Tech Problem Aggregator

RRAS & IP Numbers

Q: RRAS & IP Numbers

I am using an NT box as a router for a small network, I have NT 4, SP5, IE5, IIS 4, & RRAS installed on the server.
I am running NT 4 on the other box.
Everything works like a top except I can not ping the router IP number from the other boxes on the network.
I can ping the IP number assigned to the NIC on the server, and can ping out to the internet, browsers, chat rooms, & e-mail all work fine. But because I can not ping back to the router IP number I can not enter my pow chat rooms which run on the server. I have had this system working fine once before, but due to a reformat on the server I lost this part and am just overlooking something.

Any help would be greatly appreciated.

Stingray

A: RRAS & IP Numbers

have you checked the subnet mask?

2 more replies
Answer Match 48.3%

okay...

I have been given the task of migrating our email system from our old internal system to an external POP3 based email system. The problem that I have is my DNS entries in the email clients are both the same (ie: pop3 and smtp both point to the same server with the same DNS entry, e-mail.xyz.com) I would like to use RRAS for PAT. I already have my RRAS server up and running and NAT is installed, but past this point, I am at a loss. I am thinking that looking at the online help in windows 2000 Server I am going to have to do this through the command prompt with the IP route commands, I have printed out a list of those commands, but am not really sure which ones to use.

Basically what I want to do is to point my DNS entry to the RRAS box and then have the RRAS box go and take all traffic comming in on that adapter with the POP3 port to go to one IP address still on the POP3 port, and then take all of the traffic destined for SMTP's port on the same adapter to retransmit it out to another IP address still maintaining the same SMTP port. both the POP3 and SMTP IP addy's are external, public IP addy's. My RRAS server exists behind a firewall, but has a second NIC in it that is NAtted to the outside world by my firewall, and I am currently running it as a VPN box and it works great for that.

PS (although this shouldn't matter) my VPN box exists on a different subnet then my DNS boxes, but all of the routing between them is configured properly
 

A:RRAS configuration help

POP3 and SMTP are different protocols communicating on different ports. I suppose RRAS could do the authentication but this seems like a roundabout way to do things. If you have a firewall just open the ports for pop and smtp and point them to the correct IP address.
 

1 more replies
Answer Match 48.3%

HI All
I know PPPOE broadband connection is little bit old tech but I need help on this.

I've a network with following spec

1 W2k3 server with 2 NIC

NIC 1 : Static IP 192.168.0.19/255.255.0.0 (No Gateway)
NIC 2: DHCP ( IP given by ISP )

NIC 1 is connected to switch also all the XP machies.
WIN2k3 also has DHCP enable on NIC 1 so that xp machines can get IP
DHCP Scope is : 192.168.0.3 - 0.15 with gateway 192.168.0.19

Now in RRAS in WIN2k3 i've to setup deman-dial option for PPPOE connection to share the internet but it seems not working..

is there any good guide i can follow or anyone can help me out on this?

Thanks
 

More replies
Answer Match 48.3%

I'm trying to setup a VPN server on W2K Server (SP3). That same machine is running as my web server, and is also running terminal services so I don't have to go upstairs to work on it. When I start RRAS everything is shut down (as expected). I can no longer see the web site and my TS session is disconnected. I move to the console and open what I would consider the appropriate incoming filters in RRAS (like port 80 for web services) but for the life of me I can't get to the web site. At this point not even the VPN is functioning, but I'll worry about that once I figure out this RRAS/IIS contention. Please help.....

Kevin

An update. I just opened all filters, incoming and outgoing and can access the web site. I guess it does have something to do with the filters. Maybe I can figure this out afterall. Still, advice would be appreciated.
 

More replies
Answer Match 48.3%

I am looking to setup a secure vpn connection from my laptops to my office and use a RDP connection to a server. I have a ASA 5510. Which is better for a vpn ASA client or MS RRAS? Also,I want to do the following if possible: redirect the USB GPS to the RDP connection (it's a Delorme yellow brick usb gps). If this is not possible (I have not found a way to do it as of yet) then I will run the GPS on the laptop with the application that uses it. I was hoping though to run all of my applications through the RDP session to have minimal software on the laptop. Please let me know your opinions and ideas. Thank you in advance.
 

A:RRAS or Cisco VPN with RDP

Are you doing this over a WAN connection?

If you can get RRAS or any other VPN client working on a Cisco firewall/router, post up what you did because I have tried with the built in IPSEC client in XP and the Netgear ProSafe VPN client. Neither of which work.
 

2 more replies
Answer Match 47.46%

I have two subnets that I'd like to link. I have a 10.0.0.0/24 subnet and a 192.168.1.0/24 subnet.

In each subnet, I have a 2003 server running RRAS. The 10.0.0.0/24's server is office-srv01 (10.0.0.10) and the 192.168.1.0/24's server is home-srv01 (192.168.1.10). Office-srv01 is dialing a PPTP VPN connection to my router which runs DD-WRT. It is getting assigned the IP address 192.168.1.50. The VPN is configured using a demand-dial interface set with a persistant connection.

What works right now: The VPN Connection: I can ping and remote desktop office-srv01 at 192.168.1.50.

What doesn't work: I can't access anything on the office subnet nor can anything on the office subnet (besides office-srv01) access anything on the home subnet. In otherwords, no routing is taking place.

I setup a static route on my PC as follows: route add 10.0.0.0 MASK 255.255.255.0 192.168.1.50

The tracert is as follows:

C:\Documents and Settings\austin.HOME>tracert 10.0.0.10

Tracing route to 10.0.0.10 over a maximum of 30 hops

1 166 ms 1 ms 1 ms 192.168.1.1
2 192.168.1.1 reports: Destination host unreachable.

Trace complete.

What I can't figure out is why it's effectively ignoring my static route and going to the default gateway.

IP Routing on office-srv01 has been enabled, so it should route packets between the subnets (however, I don't appear to have a way to test that).

Right now, I don't have home-srv01 doing much of anything. It's... Read more

A:Link two subnets via RRAS and VPN

6 more replies
Answer Match 47.46%

Here's the issue I am having.
My VPN is currently on a server 2003. I have installed it on my server 2008. I go into my sonicwall and changed the IP address from 192.168.0.11 (old VPN server) to the new IP 192.168.0.13 (new VPN server) and I am unable to connect to VPN.
However if I change the IP address of the new server to 192.168.0.11 I can connect via VPN just fine.
I'm not sure if it matters but my old VPN server is also a backup domain controller and DNS, the new server is just a file share server and has IIS enabled for our antivirus.
I've looked at every setting I can think of and I even called Sonicwall and they state everything looks good in my settings. Any help would be greatly appreciated in this!
 

