Tech Problem Aggregator

wifi adaptor not recognized, usb wifi hogging wifi resources

Q: wifi adaptor not recognized, usb wifi hogging wifi resources

recently i was having major computer issues on my desktop, i did a full restore to factory settings and after doing a few windows updates i found that my network adaptor was not finding any signals. it does not show up in the change adaptor settings page or in the device manager page. when i troubleshoot my internet connection it says an ethernet cable is not properly plugged in. I have a desktop computer but it definately has a wireless network card. i used to get windows updates for it and it just stopped working one day. when i look in the BIOS the only option related to booting a network card is B03 D00 Yukon PXE. no matter when i boot it i still dont get wireless signals. when i go into the boot menu and try to boot this device it says " PXE E61: media test failure please check cable" i have opened the tower and the card is securely in its slot. i thought i would workaround by getting a usb wifi card. I installed it and connected to the internet and it alternated between having a connection to the internet and being connected to the network but not the internet. even when it is connected to the internet i cannot reach any web pages. my dropbox desktop files update very slowly (7kb/s). when i am connected with the usb card the network stops working for everyone else in the house. they can no longer reach web pages or continue downloads. please help.

gateway DX4300
AMD Phenom II X4 810 processor 2.60 GHz
8.00 GB DDRII RAM
windows 7 home premium

EDIT: additionally nothing shows up when i scan with avast antivirus

A: wifi adaptor not recognized, usb wifi hogging wifi resources

13 more replies
Answer Match 90.9%

Hi, wifi is not connected properly. Network connection list is visible but try connect means,thrown error as unable to connect. After troubleshooting i am getting the below error message "Problem with wireless adaptor or access point".  Please suggest me to resolve the issue.  

More replies
Answer Match 90%

Hi,

computer has some issues with the wifi adaptor. If i install it, and set windows to control it, at some point, after "connecting" for >5 mins, it reports: "Connected"... kinda ridiculous, because if i punch in ipconfig /all in the console, it does not show this adaptor's IP settings at all. If I change the IP setting thourgh the properties window, it prompts me to reboot. After the reboot, the settings are not applied!

However, in the device manager, it shows the device and it says it's working fine.

USB driverupdate did not solve the problem, I can't find a bios update any more... any better ideas? PLEASE?
 

A:Trendnet USB WiFi Adaptor not recognized

Windows Vista?
 

7 more replies
Answer Match 89.4%

Hey so at my apartment complex all I have is wifi available, there seems to be a ethernet port on the wall downstairs but I dont think it works. I was thinking of getting a Wifi to Ethernet adapter but I do not know if that actually will make it so my connection is stable and doesnt get affected by people streaming etc. I notice that it says it would pick up wifi and then I could use my ethernet to connect it to my computer. I don't really understand how all this works. I would like some help figuring out what to do. I can always try that port. or is there something I can plug into that port that would give me a stable connection? I'm running out of ideas. Anything helps. Thanks!
 

A:I only have wifi available at my apartment. will using a wifi to ethernet adaptor help?

you can do that with some devices
BUT I do not think it will make any difference to your issues , as its still using the wireless signal

it will get affected by people streaming

in the LAN connection , have you tried plugging a cable into a laptop ?
 

7 more replies
Answer Match 104.58%

I have a perfectly running PC and a working wireless adapter but funny thing is that my home wifi cant be detected while neighbor's wifi are listed down. The problem occur whenever I send my PC to repair, after the whole process when I want to get my PC connected to the internet but just cant. It has happened to me 3 times and total I bought 3 different wireless adapters, I dont want to keep buying new wireless adapters just to search for my own wifi. My other devices worked fine with my home wifi as I am typing this on my Iphone instead because my PC cant detect my own wifi !!!!!! VERY FURIOUS.

thanks for reading and i really hope for an answer as soon as possible because i just wana dota on my new PC.. please help me.
 

A:Wifi adapter can detect other wifi but not my own wifi

It has happened to me 3 times and total I bought 3 different wireless adapters,Click to expand...

has that resoved the issue or not
it maybe the signal is broadcasting on channel 12/13

can you connect the pc directly to the router with a cable and then
------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file to the faulty PC and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply

http://go.pardot.com/l/66982/2015-01-26/2361i
enter you details
Download this file "DOWNLOAD WI-FI INSPECTOR Vx.xx "
( the site now appears to allow webbased emails like gmail, hotmail, outlook and yahoo now )

There is also a xirrus gadget, But that does not have all the fuctionality "DOWNLOAD GADGET Vx.xx

Alternative links - Use the links below
Do NOT use any of the download managers offered - Cnet , just use the direct link below - and click on the download button
http://www.softpedia.com/get/Network-Tools/Network-Monitoring/Xi... Read more

1 more replies
Answer Match 102.06%

I have a Dell Latitude D610 Laptop. I recently installed a new hard drive which came with Windows XP Professional installed on it . When I boot up it says New Hardware found and opens up Device Manager. It shows a PCI device and asks me to install the driver . I have tried letting the Hardware Device Manager find the software, downloaded the latest driver from the Dell Support website and tried to install it manually but Device Manager cant find any software that will work. Now when I open Device Manager there are 2 PCI adaptors shown doth with big yellow ? by them.
 

A:Wifi adaptor

14 more replies
Answer Match 102.06%

Ok so I want to hook my Toshiba laptop to the TV so I can do whatever with it in the living room.

Now there are two ways I can see one is a HDMI cable - bit messy and I really don't like having cables draped across the floor etc
The other I saw a You Tube clip on a plug in box for the TV so that I can use the laptop to the TV. However this fellow said it was "a box" - well not being Einstein or a clairvoyant I have no idea what these devices are called and hunting through my local suppliers listings I cannot find what this device is so can someone please tell me what exactly is it called??

The only concern is security of course so will my laptop signal be picked up by others close by if so I am not real sure about using this method.

A:WiFi TV adaptor

It could be a "Slingbox" or a "Boxee-Box"

That's all I can think of.

9 more replies
Answer Match 102.06%

Hi! I currently connect to the internet through a router with a wired connection. I'm thinking of setting up a wifi connection, since I got a deal on a new router that has wifi capabilities. I've been looking at wifi adaptors, and the usb type is a lot cheaper. However, most of them seem to be made for laptops. Is there a usb wifi adaptor for a desktop computer? If so, what's a good recommendation for one? Any and all responses will be greatly appreciated. Thanks.
 

A:USB WIFI Adaptor

12 more replies
Answer Match 102.06%

I need to move my windows 10 desktop away from the router and need to use an USB WiFi adaptor to connect to the internet. I have an older Belkin F5D8053 but It wont download the drivers. Win10 recognises it but cant set it up. The latest Drivers on the Belkin Web Site are the same as I have.

First, Is there a way around this to get it working?

Second, If not can anyone recommend a USB Wifi Adapter that does work with Win10

Thanks
Anotheroldgit

A:USB WiFi adaptor

Ah yes, the famous Windows 10 USB WIFI adaptor driver issue. You could try unzipping the drivers and from device manager selecting "have disk" and pointing to the inf file. But I have my doubts for success from posts like this:



F5D8053N - Windows 10 - Belkin Community

I currently have a desktop MB that has wifi on the chip and this solved my USB wifi problems once and for all. You can check this thread when I had a similar problem (post 15).
Solved USB Wi-Fi adapter not showing on tray - Page 2 - Windows 10 Forums

The D Link DWA-182 firmware C worked for me in Windows 10. You have to make sure you have the revision C model (not A). However, even with that there were issues. Windows 10 recognized it as the realtek (chip) drivers. To get the D link drivers showing up (and working) in Windows 10 I had to extract the drivers and point to them in device manager. Then they installed and I didn't have disconnect issues after that (well, most of the time).

You could try this D Link one but make sure your store has a return policy just in case. Otherwise I would suggest a search on all the adaptor manufacturers (Asus, etc) to see if their model actually has a Windows 10 driver to download. If they don't, good possibility there will be an issue.

1 more replies
Answer Match 102.06%

I need to move my windows 10 desktop away from the router and need to use an USB WiFi adaptor to connect to the internet. I have an older Belkin F5D8053 but It wont download the drivers. Win10 recognises it but cant set it up. The latest Drivers on the Belkin Web Site are the same as I have.

First, Is there a way around this to get it working?

Second, If not can anyone recommend a USB Wifi Adapter that does work with Win10

Thanks
Anotheroldgit

A:USB WiFi adaptor

Ah yes, the famous Windows 10 USB WIFI adaptor driver issue. You could try unzipping the drivers and from device manager selecting "have disk" and pointing to the inf file. But I have my doubts for success from posts like this:



F5D8053N - Windows 10 - Belkin Community

I currently have a desktop MB that has wifi on the chip and this solved my USB wifi problems once and for all. You can check this thread when I had a similar problem (post 15).
Solved USB Wi-Fi adapter not showing on tray - Page 2 - Windows 10 Forums

The D Link DWA-182 firmware C worked for me in Windows 10. You have to make sure you have the revision C model (not A). However, even with that there were issues. Windows 10 recognized it as the realtek (chip) drivers. To get the D link drivers showing up (and working) in Windows 10 I had to extract the drivers and point to them in device manager. Then they installed and I didn't have disconnect issues after that (well, most of the time).

You could try this D Link one but make sure your store has a return policy just in case. Otherwise I would suggest a search on all the adaptor manufacturers (Asus, etc) to see if their model actually has a Windows 10 driver to download. If they don't, good possibility there will be an issue.

1 more replies
Answer Match 101.22%

Hi, My wifi adaptor suddenly stopped working, but I can connect to internet with Ethernet cable.
Replaced wifi adaptor but still cannot to internet with same.............any ideas?
Regards,
John P.

More replies
Answer Match 101.22%

G'day , I purchased a wireless usb adaptor for my desktop, to that I could connect my smartphone without a usb cable, but even though I installed the disc and plugged in the adaptor , it says its disconnected, no signal strength link quality , heres a screen shot... hopefully someone can help... this is my first post,

A:wirless wifi adaptor ????

Hmm, what is your goal and what phone?

