Tech Problem Aggregator

HDMI monitor no speakers-no sound from anywhere when connected?

Q: HDMI monitor no speakers-no sound from anywhere when connected?

I have the same issue in windows 10 home 64 bit-
HDMI monitor no speakers-no sound from anywhere when connected?



When I right click on the volume control, the options it shows are:
open volume control
playback devices
recording devices
sounds
volume control options

It does not give me a properties option.

Then I went to control panel and searched for sound. Then I saw the screen below. There was a Digital Audio as well and I clicked 'Don't use this device(disable)' on it by mistake and clicked OK.



Now, I only have Speakers option. How do I get the Digital Audio option back in here? I think that will solve my original problem.

Thanks

More replies
Answer Match 81.6%

I have an external monitor with no speakers I use as a dual display along with my laptop monitor. No sound comes out of my laptop speakers nor when I hook up external speakers to it while I have the external monitor hooked up by the HDMI cable. Is there anything I can do to get this to work?
Thanks,
Bill

A:HDMI monitor no speakers-no sound from anywhere when connected?

Right click on the volume control and then Properties,

When you connect the HDMI it becomes the default output device, even though it has no speakers.

You need to change this back to "Speakers" and set as default.

5 more replies
Answer Match 95.34%

Hi,

I've recently purchased a Samsung T23A750 monitor and to my disappointment when I try to watch a movie the built in speakers are not functioning. I have a Sony Vaio Z216GX connected via HDMI to the monitor (HDMI-DVI) port. I can definitely see the video, but no audio is playing from the speakers. The built in speakers are not at fault- I did a self-diagnosis of the monitor and the speakers seem to work fine. I also set the monitor as the default for the audio and even when Win 7 says its functioning properly, the speakers still don't work. Conversely, setting the default to my PC speakers work fine. I'm sure its not the HDMI cable- I used the same one to hook my pc to my tv with everything working fine. Any ideas??

A:Monitor Speakers not working when connected via HDMI to laptop

make sure you have the latest drivers for the hdmi can check by going to the windows start bar and right clicking on computer and choosing manage then click device manger and open the tab were it says sound,video and game controllers if you see somthing related to hdmi and has a yellow triangle then right click on it and update software if no yellow triangle is there try it anyways if that doesn't help then post here again, hopefully someone who knows more about hdmi can help also because i never had hdmi but ive had audio problems with my speakers before and this is how ive fixed it before

2 more replies
Answer Match 93.66%

Hi

I have connect my laptop using an HDMI cable to my TV. And from my tv I have connected my two HiFi speakers. When the TV is on an AV channel I have sound coming from the TV and HiFi speakers but when I switch it to the HDMI source channel, sound only comes from the TV and not HiFi speakers.

This is frustrating because I want to watch movies on my TV through my laptop and get the feel of some surround sound through the HiFi speakers but it is not working!!!!

Please Help!

Thanks

A:No sound to HiFi speakers when HDMI Cable Connected

The problem is not your PC but your TV and how it handles HDMI audio. There is nothing we can do for this, it is strictly an issue with your TV and how it routes audio internally (or to external devices).

2 more replies
Answer Match 93.66%

I just installed a gigabyte hd4350 in my hp a1520n desktop bc it has an hdmi output. picture looks good, sound works, however when the hdmi cable is connected to the my samsung lcd tv, i get no sound through my computer speakers even when im not using the tv as a monitor or when the tv is turned off. i get sound through the tv though. when i unplug the hdmi cable from the tv, i get sound on the computer.

is there a fix for this? i have onboard sound enabled in the bios.

i have windows xp 32bit. in the sound and audio device properties, under the audio tab, default device, i see both realtek hd audio output and ati hd audio rear ouput when the hdmi cable is connected. when its not connected, just realtek hd audio is available.

i know i cannot have sound coming through the tv and computer speakers at the same time. is it possible for the sound to be switched back to the computer speakers when the tv is off WITHOUT having to unplug the hdmi cable that goes to the tv?
 

A:no sound through computer speakers when hdmi cable connected to tv

Weeell. Have you even tried setting the "Default audio playback device" (or whatever, in control panel->sounds->defaults tab to Realtek HD audio when the cable is plugged?
 

3 more replies
Answer Match 90.3%

Hello guys, I bought a new monitor from LG and connected it via HDMI to my laptop but the sound does not work on the speakers of my monitor could you help me please???

A:No Sound via HDMI on monitor speakers??!!!!?!!

Set it as Default Device, and Disable the Intel device. Then restart.

5 more replies
Answer Match 89.46%

I get no sound when I connect my hdmi monitor my laptop

My monitor has no sound

How do I keep the sound on my laptop?

Thanks
OM
 

A:No sound when hdmi monitor connected

Try clicking the speaker icon in the lower right corner of your monitor, click playback devices, your monitor should be listed there and you need to set it as default.
 

3 more replies
Answer Match 89.46%

Problem: AMD HDMI output would not play sound via HDMI cable to monitor speakers.

Testing the AMD HDMI sound output gave the following error message:

Device in use by another application?

This FIX worked for this hardware configuration.

? MSI motherboard
? Realtek Audio onboard (built into motherboard)
? AMD Video board installed withHDMI cable to monitor
? See how the Device Manager sound devices should look when correctly configured below.

Issue(s):

1. The Realtek HDMI Drivers had been assigned to the AMD HDMI card under Device Manager, Sound, Video and Game Controllers.

2. There are multiple hardware devices/drivers that are conflicting.

Actions Required:

1. There are 2 instances of the AMD HDMI card that should be shown under Device Manager.

2. You must uninstall the Realtek hardware and drivers so that only the AMD HDMI device is showing.

3. The AMD HDMI and Microsoft device drivers must be assigned to the AMD hardware.

How to fix:
1. Under the Device Manager sub-heading ?Audio inputs and outputs?
? AMD HDMI Output (High definition Audio device)
? Right click and select Properties, Driver, should show driver provided by: Microsoft

2. Under the heading ?Sound, Video and Game Controllers?
? AMD High definition audio device
? Right click on the device to display the menu window
? Select Properties, Driver tab
? Driver Provider should say: Advanced Micro Devices
If t... Read more

A:FIX - AMD HDMI no sound output to monitor speakers

Originally Posted by laserlight


Problem: AMD HDMI output would not play sound via HDMI cable to monitor speakers.

Testing the AMD HDMI sound output gave the following error message:

Device in use by another application?

This FIX worked for this hardware configuration.

? MSI motherboard
? Realtek Audio onboard (built into motherboard)
? AMD Video board installed withHDMI cable to monitor
? See how the Device Manager sound devices should look when correctly configured below.

Issue(s):

1. The Realtek HDMI Drivers had been assigned to the AMD HDMI card under Device Manager, Sound, Video and Game Controllers.

