Tech Problem Aggregator

Solved: Lose connection with netgear router, with multiple devices???

Q: Solved: Lose connection with netgear router, with multiple devices???


This is my first post so please be gentle, I have a Netgear DG834GT connected to Talk Talk with a WEP security key, I have 1 desktop, 1 laptop, ps3. ipod touch and iphone all using it wirelessy, there all connected to my home network, but its pot luck if you can connect to the internet at any time with any off them, it seems to be whatever is connected first is ok, whatever trys to connect to 2nd or 3rd and so on is pot luck, or the connection may even drop, please help.

A: Solved: Lose connection with netgear router, with multiple devices???

16 more replies
Answer Match 110.7%

I have 7 devices connected to my Netgear Router 600/3700v2 and the devices keep disappearing. I believe I have found the solution. Connect to your Netgear Router (you will see BASIC and ADVANCED options) and select the ADVANCED settings. Click the tab below ADVANCED SETTINGS and in the drop down menu select UPnP. You will see on the top of the screen ADVERTISEMENT TIME TO LIVE - this setting DEFAULTS TO "4" which is okay for "normal" home use (well, it didn't work for me). This setting is what controls your attached devices. If you keep losing them, try increasing the settings until they remain visible. I tried 5 first - no go. Then I tried 8 and I haven't lost the devices since. Hope this works for you!

More replies
Answer Match 96.18%

-Here is my setup so far. I have a vista machine with 2 lan cards, one from motherboard, one on pci. The lan from motherboard is connected to the WAN port on my router. I have alltel wireless internet that uses ICS through that. The lan card on my pci bus is connected to a LAN port on the same router. When i am not using ics i disable the lan on my motherboard and vice versa. I am using the second LAN on my pci bus that is connected to one of the LAN ports on my router so my computer can use MCE and DIRECTV2PC. I have another line connected to a LAN port on the same router going to a switch which is connected to my 360 and my directv receiver.
-Here is the problem. Say im using DIRECTV2PC and the xbox gets turned on, what happens is i lose connection to my directv and my computer only sees the xbox and vice versa. I am confused on why that is, it should see both at the same time and not lose connection to any one of them right?

A:I lose connection to some devices on my switch connected to my router.

whoa man never heard of that kind of set up before. try connecting your internet to the WAN port on the router and connecting the rest of your stuff to the inputs on the router. its a little less complicated this way.
sounds like your computer is controlling your internet and getting confused... hope this info is usefull.

2 more replies
Answer Match 84%

This is my first post and glad to be here among experts. I will list my issue, please tell me what information you need to be of assistance.

I have a net gear WNR2000vs with the latest firmfware to date. I have two wired devices connected: 1. my pc 2. xbox, and also one wireless device connected 1. my cell phone via wi fi.

Before I updated the firmware:
I would hard wire my 360 and pc to the router together. My 360 online play would work fine for about 10 minutes then my connection on my 360 and pc would drop. My network status would say 'resolving issue'.

After updated the firmware:
I now have my 360 and pc hard wired to the router together. These two seems to work fine together. When I try to connect a wireless device my connection drops. My pc resolves the issue and regains connection, but if I try to navigate a webpage or download anything from the wireless device then it starts the whole dropping connection thing again.

I'm not sure what information you guys would like but here's some basics. Thanks!

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) II X4 965 Processor, AMD64 Family 16 Model 4 Stepping 3
Processor Count: 4
RAM: 8190 Mb
Graphics Card: ATI Radeon HD 4600 Series, 1024 Mb
Hard Drives: C: Total - 305142 MB, Free - 100720 MB;
Antivirus: Kaspersky Internet Security, Updated and ... Read more

A:Net gear router losses connection when multiple devices are connected

11 more replies
Answer Match 78.96%

I have a Paradyne DSL modem connected to a Netgear WGR614 wireless router. This set-up has been working great for over a year.

A couple of weeks ago, my DSL (or so I thought) quit working while I was using it. No big deal, I just let it be, thinking it would be up the next day. Next day, same thing, so I started the normal troubleshooting. Everything looked like it should, so I connected directly to the DSL modem and everything worked fine. I decided my Netgear had bit the dust, even though everything looked good. I tried another router and had the same results, so I purchased a new Netgear because I wasn't sure of the configurations for the second router. Same thing.

In order to connect the modem directly to the computer, I have to enter the IP, Gateway and DNS numbers in my PC, so I know my numbers are still valid. Any ideas as to why my DSL will no longer work through a router? I can access the routers internal configuration from my pc, so I know the connection between those two are good. When I set the Netgear back to factory defaults, it was able to detect what type of connection I have, so I assume the connection between the modem and the Netgear is good. I tried disabling my firewall temporarily. I am at a loss as to what to try next. I know several people who have the exact set-up at their homes and are working fine.

The troubleshooting was performed on my wired Windows XP Home desktop; however, I also tried wireless with my Windows XP Professional laptop.
... Read more

A:Solved: No DSL Connection with Netgear router

7 more replies
Answer Match 78.12%

Hello all,

I have a Netgear wgr614v7 wireless router that has been working perfectly for a couple weeks now, but I have suddenly run into a problem. For some reason, I can now only connect one laptop at a time to the network. When I try to connect a second laptop, it says, "Windows was unable to connect to [network name]". When I try to connect with my Macbook, it says "network timed out". Before, I was able to connect all three without any problems.

Any ideas?


A:Solved: Netgear router suddenly allows only one connection

Make sure the modem is connected to the router's WAN port.

Reset the router to factory default settings (and reconfigure it if the problem disappears).

3 more replies
Answer Match 78.12%

currently i use Netgear DG834G v5 router and i am unable to access the internet both wired and wireless.i used this router since november and this is the first time i have these prbs. i contacted my internet provider and they checked the line and they said that is working properly. i changed the dns servers and the problem remains unsolved!i only have access on the internet only when i restart the router and for the next 10-15mins.i used the cmd to check and it says req.timed out or received 0 % loss i dont know if there is something with the firewall. i recently changed the antivirus from norton to avira but i didnt have any prbs when i changed it.
what do u think?
thanks in advance!

A:Solved: Netgear router-internet connection

16 more replies
Answer Match 77.28%

Hi - my first post so please be kind. I have searched for a previous answer, but similar ones all seem more complex problems than mine!

I am running XP on my PC and connecting to the Internet with a Netgear 54 Mbps Wireless ADSL Modem Router DG834G v3.

Most of the time it is fine (and it also runs a second PC upstairs through the wireless network OK).

Then about once or twice a day, the Internet light goes from green to orange, flashing on and off for about 10 seconds, then off altogether for a few seconds, then flashing orange again and so on. At this point if I click on the Internet connection symbol in the bottom right hand corner of the screen (task tray?) it tells me I am connected, but with no speed, and I can't access any websites.

If I try the connection diagnostics in XP, it tells me to check the wires, turn the modem off and on again, but when that doesn't work just tells me to contact my ISP.

Each time this has happened I have tried re-booting the PC, and tried turning the power to the router/modem off for a few minutes and back on, no luck, and then eventually, for no apparent reason, the link seems to recover itself and I am back online. (This morning it took about 30 minutes)

We get our Internet through overhead telephone wires (no cable out here in the sticks) and the best speed I ever show on teh connection status screen is 2.5Mbps, but often much less.

I suppose my real question is this: Is the problem likley to bewith my Router/modem? Or is ... Read more

A:Solved: Netgear Router dropping Internet connection

6 more replies
Answer Match 76.44%

I have a Covad DSL modem and a Netgear wireless router. I had the internet connection set up using an ethernet cable connected to a desktop computer, with several wireless laptops on the network. Now my desktop has crashed (not worth fixing), so I set up the same connection on a laptop, but it is now tethered by the ethernet cable to the modem, and therefore anchored to a desk. Can I reconfigure to set up all computers in my home wirelessly, or must one always be connected with the ethernet cable? The laptop it is currently set up on is a hp pavilion with Windows Vista.

A:Solved: help setting up a netgear router without ethernet cable connection

7 more replies
Answer Match 71.4%

My internet connection frequently drops out.
If i go and change my wireless (internet) cards IP address by one number (ie to it fixes the problem.

Its like XP uses the most recently changed connection to access the gateway??

Can i set one Adapter to be the default?

What is the problem??


I have 3 network cards in my XP pro box.
1 wireless to adsl modem on 192.168.1.*** subnet
1 ethernet 10/100 card to networked Printer on 192.168.2.*** subnet
1 ethernet 10/100 card to nearby laptop on 192.168.0.** subnet

Gateway on all adapters is set to

Rowan from Oz

More replies
Answer Match 71.4%

I have two computers running Windows XP networked through a D-Link DI 604 Broadband Ethernet Router, which in turn is connected to a Siemens Speedstream 4100 Ethernet ADSL Modem. I continually lose the connection and have to press "reset" on the router (actually insert a paperclip into the reset hole.) The period of time that it stays connected can vary from a few minutes to several hours but is usually about an hour. Occasionally I will need to repeat it a time or two before it connects. I bought the router two or three years ago and had the same problem then but I moved and haven't had it or my second computer connected to the internet until yesterday when, of course, it started doing the same thing it had before. Do I need to replace the router or might it perhaps be caused by a setting? I am, unfortunately, in a state of blissful ignorance about networking. Thanks.


A:Regularly lose connection through D-Link router

10 more replies
Answer Match 70.56%

Hello and thank you for taking the time to look at my issue.

