Tech Problem Aggregator

Solved: Wireless Configuration Error Message

Q: Solved: Wireless Configuration Error Message

OS: Windows 7 Home Premium -- Service Pack 1, 64-bit
Browser: IE 9
Computer: Dell Studio 1745

I am receiving an error message window titled "Wireless Configuration" with the following message:

"OLE initialization failed. Make sure that the OLE libraries are the correct version."

I cannot find anything about updating OLE libraries in Windows 7. I have not installed any new software, and my computer is barely 2 years old. I do not find it a coinicidence that my free Dell tech support expired last month, and now I'm having issues with the Dell wireless card.

Thanks for any help you could provide.

A: Solved: Wireless Configuration Error Message

8 more replies
Answer Match 65.94%

hi i have wireless configuration message coming up all the time i followed a link on this site for wisefixer i brought it but it hasnt got rid of the error message i need help its driving me crazy because i cant use my computer
 

A:wireless configuration message

Perhaps you could supply the make and model of your machine and the exact error message you are getting.
 

1 more replies
Answer Match 61.74%

Recently I've been getting a popup message at boot: Error detected retrieving default

configuration DEFAULT.ALC. I close the window and everything seems to run fine.
Anyone know what that's about or how to fix it??

Machine: Esystems
OS: WindowsXP Home
RAM: 1.5GB
Drive: 120GB
 

More replies
Answer Match 60.9%

The rest fo the error message says- "Failed to read configuration file. Please contact system administrator"
I have just R and R'd Firefox and I'm still getting this error message. It won't run now and now I see just how horrible IE is in XP,since I'm forced to use it now....sob
Please Help!!

A:Firefox won't startup-Error message says "Configuration error"

Only an idea!!!!  Not sure but it may be the newer FF may not run well on XP, you could experiment by down loading and older version.
 
Just checked I may be right check the link below!
 
https://support.mozilla.org/en-US/kb/firefox-no-longer-works-some-versions-windows-xp

7 more replies
Answer Match 60.9%

hi,

also, each time i start the computer, there is the following message - error failed to load branding configuration -. couldn't find anything on the web. What could it be ?

THANK YOU

A:error message branding configuration

You really shouldn't duplicate post, if not for the integrity of the forum, then so that everyone knows what you are being told and you will not be pulled down two or more pathways to a fix, yano. but no foul, no harm, just acting on your behalf (and SF's)

Mike

1 more replies
Answer Match 60.9%

I istalled a new printer/copier/scanner recently and all seems to have gone smoothly. But now whenever I boot the system, load a cd, launch my dsl connection, etc, I get the message "please wait while Windows configures the printer" and/or ""searching for installed components" or something similar. Can anybody help? Thanks!
 

A:printer configuration error message

7 more replies
Answer Match 60.9%

Hi, I have a friend who is trying to hook up a wireless router. I don't know much about routers at all so I am posting this here in hope that someone can help him out. Below is his message/description of what is happening. Any help is greatly appreciated. thanks...dano2

=============================================
Here's what I'm trying to do:
I have a Linksys wireless router (model #WRT120N) and I want to attach it to a Dell desktop computer and eventually a HP wireless printer. I have broadband/cable Internet access from Comcast Cable.
When I run the Setup CD-ROM and it checks for a connection I get an error message stating "No wire adapter detected". Due to that I can't proceed further. This is the first time I've setup a router, so I'm a little lost.
 

A:Solved: Getting a Linksys Wireless Router error message..

I will move to networking forum

Whats the exact Model of the Modem supplied by Comcast - it may be they have supplied a router and you are trying to connect a router to a router
Assuming its just a modem
you should not need the setup CD
connect a PC to the WRT120N
connect the modem to the internet socket
switch modem on - allow to settle - check all the lights and post back here
switch Router on - allow to settle - check all the lights and post back here
Switch on the PC
Now you should have a connection to internet on the PC
IF so we can then move to setting up the wireless section
 

2 more replies
Answer Match 60.06%

I get an error message when I open Itunes. It says "Itunes has detected a problem with audio/video configuration..." and that the audio video may not play correctly.

I have uploaded some cd's to Itunes and I have noticed the sound has skips in it.

Also, my daughter wanted to open some pictures from a disc but the disc wouldn't work. I took the disc to work and opened the pictures fine.

I have a Dell Dimension 8200 running XP. I do not have any other problems with the machine.

Are there diagnostic programs that I might try to correct this problem, or do I need to replace the cd drive?

McChuck
 

More replies
Answer Match 60.06%

This a.m. I was greeted by this System Configuration Utility message popup:

You have used the System Configuration Utility to make changes to the way Windows starts.

The System Configuration Utility is currently in Diagnostic or Selective Startup mode, causing this message to be displayed and the Utility to run every time Windows starts.

Choose the Normal Startup mode on the General tab to start Windows normally and undo the changes you made using the system Configuration Utility.
-----------------------------------------------------------

Yesterday I used the system configuration utility to untick a program in the Startup menu. Is that why I am getting this message now?

If I follow the directions and select the Normal Startup option, will all the services that I have painstakingly turned off over time start running on startup again? Or will it just load the one application it changed?

Could I restore the registry from a few days ago instead? And, if I do that, will the tracking cookies I finally got rid of by setting them to be deleted at start-up reappear?

Another question I have is, what is the utility used for, if not to make changes? Is it just to look at? What good is it then?

HP Pavilion - Pentium(R) 4CPU
160GB HDD 512 MB RAM
Windows XP SP2 Home
 

A:System Configuration Utility Error Message

12 more replies
Answer Match 59.64%

hi!

I got on Outlook this message:

One or more rules could not be uploaded to Exchange server and have
been deactiveated. This could be because some of the parameters are not supported
or there is insufficient space to store all of your rules.

any ideas?
thx!!

gicio
 

More replies
Answer Match 59.22%

Immediately after upgrading to IE8, a Wireless Configuration error message began appearing and will not close even when I reboot my Acer Aspire 5600. It reads as follows:

Incorrect MFC Dll version installed on system, minimum requirement is MFC SP4 dll.

I located an answer from Dell for their computers in these Forums, but can't find anything here for Acer. Any help would be appreciated.

Laurie

A:Wireless Configuration Error

do you have a service running called Broadcom Wireless LAN Tray Service
control panel> admin tools> servive

3 more replies
Answer Match 58.8%

Windows update was interrupted yesterday and now I'm getting all kinds of errors.

1-SVChost.exe application error Instruction at 0x745f2780 referenced memory a 0x00000000 memory could not be "read". This happens when I try to re update windows and when I boot computer and perodically while searching the internet.

2-No audio device. My sound is only working when the error message pops up.

3-Generic host process for Win32 services has encountered probelm needs to close.
(this occurs when I boot up computer)

4-unable to create C:/document and settings/jamie/application data/BVRP Software Netwaiting Moth log txt.file (this happened when I booted computer

I called dell as the system is only 4 months old, and i have warranty, however they informed me that for software related issues they would charge 264.00!!!

You could say that I'm rethinking my purchase choice.

Any help would be greatly appreciated!

Thanks so much
 

A:SVC host.exe error message-windows update, configuration problem

did a system restore to a checkpoint on monday, when all was well. Fixed the sound problem, but still getting the error message about SVChost and the Win 32 one.
 

