Tech Problem Aggregator

Weird restrictions and event id 1030

Q: Weird restrictions and event id 1030

Hi, I hope someone out there can shed a little light on this situation as it's doing my nut in!

We have a network with 3 Windows 2003 servers and workstations all with XP. When the users log in a script runs which maps network drives and pushes printer connections etc. Also we have several group policies set which restrict pupils and staff in certain ways. Nothing drastic though. Just 'Cant see certain Control Pannel Items etc'.

Now all was working perfectly until a couple of weeks ago 2 staff members came to me and said "I can't get on the interenet or e-mail". I had a look and when they logged in on their normal computer it seemed to log in fine but then receieved a couple of "Cannot perform this action due to restrictions on effect on this computer" messages. This message also appears when they try to click on the Internet for example. On closer inspection it has run the scripts ok because I have the shared drives and printers. But the virus scanner which is sophos in our case hasn't loaded (it comes down from the server), also there is no All Programs in the start menu, or shut down.

If I log off and check the event viewer I have event 1030 there which refers to an error with group policy.

Now the most annoying problem is it appears completly random with it's timing. Usually a shut down and restart of the computer fixes it. Moving to another computer can also fix it. It dosent always do it on the same computers, other peolpe can log on to the problem computer fine, and they can most times!

I have been down the refresh the users profile router to no avail.

Has anyonoe got any ideas?

Any would be greatly receieved.

Paula

More replies
Answer Match 92.1%

Hi, I hope someone out there can shed a little light on this situation as it's doing my nut in!

We have a network with 3 Windows 2003 servers and workstations all with XP. When the users log in a script runs which maps network drives and pushes printer connections etc. Also we have several group policies set which restrict pupils and staff in certain ways. Nothing drastic though. Just 'Cant see certain Control Pannel Items etc'.

Now all was working perfectly until a couple of weeks ago 2 staff members came to me and said "I can't get on the interenet or e-mail". I had a look and when they logged in on their normal computer it seemed to log in fine but then receieved a couple of "Cannot perform this action due to restrictions on effect on this computer" messages. This message also appears when they try to click on the Internet for example. On closer inspection it has run the scripts ok because I have the shared drives and printers. But the virus scanner which is sophos in our case hasn't loaded (it comes down from the server), also there is no All Programs in the start menu, or shut down.

If I log off and check the event viewer I have event 1030 there which refers to an error with group policy.

Now the most annoying problem is it appears completly random with it's timing. Usually a shut down and restart of the computer fixes it. Moving to another computer can also fix it. It dosent always do it on the same computers, other peolpe can log on to ... Read more

More replies
Answer Match 68.88%

These event just started appearing a day or two ago, but they continue to repeat every 5 minutes:

Event 1030:
Windows cannot query for the list of Group Policy objects. Check the event log for possible messages previously logged by the policy engine that describes the reason for this.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Event 1058:
Windows cannot access the file gpt.ini for GPO CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=bbpi-pdc,DC=billsblue,DC=com. The file must be present at the location <\\bbpi-pdc.billsblue.com\sysvol\bbpi-pdc.billsblue.com\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini>. (Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator. ). Group Policy processing aborted.
They occur exactly every five minutes, and always in this order. I searched for the gpt.ini file it's looking for and found it.

I don't really have any group policies in place, just basic users and computers. Nothing fancy. And I'm afraid I don't quite understand AD enough to just 'experiment' until I make these error go away.

Any ideas and/or guidance would be welcome.... thanks
 

A:Event 1030 & 1058, repeating. Guidance?

One possibility:
As per Microsoft: "This behavior may occur if the following conditions are true: your Windows XP-based computer is a member of a domain, and the Microsoft Distributed File System (DFS) client is turned off (disabled). To resolve this issue, turn on (enable) the DFS client". See M314494 to find out how to do this. Also check M810907 for a hotfix.

Other possibilities:
http://www.eventid.net/display.asp?eventid=1030&eventno=1542&source=Userenv&phase=1
 

3 more replies
Answer Match 68.46%

Hi!!

I get an error message on 2 machines in my domain.

domain: 3 windows 2003 servers.
1 server: DC
2/3 servers: on this I get the error. the both servers are set as member servers.
how I can fix the error on the both machines?

Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1030
Date: 22.09.2003
Time: 10:13:48
User: GICIOLAND\gicio
Computer: JAMESBROWN
Description:
Windows cannot query for the list of Group Policy objects. Check the event log for possible messages previously logged by the policy engine that describes the reason for this.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

regards,
gicio
 

More replies
Answer Match 68.46%

I am running a Vista x 64 client with a SBS2003 server. There are now real critical issues, but there are some logon and logoff anomalies.

I consistently receive events 1030 and 40961 at Logon. I will post details in subsequent entries.

Also, Logoff usually takes a very long time (like more than 15 minutes).

A:Event ID 1030 and 40961 at Logon, Slow Logoff

Example event 40961:

The Security System could not establish a secured connection with the server LDAP/sbsserv.Dimond.local/[email protected] No authentication protocol was available.

- System

- Provider

[ Name] LsaSrv

- EventID 40961

[ Qualifiers] 32768

Level 3

Task 3

Keywords 0x80000000000000

- TimeCreated

[ SystemTime] 2010-10-27T23:19:24.000Z

EventRecordID 156192

Channel System

Computer IPS-091.Dimond.local

Security


- EventData

LDAP/sbsserv.Dimond.local/[email protected]
03030980

3 more replies
Answer Match 67.62%

Hi,

Application event viewer notification keep showing this error. Kindly advise.

Event ID: 1030
Source : Userenv
User NT Authority\System
Decription: Windows cannot query for the list of group policy object. Check the event log for possible messages previously logged by the policy engine tha tdescribes the reason fo this

Event ID: 1030
Source : Userenv
User NT Authority\System
Description: Windows cannot access the file gpt.ini for GPO CN=(31B2F340-016D-11D2-945f-00c04FB84F9,CN=Policies,CN=System,DC=mscmsia,DC=com. hte file must be present at the location <\\mscmsia.com\sysvol\mscmsia.com\Policies\{31BF340-016D2-945F-00C04FB984F9}\gpt.ini>.(Access is denied). Grpoup Policy processing aborted.


Thank you.
 

More replies
Answer Match 57.96%

Hi, I have a strange thing going on with Event 1 in the Even Viewer.
Event 1 signifies that the computer awoke from sleep (standby/hibernation), see attachment below for illustrations. It shows the time (circled in blue) which is also the time it shows in the list with all the other events, and that is the actual time the event occurred. But if you look on top of the box (circled in red) you see weird times listed over there, in fact at the time that the event take place (9:08 in this case) the times listed above didn't arrive yet. Why are those future times there, and how does the computer write something form the past into the future? I find that very strange. Do you perhaps know how that could happen?

Thank you, I appreciate it!
 

A:Event Viewer - Event 1 has weird times in it

16 more replies
Answer Match 50.82%

I've reinstalled Windows 10 on my new SSD (clean install) and today I got 6291 events, all received at once (in one minute) which say the following:
Event ID 7 WudfUsbccidDrv
Device responded with an error status.
Status: ReaderCompletionUnknownMsgType

I didn't got so much info at Google, except some obscure sites and forum posts without replies, only that is related to smart card readers, fingerprint sensors and/or VMware (?)

I have a multi card reader with a smart card slot and VMware Player. No fingerprint sensor.

The smart card reader works fine, however

Is this something to be concerned? some conflict between it and VMware?

Thank you.

A:Weird event

If this happened right after the clean install, and before, during, or right after installing drivers, then I would wait and observe it over the next couple days.
If it reoccurs then it is a problem, if it was just that one time as above I think you can ignore it.

0 more replies
Answer Match 50.4%

1) I have used Firefox for years, but began to have some problems (hangups)so I uninstalled and tried to reinstall about 3-5 times and I can't get it back. I also tried installing the new beta3 and had the same problem.

I'm assuming it could be something in the registry? I don't want to lose everything so I need your advice.

2) I want to print out my current Firefox history but can't find a way to do it. Any ideas on this?

Toshiba Satelitte A35 - XP

Thanks very much,
Barbara
 

A:Weird Firefox Event

There is a program that will allow you to view the history and then save it to a text file

Mozilla Browsers History Viewer

You should then do a clean reinstall

Doing a Clean Reinstall of Firefox
 

1 more replies
Answer Match 50.4%

Hi,

This problem drive me crazy. Every time I manipulate one image in Fireworks from Macromedia or I try to
put my mouse pointer over a falsh button in a page like www.wipeoutpure.com my system
simply reboot.

No errors messages apear before the reboot, just rebooting like to click on the reset button.

In event log i monitore these event ID error message...

Event Type: Error
Event Source: EventSystem
Event Category: (50)
Event ID: 4609
Date: 7/17/2005
Time: 6:44:47 AM
User: N/A
Computer: PROTECTA-
Description:
The COM+ Event System detected a bad return code during its internal processing.
HRESULT was C0000005 from line 44 of d:\qxp_slp\com\com1x\src\events\tier1\eventsystemobj.cpp.
Please contact Microsoft Product Support Services to report this error.


For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

I use Windows XP Pro in
AMD system +2400
768Ram
120Gb
NVidia Geforce4 MX 440 With AGP8X
ASUS A7V600-X ACPI BIOS Revision 1008 (last from ASUS)
Chipset vt 8377/vt8237

Anybody could help me in this case?

