Tech Problem Aggregator

Ethernet Switch

Q: Ethernet Switch

Ok so i am trying to get on xbox live at uni but it failed at ip adress so i bought a wireless router and tryed connecting that way and it worked for abit and then didnt

So i have took the router back i was just wondering if i buy a ethernet switch and plug the two ethernet cables in the one from my laptop and the one from my xbox and bridge the connections would the test still fail at ip adress or would it be ok?

Just thought i would ask on here before spending the money and having to take it back again

Thanks Ross

A: Ethernet Switch

7 more replies
Answer Match 60.9%

Hello,

I have an ethernet cable run in my house. What I need to figure out is if there is such thing an ethernet switch that does not require a power source. (or something that can get this situation resolved)

Here is my situation:
I have a cable ran to my basement, and have a bedroom directly above the basement that needs an ethernet run. It is not possible for me to run a completely new cable from the original starting point, so I was somehow hoping to use the cable going to the basement, put a head on it, put it into a switch/hub/splitter and run a cable out of it to the room directly above, and use the other cable coming out to stay in the basement.

Is there something that can do this for me? Is there a better way to do so? What would you suggest? Thanks!

UPDATE: Please refer to post #4 for more details.
 

A:Solved: Such thing as an Ethernet switch that doesn't need power? Question about ethernet run

15 more replies
Answer Match 52.92%

Another thought for changing my network for printer only sharing.

All things being equal, which hardware item will be better for printer sharing - Hub or Switch. I don't want to have to redo my cabling.

I understand a hub or switch will change the direction internally, so I don't have to buy any cross-over patch cables, but just plug each computer in to the hub or switch - right?

The other alternative is to buy a second cheap printer, but that entails cartridge additions at a later date.

Comments please. . .
 

A:Ethernet - Hub OR Switch!

8 more replies
Answer Match 52.92%

We have several computers on a network attached to a router. My son uses his PC and plays games on line using the Xbox. Everytime he wants to switch from one to the other, he has to pull the Ethernet cable out and put it in the other unit. He isn't close to the router so its impossible to set up two separate connections. Is there anything out there that would serve as an A-B switch where he can hook up the Ethernet line to the switch, then run another two shorter wires out to the PC and Xbox. It would be nice for him to be able to go back and fourth without having to crawl behind the Xbox and attach.
 

A:A-B Switch for Ethernet

10 more replies
Answer Match 52.92%

Can someone tell me: can I add an ethernet switch to an ethernet switch?

I've just bought a 4 port model.
I've qucikly realised I need more ports!

Can I just buy another ethernet switch and extend?

Thanks.
OM
 

A:Can I add an ethernet switch to an ethernet switch?

11 more replies
Answer Match 52.92%

Got an odd one for you, but someone might have run across it.

In addition to software security devices when accessing the Internet, I use hardware security as well. Since being disconnected from the Internet is the best possible security, I use an RJ-45 coupler in the Ethernet cable between my computer and the cable modem, keeping one or other side of the cable disconnected except when I'm actually using the Internet (downloading mail, etc.)

This is quite convenient, but the Ethernet connectors invariably break after 100 or so connect/disconnect cycles, and the cable segment has to be replaced.

The best solution, if anyone has ever seen or heard of one, would be an on/off switch designed to link two RJ-45 Ethernet cables. Not as good would be a little two-port Ethernet "hubby", such as used to be available for a while 10 or 12 years ago, with its own power supply; I could then use an ordinary 120V AC on/off switch to control the Internet connection by powering the hubby up and down. But I can no longer find any of these hubbies.

Any info on either of these devices, or suggestions of better alternative methods, would be much appreciated. Thanks.
 

A:Ethernet On/Off Switch

9 more replies
Answer Match 52.5%

I have a Hp pavilion a1130n running on windows xp. I have been trying to switch to ethernet from usb for the internet. I am using charter internet and I called them but they were no help. I can't get it to work can somebody help me?
 

A:switch from usb to ethernet problem

7 more replies
Answer Match 52.5%

hey guys i have a quick question bout a situation i have going on. the computer i am now on is hooked up into the internet via a wall ethernet jack, which is hooked into an ethernet switch (or hub i think) in another room where the cable modem is located. the tv that i play my xbox 360 on is a good 10 feet away or so, and i want to get connected onto xbox live from there.

i have an ethernet cable that is long enough to run from the xbox itself to the wall ethernet jack that the computer is hooked into.

what my question is is that if i buy another ethernet switch and hook it into the wall jack, and then from that switch run another ethernet line into the computer which is literally right on top of the jack and then another line from that switch into the xbox 10 feet away, if this will work since the wall jack itself is hooked into another ethernet switch in another room.

i can kinda guess that was kinda annoying to follow but i just wanted to explain everything to avoid confusion. help would be really appreciated . thanks guys
 

A:ethernet switch question

im not sure if theres a difference between a hub and a switch, but i do know that the wall jack is hooked into an 8 port linksys ethernet switch. if that helps at all
 

4 more replies
Answer Match 52.5%

ok. here's the deal. i have 2 notebooks. and a dsl internet connection. i recently bought a switch so as to connect both laptops to the internet simultaneously. but it doesn't seem to work. i checked the other threads and the comments posted for similiar problems that others have.but the solutions don't seem to work for me.
i can only connect one notebook at a time. if i connect the other, usually a "ip conflict" balloon pops up. so HELP!
 

A:ip conflict with ethernet switch

Because you have residential service which will only give you one single public IP. By putting in a switch, you are causing both laptops to request an IP via DHCP. Frankly, I'm surprised you're even getting both laptops to get an IP from the DHCP server. You need a router which does NATing to allow simultaneous network connectivity for both laptops not a switch.
 

2 more replies
Answer Match 52.5%

Can we connect Power over Ethernet (PoE) Adapter just like this one D-Link Power over Ethernet (PoE) Adapter Kit with any Ethernet switch ? I have a Belkin 5-port 10/100 switch can it be powered by PoE ?

How it will be setup.

A:Can I use Power over Ethernet (PoE) with any switch ?

If you are asking if you can connect this device to a NON-PoE switch and then have PoE on the switch the answer is no. If you are asking if you can connect this device to a switch and make one port PoE on the switch the answers is no. The D-Link device is PoE only on the D-Link device. I hope that helps.

If you need PoE on a switch you need to buy a PoE switch the electronics inside the switch are different. However, you can plug NON-PoE devices into a PoE switch without problems. -WS

4 more replies
Answer Match 52.5%

I am designing a test system that has three 8-bit ethernet microcontrollers http://www.rabbitsemiconductor.com/products/rcm4200 connected through FPGAs to some non-standard serial buses transmitting and receiving 16-bit serial data at 1Mbps clock, at some data rate (maybe up to 500 messages/sec each). A PC connected to the ethernet switch will send commands to the three microcontrollers, and will process the data they send. The PC is a Core 2 Duo at tbd speed with tbd RAM, and software to talk via ethernet will be an .exe compiled from C++ source code. Based on years of experience I think the PC can keep up, but I don't know about the ethernet switch.

I don't think a $50 5-port Linksys or D-Link home switch is going to handle this, it needs to buffer data so messages don't get lost. I don't need a router or DHCP server, just a decent switch.

Any ideas? This is for work so money is no object (but would like to keep it under $2000).
 

A:Ethernet Switch Recommendation?

6 more replies
Answer Match 52.5%

As a security device I have an RJ45 coupler in the cable between my computer and internet modem, and I only couple the two cable segments when I need to be online. Needless to say eventually the cable connector breaks and I have to replace the cable segment. I could really use a simple inexpensive inline on/off switch to replace the coupler between the two cable segments, but can't find such a thing. Can anyone help? Thks.
 

A:Need Ethernet Inline Switch

For inexpensive you could disable the ethernet connection (in Network Connections) or use a firewall.

Next time you buy a modem look for one with a Standby button; all Motorola cable modems seem to have one.
 

2 more replies
Answer Match 52.5%

Question:

Hello. Do I need an Ethernet hub, switch, or even a router to have my Ethernet VOIP telephony box to be hardwired "separately" from my cable modem and NOT be part of my hardwired wireless router's ports???

My Objective/My Plan:

This is for home/residential networking. To have two (2) hardwired networking hardware items: 1. (1) VOIP box... ...and... 2. (1) wireless integrated router BOTH hardwired off of the same cable modem of my cable ISP. I need either a hub, a switch, or even a router to connect both networking hardware items to the cable modem. Also, I MUST BE ABLE to connect to the Internet at the same time for both the VOIP box and the wireless integrated router (the Internet) if necessary. My current wireless integrated router will serve as my wired/wireless networking device for a desktop computer, a laptop, an Internet streaming radio, and a Wi-Fi Smartphone; but the wireless router *WILL NOT* serve my VOIP telephony service. Why? See: "Reason".

