Tech Problem Aggregator

Solved: HP Laser Jet 4050 configuration with Dynex wireless G Router

Q: Solved: HP Laser Jet 4050 configuration with Dynex wireless G Router

Components involved in network
Dell Dimension 3000 Tower OS Win XP SP 2
Dynex Wireless G Router
HP Laserjet 4050 TN
What I'm trying to do.

Get the wireless router to recognize the Laserjet and assign it an IP address though DCHP.
The laser jet was originally configured on a physical Net Gear Route, thus it has RJ45 ehternet connection. When I connect the laser jet, Dell PC and the Dynex Wireless Router. The wireless network works fine as far as a laptop accessing the network, BUT the router does not recognize the laserjet and does not assign it an ip address. The laser jet had an static address with its old configuration. How do I get the router's DHCP to recognize the laserjet and assigne it an IP address? Any ideas or ways to configure the Laserjet to accept an IP assignment or lease?

A: Solved: HP Laser Jet 4050 configuration with Dynex wireless G Router

14 more replies
Answer Match 92.82%

I have a Dynex router and I go into the settings to create a security password. It lets me select the type and add the security key but when I hit apply changes, it doesn't add the key to the router and it says security is still disabled. I'm hoping someone here has some advice on how to get this working. I have tried multiple browsers and different computers but it still doesn't save the security. I thought maybe a power cycle would work after saving the settings but still nothing. Help please!
 

A:Solved: Dynex Wireless N Router

I would reach out to Dynex Support.

I've never configured a Dynex router before so I can't vouch for how well their products work.
 

3 more replies
Answer Match 73.08%

I have my main computer with the following setup

Windows Vista connected to the router then to the modem in Bridge Mode (so that I can use NAT1 with my PS3), thus internet works fine for both, my Main Comp (Desktop) using PPPoe and PS3 using a wireless connection between my router but also through PPPoe.

However, in terms of my secondary computer (Desktop), I have a USB Wireless Adapter, but I do not seem to be able to find the configuration for going on to the internet through the router but to use PPPoe.

The following are my products

Router - D-Link DIR-625
Adapter - D-Link USB Wireless Adapter DWL-G122
Modem - SpeedStream 5200

Thanks
 

A:Solved: Modem Bridge Mode + Router + USB Wireless Adapter Configuration

I'm a bit confused. If you're connecting PPPoE with two devices, that indicates you have two modems, which sure doesn't sound right. What are you really doing here?
 

3 more replies
Answer Match 72.24%

Hello all,

I am having an issue here and I am not quite sure how to resolve it. I have a Microsoft Wireless Laser Mouse 8000 and I also have a wireless home network using a D-Link WBR-2310 wireless router. I am using Windows Vista, and when I am using the mouse with my computer and the wireless network enabled the mouse pointer moves very erratically and does not move smoothly at all. The computer is plugged in directly into the router with an ethernet cable, it is not using a wireless NIC card.

I am fairly certain this is from interference from the wireless router, i have tried different channels to see if I would get less interference but none of that seems to help any. There does not seem to be any settings for my mouse where i can choose what channel it is running on, it runs on Bluetooth. The wireless router is running 802.11g and as far as I know, this and Bluetooth both run at 2.4ghz.

Any ideas/suggestions?
 

More replies
Answer Match 68.04%

Greetings all.

I purchased a network capable laser jet 4050N from a used computer store. I'd like to be able to print to it via my wireless router (a linksys G2.4). I have read several posts, and frankly they baffle me (so perhaps I'm not a beginner but illiterate?) Anyway, I've plugged it into the router, but I can't see it.

Anyway, I have a new toshiba with vista installed. For reasons not clear to me, I can't seem to add the printer from the area where all the other printer's reside (says I do not have sufficient rights, although I'm the only user?)

The N version of the 4050 is network capable per factory installation (from what I've read it other posts). The printer has a jet direct menu, so that's a good sign as that is mentioned in other posts.

Basically what I need help with is:

* do i need a driver installed on the toshiba, and if so where to i get it as the one on the HP.com website won't download (link seems broken) even tho its supposed to support vista.
* can't i just run an ethernet cable between the printer and the router be able to see it an configure it? If not, what do I need to do to make that happen?

I generally am the kind of user that can follow directions pretty well from a corporate help desk, but the terminology in the threads just left me baffled. Any help here would be most welcome.

Thanks in advance!
C
 

A:Need help (for a beginner) to set up a 4050 N printer via a router

Actually, I solved the problem. I finally (and I mean finally) found the command to print the JetDirect Config page. Found the IP addy (which means that all the other posts made sense)... found an HP 4050 driver on the internet (it thinks the printer is color but that is the least of my problems at the moment) and now with the two together, it prints like a charm via the router. Who knew... thanks to all the folks who answered the other posts, I managed to put it together afterall.
 

1 more replies
Answer Match 66.36%

How can I find all the companies ip address for setting up wireless router? For example, Netgear, Linksys Dlink, and other compamies.
Thanks!!!!!
 

A:configuration of wireless router

How can I find all the companies ip address for setting up wireless routerClick to expand...

do you mean what default gateway they use
ie 192.168.0.1
or
192.168.254.254
etc

you could look in all the manuals - a lot of routers manuals are on the manufacturers sites - it would also give you the default username and password

why are you after so much info???
 

1 more replies
Answer Match 66.36%

Hey all,

Not sure if I'm in the right forum. A couple months ago I had to switch providers, and had to get hooked up with a wireless router. Ever since then, my download speeds have crash landed.

I'm running XP. Any tips on where to go for help would be appreciated.

thanks!
 

A:need help with wireless router configuration

What bandwidth are you supposed to be getting?

What speeds do you get with a test such as Speakeasy connecting by wireless, by ethernet to the router and directly to the modem?
 

1 more replies
Answer Match 66.36%

Hi guys!
I have a Wireless Router,Belkin F5D7230-4 Router.
Model: F5D7230-4 - Data Transfer Rate: 54 MBps - 2.4 GHz - Wireless Connection.

1)Previews we changed default ip address 192.168.2.1 to some thing.But now I forgot that default page ip address.How to get that page.I restarted that back side button.But it is not getting.Can any one any one?

2)How to configure it?

Thanks for Apperication.......
 

A:Wireless Router configuration

Hold the reset button for about 15 seconds. After that you should be able to use the 192.168.2.1 address to get back to the config page
 

1 more replies
Answer Match 65.52%

I have Serv-U 4.1 set up and I believe the only thing stopping someone from getting through is my settings on my DYNEX router. Is anyone familar with this router and can tell me what I have to do to allow FTP access through it?
Thanks
 

A:FTP through my DYNEX router

Never heard of it. If there is a section for NAT or port forwarding that is the section you need to edit. I would also change the FTP server to a non-standard port that is not port 21. I see that it is just a branded DLink router. Look at this page:

http://www.portforward.com/dynex/DX-E401-portforwarding.htm
 

3 more replies
Answer Match 65.1%

For some reason my router has the "system" light and the "WAN" light are flashing since yesterday for no reason. I have no clue how to fix this, i've tried restarting it, using the diagnose and repair option on my computer and nothing has worked. Can anyone help me with this issue please?
 

A:Dynex dx e-402 router issue

Are you sure it never did that before? Because according to the Quick Guide that's normal and means it's working/sending data. You can get the Quick Guide and Manual from the Dynex site: which mentions both http://www.dynexproducts.com/products/computer-accessories/DX-E402.html?supportTab=open
 

3 more replies
Answer Match 65.1%

I have been trying to get to my router through my internet browser by typing in the default gateway into the URL bar but it won't pull anything up. I have tried all the ip's on the CMD's list thing but none will work. It has worked in the past but for some reason not now. I am trying to get to the ports to open some up for a minecraft server. I have a windows 7 64 bit and a Dynex wireless G router that I haven't really messed with to much. So if any one could try to help it would be appreciated.

A:Dynex Router Problems

You might look at the instruction manual. There might be a reset button that will restore it to a know state from which to start over.

1 more replies
Answer Match 65.1%

At work I am trying to figure out how to configure out wireless router. What I need to be able to do is to have people who use wifi to be able to also connect to our office file server (which will have shared printers so we can monitor usage amongst different departments). How can I do this? 90% of the office connects through wires using a static ip. Would I need to configure the router with a static ip as well? If so, would the wifi laptops need to have a static ip as well?
 