I try to reinstall Windows, reinstall DirectX,
change memory, change video board, remove antivirus programs, I tried all type of things, until esoteric
things and nothing help.

Thanks for any help.

Junior

A:A new weird event id: 4609

http://www.pcreview.co.uk/forums/sho...post&t=1865833

3 more replies
Answer Match 49.56%

Im getting this error whenever I startup and I dont understand what it is at all? Any help appreciated.
 
http://gyazo.com/eb73b2b0586ae0838d21a288f10dfcc2

A:Weird error in Event viewer.

See: http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+Operating+System&ProdVer=5.2&EvtID=7026&EvtSrc=Service+Control+Manager&LCID=1033
 
You need to determine what "BC" is.  Of the limited research I did, BC seems to point to graphics drivers, but that's not a promise.
 
Best of luck!

4 more replies
Answer Match 49.56%

Anyone seen this one before? I don't even see a service related to it?

Thanks

Event Type: Information
Event Source: Ci
Event Category: CI Service
Event ID: 4137
Date: 1/6/2006
Time: 7:33:36 AM
User: N/A
Computer: COMPUTER
Description:
CI has started for catalog c:\system volume information\catalog.wci.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
 

A:Weird Event Viewer Error

It is from Microsoft, see: http://msdn.microsoft.com/library/default.asp?url=/library/en-us/indexsrv/html/ixuweber_54xf.asp
 

3 more replies
Answer Match 49.56%

Hello All,

I am having this weird error in my event viewer and dont know what is causing it.

An error was detected on device \Device\CdRom0 during a paging operation.

Event ID: 51 Source: cdrom

It logs a new error every 6 or so seconds in the event viewer after i put a blank disc into the drive. I burn CDs using Nero 9 and i never get any errors and the discs come out perfect.

What should I do? Ignore the error, or maybe RMA my CD rom drive and see if that fixes it?

Thanks.

A:Weird error in event viewer

You can ignore the error.

See more info here;

Information about event ID 51

2 more replies
Answer Match 49.56%

I feel a little bit like someone who saw a UFO. I know what I saw, but I don't expect anyone to believe me. But I have to tell the story. Maybe someone knows what happened.

Last April, I upgraded the HDD on my Vostro. The HDD was encrypted with Symantec PGP Whole Disk Encryption. Rather than wait what I knew from experience would be an eight-hour decryption ordeal, I simply removed the HDD from the laptop in its current encrypted state and replaced it with the new, larger HDD. Then, using commercial image backup software, I restored the backup I had made the previous weekend and encrypted the new HDD with WDE. After everything was working smoothly, I put the old HDD in a box with some other stuff--thinking I'd wipe it if needed. No need to fret, since it was encrypted anyway.

This weekend, I got a new SSD to replace the new HDD already in the Vostro. This time, I decided to decrypt the HDD fully and then use my commercial software to copy the unencrypted HDD to the new SSD, using a cable that allows you to use the external HDD drive as a USB drive. After installing the new SSD, I reecrypted it. Finally, I wiped the removed HDD and formatted it to NTFS as a single partition.

My Vostro is running Win 7 Pro; I have a desktop that runs Win 8.1 Pro.

Rather than let that HDD space go to waste, I took the HDD to my desktop (running Win 8.1) and encrypted it with Bitlocker as an empty drive. Took less than a minute. Took the HDD back to the Vostro, using it as a USB. Unlocked i... Read more

More replies
Answer Match 49.56%

A little while a go i started getting random 1014 event id errors like this:

Name resolution for the name "random website" timed out after none of the configured DNS servers responded.

This is not happening while i'm surfing the web and today it happened just right after i turned on the computer.

I tried visiting some of the websites and most of them just comes up with a web hosting page and says "Account suspended" or don't exist. I doubt this is malware because i have tried reinstalling. It might be malware though. Some of the errors with the same website comes up again like 100 times or it could be an hour to some minutes or never. I am starting to wonder if someone is trying to hack my computer. Has someone else experienced this? And did you fix the problem?

Thanks in advance!

A:Weird 1014 Event ID errors

Try switching to OpenDNS server addresses to see if the problem goes away.

https://www.opendns.com/start/device/windows-vista

(This is for Vista, but will work on Win7 also.)

2 more replies
Answer Match 48.72%

Hi Security Guru's,
I am getting continuous failed logon events (4625) on our Server 2008. I can see the User and Computer name, and they are legitimate, but the Source Network Address is not an IP address, but rather a hex-type number like this (i've put in the # signs): fe##::1fb:####:4864:####

The User is not trying to login, so I want to find out where this is coming from.

How do I trace the Source Network Address?

Thanks in Advance!

Brad
 

A:Event ID 4625, with weird source network address

By (i've put in the # signs) do you mean the original SNA was fe::1fb:4864 ? If not, what was the original SNA?

-- Tom
 

2 more replies
Answer Match 48.72%

Hi Guys,
Something strange keeps happening to my databases.
I have a command button on a form that runs code to print a report on the On Click property. The actual code varies in different databases.

Every so often the event procedure disappears from the properties of the button. When I go back into design view of the form and go to the On Click bit of the properties I can 're attach' the code as the code is still sitting there. It works again for a while then it disappears again.

The databases themselves are running as separate front ends (forms, code etc.) and tables. Each user has access to their own version of the front end. The table back end is on a shared drive on the server as were the front ends. I recently moved the front ends so they are on each user's PC on their C:\ drive. I had a thought that having the front ends on the server might be causing the problem, but it happened today to a front end on a PC.

Any ideas as to the cause.
Thanks
Karen
 

A:Access 2010 Weird Event Procedure problem

Karen, I have no idea what could be causing it, but there are a couple of things you could try.
Try Compacting & Repairing each front end.
Try Compiling the Code in each front end.
Was this database originally written in Access 2010 or converted?
 

3 more replies
Answer Match 47.46%

My computer that very rarely crashes at all, just started BSODed out of the blue today (get it?). I have absolutely no clue on what is going on, except for that it maybe has to do with some sort of overclocking, because when I start Windows in Safe Mode, the computer doesn't crash, or make weird lines, which is another problem. The computer makes weird horizontal lines all over the place. It also happens in the BIOS, but again, not in Safe Mode for some reason. I have no clue on what is going on, so I will just leave you PC magicians this Problem Signature:


Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1030

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800717B8F8
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\010216-11294-01.dmp
C:\Users\Tufda\AppData\Local\Temp\WER-14851-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I can also take a picture of what the lines look like if you are curious. But for right now, thanks in advance and have a happy new year :)!

A:BlueScreen event and weird lines on monitor. Video card problem?

Welcome to 7F tufda, please follow the Blue Screen of Death (BSOD) Posting Instructions .

3 more replies
Answer Match 45.78%

Alright, started getting the 1001 BugCheck crash with Event 41 Kernel-Power BSOD a few times not long ago, widely spaced out incidents (it will lock up, make a very weird repetitive noise through my stereo speakers and will also get black and white bars across the screen before the blue screen turns up and asks for restart option choice). And Event 4 k57nd60a has been ongoing for as long as I can remember.

Any ideas?
Event 1001, BugCheck
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff8800646843a, 0xfffff880028c5a10, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 041312-18205-01.

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-04-13T14:05:58.000000000Z" />
<EventRecordID>39029</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>M... Read more

A:Event 1001 BugCheck Event 41 Kernel-Power Event 4 k57nd60a

Memory exception but we need to examine the DMP files to find out why.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb ... Read more

9 more replies
Answer Match 45.78%

I have Windows XP Home edition on my computer at home - Is there a way I can restrict access to the right click on taskbar,disable acess to Control Panel,Disable installiations of programs, etc. etc. etc.

If this is a program downloaded off the Internet, it needs to be FREE and without limitations, or disabled features.

Then for the IE: Resrict IE access to inapproporiate sites etc. (Porn,violence) you get the idea...

I know in XP Pro you can go to: Run,"gpedit.msc" but will not work in HOME. Thanks for any help you can give me.
 

A:Restrictions/Non Restrictions 4 (XP HOME)

If you are not averse to tweaking the registry yourself, you can probably find all the equivalent restrictions in Winguides registry tweaker:

http://www.winguides.com/software/display.php/1/

example:

Disable Taskbar Context Menus (All Versions)
Category: Home > Security > Start Menu and Taskbar
Download: WinGuides Tweak Manager
This setting removes the context menus (right click on the taskbar) for the system tray, including the Start button, Tab control, and Clock.

Open your registry and find the key below.

Create a new DWORD value, or modify the existing value called 'NoTrayContextMenu' using the settings below.

Exit your registry, you may need to restart or log out of Windows for the change to take effect.
(Default) REG_SZ (value not set)
NoTrayContextMenu REG_DWORD 0x00000001 (1)

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Exp...

Settings:
User Key: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\
Explorer]
System Key: [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\
Explorer]
Name: NoTrayContextMenu
Type: REG_DWORD (DWORD Value)
Value: (0 = disabled, 1 = enabled)Click to expand...
As for restricting specific sites or domains, you can do that directly using Internet Options > Security > Restricted Zones -- just add the domains or urls there. But this only works for specific sites and domains. Broad restrictions require filtering software -- which you have to ... Read more

1 more replies
Answer Match 44.94%

Greetings,  I was wondering what to look for if I wanted to upgrade my 320-1030  in terms of a motherboard and CPU? I was contemplating upgrading the CPU to an A8-3820 on the existing board, but I now am wondering if it is possible to move to a faster CPU (which I am assuming would require a new motherboard  if that is possible).

