Tech Problem Aggregator

XP wont load/Computer wont start

Q: XP wont load/Computer wont start

Nothing will load on my Compaq Presario 700 notebook. It wont even turn on in safe mode.
When I go to turn it on it sounds like the hard drive attempts to spin. I don't hear the fans, but all the lights come on. The battery is fairly new and everything is plugged in properly.
All this began when I was running Macromedia Dreamweaver MX and it locked up forcing me to shut down.
Any ideas?

A: XP wont load/Computer wont start

8 more replies
Answer Match 94.5%

Hi,
None of my internet browsers including Internet Explorer, Google Chrome, mozilla or the new one that comes with Windows 10 will open or load. Also when I click on my Windows start button it does nothing as well as the dialogue next to it that says I'm Cortana ask me anything. I have run Malwarebytes anti-malware and it has identified 0 threats. I have adware antivirus but it won't run. Any help would be appreciated thank you!

More replies
Answer Match 93.24%

The other day I updated my laptop which is a Dell Inspiron 17R running Windows 7 home premium, when I updated the computer booted ok took longer than usual, I restarted the laptop but this time it wouldn't boot up, it came up with a black screen saying repair windows(recommended) or start windows normally, I clicked repair windows it said searching for problems, attempting repairs this took about an hour and a half but unfortunately did not resolve the issue I sent the error report to windows, I restarted the laptop again,  attempted booting it in safe mode no luck and the same other various options I can try but no luck they all just crashed the laptop and began restarting it,  tried repairing it again and this time it took my to a screen with various options like load backup open cmd and format my hard drive, loading the backup did nothing and  wasn't sure what to do with cmd so decided to part ways with my stuff and format the hard drive, I did this and the laptop was formatted but the OS was still on the hard drive and it was like the first time I opened it all of my personal things were gone but win 7 home premium was still there, I set it back up again installed AVG anti virus etc downloaded a few movies ran fine the next day it said windows updates need installing so, I  did , 145 updates were made  turned my laptop back on and again it was booting up and crashing followed the steps I mentioned before noting was working after messing around wit... Read more

A:Computer wont boot, wont boot in safe mode, wont load repair centre

Hello there,
 
It seems like you did not perform a clean installation of Windows and that's why your system is acting up. 
 
Follow the steps below to install a new copy of Windows:
 
1. To format your hard disk during Windows 7 installation you will need to start or boot your computer using the Windows 7 installation disc or USB flash drive. Insert your Windows 7 disc in your CD/DVD drive. Please note: will need to restart or turn on your system with the disc in the drive. 
2. After turning on your system with the CD in the drive go ahead and press any key when prompted during your computer post routine and then follow the instructions presented on screen. If you don’t see this go back to step 1 to setup your BIOS to boot from CD or USB flash drive depending on your installation media.
3. On the Install Windows page simply enter your preferences and click next.
 
4. Accept the Windows license agreement.
 
5. On the “Which type of installation do you want” page go ahead and choose the “Custom” option.
 
6. Select Drive options (advanced) on the “Where do you want to install Windows” page.
 
7.  Select the partition that you want to change, choose the formatting option you want to perform and then follow the instructions.
When allocating space choosing the default MB size for your drive is typically the best for most users since you want to take full advantage of all your disk... Read more

6 more replies
Answer Match 90.72%

When I startup windows I recieve several pop up messages saying programs are being shut down. I then get more pop ups errors messages. Basically something is doing something that wont allow me to open or load my programs in windows. When I click on a program it starts to load and then stops with no reason.

I have attached my hijack log so pleaes if anyone can help let me know...

Thanks!!!!!

Logfile of HijackThis v1.99.1
Scan saved at 1:10:41 PM, on 1/25/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
c:\program files\common files\logitech\lvmvfm\LVPrcSrv.exe
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\Program Files\Common Files\AOL\TopSpeed\2.0\aoltsmon.exe
C:\Program Files\Common Files\AOL\1140478547\ee\services\safetyCore\ver210_5_2_1\aolavupd.exe
C:\Program Files\CA\PPRT\bin\ITMRTSVC.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\PROGRA~1\mcafee.com\ANTIVI~1\mcshield.exe
C:\Program Files\mcafee.com\personal firewall\MPFService.exe
C:\Program Files\Pure Networks\Network Magic\nmsrvc.exe
C:\Program Files\Pure Networks\Router Service\pnroutsv.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\wanmpsvc.ex... Read more

A:Need Help! Programs Wont Load -computer Wont Run Correct... Hijack Log Attached

Closing thread...please do not double post.

1 more replies
Answer Match 89.46%

hey guys well i have had this issue for a while
Computer specs (Desktop) PackardBell Istart 2311 with 3gb RAm (two matching pairs x1gb and 2 original 512mb in)

okay so i had my computer turned off for two weeks and came back to it and turned it on it came up on to the packardbell screen frozen i took it off and turned it back on it loaded vista until it crashed again and now when i load it up it just stays on the same screen packardbell screen it seems its frozen, so i checked out stuff on it and was advised by a techy its the internal hard d rive thats failed i need a new one i have purchased a western digital 640gb and installed that i had the same issue until i took out all the ram and put back and it started to work what i relaised later is that my old seagate 160gb hdd drive works too.

but issue now is that the computer still freezes ive checked all my ram they seem like they all work and load up i the first slot

well i checked out all the ram slots when i put them in it all works until i put in 4th slot any ram it makes beeping sound i have tried everything and yes im putting it in right if it works with all the ram in it crashes after a while i assume its the forth slot but now it doesnt accept ram in the forth slot why does my computer freeze on

heres a example of what my start up screen looks like

( http://www.hardwarezone.com/img/data/articles/2008/2750/Packard_Bell_BG46.JPG )

its beocming annoying and wasting money as technicians are money grabbers and do... Read more

A:Computer Wont Load up frozen start up screen RAM problem

Hi sorry you seem to have a poor impression of techs lets hope we can help you and possibly change that, 2 things come to mind,the slot is bad ie damaged in some way or the ram is,when you tested the ram in the slot did you try only 1 stick, try 1 of the others in it if it works ok then it is the ram that is the problem,if not then it is the slot,you can run with 1 less stick of ram,also check that the ram all matches as this would throw up a similar problem
 

1 more replies
Answer Match 89.46%

When I start up my pc, I get a screen that says, "We apologize for the inconvenience, but Windows did not start successfully, a recent hardware or software change may have caused this, ….etc."
Then I am offered with a bunch of options to either:

1) Start in Safe Mode
2) Safe Mode with Networking
3) Safe Mode with Command Prompt
4) Start Windows Normally
5) Last Known Good Configuration

None of them work, the safe mode ones, show a bunch of lines of code as per normal when starting up safe mode, then it freezes and stops and eventually goes back to the screen mentioned above. Same for 4 and 5, windows blue loading bar screen comes up, then the screen turns black and nothing. After a few mins my computer restarts again and goes back to the screen mentioned above.

Prior to my computer not being able to restart/load windows. I had some pop up vundu trojans i was trying to remove. Did some research after about 5 hours finally removed it. A couple days after i started receiving "generic host process error" Something to do with explorer.exe program. So i ctrl + alt + del and explorer.exe was taking up 100 cpu usage. At this point i tried to minimize task manager and my computer froze up. I waited about an hour came back and still nothing so i manually turned off my computer and turned back on. And now it will not restart. I have no idea where my windows xp disks are or even if i have them. I found what appears to be the solution to my explorer.exe pr... Read more

More replies
Answer Match 89.04%

Yesturday my vista was working great, and on the screen as i went to shut it down said "updating files do not shut down computer 3/3 100%" but it stayed like that for 4 hours, so i turn it off manualy once i turned it back on the next day it asked me for my password i put it in and as it was loading it was vey slow and would take 5-6 minutes for programs to load up.

Also when i go to click on like my internet it dont work, not even my games work, they try to load then freeze. So i did a scan on it and its still having this problem. After i got frustrated i went to shut it down again and it says "logging off" but stays like that for hours, so i have to manualy turn it off. Now with internet issue, it works in safe mode with connection, but not in my normal screen. WHY IS THIS DOING THIS?

More replies
Answer Match 88.2%

So I turn my computer off one day only to find it wont start the next day. I open the case up and see the led is on. I flip the switch on the power supply off then on and quickly press the power button. My computer starts but the following time I shut down the computer it again wont start and now the led is blinking. I've never had any issues like this before, any help would be appreciated.

I don't routinely use many usb devices, only my mouse and keyboard and every now and then my ipod. I figure the issue is likely either the power supply or the motherboard. The ps is almost two years old while the motherboard is only about three months old.
 

A:Computer wont start, power supply wont start, blinking led

It sounds to me like your PSU is the problem, get a hold of another and plug it to your computer and see if that will make it start, if it doesn't it might be BOTH your motherboard and PSU. A bad PSU will burn a motherboard.
 

5 more replies
Answer Match 85.68%

guys,

my computer wont boot and still it wont display.
i already changed a video card and stil it wont.
it have no beep at all and it will not display.

what should i do?
 

A:guys my computer wont start and wont have a display

does it beep any. if not this will indicate more major problems. (unless you dont have beep speaker installed) a mother board is programed with a set of beep to play if there is a problem like such as three beeps if the ram is not working, 1 long beep if the vid card is not working etc etc. I DO NOT KNOW WHAT YOUR BEEPs WILL BE. if you are not getting these then you need to find out why. see if you have a speaker inside your case. if you do and all of your fans spin but still no action from you pc then you may have a larger problem such as mother board or processor.
 

2 more replies
Answer Match 84.84%

Backstory (skip if you need)
I'm fixing someones laptop, It was slow and taking 30 minutes to startup, i did the usually virus scan and restarted, then it was stuck in an auto repair loop. I used a windows 8 Install CD from microscoft. None of the options in it would work, install (key doesnt match) reset (missing partition), image recovery (cant find an image), restore (no restore point), etc.
 
