Tech Problem Aggregator

DHCP Server Service -Error 1075 - not starting

Q: DHCP Server Service -Error 1075 - not starting

Hey all!
I am really desperate. I've tried a few things that other people have posted here, especially Cookiegal and Lumpola but this issue persists.

I had a virus. I think I got rid of it. Avast scans and boot time scans and Super Anti Spyware and TDSS killer report all clear. However, the network shield of Avast and the Internet don't work.
Points to note:
1. In services, the DHCP and DNS cannot be started. I get the error 1075: service has been marked for deletion or one of it's dependancies are missing. (close to that)

I've checked the dependancies of both, and reinstated the ADF module in device manager after selecting the 'View Hidden' option.

A: DHCP Server Service -Error 1075 - not starting

2. I've tried deleting the winsock and winsock2 entries in the registry.
3. From the command prompt, SFC/scan now terminates at 82%. thrice.
4. I can see the network, both wired and wireless, I can connect, but it says I have limited connectivity.

3 more replies
Answer Match 107.52%

Avg found two trojans. It didn't seem like it removed them. Internet was working though. Ran malwarebytes it found nothing. Internet was still working. Started Having connectivity issues. My dhcp client service won't start. I got a 1075 error. my internet via wifi or wired. I ran the following command prompts:
net start AFD (response: the requested has already been started)
netsh int ip reset reset.log (response: resetting echo request, failed. Access is denied. Rebooting interface, ok! A reboot is required to complete this action.
netsh winsock reset catalog (response: successfully reset the winsock catalog. You must restart the computer in order to complete the reset.
SFC /SCANNOW (scan finishes and shows this response: windows resource protection found corrupt files but was unable to fix some of them. Details are included in the cbs.log windir\logs\cbs\cbs.log

What now? Please help.
 

A:Network issue dhcp client service error 1075

I'm thinking you're still infected.

----------------------------------------------------------------------

You need to start a thread in the Virus & Other Malware Removal section of this site.

Before you post though, you need to read THIS guide.
 

1 more replies
Answer Match 107.52%

Hello,

On July 12th 2012, my computer installed updates. After rebooting and waiting for me on the login screen, I gave it a hard shutdown to check on the BIOS settings (for a little side project, in the end I did not save any changes). After booting and logging in again, I find that many services are not running. I ran a very thorough check for malware and viruses (took over 24 hours to complete), and still no solutions. I have uninstalled/reinstalled my Broadcom 802.11g Wireless Driver several times.
I now look in the Event Viewer and find that the DHCP Client service is not running! It is set to automatic start in Services.msc, but when I try to manually start it, it gives me error 1075 (some dependencies do not exist or are marked for deletion). Running ipconfig, I notice that my system is using an APIPA-formatted address (169.254.x.x), indicating that the computer couldn't find a DHCP server.

My Event Viewer is peppered with:
------------------------------------------------------------------------------------------------
Event 7003, Service Control Manager

The DHCP Client service depends the following service: Afd. This service might not be installed.
------------------------------------------------------------------------------------------------
Event 7001, Service Control Manager

The WinHTTP Web Proxy Auto-Discovery Service service depends on the DHCP CLient service which failed to start because of the following error: The dependcy service does not ex... Read more

A:DHCP Client Service FAILS TO START! (Error 1075)

It sure sounds like your computer is having its share of issues. Did you get the services started that you mentioned in your other thread?

7 more replies
Answer Match 89.46%

Hello all,

I've noticed that a few people have posted concerning this topic, so I've tried to read up on as many possible solutions before posting. I'm recently recovering from a mild virus infection on my computer, and noticed that after I had run Avast! and Malwarebytes to remove the virus, my computer lost its internet functionality. Upon running ipconfig in command prompt, I noticed that the computer was not being assigned an IP address, which lead me to believe there could be an issue with DHCP.

When running services.msc, I notice that both DHCP client and TCP/IP netbios are not running, and when I try to run them, I get an error 1075, that the files are "either non-existent or marked for deletion". I noticed that someone else had posted a very similar problem, but a few of the more advanced fixes seemed specifically tailored for their issue.

Below are the fixes I've attempted thus far -

1. Checked the registry for DHCP?s dependencies (3 are listed, Afd, Tcpip, and NetBT).
2. Reset TCP/IP stack to installation defaults by typing ?netsh int ip reset reset.log? into command prompt.
3. Reset WINSOCK entries to installation defaults by typing ?netsh winsock reset catalog? into command prompt.
4. Ran ?sfc /scannow? with an XP SP3 CD.

I'm currently running Windows XP Media Center, Service Pack 3 on a Dell Inspiron E1505 laptop I had purchased in mid-2006.

A:DHCP and TCP/IP Error 1075

Welcome aboard Please download Farbar Service Scanner and run it on the computer with the issue.Make sure the following options are checked:Internet ServicesWindows FirewallSystem RestoreSecurity CenterWindows UpdatePress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.

7 more replies
Answer Match 89.46%

The full message is error 1075: The dependancy service either does not exist or has been marked for deletion

This started with a tidserv!inf infection. Norton End-Point seems to have deleted all related virus infections, however, I am now unable to start the DHCP service. I have to set a static IP in order to connect to the internet.

I believe tdx.dll was identified as a virus and deleted. it was listed as a dependancy of dhcp but had no descriptor. Currently it is not listed as a dependancy.

I cannot view network shares from this PC nor can I view shares that I host here on other PC's. Only this computer shows up in net places.

I did an sfc /scannow and it told me audiodev.dll and mofd.dll were corrupted and the files in the store have been corrupted.

I had to take ownership with the admin group in order to replace them with extracted copies from my windows cd, but I when I went back to reassign trustedinstaller as the owner it was not listed as an option.

my cd is without service pack and my installed service pack is sp2.

can anyone be of assistance.

A:DHCP error 1075

My dhcp was working for a day but its back down again. i dont know how to recreate the dependancy on tdx

2 more replies
Answer Match 89.46%

Hello,

I'm recently recovering from a mild virus infection on my computer, and noticed that after I had run Avast! and Malwarebytes to remove the virus, my computer lost its internet functionality. Upon running ipconfig in command prompt, I noticed that the computer was not being assigned an IP address, which lead me to believe there could be an issue with DHCP.

When running services.msc, I notice that both DHCP client and TCP/IP netbios are not running, and when I try to run them, I get an error 1075, that the files are "either non-existent or marked for deletion". I noticed that someone else had posted a very similar problem, but a few of the fixes were not available for viewing/download as they were specifically tailored for that issue.

I'm currently running Windows XP Media Center, Service Pack 3 on a Dell Inspiron E1505 laptop I had purchased in mid-2006.
 

A:DHCP and TCP/IP Error 1075

Below is a copy of the Hijack This log.

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 9:03:31 PM, on 12/26/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Alwil Software\Avast5\AvastSvc.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\ehome\ehtray.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\ATI Technologies\ATI.ACE\cli.exe
C:\Program Files\SigmaTel\C-Major Audio\WDM\stsystra.exe
C:\Program Files\Microsoft Office\Office12\GrooveMonitor.exe
C:\Program Files\VERIZONDM\bin\sprtcmd.exe
C:\Program Files\Adobe\Reader 9.0\Reader\Reader_sl.exe
C:\Program Files\Alwil Software\Avast5\avastUI.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\LogMeIn Hamachi\hamachi-2.exe
C:\Program Files\Java\jre6\bin\jqs.exe
c:\PROGRA~1\mcafee\SITEAD~1\mcsacore.exe
C:\Program Files\VERIZONDM\bin\sprtsvc.exe
C:\Program Files\VERIZONDM\bin\tgsrvc.exe
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\system32\SearchIndexer.exe
C:\WINDOWS\system32\wuauclt.exe
C:\Documents and Settings\Shivang\Desktop\HijackThis.exe
C:\WI... Read more

2 more replies
Answer Match 89.46%

DHCP error 1075--can not start the DHCP client on local computer.Dependency service does not exist or has been marked for deletion..

Hi thanks for any help you can give.
Machine is a Dell dimension e520
Win XP Media center edition SP 2

I have the original dell discs and access to a working laptop also running win XP [this one]

During a routine virus scan by avira anti vir it quarentined c:\windowes\system32\drivers\netby.sys.

This disabled the DHCP client so no IP traffic
I restored the file but still no luck

After trying to renew the IP and some searching around I found that the HKEY local machine system currentcontrolset services NETbt registry key is missing

In services DHCP cannot be restarted --gives the warning above.
AFD and TCP/IP are in device manager -non plug & play show hidden devices NETbt is not

Can the registry be repaired from the original discs without having to reinstall everything else?
Or is it as easy as inserting the missing registry key?

Thanks Bob

A:DHCP error 1075

Hi see if this can help How to fix: Error 1075, The dependency service does not exist or has been marked for deletion | Kaliphonia.com

1 more replies
Answer Match 88.62%

Greetings,
I am having a major DHCP error on my girlfriend's laptop. I am primarily a Linux user so I'm kinda lost here as her machine is running XP. It's a Dell XPS M1210 which, conveniently, did not come with a recovery CD or even partition.
Anyway, a few weeks ago her wireless network device stopped working. It would look like it was connecting, but it would hang on "Acquiring network address." At first I thought maybe the device was shot, until I had the chance to test out the wired ethernet, which has the same problem.
After quite a bit of googling, I ran services.msc, and saw that DHCP is not running. When I try to start it from that menu, however, I get this message: "Could not start the DHCP Client service on Local computer. Error 1075: The dependency service does not exist or has been marked for deletion."
After more googling, I discovered that DHCP has only 3 dependencies: TCP/IP, AFD, and NetBt. I checked the registry, and those were the only ones listed.
After even more googling, I ran devmgmt.msc and selected "show hidden devices" and double clicked on "non plug and play devices." I TCP/IP and AFD are both there. NetBt, however, is not.
I've spent hours doing further googling and tried pretty much every fix I could find and nothing seems to work. If the PC had shipped with a recovery CD I imagine this would be easy to fix but alas no luck. I need to get this working so I can set up my new internets and I... Read more

A:Solved: DHCP Error 1075

15 more replies
Answer Match 88.62%

I have read through the original thread (now closed) and tried all it's suggestions. However, I am still having the same IP (on lack of) issues. I ended my efforts with the running of SFC /SCANNOW which took a considerable amount of time, but resulted in no errors of any kind.

I continue to get the Error 1075: the dependency service does not exist or has been marked for deletion, message when trying to start the DHCP Client.

I'm afraid searching the suggested logs for the dependency items it a little over my head.