I have 2 laptops and 1 desktop all connected to the same router, the 2 laptops are connected via wifi and the desktop PC is currently connected via an Ethernet cable, both laptops run windows 7 while the desktop runs windows XP and more or less every time the desktop is booted after a few minutes of normality connection to the internet is lost and the yellow triangle on windows 7 appears so to fix this I have to go into my routers settings via and reboot which then solves the problem and all machines function as they should including the desktop.

this initial disconnection is very annoying as you can imagine and I am fed up with having to reboot my router every time the desktop is turned on, there have also been past occurrences of an IP conflict but these alerts have not occurred for some time but I thought I would mention this in case it is of any significance. Many thanks

A:computer causing router to lose internet connection

Strange issue. Try these "routine" fix attempts ...

Make sure you have the latest correct ethernet driver for the desktop. If you already have it reinstall it anyhow in case the installed instance is corrupted.

Make sure you have the latest router firmware; then reset it to factory defaults and reconfigure it.

2 more replies
Answer Match 69.72%

My network has 3 computers connected through lan cables to an IP switch that connects to the gateway. The gateway is running the latest m0n0wall -1.33. I just got and connected a wireless router to my network (4th lan position on the switch) - setting it up as an access point. As soon as the router turns on, the wireless devices connect but the WIRED comps lose connection. My wired comps are running Win XP sp2. The wireless devices are a laptop running Windows 7 Home Premium 32 bit and an iPhone. Any advice?

A:Wireless router causing wired computers to lose connection.

Hi Tron and Welcome to SF,

Looks like the Gateway is also a router then you added a second router.

Might need to reconfigure the 2nd router, the Gateway's setting stays the same. Disable DHCP from the 2nd router and assign a Static IP Address to the second router with the same Subnet for ex. Gateway's IP is, you may assign a Static IP to the second router.

See if that helps and let us know.

9 more replies
Answer Match 68.88%

I am using a Netgear router on a wireless system. I installed everything correctly and it was working fine, until now. My laptop computer now instead of linking to the "NETGEAR2" network, links to the "linksys" network. How can I make it switch back?

A:Netgear Router connection

7 more replies
Answer Match 68.88%

Hi. As of the last month or so, I have been noticing very irregular problems with my internet connection. Sometimes at very random occasions, my computers internet is cut out. If I disable and re-enable my network LAN adapter, the problem automatically fixes itself. However, perhaps a day down the track or a few hours later, it may happen again. Lately the problem has been becoming increasingly abnormal. I've been noticing slower speeds on World of Warcraft (the online game I play) as well as random disconnects from it. I've also noticed as of late some disconnects from Ventrilo on its own (being unable to connect back to it for a couple of minutes). During these times, sometimes either all of the internet on my computer or simply some programs and websites wont load. (For example, during a time when I was getting extremely frequent disconnects from World of Warcraft, I was also finding it tough to get a good connection to the affiliated websites with the game). Today I logged into my router and had a look at the logs, and noticed that there were alot of very unusual pieces of information which said "DoS Attack". For example, here is just a couple from the log: [DoS Attack: RST Scan] from source:, port 49810, Wednesday, December 01,2010 10:55:46[DoS Attack: RST Scan] from source:, port 3724, Wednesday, December 01,2010 10:55:07[DoS Attack: RST Scan] from source:, port 44049, Wednesday, December 01,2010 10:54:52[DoS At... Read more

A:Multiple DoS Attacks in Netgear Router Log, Unusual Internet activity

I cant imagine why someone would attempt to DDOS you. Are you using any torrent or P2P apps?

45 more replies
Answer Match 68.46%

Slowly lost app's now have no control. Or admin privilege. The screen looks fake. There's drives listed I can't access. And every download was hijacked. Now theres no real Network or bios driver installed. after multiple attempts and no system functions available I want to use another computer and try to download virus software there. Noticed something strange happen and both laptops havea Dll bug long story short my Android, laptops, printer and router have all been hijacked and I do not know what to do at this point

I haven't seen or been able to find anything on something so expensive enedina have any other laptops that are accessible at this time so even doing it from my phone is challenging

More replies
Answer Match 68.46%

Hey guys, wondering if anyone can help me with an issue in having. I have a Netgear wireless router (can't remember model, CGD or CGN something I think) and I'd like to set up a wired connection, the PC is right next to the router/modem and I'd enjoy having the slightly better download speeds with wired however, just plugging in an ethernet cable does nothing (surprise surprise). When I first tried I got Error 651, by fixing up the drivers with a Vista one I got past that but now I'm getting Error 797, I'm stuck here, I have no idea what to do. Any help?

A:Can I use a Netgear router for a wired connection?

Try to access the routers setting page over the wireless, usually for netgear its or, and log in using your user and password given to you. Some routers (especically Netgear) will disable ethernet ports unless you specify otherwise for whatever reason. Ususally there is a setting in the router control panel to enable them. Wish you luck

1 more replies
Answer Match 68.46%

I am trying to set up WPA security on my new Dell Inspiron Laptop,

When I go to "Help and Support" for instructions it says:

"The Set Up a Network wizard will guide you through setting up a security key.

Click to open Set Up a Network."

My problem is when I "Click to open Set up a Network" it only shows my neighbor's router [A Linksys WRT110]. My Netgear WGR614v6 does not show up as an option to connect to.

How may I resolve this issue?

Thank you

A:WPA connection to my Netgear Router does not appear as an option


Is your router currently broadcasting a wireless signal? If it is, is "Broadcast SSID" or similar turned ON?


5 more replies
Answer Match 68.46%

currently i use Netgear DG834G v5 router and i am unable to access the internet both wired and wireless.i used this router since november and this is the first time i have these prbs. i contacted my internet provider and they checked the line and they said that is working properly. i changed the dns servers and the problem remains unsolved!i only have access on the internet only when i restart the router and for the next 10-15mins. i dont know if there is something with the firewall. i recently changed the antivirus from norton to avira but i didnt have any prbs when i changed it.
what do u think?
thanks in advance!

A:Netgear router-internet connection

closed continue here

1 more replies
Answer Match 68.46%

O/S windows vista. I am trying to connect to the wireless internet through the Netgear router my roommates have at my new place. All of their devices work using the passphrase, but when I try to connect, in my network and sharing center it says that it is connected to their network (which shows up as unidentified) but not connected to the internet. I have tried resetting the router, as well as unplugging it and plugging it back in. When I called Netgear, they said they could fix it, but that I would have to enroll in their $150 per year tech support plan. Any free fixes?

A:Netgear router connection issues

Have you checked your network connections are all set to Auto:

Start>>Control Panel\All Control Panel Items\Network and Sharing Center

Top Left >Change Adaptor Settings
Select: Wireless Adaptor>>right click and select properties

Internet Protocol Version4 (TCP/IP)

Select properties and make sure that:

Obtain Ip Address Automatically
Is selected
and also

Obtain DNS Server Address Automatically
Is selected

Worth a shot, but post back if the above is already in the preferred state.

2 more replies
Answer Match 67.62%

I have a NetGear FWG114P Router with a desktop PC, an IOMEGA backup drive, and printer all pugged directly into the router. I also have a Dell laptop with XP SP2 and a NetGear wireless G card. The router drops the connection to the laptop very frequently. The connection to the desktop and the printer have no issues and the connection going from the laptop to the router is fine. The only way to restore the connection is to re-boot the laptop or the router. I have tried everything to eliminate the problem as it has lasted for several years. Upgrading the firmware on the router, buying a new 5.8Ghz phone, and installing a more powerful antenna to boost the signal, have not made a difference. The signal strength is consistantly strong, so I know that is not the issue. Recently I tried something that did work but I do not understand why. I keep a browser session open to maintain a connection from the laptop to the Router - specifically when I boot up the laptop I login to the router and keep it logged in the entire time I am on the laptop. That way my connection to the router does not drop. I would much rather find the real cause of this problem. Any ideas?

A:NETGEAR Router drops wireless connection

It seems that no one ever responded to your post. However, I can vouch for exactly your experience. I bought my FWG114P after my previous FM114P failed suddenly after about 3 years. I wasn't happy about it failing but it was reliable as long as it ran. But the FWG114P is anything but reliable. I'm on my first replacement now and it drops the wireless signal randomly and for random periods of time just like the first one did (it does seem to come back of its own accord most of the time, without a computer or router reboot). I have given up trying to get Netgear to admit that there is some fundamental problem with the wireless function of this device, basically because I don't want to hear them tell me one more time that it must be interference (obviously interference that just happened to start when I bought the first FWG114P!). Even pointing them to various forums where people are complaining about exactly this problem doesn't seem to make any difference! I haven't bothered getting a third machine because I know it will have the same problem. Yes, it's disappointing and frustrating.

2 more replies
Answer Match 67.62%

Hey Gang,
I have a Netgear WNR1000v3 router. I have two computers connected with a wired connection and a couple of different devices that I connect with using the wireless connection. (Phone, Laptop, Ipad). The wired connections work fine but the wireless connection will only connect to the internet for a very short time (seconds) and then drop off. If I wait long enough I will pick it back up again. But again, for only a very short time. I have tried all the reboot procedures without any success. If I reboot the laptop, Ipad, etc., that seems to get me a connection, again for a very short time. I've checked the lights on the router and everything there says its OK. It seems to have to difference how far I am from the router. I've put the computer right next to it without success. Is the router going bad? It's only about 4 months old. Because I don't use the wireless feature often, I can't tell you if it ever worked or not. It seems to me like I was able to keep a connection when I first hooked it up but I'm not sure.