Used command prompt, did stuff like bootrec, bcdedit, diskpart, and chkdsk. After it ran chkdsk it finally loaded windows. I reset/reinstalled the OS completely. Fixed, restarted, running smooth. Owner said it was working great for a day, then after turning it back on it was in an auto repair loop.
 
Now
It's stuck in a preair loop, I can't even boot from the 8 CD! Have it configured in the bios, it shows the the blue windows logo then the screen goes black for 3 minutes and a blue screen flashes for 1 second saying  "Your PC ran into a problem and need to restart. Collecting some info (0% complete) search online for error: 0x000021a"
 
The weird thing is, Windows 7 disks boot fine, but it's "not compatible". And if I physically remove the HDD, it will boot into the windows 8 CD. So I put the HDD back in (while still at the command prompt) and it wont take my commands in related to the C: . I get a "System cannot find the drive specified"
 
I also tried hooking upp the HDD to my PC SATA, it shows in explorer, but just right clicking it crashes explorer.exe. D... Read more

A:Windows wont load, Boot CD wont load, Automatic Repair Loop

UPDATE:
 
I got a windows 8.1 disk made and it allowed me yo boot from the CD, but it's SLOOOOW, it takes minutes to load reset or w.e (none of them still work), or open the command prompt.
 
I ran chkdsk /f /r /x but it didnt help. chkdsk /r ends with:
"A disk read error occurredcc0000185
Insufficient disk space to fix the Usn Journal $J data stream."
 
Before when I ran it, I'm pretty sure it let me restart and booted into windows, not now.
 
Next I tried bootrec.
/fixmbr - succesful
/fixboot - succesfull
/rebuildBCD - Total identified Windows installations: 0
/scanOS - Total identified Windows installations: 0
 
Next bcdedit
Nothing worked "The boot configuration data store could not be opened. The requested system device cannot be found."
 
Next sfc /scannow
"There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again."
Then sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\Windows
"Windows resources protection didnt find integrity violations"
 
BCDBoot c:\WindowsFailure when attempting to copy boot files
 
Next diskpart - but I forgot what I did before that may have worked. All i can remember is I had to select a disk or volume, and do something with it.

1 more replies
Answer Match 82.32%

Ok i recently was infected with spyware but I installed a firewall called Panda and immediately started acting weird, so I said to myself ok uninstall it, no matter how long I leave the remove programs box open it wont load, so its just empty and Icant remove it, when I try by opening the program then clicking on the uninstall it will say error, my computer wil also not open internet explorer, it opens it just doesnt load, the only way i can go on the internet is if i right click on the icon and click start without add-ons, and it also wont shut down!!!!!!!!! please help, i have no clue what to do

A:Help Computer Wont Shut Down And Wont Uninstall Programs And Wont Open Internet Explorer, Please Help!

Did you came from HijackThis Logs and Analysis forum? Else I would suggest you to read up here and post a HijackThis log for malware experts to take a look. If they declare you clean and you still having such problem, then you can come back here and post your question again.

1 more replies
Answer Match 80.22%

Tried this last week with a 333fsb pc chips board. Didnt work figured the board was broke, bought a new one for my friend cuz i felt so bad we couldnt get his computer to boot. Its the biostar m7ncd (not pro) it has up to a 400fsb (www.biostar.com.tw) Anyway here is what we are using.

1gb stick of 333 2700 DDR ram (house brand) also tried swapping it with my old stick of 512 ddr ram that I got at best buy still didnt work.

geforce ti 4800se (albatron)
samsung 100gb hard drive
mitsumi 54x cd burner
biostar m7ncd
athlon xp 2700+ with volcano 8 heatsink/fan

tested all of those parts minus the processor in my motherboard and they all worked fine.

loaded windows xp professional sp1 on his hard drive in MY computer hoping it would boot on his... no such luck. It says "safe mode, safe mode with networking, last known good config, start windows normally" after any of those are selected it takes a second then it goes back to the geforce card bios screen (restarts)

I set the FSB to 166 and the bios shows it now as a 2700+ and the ram it says is ddr 333 which it is, however it only displays it as one gig of ram if I disable quick boot, then it either says its 2gigs or half a gig. Every once in a blue moon on a start I get a cmos checksum error however the ram works in my m7vig biostar but it runs as 266 ddr ram cuz of the 266fsb max on that board.

anyways I even tried formatting the drive then trying to load windows on it on his computer and as soo... Read more

A:OS wont start/load

I've built all of mine and my friends computers in the past with very few errors, but its these new faster frontside bus motherboards that are confusing the hell out of me, i really dont know how the play with ram/cpu bus speeds

3 more replies
Answer Match 80.22%

I hope it's kosher to post a link to another post I made in the XP forum (I'm only doing this because someone suggested I do). I dont think I have a virus/malware problem, but maybe someone here will recognize it.http://www.bleepingcomputer.com/forums/top...tml#entry844517ThanksUPDATE: I just finished running the a-squared command malware tool and all that it came up with was 19 cookies.

A:Failed To Load Dll, No Start Menu, Programs Wont Start, Etc

Please try using this to repair the broken registry entry that may be causing this.Download Autoruns, search for the related entry and then delete it.Create a new folder on your hard drive called AutoRuns (C:\AutoRuns) and extract (unzip) the file there. (click HERE if you're not sure how to do this.)Open the folder and double-click on autoruns.exe to launch it.Please be patient as it scans and populates the entries.When done scanning, it will say Ready at the bottom.Scroll through the list and look for a startup entry related to the file(s) in the error message.Right-click on the entry and choose delete.Reboot your computer and see if the startup error returns.

4 more replies
Answer Match 79.38%

Hello, well I am trying to reformat my computer once again, somehow it got deactivated when it is ALREADY activated, but when I restart with my Windows XP Home CD in the drive, it wont read it when the computer is starting.. Any Suggestions? Thanks.

Also for that XP Activation

I log in and then it pops up saying its not activated and asks if I want to activate or not so I click the activate button and then it says something of this sort "You Are Already Activated".
 

A:Disc Wont Load On Start Up

For booting the Windows CD, it may be that you need to change bios settings in order to get a boot. Shut your system down and power on, during POST (Power On Self Test - this is the bit before the Windows splash screen), press F2 lots, and the setup menu should load. If not, try the Delete key, then some other combination of mashing the function keys to get the right one.

How your Bios is laid out, depends on your motherboard, but the aim is to enable CD Boot, (usually simbolised with a tick against it), and prioritise it above Hard Drive. This will be on the main screen, or in a seperate boot menu, the commands for editing selections appear along the bottom.
I was looking around for something similar to your error and found

http://support.microsoft.com/default.aspx?scid=kb;EN-US;328874

It seems whilst this is not exactly your situation it may be worth following
Code:
6. Click Start, and then click Run.
7. In the Open box, type the following command, and then click OK.
%systemroot%\system32\oobe\msoobe.exe /a
8. Click Yes, I want to telephone a customer service representative to activate Windows, and then click Next.
9. Click Change Product key.
10. Type the new product key in the New key boxes, and then click Update.

If you are returned to the previous window, click Remind me later, and then restart the computer.
11. Repeat steps 6 and 7 to verify that Windows is activated. You receive the following message:
Windows is already activated. Click OK to e... Read more

1 more replies
Answer Match 79.38%

ok im a way newbie at all this so be patient with me please.
when i boot my computer up and log into my profile the only thing that shows up besides my wallpaper is the cursor arrow, explorer.exe will not load on its own i have to do the ctrl+alt+del go to task manager then run new task and get explorer.exe to load. After that everything runs fine until we log off then we go thru the same thing again.
i have a lot of disk space left (my pc only using 5%) but its running slow at the begin, after load explorer run fast again. If anyone can offer me any help on how i may fix this problem i would appreciate it.

My os is windows xp pro SP3 updated, as a matter it all began after the updated (30 updates from microsoft).
i use norton corporate edition 10, microsoft antispyware, spysweeper daily (and the PC is really clean). if i need to give u anymore info please let me know what info and maybe how to find that info as well please.
Other thing I open regedit and in:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

At the value is shell=explorer.exe.

A:Explorer.exe wont load at start up

Try doing this, Open windows explorer > click tools > Folder options > view tab > uncheck the box next to launch folder windows in a seperate process and then restart. If it is already unchecked then check it first, restart, and then uncheck it and restart. I've encountered this problem before and this was how it got fixed.

2 more replies
Answer Match 79.38%

So yeah, I've been having this issue for the past couple of days. The site "www.subscene.com" or "www.hotmail.com" wont load on any browser i tried ping and the request times out, 100% packet loss, I've checked with my ISP (frankly they aren't that helpful). i did a fresh Win 7 64 bit install and still not working.

Any help would be greatly appreciated.

Thanks in Advance.
Korlain.
 

A:Solved: Some sites wont load and online games wont connect.

8 more replies
Answer Match 79.38%

Hi, ive just updated windows vista it said that it was done and would restart itself however it didnt and now it starts to boot up and then crashes on a blue screen which flashes so quick that i cant see what it says. I've tried to go into safe mode, boot from last configuration point also being through F8 to try this and still crashes on this blue screen. Any help would be much appreciated.

Thanks
Sarah
 

More replies
Answer Match 78.96%

not sure if im in the right place
but computer wont do anything but load up with options to do system repair or whatever its called but it says it cant fix the problem i dont have disc for it or any pw's im on a reg user account it wont load in safe mode but by doing different things i have access to do various things but not sure what or how to lol i had issues before and got them fixed by using sites similar to this any help is appreciated

A:system repair wont work windows wont load

Might be a failing Hard drive. Get to your bios and see if there is any diagnostics there to do a hard drive test. On some motherboards its delete on others its F2. If there is no diagnostics on the bios i would make a USB bootable diagnostics and do that.
I just had the same problems and found out the hard way that it was a hard drive.