For your information, the VOIP box offers an incoming Internet connectivity, an outgoing traditional telephone jack, and a power port for a power adapter. No Internet bypass Ethernet port on the VOIP box.

Also, be aware that my cable ISP company is NOT the same as my VOIP company. This does not make much different on the networking hardware setup. The cable modem itself has ONLY one (1) Ethernet connection too.


[*NOTE: I have learned that a two-way Ethernet "splitter"... Read more

A:Do I need an Ethernet hub, switch, or even a router to have my...?

  
Quote: Originally Posted by montecarlo1987



Questions to answer please:

1. What do you think I need? Do I need an Ethernet hub, switch, or even a router to have my Ethernet VOIP telephony box to be hardwired "separately" from my cable modem and NOT be part of my hardwired wireless router's ports?

2. Will an Ethernet hub or switch support more than one networking hardware to connect onto the Internet simultaneously or at the same time or not? (I am not familiar with Ethernet hubs' and switches' properties.)

3. Another router a "fair" idea or do you not agree at all for an integrated router to serve as a hub or switch? Will I have networking issues if I incorporate another router into this setup? Can it be "tamed" to not cause issues?

4. Do you have any suggestions, different ideas, or thoughts here?

Thank you!


1. You could complete this in two different ways however it is dependent on what the current router is for your main internet connection to client computers. One way is to connect a separate router to one of your main routers LAN ports. for example connecting the internet port to the LAN port. Then all you need to do is add the VoIP clients to the added router and it will be completely separate from your computers due to a technology called NAT.

Second option which could be cheaper is to get a managed switch (NEVER GET A HUB THEY EQUAL NETWORK DEATH) and then setup som... Read more

9 more replies
Answer Match 52.5%

I like to think I have never been beaten (reformat the system will fix it but thats to easy)DesktopVista Home EditionGigabyte series Mother BoardI have a user who has cleaned out his system rebooted and ever since then the system wont connect to the internet. Ethernet symbol bottom right hand corner with red cross.Steps I have taken to resolve this.Ran repair and diagnose, error "either driver or Hardware issue"Uninstalled driver and reinstalled lastest driver.Device Manager, uninstalled ethernet card reinstalled, disabled re-enabled. when disabled ethernet symbol should disappear but doesnt.Installed another ethernet switch still nothing.Ran Combo fix, malware bytes (found websearch) nothing major.Went through Hi Jack This filesChecked my internet connection lolAm wondering if there maybe something in BIOS however?Has anyone come across this before? I dont think it's the mother board.

A:Ethernet switch not working

I have a user who has cleaned out his system What does that mean?

4 more replies
Answer Match 52.5%

Could use a little bit of help on this one...the guy at BB talked circles around my head when i asked how to set this up.....i have a DLink EBR2310 router that is currently all used up by 3 PCs and the XBox....i wanted to add the one lone printer to it so the kids can use it off of their pcs.....everything is hard wired to the router.....Question ...How do i hook up this Dynex 5 Port Ethernet Switch to the Router and where do all the cables go in what order???? again the guy at Best Buy talked circles around me.....Thanks all
 

A:Adding Ethernet Switch

You would disconnect one ot the PCs from the router. Then connect an ethernet patch cable between the disconnected port on the router to a port on the Dynex switch. Then plug the PC into the switch. If the printer is a networked printer, also plug it into the switch.
 

3 more replies
Answer Match 52.5%

Hi All,

I have a laptop (Lenovo Thinkpad) that is mounted in a docking station. In my house I have wifi, the docking station is connected to the router via hard LAN.

I have prioritized my connections to give preference to LAN over wifi (as I obviously prefer the fastest connection).



The Network sharing center now tells me I am connected to both LAN and Wifi, but the system tray tells me Wifi. How do I know through which I am now connected and how to I prioritize LAN? Please don't tell me to manually enable / disable ;-)



Thanks a lot!

M

A:How to switch between wifi and ethernet

Try ipconfig and see what your lan ip is
and then try
pathping 8.8.8.8
and if it goes threw you lan card ip first you will know it's working the way you want

1 more replies
Answer Match 52.5%

Hello,

Will be using two desktop PC's in house for the first time now.

Have always had a hard wired Ethernet cable between Router output and the one desktop pc.

New PC coming with, apparently, some "wireless" capability.

a. Can one of the PC's be connected to the Router wirelessly (and the other thru the Ethernet cable) ?

If so, where are the Settings to do it, and how would I go about it ?

b. Or, is it better to try and set up a GigaBit "Switch", and have both PC's use it ?
Would this be better than one PC wireless, and one PC thru the Ethernet cable ?
Why ? Any caveats or gotchas doing it this way ?

Thanks,
Bob

More replies
Answer Match 52.5%

Hi,

For some time now I have had the set-up outlined below (sorry for the granularity but as I don't know what the problem is I
thought it best to highlight all my connected devices).

Back room
================
- cable broadband router (operating in modem only mode)
- own wireless router connected to modem
- NAS connected to router wireless router
- Desktop connected to wireless router
- 500Mb passthrough Homeplug adaptor connected to router
- 5 port Gigabit ethernet switch( Tenda G1005D) connected to router
- Printer connected to switch
- Virgin Media TiVo connected to switch

Lounge
=================
- 500Mb passthrough Homeplug adaptor
- 8 port Gigabit ethernet switch (D-link go-sw-8g) connected to Homeplug adaptor
- HTPC (for XBMC) connected to switch
- TV connected to switch
- AV reciever connected to switch
- VM Tivo connected to switch

This set-up has worked fine with me receiving good wired and wireless connections throughout the house
However yesterday my wired downstream speed dropped dramatically in the lounge to the point where streaming video to my
XBMC box was impossible and even performing a LAN speed test proved difficult.

This morning I have ran several tests on the connection in the lounge and I have determined,buy plugging the cable from the
adaptor straight into my laptop, that the connection from the Homeplug adaptor in the lounge is good in that both a LAN
test and an internet speed test show the connection is capable of at least 90Mb...s... Read more

More replies
Answer Match 51.66%

Hi there,

I currently have a powerline extender/adapter in my lounge which supports two ethernet cables (one into my Sky box and the other into my TV), it's been working fine but now I have an additional device (my pc) which I want to run from this adapter.

I've been told an ethernet switch is the way to go, I've also been told that a splitter is an option. I've read some negative comments on the latter and wanted to gain some informed opinion. As I understand it I could buy a switch and connect this from one of the ports in the adapter, then run the three ethernets from this. Would this work ok?

cheers

More replies
Answer Match 51.66%

Hi. Does anybody explain to me the correct way to ground a 8p metal ethernet switch that is powered with a bipolar AC adapter?
Thanks!
 

A:grounding a metal ethernet switch

How old is this equipment that it does not have internal grounding on the IEC jack?
 

1 more replies
Answer Match 51.66%

I am having a problem with an ethernet switch that is locking up, trying to find the root cause.

The switch is a 16 port, 10/100Mbps, Linksys model EZXS16W. I have three computers connected to it:
Computer "A" is a Windows XP Pro machine running a FTPD server (Guild FTPD).
Computers "B" and "C" are CPU boards in an avionics box, both running VxWorks.

When the avionics box powers up, computers "B" and "C" attempt to communicate with computer "A", both using port 5000. After a few seconds computer "A" reports an error that it is unable to communicate with computer "B".

At this point I tried to ping computers "B" and "C" using computer "A" (ping fails), And tried pinging all three using a fourth computer connected to the switch (also fails). I concluded the switch is locked up. Power cycling the switch restores operation until it locks up again.

I tried two other identical EZSX16W switches (same revision, same firmware) with multiple avionics boxes:
Two of the three switches always lock up when used with the first avionics box.
None of the switches lock up when used with other avionics boxes.
Two D-Link switches do not lock up when used with any avionics box.
None of the switches lock up since I updated software in the first avionics box.
All of the above results are the same if I use another computer "A".

OK, so I solved the problem (updated software in t... Read more

A:Solved: Ethernet Switch Lockup

I'm not familiar with that switch. But if the customer wants to know why, you would have to do some more exhaustive troubleshooting. The first step is to look at the switch port the problem avionics box is plugged in to. You need a switch that can give you detailed information on what is happening on that switch port. Whether the connection is dropping out of full duplex, if there are collisions, runts, giants, CRC errors, etc, etc. To get that type of information you're looking at fully managed switch. If those don't give you any clues, you'll then have to either connect a hub in line or port mirror that port so you can do packet captures with a sniffer.
 

