Tech Problem Aggregator

Solved: can't find netgear wireless router

Q: Solved: can't find netgear wireless router

I am currently visiting a family in France who have a Netgear router (DG834G), but my Dell laptop can 't see it. All my drivers are up to date.

A: Solved: can't find netgear wireless router

12 more replies
Answer Match 85.68%

Heres my dilemna, I have installed a netgear wireless router for me (Win2000) and a usb wireless nic card for another pc in the house, to share my internet connection. The router seems to be configured correctly, i have a cable internet connection so my router is configured for dhcp to get ip's from the cable connection my pc runs flawlessly, i also have inplace the necessary wireless security. But my issue is the other (Win98) wireless workstation, it can see my SSID on the network and my connection is reading at 65% but it doesnt seem to see the router i have the worstation configured for dhcp from the router but for some reason they dont see eachother I dont understand why? if i run ipcofig on the win98 pc i get a apipa address instead of a dhcp ip address that my router should be pushing out just like it does for my pc??? I think im missing a major step here but i cant see it...
 

A:Solved: Regarding Netgear Wireless Router and Netgear USB Wireless nic card...

12 more replies
Answer Match 78.12%

I just got a NetGear Range Max Wireless G Router off ebay and am trying to install. Aside from the router all I have is the adapter and some instructions to reset the username and password. How do I set it up? I already looked up the default username and password. Now I need to know what to do next. I am using my other Router from Cox at the moment so I can look this up. I tried plugging in the phone ethernet cable and the adapter cable to computer and router. Then I went to use internet and there was an error message saying something like cannot display page. I typed in website http://www.routerlogin.com and I kept getting error message. How can I reset the previous user name and password if I can't get internet connection? Everything turns on correctly including the router. Maybe there is a simple step that I have forgotten. Anyone got any ideas?
 

A:Solved: Netgear Wireless Router

9 more replies
Answer Match 77.28%

Hello everyone,

I just bought my parents a Netgear WGR614v10 wireless router for Christmas. I'm trying to set up a wireless network and make a wired connection from the router to their Dell Dimension 2400 desktop running Windows XP SP3. Internet access is provided by NetZero using a 2Wire DSL modem. Without the router connected, the wired Internet connection with the Dell desktop works fine.

I went through the procedure correctly to set up the wireless router but there is no Internet access. So I plugged the router directly to the desktop NIC and tried a "ping" command to 192.168.1.1. I received four "Destination host unreachable" responses.

An "ipconfig /all" shows (with direct Ethernet connection between NIC and router port 1):

Windows IP Configuration

Host Name . . . . . . . . . . . : Ruzan01
Primary Dns Suffix. . . . . . . :
Node Type . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . : No
WINS Proxy Enabled. . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix. :
Description . . . . . . . . . . : Broadcom 440x 10/100 Integrated Controller
Physical Address. . . . . . . . : 00-0F-1F-98-62-05
Dhcp Enabled. . . . . . . . . . : Yes
Autoconfiguration Enabled . . . : Yes
Autoconfiguration IP Address. . : 169.254.194.184
Subnet Mask . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . :

Some other info:
1. I tested the router by connecting it via Ethernet cable to my laptop ... Read more

A:Solved: NETGEAR wireless router not working

169.254.194.184Click to expand...

That IP means windows has assihgned the IP as it could not find the DHCP service from the router - lets see the services - see below - see if dhcp and other service are running
maybe a firewall blocking - has the machine ever had norton installed - if so use norton removal tool to remove - this often blocks access , and gives various strange results ie email and updates work but browsing wont - so would not surprise me that a modem works but router wont , as you get different IP range from modem

Norton Removal Tool
http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN

with the PC connected by cable - try safemode with networking
as the pc starts keep tapping F8 a menu appears - choose
safemode with networking see if that works ok

1. I tested the router by connecting it via Ethernet cable to my laptop (a different computer running Windows XP). I could ping the and access the configuration page no problem (so router is OK).Click to expand...

Do you get internet access all OK
post back an ipconfig /all from your working PC - make sure we know its yours

also post back a device manager screen shot from the faulty PC
------------------------------------------------------------------------
{Device Manager}
Post back the results in device manager
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Start > control Panel {Vista set to clas... Read more

3 more replies
Answer Match 77.28%

Hello,

I have a Netgear Wireless N-300 Router and I'm able to get on the internet on my computer that is hardwired into the router, but the wireless feature does not seem to work. I cannot get wifi on my iPhone, my netbook my iPad, or my laptop. All devices tell me i'm connected to the router, but I am not able to update any pages or connect to the internet. it's very frustrating, as Netgear will only help you if you spend $40/month on tech support and I've done all the firmware updates and have tried everything I can think of. Has anyone else had this problem? All of the lights on the router tell me everything seems to be working fine. And my phone tells me that I have a strong wireless connection, but nothing works. Very frustrated!!!

Thanks in advance for any help offered. PLEASE HELP!!

Thanks
Tracie
 

A:Solved: Netgear Wireless Router problems

9 more replies
Answer Match 76.44%

I have a new N600 Netgear DSL modem/router. I was able to install the internet connection but no the Wireless. It keeps asking me for a PIN number . They say it is on the device itself.
 

A:Solved: Cannot get new Netgear DSL Modem/Router connected to Wireless

yes, the pin number should be written on the label on the router

otherwise connect to the router by a cable and then you would need to loginto the router configuration pages and goto the wireless section where you can read the pin code

do you have the exact model N600 is generic for a few netgear models- again it will be written on the label on the router itself
 

1 more replies
Answer Match 76.44%

Hello,
Have a Netgear N150 wireless router. it had previously worked fine but now doesn't connect to by modem can anyone help? my operating system is Windows 7

I have another pc and ps3 that are connecting so its not the modem.
 

A:Solved: Netgear wireless router stopped working

8 more replies
Answer Match 76.44%

Hi I would like to password protect my Netgear WGT624v3 wireless router but I can not access the Netgear settings page. I have always had a problem with this. The Netgear WGT624v3 wireless router is connecting to a Linksys BEFSR41v3 router. This reason for this is because the modem and Linksys BEFSR41v3 router is in my basement and I am on the 3rd floor of the house. The wireless router will not work from my basement so I have it with me on the 3rd floor. When I try to access the settings page for the Netgear router using 192.168.1.1 it is sending me to the Linksys router settings page. Can anyone help me with this issue please? I am pretty sure my neighbors are using my wireless router and it's been slow the past couple of days. Thanks!
 

A:Solved: Securing a Netgear WGT624v3 wireless router

7 more replies
Answer Match 76.44%

I have a netgear WGT624 v3 Wireless G router. I run linux, and recently I started noticing that anytime I tried to download a large file (like a deb file which is similar to a setup.exe in some ways) would be corrupted. Running md5sum would confirm that each download attempt would be corrupted differently every time.

I ruled out the laptop by bypassing the router and going strait to the cable modem and with that connection I had zero errors. Otherwise, connecting to the router wirelessly causes problems (and this has been confirmed via a laptop, a PC and an iPhone which has also experienced download problems with installing apps).

The router is currently running the latest available firmware and it's been running this version for at least a year with no issues up until a couple days ago.

I've attempted to reset the router to it's factory defaults and work my way back up to a wireless WPA2 connection from scratch, but it didn't solve anything. Even disabling encryption entirely still produces the same problem. Some downloads just locks up for minutes before resuming and ultimately to no good end as the download is still corrupt.

So, does this sound like a hardware problem? Think it might be possible to fix it somehow? Perhaps blowing dust out of it maybe? Probably worth a shot but I've never heard of anyone doing that before.

Any other suggestions? Would it be worthwhile to attempt to reinstall the firmware? Or even revert to an older version to s... Read more

A:Solved: My Netgear Wireless G Router is starting to flake out. What can I do?

7 more replies
Answer Match 76.44%

After a few frustrating hours trying to figure out why my new HP couldn't see my Netgear WGT624v2, I conntect hardwire, downloaded the windows updates and ... still coundn't find my router. I tried the WGT624v3 and it did not work. Couldn't find a driver on the netgear site. Do I have to buy a new rounter?!? This makes no sense to me.

Jim
 

A:Solved: Netgear wireless router not supported by Vista

7 more replies
Answer Match 75.6%

I am a noob at networking. i wanted to know if i could setup a netgear wireless router to my ethernet cable that is coming out of the wall. is it as easy as plugging the cable coming out of the wall into the internet port on the router?
 

A:Solved: Setup a netgear wireless router on a company network

7 more replies
Answer Match 75.18%

Having problems connecting to NetGear and Belkin wireless routers, that require WEP password.
The wireless connection sees the router, full strength -5 bars, and asks for the password. After I give it twice, it just sits there and does not connnect.

Tried running update driver, but latest one on sony website is the one I have - from 2005

Running XP Home ed, Service pack 2, up to date.