A:RRAS on Server 2008

I'm going to move this to networking, as I believe that you will get more assistance for this particular problem in that forum. Yes, it's a server, but this is primarily a networking issue.

and welcome to TSG.

thanks,

v
 

1 more replies
Answer Match 47.46%

Hey everybody.

I don't know if the title is a good one for this problem, but here goes.

I have a column that has numbers in this format: 54321-1234

Now, I want to take off the last 4 numbers, and the dash, from all the numbers in the column, using a formula. So that the output would be: 54321.

I want it so the first 5 numbers stay the same, but the dash and last 4 are gone. Is this possible?

Thanks.
 

A:Solved: Excel 2003: Replacing Large Numbers with Smaller Numbers

13 more replies
Answer Match 47.46%

This was asked before by KlausdB:

"I have 4 x HDDs on SATA AHCI (Intel Controller) in Native Mode and 1 x ESATA on Win 7 Pro X64.
I noted that looking in Admin. Tools\Computer Management\Storage (as an example) the 1st HDD (Port 0 in the AHCI BIOS) is showing as "Disk 2" instead of my expectation of


"Disk 1".
Selecting the Drive's Properties correctly shows the "Location 0 (Channel 0, Target 0, Lun 0)".
I also note that the Disk Number allocation in Windows will change randomly after some reboots/startups - going anywhere from "Disk 1" to "Disk 4".  I can force/replicate this


behaviour by removing the ESATA drive.
Is this expected behaviour?
It doesn't appear to create any operating issues at this stage, however, is there a way I can force the Drive to always map to (eg) Device 0 --> Disk 1, Device 1 --> Disk 2,


etc?
Thanks."


 This was answered by Nicholas Li:

"As far as I know, how the disk is plugged physically and the order it is displayed are not related. For a simple example, if a drive is plugged to SATA interface 4 and it is the only disk, it will be displayed as Disk 0. If there is no related issue about
the disk order, I think we can safely ignore this."


 Because the topic was closed I want to ask a new question here:
 What happens if one of the 4 HDD drives or 5 has an OS installed on it? I ask because windows always write some bo... Read more

More replies
Answer Match 47.04%

Trying to implement VPN using Windows Server 2003. I'm trying to connect it to my domain controller. In RRAS I've configured two NIC's. One is for the Private Network (192.168.2.1) and the other is connected to the Internet using a Wireless Network 192.168.1.105 (and I've got Internet access).

I log on to another networks wireless Internet connection and the IP address given to me is 192.168.0.31.

Then on Windows XP I, Create a new connection, Connect to the network at my workplace, Create Virtual Private Network Connection, Select Do Not dial the initial connection, Address of VPN server: 192.168.1.105 (is this how I'm supposed to do it, or am I way off?)

My windows firewall is turned off on both ends. And I've created a user account called "cohovineyard\userone" and on the Dial-in tab "Allowed Access."

On Remote Access Policies I created a policy called "VPN policy" and added a Windows-Group called "supportteam" (which user "userone" is a part of)

Under IP Routing
NAT/Basic Firewall
Local Area Connection 2 (192.168.1.105) (is set to "Public interface connected to the Internet," and
"Enable NAT on this interface" is check marked)
Local Area Connection, (192.168.2.1) (is set to Private)

Under tab "Services and Ports"
"VPN Gateway (PPTP)" is check marked and the private address I gave it was
(192.168.2.1)

When I try to connect I get Error 800: Una... Read more

A:VPN Windows Server 2003 using RRAS

How do people implement VPN's in the real world? Is it usually using ISA server? What do people mainly use to set this up?
 

3 more replies
Answer Match 47.04%

I know i'm being dumb here but I can't get my very simple setup to work, and it's driving me crazy! Any help would be much appreciated.

I have a small static IP'd LAN network (192.168.10.0) connected to a W2K3 box acting as all-purpose server. The server NIC on this LAN is IP 192.168.10.10. The second, external facing NIC on the server is IP 192.168.3.2, on LAN 192.168.3.0. The only other box on this LAN is a router/firewall, IP 192.168.3.1.

The router/firewall is a linux box set up to forward (NAT) all traffic coming in from LAN 192.168.3.0 to its external-facing NIC, the IP address of which is obtained by DHCP from another upstream router.

I can access the internet fine from the server, but the LAN clients on 192.168.10.0 can't access it. The problem appears to be that the server is not forwarding traffic from one NIC to the other, ie from 192.168.10.0 to 192.168.3.0, but I don't know why. I have RRAS installed, with LAN routing enabled. I have examined the routing tables and tried just about every combination I can think of but I can't do it.

I am not knowledgeable about routing but I feel that this should be a simple thing to accomplish. I have read what I can find online on RRAS but nothing seems to explain the simple (static?) routing that I need to set up. Can anyone help?

Thanks in advance.

spoov
 

More replies
Answer Match 47.04%

I demand Microsoft to follow the issue causing persistent error 720 in PPPoE connections irreparable without rebooting the machine, what is critical not to be inevitable in certain circumstances like in our company, where Microsoft Windows product
is used in a way it needs stable uptime and programs calculations running 24/7.

The sympthoms:
- Windows 8.1 Pro
- PPPoE connection established once fresh boot
- 2 out of 3 times the PPPoE connection lost or disconnected manually, the bug appears.
- Then trying to connect to the network causes error 720 and has no success ever until reboot

Tried repair attempts:
- Network Diaglostics / Network card reset / reconnecting the cable physically / turning on-off the network card and WAN miniports except for IP miniport why see below
- Reinstalling/updating the network card drivers, tried several different versions old from 2013 to newest
- Reset/reinstall netsh states, protocols, interfaces, winsock and firewall
- Uninstalling/reinstalling WAN miniports through netcfg and even attempt through devcon
- Wokring in clean startup
- SFC /scannow
- Dism /Online /Cleanup-Image /RestoreHealth
- Putting the same connection on another Windows 8.1 installation

The bug appears when the PPPoE connection is disconnected by any means. I am sure about the exact time of this happening. There is no messages or logged events on that moment, but I know it exists: since if I cancel the connection not established
yet I could try t... Read more

More replies
Answer Match 47.04%

Hey All,
Since PPTP has been sunset from OS X Sierra (many of our end users have Macs) they're unable to VPN into the office.

Yes, I know PPTP is an obsolete connection and has its vulnerabilities, so I'd like to move away from it to an SSL version. However, SSTP, to my understanding is not supported in OS X. So what is the best solution for Mac users connecting into a Windows based VPN?
Thanks!
 

More replies
Answer Match 47.04%

We just performed an upgrade from NT Server to 2000. RAS worked fine before upgrade, now it does not work. Can still see the other NT RAS but cannot see the 2000. Received following error in Server Log "The Routing and Remote Access Services terminated with service-specific error 2147500037" I know that is not a valid error message since the RRAS is running and I have no problem starting and stopping the service. What I don't see in the Remote Access Admin is the server, instead the following message is displayed "Remote Access Service is not started on the selected server" Any clues?
 