2 more replies
Answer Match 57.96%

running winxp

tried tweaking some startup stuff to cut down on what was running to help speed up my comp and deleted some unused programs,which i think must have had the dll file in it....

dunno what i did wrong as i thought i turned everything back to the way it was but im still getting this stupid error,again i am thinking the notification dll files were possibly in one of the old programs i deleted

"Notification dll
has not been registered program will not work correctly"

immediate upon bootup and starting to access my desktop i get that error

network connections is empty

i cannot drag and drop now either

i cannot access any wireless connection to get online with that laptop and download any fixes or anything

tried a few other fixes i found elsewhere,none worked and gave me this message when i tried

ethernet adapter wireless network connection 2:
media state........:media disconnected

ethernet adapter local area connection:
media state........:media disconnected

and if its relevant and helps solve it, as soon as i hit enter, i can get around on y desktop minus the toolbar,yet immediately it pops up not one but two of the same folders system32

and in the services section,it will not let me start alot of the various services that seem like they need to be running to access my wireless stuff

any help is appreciated,thanks
 

A:wireless configuration notification dll registry error

15 more replies
Answer Match 56.28%

I'm having a problem accessng the Wireless Zero Configuration in another computer. When I went to the windows website for help it said that there was a Computer Management i had to click after running devmgmt.msc.. The problem is that i couldn't find it. Any ideas on how? The computer is a DELL Inspron 700m
 

More replies
Answer Match 55.86%

Hello all, I'm having an issue with the Wireless Zero Configuration service

in tools>administrative services the service is set to "automatically" but never says "started" unless it is double clicked on and "start" is clicked

this means that starting it manually is required for some reason after every reboot I try even though it states it is set to automaticall

I checked the registry entry and it is set to automatically, I also uninstalled the intel proset driver incase there was a conflict....I'm unsure of what else to try, please advise

The computer I'm having this issue on is a Dell latitude D820 and the version of windows is XP Pro Service pack 2

please advise
 

A:Solved: Wireless Zero Configuration issue

7 more replies
Answer Match 55.86%

Hi there,

My laptop runs on a wireless network at home, but lately, the Wireless Zero Configuration Utility has been acting up. When my laptop becomes connected to the home network, the service itself will go from "Started", to "Stopping". So basically, using the Wireless Zero means that I can only stay online for a couple of seconds before the service resets itself to "Stopping", and back to "started". I'm not really sure what's happening, nor have I received any error codes or messages. All i know is, my Wireless Zero Configuration Utility is switching on and off. The only way I could get online, was to wait for the service to connect me to my network, and disable the service once i was connected, so that it wouldn't reset itself every 10 seconds. Any insight or advice would be greatly appreciated.

Thanks in advance.
 

A:Solved: Wireless Zero Configuration Resetting

13 more replies
Answer Match 55.02%

i have set it to start automatically but the service wont start unless i go to services and manually press start service it works fine but how do i get it to start automatically?
 

A:Solved: wireless zero configuration wont start?

Silly question but I'll ask it anyway
Did you click on OK or Apply after making the changes in Wireless Zero Configuration Properties?
 

3 more replies
Answer Match 55.02%

Can anyone tell me how to stop the "Use Windows to configure my wireless network settings" tickbox from unticking everytime I cold boot my Laptop. I have to go into Wireless Networks and retick the box each time to get my wireless connection to work.
Many thanks
 

A:Solved: Windows XP configuration of wireless connection

Control Panel - Administrative Tools - Services - scroll to Wireless Zero Configuration and check the Startup Type. It should be 'Automatic' for what you want.

If your wireless adapter's utility is launched at startup (and disables WZC) then stop it (remove it's shortcut icon from the Startup folder or use msconfig).
 

3 more replies
Answer Match 55.02%

Ok, so I've been beating my head over this one. And not only have I been beating my head but I've wasted several hours on it too.

The company that I work for purchased a few wireless units from Newegg. The model they chose was the TrendNET TEW-639GR model (you can find the user guide here.)

So here is what we are trying to do and what is keeping us from doing it.

These units work great if you just want to plug it in and connect to the internet. We plug a network cable from our master switch into the WAN port and then wireless works fine, or plugging into the LAN ports on the back works fine. However it assigns the default 192.168.10.100-200 range to anything that connects to them. Our company uses the 10.10.0.1 to 10.11.0.255 range. So while the internet works, other network functions do not; like opening a connection to our AS/400 or RDC.

I cannot for the life of me get this to work the way we want. If I tell the wireless unit to use the DHCP range of 10.10.0.80 to 10.10.0.100 it reboots and we cannot get back into the device to manage it and it will not allow anything connected to it to access the network or the internet at all. This, even though it assigns the IP to said devices just fine. It just will not work the way it should.

Perhaps I am missing something? If you guys can help me out I would appreciate it so much.

Please let me know if you need further information.

Thank you for looking at this message.

Matt Hall
 

A:Solved: TrendNET Wireless IP Configuration Problem

6 more replies
Answer Match 55.02%

Hi,

I have just bought a D-Link DP-G310 wireless print server and am having problems getting it to work the way I want. I want to be able to print wirelessly from my laptop i.e with neither the laptop or the print server connected by cables to my router.

I did not find the instructions that helpful but have managed to configure the print server so that it connects to my wireless network. The problem is that I can only print if the laptop is connected to my router by cable. If I disconnect the cable, the laptop will connect to the router (and the internet) but will not print. I can also only access the print servers config menu via the cable. If I am connected to the router via the cable, I do not have internet access following the tcp/ip configuration changes I made to be able to get to the print server

Do I need to do anything to the wireless tcp/ip configuration to get it to see the printer (not too sure what I am doing in this area!) Will any such changes interfere with internet access?

Thanks in advance for any help.

Dave.

I have Windows XP on the laptop
 

A:Solved: Wireless Print Sever Configuration

8 more replies
Answer Match 54.6%

After running a system update on a Acer Extensa 5620z running vista home basic serive pack 2 a popup appears saying "wireless configuration-notification dll has not been registered, program will not work correctly"

I cant seem to figure out whats casing it.I tried system restore but its still the same.From my research its an unregistered dll and it can be fixed if it is registered but i don't know what dll it is or how to register it if I did.

I have attached a link to a screen shot to and a link to the site on registration instructions.
If anything else is needed please let me know.
http://social.technet.microsoft.com...g/thread/265f4de3-31ac-4fe3-bee5-e75872656a6b

 

A:Solved: wireless configuration-notification dll has not been registered, program will

Still looking for help with this.
 

3 more replies
Answer Match 54.6%

Hello First time poster here.

I've got a Asus EEE PC 1005PE netbook with Windows 7 Starter Edition. In attempt to clear some memory space (foolishly I couldn't wait two days until a 2G memory stick arrives in mail..) I'd messed up with msconfig and services.msc.

I've followed a guide online to change some service's mode to disable/manual.. and when I restarted the computer the wireless stopped working! Windows troubleshooting gives me no solution. I connected to online using LAN cable and tried to set all the services back to default modes but obviously missed something because network still can't be detected. Seeing as it doesn't show other people's networks either which I usually see along with my own, I don't think it's the router's fault. Everything working perfectly until I changed the service modes and restarted the computer anyways.

Since I have no idea which information you might need to give solution I'm including some screenshots of my Windows' current services states, wireless modem properties, and Window Features(just in case).



Thanks in advance!
 

A:Solved: Wireless Detection Disabled After Service Configuration

6 more replies
Answer Match 54.18%

HI. I have been fighting with my computer for 2 days now. All other computers in my house can connect wirelessly just fine. The computer with the issues was just brought back from college and can't get any internet connection. It connects to the signal just fine, but there is no internet and when I run the diagnostics the problem of the wireless network connection does not have a valid IP address pops up. And it also says there is a problem with wireless adapter or access point. My only guess is that something is blocking it but i can't tell what. Everything else connects fine and gets internet. Juse the one desktop using the wireless adapter will not get internet. Here is the ipconfig /all results. Any helps is appreciated thanks.
C:\Users\Sam>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Sam-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR5BWB222 Wireless Network Adapte
r
Physical Address. . . . . . . . . : 74-E5-43-0F-03-6E
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5075:ff1f:6592:853c%14(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.133.60(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
De... Read more

A:Solved: Wireless Network Connection Doesn't have a valid IP configuration.

