Tech Problem Aggregator

Solved: Error 1075 Can not Acquire Ip

Q: Solved: Error 1075 Can not Acquire Ip

DHCP Client will not start from services menu and neither will TCP/IP all other networking services appear to be started and working.

DHCP dependencies are:

AFD Networking Support Environment
TCP/IP Protocol
IPSEC driver
TCP/IP dependencies are:
AFD

Since the TCP/IP's only dependency is AFD I suspect it has been deleted or corrupted. How do I go about fixing that?

Paste SYSINFO.txt

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 2, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz, x86 Family 15 Model 3 Stepping 4
Processor Count: 1
RAM: 1023 Mb
Graphics Card: NVIDIA Quadro NVS 280 SD, 64 Mb
Hard Drives: C: Total - 38099 MB, Free - 8667 MB; E: Total - 29313 MB, Free - 16148 MB; X: Total - 95393 MB, Free - 69980 MB;
Motherboard: Dell Computer Corp., 0W2563
Antivirus: AVG Anti-Virus Free Edition 2011, Updated: Yes, On-Demand Scanner: Enabled
I already reset the ip stack with the following to no avail.

Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log

Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog

Reboot the machine.

I'd really like to avoid the nuclear option. Any assistance is greatly appreciated.

Thanks

A: Solved: Error 1075 Can not Acquire Ip

8 more replies
Answer Match 98.7%

DHCP and TCP/IP can not be started from Services with out the following error.

Error 1075: The dependency service does not exist or has been marked for deletion.

I've checked the dependencies and all are running.

AFD is the only driver common to both DHCP and TCP/IP so I assumed it is either not running or is corrupt..yet when I try to start AFD from the CMD prompt I get...."service is already running.

I have since disabled my Lan Connection via Network Connections as it just sits there trying to acquire ip without ever timing out.

I also performed a registry scan with Registry Booster in Safe Mode. It reported:

1061 System Errors
205 User Errors, and
1 Third Party Error

A cursory review of the log tells me the majority have to do with poorly uninstalled programs. I did NOT let Registry Booster fix anything.

As per Forum Rules my HiJackThis log and others follow:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 7:57:39 PM, on 11/26/2011
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16791)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\PROGRA~1\AVG\AVG10\avgchsvx.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Pure Networks\Network Magic\nmapp.exe
C:\Program Files\QuickTime\QTTask.exe
C:\Program Files\AVG\A... Read more

A:Error 1075 Can not Acquire Ip

16 more replies
Answer Match 68.46%

When I try to connect my printer lexmark 4200 series I get the message no print spooler available error 1075 Please HELP!!!

A:[SOLVED] Error 1075

I would make sure the print spooler service is enabled.

Go to Start > Run... and type services.msc to open the service snap-in. Then Scroll down to Print Spooler. Right click on it and click Start. Then right click on it, select Properties, and set the startup type to Automatic.

9 more replies
Answer Match 68.04%

Greetings,
I am having a major DHCP error on my girlfriend's laptop. I am primarily a Linux user so I'm kinda lost here as her machine is running XP. It's a Dell XPS M1210 which, conveniently, did not come with a recovery CD or even partition.
Anyway, a few weeks ago her wireless network device stopped working. It would look like it was connecting, but it would hang on "Acquiring network address." At first I thought maybe the device was shot, until I had the chance to test out the wired ethernet, which has the same problem.
After quite a bit of googling, I ran services.msc, and saw that DHCP is not running. When I try to start it from that menu, however, I get this message: "Could not start the DHCP Client service on Local computer. Error 1075: The dependency service does not exist or has been marked for deletion."
After more googling, I discovered that DHCP has only 3 dependencies: TCP/IP, AFD, and NetBt. I checked the registry, and those were the only ones listed.
After even more googling, I ran devmgmt.msc and selected "show hidden devices" and double clicked on "non plug and play devices." I TCP/IP and AFD are both there. NetBt, however, is not.
I've spent hours doing further googling and tried pretty much every fix I could find and nothing seems to work. If the PC had shipped with a recovery CD I imagine this would be easy to fix but alas no luck. I need to get this working so I can set up my new internets and I... Read more

A:Solved: DHCP Error 1075

15 more replies
Answer Match 65.1%

Not sure why this problem is persisting. I appear to have all the dependent files. I have run SFC/ scannow to no avail. I cannot start the services in question. The 1075 error message continues. I have attached my system info.
 

A:Solved: DHCP client and TCPIP Netbios helper 1075 error

I was able to restart DHCP services by deleting the registry entry and rebooting. I went into the registry editor, located the DHCP subkey, right click on dependonservice and clicked on delete.
However TCPIP Netbios helper I could still not start, even after running sfc/scannow.
The solution for me was to restore the operating system to an earlier point in time. In windows xp, go to programs> accessories>disk utilities> system restore and follow the directions. I suppose I could have done that for both problems? At least I didn’t have to reinstall XP!

Anyway I can connect to internet now
 

1 more replies
Answer Match 58.38%

My computer is stuck on "Acquiring Network address". I have tried to go into the services, and turn on the DHCP Client, however I get an Error 1075: The dependency service does not exist or has been marked for deletion, and it will not start. I am running Windows XP Home Edition, SP3. I thank you in advance for the help.

A:Error 1075

Hi -See if this reset works first. Please read carefully -TCP/IP NetBIOS Helper error 1075 TCP/IP stack repair options for use with Windows XP with SP2/SP3.Start, Run, Type CMD to open a command prompt:In the command prompt window that opens, type the following commands, each followed by the Enter key:Note: Type only the text in bold for the following commands.Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalogReboot the machine. Thank You - EDITED to reset commands -

12 more replies
Answer Match 58.38%

I recently had to reinstal Windows XP Media Center SP3 operating system on my Dell Inspiron 9300 laptop. When trying to install Pure Networks Net Magc Pro it will not run as it says the platform service is no running. When I try to start the platform service I get the following Error 1075: The dependency service does not exist or has been marked for deletion.
Does anyone know how to correct this situation.

Thanks.

A:ERROR 1075

Why not post to the NetMagic forum. You will have more luck there then in this
General Microsoft Forum

2 more replies
Answer Match 58.38%

Avg found two trojans. It didn't seem like it removed them. Internet was working though. Ran malwarebytes it found nothing. Internet was still working. Started Having connectivity issues. My dhcp client service won't start. I got a 1075 error. my internet via wifi or wired won't work. I ran the following command prompts:
net start AFD (response: the requested has already been started)
netsh int ip reset reset.log (response: resetting echo request, failed. Access is denied. Rebooting interface, ok! A reboot is required to complete this action.
netsh winsock reset catalog (response: successfully reset the winsock catalog. You must restart the computer in order to complete the reset.
SFC /SCANNOW (scan finishes and shows this response: windows resource protection found corrupt files but was unable to fix some of them. Details are included in the cbs.log windir\logs\cbs\cbs.log

I can't run the programs you suggested as I have no internet access. What now? Please help.
 

A:Help 1075 Error

I will try to run the items above in the other thread in safe mode and paste results. Sorry about that.
 

2 more replies
Answer Match 58.38%

My internet will not connect It Keeps saying Acquiring network address, I have tried everything even going into Services.msc to Start DHCP client and it gives me this error
Error 1075, The dependency service does not exist or has been marked for deletion

I am running Windows XP Home Edition SP3 and its Dell

A:Error 1075

First , you may have done this but ..... check if you can start the dependency service for DHCP client service.To view the dependency services registered for DHCP Client Service, try the following steps? Click on Start and them type cmd and press Enter? In the command prompt type: CMD /K SC QC DHCP - Please note the spaces -? Press Enter check if the dependency service is started.Verify that the Dependency Service / components are runningNext -To verify that the three dependency components are running. Follow the steps below:? Click Start, Run and type DEVMGMT.MSC - No spaces -? In the View menu, click Show hidden devices? Double-click Non-Plug and Play drivers section? Double-click the entry AFD, and click the Driver tab? Set the Startup type to System.? Start the service. Note down the error message if any.? Similarly start the two other drivers namely:? TCP/IP Protocol Driver? NetBios over Tcpip? Close Device Manager and restart Windows.? Now check if you can start the DHCP service.Let us know if you have done all this, and we can look for more ideas -

4 more replies
Answer Match 57.96%

Hello,

I'm recently recovering from a mild virus infection on my computer, and noticed that after I had run Avast! and Malwarebytes to remove the virus, my computer lost its internet functionality. Upon running ipconfig in command prompt, I noticed that the computer was not being assigned an IP address, which lead me to believe there could be an issue with DHCP.

When running services.msc, I notice that both DHCP client and TCP/IP netbios are not running, and when I try to run them, I get an error 1075, that the files are "either non-existent or marked for deletion". I noticed that someone else had posted a very similar problem, but a few of the fixes were not available for viewing/download as they were specifically tailored for that issue.

I'm currently running Windows XP Media Center, Service Pack 3 on a Dell Inspiron E1505 laptop I had purchased in mid-2006.
 

A:DHCP and TCP/IP Error 1075

Below is a copy of the Hijack This log.

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 9:03:31 PM, on 12/26/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Alwil Software\Avast5\AvastSvc.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\ehome\ehtray.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\ATI Technologies\ATI.ACE\cli.exe
C:\Program Files\SigmaTel\C-Major Audio\WDM\stsystra.exe
C:\Program Files\Microsoft Office\Office12\GrooveMonitor.exe
C:\Program Files\VERIZONDM\bin\sprtcmd.exe
C:\Program Files\Adobe\Reader 9.0\Reader\Reader_sl.exe
C:\Program Files\Alwil Software\Avast5\avastUI.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\LogMeIn Hamachi\hamachi-2.exe
C:\Program Files\Java\jre6\bin\jqs.exe
c:\PROGRA~1\mcafee\SITEAD~1\mcsacore.exe
C:\Program Files\VERIZONDM\bin\sprtsvc.exe
C:\Program Files\VERIZONDM\bin\tgsrvc.exe
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\system32\SearchIndexer.exe
C:\WINDOWS\system32\wuauclt.exe
C:\Documents and Settings\Shivang\Desktop\HijackThis.exe
C:\WI... Read more

2 more replies
Answer Match 57.96%

Hello All,

I've tried most of today to get rid of a nasty trojan. System-Check!