3 more replies
Answer Match 51.66%

I use a cable internet connection. My previous modem had a "standby" switch, so whenever I left the computer I would set the modem to standby, to prevent hackers from having access.

I just got a new modem (internet and telephone) that has to remain on at all times in order for the phones to work. For now, I've activated my EZ firewall, which I haven't used in the past because it would cause some problems with some apps. But I'd rather just be able to turn the internet access on and off as needed.

Does anyone know if there's such a thing as a manual on/off switch for an RJ45 cable? Seems to me like a rather simple concept.

Thanks to all who reply.
 

A:Is there a MANUAL SWITCH for an ethernet cable?

8 more replies
Answer Match 51.66%

Currently I have internet connection via cable modem and usb connection to the modem.

I am trying to connect by using ethernet from modem to computer but although the adapter is enabled, I have a red cross through its symbol (xp) and an windows tells me that the network cable is unplugged although I can see that physically it is not.

Help welcomed.
 

A:switch to ethernet internet connection

16 more replies
Answer Match 51.66%

hi, can anyone tell me the easiest way to create a network between multiple pcs using switch. We have 3 pcs . Currently i m using vista x32 ultimate. Other one also uses vista ultimate x32 and third one is laptop using xp sp1.

plz tell me how to connect them all into network enabling them all to share files and internet access making my vista computer a server.

I have a internet connection in 1 computer (the one that I am using) and I also have a Ethernet switch. I have all the cable ready too. I had to connect them before also but got no success.

I hope some one here might help.

More replies
Answer Match 51.66%

I have a long ethernet cable running to my bedroom from the router? can I put a switch on the end of this and then run 2 ethernet cables from the switch to my sky box and android box?
 

A:can I use a switch to spilt ethernet connection?

Yes.
 

1 more replies
Answer Match 51.66%

i'm trying to connect my two computers to each other using the ethernet switch i already have to connect them to the internet. i've looked all over but i can't find a relevant guide/tutorial.

A:two computer network with ethernet switch

Is it a switch, or a router?

3 more replies
Answer Match 51.66%

I have a curious issue, so I figured I'd see if someone can fix a problem for me for a change.

I recently upgraded to a 35/35 Internet connection. When I connect my computer directly to the router, I get the full bandwidth on a test at www.speedtest.net. However, whenever I use any of my gigabit switches between the computer and the Actiontec MI424WR router, I get much more leisurely upstream connections.

This seems to be some sort of issue with the cheap SOHO switch being throttled by the 100mbit port on the router. Obviously, the gigabit port on my computer seems to be smarter than the gigabit switch ports.

It seems clear that I probably have to replace the switch with a better model, but I don't want to buy a more expensive switch without knowing that it's really going to solve the handshake issue.

Any suggestions or ideas on how to beat this into submission would be appreciated.

Here's the results I'm seeing.
Using SOHO gigabit switch between computer and router (D-Link and Trendnet models tested with identical results);


Direct connection to router.
 

A:Solved: Ethernet Switch Issue

11 more replies
Answer Match 51.66%

I've set up two routers (one a primary router and the second as an access point to extend my wifi). They are currently in the same room connected together a by 1 metre cable and everything is working fine.
However, I need to move the second router upstairs and trying to replicate the connection between the two routers. The house is wired with network points and cables which all feed into a 24 Port Planet 10/100Mbps Ethernet Switch.
I've located the wall socket/ethernet port number (No. 6) from which the primary room is located and connected and similar the second router in the upstairs room (No. 2).
As its going into an ethernet switch, I thought that should automatic connect routers on the network. However, when I try to access the second router (via WIFI), its not connecting to the internet which is likely because the two routers are no longer connected.
I tested the two sockets (No. 6 and No. 2) with one of those cable testers and I did get a signal on both ends, so not sure what is going on. To my mind, the routers should be connected.
Can anyone help?

A:Connect 2 routers via Ethernet Switch

From your description it should work.
Go back to step one with two routers connected by the 1M cable and double check you get a wifi connection to the internet.
Plug Primary router into wall socket and secondary router into other end of cable, before the switch - check connection.
Recconect switch and plug secondary router to switch with 1M cable - check connection.
Reconnect switch and try secondary router in desired location - check connection.
A bit of hassle but will identify where the connection is failing.

1 more replies
Answer Match 51.66%

Say I need to shut off internet access in my home to prevent my teen from having the temptation to play multiplayer games at all hours. I'm thinking that I could insert a timer switch in the ethernet cable that would disable one or two of the wires in the CAT-5 cable, rendering internet access inoperable. At 6 AM, when we need the internet up, the switch would restore the connection with no fuss (i.e. rebooting of routers, laptops, wi-fi routers, etc.). I need it to operate without daily intervention on my part; the internet goes off at midnight, comes back at 6AM. Ideally, it would deal with DST on its own too. Is there anything out there like that? If not, can you tell me which wire, or wires, in the CAT-5 cable will kill all data throughput if it is cut, and resume throughput seamlessly if it is restored?
 

A:Ethernet on/off curfew timed switch help

i suspect that could be easily overcome or am i missing something

Whats the make and model of the router - some have QoS which may also enable you to turn off internet access at set times to certain PCs or ALL
that would also be part of the router and if you set the password - can not be logged into , unless reset and you maybe able to set that up to

A teen would be able to overcome quite a few things with a little help from the net

is this on a games consule or on a PC - you maybe able to install parental controls onto the PC
 

2 more replies
Answer Match 51.66%

Hi All,

This is driving me crazy at the minute, so I thought I would throw it out to the experts to try and get my sanity back! Here goes...

I have Sky BB (dlink router) and I have been successfully using 4 comtrend homeplugs to share my connection to a spiderbox, sky HD box and HP officejet network printer. I recently had my electricity supplier changing a meter and after he went I found that 2 of the homeplugs had fried - I know they're temperamental so I took it on the chin.

Anyway I have now decided to go a different route and I purchased a Vonets wifi bridge, which works well. My question is this - I have an old Netgear DG834G router and I would like to use this as a network switch so that I can plug my bridge into one of the ethernet ports and draw off from 2 of the other 3 ports to feed my printer and Sky HD box.

I plugged the vonets into port 1 and then a cable to both my printer and my sky box and nothing - then I went into my netgears homepage and disabled DHCP, and hey presto I got a connection on my sky box. I assumed that was that until I tried to print and the printer was not available. I have tried loads of things since - static IP on the printer (I usually have it static anyway as my work laptop doesn't like it otherwise), manually configuring the network on my sky box, changing some of the settings in my netgear router but I cannot get it working. I tried changing the IP adresses on both my printer and sky box to the same as the vonets, ... Read more

More replies
Answer Match 51.66%

I wonder if someone can answer a question for me,I have a TV downstairs connected to a homeplug which in turn connects to my router located upstairs via another homeplug. What I would like to do is get another ethernet connection (in other words have 2 or more ethernet sockets available)from the downstairs home plug,would a hub or switch (not sure which?) be the answer or would the only way be to add another homeplug downstairs? Hope this make sense, many thanks in advance RG
 

A:Solved: Hub or switch to split ethernet?

6 more replies
Answer Match 51.66%

Hi,
I run an Ethernet cable to my modem for my Windows 10 PC. But unfortunately I have a lot of drop outs where the internet just stops (something I am taking up with my provider) and I have a pocket wifi to use as a back up.

My PC can find the wifi and connect but the only way I can get it to connect is by pulling out the blue Ethernet cable from the actual pc. (When I say connect, I mean it is "connected" already but not in use, the small box appears for the ethernet cable rather than the wifi icon)

I would like to know if there is a way to either run the wifi simultaneously with the Ethernet cable plugged in or if there is a way to "turn off" the Ethernet connection from my pc when it goes down, so that I dont have to keep unplugging it.

I am not very technically minded and am worried if I go into advanced network settings etc that I might not be able to get the Ethernet working again once it is plugged in and back up and running.

Any advice would be appreciated, thanks.

A:How can I switch to WIFI from Ethernet instantly??

You can have both plugged in and still work. Each NIC is assigned a metric and the NIC with the lowest metric will be used. If in your are the wired NIC is still seen as available but in fact it's having problems the computer will still try and use it unless you unplug the cable. If your computer supports a feature called LAN/WLAN switching that may work in your case that may work or may suffer from the same problem in which the wired NIC is still detected as connected and it won't switch. If you are only having an issue with the wired connection why not just stay on wireless?