More replies
Answer Match 44.52%

One of our users just lost control of her PC. Someone remotely took control of her mouse. The only unusual activity we have seen thus far is Port 1030 called iad1. Has anyone seen this?
 

A:iad1 on TCP 1030

Hi nmorrisonaz,

Not sure If any malware can do that.

But please do this. Click here to download Hijack This. Run Hijackthis.
Click the "Scan" button when the scan is finished the scan button will become "Save Log" click that and save the log.

Go to where you saved the log and click on "Edit > Select All" then click on "Edit > Copy" then Paste the log back here in a reply.

DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required. Someone here will be glad to advise you on what to fix.

*Note: When you download Hijack This Do Not download it to a temp folder or to the desktop. Create a permanent folder somewhere like in My Documents and name it Hijack This and put it in that folder.
 

3 more replies
Answer Match 44.52%

Does anyone know where I can order an usb drive to get my HP Mini 1030NR restored to factory setting? Thnx 

A:Hp Mini 1030 NR

hi. did you ever get the recovery disks? I am in the exact same situation and cannot for the life of me find the recovery image anywhere!

1 more replies
Answer Match 44.52%

On the hp website it stated that the i7 2600 is supported, now that I tried it on boot the screen says unsupported cpu installed and it justs shuts down, I already upgraded the bios any suggestions that I can do to resolve this? thanks in advance

A:520-1030 cpu upgrade

An Intel Core i7 2600(95W TDP) and 2600s (64W TDP) is supposed to be supported. Are you certain that what you installed is not an Intel Core i7 2600k instead?

9 more replies
Answer Match 44.52%

Hello, I've been saving up for some time now and I would like to build a good gamin computer. I know I have the right money to build a solid performing one, one that can run games on high quality too. The only problem is, I don't know which parts to buy. I do know how to build it however. I would like some help selecting parts from you. One final point, I will want it for doing other stuff, not demanding just practical uses like searching and making documents etc. Thanks so much!
 

A:New PC Build - £620 ($1030)

You need to provide a little more info;
1 Do you want amd or intel?
2 Do you have any parts you are going to reuse ie case, keyboard/mouse, optical drive, etc?
3 Are you including the cost of windows for your new build?
 

2 more replies
Answer Match 44.1%

   Information
Foxits free PDF Reader has been updated to 3.1.3.1030. You can get it here.
Foxit Software

A:Foxit PDF Reader 3.1.3.1030 available

+1 for Foxit Reader (especially those of us with a distaste for Acrobat).

2 more replies
Answer Match 44.1%

v6.2.0.1030 Apr 13, 2015

Fixed: Bug fixes
http://www.360totalsecurity.com/en/version/ts/

Download:
http://free.360totalsecurity.com/totalsecurity/360TS_Setup_6.2.0.1030.exe
 

More replies
Answer Match 44.1%

So I want to upgrade my RAM on the 320-1030. The specs page says "Two 200-pin DDR3 SO-DIMM sockets".It also says "Supports DDR3 SO-DIMMs" and specifically "PC3 10600 (1333 MHz)" and "PC3 12800 (1600 MHz)". Yet more HP contradictions (lies?)1) The parts page lists the item pre-installed is 572293-D88, a 204-pin item. See here, here, here, here, and here.2) Using the automated systems for major RAM sellers all indicate 204-pin RAM will work on the 320-1030. Crucial.comNewegg.com What gives?!? 

A:Touchsmart 320-1030: Is it 200 pin SO-DIMM or 204?!?!? Yet m...

Hi: I do not believe there is any such thing as a 200 Pin DDR3 SODIMM, so HP's reference to that is incorrect. A DDR2 SODIMM memory module is 200 pin, and a DDR3 SODIMM is 204 pin. http://en.wikipedia.org/wiki/SO-DIMM Paul

9 more replies
Answer Match 44.1%

For this type what can I upgrade my processor to?  I believe it's only a 4GB as well. I need more RAM and processing power. thank you

A:I have an HP TOUCHSMART 320 PC MODEL 320-1030 looking to upg...

Hi, Yes. Please check 2 sections Processor upgrade informationMemory upgrade informationon the following link:     http://support.hp.com/au-en/document/c03026602 Regards.

1 more replies
Answer Match 44.1%

I was trying to speed up a Touchsmart 600   Info below:
Model #: 600-1000t
Product #: AW023AV-ABA
[personal information removed]
Software Build #: 94NAv6PcA5
Service ID #: 011-610
PCBRAND: Pavilion
 
I search HP support and it says :   
Memory: DDR3 SO-DIMM (200-pin)
Tyoe: PC3-10600 (DDR3-1333 MHz)
 
Of course when I google "DDR3 SO-DIMM (200-Pin) PC3-10600 i get all types of hits for HP Touchsmarts,  when I remove the (200-pin) from the search criteria i get all types of 204-pin RAM Sticks. 
 
I would tend to beleive that HP's telephone support technicians in what sounds like india don't know and they're looking it up in their data-bases.  I believe the HP databases to be incorrect.  The best option is to remove a stick and see exactly what the label on the Memory Stick says, and then buy bigger sticks of the same RAM as in the computer.  I have 3 sticks to try,   DDR3 - 1066 MHz,  DDR3 - 1333MHz  & DDR3-1600MHz.  i think it's the

A:Touchsmart 320-1030: Is it 200 pin SO-DIMM or 204?!?!? Yet m...

Spoiler (Highlight to read)  I think I'm going to go with the 204-Pin.   I think the printed HP documentation is a typo and they really intended to type 204-pin.   I don't think it's my memory anyway because the usage rarely goes over 25% usage of physical memory.  i think the server i'm accessing is running slow... 

1 more replies
Answer Match 43.68%

Is it just my imagination or has the attempts to begin communication on about ports 1025-1035 begun to rise?

Looking over data on this I really dont see its nominal importance other then the beginning of the road or bottom of the stairs to attempt throughput communication, if you will =)

Anyone else care to take a stab at this ?

-Z
 

A:Port 1030 Alerts, Give or Take

7 more replies
Answer Match 43.68%

Hello everyone, I have been trying to get my wireless working on my Dell Inspiron n5110 on Windows 7 64 bit to no avail. In device manager I have the error "code 10 this device cannot start" I have tried almost everything so far. Reinstalled drivers multiple times, with multiple versions. I have replaced the adapter even though I knew it was a software problem because the wireless works on a live boot Ubuntu and as a last resort I have reinstalled Windows and installed all the proper drivers but still nothing. Any thoughts on what I could be missing or some suggestions?

A:Centrino-n 1030 driver issues

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

8 more replies
Answer Match 43.68%

I just looking for information on how to install windows 10 on my Touchsmart 320-1030 PC. The PC is only 2-4-year-old and runs great. What steps do I need to take, in order to install windows 10 on this device?

More replies
Answer Match 43.68%

I am totally obsessed with downloading music, but awhile ago I attemped to download an upgrade to the basic Kazaa system. Once I had fully downloaded the upgrade I went to click on Kazaa and a message popped up saying," You have uninstalled a part of Kazaa needed to run and to close and reinstall." (I believe it was called error 1030, I'm not positive though) Anyway, I uninstalled Kazaa and reinstalled several times and the same message keeps appearing.I checked to make sure I had all the needed componets to run Kazaa aswell. I can't figure out what to do. I tried other music sources but I can't find one I like as much as Kazaa. If you know what I should do please HELP!!
 

A:Kazaa Error 1030, any adivse?

What I would do is:

1. Use a spyware scanner to delete all the spyware that comes with the Kazaa download
2. uninstall Kazaa using the JV16 power tool
3. Do a file search for Kazaa and delete all of the files that are found.
4. Backup the registry
5. Use Jv16 power tool to clean the registry.
6. If you want to and are brave enough, do a manual search for useless Kazaa keys in the registry (be sure to have a backup if you do this)
Reinstall the latest Kazzaa with all of its Spyware. (Perhaps you might want to try Kazaa Lite)
 

2 more replies
Answer Match 43.68%

Hello, we have recently purchased several HP Elitebook 1030 G1 notebooks. These come with Windows 10 out of the box, and no discs at all. HP seem to offer a Windows 7 recovery disc via drivers & downloads but this only seems to be for drivers and applications post-Windows 7 install. We still use Windows 7 (Enterprise x64) deploying via SCCM. As the laptop doesn't have a LAN port HP support suggested getting an HP USB-C to Ethernet adapter, but this doesn't seem to help with PXE boot. So moving onwards, I then attempted to do a manual install of Windows 7 x64 via USB. Initially it didn't even boot without turning off secure boot and turning on legacy boot. As the laptop has an M.2 ssd it is not even found by the setup process. I have now gone through adding sata and usb3 drivers via dism to boot+install wim's and also an MS hotfix for NVMe support (https://support.microsoft.com/en-us/kb/2990941). Unfortunately after all this it is still not able to see the hard drive. Unless I am going blind I cannot see any information about this on HP Support. Has anyone done this on this model notebook or similar (ie M.2 ssd)? Thanks

More replies
Answer Match 43.26%

Thanks for any help.