12 more replies
Answer Match 101.22%

I have a netgear A6200 wifi adaptore which seems to disconnect itself at complete random. The lights signal that it is still working and my desktop shows that I am connected but I cannot use the internet. After disconnecting and reconnecting the usb it fixes itself temporarily.

Sometime the internet stays on and sometimes I will have to disconnect and reconnect the adaptor every time I want to visit a website.

Any help would be great
 

A:Wifi adaptor problem!

6 more replies
Answer Match 101.22%

Can someone explain to me the diff between a TNC and SMA connector in a wifi antenna? A company has asked that I change out all of their wifi access points with new linksys AP's they purchased. The current AP's have a antenna connected with a cable. The cable looks similar to a standard COAX cable, but smaller. The connector is also smaller.

When I remove the standard antenna from the linksys, the plug is too large for the current cable.

I belive that I need a TNC to SMA adaptor, but I'm not sure. Does anyone know? Also, can the connectors be purchased at a hardware/electronics store, or is online the best place?
 

A:Wifi Antenna (TNC vs SMA Adaptor)

This is the TNC connector.

Here's the SMA Connector.

Note the subsection for the SMA specification that specifies the Reverse SMA, which is commonly used for most WiFi equipment antennas.
 

1 more replies
Answer Match 101.22%

Hi
I am using windows 8. My Intel wifi utility software doesn't found my network adaptor. But other than that the wifi just working fine. When I used windows 7 I didn't had this problem. Any solutions?

A:Wifi adaptor not found

  
Quote: Originally Posted by firetrix


Hi
I am using windows 8. My Intel wifi utility software doesn't found my network adaptor. But other than that the wifi just working fine. When I used windows 7 I didn't had this problem. Any solutions?


You mean your wifi software (not windows built-in utility) cannot find you wifi network?

Have you tried using the built-in utility?

1 more replies
Answer Match 101.22%

Hello
I have just bought a new USB Laptone Wifi Adaptor to use with a Zoostorm Desktop PC. running Windows XP. However when I plug in the device the screen goes blank and the PC keeps cycling through its boot process and will not complete. Is the device faulty
Thanks Ed
 

A:Laptone Wifi Adaptor

8 more replies
Answer Match 100.8%

In trying to research this issue online, I almost feel like I'm imagining things... I'm a pretty tech savvy guy but just can't figure out why I'm having this new issue..

My daughters each received a school issued chrome book (2 chromebooks in total)... They are supposed to complete all school work on them.

Pretty cool... Free chrome books... The issue arises at home. When they use the home WiFi (supported by xfinity issued WiFi rental router)... All other users are, in effect booted from their pre-existing connections... It feels like the new Chromebooks are taking a priority over WiFi connection.

Now... last year, my daughters each used a laptop (not issued by school) for their work... Last year no one lost their existing WiFi connection... The rest of the family is using windows (laptop) or android (phone) products.

In comparison from year to year there is an equal count of devices that would consume a WiFi signal.. Again.. The only difference is that two laptops were flipped to chrome books

When the girls finish their homework, everyone else can get back online...
My question

It feels like the chrome books are set up in a way such that they will have priority over consuming signal... Perhaps even trading taking a bigger chunk...

If this is the case, if I'm not crazy, is there a network setting somewhere where I could affect said priority and said consumption rate... At this point ... These free chromebooks, originally meant to increase p... Read more

A:School issued Chromebooks hogging home WiFi signal

14 more replies
Answer Match 100.38%

I've read through hundreds of posts trying to figure out my issue. Unfortunately, I've been unsuccessful.

Here's the issue, I was given a new laptop for work and it connects fine to our secure wireless network at the office, but when I brought it home it will not connect to my wireless network at home.

When I try to connect to my network at home the wireless manager sits and spins saying "trying to acquire network address". I have 2 iPhones, 1 eMachine and 1 Macbook connected to my network working fine and dandy. However, the HP laptop from work simply won't connect unless wired.

I have tried the following:
1. Uninstalled and reinstalled the driver.
2. Power Cycled my Router
3. Power Cycled my entire network
4. WinsockXPFix tool

I'm completely at a loss here. No idea what to do to fix this. I'm running Windows XP and have a 2Wire router.

I appreciate any advice anyone can give me to help solve this annoyance.
 

A:Solved: Company Laptop Connects to Secure WiFi at office but not WiFi at home

16 more replies
Answer Match 100.38%

Hi Guys,
This is Viral. I am using an Acer laptop model ASPIRE 4736 since the last five years. There haven't been much issues with it. except for the battery and thats it. But recently, since last two weeks I noticed that my Wifi would stop blinking after sometime after I start my laptop and then it wouldn't work even when I try to turn on and turn off the Wifi switch(it doesn't respond anything). I tried searching the net for this issue using my office laptop and found that a system restore would help to solve this issue. Since I remembered that I updated Java as well as there was this ad software which got installed and I had unistalled it. So I did a system restore and then when I opened the device manager, I am not able to see intel r wifi link 5100 driver on it. I tried restarting my laptop and did everything and couldn't find the driver(it was there before the system restore). But later on the same day, the driver got installed automatically and the WiFi started working but only for a couple of minutes after the restart and then it stopped. So  I did the system restore again to the date when everything was working perfectly and when i did that, again my intel r wifi link 5100 driver is not shown on the device manager(network adapters). I don't if it would automatically get installed or not but its sure that the WiFi issue still be there. So can you please help with this issue?
1. Help me get the intel r wifi link 5100 driver back
2. Help me the solve the WiFi issue... Read more

A:Issues with WiFi as intel r wifi link 5100 is not installed after d systm restor

Select Model, Select Operating System, Download your Drivers
 
There is also a hardware detection tool to assist you.
 
http://us.acer.com/ac/en/US/content/drivers
 
If the software is listed in add/remove programs; Uninstall it.
 
If the device is listed in device manager; uninstall it.

16 more replies
Answer Match 100.38%

I have a desktop that is able to have wifi it's a adapter dell 1450 UBS Wireless 802.11a/b/g it works so does the router which is a Cisco Linsky E 1000 it shows um that it works I'm getting packet but I just can't seem to connect I don't understand it says that I am connected but I cannot get on the internet what am I doing wrong please help my desktop is compaq hp with wireless capability help!
 

More replies
Answer Match 100.38%

Hi there

This USB Wifi adapter seems to be a MEGA performer --Lovely finally to be able to THINK of getting rid of LAN cables all over the place.

I've no probs with decent HD Movie streaming from a SERVER with one of these (I unplugged the LAN and inserted the USB Wifi adapter into a USB3 slot --note this needs genuine USB3 to work at proper speed). My Home router can deliver 802.11ac so no probs there.

Brilliant piece of kit and NO MORE CABLES !!!!!!. Wifi will soon be able to deliver comparable speeds to LAN especially for HOME networks. !!!

Here's the UK Link but is available in US and Europe. In any case it's delivered (in my case) by Amazon S.A.R.L (Luxembourg) so no tax !!!. even though I ordered from UK web site --they will ship outside UK tax free.

USB-AC56 | Networking | ASUS UK


Cheers
jimbo

More replies
Answer Match 100.38%

Hello fellas i need to connect my dumb Xbox 360 to live for it does not play any movies!! and asks to connect to live that i am unable to do.
OKey here is the plit-> i have a usb modem that i connect into my laptop wihch has wifi n all that now i create an adhoc n/w first on lapi--the xbox detects and connects but still test connection fails(the xbox is unable to connect to the adhoc n/w)
second i tried creating a adhoc n/w on my xbox-->lapi connects to that n/w but still the test conncetion fails on the xbox

I have checked "Allow users to use this n/w" for my USB modem connection which i use to connect to the internet In Properties-->Sharing
But here it asks to select the n/w connection out of 3 options Wireless conn,Wireless conn2,Local Area Conn.
Sometimes it shows only Wileless Conn and LAN
i tried every possible combination of all these settings but nothing is working.
The internet on my laptop works fine.
I am using Win 7 Home Premium.
I just need to connect my Xbox to my laptop wirelessely and use the internet connection my laptop is using.

i tried some manual settings of ip.subnet n dns server on my xbox n lapi, in this case the xbox connects to the network (while connection test) but does not connects to laptop.
HELP guys
 

A:Solved: wifi laptop+wifi xbox360+USB modem--->not able to connect to live!!!

13 more replies
Answer Match 100.38%

I've had experience this problem for a while now on my newly built windows 10 rig. Every few hours, my Wifi simply stops working; the connection is lost. Sometimes it reconnects after a minute or so. Most of the time, I would need to manually disable/enable the wifi adapter in my Network Settings to get it back up again.

It happened with a relatively expensive adapter that I bought not to long ago - Netgear A6210 USB 3.0 dual-band wifi adapter. I found a thread about this issue here. I've not been able to resolve it with any of the tips provided (including downloading a generic 3rd party Mediatek driver). I've used this same adapter without this problem on my older Win7 machine. I thought maybe this adapter "went bad".

So I tried to replace this adapter with an older Wifi adapter made by Rosewill, using older Rosewill drivers. The same issue occurs. (Again, this Rosewill adapter worked perfectly in my Win7 system) So I have a hunch the problem is Windows 10 itself. Does it not place nicely with existing or older wifi adapters on the market? Would I need to buy a new adapter specifically certified for Windows 10?

Anyone have any insights on this would be greatly appreciated.

More replies
Answer Match 100.38%

Hello,

I have recently bought a new pci wifi lan card (Ralink rt61 turbo) and have plugged in and installed drivers. Initially the drivers the company I bought it from told me to install didn't work, but after some googling found the correct drivers and downloaded from Ralinks website. However these didn't work either.

When using the Ralink wireless utility it says that the card is disconnected, however in device manage it is both connect and the correct drivers installed and everything is perfectly fine.

I ignored the wireless utility and hoped that windows 7 would still be able to use the wireless card as past experiences have shown to be true. This case however I get nothing. Windows 7 says that the wireless card is experiencing problems, it doesn't show any of the routers that should be shown.

I have been looking around a lot and there have been several drivers that should have worked and they haven't.

