Tech Problem Aggregator

Server DNS Issue - Error 1075

Q: Server DNS Issue - Error 1075

When I try to start the DNS server service on a windows 2000 server it won't start and gives me an error 1075 and says "The dependency service does not exist or has been marked for deletion. Any suggestions, help or advice would be gratefully appreciated.

A: Server DNS Issue - Error 1075

Take a look at this see if it helps:

http://support.microsoft.com/kb/839089

1 more replies
Answer Match 76.44%

Hey all!
I am really desperate. I've tried a few things that other people have posted here, especially Cookiegal and Lumpola but this issue persists.

I had a virus. I think I got rid of it. Avast scans and boot time scans and Super Anti Spyware and TDSS killer report all clear. However, the network shield of Avast and the Internet don't work.
Points to note:
1. In services, the DHCP and DNS cannot be started. I get the error 1075: service has been marked for deletion or one of it's dependancies are missing. (close to that)

I've checked the dependancies of both, and reinstated the ADF module in device manager after selecting the 'View Hidden' option.
 

A:DHCP Server Service -Error 1075 - not starting

2. I've tried deleting the winsock and winsock2 entries in the registry.
3. From the command prompt, SFC/scan now terminates at 82%. thrice.
4. I can see the network, both wired and wireless, I can connect, but it says I have limited connectivity.
 

3 more replies
Answer Match 73.08%

Avg found two trojans. It didn't seem like it removed them. Internet was working though. Ran malwarebytes it found nothing. Internet was still working. Started Having connectivity issues. My dhcp client service won't start. I got a 1075 error. my internet via wifi or wired. I ran the following command prompts:
net start AFD (response: the requested has already been started)
netsh int ip reset reset.log (response: resetting echo request, failed. Access is denied. Rebooting interface, ok! A reboot is required to complete this action.
netsh winsock reset catalog (response: successfully reset the winsock catalog. You must restart the computer in order to complete the reset.
SFC /SCANNOW (scan finishes and shows this response: windows resource protection found corrupt files but was unable to fix some of them. Details are included in the cbs.log windir\logs\cbs\cbs.log

What now? Please help.
 

A:Network issue dhcp client service error 1075

I'm thinking you're still infected.

----------------------------------------------------------------------

You need to start a thread in the Virus & Other Malware Removal section of this site.

Before you post though, you need to read THIS guide.
 

1 more replies
Answer Match 58.38%

Avg found two trojans. It didn't seem like it removed them. Internet was working though. Ran malwarebytes it found nothing. Internet was still working. Started Having connectivity issues. My dhcp client service won't start. I got a 1075 error. my internet via wifi or wired won't work. I ran the following command prompts:
net start AFD (response: the requested has already been started)
netsh int ip reset reset.log (response: resetting echo request, failed. Access is denied. Rebooting interface, ok! A reboot is required to complete this action.
netsh winsock reset catalog (response: successfully reset the winsock catalog. You must restart the computer in order to complete the reset.
SFC /SCANNOW (scan finishes and shows this response: windows resource protection found corrupt files but was unable to fix some of them. Details are included in the cbs.log windir\logs\cbs\cbs.log

I can't run the programs you suggested as I have no internet access. What now? Please help.
 

A:Help 1075 Error

I will try to run the items above in the other thread in safe mode and paste results. Sorry about that.
 

2 more replies
Answer Match 58.38%

My internet will not connect It Keeps saying Acquiring network address, I have tried everything even going into Services.msc to Start DHCP client and it gives me this error
Error 1075, The dependency service does not exist or has been marked for deletion

I am running Windows XP Home Edition SP3 and its Dell

A:Error 1075

First , you may have done this but ..... check if you can start the dependency service for DHCP client service.To view the dependency services registered for DHCP Client Service, try the following steps? Click on Start and them type cmd and press Enter? In the command prompt type: CMD /K SC QC DHCP - Please note the spaces -? Press Enter check if the dependency service is started.Verify that the Dependency Service / components are runningNext -To verify that the three dependency components are running. Follow the steps below:? Click Start, Run and type DEVMGMT.MSC - No spaces -? In the View menu, click Show hidden devices? Double-click Non-Plug and Play drivers section? Double-click the entry AFD, and click the Driver tab? Set the Startup type to System.? Start the service. Note down the error message if any.? Similarly start the two other drivers namely:? TCP/IP Protocol Driver? NetBios over Tcpip? Close Device Manager and restart Windows.? Now check if you can start the DHCP service.Let us know if you have done all this, and we can look for more ideas -

4 more replies
Answer Match 58.38%

I recently had to reinstal Windows XP Media Center SP3 operating system on my Dell Inspiron 9300 laptop. When trying to install Pure Networks Net Magc Pro it will not run as it says the platform service is no running. When I try to start the platform service I get the following Error 1075: The dependency service does not exist or has been marked for deletion.
Does anyone know how to correct this situation.

Thanks.

A:ERROR 1075

Why not post to the NetMagic forum. You will have more luck there then in this
General Microsoft Forum

2 more replies
Answer Match 58.38%

My computer is stuck on "Acquiring Network address". I have tried to go into the services, and turn on the DHCP Client, however I get an Error 1075: The dependency service does not exist or has been marked for deletion, and it will not start. I am running Windows XP Home Edition, SP3. I thank you in advance for the help.

A:Error 1075

Hi -See if this reset works first. Please read carefully -TCP/IP NetBIOS Helper error 1075 TCP/IP stack repair options for use with Windows XP with SP2/SP3.Start, Run, Type CMD to open a command prompt:In the command prompt window that opens, type the following commands, each followed by the Enter key:Note: Type only the text in bold for the following commands.Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalogReboot the machine. Thank You - EDITED to reset commands -

12 more replies
Answer Match 57.96%

Hello all,

I've noticed that a few people have posted concerning this topic, so I've tried to read up on as many possible solutions before posting. I'm recently recovering from a mild virus infection on my computer, and noticed that after I had run Avast! and Malwarebytes to remove the virus, my computer lost its internet functionality. Upon running ipconfig in command prompt, I noticed that the computer was not being assigned an IP address, which lead me to believe there could be an issue with DHCP.

When running services.msc, I notice that both DHCP client and TCP/IP netbios are not running, and when I try to run them, I get an error 1075, that the files are "either non-existent or marked for deletion". I noticed that someone else had posted a very similar problem, but a few of the more advanced fixes seemed specifically tailored for their issue.

Below are the fixes I've attempted thus far -

1. Checked the registry for DHCP?s dependencies (3 are listed, Afd, Tcpip, and NetBT).
2. Reset TCP/IP stack to installation defaults by typing ?netsh int ip reset reset.log? into command prompt.
3. Reset WINSOCK entries to installation defaults by typing ?netsh winsock reset catalog? into command prompt.
4. Ran ?sfc /scannow? with an XP SP3 CD.

I'm currently running Windows XP Media Center, Service Pack 3 on a Dell Inspiron E1505 laptop I had purchased in mid-2006.

A:DHCP and TCP/IP Error 1075

Welcome aboard Please download Farbar Service Scanner and run it on the computer with the issue.Make sure the following options are checked:Internet ServicesWindows FirewallSystem RestoreSecurity CenterWindows UpdatePress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.

7 more replies
Answer Match 57.96%

DHCP and TCP/IP can not be started from Services with out the following error.

Error 1075: The dependency service does not exist or has been marked for deletion.

I've checked the dependencies and all are running.

AFD is the only driver common to both DHCP and TCP/IP so I assumed it is either not running or is corrupt..yet when I try to start AFD from the CMD prompt I get...."service is already running.

I have since disabled my Lan Connection via Network Connections as it just sits there trying to acquire ip without ever timing out.

I also performed a registry scan with Registry Booster in Safe Mode. It reported:

1061 System Errors
205 User Errors, and
1 Third Party Error

A cursory review of the log tells me the majority have to do with poorly uninstalled programs. I did NOT let Registry Booster fix anything.

As per Forum Rules my HiJackThis log and others follow:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 7:57:39 PM, on 11/26/2011
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16791)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\PROGRA~1\AVG\AVG10\avgchsvx.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Pure Networks\Network Magic\nmapp.exe
C:\Program Files\QuickTime\QTTask.exe
C:\Program Files\AVG\A... Read more

A:Error 1075 Can not Acquire Ip

16 more replies
Answer Match 57.96%

I am having the same issues as the other thread that is currently going on regarding a virus that seems to have left me unable to connect to the internet , i have done the hijack this report and will post results . please help!!
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 9:17:51 PM, on 12/20/2011
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Adobe\Adobe Version Cue CS2\ControlPanel\VersionCueCS2Tray.exe
C:\Program Files\LeapFrog\LeapFrog Connect\Monitor.exe
C:\Program Files\Common Files\Java\Java Update\jusched.exe
C:\WINDOWS\system32\spool\drivers\w32x86\3\hpztsb10.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files\Hewlett-Packard\Digital Imaging\bin\hpotdd01.exe
C:\Program Files\NETGEAR\WG111T\wlan111t.exe
C:\WINDOWS\system32\netdde.exe
C:\Program Files\SUPERAntiSpyware\SASCORE.EXE
C:\WINDOWS\system32\CTsvcCDA.EXE
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\LeapFrog\LeapFrog Connect\CommandService.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\Ms... Read more

A:Error 1075 no internet

help
 

1 more replies
Answer Match 57.96%

Hello All,

I've tried most of today to get rid of a nasty trojan. System-Check!

I'm almost there - or so I thought. Visually my laptop seems to looking okay, except, I can't seem to restart my Firewall within McAfee?

Here's a DDS:
**** EDITED ****

DDS removed - as I managed to solve issue by uninstalling MCafee and reinstlling.
Mods - please remove post or close. thanks

A:McAfee 1075 Error

Mods - please close post or remove.

thank you.

2 more replies
Answer Match 57.96%

Hello,

I'm recently recovering from a mild virus infection on my computer, and noticed that after I had run Avast! and Malwarebytes to remove the virus, my computer lost its internet functionality. Upon running ipconfig in command prompt, I noticed that the computer was not being assigned an IP address, which lead me to believe there could be an issue with DHCP.

When running services.msc, I notice that both DHCP client and TCP/IP netbios are not running, and when I try to run them, I get an error 1075, that the files are "either non-existent or marked for deletion". I noticed that someone else had posted a very similar problem, but a few of the fixes were not available for viewing/download as they were specifically tailored for that issue.

I'm currently running Windows XP Media Center, Service Pack 3 on a Dell Inspiron E1505 laptop I had purchased in mid-2006.
 

A:DHCP and TCP/IP Error 1075

Below is a copy of the Hijack This log.