9 more replies
Answer Match 78.12%

having problem with the computer with programs not loading or updating , or it hang up , havent really done anything to fix it yet

thanks

More replies
Answer Match 78.12%

Our family computer is randomly having trouble connecting to the internet when loading some web pages or web pages wont load. I occasionally have the same problem with my laptop but never at the same time. Which leads me to believe it is not likely my router. Would that be correct? My wife plays alot of games from Yahoo Games. Could that be a source of some of the problems?

I have some of the tools I believe will be needed to clean the system loaded to my desktop ready to go. I need some direction to be sure I don't go out of order and cause a bigger problem.

Thank you

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:06:32 AM, on 9/18/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\WINDOWS\arservice.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\Common Files\Intuit\Update Service\IntuitUpdateService.exe
C:\Program Files\iWin Ga... Read more

A:Randomly wont connect/pages wont load

16 more replies
Answer Match 77.7%

Hey,

Last week windows xp had a popup error stating that I had "worm.win32.netsky" and "trogan spm/lx". I used norton tools to remove the "worm.win32.netsky". After that, I used the norton emergency disk to boot in safemode to do a full system scan. The scan found nothing. Since then windows xp will not start up. I get the load screen to select the user. Once I select any user it says "loading user settings" and then right after "saving user settings" and stays at the user select screen. What should I do?

More replies
Answer Match 77.7%

can start my pc up and it will get to the system start up blue screen, but it wont load that screen. i left it for like an hour and still nothing.
I tried going in in safe mode and this worked, but i need an internet connection
I thought maybe it has too much stuff on that account, ie hogging memory so i deleted a lot of stuff like 30 gigs of stuff but it still wont load
I need the internet connection at home so i tried going into safe mode with networking (i think that gives a net connection but maybe it emans something else)
i have ran spy bot s&d and deleted everything, also 2 other programmes + ms anti sypware new beta
thinking it was a virus but it cant be.

i tried a lot of the options you get in F8 but only the normal safe mode seems to work. i cant do a system restore as i deleted them yesterday as they were like a few gigs of stuff on it and i cant seem to find my xp cd so i cant reinstall windows, at least for 4 weeks as ican get a copy when i get home.

Any ideas what to do?

even if it just get me an internet connection in safe mode as thats all i need really.

Also its win xp
 

A:help, my start up screen wont load except in safe mode

6 more replies
Answer Match 77.7%

Computer Specs: Windows 7 professional - SP1 - 64 bitAMD FX 8350 @ 4.0 GHZ Processor16 GB RamAMD HD 7900 cardIE11 Issue: About two days ago, IE stopped working.  When I hit the icon, I would see the hour glass telling me the CPU was processing then nothing (never opened). What I did in an attempt to resolve: - Ran from the defualt directory thinking the shortcut was corrupted - Ran (updated) virus scans with SuperAntiSpyware and with Malwarebytes.  There was no viruses detected. - I "reset" or "reloaded" IE by going to control panel-->program-->Turn windows feature on/off - I turned IE off then on again Additional Info: - It should be noted that Iam now using firefox and I seem to have a lot of adds popping up - all from "Dealexpress"   - I did update windows yesterday but only after I encountered the issue - I do concider myself more knowladgeable about computers then most so dont be afraid to ask me to do something. Please help - TY in advance BQ

A:Issue with Internet Explorer - wont start, load, or run - Please help

Reset IE to its defaults. To do this perform the following:
 
Go to Control Panel
Go to Internet Options
Click Advanced Tab
Select Reset button at bottom
Make sure everything is checked and hit ok
After if completes Try opening IE
 
You may also want to run a full system virus scan. I recommend Malwarebytes

5 more replies
Answer Match 77.7%

So I turn on my pc, and in this profile when I start up the desktop doesn't load. I press CTRL ALT DELETE and i notice that explorer.exe is at a 100% usage. I can only hit new task in order to open any windows. I've looked online to find something...but nothing works...maybe you guys can figure it out.

its mem use is 11,377K

HJT log:

Logfile of HijackThis v1.99.1
Scan saved at 12:19:22 PM, on 7/6/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton AntiVirus\IWP\NPFMntor.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\System32\ScsiAccess.EXE
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\system32\taskmgr.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\WINDOWS\system32\ctfmon.exe
C:\WINDOWS\system32\devldr32.exe
C... Read more

A:Desktop wont load HELP!, explore.exe at 100% usage @ start up

bump up for you;
I can't advise on fixes, but a few are there that need doing.
We'll assume you've used spybot/adaware and done an online scan?
 

1 more replies
Answer Match 76.86%

When i try to load counter strike source it just chrashes back to the start menu.
i have tried defragging it aswell as cachéing the files im unsure what to do please help
 

A:CSS wont load when i try the window crashes back to the start menu

what processor do you have? what ram do you have? what graphics card do you have?
it should tell you in control panel - system .
update your directx?
update your graphics card drivers?
do a registry scan?
 

2 more replies
Answer Match 76.86%

I had this problem just yesterday and found the solution (i dont know if its the same cause for the problem in all reports but its the same symptoms as mine for sure, i have XP tou)

here is a closed thread about it that didnt reach a solution, i hope mine works for most ppl that had this problem (i hated it lol)

http://forums.techguy.org/windows-vista/615994-web-browser-does-not-work-2.html

Anyway the thing is i downloaded FileAssassin in someone else's laptop and tried to kill the only process in my task bar that I didnt recognize (after looking for it it, before erasing it, it was one of nod32's dll) earler in the week my nod32 installation froze mid way tru, I didnt mind it but when i noticed earlier today that i had ekrn in my taskbar i tried uninstalling it but i couldnt (before i thought it didnt install so i didnt bother again with nod because i was busy), thats when i downloaded FileAssassin.

FileAssassin couldnt kill it by normal means so instead i set it with FA to erase it upon reboot/reset, all the esset files that i couldnt delete normally, i think it amounted to 4dlls in my C Esset folder and my C Windows Prefetch folder

they all had EKRN in the file name so they were easy to spot using windows's search function.

After that all my browser functions were restored. ekrn is nod's firewall afaik, but it still surprises me that it started running even tou my install froze at midpoint.
 

More replies
Answer Match 76.86%

All of a sudden I get page redirects to Advertisement sites and none of my antivirus software will work.here is my log. I pray you can help me out, Thanks!!Logfile of Trend Micro HijackThis v2.0.2Scan saved at 1:29:49 PM, on 5/2/2009Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16791)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exeC:\Program Files\Bonjour\mDNSResponder.exeC:\Program Files\Diskeeper Corporation\Diskeeper\DkService.exeC:\Program Files\Java\jre6\bin\jqs.exeC:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exeC:\WINDOWS\system32\HPZipm12.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\wuauclt.exeC:\WINDOWS\AGRSMMSG.exeC:\Program Files\Synaptics\SynTP\SynTPEnh.exeC:\Program Files\iTunes\iTunesHelper.exeC:\Program Files\NETGEAR\WN511T... Read more

A:Web Page Redirects and Antivirus and Spyware wont load or start

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.comDDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the resul... Read more

2 more replies
Answer Match 76.86%

I have a windows 7 notebook that won't load into windows or load safe mode successfully its ends with a black screen and hangs forever. System restore wont even fix it. What command can I use to troubleshoot this other than reinstalling windows. Thanks

A:windows 7 wont start up or load safe mode successfully

If you have an install disk and can access Setup (possibly tapping F2 as you switch on) to change the Boot order to CD/DVD before the HDD, then insert the disk - Save and Exit, it will then reboot up with it and you will be prompted to press any key to boot from CD/DVD.

Select the Repair option and then Startup Repair in the Recovery Environment.

It will give you the option to select a restore point which you can opt for or pass on that and let it complete the Startup Repair.

If it reports that it was unable to repair, then you could give the restore point a try.

8 more replies
Answer Match 76.86%

i have ran into this error b4 on other machine but now that i have it on mine i cant find the fix for it. i know there is a registry edit out there to fix it but i cannot rember what it is. if anyone can help me i would be there best friend forever. here is my hijack log.


Logfile of HijackThis v1.97.7
Scan saved at 6:31:26 PM, on 8/25/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\D-Link\Air USB Utility\AirCFG.exe
C:\Program Files\WZCBDL Service\WZCBDLS.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE
C:\Program Files\Yahoo!\Messenger\YPager.exe
C:\Program Files\Windows NT\Accessories\WORDPAD.EXE
C:\Program Files\Internet Explorer\IEXPLORE.EXE
C:\Documents and Settings\Administrator\Desktop\HijackThis.exe

O2 - BHO: (no name) - {AA58ED58-01DD-4d91-8333-CF10577473F7} - c:\program files\google\googletoolbar2.dll
O3 - Toolbar: &Radio - {8E718888-423F-11D2-876E-00A0C9082467} - C:\WINDOWS\System32\msdxm.ocx
O3 - Toolbar: &Google - {2318C2B1-4965-11d4-9B18-009027A5CD4F} - c:\program files\google\googletoolbar2.dll
O4 - HKLM\..\Run: [D-Link Air USB Utility] C:\Program Files\D-Link\Air USB Utility\AirCFG.exe
O4 - ... Read more

A:msn wont sign in and hotmail wont load

i also cannot access any microsoft pages so any links to fixes there will not help

1 more replies
Answer Match 76.44%

I am having trouble with internet explorer (the newest edition) When I try to open it, it opens up, my homepage wont load and everything becomes non responsive the tool bars, file menus, even the "x" to close the window wont work. It completely freezes up. Worse yet, other users on this computer are having no problem using internet explorer when they are logged on to their side of XP. Why is it that when im logged on to my user name on XP that internet explorer wont work? I need help quick as all my favourites are saved in IE and I need to access some pages very soon. Im using firefox right now, and absolutely hate it. Please help me.

thanks, help soon im goin crazy trying to figure it out.
- O

A:IE Wont load (will load for other users using computer)

Hi IEProblem, welcome to TSF..

what happens when you run IE without add-ons?