I would have thought that the antenna is broken or the card doesn't work however when I use it with ubuntu instead of windows 7 it works perfectly fine without any hassle, so the card is definitely working.

Any advice that anyone can give on how to resolve this would be very welcome.

Thanks

Aieden

A:Ralink RT61 WiFi Lan card, windows 7 not receiving any wifi signals

Have a look at this thread.

Ralink RT61 Turbo Wireless Driver

3 more replies
Answer Match 100.38%

When i was using windows 8 the wifi was good and would never get disrupted.But i updated to windows 8.1 and now when am downloading something the wifi gets disconnected and wont show the network even if the router is on and my phone is still connected to it.I have to toggle the wifi on and off for some 6-7 times and then toggle airplane mode on and off for 3-4 times to get it to discover the network.Is this because of the adapter or driver and my laptop has a ralink wifi adapter.What should i do?Thanks

A:Windows 8.1 wifi issue ralink wifi adapter and envy 15t j001...

Goutham, Welcome to the HP Forum. You might try the following Ralink driver for Windows 8.1 :sp63945 Mediatek - alink 802.11 WiFi Adapter V5.0.34.0 - Win 8.1 [Devices] (Hardware Ids)PCI\VEN_1814&DEV_5390="Ralink RT5390 802.11b/g/n WiFi Adapter"PCI\VEN_1814&DEV_539F="Ralink RT5390 802.11b/g/n WiFi Adapter"PCI\VEN_1814&DEV_3592="Ralink RT3592 802.11a/b/g/n WiFi Adapter"PCI\VEN_1814&DEV_3090="Ralink RT3090 802.11b/g/n WiFi Adapter"PCI\VEN_1814&DEV_539A="Ralink RT5390R 802.11b/g/n WiFi Adapter"PCI\VEN_1814&DEV_539B="Ralink RT5390R 802.11b/g/n WiFi Adapter"PCI\VEN_1814&DEV_3290="Ralink RT3290 802.11b/g/n Wi-Fi Adapter"PCI\VEN_14C3&DEV_7630="Mediatek MT7630E 802.11bgn Wi-Fi Adapter "Your computer's webpage does show a few drivers for Windows 8.1:HP ENVY TouchSmart 15-j001tx Notebook PC Drivers  Hope this helps. Click the Kudos Star!It is a great ?Thank You? to the HP Experts who are here to help!

9 more replies
Answer Match 99.96%

Hi, I have a Gateway NV52L15 notebook and I am having problems with my WiFi access. I have Windows 8. My wireless networks are not showing up. When I troubleshoot the network adapter, I get a messAge that reads that my wireless capability is turned off. When I go to the Gateway Device fast lane, my WiFi is on. But when I look in networks it as shows WiFi off and I am unable to turn it on that way. When I go to wireless devices in pc settings, the toggle button for the wire device is grey, therefore I am unable to switch it on- It used to work.

Also, while in the Gateway Device fast lane, when I press the F3 key the airplane mode goes on...the WiFi goes off...by comes right back on. Please help...

More replies
Answer Match 99.96%

Wifi not connected and wifi button stay orange what I do tu resolve this problem... im so ............ plz help I try many mathods but they didn't work .........I need my wifi back....

A:wifi button light stay.orange and wifi.not connected

And I have HP 1000 notebook PC......

1 more replies
Answer Match 99.96%

So for the past day or so im trying to get the WiFi working on this laptop,didnt succeeded yet. I tryed the f10,f9,f10 ,not working.  HP Wireless Assistant doesnt eaven have any options in it when i instal him. Tryed to manualy instal drivers says its up to date and still not working.Name of the wireless adapter is Railink RT3090 802.11b/g/n WiFi Adapter. Hardware IDs:PCI\VEN_1814&DEV_3090&SUBSYS_1453103C&REV_00PCI\VEN_1814&DEV_3090&SUBSYS_1453103CPCI\VEN_1814&DEV_3090&CC_028000PCI\VEN_1814&DEV_3090&CC_0280  So any help would be nice.Ty in front,CroMatt  

A:WiFi button not working,WiFi option in mobility center is gr...

Hi To see what drivers are in use, you can try... Open a Command Prompt window as an administrator, and type....  netsh wlan show drivers C:\WINDOWS\system32>netsh wlan show driversInterface name: WiFi 2    Driver                    : Realtek RTL8723BE 802.11 bgn Wi-Fi Adapter    Vendor                    : Realtek Semiconductor Corp.    Provider                  : Realtek Semiconductor Corp.    Date                      : 21/09/2015    Version                   : 2023.18.814.2015    INF file                  : C:\WINDOWS\INF\oem35.inf    Files                     : 2 total                       ... Read more

1 more replies
Answer Match 99.96%

Hi All,

I am new to this forum..few day agai got to know that I can make my Windows 7 Laptop a HotSpot via Virtual WiFi...so I tried to make my laptop hotspot and the same can be detected from my iPhone also...i can connect connect iPhone to my laptop...but i cant access any internet..
i have also tried putting off my firewall but with no use....
can somebody help me out with the same?
 

More replies
Answer Match 99.96%

Hi, My laptop has a very weak wifi detection. Only when the wifi signal is very strong can it detect the wifi. I tried contacting HP regarding the same. They said it could be a loose connection with the wifi antenna. I have been waiting for the custumer service in my area to contact me(like HP promised!!!) for quite a long time now . Now I am in urgent need to get this fixed. I was wondering if an external wifi adapter would solve this issue. Mine is a Windows 10 laptop. Model no: ab030tx (pavilion). If an external adapter works, what would you suggest? (I am confused as a lot of products available in market only convert the laptop to a hotspot) 

A:Weak WiFi detection of laptop: will an external wifi adapter...

Dear Customer, In case if your laptop is under warranty, You may call  HP and will replace the Wireless card.Contact HPhttp://support.hp.com/us-en/checkwarranty However you may still use the External WIFI USB Adapters, I would like to share a document which helps how to choose the required Adapters.http://www.howtogeek.com/243330/how-to-choose-a-usb-wi-fi-adapter-for-your-laptop/ After trying you may search the model of the adapter online with Amazon for price details. Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee  

1 more replies
Answer Match 99.96%

I upgraded my friends HP laptop to Windows 10. The issue now is I can't enable Wifi. The card is recognized correctly in Device manager and no issues is found with it. It looks like it is fine. However in the Network Settings WLAN is set to "Off" and when I try to turn it on it always jumps right back to off. eg. I can't enable it.

HP is now help as they clearly state any laptop bought prior to specific date in 2013 will not get any driver updates from their side for windows 10. (Guys, never buy HP again please...). And updating through device manager only tells me it's the newest driver available.

The Wifi card i Broadcom 4313GN card. I searched for win 10 drivers but did not find anything.They only offer linux drivers on their homepage...

So can anyone either provide a solution to the issue or link to a win 1' driver for this wifi card?

A:Dreaded Win10 WiFi Issue: Can't enable WiFi after Upgrade

I had a similar issue were I was stuck in Aeroplane mode on a cleanly installed W10. Turned out I had to uninstall it from the HID's in Device manager. It's worth checking that he's not stuck in it too. Search for drivers in Windows 7, from the HP website and you'll most likely resolve the issue.

0 more replies
Answer Match 99.96%

Hello,

i just received my new PC with a brand new Gigabyte UD3H Wifi motherboard and a HD7950 GPU.

I installed all the drivers available from the Gigabyte website for some reason the wifi function simply does not work. Also, the screen plugged into the 7950 works fine but the other screen connected into the motherboard gets the message "no signal detected".
How can i fix this?

A:Gigabyte UD3H Wifi doesn't detect WiFi or second screen

Also, when I try to install the VGA drivers from gigabyte, I get the message "PC does not meet minimum requirements"

1 more replies
Answer Match 99.96%

I am considering using a powerline system to give me additional wifi cover, but I am unclear how the available wifi connection is protected. They make a great deal of encrypting the traffic over the power circuit, but no mention is made of protecting the wifi connection. Surely, the risk with these is the same as with a wireless router?

Anyone got any experience of this?

A:Wifi over Powerline - security - e.g. Devolo dLAN 500 Mbps WiFi

They did a review of it here Devolo dLAN 500 AV Wireless+ Review | Expert Reviews.

In the review they mention it comes with a default password that you can change later.

1 more replies
Answer Match 99.96%

from device manager network controller is yellow
this is windows 7 64 bit
dell latitude e6410

tried to install below drivers , all of them did not install need help
Network_Driver_WD35F_WN_5.100.235.12_A37.exe
Network_Driver_3MNPT_WN_15.10.0.10_A06.exe
NIC_DRVR_WIN_R254689.exe

A:wifi icon is red cross, also wifi light on laptop does not show up

Hi Welcome to Seven Forums ... Select the Network Controller Right click select Property's ...

Then the Details Tab and Post any Info it says there ...

9 more replies
Answer Match 99.96%

Dear Forum, I have not used the forum before and I am not very technically minded I have seen several posts and replies from members who have been dealing with a similar problem to me and I believe I have tried the solutions posted but nothing has worked so far. I have a Compaq Presario CQ57-480SA Notebook PC - Model #: B1V34EA I think it was bought in 2012. It was running Win 7 and worked properly but I upgraded to Win10 in July and since then (and despite a complete re-install) there is no wireless functionality at all (no wireless icon, etc). The physical wireless switch will not do anything except turn 'Airplane mode' on and off. I have surfed various websites and the HP site and think that it maybe the wireless adapter but I am not sure. I think my wireless adapter is aManufacturer: Realtek Semiconductor Corp.Description: Realtek RTL8188CE 802.11b/g/n WiFi AdapterDriver version: 2013.12.720.2015Driver date: 7/20/2015Physical address: ?20-10-7A-5F-DB-8DFile version: 2013.12.1117.2014 I downloaded Piriform Speccy to identify my laptop's components in case this helps:Operating System - Windows 10 Home 64-bitCPU - Intel Celeron B810 @ 1.60GHz  - Sandy Bridge 32nm TechnologyRAM - 8.00GB Dual-Channel DDR3 @ 665MHz (9-9-9-24)Motherboard - Hewlett-Packard 3672 (CPU1)Graphics - Generic PnP Monitor ([email protected])Intel HD Graphics (HP)Storage - 465GB Seagate ST500LM012 HN-M500MBB (SATA)Optical Drives - hp DVDRAM GT50NAudio - Realtek High D... Read more

More replies
Answer Match 99.96%

I was at a home today and connected to their private home network on a Surface Pro 4. This showed their network as Connected. However, the internet kept going to a local open BT network instead! I couldn't select this open network anywhere to exclude it. Thinking about it now, I should have disabled/reenabled Wifi first, and then tried a reboot after that. But otherwise, is there any hidden setting to ignore certain networks?