I'm almost there - or so I thought. Visually my laptop seems to looking okay, except, I can't seem to restart my Firewall within McAfee?

Here's a DDS:
**** EDITED ****

DDS removed - as I managed to solve issue by uninstalling MCafee and reinstlling.
Mods - please remove post or close. thanks

A:McAfee 1075 Error

Mods - please close post or remove.

thank you.

2 more replies
Answer Match 57.96%

My windows fire wall wont start Ive tried starting it in services and the action center but no luck, i know their might be a hardware change or virus or malware that has done this but im unable to pin point it the date of any change because Ive only just realized that the firewall was off because i wanted to block a game from accessing the Internet. Ive scanned countless times but it says its clean.  Also windows update wont install updates and system recovery doesn't work...Ive been trying to follow instructions that have been given to other people but with no luck, any help will be appreciated.
 
my PC: 

OptiPlex 760 (Late 2008)

Service Tag: 5M0YJ4J | Express Service Code: 12215778643
32 bit operating system win 7 home premium 
 

 
many thanks

A:!!firewall error 1075!!

Please download and install Speccy to provide us with information about your computer.  When  FileHippo opens, click on Download latest version in the upper right pane. When Speccy opens you will see a screen similar to the one below.  Click on File which is outlined in red in the screen above, and then click on Publish Snapshot. The following screen will appear, click on Yes.  The following screen will appear, click on Copy to Clipboard.  In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.  Please download MiniToolBox, save it to your desktop and run it. Checkmark the following checkbox: List Installed Programs Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post. Try the following.  Click on the Start orb, then type Services in the Search programs and files box. Services will appear above the search box under Programs, right click on Services and choose Run as administrator. When Services opens scroll down to until you find Windows Firewall, double click on it. Click the Startup type box and make sure it is set to Automatic, if it isn't click on Automatic. Look in the Service status to see if it is running, if it isn't click on Start, then click on Apply, then OK. Scroll down to Base Filtering Engine and doulbe click on it.... Read more

11 more replies
Answer Match 57.96%

I am having the same issues as the other thread that is currently going on regarding a virus that seems to have left me unable to connect to the internet , i have done the hijack this report and will post results . please help!!
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 9:17:51 PM, on 12/20/2011
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Adobe\Adobe Version Cue CS2\ControlPanel\VersionCueCS2Tray.exe
C:\Program Files\LeapFrog\LeapFrog Connect\Monitor.exe
C:\Program Files\Common Files\Java\Java Update\jusched.exe
C:\WINDOWS\system32\spool\drivers\w32x86\3\hpztsb10.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files\Hewlett-Packard\Digital Imaging\bin\hpotdd01.exe
C:\Program Files\NETGEAR\WG111T\wlan111t.exe
C:\WINDOWS\system32\netdde.exe
C:\Program Files\SUPERAntiSpyware\SASCORE.EXE
C:\WINDOWS\system32\CTsvcCDA.EXE
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\LeapFrog\LeapFrog Connect\CommandService.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\Ms... Read more

A:Error 1075 no internet

help
 

1 more replies
Answer Match 57.96%

DHCP error 1075--can not start the DHCP client on local computer.Dependency service does not exist or has been marked for deletion..

Hi thanks for any help you can give.
Machine is a Dell dimension e520
Win XP Media center edition SP 2

I have the original dell discs and access to a working laptop also running win XP [this one]

During a routine virus scan by avira anti vir it quarentined c:\windowes\system32\drivers\netby.sys.

This disabled the DHCP client so no IP traffic
I restored the file but still no luck

After trying to renew the IP and some searching around I found that the HKEY local machine system currentcontrolset services NETbt registry key is missing

In services DHCP cannot be restarted --gives the warning above.
AFD and TCP/IP are in device manager -non plug & play show hidden devices NETbt is not

Can the registry be repaired from the original discs without having to reinstall everything else?
Or is it as easy as inserting the missing registry key?

Thanks Bob

A:DHCP error 1075

Hi see if this can help How to fix: Error 1075, The dependency service does not exist or has been marked for deletion | Kaliphonia.com

1 more replies
Answer Match 57.96%

The full message is error 1075: The dependancy service either does not exist or has been marked for deletion

This started with a tidserv!inf infection. Norton End-Point seems to have deleted all related virus infections, however, I am now unable to start the DHCP service. I have to set a static IP in order to connect to the internet.

I believe tdx.dll was identified as a virus and deleted. it was listed as a dependancy of dhcp but had no descriptor. Currently it is not listed as a dependancy.

I cannot view network shares from this PC nor can I view shares that I host here on other PC's. Only this computer shows up in net places.

I did an sfc /scannow and it told me audiodev.dll and mofd.dll were corrupted and the files in the store have been corrupted.

I had to take ownership with the admin group in order to replace them with extracted copies from my windows cd, but I when I went back to reassign trustedinstaller as the owner it was not listed as an option.

my cd is without service pack and my installed service pack is sp2.

can anyone be of assistance.

A:DHCP error 1075

My dhcp was working for a day but its back down again. i dont know how to recreate the dependancy on tdx

2 more replies
Answer Match 57.96%

Hello all,

I've noticed that a few people have posted concerning this topic, so I've tried to read up on as many possible solutions before posting. I'm recently recovering from a mild virus infection on my computer, and noticed that after I had run Avast! and Malwarebytes to remove the virus, my computer lost its internet functionality. Upon running ipconfig in command prompt, I noticed that the computer was not being assigned an IP address, which lead me to believe there could be an issue with DHCP.

When running services.msc, I notice that both DHCP client and TCP/IP netbios are not running, and when I try to run them, I get an error 1075, that the files are "either non-existent or marked for deletion". I noticed that someone else had posted a very similar problem, but a few of the more advanced fixes seemed specifically tailored for their issue.

Below are the fixes I've attempted thus far -

1. Checked the registry for DHCP?s dependencies (3 are listed, Afd, Tcpip, and NetBT).
2. Reset TCP/IP stack to installation defaults by typing ?netsh int ip reset reset.log? into command prompt.
3. Reset WINSOCK entries to installation defaults by typing ?netsh winsock reset catalog? into command prompt.
4. Ran ?sfc /scannow? with an XP SP3 CD.

I'm currently running Windows XP Media Center, Service Pack 3 on a Dell Inspiron E1505 laptop I had purchased in mid-2006.

A:DHCP and TCP/IP Error 1075

Welcome aboard Please download Farbar Service Scanner and run it on the computer with the issue.Make sure the following options are checked:Internet ServicesWindows FirewallSystem RestoreSecurity CenterWindows UpdatePress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.

7 more replies
Answer Match 57.12%

My computer is forever stuck on "Acquiring Network address". I have tried to go into the services, and turn on the DHCP Client, however I get an Error 1075: The dependency service does not exist or has been marked for deletion, and it will not start. Hopefully someone can help out. (Note: This is not the affected computer, the logs are from it, however) I am running Windows XP Home Edition, SP3. I thank you in advance for the help.

A:Cannot connect to internet - Error 1075

Hi -As long as you can understand the 'reasonably basic' directions, there is a solution here -http://www.google.com.au/url?sa=t&rct=j&q=error%201075&source=web&cd=1&ved=0CDsQFjAA&url=http%3A%2F%2Fkaliphonia.com%2Fcontent%2Fwindows%2Fhow-to-fix-error-1075-the-dependency-service-does-not-exist-or-has-been-marked-for-d&ei=jwvpTrX9K4fBiQfsoqHSCA&usg=AFQjCNGUfPzx_GkR2922eUot0LA67VjvMAThank You -

25 more replies
Answer Match 57.12%

Help me please, I have the same problem, and here is the SystemLook result:

SystemLook 30.07.11 by jpshortstuff
Log created at 09:34 on 18/12/2011 by USER
Administrator - Elevation successful

========== filefind ==========

Searching for "afd.sys"
C:\Windows\System32\drivers\afd.sys --a---- 338944 bytes [12:25 16/12/2011] [12:21 16/12/2011] 9EBBBA55060F786F0FCAA3893BFA2806
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7600.16385_none_d7be98b5bfc0b4c1\afd.sys --a---- 338944 bytes [23:12 13/07/2009] [23:12 13/07/2009] DDC040FDB01EF1712A6B13E52AFB104C
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7600.16802_none_d81220b5bf827af7\afd.sys --a---- 338944 bytes [10:52 17/06/2011] [02:35 25/04/2011] 0DB7A48388D54D154EBEC120461A0FCD
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7600.20951_none_d864ad9ad8c98d1f\afd.sys --a---- 338944 bytes [10:52 17/06/2011] [02:27 25/04/2011] C114AB7A1550D42EA1700FFD4179CF5A
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7601.17514_none_d9efac7dbcaf385b\afd.sys --a---- 338944 bytes [02:30 09/07/2011] [08:40 20/11/2010] 1151FD4FB0216CFED887BFDE29EBD516
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7601.17603_none_d9f97e05bca8003a\afd.sys --a---- 338944 bytes [12:25 16/12/2011] [12:21 16... Read more

A:Cannot connect to internet - Error 1075

Can I see you FSS log again?

http://download.bleepingcomputer.com/farbar/FSS.exe

and run it on the computer with the issue.

* Press "Scan".
* It will create a log (FSS.txt) in the same directory the tool is run.
* Please copy and paste the log to your reply.

1 more replies
Answer Match 57.12%

My computer is forever stuck on "Acquiring Network address". I have tried to go into the services, and turn on the DHCP Client, however I get an Error 1075: The dependency service does not exist or has been marked for deletion, and it will not start. Attached is the logs you wished. Hopefully someone can help out. (Note: This is not the affected computer, the logs are from it, however) I am running Windows XP Home Edition, SP3. I thank you in advance for the help.