More replies
Answer Match 47.04%

I have three SATA hard drives :
Main system/boot drive , WD Caviar Black 1 TB, connected to the SATA 0 port
A backup drive, identical WD Caviar Black 1 TB, connected to the SATA 1 port
Another dirve, Hitachi 1 TB, connected to the SATA 2 port
When I installed Win 7, only the main drive was connected... and it remains the only drive with active/system/boot partitions.

QUESTION 1.
All three drives reporr correctly in the BIOS, and in the right order, but why is it that only one of the drive (the one on SATA port 1) has a "SATA:" prefix and the others have a "HDD:" prefix ?

QUESTION 2,
Why is it that the assignment of Disk #0, 1, 2 ( as seen in Disk Maanger or DiskPart) does not seem to have nay rhyme or reason?

I would have expected:

- the hardrive connected to SATA port O, to be assigned as Disk 0
- the hardrive connected to SATA port 1, to be assigned as Disk 1
- the hardrive connected to SATA port 2, to be assigned as Disk 2

but instead, I have:

- the hardrive connected to SATA port 2, is assigned as Disk 0
- the hardrive connected to SATA port 0, is assigned as Disk 1
- the hardrive connected to SATA port 1, is assigned as Disk 2

Just curious why that is.

I am assuming there is no way to chagne this. Its not something I would dream of reinstalling Windows 7 to correct ( even if it did correct it).

A:SATA port numbers vs assignemnt of Disk numbers/

Best advice, leave it alone. It may bother your (and others) sense of order but it won't affect how anything works, and no re-installing Windows won't change it.

9 more replies
Answer Match 46.62%

I was wondering if anyone knew of a way to deny RRAS servers from pulling DHCP addresses from a DHCP server?

My scenario is that I have no control over the RRAS servers, but they are also not using RRAS for remote access. The trouble is that the RRAS servers are acquiring addresses to be distributed to remote access users.

Is it possible to deny the RRAS servers from acquiring addresses from the DHCP server? If so, How?

Dave Hickey
 

More replies
Answer Match 46.2%

Hello and thanks in advance for any help.

I have a small office network with only a couple servers, and even fewer workstations. We have WiFi and cabled Ethernet, and are running a Verizon Fios internet connection. I have setup a RRAS (routing and remote access) server, and established the VPN.

I can connect to the VPN with no errors or problems via the internal network. When I attempt to connect to the VPN via an internet connection it fails with error 691.

I can see the traffic via the router logs. I can also see errors in the RRAS servers event viewer, so I know that the connection is being made, but for some reason authentication is failing.

All the settings are the same for both connections, and I am using the same user name and password for both connections as well.

How can the authentication fail connecting to the same VPN, using the same method, just having the data go two different directions? PLEASE HELP!

thanks again.

A:Windows RRAS PPTP VPN Connection issues error 691

Hello,

Have you looked at the following:
"Error 691" or "Error 734" When You Attempt to Establish a Dial-Up Connection in Windows XP

Also, can you verify that the networks are on different IP Ranges, as this is required for VPN Connectivity to work correctly.

Can you give us some more information on the RRAS Errors?
Dave

6 more replies
Answer Match 45.78%

I was checking my program and software list and at the top of the list I noticed two (2) sets of numbers that I have never seen before. I checked the internet to see if I could find out what they were. It kept taking me to sites for spyware, adware,etc. I could not find out what they were or why they are on my system. I do not want to remove them until I know what they are. I have not noticed any problems with my system, but I do not know what might be going on behind the sceen. The numbers are listed as follows:
{684CB795-C157-4E15-93D4-E26015FEF1EA}

{F850707C-B6A0-4B56-8709-F89CF8F9AC6D}

ANY HELP?

A:Found Numbers Unknown Numbers In System

The first one > http://www.acresso.com/products/is/i...d-overview.htm

The second one > http://eraser.heidi.ie/

Both are legit and not malware.

1 more replies
Answer Match 45.78%

I have Windows XP, with Wordpad v5.1 and Notepad v5.1 as well. In Notepad, if I toggle off Word Wrap, I can then toggle on the Status Bar, and it shows me the line and column number in the status bar. It does not look like Wordpad has the ability to show line and column numbers. Does anyone know if there is a way to show that in Wordpad? Thanks.

More replies
Answer Match 45.36%

I had the RRAS working fine for months, I tried to configure L2PT and after restarted the Routing and remote access access services, I am not able to ping, rdp or connect to the network, even I connect vpn PPTP successfully. I undo the the L2TP settings
and restarted the routing and remote access service, but still cannot longer access any network resources.

More replies
Answer Match 45.36%

I was wondering if anyone knew of any wesites or books thought would be a good reference for this. I looked on Microsoft's site, but was a little vague. Thank you.
 

A:{Advice Offered} - Routing and Remote Access Service(RRAS)

Check this site out...... How to Use Routing Information Protocol Over Routing and Remote Access Service Dial On Demand and Virtual Private Network Connections

{Message from Reuel: Just turning it into a nicer hyperlink [​IMG] }

[This message has been edited by Reuel Miller (edited 09-20-2000).]
 

1 more replies
Answer Match 44.94%

Hiya

This management pack module has been updated since the release of Microsoft® Operations Manager 2000 Service Pack 1 (SP1) and is now supported for use in international-language configurations.

System Requirements
Supported Operating Systems: Windows 2000

MOM Software: Microsoft Operations Manager 2000 with Service Pack 1
http://www.microsoft.com/downloads/...86-2eeb-44a5-8196-5d4eb24f6ea0&DisplayLang=en

Regards

eddie
 

More replies
Answer Match 41.58%

Hi,
I have some reference books I use and in all of them I have this problem:

The number written on the document pages doesn't match the number my pdf reader says, and for every document it has a different offset. That is, for example when I go to page 16, then on the page itself it's written that it's page 5 and not 16.

It's an annoying problem.
Is there any way to fix this by changing the pdf numbering or is there any workaround?

Thanks
 

A:pdf page numbers donÂ’t match document page numbers

16 more replies
Answer Match 40.74%

Hi, so far i have managed to make my program so that it prints out the odd numbers between two inputted numbers but i need it to print the sum of them?
This is what i have:

public static void main(String[] args) {
int int1, int2, sum = 0;
Scanner scan = new Scanner(System.in);
System.out.println("Please enter two integers: " );
int1 = scan.nextInt();
int2 = scan.nextInt();
for (sum = int1; sum <= int2; sum++){
if ( sum %2 != 0 ){
System.out.println("" + sum);
}
}
}
}
 

A:Java: Sum of all odd numbers between two numbers?