A:Wireless router configuration for use with file server

If there is a DHCP server on your office network, the following configuration for the router and allow the connections you seek. You could also use a wireless bridge if you haven't purchased yet.
Connecting two (or more) SOHO broadband routers together.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. Leave the WAN port unconnected!

This procedure bypasses the routing function (NAT layer) and configures the router as a switch (or wireless access point for wireless routers).
 

1 more replies
Answer Match 65.1%

Hello,

Some of us don't use just a wireless router, but a combination of wireless and wired routers. In such cases the configuration of the devices can be a little tricky. But this thread it will be explained in depth, each step how to set up a wireless access points for laptops

This tutorial is going to explain how to set-up wireless for people who have setups similar to this model:

Modem -> Wired Router -> Wireless Router

Modem -> Wired Router -> Switch -> Wireless Router

***Note, there are pictures at the bottom of this post, use those for reference when going through this guide***

Supplies:

- Wireless router / power cord
- An ethernet cable to go from the router to the computer we'll be working with
- Oh, a computer with Internet Explorer or Firefox, no chrome yet lol

Step 1: Getting everything ready

- Take the wireless router, plug in the power, and take an ethernet cable from the back of the wireless router ***NOT THE INTERNET / WAN PORT but any port labled [1,2,3,4]*** plug the other end into the computer or laptop

- Now, once the laptop is booted up make sure its connected to the router
WIRED not WIRELESSLY

- Open up Internet Explorer or Firefox
- in the address bar type in the default router IP address which for dlink's is 192.168.0.1 for linksys products its usually 192.168.1.1 and hit enter
- if prompted for a username and password:
- dlink: username: admin password: blank
- linkys: username: admin password: admin

Step 2: Wirele... Read more

A:Wireless Router Configuration as a Access Point

I'm guessing its not too useful or it needs to be revised lol

5 more replies
Answer Match 64.26%

Hello

Version Info

Firmware Version
DX-WEGRTR_US_1.01.08
Boot Version
v1.02
Hardware
DX-WEGRTR v1000
Serial No.
20844DXER02196
LAN Settings
LAN/WLAN MAC
00:22:75:19:75:28
IP address
192.168.2.1
Subnet mask
255.255.255.0
DHCP Server
Enabled
Internet Settings

WAN MAC address
00:24:1d:18:f9:c5
Connection Type
Dynamic
Subnet mask
Wan IP
Default gateway
DNS Address
Features
NAT
Enabled
Firewall Settings
Disabled
SSID
MudiW1
Security
Disabled
WPS
Disabled

LAN Settings

LAN/WLAN MAC
00:22:75:19:75:28
IP address
192.168.2.1
Subnet mask
255.255.255.0
DHCP Server
Enabled

Features

NAT
Enabled
Firewall Settings
Disabled
SSID
MudiW1
Security
Disabled
WPS
Disabled

That is the info and status of my router. Sometimes using the explorer, can be IE or Google chrome, etc. For a min or two no websites works, so I have to restart the router or just wait a bit. It's really strange, since I can use MSN when that thing happens, so it means I still have internet connection.

Without counting the wifi doesn't work, I can connect to it, but I don't have any internet connection (Isnt my main problem atm, the other problem is really stressing me out)

THANKS A LOT.
 

A:Router sometimes disables my brwoser (DYNEX)

11 more replies
Answer Match 64.26%

Hi

I have a Dell 2350 wireless router which I have happily used in the UK for the last 12 months.

I have just relocated to Australia and am having real problems reconfiguring using the CD driver.

It acknowledges that there is an internet connection direct via the ethernet cable into the PC; following the steps the internet light is then on; then there are lots of flashing lights whilst it tries to configure; LAN port light flashes; but configuration fails; and there is no internet availability.

Please help if you can, I am at my wits end.

Thanks
 

A:Dell wireless router configuration / connectivity problem

I have had the same router for years, and in my personal and professional opinion, can it and buy a better one, it never worked well and was always laggy. but otherwise reset it to factory settings and begin setup from the ground up.
 

1 more replies
Answer Match 63.42%

Did anyone here buy one of these routers at Best Buy yet?
 

A:New Dynex DX-E402 Advanced Server Router

I bought a Dynex Network adapter a while back-> just curious as to why you ask cause I had problems with it and had to exchange it
 

4 more replies
Answer Match 63.42%

my internet connection uses PPPoE to connect to the internet. i'm trying to set up the router for this configuration but it does not work. if there is anything else i need to post up pls tell me...help!!
 

A:Configuration problem for belkin adsl2+ modem with wireless router

the MODEM uses PPPoE, the router should not. the ADSL modem will hold the connection
regardless of anything being active on your router or systems, so imo, the router
should not be configured for PPPoE.
 

1 more replies
Answer Match 63%

Ok I am at my wit's end. Please can someone help me set up my printer! I have a Samsung ML-2525W wireless laser printer and I'm trying to set it up so that I can print wirelessly from multiple computers at home. I've spent over 2 hours so far without any luck, all the stuff I'm getting from Samsung is no help at all. Please help walk me through this setup! thank you.
 

More replies
Answer Match 63%

I have 3 computers (XP, Vista 32 bit, and a W7 64 bit). All have a Microsoft Wireless Laser 5000 Mouse and all work great.

Recently I purchased 2 new Laser 5000's through Amazon. One for a gift and one spare. When I tried installing the gift mouse on an XP machine, it didn't work. The light on the adapter was on but the mouse cursor didn't move. It's like no software is installed. I brought it back home and tried it on one of my computers that has a Laser 5000 already on it and still nothing. Then I opened the new spare mouse and it has the same problem.

I've uninstalled and installed the software several times. My old original Laser 5000 still works. I've tried drivers from the CD that came with it and also from the Microsoft Web site. I checked the batteries and they're good. I've pushed the reset buttons. Device Manager says the devices are working. My old original mouse will not work with either of the new adapters and neither of the new mice will work with my old original working adapter.

The new mice were manufactured 3 months apart so I find it highly unlikely that it's a bad batch and 2 new mice with exactly the same problem is also highly unusual.

I'm open to any suggestions. I've installed a lot of wireless mice and had no problems, but now, two at the same time makes me think I must be overlooking something.
 

A:Solved: Two new MS Wireless Laser Mice with the same problem?

Are they on the right channels? Press the button on the receiver, than the reset button on the mouse so it can detect the receiver's channel.
 

3 more replies
Answer Match 62.58%

Hello,

http://www.amazon.co.uk/Logitech-620-Wireless-Laser-Mouse/dp/B000QRI270

I have one of these and every so often it the mouse pointer sticks for several seconds which is annoying when gaming etc. I've only had it a few months of which its been for the last 2 to 3.

I haven't got the software installed as I see no reason why it would prevent it sticking + sucks up system resources.

It does it both on my desk which is a plastic surface with a bubbly effect and a mouse mat, both clean.

Is there anything else which could be causing this or is it just due to wireless-ness?

Thanks!
 

More replies
Answer Match 62.16%

Does anyone know if thare is a Dynex wirless g driver that works with build 7000 64 bit? The driver on the disk says it doesen't work with 64 bit and the one I downloaded from the link below installs but nothing happens when I try to run it and it says it is running in the processes tab in task manager though.

I've tried installing it in compatiblity mode and runing it in compatability mode with no luck.

Dynex :: Products For Your Digital Life - Dynex Enhanced Wireless-G USB 2.0 Network Adapter

Thanks!

A:Dynex wireless g 64 bit driver

Any luck on this yet? I've got the same problem.

5 more replies
Answer Match 60.9%

I have a Dynex Wireless 11G Desktop Card Model: Dx-WGDTC and I cannot seem to find the right drivers to get this card to work. Windows find's the card but will not automatically install it with a generic driver.

I am running 64bit home premium. Any help would be greatly appreciated.

A:No Working Drivers for Dynex Wireless Card

Dynex :: Products For Your Digital Life - Dynex? 802.11g Wireless-G Wireless Desktop Card

Install like this if necessary.

Right click it in the device manager. Update driver software. Browse. Let me pick. Have disk. Browse. Find and double click on the .inf. Hit ok. Hit next.

7 more replies
Answer Match 60.9%

Having problems with this new mouse I bought... followed the instructions, linked them up, installed the drivers, now whenever I try to use the mouse, I have to push either the 4 or 5 button to even get the f'n thing to react.... and even that it only moves for a second.... any advice?
 