16 more replies
Answer Match 54.18%

hi i just bought a new laptop and i cant seem to connect to the internet using wireless or Ethernet cable. i looked over other posts on the net looking for a solution but none of them works... the error says
"wireless network connection doesn't have a valid ip configuration"

please help guys
 

A:Solved: wireless network connection doesn't have a valid ip configuration

10 more replies
Answer Match 54.18%

I'm trying to install a Netgear wireless card in my new computer , XP Pro, and I get a pop uthat says I need to disable the windows xp wireless network configuration utility. I click on trying to close the pop up and the computer keepd rebooting. I think there is a conflict with the new Netgear software wireless and the Windows XP software. How do I disable the Windows XP Wireless Network Configuration Utility?
Thanks
 

A:Solved: Need to Disable Windows Wireless Network Configuration Utility

Run services.msc and look for it in the Services list. Double click to access its properties ("Wireless Zero Configuration") and set the startup mode to disabled and reboot.
 

3 more replies
Answer Match 54.18%

Two days ago one of my laptops stopped accessing the internet even though it connects to the wireless router (BT Homehub3). Other laptops, Iphones, Xboxes etc still work fine on the same network.

Running Diagnose Connection Problems produces the following error message Wireless network connection doesn't have a valid IP configuration

Running the BT Homehub set up utility it connects to the hub but it fails to set up wireless connection saying that the wireless key is incorrect or there is another problem. It then suggests a wired connection which fails to connect (tried different ethernet cables and ports)

After googling for solutions I have tried the following suggestions without success

ipconfig /all

and the successfully pinging the resulting IP address, default gateway & DNS server

ipconfig /release

ipconfig /renew

After the renew prompt the following message appeared: unable to contact your DHCP server. Request has timed out.

In services.msc I disabled and restarted DHCP Client

I have also tried

netsh int ip reset reset.log

netsh winsock reset catalog

as suggested elsewhere on this forum, again without success.

I thought I had cracked it when I found a Microsoft Fix-it-for-me tool (MSfixit50199) but it made no difference.

Any suggestions gratefully received.

System info below:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU T4400 @ 2.20... Read more

A:Solved: Wireless network connection doesn't have a valid IP configuration

13 more replies
Answer Match 54.18%

Hi guys, I've got a bit of a problem here. See, sometimes the router has too many devices connected to it and the other people living with me don't understand this so they keep their iPhones, iPads, laptops, et cetera connected via WiFi even though I tell them to turn off the WiFi setting when they're not using it. So it kicks me off constantly, not sure why, but I don't mind too much.
Basically when I'm "connected" but not really connected I remotely reset the router so I don't have to walk upstairs all the time.

Anyway, I've reset it without troubles before. But did it tonight and now it's completely screwed up. I run a windows diagnostics test and it comes up with:
"Wireless network connection doesn't have a valid IP configuration."

Now I've been searching the internet from my iPhone to find solutions all night and came across this thread:
http://forums.techguy.org/networking/1019884-solved-wireless-network-connection-doesnt.html

I've tried doing the things suggested in there but it's not really working too well. Here's my ipconfig /all
Code:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : VAIO
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
... Read more

A:Solved: Wireless network connection doesn't have a valid IP configuration

16 more replies
Answer Match 54.18%

Components involved in network
Dell Dimension 3000 Tower OS Win XP SP 2
Dynex Wireless G Router
HP Laserjet 4050 TN
What I'm trying to do.

Get the wireless router to recognize the Laserjet and assign it an IP address though DCHP.
The laser jet was originally configured on a physical Net Gear Route, thus it has RJ45 ehternet connection. When I connect the laser jet, Dell PC and the Dynex Wireless Router. The wireless network works fine as far as a laptop accessing the network, BUT the router does not recognize the laserjet and does not assign it an ip address. The laser jet had an static address with its old configuration. How do I get the router's DHCP to recognize the laserjet and assigne it an IP address? Any ideas or ways to configure the Laserjet to accept an IP assignment or lease?
 

A:Solved: HP Laser Jet 4050 configuration with Dynex wireless G Router

14 more replies
Answer Match 53.34%

Hello
I have a new TL-WR740N router by TP-Link. I set up the network with a visible SSID and WPA2 password and I access the internet with no problem from my Windows 7 laptop.

My mom's laptop with Windows Vista is giving an error that I had never seen before (she has used several wireless networks before without any problems). The computer connects to the network and tells me to "Press the configuration button" on the router. The router doesn't have a configuration button. If I click "Next" it will say it "Could not get settings from TP-LINK TL-WR740N - Verify the device PIN (...)" When it first tells me to press the configuration button, I don't have to click next - there is an option that says "I can't find the configuration button, I want to enter a key or passphrase instead." So I click there and put the password. It connects to the network, but only locally. No internet.

I have tried turning the router off and back on (that used to solve a similar problem some time ago). If we plug the router to her laptop using that LAN cable, then she can use internet. I tried to set up the network a second time (the SSID, the password and stuff) using her computer instead of mine, but that didn't do anything.

Thank you very much in advance '=)
 

A:Solved: Connected to wireless network, but no internet (configuration button and devi

6 more replies
Answer Match 53.34%

Hi All.!
I'm new user in this community..
Here is the thing,
I'm trying to connect to the newly installed wifi router my dell laptop is connecting to that network but no internet access, my all other machines are working on the same net but dell inpiron 3521. after running a troubleshot i'm getting Error Detected: "Wireless Network Connection" doesn't have a valid IP configuration"...
I've read and tried the fixes, but nothing worked for me, even tried to find and disable the webroot client service but couldn't find it..! Please help if somebody have fixed this with an easy method.
 

A:Solved: Wireless Network Connection" doesn't have a valid IP configuration

16 more replies
Answer Match 53.34%

I have my main computer with the following setup

Windows Vista connected to the router then to the modem in Bridge Mode (so that I can use NAT1 with my PS3), thus internet works fine for both, my Main Comp (Desktop) using PPPoe and PS3 using a wireless connection between my router but also through PPPoe.

However, in terms of my secondary computer (Desktop), I have a USB Wireless Adapter, but I do not seem to be able to find the configuration for going on to the internet through the router but to use PPPoe.

The following are my products

Router - D-Link DIR-625
Adapter - D-Link USB Wireless Adapter DWL-G122
Modem - SpeedStream 5200

Thanks
 

A:Solved: Modem Bridge Mode + Router + USB Wireless Adapter Configuration

I'm a bit confused. If you're connecting PPPoE with two devices, that indicates you have two modems, which sure doesn't sound right. What are you really doing here?
 

3 more replies
Answer Match 52.08%

Hello

I was able to connect to the Internet a couple of weeks ago. Unfortunately, I am receiving the following message:

Connection status: Unknown
The dependency service or group failed to start.

1. I did an ipconfig to see if i was receiving an ip address from the router.. I am not.
2. I disable the windows firewall.
3. When I try to repair the connection i receive a message about: Network Diagnostics cannot run because the Diagnostics Policy Service is not running. So, I went to the service control manager and try to enable that service manually. I receive an error message with a code.

The wireless card is on and is able to see all the network available in my area. However, it will not connect to the Internet..

Any input will be appreciated.Thank you in advance,

Techbone.
 

A:Wireless error message. HELP!

6 more replies
Answer Match 51.66%

I keep getting this error: "Wireless Connection doesnt have a valid IP Configuration" and there is a little yellow triangle on the WIFI connection I am trying to connect to. This connection is my next door neighbors and I have FULL PERMISSION to be using it, so no issues there. My problem is that now it is not letting me connect to it. Another error I saw was something about conflicting IP's.

What can I do to fix this? My neighbor lets me use his wifi for school because Im a virtual school student overseas and I have a lot of homework online and am in need of high speed internet. I am behind on several on my assignments and there's only 2 weeks of school left. Please help me connect to the wifi, it would mean so much to me.

I am currently trying to download ubuntu because I know I wont have this issue on there but my current internet speed is SO SLOW its saying I need a whole day to download it and that's too long.

I have windows 7 home premium

Thank you

A:HELP: Error "Wireless Connection doesnt have a valid IP Configuration"

First things first, did your neighbor change anything with his configuration? If so, what changed?

Please follow this guide and report back:
"Wireless Network Connection doesn't have a valid IP - Microsoft Community

1 more replies
Answer Match 51.66%

My Father-in-Law brought over the computer we gave him for Christmas and said it was not working. I started it up and got this message "your system has detected a configuration error. Please report this error to customer care...blah blah" I tried a system recovery but it had no effect. I tried clearing the cmos and that had no effect either. I tried using the recovery cd's that I made for it and got a message saying the cd's were not for the correct model?!?!?! What is going on here?