A:Netgear Router Dropping Internet Connection

do you have any other devices near the router that could interfier with connection? anything else giving off a wireless signal, such as a cordless phone etc?
sometimes things like this can interfere with wireless signals coming from routers.

Other than that, Might be an idea to try and change the channel or your wireless signal coming from the router.

1 more replies
Answer Match 67.62%

Greetings, My Laptop will not connect to my Netgear Router anymore today. It was working earlier (that's what mum said), and then it wouldn't connect anymore. All I get is the 6 bars that is grey with a yellow sun over it and under the Network Connections it say's its "Attempting to authenticate". I don't know what happen however last night the power went out for a couple of seconds so I don't know if that played a part or not but you can't rule out anything yet. Oh and I did a hard reset on the router and modem. I even went as far as to try advice I found on google but nothing worked. I tried deleting/uninstalling the wireless card under device manager and waited for it to restart but that didn't work. I even tried a system restore and that too didn't work. I also did the whole ipconfig /release, /renew, /flushdns and nothing worked. Before some people ask this question I will answer it: I did connect ethernet cable and it did work just fine. So I'm thinking its more of the wireless card that is messing up or something like that because I can connect using the Ethernet port. I am at a lost of what I can do now. Thanks for the help to all those who reply.

A:Wireless connection not connecting to Router (Netgear)

I did another test in which I used a USB Wireless adapter (54Mbps), and It didn't want to connect. So I'm now pretty sure its a Router problem but I don't see how that could be because I did a hard reset and I did backup recovery before I did a reset so I can restore it.

Here is an image from Xiirus Wi-Fi Inspector. Please note I did change the Channel to 8 after I noticed that someone else was also on that channel.

4 more replies
Answer Match 67.62%

Hi guys,
I'm hoping someone can help with my ongoing wireless problems I'm having with Orange.
The laptops in my flat are wirelessly connected to a Netgear N150 Wireless router and the connection is forever going from little to nothing. I've tried resetting everything, getting Orange to replace the router (a new Netgear N150) but still nothing. I've tried changing channels in the past but never seems to last. I can't work out if another wireless router in another flat is chomping into our connection

Here's my ipconfig/all results:

Windows IP Configuration
Host Name . . . . . . . . . . . . : TheBashmore
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter #
Physical Address. . . . . . . . . : 8C-A9-82-0C-CF-C5
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
Physical Address. . . . . . . . . : 8C-A9-82-0C-CF-C5
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . .... Read more

A:Netgear router wifi slow/no connection

16 more replies
Answer Match 67.62%

Hey everyone,

This forum has always been helpful to me by answering the little stuff. Let's test it's limits

One of my clients has a Windstream Router that gives off the IP Address 192.168.3.X. So the default gateway for our network always has to be All hardwired computers need to have a 192.168.3.X IP. I would like this to happen with all wireless devices. I know this is possible as I have gotten close to that goal, but not perfect. This is a mystery that I need solved by smarter networking minds. I have tried Windstream support (somewhat helpful) and Netgear Support (not helpful). Here's the story:

About six months ago my clients wanted to set up Wireless. So I put in the two netgear routers with IP Addresses of 192.168.1.X one downstairs and one upstairs and all was good. Until they started to use the wireless devices more. They needed scanning, access to shared folders on our the private network and remote services...

So for the past few months I have managed to get these netgear boxes working on the network. I did this by going into the settings and setting their default gateway to and that they would give off the IP addresses instead of the Windstream box. This appeared to work fine for a few months. Until we gave them more bandwidth so that they could use their Remote Services faster. Now there are intermittent connectivity issues, Outlook disconnects, Remote Desktop constantly kicks users out, and internet is slow (not sure if t... Read more

A:Connection Issues with Netgear Router that have Private IP

If I understand what you're trying to do, set the wireless routers up on the main 191.168.3.x network, and run ethernet to the main router from their LAN, not WAN, ports. You may have to use a crossover type wire. It's the main router that will do all the DHCP work. The secondary routers are functioning as a wireless switch. See Quick Guide to Configure Wireless Router as Access Point

6 more replies
Answer Match 66.78%

I have a network with three computers:

1) XP Laptop connected via ethernet cable to the Netgear WPNT834 RangeMax 240 wireless Router - it connects to the internet, works fine. Even when I use a Microsoft wireless card (model MN-520).

2) XP compaq laptop with Linksys wireless-G Notebook Adapter with RangeBooster (WPC54GR) - it connects to the internet, works fine.

3) the problem one:
XP Computer with Linksys PCI Adapter (model WMP54G) wireless card. It can see and connect to the WEP enabled network (SSID available). I can confirm this by seeing the 'connection' on the "view wireless networks" list.

I can NOT connect to the internet with either IE or Mozilla's Firefox. The connection is intermitent at best.

I tried the Microsoft utilities to create a broadband connection, etc. and it does not work.

What to I need to do to have this computer (#3) finally connect to the internet with its wireless adapter via the Netgear RangeMax router?

Many thanks for your help. Please, try to provide details as I am not too technical.

Thank you!

A:Connection problem NETGEAR ROUTER and Linksys PCI card

First determine if the problem PC is really communicating with the router.

To open a Command Window: Start - Run – cmd (command in 98SE) - OK

To determine a computer's IP address and router's IP address: open a Command Window and type
ipconfig /all

The "Gateway" is the router's IP address.

Now for some troubleshooting:

1. On the PC open a Command window and type
ping IProuter (where IProuter is the IP address of the router)

Do you get Replies, or do you get packets lost?

If you got all packets lost, your PC and router are not communicating. Very likely an encryption problem. Try w/o encryption.

2. If you got replies, try

3. If you got replies, you have internet access, and then try\

If you get replies again, DNS is working, and you probably have a Winsock problem.

1 more replies
Answer Match 66.36%

I have tried to research this and am not finding the information I need to answer the above question so hope a networking expert can help.

I recently for the first time went over my monthly data cap for broadband and looking it to it a bit more it looks like a lot of the programs my kids are using are hogging the bandwidth. I don't really want to pay for more bandwidth (as I already pay way above average as I live in a small rural village) but I don't want to restrict too much what my kids are doing.

The solution to me seems to be to see if I can monitor and if possible control to some extent the data on each of the IP connected to the router if that is at all possible.

I have looked at my router settings and unfortunately they do not permit anything more than traffic monitoring and there are no custom firmwares to allows additional features of any use.

Is there any software that I could use to do this?

Can anybody help at all with any advice about whether this can be done?

A:Can i monitor and control multiple router connected devices data???

It is almost impossible to restrict the total usage of bandwidth. To my knowledge there are no setting for that in normal routers/gateways.

1 more replies
Answer Match 65.94%


I bought a NETGEAR RangeMax Wireless Router WPN824 but I don't get internet connect from it. I have a comast modem it's a RCA by THOMSON witch I can connect to the internet with a ethernet cable.

A:NETGEAR RangeMax Wireless Router WPN824 No Internet Connection.

The following procedure should get you a connection with any broadband modem that is configured to use DHCP for the router connection, such as cable modems, and many DSL modems. If you require PPPoE configuration for the DSL modem, that will have to be configured to match the ISP requirements.

Note that the wireless encryption and channel selection will have to be done after the basic wired connection is established, the first step is to get wired connections working.

Reset the router to factory defaults by holding the reset button down for 15 seconds with power on.
Turn off everything, the modem, router, computer.
Connect the modem to the router's WAN/Internet port.
Connect the computer to one of the router's LAN/Network ports.
Turn on the modem, wait for a steady connect light.
Turn on the router, wait for two minutes.
Boot the computer.

When the computer is completely booted, let's see this.

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

NOTE: For the items below in red surrounded with < >, see comments below for the actual information content, they are value substitutions from the previous command output!

In the command prompt window that opens, type type the following commands one at a time, followed by the Enter key:


PING <computer_IP_address>

PING <default_gateway_address>

PING <dns_servers>



Right click in the command ... Read more

1 more replies
Answer Match 65.94%

recently joined Virgin Media with the complete package. The router they gave me is a Netgear VMDG480 Router with wireless connection. However, one of the laptops will not connect to the Internet. It fails to pick up the DNS even though the laptop can see the router and makes a connection. However, on making a connection it does not pick up a DNS.

This is odd because when connected wired it works a treat.

Here is the result from running ipconfig on the wireless adapter:

Connection-specific DNS Suffix: [Blank]
Nothing for DCHP
IPv4 Address:
Subnet Mask:
Default Gateway:
Nothing for DCHP Server
Nothing for DNS Servers

This particular laptop runs Vista, and the other laptop that does work wirelessly uses XP Professional.

Does anyone have the answer to this problem?


A:Problem with Netgear VMDG480 Router and Vista Wireless Connection

16 more replies
Answer Match 65.94%

I recently added a Netgear wireless router(WNDR3400) to my Clearwire Modem and my ability to use the Desktop Remote Connection went Bye Bye. This is probably because I had to set my computer to DHCP to get the internet to work. Can any one help me with reestablishing the Remote Desktop Connection? I'm confused by the portforwarding. Do I need to forward the Clear modem to the router and the router to the computer. Do I set the router to Static IP and leave the Clear Modem to DHCP or do I need to set it to Static as well. Any help, Please?

A:Remote Desktop Connection thru Clear Modem and Netgear Router

You need to portforward (port 3389, I think) on the Netgear router to the computer. Best to assign a static IP, or use address reservation if the Dhcp server has that feature, for the computer.