8 more replies
Answer Match 51.66%

hi, Iím goi9ng to get a blu ray player for my room and in order to use the blu ray live part of it i need to connect it to the internet. currently in my room i have a pc and an xbox 360 and just change over the Ethernet lead when i want to use one or the other, but now i would like a more permanent solution so that i donít have to change over the lead if i want to watch a blu ray disc, go on my xbox 360 or pc. my question is will something like this do the trick?

http://www.play.com/PC/PCs/4-/33090...roductReviews.html?_SortType=4&go.x=13&go.y=8

if so does anyone know if this will decrease the signal strength that the Ethernet cable carries, as i would still need to be able to play games over xbox live.

thanks for the help

Billy
 

A:Solved: Ethernet Network Switch?

6 more replies
Answer Match 51.24%

I'm having a problem connecting my Nashutec printer / photcopier to my computer. All was well until I changed to Talk Talk and went wireless for my internet connection.
Previously I connected to the internet via an adsl modem card in my pc but I took this card out and have a wireless connection to a Dlink wireless router. This works OK.
However to install the modem on the pc I had to use an ethernet cable to connect first time. I have only one ethernet plug in the pc connecting to the Intel Pro/100 connection. After the router was set up and I plugged the cable back in for the printer I couldn't connect to it. I get a message saying limited or no connectivity. When I click repair it says it can't because it can't find the IP address.
I'm running XP SP2 Pentium R 240GHz processor with 540MB ram
The autoconfig IP adress I get for the network connection is 169.254.168.233
The lights are on the Ethernet switch box and the cables seem to be OK as the lights flash at both ends.
has anybody got any suggestions as to how I can get my connection back?
Thanks
 

A:Problem connecting printer via ethernet switch

Which modem did you get?
Talk Talk's help page is here:
http://broadband.talktalk.co.uk/help/questions/TEC_01_26
 

5 more replies
Answer Match 51.24%

i have a router/ modem that has been able to share my internet connection between 4 computers. but i want to increase this number so i got an Netcomm np2005 switch. but now the networks dont seem to interact and the internet does not work on the computers connected to the switch. is it possible to do this or do i need something else to extend my internet sharing>?
thanks
 

A:Router And Ethernet Switch Internet SHaring

ok then yea i seem to meet all the requirements except it cannot detect an ip address on the pcs connected through the switch. and the net still doesnt work when i configure the ip manually? does anyone know what i could do?
thanks
 

8 more replies
Answer Match 51.24%

Hi, Im having a ACT Broadband internet connection, he provides internet connection through a wire which runs into my room that can be directly connected to the my computers NIC. Whenever i switch on my computer and opens the browser it first redirects to the page - http://portal.acttv.in/, where it asks for Username & Password, our ISP gives us a IP Address which displays on the web page after logging in. I want the internet connection to be shared with my roommates so i bought a 8 port Ethernet switch (http://www.intexuae.com/SWITCH-8-PORT.htm), which is having a uplink port also. I have connected the wire given by the ISP to the up link port of the switch & i connected my PC to one port of the switch with another network cable. I also connected my friends PC to second port of switch with another network cable, my problem is that when i sign into my ISP web page and start using the internet & my friend also wants internet in his PC & when he opens the browser the ISP's webpage is appearing and when he sign's in internet is disconnecting in my Pc. I tried to change the IP but as a default IP is given by the ISP if change the IP internet is not working. Please provide me a solution.
Here r my Ethernet Switch pictures -
http://www.freeimagehosting.net/yq375
http://www.freeimagehosting.net/4dgnb
http://www.freeimagehosting.net/7jiwn
http://www.freeimagehosting.net/erc8d
 

A:How to share Internet connection using ethernet switch ?

I dont think you need to open your ISPs webpage on your second PC, just configure the network settings and put the gateway IP. If that doesn't work, use Windows ICS (Internet Connection Sharing) and configure it using the Network Configuration wizard. See how it goes. What is the windows version you are using ?
 

3 more replies
Answer Match 51.24%

I have an RJ45 cable run from my router to my component cabinet in the living room. The modem hooks into the router and then I have the four connections on it going out to two computers, a wireless router and of course the one connection to the component cabinet. I had a networked DVD player hooked to that RJ45 to access my computer's hard drive, but now I need to put an IR receiver in their so I can control my computer with my Universal Remote:

http://www.home-electro.com/

The question is do I need a router or will just a switch like this

http://www.newegg.com/Product/Product.asp?Item=N82E16817180002

work? I was thnking the switch is all I need since the router is necessary only for sharing an Internet connection, correct? What's the difference?
 

A:Do I need a router or Ethernet Switch to expand Network

16 more replies
Answer Match 50.82%

Hey, all. For a couple years now, I have been using a 5 -port Linksys Etherfast switch to hook a Panasonic blu ray player & DishNetwork Box to the internet via my home network. I had the switch plugged into a gaming adapter. Worked fine, until I had to replace my router. Was using a Linksys WRT54G router and the switch & router communicated flawlessly.. didn't even have to set it up manually when I first added the switch. Did all this to avoid dropping more wires into my back bedroom.

I upgraded to Cisco (Linksys) E3000 Gigabit router, and the switch will not "talk" to the new router. DHCP's enabled, and both the bluray player & Dish box tried to autoconnect using DHCP.. no dice. Tried several hard resets on all devices mentioned above, even firmware update on the new router. No dice.

So here's my question : do you think it's just an incompatibility question? If I buy an Gigabit ethernet switch, do you think that will fix the communication problem?

I was thinking if you go gibabit to gigabit.. It might be more compatible. I wanted some expert opinions though, before I go dropping another $30-40 on a new switch.

I read about creating ethernet bridges using DD-WRT firmware, but it seems daunting. I am not a complete noob, but it seemed beyond what I wanted to bite off.

Thanks in advance you guys & gals!
 

A:Solved: Question about using Using an Ethernet Switch with my new Gigabit Router

7 more replies
Answer Match 50.82%

i recently built a third computer for my network, added a cable modem, and got what i thought was an unbelievable deal on a linksys ethernet switch (ezxs44 4 port)..... free.
now for the problem: i have an ericsson pipe rider cable modem, 3 linksys lne100tx nic cards, and the ethernet switch. i've treid to connect my machines and the modem through the switch the same way i connected the 2 computers before(pc to pc with cat 5 cable), it didnt work and it locked my system.
basiclly i am asking for somone to tell/show me how to hook everything up so it functions correctly, i've tried to no avail (ive reset all the configurations for the nic card in my main machine and am only running it with the modem (the original windows/roadrunner software configuration). do i have to change the cat 5 wiring diagram?, what seetings should i use on the nic cards?, and what do i do with the cable modem settings.

let me know what you come up with(i'm getting desperate, .................my girlfreind...........MY computer)
thanks again
 

A:linksys ezxs44 ethernet switch with cable modem

I would think one of your cables is wrong.

check the ends of the cables, make sure the same wire colors are going to the same pins, sounds like you have a crossover cable going from modem to switch.
 

3 more replies
Answer Match 50.82%

Anyone know of a good 16 port gigabit switch? Il'd perfer managed but I can live with unmanaged. I want to know pros and cons of any one that is stated and why? We're upgrading a few of our sites and we have old 10/100's unmanaged that are coming out I was thiking about replacing with the same netgear brand were removing but I wanted to do a little homework before deciding.
 

A:Whats your htought - Gigabit ethernet switch 16 port.

7 more replies
Answer Match 50.82%

I have this major issue with my MSN messenger (on my PC) whenever I connect it to a ethernet switch so I could use it (my PC) with my Laptop, so together both have internet connection.. my MSN messenger works fine and it could sign in easily, but when I disconnect my ethernet switch and connect to just my modem, my MSN messenger says it could not connect to the internet or that there's no internet connection where there is! (I forgot which error code but its well known, I've searched before and it said it could be the anti-virus etc but I have no problems with my anti-virus and programs it monitors). Anyone know how to stop this stupid silly error with Live Messenger?
 

A:Live Messenger works when I connect it to a Ethernet switch?

Can you ping google.com once you use the modem? You might not be authenticating to the WWW properly and Msn is blinded with connectivity by the modem being unable to do so.
 

8 more replies
Answer Match 50.82%

Hi all,

I was wondering how an Ethernet switch forwards packets of network information. Does it send the packets to all outputs? If so, is it like a hub? Does it know where computers are and only send the packets to the right place? If so how would it know where the computers are?

I've been wondering about this for some time but haven't been able to find the answer.
 

A:Question: How intelligently does an Ethernet switch forward packets?

A switch manages a database of MAC addresses it uses for routing packets.
 

2 more replies
Answer Match 50.82%

Because of the way my house is set up i have to have an Ethernet switch by my cable modem and then my wireless router is run off of that via a 50 foot ethernet cable. My printer is plugged into the ethernet switch along with my desktop (these are in the basement the router is in the center of the house). My desktop has no problem using the network to print but my laptop will not recognize the printer because it cant find the ip address through the switch. Is there a way to set this up or is my setup not going to work?