A:Dynex WOM100 Wireless Optical Mouse

Check the batteries.......
 

3 more replies
Answer Match 60.06%

I recently bought a Netgear Wireless N 150 router (although I haven't set it up yet). One reason I chose it is that I was told it can be used as a wired network between our two desktop computers, and as a wireless access point for the laptop. But frankly, I don't always trust what the sales people tell me.

I've read on many sites that wired computers have some advantages over wireless, including security and speed, so I prefer a wired LAN for the main computers (they are within feet of each other and will stay that way). But I would like the convenience of going online via the wireless connection with my laptop in the other room.

I've never done this before (I always just had a wired connection between the 2 desktops and didn't bother going online with the laptop) and I need to know if this setup will cause any problems I should know about.

Please don't suggest I go wireless for the entire LAN -- I'm just too set in my ways to make that leap right now. If my planned setup won't work, I'll stick with my current one and forget the laptop.

Barbara
 

A:Solved: Can I use my wireless router as wired router & wireless access point?

8 more replies
Answer Match 59.22%

My Internet cable is rj45. If i connect that cable directly to my pc, and set up the connection (PPPoe, requires a username and pass), i can access the internet.
then i bought a tp-link wr841n router which has a Wan (rj45) i/p socket.
and i ran the tp-links setup software, configured the router with the username and pass, but still it wont connect to the internet.
and help please ?
 

A:Solved: Router configuration

6 more replies
Answer Match 58.38%

Ok quick question, i currently have 2 Dlink DSL 2640R's networked together and set up correctly, the Master router is assigning DCHP addresses and the secondary is forwarding to the relevant computer thats connected to it.

I have two PC's both connected to the secondary router, which are able to network together and use the master routers internet,

However, my girlfriend is buying a new laptop next week, and wants to be able to stream music from one of my PC's to her Laptop while connected to the Master router (so she isnt affected by any lags due to networking happening between my two pc's i regularly switch files between them, hence the second router)

so 2 questions:
Firstly, am i right in my above statement that if My 2 pc's are transferring via router number 2 router number 1 will serve her with no overlap between the 2?

and Secondly, DCHP is off on the 2nd router, and as far as i can see, the main router see's my pc's and the 2nd router is invisible, so am i right in thinking that her PC will be able to see both my PC's on the 2nd router? or will she just see router number 2? (i read somewhere that some routers see all clients connected to the 2nd router as one IP address and the 2nd router sorts it out when it gets there)
 

A:Solved: Multi Router Configuration

8 more replies
Answer Match 58.38%

Is there a difference b/w a wireless router that will hok up to a broadband modem connection and one that will link to a cable modem connection ?

I was planning to buy the linksys wrt 54gs but i have a broadband modem which connects to the telephone jack at one end and to the rj45 jack on my notebook for which i also need to buy a nic card. is that the correct one to buy ?

Thanks !
 

A:Solved: Diff b/w wireless bb router and a wireless cable router

Yes. The key is the RJ-45 on the modem; you need a broadband router with a WAN ethernet port. That model will do fine. And you'll then connect the laptop to the router via wireless or a straight ethernet cable. You may need a cross over cable to go between the router and the modem.
 

2 more replies
Answer Match 57.96%

hello guys,

good day! please i need your help on what to do's regarding wrh54g client configuration. i been setting up today the point of access for its secured network mode with WPA shared key on XP-SP3. tried successfully on a client with windows7 lappy, but then my problem was that my boss want me to set it on a manual mode. i mean, he wanted it that everytime he disconnect the wireless and decide to connect again later he likes to input again the password. but as ive see it everytime i tried to reconnect, the password is automatically inputted already and ready to connect. not unless u click the wpa box and the password will be deleted. boss wanted this kind of setup for security purposes. i hope u can help me on this matter. my other options also were not successful.

all comment and help will be highly appreciated.

regards,

twinx

A:[SOLVED] please help on WRH54G router client configuration..

Let me say this much. If that were the case with my wireless network, I would be entering my 64 character passkey every time I connected to my wireless network. I could just copy and paste it from a text file, but then what is the point of doing that over just letting the computer save it for me? If your boss wants to make sure his wireless security is strong, his efforts are much better spent doing what I have done by going to the website linked below, copying the "64 random hexadecimal characters (0-9 and A-F)", while using either WPA, or WPA2. The kind of authentication I think he is getting at, is something a radius server would be better at providing, provided your computers were part of a domain.

https://www.grc.com/passwords.htm

In Windows 7, I know it is possible to have it not remember your passkey provided that you do not check the checkbox during the connection setup. My memory is a little off with XP. Does it provide something similar?

5 more replies
Answer Match 57.96%

I had a couple of guests over and they were having problems getting online (actually they were on for a day but one laptop dropped) the problem was with the guest laptop itself. While troubleshooting we opened the router as an access point. It gave us a new address for configuration but did not get it all down. It is a Belkin Wireless G router and the previous config address was 192.168.2.1 the new one was 192.168. then 2 0r 1 follwoed by three number sequence I believe starting with 2 (I tried 245 and 254). When I right click on my wireless connection icon and go to properties none of the address work some now start with 70. Is the a way to find the address and if not how do I reset my router?
 

A:Solved: A Router Default Configuration Address?

6 more replies
Answer Match 57.96%

I apologize if I posted this in the wrong section.

I have been trying to achieve a Remote Desktop Connection with my office PC (Host -- Win XP Pro service pack 3) with my wireless laptop (Client -- Win XP Home) at my house.

The RDC works at my office in the LAN, when I have my laptop connected in the office network. However, from my home's LAN, I cannot access the Host over the Internet (WAN).

I have tried to open port 3389 for the RDC in the PortForwarding section on my Office's D-Link DIR-615 router setup and did the same for my home's belkin 54G router at home, under Virtual Server, in that setup.

Has anyone had this type of problem with Microsoft Remote Desktop?
 

A:Solved: Correct setup of DIR-615 router configuration for RDC

16 more replies
Answer Match 57.54%

Yesterday I bought a Wireless Internet Keyboard And Wireless Laser Mouse from the Brand:Micro Innovations and I did everything it said but when im about to install the software I leave the non wireless mouse that I used to have plugged in to install the software... so I install it and the wireless keyboard works great but the wireless laser mouse doesnt work... any suggestions....PLEASE HELP
 

More replies
Answer Match 57.54%

I had to replace my keyboard after 3 1/2 yrs since the keys were sticking and the letters worn off. I bought the Microsoft Wireless Laser 6000 Mouse with the wireless keyboard. It works great with one problem. If I enable "allow this device to bring computer out of Standby" for either the mouse or the keyboard, the computer never goes into a full standby. The fan is always running and so are some other parts of the computer. If I dont configure the mouse or keyboard that way, the computer will go into regular and complete standby but will need to be turned on with the power button to bring it out of standby. The Receiver is USB so Im thinking the reason the computer doesnt completly power down is due to the receiver needing to be active. Is there a work around or do I just stick with using the power button?
 

A:Microsoft Wireless Laser Mouse and Wireless Comfort Keyboard

I'd stick with using the power button
 

1 more replies
Answer Match 57.12%

My computer is connected wirelessly to a Linksys router, which is connected to the internet through a modem/router that my ISP provided. When I enter 192.168.0.1, I am taken to the configuration page for my ISP's router. How do I access the Linksys router's configuration page?

I have tried all sorts of combinations of 192.168.x.x, but nothing has worked. Is there a way to figure out the address the Linksys router's configuration page? ...or is there a reason I am unable to access it?
 

A:Solved: Trouble accessing router's configuration page

9 more replies
Answer Match 56.7%

I bought a new wireless internet keyboard and laser mouse yesterday but when i install the software in the computer only the wireless keyboard works but not the wireless laser mouse.....when I install software I leave the other mouse in to control everything...do you think it is because of that...but if I dont leave the other mouse in how am I going to control things to install software....Could Somebody Please help
 

More replies
Answer Match 56.28%

I'm having a problem accessng the Wireless Zero Configuration in another computer. When I went to the windows website for help it said that there was a Computer Management i had to click after running devmgmt.msc.. The problem is that i couldn't find it. Any ideas on how? The computer is a DELL Inspron 700m
 

More replies
Answer Match 56.28%

Recently I purchased a new wireless N router, and have moved the older wireless G router downstairs, where I hope to be able bridge a connection between the two. Google results, ironically enough, have suggested Googling instructions on setting such a thing up.