A little background for my situation. The computer in question is my teenage daughters. A week ago she started having problems with the internet and I'm assuming this is some sort of virus. Whenever selecting a website to launch to, something intervenes and chooses some alternate website. Never the same one twice. I loaded AVAST free version and did a scan. I also updated Malware Bytes and did another scan. I then loaded Kaspersky TDDS killer and did a scan with that. After all that, and roughly 15 files quarantined and deleted, I now have this IP problem. I cannot restore the computer back to an earlier time.

Help would be greatly appreciated!
 

A:DHCP Error 1075 Cont.

16 more replies
Answer Match 86.52%

My computer (vista) was infected with a virus. So I first used rkill/iexplore then ran Malwarebytes Anti-Malware since my protection (Panda) doesn't seem to do its job correctly. The first time I did this, everything seemed to return to normal. Couple of days later, the same virus started up. I redid what I did...and it seemed to work again...until I tried using the internet. (I think Malwarebytes deleted something in the registry?)

There was an error saying that "DHCP error 1075: The dependancy service either does not exist or has been marked for deletion". I googled this on my laptop and followed some of the instructions found online. None of it worked...

I went into device manager->hiddle files->non plug and play drivers:
There was a problem with these with the same code for them: This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)
App Filter Plugin
NetMon Filter Plugin
Panda Net Driver [TDI Layer]
VSCore mferkdk

Finally, I have included the last three logs from Malwarebytes showing which files were deleted by the program.

Thank you for looking over this!!

A:DHCP error 1075- Internet Doesn't Work

There is a dedicated forum for virus/malware issues regardless of your Windows version.
It's here: Virus/Trojan/Spyware Help - Tech Support Forum

(We aren't permitted to give virus removal help on the Windows forums)

2 more replies
Answer Match 84.84%

Not sure why this problem is persisting. I appear to have all the dependent files. I have run SFC/ scannow to no avail. I cannot start the services in question. The 1075 error message continues. I have attached my system info.
 

A:Solved: DHCP client and TCPIP Netbios helper 1075 error

I was able to restart DHCP services by deleting the registry entry and rebooting. I went into the registry editor, located the DHCP subkey, right click on dependonservice and clicked on delete.
However TCPIP Netbios helper I could still not start, even after running sfc/scannow.
The solution for me was to restore the operating system to an earlier point in time. In windows xp, go to programs> accessories>disk utilities> system restore and follow the directions. I suppose I could have done that for both problems? At least I didn’t have to reinstall XP!

Anyway I can connect to internet now
 

1 more replies
Answer Match 84%

Can someone please help, I can't connect to the internet whenever I connect it just connects local only and says the dhcp client isn't working on this computer when I go into services to manual start it says windows could not start the dhcp client on local computer error 1075 the dependency service does not exist or has been marked for deletion it happens on anyones internet I cant connect to wired and wireless, any help will be really appreciated as I have been trying to fix this for weeks now

A:windows could not start the dhcp client on local computer error 1075 the dependency s

Hello, lets do some cleaning up and see if that helps you out .
How to Flush DNS in Windows Using the Command Prompt

Step 1 ? Close all open web browsers and applications on your computer.

Step 2 ? Open the Windows command prompt by selecting the ?Start? menu and then go all programs, accessories, then right click command and run as admin.

Step 3 ? At the command prompt, enter ?ipconfig /flushdns? followed by pressing the ?enter? key. After a moment, Windows will display a message similar to: ?Successfully flushed the DNS Resolver Cache.? Once the message is displayed, the DNS will be flushed removing all incorrect entries.

Then , we want to get the IP reset, so, lets renew its settings and see if this also helps out :
you will type in the command box : ipconfig /release then enter, then next ipconfig /renew then enter, this will reset the IP , now restart and attempt to have it reconfigure its connections to your router. Post back results please.

3 more replies
Answer Match 79.38%

Hi ,

I have windows 2003 sp2 OS on my laptop.

I am unable to connect to internet ( automatically detect IP) , since my DHCP service is not starting.
I followed the below procedure but still not successful.
Please advise.

[Step I - Make sure that the three driver files are present
Open Windows Explorer and navigate to %Windir%\System32\Drivers folder. Make sure that the following files are present in the folder:
? afd.sys
? tcpip.sys
? netbt.sys
If one or more of the above driver files are missing, extract them from the Windows XP CD-ROM or from the ServicePackFiles\i386 folder, whichever is the latest version.
Step II - Verify the number of Dependencies
From other sources in the Web, I've found that installation of Norton Antivirus (NAV) adds an entry to the DHCP Service dependencies, and removing NAV does not remove the corresponding entry from the DHCP Dependencies.
To view the dependency services registered for DHCP Client Service, type the following command in Start, Run dialog:
CMD /K SC QC DHCP
Verify the output. It should be exactly as below:
[SC] GetServiceConfig SUCCESS

SERVICE_NAME: dhcp
TYPE : 20 WIN32_SHARE_PROCESS
START_TYPE : 2 AUTO_START
ERROR_CONTROL : 1 NORMAL
BINARY_PATH_NAME : C:\WINDOWS\system32\svchost.exe -k netsvcs
LOAD_ORDER_GROUP : TDI
TAG : 0
DISPLAY_NAME : DHCP Client
DEPENDENCIES : Tcpip
: Afd
: NetBT
SERVICE_START_NAME : LocalSystem
If additional entries are listed under DEPENDENCIES...
If any other additio... Read more

More replies
Answer Match 78.12%

When I try to start the DNS server service on a windows 2000 server it won't start and gives me an error 1075 and says "The dependency service does not exist or has been marked for deletion. Any suggestions, help or advice would be gratefully appreciated.
 

A:Server DNS Issue - Error 1075

Take a look at this see if it helps:

http://support.microsoft.com/kb/839089
 

1 more replies
Answer Match 77.28%

i have been fighting with this problem for ages.
my sound does not work, i dont know why, as far as i know, nothing was added before this started, everything was working, i got up the next day and there was no audio, it no longer registers my disc drive as being there, and i cant play an videos from youtube (other sites fine, though still no audio)
laptop tells me, theres no audio installed, but all drivers state everything present. tried on here before but with no luck

heres a run down from my last post:

i have no audio. if i click troubleshoot problems it says the audio service is not running
it says the windows audio and endpoint builder arent working
if i go into services, windows audio is set to automatic but its not on, when i click start it says "error:1075 the dependency service does not exist or has been marked for deletion"

medion akoya e6214 notebook
windows 7 64 bit sp1 home premium edition
intel core i3cpu [email protected]
4gb memory
2 ram i think
also, i have no system restore points, the windows repair disc doesnt work and i have no windows 7 install disc and cant burn one as my disc drive wont register

i have installed drivers for medion akoya as instructed but it did nothing

windows audio still states its not working, when i go to services, its set to automatic but wont stay on and i get the above error message!

im at my wits end, i cant back up anything so i dont lose it, cant restore, or repair, sfc scannow says i cant do it unless im admi... Read more

A:windows audio: error 1075 the dependency service does not exist or has

From your description there are many more problems than just the windows audio error.

I would suspect an Operating System problem. If you can find a friend to download the Windows 7 Home Premium ISO and burn it to a DVD, that would give you the needed disc to try and repair Windows. Although your DVD drive does not work in Windows, it should work for booting.

Here is the link to the forum post. There are links to the various versions. You can download the same version that you have.
Official Windows 7 SP1 ISO Image Downloads | Windows 7 Forums

4 more replies
Answer Match 77.28%

I have a similar problem.... turn on print spooler, then go to add a printer and it says the print spooler is not running. round and round I go.

More replies
Answer Match 76.86%

Hello there, can i firstly say I am a complete computer noob so i apologise if this is in the wrong section/not helpful.....ill give as much info as i possibly can

My OS is windows xp7(I looked around but i dont know how to get the system information like in other posts?? sorry, hopefully not needed), i recently got infected with a virus/trojan through watching films (should hopefully be gone now i installed new mcafee), and my brother tried to help by deleting everything that he thought wasnt important......

this led to the dhcp client not working, after 2 hours of googling i have found out it needs dependencies.....2 of these are working fine, however one - NetIO legacy TDI Support Driver - will not start for some reason and comes up with.....
Device status
This device is not present, is not working properly, or does not have all its dirvers installed. (Code 24)

It asks to check for solutions, but when i push this a box comes up for like a nonsecond before instantly dissappearing.....soooo is there any possible way that this can be restarted easily or does it need an expert to get onto it ??

Any advice would be very much appreciated and really help me out as ive just been made redundant and really cant afford new computer And again apologies if this is in the wrong section or not useful info, but its the best i can give without knowing hwo to get specific machine details/stats and i presume its a problem with windows

More replies
Answer Match 76.44%

Hi when i try to run my windows XP sp2 windows firewall to stop it from disabling my connections. i get the message "Windows firewall cannot be displayed because the associated service is not running. Do you want to start the Windows firewall/internet connection Sharing (ICS) service?" i click yes then i get "Windows cannot start the Windows firewall/internet connection sharing (ICS) service.". i then went start>run>services.msc and found that when i try to manually run the Windows firewall/ICS i get this message "Could not start the WF/ICS service on Local Computer. Error 1075 the dependancy service either does not exist or has been marked for deletion." Please help me. I just want to be able to open my ports and host Warcraft 3 games.
 

A:Windows Firewall/Internet Connection Service cannot start...error 1075.

6 more replies
Answer Match 76.44%

Apparently something called print spooling is not working on my computer. I get error message 1075: the dependency service does not exist or has been marked for deletion. I believe this is why the installation won't go all the way to the end. The computer recognizes the printer but won't go ahead and finish installing it. Anybody got any suggestions?

A:Printer installation won't complete. Error 1075: the dependency service does not exis

Are you using Windows ME or Windows XP?

14 more replies
Answer Match 75.6%

As of recently, I may have edited one registry after previously messing with a registry deletion using AVP cleaner. Now my LAN internet connection won't get past Acquiring Network and also my IP/Subnet are both 0.0.0.0 and my default gateway is blank. Someone please help me please
 

A:DHCP & TCP/IP getting #1075 Errors

16 more replies
Answer Match 73.08%

I had a couple of errors in my system log, and when I looked them up, Microsoft told me to stop the Microsoft DHCP Server, but it isn't in my list. This error causes my internet to freeze, so if anyone would know how to fix this or access this "service" it would be greatly appreciated.

A:Unable to find Microsoft DHCP Server Service.