A:Sharing files and printers through ethernet switch and router

Hello,

How is your network setup, Homegroup or Workgroup networking? If you have assigned a static IP to the printer you may manually assigned this IP address when adding the printer from your laptop.
This Tutorial has different options on adding a network printer from your computer.

Please let us know if it works or not.

2 more replies
Answer Match 50.82%

I recently purchased a NAS Drive which works ok. However I have also found out that my Sky Hub only supports <100Mbps.

The problems I have is when copying to the NAS drive I only get write speeds of around 10-12MBps which sounds about right being around 1/8 of the 100Mbps. Also when I stream I get a lot of buffering/cut out with any HD content streaming to my Xbox 360.

I just wanted to know if unplugging everything from the router and into a gigabit Ethernet switch then connecting that to the router will speed everything up? Or would I be better off going all out on a pricey router?

Basically am I right in thinking the switch will bypass the router for anything not using the internet?
 

A:Solved: Will adding an Ethernet switch speed up my network?

9 more replies
Answer Match 50.82%

Good afternoon,

I have a networking question.

Can I plug a 5 port Ethernet switch to my DSL modem, connect 2 PCs to the switch, run a cable from the switch to the far end of my house, connect a Wireless n router for WIFI access for my laptop/iPhone and connect another PC, one BluRay player and a couple DirectTV DVRs to the wireless router? Please see attached diagram.

Your help will be greatly appreciated.

Kind regards,

 

A:Solved: Ethernet Switch/WiFi Router Connectivity

12 more replies
Answer Match 50.82%

Hello everybody, I am in some distress, and would greatly appreciate your help

Here is my set up
Alright so my laptop and PCs (a) and (b) have the access to the internet. however my router sees only these three devices connected, as if my ethernet switch was not connected to the router. My problem is that the switch seems to work sometimes. Vonage is apparently having issues with the network setup so it doesn't work, same with my PS3, however the PC hooked up to the switch as well, sometime has internet and sometimes it doesn't. When it does have internet, Windows Xp pops out saying that there is an IP conflict with another PC on the network and then the connection is out. Any ideas of what is screwing up on my network? Any help would be greatly appriciated.

PS the ethernet switch is made by company Airlink
the modem is made by RCA
and the router is made by Linksys if that helps
 

A:Solved: ethernet switch possibly not recognized by my router

The exact make/model of the modem, router, and switch would be real useful here.

What you seem to be describing is a flaky switch or cable, not much can affect a simple switch in that manner.

As far as the duplicate IP addresses on the network, that could well be a different issue.

Turn off everything on the network, ALL the machines and any other network device like network printers and NAS drives.
Turn off the router and modem.
Turn on the modem, wait for a steady data light.
Turn on the router, wait two minutes.
Turn on the network devices and computers, one at a time.

This issue is usually caused by resetting a router without resetting all the network connected devices.

Another issue that will cause duplicate IP addresses is assigning static IP addresses to devices that conflict with the router's DHCP address range. If you require static IP addressed devices on the network, they should be configured to be in the same subnet but outside the address range defined for the DHCP server.
 

3 more replies
Answer Match 49.56%

Hi all i recently turned my second router into an Ethernet switch so that i could port forward a game. I am wondering if this will slow down my internet speed.

Thanks in advance
 

A:Will a router turned to a ethernet switch slow down internet speed for gaming?

Hello glaucun,

Technically speaking, yes. You've added another "hop" for the packets to have to travel to and from.

But it's not to any degree that you will notice.
 

3 more replies
Answer Match 49.56%

hello,
As my PC will be moved upstairs soon where there is no way to get a ethernet cable any more,
I will be forced to go wireless...
I have never wanted it and never used it except on my mothers laptop witch is obviously built-in.
So my experience with wireless stuff is very low...

some fact that may play a role for your comments:
-from PC to modem/router threw the walls will be about 8 yards max.
-there is a chimney in the direct path from PC to modem/router.
-there is barely any metals used in the house although the modem is placed next to the water-main.
-the laptop of my mother never had any issues and is about 2 years old cant tell you the what hardware it used ATM.

Now what I want:
-I want my 6.4 MB/sec speed (other wireless devices dont play any role > mom laptop (80% facebook and 5% mails and 5% searching the web and the rest is youtube lol ; and the smart TV really doesn't do anything except for streaming some video clips very rarely.

- I NEVER want to get disconnected!! not even for a millisecond if you catch my drift.

- I prefer an internal piece of hardware witch I have a PCI slot for with the room. Although I would also like to be able to give internet to multiple PC's or whatever , ya never know ; LAN party for example...
i do realize a switch would suffice but I'll just give you everything because I know there are many ways to go wireless. just dont know crap about them...

- I'm not a millionaire but I dont buy crap so keep that in... Read more

A:Solved: Help! need to switch from ethernet cable to wireless connection to modem/rout

11 more replies
Answer Match 49.14%

Hi All,

Getting a strange error with Hyper-V on Windows 8 Pro x64.

When I try and add a virtual switch I get:

Error Applying Virtual Switch Properties Changes
Failed while adding virtual Ethernet switch connections.
Ethernet port '{a bunch of stuff}' bind failed: The data is invalid.
(0x8007000D).

There doesn't seem to be much on google that relates to this (in particular the bind failed: the data is invalid part).

Anyone have a clue what the cause might be?

Cheers

A:Hyper-V Error Adding Virtual Switch - Ethernet Port Bind Failed

can be many thing, in 3 or 4 years that I'm using Hyper-V I never encounter it, you need some networking knowledge to play with virtual switch, but usually 0x8007000D error are due to files corruption or permissions, try to run hyper-v management as admin.

7 more replies
Answer Match 45.78%

I have gotten blue screen of death and i'm just trying to find things that could be wrong. i stumbled across this unknown file in my device manager, and it is saying unknown and not allowing me to update the driver, Hoping anyone can help. I use a Belkin wireless router, but i have my internet through an Ethernet cord into my computer.
Thank you.

More replies
Answer Match 45.78%

Inserting Ethernet Cord Does Not "Automatically" switch connection to ethernet.

This is the trouble I have to go through whenever I insert my ethernet cord:
I have to go to network and sharing center

Then I have to click change adapter settings

Finally, I have to disable wireless network access for direct connection.

I am wondering if there is some type of setting that I can check for on my

Windows 7 OS to automatically enable the described function I want (which

should already be enabled, unfortunately it is not).
Not that these details really matter, but I have an Alienware m14xr2, but...
OS Name Microsoft Windows 7 Ultimate

6.1.7601 pack 1 build 7601

BIOS Version/Date Alienware A09, 6/29/2012

Installed physical memory (ram I assume) says 12gb, with 9.44gb available, which is strange because I have 16gb of ram!

Available Virtual Memory 21.1gb

System Type x64-based PC
Thank You for the help in the future!
Regards,
Sean

A:Inserting Ethernet Cord Does Not "Automatically" switch connection....

Hi Sean, if you do this Wireless Setting.pdf before powering on your pc, it will work.

2 more replies
Answer Match 39.48%

Need to no if I have this right

they have a dsl modem going to a Linksys router to a 24 port switch then to a little 4 port switch. sure, so then Would it be modem to router then router to any port on the big switch or is there an uplink port on the big switch it should go to? then you would hook a cat5e from one of the regular ports on the 24 port switch and run it to the uplink port on the 4 port switch need to no if the whole sequence is right. Hope someone can help, john will told me the cable would go from the big switch to the uplink on the small switch but I am wondering if I have it all right or not and wonderiing about from the router to the 24 port switch does the cable just go in a regular port in the big switch or if there is an uplink port does it go there. Hope you can understand my rambleing here. Thanks (please don't send me to a link) just need to no modem to router to regular port or uplink port on 24 port switch then from regular port on 24 port switch to uplink port on the 4 port switch. Thanks
 

A:Solved: Windows xp hookup question for modem, router, switch, to switch?

Router to uplink port on 24 port switch, and then normal port on the 24 port switch to uplink port on the second 4 port switch. An auto-MDX port on a device negates the need to worry about uplink ports for that particular cable connection.
 

3 more replies
Answer Match 39.48%

I have Windows 7 Professional on my PC. In the first load I had, the PC should automatically detect if the LAN cable was plugged in, turn off the wireless radio, and change the network icon in the right bottom corner to reflect the cable was now in use.
Unfortunately, I had to reload my PC, and since then I can't get it to do it again.
So, what I'd like to achieve is this: Have Windows automatically detect when the cable is plugged in, turn of the wireless radio, and change the network icon in the right bottom corner to reflect the cable is in use - and, obviously, vice versa.
Can someone tell me what I need to do, please?