Connected to this computer (which is upstairs) is the new one, a Belkin Wireless N model no. F5D8236-4 Version 1. Downstairs the the old Linksys Wireless G model no. WRT54GS Version 6. I have a friend who works a lot with networking, who is skeptical of the idea, but Googling it has returned hope that it is possible. The main dispute is how.

Here's the setup: This computer is wired to the Belkin router, which is wired into the modem and is also currently hosting the house's wireless network. The Linksys is downstairs wired only to my Xbox 360. My attempts at even trying to find where to configure these routers have proved pathetic, so I've been driven here.

Could this work, and will it work with these two routers? If so, how do I go about it?
 

A:Solved: Wireless Router to Wireless Router Connection?

11 more replies
Answer Match 55.86%

Hope this isn't confusing but, my internet provider (my cable company) came in to set up a wireless modem/router when we upped our internet speed today. We have three desktop computers which are hard wired to our existing Linksys router which we have been using previously. Would it be in our best interest to turn off the wireless function of that router (it's hooked up to the new modem/wireless router so the hardwired computers can function since the new unit has no ports to plug in the desktop computers into). Our wireless devices are all 'connected' to the new modem/router (using its passphrase and SSID). Can the wireless capabilities of each interfere with each other? They are sitting right next to each other.
 

A:Solved: Internet provider wireless modem/router and my hard wired router

It's confusing to me, but can make two comments ...

a. If you are not using the wireless network of a router it's best to disable or turn off the wireless--saves electricity and should extend the life of the router.

b. Two wireless networks whose channel numbers are less than five from each other can interfere. In North America if possible use channels 1, 6 and 11 to guarantee non interference.
 

2 more replies
Answer Match 55.86%

Hi there,

My laptop runs on a wireless network at home, but lately, the Wireless Zero Configuration Utility has been acting up. When my laptop becomes connected to the home network, the service itself will go from "Started", to "Stopping". So basically, using the Wireless Zero means that I can only stay online for a couple of seconds before the service resets itself to "Stopping", and back to "started". I'm not really sure what's happening, nor have I received any error codes or messages. All i know is, my Wireless Zero Configuration Utility is switching on and off. The only way I could get online, was to wait for the service to connect me to my network, and disable the service once i was connected, so that it wouldn't reset itself every 10 seconds. Any insight or advice would be greatly appreciated.

Thanks in advance.
 

A:Solved: Wireless Zero Configuration Resetting

13 more replies
Answer Match 55.86%

Hello all, I'm having an issue with the Wireless Zero Configuration service

in tools>administrative services the service is set to "automatically" but never says "started" unless it is double clicked on and "start" is clicked

this means that starting it manually is required for some reason after every reboot I try even though it states it is set to automaticall

I checked the registry entry and it is set to automatically, I also uninstalled the intel proset driver incase there was a conflict....I'm unsure of what else to try, please advise

The computer I'm having this issue on is a Dell latitude D820 and the version of windows is XP Pro Service pack 2

please advise
 

A:Solved: Wireless Zero Configuration issue

7 more replies
Answer Match 55.44%

I just want to know how to bridge my comtrend 5071t dsl router with my linksys wrt160n wireless router
 

A:Solved: How do I bridge my comtrend dsl router with my wireless linksys router

12 more replies
Answer Match 55.44%

I went to a small office that has a DSL connection. It seems to be going through a router of some kind because they all have IP adresses with the first 3 octets being the same number. (e.g. 69.147.292.xxx). I hooked up a wireless router to one of the network connections and attached 3 pc's to it. Of course they now all have addresses like 192.168.2.xxx. Router is a Belkin 802.11g router.

Can I still share resources from the 192.168.2.xxx machines with the ones that have the 69.147.292.xxx addresses?

Thanks.

Ken
 

A:Solved: Sharing resources on a hardwired router with a ones on a wireless router.

13 more replies
Answer Match 55.02%

i have set it to start automatically but the service wont start unless i go to services and manually press start service it works fine but how do i get it to start automatically?
 

A:Solved: wireless zero configuration wont start?

Silly question but I'll ask it anyway
Did you click on OK or Apply after making the changes in Wireless Zero Configuration Properties?
 

3 more replies
Answer Match 55.02%

Can anyone tell me how to stop the "Use Windows to configure my wireless network settings" tickbox from unticking everytime I cold boot my Laptop. I have to go into Wireless Networks and retick the box each time to get my wireless connection to work.
Many thanks
 

A:Solved: Windows XP configuration of wireless connection

Control Panel - Administrative Tools - Services - scroll to Wireless Zero Configuration and check the Startup Type. It should be 'Automatic' for what you want.

If your wireless adapter's utility is launched at startup (and disables WZC) then stop it (remove it's shortcut icon from the Startup folder or use msconfig).
 

3 more replies
Answer Match 55.02%

Hi,

I have just bought a D-Link DP-G310 wireless print server and am having problems getting it to work the way I want. I want to be able to print wirelessly from my laptop i.e with neither the laptop or the print server connected by cables to my router.

I did not find the instructions that helpful but have managed to configure the print server so that it connects to my wireless network. The problem is that I can only print if the laptop is connected to my router by cable. If I disconnect the cable, the laptop will connect to the router (and the internet) but will not print. I can also only access the print servers config menu via the cable. If I am connected to the router via the cable, I do not have internet access following the tcp/ip configuration changes I made to be able to get to the print server

Do I need to do anything to the wireless tcp/ip configuration to get it to see the printer (not too sure what I am doing in this area!) Will any such changes interfere with internet access?

Thanks in advance for any help.

Dave.

I have Windows XP on the laptop
 

A:Solved: Wireless Print Sever Configuration

8 more replies
Answer Match 55.02%

OS: Windows 7 Home Premium -- Service Pack 1, 64-bit
Browser: IE 9
Computer: Dell Studio 1745

I am receiving an error message window titled "Wireless Configuration" with the following message:

"OLE initialization failed. Make sure that the OLE libraries are the correct version."

I cannot find anything about updating OLE libraries in Windows 7. I have not installed any new software, and my computer is barely 2 years old. I do not find it a coinicidence that my free Dell tech support expired last month, and now I'm having issues with the Dell wireless card.

Thanks for any help you could provide.
 

A:Solved: Wireless Configuration Error Message

8 more replies
Answer Match 55.02%

Ok, so I've been beating my head over this one. And not only have I been beating my head but I've wasted several hours on it too.

The company that I work for purchased a few wireless units from Newegg. The model they chose was the TrendNET TEW-639GR model (you can find the user guide here.)

So here is what we are trying to do and what is keeping us from doing it.

These units work great if you just want to plug it in and connect to the internet. We plug a network cable from our master switch into the WAN port and then wireless works fine, or plugging into the LAN ports on the back works fine. However it assigns the default 192.168.10.100-200 range to anything that connects to them. Our company uses the 10.10.0.1 to 10.11.0.255 range. So while the internet works, other network functions do not; like opening a connection to our AS/400 or RDC.

I cannot for the life of me get this to work the way we want. If I tell the wireless unit to use the DHCP range of 10.10.0.80 to 10.10.0.100 it reboots and we cannot get back into the device to manage it and it will not allow anything connected to it to access the network or the internet at all. This, even though it assigns the IP to said devices just fine. It just will not work the way it should.

Perhaps I am missing something? If you guys can help me out I would appreciate it so much.

Please let me know if you need further information.

Thank you for looking at this message.

Matt Hall
 

A:Solved: TrendNET Wireless IP Configuration Problem

6 more replies
Answer Match 55.02%

Yes hi,
I have a dk-wbkb Dynex model Keyboard and for some reason my sound key's (mute key) will not work. Can someone please help me out? I am not sure if it is a regedit reason or just needs to be cleaned. I clean my keyboard at least once every few weeks.

Thanks
Image contributed by images on google and image shack
Also I have posted a second query about my computer going to sleep and shutting down rapidly, everytime I come back an hour or more later on a different post.
 

A:Solved: Help with Dynex keyboard

Did you install the keyboard software to enable those keys? It should have come with a CD o try their website.
 

1 more replies
Answer Match 55.02%

Hey all,

I'm trying to connect my wireless router to my wired router.