What operating system are you running? Windows XP Home and Pro do not include a DHCP server so I question the appropriateness of Microsoft's suggestion to stop a service you may not have.

If you mean DHCP client, then that can be turned off. However, you need to assign a static IP address and configure your router or modem to not try assigning the same address.

6 more replies
Answer Match 69.3%

I can't obtain an IP address or get on the Internet. When I look at my list of services, it shows DHCP Client in a "starting" mode but never completely starts as it should. I have searched for help from Microsoft's knowledge base but can't find a cause or soltion. Thanks for any and all help!
 

A:DHCP Client Service Stays in "starting" mode

Is this such a difficult problem that no one can help me? Please?
 

1 more replies
Answer Match 68.88%

Hi

Can anyone help please. My printer is networked from my pc to my laptop but all of a sudden it is no longer printing from the laptop.

The pc is saying the "server service is not starting Error 87" parameter incorrect whenI try to start it. Also the computer browser is disabled and I am unable to start it.

I am not very technical so any instructions need to be fairly straightforward please.

Thanks for any help.
 

A:Server service not starting

13 more replies
Answer Match 68.88%

I have just installed a netgear pci network card into a Win NT machine.
installed it with the disk provided no problems
but after I re-started i get an error message
i go to event viewer and it is tellign me:
'The server service started with the following error: Not enough server storage is available to process this command'
and
'The computer browser service depends on the server service whcih failed to start because of the following error: Not enough server storage is available to process this command'

any ideas what the actual problem is?
as i can see the network, copy files from server etc, the only thing I can see its is not doing is carrying over users security info correctly

any help would be appreciated
 

A:Server Service Not Starting

8 more replies
Answer Match 68.04%

Event viewer shows no errors. I can manually start it without problem but it does not start on bootup. I set it to disabled then rebooted and set it back to Automatic but it still won't start. This of course also makes the Computer Browser service fail as well.

I am doing a virus scan but I don't think it will find anything this PC looks pretty clean and does not show viral systems. Any ideas?
 

A:Server service not starting though its set to automatic.

7 more replies
Answer Match 68.04%

Okay this one is strange -

No errors in event logs.
Server service is no started up but is set to automatic.
Changing service startup type rebooting and changing it back to automatic does nothing.
Going to command prompt and typing in net share yields an error about Server serivce not started and a y/n question if you want to start it.
Once enabled it stays enabled for a couple of hours and then goes back to stopped. (This may be due to reboots on the users part I have not had a chance to look into the stopping part.)

All of these machines are virus and adware/spyware clean.

What can I do to try and get the serverservice to start up each time windows starts? Are there registry settings i can look at?
 

A:Handful of XP PCs - Server service not starting.

6 more replies
Answer Match 68.04%

Been advised to pick your brains on here so here goes...

XP SP2 Media Centre Edition.

I doubt I can descibe my problem better than I've already done here.

Anything worth trying?

No emails currently downloaded on this pc, and no p2p software. (although we run Spybot, AVG, etc) daily.
 

More replies
Answer Match 67.62%

Hi,
I have installed the evaluation version of sun one web server 4.1 sp14 in my windows xp professional box. i am able to start the admin server but i could not start the iplanet web server instance. This server is there in sun website mentioned for windows NT. do i need to do something for windows xp professional?

After getting into the admin server, i am clicking the Manage Server option. there, i have the On/Off Link. I am clicking that link, but the server keep on telling me that it is Off. so i could not run any pages with the iplanet web server instance.

I need to execute a Server Side Javascript Application in this server. Other servers are not having the JSAC tool for doing this.

could anyone help me on this asap?
 

More replies
Answer Match 67.62%

Hi everyone
I've got a problem I hope someone can help me with. I have an issue with my server service not starting. I asked aboutr this earlier and shadypac was kind enough to post this link:
http://www.jasonhartman.net/2005/01/problem-starting-server-and.html
which helped me initaiting the start up but unfortunately it just now says "service starting" and I still can't share. Am i missing something I need?
Cheers Andy
ps be kind I'm a beginner!!
 

More replies
Answer Match 67.2%

I've searched through here a bit and it seems like others have had this problem, hoping I can find a solution.

Recently bought a new machine after my old computer's motherboard died. HP desktop running Vista Home Premium, 3GB ram, 3 ghz processor. Networking was working fine at home, and I was actually enjoying the whole experience more than I expected coming into Vista. Yesterday I took the computer to a LAN party, and as soon as I got there the problems began.

On startup at the LAN party, I noticed that the network connection icon had the red x, and said network status unknown. After about an hour of searching around, I found that the issue stemmed from the DHCP Service's inability to start properly. (Also, ironically, the system event viewer service is unable to start as well, which restricts me from viewing the error log, as far as I can tell.)

Some system info I've seen requested before related to this problem:


Code:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\Newman>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : COMP-2
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
Physical Address. .... Read more

A:DHCP Service Cannot Start (Error 5)

There is a link in here that might be of assistance: Cannot start Dhcp client

19 more replies
Answer Match 65.94%

Starting yesterday I haven't been able to connect to my network via Ethernet.

I'm using the onboard network adapter from my ASUS M2N32-SLI Deluxe mobo and Vista Ultimate 64 Bit. Under device manager my network adapter is NVIDIA nforce 10/100/1000 Mbps Ethernet. That's a generic name, I checked my mobo specs and it's specifically a NVIDIA nForce 590 SLI MCP. I have the latest driver which is 67.8.9.0. My router is a Linksys WRT54GSv4.

I want to use a dynamic address, I have a static IP set up on my wireless and that's working fine right now. But I can't connect using either of my Ethernet ports. I've switched ports on my router, but my 360 connects no problem so I don't think it's the router.

Under network connections my Local Area Connection is stuck on "Identifying..." If I double click it and click details I have no default gateway. Belarc Advisor tells me DHCP Server: none responded.

I've been researching the problem as much as I can. So my DHCP Client Service Won't Start, I get Error 1068 Which is the dependency services or group failed to start. The dependencies I have for the DHCP Client Service are

Ancillary Function Driver for Winsock
NetIO Legacy TDI Support Driver > TCP/IP Protocal Driver
Network Store Interface Service> NSI proxy service

Under services I can see that Network Store Interface Service is running. I ftyped net start AFD on cmd I was told that the service is already running. So that leaves TCP/IP, but I am able to ping 127.0.01... Read more

A:DHCP Client Service Won't Start - Error 1068

Originally Posted by Tyler1986


Starting yesterday I haven't been able to connect to my network via Ethernet.

I'm using the onboard network adapter from my ASUS M2N32-SLI Deluxe mobo and Vista Ultimate 64 Bit. Under device manager my network adapter is NVIDIA nforce 10/100/1000 Mbps Ethernet. That's a generic name, I checked my mobo specs and it's specifically a NVIDIA nForce 590 SLI MCP. I have the latest driver which is 67.8.9.0. My router is a Linksys WRT54GSv4.

I want to use a dynamic address, I have a static IP set up on my wireless and that's working fine right now. But I can't connect using either of my Ethernet ports. I've switched ports on my router, but my 360 connects no problem so I don't think it's the router.

Under network connections my Local Area Connection is stuck on "Identifying..." If I double click it and click details I have no default gateway. Belarc Advisor tells me DHCP Server: none responded.

I've been researching the problem as much as I can. So my DHCP Client Service Won't Start, I get Error 1068 Which is the dependency services or group failed to start. The dependencies I have for the DHCP Client Service are

Ancillary Function Driver for Winsock
NetIO Legacy TDI Support Driver > TCP/IP Protocal Driver
Network Store Interface Service> NSI proxy service

Under services I can see that Network Store Interface Service is running. I ftyped net start AFD on cmd I was told that the service is already running... Read more

25 more replies
Answer Match 65.94%

Hi,

I have Windows XP SP3 installed on my desktop and suddenly my LAN/NIC is not receiving and sending packets from my network. The DHCP Client Services and TcpIP services wont start it gives error from the above.

From the device manager of non-plug and play drivers, the tcpip protocol driver, ip network address translator and netbios over tcpip has exclamation point. When I uninstall the drivers and start the services the connection is established but when I shutdown/restart the PC it will came back again the issue.

AFD is running

Below drivers are present in system32\drivers folder.

afd.sys
tcpip.sys
netbt.sys
Any ideas?
 

A:DHCP Client Service Won't Start - Error 1068

Hello,

I update the system and the LAN driver but still the issue exist.

I copy the netbt.sys from a working machine and paste that to the non-working machine. Same problem.

Is there other way resolving this issue aside from repairing or fresh install of the OS?
 

2 more replies
Answer Match 64.26%

My wife's laptop runs Vista Business SP1. It is in a Server 2003 domain. She connects through my wireless AP, but the DHCP service is actually provided by a Pix firewall. I have 3 other laptops running XP that all connect fine, and so do all wired clients. The Vista laptop only gets an internal connection and an auto-configuration IP. The DHCP client is not running (see the error in the event log below).All this started a couple of days ago. I am not aware of any configuration changes that conincided with this issue.Everything seems work fine with a static IP address, but that's not a solution.I found a few threads that talked about a similar issue that was resolved by adding full permissions to two registry keys for the Network Service account. This did not work for me. It sounds like my issue could be related to this and this, but the laptop here worked fine for years in the exact same configuration. Alas, everybody seems to be in the dark about this issue.Is there really no solution but reinstalling Vista?Log Name:      SystemSource:        Service Control ManagerDate:          2009-06-23 22:54:15Event ID:      7023Task Category: NoneLevel:         ErrorKeywords:      ClassicUser:          N/AComputer:      [...]Description:The DHCP Client service terminated with the following error: Access is denied.

A:DHCP Client service fails to start with Access Denied error

Hi, thanks for the post. In order to narrow down the issue, you can collect log file on this issue.  
 
On the problematic computer, restore original settings and make sure you can repro "Access Denied" error. Then, follow below steps to collect data.
 
1. Download process monitor from
 
http://download.sysinternals.com/Files/ProcessMonitor.zip
 
2. Extract ProcessMonitor.zip to the problematic client.
3. Run Procmon.exe (Process Monitor)
4. Reproduce this issue.
5. Click File->Save from Process Monitor, compress and send the log files to me.
6. Send ?access denied? screen capture to me.
 