Event Type: Warning
Event Source: WinMgmt
Event Category: None
Event ID: 5603
Date: 28/11/2006
Time: 17:57:33
User: USER-2F62D3344E\user
Computer: USER-2F62D3344E
Description:
A provider, OffProv11, has been registered in the WMI namespace, Root\MSAPPS11, but did not specify the HostingModel property. This provider will be run using the LocalSystem account. This account is privileged and the provider may cause a security violation if it does not correctly impersonate user requests. Ensure that provider has been reviewed for security behavior and update the HostingModel property of the provider registration to an account with the least privileges possible for the required functionality.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

A:What's this event in event viewer? (event source WinMgmt)

http://support.microsoft.com/default...b;en-us;891642
this might help

1 more replies
Answer Match 43.26%

I'm trying to replace a faulty wireless card and I can't figure out for the life of me where to order a new one. 'HP Part Surfer' doesn't return anything. I'm also not entirely sure where the part number on the wireless card is, all I can really see that might be it is a 'PNOP' number.Thanks in advance!

A:Ordering a Intel Centrino Wireless-N 1030

Dear Customer,  These are the Wireless cards supported by the unit. Intel Centrino Advanced-N 6230631956-001.Intel Centrino Wireless-N 1000593530-001.Intel Centrino Wireless-N + WiMAX 6150633817-001.  Also please check the below link having the complete guide of your unit.http://h10032.www1.hp.com/ctg/Manual/c02842252  I  recommend you to Contact HP Support over the Phone for further assistance.  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

1 more replies
Answer Match 43.26%

Hello, i have an HP Touchsmart 520-1030, and i wish to upgrade it with i3-3225 processor that i own. Tried to replace it with mine i3-2120, but pc just does not boot. Any way to upgrade bios to support ivy bridge processors? For now i have latest bios 7.12. I see the only difference between models that support ivy and not, is MB name Lavaca3SB[supports ivy] and LavacaSB[does not]. Is it the same mb and i can install Lavaca3SB's bios to mine LavacaSB board or this will not work that way?

More replies
Answer Match 43.26%

I noticed my wireless 1030 is acting strange after getting BSOD(not the cause of Wireless but it was solved)and now I'm experiencing some problems, here are the issue. I'm worried if it is the NIC card

1.like it takes a while to connect to a certain webpage then whenI looked up on Event viewer it stated in the lines of Google too long to respond DNS

2. sometimes the wireless would switch off by itself and when I try to reconnect to my home router it says "Cannot find my router* yet I can see it shows my wireless router is available then when I look up event viewer it states " NETBIOS over TCPIP has entered Stop state".

I would have to click on

*Troubleshoot Problems which then would let me reconnect back in the router*

3. I have been getting this new event viewer error 5060:
The description for Event ID 5060 from source NETwNs64 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\NDMP32
Intel(R) Centrino(R) Wireless-N 1030
I can see my network information by typing ipconfig/all BUT recently I performed a Intel? PROSet/Wireless Software Manual Diagnostics Tool and it failed on "Radio ON test" yet my wifi switch was ON. I... Read more

A:I'm having wireless Issues with the Intel 1030,Turning off by itself

It almost sounds like a nic driver issue. Have you updated it recently? Try to update, or roll-back if update did not work.
Replacing your nic should not be to hard depending on your device. Usually the nic is the easiest of the add-on boards to get to. But, I really don't think it's the nic. Were you changing, installing, updating anything with your hardware, operating system when this happened? If driver update/rollback doesn't work, try a system restore if feasible.

4 more replies
Answer Match 43.26%

Hi,

Please guide me how I can get a driver for my brother printer HL -1030 for Windows 7. I called Brother office in Canada and they say this printer is not compatible with Windows 7. Is there any other printer driver I can download and get my printer working.

Thanks in advance.

Wonderdollar

A:Brother HL-1030 printer driver for Windows 7

You should be able to use the XP drivers and install them in compatibilty mode.

Here's a link to the XP Home/Pro 32-Bit Drivers
Brother Solutions Center: HL-1030: Downloads: Others

To run the installer in compatibility mode:

Right Click Installer > Properties > Compatibility > Select the OS you want. (In this case, XP)

9 more replies
Answer Match 43.26%

First up, hello everyone.

I have XP computers connected to a SBS2003R2 domain that is posting 1030 Userenv errors in the eventlog. I've not checked them all but three of them definitely are, so we can presume they all are.

Through Userenv.log, I've wiggled it down to two variants of:

USERENV(314.480) 21:50:37:892 ProcessGPO: CheckFilterAcess failed for <CN={C94DA5DA-A892-44ED-B77D-618A143ED5CC},CN=Policies,CN=System,DC=[domainname],DC=local>. Filter not found
Click to expand...

Followed by many of the following that correlate with the eventlog errors:

USERENV(318.868) 09:47:24:929 ProcessGPOs: GetGPOInfo failed.
Click to expand...

My question is - whereto from here? OUs, GPO and the such is on the edge of my knowledge. It seems that if I can find what GPO is failing, I'm there.
 

A:Eventlog 1030 and userenv GetGPOInfo failed

I would suggest since you are apparently having troubles with a Small Business Server that you ask to have this post moved to the Networking forum here at TSG. You will get a better response there. You can do this by clicking the little triangle at the top right corner of the window and ask a moderator to please move this thread to that forum
 

2 more replies
Answer Match 43.26%

hi!

hello, first off i have scanned with adaware pro se, spybot, and h2, also mcafee antivirus and a couple of online scanners--this is what remains

i have some pesky files burrowed into my pooter, i am pretty sure the files in the temp folder are bad....but when i search for the executable, all i can find are prefetch files....i think the prefetch files are generating the temp files...

i have used msconfig to stop some files from statring,and that has stopped an error screen that displayed this message at start up everytime:

rundll egdhtml-1030 dll error

i reactivated them in msconfig for this logfile...

also- whenever i turn on the computer, it frezzes up after booting to windows, i found that killing all the rundll32.exe files make it able to run again!!!!!!

so they must be bad, too...

here is my log, thank you very much for any help!!

Logfile of HijackThis v1.99.0
Scan saved at 3:36:10 PM, on 1/30/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\McAfee\McAfee Privacy Service\GUARDDOG.EXE
C:\WINDOWS\system32\gearsec.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MPFSERVICE.exe
C:\PROGRA~1\McAfee\SPA... Read more

A:egdhtml-1030.dll error+rundll32.exe*logfile inc.*

Please print out or copy this page to Notepad. Make sure to work through the fixes in the exact order it is mentioned below. If there's anything that you don't understand, ask your question(s) before proceeding with the fixes. You should not have any open browsers when you are following the procedures below.

Go to My Computer->Tools/View->Folder Options->View tab and make sure that 'Show hidden files and folders' (or 'Show all files') is enabled. Also make sure that Display the contents of System Folders' is checked. Windows XP's search feature is a little different. When you click on 'All files and folders' on the left pane, click on the 'More advanced options' at the bottom. Make sure that Search system folders, Search hidden files and folders, and Search subfolders are checked.

For the options that you checked/enabled earlier, you may uncheck them after your log is clean. If we ask you to fix a program that you use or want to keep, please post back saying that (we don't know every program that exists, so we may tell you to delete a program that we think is bad to keep).

Turn off system restore by right clicking on My Computer and go to Properties->System Restore and check the box for Turn off System Restore. Click Apply and then OK. Restart your computer. After we are finished with your log file and verified that it's clean, you may turn it back on and create a new restore point.

Download AboutBuster and unzip it to a folder on your the D... Read more

4 more replies
Answer Match 43.26%

The video card in my Pavilion h8-1030 died and I need to find a replacement. If possible, I'd like to upgrade the card at the same time to the best possible card that would work on this system, within on total $350 budget. Being overly optimistic and with a big dose of wishful thinking I had actually ordered a MSO GeForce GTX 970 , but before it arrived I read that it will not work as teh BIOS version cannot be upgraded to version 8. So I am sending that card back as soon as it arrives. I am unable to buy a whole new computer at this time, so I'm going to have to settle for a new GPU (and PSU if needed). I don't game but I do use Adobe CC 2015 applications, mostly photoshop adn lightroom but ocasionally also premiere and in-design. Before failing the old card was struggling with certian photoshop functions and video editing was slow and frustrating. This is why I would like to upgrade the GPU. Motherboard H-RS880-uATX (Aloe)Processor AMD Phenom II X6 1090TMemory 10 GBBIOS, American Megatrends Inc. 6.12 Is there a list of compatible GPUs? Thank you ever so much for your help.

A:what Video Card upgrades are possible for Pavilion h8-1030?

Hi, The version 6 BIOS in your PC is not compatible with many of the newer graphics cards.  You will need to use an older legacy graphics card in your PC.  The processor and memory in your PC are more than sufficient for most use. I suggest that you look for a NVIDIA GTX 660 for around $226 new on Amazon. You can find the GTX 660 on eBAY for a lot less.  You will also need to replace the power supply. The Corsair CX650m should be around $55 after rebate.    

2 more replies
Answer Match 42.42%

Hello,

I sent my computer in for repairs a while back and now the wireless card won't work. It can't find any signals unless I plug in the one from my desktop. I went to computer/properties/device manager and saw that the wireless card (Intel (R) Centrino (R) Wireless-N 1030) has a yellow "!" next to it. The properties tab says, "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)".

I have tried searching for new drivers automatically but it says they are up to date. I downloaded the latest drivers directly from Intel and tried to manually update them but it said that the drivers are up to date again. This problem occurs whenever I update my computer. I did a system restore and it worked fine for about a month, but once it updated it did the same thing again. There is no restore point to go to this time, so I'm stuck.

Anyone know what I should do?