- Right click the IE applet on your desktop and select 'Start without add-ons'

2 more replies
Answer Match 75.6%

ok this is my problem , when i try to load up my computer it boots then when it trys to boot the windows screen it starts making a clicking noise and a slightly zooming noise then goes to a blank black screen with a blinkin cursor in the top left corner of the screen. Whats wierd is the noise stops when the blank screen loads n only starts making the noise when it trys to boot up the windows screen.

Any help is very much appreciate n ty in advance

 

A:Computer wont load

8 more replies
Answer Match 75.6%

Not sure which forum to post this in as not sure what the problem is.

I have a Toshiba Satellite Pro running Windows 7 SP1. It shut down due to Windows updates and when it booted up again it just hung on the Windows icon but wouldn't load. Eventually it asked if I wanted to run a repair which I did but it said it couldn't repair it.
Using F8 I found that I could boot into safe mode, and safe mode with Networking.
I ran the System Scan which said that Windows Resource Protection did not find any integrity violations.
I tried to do a restore to a previous point but it said I didn't have any points to restore to.
I then ran a CHKDSK which came back saying volume is clean but just hung for hours. I eventually forced a shutdown but now it wont load at all even in safe mode. When I try to load it, it just hangs whilst loading windows files.

What do I try next? Help.
(I also have no external drives or devices attached)
 

A:Computer wont load

As with many 'proprietary' built computers, you don't get a DVD of Windows ... which makes it near impossible to recover from disasters such as you are experiencing ... instead, you were expected to make your own 'recovery' disks. Your manual would/does tell you how.

If you don't have a set of recovery disks, then I can only advise contacting Toshiba, or, maybe install Linux.

 

9 more replies
Answer Match 75.6%

my computer starts up, load up XP, but when its time to get to the log in window, the computer shuts down. it pops a little error windows and shut down less then a second after that. does anyone know what is going wrong and if there is anything i can do to fix it or should i just format the hell out of my computer?
any help would be gladly appreciated. thanks
 

A:computer wont load up...

10 more replies
Answer Match 75.6%

my sisters computer is infested with viruses so i downloaded malwarebytes and mse and updated them, i changed her computer setting to safe mode and rebooted and was planning on trying to rid some of the viruses. now the computer lists all the drivers it's loading and freezes after it gets to drivers\CLASSPNP.sys
it sat there for about 10 minutes so i restarted it and it gave me the option to start windows normally, or in safe mode. if i choose the latter, i get the same problem as above. if i choose to start it normally, it lists all the drivers like before, gets to classpnp.sys, then goes to a black screen saying the computer is loading in safe mode with minmal services. then it goes to a black screen and just sits there. All i did really was change from normal startup to safe mode now i cant load windows or something. Anyone have an idea? 
 
 
Help appreciated

A:help - computer wont load?

I have moved your topic to AII and marked it as 'Unbootable machine'.
 
This may mean it takes a little longer than normal to get you help, but you will  not e forgotten.
 
Chris Cosgrove

4 more replies
Answer Match 75.6%

Lets start from the beginning..this is the kids pc and it wouldn'r boot W2K stating something was missing (I can't remember what this was as I started trying to get this machine going over a month ago)...long story..erased the HD and was going to reload W2K. Would boot up far enough to say it couldnt read drive A. Went into BIOS and changed it to boot to CD only....starts to load and shuts down - then it won't power off.----> Sometimes it will power off to reboot and sometimes not. Once I actually got it to start booting windows to have it stop 1/3 of the way in. So I thought HD...they had a crappy 6.8 gb in there anyway. Replaced HD today added memory and I am still having the same problems. I am thinking power supply, motherboard or processor. Where do I start without feeding excessive money into this project and pulling all my hair out?
 

A:Computer wont load OS

6 more replies
Answer Match 75.6%

Hey i finally got annoyed last night and disk defragged my machine. All went well, switched it off after it was done.

However now it wont load up. It posts etc, gets to the windows splash screen then brings up the bit that says, Windows didnt shut down correctly, boot in safe mode, last know good settings or just boot up windows.

I have tried each option several times, but the damn thing wont booot up.

Any suggestions will be gratefull. If not then ima just go f-disk it and reinstall everything i guess.
 

A:Computer wont load

12 more replies
Answer Match 75.6%

Hi there, am staying @ my parent's and looking after their house whilst theyre abroad. Yesterday I decided to have a little play on my dads computer which runs on windows xp, I installed the sims duluxe edition and the sims living it up and played on them for about 10mins. Everything was fine, shut down the computer etc. Today I went to turn it on and windows will not even load. The start-up screens come up and it says there was a power-failure could not start properly perhaps due to software/hardware changes. However it wont even start in safe mode, none of the options work the computer just reboots itself and goes back to the same screen. I think there was a power cut last night but am pretty sure its something to do with the game I installed. Please help, my dads going to kill me is I cant sort it out!
 

More replies
Answer Match 75.6%

I have a P3 866 socket 370 I put a geforce 2 video card in my computer last night and it didnt work so i took it out and now my computer freezes up and it says CMOS/GPNV checksum bad. How do i get my computer to log up?
 

A:Computer wont load up

16 more replies
Answer Match 75.6%

So I decided to manually edit my Virtual Memmory and i accidentally put it to 2000 and 4000 and now nothing loads on my computer. I cant even get to my desktop now(im using my brother's computer to type this)

So, how do i fix this problem? I cant reformat becuase i dont have the disc...

A:Computer Wont Load UP

Have you tried booting into Last Known Good Configuration ?

-1. Turn on your computer

-2. Keep pressing the F8 key while it boots up to get the Boot Menu (Safe Mode, Last known good configuration, etc will be listed in it)

-3. Use the arrow keys to highlight Last Known Good Configuration, and then press ENTER.

See if that helps resolve your problem...

3 more replies
Answer Match 75.6%

Last night I updated windows 8.1 from windows 8.
It got to the stage where it needs to restart so it done that started the configarations and once it reached 100% it restarted.

Since then what happens is when i press power on the samsung logo comes on the screen then the black screen with the windows picture then the bsod comes up for around half a second and it restarts. then it constantly does this.

The whole cycle only takes a few seconds.

Ive tried booting in safe mode but this isnt working so I downloaded kav rescue on another computer and saved it on a flash drive, But it wont boot off this either.

Any ideas?

A:Windows wont start after 8.1 update wont boot in safe mode

What does the BSOD state? Most times it is a driver issue with the Display drivers. Other times it is hardware.

3 more replies
Answer Match 75.6%

Hello,

Today I noticed that I could not open my start menu with neither the windows button, ctrl + esc, or a click of the mouse. I've also had a problem the last couple of days saving/opening files in one of the programs I used to make music. I tried to go into safe mode to do system restore, but the safe mode didn't boot. It scrolled all the system files on the screen but then just stopped and nothing happened.

So, I tried the other option (forget what it's called) that lets you perform various other system restoration tasks. I brought up the system restore screen from there, but got an error that said something about corrupt files so it could not perform the restore. I checked again, and all my restore points had been deleted.

Lastly, when I click computer, all the drives are blank with no names beside them, only the icons. I can still click them and they seem to be functioning normally, so I don't know if there is a relation to this. I don't know if some registry files were deleted or if there is some other problem. I didn't notice the start menu/safe mode/blank icon issues until I just recently installed the latest windows update.

Sorry if this seemed a little long winded, but I would appreciate help from anyone.

Thanks,
adub2b23

A:Safe mode wont boot, Start menu wont appear and various other problems

Hi -

Try a repair/ install - http://www.vistax64.com/tutorials/88...all-vista.html

Regards. . .

jcgriff2

`

2 more replies
Answer Match 75.18%

I got a new p4 3 gig with hyperthreading pc. For a while it was working like a charm, on overdrive. But only after a week of use, I started to have problems. While playing very visually demanding games (Battlefield 1942, Medal Of Honor) I would keep gettin those dreaded blue screen of death thingies. I would get one of 3 errors. One said, "IRQL_NOT_EQUAL_TO_OR_LESS_THAN" another said, "PAGE_FAULT_IN_NONPAGED_AREA" although im not quite sure about the NONPAGED part, i know it said non something. And the other one I think I only got once and cant remember exactly what it was, it had something to do with IRQ.

Now on all of them it said it was shutting down my pc to avoid hardware damage. Which it did, I had about 3 seconds to read the screen before my pc shut down. After a while, It got so bad that I would get an error while just browsing the internet with explorer. I tried taking out my vid card and using the on-board video, didnt work. I dont remember if xp stopped starting or not, but I decided I should format my hd to fix the problem. I only have the xp upgrade cd so I had to install win98 first. Win 98 installed fine, except that on the first startup after installation my pc resarted itself and I got the "failed startup, choose an option" thing, I chose normal start up and it worked fine. So then I tried to install xp again. I got to the part where it restarts to install xp from the files copied from cd. During that installtion phase, It said... Read more

A:BSOD errors, xp wont start, reformatted, xp wont install.

16 more replies
Answer Match 74.76%

No matter what option i pick in the safe mode list, the computer will not start. when i choose any of the safe modes, (safe mode, safe mode with networking etc) the computer displays a list of random commands (i dont understand any of it) and then restarts. If I try to Start Windows Normally, or use last settings that worked, it seems to start loading, and then restarts.

Any ideas?
 