2. There are multiple hardware devices/drivers that are conflicting.

Actions Required:

1. There are 2 instances of the AMD HDMI card that should be shown under Device Manager.

2. You must uninstall the Realtek hardware and drivers so that only the AMD HDMI device is showing.

3. The AMD HDMI and Microsoft device drivers must be assigned to the AMD hardware.

How to fix:
1. Under the Device Manager sub-heading ?Audio inputs and outputs?
? AMD HDMI Output (High definition Audio device)
? Right click and select Properties, Driver, should show driver provided by: Microsoft

2. Under the heading ?Sound, Video and Game Controllers?
? AMD High definition audio device
? Right click on the device to display the menu window
? Select Properties, Driver tab
? Driver Provider should say: Advanced Micro Devices
If the driver provider is wrong you will need to... Read more

2 more replies
Answer Match 88.62%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, Intel64 Family 6 Model 23 Stepping 7
Processor Count: 4
RAM: 8191 Mb
Graphics Card: Windows Live Display Driver, 4 Mb
Hard Drives: C: Total - 953866 MB, Free - 649070 MB; I: Total - 476936 MB, Free - 358954 MB;
Motherboard: Gateway, FMCP7AM
Antivirus: AVG Anti-Virus Free Edition 2012, Updated and Enabled
 

A:no sound from hp monitor w/speakers & HDMI, model w2207h

Here, give this a look. Troubleshooting Sound Problems with Monitor Speakers
 

1 more replies
Answer Match 72.66%

So I've got a problem,I changed my case 2 days ago and everything went great,all working as it should be.Up until an hour ago,when the lid got stuck in one of the little clips so after a quick bang it went in.But then I lost my picture on both monitors.
So I went to investigate,I ended up moving the GPU over to the other 16x slot and it is now fine.
but since then I've lost all sound through either the front or rear jacks,It is saying that the speakers are not connected.I've done all the usual checks,as in default devises,drivers.Everything I can think of I have done.I have tried a new cable,and tested through both of my phones and the speakers work fine.I've also tried a few sets of headphones in both jacks.There is a faint hiss sound when I turn the speakers on,that has just started.
I have managed to get sound through my tv via HDMI,but every time,I go into audio manager and lets say change from soft to hard,I loose the sound again,and have to set the HDMI as default again.this too has just started.
I'm using the on board realtek audio sound card ,on an Asus p8z77-lx motherboard.
Just a quick note when I plug in the jack,there is no beep and the pop up screen does not appear as normal.
To me it is pointing towards a motherboard problem,with the 2 problems happening together.Any help would be great.

A:No sound through speakers.Jack not being detected.HDMI sound only?

Hiyya Paul mate sounds like (no pun intended) that thump dislodged something on the board just carefully move the I/O output block and see if there is any movement, could be something a simple as dry joint but which is going to be hard to find and fix.

If you have some warranty and I know it is a PITA having to reef it all out again but.....

Personally I have the P8Z77-V and I just stuck an Asus Xonar DG card in the thing and there is no comparison really and you get one heck of a control centre. Not expensive I don't know about where you are but out here $35 so both my Ivy and Sandy Bridges have them.

8 more replies
Answer Match 72.66%

Yesterday I installed a new external hard drive - following the installation - my sound no longer played through my television (video is fine, HDMI connection) and sound now comes ONLY through the laptop speakers.

The option for HDMI Audio doesn't appear in the 'sound' menus. I have 'checked' "shoe disabled" and "show disconnected" in those menus.
Basic Specs:

DV7-4060us

Windows 7/64bit

IDT High Definition Audio Codec

ATI Mobility Radeon HD 4250
AMD M880G with ATI Mobility Radeon 4250

I have tried the following fixes gleaned from other forum posts on similar forum posts:

Uninstalling and reinstalling IDT drivers - didn't work.

HP driver 'recovery manager' to install 'original' IDT audio codecs - didn't work.

Unistalled ATI Video Drivers , and reinstalled them - didn't work

System Restore to a week ago - didn't work.

I use my HD TV as my primary monitor for gaming, so having sound through laptop speakers and not TV is quite annoying.

Perhaps my only solution is another sound card?

A:no sound through tv via hdmi, sound plays through laptop speakers (idt

So you're trying to get audio to play on your TV from your laptop? Since you said the video is fine it's obviously not the video drivers. It sounds like the sound output is configured wrong. I don't think it would be labeled as HDMI. HDMI is just DVI with HD Audio. Try altering your sound settings to see what you can get.

Audio is a very difficult thing to diagnose and fix.

6 more replies
Answer Match 72.24%

I purchased a new monitor and it looks great but I can't get the built-in speakers to function. The monitor has inputs for VGA, DVI, and HDMI and I currently have it connected to my video card via HDMI. The front panel audio jack is functioning and I am able to hear audio if I plug headphones in but unfortunately I don't have any external speakers. From the sound menu I have three playback options: Speakers, Realtek Digital Output, and my monitor. I would like to sort this problem out quickly so I can play some games without using earbuds.

A:No audio through monitor speakers via HDMI

Welcome splooge

Does the Monitor have any standard speaker jacks (for input) ?

9 more replies
Answer Match 72.24%

My friend connected an external monitor to his Sony laptop using an HDMI cable. The problem is that there is no audio from the external monitor speakers. The sound still comes out of the laptop speakers. When I look in Playback Devices, I see what appears to be the speakers as a device (can't remember exactly what is was called, but it was a somewhat vague name like "audio device"), and I've tried various settings, yet I can't get sound from the speakers.

So my question is, does an HDMI connection on a monitor support audio, or does he need to get a audio cable and use the green audio jack that is on the monitor, which I thought was just needed with the VGA connector.

Thanks

A:No audio to HDMI monitor speakers

It depends on what is available on the specific PC. Normally, both Video and Audio are on the HDMI port, and when a cable is connected to the HDMI port Windows automatically changes the default audio playback device from the "Speakers" (The PC's sound card) to the HDMI as the default audio playback device.

Since this is not happening, either the incorrect video driver (which includes HDMI audio) is not installed or the PC does not have the capability.

About all I can offer without the specific Sony PC Model Number so we can research what it has.

4 more replies
Answer Match 71.4%

Nothing is showing up on the TV. I selected the Extended screen option & nothing. I looked in Display Settings & no second screen is being detected. Even though on the TV itself. It reads that a HDMI is connected to the specific HDMI port. Windows 10 says my Drivers are all updated & my Displey Driver is AMD Radeon R7 200 Series

A:HDMI connected to Monitor & the other end connted to TV

If the title of your post is accurate.....then that will never work. You have to connect the TV to the PC with an HDMI cable and then do the same thing for the monitor. You need 2 cables. No other way around it.

3 more replies
Answer Match 70.98%

Hi guys!

I've been struggling with this problem since I got my computer, a little over a year ago.

I've tried everything, but can't figure out how to get sounds from my pc speakers and HDMI at the same time. It's really annoying having to change the primary output multiple times a day (I watch a lot of movies using HDMI-cable to my tv). Might sound like a little problem to you, but I'm becoming obsessed with this

My soundcard is some kind of a Realtek HD -thingy, if that helps.

Any advice would be appreciated

A:Sound from HDMI and pc speakers at the same time

That is the way it works. You can only have one "default playback device" - either your Speakers (PC sound) or the HDMI.

I've seen other posts about this, but don't recall seeing any way around this.