A:Using 'open' access Wifi point instead of connected private wifi.

Hello and welcome to the TenForums

If the home where you were had a BT hub then it most probably was offering both an open connection also known as BT Wifi or BT Fon and also a secured wifi connection which would have an SSID number with a BThub name with some random numbers and letters. It is possible that you connected to the open one and were then automatically directed to a BT broadband page on the internet to pay for use of the BT hotspot service that they provide via customers routers. See this article for more info: http://bt.custhelp.com/app/answers/d...fi-with-fon%3F

0 more replies
Answer Match 99.96%

'Hello, this is my first post here, so I am sorry if anything is confusing.

The reason why I signed up in this forum is s I can seek help fron those that might know more about computer than me, in order to solve my problem

A few days ago, my laptop was working perfectly fine. But then, I turned my computer off, the next day, everything started up as normal, with Windows 7 Home Premium still in the backgrounds when I am logging in but then, the network connecter won't automatically start. So I was left without internet for a bit. Whats more, I noticed that the taskbar, which was always semi-transparent before, is now white. As well as all the title bars of the programs that I open, turned into blue!

Is computer has always ran Windows 7 as far as I am aware, but e way the taskbar, and the title bars, are behaving, reminds me of windows xp.

I first tried to look up how to solve my wifi problem. I manually opened the network connecter in the control panel, and tried to "Connect to a network". But it didn't detect any wifi servers! Which is odd since I had always used the one my family used, and I am using wifi on that server at this moment!

When I tried to use troubleshoot on my "internet connections", it first showed me that the issue was "The Diagnostic Policy Service is not running" but then every other time I tried to troubleshoot again, it doesn't show any problems detected

And with the problem of the taskbar, I tried to search solution... Read more

A:Taskbar turned white and wifi unable to detect wifi

  
Quote: Originally Posted by Zero


'Hello, this is my first post here, so I am sorry if anything is confusing.

The reason why I signed up in this forum is s I can seek help fron those that might know more about computer than me, in order to solve my problem

A few days ago, my laptop was working perfectly fine. But then, I turned my computer off, the next day, everything started up as normal, with Windows 7 Home Premium still in the backgrounds when I am logging in but then, the network connecter won't automatically start. So I was left without internet for a bit. Whats more, I noticed that the taskbar, which was always semi-transparent before, is now white. As well as all the title bars of the programs that I open, turned into blue!

Is computer has always ran Windows 7 as far as I am aware, but e way the taskbar, and the title bars, are behaving, reminds me of windows xp.

I first tried to look up how to solve my wifi problem. I manually opened the network connecter in the control panel, and tried to "Connect to a network". But it didn't detect any wifi servers! Which is odd since I had always used the one my family used, and I am using wifi on that server at this moment!

When I tried to use troubleshoot on my "internet connections", it first showed me that the issue was "The Diagnostic Policy Service is not running" but then every other time I tried to troubleshoot again, it doesn't show any problem... Read more

9 more replies
Answer Match 99.96%

I am looking to replace my tired Linksys WRT54G router that is about 10 years old. I love the router, and its even better with DD-WRT on it, but I'm starting to have troubles with the wifi dropping all the connects for a couple seconds when running all my wireless devices. I have 3 smart phones, 2 tablets, 1 Chromecast, a smart TV, and Roku + a laptop or 3 in my house right now, and it seems like its getting to be a bit much for it.
I have had to completely re-flash the firmware twice this year to get the wifi working again, so I'm thinking its time for replacement.
I have been thinking about just getting the new WRT54GL for $50, but I'm also thinking it might be a good idea to upgrade the wifi technology past wireless G .
I'm wondering if my Tablet (Nexu 9), and our smartphones (Razr HD Max) along with the Chromecast will take advantage of the new wireless standards and higher speeds or not? If they will can someone recomend a decent wireless router that takes DD-WRT nicely in the sub-$100 range? Thanks!
 

A:Looking for new Wifi Router - Will Tablet/Smartphone take advantage of new wifi Standards?

I been programming in Android/Linux since 2010 and there is code that supports VHT is Very High Throughput. Right now the standards are HT is High Throughput .

As for DD-WRT firmware is like your overclocking your router pushing it beyond the OEM limits. I use to use DD-WRT but had quit many years ago since the routers that used that firmware would fail too much.

So best to buy a better business type enterprise router wired then you can use WiFi router as AP or just get WiFi AP(access point). To me WiFi Router is also Wired Router, but to use just a wired router and use WiFi AP through a switch is better. If one or the other goes you can easy replace them. Where as if the WiFi Router fails you would need to replace it.

If you really want to use DD-WRT then Look at Buffalo WiFi Routers some come pre-installed with DD-WRT on them. Frankly you really don't need DD-WRT today because newer routers or WiFi routers are much better built and offer much more power NPU = network processor units and 128, 256, 512, 1GB of RAM some have Dual Cores.
 

9 more replies
Answer Match 99.96%

hi
i have two wifi networks,
wifi 1 >> is on 192.168.1.x ip scheme and windows connects to it fine,
wifi 2 >> is on 192.168.43.x ip scheme
and when i disconnect from wifi 1 to connect to wifi 2, windows still shows old ip scheme of 192.168.1.x ip address and i cannot connect to wifi 2 properly. I have to set its ip address manually and then only i can access that network. other devices (phone, tablet) connects fine while switching from wifi 1 to wifi 2, so dhcp is working fine on both wifi.
any suggestions welcome.
thanks

A:switching from wifi 1 to wifi 2 doesnot assign proper ip address

  
Quote: Originally Posted by roshanrbb


hi
i have two wifi networks,
wifi 1 >> is on 192.168.1.x ip scheme and windows connects to it fine,
wifi 2 >> is on 192.168.43.x ip scheme
and when i disconnect from wifi 1 to connect to wifi 2, windows still shows old ip scheme of 192.168.1.x ip address and i cannot connect to wifi 2 properly. I have to set its ip address manually and then only i can access that network. other devices (phone, tablet) connects fine while switching from wifi 1 to wifi 2, so dhcp is working fine on both wifi.
any suggestions welcome.
thanks


I couldnt understand your Problem Completly.
But as per me researving IP address for your Computer in the Next router would solve your Problem.
Also please check if the router 2 has DHCP enabled in it.

3 more replies
Answer Match 99.96%

Hey guys,

So, what i'm trying to do is create a wifi hotspot using my computer. In other words, turning my computer into a router. I'm wanting to do this so i can use my ipod at home instead of only when i'm around other wifi hotspots.

My computer is running off of a wired router, so that i can play online on my PS3 as well. I was told wifi doesn't work well with Ps3's normally so i just bought a wired router. So, the mainline internet cord is plugged into a wired router and then another line runs into my computer.

For some reason, after i make an adhoc connection, the computer is not sending the required information to the iPod so that it connects to the internet.

I've tried entering in the information into the Static tab in my ipod as well, and still only get Local Connection instead of Local and Internet.

This is what my connection looks like through the router using ipconfig /all:


Code:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\Kyle>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Crommy
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : twinvalley.net

Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
... Read more

A:Creating Wifi hotspot with built-in computer wifi card.

Hi Cromsy,

Welcome to Vista Forums!

Unfortunately, it isn't as simple as that. You are connected to the router fine with your computer, but that tells us nothing about the ipod because wireless is off (but that's not the whole story either - you need something extra to do what you want). The following article should tell you what you need and how to do it: How to Connect iPod Touch to Windows 7 Ad-hoc Wireless Network. Although it says Windows 7, there are procedures for Vista as well (and the software will work with Vista).

I hope this helps.

Good luck!

3 more replies
Answer Match 99.96%

I am currently stationed in Germany, and live in a village that has horrible internet. I cannot stream netflix, hulu, and downloads take several hours.

Is there a way to combine the internet that my cell phone receives and the wifi router I have at home to increase speed?

I have the ability to create a wifi hotspot from my cell phone if this helps.

Just something I thought up in my head, and wanted to find out if it is possible. Thanks in advance.
 

A:Combining Wifi Hotspot and Router Wifi for faster internet

You can, try this http://www.octopusplus.com/download.jsp or http://www.connectify.me/
 

1 more replies
Answer Match 99.96%

Hi, I have a XPS 13 9343 (i5/QHD) purchased refurbished from 3rd party, recently installed clean W10.
The Dell tool indicates to me that I should be installing:
9343_Network_Driver_WD22T_WN32_7.35.333.0_A03.EXE
Installing I get failure log at the bottom.
Via Device Manager as mentioned the WiFi adapter under Network is not there, scanning for hardware changes does not help.
I have tried manually installing inf files but I don't get any options under "Model" when I try to install it through legacy hardware.
I'm starting to think the Wifi/Bluetooth component is either faulty or entirely missing from the vendor (I have not opened it up and wouldn't know how to diagnose this myself).
I've attached a separate wifi dongle which works as does connecting to Ethernet via a USB adapter.
Any other ideas of what it could be? Thanks.
---
[05/09/16 11:58:38] Update Package Execution Started[05/09/16 11:58:38] Original command line: "C:\Users\Yegor\Downloads\9343_Network_Driver_WD22T_WN32_7.35.333.0_A03.EXE" [05/09/16 11:58:38] DUP Framework EXE Version: 3.4.1.76[05/09/16 11:58:38] DUP Release: WD22TA03[05/09/16 11:58:38] Initializing framework...[05/09/16 11:58:38] logo.png[05/09/16 11:58:41] User Command: attended[05/09/16 11:58:41] DUP Capabilities Value: 35651583 (0x21FFFFF)[05/09/16 11:58:41] DUP Vendor Software Version: 7.35.333.0[05/09/16 11:58:41] Local System/Model Compatible w... Read more

More replies
Answer Match 99.96%

hello.

i have cable internet that is connected to a belkin wireless router. one computer gets slow internet access when connected to this. multiple other computers get better speed. the one affected computer gets fast speeds when accessing the internet at other locations, like a friend's house. also, the affected computer gets fast speeds when connected to the router by a cable.

so the problem seems to be very specific to the connection between these specific devices.

the laptop in question is a thinkpad e420 running windows 7.

thank you in advance for any solutions or suggestions you might have.
 