Ideally I want the following: internet--> A --> 3 PCs + B -->itouch+ps3 +laptops

A: Gnet External ADSL modem with 4-port switch bb0055 (note: this is a modem/wired router)
B: Trendnet Wireless router tew-639gr

All 3 PCs have internet, so i'm sure my wired router is working properly. Using an ethernet cable, I've connected a Lan port in my Wireless router to a Lan port in my Wired router. My itouch, ps3, and laptops can connect to my wireless but I'm not getting any internet. I've also been able to access my wireless settings and change a couple of things.

From what I've read online, In B, I need to turn off the LAN DHCP and change my LAN IP Address. I've tried a couple of things but it still isn't working. Also what should I set my WAN settings to in my wireless router?

Thanks,
 

A:Solved: Connect Wireless Router to Wired Router

Nvm fixed it somehow...
 

1 more replies
Answer Match 55.02%

My small home network is connected to a Z100G Zone Alarm router via wires. This router has WiFi but I do not use it as it is not wireless N capable. I would like to have wireless N to stream movies to a wireless N BluRay player. I would like to keep the Z100G because of the firewall function.

Can I just connect a new wireless N router to the Z100G? If so, would it then be best to connect all the network computers to the new router either via wired or wireless?

Thanks...
Dennis
 

A:Solved: Connect Wireless Router to Wired Router?

7 more replies
Answer Match 55.02%

First I would like to say hello to everyone in the community as this is my first post. I would like to set up Linksys wireless router(wrt160n) with a Dlink wired router(DLR-604),The wireless would be the host router and I would like to isolate the wired router from that network,to protect my main computer's(2computer's plus network printer) from from my children s and friend's machines I connect to the wireless or wired ports on the Linksys.Thanks in advance, any advice or assistance would be greatly appreciated .Cheers
 

A:Solved: Connect wireless router and wired router

This should be pretty easy. Just connect the D-Link router's WAN port to one of the Linksys router's LAN ports. The computers connected to the D-Link router will be isolated from the Linksys connected computers by the D-Link router's NAT firewall.
 

3 more replies
Answer Match 54.6%

Hello First time poster here.

I've got a Asus EEE PC 1005PE netbook with Windows 7 Starter Edition. In attempt to clear some memory space (foolishly I couldn't wait two days until a 2G memory stick arrives in mail..) I'd messed up with msconfig and services.msc.

I've followed a guide online to change some service's mode to disable/manual.. and when I restarted the computer the wireless stopped working! Windows troubleshooting gives me no solution. I connected to online using LAN cable and tried to set all the services back to default modes but obviously missed something because network still can't be detected. Seeing as it doesn't show other people's networks either which I usually see along with my own, I don't think it's the router's fault. Everything working perfectly until I changed the service modes and restarted the computer anyways.

Since I have no idea which information you might need to give solution I'm including some screenshots of my Windows' current services states, wireless modem properties, and Window Features(just in case).



Thanks in advance!
 

A:Solved: Wireless Detection Disabled After Service Configuration

6 more replies
Answer Match 54.6%

After running a system update on a Acer Extensa 5620z running vista home basic serive pack 2 a popup appears saying "wireless configuration-notification dll has not been registered, program will not work correctly"

I cant seem to figure out whats casing it.I tried system restore but its still the same.From my research its an unregistered dll and it can be fixed if it is registered but i don't know what dll it is or how to register it if I did.

I have attached a link to a screen shot to and a link to the site on registration instructions.
If anything else is needed please let me know.
http://social.technet.microsoft.com...g/thread/265f4de3-31ac-4fe3-bee5-e75872656a6b

 

A:Solved: wireless configuration-notification dll has not been registered, program will

Still looking for help with this.
 

3 more replies
Answer Match 54.18%

Hi guys, I've got a bit of a problem here. See, sometimes the router has too many devices connected to it and the other people living with me don't understand this so they keep their iPhones, iPads, laptops, et cetera connected via WiFi even though I tell them to turn off the WiFi setting when they're not using it. So it kicks me off constantly, not sure why, but I don't mind too much.
Basically when I'm "connected" but not really connected I remotely reset the router so I don't have to walk upstairs all the time.

Anyway, I've reset it without troubles before. But did it tonight and now it's completely screwed up. I run a windows diagnostics test and it comes up with:
"Wireless network connection doesn't have a valid IP configuration."

Now I've been searching the internet from my iPhone to find solutions all night and came across this thread:
http://forums.techguy.org/networking/1019884-solved-wireless-network-connection-doesnt.html

I've tried doing the things suggested in there but it's not really working too well. Here's my ipconfig /all
Code:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : VAIO
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
... Read more

A:Solved: Wireless network connection doesn't have a valid IP configuration

16 more replies
Answer Match 54.18%

I'm trying to install a Netgear wireless card in my new computer , XP Pro, and I get a pop uthat says I need to disable the windows xp wireless network configuration utility. I click on trying to close the pop up and the computer keepd rebooting. I think there is a conflict with the new Netgear software wireless and the Windows XP software. How do I disable the Windows XP Wireless Network Configuration Utility?
Thanks
 

A:Solved: Need to Disable Windows Wireless Network Configuration Utility

Run services.msc and look for it in the Services list. Double click to access its properties ("Wireless Zero Configuration") and set the startup mode to disabled and reboot.
 

3 more replies
Answer Match 54.18%

Two days ago one of my laptops stopped accessing the internet even though it connects to the wireless router (BT Homehub3). Other laptops, Iphones, Xboxes etc still work fine on the same network.

Running Diagnose Connection Problems produces the following error message Wireless network connection doesn't have a valid IP configuration

Running the BT Homehub set up utility it connects to the hub but it fails to set up wireless connection saying that the wireless key is incorrect or there is another problem. It then suggests a wired connection which fails to connect (tried different ethernet cables and ports)

After googling for solutions I have tried the following suggestions without success

ipconfig /all

and the successfully pinging the resulting IP address, default gateway & DNS server

ipconfig /release

ipconfig /renew

After the renew prompt the following message appeared: unable to contact your DHCP server. Request has timed out.

In services.msc I disabled and restarted DHCP Client

I have also tried

netsh int ip reset reset.log

netsh winsock reset catalog

as suggested elsewhere on this forum, again without success.

I thought I had cracked it when I found a Microsoft Fix-it-for-me tool (MSfixit50199) but it made no difference.

Any suggestions gratefully received.

System info below:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU T4400 @ 2.20... Read more

A:Solved: Wireless network connection doesn't have a valid IP configuration

13 more replies
Answer Match 54.18%

HI. I have been fighting with my computer for 2 days now. All other computers in my house can connect wirelessly just fine. The computer with the issues was just brought back from college and can't get any internet connection. It connects to the signal just fine, but there is no internet and when I run the diagnostics the problem of the wireless network connection does not have a valid IP address pops up. And it also says there is a problem with wireless adapter or access point. My only guess is that something is blocking it but i can't tell what. Everything else connects fine and gets internet. Juse the one desktop using the wireless adapter will not get internet. Here is the ipconfig /all results. Any helps is appreciated thanks.
C:\Users\Sam>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Sam-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR5BWB222 Wireless Network Adapte
r
Physical Address. . . . . . . . . : 74-E5-43-0F-03-6E
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5075:ff1f:6592:853c%14(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.133.60(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
De... Read more

A:Solved: Wireless Network Connection Doesn't have a valid IP configuration.

16 more replies
Answer Match 54.18%

hi i just bought a new laptop and i cant seem to connect to the internet using wireless or Ethernet cable. i looked over other posts on the net looking for a solution but none of them works... the error says
"wireless network connection doesn't have a valid ip configuration"

please help guys
 

A:Solved: wireless network connection doesn't have a valid ip configuration

10 more replies
Answer Match 53.76%

Hello Everyone,

I just wanna ask for some help regarding configuration of a vpn firewall router that is connected to a 4g modem/router combo.
I am new in setting up a vpn and not so much familiar with others things or what setup is necessary, kindly help the poor guy please???

This is what I need:
- I need to connect the VPN FIREWALL router and use its features at the same time connected to the internet ( the VPN FIREWALL will act as the security for the whole network and the 4G modem/router will be the one supplying the internet)
- Need to establish a VPN connection later after the configuration.
- The server and other lan pc's must be accessible outside the local network when connected to VPN (web server, local pc's shared folder and files, etc)

Here's some details that i hope might help:
- I am using a Quanta 1K5 4G LTE modem/router combo
- I am using a Dynamic public IP address,( but this is not a problem because i am using s DDNS)
- My VPN FIREWALL brand/model is Micronet SP881 B VPN FIREWALL router
- Right now i am already connected to the internet using the vpn firewall physical connection is:
4G modem/router-->hub-->VPN firewall router-->PC
my connection is 4G(LAN)-->VPN (WAN) set the connection type to Dynamic IP
-The remote connection and remote access (web server, ftp,RDP) is working fine on the 4G modem/router alone.