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 9:03:31 PM, on 12/26/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Alwil Software\Avast5\AvastSvc.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\ehome\ehtray.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\ATI Technologies\ATI.ACE\cli.exe
C:\Program Files\SigmaTel\C-Major Audio\WDM\stsystra.exe
C:\Program Files\Microsoft Office\Office12\GrooveMonitor.exe
C:\Program Files\VERIZONDM\bin\sprtcmd.exe
C:\Program Files\Adobe\Reader 9.0\Reader\Reader_sl.exe
C:\Program Files\Alwil Software\Avast5\avastUI.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\LogMeIn Hamachi\hamachi-2.exe
C:\Program Files\Java\jre6\bin\jqs.exe
c:\PROGRA~1\mcafee\SITEAD~1\mcsacore.exe
C:\Program Files\VERIZONDM\bin\sprtsvc.exe
C:\Program Files\VERIZONDM\bin\tgsrvc.exe
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\system32\SearchIndexer.exe
C:\WINDOWS\system32\wuauclt.exe
C:\Documents and Settings\Shivang\Desktop\HijackThis.exe
C:\WI... Read more

2 more replies
Answer Match 57.96%

When I try to connect my printer lexmark 4200 series I get the message no print spooler available error 1075 Please HELP!!!

A:[SOLVED] Error 1075

I would make sure the print spooler service is enabled.

Go to Start > Run... and type services.msc to open the service snap-in. Then Scroll down to Print Spooler. Right click on it and click Start. Then right click on it, select Properties, and set the startup type to Automatic.

9 more replies
Answer Match 57.96%

DHCP error 1075--can not start the DHCP client on local computer.Dependency service does not exist or has been marked for deletion..

Hi thanks for any help you can give.
Machine is a Dell dimension e520
Win XP Media center edition SP 2

I have the original dell discs and access to a working laptop also running win XP [this one]

During a routine virus scan by avira anti vir it quarentined c:\windowes\system32\drivers\netby.sys.

This disabled the DHCP client so no IP traffic
I restored the file but still no luck

After trying to renew the IP and some searching around I found that the HKEY local machine system currentcontrolset services NETbt registry key is missing

In services DHCP cannot be restarted --gives the warning above.
AFD and TCP/IP are in device manager -non plug & play show hidden devices NETbt is not

Can the registry be repaired from the original discs without having to reinstall everything else?
Or is it as easy as inserting the missing registry key?

Thanks Bob

A:DHCP error 1075

Hi see if this can help How to fix: Error 1075, The dependency service does not exist or has been marked for deletion | Kaliphonia.com

1 more replies
Answer Match 57.96%

My windows fire wall wont start Ive tried starting it in services and the action center but no luck, i know their might be a hardware change or virus or malware that has done this but im unable to pin point it the date of any change because Ive only just realized that the firewall was off because i wanted to block a game from accessing the Internet. Ive scanned countless times but it says its clean.  Also windows update wont install updates and system recovery doesn't work...Ive been trying to follow instructions that have been given to other people but with no luck, any help will be appreciated.
 
my PC: 

OptiPlex 760 (Late 2008)

Service Tag: 5M0YJ4J | Express Service Code: 12215778643
32 bit operating system win 7 home premium 
 

 
many thanks

A:!!firewall error 1075!!

Please download and install Speccy to provide us with information about your computer.  When  FileHippo opens, click on Download latest version in the upper right pane. When Speccy opens you will see a screen similar to the one below.  Click on File which is outlined in red in the screen above, and then click on Publish Snapshot. The following screen will appear, click on Yes.  The following screen will appear, click on Copy to Clipboard.  In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.  Please download MiniToolBox, save it to your desktop and run it. Checkmark the following checkbox: List Installed Programs Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post. Try the following.  Click on the Start orb, then type Services in the Search programs and files box. Services will appear above the search box under Programs, right click on Services and choose Run as administrator. When Services opens scroll down to until you find Windows Firewall, double click on it. Click the Startup type box and make sure it is set to Automatic, if it isn't click on Automatic. Look in the Service status to see if it is running, if it isn't click on Start, then click on Apply, then OK. Scroll down to Base Filtering Engine and doulbe click on it.... Read more

11 more replies
Answer Match 57.96%

The full message is error 1075: The dependancy service either does not exist or has been marked for deletion

This started with a tidserv!inf infection. Norton End-Point seems to have deleted all related virus infections, however, I am now unable to start the DHCP service. I have to set a static IP in order to connect to the internet.

I believe tdx.dll was identified as a virus and deleted. it was listed as a dependancy of dhcp but had no descriptor. Currently it is not listed as a dependancy.

I cannot view network shares from this PC nor can I view shares that I host here on other PC's. Only this computer shows up in net places.

I did an sfc /scannow and it told me audiodev.dll and mofd.dll were corrupted and the files in the store have been corrupted.

I had to take ownership with the admin group in order to replace them with extracted copies from my windows cd, but I when I went back to reassign trustedinstaller as the owner it was not listed as an option.

my cd is without service pack and my installed service pack is sp2.

can anyone be of assistance.

A:DHCP error 1075

My dhcp was working for a day but its back down again. i dont know how to recreate the dependancy on tdx

2 more replies
Answer Match 57.12%

My computer is forever stuck on "Acquiring Network address". I have tried to go into the services, and turn on the DHCP Client, however I get an Error 1075: The dependency service does not exist or has been marked for deletion, and it will not start. Hopefully someone can help out. (Note: This is not the affected computer, the logs are from it, however) I am running Windows XP Home Edition, SP3. I thank you in advance for the help.

A:Cannot connect to internet - Error 1075

Hi -As long as you can understand the 'reasonably basic' directions, there is a solution here -http://www.google.com.au/url?sa=t&rct=j&q=error%201075&source=web&cd=1&ved=0CDsQFjAA&url=http%3A%2F%2Fkaliphonia.com%2Fcontent%2Fwindows%2Fhow-to-fix-error-1075-the-dependency-service-does-not-exist-or-has-been-marked-for-d&ei=jwvpTrX9K4fBiQfsoqHSCA&usg=AFQjCNGUfPzx_GkR2922eUot0LA67VjvMAThank You -

25 more replies
Answer Match 57.12%

My computer is forever stuck on "Acquiring Network address". I have tried to go into the services, and turn on the DHCP Client, however I get an Error 1075: The dependency service does not exist or has been marked for deletion, and it will not start. Attached is the logs you wished. Hopefully someone can help out. (Note: This is not the affected computer, the logs are from it, however) I am running Windows XP Home Edition, SP3. I thank you in advance for the help.

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 8:29:14 AM, on 12/13/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Symantec Shared\PIF\{B8E1DD85-8582-4c61-B58F-2F227FCA9A08}\PIFSvc.exe
C:\Program Files\McAfee\SiteAdvisor\McSACore.exe
C:\Program Files\Common Files\Motive\McciCMService.exe
C:\Program Files\Common Files\McAfee\McSvcHost\McSvHost.exe
C:\WINDOWS\system32\mfevtps.exe
C:\WINDOWS\system32\HPZipm12.exe
C:\Program Files\Analog Devices\SoundMAX\SMAgent.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Yahoo!\SoftwareUpdate\YahooAUService.exe
C... Read more

A:Cannot connect to internet - Error 1075

Thanks for the quick response guys, You're a lifesaver. I shall be sure to recommend that all my friends come to http://www.bleepingcomputer.com for all their troubles too!
 

1 more replies
Answer Match 57.12%

DHCP Client will not start from services menu and neither will TCP/IP all other networking services appear to be started and working.

DHCP dependencies are:

AFD Networking Support Environment
TCP/IP Protocol
IPSEC driver
TCP/IP dependencies are:
AFD

Since the TCP/IP's only dependency is AFD I suspect it has been deleted or corrupted. How do I go about fixing that?

Paste SYSINFO.txt

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 2, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz, x86 Family 15 Model 3 Stepping 4
Processor Count: 1
RAM: 1023 Mb
Graphics Card: NVIDIA Quadro NVS 280 SD, 64 Mb
Hard Drives: C: Total - 38099 MB, Free - 8667 MB; E: Total - 29313 MB, Free - 16148 MB; X: Total - 95393 MB, Free - 69980 MB;
Motherboard: Dell Computer Corp., 0W2563
Antivirus: AVG Anti-Virus Free Edition 2011, Updated: Yes, On-Demand Scanner: Enabled
I already reset the ip stack with the following to no avail.

Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log

Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog

Reboot the machine.

I'd really like to avoid the nuclear option. Any assistance is greatly appreciated.

Thanks
 

A:Solved: Error 1075 Can not Acquire Ip

8 more replies
Answer Match 57.12%

Need help solving Error #1075 problem in conjunction with CheckPoint VPN NGX R60 HFA3. I am using a Dell E6510 laptop computer running Windows 7 Ultimate 32-bit OS. I can get this VPN to run and connect when I use Microsoft's XP virtual machine sitting on the Windows 7 desktop but I cannot get it to run on the Windows 7 desktop by itself.

Although the VPN seems to load without incident the associated icon "key" does not appear in the notification tray at the lower right. It does appear in the XP virtual machine and on a separate HP desk top running Vista.

When I type services.msc at the Win 7 command prompt I get a list of all the loaded services including the CheckPoint VPN. It is at this point when I try to start the VPN I get the 1075 error. When I check the dependencies under the VPN I find the "CheckPoint Office Mode Module" and the "VPN-1 Module".

How do I determine if these dependencies are causing the 1075 error message? What steps do I need to take to resolve the error message so the VPN will start?

A:CheckPoint VPN Causing Error #1075

make sure your Firewall is allowing the following:
SR_SDS.EXE
SR_GUI.EXE
SR_WATCHDOG.EXE
SR_SERVICE.EXE


If you're running 3rd party software FW, disable or uninstall it.

