( and English language (, MetaGer treats searches submitted by its users as anonymous from an early stage; IP addresses are neither recorded nor stored, and information is not passed on to other search engines...

[To read the full article please visit the link at the top of the page]​

More replies
Answer Match 50.4%

Perhaps this will help to explain what I am trying to do using a macro button on a main form to filter data in my subform.
VBA Macro process for first button:
In my subform I have a [DueDate] field.

I need to be able to filter between a date range within the [CompletionDate] field in my subform.

The user should click on the button on my main form.

A pop-up window will appear requesting the user to enter the begining [CompletionDate] value desired and the last [CompletionDate] value desired.

The results will filter all records between these two dates in the subform.
VBA Macro process for second button:
In my subform I have a [DueDate] field and want to find processes that are late.
I need to filter records where the [DueDate] < Date() AND [CompletionDate] = NULL


I also need to filter records where the [CompletionDate] > [DueDate] in the same VBA macro function.

Note: If your suggested VBA code changes my SouceObject/Master/Child fields, then I also need code to change them back to their original settings for other macro buttons to function.

Any assistance would be greatly appreciated!!

More replies
Answer Match 49.98%

We are software consultants operating from Mumbai, India. We would like to compare two sets of software programs set A and Set B  developed under and C# by different set of developers. As consultants, we have been asked to find out duplicity
of codes in set A and set B by our clients. Is there any tool available from Microsoft to find out this duplicity?. Can visual studio code clone analysis tool can help in any way, or it can be used only for visual basic applications?. Kindly understand that
I do not want to find out the repetition of the codes in either set A or set B, but we want to compare the source codes of set A and Set B.
Your immediate revert would be highly appreciated.

More replies
Answer Match 49.98%


I have been using this IDE from a long time now, but recently I happened to reinstall the application and since then I see the below error window popping up.

Also attached is the screenshot from the eventviewer..

Please let me know if you need any more debug info.

Could anyone please help me resolve this issue?

Thanks for the help in advance!!
- AK

A:Source Insight editor stopped working with Exception code: 0xc0000005

I also ran the Memtest86+ tool and the results show that there are no memory errors on the system.

- AK

3 more replies
Answer Match 49.98%

April 5, Softpedia ? (International) FTP server in Taiwan leaks AMI BIOS source code, UEFI signing key.
Researchers discovered an open FTP server that holds the source code for several American Megatrends (AMI) BIOS as well as the private signing key for Unifiied Extensible Firmware Interface (UEFI) updates, information potentially very valuable in carrying out cyberespionage. Source: FTP Server in Taiwan Leaks AMI BIOS Source Code, UEFI Signing Key - Softpedia

A:FTP server in Taiwan leaks AMI BIOS source code, UEFI sign

Oh, man! I'd hate to be the one that left that server unsecured.....

2 more replies