I have not installed SP3 because of possible conflicts with the AMD cpu chipset, and last time I did it crashed the entire system.

Any help appreacated
 

A:Solved: sony vaio VGN FS470/w wireless will not connect to wep netgear router

16 more replies
Answer Match 75.18%

Hi there,

I have a broadband connection with Virgin Media and I brought a Netgear Wireless G - Router WGR614 v9 which is connected up and works fine - or at least my vista desktop and iphone connects to it ok.

I have since brought a Dell Inspiron Mini 10 Netbook and I just can not connect wireless internet to the netbook. The netbook instead keeps connecting me to a BTOpenzone /BTFONE connection which one of the neighbours must have as its not mine, although even the BTOpenzone comes up low signal and even that doesn't give me an internet connection.

Also I tried login into my router login page so I can add a device using the MAC address like I had to do for my iPhone but I keep getting an error message MAC address invalid although i dont know if this is even required.

I have gone into the dell wireless wlan card utility thing and tried to remove the btopenzone signal but it keeps reattaching itself, i have also tried adding my netgear.

That comes up with connection status - authenticating and at the bottom client ipv6 address not availiable (dont know it that should read that)

I am going out of my mind now, been trying stuff for days - i dont know what else to do

Please help, many many thanks
Pretty please any advise is much appreciated. Thankyou for any help in advance
 

A:Solved: Dell Netbook Mini 10 won't conect to Wireless Netgear router

11 more replies
Answer Match 75.18%

Hi

Using a HP notebook with Vista basic and am unable to connect to the wireless network. The computer can pick up the router but will not connect. This is a connection in a flat but it is un-authenticated. At the moment I am connecting using 3G mobile internet.
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\bagseye>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : bagseye-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

PPP adapter 1.3G:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 1.3G
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 92.41.215.217(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 0.0.0.0
DNS Servers . . . . . . . . . . . : 217.171.132.1
217.171.135.1
Primary WINS Server . . . . . . . : 10.11.12.13
Secondary WINS Server . . . . . . : 10.11.12.14
NetBIOS over Tcpip. . . . . . . . : Disabled

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR5007 802.11b/g WiFi Adapter
Physical Address. . . . . . . . . : 00-24-2B-17-C1-C3
DHCP Enabled. . . . . . . . .... Read more

A:Solved: Netgear DG834PN wireless router not connecting on Vista basic

8 more replies
Answer Match 72.24%

So here is my case:

SETUP:

Verizon's Westell 6100:
Modem/Router, provides 1 incoming address (provided by VZ) and provides 1 internal address (192.168.1.1).

Netgear Wireless Router WGT624 v4:
Wireless Router, accepts 192.168.1.1 and provides 10.0.0.X wired and wirelessly.

Problem:
Although Verizon's Router indicates that it is on Bridge mode, the damn thing isnt. I thought the main concept of bridging was to become practically invisible and automatically reroute all traffic to the next device, which is what I want.
I want to ultimately use the Netgear device to set all my rules and settings, instead, I have to do it on both.
For instance, Xbox Live is not working 100% properly. I can only play video games without being able to join specific games, or perform any in-game video/voice chat.

I have tried NATing the device. No luck.
I have also tried setting the Netgear device as a Wireless Base Station. Either way, I just would like to have my network ignore 1 device, and have the second one invisibly reroute all the access.

Is that possible? Could you please help?

Thanks to all!
 

A:Netgear Wireless Router and Westell Modem + Router = Routed Bridge failure

Well, since the "modem" is supplying a private IP address, it's obvious that it's not in bridge mode, that can only happen with a NAT layer, aka a router.

Try this solution to configure it for bridge mode, direct from Verizon: http://www22.verizon.com/residentialhelp/highspeed/networking/setup/questionsthree/123756.htm
 

3 more replies
Answer Match 72.24%

I have been trying to find a way to connect, forward the signal, recieve the signal from my Verizon Fios wireless router up to my WGT624 V3 Netgear router.

Is there a way that I can modify my wirless port on my Netgear to recieve a signal wirelessly from my Verizon Wireless router?

My Neighbor did it once with another wireless router, but he can not remember how he did it. I am thinking it had something to do with the Firmware.

If anyone can help me with this that would be great.

I'm basically trying to push the wireless signal from my Verizon router in my basement, up to my wireless Netgear router which is recieving the signal on the main level so that I can plug my wired (non wireless) laptop into the ethernet port which is receiving wireless signal from the Verizon router in the basement in order to gain access to the internet.

Can this be done with the equipment listed above and or some additional firmware and configuration?

Thank you for all your assistance on this in advance.

MCAMPOS526
 

More replies
Answer Match 72.24%

Hi all,

I am new to TechSpot. Actually, I need some help setting up my wireless network at home. currently, I am using Dlink 502T DSL router for internet and trying to connect the Dlink router to Netgear wireless router WGR614 for wirelss internet connection to other PC's. Could anybody please tell me how to connect these routers. I am trying to connect Dlink with netgear but i am unable to configure the same. When i use Dlink router directly with the PC, my internet works fine but when i try to use netgear inbetween Dlink router and a PC, my internet stops working. Please suggest. I want to distribute internet to my other computer thru netgear wireless router. please help...

ndhingra
http://www.techspot.com/vb/images/icons/icon5.gif
 

A:how to configure Dlink ADSL router and Netgear Wireless router for internet distrib

Ndhingra said:



Hi all,

I am new to TechSpot. Actually, I need some help setting up my wireless network at home. currently, I am using Dlink 502T DSL router for internet and trying to connect the Dlink router to Netgear wireless router WGR614 for wirelss internet connection to other PC's. Could anybody please tell me how to connect these routers. I am trying to connect Dlink with netgear but i am unable to configure the same. When i use Dlink router directly with the PC, my internet works fine but when i try to use netgear inbetween Dlink router and a PC, my internet stops working. Please suggest. I want to distribute internet to my other computer thru netgear wireless router. please help...

ndhingra
http://www.techspot.com/vb/images/icons/icon5.gifClick to expand...


The easiest way is to run the CD that should have come with the Router, if you havent got it then you will have to configure it manually.

Full instructions can be found on the netgear website here.

Regards
 

1 more replies
Answer Match 72.24%

I have Qwest/CenturyLink DSL, and recently replaced the Actiontec M1000 modem which crapped out after 5 years of service. Replaced it with a Netgear DM111PSP v2 router/modem. Now I cannot get either of my two routers, the Linksys WRT54G or WRT160N V2 to broadcast wireless internet. I've spent the most time on the WRT160N. It will broadcast a wireless signal, but devices that attempt to connect to the internet time out while "obtaining IP address". BTW, I just happen to have two wireless routers on hand, I only need one to work.

I can get internet through the hard wire connection. I have the Netgear modem hooked up to the "internet" port of the WRT160N router, and the computer is connected to one of the four ethernet ports on the back of the router. I can access both router and modem setup pages using this setup. The Netgear modem is set up for DHCP server, PPPoA encapsulation, and gets its DNS address dynamically from the ISP. The WRT160N is also set up for automatic DHCP configuration. These are the settings given by running each set up wizard, and this has set me up for some DHCP conflicts.

I think that setting up a dual modem/router in transparent bridging mode (PPPoE) in theory turns off the DHCP, allowing the WRT160N to handle DHCP, but I have no luck even getting my hard-wired internet connection to work if I switch from PPPoA to PPPoE mode. Even if I cut the WRT160N out of the loop and connect the computer direct to the DM111PSP. No internet,... Read more

A:Connecting WRT160N v2 wireless router to Netgear DM111PSP router/modem

Netgear DM111PSP v2 router/modem.Click to expand...

ifthis is a router then you need to connect the other two routers using their LAN inputs NOT the WAN/internet - unless you set the DM111PSP to bridge mode
you may have already covered the below - but check
see here
------------------------------------------------------------------------

Connecting two (or more) SOHO broadband routers together

Connecting two (or more) SOHO broadband routers together
From a John Will Post

http://library.techguy.org/wiki/Connecting_two_SOHO_broadband_routers_together

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

C... Read more

1 more replies
Answer Match 71.82%

Hello, I specifically want a wireless-router with an on/off switch for the WiFi itself. Ideally a switch that will stay in postion until you press it again.

Apart from that the router needs to have all round good performance. Price isnt too much of an issue.

I'd really appreicate any help. Thank you.
 

A:Solved: Need Help to Find A Wireless Router with Wireless on/off Switch

8 more replies
Answer Match 70.98%

After a series of computer and network failures, mostly due to electrical storms and electrical contractors, I decided to upgrade my old Netgear router to a new Netgear Wireless-N router.

I have used Network Magic to manage my networked computers and when I decided to upgrade NM, the new version didn't support my old router. So, it seemed like an all over upgrade/update was in order.

What should have been a simple process-- turn everything off, disconnect the old router, replace it with the new router, and go through the set up process (cable modem on, then router on, etc.) has turned into a mystery.