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 8:29:14 AM, on 12/13/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Symantec Shared\PIF\{B8E1DD85-8582-4c61-B58F-2F227FCA9A08}\PIFSvc.exe
C:\Program Files\McAfee\SiteAdvisor\McSACore.exe
C:\Program Files\Common Files\Motive\McciCMService.exe
C:\Program Files\Common Files\McAfee\McSvcHost\McSvHost.exe
C:\WINDOWS\system32\mfevtps.exe
C:\WINDOWS\system32\HPZipm12.exe
C:\Program Files\Analog Devices\SoundMAX\SMAgent.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Yahoo!\SoftwareUpdate\YahooAUService.exe
C... Read more

A:Cannot connect to internet - Error 1075

Thanks for the quick response guys, You're a lifesaver. I shall be sure to recommend that all my friends come to http://www.bleepingcomputer.com for all their troubles too!
 

1 more replies
Answer Match 57.12%

When I try to start the DNS server service on a windows 2000 server it won't start and gives me an error 1075 and says "The dependency service does not exist or has been marked for deletion. Any suggestions, help or advice would be gratefully appreciated.
 

A:Server DNS Issue - Error 1075

Take a look at this see if it helps:

http://support.microsoft.com/kb/839089
 

1 more replies
Answer Match 57.12%

I have read through the original thread (now closed) and tried all it's suggestions. However, I am still having the same IP (on lack of) issues. I ended my efforts with the running of SFC /SCANNOW which took a considerable amount of time, but resulted in no errors of any kind.

I continue to get the Error 1075: the dependency service does not exist or has been marked for deletion, message when trying to start the DHCP Client.

I'm afraid searching the suggested logs for the dependency items it a little over my head.

A little background for my situation. The computer in question is my teenage daughters. A week ago she started having problems with the internet and I'm assuming this is some sort of virus. Whenever selecting a website to launch to, something intervenes and chooses some alternate website. Never the same one twice. I loaded AVAST free version and did a scan. I also updated Malware Bytes and did another scan. I then loaded Kaspersky TDDS killer and did a scan with that. After all that, and roughly 15 files quarantined and deleted, I now have this IP problem. I cannot restore the computer back to an earlier time.

Help would be greatly appreciated!
 

A:DHCP Error 1075 Cont.

16 more replies
Answer Match 57.12%

Need help solving Error #1075 problem in conjunction with CheckPoint VPN NGX R60 HFA3. I am using a Dell E6510 laptop computer running Windows 7 Ultimate 32-bit OS. I can get this VPN to run and connect when I use Microsoft's XP virtual machine sitting on the Windows 7 desktop but I cannot get it to run on the Windows 7 desktop by itself.

Although the VPN seems to load without incident the associated icon "key" does not appear in the notification tray at the lower right. It does appear in the XP virtual machine and on a separate HP desk top running Vista.

When I type services.msc at the Win 7 command prompt I get a list of all the loaded services including the CheckPoint VPN. It is at this point when I try to start the VPN I get the 1075 error. When I check the dependencies under the VPN I find the "CheckPoint Office Mode Module" and the "VPN-1 Module".

How do I determine if these dependencies are causing the 1075 error message? What steps do I need to take to resolve the error message so the VPN will start?

A:CheckPoint VPN Causing Error #1075

make sure your Firewall is allowing the following:
SR_SDS.EXE
SR_GUI.EXE
SR_WATCHDOG.EXE
SR_SERVICE.EXE


If you're running 3rd party software FW, disable or uninstall it.

1 more replies
Answer Match 56.7%

My PC is three years old and has been a great machine. I run Windows XP Home Edition, I.E. 7 and have all the protection installed I can find.

Quite by accident I discovered my System Restore is not working. I don't need it at the moment (!!!) but I like everything to be as near as perfect as possible on my PC so I have been trying to discover what the SR problem is and how I can resolve it.

I keep getting the message "S R is not able to protect your computer. Please restart and run SR again"............This advice does not work. for me!
I cannot turn off SR for the same reason.

I then checked out this section of the forum and discovered that many people have had this same problem. I have tried downloading Kelly's file 238 (I think that was the number) ; I have tried accessing services.msc ; I have tried accessing i386: nothing!

I did get the message "Error 1075: "Dependency service does not exist or has been marked for deletion". This error seeems to apply to many facilities on a PC.

I have my windows XP disk but cannot lay my hands on the SP2 one so I don't want to mess about without your professional advice to do so!! (apologies!)

As I said, if you solve my problem you will be miracle workers and worthy of your wings.

My thanks for any help you can offer me.

A:System Restore Won't Work : Error 1075

Right click My Computer > Manage > Expand Event Viewer > Look under Application and/or System to see if there is any event reporting on about System Restore.

Please do let us know if there is, a screenshot would be a great help.

Another workaround would be searching for sr.inf, right click it and select "Install". You might need Window XP install disc.

61 more replies
Answer Match 55.86%

Hey Everyone.

Maybe someone could be of help. I have gone through several different forums and have attempted several ways to try to fix this but have had no luck.

I have tried the netsch winsock reset
I have tried the ipconfig /renew
My DNS service starts but my dchp client doesnt want to and gives me the error 1075.
I have removed NAV still nothing.

I have also tried many other alternatives but im just not remembering at the moment and I am just stumped.

Internet works on my other two computers, but my laptop is what seems to not want to connect wirelessly or routed. Something seems to be blocked or missing.

If anyone can please help me in any way possible it would greatly be appreciated. If you need me to provide some more details please let me know.

Thanks
Lewis B.
 

A:Error 1075/No Internet after Norton Anti Virus

16 more replies
Answer Match 55.86%

This is my sister's netbook. The problems started with one of those new "fake antivirus" that puts up a ton of obviously fake results that claim your computer is highly infected*. She being... less technologically inclined apparently decided to run the "Antivirus scan" over and over again over night and then the next day gave it to me to try to figure out what was wrong. I can't find the links right now but I found a bunch of blogs that mentioned (Privacyprotection.exe) and among the most frustrating aspects what that it blocked pretty much everything from running. I did a bit of digging and eventually found out it was a rootkit causing the issues and the tools they gave me wouldn't run but I was able to follow the manual instructions. (remove the .exe, remove the alias, regedit and remove the key that matched privacyprotection.exe but not the other ones like the one underchrome etc).That took care of the major problem and I was able to get Microsoft Security Essentials running but everyscan kept turning up a few "Trojans" and that upon trying to clean would result in an error. The error would lead to 'restart to finish removel'. I tried safe mode and the same result. One top of that google results kept getting redirected (forget the site right now.. something like awesomesearch.com or what have you). I decided to try from another angle the redirect angle and found thishttp://www.bleepingcomputer.com/forums/topic422038.htmlI t... Read more

More replies
Answer Match 55.86%

My computer (vista) was infected with a virus. So I first used rkill/iexplore then ran Malwarebytes Anti-Malware since my protection (Panda) doesn't seem to do its job correctly. The first time I did this, everything seemed to return to normal. Couple of days later, the same virus started up. I redid what I did...and it seemed to work again...until I tried using the internet. (I think Malwarebytes deleted something in the registry?)

There was an error saying that "DHCP error 1075: The dependancy service either does not exist or has been marked for deletion". I googled this on my laptop and followed some of the instructions found online. None of it worked...

I went into device manager->hiddle files->non plug and play drivers:
There was a problem with these with the same code for them: This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)
App Filter Plugin
NetMon Filter Plugin
Panda Net Driver [TDI Layer]
VSCore mferkdk

Finally, I have included the last three logs from Malwarebytes showing which files were deleted by the program.

Thank you for looking over this!!

A:DHCP error 1075- Internet Doesn't Work

There is a dedicated forum for virus/malware issues regardless of your Windows version.
It's here: Virus/Trojan/Spyware Help - Tech Support Forum

(We aren't permitted to give virus removal help on the Windows forums)

2 more replies
Answer Match 55.86%

Hey all!
I am really desperate. I've tried a few things that other people have posted here, especially Cookiegal and Lumpola but this issue persists.

I had a virus. I think I got rid of it. Avast scans and boot time scans and Super Anti Spyware and TDSS killer report all clear. However, the network shield of Avast and the Internet don't work.
Points to note:
1. In services, the DHCP and DNS cannot be started. I get the error 1075: service has been marked for deletion or one of it's dependancies are missing. (close to that)

I've checked the dependancies of both, and reinstated the ADF module in device manager after selecting the 'View Hidden' option.
 

A:DHCP Server Service -Error 1075 - not starting

2. I've tried deleting the winsock and winsock2 entries in the registry.
3. From the command prompt, SFC/scan now terminates at 82%. thrice.
4. I can see the network, both wired and wireless, I can connect, but it says I have limited connectivity.
 

3 more replies
Answer Match 55.44%

Hello,

On July 12th 2012, my computer installed updates. After rebooting and waiting for me on the login screen, I gave it a hard shutdown to check on the BIOS settings (for a little side project, in the end I did not save any changes). After booting and logging in again, I find that many services are not running. I ran a very thorough check for malware and viruses (took over 24 hours to complete), and still no solutions. I have uninstalled/reinstalled my Broadcom 802.11g Wireless Driver several times.
I now look in the Event Viewer and find that the DHCP Client service is not running! It is set to automatic start in Services.msc, but when I try to manually start it, it gives me error 1075 (some dependencies do not exist or are marked for deletion). Running ipconfig, I notice that my system is using an APIPA-formatted address (169.254.x.x), indicating that the computer couldn't find a DHCP server.

My Event Viewer is peppered with:
------------------------------------------------------------------------------------------------
Event 7003, Service Control Manager

The DHCP Client service depends the following service: Afd. This service might not be installed.
------------------------------------------------------------------------------------------------
Event 7001, Service Control Manager

The WinHTTP Web Proxy Auto-Discovery Service service depends on the DHCP CLient service which failed to start because of the following error: The dependcy service does not ex... Read more

A:DHCP Client Service FAILS TO START! (Error 1075)

It sure sounds like your computer is having its share of issues. Did you get the services started that you mentioned in your other thread?