9 more replies
Answer Match 32.76%

If I sent an email to someone, is it possible for them to get my IP address from that email?
 

A:IP Numbers

13 more replies
Answer Match 32.76%

hi all
can anyone help please

on a excel sheet i need h1 to only allow certain numbers to be entered, if any other numbers are entered then an error message to show

i.e only the numbers 2, 4, 5, 8, 9, 10, 12, 14, 17, and 22 need to be entered in cell h1 for other calculations to be carried out. any other number can be entered but on doing so i would like a error message to show

many thanks
 

A:only certain numbers

Have a look in 'Data Validation'.
 

1 more replies
Answer Match 32.76%

I wonder why on programs downloads for 32bit OS are tagged as "x86" while 64bit OS program downloads tagged as "x64",what does the "X" stands for and why the value of 32bit is bigger.

A:OS Numbers..?

x86 - Wikipedia, the free encyclopedia

3 more replies
Answer Match 32.76%

it was working just fine a while ago now when i try to type a number this is what happened

41=1
52=2
.3=3
41=4
52=5

someone help me out please..

A:Numbers pad

What you describe can be a sign of the keyboard going bad. Are letters affected when you type those?

Do you have access to another keyboard you can use to see if it also happens with it?

3 more replies
Answer Match 32.76%

This is basically for my father, his numbers on the key pad to the right of the key board are not working. In the past I have checked several options and ended just hitting some keys (i.e. alt F4) until one of them seems to work. Now he is having problems again. Is there something else he can do?

Thanks
 

A:Key pad numbers

is it possible that you have pressed the number lock key, this is situated on the row above the number keys...mine is above the number 7 key.

press it and see if this solves the problem
 

1 more replies
Answer Match 32.76%

My Sandisk reader for my camera went bonkers. Now I want to buy another one cause the camera is still good. Anyway, It says it takes a 2.0 usb port, which I know I don't have if its more than 4 yrs old. Anyway, how can you tell what your usb port number is? I have just the regular usb ports that come with the computer, it says its backwards compatable and works with the 1.1 usb port number.????????????? Any help would be appreciated.
 

A:USB numbers?

6 more replies
Answer Match 32.76%

My system is an IBM P4 3.2GHz running Windows XP Pro SP3. When I power the system on, there are some Hex numbers that appear at the lower right of the monitor screen such as 003B, 0075, 0078, 0073 and probably several others that I can't see because they come and go rather quickly. Does anyone know what these numbers mean and is there a problem with my system because these numbers appear?? My system appears to boot & run correctly and there are no hardware or software problems that I'm aware of.

Thanks for any help here.

David

A:What do these numbers mean??

Do they appear and change when you move your mouse? When you press a key on the keyboard? It looks like it could be some type of debugging information but nothing harmful.

3 more replies
Answer Match 32.76%

I hear that soon we will all have a personnal ip number. IP version 4 or something similar? Is this a good thing?
 

A:IP Numbers

Where did you hear that?
There are too many people for individual IPv4 numbers. IPv6 could do. But I still doubt that.
It's a Bad Thing if something like this happens.
 

6 more replies
Answer Match 32.76%

Hi all, I am running Vista and using PC Doctor for protection. I get pop-ups regularly that say a "Bad Website" is blocked??? All I get are the site numbers such as:

68.36.166.127

How can I determine if this website is necessary or if I should block it? I get 5- 10 of thses a day. I am afraid that if I block all of these, I may disable some programs. Is ther some way I can tell what these numbers are referring to?
 

A:URL Numbers..what are they?

6 more replies
Answer Match 32.76%

I want to upgrade my laptop RAM from 4 GB to 6 GB. Before buying the 4 GB RAM I have to know the exact pin of the RAM, and I don't know the exact numbers of pin in the RAM. My laptop is Ideapad Y550 4186. So how can I know the numbers of pins in the RAM without having to open the case? Please help!

A:How to know numbers of pin in RAM?

It's 204 pin, but you need to know more than that.

That's a Lenovoe Ideapad Y550. I entered that make and model into the configurator at Crucial.com and it came back with the following compatible RAM choices for that laptop.

Computer memory upgrades for Lenovo IdeaPad Y550 (All Types) Laptop/Notebook from Crucial.com

3 of those choices are for 2 GB sticks.

You can shop for those same Crucial part numbers from your source or buy 204 pin RAM from another brand as long as it has the exact same specifications.

6 more replies
Answer Match 32.76%

What and where do i type in to get the numbers that i used to install my w98se software? I can't remember what to do to recover those numbers , or can someone provide me with a set that works? I've seen them on my setup, forgot how to recover -

thanks
 

A:win 98 se numbers

7 more replies
Answer Match 32.76%

Hi i am setting up a home network on a domain. and windows 2000 server is asking for numbers such as DNS numbers, WINS numbers. Where do i get these from or do I need to make some up.

Thanks
 

A:Numbers etc. where do i get these from

10 more replies
Answer Match 32.76%

Windows 98SE

while online how do you check your DNS numbers?
I typed winipcfg in the run box but I don't see them there, does anybody know the command to check DNS numbers while connected.

Thank you.
 

A:DNS numbers

6 more replies
Answer Match 32.76%

I have a program written in Delphi which display a result in a box(editbox).
The signs is to big for the box - the last digit disappears. All the other text and numbers are the right size. The program work well on a identical PC with the same OS - Win XP home SP2. It must be something with the windows settings. Grateful for any help.

More replies
Answer Match 32.76%

What is an (Internet) IP number, and how unique is it. Does each Internet user have an unique IP number?

For each message posted, why is it necessary for this site to log IP numbers, which are inaccessible even to the poster?

------------------
R. J. Emery
 

A:IP Numbers

13 more replies
Answer Match 32.76%

Whenever i go to type in a URL it comes up as numbers. it types in order of 0-9 and repeats no mater what i type so if i type in WWW. Google.com it reads out 34567890123456 or if i type out abcdefghijklmnopqrstuvwxyz it comes out 56789012345678901234567890 but if i paste abcdefghijklmnopqrstuvwxyz it reads abcdefghijklmnopqrstuvwxyz

i don't know what this is or why it does this, i have read other threads on the same thing and it says its a virus or a script error if it is either how can i fix it?

A:My URL box only types numbers

If you're using complete Comcast services, the problem exists due to a conflict with Guardian. Call Comcast. Toggling Numbers Lock is probably fruitless, but try anyway and also a different keyboard although I don't think that's where the problem lies.