A:Have Windows 7 automatically switch to LAN when cable is plugged in and switch to wireless when it's removed

Hi,
There are two methods can help you.
1. Go to <Network and Sharing><Change Adapter Settings> and right click your wired and wireless adapters one at a time to change the properties. Select IPv4, click <Properties>
then click <Advanced>. For each one, clear the "Automatic metric" check box and assign the metric value manually. Setting your wired adapter?s metric value lower than wireless adapter one, such as ?1? for wired adapter and ?2? for wired adapter.

2. Go to <Network and Sharing><Change Adapter Settings>,
hold down 'alt' to bring up the "File" menu, select "Advanced", select
"Advanced Settings" from the dropdown menu, adjust the priority of your wired adapter higher than your wireless adapter in the "Advanced Settings" window under the "Adapters and Bindings" tab.
Hope this helps.Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

3 more replies
Answer Match 39.48%

Am a new Networking BEE I had built a small network of 20 systems at my office and there I had connected a switch and router.

All the switch ports have been covered by all the systems and one port is given to the router
switch(20)----router(LAN)
|
|
|
HUB(8ports)

And also I connected a HUB to the switch ..

It works fine for my internet connections to all the systems but how do i make authentication of passwords and username to my network systems from one server which I use server 2003 at one system

let me know the detailed step by step procedure to build.........

I would feel very happy If at all any Suggestions for me to make my Business grow.....

As early as possible ................

Thanks in Advance

Smiles....[][]
 

A:Connection of Router to Switch and also a Hub to Switch - N/W systems internet share

>>I use server 2003 at one system

you need to enable Network Login, but that requires that win2003 have

a domain controller
a DHCP service
and a DNS service.
the Domain Controller is just another name for LDAP and it becomes the control point
for all systems.

get some books on Configuring Win2003 Server
 

4 more replies
Answer Match 39.48%

I have a wireless router connected to my modem, and ALL PC's connect to that for internet.

I also have a gigabit switch I use to transfer data in between several of the machines. I do it quite often and I don't want it eating up the wifi bandwidth.
I have done it before, but it has been a long time and I cannot remember how I forced internet traffic over the wifi and local traffic through the switch
Is the only way to do it to specifically tell Windows to use the IP address of the LAN connection? I know it will work that way, forcing local traffic directly to that IP, but I seem to remember there being an easier way to do this.

Thanks.
 

More replies
Answer Match 39.06%

Is it possible to switch off a laptop screen - laptop runs Windows 7 - and prevent it being switched on again, without inputting a password?

I need to keep the laptop running, therefore I can't put it to sleep and logging-off has become a pain.

I've tried the Power Options, but the display comes on again when the mouse is nudged.

I've also tried "Fn + F6" on my Acer laptop, which switches off the screen, but an accidental key press brings it to life again.

Any ingenious little prog around? None I've seen have that crucial password privacy aspect.

A:How to switch off laptop screen & password protect switch on again?

a password is is used when you are out but if you are home you don't need a password.. unless you don't trust somebody...

3 more replies
Answer Match 39.06%

One question I need to know

If you go from DSL modem to Router then Router to switch
my question is then
If I wanted to hook another mini linksys switch into the bigger switch would you run the cat5e cable from the first switch to a reg port in the second switch or would you run it to the uplink port and then hook the 1 or 2 computers into the reg ports of the second switch.??
 

A:Solved: Windows xp-question of hookup switch to switch?

Obviously, run it to the uplink port if available.
 

3 more replies
Answer Match 39.06%

hi all,

system gets hang, pc configuration is intel 865bgf motherboard with PIV 3ghz ht processor with 80 gb samsung hdd and 266 mb ddr i reinstalled the operating system (xp pro) changed smps and changed 256 ddr but the problem still continues, when the system gets hang i am not able to use my keyboard or mouse i have to restart the system , please help me and also i have to know weather is this the hardware issue or the software issue, and also i am facing same problem with same configuration with the other customer pc .
warm regards,
pradeep
 

A:system gets hang (it freezes) only option is to switch off and switch on

12 more replies
Answer Match 39.06%

Hi everyone, I searched through the forums but couldn't really find what I was looking for.

Currently we have a DHCP server set up to a switch, that has a special line connecting to a switch in our shop which is just across our back lot, giving network access to the few computers over there. They recently put in a new machine that needs network access, but they have already accidentally cut two ethernet cords. I'm looking to provide a wireless solution for the machine, but I don't want to have to spend a few thousand dollars on a large wireless switch.

Can I plug a wireless router into the switch in our shop, and essentially turn it into a wireless bridge, or is there another, simpler way to do this?

If this has already been answered, sorry for missing it!

Thanks!
 

A:Solved: DHCP Server -> Switch -> Switch -> Wireless

While you could use a router, or even configure the router to act as an access point, why not just buy a true access point? They start at $27: http://www.newegg.com/Store/SubCate...ame=Wireless-AP-Bridges-Repeaters&Order=PRICE
 

2 more replies
Answer Match 38.22%

I thought that I had this all figured out, but my dad just asked me a question about my setup, and I can't answer it.

The setup is like this:
[ip-phones + computers]-->[small switch]-->[managed L2 switch]-->[router]-->[modem]

I have several ip-phones and computers grouped into blocks of 8. Each set of 8 is a medley of phones/computers connected to a small switch http://www.linksys.com/servlet/Sate...nksys/Common/VisitorWrapper&lid=3681322279B34

Each of these switches, in turn, will be connected to a managed L2 switch http://www1.ca.dell.com/content/products/productdetails.aspx/pwcnt_3448p?c=ca&cs=calca1&l=en&s=biz that will create 2 VLANS: One VLAN will contain all of the phones, and the other will contain all of the computers. In turn, each VLAN will have its own router and DSL modem, thereby separating the network traffic.

I know that I can use this L2 switch to make the VLANS based on the MAC addresses of the devices. However, the smaller switches do not support 802.1q [VLANs]. Will it be a problem that the smaller switches do not support VLANs? Essentially, will this setup work to split up network traffic?

Thanks once again,
-Roger
 

A:Computer, switch, switch, router, modem

I have the same DELL switch for my phones. You PoE will not carry across the linksys switches, so that is the first problem.
Next are the computers attached to the phones? Or does each device get its own drop?

And whats this about 2 routers and modems? Thats a bit over kill!! QoS would do the trick.

I would run all the devices off the Dell and attach the computers to the Phones (most IP Phones have a passthrough port) Configure the Dell with trunk ports with the Computer VLAN passing untagged traffic making it the native VLAN. While having the phones on a Tagged VLAN(If you phones conig allows you to set the VLAN in its config great! If not you can bind the MAC to the VLAN). The you create a QoS policy giving the VoIP traffic priority!
 

3 more replies
Answer Match 38.22%

Hi, guys. I have connected Huawei switch S5700-24TP-SI-AC with Cisco switch 2960 using one single fiber with LX SFP. The port is up on one side (Blinking on Huawei side) and down on Cisco side...Please help.
 

A:Huawei switch vs Cisco switch, How to connect

What kind of 2960 switch do you have? Have you checked the interface to verify the switch recognizes the optic and all the stats report back as normal? Are you using a Cisco branded optic? Do you see light being shot out from the optic in the 2960?
 

2 more replies
Answer Match 38.22%

Can any one advised me

I want to implement network on 6 Floor , 12-12 Port on each portion in one floor, total 24 ports on each floor keeping in mind distance between the each floors how do i connect them with fiber cable (which fiber cable i required) so speed remain constant for all floors.

How is my Idea to implement...right from server room in 1 floor where all internet connection providing to each floor. Cascading from 1 to 2 , 2 to 3, 3 to 4, 4 to 5, 5 to 6. UPon this setup...do i get into a low speed bandwith comparing to 1 floor Network. Does Network Gets slow by connecting through Cat5 UTP cable in cascading example.

Please adviced me.

-Thank Q>
Shiraz
 

A:How Can i Connect Gigabyte Switch to Gitabyte Switch

15 more replies
Answer Match 38.22%

i have this sr224 switch and i like to connect it to my giga network sr2024 switch.
now, i plug a utp belden cat5e to port 1 of sr224 and the other end to port 1 of sr2024.
what i got is the whole panel lights of sr224 will blink very fast.
is this normal? or sr224 and sr2024 cannot be paired?

thanks in advance guys
 

More replies
Answer Match 38.22%

Hi Everyone.....
So, I just got Wireless Broadband hooked up in my business. I hooked the LAN to the Router and then hooked up a 16 port gigabit switch. I have three terminals coming out of it (in the bcak of the building) as well as a line running to the front of the building. At the front of the building I have the line going into another 16 port gigabit switch. I have 4 computer terminals coming out of that switch. I AM getting internet at the back of the building .....but nothing at any of the terminals after the second switch (front of the building). Can someone help?