Thanks

More replies
Answer Match 42.42%

 Hello, Wireless functionality was lost on my HP Pavillion dv7t-6c00 laptop when I upgraded to Windows 10. Here's what I have in my laptop now: Manufacturer: Intel CorporationDescription: Intel(R) Centrino(R) Wireless-N 1030Driver version: 15.11.0.8 I've read some support threads on this topic and it seems that this wireless card is not supported by Intel in Windows 10. I've also read that one suggestion is to replace the wireless card with an Intel Advanced-N 6230 wireless card. I tried to replace the wireless card prior to upgrading to Windows 10 with an Intel Advanced-N 6230 wireless card but the wireless card I purchased seemed incompatible with the laptop, as it gave me a Halted screen when I started up the laptop.  So my frustration is I would gladly and easily replace the wireless card but I can't keep purchasing cards that are incompatible with the laptop. What are my options?  Is there a specific/guarenteed HP Laptop compatible part number that I can purchase?   Even better, is there a link to where I can purchase a card that will definitely work? Thank you ver much,Chris  

More replies
Answer Match 42.42%

I used a copy of windows 7 professional to wipe the system because I was giving it away. I have the operating system up but can not access the network card to access the internet. I've downloaded the drivers on the software page but get the message that the file is not compatible with the system. I see the recovery disk I can order, but was hoping to find an image of the recovery disk that I can download and burn to a disk myself. Overnight ordering still has a statement about it taking 2 days to process first. Is there another area online that I can get the recovery disk downloaded? Serial number: 3CR2160C7B Thanks in advance.  

More replies
Answer Match 42.42%

After recovering this system, I went to the HP site to download drivers for it.  The message I received is that there are no drivers for this model running that OS.  I am confused since the original OS on this system was 7.

A:How to download drivers for Model 320-1030 running Windows 7

@BocaRay?, welcome to the forum. Here are the Software and Drivers Downloads for the computer for Win 7.  If you haven't done so, you should run HP and Windows Updates, also.  You should use HP Support Assistant to check for HP updates.  The latest version of HPSA is here. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

1 more replies
Answer Match 42.42%

Can some Tech Guru tell me if its safe to use the system backup cleaner.? It found 1.8 GB to be cleaned. What to do..???
 

A:Quihoo 360 Total Security 6.2.0.1030 Sys Backup Cleaner

yes it is safe.

i removed 6 GB system backup files myself.
 

9 more replies
Answer Match 42.42%

I need to upgrade my wifi card from the intel Centrino Wireless-N 1030.  I checked the manual and it says a cards i can use, but then i see that card won't work on hp.  Can someone please tell me the exact card I can use that is an upgrade from the 1030 as all that wifi card has done is give me issues.  My laptop is a hp pavilion dv7-6c60us.  The OS is windows 7 64bit.  This whitelist crap makes everything a pain in the butt!!! 

A:I need to replace my intel Centrino Wireless-N 1030 wifi car...

Hi, Your machine was built before second half of 2014 therefore the chance to upgrade wireless card is very slim to none. There is a list on pp 6 and 7 of the following manual:           http://h10032.www1.hp.com/ctg/Manual/c03099448.pdf You can use USB wireless adapter, this will cost you one USB port       http://www.officeworks.com.au/shop/officeworks/c/technology/networking/wireless-usb-adapters     (Note: much cheaper from other countries). Regards.

1 more replies
Answer Match 42.42%

I have a relatively new (few months) laptop of my own running Win7 x64 with an "Intel Centrino Wireless-N 1030" wireless network adapter. For some reason, I have serious problems connecting to most wireless networks. On my home network there are rarely problems, but when I attempt to any other network (college, or public hotspot, or neighbor's open wireless) there are often issues.

By "issues" I mean: when I first attempt to connect to the network in question, I'm usually able to connect to the first few sites I try to access, but usually after a second or a minute or a few minutes of normal connectivity, I'm suddenly unable to access anything. The browser's response is that DNS lookup has failed; when I record an IP address (via ping-command prompt) and type it in manually after this point, the browser's response is that "##.##..." is taking too long to respond, etc..." No other program is able to connect either. I have tried setting different DNS servers but it has had no visible effect. At this point, the only thing I can do to reconnect is to either wait a long time for the connection to reestablish itself (which can take an hour or more and isn't guaranteed) or to go to Device Manager and disable and reenable the wireless adapter, which then *sometimes* allows me to reconnect for a few seconds or a minute or an hour before connectivity breaks again. When the connection fails, Windows displays the computer ... Read more

A:Unreliable connectivity - Intel Centrino Wireless-N 1030

I had the same issue too. My GF's laptop has a 1030 wireless NIC and it had all sorts of issues connecting to the APs in my house. It would work fine with her Linksys wireless router and my Sprint MiFi. But had connectivity/performance problems when connecting to either of my Netgear APs (WG102 and WNDAP350) along with my PC W 620 wireless controller with AP 105 and AP 125 access points. Updating the drivers helped the problem somewhat, but we were still experiencing dropped packets or extremely high latency when connected. Upon a suggestion from one of my coworkers, I tried adjusting the performance/power settings in Windows and that seemed to have fixed the problem. The laptop has been running fine ever since.
 

1 more replies
Answer Match 42.42%

Hello,

I'm having a strange problem. Intel released new drivers to update from version 15.11 to 16.11. I downloaded them from Intel website, ran install, success. When I go into Device Manager to check on the driver version, I see it is still 15.11. I have tried a number of things, including deleting the drivers from the Device Manager and running the install again. However, in this case Windows 8 automatically installs even older drivers, version 14, dated 2011. I'd like to try the new drivers because it takes very long for the net to comeback after I wake up my laptop. Version 15.11 was installed by Windows Update, those drivers are dated January 2014.

A:Drivers update for Intel Centrino Wireless-N 1030

Just disable allowing Windows to automatically install drivers.

8 more replies
Answer Match 42.42%

This card supports 802.11n. Obviously... it's right in the name, plus device manager>network adapters>Intel Centrino>Advanced tab clearly shows n enabled.

But can anyone take a second to tell me, if you know, why when I run the command netsh wlan show drivers, "radio types supported" shows only b and g, and NOT 802.11n ??? Confusing to me.

A:Intel Centrino Wireless-N 1030, CMD prompt question

that is odd but if your connected using N and your drivers are up to date i wouldn't worry about it.

1 more replies
Answer Match 42%

I turned on my computer today and the computer says Error: No boot disk has been detected or the disk has failed. What do I do to fix this.

More replies
Answer Match 39.48%

Hi all,

i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

"event log service is unavailable. verify that the service is running."

so i try to start the event log service, from the services.msc program;
whenever i try to start windows event log from services i get the message:

"Windows could not start the windows event log service on local computer.
Error 3: The system cannot find the path specified."

how can i specify the path?
or
how can i resolve the problem?

any help would be appreciated please---thanks

A:HELP need to solve this problem asap - Unable to start event viewer/event log service

Fire up regedit and find this key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog

With "Eventlog" highlighted on the left pane, you should be able to see a value called "ImagePath" on the right. ImagePath should be equal to this:

%SystemRoot%\System32\svchost.exe -k LocalServiceNetworkRestricted

If you can't see "ImagePath" in that location, or if it's not set to the text above, that's almost certainly your problem. If you're in the habit of using "registry cleaners", that might be the cause.

3 more replies
Answer Match 39.48%

Hi, all. I have been trying to figure out a serious of issues that my PC has been having. It's possible they were caused by poorly seated RAM, but the RAM seems to check out now. There is a whole slew of details on the case here: TechNet with a lot more information that will be of help, including posted evtx files. I have always gotten great help here, though, and am in dire need of a second opinion, so I thought I would check with this forum's experts.Here is the basic gist, although there is a ton more detail on the other link:Since building this machine, I've had frequent BSODs, often seemingly-related to middle of the night MSE updates, or possibly other windows updates. These always required a System Restore to recover from, as Windows was unbootable. Often it said the Restore failed, but it seemed to resolved the bootability issue at least.I have removed MSE and reseated some RAM that initially tested poorly, but which now seems to be passing MemTest no problem.I still have a series of issues that occur, and the one that was causing noticeable issues was SuperFetch causing sysmain.dll to fault (Event 1000, posted below) on every boot and periodically throughout the day. I have disabled SuperFetch, which stopped the issue from happening every boot, but it still happens occasionally, so it seems SuperFetch is but one trigger.The other most common error I have is Event 55 (posted below), possibly related to Windows Backup and/or System Restore, which seems ... Read more

More replies
Answer Match 39.48%

Description:
Error code 100000d1, parameter1 00000060, parameter2 00000002, parameter3 00000000, parameter4 ba60578c.

For more information, see Help and Support Center at
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 64 100000d
0020: 31 20 20 50 61 72 61 6d 1 Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 36 30 2c 20 000060,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 30 2c 20 62 61 36 30 00, ba60
0050: 35 37 38 63 578c

Some body can help me ?
 

A:Random restarts Source:System Error Event Category: (102) Event is 1003

Inside the 1 MiniDump:




BugCheck 100000D1, {60, 2, 0, ba60578c}
Probably caused by : nvata.sys ( nvata+1378c )Click to expand...

Uninstall the nvidia drivers from the control panel
Download and install the latest drivers
 

2 more replies
Answer Match 39.48%

duct: .NET Framework; Version: 2.0.50727.8670; Event ID: 0;
Event Source: TOASTER.EXE;


 

More replies
Answer Match 39.48%

Hi,
keep getting the errors above every startup regarding;
11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.
Context: Application, SystemIndex Catalog
Details:
(HRESULT : 0x80004005) (0x80004005)"
I have 3 admin user profiles.
Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch event viewer or mouse customisation softwares, they freeze temporarily and ... Read more

A:Windows 7: Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

7 more replies
Answer Match 39.48%

I was running 3DMark06 and got a BSOD code 124. After that every time I boot Event Viewer logs Error Codes ID 3012 and 3011. Attached are screenshots of both.