2 more replies
Answer Match 32.76%

I have a 2.8Ghz P4 with HT, in my BIOS it says HT is enabled, but when I ran a 3DMark05 - Free Editon test it gave me a whole bunch of stuff, which in sort says: "HyperThreadingTechnology Available - Disabled " Disabled? How do I check to see if it's actually working or not? Also what is supposed to be the speeds for AGP and PCI, when I boot up my PC it says 66/33, and 200 for my ram, which is ddr400. Could it be higher? I'm reading about overclocking, but I want to know if these numbers are atleast right for what they should be. Thanks
 

A:HT, numbers and stuff

16 more replies
Answer Match 32.76%

I have 2 USB ports on my laptop which are com 5 & 6. I have a program that needs com 1, 2, 3, or 4. Can anybody tell me how to assign a different port number to my USB ports.

Thanx
 

A:Com port numbers

7 more replies
Answer Match 32.76%

Hey !

Just installed my Samsung 850 Pro 512GB so I really wanted to test it out. Installed Samsung Magician and Crystal Mark to bench the drive.

This is the first test run :


Not bad at all, pretty little numbers Then I went in Samsung magician and I optimized the drive.
- Over Provisioning
- Rapid mode

Now.... Look at these numbers, this can't be right at all. You think maybe it's doing the test on the Windows virtual memory ??

Thanks !

A:Weird SSD numbers

Yes, when you set up rapid mode, it tests the ram disk and not the SSD itself. Those are about the expected numbers.

0 more replies
Answer Match 32.76%

Does anyone know of a FREE program where phone numbers can be checked to see whom they belong to without having to pay a fee?
 

A:Phone Numbers

6 more replies
Answer Match 32.76%

I have norton firewall and antivirus, and am glad I do. Anyway, when i get hit, i can trace it back to the general area, such as the lastest from University of Michigan. If i have the computer IP number, can i track it further. can you type the ip number next to www. and send it. if so are there complications? I usually get hit every time I am on the internet. High risk, the whole thing. I know which programs are allowed so they are not essential to the system.
 

A:computer ip numbers

14 more replies
Answer Match 32.76%

Hi, I am trying to make a comparison against a set of data and rank them accordingly. The data can comprise up to 150 rows.

I compare data in column 1, get the ranking from there and if there is a tie for certain rows, I compare data on column 2 only for the rows that are tied. This is repeated until there is no more tied data or until all the columns have been exhausted.

I have attached the sample data and also the expected answer for easy reference. Thank you in advance to anyone who can help with this.
 

A:Ranking a set of numbers

You didn't said about the order of the ranking should it be upward or downward?
Also I'm not sure I understood the process, cause the way I understood it, the ranking should be a little bit different?
Do you just wanna the ranks or you wanna to sort the data too?
 

3 more replies
Answer Match 32.76%

hi

I have a form where two languages be entered at the same time, I have got the words and text entered in english and arabic , but when it comes to numbers and dates , it just stays as english . I tried through the control panel and change the neccassary but still the numbers stays english. If I completely in the control panel changed to arabic, all the english date and numbers are in arabic.

Is there a way that when pressing the ALT SHIFT the numerical also change to arabic ( text is fine in arabic ).
 

A:Arabic numbers

First, what program are you using?

it happens when you dont have an arabic font installed and selected as your text style. For example, if your default font is Times and you switch to arabic keyboard, it will let you type arabic but won't type the arabic numerals.

if you are typing in word, try to change over to an arabic font (not Adobe Arabic).

P.S. you will be able to type english numbers when you switch the keyboard to english and your font is an arabic font.
 

2 more replies
Answer Match 32.76%

I have a problem I hope someone can help me with. No matter where i go online, no matter what ISP i use I get little blocks of numbers besides everything on the page that is clickable. I assume because its on all ISP's & all web pages it is a problem in win XP. But i cant figure out what can you please help.?
 

A:Blocks of numbers

6 more replies
Answer Match 32.76%

I've had this dsl modem for a couple years now and have always to my knowledge been able to use it via only one ip number.i've been streaming video using webcamxp and other software/.today my modem began acting stupid by disconnecting once an hour and if I shut off pc of at all,i wind up having to manually reset the modem by unplugging it for a few seconds and then back in again.i eventually noticed that while the webcam is streaming video ,my lan connection on the pc shows the ip number i'm familiar with while my dsl modem shows one that's new(so to speak)..so I entered both ip numbers in to the webcamxp and found that the modem streams using either ip number..if I go to the what's my ipnumber site,it will display whichever number I have entered in to the webcamxp software//.is it normal for a modem to use 2 numbers as I don't believe this has occurred in my case before.i'm wondering if it has to do with the modem suddenly disconnecting now and then and too,having to reset it everytime I boot.i have att dsl ,no live landline just dead phone cord from the modem to the wall.
 

A:Modem with 2 ip numbers

If you have other devices and they also loose internet connection at the same time, I would recommend contacting AT&T.
 

1 more replies
Answer Match 32.76%

I have files that contain numbers in the name but when running a specific search...say for instance, "593" nothing is found.
 
I need search critieria info

A:Searching with numbers

Try using a program called "Everything"

2 more replies
Answer Match 32.76%

I have digitrex 2100 camera and the fool thing keeps saying serial # is wrong but am using one that is on the cd what to do?
 

More replies
Answer Match 32.76%

I HAVE mobile phone tools and I was able to synce my destroyed razor to get all all the numbers out of it once! But something happened to my computer and now i cant get my numbers out of my phone to put in my new razor! I work in south beach and i need my phone for work! Anyone that can help me i can guarantee you some of the best clubs (free drinks and entry if you help me! )
 

A:Help Lost All My Numbers

6 more replies
Answer Match 32.76%

Running laptop Dell Inspiron 2650 - not the one I'm using now. I try to type alphas - for example: i and get a 5, u and get a 4, o and get a 6, j and get a 1, k and get a two and so on. I look at the keyboard and the numbers are in small type right in the center of the alpha key.

How do I get back to the alphas only?

Thanks,
shortcut
 

A:numbers rather than alphas

Your keypad is activated. Look on your keyboard for the Fn key, then on your keyboard for a symbol that looks like a "number keypad". It is normally the Fn + F11 key, but without looking up the information on your system it may differ. To activate and deactivate, you have to hold the Fn key and press the key that has the number pad on symbol on it.
 

2 more replies
Answer Match 32.76%

So... I booted up my computer, logged in, and found this. (Not my picture, but this is what it looks like.)PictureI found the programs and deleted them, but they just keep coming back. I run Windows XP Home Edition. Could someone please help me?

More replies
Answer Match 32.76%

“A+ Certification for Dummies” describes the Pentium processor as having “a 32-bit address bus, 32 bit registers, and a 64 bit data bus. 7 pages later, it describes the Itanium as Intel’s “first 64-bit processor. “ I checked with an IT associate of mine, and he said the processor’s size refers to the address bus.” PC Guide” says it refers to the register size within the CPU. The article went on to say “every processor introduced in the last decade, from the earliest 386SX to the latest Pentium II or K6, is a 32 bit processor, based on this definition.” I know I’m ignorant, but I’m trying to understand. There are dozens of numbers on a cpu datasheet. Which one are they talking about when they say “It’s a 32 bit processor?”
 