1 more replies
Answer Match 65.94%

A while back my company purchased a new router (NG FVS124G) as ours was getting dated (old sonicwall, but not relevant). We received it and used all the old settings from the existing router to get it working, but no luck. We could not get it to connect to the internet, our web server would not work, and our VPN does not work either. After much tinkering, by my manager still nothing. Finally in desparation he brought in his router from home (LS WRT54G) so at least we could get up and running again. Again he loaded the old settings, and bam everything works Internet, Web Server, and VPN.

I have just recently inherited this problem, in a desperate attempt to get a more secure network going. So, this all leads to my question how is it possible the with the exact same settings one router works (WRT54G) and the other (FVS124G) does not?

We are using a static IP address.
Yes, i double, triple, quadruple checked that it all matches.
All ports that are need are allowed (as far as i know).

Any ideas?

A:Linksys WRT54G and Netgear FVS124G Router connection problem

From what I am seeing,you need to set the allowed ports and protocols
in the firewall setup in order to get traffic through the WAN.
The lynksys doesn't have this extensive protection.
Pobably just has virtual server and dmz.
You may want to check the manual on setting up WAN traffic
through the firewall.

3 more replies
Answer Match 65.94%

I'm wondering maybe someone could help me or make a good suggestion/advise!
I'm little bit worried. I bought wireless netgear dg834gsp ADSL modem router, but i don't have ADSL connection. I have cable connection. Does this mean that my router is unusuable for my PC and my internet connection? Maybe there is some hope to make connection? I don't have any possibilities to change it, because I bought it abroad.

A:netgear dg834gsp ADSL modem router connection problems

You can connect/configure it as an ethernet switch (if it has multiple LAN ports) and wireless access point, but you cannot use it as a router except with ADSL internet service.

2 more replies
Answer Match 65.94%

So I have AT&T DSL. I bought a Netgear N300 ADSL2+ Modem/WiFi Router that is compatible with my service.

Previously with this Modem/Router it would constantly drop the wireless connection for the Wii I have that was used to stream Netflix.

So recently I bought a Linksys E2500 Router so I could be able to use the Wii, along with 3 other desktops, 1 laptop, and 3 phones.

My ideal setup would be this:
Set the ADSL2+ Modem/Router to be just a modem (I know how to set the option for this)​Connect the Linksys Router to be what all the devices connect to wirelessly (this would serve as the DHCP server) ​
I have read that one of the Routers has to be set to "BRIDGED" mode, yet I don't know which device has to be Bridged


A:Solved: Netgear N300 ADSL2+ Router/Modem and Linksys E2500 Router Setup

Set the ADSL2+ Modem/Router to be just a modem (I know how to set the option for this)Click to expand...

this is being set into bridge mode - by changing to a modem

then connect the modem to the WAN on the router and you should be good to go

Do you have a wireless laptop that you can you can put next to the wii - would be useful to see the quality of the wireless signal and how many other wireless are there which may cause interference

put xirrus onto the laptop and put the laptop next to the wii and post a xirrus screen shot
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.
Direct link to the program is here

{If the above link does not work heres another link,77196-order,4/download.html}

Then run and install t... Read more

3 more replies
Answer Match 65.52%

Good Afternoon,

The small office where I work has 1 wired desktop, 1 desktop connected over wireless, 2 laptops connected over wireless and two iphones that are always connected to the internet. Until about 12:45 pm EST the wireless internet was working fine, at that time the wireless went down. However, the wired desktop has had no trouble connecting to the internet. Please help, we need to be up and running and our IT guy has disappeared off the face of the earth! Thank you!

The router is a Cisco WRVS4400N. It is one MacBook Pro, a Toshiba Laptop and a Dell desktop that is connected by D-Link DWA-131. Its a Comcast X-Finity 56 MBPS connection. (we're really close to an airbase).

A:Connection Problem - Multiple Devices over Wireless

Reset or power cycle the router. Can you still detect the wireless network? If so, can you connect to it? If so, can you communicate with the router via wireless?

1 more replies
Answer Match 65.52%

Hey all,..It's been a while, but I have a problem I can't seem to figure out. It's driving me and my family up the wall,...

Have a Linksys BRFSR41 router that has worked for years, but has recently dropped a port,and disconnects all the time,...I purchased a Netgear FVS318 router to replace it,..It seemed to be fine for a few minutes, but now it disconnects all the time, I mean all the time every few minutes,....It was a referb, so I figured it was just a bad unit, and decoded to return it, and found some good info on the new D-Link Gamers Lounge routers, that are suppose to be gamer friendly,...I use it as a wired unit, but got the DGL-4300,..Trying to set it up, and can't get it to let me on the net,..The old Linksys is now the same way,..After I had the Netgear FVS318 in the system, I can't get anything elss to run,...I keep having to put the silly Netgear back in, just to look for help, or anything else,...It's like the netgear made some settings in the system, that I have no idea how to find or change,in order to use a different router,...

Please give me a hand on this,..It's costing us a ton of time. Too many other things need attention besides messing with these routers,...

Thank you very much,...GRCRY,...>>>--->

A:Netgear router works, but looses connection, Linksys, and D-link won't work. I really

Bump for my father because this is effecting me horribly, too!


2 more replies
Answer Match 64.68%

Hello, two days ago suddenly my Internet wireless connection stopped working. No Internet at all. After some research, it turned out that it was (and still is) working on one device (the iMac I am typing this message on), but has completely shut down for the other devices, for example iPads, a laptop, etc.

So far, I have unplugged the power of the wireless router, turned it back on after giving it a rest, pressed the WBS button, but there has been no progress. The connectivity is obviously up and running based on the one device. What actions should I take? Thank you in advance.

A:Wireless Connection Stopped Working for Multiple Devices

Make model of the router. If you plug laptop in via a cable can you connect, can devices see the router and what happens when you try and connect ie error message note if you have done a factory reset the password for wireless will go back to default or wireless could be disabled. Can you login to the router and confirm the wireless is active

2 more replies
Answer Match 64.68%

I can connect to the Internet with my wireless router just fine, but only certain websites will load normally.  So far, these include Google, Gmail, Youtube, Facebook, and Wikipedia.  Most other websites just show that they are loading forever and nothing ever comes up.  I've already tried power cycling/resetting everything.  
As an example of what it says when I ping a website that doesn't work:
Pinging [] with 32 bytes of data:
Reply from Destination net unreachable.
Reply from Destination net unreachable.
Reply from Destination net unreachable.
Reply from Destination net unreachable.
Ping statistics for
           Packets : Sent = 4, Received = 4, Lost = 0 (0% loss),"
I also can't connect to Skype.  Itunes doesn't respond upon launch, but only while I'm connected.  It works normally while offline.
My phone has the same Internet problems while using wi-fi, but not while using data.
My Xbox One can connect to the Internet, but not to Xbox Live.  When I test its network connection, it says "DNS isn't resolving Xbox server names"
What's also strange is that my roommate isn't having these problems on his computer and phone even though we use the same wireless router.

More replies
Answer Match 64.68%

As it says on the tin really! I am an absolute non technically minded person so have no idea how to even start trying to fix this problem. A few weeks ago our router quite happily let multiple devices attach wirelessly to the internet at once but in the last couple of weeks it has started only allowing one device at a time to connect to the internet. If say my partners work laptop is connected then our home laptop/iPad can see the wireless router but it will not allow them to connect to the internet anymore. Can anyone help me to try and sort this please...I can use my computer for basic things but am in no way technically minded so please be very clear and simple with any help you are able to give.


A:Unable to connect multiple devices to internet using Huawei EchoLife HG521 router?

10 more replies
Answer Match 63.84%

I'm thinking of buying a wireless router for my son who has a laptop but he ALWAYS downloads huge files (games or whatever he does) when he uses my computer so is there a way to limit the bandwidth he gets when he connects to the router through his laptop?

A:Is it possible to limit the connection speed of devices connected to a router?

Look for a wireless router with traffic shaping and QoS. From my search, a Billion 7400 has traffic shaping. Also, the Actiontec MI424WR has it as well. Here's the shot from the Actiontec configuration pages.

1 more replies
Answer Match 62.58%

Heres my dilemna, I have installed a netgear wireless router for me (Win2000) and a usb wireless nic card for another pc in the house, to share my internet connection. The router seems to be configured correctly, i have a cable internet connection so my router is configured for dhcp to get ip's from the cable connection my pc runs flawlessly, i also have inplace the necessary wireless security. But my issue is the other (Win98) wireless workstation, it can see my SSID on the network and my connection is reading at 65% but it doesnt seem to see the router i have the worstation configured for dhcp from the router but for some reason they dont see eachother I dont understand why? if i run ipcofig on the win98 pc i get a apipa address instead of a dhcp ip address that my router should be pushing out just like it does for my pc??? I think im missing a major step here but i cant see it...

A:Solved: Regarding Netgear Wireless Router and Netgear USB Wireless nic card...

12 more replies
Answer Match 62.58%

Good Evening
hope someone can help

i have a netgear router dg834gt and netgear switch gs608

2 computers connected direct to router work fine (using vista!)

yet 4 computers through switch have no internet access!! (using xp)

switch is connected via Cat5E cable to router
have tried everything i can think, with exceptions of upgrading firmware!

any help would be greatly recieved! (am having to make do with dongle!)


A:Solved: no internet through switch (Netgear router Netgear switch)

13 more replies
Answer Match 62.16%

I just (3 days ago) hooked up my desktop (Windows XP) to Comcast Cable Modem through a Netgear WNDR Router. I get "No Connection to the Internet" once or twice a day, even though I had been using the internet earlier in the day. It also seems that if a site on the internet is left running for several hours (inadvertently) while we are away from the house, when I go to get on to a different site, I get "No Internet Connection" and have to unplug then replug the router.