PC Info:
HP Pavilion a430n
XP sp1

Any help would be appreciated, Thanks in advance

-Nate
 

A:Solved: Help with System Configuration Error

12 more replies
Answer Match 51.66%

I have a laptop that on my wireless school network would connect fine and automatically. The network is a guest network so it is unsecured. I recently had to reinstall the operating system on my laptop to fix several access rights errors and others (reinstalled Vista). After the reinstall I am having a lot of trouble accessing the internet on the school network. The network and sharing chart will occasionally show that I'm connected to the public network and it will also go all the way through to internet access but my pages wont load and I don't have connection (I use google chrome as my browser but thats not the issue).

I've tried:

-Pinging common websites, it comes back and tells me that I have entered the name wrong which is odd.
-Restarting my computer
-Restarting my laptops wireless adapter
-Checked wireless connections at my house and at other network in my computer engineering class, all of which give me full access to the internet.
-Check DNS information I get a DNS error from doing a diagnosis(this I may not have done right so more information would be great). The diagnosis says I can't connect to www.microsoft.com common dns server
-When it says I have internet and I go to a page I get a error about not being able to resolve the server
-Disabling DNS prefetching
-My own IP is pingable which is normal.
Hopefully I can get this fixed soon because several of my classes are online classes at school which will end up forcing me to do a bunch of ... Read more

A:Solved: A sort of DNS Configuration Error?

11 more replies
Answer Match 51.24%

Hi,
I just got a new computer with Vista. I connected my D-Link Wireless G USB adapter to it and whenever I restart, I get an error message that says, The procedure entry point aspSearchINterface could not be located in the dynamic link library wlanapi.dll. I've also gotten two other ones that say AirPlusCFG.exe - Entry Point Not Found and WZCSLDR2.exe-Entry Point Not Found. Can anyone help me with understanding and fixing this in easy to understand language? lol Thanks ahead of time for any help.

A:Wireless error message on Vista

I received the same message and contacted D-Link. Their solution of using the Vista Beta drivers hasn't worked. But you can find them on the dlink.com website under downloads if you want to try. My solution was to uninstall the D-Link Airplus Utility Program (which will uninstall the drivers also), restart the computer and then only install the drivers from the disk, not the Utility program. You shouldn't get the error messages anymore, but you won't have the Utility Program that never worked for me anyways.

16 more replies
Answer Match 51.24%

Made some changes in Windows and now receiving this error message:Exception GIFException in module aviWUSB54GC.dll at 000252AF.Have created a HiJackThis log file for review. Any help would be appreciated.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 2:28:50 PM, on 6/12/2009Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16827)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exeC:\WINDOWS\system32\brsvc01a.exeC:\WINDOWS\system32\brss01a.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\system32\bgsvcgen.exeC:\Program Files\Cisco Systems\VPN Client\cvpnd.exeC:\WINDOWS\eHome\ehRecvr.exeC:\WINDOWS\eHome\ehSched.exeC:\Program Files\Intel\Intel Application Accelerator\iaantmon.exeC:\Program Files\McAfee\SiteAdvisor\McSACore.exeC:\PROGRA~1\McAfee\MSC\mcmscsvc.exec:\program files\common files\mcafee\mna\mcnasvc.exec:\PROGRA~1\COMMON~1\mcafee\mcproxy... Read more

A:Error message from wireless card

1 check your services and see if anything that should be running has been disabled. (firewall )
do a search for a file on your computer named flec006

If the firewall and other services have been disabled, re enable them and reboot. If the services have been disabled again go to
malwarebytes.org and download this program. It is free.

save the file, boot to safe mode, and run the program. after running the program, reboot, if the file flec006 is there, delete it. go back to services and make sure everything that should be enabled is enabled.

firewall
CNG key isolation
DCOM service process launcher
Remote procedure call (RPC)
Windows Update

Go to device manager and view
show hidden devices
Devices by connection

look for native WIFI filter and make sure it is automatic and started under properties, driver
also look at NDIS System driver and NDIS Usermode I/O Protocol. set them to automatic and start them if they are not started.

This will not hellp if you simply have a bad .dll file. If that is the case, reinstall the software for your wireless card and look for the latest driver.
Replace the aviWusb54GC.dll file with aviWusb54Gv4.dll

1 more replies
Answer Match 51.24%

ok so I've been getting this message for a while now.



Link to a large version of the message
it's been a real problem, making my computer start slowly, and I haven't been able to figure out what's wrong! I could really use the help!
 

A:XP Error message (possibly to due with wireless?)

12 more replies
Answer Match 50.82%

Hello all,

I was wondering if there was any way to solve the Dell Plug & Play Configuration Error on startup. I've read that it has to do with the IRQ, the CMOS battery or maybe even a bad motherboard.

I've got a monitor/color problem. It's tinted green and it's dull. Could this be a symptom?

I'm pretty tech savvy but I don't know much about editing the BIOS.

Does anyone know if this can be fixed? I'm going to reformat the HD anyways. Do you think that will help?

Thanks in advance for any help you can offer.
~Mz
 

A:Solved: Plug & Play Configuration Error

Bump
 

1 more replies
Answer Match 50.82%

I'm getting these two error messages towards the end of the installation of Impulse:
1: Error Parsing
RegASM.exe Configuration Parser error
C:\Windows\Microsoft.NET\Framework|v2.0.50727\config\machine.config
Parser returned error 0xC00CE556

2: Error Parsing
Impulse.exe Configuration Parser error
C:\Windows\Microsoft.NET\Framework|v2.0.50727\config\machine.config
Parser returned error 0xC00CE556

I've already tried a clean install and a reinstall of .NET Framework. Please help, this program is essential. Already tried compatibility mode, too, with no effect.

A:[SOLVED] Configuration parser Error during and after install

Addendum: Stardock support says this is not a problem with Impulse itself, and the Microsoft support system hasn't been helpful. Need third-party support; namely, this tech forum.

3 more replies
Answer Match 50.82%

I have a PC with wireless and moved recently and when i tried to connect to my wireless moden the PC would connect but i would get error messages, i keep getting this error message: "Windows was unable to find a certificate to log you onto network". My PC was working fine prior to this so can someone tell me what to do about this? Thanks. -RC
 

A:Wireless Network Connection Error Message

7 more replies
Answer Match 50.82%

I am still struggling to log my 5 yr. old Dell SmartStep onto the net with a Linksys PC card and Linksys router. The latest theory is that Windows is blocking the connection. I get an error message that refers me to article ???? at microsoft.com, telling me I have to get WZC...
Laptop gets internet with ethernet/USB Belkin adapter connection to router, old PC hardwired to router and gets online no problem, friends have no problem logging on to wireless network here at the home, laptop was previously owned by a friend who never experienced problems with wireless connection. I have spent hours on the phone with my local ISP, Linksys, Dell, you name it.
Thanks-
Vuela
 

A:Window error message, no wireless connection

16 more replies
Answer Match 50.82%

I have a stock standard HP Probook 4530s that I've had since new, and all of a sudden in the last month it comes up with this error on bootup "This wireless module is not supported so has been disabled 702". I haven't changed a thing since I've owned this laptop so I'm using the wireless card HP put in. I can occcasionally get around it (restarting numerous times) but it's very frustrating, especially when I want to do something quickly and I have to plan the restart, disconnect the battery etc game. Is there a solution? I have been searching for a solution. From what I understand there's an error with the BIOS and the wireless card is not on the whitelist. Which is ridiculous given that this is what came with the laptop!!! Any ideas or suggestions? 

More replies
Answer Match 50.82%

I am trying to install my printer to my wireless network, but I keep getting an error message that I am not the administrator on this computer. This is my personal computer, so don't know why I would not be the administrator. I did set up a homegroup and add my printer and all my documents, but that doesn't seem to make a difference. Please help right away! Thanks.