7 more replies
Answer Match 55.44%

This is really bad.. I cant copy and paste to backup files for reformat and this sony laptop is telling me that the recovery will delete all files, so no option to do a windows repair. I might need to buy a 2.5 to 3.5 adaptor for this mess im in, if you cant help.. I did many things so far nothing worked..

I had a virus that would not allow me to get any icons, this was fixed after i ran avg in safe mode.

When i got back into the machine I received many pop ups one after another, ad-aware was run and after I cannot start any services, I have everything set to start in msconfig i have admin I cant change users, i cant do windows search, cant see any networks in network places nothing i cant even copy and paste the paste option is Grey when i try to copy then paste...

Every service I try to start i get error 1075 dependency service does not exist for all services.

also the Extended services tab give me nothing not list of any services only the standard tab.. I can click start and i get the error.

also Ad-aware gives me an error too when it tries to start system error 1810 has occurred service is not online.

Maybe i need to do a system restore i hope i don't lose all the pictures etc.. I cant copy and paste and its a laptop so i would need an adapter to put it on a desktop.. i think i will be OK with a system restore.
 

More replies
Answer Match 55.44%

Avg found two trojans. It didn't seem like it removed them. Internet was working though. Ran malwarebytes it found nothing. Internet was still working. Started Having connectivity issues. My dhcp client service won't start. I got a 1075 error. my internet via wifi or wired. I ran the following command prompts:
net start AFD (response: the requested has already been started)
netsh int ip reset reset.log (response: resetting echo request, failed. Access is denied. Rebooting interface, ok! A reboot is required to complete this action.
netsh winsock reset catalog (response: successfully reset the winsock catalog. You must restart the computer in order to complete the reset.
SFC /SCANNOW (scan finishes and shows this response: windows resource protection found corrupt files but was unable to fix some of them. Details are included in the cbs.log windir\logs\cbs\cbs.log

What now? Please help.
 

A:Network issue dhcp client service error 1075

I'm thinking you're still infected.

----------------------------------------------------------------------

You need to start a thread in the Virus & Other Malware Removal section of this site.

Before you post though, you need to read THIS guide.
 

1 more replies
Answer Match 55.44%

i have been fighting with this problem for ages.
my sound does not work, i dont know why, as far as i know, nothing was added before this started, everything was working, i got up the next day and there was no audio, it no longer registers my disc drive as being there, and i cant play an videos from youtube (other sites fine, though still no audio)
laptop tells me, theres no audio installed, but all drivers state everything present. tried on here before but with no luck

heres a run down from my last post:

i have no audio. if i click troubleshoot problems it says the audio service is not running
it says the windows audio and endpoint builder arent working
if i go into services, windows audio is set to automatic but its not on, when i click start it says "error:1075 the dependency service does not exist or has been marked for deletion"

medion akoya e6214 notebook
windows 7 64 bit sp1 home premium edition
intel core i3cpu [email protected]
4gb memory
2 ram i think
also, i have no system restore points, the windows repair disc doesnt work and i have no windows 7 install disc and cant burn one as my disc drive wont register

i have installed drivers for medion akoya as instructed but it did nothing

windows audio still states its not working, when i go to services, its set to automatic but wont stay on and i get the above error message!

im at my wits end, i cant back up anything so i dont lose it, cant restore, or repair, sfc scannow says i cant do it unless im admi... Read more

A:windows audio: error 1075 the dependency service does not exist or has

From your description there are many more problems than just the windows audio error.

I would suspect an Operating System problem. If you can find a friend to download the Windows 7 Home Premium ISO and burn it to a DVD, that would give you the needed disc to try and repair Windows. Although your DVD drive does not work in Windows, it should work for booting.

Here is the link to the forum post. There are links to the various versions. You can download the same version that you have.
Official Windows 7 SP1 ISO Image Downloads | Windows 7 Forums

4 more replies
Answer Match 55.44%

I had a virus that would not allow me to get any icons, this was fixed after i ran avg in safe mode.

When i got back into the machine I received many pop ups one after another, ad-aware was run and after I cannot start any services, I have everything set to start in msconfig i have admin I cant change users, i cant do windows search, cant see any networks in network places nothing i cant even copy and paste the paste option is Grey when i try to copy then paste...

Every service I try to start i get error 1075 dependency service does not exist for all services.

also the Extended services tab give me nothing not list of any services only the standard tab.. I can click start and i get the error.

also Ad-aware gives me an error too when it tries to start system error 1810 has occurred service is not online.

Maybe i need to do a system restore i hope i don't lose all the pictures etc.. I cant copy and paste and its a laptop so i would need an adapter to put it on a desktop.. i think i will be OK with a system restore.

More replies
Answer Match 55.44%

I have a similar problem.... turn on print spooler, then go to add a printer and it says the print spooler is not running. round and round I go.

More replies
Answer Match 54.6%

Apparently something called print spooling is not working on my computer. I get error message 1075: the dependency service does not exist or has been marked for deletion. I believe this is why the installation won't go all the way to the end. The computer recognizes the printer but won't go ahead and finish installing it. Anybody got any suggestions?

A:Printer installation won't complete. Error 1075: the dependency service does not exis

Are you using Windows ME or Windows XP?

14 more replies
Answer Match 54.6%

Hi when i try to run my windows XP sp2 windows firewall to stop it from disabling my connections. i get the message "Windows firewall cannot be displayed because the associated service is not running. Do you want to start the Windows firewall/internet connection Sharing (ICS) service?" i click yes then i get "Windows cannot start the Windows firewall/internet connection sharing (ICS) service.". i then went start>run>services.msc and found that when i try to manually run the Windows firewall/ICS i get this message "Could not start the WF/ICS service on Local Computer. Error 1075 the dependancy service either does not exist or has been marked for deletion." Please help me. I just want to be able to open my ports and host Warcraft 3 games.
 

A:Windows Firewall/Internet Connection Service cannot start...error 1075.

6 more replies
Answer Match 54.18%

After a Trojan attack, I used Kaspersky Virus Remover to remove them. It seems to have been successful, but now I can't access the internet.

Below are clues to resolving the problem. I just don't know what to do next.

Can you help? I'm using XP sp3.

=================

The following files are present in /Windows/System32/Drivers folder...
* afd.sys
* tcpip.sys
* netbt.sys (It was missing; so I copied to here from ServicePackFiles/i386)

=================

CMD /K SC QC DHCP reported this...

[SC] GetServiceConfig SUCCESS

SERVICE_NAME: dhcp
TYPE : 20 WIN32_SHARE_PROCESS
START_TYPE : 2 AUTO_START
ERROR_CONTROL : 1 NORMAL
BINARY_PATH_NAME : C:WINDOWS\system32\svchost.exe -k netsvcs
LOAD_ORDER_GROUP : TDI
TAG : 0
DISPLAY_NAME : DHCP Client
DEPENDENCIES : Tcpip
: Afd
: NetBT
SERVICE_START_NAME : LocalSystem

=================

In Device Manager,
* AFD Networking Support Environment is running successfully
* TCP/IP Protocol Driver is running successfully
* NetBios over Tcpip - DOES NOT EXIST

=================

In services when attempting to Start these services

* DHCP Client Properties (Local Computer) and
* TCP/IP NetBIOS Helper

I got these errors...

* Could not start the DHCP Client service on Local Computer
* Could not start the TCP/IP NetBIOS Helper service on Local Computer
* Error 1075: The dependency service does not exist or has been marked for deletion.
* Under the dependencies tab: No Dependencies in either box.

=================

Start, Run, SF... Read more

A:Cannot Access Internet after Virus Removal - Netbt.sys, NetBios missing - Error 1075

16 more replies
Answer Match 54.18%

Can someone please help, I can't connect to the internet whenever I connect it just connects local only and says the dhcp client isn't working on this computer when I go into services to manual start it says windows could not start the dhcp client on local computer error 1075 the dependency service does not exist or has been marked for deletion it happens on anyones internet I cant connect to wired and wireless, any help will be really appreciated as I have been trying to fix this for weeks now

A:windows could not start the dhcp client on local computer error 1075 the dependency s

Hello, lets do some cleaning up and see if that helps you out .
How to Flush DNS in Windows Using the Command Prompt

Step 1 ? Close all open web browsers and applications on your computer.

Step 2 ? Open the Windows command prompt by selecting the ?Start? menu and then go all programs, accessories, then right click command and run as admin.

Step 3 ? At the command prompt, enter ?ipconfig /flushdns? followed by pressing the ?enter? key. After a moment, Windows will display a message similar to: ?Successfully flushed the DNS Resolver Cache.? Once the message is displayed, the DNS will be flushed removing all incorrect entries.

Then , we want to get the IP reset, so, lets renew its settings and see if this also helps out :
you will type in the command box : ipconfig /release then enter, then next ipconfig /renew then enter, this will reset the IP , now restart and attempt to have it reconfigure its connections to your router. Post back results please.

3 more replies
Answer Match 52.5%

Hi,

I'm trying to access SQL from other domain windows credentials (not as administrator). Using the below runas command

C:\Users\XYZ>runas /netonly /user: <domain>\<windowusername>"C:\Program Files (x86)\Microsoft SQL Server\120\Tools\Binn\ManagementStudio\Ssms.exe"
Enter the password for :

RUNAS ERROR: Unable to acquire user password

I was able to access the SQL using the same command with windows user of other domain, but now it is displaying the above error message, can you please let me know where have I gone wrong.

Thanks for kind assistance.

Regards,
Sandeep
 

A:runas error: Unable to acquire user password

Does this link help? http://stackoverflow.com/questions/2859271/runas-error-unable-to-acquire-password
 

1 more replies
Answer Match 51.24%

Greetings

I'm lost with this computer that I'm working on. It will not acquire a network address. I've moved the computer from the house it was in to mine and tried setting it on my network (which I know has no problem) either wireless or LAN it will not connect. I also notice that there is something called client services for netware which is limiting me from logging on and off the normal way. I have searched for the instructions for removing this service and It's not showing up as the instructions show. Any suggestions????
Smitty
 

A:Solved: Can not acquire a network address

14 more replies
Answer Match 51.24%

Hi everyone, my family recently updated (or so we thought) to Sky Broadband using our Netgear router, and it's been giving us some problems. My computer upstairs connects to this one through the wireless router, and suddenly it won't let me get past the 'acquiring network address' stage. The icon in the taskbar constantly flashes from red to green, and I can't access the internet at all. This downstairs one that's directly connected to the router works though, so I have no idea why mine won't. I'm running Windows XP. I'm definitely a beginner, so please don't get too technical!