A:What's up w/procesor numbers?

32 bit registers (up to pentium II/k6) > IA64 (itanium) > AMD64 (athlon 64)> EMT64 (intel)
 

1 more replies
Answer Match 32.76%

Hi. Just a curiosity question.
I just noticed that when I check my IP number with Firefox it gives me a completely different number than when i check with IE. Not only that it gives me a different country!!
I just want to know why that is. Why I'm getting 2 different numbers/locations with 2 diffrent browsers.
 

A:Question about Ip numbers

10 more replies
Answer Match 32.76%

I am in the market for some new RAM. But I can't remember the type I bought so I'm using CPU-Z to help tell me.

What I'm curious to know is what does "PC3-10700" mean? Is it just an identifier label? Does it represent speed or anything?

Currently CPU-Z says my RAM is PC3-10700 667 Mhz (1333?) DDR3. I'm trying to determine if I can buy PC3-10666 RAM and it will work.
 

A:Buying new RAM: what do the numbers mean?

Use the config tool at a site like crucial.com

Or use the motherboard brand/model to pull the specs of the motherboard and see which types are supported.
 

2 more replies
Answer Match 32.76%

Hi guys I'm new to the forum and I think it's great. My question is. Is there a program that will scan your hard drive and come up with all the serial numbers that your using on the hard drive. I'm using XP pro.
Thanks Mike
 

A:Serial Numbers

7 more replies
Answer Match 32.76%

I have a Lenovo when I go to gotomypc the keyboard types numbers instead of letters, it stays in sequence 0123456789 and repeats.

A:Letters to Numbers

Welcome to Seven Forums Jerrjames. Does this only happen in GoTo? If not, press the Num Lock key (or Shift & Num Lock ) to type the letter on keys that are shared with numbers. A Guy

9 more replies
Answer Match 32.76%

I noticed the amount of space left on this external hardrive and looked at the file size inside and it doesn't add up the recycle bin says its empty so where are the Gb 's
by my rekoning 776gb and 103gb = 879gb leaving a 52gb deficit from 931gb
Anyone?

A:Numbers dont add up!

Why not start with this. Lets see exactly what is on the drive
You can place the mouse (or click) on any segment to see the contents.
WinDirStat - Free software downloads and software reviews - CNET Download.com

9 more replies
Answer Match 32.76%

This is not a problem. Just a curiosity that I am unable to explain. Maybe someone has the answer.

1. When I look into Computer or computer management, the size of my system is about 16.3 GBs. The data is on another partition and there are no restore points - shadowstorage is zero.





2. If, however, I run WinDirStat, it shows my system size as 18.1 GBs. I fail to see from where the additional 1.8 GBs come from.

A:Curious numbers

Hidden files and folders perhaps?

3 more replies
Answer Match 32.76%

Hey everyone,

I am using build 7000. Is there a place where I can legally download the newer builds?

And do they require a clean install?

A:Win 7 Build Numbers

The only build that has been officially released by Microsoft is 7000. However, others have been leaked, viz 7022, 7048, 7057 and 7068 (and others). These can be downloaded via torrents (use Google). In all cases, the same product key will work. I recommend a clean install for all OSes, especially beta versions.

9 more replies
Answer Match 32.76%

Came home today and computer wouldn't type numbers. Num lock was on but turning off didn't help.

Kid had been playing games today.

Searched online and microsoft support had this recommendation for XP:

• Turn off the MouseKeys accessibility feature. To do this, follow these steps:
1. Click Start, click Run, type access.cpl in the Open box, and then click OK.
2. Click the Mouse tab, and then click to clear the Use MouseKeys check box.
3. Click OK.

I followed those instructions, rebooted and now i can type the numbers 5 and 6 but not seven or any other numbers. I do type a domain containing 5 and 6 from time to time and it will be in my cache so maybe that's why i can type these numbers only.

Any advice on how to cure this?

Thanks
 

A:Can't Type Numbers

I have seen infections mess up the keyboard some this might be that.

To download HJTsetup.exe To Download HijackThis go to the following: http://www.thespykiller.co.uk/forum/index.php?action=tpmod;dl=item5
Filename = 1137518044HJTsetup.exe
Save the file to your desktop.
Double click on the HJTsetup.exe icon on your desktop.
By default it will install to C:\Program Files\HijackThis.
Continue to click Next in the setup dialog boxes until you get to the Select Additional Tasks dialog.
Put a check by Create a desktop icon then click Next again.
Continue to follow the rest of the prompts from there.
At the final dialog box click Finish and it will launch Hijack This.
Click on the Do a system scan and save a log file button. It will scan and then ask you to save the log.
Click Save to save the log file and then the log will open in notepad.
At the top of the Notepad HJT log screen, hit Edit then Select All then click Edit and then click Copy doing that copies the text to the clipboard, you won't see it yet....
Come back here to this thread and Paste the log in your next reply. DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required.

A security expert should take a look at your log - please be patient.
 

3 more replies
Answer Match 32.76%

Here before me, I have two almost identical chips:

1) PCS-5300S-555-12-E3
2) PCS-5300S-555-12-A0

What's the difference?
 

A:What do the numbers on the ram chips mean?

1) Samsung PCS-5300S-555-12-E3 RAM 1GB each
Reference: http://cgi.ebay.com/Samsung-2x1Gb-2...egoryZ158896QQihZ002QQitemZ120384476683QQrdZ1

2) Micron Samsung PCS-5300S-555-12-A0 - RAM 512MB each
Reference: http://cgi.ebay.com/-1GB-Micron-Sam...ItemQQimsxZ20090317?IMSfp=TL090317202008r2749

Hope this helps
 

3 more replies
Answer Match 32.76%

Weird but since updating the driver on my ATI Radeon HD4800 card numbers have started appearing in the top right of two progs on my PC. One is Google Earth and the other is a plug in for Photoshop. The numbers are yellow or red and change at random with mouse movement. I'm not on any medication
I've attach a screen shot...
Any ideas?

A:Numbers top right of screen.

Welcome
Heres the story, and it happened to me too. I found the most current graphics driver. It made my screen twice as large and it could not fit on the monitor. Resolution changes and DPI changes would not help.
I would go back to the earlier driver. If it does not work use a system restore point.
System Restore - How to

7 more replies
Answer Match 32.76%

i need a serial number for windows vist home basic i lost mine thanks for the help

A:Serial numbers

Hello Sammy,

If you still have your Vista Home Basic installed and activated with your key number, then you can use the program below to retrieve it from within Vista.