I used the Netgear startup wizard, followed step by step (more than once) and each time I got to the last part of the process, it stalled saying "No Router Found."
It was only after several unsuccessful attempts, that I decided to open my control panel and check things out. Network Connections showed my status as "connected," so I opened my browser and found that I am able to connect to the internet.

What I have not been able to do is to set up my network, network security, etc. I tried to initiate Network Magic for set up, with the same results-- "no router found."

Anyone know what I have going on here? Am I only connected through the LAN connection, perhaps?

To make matters further complicated, my phone service is Vonage, VOIP, and the Vonage device has failed, so I'm waiting for the new one to arrive...can... Read more

A:Replacing Netgear wireless router - router not found

let's establish what IS working and then deal with Network Macgic

I assume these simple tests all work:
ping the router address using the ip address
nslookup www.google.com. returns an ip address (notice the period after .com)
ping www.google.com works
and tracert www.google.com works also
and your browser has no problems (just the be sure)

Here is what I see; I assume you have everything EXCEPT the router



Uploaded with ImageShack.us
 

16 more replies
Answer Match 70.56%

I just got a linksys wrt54g router. I have 2 XP machines. first one is wired ethernet which is working fine (as usual lol). and the second one is a laptop with a 802.11b wireless card. the laptop cannot seem to find the router. I go into the wireless setup wizard and it says "no wireless connection in range". I have the same SSID in the laptop as it has in the router. I have tried the wireless security disabled, wep, and wpa - no luck. also tried changing the wireless channels around. the laptop is only 6 foot away from the router. HELP! thanks
 

A:Solved: wireless cant find router

16 more replies
Answer Match 70.56%

(Sorry, I just edited this because I realized the title said Wireless Router, it's actually a gateway. Can't fix it.)

I have a Netgear CGD24G Wireless Gateway and a Gateway MA8 laptop with after-market Windows 7 (Vista got a virus, went ahead and upgraded.)

Now, when I download 100 MB files on my Xbox 360 (Which is wired to the modem) it will be downloaded in a couple minutes, or less. The other computers in my house (There are plenty, and even more that come and go.) get a blazing internet connection, and most of them are wireless. Now this computer, which had an extremely quick connection as well all of a sudden dropped off, while the rest of the computers remain fast.

I've gone to Speedtest.net before and after this occurred and my speed before was around 12 mb/s, and one time around 4 AM was even upward of 25 mb/s, all of these tests were performed multiple times on different server locations.

I JUST did the speedtest, and it came back with .4 mb/s, and the UL speed was 2.0. I honestly can't remember what I averaged with it prior to the problem, but it was definitely higher as well.

This started happening a little less than a week ago, and I've downloaded/changed nothing major with the computer, and have mainly used it for light browsing, and an occasional download.

Also, this is mainly just a hobby fix. I have a long enough cable to wire the computer straight to the gateway, so I really don't want to buy new hardware or anything of t... Read more

A:Only one computer with slow wireless connection, Netgear CGD24G Wireless Router

7 more replies
Answer Match 69.72%

I have a NetGear router and I noticed that it updated the other day. I would like to know what was changed or added but I am having a heck of a time finding any release notes. Does anybody know where I can find them?

A:Where can I find Netgear router update release notes?

Hi My Friend, if you know the model Nos. you can use this page.

2 more replies
Answer Match 69.72%

I was using my laptop and everything was fine. All of a sudden I lost connection to the internet, "cant find server." After trying to reconnect to my named router a couple of time and turning my computer on a and off with no success I reset the moden and Linksys router.

Now I can find a bunch of routers in my neighborhood, but my named router is gone. I do find a Linksys with a great signal, so I am assuming this is mine, but cant tell. Would resetting the router cause it to lose its "identity" and security settings? Sorry for sounding so naive, but my brother set up the network for me.

Thanks for any help, Delta
 

A:Solved: My laptop cant find my wireless router???

16 more replies
Answer Match 69.72%

I've just bought a wireless router, the kind that's to be used with the existing modem.

I connected the wireless router to the modem, then the PC to the router.

All lights on both router and modem appear to be fuctioning well.

However, when I try to run the installation, I get a message that says the computer can't find the router.

I unplugged the router and went back to the modem and found I couldn't connect to the internet. In Network connections, TCP props, my DNS settings had been wiped. I replaced them and connected to the internet without problems.

So I tried again with the router, and found exactly the same problem. Again, when returning to the modem alone, the settngs had to be replaced.

Can anyone tell me what the problem is? Could the router be incompatible with the modem?
 

A:Solved: New Wireless router - computer can't find it

16 more replies
Answer Match 69.3%

Hello friends!

I'm having a bit of trouble tonight trying to connect to my wireless router. Here are the specifics-

Router: Linksys Wireless B
OS: Windows 7
Wireless Adapter: Netgear Wireless G

I used the Netgear installation disc and ran the setup wizard. I was able to connect easily initially, and firefox opened to my google homepage. I tried a simple google search and it went offline. The taskbar icon shows "connections available" and when opened and prompted to connect to the found network, it was "unable to connect". I opened the Netgear set up wizard and it just keeps scanning the channels and never connects. Any suggestions??

Thanks!
 

A:Netgear Wireless G Adapter to Linksys Wireless B Router

10 more replies
Answer Match 69.3%

i have a netgear wgr614 v7 is there any way i can set it up th receive a wireless signal instead of transmit i essentially want to turn it into an external wireless card for a desktop computer any ideas?
 

A:Using a Netgear wireless router to recieve a wireless signal

Nope, not with the standard firmware. That model operates only in infrastructure mode.
 

3 more replies
Answer Match 68.46%

I have xp operating system and a netgear wgr614 version 9. The check light is not on and it will not find my dns. I have tried turning off the computer, then resetting the router, turning of the router, turning of the modem. WAIT. Turn on the modem, wait, turn on the router, (waited five minutes this time) then turned on the computer. Once loaded I went to 192.168.1.1, logged in and started running the on board setup software and it froze and then I wasn't even able to get back into 192.168.1.1. It wouldn't even go back to the login screen. before I logged in i did get the ipconfig/all report and was as follows
Windows IP Configuration
Host Name . . . . . . . . . . . . : YOUR-318033DC17
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection 3:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
Physical Address. . . . . . . . . : 00-40-CA-99-89-D2
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
Lease Obtained. . . . . . . . . . : Thursday, November 19, 2009 7:52:22
PM
Lease Expires . . . . . . . . . . ... Read more

A:Please help (Netgear Wireless Router)

10 more replies
Answer Match 68.46%

Hi guys,

I bought a brand-new Netgear wireless modem router recently. I encountered some problems when I used it.

1. When I plug in the power of modem router, I notice the light of wireless is off. I think it should be light. Is it something wrong with the router?

2. My laptop obtains the IP & DSN automatically (which means DHCP), but I can't log in 192.168.0.1 which is default address. OK, after that, I change my laptop ip address to static ip address, say 192.168.0.10, then I can log in 192.168.0.1.

Dose anybody know the problems? Any help would welcome.
 

A:Netgear wireless router

6 more replies
Answer Match 68.46%

Hi,

I'm only a beginner with wireless routers but my problem is;
Just purchased new desk top PC loaded with windows vista, it's great, set up old PC in sons room loaded with windows xp home brought a NETGEAR router for the vista pc and a usb plug in adaptor for the old pc again netgear. The plug in adapter has caused windows xp to stop booting up opening a window with RtlGina2.dll as the cause. I have since found out it's a problem created by the usb adapter but how do i get rid of it?
Can anyone help? It does seem to be a fairly widespread problem so i'm hoping someone else has had the same problem.

Geoff
 

A:Netgear wireless router

See www.dougknox.com, Win XP Utilties, Fix Windows XP Logon.

This utility will reset the registry to use the standard Windows GINA DLL file. 3rd party utilities are not compatible with the Welcome Screen and Fast User Switching.
 

1 more replies
Answer Match 68.46%

Hello,

Using a Webstar Cable Modem, & Netgear Wireless Router on Windows XP.

Connecting an Ethernet cable to the router worked ok, had access to the Internet with no problems.

Trying to run wireless was the problem. No wireless networks found.

The Tick light was off on the router, i power cycled the equipment, i reset the router, i applied the wireless settings manually, but still no wireless networks were found. It is a laptop so i checked to see if it had a wireless switch, which it did and is turned on, but still no networks could be found & this "Tick" light was still off. The router didn't seem to be able to broadcast a signal?

Is the Tick light important, i'm not to familiar with the Netgears light sequence, must this be on for a signal to be broadcast, or does it come on when there is an active wireless connection?

Any other ideas of how i would get this online?