I attached some screenshots of the VPN firewall router
Looking forward to hear from you guys, Thanks in advance!
&nb... Read more

A:HELP! 4g modem/router combo to vpn firewall router configuration

7 more replies
Answer Match 53.76%

I have a Dsl router(provided by my isp) and a wireless router(Tp-link).my dsl router has the ip 192.168.1.1 and wireless has 192.168.2.1 .I have a PC connected directly to isp router, my brother has a laptop connected to wireless router.He can access both routers but i can only access the main router.
Is there any way i can access both the routers?
 

A:Solved: Accesing wireless router over DSL router

Hi WarkaDang, and welcome to TSG,

Do you mean you wish to access the administration pages on both routers? Is so ...

Assuming your computer is using a wired connection to the DSL router and the Wireless router includes LAN ports, the simplest solution would be to plug your computer into one of the LAN ports of the wireless router.

Otherwise, you would need to see if the wireless router supports accessing the admin pages through the WAN port.
WARNING NOTE: Configuring the router to enable WAN access to the administration pages may make it vulnerable to attacks from hackers on the Internet.
 

3 more replies
Answer Match 53.76%

Hi to all at TSG

okay so i finally broke down and bought a laptop. I have 2 questions #1 i have a router provided to me by my isp provider for my desktop (verizon DSL ) the router has a 2 options in the back one is for a RJ45 jack, the other is a USB connection can i hook my laptop to this USB connection? ( i know it would not be considered wireless ) If so does the cable i have to buy have USB at one end and RJ45 at the other. Or USB to USB ? always had a desktop and if two people are on at the same time my wife on my desktop and me on my laptop is download and upload speed compromised or for that matter can we even be on at the same time ? Now to my 2nd question what wireless router should i put my money on or do i have to get it from verizon?

Thanx in advance to all those who take the time to respond or to even peruse these silly questions
 

A:Solved: Router & wireless router questions ?

12 more replies
Answer Match 53.76%

I just purchased a wireless router (Linksys) to set up as a wireless access point connected via an ethernet cable to another Linksys wireless router that is connected to my DSL modem. I know I need to connect LAN port to LAN port, but do I need a "straight through" or a "switched/crossover" cable? As I have done some reading, some directions say straight, others say switched, some don't say at all. I just want to be sure I don't have a cabling issue. Thanks in advance for any information.
 

A:Solved: Connecting Wireless access point and wireless router

Well, a crossover cable will certainly work. If either end of the routers have auto-MDX ports, a straight patch cable will work as well.
 

1 more replies
Answer Match 53.76%

I have a Presario M2000 with Windows XP. I have been using a Linksys WRT54G wireless router for three years with no problems. Recently a relative, unable to find the Encryption Key, "reset" the router. It still works fine but it is now an unsecured connection.

I tried to secure the connection by running the Linksys installation CD four times. I called Linksys and was informed that my service contract, which I did not know I had, had expired. If I paid them $39.99 they would walk me through a new installation that I could make secure.

I tried to check out their website, linsysbycisco.com, but it seems not to exist!

I had no idea that I would not be able to change the security settings of the router after a certain amount of time! Is there anything I can do, short of paying them $39.99, to make the wireless router connection secure?

(I am a new member and posted this question twice as I titiled my first inquiry with my user name...sorry!!!! ....wont do it again!)
 

A:Solved: Reset wireless router now can't secure the wireless connection!

That is a pretty common Linksys router and you should just be able to download the router manual from Linksys's website and go into the Web Interface of the router to setup the Wireless encryption again.
 

2 more replies
Answer Match 53.76%

This seems like it is isolated enough to figure out.

So there's a home network with desktops that are wired and 2 laptops that are wireless. The 1 wireless laptop has had a fresh reinstall of windows XP + all updates.

The problem is that the laptop has problems connecting to certain sites. When we browse to some sites, the images won't dowload (i think it times out) and it shows boxes with Xs in them. some sites work fine, but some always bad.

We've tried the laptop on a different wireless network in a different location and everything worked fine. We've also tried it at the home network with a wired connection, and again it works fine. The other laptop works fine in the home network wirelessly.
The problem only happens when the 1 laptop is on wireless on this 1 router.

I have tried lowering the MTU settings.

another thing that may be related: the problem started around the same time as we initially added the 2nd laptop to the network (it may have been a few days before or after). But when the 2nd laptop is turned off, the problem persists.

Thanks for any help you might volunteer
 

A:Solved: Wireless laptop can't visit certain sites on 1 wireless router

Please supply the following info, exact make and models of the equipment please.

Make and model of the broadband modem.
Make and model of the router.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Make/model of your computer.
Version and patch level of Windows on all affected machines, i.e. XP-Home (or XP-Pro), SP2, Vista, etc.

Also, please give an exact description of your problem symptoms, including the exact text of any error messages.
 

3 more replies
Answer Match 53.76%

Hello,I have replaced our old router with a new one and can't seem to get it to work.I have a Sierra Wiress 306 3g Modem, connected with Bigpond. It is working when plugged directly into the computer via USB.I had it plugged into a Netcomm router, which was ethernet cable connected to the destop and also our TIVO device. I was able to link o the internet wirelessly from my laptop - though not if someone was using the desktop at the same time. I suspect an IP address conflict was at fault here, though had no clue how to fix that.My actual problem is my Netcom router no longer works and I've had to purchase another. When I plug my router into the computer I get an error message saying there is another computer on this network with the IP address.... but I tried to change the IP address of the router, to no avail....I returned that router and got another and ended up with the same problem. Something tells me there's nothing wrong with the router or my computer, but perhaps it's my incompetence.That's where you come in...Thanks,Jennifer.
 

A:Solved: Unable to use wireless router with 3g wireless internet modem

13 more replies
Answer Match 53.34%

Hi All.!
I'm new user in this community..
Here is the thing,
I'm trying to connect to the newly installed wifi router my dell laptop is connecting to that network but no internet access, my all other machines are working on the same net but dell inpiron 3521. after running a troubleshot i'm getting Error Detected: "Wireless Network Connection" doesn't have a valid IP configuration"...
I've read and tried the fixes, but nothing worked for me, even tried to find and disable the webroot client service but couldn't find it..! Please help if somebody have fixed this with an easy method.
 

A:Solved: Wireless Network Connection" doesn't have a valid IP configuration

16 more replies
Answer Match 53.34%

Hello
I have a new TL-WR740N router by TP-Link. I set up the network with a visible SSID and WPA2 password and I access the internet with no problem from my Windows 7 laptop.

My mom's laptop with Windows Vista is giving an error that I had never seen before (she has used several wireless networks before without any problems). The computer connects to the network and tells me to "Press the configuration button" on the router. The router doesn't have a configuration button. If I click "Next" it will say it "Could not get settings from TP-LINK TL-WR740N - Verify the device PIN (...)" When it first tells me to press the configuration button, I don't have to click next - there is an option that says "I can't find the configuration button, I want to enter a key or passphrase instead." So I click there and put the password. It connects to the network, but only locally. No internet.

I have tried turning the router off and back on (that used to solve a similar problem some time ago). If we plug the router to her laptop using that LAN cable, then she can use internet. I tried to set up the network a second time (the SSID, the password and stuff) using her computer instead of mine, but that didn't do anything.

Thank you very much in advance '=)
 

A:Solved: Connected to wireless network, but no internet (configuration button and devi

6 more replies
Answer Match 53.34%

Hello, I specifically want a wireless-router with an on/off switch for the WiFi itself. Ideally a switch that will stay in postion until you press it again.

Apart from that the router needs to have all round good performance. Price isnt too much of an issue.

I'd really appreicate any help. Thank you.
 

A:Solved: Need Help to Find A Wireless Router with Wireless on/off Switch

8 more replies
Answer Match 53.34%

I got a new Linksys E2000 router a few weeks ago. It works fine with all the wireless laptops I have in the house, however I can not get an internet connection on this particular desktop PC using a Linksys Wireless-G PCI Network Adapter.