4 more replies
Answer Match 70.56%

Hello, I built my new computer about a week ago and was running it off a single 19" Tevion TV while I waited for the HDMI cables to arrive so I could setup my second monitor.

They arrived yesterday and when I plugged in my 32" JVC LT-32DA30J there was overscanning and the bluriness. I fixed the overscanning in the TV's menu and now the size is correct but even at native resolution, the JVC monitor is still quite blurry and is a strain to look at and concentrate on.

Plugging the HDMI cable into my Tevion monitor made that go blurry as well so it could be the HDMI cable or the motherboard ports (when I first got the PC, the VGA port had the same problem but once updated it looked normal)

Does anyone know of a fix to this ? Or can at least suggest what part is going wrong so I can try and fix it ?

What I have tried:
Changing the resolution - all the different resolutions all show the same blurriness
Changing the refresh rate - problem persists through all refresh rates
Changing monitor settings - As above, changing these settings didn't help with anything

Any help is very appreciated , I've been trying to fix this problem for most of yesterday

A:HDMI connected monitor is blurry and seems out of focus

you dont seem to have changed the 2 most important things!!

1) update the display/gpu drivers.
2) change the hdmi cable.

if neither results in it working then report back!

9 more replies
Answer Match 70.56%

Hello, I am weighing up my options between purchasing an Ideapad 500s or a Thinkpad L460. I do a bit of video editing, and when I'm doing that kind of work I want to hook the laptop up to a 4k screen, (the extra pixels allow a much more efficient workflow). To connect to a 4k monitor at 60Hz I have read that I need a DisplayPort output (which I note that the 500s does not have), or an HDMI 2.0. I suspect that the Ideapad 500s does not have an HDMI 2.0 output, but I would be happy to be contradicted. Could someone please confirm this one way or ther other? Preferably if you could point me to some official documentation about the product which answers the question that would be great! If it does have an HDMI 2.0, I wonder if anyone has any idea how the nVidia chip would handle the 4k screen. I wouldn't be gaming or even doing and 3d modelling or rendering - just some HD video editing - so I expect it would be fine? Many thanks,Tom

More replies
Answer Match 70.56%

Hi! I have this monitor http://www.newegg.com/Product/Product.aspx?Item=N82E16824014146

and this cable

http://www.newegg.com/Product/Product.aspx?Item=N82E16812226013

Connected to a normal TV and HDMI to DVI cable to my lcd monitor at the same time it gave me an option at startup to switch to my HDMI source, but when I did all I saw was black on the LCD screen.

I was able to go into Display settings and switch it to HDMI manually but when it swaps to my lcd monitor its nothing but black again!

Do HDMI to DVI cables work for PS3s? My lcd monitor does not have a HDMI plug in. Only VGA and DVI

I'm hoping theres a trick to get this working or at the very least an adapter that wouldn't degrade the quality as much.
 

A:Playstation 3 and HDMI to DVI Cable connected to LCD Monitor

oh nvm my monitor dosent support high def outputs =\
 

2 more replies
Answer Match 70.14%

I'm having some trouble with my laptop's sound. Every few minutes, it sounds like the audio skips and buzzes for less than a second. It sounds like interference or something. I was certain it was a fault with the speakers, but the problem exists when listening on headphones and even on the TV connected through HDMI. Also, it happens in Windows Media Player, Adobe Flash, or anything that has audio. Is there a way to fix this? Thanks.

A:Sound Buzzing in Speakers/Headphones/HDMI

I'm still not having any luck. After doing some tests, I determined that the mouse and keyboard are affected too. Every 30 seconds, on the second, everything stutters for less than a second. In addition to the audio problems described, the keyboard stops taking input and the mouse automatically clicks a link if the cursor is hovered over it. Any ideas on what's going on?

2 more replies
Answer Match 70.14%

Hi, I was wondering if someone can help me. I updated to windows 10 some months ago and realized my beats audio panel was gone. I few day back I re installed the High Definition Audio Device drivers and beats audio seems to came back. I recently bought a denon amplifier and noticed very low sound when I connect the notebook to the amplifier through hdmi.Is the hdmi sending the wrong signal? are there any new drivers for hdmi controllers or realtek sound card? Thanks a lot in advance!!!

More replies
Answer Match 70.14%

Hi, I was wondering if someone can help me.

I updated to windows 10 some months ago and realized my beats audio panel was gone. I few day back I re installed the High Definition Audio Device drivers and beats audio seems to came back.

I recently bought a denon amplifier and noticed very low sound when I connect the notebook to the amplifier through hdmi.
Is the hdmi sending the wrong signal? are there any new drivers for hdmi controllers or realtek sound card?
My laptop is a HP envy 17 j011nr (i think so) core i5 beats audio
Thanks a lot in advance!!!

A:Low sound when connected to amplifier through hdmi

Realtek shouldn't even be involved with the HDMI sound. I suggest to update your laptop's drivers and use "Intel Display Audio" as your HDMI driver. Set the volume to max then you're good to go.

2 more replies
Answer Match 70.14%

Hi.  Last week and prior mths HDMI connection worked, TV had sound.  This weekend, 8-20-16, TV sound went away but still had video.  Looked at forums, utube and did the control panel sound device manager.  the Digital Display Audio-AMD High Definition Audio Device; not plugged in is grayed out.  clicked on it to no avail.  the set default is also grayed out so i cant even set a default.  PC speakers do work.  bought a new HDMI cable but no change.  all the drivers are up to date.  not really sure what happened.  worked for months and now no sound.  any idea????

More replies
Answer Match 70.14%

Decided to run this old laptop to my TV so that I could watch shows from online. When I connected using an HDMI cable the sound cuts in and out very bad. Thought the cable might be bad so I switched it out for a new high dollar cable but still has the same problem. Issue occurs both streaming and when testing using system sounds (such as "test" in the sound setup in device manager). Running Windows 10 (64-bit) and have installed all system updates and have tried updating the audio driver but it is saying I have the most up to date driver. Any help would be greatly appreciated.

More replies
Answer Match 70.14%

Hi folks, so I got a new pc and connected it to my LG 42LV550T using a DVI to HDMI and 3.5mm from line out (and tried headphone socket) to the 3.5mm audio in (RGB/DVI) socket on the TV but I don't get any sound on the TV.
I connected the PC to my stereo using the line out and headphones socket with 3.5mm to stereo/phono plugs and I get sound, but I would like the sound through the TV and then the TV connected to my stereo for better sound all round.

I know DVI doesn't carry sound.

I had a chat on LG support with no help

Any ideas ?

PC specs.
OS Version: Microsoft Windows 8, 64 bit
Processor: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 8082 Mb
Graphics Card: Intel(R) HD Graphics, -1984 Mb
Hard Drives: C: Total - 953516 MB, Free - 897064 MB;
Motherboard: Gigabyte Technology Co., Ltd., H61MA-D3V
Antivirus: Windows Defender, Disabled

Thanks TechnicalH1
 

A:DVI to HDMI and 3.5mm audio connected but no sound

16 more replies
Answer Match 70.14%

Hello, I just bought an HDMI cable to connect from my HP Pavilion x360 onto my TV. Unfortunately, I only get video on my TV but no audio. The audio only comes from my Pavilion x360. I am aware of right clicking the volume icon and clicking on "playback devices" to set defult the HDMI cable or TV. Unfortunaly, this is not visible even after enabling the disconnected and disabled devices. Please, anyone help so I can get the audio on my TV as well? I've let a screenshot. As a reminder, my HDMI is connected on both sides, and I have both disconnected and disabled devices visible. Thank you!