Thank you,

C.Skyco
 

A:Netgear Wireless Router

6 more replies
Answer Match 68.46%

I have a new wireless ip camera that works great and I can view it from any computer in my home after entering user name and password.
However, when trying to access from outside my home the ip address with the port number at the end doesn't even ask for a user name and password. It just comes up with a can't connect error.
I have a Netgear router and can get inside to see connected devices and I'm guessing somewhere in here I need to give a permission to view this camera outside my home network.
Any help would be greatly appreciated.
 

A:NetGear router and wireless IP help

... when trying to access from outside my home ...Click to expand...

Nearby using your Wi-Fi, or over the internet? If the latter you have to use your public IP address and have to set your router to forward the needed port(s) to the camera.
 

3 more replies
Answer Match 68.46%

hiya, i'm pretty new to this so please bear with me.

i've just bought my son a wireless n 300 router and usb adapter kit (made by netgear) model wnb2100 on the box or wnr2000 on the router.

i've followed the instructions that come supplied and have the following connections:

1. cable from internet socket of router to internet socket on modem.
2. cable from pc to ethernet socket 1 on router.

i get so far thru install wizard and then error pops up telling me no router detected.

help, been at this for 3 days and am really starting to lose it.

if you need any more info (bout what i'm doing wrong) just contact me.

ta in advance
 

A:netgear wireless router help

15 more replies
Answer Match 68.46%

I have a netgear wireless router and 2 computers ,one with a pci wireless card installed.
The computer without the wireless card connects fine to the internet,the one with the wireless card shows it is connected but nothing will connect.The web pages will not come up.
Both computers have XP Home.
I have followed the network install guide .
 

A:netgear wireless router

6 more replies
Answer Match 68.46%

New guy!!! I have a netgear router WNR2000 That I stopped the wireless signal. I know it was a simple thing at first but now I wand to use the wirell signal. I don't have a clue how to re activate it and it is driving me nuts. this router is running my Gateway and my wifes computer and a vonage Machine for our phone system.
Any help will be appreciated. Bob S.
 

A:Netgear wireless router

with one of the PC connected by cable - log into the router and enable the wireless
enter your router version here
http://kb.netgear.com/app/
WNR2000
A list will appear with V1 or 2 or 3

then on documentation tab - you will see the user manual

You should be able to loginto the router by

You can connect to the wireless router by typing either of these URLs in the address field of your browser, and then pressing Enter:
• http://www.routerlogin.net
• http://www.routerlogin.com
If these URLs do not work, you must type the IP address of the router, for example, http://www.192.168.1.1

Enter admin for the router user name and your password (or the default, password)
 

1 more replies
Answer Match 68.04%

Yikes! I have 12 documents to print immediately and I can't see what I'm doing wrong.

I have a MacBook Pro laptop.

My printer is a Samsung 620ND Laser Printer.

Can someone walk me through this before my meltdown has a meltdown. The documents I have to print are to receive a job offer and I can't get the damn things printed!

Thanks,

Writergal/Dawn
 

More replies
Answer Match 68.04%

I recently had to reset my wireless router (NetGear WNR2000v4), and when everything came back up it had no wireless connectivity. The light on the router goes on, but i can't even see the network as in range on my phone. The router login page has a toggle for wireless radio on/off, it's set to off but when i check it back on and apply it reverts back to off, and the LED on the router also turns off.

I've also got notifications of a firmware upgrade available, but when i try to download/apply it i get a "firmware incorrect" error.

After going through all the usual steps (shutdown of computer, phone, power cycle and factory restore on the router), i found a boatload of threads out there from folks having the exact same symptoms, and eventually a supposed fix for the issue here: http://kb.netgear.com/app/answers/detail/a_id/27207

After downloading the fix tool and following the instructions, nothing seemed to happen. Where the fix says there should be files transferred in tfptd32, there was nothing there, and nothing changed about the way it's all acting. So now i guess i'm in need of a fix for the fix? I'm not altogether certain what this utility is or does to know how i might be able to make it work if it doesn't want to.

At this point i'm not sure if it's just broken and i need a new one, or if there's anything i can do to fix the fix, or if there's another solution out there. Any ideas?
 

More replies
Answer Match 67.62%

Recently, my desktop blue screened, and the cause of it was from outdated drivers on a NETGEAR wireless network adapter.

Does anyone know where I can find the latest drivers?

A:Where can I find the latest drivers for a NETGEAR Wireless

On Netgear's website.

2 more replies
Answer Match 67.62%

i installed the latest drivers from the netgear website (which says they are compatible with win7 64 and 32bit) and installed them just fine but when it tries to set up a network using the smart wizard it can never find my network. i have other pcs connected to the same network (using different adapters) so i cant understand why it doesnt work. please help me!!!

A:netgear rangemax wireless n usb (v2) cant find network

Have you tried using the 54GB option in the settings for that adaptor? The reviews aren't too good but it might work. It's only a 15 dollar adaptor so don't expect too much from it.

Of course there are plenty of USB wireless adaptors that work fine with Windows 7.

9 more replies
Answer Match 67.62%

Hello. I just bought a used Netgear wireless router. The product code is MR814v1. I plugged the power into it then an ethernet cable from the cable modem to the router. The power button is on and the internet light stays on for 5 seconds then blinks and turns off then the wireless light comes on. I am not sure what is wrong with it. I have tried different combinations of plugging in the wires but to no avail. I really need to get this working for my girlfriend. First I was at my house using it and the internet worked for about 10 minutes then just stopped. I have no clue what the deal is. I need some help.

-Mooney
 

A:Netgear Wireless Router Not Working

First step, reset the router to factory defaults. With power on the router, hold the reset button down for 15 seconds or more. See how it acts after that.

Of course, buying used equipment is sometimes a crapshoot, you may have simply purchased a defective router.
 

1 more replies
Answer Match 67.62%

I recently moved into a house that already had a netgear wireless router already installed and working. the first time i got onto the connection it worked fine and i could take my laptop up to my room and the internet worked fine. Now i can sometimes connect to the wireless connection when i am close to the router and never when i am up in my room. my Broadcom 802.11b/g WLAN says the connection is excellent or very good, but wont connect to the wireless. i have called HP and my compusa store where i bought my computer but they cant help and they suggest i send in the computer to be checked out by their technicians. can anyone help? i can usually fix my own computer problems but i cant seem to figure this out and am now using a ethernet cord plugged into the router to connect to the internet. thanks.
 

A:Netgear WPN824 wireless router

7 more replies
Answer Match 67.62%

I've recently moved in to a new apartment with a new roommate, and I've misplaced the disc I used to install the software (or driver?) for my wireless router. It's a Netgear Wireless-G router WGR614 v9. The computer has Windows Vista. I've been to the Netgear site, and all I can find there is firmware (and I'm not even sure what that is). Any ideas as to where to find the software would be great. Thanks!
 

A:Netgear Wireless Router Software

The software is just to help you setup the router, its not required. You can log into it manually and configure it: http://kb.netgear.com/app/answers/detail/a_id/239/kw/WGR614 v9 wizard/r_id/166
 

1 more replies
Answer Match 67.62%

I have a Linksys WRT54G router and a W311 Netgear Wireless NIC. My PC is running Windows XP Service Pack 1.

In the bottom right hand corner the wireless card appears as being connected. It tells me the signal strength is excellent and the mbps. But I my internet connection will not work. I have tried pinging the router and I get "request timed out". Are these two devices compatiable? Is there anything else I can try to get them to communicate?

Thanks.
 

A:Linksys Router and Netgear Wireless NIC

first, make sure that you have a valid IP, an invalid IP would be 169.254.x.x. secondly, right click on the connection icon and "view available wireless networks" make sure you are connecting to your router. XP will sometimes automatically make a connection to the first unsecured wireless network it finds, make sure you are connecting to the right SSID. Next, do you have WEP enabled, if so, do you have the key set up on your computer.
 

3 more replies
Answer Match 67.62%

I have had this router for some time - worked fine with Xp64 - now I've upgraded to Vista 64 Home, it will occasionally lock up.

By that I mean that I can sometimes still see my local network, but I lose internect connectivity. I seems to be at random. But the impression I get is that it is something on the wireless network that is causing it as it seems to be worse if I connect my works laptop to the internet via a wireless VPN connection.

I also have a WB NAS drive connected (Soon to be ditched due to problems with it corrupting files and being extremely slow to extract data) and a Wii (Wireless).

Or can any recommend a ADSL wireless router that works well with Vista? (I have to run the PC and NAS drive with static IP addresses due to the time it takes for the network to connect if I use DHCP)

Thanks

Mark

A:Netgear WGRv6 Wireless Router

Hi mark,

Have you checked the manufacturers site for firmware upgrades?

I know certain Netgear routers had problems with Vista at the start

NETGEAR Product compatibility for Microsoft Windows Vista

6 more replies
Answer Match 67.62%

Hi i Have a Netgear DG834G router with MS Vista 32 bit with an inbuilt adapter and want to go wireless...Can anyone help ASAP please,,,?
 