Repeat Step 1 - 6 on another machine with this kind of issue and send data to me. You can send it to me via [email protected] Zhu - MSFT

8 more replies
Answer Match 64.26%

I'm running a simple network at home with a Linksys BEFSR41 router. I have two computers hooked up wired and a wireless router acting like an access point that I use for my laptop occasionally. Until this weekend I've been having no problems but I shut down the computers due to weather and now one of them is not able to communicate with any others on the network. The problem computer will get an address supplied to it by the router (DHCP server) but once it has it I cannot get any other connectivity. Of course this is hindering internet access on this computer. I can ping the loopback and assigned IP addresses w/o problems but when I ping the default gateway (router) and/or the other computer I get "Request timed out." I initially thought it was the NIC so I bought another one but still get the same issue. I've moved the cards to different PCI slots but no luck. I tested the cable running from the computer and the router but found no problems. I even tried resetting the TCP/IP stack but still didn't work. The computer in question is running WinXP SP2 with the original NIC being a Linksys LNE100TX and the new one being a D-Link DFE-530TX+.

Any clues on this? If more info is needed let me know--it's been a while since I've posted. Thanks in advance.
 

A:Solved: Getting IP addr from DHCP but cannot ping DHCP server

11 more replies
Answer Match 64.26%

I need the IP address ,DNS and gateway address so on .Is it possibile to get it from the modems DHCP or do I need the ISP DHCP working?

I'm setting up are home network and getting connected to the internet but the internet connection is down .But is it possibile that I can get this from the modem. .

Like how does the computer talk to the modem and the modem talk to the DHCP server .I never had this problem before.
 

A:Can you get DHCP info from the modem software even when the DHCP server is down

8 more replies
Answer Match 63.42%

Trying to create and deploy a Windows 7 pro image for Dell optiplex 390s. Getting the dreaded error above when trying to connect to the DHCP. After a couple days of research I've tried injecting drivers, different version of drivers, injecting drivers into
a different boot image, changing the name and/or deleting the setup.exe file from the image, verified that spanning-tree portfast was enabled on the switch, and edited \windows\system32\startnet.cmd. Everything i've tried results in the error still showing. 
When running ipconfig it looks like the NIC is not even initializing which leads me to believe it's a driver issue still. I'm out of ideas on this one. Anyone else have any?

A:WdsClient: An error occurred while obtaining an IP address from the DHCP server

Yes, I agree that this seems to be a driver issue.
Please follow the steps below to find the correct NIC driver for the problematic clients and create a new boot image, then add the NIC drivers to the new boot image for a test.
Error message when you start a PXE client to connect to a WDS server on a Windows Server 2003 SP1-based computer or on a Windows Server 2008-based computer: "WdsClient: An error occurred while starting networking"

http://support.microsoft.com/kb/923834Thanks
Zero
Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

8 more replies
Answer Match 63.42%

I have a problem with a Dell Latitude E5540 i cant image the laptop i received the following message:

WDSclient: an error occured while trying to obtain an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment"
When i try to image another Dell Model laptop for example Dell Vostro it is possible to image

Can someone help me with this issue ?

regards
 

More replies
Answer Match 63%

QUESTION #1:
Is it better to use Win2000 Server DHCP or DHCP from my Netgear wireless router?

#1 BACKGROUND:
I am currently in the process of setting up a Win2000 server on my home network which consists of four other 2000/XP machines.
The server is going to be configured as a domain controller and will utilize the Active Directory.

Should I use the Win2000 Server DHCP or stick with my wireless router as the DHCP server? What are the advantages/disadvantages to both and which would be easier to maintain.

QUESTION #2
Is a 550mhz PIII with 256MB RAM fast enough to make a good home server running Win2000 server?

BACKGROUND #2
The server is going to have (2) 120GB Western Digital 7200rpm drives with 8MB cache for storage and a single 60GB Western Digital 7200rpm drive for the OS and few other applications.

The server's primary function is to serve as a media server with an approaching 10GB of MP3 and music video files which is continually going to grow. Disk contention is at a minimum since there are only four PC's on the network. There will also be a lot of digital photos stored on the server and will also serve as a place to perform backups from the other four networked PC's.
 

A:Win2000 Server DHCP or Router DHCP?

We have a similar setup in our office using Small Business Server, a public IP coming into our router with DHCP turned on, connected to a NIC in the internal DHCP server (which is also running ISA). A second NIC in the server bridges to the internal hub to provide DHCP services to the clients. This way we control port filtering in 2 places and with 2 levels of NAT taking place we feel secure. It may be overkill but we're concerned that EVERYONE is trying to hack into ISA and DHCP servers connected directly to public IP that this setup provides an added level of security.
 

1 more replies
Answer Match 63%

My WinXP Home PC won't connect properly (limited connectivity/no internet) via ethernet cable to my router (Belkin N150).

Ipconfig /all shows the IP address as 169.254.117.71 but this is determined by an entry in the registry at HLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{39A...} > 'DhcpIPAddress' - REG_SZ - 169.254.117.71. Also listed at 'IPAutoconfigurationAddress'. My laptop connects fine plugged into the same port getting it's IP automatically (192.168.2.2) and getting internet fine.

After much searching I can't figure out what's wrong.

I've tried adding a DWORD entry 'IPAutoconfigurationEnabled' = 0, also tried deleting the 2 values.
Tried setting the IP manually to 192.168.2.6 - limited connectivity goes away but I get no internet connection from the router nor file sharing.

Any help please?
 

A:Solved: DHCP IP by registry not by DHCP server??

8 more replies
Answer Match 62.16%

I purchased a Netgear Push2TV PTV3000, and updated the firmware, downloaded the latest Intel WiDi, and tried to connect. The search for WiDi adapters found the PTV3000, so I double-clicked to install it. Add a Device ran, but could not find the PTV3000.
Searching the Web I found I needed to insure WiDiApp and Wireless PAN DHCP Server were allowed through the firewall. I found that the WiDiApp was listed in, and allowed through the firewall. I could not find any mention of Wireless PAN DHCP Server in the firewall.
I found the entry in Services, and it was listed as Manual. I set it to Automatic and tried to Start the service. I received an Error 1067: The process terminated unexpectedly.  I am running Windows 8 on a Sony SVS15118FXB.
As a possibly associated issue, since I believe Bluetooth also uses the Wireless PAN DHCP Server, I cannot get Bluetooth to function on the same computer. Attempts to connect Sony Bluetooth speakers also fail.  Maybe the same issue?
Any help would be most appreciated...

A:WiDi can't connect, found Wireless PAN DHCP Server can't start with error 1067

Please post in Windows 8 forums.Arnav Sharma | Facebook |
Twitter Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

3 more replies
Answer Match 61.74%

I am trying to install the free version of AVG on Windows XP and keep getting the following message....
Error: Action failed for file avgmfx86.sys: starting service....
Error 0x80070002

does anyone know how to fix this?

Thanks

Stephanie Boulton
 

A:Error: Action failed for file avgmfx86.sys: starting service.... Error

Are there any other antivirus or antispyware programs installed? I have found that that will cause this service to not start since multiple antivirus softwares installed can cause problems.

Also, another option is to uninstall/re-install AVG.
 

1 more replies
Answer Match 61.74%

Hi, all!
 
I have MS Win XP Pro SP3, and during bootup I am receiving the following Event Viewer Log Error and Warning: 1002 and 1003. I have a ZyXEL P-2812HNU-F3 wireless router and a D-Link AirPlus Xtreme G DWL-G132 Wireless USB Adapter(rev.A).
 
In an attempt to resolve this issue on my own, I have already tried the following ipconfig commands: /showdns, /flushdns, /release and /renew, but unfortunately to no avail.
 
Sadly it turned out to be somewhat risky to run ipconfig /release and ipconfig /renew, as the Event Viewer Log afterwards showed that the Adobe Flash Player Update Service had trouble running, and therefore sent hourly repeating start and stop messages. And hence of course uninstallation and reinstallation was required to resolve the issue.
 
I have also ran FSS and Farbar MiniToolBox, of which logs both came back clean. And I will post these logs upon request. I also have Net Adapter Repair All in One.
 
But now, as to the possible culprit; I suspect malware, however the malware itself has been removed, as I have ran approximately 40 anti-spyware programs, thus eliminating somewhat 300-400 threats totally. So, IMHO my computer is close to spyware-free. I remember having had this particular problem ever since I first started the removal of spyware.
 
However, I do not have any problems connecting to and browsing the Internet, it is just these error messages that are bothering me. I understand that this is a minor issue, but I wou... Read more

A:Event Viewer Error 1002 & Warning 1003 - The DHCP server sent a DHCPNACK message

I suspect a memory issue.. but lets do this scan first.ESET Online ScannerHold down Control and click on this link to open ESET Online Scanner in a new window.Click the button.For alternate browsers only: (Microsoft Internet Explorer users can skip these steps)Click on esetsmartinstaller_enu.exe to download the ESET Smart Installer. Save it to your desktop.Double click on the icon on your desktop.Check "YES, I accept the Terms of Use."Click the Start button.Accept any security warnings from your browser.Under scan settings, check "Scan Archives" and "Remove found threats" Click Advanced settings and select the following:Scan potentially unwanted applicationsScan for potentially unsafe applicationsEnable Anti-Stealth technologyESET will then download updates for itself, install itself, and begin scanning your computer. Please be patient as this can take some time.When the scan completes, click List ThreatsClick Export, and save the file to your desktop using a unique name, such as ESETScan. Include the contents of this report in your next reply.Click the Back button.Click the Finish button.NOTE: Sometimes if ESET finds no infections it will not create a log.

10 more replies
Answer Match 61.32%

I can't start the Security center started
It says " Error 1068 failed to start when trying to start services"
So i search and notice that it depends on "windows management instrumentation"
I tried to view the fourth tab "dependencies"
then it says"win32:Error 1068 failed to start when trying to start services"
and it shows nothing inside the dependencies box.

I tried the Microsoft Fix it 50562,got the same results.

Also I tried sfc /scannow and it tells me "fixed", after restarting the computer,
i still got the same error.

Is there a way to fix this?

A:Error 1068 when starting service,dependencies win32 error

mfimftw,

Please use the following diagnostic tools. They may help us get to the cause of your issues:

Please use the Farbar Recovery Scan Tool.
Download: http://www.bleepingcomputer.com/download/farbar-recovery-scan-tool/
Select the version that applies to your system.
Save it to your Desktop.
Double-click the downloaded file to run it.

When the tool opens click Yes to the disclaimer.
At the program's console, press the Scan button.

When done, the tool produces a log, FRST.txt, in the same directory from which the tool is run (Desktop).

Please provide the FRST.txt in your reply.

The first time the tool is run, it also makes another log: Addition.txt
Also post the Addition.txt in your reply.