Thanks in advance for any help,

Helen.

ISP: Sky Broadband
Router: Well, downstairs it's NETGEAR WG511v2 (My router is a USB one that connects to this one)
Connection Type: Wireless
Encryption Used: WPA
OS: XP Home Edition
Browser: Mozilla Firefox (but IE doesn't work either)

When I change the encryption to WEP or disable it, it doesn't work at all.
 

A:Solved: Cannot 'acquire network address'...

Uh, never mind. I disabled all my firewalls, changed the encryption to 'Disable', applied it, took out the usb router, restarted, plugged it back in, changed the connection back to WPA, entered the pass phrase (with caps lock on, despite it telling me to turn it off) and all is working fine. This is now from the upstairs/my computer.

Turns out this router USB thingy is called NETGEAR WG111v2, just in case that matters to anyone!
 

1 more replies
Answer Match 51.24%

Hi, I have a canon sd300 powershot digital camera.
Until recently it was working fine except that now when I hook it up to the computer to acquire the photos that we have taken, nothing happens. Actually the computer eventually freezes and it when I hit ctr,alt,delete it says msgsrv32 not responding.

I think the computer has been saying that for awhile but we were still able to download photos.

I have windows 98.

Any suggestions would be appreciated.

Thanks,
Kathie
 

A:Solved: can no longer acquire images

16 more replies
Answer Match 50.4%

Hey all, I would like to apologize in advance if this problem has been posted numerous times before and is easily resolved. I've worked with computers for a major part of my life, but I've never been in-depth with them.

Alright, now straight to the point.

Specifications:
My laptop is a Sony Vaio VGN-Z16SN running on Microsoft Windows XP Professional, Service Pack 3.

Problem:
For internet access, I've always connected my computer via ethernet cable and never have I had any problems with it until yesterday at least. When I connect it the status shows "Limited or no connectivity", I've tried connecting repairing the connection but it returns with "Windows could not finish repairing the problem because the following action cannot be completed: Renewing your IP address". The IP address shows 0.0.0.0 and Subnet Mask 0.0.0.0. Under 'Services' in the administrative tools, I've checked that the DNS Client as well as the DHCP Client are both running. I've tried manually entering the IP Address, but to no avail, the connection status would show "Connected" but but I am unable to actually use the internet showing "Server not found" on my internet browsers, therefore I set it back to Auto. Under command prompt, whenever I type ipconfig /renew the following error would occur:

Windows IP Configuration

No operation can be performed on while it has its media disconnected.
No operation can be performed on Wire... Read more

A:Solved: Connection Problem (Can't acquire new IP address)

7 more replies
Answer Match 50.4%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 4010 Mb
Graphics Card: Intel(R) HD Graphics Family, 1813 Mb
Hard Drives: C: Total - 596476 MB, Free - 540290 MB; D: Total - 14000 MB, Free - 7272 MB;
Motherboard: Dell Inc.,
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled

I'm using FOX News as my Home Page. I would like to use Google as my Search engine. I've looked everywhere and searched everywhere but no luck in finding how to get it ... I'm stumped. John
 

A:Solved: How To Acquire Google Search Engine

16 more replies
Answer Match 50.4%

Hi Folks,

I'm trying to connect my work laptop to the internet. It's a DSL connection which goes thru a router, then thru a wireless router. The laptop isn't wireless so I'm using a LAN cable to connect the laptop to the wireless router. It's showing a connection with "Limited or no Connectivity".

Here's the ipconfig /all:
Windows IP Configuration
Host Name . . . . . . . . . . . . : TRANDOLPHR51
Primary Dns Suffix . . . . . . . : best.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection 4:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-10-C6-E1-87-9C
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Autoconfiguration IP Address. . . : 169.254.66.113
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :

Note that the Default Gateway does not have an address listed.

Please help, thanks!
 

A:Solved: Can't acquire network address on wired LAN

7 more replies
Answer Match 50.4%

I have an HP pavilion mx 70 desktop and an hp laptop. The desktop is connected via ethernet to the router, and the laptop is wireless. The modem is separate. I have cable highspeed internet access. Up until about a week ago both computers were able to access the internet. All of a sudden, neither computer could get on the internet through the router. I have to run the ethernet cable directly to the modem, and then I can get on the internet.

I can't acquire a network address - it just gets stuck, and I get the same message, this connection has little or no connectivity.

The router was a linsys. I thought that was the problem, so I bought a new d-link router, but same issues - no internet.

D-link tech support walked me through assigning a static address and pinging, but no luck. I can't even get into the router by typing its address into the browser.

Device Manager doesn't indicate that there is any problem with the nic card, but I did uninstall it and then reboot.

I have turned off, reset, etc. both the modem and router.

I have also tried release and also tried somethin with winsock

I am just computer literate enough to function, and to get myself in trouble, but I would appreciate any help.
 

A:Solved: help - little or no connectivity - can't acquire network address

16 more replies
Answer Match 49.98%

Hi, I'm finally fed up with my bootups. In the summer I installed fresh XP and did some tweaking on it. All wen't well except for this little bit System doesn't acquire ip on boot before you boot up the switch too. I'm running Ubuntu on my laptop and I've had some other XP and Vista comps here and network works well for other systems. I have TP-Link wlan-router for internet connection and after that TP-Link 1000/100/10 switch that manages wired connections. NAT is on and as I referred, everything else works fine but this XP-machine. Has enyone encountered similar things with XP (or Vista?) and what should I do? Next stage is reinstalling XP, but don't wanna do that so easily.
 

A:Solved: XP doesn't acquire ip on bootup before booting switch

15 more replies
Answer Match 44.94%

When I get an email it automatically blocks the pictures unless the sender is in my address book. I would like for it to automatically view all pictures from all emails.

Also I use Yahoo! mail, and would like to know how to get saved e-mails from folders on my Yahoo! mail (such as my Pictures folder) to Thunderbird.

Thanks!
 

A:Solved: Thunderbird 2.0 questions: get rid of "load image" button and acquire folders

This article explains why automatically loading images from unknowns (who may be spammers wanting to verify your email address) but also describes how to do it.

If you get the paid version of Yahoo! mail you can download messages. However, I don't know if you can convert your free account to paid; in other words, this may not do any good for messages you already have.

Of course, you can forward your Yahoo! messages to a POP3 or IMAP account.
 

2 more replies
Answer Match 44.94%

IGNORE IGNORE.... fixed it thanks anyway
Hi there,
I am having trouble connecting to the internet from my laptop via a D-Link wireless ADSL router.

This is a new problem on a laptop that has been used on this wireless network many times - very strange?

When i click "repair" it seems to hang at the point of acquiring my IP address.
Any ideas?
Thanks
 

A:Solved: Wireless network connection can not acquire network address?

Through the web browser on my desktop i changed some settings on the router i.e. the WPA, and it seemed to work? Magic
 

2 more replies
Answer Match 44.52%

I just set up a wireless network for my apartment and my two roomates are able to wirelessly connect to it but I am not. I am wired into the router now and when I try to wirelessly connect (without being plugged into the router of course) It gets stuck at "Acquiring Network Address". I am using windows XP on a dell inspiron laptop. I am pretty sure it is not my adapter as I tried a loopback test and it worked. The router is a basic Linksys Wireless G Router. I'm not sure what information to include so please tell me or point me to a similar thread to read.

Also: I read to uninstall and then reinstall my adapter but I am worried about doing this because im not sure how to reinstall it.

edit: I have also tried to Repair function from the Network Connections window.
 

A:Solved: Cannot "Acquire Network Address"

I'm no expert, but may be able to suggest some things.

Go to START / Control Panel / Network Connections / {RightClick} Wireless

Make sure TCP/IP is selected.

Then try and connect again. If no love, go to START / Run / {Type} cmd {enter} / and in the command line prompt type

ipconfig /all

and then post what is displayed back in these forums, I am sure someone wiwll know where to go from there.

Hunter
 

3 more replies
Answer Match 44.1%

As of recently, I may have edited one registry after previously messing with a registry deletion using AVP cleaner. Now my LAN internet connection won't get past Acquiring Network and also my IP/Subnet are both 0.0.0.0 and my default gateway is blank. Someone please help me please
 

A:DHCP & TCP/IP getting #1075 Errors

16 more replies
Answer Match 43.26%

Recently purchased a new computer. I was having issues with installing Windows 7 and learned that HyperTransport is sometimes the cause of the issue and by turning it from "Auto" in the BIOS settings to "X1" can resolve the issue, and for me it did.

After installing Windows 7 and waiting to see if there were any other errors I went back to turn HyperTransport back to "Auto" I'm above computer savvy, but not far when it comes to hardware, I'm more of a software kind of guy. After doing so I was receiving consistent BSOD's. And after turning HyberTransport back to "X1" they went away narrowing it down to this being my issue.

I didn't know if updating my BIOS would help the issue so I decided to ask around first.

Computer Specs:

AMD Phenom II X6 1075T with HyperTransport
Gigabyte GA-870A-UD3
8Gig of Corsair Dominator
ATI Radeon HD 5770 1Gig

I have no idea about the power that any of these pieces should be receiving, nor if that would even be the cause of the problem. Also, windows freezes along with the BSODs saying that a video driver went out but was recovered, I just installed the latest video drivers. At the time of posting this the computer has been running for 2hours without HyperTransport set to "Auto"

Would updating the BIOS fix the problem?

Thank you!
 