A:Solved: Lose internet connection

6 more replies
Answer Match 61.74%

Hi All,

I recently put in a Netgear firewall, configured it, its running no problem. Then I setup a new Netgear N600 wireless router, configured it, gave it a static IP, connected to it, works like a charm. Thing is, when I try to access the web gui I receive nothing.. Is the Netgear firewall taking priority or something? I went directly connected to the netgear wifi router and double checked to make sure that there was no settings restricting administration from wifi users, etc.. Anyone have a similar setup ?

Thanks All

A:Netgear FVS318G FW & Netgear N600 wifi router Can't access webgui

You sure been busy! Have "seen" you all over this place.

Is the FVS318G router connected to the N600 router's WAN port or a LAN port?

If WAN have you changed one of the routers so that they don't both use the same LAN subnet (I didn't check each one, but they probably both default to the same).

If LAN have you disabled the N600's Dhcp server?

3 more replies
Answer Match 61.74%

for some reason a couple of computers ive help debug have problems. it may be because i updated("windows"), put virus scanners, adaware, spybot, and removed virus's and bugs. or because these folks are stuck using outlook only.
no surfing, no porn, no games, just old folks that check there mail. anyway , back to my question. they just hit outlook express and check their mail. which connects them, when i switch to internet explorer the connection dies and i have too reconnect to use IE, i have remover BLaSTER from both of them and klez. as these folks cant seem to use any program other than outlook to send and recieve there mail. how do i sync ie and outlook to use the same connection without disconecting every time.thanks for the help ahead of time

A:Solved: switching between IE and outlook lose connection

6 more replies
Answer Match 61.74%

The title pretty much says it all. If I eject a CD while online I temporarily lose my internet connection. Also when I turn off (dismount) my external Hard Drive I lose my internet connection as well.(I lose the connection & then it resets itself!) Any Ideas as to why this may be happening?

A:Solved: Eject CD & Lose Internet Connection!

For everyone's info I present the following from Linksys/Cisco Community Forums:

From yleclerc:

Yes, it seems to be a known problem. Whenever the Wireless Network software is installed, the wireless adapter may disconnect when:

-- Connecting another USB device
-- Disconnecting any USB device
-- Inserting CD / DVD
-- Ejecting CD / DVD
-- Ejecting Digital camera medias

No real solution since Linksys has not revised the drviers / software.

The "other" solution of using RALink drivers does not seem to be a true solution. Most of the time, the RALink driver will not detect the Linksys adapter.

from Star:

I solved this by uninstalling the Linksys Wireless Network Monitor. I no longer disconnect from the internet when I turn off a USB or Firewire device (ipod, canon mx850 printer, external hard drive). However, using Windows Zero Configuration isn't a perfect solution. The drawback is that I have frequent 2-5 second freeze ups in World of Warcraft with WZC, especially in combat. So my workaround is to stop the WZC service once I have booted up and have an internet connection. It is quite annoying!

Thank You Linksys....

3 more replies
Answer Match 61.74%

Well, again I have no internet connection, right when I need to file my taxes. My roommates are no longer using my computer for now on.'s what's happening.

PC, Win 98SE (I know, i need to upgrade).
I have run Spy-Bot, Ad-Aware, and AVG Free virus scan, all clean. Also run again in safe mode, all clean.
I run winipcfg and have an ip address, can release and renew no problem. My roommate has pinged my computer with his on the network no problems. Just no connection to any internet linked software. No pages found in MS IE, Firefox; no connection on any chat service, email or piece of software that using the internet to update.

Any help would be greatly appreciated. Thanks in advance!

A:Solved: No internet connection yet a lose of ideas. Thank you

16 more replies
Answer Match 61.32%

Should be easy!....
But I cannot get my NEW Netgear N600 router to communicate with a NEW Netgear WN 3000 RP extender.

The instructions say to press the WPS button on the extender then the WPS button on the router. No WPS button exists on the router!

The instructions also I can use any wireless network manager utility to set this up. Can't find where this is in Windows 7.

The I pad has found the NETGEAR_EXT address but won't connect. And the light on the extender does no indicate teh router is communicating with it.

Thought this process would be a simple plug and play, but...frustration!

A:Netgear N600 router & Netgear WN3000 range extender

You can see the button here pal ... Netgear call it "Push 'N' Connect"

3 more replies
Answer Match 61.32%

My "asus" tablet. It has numbers and was tied in ok to my pc.Until my my daughter-in-law reset it, trying to help with a different problem..? Is this fairly simple to do, again? there are security numbers and a serial number on the back, of the router. Are these t to be used? please accept my thanks on this. bob s ~waiting to hear

A:[SOLVED] netgear router/how do i tie it-----

If the router is using WEP or WPA encryption you will have to enter the paraphrase into each device. The numbers on the back are either WPS password and the MAC address.

Go to the manufacture of your router website and look for "Support" or documents to show you how to do this.

Other than that we can not help you with passwords, keys, and codes it is against the rules here. Forum Rules

3 more replies
Answer Match 61.32%

Hey, I have a netgear router and every time I restart my computer the router seems to not work anymore. After restart I click IE and it loads up to that Not respondiong screen. Once I reset the modem and router its fine again. Anyone have any ideas on what it could be?

A:Solved: NetGear Router

14 more replies
Answer Match 61.32%

This is a problem that I have been having and been trying to get resolved for a month or so.

The system that I have is a home computer, windows xp sp#3 home version IP static, with a subnet automatically set to The second computer that I use is a laptop, windows 2000 pro, sp#4, static ip is also with a subnet set as well as the first computer. I do not have a problem using the crossover cable and transfereing files that way, but now I have a router in the line and wanted to send the information wireless to the computer A through the router. The router has been changed from itís original ip of to with the same subnet as the 2 computers.

I can use the command from the computer A and ping the computer A and the router to rule out telecommunication error from one side. When I ping the laptop, nothing. I get timed out. When I do the same on the laptop, I can ping just only the laptop. Then I tried to ping the router, I get timed out as well. Is there anything that I am missing?

I have also shared both drives on both computers as well and the permissions have been set.

The router is a netgear wrg614 that is using dhcp server address within the ip range. Also there is no DSL internet on this rounter, I am trying to use it as a file sharing device between 2 computers.

On the two computers, I have installed the file sharing within the properties of the network connections and they are both on the same networ... Read more

A:Solved: pc to pc with a netgear router

10 more replies
Answer Match 60.9%

Just recently started that when I click on Outlook Express to check my E-mail, I get instantly dis-connected!A couple of times I stayed connected for several second and than - I think - when Norton antiVirus kicked in to
check for viruses than disconnected...
Norton is updated. I am puzzled??? I don't know much about PCs to start with...
Any suggestion would be appreciated.

A:Solved: Click on Outlook Express & Lose Connection?

6 more replies
Answer Match 60.9%

i just got a laptop 2 days ago with Vista (dont know if this is a Vista question or not). When i start my laptop, i have a fine wireless connection. then when i close the lid it all goes into hibernation, ofcourse, but then when i open the lid later, not only is the connection gone, but the laptop will not even recognize my Linksys router & wireless - which is only 3 feet away! i have to restart the computer to get a connection again.
ive called Gateway 4 times and i get a different response everytime i call - one just told me a MUST reinstall windows in order to fix it. Even Lisksys gives me different answers everytim i call too.
Vista has alot more settings and little petty nuances than XP. is there a setting i have to make for the wireless to be recognized after hibernation?

A:Solved: i lose connection for good when laptop lid closes

10 more replies
Answer Match 60.48%

I purchased a Netgear WNR2000v2 Router last week and have not been able to enable the traffic meter, it is grayed out. I would like to keep track of my bandwidth flow on 3 home computers and a laptop. Does it not support cable modem? Please advise.

A:Solved: Netgear WNR2000v2 Router

Maybe not. I don't know how you or anyone else would have a firmware release before the initial release but this confusing FAQ seems to say something about your issue:

10. Why is the Enable Traffic Meter checkbox grayed-out and unable to setup the traffic meter?

Please note that the firmware version before v1.0.0.34 (initial release) only supports Traffic Meter for WAN types on PPPoE or PPTP mode. Traffic Meter for WAN type with DHCP or Static IP mode will be supported on future FW release. Click to expand...

My advice is to update to the latest firmware, if there is a newer version than what you have, and then reset to factory default settings and reconfigure. If still no good all I can suggest is to call or email Netgear.

2 more replies
Answer Match 60.48%

I am not exactly computer savvy and when I was setting up my wireless router I used the CD that came with it. I have Windows Vista and a Netgear WGR614 v8 wireless router. When I installed it it wasnt working properly so I used the Vista tutorial and was able to finally access it on line. I thought I had set it up correctly and installed it as a secure network but even though I wrote my passcode down, it keeps telling me access denied. How do I uninstall it so I can start over again? Any help would be appreciated!