I googled this and found two different threads where someone suggested to rebuild the performance counters. Both responses were basically the same, below is one. Neither of the OP's came back and said if this worked for them.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Re: LoadPerf 3011, 3012
Hi-
I had the same problem with LoadPerf and here is what I found out:
All performance counter names and explain text are maintained in string tables managed by the performance counter subsystem (Perflib).

The current contents of the performance counter string tables are corrupted and cannot be displayed. To correct the problem, rebuild the string tables.

User Action
To rebuild the string tables, on the computer that displayed the message, at the command prompt, type Lodctr /r
The contents of the string tables are automatically rebuilt.

I hope this helps
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Since this was from 2008 (XP?) and the other response was for Vista I wanted to see if the guru's at SevenForums thought that this was okay before I did this.

Here are the screenshoots of my two errors.

A:After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot

Rebuilding the string tables as outlined in my first post fixed the problem.

1 more replies
Answer Match 39.06%

Hi,

keep getting the errors above every startup regarding;

11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

Context: Application, SystemIndex Catalog

Details:
(HRESULT : 0x80004005) (0x80004005)"

I have 3 admin user profiles.

Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch ... Read more

More replies
Answer Match 39.06%

Hi,

I was hoping somebody could offer an insight on the below, as searching around I've not found much to go on other than "overheating"

Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):



I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:



So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:



Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?

The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors, if anyone has any advice that'd be great.

... Read more

A:WHEA-Logger event 18/19 errors in Event Viewer (W7 Home Premium)

First, well done on applying the thermal paste to the cpu/gpu. I assume you cleaned the vents as well. Did you use arctic silver 5 (just curious)?

I wonder if the processor could have been damaged from the heat. Are you experiencing any BSODs or other problems? You can run Prime95 to test your system. And Furmark for gpu.

2 more replies
Answer Match 39.06%

Hi people,
I have setup a disk quota usage for the user "tester" 
50mb = warning level
100mb = Quota limit
When I generated a file of > 50mb then I see well a event
Level,Date and Time,Source,Event ID,Task Category
Information,23-09-16 15:10:24,Ntfs,36,(2),A user hit their quota threshold on volume C:.
when I try put a second file of more than 50mb also, first i'm block to copy it (good) and then i receive well then related event
Level,Date and Time,Source,Event ID,Task Category
Information,23-09-16 15:10:38,Ntfs,37,(2),A user hit their quota limit on volume C:.
so I erase the files and try again, and then nothing in the event log !
I have try : restart the quota management, to pout other limit for that user, to disable then enable again limitation for this user without success ! once the event 36 & 37 appear it seem that he never appear again even if a warning, limit is triggered
again...

any idea... ?

More replies
Answer Match 39.06%

Hi,

keep getting the errors above every startup regarding;

11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

Context: Application, SystemIndex Catalog

Details:
(HRESULT : 0x80004005) (0x80004005)"

I have 3 admin user profiles.

Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch ... Read more

A:Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Hiya and welcome to SevenForums!
Please contact an admin to move this thread, because this isn't the appropriate section for these kinds of problems.

4 more replies
Answer Match 39.06%

i have been having this error for a couple days now and it also seems to be associated with another crash im getting from a game i play also.

first one is a memory dump blue screen issue and the other is just the game crashing.


Script:



Log Name:      Application
Source
:        Microsoft-Windows-WMI
Date
:          1/17/2015 10:53:52 AM
Event ID
:      10
Task Category
None
Level
... Read more

A:Event ID 10 Event Filter Query Functionality CAUSING BLUE SCREEN

Still nothing responded on this.

1 more replies
Answer Match 39.06%

received three error codes in a row with the following error message:Windows Operating System; Version: 6.1.7600.16385; Event ID: 11; Event Source: Disk, what do i do i need help please.........
HP,WINDOWS 7 HOME PREMIUM
 

A:Windows Operating System; Version: 6.1.7600.16385; Event ID: 11; Event Source: Disk

11 more replies
Answer Match 39.06%

The exact details are Log Name:      Application
Source:        SideBySide
Date:          9/23/2015 1:28:53 PM
Event ID:      80
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Angela-PC
Description:
Activation context generation failed for "C:\Program Files (x86)\Slingplayer Desktop\Slingplayer Desktop.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component
version already active. Conflicting components are:. Component 1: C:\windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18837_none_fa3b1e3d17594757.manifest. Component 2: C:\windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18837_none_41e855142bd5705d.manifest.

if someone can help with this error in my event log i would be so grateful.

More replies
Answer Match 39.06%

Well, I tryed to manage page-file but unfortunataly it resulted in problems. Then I lost VAIO-CARE and 7 ZIP files too. When I open Event Viewer every single day I see this: event Id 2002, Souce: Eap Host, Log name: Application and number of Eventes: 84. As I am desparate about that, What sould I do? Reinstall VAIO-care or WHAT else? Please help me!!!!! Well, I can say that before of all, I tryed to install vopt, latest version but it was not freeware and I soon had to uninstall it but it was not getting to uninstall from programs and features and then I used register editor to delete the leftovers which desapered from program and features....but I can see several error in event viewr such as Event 11706, MsInstaller >>>> Product Vaio Media Plus -- Error 1706 - An instalation for the product Vaio Media Plus cannot be found. Try the installation again using a valid copy of the instalation package 'VMP VEPMMx64.msi'. So should I reinstall all vaio care or not................!!! By the way I tryed to install vopt in order to align files in hard drive but when I tryed to manage page file it did not work as should have so I lost vaio care..........................................What to do? can you figure out what going on.................!!!

A:Event Viewer Event Id 2002, Source: EapHost, Log Application

Welcome to the forums Marioo!

Have you tried a system restore to a point before these errors started? (Easiest things first) You could also try a sfc/scannow, to find and possibly repair any corrupted system files. We have many fine tutorials here at the forums, written by some very knowledgeable people, heres a link to one if you haven't did this before :

SFC /SCANNOW Command - System File Checker

5 more replies
Answer Match 39.06%

Hi all,

I've just built an AcerPower F6 desktop to Win 7 Pro 32 every shutdown it shows BSOD and promptly restarts.

Event log is showing me the following for a critical event at the same time the shutdown occurs (The date on the log is from a week ago but this happens every shutdown which is once every weekday):

Log Name: System
Source: Microsoft-Windows-Kernel-Processor-Power
Date: 14/03/2014 13:19:19
Event ID: 6
Task Category: (6)
Level: Error
Keywords:
User: SYSTEM
Computer: CUR-ICT-01.LODGEFARM.LOCAL
Description:
Some processor performance power management features have been disabled due to a known firmware problem. Check with the computer manufacturer for updated firmware.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Processor-Power" Guid="{0F67E49F-FE51-4E9F-B490-6F2948CC6027}" />
<EventID>6</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>6</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-14T13:19:19.519629700Z" />
<EventRecordID>5118</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="52" />
<Channel>System</Channel>
<Computer>CUR-ICT-01.LODGEFARM.LOCAL</Computer>
<Security UserID="S-1-5-18" /&g... Read more

A:BSOD on Shutdown Event Log = Kernel-Processor-Power. Event ID: 6

Your NI Measurement Studio driver appears to be causing problems.


Code:
Probably caused by : NIPALK.sys
It's outdated by 11 years, if you wish to keep the program I suggest you update the driver.


Code:
88a32000 88aab000 NIPALK T (no symbols)
Loaded symbol image file: NIPALK.sys
Image path: \SystemRoot\System32\Drivers\NIPALK.sys
Image name: NIPALK.sys
Timestamp: Mon May 12 22:21:05 2003 (3EC01041)
CheckSum: 0007ACFC
ImageSize: 00079000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please remove it or update it from the following link.

NI Measurement Studio - National Instruments

EDIT, there is a fix you can download which prevents file corruption, if you can't find an updated driver then download this.

http://digital.ni.com/public.nsf/web...C?OpenDocument

3 more replies
Answer Match 39.06%

Hi all,

i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

"event log service is unavailable. verify that the service is running."

so i try to start the event log service, from the services.msc program;
whenever i try to start windows event log from services i get the message:

"Windows could not start the windows event log service on local computer.
Error 3: The system cannot find the path specified."

how can i specify the path?
or
how can i resolve the problem?

any help would be appreciated please---thanks

A:Unable to start event viewer/event log service on vista

By the way the OS is a Vista Home Prem without SP1. and i have searched this problem extensively, finding no solutions.

If anyone has any advice it would be greatly appreciated.