Also, use the Farbar Service Scanner
Download: http://www.bleepingcomputer.com/download/farbar-service-scanner/dl/62/

Let's get a view of all services and dependencies scoped by the tool...

Make sure the following options are checked:

Internet Services
Windows Firewall
System Restore
Security Center
Windows Update
Windows Defender
Press: Scan

When done, FSS creates a log, FSS.txt, on the Desktop.

Please provide the FSS.txt in your reply.

Thank you.

6 more replies
Answer Match 61.32%

I have a machine running VNC, a 2000 pro box I believe, and I am having trouble accessing it.

I have tried restarting the vnc service with a remote mmc to services, but I get the following error:

Code:
Could not start the VNC Server Version 4 service on MACHINENAME

Error 1053: The service did not respond to the start or control request in a timely fashion
and then

Code:
Unable to query status for service VNC Server Version 4. The remote connection on MACHINENAME has been broken.
Code:
The system encountered the following error while reading the list of services on MACHINENAME

Error 6: The handle is invalid.
Then all the services disappear.

I have also tried:

Code:
psexec \\machinename cmd
net start winvnc4
which gives the following error

Code:
The service is not responding to the control function.
Then I get

Code:
Error communicating with PsExec service on soupdragon2
The specified network name is no longer available
Any ideas how I can fix this and get my vnc back short of rebooting? (people are using this with long running processes so I am not in such an easy position to reboot)
 

A:Error starting VNC service

By any chance is your application log full in the event viewer? If so try clearing it and try starting the service again. If thats not the issue at all, I cant see anyway around it but a reboot
 

1 more replies
Answer Match 60.9%

Hi, This is praveena, i hav created an application "LCD_Displayer.exe" in visual studio6.0 (VC++) and i want to run this exe as an Service in the windows xp PC. so i hav created an another application to execute the "LCD_displayer.exe" as an service. Now am able to install the lcd displayer exe as an service, but while starting the service i get an error stating "Error 1053: The service did not respond to the start or control in timely fashion." Can any of u send me the solution for the problem i am facing, as it is very urgent to release the software.

thanks & regards,
pravina

More replies
Answer Match 60.06%

I am trying to send netsend messages across my network, but i found that the messenger service ahd been disbaled. I set it to automatic and tried starting it but i got the following message -

"Could not start the Messenger service on Local Computer.
Error 1058: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it"

i tried microsoft.com, but dont have help for this situation.
i also tried googling to no avail... and a search of this forum got didnt get any results either....

hope url can help,
thanks
- Rav
 

A:Error 1058 when starting messenger service

anyone?
 

1 more replies
Answer Match 60.06%

When starting the Power Service, either via "net start power" or via Start + right-click Computer + Manage menu item + Services + right-click Power + Start menu item, results in "Error 5: access is denied".
This occurs running on the Administrator account, and accounts with Administrator access.
Thanks in advance for any help you may be able to provide.

More replies
Answer Match 60.06%

Hi,

Working with an XP machine and want to activate fast switch users.

From services.msc I tried to restart terminal services but I get the following error.

Error 126: The specified module could not be found when starting a service

I have tried to follow the following instructions on how to fix the issue

Error 126: The specified module could not be found when starting a service

But cannot locate the service.dll file on either a working XP machine or the machine I having the issue with.

Can you please advise where the service.dll file so that I can copy the file from the working PC to the pc with the fast user switching issue.

Best Regards
Mark

A:Error 126: The specified module could not be found when starting a service

issue resolved, found the termdll file.

2 more replies
Answer Match 60.06%

i recently had some issues with malware/ spyware. I removed as many as i could find with spybot s&d and windows security essentials then cleaned with ccleaner. Since then i cannot turn on file and printer sharing. After googling round a bit i ran some of your tools which seem to have solved a lot of the issues i was having, however within control panel/admin tools/services i fnd that computer browser is not starting, if i tell it to start it seems to be ok, but then immediatley stops wit no error code. please Please can someone help? i have tried everything i can think of and just cannot get it sorted! Thanks, Chris.

A:computer browser service not starting with no error

"Computer Browser" service is related to networking being able to find/search/maintain connection/browse other systems on the network. With that said there is other dependencies needed to also run for "Computer Browser" service to function properly. Both "Server" service and the "Workstation" service is also needed to run. Setting all to automatic and rebooting the system should fix it.

2 more replies
Answer Match 59.22%

Okay, I have been having issues with my network etc. for a long time now and I fixed it, but during that adventure I found that Windows Firewall isn't working right. The exact issue is when I try to go in and start the service manually I get "Error 1068: The dependancy service or group failed to start." I know I have the required services runnung except the Internet Connection Sharing service which gives me the same error. I have tried reseting winsock and all that other stuff but it just dosn't work.

Thanks in advance.

A:Error 1068 when starting Windows Firewall Service

Welcome to the forum
Did you try to see the solution :

Unable to start Windows Firewall
Good luck

2 more replies
Answer Match 59.22%

Trying to configure a Win 2003 Server

When trying to Add the DNS Role via Manage the Server

It will install but an error says that it cannot start the DNS Service

When I manually try to start it via Services get the following Error

error 1222: the network is not present

At the moment this is on a standalone, un-networked Desktop
 

More replies
Answer Match 59.22%

Hi,
I was following a thread here with my trusted techguy support forums trying to get rid of spyaxe. I was following this particular thread, http://forums.techguy.org/t418233.html, unfortunately, I was getting frustrated, got confused and seem to have deleted the real svchost (c:\windows\system32\svchost), not the trojan. Frankly, I'm still not sure what happened. But as soon as I deleted it, my computer shut down, and since then, well, here are my symptoms:
-When starting up, in the user login page, I get a NAV ALERT that says "Error starting RPC server.
-The computer moves at crawl speed.
-I cannot move (drag or paste) files at all.
-Local Area Connection and "sympatico" icons are unresponsive.
-Many programs are unresponsive or simply do not open.
-Search is unresponsive.

I could only think of 2 solution. First I tried system restore (which is on) but I get this message whenever I click it: "system restore is not able to protect your computer. Please restart your computer, and then run system restore. Restarting the computer doesn't help and neither does trying it in safe mode.
The other idea I thought of was finding the backups to killbox (what I used to delete the file) and hopefully I could replace it. I don't know if that makes sense. I found what I think is the backup folder, but I can't open them. Here's an example of their file names, perhaps this will help you verify if this is the right folder: "backup-20051202-1... Read more

A:Solved: Error starting RPC server

12 more replies
Answer Match 58.8%

Have a Lenovo Yoga 2 running Windows 10. Booted up the computer this morning and received the following error message: "Error starting local HTTP service for Lenovo Service Bridge. Please check if one of the following ports is available: 50123, 50124." Couldn't connect the computer to the internet, even though it showed the computer is connected to Wifi. Tried uninstalling service service bridge and it uninstalled successfully I think. Rebooted and then got temporary spuratic internet access for a moment but now it is gone again. Has anyone had this same problem and solved it? Please help. I'm not particularly skilled at Windows troubleshooting so any help and advice you can provide will be much appreciated. (P.S. I have lots of trouble with my computer since upgrading to Windows 10)

More replies
Answer Match 58.8%

I have a Hp pavilion dv4-1225ee laptop. I was installing windows 7 in my laptop last night. I was sleepy so I switched off the laptop during the setup. In the morning when I switched on my laptop there is no display. So I attached an external monitor. When I put the windows 7 dvd, the hp logo comes and then there is a dash ( I dont get the press any key to boot) and then I get "Setup is starting services" error. When I press Ok. The same procedure is repeated. Please help.

A:Press any key to boot not showing & Windows starting service error.

Switched off the laptop during the setup??!! You should change your username to booboofaisal. Run windows install again, whats the mystery?

9 more replies
Answer Match 58.8%

IP Network: Dhcp server works fine. (CISCO ROUTER)

Windows 200o servers, Windows 2000 clients (up to dated, sp4, rollup1 etc) IS6sp1

Some pc's with IP dhcp , works ok
Some pc's with fixed IP, works ok

After changing fixed IP on a client to dhcp-IP, the client can not find the DHCP server.
change back to fixed IP, PC works fine again.

DHP server and other DHCP clients still working fine

Local Area connection status: only outgoing packets, no incoming.

reboot, or ipconfig /renew no solutions

Does someone know this problem ?
Pieter
 

More replies
Answer Match 58.38%

I recently had to reinstal Windows XP Media Center SP3 operating system on my Dell Inspiron 9300 laptop. When trying to install Pure Networks Net Magc Pro it will not run as it says the platform service is no running. When I try to start the platform service I get the following Error 1075: The dependency service does not exist or has been marked for deletion.
Does anyone know how to correct this situation.

Thanks.

A:ERROR 1075

Why not post to the NetMagic forum. You will have more luck there then in this
General Microsoft Forum

2 more replies
Answer Match 58.38%

My computer is stuck on "Acquiring Network address". I have tried to go into the services, and turn on the DHCP Client, however I get an Error 1075: The dependency service does not exist or has been marked for deletion, and it will not start. I am running Windows XP Home Edition, SP3. I thank you in advance for the help.

A:Error 1075

Hi -See if this reset works first. Please read carefully -TCP/IP NetBIOS Helper error 1075 TCP/IP stack repair options for use with Windows XP with SP2/SP3.Start, Run, Type CMD to open a command prompt:In the command prompt window that opens, type the following commands, each followed by the Enter key:Note: Type only the text in bold for the following commands.Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalogReboot the machine. Thank You - EDITED to reset commands -

12 more replies
Answer Match 58.38%

My internet will not connect It Keeps saying Acquiring network address, I have tried everything even going into Services.msc to Start DHCP client and it gives me this error
Error 1075, The dependency service does not exist or has been marked for deletion

I am running Windows XP Home Edition SP3 and its Dell

A:Error 1075

First , you may have done this but ..... check if you can start the dependency service for DHCP client service.To view the dependency services registered for DHCP Client Service, try the following steps? Click on Start and them type cmd and press Enter? In the command prompt type: CMD /K SC QC DHCP - Please note the spaces -? Press Enter check if the dependency service is started.Verify that the Dependency Service / components are runningNext -To verify that the three dependency components are running. Follow the steps below:? Click Start, Run and type DEVMGMT.MSC - No spaces -? In the View menu, click Show hidden devices? Double-click Non-Plug and Play drivers section? Double-click the entry AFD, and click the Driver tab? Set the Startup type to System.? Start the service. Note down the error message if any.? Similarly start the two other drivers namely:? TCP/IP Protocol Driver? NetBios over Tcpip? Close Device Manager and restart Windows.? Now check if you can start the DHCP service.Let us know if you have done all this, and we can look for more ideas -

4 more replies
Answer Match 58.38%

Avg found two trojans. It didn't seem like it removed them. Internet was working though. Ran malwarebytes it found nothing. Internet was still working. Started Having connectivity issues. My dhcp client service won't start. I got a 1075 error. my internet via wifi or wired won't work. I ran the following command prompts:
net start AFD (response: the requested has already been started)
netsh int ip reset reset.log (response: resetting echo request, failed. Access is denied. Rebooting interface, ok! A reboot is required to complete this action.
netsh winsock reset catalog (response: successfully reset the winsock catalog. You must restart the computer in order to complete the reset.
SFC /SCANNOW (scan finishes and shows this response: windows resource protection found corrupt files but was unable to fix some of them. Details are included in the cbs.log windir\logs\cbs\cbs.log

I can't run the programs you suggested as I have no internet access. What now? Please help.
 