More replies
Answer Match 74.76%

Scan Devices, please wait...
press <tab> key into user window
Serial_Ch0 master: no device
Serial_Ch1 master: no device
my computer will turn on and go through the normal first screen for my vid card then it goes to another black screen and comes up with that error then it moves past that screen and on to a blue on where my mouse freezes as an hour glass and that is the end of it lol that is where i have to reboot it. very rarely can i get it to start in safe mode so i can actually look things up and post here lol
the 2 fans and the one on my vid card are all working fine
I have new ram in it that has been tested ok
i have a Ge Force 7900 gs with updated drivers
the motherboard is Asus Via K8T800 Pro Chipset
Windows Xp
and no idea what my hard drive make is <edit> i think this is my hard drive Samsung SP1213N SCSI disk
i know my way around a puter pretty good but this is stumping me and has been going on for about 2 weeks and i still cant figure it out i would love any input i can get
 

A:Computer wont load comes up with this error....

oh i did have a ram that wouldnt run in duo but it would run single (that is what the computer store told me ) if this makes a diffrenece as to why its not working both of the rams are now changed with new ones that i have tested on the site someone suggested
 

2 more replies
Answer Match 74.76%

I could use some help... our old desktop with Windows XP will not boot up. I belie e the main hard drive was running out of capacity and my son loaded a new program. Next time the computer was started it would .it load up Windows xp. Can you tell me what steps to correct this? Is it possible that the hard drive is crashed? If so can I recover the data from it?
 

A:Computer wont load Windows XP

Assuming it's a factory-brand one and not a custom/home-made one, what's the brand name and model name and model number of that computer?

Do you have the Windows XP disc for it, and does it contain any of the 3 service packs?

Did it come with Windows XP Home Edition or Professional or Media Center Edition?

Is the 25-character product key on its COA sticker readable?
(Do not submit that number here)

---------------------------------------------------------------

We're not there, so you need to advise us exactly what happens when you try to start that computer and load Windows XP.

---------------------------------------------------------------
 

14 more replies
Answer Match 74.76%

On my roomates computer whenever she tries to laod a new page the url wont automaticaly load. For example if she wants to check her e-mail, after she types in her password it wont automaticaly direct her to her e-mail inbox. But instead a different screen pops up and reads something like "Internet Explorer cant automaticaly load new URL's, please check your browser settings" Exactly how do I change the browser settins? I already tried playing around with the internet options, but that didnt seem to fix the problem. Is there anything else I need to be doing?

A:My roomates computer wont load URL's

Hello Bug,

Sorry to hear about your Roomy's troubles. Several things she should do first just out of principle. Update definitions and run a complete virus scan. If any viral activity is found, post the name of the virus and the location of any uncleanable files. Download, update and run SpyBot Search and Destroy from the link in my sig. Be sure to close out all browser windows before doing the scan. You can also run adaware too as it sometimes will find things that SpyBot S&D won't. Once you've done all that, reboot the computer. Download Hijack This and post a HJT log for us to look at.

Edit: We may not find the problem by doing this, but at least we've eliminated a bunch of things from the list. So, lets give it a try!

1 more replies
Answer Match 74.76%

My SIL has messed this up badly. I am very good at following directions and usually figuring out computer problems, but now I cant do anything. The computer boots, shows windows XP loading and then stop. No error message. No blue screen. NOTHING. Just empty dark blackness. And I am at a loss what to do. I know they have viruses on their computer and I was trying to help them get the computer fixed. Now I dont know what to do. Any help for a lost newbie?
 

A:Need help! Computer wont load or run startup AT ALL

11 more replies
Answer Match 74.76%

Hey Everyone.

My dads computer has just stopped working for some reason. I can normally figure out why it doesnt work, but this time I cant..

So this is what i've done.

I've started up my dads computer, it goes to the black screen with "Safe mode" "Safe mode with networking" etc etc. I clicked the bottom one (Load micrsoft xp normally blah blah blah)

It gets to the start up screen, then it just restarts itself. I thought, huh. Lets try Last Known Config, but it restarts itself like I stated earlier. I then tried booting it in safe mode, and safe mode command prompt. It still doesnt work, but what I did notice, a blue screen with some writing pops up just before it restarts, but you can read it because it restarts after like a less than a second.
My dads computer is a Windows XP pro by the way.
Thanks everyone who helps me.

oh, btw. I can take a video of what happens if you guys want, if you cant figure it out. Thanks again.
Edit: sorry if this has been asked before.

A:Computer Wont Load Up Properly.

Do you have an XP installation CD?
Have you tried a bootable diagnostic utility from the hard drive manufacturer's website?

7 more replies
Answer Match 74.76%

I have a Dell 9100 Dimension desktop with Windows xp. Today i switched on the power. The screen brough up the Dell image and a load bar appeared. As the computer loaded up it gets stucks permanently i.e. the bar gets one third filled (white bar). Ive tried removing plugs reloading many times etc. Ive tried inserting a Windows xp cd and whilst it seems to be reading it nothing appears on the screen. Help!

A:computer wont load Windows XP

Paul, welcome to TSF.

Can you confirm that it's the Dell load bar that gets stuck, and not the XP loading bar??
If it's the first Dell screen, then check the Diagnostic Lights on the back of the tower. There will be 4 circlular lights numbered 1 to 4, or lablled A to D. Check what sequence is (they should be all green for a normal working towers) and compare what they mean in this Troubleshooting guide:

http://support.dell.com/support/edoc.../D86630LRs.pdf

3 more replies
Answer Match 74.76%

I had been trying to fix my computer because there was a virus on it. The virus was a trojan fake alert where popups would keep coming up saying that i needed to download antivirus protection. After using norton and avast, i thought i had fixed the situation and turned off my computer. This morning i turned on my computer and NOTHING loaded. The background was there and thats it. The icons and the taskbar didnt even show up. please help me!! is the virus still on here?! and what do i do to have my computer fully load?! and is my computer gonna crash if i dont fix this soon?
please help me out. thanks

A:Computer Wont Fully Load

try a system restore to an earlier date before the problems started
once you get in check for infections by following the 5 steps here
http://www.techsupportforum.com/index.php

1 more replies
Answer Match 74.76%

i plug my iPhone into my computer and nothing happens...doesnt come up in iTunes and nothing appears in My Computer, it works fine on my laptop but not my computer

Ive seriously tried everything they say to do on the Apple support site and nothing is working

ive checked device manager to see if anything appears when i plug it in and nothing.

can anyone help please, thanks

A:computer wont load my iPhone

Have you created a new user on your computer, and then tested to see if things work?

7 more replies
Answer Match 74.76%

I use an HP a720n and lately I've been having some problems.

A few days ago it started to make the noise that it makes when shutting down (maybe the hard drive stops spinning). It would do that several times and basicly freeze up. The mouse will still move but programs can't be opened.
Now it won't even boot up. An error message appears that says file windows/system32/config/system can't be loaded.

I run 2 250 gig Western Digital Hardrives and do a lot of video editing, but the external drives have there own power supply. A few months ago I installed an extra 512 stick of Kingston Ram, and it ran fine for months before it started recently acting up.

I ran an antivirus program on it and came up with nothing.

Could my hardrive have crapped out ?
PSU maybe?

All help is appreciated. Thanks.
 

A:Computer wont load, other problems

It sounds more like an OS or registry problem.

Do you have an OS disk?
 

2 more replies
Answer Match 74.76%

Hello,i want to empty my computer,i have the win XP cd and i have put it into my cd drive,but when i start the computer it wont load the XP setup,so how can i put it to open?
 

A:cd wont load when computer is starting

16 more replies
Answer Match 73.92%

My computer got turned off whem I turned it back on it said autochk not found it said skipping autochk it then starts over and does the same thing ive tried safe mode everything didn't work. What can i do

How long does this take

My computer got turned off when I turned it back on when it was loading it said autochk program not found skipping autochk then it never let's me log in it just keeps restarting

I need help getting my computer started

A:my computer says im missing files and wont load

What is the computer make and model? Did you try the repair option or system restore to a known working configuration?

5 more replies
Answer Match 73.92%

So the power went out and the computer shut off... next thing you know I turn it on it goes to the usual intel p5w DH Deluxe screen and then it sits there and doesnt move for hours. I tryed everything and it wont work. I pressed f8 and f10 nothing... it says press delete for set up and still it wont take me to the setup screen. Any answers on how to boot it up even in safe mode??

A:Windows Xp Computer Wont Load Up Helppppp

Seems like something got damaged during the power outage. Do you use a surge suppressor or a UPS?

40 more replies
Answer Match 73.92%

--------------------------------------------------------------------------------

i have an intel core 2 e4400 2.0ghz proccesor, 3 (1)gig sticks of ram and an intel dg965wh board

I was recently trying to manually set memory timings and set the cas latency to three, originally five but later changed to four with no ill affects.
Restarted the computer and heard three beeps meaning a memory error, computer never loaded not even bios, then reset the bios by removing the battery. same issue, still hear the beep codes nothing loading
 

A:memory timings set to low, computer wont load

Just how did you change the memory timings? I checked the manual for that board and it says "No changeable options" under memory settings in the bios.

Have you tried to clear cmos with the clear jumper? If not, follow this procedure.
1 Unplug the pw cord from the pw supply
2 Hit the ON button 1-2 times [this removes any residual charge from the pw supply caps]
3 Clear cmos with the clear jumper for a min of 30sec
4 Replace jumper to keep position
5 Reinstall pw cord and pw ON system
 

3 more replies
Answer Match 73.92%

when I try to load my computer, the computer loads but the monitor does not. I end up having to do a hard shut down and reload the computer then it usually works fine. I have tried a new cable and monitor but it does not fix the problem. I have checked the graphics card and it says it is working properly. I have run windows troubleshooter to check for errors but none are found. What could be causing this. I am running windows 10 but it was a windows 7 originally, the problem has been happening for a couple months now and i upgraded when windows 10 first came out so I don't think the upgrade is the problem either.

More replies
Answer Match 73.92%

hey guys,

My computer wont load windows, when i turn it on the nec screen flashes for a split second then it just goes to a screen with a flashing dash in the top left corner.
The only menu i can seem to access is the system setup screen if i press ctrl alt del then tap the f2 button.
I also cant find my windows disk (i bought my comp brand new about 5 years ago but i dont think it came with a disk)

I read that replacing the battery in side the pc could fix it, is this true?