A:Solved: Netgear Router Troubles

7 more replies
Answer Match 60.48%

I have a netgear wirelress rotuer. it was working fine till this moning, I can see the lights are perfectly fine according to the netgear manual. I can ping the router but it will not connect to the internet. As far as I know, nothing has been change. The wireless router connects to a Netgear router and we ( who has wireless laptops access the wireless router.) I dont understand what happened. I tried 2 different pc and they both has the same problem. Any suggestions?? and its set to obtain automatically ips address. please help me thank you

thank you

A:Solved: netgear wrilress router

7 more replies
Answer Match 60.48%

As a small background - i moved into my first apartment with 4 other guys and since I brought the routers I'm the one trying to fix them. The router we initially set our place up with was the same one i used in my dorm last year. All year long it was iffy with Windows computers, kicking people off randomly, not letting them connect (myself included) yet my friends mac computers literally never had an issue once. After moving into this apartment I have not been able to connect to this router at all and have been using my upstairs neighbors' the entire semester. We thought it could possibly be because we have 5 laptops, 3 Xbox's and 5 smart phones attempting to access it (rarely all at once its usually probably 5 items total when were all home). So i made a trip home and grabbed a spare router my dad had laying around so we could run two routers. That's where i ran into some problems, well more problems i guess.

The original router : Netgear WNR1000
Second Router: Netgear WNDR3300
Modem: Arris TM822
ISP: Optimum
Laptop: HP dv6t Windows 7

So i tried plugging the second router in through one of the LAN ports on the original router to set up another network but it did not work. I searched all over the internet followed various instructions but none of them resulted in the second router giving me a connection to the internet. I tried to setup an internet connection with the second router alone but it would never connect to the internet even after i reset it t... Read more

A:Solved: Netgear Router Mess

8 more replies
Answer Match 60.48%

The problem is that everytime I want to play on Xbox Live than I get a NAT warning and I cannot join some of my friends games. The wireless router is a Netgear WGR614 v7 and I would like to know how to open the NAT. I am a tech noob and therefore would prefer easy instructions, any advice would be greatly recieved.

A:Solved: Strict NAT on Netgear Router

16 more replies
Answer Match 60.48%

I just got a NetGear Range Max Wireless G Router off ebay and am trying to install. Aside from the router all I have is the adapter and some instructions to reset the username and password. How do I set it up? I already looked up the default username and password. Now I need to know what to do next. I am using my other Router from Cox at the moment so I can look this up. I tried plugging in the phone ethernet cable and the adapter cable to computer and router. Then I went to use internet and there was an error message saying something like cannot display page. I typed in website and I kept getting error message. How can I reset the previous user name and password if I can't get internet connection? Everything turns on correctly including the router. Maybe there is a simple step that I have forgotten. Anyone got any ideas?

A:Solved: Netgear Wireless Router

9 more replies
Answer Match 60.48%

hi ,
netgear 54 mbps ADSL2 + modem router DG834g v4, it was working well for nearly a year and now i have problem connecting to internet and the internet lamp does not glow and am unable to connect to net, i lost the installation cd or manual , can some one help me fix this prob.
Thank you

A:Solved: netgear router not working, please help!!!

9 more replies
Answer Match 60.48%

I have a netgear router and recently i just purchased a iphone. for some reason my wifi connection does not work on my iphone. i have connected 2 desktop and 1 laptop through wifi with my netgear and it works fine. However, my wifi connects with my iphone but the webpage just doesnt load. Can it be my router blocking the connection through my phone? I know it is not my iphone so it have to be my netgear wifi. Is there is specific setting needed for my router in order for my iphone wifi to work?

More replies
Answer Match 60.48%

I search the knowledge base at and was unable to find the answer so here I am. I had my netgear WGR614v4 running for like a year, I upgraded the firmware to the latest release .v5_0_07 and my internet connection went to the dawgs, was lagging like crazy. So I attempt to revert back, but now the stupid connection wizard wouldn't allow me to access the router contril panel, and it doesn't see my broadband connection. I tried the reset button on the rear panel with no change. PLEASE I at my wits end here any help would be appreicated. Thanxs

A:Solved: netgear wgr614v4 router

Did you do the full factory reset, holding the button in for the required time? If that fails, I'd contact Netgear's tech support.

3 more replies
Answer Match 60.48%

I'm new here and need help. I've spent probably six hours with various tech support people over the last 24 hours and am frustrated.

Bought and installed a new Netgear N600 Wireless Dual Band Router WNDR 3400. Modem is actually an ActionTec Gateway GT701 which I have made a bridge to the router (also recently updated firmware too). I can get online wirelessly with several computers and the ethernet connection on the XP works fine too. The MAIN problem is that my wireless signal isn't any stronger than before on the old ActionTec.

One of the reasons we got this is because the wireless signal didn't reach to the master bedroom (using iPad or iTouch). Now it will sometimes show one bar, but is quick to drop it.

I'm so frustrated and don't know what else to try. The router is placed up high in the office and does have to go through a block wall. But I read lots of reviews where the Netgear boasts strong and far reaching signals.

Anything else I can do? Thanks for your help.

A:Solved: New NetGear router problem

8 more replies
Answer Match 60.48%

I've been trying for days to log into my router to try to enable encryption,

Each time I get ''log in failed'' System Authentication Failed. Please contact your system administrator for the correct information

I've tried everything suggested on the page below, nothing works.

My Internet connection through the Router is fine, no problems, 48.0Mpbs at the moment.

I had previously phoned the support line twice because the encryption code they gave me didn't work, all it did was stop me from connecting to the internet, no joy there , they just talked me through exactly what's on the troubleshooting page above, suggested it was a problem with the wireless card.

I'ts since then I can't connect to the Router.

I've spoken to IBM support, ( lovely people logged the call and phoned me back, cheapest support call ever )
we've tested everything and they assure me it's a problem with the Router, only now I can't get in to change anything.

I've mailed Netgear Support twice, once Saturday then again Tuesday, no reply yet so I was hopeing someone here may have a few ideas.

It's a new IBM Thinkpad R51, running WXP Pro.

A:Solved: Netgear Router DG834G

8 more replies
Answer Match 60.48%

Ok, so far Tech Support Guy users have been soooo helpful with all my problems and patient with my amateur-ness
Let's hope you can understand me with this inquiry, and I can understand what I need to do...
I have a Netgear Wireless-N 150 Router WNR1000v2 that my daughter hooked up for me a few months back. Then the ISP provider was "switched" and I'm told that my brother was at my home re-installing the same router. I was out of the country and now that I'm home, we've "switched" ISP's again, and apparently the router needs to be re-installed again...?
I'm not understanding "why" it needs to be re-installed each time... I would've guessed that "once" would be enough (thus being the initial installation) followed by maybe "reconfigured" or something [at most] whenever we switch services... Wouldn't that make sense?
However, if re-installation is necessary, so be it, but that isn't my problem... the original CD seems to be missing (along with a bunch of other CD's) which I'm almost sure my brother "took" because he took alot of things that he won't return... [long story short, my brother has addiction problems and is causing problems in the family].
Anyway, is there a way I can "accomplish" setting up this router "without" the original CD?
There are some icons my desktop that apparently were downloaded during this whole installation, such ... Read more

A:Solved: Help setting up a Netgear router pls

The only value of the CD is the user manual, which you already have online, so no loss there.

Chapter 1 of the manual is probably sufficient for your task. If you can connect your computers to the router by ethernet and by wireless then the only thing you probably have to do is (re)configure the WAN settings--how it connects to your modem.

If you post your modem brand and model we can probably help with the WAN configuration if you don't have the information from your ISP. If you are posting via a connection to your modem you could post the following to give us some more hints ...

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:


[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.

3 more replies
Answer Match 60.48%

Would it be worthwhile to upgrade a Netgear MR814 router to a newer Super G or better. When currently using this router it says it will take me 13 hours to download a 46MB file, watching it transfer at a rate of approx. 1.54 KB/sec. Worked with RR tech support and they say the modem is transferring at correct speed so problem must be with wireless router which I have had for approx. 5-6 years. Problem began when I switched to digital phone and they brought me a new modem.

A:Solved: Need to upgrade Netgear Router?

12 more replies
Answer Match 60.48%

I recently replaced my old router with the Netgear WPN824 RangeMax router. I have 4 systems on it (3 PC, 1 Mac). All have an internet connection. When all 4 systems are running Windows operating systems (3x Vista, 1x XP; my wife has Vista on her Mac for some PC MMO gaming), there's no issue. However, when she boots back to her Mac OS, download rates drop to 14-30Kbps.

I've spoken to the people at Netgear, who said they had absolutely no idea what was going on.

edit: I forgot to add I have 2 desktops (1 mac, 1 pc running vista) direct wired to the router and 2 laptops (both pc's, 1 xp, 1 vista) connected via wireless.

A:Solved: Netgear WPN824 Router

8 more replies
Answer Match 60.06%

I have an HP laptop with an XP home with all updates, semantic antivirus, and zone alarm free firewall. A few days ago, I started losing my Internet connection, having to reboot to get going. Virus scan is clean. Same story for wifi or plug-in connection, both fail. HP network repair isn't fixing the problem. A new machine is working fine, but now I can only get 3 minutes of Internet on my older PC. Very annoying. I did do some windows patches over the past month. Zone alarm version 9-- issue with them? I set my networks to be trusted. I tried installing different browsers. Can't think of what to do next? Thanks for any help.
--finance guy (not tech support)

A:Solved: Lose Internet connection after 3 mintues on XP. Only restarted fixes.

16 more replies
Answer Match 60.06%

(Sorry, I just edited this because I realized the title said Wireless Router, it's actually a gateway. Can't fix it.)

I have a Netgear CGD24G Wireless Gateway and a Gateway MA8 laptop with after-market Windows 7 (Vista got a virus, went ahead and upgraded.)

Now, when I download 100 MB files on my Xbox 360 (Which is wired to the modem) it will be downloaded in a couple minutes, or less. The other computers in my house (There are plenty, and even more that come and go.) get a blazing internet connection, and most of them are wireless. Now this computer, which had an extremely quick connection as well all of a sudden dropped off, while the rest of the computers remain fast.