A:Help 1075 Error

I will try to run the items above in the other thread in safe mode and paste results. Sorry about that.
 

2 more replies
Answer Match 57.96%

Firstly, apologies if this is in the wrong section - noob in this forum

System: Win 7 Ultimate x64 on an HP Pavilion DV6. My account is the only proper user account on the laptop and is an admin account.

In short, when trying to do a system restore, it come up with an error that the Volume Shadow Copy Service was not working, though that error code is irrelevant for the purposes of this question as I later managed to run system restore in safe mode from an age old restore point...

When checking services.msc (run as admin), VSS was off and was on manual. Changed it to automatic and then when I tried clicking start, the following error came up:

Windows could not start the Volume Shadow Copy service on Local Computer.
Error 5: Access is denied.

I have since tried everything I can possibly think of (including setting it back and forth between manual & auto) to get the service to start, to no avail. Solutions tried so far:

- net start vss in elevated cmd - returns the same error (error 5 access is denied)
- vssvc.exe in elevated cmd - same
- changed permissions to full control for myself, admin group and NETWORK SERVICE (which I had to add) for System32 folder and for vssvc.exe but no change
- changed permissions to full control for myself, admin group and NETWORK SERVICE (which I again had to add) for VSS in regedit (opened as admin) still nothing
- even tried restarting explorer.exe from an elevated cmd and an elevated task manager and did the permissions again - stil... Read more

A:Error 5 (access denied) when starting Volume Shadow Copy service (VSS)

Just writing an update to say I managed to solve the problem by turning off my AV completely before starting the service and it worked (I obviously changed it back to manual once it started)!

Annoyingly, I had actually already tried this before by turning off individual components of my AV at a time (eg firewall), but for some reason had overlooked trying to turn the whole thing off...

Out of interest, does anyone have any idea what in the AV (KIS 2015) would be blocking VSS from starting suddenly (I haven't changed any of its settings from before the issue arose)?

1 more replies
Answer Match 57.96%

Hello All,

I've tried most of today to get rid of a nasty trojan. System-Check!

I'm almost there - or so I thought. Visually my laptop seems to looking okay, except, I can't seem to restart my Firewall within McAfee?

Here's a DDS:
**** EDITED ****

DDS removed - as I managed to solve issue by uninstalling MCafee and reinstlling.
Mods - please remove post or close. thanks

A:McAfee 1075 Error

Mods - please close post or remove.

thank you.

2 more replies
Answer Match 57.96%

When I try to connect my printer lexmark 4200 series I get the message no print spooler available error 1075 Please HELP!!!

A:[SOLVED] Error 1075

I would make sure the print spooler service is enabled.

Go to Start > Run... and type services.msc to open the service snap-in. Then Scroll down to Print Spooler. Right click on it and click Start. Then right click on it, select Properties, and set the startup type to Automatic.

9 more replies
Answer Match 57.96%

I am having the same issues as the other thread that is currently going on regarding a virus that seems to have left me unable to connect to the internet , i have done the hijack this report and will post results . please help!!
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 9:17:51 PM, on 12/20/2011
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Adobe\Adobe Version Cue CS2\ControlPanel\VersionCueCS2Tray.exe
C:\Program Files\LeapFrog\LeapFrog Connect\Monitor.exe
C:\Program Files\Common Files\Java\Java Update\jusched.exe
C:\WINDOWS\system32\spool\drivers\w32x86\3\hpztsb10.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files\Hewlett-Packard\Digital Imaging\bin\hpotdd01.exe
C:\Program Files\NETGEAR\WG111T\wlan111t.exe
C:\WINDOWS\system32\netdde.exe
C:\Program Files\SUPERAntiSpyware\SASCORE.EXE
C:\WINDOWS\system32\CTsvcCDA.EXE
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\LeapFrog\LeapFrog Connect\CommandService.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\Ms... Read more

A:Error 1075 no internet

help
 

1 more replies
Answer Match 57.96%

My windows fire wall wont start Ive tried starting it in services and the action center but no luck, i know their might be a hardware change or virus or malware that has done this but im unable to pin point it the date of any change because Ive only just realized that the firewall was off because i wanted to block a game from accessing the Internet. Ive scanned countless times but it says its clean.  Also windows update wont install updates and system recovery doesn't work...Ive been trying to follow instructions that have been given to other people but with no luck, any help will be appreciated.
 
my PC: 

OptiPlex 760 (Late 2008)

Service Tag: 5M0YJ4J | Express Service Code: 12215778643
32 bit operating system win 7 home premium 
 

 
many thanks

A:!!firewall error 1075!!

Please download and install Speccy to provide us with information about your computer.  When  FileHippo opens, click on Download latest version in the upper right pane. When Speccy opens you will see a screen similar to the one below.  Click on File which is outlined in red in the screen above, and then click on Publish Snapshot. The following screen will appear, click on Yes.  The following screen will appear, click on Copy to Clipboard.  In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.  Please download MiniToolBox, save it to your desktop and run it. Checkmark the following checkbox: List Installed Programs Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post. Try the following.  Click on the Start orb, then type Services in the Search programs and files box. Services will appear above the search box under Programs, right click on Services and choose Run as administrator. When Services opens scroll down to until you find Windows Firewall, double click on it. Click the Startup type box and make sure it is set to Automatic, if it isn't click on Automatic. Look in the Service status to see if it is running, if it isn't click on Start, then click on Apply, then OK. Scroll down to Base Filtering Engine and doulbe click on it.... Read more

11 more replies
Answer Match 57.96%

DHCP and TCP/IP can not be started from Services with out the following error.

Error 1075: The dependency service does not exist or has been marked for deletion.

I've checked the dependencies and all are running.

AFD is the only driver common to both DHCP and TCP/IP so I assumed it is either not running or is corrupt..yet when I try to start AFD from the CMD prompt I get...."service is already running.

I have since disabled my Lan Connection via Network Connections as it just sits there trying to acquire ip without ever timing out.

I also performed a registry scan with Registry Booster in Safe Mode. It reported:

1061 System Errors
205 User Errors, and
1 Third Party Error

A cursory review of the log tells me the majority have to do with poorly uninstalled programs. I did NOT let Registry Booster fix anything.

As per Forum Rules my HiJackThis log and others follow:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 7:57:39 PM, on 11/26/2011
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16791)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\PROGRA~1\AVG\AVG10\avgchsvx.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Pure Networks\Network Magic\nmapp.exe
C:\Program Files\QuickTime\QTTask.exe
C:\Program Files\AVG\A... Read more

A:Error 1075 Can not Acquire Ip

16 more replies
Answer Match 57.54%

"DHCP server unreachable" error message.
Could you please help me?

I have a crossover cable between my laptop and my home PC, with my laptop as the main computer. I have the laptop IP set to 192.168.0.1, and the Home PC to 'Obtain and IP address Automatically'.

This set up actually worked for some time. Sometimes, when I open up the command prompt and type in 'ipconfig', it gives me a 168.xx.xx.xx address, and I just type in 'ipconfig /release' and 'ipconfig /renew' and after a minute of waiting, I used to get a 192.168.0.XX address. After this, I was able to share the Internet Connection between the 2 computers, the files etc.

But of late, I have not been able to get this 192 IP address. After typing in 'ipconfig /release' and 'ipconfig /renew', after a minute of waiting, I get a "DHCP server unreachable" error message.

I have tried restaring the PC etc etc, but I continually get this same message. I can ping 192.168.0.1 from the Home PC if I put in a 192.168.0.2 address on the Home PC, and I can even share files.... but I am NOT able to share the Internet connection!!

Please suggest what needs to be done. Thank you!!

Any help at all is welcome.
 

A:"DHCP server unreachable" error message.

perhaps ur IP has detected this. Could this possibly be not allowed by ur ISP? If so, your ISP probably did something to keep you from doing this. Also, for better results, use a router it works much better and you are usually always garunteed 100% uptime and no problems.
 

3 more replies
Answer Match 57.12%

DHCP client not starting getting error dependencies failed. using win 7 starter 32 bit. ipconfig/all gave me this result

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Saurabh>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Saurabh-HP
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
Physical Address. . . . . . . . . : 70-F3-95-B7-03-30
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
Physical Address. . . . . . . . . : 68-B5-99-62-AE-C0
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 4313 802.11b/g/n
Physical Address. . . . . . . . . : 70-F3-95-B7-03-30
DHCP Enabled. ... Read more

A:DHCP not starting

I would first run ipconfig /release & ipconfig /renew (open command prompt as admin)

To make sure it wasn't just an issue communicating with the dhcp server.

If that doesn't work then make sure the dhcp server is up and running correctly. Its probably part of your router. Which you can access via the router address in a web browser

9 more replies
Answer Match 57.12%

My computer is forever stuck on "Acquiring Network address". I have tried to go into the services, and turn on the DHCP Client, however I get an Error 1075: The dependency service does not exist or has been marked for deletion, and it will not start. Attached is the logs you wished. Hopefully someone can help out. (Note: This is not the affected computer, the logs are from it, however) I am running Windows XP Home Edition, SP3. I thank you in advance for the help.

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 8:29:14 AM, on 12/13/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Symantec Shared\PIF\{B8E1DD85-8582-4c61-B58F-2F227FCA9A08}\PIFSvc.exe
C:\Program Files\McAfee\SiteAdvisor\McSACore.exe
C:\Program Files\Common Files\Motive\McciCMService.exe
C:\Program Files\Common Files\McAfee\McSvcHost\McSvHost.exe
C:\WINDOWS\system32\mfevtps.exe
C:\WINDOWS\system32\HPZipm12.exe
C:\Program Files\Analog Devices\SoundMAX\SMAgent.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Yahoo!\SoftwareUpdate\YahooAUService.exe
C... Read more

A:Cannot connect to internet - Error 1075

Thanks for the quick response guys, You're a lifesaver. I shall be sure to recommend that all my friends come to http://www.bleepingcomputer.com for all their troubles too!
 