1 more replies
Answer Match 57.12%

Greetings,
I am having a major DHCP error on my girlfriend's laptop. I am primarily a Linux user so I'm kinda lost here as her machine is running XP. It's a Dell XPS M1210 which, conveniently, did not come with a recovery CD or even partition.
Anyway, a few weeks ago her wireless network device stopped working. It would look like it was connecting, but it would hang on "Acquiring network address." At first I thought maybe the device was shot, until I had the chance to test out the wired ethernet, which has the same problem.
After quite a bit of googling, I ran services.msc, and saw that DHCP is not running. When I try to start it from that menu, however, I get this message: "Could not start the DHCP Client service on Local computer. Error 1075: The dependency service does not exist or has been marked for deletion."
After more googling, I discovered that DHCP has only 3 dependencies: TCP/IP, AFD, and NetBt. I checked the registry, and those were the only ones listed.
After even more googling, I ran devmgmt.msc and selected "show hidden devices" and double clicked on "non plug and play devices." I TCP/IP and AFD are both there. NetBt, however, is not.
I've spent hours doing further googling and tried pretty much every fix I could find and nothing seems to work. If the PC had shipped with a recovery CD I imagine this would be easy to fix but alas no luck. I need to get this working so I can set up my new internets and I... Read more

A:Solved: DHCP Error 1075

15 more replies
Answer Match 57.12%

Help me please, I have the same problem, and here is the SystemLook result:

SystemLook 30.07.11 by jpshortstuff
Log created at 09:34 on 18/12/2011 by USER
Administrator - Elevation successful

========== filefind ==========

Searching for "afd.sys"
C:\Windows\System32\drivers\afd.sys --a---- 338944 bytes [12:25 16/12/2011] [12:21 16/12/2011] 9EBBBA55060F786F0FCAA3893BFA2806
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7600.16385_none_d7be98b5bfc0b4c1\afd.sys --a---- 338944 bytes [23:12 13/07/2009] [23:12 13/07/2009] DDC040FDB01EF1712A6B13E52AFB104C
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7600.16802_none_d81220b5bf827af7\afd.sys --a---- 338944 bytes [10:52 17/06/2011] [02:35 25/04/2011] 0DB7A48388D54D154EBEC120461A0FCD
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7600.20951_none_d864ad9ad8c98d1f\afd.sys --a---- 338944 bytes [10:52 17/06/2011] [02:27 25/04/2011] C114AB7A1550D42EA1700FFD4179CF5A
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7601.17514_none_d9efac7dbcaf385b\afd.sys --a---- 338944 bytes [02:30 09/07/2011] [08:40 20/11/2010] 1151FD4FB0216CFED887BFDE29EBD516
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7601.17603_none_d9f97e05bca8003a\afd.sys --a---- 338944 bytes [12:25 16/12/2011] [12:21 16... Read more

A:Cannot connect to internet - Error 1075

Can I see you FSS log again?

http://download.bleepingcomputer.com/farbar/FSS.exe

and run it on the computer with the issue.

* Press "Scan".
* It will create a log (FSS.txt) in the same directory the tool is run.
* Please copy and paste the log to your reply.

1 more replies
Answer Match 57.12%

I have read through the original thread (now closed) and tried all it's suggestions. However, I am still having the same IP (on lack of) issues. I ended my efforts with the running of SFC /SCANNOW which took a considerable amount of time, but resulted in no errors of any kind.

I continue to get the Error 1075: the dependency service does not exist or has been marked for deletion, message when trying to start the DHCP Client.

I'm afraid searching the suggested logs for the dependency items it a little over my head.

A little background for my situation. The computer in question is my teenage daughters. A week ago she started having problems with the internet and I'm assuming this is some sort of virus. Whenever selecting a website to launch to, something intervenes and chooses some alternate website. Never the same one twice. I loaded AVAST free version and did a scan. I also updated Malware Bytes and did another scan. I then loaded Kaspersky TDDS killer and did a scan with that. After all that, and roughly 15 files quarantined and deleted, I now have this IP problem. I cannot restore the computer back to an earlier time.

Help would be greatly appreciated!
 

A:DHCP Error 1075 Cont.

16 more replies
Answer Match 56.7%

My PC is three years old and has been a great machine. I run Windows XP Home Edition, I.E. 7 and have all the protection installed I can find.

Quite by accident I discovered my System Restore is not working. I don't need it at the moment (!!!) but I like everything to be as near as perfect as possible on my PC so I have been trying to discover what the SR problem is and how I can resolve it.

I keep getting the message "S R is not able to protect your computer. Please restart and run SR again"............This advice does not work. for me!
I cannot turn off SR for the same reason.

I then checked out this section of the forum and discovered that many people have had this same problem. I have tried downloading Kelly's file 238 (I think that was the number) ; I have tried accessing services.msc ; I have tried accessing i386: nothing!

I did get the message "Error 1075: "Dependency service does not exist or has been marked for deletion". This error seeems to apply to many facilities on a PC.

I have my windows XP disk but cannot lay my hands on the SP2 one so I don't want to mess about without your professional advice to do so!! (apologies!)

As I said, if you solve my problem you will be miracle workers and worthy of your wings.

My thanks for any help you can offer me.

A:System Restore Won't Work : Error 1075

Right click My Computer > Manage > Expand Event Viewer > Look under Application and/or System to see if there is any event reporting on about System Restore.

Please do let us know if there is, a screenshot would be a great help.

Another workaround would be searching for sr.inf, right click it and select "Install". You might need Window XP install disc.

61 more replies
Answer Match 55.86%

This is my sister's netbook. The problems started with one of those new "fake antivirus" that puts up a ton of obviously fake results that claim your computer is highly infected*. She being... less technologically inclined apparently decided to run the "Antivirus scan" over and over again over night and then the next day gave it to me to try to figure out what was wrong. I can't find the links right now but I found a bunch of blogs that mentioned (Privacyprotection.exe) and among the most frustrating aspects what that it blocked pretty much everything from running. I did a bit of digging and eventually found out it was a rootkit causing the issues and the tools they gave me wouldn't run but I was able to follow the manual instructions. (remove the .exe, remove the alias, regedit and remove the key that matched privacyprotection.exe but not the other ones like the one underchrome etc).That took care of the major problem and I was able to get Microsoft Security Essentials running but everyscan kept turning up a few "Trojans" and that upon trying to clean would result in an error. The error would lead to 'restart to finish removel'. I tried safe mode and the same result. One top of that google results kept getting redirected (forget the site right now.. something like awesomesearch.com or what have you). I decided to try from another angle the redirect angle and found thishttp://www.bleepingcomputer.com/forums/topic422038.htmlI t... Read more

More replies
Answer Match 55.86%

My computer (vista) was infected with a virus. So I first used rkill/iexplore then ran Malwarebytes Anti-Malware since my protection (Panda) doesn't seem to do its job correctly. The first time I did this, everything seemed to return to normal. Couple of days later, the same virus started up. I redid what I did...and it seemed to work again...until I tried using the internet. (I think Malwarebytes deleted something in the registry?)

There was an error saying that "DHCP error 1075: The dependancy service either does not exist or has been marked for deletion". I googled this on my laptop and followed some of the instructions found online. None of it worked...

I went into device manager->hiddle files->non plug and play drivers:
There was a problem with these with the same code for them: This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)
App Filter Plugin
NetMon Filter Plugin
Panda Net Driver [TDI Layer]
VSCore mferkdk

Finally, I have included the last three logs from Malwarebytes showing which files were deleted by the program.

Thank you for looking over this!!

A:DHCP error 1075- Internet Doesn't Work

There is a dedicated forum for virus/malware issues regardless of your Windows version.
It's here: Virus/Trojan/Spyware Help - Tech Support Forum

(We aren't permitted to give virus removal help on the Windows forums)

2 more replies
Answer Match 55.86%

Hey Everyone.

Maybe someone could be of help. I have gone through several different forums and have attempted several ways to try to fix this but have had no luck.

I have tried the netsch winsock reset
I have tried the ipconfig /renew
My DNS service starts but my dchp client doesnt want to and gives me the error 1075.
I have removed NAV still nothing.

I have also tried many other alternatives but im just not remembering at the moment and I am just stumped.

Internet works on my other two computers, but my laptop is what seems to not want to connect wirelessly or routed. Something seems to be blocked or missing.

If anyone can please help me in any way possible it would greatly be appreciated. If you need me to provide some more details please let me know.

Thanks
Lewis B.
 

A:Error 1075/No Internet after Norton Anti Virus

16 more replies
Answer Match 55.44%

This is really bad.. I cant copy and paste to backup files for reformat and this sony laptop is telling me that the recovery will delete all files, so no option to do a windows repair. I might need to buy a 2.5 to 3.5 adaptor for this mess im in, if you cant help.. I did many things so far nothing worked..

I had a virus that would not allow me to get any icons, this was fixed after i ran avg in safe mode.

When i got back into the machine I received many pop ups one after another, ad-aware was run and after I cannot start any services, I have everything set to start in msconfig i have admin I cant change users, i cant do windows search, cant see any networks in network places nothing i cant even copy and paste the paste option is Grey when i try to copy then paste...

Every service I try to start i get error 1075 dependency service does not exist for all services.

also the Extended services tab give me nothing not list of any services only the standard tab.. I can click start and i get the error.

also Ad-aware gives me an error too when it tries to start system error 1810 has occurred service is not online.

Maybe i need to do a system restore i hope i don't lose all the pictures etc.. I cant copy and paste and its a laptop so i would need an adapter to put it on a desktop.. i think i will be OK with a system restore.
 

More replies
Answer Match 55.44%

Hello,

On July 12th 2012, my computer installed updates. After rebooting and waiting for me on the login screen, I gave it a hard shutdown to check on the BIOS settings (for a little side project, in the end I did not save any changes). After booting and logging in again, I find that many services are not running. I ran a very thorough check for malware and viruses (took over 24 hours to complete), and still no solutions. I have uninstalled/reinstalled my Broadcom 802.11g Wireless Driver several times.
I now look in the Event Viewer and find that the DHCP Client service is not running! It is set to automatic start in Services.msc, but when I try to manually start it, it gives me error 1075 (some dependencies do not exist or are marked for deletion). Running ipconfig, I notice that my system is using an APIPA-formatted address (169.254.x.x), indicating that the computer couldn't find a DHCP server.

My Event Viewer is peppered with:
------------------------------------------------------------------------------------------------
Event 7003, Service Control Manager

The DHCP Client service depends the following service: Afd. This service might not be installed.
------------------------------------------------------------------------------------------------
Event 7001, Service Control Manager

The WinHTTP Web Proxy Auto-Discovery Service service depends on the DHCP CLient service which failed to start because of the following error: The dependcy service does not ex... Read more

A:DHCP Client Service FAILS TO START! (Error 1075)

It sure sounds like your computer is having its share of issues. Did you get the services started that you mentioned in your other thread?

7 more replies
Answer Match 55.44%

I have a similar problem.... turn on print spooler, then go to add a printer and it says the print spooler is not running. round and round I go.