A:Solved: slow net with 1 computer and home wifi, but not other computers or other wifi

10 more replies
Answer Match 99.96%

guys i have a strange problem with my WiFi lately
yesterday the my laptop lost the connection to my WiFi modem and when i tried to search it my laptop not find any WiFi modem but the other device such as: my smartphone detect it normally. but after that, i tried windows troubleshooting and it found that "you've lost your internet connect" and suggest some way to solve this problem, i followed the instruction and voila, my internet connection appear again but next 4 hours, it's dead again, i went to troubleshooting and it worked fine again.
so guys please help me to solve this annoying problem...
thanks before
 

More replies
Answer Match 99.96%

Hi

I'm having wifi problems with my lappy, but I can't figure-out whether it is hardware or software. There is evidence to suggest that recent versions of Windows 10 have been causing wifi problems. If the problem _is_ with Windows and they are going to fix it, then I can stop worrying about trying to fix the hardware (I am travelling abroad and it is near-impossible to find expertise/parts/tools).
Gory Details:

System: Levono Yoga2 Pro laptop. Intel Core i7-4500U. 8GB RAM. Windows 10 64 bit.
I have been using Windows 10 since it came out without any problems. I have been keeping it updated.

Precursor to this problem: On 4th November 2016, mid-session, apropos of nothing, my wifi stopped seeing the wifi network it was connected to; or any other wifi networks. (My phone could see plenty). This was evidenced in the Taskbar, Action centre, Settings dialogs of the PC. The Windows version was upto date at the time, but downloading the next week's Microsoft Patch Tuesday updates (9th Nov) fixed the problem. System working AOK. Yay.
(MS update: KB3200970 "Addressed issue with the system tray showing no Wi-Fi connection even when Wi-Fi is present")

System fixed - I made a system-restore point.

The "fix" held for 24 hours, then a new, more severe problem started occurring (='the current problem').

Current problem: After 3 to 5 hours of normal, troublefree operation, the PC stops seeing the wifi entirely. Any menu options associated with wif... Read more

More replies
Answer Match 99.96%

Hi All, I am new here, as well as a novice to Windows,,, Here is my story-

My Network card is showing up in the Device Manager but has an exclamation mark through it. I update the driver thinking that was the issue and the update would not install, also effecting the other network Adaptor,, so Wifi does not work, well for the computer that is.. I've tried EVERYTHING...Friends have downloaded this and that, to no avail.Also having issues with NVDIA GeForce not updating or cooperating, says it failed on the "back end"? Let me get some other info,, here is what I have so far-
Thank you in advance-

I will post a few other specs

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Home Premium, Service Pack 2, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz, Intel64 Family 6 Model 15 Stepping 11
Processor Count: 4
RAM: 4094 Mb
Graphics Card: NVIDIA GeForce 8600 GT, 512 Mb
Hard Drives: C: Total - 332595 MB, Free - 207292 MB; D: Total - 10801 MB, Free - 1039 MB; E: Total - 343397 MB, Free - 138353 MB;
Motherboard: ASUSTeK Computer INC., Benicia
Antivirus: avast! Antivirus, Updated and Enabled

From System Information- Conflicts
I/O Port 0x00000000-0x00000CF7 PCI bus
I/O Port 0x00000000-0x00000CF7 Direct memory access controller

I/O Port 0x000003C0-0x000003DF Intel(R) G33/G31/P35 Express Chipset PCI Express Root Port - 29C1
I/O Port 0x000003C0-0x000003DF NVIDIA GeForce 8600 GT

IRQ 23 Intel(R) ICH9 Fami... Read more

A:No WIFI and Network Adaptor Issues

Motherboard: ASUSTeK Computer INC., BeniciaClick to expand...

You appear to have a HP/Compaq brand computer.

What model name and model number is it?

What's the part/product number(P/N) on it?

----------------------------------------------------------
 

14 more replies
Answer Match 99.96%

I upgarded my HP2000 Windows 7 laptop to Windows 10. My Wifi has stopped working. I have Realtek rtl8188ce 802.11b/g/n wifi adapter on this machine. Is this wifi adapter compatible with Windows 10? What are my options? 

More replies
Answer Match 99.96%

I have a T61 7665-AC2 with an Intel wifi link 4965 adaptor.  Since I installed windows 8.1, the laptop boots with limited internet connectivity.  I have to run the network diagnostics which resets the adaptor and it is fine.  Until the next time I boot the laptop.  I have driver version 13.4.0.139.  Windows says it is the latest one, but I found 14.03 on the Lenovo site...except it isn't for windows 8 and it won't install and says Access is Denied (but I am the admin on the PC).  I tried the Intel site but it says my adaptor is no longer supported.   Any ideas?  Thanks!










Solved!
Go to Solution.

A:WiFi Adaptor problems with Windows 8.1

Intel 4965AGN is not supported in Windows 8. I have the same issue, except my connectivity is fine but I get random BSOD's involving 'netwlv64.sys'. If you search Google for 'netwlv64.sys windows 8' you'll find tons of people with the same issue. In my case, it's even worse now in 8.1 than it was in Win 8. I've read that some people have had success installing the Vista driver, but also that this creates other (reliability) issues. Your best bet is simply to purchase a new wifi card. I ordered an atheros card from eBay a couple of weeks ago, but haven't received it yet. Note that if you do purchase a new, non Lenovo approved, wifi card, you will first have to install the Middleton BIOS to remove the "Whitelist".

9 more replies
Answer Match 99.96%

Hello,

I have a Dell Inspiron with Windows 7 and am 'a newbie.'
I have followed the directions on setting up the Virtual Wifi but have an error. Is there anyway to erase what I have done and start all over again?
Keeping in mind: will starting over reset the text box so it is editable?

Thank you,
Ral32

A:Virtual Wifi Adaptor issue

Your LAN connection may be disabling the Wireless, hence the problem. Open Wireless Network Connection (the one on the right) and go into Properties - Configure - Advanced - see any options that would disable Wireless when LAN is connected.

2 more replies
Answer Match 99.96%

I tried enabling my wifi adapter but it says enabling then enabled but is still disabled.

Pls Help.
 

A:Solved: Wifi Adaptor Problem

6 more replies
Answer Match 99.96%

My newly installed Windows 7 will not recognise my WiFi USB adaptor unless I unplug it and re-connect it. It then works fine. The drivers appear up-to-date. How can I get Windows 7 to recognise it automatically when I first switch on. Thanks.
 

A:WiFi adaptor not recognised by Windows 7

Check the settings in Device Manager and disable ANY power saving features of the adapter.
 

3 more replies
Answer Match 99.96%

I have always connected to the internet via a external USB WiFi adapter. Now I need to connect to the one that is built in to my mother board. I went to Device Manager and Enabled it, but it isn't discovered. Do I need to do something else.

And when I connect to it, finally, how do I make sure its a 'private' network and not public.

Thanks in advance for any help.

TRS

More replies
Answer Match 99.96%

HIMy HP250G3NOTEBOOK network adaptor won't connect to our home WiFi but other devices can still connect. I have tried disabling and enabling the network adaptor, making sure air plane mode is off, refreshing the PC, restarting the router and troubleshooting the network adaptor. I have also followed the steps on the HP network and troubleshooting. The WiFi can only connect if I plug in an Ethernet cable, but it is very inconvenient.  Thanks,Vanesia.

More replies
Answer Match 99.96%

Hi, I think I have a hardware problem with my wifi adaptor and can I have a way to fix it? my warranty has expired. ========I have a yoga pro 2 for less than 2 years I think. (SN:YB05217756) Yesterday, the wifi adaptor suddenly disapper, i cannot connect to internet and the wifi device is not available in the device manager any more. I try to reset the PC and also update to the latest interl wireless wlan software from lenovo website.  It doesn't help at all. The win10 also report ethernet 2 not connected.

More replies
Answer Match 99.12%

how can i turn on/off wifi capability without function key and wifi button.plz inform me.thanks

A:how can i turn on/off wifi capability without function key and wifi button.?

You can go to Control Panel--> Network and Sharing Center --> and then click on "Change Adapter settings" on the left side.  Once here you can then right click your Wireless Adapter and select DISABLE.  Be kind and Mark as Answer if I helped.

11 more replies
Answer Match 99.12%

hello,


iam using windows 7 professional 32 bit. my laptop is hp elitebook 2560. my laptop is capturing signal, i am able to connect to internet also. But in wifi icon,on wifi bar cross mark is showing up.

A:wifi signal bars not showing but connected to wifi

Do you have another user account on this computer? Are you able to see the Network indicator in the notification toolbar on that account? Follow the steps in this documentto create a new user account. If you do find that the icon is in the notification taskbar, you may also use those steps to recover from a corrupted user profile.
Let us know if this helps.

1 more replies
Answer Match 99.12%

I have two Lenovo N586 laptops. Both of them will reconnect to our home wifi on their own. I have disconnected. It reconnects. I have disconnected and changed the tick to connect automatically. It reconnects. Did those things plus turned off wifi antenna. The wifi turned itself back own and reconnected. I did the latter plus turned on airplane mode. The machines turn on the wifi antenna and reconnect anyway. When looking at the airplane mode tick it is still on but the machine is online.
 
I restarted the router and changed the login code. That allowed me to "forget" the network. However, when it was still looking to get online. If I entered the new credentials the same trouble starts.
 
These machines share the same wlan with data sharing. They also use the same login for Google Chrome so that we both have access to the same bookmarks, etc. 
 