More replies
Answer Match 70.14%

Hi everyone, I just got a new sound bar (Yamaha YAS-105) which only supports Dolby Digital 5.1 (AC3, I think) and I want it to smoothly transcode all of my DTS or newer audio to a multi stream AC3 in both MPC player from the latest K-lite mega pack, VLC and Winamp, or rather, if possible, just in general. If I play something thats DD5.1 in K-Lite's MPC it neatly picks up the audio and displays it as DD on my sound bar, same thing goes for DD5.1 in VLC etc. but as soon as I play something in DTS or higher there is no audio. I've been googling and tweaking the settings already and after messing around a bit it does play sound through MPC but none of my Dolby lights light up on my device and it doesn't sound like 5.1 either, the weird thing is that no lights go on, not even the PCM light just the TV light is connected and it gives a sort of stereo with subwoover sound (so 2.1). If anyone can help me out I'd be very grateful, I know it's possible because it works with media boxes as well, I just can't get it to work on windows... Any extra info, I have an Alienware X51 RC1, Soundbar is a Yamaha YAS-105, like I said it's hooked up via HDMI to my TV and my TV through a Digital optical cable to my soundbar.

More replies
Answer Match 70.14%

Using ACER K272HUL 31 inch monitor, connected via HDMI to my Y700-15ISK Laptop (ideapad). I am still in warranty according to my support account. (I did however swap out the default hard drive for another one purchased elsewhere) Here's what is happening: certain parts of the monitor with motion will remain colored while static parts will gray out. Here's a reddit thread I submitted to /r/techsupport. In hopes of utilizing two communities. So far, Bad HDMI port seems to be highest contender. I had a Y50-70 before this Y700 whose HDMI port was rather poor in quality; did not seat well, breathing on it wrong disconnected from monitor. It would not surprise me if that is the root problem.

More replies
Answer Match 70.14%

Hey guys.. so I connected my other SA350 monitor from my other broken computer to my main one, and it shows a black screen. They're the same monitors, and the power to both are on. I'm on Extended, the other monitor's input is HDMI and the output port on the computer is DVI (Amazon Basics). Main monitor is VGA to VGA. What should I do? Updated system specs for your convenience.

A:Second monitor connected by HDMI to DVI shows black screen

Solved. Sorry, it seems the monitor is just Pfftt. It's dead, and it's going to the Samsung Service Center ASAP.

1 more replies
Answer Match 69.3%

I've pluged a HDMI cable from my laptop into my TV and theres no sound coming from the TV just the laptop speakers. I've tried going into my control -> sound options -> playback -> and setting the HDMI output to default but still no luck, whats listed is :

Speakers
Realtek Digital Output (Optical)
Realtek HDMI Output
Digital Output device (HDMI)

and next to each one listed is like a sound meter, the only one thats active is the speakers at the top which im guessing is the laptop speakers.
 

A:No sound output from HDMI cable in my tv, only laptop speakers

6 more replies
Answer Match 69.3%

Hi everyone,

Here is the issue I'm having. I have an Asus K61-IC dual booting Windows 7 Professional x64 (default) & Fedora 16 x64. In Windows, whenever I plug in a HDMI cable to watch a movie on my LCD TV audio will only come out of laptop speakers and when I open audio properties it says HDMI audio not connected or something to that effect (at the moment, I'm not able to connect it to the TV) and it will not let me click on properties, but when I open the driver properties, it tells me everything is working fine. I cannot figure this out for s#%t. Thanks for any help that yall can provide.

Thank You,
C. Davis 504

A:Asus K61-IC Sound coming from speakers when HDMI is plugged in

The problem is usually with the video as it controls the HDMI audio. If its not detecting or properly detecting the HDMI cable connection then you can have the problem you have.

Reinstall the Video drivers (or install the latest driver for the video) and see if that helps.

2 more replies
Answer Match 69.3%

I've just received my Laptop back from repair and all seems to be well, I had my screen panel replaced, gpu replaced(from 570m to 670m), new hard drive and CPU fan. However the problem I seem to be having is that internal speakers are completely not working.

I can see that bolume bar in for my internal speakers is actually changing but there is no sound. My system is not muted (unless there's some secret button I'm missing out on) No matter what i try it seems that sound will not work through my internal speakers, I've plugged in my Razer headset(Kraken) that works with my other computer but is not even detected when plugged in the Audio jacks of my laptop(Doesnt even pick up the microphone) and this did work before I sent it out for repair. Sound only works through HDMI output into a TV/Monitor.

Now I'm not sure if this some software configuration that I have to do or something physical with the hardware but I would prefer to not have to send it back as it would take a month to get back to me and also the repair company states that if the problem is due to software then they will charge.

I assume it's a conflict that Realtek HD audio manager is having or something but none of my devices show up on the RealtekHD Audio Manager nor do I get a pop up when a device is detected(which is what normally would of happened)

System:
MSI GT780DX
I5 2430
GTX 670m
Win 7 64 bit
8gb Ram

Edit: After some more looking around, I really do believe that what I had thought earlier was causi... Read more

A:Sound works through HDMI output but not internal speakers.

What is set as default in the Output Devices?

Right click the volume control, select output devices, set realtek audio (or speakers) as default.

Repeat for input devices to get the mic working

9 more replies
Answer Match 69.3%

I have connected my HP Laptop with Windows 8 to my TV through an HDMI port. I watch netflix and youtube. A couple times a day the sound will just quit working. I check the audio and it says it is still hooked up to the TV. The only way I can figure out how to get it working again is to restart the computer. This has never happened while audio was playing, just when it is not in use for a little while.

Any help would be appreciated.

Thanks!

Luke
 

A:Laptop connected to TV through HDMI Sound turns off every now and then

HP has tens of thousands of different laptops. Which exact one do you have? The full model number will be on a sticker on the bottom and will be similar to DV9240ca or DV6-2130us.
 

3 more replies
Answer Match 69.3%

www.sevenforums.com/sound-audio/228558-hdmi-sound-output-problems-2.html

Dear Experts

I am using windows 7 64 bit on my desktop (motherboard ASUS P5E)
ASUS - Motherboards- ASUS P5E

And I installed VGA SAPPHIRE HD 3870 (ATI RADEON Technology) 512 MB.
This VGA has a converter plug from DVI to HDMI.

Connected a 3 m HDMI cable from a converter to the Samsung TV.

I can see a picture on the TV but no sound

What I did for troubleshooting

1- download latest driver from AMD website from the link below :
AMD Catalyst
2- Follow the instructions here :
How to Set Up Audio on an ATI Radeon HD | eHow.com

No audio from HDTV when playing audio / video from a computer system

3- Digital Audio (HDMI) option was grayed out (not clickable) as can be seen in the snapshot below :

http://i46.tinypic.com/2d10aba.jpg

A:SAPPHIRE HD 3879 connected to TV via HDMI no sound

What is a Sapphire HD 3879? I can't find that model. I see a Sapphire HD 3870, is that what you mean?