More replies
Answer Match 55.44%

i have been fighting with this problem for ages.
my sound does not work, i dont know why, as far as i know, nothing was added before this started, everything was working, i got up the next day and there was no audio, it no longer registers my disc drive as being there, and i cant play an videos from youtube (other sites fine, though still no audio)
laptop tells me, theres no audio installed, but all drivers state everything present. tried on here before but with no luck

heres a run down from my last post:

i have no audio. if i click troubleshoot problems it says the audio service is not running
it says the windows audio and endpoint builder arent working
if i go into services, windows audio is set to automatic but its not on, when i click start it says "error:1075 the dependency service does not exist or has been marked for deletion"

medion akoya e6214 notebook
windows 7 64 bit sp1 home premium edition
intel core i3cpu [email protected]
4gb memory
2 ram i think
also, i have no system restore points, the windows repair disc doesnt work and i have no windows 7 install disc and cant burn one as my disc drive wont register

i have installed drivers for medion akoya as instructed but it did nothing

windows audio still states its not working, when i go to services, its set to automatic but wont stay on and i get the above error message!

im at my wits end, i cant back up anything so i dont lose it, cant restore, or repair, sfc scannow says i cant do it unless im admi... Read more

A:windows audio: error 1075 the dependency service does not exist or has

From your description there are many more problems than just the windows audio error.

I would suspect an Operating System problem. If you can find a friend to download the Windows 7 Home Premium ISO and burn it to a DVD, that would give you the needed disc to try and repair Windows. Although your DVD drive does not work in Windows, it should work for booting.

Here is the link to the forum post. There are links to the various versions. You can download the same version that you have.
Official Windows 7 SP1 ISO Image Downloads | Windows 7 Forums

4 more replies
Answer Match 55.44%

I had a virus that would not allow me to get any icons, this was fixed after i ran avg in safe mode.

When i got back into the machine I received many pop ups one after another, ad-aware was run and after I cannot start any services, I have everything set to start in msconfig i have admin I cant change users, i cant do windows search, cant see any networks in network places nothing i cant even copy and paste the paste option is Grey when i try to copy then paste...

Every service I try to start i get error 1075 dependency service does not exist for all services.

also the Extended services tab give me nothing not list of any services only the standard tab.. I can click start and i get the error.

also Ad-aware gives me an error too when it tries to start system error 1810 has occurred service is not online.

Maybe i need to do a system restore i hope i don't lose all the pictures etc.. I cant copy and paste and its a laptop so i would need an adapter to put it on a desktop.. i think i will be OK with a system restore.

More replies
Answer Match 54.6%

Hi when i try to run my windows XP sp2 windows firewall to stop it from disabling my connections. i get the message "Windows firewall cannot be displayed because the associated service is not running. Do you want to start the Windows firewall/internet connection Sharing (ICS) service?" i click yes then i get "Windows cannot start the Windows firewall/internet connection sharing (ICS) service.". i then went start>run>services.msc and found that when i try to manually run the Windows firewall/ICS i get this message "Could not start the WF/ICS service on Local Computer. Error 1075 the dependancy service either does not exist or has been marked for deletion." Please help me. I just want to be able to open my ports and host Warcraft 3 games.
 

A:Windows Firewall/Internet Connection Service cannot start...error 1075.

6 more replies
Answer Match 54.6%

Apparently something called print spooling is not working on my computer. I get error message 1075: the dependency service does not exist or has been marked for deletion. I believe this is why the installation won't go all the way to the end. The computer recognizes the printer but won't go ahead and finish installing it. Anybody got any suggestions?

A:Printer installation won't complete. Error 1075: the dependency service does not exis

Are you using Windows ME or Windows XP?

14 more replies
Answer Match 54.6%

Not sure why this problem is persisting. I appear to have all the dependent files. I have run SFC/ scannow to no avail. I cannot start the services in question. The 1075 error message continues. I have attached my system info.
 

A:Solved: DHCP client and TCPIP Netbios helper 1075 error

I was able to restart DHCP services by deleting the registry entry and rebooting. I went into the registry editor, located the DHCP subkey, right click on dependonservice and clicked on delete.
However TCPIP Netbios helper I could still not start, even after running sfc/scannow.
The solution for me was to restore the operating system to an earlier point in time. In windows xp, go to programs> accessories>disk utilities> system restore and follow the directions. I suppose I could have done that for both problems? At least I didnít have to reinstall XP!

Anyway I can connect to internet now
 

1 more replies
Answer Match 54.6%

Red Shield - IE Enhanced Security Configuration for Administrators
Amber Shield - IE Enhanced Security Configuration for Non-Administrators
Green Shield - IE Zones
When I click on the how to correct this it takes me to a Windows 2003 page not 2012 for the first issue

And page does not exist for the second issue ?
Any ideas ?

More replies
Answer Match 54.18%

After a Trojan attack, I used Kaspersky Virus Remover to remove them. It seems to have been successful, but now I can't access the internet.

Below are clues to resolving the problem. I just don't know what to do next.

Can you help? I'm using XP sp3.

=================

The following files are present in /Windows/System32/Drivers folder...
* afd.sys
* tcpip.sys
* netbt.sys (It was missing; so I copied to here from ServicePackFiles/i386)

=================

CMD /K SC QC DHCP reported this...

[SC] GetServiceConfig SUCCESS

SERVICE_NAME: dhcp
TYPE : 20 WIN32_SHARE_PROCESS
START_TYPE : 2 AUTO_START
ERROR_CONTROL : 1 NORMAL
BINARY_PATH_NAME : C:WINDOWS\system32\svchost.exe -k netsvcs
LOAD_ORDER_GROUP : TDI
TAG : 0
DISPLAY_NAME : DHCP Client
DEPENDENCIES : Tcpip
: Afd
: NetBT
SERVICE_START_NAME : LocalSystem

=================

In Device Manager,
* AFD Networking Support Environment is running successfully
* TCP/IP Protocol Driver is running successfully
* NetBios over Tcpip - DOES NOT EXIST

=================

In services when attempting to Start these services

* DHCP Client Properties (Local Computer) and
* TCP/IP NetBIOS Helper

I got these errors...

* Could not start the DHCP Client service on Local Computer
* Could not start the TCP/IP NetBIOS Helper service on Local Computer
* Error 1075: The dependency service does not exist or has been marked for deletion.
* Under the dependencies tab: No Dependencies in either box.

=================

Start, Run, SF... Read more

A:Cannot Access Internet after Virus Removal - Netbt.sys, NetBios missing - Error 1075

16 more replies
Answer Match 54.18%

Can someone please help, I can't connect to the internet whenever I connect it just connects local only and says the dhcp client isn't working on this computer when I go into services to manual start it says windows could not start the dhcp client on local computer error 1075 the dependency service does not exist or has been marked for deletion it happens on anyones internet I cant connect to wired and wireless, any help will be really appreciated as I have been trying to fix this for weeks now

A:windows could not start the dhcp client on local computer error 1075 the dependency s

Hello, lets do some cleaning up and see if that helps you out .
How to Flush DNS in Windows Using the Command Prompt

Step 1 ? Close all open web browsers and applications on your computer.

Step 2 ? Open the Windows command prompt by selecting the ?Start? menu and then go all programs, accessories, then right click command and run as admin.

Step 3 ? At the command prompt, enter ?ipconfig /flushdns? followed by pressing the ?enter? key. After a moment, Windows will display a message similar to: ?Successfully flushed the DNS Resolver Cache.? Once the message is displayed, the DNS will be flushed removing all incorrect entries.

Then , we want to get the IP reset, so, lets renew its settings and see if this also helps out :
you will type in the command box : ipconfig /release then enter, then next ipconfig /renew then enter, this will reset the IP , now restart and attempt to have it reconfigure its connections to your router. Post back results please.

3 more replies
Answer Match 52.08%

I have recently installed 24 new XP computers in our K-12 lower school lab. In the morning all is fine (with a restart/boot) and we are able to use all of the software that these students use in the lab. I am losing connection to the mapped drives.

The first class to use the lab has no problems. When the second class comes in (after 10 to 15 minutes idle time) they cannot connect to the software the class before them was using.

I can see the mapped drive in My Computer {G:\server\shared folder}, there is not a red X showing loss of connection. However a message will come up eventually telling me that G:\ is not accessible. If I double click on the G: drive in My Computer I will eventually get the following message: "The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you."

If I reboot all is well until we try to get back into the application after someone has finished their lesson. We even have seen a few computers freeze during the lesson while using the application.

I have two servers that has been mapped one is a Windows 2000 and the second one is Windows 4.0. The XP has been updated to XP Version 2.

Lawrence
 

More replies
Answer Match 51.24%

I use KEY Bank to access my account,, When I click Login IE brings me to the following page,

The website cannot display the page
HTTP 500
Most likely causes:
The website is under maintenance.
The website has a programming error.

What you can try:
Refresh the page.

Go back to the previous page.

More information

This error (HTTP 500 Internal Server Error) means that the website you are visiting had a server problem which prevented the webpage from displaying.

For more information about HTTP errors, see Help.

This is only a problem on my computer it works on others. I have done all the Windows Updates and also went and downloaded the newest JAVA Update..

Any Ideas
 

A:IE 7 Issue with My bank (HTTP 500 Internal Server Error)

Have you tried lowering your Security settings in IE7 Tools>>Internet Options>>Security

Also if not try Privacy
 

1 more replies
Answer Match 50.82%

I tried to run a DDS scan for log file but my computer crashes(blue screen) before it completes the process. Unable to browse internet with Mozilla and IE. Usually an error comes up after webpage times out. "DNS error occurred. Server cannot be found." I did the usual checks to make sure things were set to auto detect. Rebooted computer, unplugged the router and reset router. I am on my laptop and everything seems to be fine going through the router. The desktop is having issues. Malwarebyte ends in error halfway scanning. AVG finished scanning (in safe mode as well) without detecting anything. Superantispyware did not detect anything. I posted a hijackthis log to see if this may be helpful. The only symptom I can see now is browser unable to bring up webpages. Do I have a malware/virus? Any help is appreciated.
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 7:00:07 AM, on 4/7/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\PROGRA~1\AVG\AVG10\avgchsvx.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Tall Emu\Online Armor\O... Read more

A:"DNS error occurred. Server cannot be found." Virus/Malware Issue

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!Please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.In the upper right hand corner of the topic you will see a button called Options. If you click on this in the drop-down menu you can choose Track this topic. By doing this and then choosing Immediate E-Mail notification and then clicking on Proceed you will be advised when we respond to your topic and facilitate the cleaning of your machine.We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.In order for me to see the status of the infection I will need a new set of logs to start with.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.DeFogger: Please download DeFogger to your desktop.

Double click DeFogger to run the tool.
The ... Read more

24 more replies
Answer Match 47.46%

Hi,

I am having an issue with offline files created offline syncing back to the server. I have set up a network share to be available offline on a client computer. All files are available offline without issue. Here is the issue however. If I set the folder to work offline any file I create in the folder when it is offline just disappears when the folder comes back online, there are no conflicts or sync failures reported in sync center. If I create a new folder offline the folder does sync back to the server. Any changes made to an existing file are also replicated back to the server once the share is back online. So the issue is only with newly created files when the share is offline. I have not been able to replicate this error on any other file server in our environment, However I have recreated the issue with multiple shares with multiple Win 7 clients on this file server.