  
 
I set it like the above shot and 30-45 seconds later it looks like this. Airplane Mode on but trying to logon to wifi.
If I had not "fogetten the network and changed the password it would then log on.
 
Any ideas? Thanks in advance for the help.

More replies
Answer Match 99.12%

Although I am connected to our wireless network on the Folio 13, there is no internet connection. I can, however, connect to the internet via Wifi on two other household laptops, both of them HP, so I believe the problem is with the Folio itself. I can also connect to other computers on the network on the Folio, but something is preventing it from getting on the internet. I can only get the internet via hardwired ethernet connection on the Folio. I have tried the following fixes, multiple times, without success: -Run the Windows troubleshooter for Internet/Network. It says the connection between your access point, router, or cable modem and the internet is broken. (But not on other wifi computers here--works fine.)-Reboot/Reset the modem.-Disable/Renable the wifi adapter (Intel Centrino Wireless N 1030)-Update wifi adapter driver (it says driver is up to date)-Uninstall/reinstall wifi adapter-Remove Wifi Network from list of available networks; reboot, add this network back in-Roll back all Windows updates from the past month-Searched self-help forums for a possible solution And yes, the wifi keyboard light is blue, not orange. Can someone help please?

A:No internet connection on Folio 13 laptop via Wifi but Wifi ...

Hi A visual reference point... From your description the fault is either with an app or hardware issue.  But if you follow the paths you may actually find the correct resolution. AAND I doubt I can can come up with anything new, but confirmation of the settings from your description, may help me to. So as an administrator, in a Command Prompt window (or copy and paste the whole netfixer.bat) short version... C:\WINDOWS\system32>getmacPhysical Address    Transport Name=================== ============================================48-E2-44-54-66-27   \Device\Tcpip_{F5FF31F1-C343-42B0-B6A9-BD17E49ED64C}B0-5A-DA-DE-84-28   Media disconnected48-E2-44-54-66-28   Media disconnected 1x Wi-FI, 1 x B/Tooth & 1 x Ethernet ----------------------------------------C:\WINDOWS\system32>netsh wlan show interfacesThere is 1 interface on the system:    Name                   : WiFi 2    Description            : Realtek RTL8723BE 802.11 bgn Wi-Fi Adapter    GUID                   : f5ff31f1-c343-42b0-b6a9-bd17e49ed64c    Physical address       : 48:e2:44:54:66:27  &... Read more

1 more replies
Answer Match 99.12%

I have been trying for some time to accomplish the title result. I'm not techie enough to do it.

What I want is to be able to use a Tablet to read in the rear of my home (which is out of range for incoming wifi signal.)

If I can set up the computer to do this, I will cable connect to a router in that area.
I have two computers and could use either.

1.a PC running XP (should update to windows 8.1, but have never bothered to do that, since XP works just fine. (I had this computer sharing to the router, when I had DSL internet connection, using Windows wizard to set it up) Couldn't get it to work when I switched to WIFI internet access) I could switch to win 7 or 8.1 if that would help.

2. a Lap Top running WIN 8.1,

Any help is appreciated.

More replies
Answer Match 99.12%

Hi! After moving to a new home, I'm having trouble getting a wired connection working. Same modem and router as the previous home, same PC. Different ISP, but both are Shaw cable re-packagers.

router
CISCO Linksys E900, Factory Reset, with latest firmware 1.0.06
modem
THOMPSON DCM 475

motherboard
SAPPHIRE Pure Black P67 Hydra
USB adapter
USB wifi, Dlink DWA-160
Operating system
Windows 7 64
Ethernet Adapter
Marvell Yukon 88E8057 Family PCI-E Gigabit Ethernet Controller
latest driver version 11.45.4.3

I have only a PC and an android connected, occasionally and android tablet as well.

The PC can connect via wifi, if ethernet is disabled and then modem, router, PC restarted, but I can't seem to figure out a way to get the ethernet connection to work. I've tried DHCP and Static IP configurations, and I've tried connecting the ethernet directly to the modem instead of the router, but to no avail. I believe I've managed at times to access the router from the PC (only with static IP), but never the internet as well. I've tried 3 cat 5 cables as well.

Here are some pictures with more details of my config

I've been banging my head against this for 8+ hours...can anyone see what I'm missing?

More replies
Answer Match 99.12%

i am using my HP Pavilion g4-2309tx about years.it is performing very well since last year.But two days ago i found that wifi in my laptop is not working and the wifi adaper rt3290 of my lapter overheating very badly.can anyone give me the solution of this problem?
my pc configuration is:
HP Pavilion g4-2309tx Model#4B12PA [personal information removed] os:windows8.

A:rt3290 wifi adapter over heating and wifi is not working

What led you to the assumption that the WLAN card in the notebook is overheating?  Have you previously had any problems with the WiFi?  Have you made any changes or software installations lately?

1 more replies
Answer Match 99.12%

Hello , ihave an HP pavillion G71 340us that uses wifi link 1000 BG. I have my wifi drivers installed properly and everything set accordingly but when ever i turn on it on i cant see any wifi signals or any wifi at all to connect to . I am able to use a usb modem to connect to the internet but i cant use wifi because it doesnt show me available wifi to connect to.

A:My wifi card doesnt receive wifi signals

Dear Customer, Please try the below troubleshooting:http://hp.dezide.com/ts/start.jsp?guide=wirelessconnection.net&section=social   Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

1 more replies
Answer Match 99.12%
A:wifi low signal & can't detect any wifi after upgraded windo...

Same issue is with my system as well Product Name-- HP 240 G4-328TXOS-- Windows 10, 64 bits. Somebody please reply ASAP  Thanks 

5 more replies
Answer Match 99.12%

Hi there! I would lik e to inquire on how can I fix my laptop. I can't connect to the wifi network. Plus I can't upgrade the driver because the driver isn't showing in device manager. Plus, my track pad is also not working. Help please. Thank you in Advance

A:HP STREAM 11 d002tu Wifi Not Working. Windows 8.1 My Wifi ca...

Hi First of all there is an option in Device Manager; VIEW; Show hidden devices  The faint entries are hidden, like my Zyxel G202 because it is disconnected.   Also.... As an adminstrator, in a Command Prompt Window, typegetmacThis will list MAC addresses for those items that are present, and may not be connected.A good number would be 3,1 x Ethernet1 x Wi-Fi1 x Bluetoothand then typeipconfigand in the long list look for named devices have a matching MAC address.Along with Device manager this is a way to determine the number of devices. additionally type netsh wlan show driversnetsh wlan show interfaces and report the results please.



Happy 2 [email protected]

1 more replies
Answer Match 99.12%

This is my first time posting so i hope its in the right place. Here it goes:

I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:

1. Made computer boot in safe mode with networking.

After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on. Any help is appreciated.

Hahaahahaha don't look at the other tab

A:WiFi not working after replacing WiFi card [BCM94352HMB]

Why are you booting into safe mode? I would connect a network cable to the wired network port, if possible for you. In regular windows, not safe mode, right click on the 802.11ac network controller and uninstall. Right click on the top device manager entry for the computer itself and select scan for new hardware.

12 more replies
Answer Match 99.12%

Okay, so my desktop is connected to the network by wifi to the wireless N (plus B and G) router. It connects to the internet fine and dandy. My iPhone can connect to the router, but drops the wifi signal most of the time. It doesn't seem to want to hold the connection because of either distance or interference from the wall or whatever.

What I want is to connect the iPhone's wifi to the computer for a stronger connection. But I don't want to move the router because it's centrally located and my office is kinda further away from it.

Equipment:
1 computer
1 802.11n wireless USB adapter connected to computer
1 802.11g wireless PCI adapter connected to computer
1 802.11n router connected to internet
1 iPhone with 802.11b/g connectivity
Is it possible to do this? I know what people have done it with one wired connection and a wireless connection from the computer. But can it be done with TWO wireless adapters connected to the computer?

Thanks in advance for any replies....

PS...I know it'd be easier to just use the computer to browse the internet since I'd be in the office anyway...but I work as a 3D modeler and alot of times I'm testing renders for scenes and such and can't stop the render without losing the progress. If I browse while it's rendering, it's possible I can crash the computer because of the heavy resources the 3D engine is already using.
 

A:Possible to connect iPhone's wifi to computer that is connected by wifi to the net?

Doesn't hurt (except maybe your time) to try. Get an ad-hoc wireless network working between computer and iPhone (using dynamic addressing). Then in Network Connections bridge the two wireless connections.

If it doesn't work, show the following for the computer before you bridge and when you have the bridge.

Start, Run, CMD, OK to open a command prompt:
(For Vista type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

1 more replies
Answer Match 99.12%

Hi Could you please tell me if this is possible:
My computer is connected to a wireless network. Can I hook up my D-link (DIR-412) to my computer and use the internet from the computer to output another wireless area?

Thanks sounds complicated.
 

A:Connected to WIFI and want to extend wifi with another wireless router

Where you live is your setup like this?

#1
Internet
Modem
WiFi Router

or

#2
Internet
Modem with built-in WiFi Router

If you want extend the WiFi you would get WiFi Access Point. Or you can take a WiFi Router and disable NAT, SPI, DCHP, then you create a static IP address. 192.168.x.50
 

2 more replies
Answer Match 99.12%

Wifi doesn't connect when i move away from wifi router. I have a wifi router installed in my drawing room where i get good browsing speed on phones and laptops. But the problem starts when i take my laptop from drawing room to my bedroom which is not more than 5 mtrs from router. Wifi signal drops to zero on laptop whereas it remains decent on phones. Earlier my laptop used to connect in bedroom as well..This is happening lately. Is there any solution?

More replies
Answer Match 99.12%

My laptop is Sony VAIO sve 1711 q1eb my adaptor atheros ar 9485. the drivers are reinstalled normally , the wireless service is enabled , the adaptor is enabled but I can't see any available networks (my router is OK I checked it ) and when I go to mobility centre the turn on wireless button is grayed out and my laptop doesn't have any physical WiFi button or any shortcut
And I am sure I did not install any programmes or something

A:cant enable wifi. turn on wifi button grayed out

Was it working before? When did this problem start?