1 more replies
Answer Match 57.12%

Need help solving Error #1075 problem in conjunction with CheckPoint VPN NGX R60 HFA3. I am using a Dell E6510 laptop computer running Windows 7 Ultimate 32-bit OS. I can get this VPN to run and connect when I use Microsoft's XP virtual machine sitting on the Windows 7 desktop but I cannot get it to run on the Windows 7 desktop by itself.

Although the VPN seems to load without incident the associated icon "key" does not appear in the notification tray at the lower right. It does appear in the XP virtual machine and on a separate HP desk top running Vista.

When I type services.msc at the Win 7 command prompt I get a list of all the loaded services including the CheckPoint VPN. It is at this point when I try to start the VPN I get the 1075 error. When I check the dependencies under the VPN I find the "CheckPoint Office Mode Module" and the "VPN-1 Module".

How do I determine if these dependencies are causing the 1075 error message? What steps do I need to take to resolve the error message so the VPN will start?

A:CheckPoint VPN Causing Error #1075

make sure your Firewall is allowing the following:
SR_SDS.EXE
SR_GUI.EXE
SR_WATCHDOG.EXE
SR_SERVICE.EXE


If you're running 3rd party software FW, disable or uninstall it.

1 more replies
Answer Match 57.12%

Help me please, I have the same problem, and here is the SystemLook result:

SystemLook 30.07.11 by jpshortstuff
Log created at 09:34 on 18/12/2011 by USER
Administrator - Elevation successful

========== filefind ==========

Searching for "afd.sys"
C:\Windows\System32\drivers\afd.sys --a---- 338944 bytes [12:25 16/12/2011] [12:21 16/12/2011] 9EBBBA55060F786F0FCAA3893BFA2806
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7600.16385_none_d7be98b5bfc0b4c1\afd.sys --a---- 338944 bytes [23:12 13/07/2009] [23:12 13/07/2009] DDC040FDB01EF1712A6B13E52AFB104C
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7600.16802_none_d81220b5bf827af7\afd.sys --a---- 338944 bytes [10:52 17/06/2011] [02:35 25/04/2011] 0DB7A48388D54D154EBEC120461A0FCD
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7600.20951_none_d864ad9ad8c98d1f\afd.sys --a---- 338944 bytes [10:52 17/06/2011] [02:27 25/04/2011] C114AB7A1550D42EA1700FFD4179CF5A
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7601.17514_none_d9efac7dbcaf385b\afd.sys --a---- 338944 bytes [02:30 09/07/2011] [08:40 20/11/2010] 1151FD4FB0216CFED887BFDE29EBD516
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7601.17603_none_d9f97e05bca8003a\afd.sys --a---- 338944 bytes [12:25 16/12/2011] [12:21 16... Read more

A:Cannot connect to internet - Error 1075

Can I see you FSS log again?

http://download.bleepingcomputer.com/farbar/FSS.exe

and run it on the computer with the issue.

* Press "Scan".
* It will create a log (FSS.txt) in the same directory the tool is run.
* Please copy and paste the log to your reply.

1 more replies
Answer Match 57.12%

My computer is forever stuck on "Acquiring Network address". I have tried to go into the services, and turn on the DHCP Client, however I get an Error 1075: The dependency service does not exist or has been marked for deletion, and it will not start. Hopefully someone can help out. (Note: This is not the affected computer, the logs are from it, however) I am running Windows XP Home Edition, SP3. I thank you in advance for the help.

A:Cannot connect to internet - Error 1075

Hi -As long as you can understand the 'reasonably basic' directions, there is a solution here -http://www.google.com.au/url?sa=t&rct=j&q=error%201075&source=web&cd=1&ved=0CDsQFjAA&url=http%3A%2F%2Fkaliphonia.com%2Fcontent%2Fwindows%2Fhow-to-fix-error-1075-the-dependency-service-does-not-exist-or-has-been-marked-for-d&ei=jwvpTrX9K4fBiQfsoqHSCA&usg=AFQjCNGUfPzx_GkR2922eUot0LA67VjvMAThank You -

25 more replies
Answer Match 57.12%

DHCP Client will not start from services menu and neither will TCP/IP all other networking services appear to be started and working.

DHCP dependencies are:

AFD Networking Support Environment
TCP/IP Protocol
IPSEC driver
TCP/IP dependencies are:
AFD

Since the TCP/IP's only dependency is AFD I suspect it has been deleted or corrupted. How do I go about fixing that?

Paste SYSINFO.txt

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 2, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz, x86 Family 15 Model 3 Stepping 4
Processor Count: 1
RAM: 1023 Mb
Graphics Card: NVIDIA Quadro NVS 280 SD, 64 Mb
Hard Drives: C: Total - 38099 MB, Free - 8667 MB; E: Total - 29313 MB, Free - 16148 MB; X: Total - 95393 MB, Free - 69980 MB;
Motherboard: Dell Computer Corp., 0W2563
Antivirus: AVG Anti-Virus Free Edition 2011, Updated: Yes, On-Demand Scanner: Enabled
I already reset the ip stack with the following to no avail.

Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log

Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog

Reboot the machine.

I'd really like to avoid the nuclear option. Any assistance is greatly appreciated.

Thanks
 

A:Solved: Error 1075 Can not Acquire Ip

8 more replies
Answer Match 57.12%

Hey guys, I'm trying to share media on my computer with my xbox 360, for that i need the windows media network sharing service started, but everytime i try to start it i get: Error 1008: An attempt was made to reference a token that does not exist.

I also tried the Zune network sharing service, got the same error??

Please help.

Thank you.
 

A:Solved: Error 1008 starting Windows media player network sharing service??

I realised that Vuze works, so i don't have to put up with either programs, thanks anyway
 

1 more replies
Answer Match 56.7%

I'm messing around with W2K Server at home and can't seem to get it connected through my cable modem to my ISP's DHCP server. I know the cable and connection are good because it works on my W2K Pro workstation. I've tried ipconfig /renew but that's when the error occurs that it can't find DHCP. I can successfully ping the loopback address. The NIC is set to use DHCP.

Since I'm just becoming familiar with Server I'm sure there's something I'm not configuring properly. Suggestions?

Thanks.
Kevin
 

A:W2K Server can't find external to DHCP server

6 more replies
Answer Match 56.7%

Have no internet connection either wired or wireless.
Other computers on network have no issues with connection.
When I go to connection icon in taskbar I see the following:
connection status: Unknown
The dependency sevice or group failed to start
When I check the services I see that the DHCP Client is listed as starting, but it never actually starts.
When I attempt to check the logs in Admin tools they won't open either.
I saw in another thread in this forum that some people have solved this with sfc /scannow but when I try that I get "Windows Resource Protection did not find any integrity violations".
Any other suggestions....???

A:DHCP Client not starting

Hi, n4syth, and welcome to the forums.

Have you performed any service tweaking? It is possible that the DHCP client is not starting because of the fact that a service that *it* needs to have running in order to start is actually not running....

2 more replies
Answer Match 56.7%

My PC is three years old and has been a great machine. I run Windows XP Home Edition, I.E. 7 and have all the protection installed I can find.

Quite by accident I discovered my System Restore is not working. I don't need it at the moment (!!!) but I like everything to be as near as perfect as possible on my PC so I have been trying to discover what the SR problem is and how I can resolve it.

I keep getting the message "S R is not able to protect your computer. Please restart and run SR again"............This advice does not work. for me!
I cannot turn off SR for the same reason.

I then checked out this section of the forum and discovered that many people have had this same problem. I have tried downloading Kelly's file 238 (I think that was the number) ; I have tried accessing services.msc ; I have tried accessing i386: nothing!

I did get the message "Error 1075: "Dependency service does not exist or has been marked for deletion". This error seeems to apply to many facilities on a PC.

I have my windows XP disk but cannot lay my hands on the SP2 one so I don't want to mess about without your professional advice to do so!! (apologies!)

As I said, if you solve my problem you will be miracle workers and worthy of your wings.

My thanks for any help you can offer me.

A:System Restore Won't Work : Error 1075

Right click My Computer > Manage > Expand Event Viewer > Look under Application and/or System to see if there is any event reporting on about System Restore.

Please do let us know if there is, a screenshot would be a great help.

Another workaround would be searching for sr.inf, right click it and select "Install". You might need Window XP install disc.

61 more replies
Answer Match 56.28%

Hi All,
 
Anyone could u please help me for this problem.
 
I just change my office internet modem. And after i change to the IP and DNS to obtain automatically, 1 of my computer was having problem connect to the server, we are using a "TP-Link Switch".  The computer is connected to the switch and able to connect to internet but failed to share files and folders.
 
When I tried to start the "server" services in services.msc, it show this error message.>>Could not start the Server service on local Computer. Error 126: The specified module cannot be found<<
I  tried this method but also failed to fix it.
Error message when starting the Server service in Windows XPhttp://www.winhelponline.com/articles/64/1/
 
Okay for this command,
expand CD drive:\i386\srv.sy_ %systemroot%\system32\drivers\srv.sys  
 
I stuck at "expand E:\i386\srvsvc.dl_ C:\Windows\system32\srvsvc.dll" 
 
 
 

A:Unable to Start "Server" Service - ERROR 126

Do you have a Windows Xp disk?

1 more replies
Answer Match 55.86%

Hey Everyone.

Maybe someone could be of help. I have gone through several different forums and have attempted several ways to try to fix this but have had no luck.

I have tried the netsch winsock reset
I have tried the ipconfig /renew
My DNS service starts but my dchp client doesnt want to and gives me the error 1075.
I have removed NAV still nothing.

I have also tried many other alternatives but im just not remembering at the moment and I am just stumped.

Internet works on my other two computers, but my laptop is what seems to not want to connect wirelessly or routed. Something seems to be blocked or missing.

If anyone can please help me in any way possible it would greatly be appreciated. If you need me to provide some more details please let me know.

Thanks
Lewis B.
 