Steps taken so far.

Checked and reset permission levels on the share.
Recreated new shares from scratch for testing.
Disabled and enabled offline files on the client computer and cleared the offline cache.
Check various registry entry settings.
Disabled cashing on the File server.
Tested with XP the issue does not exist with XP.

I have spent hours researching this error online to no avail.

The clients are running Windows 7 Enterprise 64 bit
The File server is Server 2003 Standard 32 bit with SP2

Any help or ideas would be most welcome.

A:Offline Folder sync issue, Win 7 Client Server 2003 Flie Server.

I've seen the complaints about this problem but with no clear resolution. There are some hot fixes listed that may help, updating to Windows 7 SP1 is supposed to help in some cases but nothing seems for certain.

No way for me to recreate this problem but apparently others have the same problem.

Offline created files disappear after re-connect

Browse by Tags - The troubleshooters and problem solvers... - Site Home - TechNet Blogs

Administratively assigned offline files on Win7 client disappear from server (Network Steve Forum)

The Group Policy settings in the next link may have an effect on this problem.

http://mcpmag.com/articles/2003/11/0...ine-files.aspx

3 more replies
Answer Match 47.04%

The following Structure is a representation;
PC1 - IP 10.0.0.10 - FQDN PC1.DOM.LOCAL
PC2 - IP 10.0.0.20 - FQDN PC2.DOM.LOCAL
SRV1 - IP 10.0.0.5 - FQDN SRV1.DOM.LOCAL - File Share 'FLDR1' / USR1<ReadOnly>


SRV1 has a folder, FLDR1, being shared for read only access to user USR1.

PC1 and PC2 logged on as Domain User USR1.
PC1 is able to connect to SRV1 to see and look in FLDR1.
PC2 is unable to connect to SRV1 to see and look in FLDR1.
Now there are multiple means of connecting to SRV1 to see the share FLDR1.


The following connections were done in combination with the following methods;
Method 1 - via logged on Domain User CMD Prompt with 'NET VIEW'.
Method 2 - via logged on Domain Administrator CMD Prompt with 'NET VIEW'.
Method 3 - via logged on Domain User Explorer Window.
Method 4 - via logged on Domain Administrator Explorer Window.

Connection 1 - via Server Name.
Connection 2 - via Server IP Address.
Connection 3 - via Server Fully Qualified Domain Name.


Now that the stage is set, going to the fun part...

Testing from both PC1 and PC2...
-------------------------------------------
PC1 : Method 1 - Connection 1 - Success
PC1 : Method 1 - Connection 2 - Success
PC1 : Method 1 - Connection 3 - Success
PC1 : Method 2 - Connection 1 - Success
PC1 : Method 2 - Connection 2 - Success
PC1 : Method 2 - Connection 3 - Success
PC1 : Method 3 - Connection 1 - Success
PC1 : Method 3 - Connection 2 - Success
PC1 : Method 3 - Connection... Read more

More replies
Answer Match 47.04%

We run a web proxy server on our network for internet access.
On client machines (running Windows 2012 R2) I have configured the proxy server setting in Internet Explorer "Tools\Internet Settings\Connections\LAN Settings" to point at the designated web proxy server.
When attempting to browse websites from IE I receive the "The proxy server isn't responding" error.
Conversely, browsing the same sites via Google Chrome and Firefox (installed on the same client server) return web pages without error.
In addition, if I run Internet Explorer as administrator (Right Click\Run as Administrator), I am able to browse web sites without receiving the error.
It would appear that the issue is isolated to browsing via IE when not run in elevated mode.
Has anyone come across this issue?

A:Server 2012 R2 - Internet Explorer Proxy Server Issue

Hi Dicki,
First, please try to reset the Internet Explorer. Some plug-ins may affect the proxy.
If it doesn't work, please try to perform a network capture on the client.
Please check if the client send the http traffic to the proxy server at the correct port.
If the client has sent the http traffic to the proxy server, please check if there is any warning or error in the proxy server.
To download Network Monitor, please refer to the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Best Regards.Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

2 more replies
Answer Match 44.1%

As of recently, I may have edited one registry after previously messing with a registry deletion using AVP cleaner. Now my LAN internet connection won't get past Acquiring Network and also my IP/Subnet are both 0.0.0.0 and my default gateway is blank. Someone please help me please
 

A:DHCP & TCP/IP getting #1075 Errors

16 more replies
Answer Match 44.1%

I'm new to the forum but have a problem that I want make the right decision on. I play Aces High II which is a flight simulation game. It may not be as hard core as Battlefield 3 but they do keep upgrading to high res graphics. My computer is a prebuilt Dell Studio XPS 8000. Intel i7 core 860 processor @ 2.8GHz. Graphics card a Nvidia geforce GTS 240. 8 Mb memory, Windows 7 home premium os. Now that said I am experiencing stutter sometimes while i'm playing. My fps go from 60 which is where it should be to 10 or less. I,m not sure if this is the game card or a lousy connection to the game server as we do get discoed sometimes. The computer is a year and a half old and don't remember experiencing this before that much. Any advice would be greatly appreciated. I'm not against getting a new card and probably need new power supply.
 

A:GeForce GTS 240 issue or gaming server issue?

What resolution are you playing at? What is your budget for your upgrade?

Its your gpu more than likely
 

8 more replies
Answer Match 43.68%

I cant get my Outlook to work consistently. 
I keep getting this message. 

Unable to send or receive messages for the Outlook (simone.natalie) account.

Server Error: 3219
Server: 'https://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx'
Windows Live Mail Error ID: 0x8DE00005

I have uninstalled it and reinstalled it but no luck

More replies
Answer Match 43.26%

Recently purchased a new computer. I was having issues with installing Windows 7 and learned that HyperTransport is sometimes the cause of the issue and by turning it from "Auto" in the BIOS settings to "X1" can resolve the issue, and for me it did.

After installing Windows 7 and waiting to see if there were any other errors I went back to turn HyperTransport back to "Auto" I'm above computer savvy, but not far when it comes to hardware, I'm more of a software kind of guy. After doing so I was receiving consistent BSOD's. And after turning HyberTransport back to "X1" they went away narrowing it down to this being my issue.

I didn't know if updating my BIOS would help the issue so I decided to ask around first.

Computer Specs:

AMD Phenom II X6 1075T with HyperTransport
Gigabyte GA-870A-UD3
8Gig of Corsair Dominator
ATI Radeon HD 5770 1Gig

I have no idea about the power that any of these pieces should be receiving, nor if that would even be the cause of the problem. Also, windows freezes along with the BSODs saying that a video driver went out but was recovered, I just installed the latest video drivers. At the time of posting this the computer has been running for 2hours without HyperTransport set to "Auto"

Would updating the BIOS fix the problem?

Thank you!
 

More replies
Answer Match 42.84%

I have a Access 2000 database residing on one sever and an installation of SQL Server 2008 residing on another. Both servers are running Windows Server 2003. I created a linked server using the code below. When I run EXEC sp_tables_ex 'PropCont' I get the following,
"OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: The provider did not give any information about the error.].
Msg 7399, Level 16, State 1, Procedure sp_tables_ex, Line 13
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. The provider did not give any information about the error."

I tried changing the code to specify my account information, which has Administrative privileges on the domain and I get,
"OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80040e4d: Authentication failed.].
Msg 7399, Level 16, State 1, Procedure sp_tables_ex, Line 13
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. Authentication failed."

Originally I was getting an error that said, "The workgroup information file is missing or opened exclusively by another user" I found an article on line that suggested I do the following,
"1. Open SSMS
2. Expand Server Objects, Linked Servers, Providers
3. Double click the provider (Microsoft.Jet.OLEDB.4.0)
4. UNTICK the "Allow inprocess" option"
I did this and I stopped ... Read more

A:Linked Server from SQL Server 2008 to Access 2000 db gives error

7 more replies
Answer Match 42.84%

Every 5 minutes I get this error message popping up under event viewer on a Windows 2003 Small Business Server (all updates etc):

Event ID: 1054

Windows cannot obtain the domain controller name for your computer network. (An unexpected network error occurred. ). Group Policy processing aborted.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.​
I have done the MS Support site "recommendations", but the Server is pointing to itself for the DNS and the IP address and all that are fine. Not sure why or what is going on here. I can't seem to stop it.
 

A:Server 2003: (Event Viewer) error every 5 minutes RE: DNS Server

10 more replies
Answer Match 42.42%

this is my sisters hp laptop she got malware which made the internet explorer not access any networks but i deleted the maleware wid maleware bytes but still cannot connect to server its using a wireless connection to a bt home hub the connection is fine cos she can connect to ares lite (the p2p program) but not to any websites ive tryed winsock fix lpfix and iefix but all did not work ne help will be much appreciated thankx

A:internet explorer 6 cannot find server server or dns error

am i doing something wrong?

3 more replies
Answer Match 42.42%

I've run into an issue several times when trying to copy an entire share from one server to another. In this case, it happens to be from a Mac to a Windows server (just in case that's relative to the problem). The command I was using is:

robocopy \\MacDASD\Boards \\SRVRWIN78\Boards /S /FFT /XJ /R:1 /W:5 /V /TS /TEE /L

This runs fine, showing all the files and subfolders from the Mac's 'Boards' share that would have been copied. However, once the '/L' is removed to actually run the command I get 'ERROR 2 (0x00000002) Accessing Source Directory \\MacDASD\Boards. Running Robocopy for each of the subfolders under the 'Boards' share, however, works fine. It seems it just can't do the entire share at once. Any help would be appreciated.

A:Robocopying an entire share from server to server gets error 2

A quick search indicates error 2 could be:
- Some Extra files or directories were detected. Examine the output log.
- The system cannot find the file specified.

You could try to increase the retry parameter from /R:1 to a higher value.

I also found this but I don't know if it's correct or not, nor if error, exit codes and errorlevel are equal values:
Note also that bit 0x02 simply indicates that there are files at the destination that are not present at the source. This will happen if the /E switch is used and files have been deleted from the source since a previous copy was taken. It should not happen if the /MIR switch is used because that should delete files at the destination to mirror the source (but I haven't tested this).
Getting ROBOCOPY to return a "proper" exit code? - Super User

2 more replies
Answer Match 41.58%

Symptom:
The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:
start

More replies
Answer Match 39.9%

Morning everyone,

I just inherited this machine at work but it has a few startup issues that I need your help on. Upon initial startup (before completely loading the desktop) an error popup saying "Your SQL Server insdtallation is either corrupt or has been tampered with (could not open SQLEVN70.RLL). Please uninstall then re-run setup to correct this problem."