Regardless, you aren't getting audio because DVI doesn't carry audio, so converting from DVI to HDMI won't give you audio.

8 more replies
Answer Match 69.3%

As the title says, I've tried connecting my TV to my computer with an HDMI cable, and the video part works, but no sound plays. When I checked the list of playback devices, the TV appeared (as shown below), but it apparently cannot play sound.

I don't think I know anything beyond what I've posted, but if anyone could help me out with this, I would appreciate it.

Also, as a side note - I am completely unable to interact with any of these objects - I cannot set something as a default device; there is no response when I do it, and disabling the audio device only works until current sources of sound (like videos) are restarted.

A:LG TV not playing sound when connected via HDMI cable

If you highlight the LG TV you should​ be able to set it as default. If not, it sounds lik a permission issue (like non-admin account).

2 more replies
Answer Match 69.3%

I used to be able to connect my r11 to the TV and get sound.  For some reason, this has now stopped.  I have been through all the forums and tried various options to no avail. All help gratefully received.

More replies
Answer Match 69.3%

I have been using an HP Z display as an ext monitor, connected to my Pavilion 15 notebook using the hdmi port.  Following an update 2 days ago, the monitor no longer receives a signal from the hdmi port.  (I know the monitor and cable are ok as they work on another laptop). Any help or suggestions how to resolve this issue will be great!

More replies
Answer Match 68.88%

HP Pro Book 450 G2Windows 7 Professional 64 bitIntel i7 5500U 2.4 GHz8 GB RAM Issue:  no sound from the built in speakers or when connected to external speakers from 3.5 mm stereo output jack.  I have tried several audio sources ? Windows Media Player, VLC, WInamp, Youtube, etc.  All volume levels at max and nothing is muted.  The level meter indicates that sound is being produced, but there is no sound emanating from the speakers. This issue started just a few days ago, and until then I had sound. I have tried: Control Panel > Hardware and Sound > Manage Audio Devices > (right click)Configure Speakers > TestTest (level meter indicates sound)Disabling/ re-enable> Properties > Advanced > Test> Sounds Tab > (Asterisk) > TestDevice Manager (General Tab > Device Status: ?This device is working properly.?)Disabling/ re-enableUpdating the driverRolling back the driverWindows Fixit utility ? ?Did not detect any problems??System Restore (error ? did not complete properly for some reason)

A:no sound from the built in speakers or when connected to ext...

Hello William-0 Welcome at the HP forums. Maybe windows 7 updated the audio driver and something went wrong. You might want to try to reinstall the driver: (It's also the fastest way to reset everything to default) http://ftp.hp.com/pub/softpaq/sp69501-70000/sp69844.exe Just let me know if it works. Winos




The doors of wisdom are never shut. Benjamin Franklin&We must use time wisely and forever realize that the time is always ripe to do right. Nelson Mandela

1 more replies
Answer Match 68.46%

firstly this is my first post so sorry if i sound noob.

ok so i installed windows 8 consumer preview build 8250 x64 last night. everything seems to be working correctly other than my sound. i am using VT1708s by via embedded in a asus m5a78l-m/USB3 motherboard now the problem is the sound is working fine via my HDMI connection but via the 3.5 mm jack the sound is all strange and un-usable its like according to my friend it sounded like it thought it was digital when it is analogue.

i have tried installed the windows 7 x64 driver from both asus and VIA but it didnt work still the same problem. i had to run it in compatibility mode.

please help me fix this thanks

A:VIA Vinyl VT1708s + 3.5mm Speakers Strange Sound (only HDMI works)

I'm in the same boat with my board....only difference is my sound works with the windows built in driver but I can't get the VIA driver to load at all.

10 more replies
Answer Match 68.04%

My speakers are no longer recognized by my computer. Sounds and audio devices says No audio device. Cant change device volume or speaker volume because It acts as if I have no speakers connected. the audio tab says no playback devices. they are all greyed out. I have never disconnected speakers and am sure they're plugged in correctly.

I had a virus that changed a lot of settings. It managed to disable system restore task manager internet connections and last but not least sound lol.
Not funny but somehow i overcame all those problems but im left with 1. I have run full scans with mcafee superantispyware hijackthis combofix etc.
Im sure most harmful threats are gone.

Please help by giving me simple and specific step by step methods of fixing this problem i am in desperate need of help because i just started school and this is all i have.

system details:
windows xp professional 2002, service pack 3
AMD sempron processor(tm) 3000+ 1.80 ghz, 992 MB of RAM
 

A:Solved: Speakers connected properly but No Sound!

16 more replies
Answer Match 68.04%

I have an HP Pavillion DV2-1209AV Windows 7. I just purchased speakers for my laptop. Logitechspeakers, but they are buzzing but not producing sound from my computer. What do I do to make them function properly?

A:I just connected Logitech speakers to my laptop but no sound...

Hi, Please try this first: Right click the speaker icon,Select Playback devicesRight click then Enable the external devices      Hope this helps:

9 more replies
Answer Match 68.04%

Previously, we could get the sound to work on our Bose speakers for our computer but no sound would come from the TV when we connected it to the PC with and HDMI cable. But now overnight, it's swapped; we can now get sound on the TV when we're using the HDMI cable but no sound is coming through on the speakers when we just want to watch/listen to thing on the PC. 
 
Any ideas are suggestions are REALLY appreciated.
Thanks in advance!! 
Pocsine

More replies
Answer Match 67.62%

Hi.

I don't know if Im posting this issue in the right forum.. My problem is that when I connect my earphones in the earphones hole on my sony vaio laptop, I do hear the sound through the earphones, but it also comes from the laptop's inbuilt speakers.

When I right-click on the speaker icon in the system tray, and then go to playback devices, all I find is speaker/HP (Realtek High Definition Audio).

Don't know what's wrong. Please help!

A:Headphones connected but sound coming from laptop's speakers.

Hi do you have this in control panel Windows 7 / Realtek HD Audio Manager: How to Set Up 5.1 Sound to The Best Parameters - YouTube

19 more replies
Answer Match 66.36%

Hi guys,

I decided to purchase a Samsung LED monitor and have connected it up to my pc using a HDMI cable. I recieve the picture on the screen but no audio, been spending the majority of today trying to solve the issue but have landed short.

My set up is a AMD A10-5800K APU, 8 GB ram and using windows 7 64 bit. The monitor I purchased is a Samsung LED monitor T32E310EX.

Currently the speaker symbol has an x next to it, when I click it it tries to fix the problem. When I right click it and go to playback device it shows Digital Audio HDMI (High Definition Audio Device) as my default device but no sound bars next to it. If anyone could help me out that would be great thanks

A:New monitor, HDMI connection between Pc and monitor but no sound

Have you configured your speaker setup to use Monitor Speakers rather than external speakers?