Also i unplugged all unneccesary devices


cheers, Andrew

A:Computer wont load ,just a flashing dash

bump, please.
sorry if ive bumped to soon but it been over 72hours, looking foward to hearing from one of you guys soon.

thanks, Andrew

2 more replies
Answer Match 73.92%

I have this computer it goes to the login screen,i long in,and then it jus loads...it does that like 4 times a month,then i have to go in safe mode then shut it back off and lastly retart windows normally what could this be

i have Malwarebytes and avira Running and they dont pick up anything. so i dont know
 

More replies
Answer Match 73.92%

My computer was in fine working condition 3 days ago i play a computer game called lord of the rings online i have been playing this game for about 4-5 months on my computer running it on ultra high graphics setting( the highest) i did the same with age of conan. Now i can barely even load the game to log into the server even with the settings on as low as possible it is impossible for me to play
my internet has been loading slowly as well and anything i try to load from the internet is very slow or does not work
my interent randomly switches to the "work offline" feature in which i have to go and click it off and open and close my internet explorer multiple times untill i get lucky and it works

this did not start to happen overtime 1 day it was working the next day it was not. I have no clue what the problem is if ya'll could help i would be very grateful thanks!

here is the thing yall asked for
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2:15:46 PM, on 4/29/2009
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18226)
Boot mode: Normal
Running processes:
C:\Program Files (x86)\Linksys EasyLink Advisor\LinksysAgent.exe
C:\Program Files (x86)\Steam\Steam.exe
C:\Program Files (x86)\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files (x86)\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Program Files (x86)\Webroot\WebrootSecurity\SpySweeperUI.exe
C:\Program Files (x86)\Internet Explorer\iexplore.... Read more

More replies
Answer Match 73.92%

hello and thanks for taking a look at this. I just purchased "Record Now MAX" from Future Shop (brand new). I went to load it (auto load - but manually loading it doesnt work either) but a box pops up saying ...:

16 bit Windows Subsystem
C:\WINDOWS\SYSTEM32\AUTOEXEC.NT. The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application.

My computer meets and exceeds all the system requirements and I don't know whats going on. PLLLEEEAASSE HELP!! Thank you!
 

A:Solved: My computer wont let me load my new software!

Check this MS article:
http://support.microsoft.com/default.aspx?scid=kb;en-us;324767
 

1 more replies
Answer Match 73.92%

For the past 18 months my pc wont boot up but after going into safe mode a few times i eventually get to my desktop i have re-installed windows 7 and had a partition on my hard drive if i buy a new hard drive and load windows onto the new drive will this solve my crashes i thought the motherboard was faulty but the error message i sometimes receive says it is to do with a registry problem.

A:computer wont load windows on boot up

A new drive and a fresh install is a great starting point.

9 more replies
Answer Match 73.92%

Hi guys, right before my exams i got a message saying somehting like "sata hard drive error" and then wouldnt load up after i had shut it down. So a month after my exams i have returned to attempt to fix it or atleast know if it is fixable. I dont have a windows installation Cd for it. Im using windows Vista. The problem from the startup repair is identified as all this mumbo jumbo below. Anybody know how to help? Thanks in advance!

Problem Event Name: StartupRepairV2
Problem Signature 01: AutoFailover
Problem Signature 02: 6.0.6001.18000.6.0.6001.18000
Problem Signature 03: 6
Problem Signature 04: 327685
Problem Signature 05: CorruptVolume

Problem Signature 06: CorruptAcl
Problem Signature 07: 0
Problem Signature 08: 1
Problem Signature 09: FixAcl
Problem Signature 10: 0
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033

A:Sata HD Error - Computer wont load up :(

Hello and welcome back to the forum..

Do you have a friend or family member that's close to you using the same OS, if so you can creat the vista restore disk's from there...

Create a Recovery Disc

System Recovery Options

System Restore

6 more replies
Answer Match 73.92%

I believe my computer is infected with Zero Access Root Kit. My computer wont run except in safe mode. I cant run hijack this. I have OTL Log. Thank Yo for your help. OTL logfile created on: 9/23/2011 12:24:17 PM - Run 1OTL by OldTimer - Version 3.2.29.1 Folder = C:\Users\hpcore\Desktop64bit- Home Premium Edition Service Pack 1 (Version = 6.1.7601) - Type = NTWorkstationInternet Explorer (Version = 8.0.7601.17514)Locale: 00000409 | Country: United States | Language: ENU | Date Format: M/d/yyyy 3.80 Gb Total Physical Memory | 3.30 Gb Available Physical Memory | 86.83% Memory free7.60 Gb Paging File | 7.11 Gb Available in Paging File | 93.53% Paging File freePaging file location(s): ?:\pagefile.sys [binary data] %SystemDrive% = C: | %SystemRoot% = C:\Windows | %ProgramFiles% = C:\Program Files (x86)Drive C: | 450.59 Gb Total Space | 403.64 Gb Free Space | 89.58% Space Free | Partition Type: NTFSDrive D: | 14.87 Gb Total Space | 1.86 Gb Free Space | 12.50% Space Free | Partition Type: NTFS Computer Name: HPCORE-HP | User Name: hpcore | Logged in as Administrator.Boot Mode: SafeMode with Networking | Scan Mode: Current user | Quick Scan | Include 64bit ScansCompany Name Whitelist: On | Skip Microsoft Files: On | No Company Name Whitelist: On | File Age = 30 Days ========== Processes (SafeList) ========== PRC - [2011/09/23 11:45:02 | 000,582,656 | ---- | M] (OldTimer Tools) -- C:\Users\hpcore... Read more

A:Zero Access Root Kit Computer wont Load!!!

Here is the DDS.txt log:

.
DDS (Ver_2011-08-26.01) - NTFSAMD64 NETWORK
Internet Explorer: 8.0.7601.17514 BrowserJavaVersion: 1.6.0_27
Run by hpcore at 18:55:30 on 2011-09-24
Microsoft Windows 7 Home Premium 6.1.7601.1.1252.1.1033.18.3894.3195 [GMT -3:00]
.
AV: AVG Internet Security 2011 *Enabled/Updated* {5A2746B1-DEE9-F85A-FBCD-ADB11639C5F0}
SP: AVG Internet Security 2011 *Enabled/Updated* {E146A755-F8D3-F7D4-C17D-96C36DBE8F4D}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
FW: AVG Firewall *Disabled* {621CC794-9486-F902-D092-0484E8EA828B}
.
============== Running Processes ===============
.
C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Program Files\SUPERAntiSpyware\SASCORE64.EXE
C:\Windows\system32\svchost.exe -k NetworkServiceNetworkRestricted
C:\Windows\Explorer.EXE
C:\Windows\system32\ctfmon.exe
C:\Program... Read more

3 more replies
Answer Match 73.92%

Im trying to help my sister fix her emachines computer. It will not load the windows screen and it constantly keeps trying to restart. It wont load in safe, safe with networking or last known good configuration. I tried to run the emachines recovery on the system and it seems to get hung up on a please wait screen. I dont have the CDs that came with the system. Is there any way to fix this?
 

A:Computer wont load windows screen

10 more replies
Answer Match 73.92%

I have posted on another site for help but I am getting slow answers and I want to get more or better feed back.

My computer crashed last night and failed a physical memory dump. It will no longer load appropriately, in that it takes 15 minutes to load safe mode or regular. It has a click then beep in a very consistent pattern. it is not rapid but consistent, this only occurs when trying to boot the computer. When I do get the computer to load in safe mode or regular it no longer shows my files, images, applications, and documents. Instead, it shows an NPR-User with basic factory style programs such as CTest. However, when I go into the start menu and click computer the hard drive shows the exact amount of free space as when i was using my computer before the crash. WIth advice from the other site I have created an ubuntu cd and selected the Try It option. It can not recover any files as it only shows the NPR-User and Ctest files. I am a college student, I dont do anything ridiculous with my laptop, I need it for school, and I need help.

Known Specs:
Toshiba Qosmio x500
Windows 7 Ultimate
6g Ram
Nvidia video card (unsure of model)
2 hdd
Intel I-7

A:[SOLVED] My computer crashed and now it wont load

Hi and welcome to TSF,

You have no backups at all?

You can try unhide it may be able to recover the files if hidden link below:
Unhide.exe - A introduction as to what this program does

Backup immediately if files are recovered.

If you go to the driver update pages for your toshiba on their website it may have an update for your hdd firmware.

Some seagate drives have suffered from this and update is all that is required to eliminate only known it on dell studio's tho.

You have checked the second hdd to see if any important data is on there?

6 more replies
Answer Match 73.92%

hey guys,

My computer load windows, when i turn it on the nec screen flashes for a split second then it just goes to a screen with a flashing dash in the top left corner.
The only menu i can seem to access is the system setup screen if i press ctrl alt del then tap the f2 button.
I also cant find my windows disk (i bought my comp brand new about 5 years ago but i dont think it came with a disk)

I read that replacing the battery in side the pc could fix it, is this true?

Also i unplugged all unneccesary devices


cheers, Andrew

A:Computer wont load flashing dash

also what is the proper boot device priority, i changed it hoping it would work

2 more replies
Answer Match 73.08%

when i turn on my computer it loads fine at first but then stops after the background icons taskbar all load fantastic except the only thing you can do is drag the little highlight box around or switch highlighted icons with the arrow keys

A:computer wont load processes after it loads explorer

Hi Wizard,

Can you boot in to Safe Mode at all? If so, do you have the same issues?

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Windows 2000 / XP users:

As the computer is booting, tap the "F8 key" continuously until you get the "Windows Advanced Options" menu. Use your arrow keys to move to "Safe Mode" and press your Enter key.