I've never done this before, could someone help with a step-by-step? I would really appreciate the help

thanks!

A:SQL Server Issue

You might have a look here.About a third of the way down the page is a "possible solution" by an "andydc3".It will start with: "I had the same problem, and I didn't have the duplicate/empty folders that the previous reply mentioned. Here's how I solved it:I went to C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\Resources\1033 and found that there resided a good...."Hope this helps,

3 more replies
Answer Match 39.9%

Below is the log.

Symptoms: No icons or Start Menu after logging into the computer. Start menu shows up and disappears after a split second. Please help if you can. I appreciate it.
Logfile of HijackThis v1.99.1
Scan saved at 9:34:50 AM, on 5/27/2005
Platform: Windows 2000 SP4 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\System32\termsrv.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\system32\spoolsv.exe
C:\WINNT\system32\msdtc.exe
C:\Program Files\Common Files\CA\Alert\ALERT.EXE
C:\Program Files\Symantec\pcAnywhere\awhost32.exe
C:\Program Files\ComputerAssociates\ARCserve\DBENG.exe
C:\Program Files\CA\SharedComponents\BrightStor\CADS\casdscsvc.exe
C:\Program Files\ComputerAssociates\ARCserve\jobeng.exe
C:\Program Files\ComputerAssociates\ARCserve\msgeng.exe
C:\Program Files\ComputerAssociates\ARCserve\caserved.exe
C:\Program Files\ComputerAssociates\ARCserve\casmrtbk.exe
C:\Program Files\ComputerAssociates\ARCserve\tapeeng.exe
C:\Program Files\ComputerAssociates\ARCserve\cadisc... Read more

A:Server Issue

Hi Coop-Show. The only thing I see in the log that is questionable is:E:\hi.exeDo you know what this is? if not then terminate the process and delete the file.If you are unsure then do the following:Go to the Jotti's malware scan page and use the buttons at the top of the page to browse to this file(s) on your hard drive to submit for a scan:E:\hi.exeSeveral scanning engines will be used to check the file for any threats. Please post the results of the scans back here.Cheers.OT

7 more replies
Answer Match 39.9%

Hey guys, having trouble getting XP to Update, well it did Update MSRT and failed on Flash as usual because I removed Flash.  The only thing I can think of that I changed was my Router settings to more aggressive, but it has not affected Windows 7?
 
This is the ms document on it: https://support.microsoft.com/en-us/kb/883820
 
I tried all the stuff they say there but none works.  I have SP3.
 
I am also being sent to this site, which don't look like it should.
http://windowsupdate.microsoft.com/
 
Thanks pcpunk

A:HTTP Error 500 - Internal Server Error, Error 0x8ddd0010

All good now!

1 more replies
Answer Match 39.48%

We have a Windows 2003 server with two nics in it. Nic one is for user access to the server (192.168.215.27), Nic two is connected to a switch that is used for tape backup purposes only (10.10.0.16). The server is running our testing software from QuestionMark and everything is working great. But they have a tool that runs from users desktop called Author Manager that allows testing administrators to edit test question, answers and scoring.
Okay here is the problem, as long as nic two is enabled the author cannot connect to the server. If disabled then no problems at all. No routing is enabled and a persistent static route has been added to tell all 192.168.215.0 traffic is to use the default gateway of 192.168.215.1 only. We have seen this before with VPN client connections because checking with a tracert showed that the last connect was to the 10.10.0.0 subnet, but adding the persistent static route would correct that problem. QM support will only say that they do not support 2 nic servers, which I find silly.
So the question is has anyone had this issue before and is there a way to fix it. And if routing is disabled why would a nic pass its traffic off to another nic. Is thier anyway to force the two nics to isolate themselves from each other.
 

A:Server 2 nics issue

7 more replies
Answer Match 39.48%

Yesterday at 3:05 PM we had a momentary power sag in the office, a couple of the office computers turned off, but after that everything seemed to be okay. Both of the users were able to restart their machines and continue working. This morning when I got to work I went to check the server which is working fine, but the tape drive seems like it has no power. when I try to eject the tape in the drive nothing happens. I also tried to format the disk by using the server software and it tells me that the "cartridge is not in place" It is connected to a UPS so I don't see why this would quit working due to a power sag. What can I do?
 

A:Server Backup Issue

11 more replies
Answer Match 39.48%

Morning. IDK if this is where I am suppose to post this. My laptop was FINE yesterday and then all of a sudden I wasn't able to connect to the internet. I rebooted it, i redid my wireless routers. Those are fine cause my phone can connect, and my husbands laptop can connect as well. Mine will not. It is asking for Proxy Authentication Proxy server 0.0.0.0:0 and then asking for username and PW, which i don't have either, its my HOME laptop. I tried the LAN setting and making sure the Proxy thing was unchecked it is... so now idk. Its not working. I read that I should uninstall IE and re install it, but I don't have internet. This is really frustrating. Can someone help?
 

A:Proxy server issue

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

1 more replies
Answer Match 39.48%

Not too sure if I should be posting a server issue but any advice is good so here is my issue. I have a 2K server and it seems to start up slow. Takes about 5 minutes. Where before t was like 2 minutes.

- WIN2K Server
- Always do Windows updates ( the important ones )
- It's an Intel P4 | 1 gig of ram | 2.4 Ghz
- Sometimes it take long to install a 2 megs update. I always run registry fixers and it works.
- Mcafee scan every Saturday
- Used HJT posted here http://forums.techguy.org/t390197.html
- Use adaware | spybot |crapcleaner | MS Anti spyware | CW Sheedder

I'm going to do more during the week but anyone have more advice they can give
 

A:Win2k Server Issue

BUMP
Anyone ?
 

2 more replies
Answer Match 39.48%

I have a webserver that i was using comcast to host, then i switched to bellsouth dsl. The problem is i can get to the server which is at dailylol.dynalias.org only locally, if i type in the ip 98.64.192.--- it will not load same with the ftp server, any ideas, i have changed the dyndns account to forward so im lost as to what may be the problem, any help would be great thanks.
 

A:Comcast to dsl server issue

If bellsouth's terms of service do not permit running a public server on your account, they may be blocking incoming connections to common server ports.

I just tried a tracert to dailylol.dynalias.org and the reverse DNS lookup for that URL came back as 192.168.1.2 which is totally wrong. The whole 192.168.x.x range of IP addresses is reserved for private IP addresses on LANs, not public IP addresses on the Internet.
 

3 more replies
Answer Match 39.48%

Can anyone help me?

We have an NT server, and currently having Major problems with people who don't know what they are doing deleting folders!!!

Is there any way of allowing users (W98) to access and save documents to the folders without them being about to delete them?
 

A:NT Server Security Issue

If the file system is NTFS, then you can set permissions to write and modify but not delete if you want. If the users are connecting through a share, you should set share permissions that way also. I would set both if able. Don't worry about w98 machines seeing a NTFS share, it uses the server to translate and looks like a FAT folder to the network users. To set share permissions, right-click on the folder and select sharing and then the permissions button set only admins and system as having full control, and everyone (or domain users) to read write and change. That is for win2k, options for NT may read modify instead of change. For folder permissions, right-click on the folder and select properties and the security tab, click permissions and set accordingly. Hope this helps.
 

1 more replies
Answer Match 39.48%

Why is it that after I login into my test server it takes five minutes on the loading your personal setting box. I have been testing DNS and kept messing and having to re-install and it would never take that long and now I got AD working it takes forever. I know the one and only fix I have experienced is to re-install. But just wondering how I would troubleshoot it. The preparing network connection takes a longer time also.
 

More replies
Answer Match 39.48%

I had a plotter setup on a DC, all users were able to plot to it using mulitiple programs. The DC has went down and a new DC took it's place. Now the users can only plot Dwg files (autoCAD) and they can't plot word or other programs. I have checked all permissions and they all seem to be fine. What else should I look for?
 

More replies
Answer Match 39.48%

I downloaded the 1.6 and 1.7 patches to my Call of Duty 4: Modern Warfare.

For the past month I have been playing CoD4 with no problems. But after I installed the patch, non of the servers on the server list show up. I click refresh, and it connects to the master server, but then nothing appears.

I know for certain that my firewall isn't blocking anything.

IS there a way to fix this so the servers come up? Or even a way to remove the patch so I can go back to the older version that actually worked?
 

A:COD4 Server Issue

Help.
 

1 more replies
Answer Match 39.48%

unable to browse to any server/workstation using UNC names after virus

removed all infected files, virusues dlls exes ect....

check the gpo and reg there is no disabled rights

sfc finished>reboot

even ran a script to edit the regitstry to clean up rights ( as per microsoft )

cd /d "%ProgramFiles%\Windows Resource Kits\Tools"
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f /grant=system=f
subinacl /subdirectories %windir%\*.* /grant=administrators=f /grant=system=f
secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose

reboot

from there checked all services, everything is running
masterbrowser, everything

however getting GPO errors

Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1030
Date: 9/3/2008
Time: 3:48:32 PM
User: *******
Computer: *********
Description:
Windows cannot query for the list of Group Policy objects. A message that describes the reason for this was previously logged by the policy engine.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1030
Date: 9/3/2008
Time: 3:46:38 PM
User:... Read more

A:issue with UNC \\server\share

To get Expert Help with malware removal:

I recommend that you read this article… ( Simply, click on the links to be re-directed.)

"Having problems with spyware and pop-ups? First steps;

IMPORTANT - Read This Before Posting For Malware Removal Help

Please follow the instructions very carefully; then, post all the requested logs and information; as instructed, in the HiJackThis Log Help Forum.

http://www.techsupportforum.com/secu...this-log-help/

Please ensure that you create a new thread in the HiJackThis Log Help Forum; not back here in this one.

IMPORTANT - Read This Before Posting For Malware Removal Help

When carrying out The 5 Steps,

If you cannot complete any of them for whatever reason, just continue on with the next one until they are all completed.

However, it is extremely important to make mention of the fact that you could not complete any of the steps in your post to HiJackThis Log Help Forum.

http://www.techsupportforum.com/secu...this-log-help/

Where an Analyst will assist you with other workarounds.

Once done, please be patient, as the Security Team Analysts are usually very busy; one of them will answer your request as soon as they can.

7 more replies
Answer Match 39.48%

I have had blackops for my computer since its release and i recently come into a serious issue regarding the server list.