4 more replies
Answer Match 99.12%

HiHad this laptop for a few weeks now and never had trouble connecting to wifi at home. But today I am unable to connect to wifi and I did a troubleshoot and it says that the problem is - 'WiFi doesn't have a valid IP configuration'I know the problem is my laptop and not the wifi as it is working fine on my iPad.Can someone help please?Thanks,Dee

A:Can't connect to wifi - 'wifi doesn't have a valid IP config...

Hi there @Dee85 Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you are having troubles with connecting to your home network; I am happy to help. Have you tried connecting to a different network with this notebook?Does the wifi (available connections) show up on your notebook at all?Have you tried resetting your wireless router? The error you are getting sounds like the router is not passing on a local IP address to your notebook. The problem could be on either side of that. Try working through these.Troubleshooting wireless network and Internet (Windows 8)Also, you can look at the power management for your wireless adapter:Disable the Power Off option for the adapter:1. Open Device Manager. (Win Key+R > type devmgmt.msc > OK)2. Expand the Network adapters.3. Right click on the Ethernet/Wireless Adapter and click Properties.4. Click the Power Management tab.5. Remove the check mark beside Allow the computer to turn off this device to save power.6. Click OK.7. Test. Forget the network: (Windows 8)1. Press Windows Key + C2. Click Settings.3. Click Change PC settings.4. Click Network on the left.5. Click Manage known networks.6. Click the network name.7. Click Forget.Reset the TCP/IP settings on your PC:1. Go to your start screen/menu and type CMD.2. Right click on the command prompt icon and chose Run as administrator.3. In the wi... Read more

7 more replies
Answer Match 99.12%

I have a HP Notebook 15. I restarted my laptop this morning and when it came back on, all options for connecting to the internet via WiFi were gone. I am able to connect to the internet via ethernet cable, and everything works this way.There are no options whatsoever to connect to WiFi or reset the connection or anything, however the WiFi itself is working because other devices in the house are connected to it. I followed a HP technical support online page, which provided step-by-step instructions of various ways to reconnect to WiFi but nothing worked. I tried restarting the computer, updating the driver software, making sure it wasn't in airplane mode, and troubleshooting. Nothing worked. What should I try next?

A:Unable to find Wifi adapter - Cannot connect to WiFi

Hi @jgkelly2, Welcome to HP Forums! I understand that wireless connection stopped working on your laptop. I want to help. Please run the Component test - Wireless Module to verify if the wireless network adapter is functioning well.HP Notebook PCs - Testing for Hardware Failures (Windows 10, 8) If the test failed, the wireless adapter needs to be replaced. Let me know if you need further assistance. If this helps you to reach a solution, please click the "Accept as Solution" button down below in this message. If you wish to say "thanks" for my effort to help, click the "thumbs up" to give me a Kudos.  Regards, 

1 more replies
Answer Match 99.12%

I have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password.
Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.

I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".

A:How/where do I enter WiFi password to join company WiFi?

Thanks for the PM with the solution. For anyone that is curious, I had to go to "Manage my Wireless Adapters" and then click on the company WiFi and click on "Forget". Then when I went back to connect to company WiFi, I got the popup to enter my Username and Password.

2 more replies
Answer Match 99.12%

1) Wireless connection issue. I believe wired works -- haven't tried lately -- but the major problems are wireless.

2) ISP: XfinityWifi hotspots and/or in-house router sharing said hotpot.

3) Conn type: Cable

4) Router: D-Link DIR-651

5) AV/etc: McAfee (out of date), MSE (not genuine anymore, thus disabled)

6) ipconfig /all output included below.

7) Xirrus wi-fi inspector: Downloaded on my desktop computer, USBdrived over to laptop, installed, run, screenshot attached. skmk is my in-house network; xfinitywifi is a bit too weak, but that's not the issue with this laptop.

Basic issue may well be an OS file corruption issue, as Dell support threw up their hands and suggested a clean Win7 install. Install repair hasn't helped.

Laptop is a Dell Latitude D630 or thereabouts, 4GB RAM, Win7 Pro 64, SP1. Onboard NIC is Intel Centrino Ultimate-N 6300 AGN, 9/30/2012 driver v 15.3.1.2 from Intel.

Adapter is enabled, but fails to find any networks at all. Complete removal/redetection/reinstall of device makes no difference, nor do latest NIC drivers. Under Manage Wireless Networks, the "Add" and "Adapter properties" buttons do nothing, and under Network and Sharing Center, "Set up a new..." and "Connect to a network" are similarly unresponsive.

I also have a Belkin 54G USB wifi adapter, which works perfectly in other computers, but it too finds no networks in the laptop. Previously, after the onboard NIC went unrespo... Read more

A:Dell laptop, onboard Wifi & USB Wifi nonfunctional

If wireless are enabled then perhaps check services.msc for WLAN AutoConfig (automatic - started). Your repair install should have taken care of this though so not very hopeful.

Edit: also try uninstalling McAfee

1 more replies
Answer Match 99.12%

Hi there,

My Canon MG 6120 printer used to work with all the computers in the house wirelessly. On upgrading the wifi modem, it is no longer recognised.

How do I get it to be recognised again?

Many thanks, Tony (using Win 10 64 bit on Gateway NV79 c0mputer)
 

A:Changed Wifi modem and cannot start wifi Printer

Canon PIXMA MG6120 Wireless Photo All-In-One Printer

Select Wireless Help, then select Re-establishing Printer Connection After A Network Change?.

The manual will download and appear in .PDF format so you can read it.

The information and diagrams you need will be there.

Note: You need to have Adobe Reader or some other PDF reader installed first, in order for the manual to load and be read.

--------------------------------------------------------------
 

3 more replies
Answer Match 99.12%

Ok here's my problem. I have a berklin wifi reciver on top of my house in a cantenna focusing at a satellite dish. It's pointed at my cousens house 3/4 th's a mile away. I have permission to use their internet and it's encrypted.
But since the wifi reciver card hooks up to my computer usb. what I want to know is. How can I hook up my netgear 54mbps router up to my computer so I can brodcast a wifi signal in my house.
The netgear router connects earthnet (dang spelling)
I have a earthnet card in the back of my pc should I plug it in there and will it brodcast into my router?
just wondering if this can be done. I am not relly experinced with networking.thx
I know thare's another post similer but is there any adapters or anything??
 

A:Netgear wifi networking useing another wifi card

12 more replies
Answer Match 99.12%

Hi there,

I have a new problem that has just cropped up today. I am no longer able to connect to public wifi or my phone's wireless hotspot. My laptop either will not connect or connect with limited access. It has connected without issue in the past and as soon as I returned home it connected to my wifi here.

What I did notice is I am connected to an unidentified network with no internet access in addition to my home wireless network:
Specs:
Acer Aspire S7 392
Windows 8.1 64 bit
Intel Dual Band Wireless 7260 (driver updated)
Disabled my firewall and antivirus

I just connected to my phone's hotspot again and here is what I am coming up with:
Attachment 57082

And when I run ipconfig/renew
Attachment 57083

Any ideas what could be causing this?

A:Can only connect to home wifi - no public/hotspot wifi

What Internet Security software are you using? Are you using any third party software to manage network connections?

3 more replies
Answer Match 99.12%

Hi, I have purchased hp-15-ba025au yesterday. After installing Windows 10 64 bit, I found that wifi is missing.  I am not seeing Wifi under device manager. Though I can see bluetooth. I am seeing one "Network Controller" under "Other devices". Not sure if it would help. Cheers,Dharmender 











Solved!
View Solution.

A:hp-15-ba025au wifi adapter and wifi connection missing

Hi: The parts list for your notebook indicates it comes with a Realtek RTL8723BE-VB 802.11b/g/n 1x1 Wi-Fi + Bluetooth 4.0 combination WLAN adapter. http://partsurfer.hp.com/Search.aspx?SearchText=X5Q25PA Below are the links to the wireless and bluetooth drivers you need for that model wlan card... This package contains the driver installation package for the Realtek RTL8723BE/RTL8188EE wireless LAN Controller in the supported notebook models running a supported operating system. File name: sp75613.exe This package contains the driver installation package for the Realtek Bluetooth in the supported notebook models running a supported operating system. File name: sp75614.exe

5 more replies
Answer Match 99.12%

I have two Lenovo N586 laptops. Both of them will reconnect to our home wifi on their own. I have disconnected. It reconnects. I have disconnected and changed the tick to connect automatically. It reconnects. Did those things plus turned off wifi antenna. The wifi turned itself back own and reconnected. I did the latter plus turned on airplane mode. The machines turn on the wifi antenna and reconnect anyway. When looking at the airplane mode tick it is still on but the machine is online.
 
I restarted the router and changed the login code. That allowed me to "forget" the network. However, when it was still looking to get online. If I entered the new credentials the same trouble starts.
 
These machines share the same wlan with data sharing. They also use the same login for Google Chrome so that we both have access to the same bookmarks, etc. 
 
Any ideas? Thanks in advance for the help. I used Bleeping Computer about 3 1/2 years ago to fix a problem. Now I'm back.

More replies
Answer Match 99.12%

I have issues connecting my Laptop to the Wifi router in my house, however, there are no issues connecting to other routers? You would therefore assume that the issue lies with the router at my house. However, every other device and laptop connects to the router at my house with no issues at all. So it seems to be specific to the combination of my laptop and the router at my house. I have been having these issues ever since I downloaded Windows 10. I fixed it initially by downloading an old driver for the Wifi on my laptop. This fix lasted for about 3 months but since the latest windows update, the issue has come back. The issue is intermittent wifi where it shows I am connected to the Wifi but then the internet doesn't work. It says "DNS probe cannot be found" when running troubleshooter and then it resets the wifi on my laptop. This can temporalily fix it, sometimes for 2 seconds. Sometimes for 2 hours. But then the issue comes back. Does anyone have any clue what the issue might be or how I might fix it? Sometimes, when I run the troubleshooter, it says that I have missing protocols. But then this doesn't happen every time. I have tried a variety of fixes that I have read up on in forums but none seem to work permantly. One thing I haven't tried is a clean install of windows 10 which is something I am very reluctant to do and also, have my doubts as to whether it would actually resolve the issue.
Many thanks,
Joe

A:Wifi issue specific to my laptop and home wifi

It all depends on location, location, location. Some Gateways are just garbage. If you are not getting a strong enough signal, get an Access Point. Also you need to make sure that you are not on a congested channel, which is usually Channels 6 & 11 for 2.4 Ghz units.