I've tried updating the driver but to no avail.

Any help would be apreciated.

Thanks.
 

A:Solved: New wireless-N router won't work with wireless-G PCI adapter

Shouldn't be a problem unless you have the router set to use 'N' only mode.

What encryption are you using? Have you tried connecting w/o encryption?
 

3 more replies
Answer Match 53.34%

Got a wierd problem here.

Got a Zyxel wireless modem router. The wireless part works perfect but when I plug in a RJ-45 (ethernet cable) into on of the ports and then into the network card on a desktop computer - its gets no internet. I can login to the router from the desktop fine.

I thought this was the computer it-self.

So I got a laptop, and plugged the same cable into it - still no internet connection.
(The cable was replaced with another RJ-45 - so it is not the cable - this problem is baffling me)

Any ideas anyone?
 

A:Solved: Wireless Router - Wireless Pefect but no signal from RJ-45

14 more replies
Answer Match 53.34%

iam new to Wireless Router and i want to get one so i started looking for one and found Wireless Router & Wireless Access Point . now i need to know which one should i get and what brand . i don't want to get the wrong thing ang wast $$$. i have one pc & one labtop and Internet access(adsl) range to cover for the pc is 60feet from the Router & the labtop is about 80feet. can some 1 help me
 

A:Solved: Wireless Access Point & Wireless Router

7 more replies
Answer Match 53.34%

Belkin G wireless router 2.4ghz-802.11g
Dell Wireless 1390 WLAN mini-card

I am having an odd problem with the wireless capability of my wireless router. When I first got my router I used the Software included but that did not work so I set up my network manually. For several months everything was working perfectly and both physical and wireless connections to the router were working. Recently the wireless capability of the router has stopped working, however it still emits a strong signal and functions perfectly as a non-wireless router.

The problem my laptop encounter when it is try to connect is that the connection status constantly displays "Authenticating". I have tried to rebuild the network, no effect. Have clicked on the repair button, it sits indefinilty on the step "renewing IP address". I have tried physically entering my IP address, no effect. I am positive the problem is not my laptop wireless card because it still fuctions perfectly on all other networks.

Is this a networking problem or is it just time to get a new router?
 

A:Solved: Belkin G Wireless Router, Wireless Problems

Reset the router to factory default settings and reconfigure. Initially try to connect wirelessly with encryption disabled.
 

3 more replies
Answer Match 53.34%

I don't have access to the hardware right now, but the plan is to use a D-Link 301 wireless router as a repeater so that the laptop in the upstairs (3rd floor) bedroom can reach the netgear wireless modem/router that connects to the internet. (Ground floor)
Currently, the netgear wireless signal is detacted on the middle floor, but not on the upper floor of the house.
Is this possible?
Where might I find information on this?
I have tried Google, but have not had any luck finding the information I need.
 

A:Solved: Using a wireless router as a repeater for a wireless netowrk

8 more replies
Answer Match 53.34%

Here is my question, My roommate has a wireless network installed in the apartment we share. It is actually set up nicely, very rarely any problems getting on-line and browsing and such. The router is a Netgear WNDA 3700 and cable service is thru Comcast. I play a lot of on-line games and sometimes the connection will drop and I get a lot of lag and sometimes die (no fun). I was wondering if it is possible to run a Cat 5 cable from the back of the router straight to my computer, there is 1 connection available on the router, and If this is possible I want to make sure it won't interfere with him getting on the internet and doing whatever he does while I'm on-line. Thank you in advance for any help or suggestions.
 

A:Solved: Wireless and Wired connection thru Wireless Router

10 more replies
Answer Match 53.34%

I have installed a new LinkSys Broadband Router on my system. One end of my house is not getting a real strong signal. I have my previous LinkSys wireless Access Point (not a router, just an access point) that I was going to pack away, but was wondering if there is any way to connect it to the router, extend an Ethernet cable down into the weak end of the house, and boost the signal strength at that end. I can find nothing about daisy chaining these devices together in the LinkSys manual. Thanks.
Mickey
 

A:Solved: Can I Add A 2nd Wireless Acces Point to my Wireless Router?

Any access point can be hardwired into a currently wired network (just make sure its IP is unique) some Access points allow you to set it up as a repeater and it then would not even need a wire. But that is only on some of the newer access points and still sometimes does not work well with encryption.
 

3 more replies
Answer Match 53.34%

Just installed software and driver forWireless Laser Comfort Mouse - Product Number XA965AA#Abb When I go to the HP Mouse Control Center it says "No device found" All the basic functions of the mouse work, left / right clicks and scroll but i can not configure any of the other buttons. I've look up the support for this mouse on the hp site and it's was less than helpful, only gave me the chance to download a quick start up leaflet, very useful! Any help anyone?????????

A:Wireless Laser Comfort Mouse

Just purchased the same mouse, installed on HP PC running windows 7 as per instructions but am having same issue. Have you had any joy rectifying?

9 more replies
Answer Match 53.34%

My hp wirless laser comfort mouse scrolls horizontally and vertically but exhibits strange behavior. By strange I mean the pointer does not respond when it hovers over minimize, maximize or exit buttons on opened windows of applications. Also, when I remove it, this behavior persists in my laptop using its touchpad and so I have to reboot and omit the use of the comfort mouse entirely. What causes this?

More replies
Answer Match 53.34%

Several minutes, and sometimes less, after boot-up, the mouse becomes erratic, sometimes coming to a complete halt. Thinking it was either the interference of an outside signal or a build-up of static electricity, I have tried several things, including 1) rebooting, 2) disconnecting the power sources, 3) moving my external hard drive away from the mouse, 4) using different keypads to limit potential static build-up, 5) moving my entire system to a somewhat different location (fortunately, it's all on wheels) -- absolutely none of this works! Disconnecting the main power source and reconnecting it solves the problem sometimes, but only temporarily.

Has anyone had similar experiences? Its an MX™ Revolution

The world’s most advanced mouse.

Highlights: Cordless, Hyper-Fast Scrolling, Laser Sensor, MicroGear™ Scroll Wheel, One-Touch Search
 

A:Logitech Wireless Laser Mouse

6 more replies
Answer Match 53.34%

I have one around 6 moths old. Recently it started sticking. Not just where my wife spilt something on the keys (she said she didn't but, you know....) but also the spacebar, backspace keys too. I often have to hit them three times before they type.

Are these things safely cleanable? Or should I just dump it and get another (keyboard, that is ; not wife,. Mind you...........)

bob
 

More replies
Answer Match 53.34%

I believe I'm having some sort of signal problem with my wireless mouse. I play an online game in which you can hold down the right mouse button to look around. Occasionally it will get locked like that, and I have to click the button for it to fix itself.

I surmise that for whatever reason, I click and hold down the button, but when I release it, it is not registering that I have done so, so it just acts as if I am still holding the mouse button down. Clicking it once gets the signal sent that I have released it.

My friend reports having the same problem with his wireless mouse, yet far less frequently.

I've always had little annoying problems like this with wireless mice, and I'm beginning to think they are inferior in overall design to something much less complicated, like a wired mouse. Does anyone know what my problem might be?
 

A:Problems With Wireless Laser Mouse

Well, the connection between a wireless mouse and its receiver occasionally drops, sometimes for a millisecond or so, sometimes for longer. In your case... It'd seem a bit odd for it to only do that kind of errors.. Anyways, if you want to get rid of this problem, start by testing with a decent wired mouse... The wire is always there, whereas the wireless link isn't.
 

1 more replies
Answer Match 52.5%

Bought a Wireless desktop 7000 just after New Years Because I had issues with my Microsoft bluetooth desktop in Vista. I Had one hickup in windows 7 with this bluetooth set and found a driver updated and just had to roll it back and has been fine. So to avoid problems I went to regular wireless in the hopes to eliminate any issue. Well after using the new keyboard and mouse the mouse started to freeze and got progressively worse till it became unuseable. When it freezes the keyboard would stop as well but no disconect sound just freeze then come back. I figured bad desktop set so i put the bluetooth set back on and no problems. I put the other set on a laptop running XP and have been useing it without an issue all day so the set must be fine. I know My PC is way outdated but it actually runs 7 perfectly even with dreamscene on. My usb is the SiS 7001 controller and i've tried drivers new and old, switching ports, resyncing, new batteries, every power save option is off, still the same issue. Funny is that the bluetooth receiver requires 400mA of power and the regular wireless receiver says only 100mA, so it can't be a power issue. I'm lost, i got a brand new keyboard that i can't use. Any help is greatly appriciated.