19 more replies
Answer Match 39.06%

So basically my pc restarts whenever it wants its getting really annoying, it comes up with serious error and it either says its device drivers or ram, but ive tested my ram with the windows diag and mem test with no errors, and ive updated all my drivers, so im not sure, any help would be muchly appreciated,

this is from the event viewer, ill have to post a copy of my next serious error report and anything else that would be helpful, thanks and plz plz plz help


Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 4/21/2007
Time: 2:34:13 AM
User: N/A
Computer: EZMIKE
Description:
Error code 1000008e, parameter1 c0000005, parameter2 805607c5, parameter3 f3283a84, parameter4 00000000.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 38 1000008
0020: 65 20 20 50 61 72 61 6d e Param
0028: 65 74 65 72 73 20 63 30 eters c0
0030: 30 30 30 30 30 35 2c 20 000005,
0038: 38 30 35 36 30 37 63 35 805607c5
0040: 2c 20 66 33 32 38 33 61 , f3283a
0048: 38 34 2c 20 30 30 30 30 84, 0000
0050: 30 30 30 30 0000
 

A:System Error - Event Category (102) - Event ID 1003 Windows OS

got these last 4 minidumps too
 

3 more replies
Answer Match 39.06%

It's been a while since I've experienced a BSOD as I'm viewing a video on youtube. It would freeze as if the audio was caught in mid-stream then BSOD, then would restart automatically. I go to Event Viewer after windows as loaded and I see Event 41 Kernel-Power in there.

I had this issue before and we found out that the motherboard was causing the issue. I have also replaced my video card and added additional memory and expanded to 16gb. Before, I only have 8gb.

Ran sfc/scannow with no errors found. Going to do chkdsk as well.

It's strange because this does not happen at all when I'm playing online games or even just standard browsing. It's when I play videos on youtube that there would be instances where this would happen. There are other times where I can view them without any issue at all.

Any ideas would be great.

Also, how can I attach the windows DMP file to scale it down as it is just really large?

Thanks again guys.

A:BSOD when watching videos on youtube, Event 41 in Event Viewer

Hello Santos, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

9 more replies
Answer Match 39.06%

Good Evening,

My PC is steadily failing with a variety of blue screen errors -

----------------------------------------------------------------------------------------------------

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 07/10/2010
Time: 00:06:29
User: N/A
Computer: PHIL-E2A3E8C94F
Description:
Error code 1000000a, parameter1 806f8360, parameter2 000000ff, parameter3 00000008, parameter4 806f8360.

Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 30 1000000
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 38 30 eters 80
0030: 36 66 38 33 36 30 2c 20 6f8360,
0038: 30 30 30 30 30 30 66 66 000000ff
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 38 2c 20 38 30 36 66 08, 806f
0050: 38 33 36 30 8360

----------------------------------------------------------------------------------------------------

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 06/10/2010
Time: 22:23:54
User: N/A
Computer: PHIL-E2A3E8C94F
Description:
Error code 10000050, parameter1 e4733000, parameter2 00000000, parameter3 80582627, parameter4 00000001.


Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 35 10... Read more

A:System Error - Event Category (102) - Event ID 1003 Windows OS

are these errors occurring out of the blue or do they happen when you run certain things? did you recently install new drivers or updates? posting the full specs of your machine and which operating system would also be helpful.
 

5 more replies
Answer Match 39.06%

System event not recording anything. It is empty, says "date is invalid(13)".

I have some flaky things going on like unexplained CPU spikes causing slowdowns and mouse drag. Also have video problems screen going blank then recovery.

I have reloaded video drivers to no avail. No system lockups or BSODs. I need to see system event log to debug. Other event logs OK. I am proficient on PC and have searched for event log problem. The Event Log service is running. Thanks.

hp pavilion dv9000
OS Name Microsoft Windows Vista Home Premium
Version 6.0.6001 Service Pack 1 Build 6001
Processor Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1801 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Hewlett-Packard F.23, 10/3/2007
SMBIOS Version 2.4
Installed Physical Memory (RAM) 2.00 GB
Adapter Type GeForce 8400M GS, NVIDIA compatible
Adapter Description NVIDIA GeForce 8400M GS
Adapter RAM 128.00 MB (134,217,728 bytes)
 

A:Solved: Vista, Event Viewer - system event log not recording

Did you check the - %SystemRoot%\System32\Winevt\Logs\System.evtx file? It may be corrupted and you may want to rename it to .old and let it recreate itself.
 

2 more replies
Answer Match 39.06%

After too many unexplained problems, I decided to reinstall Windows 8.1 Pro x64, and migrate off of SBS 2011 Standard. In addition to the primary workstation that can't read any event logs, I built five Server 2012 R2 servers (Hyper-V host, Active Directory
VM, Exchange 2013 VM, SQL Server 2014 VM, and WSUS VM).

I was diagnosing why my workstation's Outlook cannot reach the local Exchange Server.   I tried to look at the event logs, and found the
Event Viewer cannot open the event log or custom view.  Verify that Event Log service is running (it is) or the query is too long (whatever that indicates).  The request is not supported (50)
Looking at the directory of the event logs folder.  It appears that most logs are empty, which is understandable since it's a rebuilt installation.  I found a small number of Applications and Services Logs and it appears nothing was logged since
six days ago on 4/4/2016.   On support forums, I found many have this exact problem on Win 7, Win 8, and Win 10.  Of the solutions posted none of them would even execute on my Win 8.1 Pro x64 machine.  I tried clearing the event logs (WEVTUTIL
CL logfilename) and am told Failed to clear log .... The request is not supported. 
It's very difficult to diagnose why Outlook 2013 cannot reach Exchange 2013, even if Outlook is installed on the Exchange server machine (just as a test).  The web-based Outlook owa, ecp, ... all work fine. ... Read more

More replies
Answer Match 39.06%

no info comes up with diagnosis/analysis for this URGENT item in Event Log...was directed to you for further assistance.      Add'l/same problem w/Event ID 100. Please advise ASAP?  Tnx, Karen

 

More replies
Answer Match 39.06%

EDIT: ARGH, sorry, meant to post this in General Discussion forum, I have no idea if it is a network issue.

Hello everyone,

I keep seeing this error appear several times a day, even during idle, in my Event Viewer. I did a clean install of build 10586 less than a month ago. I'm not having any overt issues yet, but the error is disturbing.

SettingSyncHost (9144) {979B90BD-0F81-4D83-B038-62032DD17C47}: Database C:\Users\xxxxx\AppData\Local\Microsoft\Windows\SettingSync\metastore\meta.edb: Index deleteDetection of table items is corrupted (0).
I have spent a few hours researching this and I can't find any reports of similar issues or even what the file metastore\meta.edb is for. Is this hopefully one I can just rename and it'll automatically create a new one?

More replies
Answer Match 39.06%

Out of the blue I get 3 event errors when I boot up my Home Premium 64 bit. First time in two years.

Event ID 7006:
The ScRegSetValueExW call failed for FailureActions with the following error:
Access is denied.

I don't have AVG. I have Agnitum Firewall, Panda Antivirus (Free).

Event ID 7009:

A timeout was reached (30000 milliseconds) while waiting for the IPsec Policy Agent service to connect.

Event ID 7000:

The IPsec Policy Agent service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.

When I checked the windows services table, I noticed that IPsec has in fact been started but probably not in a timely fashion. How do I get rid of these 3 annoying errors although I don't notice any performance problems in my laptop?

Thanks in advance for your help.

A:Three event errors on bootup: Event ID 7006, 7000 and 7009

Hi Atom.

"Event ID 7006:
The ScRegSetValueExW call failed for FailureActions with the following error:
Access is denied."

These events are normal because of Panda Cloud Antivirus' self-protection feature.

"Event ID 7009:

A timeout was reached (30000 milliseconds) while waiting for the IPsec Policy Agent service to connect."

Follow the instructions from here:

Event ID 7009 — Basic Service Operations

You can put new value as 60000 instead of 30000.

The Event ID 7000 should disappear when you boot your laptop next time.

Hope this helps.

1 more replies
Answer Match 38.64%

If a make a password mistake when logging in, event viewer should log event with ID 4625*. But it doesn't. How do I get it too? If you want to know about my computer model Etc. Click on the computer icon next to my name.

(*Event 4625 means Bad password)

Thanks
 

A:Solved: Event ID 4625 not being logged in event viewer

I assume you are using Vista or Win 7

The following eventIDs are all related to Login Failures:
4625,4626,4627,4628,4630,4635,4649,4740,4771,4772,4777
 

2 more replies
Answer Match 38.64%

I have noticed these in my event viewer appearing a lot and roughly around times when my computer decides to freeze up on me.

Event ID 7001, Service Control Manager
The Peer Networking Grouping service depends on the Peer Name Resolution Protocol service which failed to start because of the following error:
%%-2140993535

&

Event ID 7023, Service Control Manager
The Peer Name Resolution Protocol service terminated with the following error:
%%-2140993535

A:Event ID 7001 and 7023 Shows in Event Viewer a lot.

Just FYI - I usually ignore these errors when they show up.
BUT, if they're associated with freezes we'll need to have a deeper look.

Please post this info even though you're not reporting BSOD's: http://www.sevenforums.com/crashes-d...tructions.html

7 more replies
Answer Match 38.64%

From what I understand about the event log in Windows 7, when someone tries and is unsuccessful when logging into the computer the event log should record an event id 4625. However this is not happening at either of my Windows 7 Ultimate machines. I found an identical thread about this problem where the user found a solution but did not specify what is was.

http://forums.techguy.org/general-security/995501-solved-event-id-4625-not.html

Any ideas?

Thanks
 

A:Solved: Event ID 4625 not being logged in event viewer

Are you creating a Custom View ? Be sure that you have selected 'By Log - Event Logs: Windows Log, Security. Then except for the Event ID field, everything should not be checked.
 

3 more replies
Answer Match 38.64%

A fatal hardware error has occurred.

Reported by component: Processor Core
Error Source: Machine Check Exception
Error Type: Bus/Interconnect Error
Processor APIC ID: 2

The details view of this entry contains further information.