A:Error message when installing wireless printer

Dont double click the installer to run it, instead right click it and choose "run as administrator"

9 more replies
Answer Match 50.82%

Greetings,
I am new to this so i apologize if this question was answered somewhere else but when I searched the forums I could not find a solution.
this is regarding a Compaq evo n620c laptop that says 'connected' to the wireless network but when we click on internet explorer we get an error that states 'cisco systems web authentication redirect'.
the laptop has a broadcom net extreme gigabyte wireless g notebook adapter. is there some way to remedy this or is something wrong with the computer or the network?
Thanks for any advice you can provide.
Have a nice day.
 

A:wireless error message on compaq laptop

Is this a home network? If it is, reset the modem and router by unplugging for roughly 30 seconds; plug them back in and try again.

If this is a business (employer, Starbucks, etc) then explain to your administrator that you can connect to the network, but you can't get to the internet.
 

2 more replies
Answer Match 50.4%

Hi Everyone,

I have System Restore enabled on my Windows 7 Computer however there are 0 bytes allocated to Restore Points -



When I attempt to allocate space I am met with the following -



I click OK and then...



I do have adequate space on my drive -



I have tried turning System Restore On & Off and this has not improved the situation.

Any advice will be greatly appreciated.

Kind Regards,

Davo

A:[SOLVED] Error with System Restore Configuration in Windows 7

You seem to be trying to keep restore points on a backup drive.
How the System Restore Utility Uses Drive Letters

4 more replies
Answer Match 50.4%

Hello all,

I had to perform a system restore on my netbook recently and since then I have been recieving error messages from HP Wireless Assistant. I thought this initially might be to do with Spyware so I have downloaded SpyBot and run the programme which found a few issues and dealt with them but the HP Wireless Assistant problem still occurs. I also have AVG Free edition and I have run this programme which had an exploit virus which it says it rectified.

The error is the following:

EventType : clr20r3 P1 : hpwamain.exe P2 : 3.5.9.1 P3 : 4a688586 P4 : mscorlib P5 : 2.0.0.0 P6 : 4889dc80 P7 : 1b2a P8 : c P9 : system.io.filenotfoundexception

I would like to get to the bottom of the problem and if anyone can help it would be really appreciated.

My Compaq Netbook runs Windows XP Home Edition, Version 2002.

Thanks,

A:HP Wireless Assistant Error Message Following System Restore

This is a valid program, but it is up to you whether or not you want it to run on startup.Whether or not you need to run this program on startup must be decided by you. If you feel that you want this program starting automatically so that you have it available as needed, then do not disable it. The following information is a brief description of what is known about this file. If you require further assistance for this file, feel free to ask about in the forums. Name: hpWirelessAssistant Filename: HPWAMain.exe Command: %ProgramFiles%\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe Description: Wireless application bundled with HP computers that allows you to control different settings on the computer's wireless devices such as Bluetooth and WLAN. File Location: %ProgramFiles%\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe Startup Type: This startup entry is started automatically from a Run, RunOnce, RunServices, or RunServicesOnce entry in the registry. HijackThis Category: O4 Entry Note: %ProgramFiles% refers to the Program Files folder. By default, this is C:\Program Files. From Bleeping Computers user information -It just seems like the install/.exe file was not placed back when you did the reinstall - Note: Any file can become infected -Do you use Wireless or wired internet ?? If wired it is not required -

4 more replies
Answer Match 50.4%

Dell laptop (purchased in 2007) with Windows XP and Office Pro 2003, Avast has been run, and a Spyware destroyer has been run.

This laptop got quite messed up with a virus(s) several months ago. I had someone work on it and they restored it and installed free Avast and a Spyware destroyer. Seems to run well, except when I try to access wireless. Works well wired and also works ok wireless, but I cannot CHANGE or SELECT a different wireless network or wireless source. It connects automatically to one in our neighborhood. When we first traveled with it after having it worked on is when we discovered we could not connect or select wireless and get this error message.

It gives the following error box:

Title: "Wireless Configuration"
It has the standard white X in red circle

Message:
The Wireless control application was unable to start
a subprocess. The target application was
"C:\WINDOWS\system32\rundll32.exe shell32.dll,Control_RunDLL C:\WINDOWS\System32\BCMWLCPL.CPL,,{030CD70D-6473-4630-8011-202DC0FF1260},1".

OK button at bottom
 error_message.png   10.2KB
  16 downloads

I think, because it is a Dell, that it is defaulted to a Dell wireless control application instead of the Windows one? I have a Dell laptop at work also, and I select wireless networks the same way: we turn the Wi-Fi button on and then double click the little icon in the quick launch task bar that looks like a bar graph... Read more

A:Getting Error Message when trying to select Dell wireless network

first thing i would try is to reinstall your drivers for your wireless. Or look for updated drivers. You can usually check the manufacturers homepage, Dell in your case, and get drivers for the product.

3 more replies
Answer Match 49.98%

Windows 7 x64 system installed last week. All has gone well until a while ago...Adobe Acrobat downloaded an update and installed it, then asked to restart the machine.

At restart Windows quit and offered to restart normally or to repair itself. I let it try to repair itself, but it repeatedly failed, with the error:

*Boot configuration is corrupt.
Result: Failed. Error code=0x490*

In addition, I noticed that windows apparently is not finding the boot drive...looking at the repair log I saw:

System Disk=\Device\Harddisk\Windows directory-\\?\GLOBAL ROOT\Device\Harddisk1\Partition2\Windows

Windows appears to be looking at the wrong disk...it's installed on a new drive with only one partition. Using the Command Prompt option in the repair window, I could not access the *real* drive "C" (Drive 0), only Drive 1, which has two partitions for D and E.

Hiren's Boot CD running NTFS4DOS does not see drive 0 at all and also shows Drive 1, Partition 1 as drive C. Hiren's mini-WinXP shows a drive C designated as "System Reserved" - and shows Drive 1 as drives D and E on its partitions 1 and 2 respectively.

Mini-WinXP shows the otherwise elusive disk 0 as disk F.

I could sure use some ideas for a fix...I didn't have many to begin with and by now I'm down to none! Thanks in advance, if anyone can help.
 

More replies
Answer Match 49.98%

I'm not sure whether this question belongs in a software forum or this one, but when I now attempt to open any of my files of saved pictures I'm getting the following message; "This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.'

What application is it referring to? I do not know what application is used to open up pictures, so I don't know what to attempt reinstalling to hopefully correct the problem.

Anyone have an idea of what this application is or how I could determine what it is?....or what this new problem may be?

Thanks...
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Phenom(tm) II X2 545 Processor, x86 Family 16 Model 4 Stepping 2
Processor Count: 2
RAM: 3070 Mb
Graphics Card: NVIDIA GeForce 7025 / NVIDIA nForce 630a, 512 Mb
Hard Drives: C: Total - 953859 MB, Free - 902752 MB;
Motherboard: Gigabyte Technology Co., Ltd., M68MT-D3, x.x,
Antivirus: Avast 6.0.1091
 

A:Solved: Error notice; Application failure because configuration is incorrect

9 more replies
Answer Match 49.56%

I turn on my Windows 98se laptop, log on, and theres an error message: TheIPHLPAPI.DLL file is linked to missing export NTDLL.DLL:Rtllpv6AddressToStringA. What is the cause of this and how can I fix it. It also says:C:\Program Files\NETGEAR\WG511v1\wlancfg5.exe
A device attatched to the system is not functioning. I have all the .dll, .vxd, .386 files that I could find, installed.
 

A:Error message about NETGEAR WG511v2 wireless network card help!!!

Reinstall the network drivers for the card to start. You can also try this Automated WINSOCK Fix all Windows Versions and see if that helps.

Does the machine work with a wired connection?
 

2 more replies
Answer Match 49.56%

I have a Netgear WN121T Wireless USB adaptor but it won't install. I have downloaded the latest firmware (version 5) and tried to install it but I get an error message saying 'Data is inavlid'. After searching forums I have attempted to change the permissions in the device manager and I have aldo deleted the contents of teh driver cache. Neither solutions have worked for me and I was wondering if anyone had any other suggestions?
 