Product Key Number

If you have a OEM (store bought) computer then the key number will be on a sticker on the bottom (laptop) or back (desktop case) of the computer.

Asking for a product key number is not allowed since this is advocating piracy. It will get you permanently banned, so do not ask for one again.

2 more replies
Answer Match 32.76%

Hello,

I need to put on pages sequential numbers. I know that MS Word can do that but the problem is that I need to put those number at several different locations per page, but not sure if Word can do that.

Is there way to do that in MS Word or is there dedicated software for that?

Please see the image. Thanks.
 

A:I need to put sequential numbers.

8 more replies
Answer Match 32.76%

#1 Chrome fattened last month?s slim lead over Explorer. Chrome now leads #2 Explorer 11.92%.
Edge grew .6%, passing Safari to regain the # 4 spot. Folks, Edge is not growing as fast as Windows 10, partly because upgraders get their old browsers upgraded with 10. After July 29, I expect Edge to grow even more, as people buy new computers with Edge as the default browser.

Browser market share

More replies
Answer Match 32.76%

I have some old hardware with an RS232 (9 pin) connection to my notebook. I have downloaded a driver for the Serial to USB converter, and my Vista Enterprise OS seems happy with it. However, the hardware only allows communication with COM ports 1 to 4, and as far as I can judge my USB ports are 8, 9 and 10. Can I renumber these ports to make communication possible, or is there another way of doing this?

A:Com Port numbers

What is the old hardware you are using?
What is the driver you downloaded?

I have found a program that may be able to help but I have never used it.
Advanced COM Port Redirector - Redirect all data sent from one serial port to any other serial port with Advanced COM Port Redirector.
As with all shareware be careful and read the licence before installing.

5 more replies
Answer Match 32.76%

Can Someone tell me where to find the Pin and PC numbers for my computer? I know they are on the sticker on the tower(Dell 4550), but which ones are which?

A:Need Some Help Finding numbers on my PC

Dell uses an asset tag number and an Express Service code. In addition, the COA/PID numbers should be on the case. Look at this page.

3 more replies
Answer Match 32.76%

This might be easy for some of you but I just don't know.
I printed up a "word pad" and got all of these numbers. What should I do to fix it.
 
«\StK1“a‡sˆ\Ýe±fÕ{ fPn¾t7lj\«0Ëf|iò\
c
 
Actually it is a whole lot more but I could not get it to put in better.

A:random different numbers

Have you tried to restart your computer and printer? If not do so, then try and print again.

4 more replies
Answer Match 32.76%

I have been trying to print out 150 pages with numbers in the header..100-250..I have followed instructions in help, but only get the first number..100.. printing out on each page..can someone help me please?
 

A:Page numbers

14 more replies
Answer Match 32.76%

This might be easy for some of you but I just don't know.
I printed up a "word pad" and got all of these numbers. What should I do to fix it.
 
«\StK1“a‡sˆ\Ýe±fÕ{ fPn¾t7lj\«0Ëf|iò\
c
 
Actually it is a whole lot more but I could not get it to put in better.

A:radom different numbers

Have you tried to restart your computer and printer? If not do so, then try and print again.

1 more replies
Answer Match 32.76%

Does anyone have "any" image resource numbers for Windows 8?

A:Resource numbers

I'm unsure what you are asking? Can you elaborate?

14 more replies
Answer Match 32.76%

Is there a way to validate hash numbers on an allready installed win7 ?

A:Help| Hash numbers

No, only the original .iso you installed from can be validated with hashes.

3 more replies
Answer Match 32.76%

Is there a program that I can run that will show me all my OEM numbers. I have a HP laptop that I installed a restore cd from a DELL cd and now it's asking me for this number (42 charactors) that I am sure I have on my desktop pc, but not sure how to extract that. I am thinking looking through my registry would not be an easy thing to do.
 

A:Solved: OEM Numbers

Hi and welcome!

Well, the answer to your question is YES, but what you are doing is illegal, so I won&#8217;t be able to help you. Besides that, if you enter the number and it does take it, you&#8217;ll have to ACTIVATE it and that should fail because the machine is already activated on the Dell system.

I figured I would at least fill you in on this before it sits unanswered for a longer period of time until the Admins get to it and close it.

Thanks and sorry&#8230;

Shane
 

3 more replies
Answer Match 32.76%

does anyone know where about in the registry serial numbers are stored.i uninstalled zone alarm pro,removed all registry entries,then reinstalled it a couple of weeks later and the serial was remembered.

A:Serial Numbers

Sometimes when you uninstall a program you have to make sure it deletes entirelly, sometimes they leave the main folder behind and that's why if you try to reinstall it will show you some of the options you had before, this may be the case.

Fen

6 more replies
Answer Match 32.76%

Hello. Please let me know how to make Excel work so that

IF
A1=B, then the number I put in is positive
A2=D, then the number I put in becomes negative automatically, in red font

Thanks.
 

A:IF and negative numbers

16 more replies
Answer Match 32.76%

I have an access 2003 form with a datasheet in a subform, there is a field in the subform that I need to enter 1.5 and so on, everytime I do, it rounds the numbers up. I don't want that to happen. I have tried a few things and searched a few things, but I am just missing something.

Help

Chad
 

A:Don't want the numbers to round up.

The number in the table's field is probably set to "Integer". Set it to Single or Double Precision.
 

2 more replies
Answer Match 32.76%

hi,

I got a question to be solved. Does anyone know how to write the code to increment the product number and pass it on to the next page, to be added to the database, so the user doesn't have to type it in? Basically, i want to take the last product number from the product page, increment it to the next number (the product number or any id's has to be hidden on the product page), so if the last number in the db is 0012 i want the next number to be 0013, pass it to the addprod page and show it on the form and then have it stored in the db with that particular product - so every product has a unique product number.
any help would be great

seema
 

A:ASP - incrementing numbers

I don't know if i understand your question (sorry for being stupid). The way i see it is that you want to let your users to add products (insert records) to your database with unique ID numbers, is this right?

If it is, its a simple operation, especially if your using MM Ultradev.

What are you writing the script in, ASP, Coldfusion, PHP, etc.? And what database are you using, Access, SQL?
 

2 more replies
Answer Match 32.76%

Hi, first off all, apologies if im in wrong section.

Using Notepad ++ batch code I am trying to make a simple RPG. I need to simulate rolling dice to get a random number that is different each time I run it. Sometimes it will be a six sided dice, sometimes a 4 sided or more.
Can anyone help please.
 

A:Random numbers

Could you post the code you have thus far?

Aside: Is there a reason it has to be done in Batch? It's not exactly the most powerful language out there, and I fear that this won't be the last time you find yourself frustrated by its limitations.
 