Thanks!
 

A:Router to Switch to Switch.....No Internet at end terminals

7 more replies
Answer Match 38.22%

Hello,

I use windows 7.
When I turn on laptop (acer Aspire 5742) cannot connect to internet until I switch user and log in again. Soon as I touch any browser icon the rest of computer stops responding as well. It's only me on computer. Have virgin media security/ spyware/ virus protection. Tried CCleaner. After I switch user everything is fine.
Additional info; On 16th October had great difficulty getting my emails from Yahoo. Sometimes sign-in box appeared without my security signature and different style of writing for browser remembered log-on details.

Cheers,

Gordon.
 

A:Solved: have to switch user to continue after switch on

11 more replies
Answer Match 37.8%

I have a kindle Fire HD 7" I want to know if I can hook it up to the internet through my laptop. I am abroad, wifi is hard to find and the kindle has a free texting app that's awesome. I only have ethernet in my dorm, no wifi. Can I make this work somehow?

Thanks!
 

A:Kindle fire HD 7" Ethernet capable though Laptop/USB or ethernet cord?

Get a wireless router.
 

3 more replies
Answer Match 37.38%

I've had trouble connecting to my own internet and have no wireless. I'm using my neighbor's wireless and it's really slowing her's down.

I've tried restarting my laptop (it usually works) and then reinstalled the device under "device manager". It's not the cord, I've checked with my neighbor's laptop and it works fine.

I use a Sony Vaio VGN-NS140E with Windows Vista SP2. I'm not sure what other information to give.

Any suggestions welcome!

------------------------------------------------------------------------
{ipconfig /all} This is while I only have an ethernet plugged in and no wifi connection.
Windows IP Configuration

Host Name . . . . . . . . . . . . : FairyHo
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
Physical Address. . . . . . . . . : 00-21-5D-E2-19-50
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller
Physical Address. . . . . . . .... Read more

A:Solved: Ethernet Port doesn't recognize ANY ethernet cord

9 more replies
Answer Match 36.96%

So a couples of days ago my computer lost connection a few times, but it got back up running without any problems, yesterday however I had huge problems browsing trough the internet and had problems connecting to pages several times, but downloading worked just fine, but today I'm not able to do anything, it keeps disconnecting and reconnecting, but when its connected the connection is so bad that I can't access a single site.
I know it must be something wrong with my computer, because I've tested two different cables in two different ports, and I know one of the cables must work since I have no problems connecting to the internet on my Xbox 360, and all the other computers in the house have no internet problems what so ever, including the wireless connection on my laptop, and I also run into the same connection problem even in safe mode.
I noticed that the light on my ethernet port is solid orange, but usually it is green, and I've tried to do a virus scan to check if that might be the problem, but I doubt it since I haven't accessed any pages I don't usually visit in a while and it didn't find any viruses.
I have had some problems with the ethernet port before, but nothing that was permanent, I have experienced that my computer has had connection problems while everyone else in the house have had no problems, but after waiting a bit it suddenly reconnects and has worked just fine for many many months, and I've only experienced this pr... Read more

A:I think my ethernet port is broken, might need internet/ethernet card.

16 more replies
Answer Match 36.96%

Hi, i have a AIO B50-30 and I'm trying to connect via the hdmi input socket my TV satellite box. I have found out recently that there is a switch on the side of the unit that will allow you to switch to the input channels so allowing viewing of the box and other like units Xbox etc. My issue is that I'm pressing the switch but nothing is happening it's simply staying on my desktop on Windows 10. Can anyone please help to see if I'm doing this right or am I missing something ?.  Any help, suggestions would be gratefully received since there is very little on the subject in connection with this particular model .thanks in advance.

More replies
Answer Match 36.96%

Hello all

I just installed 4GB ram on my 32 vista and it only recognized 3GB in the os (vista 32) and all 4GB in the bios. so I decided to use the /3GB Switch, by using that command in bcdedit, it all worked good. The problem is now I have 3069 mb physical memory and ONLY 209 mb Kernal Memory!!! so I used the "bcdedit /deletevalue IncreaseUserVa" and bcedit said it worked successfuly so i restart my pc and it STILL had the same memory! so right now im stuck with only 209 mb Kernal memory! any ideas on how to fix this? I looked all over google and found nothing. Should I keep these settings or try and fix it?how do i fix it?
 

A:3GB switch will not switch back, vista 32!

I am not too familiar with those commands you speak of, but I do have a question: Is the video card built into the motherboard? If so, what amount of system memory is being shared with it? Besides that, I have no more ideas to offer you. Sorry
 

3 more replies
Answer Match 36.96%

We are moving to a new office location. The guys who will be setting our network is proposing the following equipment:

1. 3Com 24-port 10/100 mbps switch
2. 24-port Patch panel
3. 6u data cabinet
4. 1u cable management

The new office will be a 2-floor building with around 40 computers. I asked some of my friends who are more expert on network setup and told me typical switch (Linksys, Cisco) will do if we need to save some money.

What do you think? Thanks a lot!
 

A:Is 3Com 24-switch necessary or typical switch will do?

Well, first off, I'd be specifying a gigabit switch for expandability, I can't see investing in a 10/100 switch in 2010! If you don't need a managed switch, or need to save money initially, and unmanaged switch will probably be significantly cheaper.

In point of fact, if you want to go really cheap, you can get away for less than $100!

http://www.newegg.com/Product/Produ...igabit switch&bop=And&Order=PRICE&PageSize=20
 

3 more replies
Answer Match 36.96%

I understand that a hub is more like a party line, where all devices hear and read data before sending it to next port, and a switch is advanced hub. But, what is a router. I know what a wireless router is, but they say a router is more advanced than a switch. Can you buy a non-wireless router?

Also, can you connect 2 switches together? So, Modem-----to Switch----to Switch----Computer

And both switches have other devices connected?

A:Hub vs Switch vs Router/ 2 Switch Story

you CAN buy a non-wireless router--but--the two I found on Amazon were only 10/100 (most modern systems use gigabit ethernet 10/100/1000) but wired are generally cheaper than a wireless router(the Cisco below is NOT cheap)--however--it's not necessary to use the wireless part of the wireless router as most have at least 4 ports (wired).

Yes you can connect switches together but they won't allow for multiple computers to connect to the Internet (at least not easily nor in a way that makes sense).

What devices are you trying to connect together?

wired routers:
Amazon.com: TRENDnet 4-Port Broadband Router TW100-S4W1CA (Black): Electronics

Amazon.com: Cisco-Linksys EtherFast Cable/DSL Router with 4-Port 10/100 Switch: Electronics

4 more replies
Answer Match 36.96%

hi

im connectiong a switch to a switch, what connection do i use straight or cross.


thanks
 

A:switch to switch straight or cross

standard rj45 cables
 

5 more replies
Answer Match 36.54%

Been having issue for more than a year. When my provider (Charter cable with static ip) drops my internet connection I have to start "at the wall" meaning reboot cable modem then wireless router then reboot laptop to reconnect to internet. Takes 1/2 hour. Charter seems to be dropping internet more and more so this can happen once per week or sometimes every day or 3. Have narrowed it down to this. With internet working just fine. Can use wireless from phone to surf web. Can even enable wireless adapter on laptop and connect to internet via wireless. So internet is not the issue. I very seldom use wireless and instead use my ethernet connection. I keep wireless adapter disabled. Very simply, internet is working. I am using ethernet connection. All is good. Simply unplug ethernet cable from laptop then reconnect ethernet cable. I have no internet until I reboot my laptop. Reboot works fine but getting tired of having to do so every time Charter drops my internet. John

More replies
Answer Match 36.54%

Hi there,

I have a desktop with Windows XP (SP2 32-bit) and a Dell Laptop with Windows 7 (64-bit). Both have one Network Interface card each. Desktop's NIC is connected to a cable modem for internet. I wish to run internet on both the systems, for that I bought a USB-to-ETHERNET connector and an ethernet cable, so that I could connect USB end to the desktop and the other end (with ethernet cable) to my lappy, and could be able to share internet connection. The USB-to-ETHERNET connector came with an installation cd which I have installed already and I have setup the whole connection but unable to share the internet connection. May be there is some configuration problem or so.. Internet is running fine on desktop. Please help...
Thanks in advance..!!!

PS- I am able to connect both the systems by connecting ethernet cable to both NICs.
 