More replies
Answer Match 41.58%

Recently I set up a computer for a friend from scrap parts I had. The computer was installed with XP pro and everything was going all good, until today.
He has been connected to his neighbors internet and it was working up until probably 4 or so hours ago. Nothing changed at all just suddenly it wouldn't acquire an IP address. I have tried letting him use my wireless adapter to be sure it wasn't the one he was using, but no success. I tried removing his new wireless mouse and keyboard to be sure that was not a problem, and still no success. I did a system restore to a day before when the internet worked fine, and again no success. So finally out of desperation we restored the computer and formatted it with windows xp pro again, everything is fresh we installed the wireless adapter and tried to connect, as you guessed it no cigar. I am currently connected to his neighbors internet (win7 x64 premium) and have no issues whatsoever, the signal isn't perfect but definitely adequate. What is going on? What can we do to resolve this issue? It seems if anything would fix that it would be an entire clean install of Windows, however that's not the case. Any idea's or input is appreciated, Thanks in advance
 

A:Cannot acquire an IP

He has been connected to his neighbors internetClick to expand...

Please re-read the rules
http://www.techguy.org/rules.html
WiFi "Piggybacking" / "Wardriving" - We do not support the act of using someone else's Internet without permission. Also, please note that almost every ISP prohibits sharing your Internet connection with another home, and we will not assist you in breaking their rules.Click to expand...

closing this post
 

1 more replies
Answer Match 41.16%

I have a Belkin wireless router attached to my computer. It was set up as an access point, with an IP address of 192.168.0.254. I had some problems with the network today and could not access this unit by typing in the IP in my browser. I feel certain that is the IP address I put in it when setting it up, as I have a record I kept of all the settings. Is there a way to retrieve the IP address to verify that is what it is set to?
 

A:How to acquire IP address?

That it wasen't 192.168.1.254 not 0.254 as you posted?

just a thought,

Regards

Ibizagreg
 

3 more replies
Answer Match 41.16%

My computer cannot acquire an I.P. address, no matter what network i connect to. Its running Windows XP SP2 and Ubuntu dual boot, and I can't connect to a wireless network in either.

I used to be connected to a wireless network which only accepted my MAC Address and I had no problems with that. I moved house and haven't had an internet connection since I moved apart from an ethernet cable connected to another computer. I tried to plug this ethernet into my computer, but the IP couldn't be acquired. I tried to use my phone as a modem, and got the same problem. I also brought my computer to another house to try connect it to their wireless and again received the same problem. If I set the I.P. to one in the range manually, it says its connected, but no websites will load. I have tried every solution I found online and none worked.
PLEASE HELP.

A:Cannot acquire IP Address

Try this tool - http://www.softpedia.com/get/Tweak/N...P-Repair.shtml

If it does not work try running these commands from thr run dialogue box or command prompt:

netsh int ip reset resetlog.txt
netsh winsock reset

1 more replies
Answer Match 41.16%

My computer cannot acquire an I.P. address, no matter what network i connect to. Its running Windows XP SP2 and Ubuntu dual boot, and I can't connect to a wireless network in either.

I used to be connected to a wireless network which only accepted my MAC Address and I had no problems with that. I moved house and haven't had an internet connection since I moved apart from an ethernet cable connected to another computer. I tried to plug this ethernet into my computer, but the IP couldn't be acquired. I tried to use my phone as a modem, and got the same problem. I also brought my computer to another house to try connect it to their wireless and again received the same problem. If I set the I.P. to one in the range manually, it says its connected, but no websites will load. I have tried every solution I found online and none worked.
PLEASE HELP.
 

A:Cannot acquire IP Address

6 more replies
Answer Match 41.16%

I just got a Toshiba Satellite Pro laptop. It's a little older bu not that old it's a P3 designed for XP pro or 2000. I hot the power button and a green light comes on nothing else. I hold down the power button and it will power down. My gut reaction say's I have to open it. Maybe the monitor connection is bad. I am limited in laptop repair any help would be appreciated. Thank you.

D0C
 

A:just happened to acquire this

bump
 

3 more replies
Answer Match 41.16%

my internet was working fine till today when my sister turned on the computer and she can't get on the internet. i checked my connection and it said acquiring ip address. Other computers at my house are working fine. I have window xp service pack 3. help please?
 

A:can't acquire ip address

6 more replies
Answer Match 41.16%

my network wont share its internet connection correctly. i have the DHCP enabled and the clients cant connect. the connection is shared on the server and the clients cant connect. occasionally when im screwing around with it, i can get the clients to the "acquiring network address" step and they time out. why are they trying to acquire a new network address? if the connection is shared it should assign them something like 192.168.x.x right? the network was fully functional once upon a time and it stopped awhile before service pack 2 even came out. i can share/view files from all the clients and the server and visa versa but no internet function. please help me understand why the IPs wont assign right. thanks in advance for any help provided

_NETWORK LAYOUT_
cable modem ->
server NIC#1 - (shared connection) 3Com EtherLink XL 10/100 PCI ->
server NIC#2 - (On-board) Intel(R) PRO/100 VE ->
netgear 8-port 10/100Mbps Dual Speed Hub Model DS108 ->
clients:
#1 Compaq Evo with Realtek RTL 8139 Family PCI Fast Ethernet NIC
#2 HP somethingoranother with 3Com 3c905TX-based Ethernet Adapter (Generic)
#3 HP Visualize X-Class with Intel(R) 82559 Fast Ethernet LAN
 

A:cant acquire network IP

15 more replies
Answer Match 41.16%

I can't seem to connect to the internet. I called the comcast tech guy and he told me that the problem is that my computer can't acquire an ip adress. I'm connecting my laptop to the internet with the same modem that I use for the computer so obviously the problem is with the computer. The operating system is Windows XP. This all started after I got a malware program on my computer. I rebooted in safe mode and ran Malwarebytes' Anti-Malware and it got rid of the malware, but since than my computer freezes for 5 minutes on the start up screen every time I reboot and its not connecting to the internet. I can deal with the 5 minute freeze for now, but I really need to connect it to the internet. Anyone have any ideas?
 

A:Can't acquire an IP adress

Give us as much of this info as you can.
Iconfig /all will give us the pc's view of it's network.
Pings will give us some idea as to the connectivity of your pc.

From a Johnwill post on the Networking Forum

Try these simple tests.

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

In the command prompt window that opens, type the following commands one at a time, followed by the Enter key:

IPCONFIG /ALL

PING <computer_IP_address> For addresses,follow instructions below&#8230;.

PING <default_gateway_address>

PING <dns_servers>

PING 206.190.60.37

PING www.yahoo.com
Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

<computer_IP_address> - The IP Address of your computer, obtained from the IPCONFIG command above. IPV4 for Vista

<default_gateway_address> - The IP address of the Default Gateway, obtained from the IPCONFIG command above.

<dns_servers> - The IP address of the first (or only) address for DNS Servers, obtained from the IPCONFIG command above.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
______
 

2 more replies
Answer Match 41.16%

In WinXP and Panda software I am having a problem. I cannot in wired or wireless networks acquire a network address.
Both are available on another computer.
Help needed
Paul
 

A:cant acquire network

plschwartz,

What equipment are you using? Model number, etc. Also, have you tried cycling power on your equipment? Power everything down (modem, router, PC). Power on modem, wait 5 minutes. Power on router, wait 5 minutes, power on trouble PC. Also, please post OS and ipconfig /all results.
 

2 more replies
Answer Match 41.16%

Hi I have the exact same problem as this: forums.techguy.org/virus-other-malware-removal/1029302-cannot-acquire-ip-address-3.HTML it says solved but it doesn't say how. If someone could please let me know the outcome/solution to this problem that would be greatly appreciated. The poster was goarmc
 

More replies
Answer Match 41.16%

I can no longer access network/internet....appears to be hung up trying to acquire IP address. Have never had a problem until yesterday.

I tried the ipconfig/release, ipconfig/renew, have run various anti-virus and registry cleanup programs, turned off and removed anti-virus and security programs, disabled and enabled network adapters, but nothing has worked.

Here's my system info:

Model: DELL Dimension 5150

OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz, x86 Family 15 Model 4 Stepping 3
Processor Count: 2
RAM: 1022 Mb
Graphics Card: ATI Radeon X300/X550/X1050 Series, 128 Mb
Hard Drives: C: Total - 147769 MB, Free - 8971 MB;
Motherboard: Dell Inc., 0RD203
Antivirus: None
Router: D-Link Air Plus Extreme DI-624
Modem: Motorola SB5101 Surfboard

Here is the ipconfig/all results:
Windows IP Configuration

Host Name . . . . . . . . . . . . : GORD
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : phub.net.cable.rogers.com
Description . . . . . . . . . . . : Intel(R) PRO/100 VE Network Connection
Physical Address. . . . . . . . . : 00-12-3F-A8-23-10
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 0.0.0.0
Subnet Mask . . . . . . . . . . . : 0.0.0.0
Defaul... Read more

A:Cannot acquire IP address

16 more replies
Answer Match 41.16%

HI there,

Okies....all of a sudden my main PC wont acquire an IP address from my wireless network. I suspected that it was the router and binned it, I bought a new and set it up. Its now running and secure and Ive got my laptop connected to it flawlessly.

I guess the problem isnt with the Router or network. So it must be the card or PC?

The belkin wireless utility sees the netwrok and thinks that it is connected with limited connectivity but the windows icon (with the little ball rolling side to side) says that it is acquiring network and goes on for hours until I stop it.

I have tried to repair it and force it to acquire but to avail.

Any help would be greatly appreciated!!

Dave
 

A:Cant acquire IP address?!

16 more replies
Answer Match 41.16%

I have had to reload windows XP on a Phillips LS1600 desktop PC. Previously the pc linked wirelessly to my home network although it was a bit difficult to get the MSI 802.11b/g wireless LAN to acquire an IP address. Since reloading the operating systems it has again been impossible to get the pc to link to the wireless network stating that the pc cannot acquire an ip address. I have tried a Netgear WG111T usb wireless adaptor and a Belkin 7050 usb wireless adaptor but both of these have the same problem. I have updated all drivers, disabled unwanted adaptors, disabled all firewalls, run winsockxpfix, rebooted the router but still connections cannot acquire an IP address. Two other pcs are connecting well.
I am thinking of connecting using a wired connection and update XP (if it will let me). Please advise.
 