1 more replies
Answer Match 65.94%

I installed a internal sound card months ago when my original ports on my PC stopped working. Just recently sound started coming from my monitors built in speakers and not my sound card.
I purchased a new sound card to no avail. I still get static and no sound and control panel says device is working properly.
What is going on it has to be something simple I am looking over.
Help please.
Thanks
Dave

More replies
Answer Match 65.1%

Just got a new monitor today, Samsung S24D300HL which I have plugged into my Nvidia Geforce GTX 745 video card via HDMI.

Picture is great no problems there. However I have no sound at all. I've updated my graphics driver via Nvidia Experience program version 361.43 I've right clicked and went to Nvidia control panel audio tab and my monitor was listed there as audio under HDMI still no sound. I've restarted the computer a couple times. Checked Windows update. Switch to a different HDMI cord and still no sound. I've right clicked the speaker in the taskbar and went to playback and what I have is. Nvidia HDMI Output (Port 0) and Nvidia HDMI Output (Port 1) both say not plugged in. I'm confused about the Port 0 and Port 1 because there is only one HDMI spot on the back of the card.

Any help appreciated.
Thank you

A:New Monitor No Sound from HDMI

Have you set it as default in Sound?

more replies
Answer Match 65.1%

Just got a new monitor today, Samsung S24D300HL which I have plugged into my Nvidia Geforce GTX 745 video card via HDMI.

Picture is great no problems there. However I have no sound at all. I've updated my graphics driver via Nvidia Experience program version 361.43 I've right clicked and went to Nvidia control panel audio tab and my monitor was listed there as audio under HDMI still no sound. I've restarted the computer a couple times. Checked Windows update. Switch to a different HDMI cord and still no sound. I've right clicked the speaker in the taskbar and went to playback and what I have is. Nvidia HDMI Output (Port 0) and Nvidia HDMI Output (Port 1) both say not plugged in. I'm confused about the Port 0 and Port 1 because there is only one HDMI spot on the back of the card.

Any help appreciated.
Thank you

A:New Monitor No Sound from HDMI

Have you set it as default in Sound?

2 more replies
Answer Match 64.68%

Very helpful forum so thanks in advance for addressing this -

I have an Asus laptop running Intel Display Audio and I have it connected to an external monitor via HDMI. I also have external logitech speakers, which for whatever reason, sound a lot better when plugged in to the monitor than the headphone jack of the laptop (which has a much muddier sound). I want to be able to play music when the monitor is off/sleep, however when I do that, obviously the sound turns off. The settings on the monitor were pretty basic and didn't see anything to change it. Is there any workaround?

A:Playing Sound via HDMI When Monitor Is Off

You could get an hdmi switch that separates out the audio. The one linked below is a example, there are cheaper alternatives too.

Amazon.com: Monoprice 4x1 HDMI Switch w/ TOSlink & Digital Coaxial Audio Output (Audio Return Channel/3D/CEC Support): Electronics

3 more replies
Answer Match 64.68%

Despite going through the basic steps in disabling any other playback device but my monitor, I am still having trouble getting any sound on my monitor. I have an Asus VS238H-P and it is plugged from my laptop by a HDMI cable. Here is what I currently have:




Any idea what is wrong? If any additional information is needed, I'd be glad to provide it to you.

A:No sound via HDMI to ASUS Monitor

tnguyen9175 welcome to the Seven Forums.

Is this the monitor?

http://www.asus.com/Monitors_Projectors/VS238H/

If so it doesn't have any speakers in it. What it has is a headphone jack on the back, which would require self powered speakers of headphones to get sound from it.

P.S. You also don't have the driver for the built in audio, as it is showing as "high definition audio device". It would show the proper name of whatever the built in audio is (Realtek, IDT, etc) with the proper driver installed.

1 more replies
Answer Match 64.68%

My problem is that when I connect my Motherboard to my ASUS VS247HR 23.6 Monitor via HDMI,
I get display/video output fine but no sound through its speakers.
Device Manager Screenshot:

Hardware and Sound:

System Specs:





Windows 10 Pro x64
Cooler Master: MasterCase 5
VS Series? VS650 ? 650 Watt Power Supply
GIGABYTE - Motherboard - GA-H170M-D3H
Hydro Series? H55 Quiet CPU Cooler
Intel? Core? i7-6700K Processor (8M Cache, up to 4.20 GHz)
G.SKILL Ripjaws 4 Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM
NVIDIA GeForce GTX 750 Ti
Samsung SSD 850 EVO 500GB
ASUS VS247HR 23.6" Monitor, FHD (1920x1080), 2ms, HDMI, DVI-D, D-Sub
Logitech Media Keyboard & Mouse Combo MK200
D-Link DWA-123 Wireless N 150 USB Adapter Revision D

More replies
Answer Match 64.68%

Hello, i recently purchased a new lg monitor and the sound isn't working on it. I have build in speakers on the monitor, and on the playback devices it says it playing sound but i hear nothing. I tried to used nvidia to fix the problem but nothing working atm any tips?

A:New monitor to hdmi , sound not working

Hi welcome to the forum

could you post a screen shot of the default playback device page.
also could you list make and model of monitor

1 more replies
Answer Match 64.68%

Sometime over the past 3 days i have lost the sound come through the Sync-Master SB550_s27B550v (HMDI) i am at a loss on how to restore the sound.
In the sound setting there is no monitor displayed only Speakers (front headphone jack works). & Realtek Digital Output.
in the Realtek setting i have mute the rear output device, when a front headphone plugged in.
i have also tried to run the sound of the monitor via the front jack and this wont even play sound through the monitor.
I can add any more details, and thanks for any help

Cheers Cassar

A:Loss of monitor sound via HDMI

You should have HDMI listed as a Sound Playback device. Whatever happend apparently removed or disabled that.

To start, go the the Souind Playback panel and RIGHT click in an empty spot in the panel and then LEFT click to show disabled and disconnected devices. If it now shows up you can set it as default and you should get sound back.

However, if its missing, reinstall your video display drivers and that should get it back.

6 more replies
Answer Match 64.68%

hi,

i have an acer aspire revo nettop pc, running winxp sp3
i have great graphics but no audio using an HDMI cable

i feel the monitor (vizio tv) is configured properly, as it works
great (audio and video) with a laptop running win 7

any help? thanks in advance,

sidecar

More replies
Answer Match 64.68%

I've enjoyed a lot of the useful information from you all on this forum. My problem is that when I connect my Acer Aspire 5810T Laptop to my Asus Monitor MT276 via HDMI, I get video on my Asus but no sound through its speakers. I'm getting sound through my laptop though.

I'm unable to see the HDMI sound icon when I use "Manage Audio Devices" even though I checked to show disabled and disconnected devices. I think it may be because of my graphics or sound card (which I've tried updating via device manager but still no luck).

My system specs are to the right and if you require any other information let me know. Any suggestions on how I can get sound through the monitor's speakers?

[SOLVED]

I now get sound and video via HDMI through my Asus monitor. The way I got it to work was by updated my chipset driver to an older version.

Steps I took:
1) Go to Device Manager
2) Open Display Adapters and right click and select Update Driver Software
3) Select Browse my computer for driver software
4) Select Let me pick from a list of device drivers on my computer
5) I then was given a list of drivers and selected the oldest version (2/26/09)

I restarted my computer and plugged in the HDMI and the HDMI icon magically showed up when I went into Playback Devices.