When i played about 2 weeks ago i would be able to go into the server browser and see a list of servers, Under servers then it showed A number like 284(950) meaning certain servers are being blocked by my Filters

But now I have all filters set to allow everything and i get 0(2521)
Meaning no servers can be seen, I cant figure out why,

Im running a store bought windows 7, Due to the fact my Graphics card cant handle the game, I run it in the games lowered settings which i have done since i bought the game without problems I added this to help figured out if its the issue, as far as i know its irrelevant

When i was playing inside of servers i had a consistent ping Or Latency take your pick there the same depending on your game of 60-75 (90 when i first load in)

Ive done a factory Restart and completely wiped it from my computer and that did not help I checked my router settings and all Ports used by this game a currently allowed

Im stumped, Any ideas?
 

A:Black ops server Issue

Maybe there is a new patch avalible, get it with Game Spy Comrade
 

2 more replies
Answer Match 39.48%

Hey Guys,

We have a terminal server which we currently use and it seems to be bluescreening quite frequent. I know it's a issue related to the Plug and Play driver (PNP_DETECTED_FATAL_ERROR) but I haven't found any clear indication online on how to fix it.

I've attached the BSOD data. If anybody could have a look and advise would be greatly appreciated. Just stumped on how to fix the issue.

Cheers,

More replies
Answer Match 39.48%

I can successfully ping the server from an XP Pro PC by using either the IP or the DNS server name. However, from the server, I am unable to ping the same PC using the IP address. What could be wrong? Could the PCs be blocking a Ping response?

A:Ping Issue From Server

Check the firewall settings for your ICMP choices. To respond to a ping you must enable an echo of ICMP requests through the firewall.

2 more replies
Answer Match 39.48%

Having a weird DNS issue. I have my TCP/IP properties set for DHCP with DHCP disabled in the router, but alternate configuration is configured. For some reason I keep getting DNS servers assigned to me that I've never used.

It keeps setting the DNS to staticly uses these addresses

85.255.115.75
85.255.112.109

I've flushed the DNS rebooted I've checked the Advanced DNS tab in the TCP/IP Properties and it also lists those DNS Server addresses there as well, I remove them and they just keep comming back. This is happening on 1 of 2 machines on the same network. Any idea what would cause this?

XP Pro SP2

Windows IP Configuration

Host Name . . . . . . . . . . . . : antec
Primary Dns Suffix . . . . . . . : xtech.n64
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . :No
WINS Proxy Enabled. . . . . . . No
DNS Suffix Search List. . . . . . xtech.n64

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Linksys Wireless-G PCI Network Adapt
er with SpeedBooster
Physical Address. . . . . . . . . : 00-12-17-69-AF-C4
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Autoconfiguration IP Address. . . : 10.0.1.20
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.0.1.1
DNS Servers . . . . . . . . . . . : 85.255.115.75
85.255.112.109
 

A:Solved: DNS server issue

16 more replies
Answer Match 39.48%

Hello All-Emails have been sent to numerous, if not all, of the addresses in my address book belonging to [email protected] to protect from spambots. Of course, they do not appear in my "sent" folder or elsewhere. I only know of this from the responses I get from recipients. This would have been a simple problem I thought, until I was unable to discover the cause.I am running Windows XP SP3, have two computers on the network typically, and have a number of email accounts. Four email accounts are sbcglobal.net accounts, and only one has been utilized to issue spam/viruses and so forth. This is done through a hypertext link with no message attached.On these two machines Norton 360 runs at start up. Scans reveal no malware. After these messages began being sent as if from [email protected] I did the following:Ran an additional Norton comprehensive scan. Nothing was found.Ran Malawarebytes' Anti-Malware full system scan on both machines. Nothing was found.Ran IObit Security 360 on both machines. Nothing was found.All secuirty programs were updated as of today's date. Then I ran the Microsoft Malicious Software Tool, and again nothing was found on either machine.I have run HiJack This and saved the results to Notepad. I am willing to share that information if would be of use to someone on this forum. Any further advice on steps I could take would be most appreciated.Thank you in advance for your assistance.Regards,-PaulEdit: Moved topic from Am I... Read more

A:Worm or Server Issue?

Here is my Hijack This logfile for review:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 2:28:05 PM, on 2/11/2010Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v8.00 (8.00.6001.18702)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\csrss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\Program Files\IObit\IObit Security 360\IS360srv.exeC:\WINDOWS\Explorer.EXEC:\Program Files\Java\jre6\bin\jqs.exeC:\WINDOWS\system32\LxrJD31s.exeC:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exeC:\Program Files\MozyHome\mozybackup.exeC:\Program Files\Norton 360\Engine\3.8.0.41\ccSvcHst.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\nvsvc32.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\svc... Read more

3 more replies
Answer Match 39.48%

I upgraded the NT 4.0 server domain controller to a Windows 2000 server and immediately noticed that the XP client machines took a VERY long time to logon to the server. The server is running DHCP but I modify the DNS setting so that the XP clients have the IP address of the 2000 server DC as their DNS. This corrected the problem with the logon speed but it created another little problem.

When the 2000 server DC, which is designated as the DNS server, goes offline, all the XP clients are unable to access the Internet. Once the DC is online again, connectivity to the Internet is restored.

I do not know what options I have to designate the ISP DNS information so that the clients do not have to rely on the availability of the DC for Internet.

Any suggestions are greatly appreciated.

PS..we are small automobile dealership that does not have a large IT budget. I try to do the best I can but it explains some of the older technology i am using.

Greg
 

A:2000 Server DNS issue

First, your config to point the clients to the server DNS is the correct choice.

The symptoms resulting from an outage of that server are normal - -
and should lead you to the solution that the DNS & DHCP servers need to be
replicated (ie two of each).

However, you can configure the clients with two DNS addresses:

the first one (being the primary) should be your internal DNS address
and the secondary might be any public DNS server like 8.8.8.8 (which is google)
DNS processing is to issue a request to BOTH dns addresses and to accept
the results of the first one to reply.
That then creates the situation (a race condition) that if YOUR server gets bogged down, the secondary is more likely to reply first.

You should really attempt to avoid all outages of your DC and to schedule all maintenance to 'off-hour' periods to reduce the impact to the clients
 

2 more replies
Answer Match 39.48%

Linux running Fedora 14 is the NFS server and License server for my Toon Boom Animation software. Mac Pro running Mountain Lion is the client.

This set up previously worked but after a power outage the software will not open on the Mac since it cannot verify the license with the linux license server.

Network setup:

Motorola Uverse Wireless Router/Modem ---> TrendNet Switch ---> Server and Client

Manual IP addresses set for the server and client

I have to use NFS Manager on the Mac to be able to view and edit the NFS mounting, but upon starting it, I recieve an error message saying that the Mac has reverted back to Bonjour only operation and that there is a possible problem with the forward and backward name resolutions.

I think the router is handling the DNS, and I don't know how to resolve the issue... I'm not all that knowledgeable about advanced networking and have been barely getting by until now.

Both computers are talking to each other since I can access files that are on the Mac from the Linux machine via SMB. Haven't figured out how to access linux files from the Mac though.
 

More replies
Answer Match 39.48%

I went out and bought a Linksys WRT160N V2 to replace my old wired router (which I had NO problems with, btw) and started having this problem on the XP computer that was hardwired to the router. My main computer (Vista) that was using the wireless adapter had ZERO problems.

The other day, I decided to switch the location of the router and modem to be closer to my PS3, so now my main computer is hardwired while my XP computer is using the wireless adapter. Now my main computer is having this DNS problem. It literally took me about half an hour to be able to reply to this thread because all I kept getting was "Internet Explore cannot display the webpage" and a "diagnose connection" button.

I noticed the pattern to this problem was right after I fired up my computer. What boggles me, is that it's NOT an internet connection problem. I say this, because my MSN Messenger will sometimes connect right off the bat, being able to chat with friends and whatnot, but when I try to check my email or go to any other page for that matter, "Internet Explorer cannot display the webpage." And if it's not not being able to display the webpage, I get a Google page saying "Oops! This link appears to be broken" and a thing in the upper right hand corner saying "DNS error - cannot find server.

Now, my PS3 and my XP computer are both having the problem loading webpages within 30 minutes of connecting to the internet. There's gotta be a... Read more

A:New Router, DNS Server issue

Even though it appears you're having the same problem, please start a new thread when you have a new issue. It's very difficult to keep two problems straight and who's working on what in a single thread.

I've created a new thread for your issue here.

Note: You will need to post complete details of your configuration and your specific issue in this new thread for us to help you.

Thanks for your cooperation.
 

2 more replies
Answer Match 39.48%

Dear All,

It is my first Forums.

I am having problems with my laptop I am using Windows XP with SP2 and using DHCP client.In my office i am not access any external ( http://www.google.com). At the time I checked in my network connection In TCP/IP protocol Preferred DNS server takes some IP 84.xx.xx.xx.

After windows XP system restore It is fixed. Can I expect the permanent solution.

Advanced Thanks,
Ayyappan.H
 

A:Reg : Prefered DNS server Issue

Windows solution permanent? You must be new to computers. A system restore was was a bit drastic for a DNS problem. Next time post the problem first.
 

1 more replies
Answer Match 39.48%

Hi, I use firefox as my browser because of multi tab feature. Lets say I have a tab with 4 browsers to open say espn, cnn, SI and foxsports. I sometimes get an error of "server not found". The Firefox forum seems to think it is not an error with firefox but I think it is. I don't think it's an firewall issue because sometimes the site will appear and sometimes it wont.

What else could it be. I appreciate any positive responses.

TIA
 

A:Server Not Found Issue

I have had over 10 tabs open at once without an issue so it's more than likely not an issue with Firefox. Is it always the same web site that fails to open or doesn't it make a difference?
 

2 more replies
Answer Match 39.48%

I recently registered mydomain with Yahoo. I created a little web site. I decided to buy MDaemon Mail Server and host and look after my own mail. So I added my MX record to my Yahoo services so that Yhoo no longer look after any mail for me.

I opened the appropriate ports in my router and firewall to allow for this. I also got a static IP address from my ISP. But everytime I try to send a mail to a user @mydomain I get the following failed mail delivery message.

Message from yahoo.com.
Unable to deliver message to the following address(es).

<@yahoo.com>:
4.79.181.12 does not like recipient.
Remote host said: 501 Syntax error in parameters or arguments
Giving up.

--- Original message follows.