A:Cannot acquire IP address

Try running cmd and doing
ipconfig /release
ipconfig /renew
 

3 more replies
Answer Match 41.16%

Hi Guys,

I have 3 Laptops and a Media Center and 3 IPhones Which Use The Wireless In My House. Until Recenty All Have Worked Fine, But I Turned One Of The Laptops On The Other Day And It Keeps Saying "Aquiering IP Address" Then After about 10 Mins It Says Unable To Connect.

I Havnt Changed Anything Since It Last Worked.

I have Tried Uninstalling and Re installing WLAN Drivers But Is Still Says Unable to Connect After To Mins Of Aquiering IP

Thanks
 

A:Laptop won't acquire IP

Are you 100 per cent sure you are inputting the right encryption level?
 

5 more replies
Answer Match 40.74%

I have a network with 3 computers using a Netgear router and a Netgear adapter on 2 computers. One of the PCs when booted up is not connecting. It tries to find the IP address but can't. I try to "repair" it and it again tries to acquire the network address, but can't. The only way to get it to connect is to go into Properties/Network Connections and check the box to have Windows do the configuration. What do I need to do to get it to connect automatically again?
 

A:Can't Acquire Network Address

16 more replies
Answer Match 40.74%

A few days ago the internet randomly stopped working and remained stuck on 'acquiring network address', or something like that, before coming up with a 'limited or no connectivity' message. Apparently our Linksys router was the problem, since my husband's computer has normal internet access when wired directly to the modem. Recently we bought a new router, still a Linksys (though this one is model WRT54GS V7.2) which has the exact same problem -- the install software won't even run because it apparently can't detect a new gateway or router. We've tried installing the router software on my own computer following the same instructions from the install CD, but ended up with the exact same problem as on my husband's computer. We've tried restarting and refreshing the IP numerous times, though none have worked.
We also tried plugging in the router to the modem and a computer without running the installation software, and the computer recognizes the router enough to again search for the network address, though it never finds anything.
What could be the problem?

Both our computers run Windows XP SP2, and though the router we use is capable of wireless we connect all our computers to it through regular ethernet wires.
 

A:Cannot acquire network address..?

TCP/IP stack repair options for use with Windows XP with SP2/SP3.

Start, Run, CMD to open a command prompt:

In the command prompt window that opens, type type the following commands:

Note: Type only the text in bold for the following commands.

Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log

Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog

Reboot the machine.

Try these simple tests.

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

In the command prompt window that opens, type type the following commands one at a time, followed by the Enter key:

IPCONFIG /ALL

PING <computer_IP_address>

PING <default_gateway_address>

PING <dns_servers>

PING 206.190.60.37

PING yahoo.com

Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

<computer_IP_address> - The IP Address of your computer, obtained from the IPCONFIG command above.

<default_gateway_address> - The IP address of the Default Gateway, obtained from the IPCONFIG command above.

<dns_servers> - The IP address of the first (or only) address for DNS Servers, obtained from the IPCONFIG command above.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

3 more replies
Answer Match 40.74%

With the addition of PC Tools, Symantec will expand its consumer product portfolio to include award-winning PC utilities software and point security technologies. PC Tools will help Symantec expand its reach with consumers in new emerging regional markets and will bring an array of go-to-market capabilities, that have been effective with consumers in many markets around the world.Full press release here:http://www.symantec.com/about/news/release...rid=20080818_02I'm reminded of Sygate...

A:Symantec To Acquire Pctools

Thats a bit unfortunate. I wonder what they will do to all the products.

4 more replies
Answer Match 40.74%

Although my wireless PC card can see my router, and is connected to it, it gets stuck on "acquiring network address". Able to connect through router using cable. My Wii is having no problem with the WiFi. Signal is strong, and I can see the 15 other (secured) networks around me.

The equipment:

Netgear WFR614 router
Netgear WG511v2 PC card
Dell Insprion Laptop

Firewall disabled for this fun process.

Results of ipconfig:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

Windows IP Configuration
Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1

Ethernet adapter Wireless Network Connection 4:

Connection-specific DNS Suffix . :
Autoconfiguration IP Address. . . : 169.254.211.217
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
 

A:Cannot Acquire Network Address

As it turns out, I "solved" the problem minutes after making this post. I turned on (yes, on) my firewall and after allowing the alerts that came up for the PC card, everything now works wonderfully.
 

2 more replies
Answer Match 40.74%

The other day my computer was connected to the internet via my wireless network with no problems. While I was messing around I lost connection. It has been 3 days since then and I cannot reconnect to my wireless network. My laptop works fine, as does my roommates desktop.

I am running windows XP and have been able to connect to the only non secure wireless network in my range, but with very low connectivity. The signal strength of said network is very low. When connecting to my network it seems to get stuck on the acquiring network address phase, while signal strength and that is very good.

I ran ipconfig/all through command prompt and this what I get:

Windows IP Configuration

Host Name . . . . . . . . . . . . : lafico
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Dynex Wireless G Enhanced Adapter
Physical Address. . . . . . . . . : 00-14-A5-D3-48-F8
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 0.0.0.0
Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 255.255.255.255

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseud... Read more

A:Cannot Acquire Network Address

10 more replies
Answer Match 40.74%

I'm trying to get connected to Verizon DSL for the first time, I have a Dell Dimension running XP, I've gone through the install and can't get a connection. I have the icon in the task bar showing the two computers trying to connect, when I hold the mouse over it it says: "acquiring network address", but it never does. I was on the phone today with Verizon tech support, he tried everything he could think of: couldn't ping anything, tried setting manual ip addresses instead of automatic, tried connecting with USB instead of Ethernet, his final suggestion was that the nic is faulty, however this doesn't make sense to me since it didn't work through USB either. The computer can connect fine through my old dial up connection.
I tried the install with a second computer (Toshiba laptop) and it worked fine, so the problem is definitely something to do with the Dell. I don't have a screenshot or text file for ipconfig on the Dell, but I know that all of the addresses are 000.000.0.0 (or something like that).
Thanks in advance for any help.
 

A:Can't Acquire Network Address

Are you connecting directly to a modem or to a router/switch?
 

2 more replies
Answer Match 40.74%

spent 2 1/2 days on this .Will not Acuire Network address. cant get to the internet . it's a dell inspiron 9400 that i am fixin for a friend and i've got off and deleated about 218 virsuses mostly trojons. DHCP is on. clients is started. already did a winsock reset. uninstall/install drivers. um....seem to have tried everyting on forums. i have 3 others computers & more on network that work just fine through 8-port netgear switch and router i have.I believ it has been blocked by a virus

never seen 1 that looks like this.most ppl want an ipconfig /all so here it is:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Luke>IPCONFIG/ALL

Windows IP Configuration

Host Name . . . . . . . . . . . . : family
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection 4:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Cont
roller
Physical Address. . . . . . . . . : 00-15-C5-3D-7F-D8
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . : fe80::215:c5ff:fe3d:7fd8%7
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS S... Read more

A:can't acquire network address

6 more replies
Answer Match 40.74%

Hi i finally managed to get my copy of sacred 2 gold to load and now i cant get it to play as i get a screen where it says setup managers and then it says unable to acquire devices. ANy advice on what i can do?
 

More replies
Answer Match 40.74%

My computer is stuck on accruing network address, here is the story

My computer became infected with Win AntiVirus Pro a while ago and I was finally able to remove it using spy-bot and ad-aware. (I mention this since it seems to be the last thing I was doing before the problem started) Problem is the next day I was unable to connect to the internet.
I tired to repair the connection, however as soon as I clicked repair I was immediately advised “windows could not finish repairing the problem because the following action cannot be completed: renewing your IP address. For assistance, contact the person the manages your network.”
I did contact my ISP and was unable to fix the problem after about 3 hours of troubleshooting. I tried running thorough the Ethernet port and a usb. I am convinced as is my ISP that it is a problem with the computer, not the service, as I can connect to the internet when I plug the modem into a different computer.
When I type in ipconfig /renew I get the message: An error occurred while renewing interface Local Area Connection: The RPC server is unavailable.
I have a dell dimension dim 4500 with windows xp(2002). The modem is connected directly to the computer.
I feel stuck between a rock and hard place since My computer tells me it’s a ISP problem and my ISP tells me it’s a computer problem.
Can anyone help?
 

A:Cannot acquire network address

"The RPC server is unavailable."

Server? Sure it wasn't "service"? If it was service: Control Panel - Administrative Tools - Services - the Remote Procedure Call (RPC) service should be started and its Startup Type should be 'Automatic.'
 

3 more replies
Answer Match 40.74%

Hello.

I just reinstalled Windows XP Home Edition on my laptop. I plugged the laptop to my router via ethernet and did all the necessary updates.

The problem is, I cannot connect to the router wirelessly. An IP address cannot be acquired, I think.

The ethernet connection is fine, and also other computers can connect wirelessly without an issue. I searched around this site and google, but I can't figure what to do.

Thank you in advance for your time!
 

A:Cannot Acquire an IP on a Wireless Network

did you install the driver for the network also the chipset drivers

make and model of the pc

can we see an
ipconfig /all
device manager

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------
------------------------------------------------------------------------
Device Manager
Post back the results in device manager
If you ... Read more

1 more replies
Answer Match 40.74%

I am working on a Dell Inspiron 8100 laptop for a friend. I upgraded his firmware to the lastest version from the Dell.com website. Now his 3Com 10/100 Mini PCI Ethernet card (built in to mboard) won't successfully acquire an ip address.

I have the laptop direct wired into my Linksys WRT54G router. Two other computers are successfully connected through the same router with no problems. I have included the Dell laptop into the correct workgroup name.

It successfully pings (127.0.0.1) but when I type "ipconfig" there is no ip address, no subnet mask, no default gateway.

If I type in "ipconfig /all" it shows a physical address, dhcp enabled and autoconfiguration enabled. No other info shows up.

I typed in "ipconfig /release" and it says it is already released.

When I type in "ipconfig /renew" it gives me an error message saying RPC server not available.