0 more replies
Answer Match 99.12%

This is the exact opposite of most WiFi issues. I have two guest networks set up on my wireless router (Asus RT-68U), one for each of my daughters. I change the password daily in order to make them earn the password with chores after school. My older daughter's T450 refuses to stop connecting to the WiFi, even persisting through reboots. MAC address filtering fails, as does turning off internet access to her MAC/IP combination. After changing the password or enabling one of the more strict rules, eventually, randomly, her laptop will finally decide to stop accessing her WiFi connection. I am fairly certain it is something with the Lenovo as I have two other laptops, one Asus and one HP that both respond as I would expect to a WiFi password change. Any ideas as to why this happens with the Lenovo?

More replies
Answer Match 98.7%

Alright so I have a laptop however I am unable to use its current wifi card for my wifi reciever booster I am making. So I needed a usb connector. I got the RNX-EasyN1. When I first got it I installed the driver off the disk. However I was still unable to get the device to detect any networks or for that matter enable itself in the network connections screen. So I went to their site and got the latest driver. Still did not work. I spent a few hours searching google, reinstalling restarting, and in general doing anything that seemed like the normal procedure when I cant get something to work. Yet here I sit with a wireless adaptor that every one else on google says works perfectly fine, and it wont work for me. Help please.

A:RNX-EasyN1 Wifi Adaptor wont work.

you can try to manually put the network info in.

or it sounds like you got a defective card you may want to return it and get a new one

1 more replies
Answer Match 98.7%

I've just installed a wireless PCI adaptor (Tenda W322P 11N) in my desktop PC but I can't 'enable' it - every time I double click it starts to enable then stops and leaves it disabled with no warning or error messages.

The system is definitely seeing it as it's listed in Device Manager, and if I bring up Network Connections (using ncpa.cpl) it's listed and shown as disabled. Why would windows stop it from being enabled??

I've tried downloading new drivers from the manufacturers site in case the drivers on the disk were old - no difference. I uninstalled it and removed the drivers and then re-booted so windows would use it's own drivers - no difference.

It seems the system has a problem with it, but surely ONE of the drivers would work if it was a driver problem?

A:Windows wont let me enable wifi adaptor

the software driver on their site is up to version 4.
If you are running on the driver off the disk it may be problematic.
W322P 300Mbps Wireless N PCI Adapter

9 more replies
Answer Match 98.7%

Hey peoples, wondering if you can give me a hand with this?

The audio on my Surface 3 is making an annoying af crackling sound but only when my WiFi adaptor is enabled. When it's disabled audio is chill but I can't stream without WiFi (obvi)

Anyone know what to do?

More replies
Answer Match 98.7%

I have a b590 running under windows 7 ultimate that defies every attempt to enable the Broadcom 802 11n network adaptor.  Device manager shows it as fully functioning.  Any attempt to connect & enable it through network and sharing fails, and I cannot alter the power management settings within the properties screen of the device. Can anybody help with this?

More replies
Answer Match 98.7%

Hi, I have recently been having problems trying to get a 5GHz hotspot up and running with windows 10 with the latest Anniversary Update. I need it because I live in student accommodation and have no control over my Wifi which is slow and unreliable, however the internet from the wall is pretty good and my pc is on pretty much 24/7 anyway. It really needs to be on the 5GHz band, as there are too many other things on 2.4GHz that drastically effect performance.

I have bought two Wifi Adaptors, The first one was a Mediatek RT2870 (AC600), which worked perfectly fine using the Mediatek Driver until the anniversary update, now it won't work at all, not even for wifi, device manager just says the device is not working properly, I have tried many, many drivers and am pretty confident that it just isn't compatible with the latest build of Windows 10, at least without a driver update (which is unlikely).

Next I bought a TP-Link Archer 4UH (AC1200), Not expecting any issues from a big and reputable company, and was going to use the Soft-AP feature, only to find that doesn't work at all in windows 10 (or at least the current build), the adaptor works just fine for Wifi, but that's not my intended use for it.

I then found out that Windows 10 Anniversary comes with the functionality to create a 5GHz Wifi Hotspot built in, but non of my (reasonably popular) adaptors work with it, or through their own software, so my question is what adaptors actually will work reliably with this fe... Read more

More replies
Answer Match 98.7%

Hi I'm having wifi problems with my Yoga2Pro's wifi, but I can't figure-out whether it is hardware or software. There is evidence to suggest that recent versions of Windows 10 have been causing wifi problems. If the problem _is_ with Windows and they are going to fix it, then I can stop worrying about trying to fix the hardware (I am travelling abroad and it is near-impossible to find expertise/parts/tools and out of warranty).Gory Details:System: Levono Yoga2 Pro laptop. Intel Core i7-4500U. 8GB RAM. Windows 10 64 bit.I have been using Windows 10 since it came out without any problems. I have been keeping it updated. Precursor to this problem: On 4th November 2016, apropos of nothing, my wifi stopped seeing the wifi network it was connected to; or any other wifi networks. (My phone could see plenty). This was evident in the Taskbar, Action centre, Settings dialogs of the PC. The Windows version was upto date at the time, but downloading the next week's Microsoft Patch Tuesday updates (9th Nov) fixed the problem. System working AOK. Yay.(MS update KB3200970 "Addressed issue with the system tray showing no Wi-Fi connection even when Wi-Fi is present") System fixed - I made a system-restore point. The "fix" held for 24 hours, then a new, more severe problem started occurring (='the current problem').Current problem: After 3 to 5 hours of normal, troublefree operation, the PC stops seeing the wifi entirely. Any menu options associated with wifi networkin... Read more

More replies
Answer Match 98.7%

 I purchased a HP Stream 11 notebook/laptop last week and for the last week have been very happy with it (its pink) but earlier tonight a problem has occurred and now I cant use it. I was half way through watching a programme paused it for ten minutes went back to watch it and it was no longer connected to the internet, the internet access symbol has an X in a red circle above it. I cant connect to or search for any wireless networks. I have ran diagnostics and it came back saying no problems found but it is a problem and a major one, It seems that the wifi driver has disappered,When I go to 'turn wireless devices on and off' it only has the options for either flight mode and Wireless devices bluetooth!! I have searched to try and find what the problem is and apparently there should be a wifi option here to. Please help me I dont know what to do.

A:HP Stream 11 Wifi adaptor stopped working?

* My computer installed some updates a few hours earlier, not sure if this has caused the problem? but as I said it was working fine since then. The operating system (that came with it) is Windows bing 8.1I did not update to windows 10 yet.

6 more replies
Answer Match 98.7%

hTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz, x64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 3002 Mb
Graphics Card: NVIDIA GeForce 310M, 512 Mb

Motherboard: TOSHIBA, NWQAA
Antivirus: Microsoft Security Essentials, Updated and Enabled

I am using a Toshiba Satellite A665- S6070. I am able to connect to the internet with WiFi I just cant use my laptop for a hot spot. I was able to before then all of a sudden I just couldn't. When I go to the device manager there is a yellow triangle at the Microsoft virtual WiFi miniport adapter when I click on it the reason is a code 10 failed to start. I ran Mr. Fix it and I found out there is a driver problem. I have uninstalled and reinstalled and it is the same thing. I have gone to the Toshiba website and the Microsoft website and can't find a driver for it. I think it is part of Windows 7 but the computer came preloaded so I don't have a disk. Also in the device mgr. under hidden devices non plug and play there is a yellow triangle at hlnfd the status is This device is not present, is not working properly, or does not have all its drivers installed. (Code 24) the status is stopped and the start up type is system

Please please help me.........

Here is the results from the MGA

Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validat... Read more

A:Microsoft virtual wifi miniport adaptor

9 more replies
Answer Match 98.7%

I recently updated my Inspiron 14" 5459 to the Windows 10 anniversary update, i noticed that when my wifi access point changes or wifi signal drops or turning off wifi, my laptop semi-freezes, you could still scroll with the mouse or track pad and select open tabs but that's all, clicking other icons and even the windows start menu does not work, if you wait for more than 5 minutes, everything goes back to normal. Waiting around for about 5 minutes is annoying so what I do is press ctrl alt delete and from there restart the laptop. my wifi adapter is updated to the most recent version and also both graphics card (intel hd 520 and amd radeon m335) is also updated to the latest version.  Any suggestion on how to resolve this issue?

A:after Windows 10 anniversary update, Inspiron 5459 freezes if wifi is turned off or wifi access point is changed, is there a solution to this problem?

Please confirm the wireless card from the device manger or the network control panel. Also please update the BIOS firmware to the latest version. The BIOS update should ideally be version v1.2.2. Also please try system out with  a LAN cable as well to confirm if is indeed caused by the wireless. Though this may not run a complete diagnostics on the network you can run a hardware diagnostics on the computer using the following steps

Shutdown the computer
Hold the 'Fn' key and turn on the computer
Let go of the 'Fn' key after 2 seconds

This is will initiate the H/w diagnostics. Please let us know if it completes or if  you run into any errors. If  you do run into any errors. 

1 more replies
Answer Match 97.86%

My wife is wired. I am wifi, my wifes son uses a Wii and wifi with that. If she is on, and he is on, my flash videos wont play. I want to allocate more resources to my pc's wifi than he can get with his wii wifi. It seems his is overriding my wifi, even though I have full bars. I want to switch this.. It's my house, my phone line, my internet, my priority. I want to be able to say to him.. Er.. sorry.. your stuff just doesn't have enough bandwidth right now. I demand use of the minimum amount of bandwidth I need for my uses. Any way to do this?

More replies
Answer Match 97.86%

my Broadcom BCM43142 802.11 bgn Wifi adaptor says it is missing (Code 39) . I can't get any internet and have no idea how this happened. I need help! Thanks in advance!

More replies