I have updated the OP to show my solution. Thank you all for your help. You guys have a very good community here.

A:No sound via HDMI to ASUS Monitor

Go to the Control Panel/Hardware and Sound and finally the Sound panel. If you have HDMI Audio, there will be an icon for this. Set this as the default playback device and that should get you HDMI Audio.

9 more replies
Answer Match 64.26%

I have a hp pavilion mx70 monitor with side speakers and usually they work perfectly fine with my usual harddrive but I have swapped it over to an NEC Powermate VT harddrive (hp harddrive had the motherboard die on me and i haven't gotten a new one yet)

Anyway, the sound coming through the hp monitor is really soft even though all volumes are turned to max. Is this a problem with the driver for the monitor or is it something to do with the harddrive? I'm really not sure where to even look to find how to fix this problem.

thanks,
jazdrew
 

A:sound through monitor speakers

when you say all volumes do you mean the ones in the volume controls in your computer or on the speakers themselves? what jack do have the speakers connected to on your sound card? in volume controls, if you checked there, did you turn up all the levers, including wave, line in , etc?
 

4 more replies
Answer Match 64.26%

I have sound from a "plugged in" earpiece but nothing from the speakers on the monitor.
My PC is a Packard Bell BL IMED 1519 Media C with O/S XP SP3. I've checked all cable connections
Any help please?
 

A:No sound from monitor speakers

7 more replies
Answer Match 63.84%

Hello again - it's been a long time. I'm working on my Laptop now...

System:

HP dv9330ca laptop running Vista 64-bit. NVidea GE Force 7600 video and Conexant audio. 2GB RAM.

I hooked-up the HDMI cable from the lappy to the TV (Toshiba 32DT2U or 32C110U, not sure) and had no sound through the TV, so I...
Set the sound on the lappy to digital ouput (SPDIF) in Control Panel - still no sound.
Updated video drivers (after google and HP website suggestion)- we have sound (isn't this odd??).
Updated audio drivers - sound is gone (what the...??).
Rollback audio driver - still no sound -.-
Re-install video drivers - we have sound.
Reboot - we still have sound!!
Power down Toshiba display and power back on (left the lappy on and streaming audio and video) - no more sound
Re-install video drivers - still no sound

I have rebooted after all the mentioned steps above. I am making sure that the sound is set to digital in Control Panel but it isn't helping anymore, nor is the re-install of the video drivers. I am thinking that the rollback of the audio driver suggests that I should not try re-installing the newer one, as it seemed previously to cause a conflict.

As always, your suggestions are appreciated.

Thanks in advance!

A:HDMI LOSES sound at monitor power off

** UPDATE...

I did install the newer audio driver and got sound to work. I even re-booted and still had sound. However, when I powered down the system and came back a couple days later, I had no sound again!. Re-installed the audio driver - still no sound.

Any help would be appreciated.

Thanks!!

2 more replies
Answer Match 63.84%

Hey all,

So I recently just picked up a new 27" Samsung Monitor, here is the link: http://www.amazon.com/Samsung-S24D5...=UTF8&qid=1427052003&sr=1-4&keywords=s27e390h

For some reason I can't get the sound to work. It's hooked up via an HDMI cable to my Nvidia Geforce 750 TI GPU. This is the same HDMI cable that was used with my old monitor and there was no issues at all.

Though for some reason it's just not working for this monitor? I've made sure all drivers were installed, the monitor was set as default in sound control panels, tried all of the available options there in terms of default (HD audio device, digital audio, my monitor, etc) but I can't seem to get it to work..

Any ideas??

The green sound level bars are going up and down but nothing is just coming out of the speakers, so I'm not sure

Thanks guys. Very stressful.
 

A:New HDMI Monitor -- No Sound? Advice Appreciated!

Hi CoryARamirez, and welcome to TSG.

Are you talking about amplified speakers plugged into the headphone jack on the monitor? As far as I can tell, the monitor itself does not have built-in speakers.

http://downloadcenter.samsung.com/content/UM/201412/20141230174041127/BN46-00444A-Eng.pdf

http://www.amazon.com/built-in-spea...m_cd_ql_tlc_al?_encoding=UTF8&asin=B00IEZGYI0
 

1 more replies
Answer Match 63.42%

Ok I'm either doing something completely stupid or my speakers just do not work.

I have my monitor connected to my gpu via displayport and have the monitor set to default device under sound playback but still no sound. When I try and play some audio I can see the little sound bar move up and down but nothing from the speakers.
Same problem also happens when I plug my headphones directly into monitor.

Every other method works just fine.

More replies
Answer Match 63.42%

My boss just bought an Hp w2207h, 22'' monitor. Built in speakers on monitor plug directly into back of desktop, but no sound

His previous external speakers work just fine, and when the monitor is plugged into another computer it works just fine.

I should mention that this is all on a brand new computer which I don't have the spec's for, but could get if needed.

Thanks in advance
 

More replies
Answer Match 63.42%

My computer monitor has built in speakers. They use to work fine and all of a sudden I can't hear sound out of my monitor speakers. I have speakers that I can hook-up to my computer, and when I connect them the sound works fine, but if I choose not to connect the speakers and just use the monitor speakers like before. I can't get any sound. I recently upgraded from Windows Vista to Windows 7. I'm wondering if that has something to do with it. I've ran all types of sound checks and I don't have any errors on my sound...but just can't get the sound coming from my monitor anymore. Can you please advise what you think the problem may be?

Windows Edition: Windows 7 Ultimate
Manufacturer: Hewlett-Packard
Processor: AMD Athlon(tm) 64x2 Dual Core Processor 3800 + 2.00GHz
System type: 32-bit Operating System


Thanks in advance,
mrzmoore40

A:No sound coming from monitor speakers

There is a cable running from the monitor to the Sound output on the back of the computer. Is the cable plugged into the monitor? Is the cable plugged into the Green audio out port of the computer?

1 more replies
Answer Match 63.42%

Hello

I have a Dell 3847 desktop running Win 8.1 My monitor is an HP W2072a with two internal speakers. I originally hooked pc to monitor with a vga cable and plugged the sound cable into the audio out on the pc. I went through the system check and it recognized the speakers and when I checked for latest drivers it said they were already at the latest. I made surfe speakers on the pc and the monitor were set high. Could not get any sound through the system sound effects tests.

I then hooked the pc up to my desktop external speakers and all was well! So the sound card works! I did not use the audio cable that came with the monitor. Could it be bad? I doubt it.
e
Checked with HP support and a not very knowledgeable guy said to get sound I needed to go DVI instead of vga. My pc has only vga and hdmi so I took a cable that went hdmi on the pc to dvi on the monitor and no sound again.

Any ideas?

Rbuck
 

A:Solved: No sound through monitor speakers

You've marked your thread as Solved, what was the resolution?
 

1 more replies
Answer Match 63.42%

Hi Gents,

Here I am again with a strange problem:-(

When I connect my speakers to the Headphones jack at my PC I can't
hear any sound any more.
Win7 pro reports no errors.
When I start from a Ubuntu LiveCD it works fine.