I've gone to before and after this occurred and my speed before was around 12 mb/s, and one time around 4 AM was even upward of 25 mb/s, all of these tests were performed multiple times on different server locations.

I JUST did the speedtest, and it came back with .4 mb/s, and the UL speed was 2.0. I honestly can't remember what I averaged with it prior to the problem, but it was definitely higher as well.

This started happening a little less than a week ago, and I've downloaded/changed nothing major with the computer, and have mainly used it for light browsing, and an occasional download.

Also, this is mainly just a hobby fix. I have a long enough cable to wire the computer straight to the gateway, so I really don't want to buy new hardware or anything of t... Read more

A:Only one computer with slow wireless connection, Netgear CGD24G Wireless Router

7 more replies
Answer Match 60.06%

Hello everyone,

I just bought my parents a Netgear WGR614v10 wireless router for Christmas. I'm trying to set up a wireless network and make a wired connection from the router to their Dell Dimension 2400 desktop running Windows XP SP3. Internet access is provided by NetZero using a 2Wire DSL modem. Without the router connected, the wired Internet connection with the Dell desktop works fine.

I went through the procedure correctly to set up the wireless router but there is no Internet access. So I plugged the router directly to the desktop NIC and tried a "ping" command to I received four "Destination host unreachable" responses.

An "ipconfig /all" shows (with direct Ethernet connection between NIC and router port 1):

Windows IP Configuration

Host Name . . . . . . . . . . . : Ruzan01
Primary Dns Suffix. . . . . . . :
Node Type . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . : No
WINS Proxy Enabled. . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix. :
Description . . . . . . . . . . : Broadcom 440x 10/100 Integrated Controller
Physical Address. . . . . . . . : 00-0F-1F-98-62-05
Dhcp Enabled. . . . . . . . . . : Yes
Autoconfiguration Enabled . . . : Yes
Autoconfiguration IP Address. . :
Subnet Mask . . . . . . . . . . :
Default Gateway . . . . . . . . :

Some other info:
1. I tested the router by connecting it via Ethernet cable to my laptop ... Read more

A:Solved: NETGEAR wireless router not working to expand...

That IP means windows has assihgned the IP as it could not find the DHCP service from the router - lets see the services - see below - see if dhcp and other service are running
maybe a firewall blocking - has the machine ever had norton installed - if so use norton removal tool to remove - this often blocks access , and gives various strange results ie email and updates work but browsing wont - so would not surprise me that a modem works but router wont , as you get different IP range from modem

Norton Removal Tool

with the PC connected by cable - try safemode with networking
as the pc starts keep tapping F8 a menu appears - choose
safemode with networking see if that works ok

1. I tested the router by connecting it via Ethernet cable to my laptop (a different computer running Windows XP). I could ping the and access the configuration page no problem (so router is OK).Click to expand...

Do you get internet access all OK
post back an ipconfig /all from your working PC - make sure we know its yours

also post back a device manager screen shot from the faulty PC
{Device Manager}
Post back the results in device manager
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Start > control Panel {Vista set to clas... Read more

3 more replies
Answer Match 60.06%

I am currently visiting a family in France who have a Netgear router (DG834G), but my Dell laptop can 't see it. All my drivers are up to date.

A:Solved: can't find netgear wireless router

12 more replies
Answer Match 60.06%

Well i finally bought the hardware to make a small network at home, my sons pc to be exact.

So i goes and buys a netgear rp114 router which was recommended to my by a mate.

I have a 1mb cable modem connection and both pc's are running windows xp pro, and have more or less the same hardware specs. ( xp2100)

Well i sent the son up into the loft to wire up the cat 5 cable, connected the router to the cable modem (wan) then connected the 2 pc's to slots 1 and 2 at the back of the modem.

Switched everything on all lights are on everything seems ok.
So i tried to connect to the internet with my pc, but no connection

So my question can anyone give me a link to a site with a step by step guide to setting up both pc,s so as to share internet connection.


A:(solved) noob needs help netgear router setup

16 more replies
Answer Match 60.06%

I have a Netgear DGB834Gv3 router and a Netgear WG111v2 adapter. When first setup I was wireless for about a week. Then I tried to update my security settings and went for a WPS2 PSK setting with password. Since then I have not been able to get the two to communicate. The router seems to be sending signals as it appears in the Available Networks window, and the adapter seems to be flashing blue lights occasionally, but the adapter won't pick up the signals.
Any ideas, please?

A:Solved: netgear router and adapter don't talk

16 more replies
Answer Match 60.06%

Here is the enviroment that I have: One desktop with wol capabilities attached via cable to netgear router. 2 laptops with wifi capabilities. At first I was using the netgear router as a point to point file sharing device that I can use as a INTRANET. Since the desktop has wol via cable, I can access the desktop anytime with my laptop using static IP. Now the wife went and got 2wire modem with wifi capability and is using it on her laptop. I am wondering if I can change the settings within the 2 wire to setup static ip for INTRANET use and be able to get INTERNET access as well. The other problem is that I am still wanting to use the netgear router for the desktop as a wol so that I can access that computer as well for files. Is this non-impossible? I have all of the keys and total information for both routers.

Any help is greatly appreciated.

A:Solved: Netgear router and 2 wire system

9 more replies
Answer Match 60.06%


I have a Netgear Wireless N-300 Router and I'm able to get on the internet on my computer that is hardwired into the router, but the wireless feature does not seem to work. I cannot get wifi on my iPhone, my netbook my iPad, or my laptop. All devices tell me i'm connected to the router, but I am not able to update any pages or connect to the internet. it's very frustrating, as Netgear will only help you if you spend $40/month on tech support and I've done all the firmware updates and have tried everything I can think of. Has anyone else had this problem? All of the lights on the router tell me everything seems to be working fine. And my phone tells me that I have a strong wireless connection, but nothing works. Very frustrated!!!

Thanks in advance for any help offered. PLEASE HELP!!


A:Solved: Netgear Wireless Router problems

9 more replies
Answer Match 60.06%

I am trying to decide between the Dlink DGL-4500 and the Netgear WNDR3700

Both support dual band/gigabit.

Anyone using either of these? Your thoughts?

A:Solved: Netgear vs Dlink router - your choice?

My personal choice would be the D-Link, but I suspect both will be similar. I haven't used either of them, so I base my opinion on my experience with other products from the two companies.

2 more replies
Answer Match 60.06%

Hi, I am an absolute computer beginner (I use my computer for word processing, email, and internet), so please bear with me; I read a lot of other posts to determine what I would need to say here, sorry if i leave anything out.

We have a gateway desktop with windows xp, which is connected to a cable modem, and the modem to a wireless router, netgear wgr614v6. an ibm laptop running xp connects to the wireless network and has never had any problems. we got a new laptop, gateway, with vista on it and it will not connect to any wireless network. i ahve already called gateway tech support, reinstalled the drivers, gone through all their suggestions, and they say the problem is with my router. the laptop finds my wireless network but says it cannot connect, no matter how close it is to the router. the network is not password protected, encrypted, and i even tried turning off all firewalls. i have logged in to the router and tried changing the channels and other settings to see if that would work and nothing does. i have power cycled the router and modem every time i made a change to see if that would help and it does not. the laptop consistenly sees the network but says it can't connect.

netgear has a site with info on upgrading your router for vista but next to my model router is a link for a complete reinstall of the router; we dont have vista on this desktop and there is no one file specified to upgrade the router for vista in the download.

do i just need to get another... Read more

A:Solved: Netgear WGR614v6 Router and Vista

16 more replies
Answer Match 60.06%

I have just set up a NETGEAR WPN824 wireless router and I am now having trouble connecting to it wirelessly. I am able to connect to it fine wired to my desktop, running xp, but when I try to connect on either my laptop, running OSX, my ipod touch, or even my desktop using a wireless adapter I am unable to connect. I have tried removing all security, and they still are unable to connect. I can see the network just fine on any of the devices, but when I try connecting it tries for a few seconds then just gives up. Any help would be most appreciated.

A:Solved: Not able to connect to NETGEAR router on any device

11 more replies
Answer Match 60.06%

So I went to my routers setup page and downloaded a new version. After I download it and it shows up in 'Downloads' how do I use it to update the router? When I click open it asked me what program I want to use to open it. Any advice?

A:Solved: help updating netgear router after download?

You need to log on to the router, and load it through the web interface.

I've got a netgear router, the IP address for the router should be

Type that into a web browser's address bar.

1 more replies
Answer Match 59.64%

I'm currently trying to have internet in a different place than my main one, i have the current modem plugged.

It seems both are plugged.

On the arris one i see those lights on.

[x] Power
[x] DS
[x] US
[x] Online
[ ] Link
[x] Telephone 1
[ ] Telephone 2
[x] Battery

On the Motorola one i got all the lights on.

I'm trying to put internet into a second room by wire.

I connected the wire from my second computer to the Arris modem in the yellow plug, and it still doesn't work.

Could i please get some help on how i could get multiple internet, i'm really having some trouble right now.

Thank you very much!
/Edit If it helps, i use Windows Vista.

If it's not possible to receive multiple internet with those, please tell me what i need!

PS: Sorry for my grammar, my natal language is french.

A:Modem / Router Internet multiple connection. Help!

9 more replies
Answer Match 59.64%

I run Vista Home Premium on my Dell Inspiron Notebook. Something that is a recent problem in the last few weeks; often when I have to hit the power button to wake up the notebook from sleep mode (hibernation), I lose the internet connection, but still have local connection. I disconnect and try to connect but can't, but when I reboot it automatically reconnects fine to local and internet. I say often, as sometime after a short sleep it is still connected......