Trouble Getting into Windows 2000 or Windows XP Safe mode - If after several attempts you are unable to get into Windows 2000 or Windows XP Safe Mode as the computer is booting into Windows, turn off your computer. When the computer is turned on the next time Windows should notice that the computer did not successfully boot and give you the Safe Mode screen.

4 more replies
Answer Match 73.08%

My computer has a virus on it called svchost.exe. My computer will boot and stuff normally and the "Welcome" screen comes on and it starts loading my background desktop and stuff and all of a sudden a box comes up saying "Personalizing Settings: C:// .... svchost.exe." Can someone help me?

A:Virus wont let my computer load past welcome screen!

Hi and welcome to TSF.

My name is Iain and I will be helping you clean your system.

You may wish to Subscribe to this thread (Thread Tools > Subscribe to this thread) so that you are notified when you receive a reply.


svchost is usually a critical system file and must not be removed - however, it can become infected or copied elsewhere.

I'd like to see a log if possible, before doing anything else. Can you boot to Safe Mode?

Download GMER Rootkit Scanner from here to your desktop. It will be a randomly named executable.Before scanning, make sure all other running programs are closed and no other actions like a scheduled antivirus scan will occur while the scan is being performed. Do not use your computer for anything else during the scan.
Double click the exe file.
The program will begin to run, and perform an initial scan. If possible rootkit activity is found, you will be asked if you would like to perform a full scan. Click No.
In any case, after the initial scan is complete, click on the Save button, and save the log file somewhere you can easily find it, such as your desktop, and attach it in your reply.

1 more replies
Answer Match 73.08%

Hi

I have a LG R500 running windows Vista home premium it was also the originally installed OS and came pre installed on the system and has never been re-installed.
I belive it is 32 bit and is almost 3 years old and is running the factory power supply LG 90 W.
Im not sure about the CPU, Video card, or the motherboard.

What is going on is when I turn the computer on the microsoft Corp loading screen comes on then the blue screen of death (or at least that what I think it is) flashes for a split second to fast to read it then I go straight to Windows Error Recovery screen. If you try to start it up normally again the same error occurs. I have launched the startup repair and it tells me Startup Repair cannot repair this computer automatically. So I have tried everything in the system recovery options except for the command prompt becasue I am unfamiliar with it. This error occurs in safe mode as well. I have not tried any of the other options except safe mode as I am unsure of them.

On another note I was having problems with the computer freezing prior to this but after a couple days of updating and virus scans I felt I had it fixed and seemed to be working properly for about a week. In this time windows was telling me I was having a problem with an intel driver and when I tried to download and intall the new driver as recomended by windows couldnt get it to work but seemed that the computer was fixed without it. When this problem was occuring it seemed to be w... Read more

A:BSOD Flashes and computer wont load Vista

Hi-

Please run a hard drive diagnostic, see here for info: http://www.carrona.org/hddiag.html

Then back up any data using ubuntu, follow instructions here: http://www.howtogeek.com/howto/windo...dows-computer/

Then from the command prompt run: SFC /SCANNOW

If the problem is not resolved try reinstalling windows.

Regards,

Mark

1 more replies
Answer Match 73.08%

Hi all,

For a while in our house we were using only US Cellular Broadband connect, which is essentially a mobile 3G USB adapter. We uninstalled this from all the computers when we recently got Charter cable internet which is being broadcasted wirelessly with a Netgear cg3000d-rg. I know that the US Cellular broadband turns off wifi connectivity, but we made sure to uninstall all the drivers and software. We have 2 comps running XP and one Macbook, all able to connect to the new router. One Acer Aspire One is the holdout. It connected wirelessly fine before, but now will not work. It says it's "connected" and assigns an IP, but no matter what browser it will not load any webpages.

Here is some info below:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Sandra>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : acer-6e40e97492
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR5007EG Wireless Network Ad
apter
Physical Address. . . . . . . . . : 00-23-4D-9D-D6-14
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.0.5
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Add... Read more

A:Solved: One Computer Wont Load Webpages, All Others Fine

Got this all fixed. Driver would not work with new router.
 

1 more replies
Answer Match 73.08%

Hello everyone! I have a fairly big problem, or atleast I believe it is? I recently bought a used Gateway Computer. (It runs on windows vista service pack 2 & no disk came with it.) Everything was great for a week or so, until I started to watch netflix & received an error saying I need to uninstall Microsoft Silverlight & try to watch another movie so it could prompt reinstallation. I done as it suggested, but when the computer went to restart it wouldn't load past the windows screen. I shut it down & when it restarted I pressed F8 & went into safe mode w/networking. After some research I attempted system restore (starting at the last point before the update & ending with the last restore point I had available) but it didn't help at all...I then tried the "repair your computer" option from the F8 menu, but it loaded up to a blank square (instead of user profile) that said other user. I've tried all the users on the computer, but get the same error "the specified domain either does not exist or could not be contacted." I had to remove the battery to get the computer to shut off, I had no other option. I started the computer in safe mode again & attempted the Gateway Recovery, but it restarted & took me back to the blank square page...The computer isn't apart of a domain, so I'm pretty much completely lost...Please someone, anyone help!

A:Gateway computer wont load normally, only in safe mode?

can you try running msconfig? Click the startup tab, and let us know what things are checked.

4 more replies
Answer Match 73.08%

Hi. I have a Abit-BE6 mobo and my computer crashed. I got a new hard drive and it isn't recognizing my new HDD. I got a Maxtor 200GB OEM. I have it as the slave and my floppy as master. I think that is ok but for some reason it isn't recognizing it. I Then attempted to put it as master and put it to the mobo without the floopy as slave. It recognized it but when it went to load windows it gave an error message that said something like that it couldn't read it or failure. It said i had no hard drive when i put it as slave, it wouldn't recognize it any where. I need the hard drive to load windows and get my computer running. It is also PATA/IDE. I also have no software so i don't know what to do. Please help, i want my computer running again!

JACK

:hotouch:
 

A:My computer wont recognize my harddrive to load windows. Help!, please

lets start from does your MB bios support this large drive check with maker?
do you have a working hard drive with OS on it
try just booting like normal (remove new drive)
now if that works
make sure this older drive jumpers are set to master on first ide cable
make sec. drive slave on 2nd ide cable if you have a cdrom make that master
on 2nd ide cable.
after adding new drive watch boot screen should show the 2 drives
if not reboot go into bios see if you can forcr bios to recognize drive.
 

5 more replies
Answer Match 73.08%

Hey, i thought i wiped my computer yesterday and i let it sit over night and when i woke up it was 97% done, once i got back for breakfast it was sitting at the screen the first pops up when you boot up your computer with the alienware sign and a circular loading animation. Its been sitting all day and it hasnt moved on yet, Any ideas on what could be happening or what i could do to fix it?

A:(Redirected) Alienware X51 R2 Wont Load after Computer Wipe

Best to post this in the Alienware Owners Club Forum, here:http://en.community.dell.com/owners-club/alienware/default.aspxBev.

1 more replies
Answer Match 73.08%

I am so frustrated! emachine only 10 mnths old. when starting gets to the welcome screen and reboots. have run all the scans and system restore - gives me an error System Restore ox8000ffff now it wont even start in safe mode! also had the error Startup Repair offline should I just shoot it!

A:Windows 7 wont start up, wont restore

Do you notice if the screen flashes a quick blue before it restarts?If it does, go back to the Safe Mode menu and select instead Disable automatic restart on system failure. The computer will try then to boot normally. If booting should fail and 'bluescreen', the PC will display it instead of rebooting. If possible, take a picture of it and insert it into your next reply. Otherwise, type in what it says.

8 more replies
Answer Match 72.66%

My Medion PC running Windows XP loads past the windows loading screen then simply goes black but the computer is still on and the screen is still active. My dual boot of Ubuntu works perfectly as does safe mode. Ive had this issue for a while but it used to turn on after i rebooted it but now it only turns on occasionally. Also I'm almost certain its got nothing to do with my hardware. Any help would be greatly appreciated.
 

A:My Computer wont load past the windows loading screen

6 more replies
Answer Match 72.66%

I have had this problem for 2 days now and it is only this computer it will not load certain websites also a game I play it will not load the game servers

Everything works fine on another computer had to test it but not this one

I did full CCleaner tested it again still same

Just did a full system restore still getting the issue

Reset the router and still same problems I have no idea at all in how to fix this
I run windows 7

Windows IP Configuration

Host Name . . . . . . . . . . . . : Robert-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : PK5001Z

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : PK5001Z
Description . . . . . . . . . . . : 802.11n Wireless LAN Card
Physical Address. . . . . . . . . : 1C-65-9D-8A-4D-E1
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::494d:e68e:d071:1f9d%13(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.104(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Friday, January 31, 2014 10:19:56 PM
Lease Expires . . . . . . . . . . : Saturday, February 01, 2014 10:19:56 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 ... Read more

A:Computer error wont load certain sites/game servers

Reading the reviews for the ZyXEL PK5001Z, I see endless problem reported though apparently updating the firmware can help. Amazon.com: Customer Reviews: CenturyLink ZyXEL PK5001z

Check under downloads button for the latest version> Check Firmware Version | PK5001Z | ZyXEL | Modems

1 more replies
Answer Match 71.82%

i really have no idea, i believe its a problem with the actual start up button instead of the computer itself, ive pried the thing open, seeing the generator is on, everythings in place and there are lights on, showing there is power. any ideas?
 

A:powers in, but start button wont start computer

Does it boot?
 

2 more replies
Answer Match 71.82%

I dont know alot about computers so please bare with me. I deleted alot of old programs (such as games etc) which I do not use anymore, *through the control panel add/remove programs*, then did a virus scan, and deleted what was found, and decided to go to www.microsoft.com and get the sp3.. after I installed, when I restarted my computer later, it gave me a black screen saying that it was shut down unexpectedly, and offers safe modes, last good config, and start normally, I have tried all three options, with safe mode, it freezes the computer, with the other two, it boots to the windows logo screen, then it will restart the entire system. Is there any way to fix this? I did not get windows disks or anything like that when I bought the computer, I did create recovery disks, but have since lost one of them, so they aren't much help.