I run a Cyberpowerpc with an AMD FX(tm)-4130 Quad-Core Processor 3.80 GHz
I have WINDOWS 8.1 NOT 7, NOT 10, NOT VISTA, 8 EIGHT

More replies
Answer Match 38.64%

My Win 7 Pro x64 system just started acting up. When I select an event in the Event Viewer, the More Information: Event Log Online Help link doesn't open IE10. When I click on the link, the Event Viewer pop-up confirmation box open to confirm sending information across the internet, but when I click "Yes" the box goes away and I get a momentary indication from the cursor that the action is processing then nothing. It will not change the active IE10 page or open IE10.

Is there a solution with out a system restore?

Thanks in advance for your assistance.

Regards

A:Event Viewer Event Log Online Help Links don't function

I don't know much about this kind of stuff - but here is what I dug up using Microsoft's Process Monitor and Process Explorer.

The mmc app (event viewer) sends info to one of the svchost instances (netsvcs).

Svchost writes some info to the registry about a scheduled task and then runs that task.

This starts taskeng - which starts wscript.

Wscript runs a temporary VBS file that is supposed to send a URL to the operating system (shell).

The OS is supposed to open your default browser.

Here is the contents of the VBS file from my testing:

Code:
Set shell = createobject("wscript.shell")
Shell.run """C:\Users\username\AppData\Local\Temp\tmp78C0.url"""


You might try SFC /SCANNOW Command - System File Checker

And let's hope that some other forum member can suggest things that you should check.

4 more replies
Answer Match 38.64%

I tried a lot, but couldn't find the event log for the cleanmgr.exe (Disk Cleanup) in the Event Viewer.
Actually, I need the source & event id of cleanmgr.exe to schedule a task in the Task Scheduler.

A:In Event Viewer, Where is event log for cleanmgr.exe (Disk Cleanup)?

This Article would be of services to you .

3 more replies
Answer Match 38.64%

Hi all,

I'm having an issue with an Events 1001 and/or 902 crash when I run GTA V it occurs at random times, and without warning. I've reset Windows 10 Pro, uninstalled and reinstalled the game but I keep getting the crashes. Windows 10 Pro should be up to date, I have my doubts about my mouse as the manufacturer hasn't released updated drivers in some time, and the rest of my peripherals/utilities should be up to date. Thanks in advance

A:Event 1001 and Event 902 at Random times while running GTA V

Hi,

Try updating your network driver (iqvw64e.sys) here: -

https://downloadcenter.intel.com/

0 more replies
Answer Match 38.64%

I am getting lots of critical errors in the event viewer. Event ID = 100, 200, 400, 307, 402.... (Below are the details for a couple of them). I have seen several posts on the web for this issue but no solutions. It seems to be an issue that affects a lot of vista installs on all different pc / laptops. I'm running an IBM (lenovo) T61 laptop. I don't know if these issues are related but frequently when I reboot the laptop it will hang during the boot up. When this happens I need to Hard Boot the laptop, I will then get the message that windows did not shut down correctly and asks to 1) run a repair restore or 2) boot window normal. Sometimes I need to do this several times before it will boot up. I?m afraid the day is coming where it will not boot up at all.

I would appreciate any information someone might have.

Thanks...

****Event ID = 200****
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 1/26/2009 9:02:57 AM
Event ID: 200
Task Category: Shutdown Performance Monitoring
Level: Critical
Keywords: Event Log
User: LOCAL SERVICE
Computer: xxxx
Description:
Windows has shutdown:
Shutdown Duration : 153587ms
IsDegradation : false
Incident Time (UTC) : 1/26/2009 3:17:21 PM
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windo... Read more

A:Boot up Issues - Critical Event Log errors - Event ID = 100, 200, 400, 307, 402

Originally Posted by mehowe


****Event ID = 400****
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 2/15/2009 9:51:42 AM
Event ID: 400
Task Category: System Performance Monitoring
Level: Critical
Keywords: Event Log
User: LOCAL SERVICE
Computer: xxxxx
Description:
Information about the system performance monitoring event:
Scenario : System Responsiveness
Analysis result : Analysis could not be performed in time. There is a possible serious performance issue
Incident Time (UTC) : 2/15/2009 2:49:26 PM
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Diagnostics-Performance" Guid="{cfc18ec0-96b1-4eba-961b-622caee05b0a}" />
<EventID>400</EventID>
<Version>1</Version>
<Level>1</Level>
<Task>4005</Task>
<Opcode>37</Opcode>
<Keywords>0x8000000000010000</Keywords>
<TimeCreated SystemTime="2009-02-15T14:51:42.799Z" />
<EventRecordID>1693</EventRecordID>
<Correlation ActivityID="{00000000-A6C8-0000-2155-6BAA7B8FC901}" />
<Execution ProcessID="2016" ThreadID="2216" />
<Channel>Microsoft-Windows-Diagnostics-Performance/Operational</Channel>
<Computer>xxxxx</Computer>
<Security UserID="S-1-5-19" />
&l... Read more

1 more replies
Answer Match 38.64%

While playing war thunder on steam my screen went black and i couldn't do anything. I restart my computer and play again it crashes. After one more time i look at my event viewer and find critical error event ID:41. I don't whether its the game or my pc.

A:BSOD playing war thunder, Event viewer event 41

Critical error - Event ID 41 is (most likely) when you forced the system to restart (usually by holding the power button down).

You have a NETGEAR WG111v3 Wireless-G USB Adapter:





I do not recommend using wireless USB network devices. Especially in Win8/8.1 systems.
These wireless USB devices have many issues with Win7 and later - using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win8/8.1 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.



I noticed that you don't have Secure Boot and/or UEFI enabled. If you were having problems with it and changed it, please let us know.





It's not necessary to enable it now. But, should you reinstall Windows at some point in the future, please enable it first.

I mention this because it may happen that (one day) the system won't boot. This can be caused by a program changing your UEFI settings, or an update of the UEFI resetting it to default values.

To test and see if this is the cause, boot into the UEFI and see if the settings have been changed. If uncertain, try with Secure Boot both on and off (and the UEFI on UEFI or Legacy (CSM))

If it still doesn't boot after trying this, then move on to other troubleshooting tools as it's not likely to be due to this.



Black screen errors are not... Read more

1 more replies
Answer Match 38.64%

I am having problems powering on from sleep using Ps2 or USB devices or scheduled wake event. When I press the space bar or mouse button to wake nothing happens except I hear a short click sound (from motherboard) and the hard disc LED comes on for a split second. The second time I press there is no sound or LED flash. Same thing happens with a scheduled wake event from Windows 7. I also get this happening when I quickly press and release the power on button. When I press the power on button for longer than about 1/4 sec (guessing) then the PC comes on. This problem seems to have happened after upgrading to Windows 7 (from XP Pro). I checked the Bios and wake with PS2 devices was on. Also checked Device Manager Power Management for the mouse and keyboard and wake from sleep was on. Also checked power management options and ?allow awake timers? is checked. It appears the wake event is happening but the duration of the momentary on mechanism is not long enough to actually turn on the PC.

A:Can't wake PC from sleep PS2, USB or scheduled event - event triggers

Found the problem - it was a dying CMOS battery

1 more replies
Answer Match 38.64%

I wanted to see who was viewing my computer and went to event viewer, under System > filter current log > power troubleshooter -- I found that the wake source for the system resuming from sleep was a device usb root hub, what does this mean?

More replies
Answer Match 38.64%

Every time I boot my laptop I get error message Event ID 10 in Event Viewer. The details are:

Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor"AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.

I do believe that the error message is nothing to be concerned about from what I have read when I googled it, but nothing I read tells you how to get rid of it. Does anone know how I can get rid of this so it does not show up in event viewer everytime I boot?

A:Event Viewer Error Message Event ID10 - How to get rid of it?

idahosurge,
Read through the link below...
Hope it helps with your problem.

Event ID 10 is logged in the Application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2

5 more replies
Answer Match 38.64%

Hi,

My computer runs for all practical purposes I guess but I can certainly feel that there is good reason for all event log errors while working on my windows 7. For example, the blue screen of death appears once every 3-4 months, or earlier today the computer just started getting really slow (given my 8GB memory this raaarely happens), or "windows explorer" would randomly crash (however, when this does happen it usually happens just once during a session then it restarts and it's fine so it's not preventing me from using my computer it's just...something's wrong and it shouldn't be and I want to fix it! )...I have rows and columns of event log errors such as event ID 1000, event ID 80, 1001, 1002, and much more but since addressing all of them at once will probably invade the entire forum, I prefer to address them perhaps in little bundles so I don't annoy the experts and exploit the resources.
Also, I have a feeling that once I start fixing some of them, many others will disappear automatically. I'm sorry if my post is a bit vague but this is my first time here so please be patient with me and just tell me whatever information you need from me to narrow things down and I will do that.

I have provided a link to a few of my event logs to OneDrive which I appropriately labeled to make it easier to distinguish which one is which.

http://1drv.ms/12mlhJJ

Thank you so much in advance.

A:Event log swarm! Including event ID's 1000, 80, 11, 1001+2, etc...

Hello and welcome Allen mate just to try a few rather obvious bits and pieces and to start eliminating stuff run these the first two in safe mode if you have to then the malwares as long as the machine keeps running.

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < use the /f and /r options in Option2 if necessary

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

download from bleeping computer ? delete any rubbishthese find.

I must say it is refreshing to find that a member has included the system specs for a change - well done!

3 more replies