More replies
Answer Match 67.62%

Hi

I've got a netgear router which was enabling me to use my laptop on the internet perfectly - no problems. I had noticed that my wireless network connection was listed as non secured and this was a problem I was going to rectify. However having managed to log on to the internet and get a wireless connection fine this morning, and hour later I have returned to find that it is now listing my wireless connection as secured and asking for a network key for us to gain access.

I have never inputted a network key and therefore don't have the foggiest what to put in.

I'm thinking maybe someone has managed to use our wireless connection from outside of our home, then changed the network key? Is this possible? What can I do?

Any help gratefuly recevied.
 

A:Netgear Router Wireless Problems

yes it is possible
connect to the router via a cable connection
logonto the router
and change the key or remove

also change the default usename and password of the router

all default routers usernames and passwords are in the manual and available to anyone to see
 

1 more replies
Answer Match 67.62%

Hello everyone, I registered just to ask this question. Now, maybe I'm stupid, but I can't seem to figure out what the problem is with my new Router. The router itself is a NetGear WNR1000. My router is hooked up to both my Modem and my computer, as well as a chord to my Xbox that I rarely use. I use its Wireless abilities for my wife's laptop. Now, I put in the CD and went through all that set-up and such and it seemed to be okay, but my internet has been bad ever since I hooked this thing up.

My Ethernet and Internet lights on the Modem are near-constantly blinking, but the other two are fine. Sometimes my internet works okay, if very slowly, but sometimes a page won't show up and says "Webpage not Available" but if I refresh a couple of times it always comes up eventually. The laptop has this same type of half-internet. When I play WoW sometimes it lags horribly and sometimes it works perfectly fine. This has been going on for a few weeks since I put the thing in and I'm tired of it, so I came to you guys to see if y'all could figure it out.

When I go to CMD and type IPCONFIG/ALL it claims my IP Address is 10.0.0.2 but What Is My Ip the website claims its actually something else.
 

A:NetGear Wireless Router Problems

16 more replies
Answer Match 67.62%

I use cabled internet connection. I have only one internet cable. I plug in to my laptop, write the MAC address of the internet, open the log-in page of the internet service, write down the username and password and then I surf the internet. The question is how can I set up my wireless router?

I tried it but there was no internet access. I know the password of my wireless router's password but when it connects it says 'No Internet Access'. So I went to my laptop's wireless port advanced settings and wrote down the MAC address in the Network Address tab. Still no connection.

So I am asking, what can I do in such situation like this? Do I need a modem to do this or the MAC address/log-in page is causing problem. I need answers ASAP, thank you.

A:Is it possible to set up NETGEAR wireless router without a modem?

go to the router web page... 192.168.0.1 (or similar), set up a wireless network, then try your adapter...

9 more replies
Answer Match 67.62%

Hi, all help is appreciated.

Here's my computer's info

.

Windows IP Configuration

Host Name . . . . . . . . . . . . : LW-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetLink (TM) Fast Ethernet
Physical Address. . . . . . . . . : 00-22-19-D0-45-55
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::7ca2:1439:d959:3ae0%17(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Monday, August 30, 2010 10:35:06 AM
Lease Expires . . . . . . . . . . : Tuesday, August 31, 2010 11:35:46 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter
Physical Address. . . . . . . . . : 00-1F-E1-34-B5-78
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Bluetooth Network Connection:

Media St... Read more

A:Can't get Netgear wireless router to work

Can you tell us what happens(error messages etc) when you try to use it ?
 

1 more replies
Answer Match 67.62%

will the NETGEAR DG834GT WIRELESS ROUTER work on virgin broadband.i have a webstar modem which they supplied and i want to get the internet on my laptop.Will this router do this?
 

A:Netgear Dg834gt Wireless Router

That's probably a question for Virgin. Is this a cable or ADSL connection? Since that router is an ADSL modem/router, it most certainly won't work on a cable account.
 

1 more replies
Answer Match 67.62%

Well I just bough myself a NETGEAR 54 Mbps Wireless ADSL Modem Router DG834G v3

I dunno how to set it up lol. It didnt come with instructions but it did come with a CD which had them on it. I have followed the instructions and it responds but I do not receive internet or doesnt pick up with my laptop as wireless. When I go to the Default Access website it pops up with the password and I type in the defaults and it says its incorrect.... What do I do?
 

A:NETGEAR Wireless Router Setup

16 more replies
Answer Match 67.62%

I have a netgear rangemax wireless router, and my internet is very flakey. I can access some pages, however some pages will not allow me to view them. it is almost like i have a filter on but i have nothing in place to do so. I was wondering if anyone had any kind of dealing with this kind of router if so I have a few questions. Thanks
 

A:Netgear Rangemax Wireless Router, :(

8 more replies
Answer Match 67.62%

i have my netgear wireless setup in my house with two computers on the network.....the default security for the router is none. i can make contact with my router and put a WEP paraphrase in and the connection becomes secure...however when i do this it causes the other computer to get kicked off the connection. so i make contact with router ont he other and set the same paraphrase and then neither computer is able to get on. do you have to have different paraphrases????? suggestions cause i'm about to go out and buy something new!!!!!

thanks
Lori
 

A:netgear wireless router WEP settings

10 more replies
Answer Match 67.62%

I have a user who installed a NetGear USB wireless adapter in a WinME desktop system to connect to a DLINK Wireless router.

The adapter is showing signal strength of 68% so I'm assuming it sees the router.

However, there is no connectivity to the net or to the other computers in the network. There is a WinXP desktop system cable connected to the router as well as 2 laptops which are both wireless connected.

I have ensured that WEP is disabled on the ME desktop as well as the firewall software. The adapter config gives two options for network connections, default and first available. I have tried both with no luck.

I've been told to make sure SSID Broadcast is enabled in the router.

Any other ideas?
 

A:NetGear Wireless USB to DLINK router

15 more replies
Answer Match 67.62%

I have recently installed a netgear WGR614v6 and it works perfectly well wired but wireless will not work. I have gone through the wireless settings and all look ok. On my laptop the SSID and WEP key both match exactly.

I have searched the web and other people who have had this problem have used netgear software to configure their wireless cards and the problem was solved however I have a work laptop and a PS3 both of which can't be configured. Is there anything I can do on the router to get it to work.

On the laptop I can see the router but when I try to connect I always get "Failed to Associate" message.
 

A:Can't get Wireless Access Using Netgear Router

8 more replies
Answer Match 67.62%

Hello - can anybody direct me or assist? I have a WNR2000 broadband wireless router version 1, and a WNR11 wireless usb adaptor, they came from DigiDave who do not respond to questions or emails.

There was no installations disc but they directed me to www.netgear.com for downloads. The downloads don't run, can anyone direct me to a solution please?
 

A:Netgear wireless router problems

can you providse more information
Who is the ISP
What service have you got , cable, ADSL
what modem do you have.

Detailed istructions here
http://kb.netgear.com/app/products/model/a_id/2614

There is a setup manual on that site - which also descibes how to manually set up the router

The downloads don't runClick to expand...

can you be specific
They dont download any files - or you cant open them
They are PDF files and would need the adobe PDF Reader
 

3 more replies
Answer Match 67.62%

Hi, Does anyone have familiarity with a Netgear DGN2000 wireless N ASDL2 + modem? Here's my minor frustration.If I turn on the router & let it do it's thing & connect to the internet, then turn on my Dell laptop 1520 with it's 1505 Draft 802.11N adapter, it connects wirelessly,no problem. But if the laptop goes into standby, connection is lost & no way can I get it back.Whenever I try using the utility of the laptop, it thinks the router is asking for WEP security which won't work because it's set for wpa-psk. I say no way, but I mean normally. If I plug in the ethernet cable, access the router, check the wireless settings (no changes made) & log out, it connects wirelessly & I can remove the ethernet cable no problem.It's like the router has a setting somewhere that needs to be set. Anyone with ideas or have a similar problem with this model router?
My desktop is connected via ethernet & I never have any difficulty with it.Both units are running Xp.
Ben
 

A:Wireless disconnect on Netgear router

15 more replies
Answer Match 67.62%

Hey Dudes!
I am at my friends house and they need my help...so here's the deal:
Cable Modem is fine.
Wireless Router is fine with Modem.
I am able to connect to the web/email via ethernet cable thru the Cable Modem.
Called tech support via cable modem (internet provider) and they said Cable Modem and Wireless Router are communicating fine with eachother.

Called Netgear....boy were they helpful NOT! They said that hardware wise the Wireless Router is good to go....so then they said get on their website and pay up the wazoo for an email that will give me step by step instructions to figure out why I can't get my friends 3 computers (1 tower and 2 laptops) to connect to the internet and send/receive email.

SO - what up???? I have re-set and rebooted until everything is spick and span! There is nothing left to do but bow down to you super duper smarty pants that always get me set straight - your awsome at this!

HELP!!!