A:'Data Is Invalid' Error message when installing wireless USB adaptor

general rule of thumb - if it ain't broke, don't fix it. If it was working fine prior to the firmware update, then you shouldn't have messed with it. I would try to go back to the defaults.
 

3 more replies
Answer Match 49.14%

Hello all. I'm running Windows 7 professional on an HP 4320s probook. I recently uninstalled some of the HP programs because I never used them (sorry can't remember which) and now I cant connect to the internet. I get the error message in the thread's title.
I've tried ipconfig/release and the fix that has netsh ip textlog in it and i've also disabled the IP helper. None of these have worked. I looked for webroot in services.msc but couldnt find it so i don't think that's the problem either.
Any ideas?
 

A:Solved: "Wireless Network Connection" doesn't have a valid IP configuration

7 more replies
Answer Match 48.72%

I accidentally uninstalled the Security Accounts Manager Service through a batch file containing the sc delete samss command. Ever since then I had these problems with WZC.

Problems:
1) The wireless list (View wireless network) is not showing no matter how i refresh it with wireless zero configuration. The service is indeed started already on my xp.
2) All the old preferred network lists are gone too and even if i add new one it won't show.
3) Somehow it still auto connects to the wireless point which i have been using (with and without WPA) even when the preferred network list is not showing up.

I am able to connect to the internet with the Belkin wireless network utility. I assume windows cannot use the preferred network list (user names and passwords) because SamSs is missing. If anyone knows how to reinstall this service or solve this problem, I would appreciate the advice.

More replies
Answer Match 47.46%

I have XP Pro on an IBM T42 laptop. Had significant trouble with trojans/malware recently, but believe I have cleaned and recovered.

Currently my wireless network at home is functioning OK. But when I go to "View Wireless Networks" it says that there are "No wireless networks in range." Also when I go to Advanced Settings, there is no data listed under "Preferred Networks."

I have two concerns. First I am wondering if there is still some residual effect from the malware that I should be concerned about. Second, when I travel I cannot search for available wireless networks because the utility always reports that none are available, even though some networks certainly are.

Thanks very much for any advice and help.
 

A:Solved: XP wireless network - no networks found message

11 more replies
Answer Match 47.46%

Hi:
Every time opening up Windows 7. .... a box of the message popping up in the middle of the screen, saying, ....

'Failed to run service'

After two or second later, connection is completed as seeing '5 bars' at the right bottom corner of Win. 7.

Afterward, upon clicking to open 'Home Page,' .... another message popping-up in the middle of the screen,

'Check online for a solution and close the Program'

Clicked 'OK' and a box of message disappeared and connection is very fast as if nothing is amiss.

My question is;
I think that 'Smart Wizard' or something that came with Netgear Adaptor doing this. It seems 'security reason' or its related, .... but I'm not sure.

How to get rid of those two annoying messages?

How to remedy to this issue?

Thanks for any help in advance.
 

A:Solved: How to get rid of Annoying Message after installed Netgear 300 Wireless USB A

For the first one try not using the Netgear wireless utility. Often in Windows 7 wireless will work fine w/o the adapter's special utility. If this adapter needs the Netgear utility, in case something went wrong during the install I suggest you uninstall it and then reinstall.
 

3 more replies
Answer Match 47.46%

I downloaded an upgrade of the Adobe Acrobat, but everytime I go into it a message comes up "You cannot currently view Adobe PDF files from within your web browser due to a configuration problem. Would you like Acrobat to fix the configuration?" I click yes and then I can view them. What is that all about? Everytime the message comes up and I would think if it was fixed the first time, it wouldn't have to be fixed again.
 

A:Adobe Acrobat Configuration Message

Hi Liz:

Take a look at <a href="http://libnt1.is.tcu.edu/www/ereserve/acrobat_problems.htm"> this </a> link. Particularly the second problem/solution listed.

Hope that helps!
 

1 more replies
Answer Match 47.46%

whenever i start up my PC, i get System Configuration Utility Message, despite checking the box saying i don't want the message displayed everytime

also i get a registry change denied message from spybot

i'm worried that i have malware of some sort

what do i do?

thanks in advance
 

A:System Configuration Utility Message

bump
 

1 more replies
Answer Match 47.46%

I've reset my Asus laptop and now every time I turn it on it comes up with:
"A configuration change was requested to clear this computer's TPM (Trusted Platform Module)
WARNING: Clearing erases information stored on the TPM. You will lose all created keys and access to data encrypted by these keys.
Press F12 or Volume Up to clear the TPM Press ESC or Volume Down to reject the change request and continue"

I don't know much about this so I'm too scared to press F12, if I do will it cause problems? Any help would be appreciated, many thanks.

More replies
Answer Match 47.46%

Hi Guys

i just made some changes to msconfig and made so that a few programs dont start automatically on startup, to speed up my computer a bit, but now when i start my computer it comes up with a message saying:

"you have used the system configuration utility to make changes to the way Windows starts.

the system configuration utility is currently in diagnostic or selective startup mode, causing this message to be displayed and the utility to run every time windows starts.

Choose the normal Startup mode on the general tab to start windows normally and undo the changes you made using the system configuration utility.

[]don't show this message or launch the system configuration utility when windows start:"

What do i do? because i don't want to revert back to my old settings, because it'll slow my computer down again, but then i don't know if i want my computer to be running in a funny mode. does anyone know what this means or what i should do?

Thanks heaps!

A:system configuration tool message, help!

Just check the box is all.

Any time you change something in MSCONFIG, you will get this message again.

BG

4 more replies
Answer Match 47.04%

Hi I don't know if anyone can help but I have been having problems with downloading the newest update. I keep getting this error message, the game itself keeps freezing on me also any help would be appreciated .
 

A:Solved: sims 3 error message updated error i/o operation failed

10 more replies
Answer Match 47.04%

Greetings,

I am in desperate need for some assistance. My laptop recently has been giving this message before reaching the desktop: "A disk read error occurred. Press ctrl+alt+del to restart. I have tried restarting multiple times (including manually restarting), but I ended up receiving the same error. My operating system is Windows XP.

What can I do to approach this problem? I would be very grateful for any assistance.

~Trav.~
 

A:Solved: Desperate need for assistance for error message: "A disk read error occurred.

16 more replies
Answer Match 47.04%

I have a simple wireless router at my house that works fine with my laptop and my wife's. I've been working on my inlaws laptop this past week getting it rid of some virus and spyware issues (with much help from these forums).

My network issue is this: each time I reboot the machine, I have to restart Wireless Zero Configuration. Otherwise, it won't find my wireless connection (I get that error when I try to choose a wireless network that says windows can't set up a wireless network).

This laptop used to be hooked to a Linksys Easy Advisor router deal at their house. I uninstalled that, but I'm thinking maybe there is an issue leftover from that?

I hope this gives enough info to get started looking at some solutions so that this will recognize wireless signals without having to reset the WZC each time.

Thanks!
 

A:help with wireless setup- wireless zero configuration

11 more replies
Answer Match 47.04%

everytime I go to get on the internet on my laptop, it doesn't detect anything. So, I have to manually go into Services and start the wireless zero configuration because otherwise the wireless networks tab doesn't show up under network connections for wireless. Then, once the tab shows up, I have to go into wireless networks and check the box that says "use windows to configure my wireless network settings." How can I fix my computer so I don't have to do this every single time I want to get online?

A:wireless zero configuration/wireless network help

In services make sure the Wireless Zero Configuration start up type is set to Automatic not Manual. It sounds like your wireless came with software that configures the wireless networks. You can either disable that software from managing wireless and let Windows manage the Wireless or uninstall it.