Have checked all settings and everything seems fine,but maybe I missed something. This never use to happen. Only change I have made I can think of is I installed COMODO firewall a few weeks back......about the same time I recall this starting.

My wife's PC with Norton Internet Security always gets the internet connection after wakeup without problem. The two computers are not networked but use the same wireless router.
The only other thing I did was stop Superspywareblaster from opening at startup so I could just use it to scan occassionally. I also run Nod32.

Any ideas as I am a bt baffled by this glitch?

A:Solved: Lose internet but not local wireless connection when laptop wakes up.

16 more replies
Answer Match 59.22%

As of last friday, I had a xbox 360 that worked fine with this router. But, my Xbox crashed, so I bought a used one. When I plug it in to my router with an ethernet cable, the light shows on the port for a little while then resets. This creates a disruption, and the xbox wont connect. It fails the very first network test. I tried different cables, that didnt work. However, if i plug the same ethernet cord into my laptop from the same port on the router, the laptop still gets internet and the connection does not drop.
Also, I plugged the xbox directly into the modem and THIS worked. So, its not a faulty ethernet port on the xbox. I tried port forwarding the ports that are recommended to open on the router and i tried resetting the router and modem multiple times.
Nothing changed on the router between xboxes, and I know I have at least covered all the basics. A friend told me I may be able to try turning off Mac Address Filtering, but I dont know how to do this on my NetGear wgr614 v5 router.
Anybody have any ideas whats going on? The weirdest part is how it will connect, and the light is lit up on the port the xbox is plugged into, but then when i run a test the lighht goes out and the test fails. Its like the router is kicking the xbox off or keeps resetting that connection.

Thanks in advance for any help!

A:Solved: Xbox 360 not connecting to NetGear WGR614 v5 router

16 more replies
Answer Match 59.22%

NetGear router works properly. There was no problem to install wireless USB adapter on other computer. However when NetGear WG111V2 smart wizard scans for SSID in Networks tab it doesn't recognize a router ( nothing is found ). Tried with WEP first , then disabled any security but didn't make any difference.

A:Solved: NetGear WG111V2 doesn't see router after scanning

6 more replies
Answer Match 59.22%

Hi All

I have a Netgear Router at home, and both my Laptop and Tablet connect to it via WiFi. Now on both the Laptop and Tablet, Internet has recently become VERY slow. I contacted my ISP and they said everything on their side is fine, so it has to be on my side...

What can cause this? I've checked for Malware but the fact that both the tablet and Laptop has slow internet points to the router. I also flushed my DNS on my laptop and booted into safemode with networking, internet still ridiculously slow...

Note, both the laptop and tablet travel with me and did connect to other networks sometimes

Any Suggestions?

Thank You

A:Solved: Slow Internet on PC and Tablet via Netgear Router

On the laptop what download reading do you get with with an ethernet connection and with a wireless connection?

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If you need help with that see TSG Posting a Screenshot. FWIW to take screen shots with Windows 7 or Vista I prefer to use the built-in Snipping Tool.

3 more replies
Answer Match 59.22%

How I fixed my connection problem.

With Netgear DG834GT and TalkTalk, my connection stayed up for Half Hour to an hour before it fell over. Only a router restart would get the internet up again. Also, when the internet went down, the ' i ' light went out. Also had a similar problem with the TalkTalk supplied router.

Was previously with SKY and had the same problem with their supplied DG834GT router.

Complained to TalkTalk constantly, finally sent their engineer, who did not find the problem within the first half hour as the connection is always up, but engineer said he would say the connection dropped while he was there so that a BT Engineer could come out.

BT Engineer came out twice and could not find problem as well. On the second visit, engineer got exchange to test from exchange to the DG834GT and all was OK. Gave TalkTalk an update that the problem still exists. However after the BT engineer finished his testing, noticed the ' i ' light on the router stayed up even when the connection went down.

Tried the TalkTalk wired router again and noticed this time the connection stayed up, but same problem with the DG834GT.


I borrowed my brothers DG834GT which he is using on UKONLINE at his home and works without problem. Suprisingly, this identical router worked fine on my connection on TalkTalk and UKonline. However, my original router worked fine on his UKONLINE service, but did not work well on my TALKTALK connection. When I was with SKY, I d... Read more

A:Solved: Netgear Router TalkTalk UKOnline DG834

Has this issue just started? Or has it never worked? How many other devices do you have on the BT line. ie. No of phones? Fax's. Is this device connect to the master BT connection? Filters are installed on other connected equipment? If possible. Disconnect eveything possible to reduce possible causes. I have same Router and have no problem. So, at least we know that the router does work with talktalk. Are you able to login to the admin pannel on the router? If so can you provide the firmware version Under >Maintenance>Router Status.


2 more replies
Answer Match 59.22%

I have a netgear router and i cant get it to connect to the internet through my comcast rca modem. i have tried the power cycle thing many times and the ipconfig/release / renew but nothing. i haven't tried the mac address thing but i need step by step instructions to do it because i am not very tech smart. Also i might not be turning my modem off all the way. the light still blinks but i am not sure how to turn it all the way off. Can anyone help?

A:Solved: My Netgear router wont connect to the internet.

7 more replies
Answer Match 59.22%

After a few frustrating hours trying to figure out why my new HP couldn't see my Netgear WGT624v2, I conntect hardwire, downloaded the windows updates and ... still coundn't find my router. I tried the WGT624v3 and it did not work. Couldn't find a driver on the netgear site. Do I have to buy a new rounter?!? This makes no sense to me.


A:Solved: Netgear wireless router not supported by Vista

7 more replies
Answer Match 59.22%

I have just recently had installed a sky satellite along with the sky+hd service. The sky+hd box is connected to a phone extension line via a filter. All other extensions have filters installed. I have a digital phone connected to the same extension as sky via a second filter. Both filters go into a splitter. Since this has been done I can no longer connect to AOL. I can sometimes connect to the internet via IE but cannot load any web pages apart from those with very few graphics - and loading is excruciatingly slow. If I disconnect the sky+hd box everything is fine. If I leave the sky+hd box connected, switched on but don't switch the Panasonic TV on everything is still fine. The TV is connected to the sky+hd box via an HDMI cable. I am on a BT line, more than 5 miles from the exchange, and according to BT my max available speed is 256k!! I have run broadband speed checker and it gives me download speeds of 464k and upload of 213k. My router is a netgear dg834g and I am running windows vista (SP1 I think).
Any ideas out there? Could it be a bandwidth problem?

A:[SOLVED] aol broadband won't connect, netgear dg834 router, sky+ hd

I don't seem to have 'edit' option yet - maybe because I just joined forum yesterday - so will reply to my own post.
Solution - use TWO filters between extension socket and Sky+HD box. Found this solution on another forum and it works. Apparently using a better quality filter at the main BT socket also works ie. one of those which replaces the faceplate and filters all extensions.

1 more replies
Answer Match 59.22%

Hi I would like to password protect my Netgear WGT624v3 wireless router but I can not access the Netgear settings page. I have always had a problem with this. The Netgear WGT624v3 wireless router is connecting to a Linksys BEFSR41v3 router. This reason for this is because the modem and Linksys BEFSR41v3 router is in my basement and I am on the 3rd floor of the house. The wireless router will not work from my basement so I have it with me on the 3rd floor. When I try to access the settings page for the Netgear router using it is sending me to the Linksys router settings page. Can anyone help me with this issue please? I am pretty sure my neighbors are using my wireless router and it's been slow the past couple of days. Thanks!

A:Solved: Securing a Netgear WGT624v3 wireless router

7 more replies
Answer Match 59.22%

I have a netgear WGT624 v3 Wireless G router. I run linux, and recently I started noticing that anytime I tried to download a large file (like a deb file which is similar to a setup.exe in some ways) would be corrupted. Running md5sum would confirm that each download attempt would be corrupted differently every time.

I ruled out the laptop by bypassing the router and going strait to the cable modem and with that connection I had zero errors. Otherwise, connecting to the router wirelessly causes problems (and this has been confirmed via a laptop, a PC and an iPhone which has also experienced download problems with installing apps).

The router is currently running the latest available firmware and it's been running this version for at least a year with no issues up until a couple days ago.

I've attempted to reset the router to it's factory defaults and work my way back up to a wireless WPA2 connection from scratch, but it didn't solve anything. Even disabling encryption entirely still produces the same problem. Some downloads just locks up for minutes before resuming and ultimately to no good end as the download is still corrupt.

So, does this sound like a hardware problem? Think it might be possible to fix it somehow? Perhaps blowing dust out of it maybe? Probably worth a shot but I've never heard of anyone doing that before.

Any other suggestions? Would it be worthwhile to attempt to reinstall the firmware? Or even revert to an older version to s... Read more

A:Solved: My Netgear Wireless G Router is starting to flake out. What can I do?

7 more replies
Answer Match 59.22%


Why is it that My Linksys WUSB54GC Compact Wireless-G USB Adapter can't detect the Netgear router(MR814v2) in my home ? Any ideas?

A:Solved: linksys adapter works with netgear router?

6 more replies
Answer Match 59.22%

Have a Netgear N150 wireless router. it had previously worked fine but now doesn't connect to by modem can anyone help? my operating system is Windows 7

I have another pc and ps3 that are connecting so its not the modem.

A:Solved: Netgear wireless router stopped working

8 more replies