A:Microsoft Wireless laser desktop 7000

Hello CuzzinChris, Welcome to the Forum.

If I understand your post correctly, there are 2 sets of wireless input devices involved here.

First you had a MS Bluetooth set. Then you replaced that with a MS wireless set. Is that correct?

If so, did you completely uninstall the old Bluetooth devices from the Device Manager before you disconnected them from the computer? This sounds a lot like conflicting drivers.

3 more replies
Answer Match 52.5%

Hi People, very simple question. Maybe I could get an answer to my question that I should had asked when I was buying. This wireless mouse uses two "AA" batteries or rechargeable batteries. Question: What about turning it off for the night or whenever I leave my computer? So that I don?t change them every two-three days. Thank you for your help with such a stupid question.

A:Microsoft Wireless Laser Mouse 5000

The mouse should go into a low power mode so it doesn't use that much battery power.

7 more replies
Answer Match 52.5%

New Years Greetings!
I have an HP Pavilion dv6000 (March 2007) with Vista.

I just installed the Natural Wireless Laser Mouse 6000...several times in fact!
First time it worked. Then after rebooting, it came up with a message with 3 choices:
- install driver (had already done that)
- don't ask again
- (I forget what this said)
So I said "don't ask again" and that's when the mouse went dead! Argh!
After uninstalling and installing from the disk TWICE, (pressing all the correct buttons on the transmitter and mouse and unconnecting the USB before this)
I finally downloaded the driver from online just in case it was the driver that came on the disc. It is Driver Version 6.20.173.0
Finally got it to work, HOURS LATER! but not on my mouse USB port which is the PS/2 Port that says IRQ 0x0000000C (12)

I had to move the USB connector to another port.
I spent [email protected]! trying to install and uninstall this and am coming to the conclusion that VISTA is the problem. Am I right?
I went to all the help features and did all the right things.
Device Manager says this new mouse is there. Says it is working properly.
But then nothing happened until I moved it to another port.
I would like to plug the USB into the normal mouse port. But it probably won't work. Why?
Am seriously considering a Mac for the first time since I started using a computer in 1980s! Thanks for any and all suggestions. Cheers!

A:Natural Wireless Laser Mouse 6000

use an adaptor
http://www.clickykeyboards.com/index...id/0/id/179740
http://www.tigerdirect.com/applicati...MP=OTC-BIZRATE

8 more replies
Answer Match 52.5%

Hoping this is a simple fix.....
the scrolling on my mouse is choppy, when I scroll an IE page it has like a delay? Its not a smooth scroll. I have been all over my manual and support for it and cannot find anything that will change this. The settings offer up slow-fast options but it only causes the page to flip faster or slower duh lol sorry I am at a loss as to how to describe this. Let me know if I can tell you anything that would be of help.
 

A:MFST wireless laser mouse 6000

No one familiar? I have been digging but cannot find a solution. This really seems to be a simple fix with-in the controls but there is not any option that corrects this. You scroll and the page moves with a delay and a line as if going page by page. I had first thought it was a setting within IE but it also does this in notebook and other software programs. Even sliding the sidebar vs. scroll is choppy. Any suggestion would be nice thank you.
 

1 more replies
Answer Match 52.5%

Hi

I am new to this forum and please forgive me if i didn't do something by the rules.
Here is my problem, i'll try to be as concise as possible.

Just yesterday i bought Wireless Keyboard/Mouse (laser) combo from Sweex (product code KB225US).

After two hrs of work the mouse pointer stopped responding. This happened after i rebooted my machine because of system freeze while playing with keyboard costumisation and copying files into the external HDD . I recall killing two or three processes, don't remember which one.
Receiver works ok on whichever USB port i put it into.
Mouse buttons work ok
Keyboard works ok
Pointer reacts (a little) only when exposed to direct light.
Batteries are new

Went back to the store this morning for replacement but it worked fine on their newer comps that were for sale. But same problem occurred with two older comps at work this evening.

My actions wereSwitched USB ports several times
Swithced off WiFi/ changed channel (to prevent interference)
Driver uninstall/reinstall several times (from CD/website)
Mouse uninstall/install (device manager)
Uninstall Wacom Intuos3 Ddriver

Nothing worked

I am willing to fight to the death for this mouse
Please help me. Should i go safe mode or registry or whatever? Just don't tell me to format, i have so many softwares installed. However, no other mouse software.

Specs:
WinXP Pro
Version 2002
SP2
AMD Athlon 64x2

Thanks in advance

More replies
Answer Match 52.5%

I am having problems with installing this mouse on Windows XP. I tried all the suggestions mentioned above by DAI and while the computer recognizes the new hardware, the mouse does not work.

My husband got it to work for a bit, but it stopped working again. Can anyone help me?

Thanks!

A:Natural Wireless Laser Mouse 6000

check the batteries are ok
reinstall the drivers
reset the mouse with on the mouse reset button on the bottom of the mouse and on the receiver

2 more replies
Answer Match 52.5%

Hi all,

Looking for the above at the best price possible (with consideration towards the toner costs too), colour would be nice but isn't essential as I'll probably buy a dedicated photo printer for these - would be REALLY handy if the recommendations included wireless options too...

I've spent what feels like days reading up on these on the Internet, and am even more confused that I was when I began

Thanks for any help
 

A:Recommendations for a Wireless Laser printer with Duplexing

Okay...

Since nobody has any suggestions, what about one that isn't wireless - would that help?
 

1 more replies
Answer Match 52.08%

im going 2 get a wireless router sometime this week, because i just got a laptop, when get a wireless router, probrably going 2 be a Linksys, do i have 2 get a Linksys wireless card? or could it be any kind of card? thanks.
 

A:Solved: wireless router, and wireless card

15 more replies
Answer Match 52.08%

Ok, I've got a Linksys WRK54G router, with firmware 1.55.04(may 2004) and I just recently got a new laptop that uses a wireless N adapter. It refuses to connect to the router. It sees the network, but can not verify. The computer can connect, I tested it on another, newer router, and the network is working, I tested it with my PSP and DS. But still, for some reason, I cannot connect. How do I fix this? Is it an update, and if so, how?

I'm also going to need to buy a new router soon, the one I'm currently using is being borrowed. If I get a Wireless N router, will all the Wireless G and B devices be able to connect to it? Any specific models that I should get? It does also need to be able to connect to a desktop via ethernet and needs at least 1 additional wired port, in addition to the desktop.
EDIT: It needs to be capable of port forwarding, preferably with support for wireless port forwarding.
 

A:Solved: Wireless N adapter to OLD wireless G router

Yep, any decent 802.11n router should allow 802.11g and 802.11b connections.

I have a D-Link DIR-615 that's worked well for me, and they're pretty inexpensive to boot.
 

3 more replies
Answer Match 52.08%

I have a DSL modem with wireless capability which I've had directly connected to a router via an RJ-45 connection. I'm looking to move my setup, but because of where items are placed in the room, I have to keep the DSL modem where it's at, and I'd rather not run wires around the room. If I pick up a wireless router that contains RJ-45 ports, would I be able to have it replace my original router and have the wireless router connect to the DSL modem (obviously through the wireless connection) and have that work like my current set up? Or am I missing something altogether and I need a different piece to pick up the wireless connection from my DSL modem and connect it to my router?

Thanks for the help.
 

A:Solved: Wireless DSL modem to Wireless Router?

13 more replies
Answer Match 52.08%

I have an Intellinet 802.11 G router, I bought a Linksys AE1000 N adapter. it says on the box that it is compatible with 802.11 A,B,G and N devices. The problem I have is the PC recognizes the default signal from the router and it says the adapter is functioning properly but they will not communicate. The computer connects fine with the ethernet cable. Is something set wrong? Thanks in advance

Windows XP Home - fresh install, no anti virus or spyware installed yet
Pentium D 2.80 Ghz
2 GB memory
 

A:Solved: Wireless N adapter to Wireless G router

16 more replies
Answer Match 52.08%

I am trying to connect to a wireless router downstairs with a wireless router upstairs all wirelessly

The upstairs desktop has no wireless capabity, must be wired via ethernet...this is why I am trying to do this.

some info both are netgear N600 wireless routers

Thanks in advance
 

A:Solved: Wireless router to Wireless router

6 more replies