Return-Path: <[email protected]>
Message-ID: <[email protected]>
X-Yahoo-Forwarded: from [email protected] to @yahoo.com
X-Rocket-Track: 1: 100 ; IPCR=n-w0,n99,g1 ; IP=159.134.118.21 ; SERVER=216.155.197.136 # cat=UK; info=ip:NN<ip=159.134.118.21,policy=n-w0,n99,g1>;sv:UK<ip=216.155.197.136>;sg:UK<size=23,cnt=1>
X-Originating-IP: [159.134.118.21]
Authentication-Results: mta105.biz.mail.re2.yahoo.com
from=eircom.net; domainkeys=neutral (no sig)
Received: from 159.134.118.21 (HELO mail05.svc.cra.dublin.eircom.net) (159.134.118.21)
by mta105.biz.mail.re2.yahoo.com with SMTP; Tue, 12 Jul 2005 02:24:02 -0700
Received: (qmail 58042 messnum 3326923 invoked from network[159.134.237.83/webmail02.eircom.net]); 12 Jul 2005 09:24:01 -0000
Receiv... Read more

More replies
Answer Match 39.48%

I just have a quick question, I have setup a VPN using RRAS and L2TP shared secret, etc. From the client computer it connects no problem, and I can access shared resources on the LAN like it's supposed to work. The only problem is when I connect to the VPN, my browser doesn't work, can't get external internet to work and copying files from outlook 2007 to a shared resource seems to lock outlook up.

I'm not sure if this has something to do with sending all traffic over vpn or not. Is there any steps I can take to quickly resolve this issue? This seems to be the only thing affecting the users at the office.

Thanks,
 

A:Server 2003 VPN Issue

Is the VPN setup as a separate subnet example: if host 192.168.1.100 client 192.168.0.100.

Also depending on ISP and other possible settings you may need to use other DNS servers .

If so on the client try OpenDNS https://www.opendns.com/homenetwork/start/

Do this on the Client not on Server. Reboot let us know!

Mike
 

5 more replies
Answer Match 39.48%

I have a thread over the imaging section,

http://forums.techguy.org/digital-p...on-mf3240-scanner-axis-print.html#post8698740
But the problem may be a network issue? Perhaps some of the network gurus here might have some ideas?
 

A:USB scanner server issue

Please do not start more than one thread for the same issue.

I've moved the other one to the Hardware forum and am closing this one.
 

1 more replies
Answer Match 39.48%

Hey all, got a stumper that needs fresh ideas!

At work this afternoon our proxy server stopped providing internet and email access.

End users can't connect to their email because they get a POP3 error, one of the protocols that the proxy server provides. Same thing with their internet access - "proxy server is refusing connections".

The network itself is fine - I can ping every segment (every router, every hub, every switch) and the proxy server itself. The proxy can also be bypassed - allowing internet access. Not a feasible solution though.

The email services are all running. Both network cards are sending and receiving. The proxy server itself is connected to the internet. Email is being collected, run through our filters, and supposedly sent on its way. On the surface, everything seems to be fine....Yet no end user going through the proxy can get outside onto the internet or access the server's email portion.

Right now we're running a virus scan which will take hours to finish. Meanwhile, my shift ended and I went home - My manager can deal with it now.

I don't suspect it to be a virus or anything running in the background. Theres nothing fishy in the running processes and CPU and memory utilization appears normal. I was about to start powercycling network devices between the proxy and the rest of the network, but that seemed like a bad idea.
 

A:Proxy server issue

6 more replies
Answer Match 39.48%

Hi, I am running win 2000 Server as a print and licence machine, when accessing a domain through network places the error "Insufficient system resources exist to complete the requested service". This has me baffled - when viewing task mgr system idle is 99%. all patches/service packs up to date, it's running on a 100MB link, no errors are showing in the logs. all drivers also up to date.
Any Ideas??
 

More replies
Answer Match 39.48%

Hi, I am running win 2000 Server as a print and licence machine, when accessing a domain through network places the error "Insufficient system resources exist to complete the requested service". This has me baffled - when viewing task mgr system idle is 99%. all patches/service packs up to date, it's running on a 100MB link, no errors are showing in the logs. all drivers also up to date.
Any Ideas??
 

More replies
Answer Match 39.48%

Iam doing r& d on email headers,i want to trace an ip ad of the sender,so i change my firefox proxy server setting to 200.55.48.12 and port 8080 this is the proxy server ip ad, actual my public ip ad is 202.45.25.41.

But when i send an email ad from yahoo to gmail and when i check the email headers ,the ip ad of the sender is similar to my public ip ad even though i had change it to proxy server.

when we set our computer to proxy server and when we visit some website,the webserver see the proxy ip ad and not our real ip ad.

so then when i check the email headers it shows the real ip ad and not the proxy ip ad.

so what would be the reason.

A:proxy server issue

i have been caught in a scandal recently concerning all of this mess and what i learned is that whenever u send an email, it will ALWAYS show your public ip, meaning the ip that the isp has provided you with, and neeeeeever your browsers ip for security purposes. imagine if everyone could send an email using a randomized ip address in their explorer's settings, they would never be caught if they are harassing people by sendind emails!

2 more replies
Answer Match 39.48%

Yes, I'm <that> stupid, so please take it into consideration. I manage a server that has a RAID 5 on it. Not knowing what I was doing, I removed the hard drive in Slot 0 and then put the same drive back in to the same slot. Now the server won't boot completely.

After booting, I see this message "Slot 0 HP Smart Array 5i Controller Initializing" for a good amount of time. Then is says 1784 Slot 0 Drive Drive Array Failure. Then it tries to boot Cd, floppy, hard, and NIC. It ends up with Non system disk or disk error. Replace and strike any key when ready.

It's a HP Proliant DL380.

So, how screwed am I and what can I do to repair the damage?
 

A:Server RAID issue

Do you see a message to go into your scsi controller and configure the Raid? You need to force the raid to rebuild that drive... if raid 5 is fault tolerant, remember its always best with servers to not touch if you dont have to
 

1 more replies
Answer Match 39.48%

IE 11, Windows 8.1

On start-up of IE 11 I get the following error msg:
The proxy server isn?t responding



Check your proxy settings 127.0.0.1:49376.

I do not use a proxy server. If I go into LAN settings and deselect the proxy server and select Automatic Detect,  when I restart IE the settings go back to requiring a proxy server?!?!?
This is driving me up a wall.
TKS,

More replies
Answer Match 39.48%

Good day to you:

In the last few weeks the house hold has been losing wireless connections while wired connections stay up and running.

I suspect its my nephew who insists on leaving the router open as in no security - no mac filtering - no wep - wpsk etc. since he allows gamers to access his computer used as a server. Of course nephew is connected to via wired ethernet and we are all wireless. We all seem to lose connections at the same time. I suspect the routers limited RAM and hard mem firmware control flags dont allow for collisions and exceed-bandwidth usage from incoming gaming. I also suspect the open access to wireless connection doesnt have anything to do with it either since the dhcp client table never shows any unknown wireless connections.

I have been looking through the event viewer to find clues of which one is : wpad.hsd1.co.comcast.net listed as the DNS in a warning under a DNS Client Event 1014. I found a paper written several years ago concerning DNS manipulation and wpad.xxxanthything generally means an undefined DNS. if you ipconfig/all you can see the dns is correct except for the wpad portion. wpad is never there in that particular way of looking at the DNS. it only shows in the event viewer.

There are 5 affected computers when this happens except nephews two towers.

My first question is can the use of Torrent clients cause this sort of thing. or is it more likely traffic from gaming kicking us off. Ive seen some of his configs in the router and he... Read more

More replies
Answer Match 39.48%

delete this reply
 

A:Server/Network DNS issue

16 more replies
Answer Match 39.48%

I have a website on a server with Windows Server 2008 and been having firewall issues. On the client and server computers Privatefirewall v7 is installed. When the firewall is enabled on the server the website and VPN stops working although FTP, POP3 and SMTP servers work.

On the server the IP 192.168.0.2 has been added to the trusted sites and the 192.168.0.0 has been added to the trusted network. Windows firewall has been disabled on both computers.

Server
------
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1

Client
-----
IP Address: 192.168.0.2
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
any help would be appreciated
 

More replies
Answer Match 39.48%

Im not sure if I started this thread in the correct location so if it needs to be moved please do so.

My server at the house has Windows 2003 server, I have IIS installed and have one of my web pages hosted behind my Linksys wireless router/firewall. My server has a fixed IP address and the router has the IP address open with port 80. I do not have a static IP address. However, Dynsite and Zone Edit take care of that and the web site works fine. Now the issue, I have a total of four web sites to host, IIS gives me an IP address error when I try to start one of the other web sites. It has to be something silly im missing.
 

More replies
Answer Match 39.48%

The office is running Windows 2000 server and MS Exchange server with approx. 6 machines connected. When anybody in the office e-mails, the recipient is getting a different looking e-mail address than the one it is coming from. For example, if [email protected] sends an e-mail the recipient sees the e-mail coming from [email protected]. When the recipient tries to reply to the e-mail they get a "non-deliverable" message. What could be the cause of this and why would it be happening to everybody in the office at the same time? Thanks.
 

A:MS Exchange server issue

Look at your user settings in Active Directory. Generally, email accounts are the same as the user name unless you set it up manually or set up a policy that creates email accounts in the format you mentioned.
 

3 more replies
Answer Match 39.48%

I am running Windows 8.1 RTM (with all updates as of 10/3/13). I have an unRAID server in my local workgroup at home, which was connectable fine when my machine was Windows 7. Now it appears to have some issues.

If I browse to \\HADES (the machine name) it fails saying it "Windows could not find \\Hades"
If I browse to \\10.x.x.x (the machine IP) it works fine
The first week I was still able to get to Microsoft Internet Information Services 8 to access to UI to unRAID, now that is failing unless I use Microsoft Internet Information Services 8.

My unRAID server is a static IP
My Windows 8.1 server is a static IP
My router is Actiontec MI424WR-GEN3I

I tried modifying my host file just adding a "10.x.x.x HADES" line but that didn't work.

Any thoughts or ideas would be appreciated, I am totally lost.

A:Connecting to server issue

Originally Posted by wickedathletes


I am running Windows 8.1 RTM (with all updates as of 10/3/13). I have an unRAID server in my local workgroup at home, which was connectable fine when my machine was Windows 7. Now it appears to have some issues.

If I browse to \\HADES (the machine name) it fails saying it "Windows could not find \\Hades"
If I browse to \\10.x.x.x (the machine IP) it works fine
The first week I was still able to get to Microsoft Internet Information Services 8 to access to UI to unRAID, now that is failing unless I use Microsoft Internet Information Services 8.

My unRAID server is a static IP
My Windows 8.1 server is a static IP
My router is Actiontec MI424WR-GEN3I

I tried modifying my host file just adding a "10.x.x.x HADES" line but that didn't work.

Any thoughts or ideas would be appreciated, I am totally lost.



Is there a DNS server at all on the network? using the HOSTS file isn't always reliable.

Josh

3 more replies