A:networking using USB-to-ETHERNET connector and an ethernet cable

Upgrade the XP to SP3.

Then show for both systems ...

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

1 more replies
Answer Match 36.54%

My ethernet port has been not been working for a few months. I go to my networks and there is no ethernet adapter listed...only a wireless adapter. Also, it does not show up in device manager. I reinstalled the driver and then restarted my computer. My ethernet port worked for a little bit, but when I used my computer the next day it did not work, and the ethernet adapter was no longer in device manager. Anyone know what's up?
 

A:Ethernet port won't recognize ethernet cable

6 more replies
Answer Match 36.54%

Hello,

I've searched the forum and could not find an answer to this problem.

I have a Windows 7 Enterprise machine where at the login screen the "Switch User" button is missing and so I am unable to clear the last user.

Just about all the results I got back on this topic was how to re-enable the "Switch User". This doesn't help because I can't login to make the change.

TIA!

More replies
Answer Match 35.7%

I am about to add 3 new servers into an existing network, which is currently all on 1gbps ethernet. All of the new servers are SSD-based and to me it makes sense to go with 10gbps coming out of the servers into a switch, and then 1gbps out to the workstations.

The new server location is about 200 feet from the existing networking equipment/old server location, so using Cat 6A/Cat 7 copper would be REALLY nice/economical.

Where I am hitting a jam is any 48 port gigabit + 4 10gbps switch is $$$.

I am trying to find a small 10gbps copper switch, say an 8 port, that is expandable, and compatible with a 48 port 1gbps switch. Does such a thing exist?
 

More replies
Answer Match 35.28%

I have a router/modem combi but got a Netgear WGR614v6 off ebay which needs an ethernet modem.
2 questions:
1. Could I have say a 50 metre Ethernet cable between the ADSL ethernet modem and the WAN port on the router?
2. If so, would any modem work with a netgear WGR614v6?

Thanks
Jack
 

A:Ethernet modem max ethernet length

6 more replies
Answer Match 35.28%

Are you guys aware of a single pci card that offers the typical ethernet connection as well as a wireless one? I'd like to have the option to connect to either and I don't want to get two seperate cards. Any info is appreciated, Thanks
 

A:10/100 Ethernet/Wireless Ethernet PCI combo

I don't think you can do that but I would go wireless. :bounce:
 

1 more replies
Answer Match 35.28%

Sorry I'm a newbie. Please could someone tell me if any ethernet port can fit in any Ethernet slot.
I'm thinking of getting the Cat6a Ethernet but Idk if it will fit in my router and my pc.
Thank you.

More replies
Answer Match 35.28%

Control panel lists "HP EN1207D-TX PCI fast ethernet adaptor" installed but my machine has no ethernet card--only a phone modem card (working fine). I need ethernet for DSL. I thought "adaptor" meant "card." What's up? Thanks.
 

A:ethernet adapter but no ethernet card?

6 more replies
Answer Match 35.28%

How can I ping point to point, or ethernet to ethernet when there is no IP address assigned? Is that possible? I tried using a MAC address with Ping but that did not work. In this case its a PC to a ethernet to 100BaseF (fiber) conversion and I want to send pings to test the link (no other routers or switches involved, just point to point). Any insight appreciated
 

A:How Ping Ethernet to Ethernet when no IP address?

Nope, PING is a OSI level three function, it doesn't work for MAC addresses.
 

1 more replies
Answer Match 34.86%

Good Evening
hope someone can help

i have a netgear router dg834gt and netgear switch gs608

2 computers connected direct to router work fine (using vista!)

yet 4 computers through switch have no internet access!! (using xp)

switch is connected via Cat5E cable to router
have tried everything i can think, with exceptions of upgrading firmware!

any help would be greatly recieved! (am having to make do with dongle!)

Cheers
 

A:Solved: no internet through switch (Netgear router Netgear switch)

13 more replies
Answer Match 34.02%

I just bought a netgear Cable/DSL router with an 8 port switch built in. I am currently still at school, so there is no need for the router, but I want to use the hardware as a switch. I am confused as to how to set this up.

The router I have is a Netgear RO318.

I know very little about setting up networks, but I assumed it would be the same as just switching out the hub. Boy was I wrong. I switched them out and it doesn't work like I thought it would. Any suggestions would be great. Thanks all.
 

A:Using router/switch as just a switch

Actually, at this very second I am trying to figure out that exact same thing! I will definately help you out if and when i get it figured out.
 

7 more replies
Answer Match 34.02%

Hello ,

When I ran Windows 98, I was constantly rebooting and always switched the whole system off at the end of the day.

What are the pros and cons of leaving Windows 2000 on indefinitely?
Also, will this affect the wear of my monitor? Should that be switched off separately and the system left running?

Win2K is certainly very much more stable than 98, and hasn't crashed since I had it installed.

Pentium III
Win 2K
480 MB RAM
550 cpu

(I am looking to upgrade motherboard and videa card, etc. as soon as funds are available.)

Thanks for any thoughts you may have.

<img src="http://forums.techguy.org/attachment.php?s=&postid=647323">

<img src="http://forums.techguy.org/attachment.php?s=&postid=644719">
 

A:To Switch off Computer, or not Switch off?

6 more replies
Answer Match 34.02%

I am in the process of setting up a pretty extensive gigabit network in my home. I have the new D-Link DIR-655 Pre-N Router with four gigabit ports and I am using all four to run to 8-port D-Link unmanaged switches in four locations. The first location is right next to the router. I have a fifth location. I searched hard for an 8-port wired gigabit router. If I had found one (at a reasonable price) I would use it as the base in from the modem then use the D-Link for wireless only (no routing). Alas ... I was unable to find one and so I am wondering if there are any issues running from a switch to another switch.
 

A:Router to switch to switch?

Only issue is a slight impariment in speed as it passes thru two switches and the router . . You may not be able to decerne it.
 

3 more replies
Answer Match 34.02%

Hi - I am having to extend my network and want to use 2 switches. Current one is a Belkin 5 port 10/100. Now thinking of buying the:

Belkin 8 port 10/100 (F5D5513Iuk8) or
Netgear 8 port 10/100 (FS608) or
Netgear Prosafe 8 port 10/100 (FS108).

Which is the best one to get (I realise the Netgear Prosafe is normally more expensive but I can get it at the same price as the Belkin)?

Could anybody also advise if the second switch will provide as much speed (bandwidth, I think) to the PCs it supplies (3) as the first one which will be linked to my router and 3 PCs and a couple of printers. I would really appreciate any advice you can give - I have spent ages Googling this question and am still not clear.

Many thanks
 

A:Solved: Switch to Switch

10 more replies
Answer Match 34.02%

Hi all,

Just wondering if I can connect a switch to a switch? so my network would look like this

Router ---- Switch ---- Switch - - - - computer connected wirelessly

primary reason for doing this is i want to bring the wireless router closer to the middle of my house... some areas are getting really weak signals..

Sincerely,
networkingNoob
 

A:Switch to Switch Connection?

You could do that, but why not just get a longer network cable? Ethernet on Cat-5e is good up to 100m.
 

2 more replies
Answer Match 34.02%

Would like to get some opinions on this. I have a Dell N3000 switch and a Cisco 2901 router. Somebody recommend to me to consolidate the two devices and let the N3000 switch and route. My question is, is there are performance increase? What is the downfall of bundling the two devices? What is the upside?
 

A:L3 switch VS. Router and switch

6 more replies
Answer Match 34.02%

Hello. I currently have a home network as follows.

3 PC's connected to router.
router connected to cable modem.

I would like to increase the througput on my LAN (amongst the 3 pc's) so I'm thinking about adding a switch such that it would be [3pc's->switch->router-cable modem]. I was wondering whether adding the switch would actually improve the LAN thoroughput or is this just adding unnecessarily repetetive. I am aware of the "7 layers of the osi model" of networking but am wondering whether switches and routers work on the same layers. Im assuming NO because router bases routing based on IP address while switch will deal with the MAC addresses (am i correct???). Since a switch will perform less inspections on the packets (IP filtering, SPI, etc..) am I going to get better results when adding the switch??

BTW, my router: SMC2804WBR
Switch i might add: Gigafast Mini Switch EZ500-S
 

A:To switch or not to switch? That is the question.

Your router has a 100Mbit switch in it so unless you are getting a gigabit switch and your PCs have gigabit interfaces you will get no significant boost in network speed.

You may get a small speed inrease if you buy a good 100Mbit switch - the ones integrated in home routers tend to be the bottom of the barrel type - this will give you some extra under very high loads.

What is a "good" switch? You would want something with crossbar fabric and/or cut-through packet forwarding (those are expensive).
 

1 more replies