-Joy...via her friends house.....
 

A:Netgear Wireless Router Issues....

16 more replies
Answer Match 67.62%

Hi

I have a Netgear Modem router N600 DGND37))v2. It is working fine connected to my pc. But it will not connect via wireless with ether my Huawei note book or my iPad. i have put in the password, changed the channels but it still won't connect. Can anybody help me sort this mess out?
Many thanks in advance
 

More replies
Answer Match 67.62%

I am wanting to use my old wireless router. I haven't used it in a year and I can't remember the network key that I used and it wont let me sign in. What can I do?????
 

A:Help setting up netgear wireless router

there should be reset button on the back or front. you might need a pen or something to press it with. this will reset the router back to factory default settings.
 

3 more replies
Answer Match 67.62%

I'm not able to remotely connect to my Netgear router.

The router is connected to a switch. I've already setup the router ro allow "Remote Management" for everyone. So far, I can only manage the router through direct connection. When I try to login from other computers that's connected to the switch, it fails.
 

A:Netgear Rangemax Wireless router

10 more replies
Answer Match 67.62%

I am trying to use Bit Torrent and don't ever seem to be able to connect and have read somewhere that the firewall on the router could be blocking the inbound traffic. I have no idea what I need to change on the settings so was wondering if anyone could help. It's a Netgear Wireless ADSL Router Model No. DG834G v2
Please help as it's getting frustrating as there is so much good stuff I need.

Many Thanks,

Tim
 

A:NetGear Wireless Adsl Router

Please visit the TSG Rules, and note that we provide no support for P2P applications or their problems. This thread is closed.
 

1 more replies
Answer Match 66.78%

i have a problem with my computer and my wireless rputer, the problem is that when my computer is turned on tge ethernet port numer 1 light on my router is green and that is how it is supposed to be, however when i shut my computer down the light for ethernet port 1 goes orange, but when my computer get switched it changes back to green on windows 7's login screen.

this was working fine a couple of days ago howevr it has just started happening, i have tried the lead in different ethernet ports on my router and tried using a different ethernet cable. i have aso u ninstalled and reinstalled the driver for my computers ethernet port, my ethernet port is built in to my motherboard.

os: windows 7: home premium, 64-bit
router: netgear dg835g v3 with latest firmware

A:windows 7 and netgear dg83g v3 wireless router

1. Try power cycling the modem: unplug the power from the modem for about 15 seconds and then plug it back in.
2. Download the latest version of your NIC drivers.

9 more replies
Answer Match 66.78%

Greetings,
I own a netgear wnr3500 wireless router. Any ideas on how to disable the connection that the xbox is making with my wireless router. I want to retain the wireless broadcasting, since I have several computers connected to the router.

I want to disable the connection at night.

many thankds,

regards.
 

A:How to disable XBOX 360 from a netgear wireless router

8 more replies
Answer Match 66.78%

I just got an HP Photosmart C6380 printer that's wireless for Christmas. I'm trying to set it up right now and I'm doing it wirelessly. However, the printer cannot detect my Netgear WPN824 router, which is only 4 feet away. I can't, for the life of me, figure out why! Does anyone know why that is and how I can get the printer to detect it?
The printer allows me to manually add my router in but whenever I do, it still tells me that the network can't be detected. Any ideas? Thanks.

And if it makes any difference, it's definitely my router because the printer can detect my neighbor's router. I believe he has a Linksys. I, on the other hand, have a Netgear.

I do have SSID Broadcast on, so I don't believe that is the problem.
 

A:HP Wireless Printer can't detect Netgear Router?

You need to do a lot more reading... about simple networks, and such... The info is available with the HP printer, and with your router... but hard to decipher.
 

2 more replies
Answer Match 66.78%

Having issues with my NETGEAR WNR834B wireless router. I initially lost my modem (charter.net) - had to replace. After replacing and going through a few "support" personnel, they determined that something was wrong with my router.

At the time, the router power light was not ON at all. Disconnected completely and messed with the "reset" button on the back a few times: power on, reset button, power-off, reset button...blah, blah (many times).

Finally the power light is ON and green - can only assume that the reset process worked.

Now, I can seem to access the router to begin to reset everything from scratch - I've seen this same question in this forum as far back as 2007.

According to the instructions and all that I've found her and other places, I don't need an internet connection to connect to the router....well tried and tried, used different cables for input and output...but not luck.

The Power light is Green, the LAN light (cable from router to CPU) is Green, but wireless light is NOT ON.

Bought this router a couple of years ago from a friend...no disc or paperwork - got NetGear manual from website (used this for the initial connection...2 yrs ago).

Appreciate any tips or "next steps" ...all are welcome.

Thanks,
Joe
 

A:Cannot log into 192.168.1.1 or http://192.168.0.1 to setup my wireless NETGEAR router

8 more replies
Answer Match 66.78%

I have a Wireless Router (Netgear WGR614 V7) and I am facing problems with it while connecting to the Cable Modem.

My Setup: I have Broadband Internet from Cox Communications. I use a Motorola SB5120 Cable Modem. I then connect my Netgear Router to the Modem to get wireless internet.

Problem: When I connect the Netgear Router to the Modem, the router works for 6-8 hours without any interruption. But thereafter it starts dropping the Internet signal very frequently (every 3-5 minutes). The wireless connection is dropped as well as if there are any wired connections using the router. If I power off the router for 2-3 hours it is ready to work for another 6-8 hours. If I go through the normal power cycle suggested for routers (power off the modem, power off the router, wait for 30 seconds, power on the modem, when all the 4 LEDs on modem are Green power on the router) the router drops signal every 3-5 minutes.

I have tried hardwiring (using an ethernet cable) my laptop directly to the cable Modem and I get very good quality internet signal (Approx 15000 KBps Download and 500 KPBS Upload Speed). I don't experience any drops in the internet signal. So the problem should not be related to my cable company or the cable modem.

Looking for any help if I can get on what can be done with my router!
 

A:Wireless Router (Netgear WGR614) Problem

6 more replies
Answer Match 66.78%

I've got an old Toshiba laptop I'm trying to resurect for backup use. Has a Linksys WPC11 v3 Wireless Network PC Card. I have a Netgear N300 Wireless Router WNR2000 v3. The router works fine with every other computer I've tried (all with built-in wireless) except the one with the Linksys PC card. I have uninstalled, rebooted and reinstalled drivers downloaded from Linksys/Cisco. Also, running XP. This PC card with this computer used to work just fine with a Linksys router. Any ideas? If so, I'll need guidance getting in to router and/or PC card setup. Thanks.
 

A:Linksys wireless card not does not see Netgear router

Any of the other PC's using 802.11b (as that one is using)?

Typical rule of thumb is to disable all security settings on the router for testing to rule out security features as an issue.
 

3 more replies
Answer Match 66.78%

I have recently purchased a new Compaq Laptop and can not connect to my wireless Netgear Router. The laptop can see the router when you go to Network connections but will not allow me to connect. I ahve configured the router and using WPA-PSK and have entered new passphrase. I have also ammended the settings on the network connection on the laptop to reflect the same. I still however cant connect - says "cannot connect to Network" Has anyone got any ideas what I am doing wrong am a novice with laptops and wireless connections. Thanks
 

A:Laptop cant connect to wireless Netgear Router

8 more replies
Answer Match 66.78%

I have a Netgear wgr614v6 router. Currently, I am using an AirportExpress for my macbook, printer and inspiron 1545. I want to switch to the Netgear because it has more ports and it is compatible with my Netgear gaming adapter.

So I go through the setup process (I am setting it up on the MacBook) and it works fine while connected via ethernet cable to the mac. However, when using it wireless, it shows up in the network preferences area with a green light that says connected, but web pages do not load. It looks like they are going to, but it just says loading forever. I have the WPA security enabled and the device access list disabled. I am very new to networking and even fairly new to macs. I still cannot figure out the problem here. Any help would be much appreciated.
 

A:Netgear router works while wired, but not wireless

Can't help you much with MAC, but standard operating procedure is to get the wireless working with no security first. Then enable the WPA-PSK and try to reconnect.
 

1 more replies
Answer Match 66.78%

I bought this on eBay last year and never got it running. It was new but had no serial number, as it was part of some OEM situation (can't remember the details). I tried to get support from Netgear, but they refused because of the lack of a serial number. The Seller on eBay said that rather than following the instructions I got from eBay via email support (which they do provide even us serial-less peopl), which I never got to work for some reason) that I should create a network bridge first.

Are there step-by-step instructions for accomplishing this somewhere?
 

A:Netgear Rangemax Wireless Router WPN824

Hmm... No serial number... OEM situation? Doesn't sound like any OEM situation I ever heard of.
 

2 more replies
Answer Match 66.78%

Hi. Need a lot of help here please......
Let me quickly describe the situation.

I have an ADSL broadband router.
I have recently purchased a NETGEAR WGT 624 wirless router so that I can connect laptops to our network.