A:Error 1075/No Internet after Norton Anti Virus

16 more replies
Answer Match 55.86%

This is my sister's netbook. The problems started with one of those new "fake antivirus" that puts up a ton of obviously fake results that claim your computer is highly infected*. She being... less technologically inclined apparently decided to run the "Antivirus scan" over and over again over night and then the next day gave it to me to try to figure out what was wrong. I can't find the links right now but I found a bunch of blogs that mentioned (Privacyprotection.exe) and among the most frustrating aspects what that it blocked pretty much everything from running. I did a bit of digging and eventually found out it was a rootkit causing the issues and the tools they gave me wouldn't run but I was able to follow the manual instructions. (remove the .exe, remove the alias, regedit and remove the key that matched privacyprotection.exe but not the other ones like the one underchrome etc).That took care of the major problem and I was able to get Microsoft Security Essentials running but everyscan kept turning up a few "Trojans" and that upon trying to clean would result in an error. The error would lead to 'restart to finish removel'. I tried safe mode and the same result. One top of that google results kept getting redirected (forget the site right now.. something like awesomesearch.com or what have you). I decided to try from another angle the redirect angle and found thishttp://www.bleepingcomputer.com/forums/topic422038.htmlI t... Read more

More replies
Answer Match 55.86%

I've been reading many threads about this issue, and I'm thinking I may need to do some scary registry edits.

I'm unable to connect to the internet. I recently turned of UAC. During a recent start-up, the scan disk ran, and 'fixed' a lot of corrupt and damaged files. After that, unable to connect to the net. I turned UAC back on, but still unable to connect.

I'm running Windows Vista Home Premium, so I don't secpol.msc, so I have to do the registry edits manually I suppose.

I'm at work so I don't have access to my home computer right yet, but I wanted to get this post up here now so people have a chance to read it over. If there is additional information you need, let me know.

Thanks.

More replies
Answer Match 55.86%

After upgradeing HP Web Jetadmin to the latest version of 10.4 using a remote SQL server I am getting the following error message:  This section doens't seem to exist in the install guide as stated. How can I fix this? Reese

More replies
Answer Match 55.44%

This is really bad.. I cant copy and paste to backup files for reformat and this sony laptop is telling me that the recovery will delete all files, so no option to do a windows repair. I might need to buy a 2.5 to 3.5 adaptor for this mess im in, if you cant help.. I did many things so far nothing worked..

I had a virus that would not allow me to get any icons, this was fixed after i ran avg in safe mode.

When i got back into the machine I received many pop ups one after another, ad-aware was run and after I cannot start any services, I have everything set to start in msconfig i have admin I cant change users, i cant do windows search, cant see any networks in network places nothing i cant even copy and paste the paste option is Grey when i try to copy then paste...

Every service I try to start i get error 1075 dependency service does not exist for all services.

also the Extended services tab give me nothing not list of any services only the standard tab.. I can click start and i get the error.

also Ad-aware gives me an error too when it tries to start system error 1810 has occurred service is not online.

Maybe i need to do a system restore i hope i don't lose all the pictures etc.. I cant copy and paste and its a laptop so i would need an adapter to put it on a desktop.. i think i will be OK with a system restore.
 

More replies
Answer Match 55.44%

I had a virus that would not allow me to get any icons, this was fixed after i ran avg in safe mode.

When i got back into the machine I received many pop ups one after another, ad-aware was run and after I cannot start any services, I have everything set to start in msconfig i have admin I cant change users, i cant do windows search, cant see any networks in network places nothing i cant even copy and paste the paste option is Grey when i try to copy then paste...

Every service I try to start i get error 1075 dependency service does not exist for all services.

also the Extended services tab give me nothing not list of any services only the standard tab.. I can click start and i get the error.

also Ad-aware gives me an error too when it tries to start system error 1810 has occurred service is not online.

Maybe i need to do a system restore i hope i don't lose all the pictures etc.. I cant copy and paste and its a laptop so i would need an adapter to put it on a desktop.. i think i will be OK with a system restore.

More replies
Answer Match 55.44%

For the past few days, I've been trying to get internet activity on my PC but I just can't. I've upgraded from XP SP2 to XP SP3 for the obvious to get more critical updates, security and better service but ever since the upgrade I can't. Whenever I've gone back in time with system restore is the only time I've been able to get on the net but that is no longer a solution now thanks to me moving the restore up and not being able to go further back.

Long story short, the 2 computer icons on the lower right hand of my screen says limited or no connectivity. I've researched this problem and I found something interesting. I went into command prompt and typed in 'services.msc' and it brought me to a window named Services(Local). The directions told me to check on DHCP Client and to make sure that it said Automatic under Startup Type and that the Status was Started. Well when I went there the Status was blank even though my Startup Type was on Automatic. I then right clicked the spot and tried to Start which was the only action option available and I got this message: Could not start the DHCP Client service on Local Computer. Error 1068: The dependency service or group failed to start. I then went down the list to TCP/IP Netbios Helper Properties and got the same message as above except it said TCP/IP NetBIOS Helper service in place of DHCP Client service.

So then, I went into computer-manage-device manager to see if I could start the se... Read more

A:Limited or No Connectivity? Could DHCP Client Not Starting Be The Cause?

16 more replies
Answer Match 55.44%

Hi.
I used to be able to connect to the internet before with no problems. 2 wks ago, the Wireless connection started showing "LIMITED CONNECTIVITY", though, it can see all the wifi networks available in the area. Other computers and wifi enabled devices can all connect easily to the same network. I've tried the following solutions(from the forums) already:
-re-installing drivers, disabling-enabling network adapters
-made sure the passwords are correct
-disabling firewalls
-turning on-off (5mins) the router +PC
-removing and reloading the network
-scanned software/hardware for problems thru built in "vaio care"
(indicated that everything is running normally)

I also tried to run the Network Diagnostics but this error msg always appear= "The Diagnostics Policy Service is not running."- even if i run it as an administrator..

Checked the Local Services and found out that DHCP Client is not running- Tried starting it several times but it won't start and this error msg always appear "Windows could not start the DHCP CLient service on local Comp. Error 5: Access is denied."

I'd appreciate any help/assistance/idea from anyone. Been trying to sort this one out for 4 days now, and still found no solution. Thanks for taking time in reading this.

PC details: SonyVaio E-series, Intel i5, Windows 7 HomePremium (64-bit)

A:Limited connectivity, DHCP Client not starting

Welcome to SF,

Have tried a System Restore? Restore it to a point where you were able to wireless connect.
System Restore

Verify that all your Network Services are Started from Control Panel and its Dependencies.
Click on start and type services.msc press enter.
? COM+ Event System (for WZC issues)
? Computer Browser
? DHCP Client
? DNS Client
? Network Connections
? Network Location Awareness
? Remote Procedure Call (RPC)
? Server
? TCP/IP Netbios helper
? WLAN AutoConfig
? Workstation

9 more replies
Answer Match 55.02%

Hello, I am having issues with my clients. Every time they logon, the information won't go through the PC client and load up. I get this problem in the image below.

A:Windows Server 2012: User Profile Service Error

Hi Benjamin,

I do not have the ability to remote in to my Windows Server 2012 box atm but have you tried this tutorial:

http://www.eightforums.com/tutorials/38817-you-ve-been-signed-temporary-profile-fix.html

Hope that helps!

Cheers,
Harry

2 more replies
Answer Match 55.02%

Issues with installation of a recently released update from Microsoft
Security Update for SQL Server 2005 Service Pack 3 (KB970892) error code 6D9E fails to finish and install.... have went to microsoft and attempted to download the files, however installation fails during this process as well.... any suggestions?

Current OS Windows 7 Ultimate Build 7600

Thanks,

thewindowsguy89

A:Error Update SQL Server 2005 Service Pack 3 (KB970892)

This update also failed to install on my XP Pro SP3 machine at work. Google searches reveal that at least a few others are having this problem on both XP and Vista, but there are no solutions posted anywhere that I can find yet.

My Win 7 machines at home weren't offered this update when I ran Windows Update yesterday or today so I don't have anything to offer on that front.

3 more replies
Answer Match 55.02%

Hi everybody !!!!
I'm following a tutorial online about caching with appfabric I run certain code in visual studio 2010. and as soon as i execute the code, it sends error 26 SQL, after checking many things including the log i found:

The AppFabric Workflow Management Service service hung on starting
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7022</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2011-09-02T21:57:11.688961300Z" />
<EventRecordID>144261</EventRecordID>
<Correlation />
<Execution ProcessID="612" ThreadID="616" />
<Channel>System</Channel>
<Computer>Bethy-PC</Computer>
<Security />
</System>
- <EventData>
<Data Name="param1">AppFabric Workflow Management Service</Data>
</EventData>
</Event>

I really need help, I've been stock for days

Thanks a lot
Bethy

More replies
Answer Match 54.6%

I was trying to use tftp32d to pxe boot machines however, I couldn't get the DHCP server that is built into that program to work and eventually got angry and gave up. When I had some more patience, I started trying it again and it worked immediately without any settings changed.

The reason for my post is because it stopped working again. I can't figure it out and it's driving me nuts. Could this be an issue with the setting where you can select which network your own for example work, home or public location?

More replies
Answer Match 54.6%

My parents computer has malware, spyware, or a virus. I removed as much as I could but there is still a presence on the computer. At first I was unable to connect to the internet because the DHCP was disabled. If fixed that (by entering the IP address manually) but it still won't connect automatically. I would like to just recover the computer but my parents do not have the recovery disks and Gateway apparently does not stock them for a computer this old. Here are the current issues:1) DHCP will not start at startup. I can manually turn it on, but even set to automatic it won't start.2) I am unable to acess microsoft update and other sites. Some sites I am able to acess, but certain ones I am redirected to ad sites.3) Dial-a-fix said I could be having issues with the following dll files:iesetup.dllimgutil.dllinseng.dllmshtml.dllmsrating.dlloccache.dllpngfilt.dllwebcheck.dll4) I am unable to post on this site from the infected computer as well. Thanks for your help. Here is the HijackThis results:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 8:18:55 PM, on 6/5/2010Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v8.00 (8.00.6001.18702)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC: ... Read more

A:Unable to connect to Microsoft Update, DHCP not starting

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Answer Match 54.18%

Hi.

Recently we bought two Compaq computers running Windows XP Home; we have cable internet and after the computer is left alone for a few hours, the internet just dies.

I have also found that if I restart the DHCP Client Service, then the internet boots up immediately. Is there a resaon for the DHCP timeout in Win XP Home?

Thanks a lot.
 

A:DHCP Client Service

every time that the internet dies, do you get a new IP address? if you do, it might be on the ISP side that is doing it..

also, if your running power managment, it might be set to turn off the NIC. goto the properties of your NIC in the Device manager, and check The Power Managment tab.. and you can check out the Power Options in the Control Panel..

hope this helps
 

2 more replies