7 more replies
Answer Match 47.04%

I'm pretty new at posting so I'm not sure of the best way to do this. When I start to log on to the net, whether using IE or Firefox an error message having to do with "Google" occurs immediately. (I usually use my Google bar to go directly to the site I want.) I've taken a print screen so that you can see that message directly but don't know how I should get it to you. (I'm used to emailing such things --) As I proceed I get another message which I have also copied. This one starts with the words "Assertion Failed." If I continue I usually get a "script error" message, a copy of which I do not have at this time. If I tell the message that I will proceed with going to my chosen web site, the last several times the site has come up in multiplicity, most recently it appeared 16 times, one right after another, totally out of my control, (causing I believe Foxfire to crash), and then just a bit ago, using IE, the site I logged on to came up 7 times. I really have no idea what to do about this so I'm hoping that you can help me once again.
 

More replies
Answer Match 47.04%

Please help I get this error message at startup, not hurting just very annoying. It says,
C:\PROGRA~1\MYWEBS~1\bar\1.bin\MYSBAR.DLL

Thanks for any help, DB1
 

A:Solved: Error Message at start up RUNDLL error loading

7 more replies
Answer Match 47.04%

Hi!
I am trying to aggregate a new Test Log Configuration for my logs, but Message Analizer cannot see my .config file into the directory: C:\...\Microsoft Message Analyzer\OPNAndConfiguration\TextLogConfiguration\
what can I do? Thanks for all,
Regards.

David Alh

More replies
Answer Match 47.04%

When I start up my computer, I get a message at the log in screen that reads:
 The Configuration data for this product is corrupt. Contact your support personnel. Then it won't allow me to do anything from there.
I don't know much about computers but I have tried to manually repair the boot configuration data but that didn't work. Could anyone please help me with this!! Thanks
 

A:Configuration Data Corrupt Message on Welcome Screen

Can you boot into Safe Mode?
 
What is the make and model of this computer?

2 more replies
Answer Match 47.04%

Hey,

I've made some changes to my startup configuration in MSCONFIG.
(BTW, I'm running Windows Vista 32-bit on this computer, not my original rig)
But now, every time I start my computer, I get this message.

I always check the box for "never show this message again", but it doesn't work.

Plz help, thanks!

A:Constant System Configuration Message at Startup

Have you attempted resetting the configuration as suggested in the error message? What setting did you change in your msconfig?

9 more replies
Answer Match 46.62%

Hello ,

Im using access and I have a combo box and an unbound field that picked up the column 1 from a table. Im using On change event. .It seemed that everything is ok when i put the first field , the second ( unbound) field automatically populate the second column from the table. The problem is when i used a data which is not on the table a box came out and say (Runtime error '3314'. You must enter a value in the 'missing field)' field.

I would be very happy for the message but this is not a normal MSGBOX. Ithink if i say it correctly , this msg came from the vba codes and block everything because below the box it has this END and DEBUG. i think my users will freak out if they press DEBUG.

Why this message came out the way it is, the code that I have is as follows:
Private Sub Arrv_IATA_Code_Change()
Me.Arrival_Point.Value = Me.Arrv_IATA_Code.Column(1)

End Sub
There must be some code that i can add to display the alert message without coming from VBA.

Thanks
 

A:Solved: error message 'runtime error '3314'

You should check that there is something in the Column(1).
 

2 more replies
Answer Match 46.62%

Since April this year when booting up my computer I always get a BSOD with oxoooooooooo7e and eventually when I get to the windows repair screen it tells me a change in the computers configuration may have caused this problem but my custom built computers system restore doesn't go back to April.

A:BSOD startup problems and message change to configuration

Hi rogerthedodger ,
I'll ask for this post to be moved to the appropriate section, in the mean time follow BSOD posting instructions
linked below. (Don't open a new thread just post it here).
Blue Screen of Death (BSOD) Posting Instructions

9 more replies
Answer Match 46.2%

After several unsuccessful conversations with Comcast techs a friend of mine really needs help and I am totally at a loss as to how to help her. She keeps receiving the following error message and has know idea what it means and whether she may be losing some messages. The error message reads as follows: "Message rules did not forward or reply to 1 message because the message would have been sent to one of your accnts. Accnt. mail.comcast.net Server mail.comcast.net"

She has only the one email account under a single name, is running XP and uses OE almost exclusively for her email.

All help will be much appreciated. Thanks.
DufferGirl
 

A:Solved: Email Error Message: "Message rules..."

9 more replies
Answer Match 46.2%

Hello...

I read this thread with much interest as I am having the same problem. I have got the Linksys WAP v2.0 connected directly to a cable modem. I would like to use the good advice given above (hopefully it applies to me too). I am getting the same access violation error and cannot enable security on the wireless network.

When you said connect directly, do you mean connect my laptop to the WAP by ethernet cable and set up a network connection with the IP address you specified?

Apologies for ressurecting this old thread, if any of you have a few minutes to clarify it would be much appreciated.

Thanks so much

Jojo
 

A:Wireless Configuration

Yes, that's what JohnWill meant.

Joe
 

3 more replies
Answer Match 46.2%

Whenever I log off, the next time I get on I have to do this to get my internet to work:

1. Start
2. Run - %systemroot%\system32\services.msc /s
3. Wireless Zero Configuration
4. Start this service

The startup type for Wireless Zero Configuration is already on auto but I still have to start it manually. I have Windows XP Professional and also, I don't know if it will help, but my internet is Verizon Fios. Any help would be great.

Thanks
 

A:Wireless Zero Configuration

it may be your adater is switching it off
when you first boot
go into
control panel
admin tools
services

and look ad see what its status is

do you have the wireless adapter software running
please give details - make and models etc
are you runng XP Service Pack 2
 

1 more replies
Answer Match 46.2%

Hey Guys,

I have a Linksys Wireless G router. One desktop connected via ethernet and 2 wireless laptops. The desktop is configured to print to my local printer. My laptops can access the router fine and access the internet. Can I also have my wireless laptops print to this printer? I' m sure I would need to load the drivers for the printer but what steps should I take? Any help is appreciated. Thanks.
 

A:Wireless Configuration

I take it you are using Windows XP, in which case it is fairly simple
Firstly, on the computer directly connected to the printer, go to the control panel, into Printers and Faxes, and then right click on the printer. Click on sharing, and then slect "Share this printer".
hit ok, and then go onto your laptops.
On the laptops, go into the Priters and Faxes again, and click on "Add a Printer".
hit next, and then click on "add a network printer, or a printer attached to another computer"
Click on browse for a printer (should already be highlighted) and click next.
It will search for all the printers on the network, and then simply select the one you wish to add.
A security warning box might pop up at this stage, simply hot yes to install the drivers.
and you're set! Just set that printer to your default printer.
 

2 more replies
Answer Match 46.2%

I use the DWA-552 Linksys wireless card on my PC. I would like to create either a bridge (which seems complicated) to my RNX-N100 USB Wireless dongle. The reason being, I am going to use the RNX to get access to the internet for my Blu-Ray player (BD-C5500T). I have looked everywhere and cannot find any info on the setup. The other way is to connect the PC to my T.V. as my integrated card has an HDMI port and bridge the wireless connection with the integrated wired connection (if that is possible) so i can gain internet access to my Blu-Ray player. I have tried to configure with my player and no-go. It works fine when i configure the RNX on my PC though.
 

A:Wireless configuration

10 more replies
Answer Match 46.2%

Hi,

I have just upgraded from Windows Vista to Windows 7 recently but currently I'm face with a problem.

After connecting with the wireless net at home, I have no internet access. It says "Wireless network connection doesn't have a valid IP configuration".

I read on websites that I should change the TCP/IPv6 and TCP/IPv4 to automatically acquiring IP address and DNS server address, but to no avail. I tried using the CMD but don't really understand how the IPCONFIG/ALL and IPCONFIG/FLUSHDNS work. I also tried changing the last 3 digits of the IP address to a higher number but also to no avail.

Done all that I could do, but I still can't access to internet though I could connect to the wireless.

Can anyone help? Your effort is much appreciated. =)

A:Wireless IP Configuration

  
Quote: Originally Posted by NotITSavvy


Hi,

I have just upgraded from Windows Vista to Windows 7 recently but currently I'm face with a problem.

After connecting with the wireless net at home, I have no internet access. It says "Wireless network connection doesn't have a valid IP configuration".