Thanks

A:[SOLVED] computer wont load past windows logo screen

lickitysplit87,

It's going to be difficlt without the XP CD, as that has the Recovery Console that we need in order to get your computer past the logo screen and into the OS.

Have a read here. If you feel confident that you can get the ISO burnt to disk, come back and we'll continue.

http://forums.pcpitstop.com/index.php?showtopic=150212

3 more replies
Answer Match 71.82%

Hiya all,
My problem is that I rebooted my computer and it now wont start up. I did not change anything and the reason I rebooted was because of a network issue unrelated to the computer.

So here is some details.
gigabyte mobo (dual bios) ga81pe775 pro
4 x 512mb ddr400 ram
sata and ata hdds (4 in total)
pentium 4 3ghz processor
I removed all of the ram and inserted one stick in slot one to make sure it was not the issue.Retry loading and it does the same thing.

It loads up and freezes when it gets to the memory test. I tried each of the sticks of ram individually but no problem.All display the bios menu and then it stops.
Does anyone have any suggestions or solutions or theories of what might be happening?
Thanks for your time.
 

A:computer wont load operating system.Freezes at bios menu

13 more replies
Answer Match 71.4%

ok here is my problem. when i start up my computer i get to the windows starting up screen then all i see is a black screen and a mouse. I can move the mouse but thats all. the only way i can get the computer to start up is to restart it over and over until it finally will boot up. Thanks

A:Computer wont start up!!! help please!!!

did this just start happening after you added or removed any hardware or software??

11 more replies
Answer Match 71.4%

Not this computer, obviously. My mothers computer will not start past the second screen (saying Core-cell). Her computer runs on windows xp. This happened after I was removing files from the C drive, specifically multiple game files and placing them onto my flash drive. During this a pop-up came up with something about an important windows file being deleted, I was already finished so I cared too little about this ever so important message. I ignored it and continued to transfer the files onto my computer. Well needless to say, when my mom found her computer, it was already off, so when she attempted to start it it stopped after the second screen. I thought no big deal, ill just get out my handy windows xp- drivers and utilities (to repair it). And to my dismay nothing occurred. Nothing at all, restarted it multiple times (manually of course) with nothing but the same blue screen staring into the abysmal "Core-Cell." Not all is lost right? It is after all, just a repair disk! So I attempt to install vista, don't ask me why I thought a disk would work after the first one failed so miserably. Regardless, the same result. I attempted other things, furiously mashing the f8 key and for some apparent reason decided the f12 key had not been particularly good to me lately, so I mashed that too. With my limited knowledge, I even tried to enter the BIOS, knowing fully that if I managed to get into it, I would not know what to do from there. So all in all, I looked ... Read more

A:Computer wont start

.

2 more replies
Answer Match 71.4%

Recently, my brother got a new computer and put his old one in a closet for about a month, before he decided to give it to me. Unfortunately, this computer that was working perfectly fine when he set it aside now wont start. It turns on well enough, the fans come on and everything, and according to his description, because I don't actually get it until I drive up there tomorrow, fans come on, screen wont come on, drive sounds like it's trying to load something every twenty seconds or so, and the hard drive light doesn't turn on. Anyone have any idea what's happening?
 

A:Computer wont start

11 more replies
Answer Match 71.4%

When i press the power button, the CPU's LED does not light up and the system is not running.

What is the possible problem with the CPU??

A:Computer Wont Start Up!

It could be your actual power supply. Is the cable securely connected? How long have you had the computer for?

7 more replies
Answer Match 71.4%

hello.dont know what to do with it anymore.its start just when it wants.i think i have problems at cooler/socket from processor.when i push on it computer starts,if i realease it,it restarts and dont start anymore.can smdy have some ideea to help me ? i got a new cooler/socket but same thing.today i order a source maybe i dont have enough power and thas why doesnt start?

A:hi.Computer wont start

Its always a good idea to post all hardware specs, this way we have
a better understanding of your system. The specs also include the
power supply wattage and brand.

Did you install the cpu cooler as per instructions? Is the cooler the
push pin type? If so are you sure all of the pins are securely fastened?
Those push pins can be tricky. What I do is turn the pins until there
in the open position, then press each one in, working diagonally.
Push them in until you hear a click. Then turn it to the full close
postion..

1 more replies
Answer Match 71.4%

Just need some help and advice to anyone that may know what my problem is.

It started a while ago when my Graphics card used to "oxodise" when ever i moved my computer (to put a ipod cable in the usb port as an example) causing my screen not to pick up any signal from my Graphics card and I would have to rub the graphics card with a rubber this would usualy fix the problem.

well yesterday the same problem occured so I opened the box and took out the Graphics card rubbed it with the rubber and slotted it back in. I now try to turn on my computer and not only does the screen still not pick up any signals it is now beeping it starts with 1short beep then 1 long beep, reocurring. ive made sure that the graphics card was insterted properly.

if anyone could help I would very much appreciate it.

Ps sorry for any spelling mistakes using the smallest laptop knowen to man and pretty hard to type on it lol.
 

A:Computer wont start up

My first thought would be to try another video card.
 

1 more replies
Answer Match 71.4%

Hello,

I have recently bought a brand new computer for only 200 Bucks at Micro Center. I have only had for A week straight. I did not download any torrents music or nothing on it..

I went to turn my computer on. I have experienced a continuous restart when it attempts to load windows.

It take me to windows starting options.

Start windows normally
Start windows in safe mode
Start windows in safe mode network enabled
Start windows in safe mode command prompt enabled

I tried all four of them. And nothing happend. It will just continue to restart.

What do I need to do? Should I take my computer back to the store and refund my money? Or am I ****** out of $200??

Thanks for reading!

Josh

More replies
Answer Match 71.4%

Ok so my computer stopped loading my user profile so i had to log into safe mode to try to fix it, but ended up restarting my computer and now my OS wont start and all i can do is diagnostics, BIOS and boot devices, i have an option for recovery but it doesn't work, when i select system recovery the screen goes blank, and i left it for 3 hrs like that to no avail. I have an HP Pavilion dv11730- us and Vista SP2 Home Premium.
Thanks in advance

A:Computer os wont start

Hi -

You need to boot up the system with your HP Vista recovery DVD. If you did not burn one, you can obtain replacements from HP for about $30 -

http://h10025.www1.hp.com/ewfrf/wc/d...0810334&dlc=en

Regards. . .

jcgriff2

.

4 more replies
Answer Match 71.4%

--------------------------------------------------------------------------------

Hi everyone and thank you for taking the time to read my problem.Last night i was playing chronicles of riddick and after i finished the game the computer shutted down.I was not able to power it up since then,when i press the power button nothing happens i hear no fans,no beeps no nothing.I think that the problem might be caused by my power supply,i know i have power since the red light on my remote control is on(the remote is plugged in my usb),but not enough to power my computer.Any help will be greatly appreciated.Thanks in advance.

My system specs
Intel pentium 3.00 Hyper Threading
80 gigs
516 ddr
All in wonder 9800 pro 128 ram
 

A:Computer wont start!!!!!

Hi and welcome. Unplug any external devices besides the keyboard, mouse and monitor, and try to restart.

If that doesn't work, you might try another power supply.
 

1 more replies
Answer Match 71.4%

When I started my computer up it started running Windows Repair and it took a really long time so I just rebooted again and started windows normally. Can someone check out this HiJack This Log and tell me if something looks wrong...

Logfile of Trend Micro HijackThis v2.0.0 (BETA)
Scan saved at 4:18:24 PM, on 3/26/2007
Platform: Windows Vista (WinNT 6.00.1904)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\system32\taskeng.exe
C:\Windows\Explorer.EXE
C:\Program Files\Windows Defender\MSASCui.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Windows\System32\igfxtray.exe
C:\Windows\System32\hkcmd.exe
C:\Windows\System32\igfxpers.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\HP\QuickPlay\QPService.exe
C:\Program Files\HP\HP Software Update\hpwuSchd2.exe
C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exe
C:\Program Files\Hewlett-Packard\HP Wireless Assistant\WiFiMsg.exe
C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe
C:\Program Files\Java\jre1.6.0\bin\jusched.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\AIM6\aim6.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Program Files\HP Connections\6811507\Program\HP Connections.exe
C:\Program Files\Microsoft Office\Office12\ONENOTEM.EXE
C:\PROGRA~1\HEWLET~1\Shared\HPQTOA~1.EXE
C:\Program Files\AIM6\aolsoftware.exe
C:\Program Files\Internet Explorer\ieuser.exe
C:\Program Fil... Read more

A:Computer Wont Start Up Normally

Howdy,

You have used a Beta version of HJT please delete it and use the one below

Download HijackThis to your desktop

Right click & Extract Files
Open the file and click on the Hijack.exe
It will open and use the default path
Check do you wish an Icon
Click on Icon and choose "scan system and save a logfile" usually in notepad
Copy and Paste the logfile in your next post
Using Ctrl+A to copy All and Ctrl+C to copy and Ctrl+V to paste.

 

1 more replies
Answer Match 71.4%

Hi,

When I put my computer on a black screen comes up saying windows has no successfully done something .... ect I get things to do like. Start windows normal, safe mode, with network, with command prompt, start windows last working point ect ... Whenever I select one of them it restarts flashes a very quick blue screen of death and restarts to return to the screen so i'm stuck in a circle.

I tried hitting R to repair to OS when I put the disc in and it was examining the HDD for about 4 minuites is that to long? I restarted it ... because I wasnt to sure if that is how long it takes and I was worried about loosing data. Sorry for the really bad explaination, any ideas?
 

A:Computer wont start up

http://www.techspot.com/vb/topic8356.html

If you don't know what you are doing do some research FIRST!
 

5 more replies