I have uninstalled the client and server from the NIC properties. I then deleted the NIC and rebooted twice. I still get the same results.

I upgraded the driver from the 3Com card with same results.

Any suggestions to correct this problem would be greatly appreciated.
 

A:Can't Acquire Network Address

7 more replies
Answer Match 40.74%

I have installed and ran scans with AVG Free 2012, as well as SuperAntiSpyware, and spybot search and destroy. All come back clean. However, AVG is blocking an attack by:

Trojan Horse BackDoor.Generic14.BSQM located in "Windows/system32/drivers/netbt.sys" Process ID: 1068

DHCP services fail to start with error 1075, and I am unable to acquire a network address resulting in no internet access. I am able to manually assign an ip address, but I need DHCP working so that I can connect wirelessly to other AP's. Simply put, I need this resolved ASAP. Many thanks for any and all assistance. Here are the requested logs:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 10:56:49 AM, on 11/22/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\PROGRA~1\AVG\AVG2012\avgrsx.exe
C:\Program Files\AVG\AVG2012\avgcsrvx.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Dell\DellDock\DockLogin.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\WLTRYSVC.EXE
C:\WINDOWS\System32\bcmwltry.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Elantech\ETDCtrl.exe
C:\WINDOWS\RTHDCPL.EXE
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\Persisten... Read more

A:Can not acquire network address.

16 more replies
Answer Match 40.74%

My old computer has been somewhat rendered unusable and I am in the process of getting a whole new pc.

I usually shop at PC Specialist for all my PC needs but I have encountered a small problem.

PC specialist no longer sells the ultimate edition of any of the Windows OSs; and I am in need of a windows seven ultimate os.

I took a search on ebay and amazon and I have concluded there are a lot of shady sales for this product.

I was wondering if there was a legit way to buy a retail version of windows seven ultimate?

(Side note, my last licence was an oem, so it can't be used on my new pc)

More replies
Answer Match 40.74%

Hi,

I reinstalled a driver for my Wirless LAN Mini PCI Adapter in my laptop yesterday and now I can't get an IP address to connect to my network. A long time ago someone changed a setting on this laptop to access a network in a school and when my gf brought it home we no longer could connect to our home network. I fear this same problem has came back now and I don't recall how it was fixed last time.

Anyway, put in the IP address, subnet and DNS #s this AM to try to manually connect and it shows up as connected now but the packets being sent are like 11-24 and received is 0. Can anyone help me get this working? Thanks!
 

A:Unable to Acquire IP Address

i had a similar problem because it was being blocked by my firewall: I put the IP address in the 'trusted' zone on my firewall and hey presto.

It may work. luck.
 

3 more replies
Answer Match 40.74%

About a week ago we had a virus on this computer. Ran malware and AVG and the computer worked fine. A few days after the virus was removed I could not get online or print to the printer that was hosted on this computer. It is a wired connection. Under network connection, it says "acquiring adress" but it never aqcuires one. I typed in the IP address manually and that allows me to get online but I cant see the other computers on the network and they cant see this computer. Any thoughts?

A:unable to acquire ip address

We cannot help you with malware removal here due to forum rules. Please click on the link for Virus/Malware Help in my signature and do as many of those steps as you can and skip those you can't and post there for more help. Once the security experts give you a clean bill of health;
Unplug the power plug to the Modem and the Router. Plug the power into just the Modem (unless you have a modem/router combo) When all the lights come up, plug in the power to the Router (unless combo of course)
Now Go to Start/Run and type inetcpl.cpl and press enter/Connections/LAN Settings. Make sure all the boxes are unchecked. Now go to Start/Run and type ncpa.cpl and press enter. Right click the Local Area connection/Properties scroll down to Internet Protocol (TCP-IP)/Properties. Make sure Obtain an IP Address and DNS Server Address Automatically are both checked. Now go to Start/Run and type CMD and press enter. IN the Command Prompt type ipconfig /release and press enter. the IP Address changes to 0.0.0.0 Now type ipconfig /flushdns and press enter. Now type ipconfig /renew. Now type ipconfig /all. You should have a new IP address try it again. If you still cannot connect please include the text output of your ipconfig /all in your next post

11 more replies
Answer Match 40.74%

Hello thanks for taking the time to help. Just yesterday out of nowhere my computer was unable to connect to the internet. I assume it is not a router issue since other computers can access the internet with no issue. Combined with abruptly slow startup on the PC, I figured I should send in the logs and have someone check it out. Thanks for your help!

(I tried to attach the Attach and Ark txt files but it said they were too big to attach. Let me know if you need them)

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:18:11 PM, on 9/11/2012
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\WLTRYSVC.EXE
C:\WINDOWS\System32\bcmwltry.exe
C:\Program Files\Alwil Software\Avast5\AvastSvc.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\WLTRAY.exe
C:\Program Files\Citrix\ICA Client\concentr.exe
C:\Program Files\Microsoft Office\Office12\GrooveMonitor.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Documents and Settings\G... Read more

A:Cannot Acquire Network Address

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps.===Please download MiniToolBox to Desktop and run it.Check mark the following boxes:Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logClick Go and copy/paste the log (Result.txt) into your next post.Note: When using "Reset FF Proxy Settings" option Firefox should be closed.===Please download Farbar Service Scanner and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action centerWindows UpdateWindows DefenderPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.Please post the logs for my review.

9 more replies
Answer Match 40.74%

I bring my laptop to work every day. I have no problem automatically logging onto the network and using the internet and the wireless printer at work. However, when I come home it will give me a strong signal of my wireless network BUT my internet connection is stuck on "acquiring network address" and always fails to log me on. I try repairing my network connection and that doesn't work either. In order to connect to the internet I have to go to the wireless router and modem and unplug everything, wait a minute, and plug everything back in before it finally connects me to the internet. I recently added a network key (in order to secure my network). I was also messing around with the windows firewall and I must have changed one of my settings either there or on my router because ever since then I have not been able to automatically connect here at home AND it my laptop doesn't see my wireless printer either. This is really frustrating me. I don't want to have to go through the trouble of disconnecting my router every day in order to use the internet at home. PLEASE HELP! I use Linksys wrk54g and have windows XP, and IE v.74G WRK54GWRK54G
 

A:cannot acquire network address

6 more replies
Answer Match 40.74%

I have just changed my internet provider to orange I have a Dell Latitude D520 and cannot get connected to the internet the message I get is acquiring IP address, when I look at the settings it has no ip address what can I do
 

A:My laptop cannot acquire ip address

7 more replies
Answer Match 40.74%

Came down to my brothers in California.....tried connecting my laptop to his wire less but cannot get an IP....keeps giving me Cannot acquire network address.

I am connected wirelessly at home using a cable modem and a Linksys router.....my brother has dsl and a netgear router.....what am I doing wrong ??
 

A:Cannot acquire network address

Start, Run, CMD to open a command prompt:

Type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.
 

1 more replies
Answer Match 40.74%

i have no connection and it keeps trying to acquire a network address

A:cannot acquire network address

Welcome aboard Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.

1 more replies
Answer Match 40.74%

I searched around the internet and have come up with nothing.

A few nights ago there was a real bad thunderstorm and afterwards my computer and xbox 360 were not connecting to the internet. I have a desktop that is connected to my house's LAN through a cable. After checking out a number of different things I have come to believe it is definatly the computer and Xbox which are suffering from some sort of problem. My mom's laptop (which I am on right now) has no problem connecting wirelessly or with a cable. I have moved my computer down to the office and plugged it in with a working cable and it will not connect.

The computer will say that a cable is unplugged, try to connect, will not be able to acquire a network address, then the icon will switch to a yellow warning sign and say there is little to no connectivity. I ran a loop to test the network card and it tested ok (4 returns). This is really stumping me. Any help is much appreciated.
 

A:Can not acquire network address

13 more replies
Answer Match 40.74%

i am trying to connect my laptop to the internet and it keeps hanging on acquiring network address. most of the time i can fix these slite problems but this one has me stumped. i recently installed norton AV on my laptop and theat is when it all went down hill. i am unable to connect weather the laptop in directly pluged into the router or i am trying wirelessly it is frustrating please help.

A:cannot acquire a network address

If you right click on the connection and choose Repair, are you able to get a network address?

Sometimes a repair is required even though you are choosing the network directly.

Try the repair and let me know if that works for you.

10 more replies
Answer Match 40.74%

Ok, so I'm trying to fix my sister's laptop (emachine d620), and all I have left to do is get the internet working. It's stuck on "Renewing IP Address/Acquiring Netwrok Address" and SOMETIMES will go to limited or no connectivity. Repairing the connects yields the same results. I went into a cmd, but when I type 'ipconfig' it looks like this:

C:\Documents and Settings\Administrator.EXPERIENCE>ipconfig
'ipconfig' is not recognized as an internal or external command, operable program or batch file.

Help, plz? :/

Thank you!
 

A:Can't acquire network address... :(

Not sure if this is your problem but: Open Control panel> open Network Connections>right clik Local area connection>Lclik properties> highlight internet protocol>Lclik properties>check obtain auto
Ben
 

2 more replies
Answer Match 40.74%

asus m2n-mx se plus mobo
cant renew ip address
tried ipconfig
no internet
4+ computers working fine on router
cable good
reinstald ethernet drivers
help cant figure this one out
help
 

A:Can't acquire network address

Try power cycling your router
 

7 more replies
Answer Match 40.74%

Trying to add a laptop to an existing wireless network. Recognizes the network but cannot retreive an ip address. Can someone walk me through this process?

Also, really annoying: the f4nct56n 2ey 5s 6verr5d5ng the standard 2eyb6ard sett5ngs. H6w d6 get th5s bac2 t6 n6r0a3+ Get it?
 

A:cannot acquire wireless network

7 more replies
Answer Match 40.74%

I have recently had dsl installed in my house and i can use the dsl for xbox live but yet i cannot use it to connect my computer to the internet. It sits there saying acquiring network address for hours and does nothing. I need HELP!

A:Cannot acquire network address

have you tried swappin the network cables?

3 more replies