I read on websites that I should change the TCP/IPv6 and TCP/IPv4 to automatically acquiring IP address and DNS server address, but to no avail. I tried using the CMD but don't really understand how the IPCONFIG/ALL and IPCONFIG/FLUSHDNS work. I also tried changing the last 3 digits of the IP address to a higher number but also to no avail.

Done all that I could do, but I still can't access to internet though I could connect to the wireless.

Can anyone help? Your effort is much appreciated. =)


Hi and welcome

couple of things to try
Are you using a firewall or antivirus? disable them to test
use the ipconfigs like this first ipconfig /flushdns then ipconfig/renew
in cmd type ping and the routers ip

let us know results

Ken J

9 more replies
Answer Match 46.2%

Hello.

Everytime I shut down my Dell Inspiron laptop, Windows' Wireless Zero Configuration service shuts down. So, everytime I start the computer, I have to restart the service, go into Wireless Network Connection Properties and reclick "Use Windows to configure my wireless network settings" to be able to access the internet. Is there a way to make sure WZC stays on permanently? When I hit START on the activity, I'm not given the option to hit APPLY.

Thanks.
 

A:Wireless Zero Configuration

You should be able to go into WZC and select to connect to your network, then UNCHECK "Use Windows to configure my wireless network settings". That will prevent Windows from trying to connect to any other network but your own.

Edit - sorry I didn't see the other part of the problem. Go to start, run and type services.msc. Scroll down to Wireless Zero Configuration and make sure startup type is set to Automatic.
 

2 more replies
Answer Match 46.2%

Everytime I run the computer I have to start WZC, any ideas why it is shutting off when I shut the computer down

A:Wireless Zero Configuration

Hello scatty

My first thought is are you also running a utility that came with your wireless network card?

Some systems like Dell have their own utilities for managing wireless.

.

1 more replies
Answer Match 46.2%

I seem to have the problem where my desktop wireless connection disconnects shortly after booting up. I have a belkin 54g wireless network card and belkin ADSL modem with built-in router, also a centrino laptop on my small home network system. The laptop connection works fine but to reconnect my desktop I have to stop the wireless zero configuration and then repair the wireless connection. Is there any way I can stop losing the connection ? I'm new to home networking and muddled through setting it up. It now all works fine except for the above problem which is more of a nuisance than anything else. Please help.
 

More replies
Answer Match 46.2%

My new dell inspiron 1520 laptop is having a few problems. The computer cannot connect to wireless networks. It picks up and shows that it is able to pick them up...but it cannot connect to any of them. And these connections are unsecured - so there should be no problem. I have another Dell laptop and a desktop that get on these networks and other networks with out a problem. Please keep in mind the connections are unsecured and contain no mac filtering. I have called Dell 3 times. Each time we have had to continue the call later... It has become very frustrating having to call and never having any results. This is how it happens: Turn the computer on It automatically connects to an unsecured connection It shows in the task bar that it is picking up the signal and "connected" But then it says that it has none or limited connectivity. I just want to be able to get online! Please help if you can! Thanks, Mallory
 

A:wireless configuration

6 more replies
Answer Match 46.2%

Hello, I want to create a batch file to do the following.

1. Start the "wireless zero configuration" by typing the following in a command prompt:
net start "wireless zero configuration"

2. Disable and enable my wireless nic card.

Can this be done? I have to do this almost everytime I turn on my computer, so I thought creating a batch file to do this will make things easier. I appreciate all the help anyone is willing to offer.

I posted this in the wrong forum. Should have been XP forum Sorry!
 

A:Wireless Zero Configuration

closing duplicate files
continue here
http://forums.techguy.org/windows-xp/1056561-wireless-zero-configuration.html#post8378278
 

1 more replies
Answer Match 46.2%

I am trying to setup a wireless network between my 2 XP cpmputers #1 has a Linksys wireless router conected to the modem and #2 has a wired and a Linksys wireless adaptor. The wired adaptor connects ok but I'm having trouble configuring the wireless adaptor, it's recognized by windows ok but when I try to create a new connection and click on VIEW AVAILABLE WIRELESS NETWORKS it always shows the old connection which doesn't work nothing I do seems to add another profile. Any help will be appreciated.

Bob
 

More replies
Answer Match 46.2%

Prior to hard drive crash I was successfully using Speedtouch 121g wireless card for months. It connected smoothly on startup.
Since reinstalling everything onto new hard drive I need to go through these steps every time I reboot in order to achieve wireless connection:
>Start
>Control Panel
> Administrative Tools
> Services
> Wireless Zero configuration
> Start
> Control Panel
> Network Connections
> Wireless Network > right click > properties
> Wireless Neworks (middle tab)
> Tick box ?allow windows to connect.....? OK
> Right click on wireless connection and choose repair.

I have WZC set to automatic but still I need to restart it manually when I reboot. Can anybody help please? Also I am using XP SP3 (prior to hard drive crash I was on SP2 - could that have anything to do with it?). My anti-virus is AVG.

Thanks

Irene

More replies
Answer Match 46.2%

I cannot go to Wireless Zero Configuration. It is not on my computer. I have XP Home. It was on my computer and could click on it. Now it is gone. When I click on "View other wireless connections" there are not any of them.

I read your answer on your blog and it did not work for me.

My error message says to I have another wireless network. I don't know what it is.

Thanks,

Myrna

A:Wireless Zero Configuration

and welcome to the Forum

Have you gone into Services and set Wireless Zero Configuration to automatic and started it?

3 more replies
Answer Match 46.2%

I just reformatted this laptop by re installing XP. I know for a fact it has all the necessary hardware to connect to the internet. However, I can't seem to connect to anything. When I open Network Connections, there is no wireless option, there is only a 1394 Microsoft Connection. Plugging into an ethernet connection has no effect. I'm not entirely sure what I need to do to fix this.

Thanks
 

A:XP Wireless Configuration

You need to install the necessary hardware drivers. The laptop manufacturer's website should have these available.
 

2 more replies
Answer Match 46.2%

I have followed the steps indicated to set the Wireless Zero Configuration to auto start up. The problem is it won't stay on and we have to type into run net start wzcsvc everytime. Any suggestions

A:Wireless Zero Configuration

This article may be of interest in resolving the WZC issue Fixing Wireless Zero Config Service - MajorGeeks Support Forums but have you checked to see if anything else could be conflicting by doing a clean boot How to configure Windows XP to start in a "clean boot" state and then checking to see if WZC remains started ?

1 more replies
Answer Match 46.2%

incorrect mfc Dll versins installed on system, gateway, how can I fix?

A:wireless configuration

You have to give us a lot more information. From what I can understand you are trying to configure your Wireless, but there is a missing .dll file.
Please click on this link and provide this information in your next post: Pre-posting Requirements - for both Wired and Wireless Connectivity Issues

2 more replies
Answer Match 46.2%

First posting:

Hello to all:

I am using WinXP Pro SP2. I installed a Linksys USB Wireless Adapter
(WUSB54GS) using the latest drivers (12-20-04)and used Wireless
Zero Configuration to set up the network. I have the network listed in
my "Preferred network" list and all is working fine.

The problem is that if I select"View Wireless Networks" in the "Available networks:" none
are listed. Even if I do a refresh under the "Refresh networks list" it
seraches and them says "No wireless networks found inrange".

I have an "Excellent" signal strength at 54mbps.

I had a Linksysy PCI card in initially (WMP54G) which worked as well as
the new adapter and always showed the available networks before.

Thanks,

CTRX

A:Wireless Zero Configuration

Is your wireless router set to broadcast its ssid (which you do not want it to do)

4 more replies
Answer Match 46.2%

having just setup my wireless network it seems everytime i connect using the laptop i have to go into administrative tools / services and set the wireless zero configuration to 'start' to get online.

I keep setting this to automatic but it doesnt seem to be working how can i get round this?
 

A:wireless zero configuration

6 more replies
Answer Match 45.78%

I am getting an error message when I open up my musicmatch jukebox application. Here is what it says: Runtime Error!
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
What do I do?
 

A:Solved: Error Message: Runtime Error!

16 more replies