5 more replies
Answer Match 32.76%

Conficker is still the most prevalent malware threat accounting for 17% of all malware, according to Check Point?s ThreatCloud World Cyber Threat Map between January and June 2016.

Cryptowall is still the most prevalent of all ransomware, accounting for a 44% share. Cerber, Locky, Teslacrypt and TorrentLocker all hold significant market share.

When it comes to banking trojans, Dorkbot still holds the lead with an infection rate of 31% which makes it the sixth most prevalent malware. Dorkbot is followed by Zeus with 27%, and Tinba, with 16%.

As far as mobile malware, Hummingbird leads the pack with an astonishing 72% infection rate.

?The first half of 2016 demonstrates the nature of today?s cyber-threat landscape,? Check Point noted. ?Many old malware threats remain prominent, while at the same time, newcomers arrive and take the world by storm. On top of that, malware demonstrates a long-tail distribution with a small number of families responsible for a major part of the attacks, while thousands of other malware families are rarely seen. Lastly, we see that most cyber-threats are global and cross-regional, with the top threats appearing in all three regions."

Source: Info Security
 

More replies
Answer Match 32.76%

Hello
I am pretty new to web creation. I am using FrontPage2000
I am checking my efforts with web tools (currently checking at http://www.echoecho.com/toolhtmlinspector.htm)

Question
How do I determine the line number in the HTML page?
(I tired counting, but that didn't seem to do the trick - I tried to copy & paste to Word & number the lines - nope)
I saw a post by 'HexStar' and she had an image listing line numbers - would love to know who to have that kind of view

I am trying to fix some syntax errors and the reports indicate examples such as -
line 27 Error: empty container element <P>.
line 77 Error: illegal context for <INPUT> - must appear in <FORM> element.
I am not worried about the errors at this point, just how to identify the line number (I want to 'try-fail-try again' to learn how to correct the errors myself)

Thank you
 

A:line numbers?

7 more replies
Answer Match 32.76%

Can an IP number (NTL) be the same for two different senders of emails.
 

A:IP Numbers Emails

7 more replies
Answer Match 32.76%

I make 3D animated movies using Maxon Cinema 4D.

I have seen on the www's what looks like screen grabs of possibly HDD's content showing arrays of hex numbers. It would be cool if I could get a text file of such data to use as content on a screen in one of my projects. Any ideas ?

A:Hex numbers for use in animation

Something like this?

Matrix

or any of these

1 more replies
Answer Match 32.76%

I have a Toshiba Satellite #L455 and when I press the letter keys I get a number. I have tried pressing the fn and f11 keys together and that has not worked. Please help.

A:Numbers instead of letters

Hi kdwswbabby welcome to TSF,

Have you installed anything around the time this happened? Do you have guardedid installed or constant guard or something similar?

1 more replies
Answer Match 32.76%

I inserted page numbering in a long word doc. And when I viewed it in "print layout view" the number clearly showed at the bottom of the page. But when I printed the doc - no page numbers.

Any ideas?

StanC
 

A:Numbers don't print

How low at the bottom of the page? Some printers have difficulty when you print very near the edge.
 

3 more replies
Answer Match 32.76%

I spent the evening trying to brush up on what all the numbers mean for purchasing memory. I am pretty compfortable with the Cas Latency and the other numbers such as ?4-4-4-12? (lower is better is my understanding) What I don?t have a handle on is the other numbers e.g.

OCZ Platinum Revision 2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory

DDR 800, what do I make of this number ?(800)?? Do I try to match this with the Motherboard Specs if it says ?Memory Standard
DDR2 533/667/800 and up to 1200 MHz?

And what about ?(PC2 6400)? What does this all mean?

I am putting a Christmas list together to do an upgrade,(budget = $1000) the following components are what I am considering for purchase. There is so much ram out there, it will make your head spin. This aspect seems to be the most difficult for me to figure out. I want to get the most bang for my buck. I am using this new PC for gaming, I don?t really dabble in overclocking, but it would be nice to go for it. Here is the list so far.




MOBO option 1:EVGA 122-CK-NF68-A1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard

MOBO option 2: GIGABYTE GA-P35C-DS3R LGA 775 Intel P35 ATX Intel Motherboard

MOBO option 3: GIGABYTE GA-P35-DS3R LGA 775 Intel P35 ATX Intel Motherboard REV 2

CPU: Intel Core 2 Q6600 GO stepping

Video: EVGA NVIDIA GeForce 8800 GTS 640MB 16X PCI Express

Power Supply ADD-ON: Thermaltake W0099RU PurePower Power Express ... Read more

A:Confusing Ram Numbers

Hello, Fakum, and welcome to Techspot :wave:

Please take a look at the following threads to make your experience here as enjoyable as possible

Message for all newcomers

SNGX1275's Guide to making a good post/thread

The Techspot FAQ

If you could take a minute to fill in some of your profile information that would be helpful to all members of the forum
Knowing someone's location in the world can be extremely helpful, even if you just put a country.

Also remember to post any problems or questions that you have in the appropriate forums

With regards to your question, the "800" refers to the clock speed of the ram (in MHz). As long as your motherboard is compatible with it then i think you'll be ok.

The rest of your hardware sounds good, you'll need more than a 250W psu though.
 

2 more replies
Answer Match 32.76%

Hi Everybody

I have an annoyingproblem in my Excel 2003. I will enter numbers like $53.34, $2.70 etc thenafter I go to the next cell the numbers will automatically go the next highestdollar $53.34 to $54.00 and $2.70 to $3.00 etc.

And then when I addtotals in a column the total will also go to the next highest dollar.

Is there anysolutions for this?

Thank You
 

A:Excell Numbers

Hiya is this any good.http://www.google.co.uk/url?sa=t&rc...14DIBg&usg=AFQjCNGsZR5QEwoE5wuIvuQv48XxIG8jLw
 

1 more replies
Answer Match 32.76%

Could someone please tell me what all these temp. readings are for.

Which one is for CPU?

Thanks in advance.

p.s. I hope I did the screen capture right. Its my first try ever.
<img src="file:///C|/intl.%20free%20XXX/corel.gif" width="415" height="476">
 

A:can someone explain all these numbers to me.

Your screen shot isn't showing up, did you upload it with the attach file option on the lower part of the reply window.

Just hit the browse button next to the file attach window and upload the screenshot
 

3 more replies
Answer Match 32.76%

XP has a habit of remembering which com port numbers have been used before to other devices in the past. This leads to funny situations where com port numbers that are allocated to a new device seem to be high in number (sometimes greater than 20, very often greater than 10).

Is there a registry fix to force the operating system to cancel port numbers where devices are no longer detected, thus enabling new allocations to be in a sensible range of numbers

thanks for any help
joe

More replies