Following advice posted on this site previously, I have use lan cable to connect the ADSL router to the netgear. I somehow managed to turn off the DHCP server and have set a static address. I have no idea how i did this or what the static address is, as I fiddled a lot and somehow got it to work.

As I sit here my laptop is able to connect to the wireless network and pick up the network called NETGEAR. It is only a local connection however and does not pickup the internet.
If I plug in a lan cable from the NETGEAR to the laptop, I then have internet connectivety.

The main problem is I have no idea how to configure the netgear router. The manual says:

To log into your router after you have configured your router, do the following:
1. Type http://www.routerlogin.net in the address field of Internet Explorer or Netscape®
Navigator.
When prompted, enter admin for the router user name and password for the router password,
both in lower case letters (or enter the password you chose if you changed it during the setup
in “Initial Configuration” on page 3-2).
Note: The router user name and password are not the same as any user name or password you
may use to log in to your Internet connection.

When I follow these instructions, my browser (firefox and internet exp... Read more

A:Configure Netgear WGT624 wireless router

10 more replies
Answer Match 66.78%

Hi all,

Recently I purchased the above mentioned router, cos I have just got a new laptop that is WI-FI enabled so I thought that I would try wireless, but with no joy !!!!!!!!

I'm connected via cable to a modem then to the router. When I turned on the router it ran the quick test no problem. The internet light is illuminated and blinking occasionally, so I presume that there is a connection there. The Wireless icon remains unlit nothing from that (don't know if there should be), but I am unable to connect to the net the laptop says there are networks available, but I don't know if it has picked up someone else's router.

P.S the internet runs fine on my PC.

The laptop is running Vista as an O/S, which I do not really know much about.

A really dumb question "do I need to install the netgear software first"

Sorry for being thick.

Wizzkid
 

A:Netgear Wireless-G Cable Router WGR614

9 more replies
Answer Match 66.78%

I'm having trouble setting my refurbished netgear router. It didn't come with a setup CD. I tried setting up a wireless network on both my computer and my roommates computer, our laptops can pick up the network's signal but we are not able to access the internet. We tried following the instructions on netgear website, but we are unable to access the netgear setup website (www.routerlogin.com/basicsetting.htm or 192.168.1.1)

what should we do? please help! Thank You
 

A:netgear wireless router wpn824 v2 setup help

7 more replies
Answer Match 66.78%

I have a dell Latitude 800 with the built in Intel PRO Wirelss LAN 2100 card.

At work the card works fine with the linksys BEFW11S4 wireless router at the office. No problems at all.

I purchased the netgear MR814 wireless router for home use. I have 2 other non wireless PC's on my home network that work fine on the switch of the new netgear wireless router. I created a connection for the new wireless network and did a scan and found the netgear wireless network with excellent signal. I am able to surf the web, check email etc fine at great speeds for about 10 minutes. Then the connection will drop from "excellent" to "Out of Range". I scan for the network and see it, but the connection stays on out of range. If power down the wireless router, and power it back up, connectivity is immediately restored, for about 10 minutes, then I have to reset it again. Note that my proximity to the netgear wireless during this testing is never more than 10 feet away in the same room.

I use the default router settings origionally. Then changed the default channel, changed the security settings etc, all configurations exhibited the same behavior.

Seeing as how the linksys works perfect, Im assuming its a problem with the netgear. Anyone have any suggestions??

Thanks
 

A:Netgear MR814 Wireless Router Issues

make sure to set your wireless computer on auto negotiation and download the latest firmware for both the routher and card.
 

3 more replies
Answer Match 66.78%

Hi TSG,

I have a Sony Vaio laptop (WinXP) with B/G wireless integrated card connecting to a 8011/B Netgear DG824M AP/Firewall/Router acting as a DHCP (or is it DCHP?). I have connected to the router and other desktops/laptops on my wireless home network in the past.

But - the connection intially shows up as "Excellent" but then is lost and I am unable to reconnect. I have researched this problem on the net and have changed battery power saving setting, installed the latest Intel drivers, removed MS XP SP1 WAP patches that may have caused a problem and released & renewed the IP address many times but to no avail.

My Intel ProSET software says that the wired connection has an IP address of the 'correct' 192.168.0.2 (even though it is unplugged) but the wireless card has 0.0.0.0 (cannot renew its IP address). Have these adapters gotten confused or are there some other things I can try to sustain a connection?

many thanks in advance.
 

More replies
Answer Match 66.78%

Hi, Iam trying to add a new computer to my wireless statione access list but have not been successful. I got the ip address of the computer i was trying to add, my issue is how to add it to the list. i tried adding the details and filling in the device name and MAC address but kept getting the error message "invalid MAC address.please enter again.
Would appreciate if anyone can assist please.

Cheers.
Amador
 

A:adding new computer to the wireless router netgear

make and model of the router you are adding this to
can we see an ipconfig /all from the PC you are trying to add
------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------
 

1 more replies
Answer Match 66.78%

Hi,
i am trying to setup a netgear wgt624 v2 wireless router to a cable modem to allow wireless internet connectivity. Simple enough until you factor vista into the mix it seems.
i know the ssid is broadcasting cos i can see and select the network from my xp laptop (and iphone) but on the vista laptop the ssid does not show up in the detectable list. if you go into connect to network/show networks.
however if you go into network and sharing cetre/wireless networks there it is at the top of the list !
I have restarted everything in the correct sequence and also updated the drivers online for the wireless device in the hp laptop. any ideas what to try next, as the device is not only visible and selectable but working in all other respects on other machines?
i confirm that the wlan is on in the vista laptop and it works on other wireless networks.
cheers
streekie

A:wireless netgear router ssid problems

Hi streekie.

Please download and run VistaForums SysInfo Tool (Click on Select All, then click on the Windows logo). After it runs, export to a file and upload the file with your reply (see Vista Forums - FAQ: Reading and Posting Messages).

Also, could you attach a screenshot of your Network and Sharing Center screen (How to use the Snipping Tool in Vista - Vista Forums).

Ed

2 more replies
Answer Match 66.78%

i have a netgear wireless router that has a non secure channel set as default. well, i thought i finally managed to compuicate with the router and the network card to set up the 64 bit WEP. all was good and running fast but this morning i woke to being off line and my system picking up three other wireless networks. all that have the WEP security set. i guess i'm a little confused as to why i keep trying to find other networks. my signal shows that it is strong.

any help???

thanks
Lori
 

A:netgear wireless router security issue

9 more replies
Answer Match 66.78%

Just moved house and have taken on Virgins 10mb BB service.

All works brilliant on my PC running Vista 64bit when I connect direct from the modem however , I want to use the Wireless Netgear router to hardwire a games room next door.

I have used the wireless installation disc and get through as far as the point where my pc finds the router. When booted up all lights appear as they should so I know its not a dud.

All connections are as they should be but my PC cannot find the Netgear Router.

I have tried numerous reboots and have even spoken to Virgin Tech Support!!!! who said it might be the port settings.

Any clues anyone?

A:Netgear Wireless Virgin Router Problem

try to install it wired and than go wireless. i think that might be your issue.

3 more replies
Answer Match 66.78%

A friend gave me a Netgear 3300 wireless router. No start up disk, just the router. I get internet through Comcast. My main computer is an iMac. I want a couple of MacBooks, an iPad2, and a Dell laptop to connect to the wireless network. First, will the 3300 work with these devices? Second, what do I need to do to set up the router? Third, how do I connect the devices to the router? Thanks.
 

A:Setting up Netgear 3300 wireless router

Is this the exact model DGND3300
http://www.netgear.co.uk/home/products/wirelessrouters/high-performance/DGND3300.aspx
This is an ADSL2 Modem/router - so connects directly to a DSL/Telephone line
First, will the 3300 work with these devices? Click to expand...

should do - I will look the router up - but see no reason why not
Second, what do I need to do to set up the router? Click to expand...

You dont need a CD to setup a router
Need more information -Is the router connecting to a DSL connection - do you already have a modem - if so post the make and model of the modem
If you have a DSL connection - then you will need to log into the router and set up the connection details to connect to your ISP service
Who is the ISP
Third, how do I connect the devices to the router? Thanks.Click to expand...

[/quote]
By cable or wireless
The ipad will be wireless , the Mac - depends if they have a wireless adapter on them
 

1 more replies
Answer Match 66.78%

I have a NetGear FWG114P Router with a desktop PC, an IOMEGA backup drive, and printer all pugged directly into the router. I also have a Dell laptop with XP SP2 and a NetGear wireless G card. The router drops the connection to the laptop very frequently. The connection to the desktop and the printer have no issues and the connection going from the laptop to the router is fine. The only way to restore the connection is to re-boot the laptop or the router. I have tried everything to eliminate the problem as it has lasted for several years. Upgrading the firmware on the router, buying a new 5.8Ghz phone, and installing a more powerful antenna to boost the signal, have not made a difference. The signal strength is consistantly strong, so I know that is not the issue. Recently I tried something that did work but I do not understand why. I keep a browser session open to maintain a connection from the laptop to the Router - specifically when I boot up the laptop I login to the router and keep it logged in the entire time I am on the laptop. That way my connection to the router does not drop. I would much rather find the real cause of this problem. Any ideas?
 

A:NETGEAR Router drops wireless connection

It seems that no one ever responded to your post. However, I can vouch for exactly your experience. I bought my FWG114P after my previous FM114P failed suddenly after about 3 years. I wasn't happy about it failing but it was reliable as long as it ran. But the FWG114P is anything but reliable. I'm on my first replacement now and it drops the wireless signal randomly and for random periods of time just like the first one did (it does seem to come back of its own accord most of the time, without a computer or router reboot). I have given up trying to get Netgear to admit that there is some fundamental problem with the wireless function of this device, basically because I don't want to hear them tell me one more time that it must be interference (obviously interference that just happened to start when I bought the first FWG114P!). Even pointing them to various forums where people are complaining about exactly this problem doesn't seem to make any difference! I haven't bothered getting a third machine because I know it will have the same problem. Yes, it's disappointing and frustrating.
 

2 more replies
Answer Match 66.78%

What does one do when Verizon says to contact the router manufacturer, and the router manufacturer says to contact the DSL provider?!

Before trying to setup my daughter's desktop computer (Windows XP Home and a Netgear WG311 wireless card) as a wireless connection to the WGT624 using Verizon DSL (she has a phone jack in one room, but wants to use the computer in another room), I contacted Netgear support to see if this was feasible.

No problem they said, but that in order to do the initial setup on the router I should be connected to the router. Not a problem either, since I simply connected my laptop to the router and had easy access to the router setup. Don't know what I did the other day, but did in fact have her connected; as long as the computer remained on, she was connected. However, she called the other night to say that upon booting up her computer, she had no connectivity (though the connection between her Netgear WG311 card and the WGT624 router was excellent, according to the icon in her taskbar tray).

The challenge is know WHAT bits of information in the WGT624 setup need to be completed, and WHAT the values should be. I am currently connected at home to Comcast broadband and have a wireless network working just fine. I suspect there may be a field or two that need information for the DSL to function properly that I didn't have to provide for the Comcast setup.

Anyone with experience setting up this kind of arrangement who can point to particu... Read more

More replies
Answer Match 66.78%

I have to purchase a wireless router and my 2 options are Belkin G and Netgear WGR614.I have Nintendo DS so i would like to connect it internet through Wifi.Please tell me which one would be more suitable.
Thanks.
 

A:Which wireless router is better among Belkin G and Netgear WGR614

Well, given my dislike for most things Belkin, I'd pick the Netgear.
 

2 more replies
Answer Match 66.78%

Wireless Router is a year-and-a-half to two years old (Netgear Rangemax WPN824)

I have Cox Cable's premium broadband service. When connected directly to the modem, my download throughput ranges from 11 mbits to 24 mbits; upload is around 3.8mbits

when the router is connected, the most I'm getting is 6-8 mbits down, and about 1.0 up.

I've reinstalled and reconfigured to the best of my knowledge, and still get the same results.

Should I get a new wireless router? Any suggestions?
 

A:Netgear Wireless Router (throughput problem)

14 more replies
Answer Match 66.78%

I am literally about to pull my hair out... I currently have a cable modem and a netgear wireless router N600, and about a month and a half ago I suddenly lost all signals. I have been on the phone with my cable co as well as Netgear, and they are both telling me that their equipment is fine. In the meantime I have purchased 2 additional routers thinking it was a router problem, neither of them worked as well. I also hooked both up to a completely different computer and still getting the same results. It seems to me that the modem and router are not "talking" to each other. I can get on the internet fine with just the modem, but it doesn't connect at all after I connect the router to the modem (I am able to get a wifi signal from the router on my phone, but no connection) If anyone can please help me ive explored every option I know to think of. Thanks! Brandi
 

A:Networking issues with netgear wireless router

16 more replies
Answer Match 66.78%

Hello,

I own a Windows 8 PC, LG Optimus 2X, Sony Xperia U, Samsung Galaxy Tab 2, Xiaomi MI3. All of these are connected to my Router via WiFi and they work like a charm.

I recently purchased G-Box Midnight MX2 (All The Way From US - India). THE PROBLEM: Does Not Connect Over WiFi But Works Perfectly Over Ethernet Cable!

The device (currently connected to my TV and I am using an Ethernet Cable connected to my Router) recognizes my router name. But when I enter the password, it says connecting for 1-2 seconds and nothing happens. When the Ethernet Cable was already connected and when I tried to connect via WiFi, the device prompted a message that it cannot connect to the Router via Cable and WiFi at the same time. So, I've tried all the ways possible by removing the Ethernet Cable.

What I've Done:

MAC Address Already Added To Router's Attached Devices.
Disconnected/Switched Off A Hundred Times.
Tried All Security Options On Router: None, WPS, Security Key Blah Blah Blah.
Also Installed WiFi Fixer (using Ethernet). I don't know what's happening but I could see something Connecting...Disconnecting...Connecting.Disconnecting...
FYI: I Earlier Tried To Connect A Dell Laptop and it showed Limited/No Connectivity. The Laptop was at my place only for a day, so we managed by Ethernet and never bothered when it did not connect over WiFi. The same problem occurred when I tried to make my PC Wireless, by using a WiFi Adapter! I tried tried tried but ignored a... Read more

More replies
Answer Match 66.78%

I am trying to download a netgear wireless router rangemax wpn824v2...and the files is "chk" my laptop says that i have to set up in control panel a file where to download..i dont know how to star that..please helpppp
 

A:download w/o cd netgear wireless router wpn824

holaaaa,
wecome to tech support guy,
.
- you're having trouble with the DOWNLOAD?
this is the link for the DOWNLOAD:
http://kb.netgear.com/app/answers/detail/a_id/1222
.
this is the file:
WPN824V2-V2.0.26_1.2.17NA.chk
.
- you're having trouble with DOING the firmware update?
just follow the directions on the download page,
remember WHERE you downloaded it to,
- log into your router
- click the maintenance > router upgrade
- click browse to find the file [WPN824V2-V2.0.26_1.2.17NA.chk]
- click upload
 

1 more replies
Answer Match 66.78%

Greetings, My Laptop will not connect to my Netgear Router anymore today. It was working earlier (that's what mum said), and then it wouldn't connect anymore. All I get is the 6 bars that is grey with a yellow sun over it and under the Network Connections it say's its "Attempting to authenticate". I don't know what happen however last night the power went out for a couple of seconds so I don't know if that played a part or not but you can't rule out anything yet. Oh and I did a hard reset on the router and modem. I even went as far as to try advice I found on google but nothing worked. I tried deleting/uninstalling the wireless card under device manager and waited for it to restart but that didn't work. I even tried a system restore and that too didn't work. I also did the whole ipconfig /release, /renew, /flushdns and nothing worked. Before some people ask this question I will answer it: I did connect ethernet cable and it did work just fine. So I'm thinking its more of the wireless card that is messing up or something like that because I can connect using the Ethernet port. I am at a lost of what I can do now. Thanks for the help to all those who reply.

A:Wireless connection not connecting to Router (Netgear)

I did another test in which I used a USB Wireless adapter (54Mbps), and It didn't want to connect. So I'm now pretty sure its a Router problem but I don't see how that could be because I did a hard reset and I did backup recovery before I did a reset so I can restore it.

Here is an image from Xiirus Wi-Fi Inspector. Please note I did change the Channel to 8 after I noticed that someone else was also on that channel.

4 more replies
Answer Match 66.78%

I feel like a dunce not setting up password protection for my Netgear Wireless Router model WNR 2000 v1 when I had the free tech support. Now they are willing to give me directions through email for how to do it, but it all starts with "registering my router and then they say a "pop up" option will appear to create a login. Well the problem is that I'm already registered, and I can't get the pop up option to appear. There must be a way to get to the wireless password protection without having to register the router again. Any Netgear help out there?
 

A:Trouble securing my wireless Netgear router

6 more replies
Answer Match 66.78%

I was online the other night and suddenly disconnected from the internet. My desktop is a wired connection that was wired through the Netgear Wireless-G Router WGR614 v-9. I couldn't understand why I would not have internet so first I checked my modem, everything seemed fine. So when I took the router out of the equasion and wired my computer directly to the modem it worked fine. I have tried resetting the router, using a different ethernet cord, and unplugging it for 10+minutes. No luck. And since I'm pretty computer illiterate, I have no other ideas. Any suggestions?

thanks.
 

A:Netgear wireless router quit working?

They don't last for ever something could of caused it to go Dead. Just buy a new one or try to upgrade the firmware.
 

4 more replies