Any Ideas

Thanks

A:I can hear sound only from the Monitor speakers

Hi.

When you plug in your headphones make sure they are not muted. In the bottom right of the screen click on your speakers icon. Worth a shot especially if they work in Ubuntu.

If that is correct then right click on the icon and then click on 'Volume Control Options' and make surethe settings are correct for your headphones.

9 more replies
Answer Match 63.42%

Just bought a Packard Bell Maestro 240 LED white. It has built in speakers, but i don't hear any sound? It shows up in sound>playback and i have checked sound levels etc. All the required drivers are installed, and my headset works? There is no 3.5mm input on the monitor, but i'm using a HDMI cable, and HDMI cable can "transfer?" sound. Anyone who can help me? I'm using windows 7 64-bit
 

A:Monitor with built in speakers - no sound?

have a look at
control panel>
sound>
is HD audio selected

can we see a screen shot
To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.
Full details are here http://library.techguy.org/wiki/TSG_Posting_a_Screenshot
 

3 more replies
Answer Match 63%

Hello, i updated nvidia drivers yesterday i think and now today when i made playback sound on the lcd tv that i have connected trough hdmi to my gpu it doesn't play sound...

Every other device is working, etc 1 monitor have built in speaker, regular speakers and headset. They all working fine but whenever i try to playback for the TV it doesn't work.

I've tried to change the HDMI to a other port on the tv but doesn't work... I've checked that i haven't muted the TV.
Still nothing, i guess this has to have something to do with the update i made yesterday?
Though i'm pretty sure the sound worked after the update as i've watched tv with sound on it after the update... however now it's just gone. Could it be because it went to sleep then i went back to the pc and (it was in hibernation mode) then toggled back but no sound on the tv...
http://prntscr.com/b01iqt
http://prntscr.com/b01itn
http://prntscr.com/b01j2u

Thanks in advance
 

More replies
Answer Match 63%

How do I disable my LG Monitor from automatically shutting off and starting the sound channel
when the sound channel is silent or muted.

I have an HDMI LG monitor with an AMD Video card.
I run my sound output from the AMD video card HDMI cable into the LG Hdmi monitor.

The audio works perfectly in all situations, except for the fact that, when there is no sound signal present
(" Muted or silent " ) the device temporarily disables until the next time sound plays, then it re-enables correctly.

the problem is it takes about .5 to 1. seconds to re-enable. which is annoying as FFFF sometimes. when Im playing 1 second long sound clips. the clip is over before the signal re enables. then turns off again as soon as the sound is over.

-------

It could be an AMD issue (considering that the sound runs via the hdmi cable out of the AMD card.)
or it could be an LG issue. Both decent companies. I bet its an LG Flaw (that will not exist on newer models.

A:Hdmi Monitor sound / auto shut off - on (ANNOYING)

This sounds like an issue with the AMD video card's sound or even deeper a PC issue. What are the 1 second sound clips? Does this happen with ALL sound or only certain sounds or from certain media players or games?

What do you have listed in the Device Manager for the Sound? Do you show the AMD HDMI and whatever PC sound card you have? and nothing else or do you also show other items.

Filling in the "My System Specs" helps those trying to help you with problems.

1 more replies
Answer Match 63%

I wanted a break from the HDMI sound through the monitor to use headphones, and after several other methods, I tried disabling the HDMI sound. That worked great, but now that option for playback device is completely gone! How do I get it back so I can use the (admittedly weak, but still functional) monitor sound?
 

A:Solved: Windows 7 HDMI sound through Acer monitor

Go to Control Panel > Sound. In the Sound popup screen, right-click on the screen and select "Show Disabled Devices".
 

3 more replies
Answer Match 63%

My Dad just bought a new ACER flat panel monitor to replace an existing ACER flat panel monitor. The old model had built in speakers the new one does not. I can not get any noise out of the external speakers. Please Help I'm leaving for vacation and I'M desperate
 

A:New ACER monitor, no sound from external speakers

7 more replies
Answer Match 62.58%

Hi, I can't seem to get anything higher than 1920x1080 in the list of available resolution options when I connect my Dell U2713HM monitor to my Dell Inspiron 15 laptop. I've run this monitor at 2560x1440 on another laptop over HDMI in the past but that was with Windows 8. The Intel HD Graphics 530 Control Panel doesn't offer any resolutions above 1920x1080 for the external monitor and adding custom resolutions results in the error "the custom resolution exceeds the maximum bandwidth capacity". I'm using the same high speed HDMI cable that worked at 2560x1440 with this monitor on my previous laptop. I'm fully up to date on all of the drivers for the laptop.
Does anyone have any suggestions? I'm not sure what else to try. Could this be a Windows 10 issue? Should I try the standard Intel HD Graphics 530 drivers from the Intel website?

A:Dell Inspiron 15 7559 connected to Dell U2713HM monitor over HDMI can't do 2560x1440 resolution in Windows 10

Hi JonoBloo,
The hardware on the system supports the 2560x1440. It should be a software issue. I would suggest you to uninstall and reinstall the video card driver from Dell website as these drivers are tested on the Dell system. Please follow the steps mentioned below to uninstall the video card.

Press the Windows key and Start typing devmgmt.msc and then press enter.
Select the Display adapters listed and right click on it.
Now select properties.
In the properties window, under Driver tab, click on Uninstall button.
Check “Delete the driver software for this device.”
You want to delete the driver click OK.

After the uninstall finishes restart the system. Then reinstall the Intel video card driver for issue resolution. Please enter your service tag # on the link below, select the OS, then download the video card drivers from Video section onto the system and install it.
http://dell.to/18r60nI
Please let me know if this helps.

1 more replies
Answer Match 62.58%

ok so i bought my xbox 360 and then i was wondering where i should put the RCA red and white cables to since there is no place to put them in my monitor. i also have a 5.1 logitech surround sound system. is there anyway where i can have sound my 360 out of the surround sound?
 

A:xbox 360 connected to monitor and no sound!!! HELP

THe red and white cables are for sound, i presume by monitor you mean a pc monitor which most dont have sound. Can u plug the red and white into your Logitech surround system ? if there are different sockets on it you may be able to buy an adaptor in an electical store to do this.
 

2 more replies
Answer Match 62.16%

Hi there, I have a mercer monitor with speakers attached but there appears to be no sound being emitted from the speakers. However when i connect my head phones it works fine. I tried connecting the monitor to another computer but it still did not work. I know i could not have blown the speakers but what else could it be. Please could you email on [email protected].
 

A:Mercer monitor TJ677 with speakers attached no sound

Did you tried pluging the speaker directly in your computer, in the back of the computer you have a little green hole in which you need to plug in your speakers.
 

1 more replies
Answer Match 62.16%

Hi

Basically i've just got my new laptop this week, had desktop pc's for nearly 10 yrs with internal sound card to power a 5.1 surround system

now ive ordered some krk rokik rp5 g2 monitor speakers but i want to be able to play music from laptop with media player etc, through the monitor speakers at good sound quality.

i no your can get cheap converters, but i imagine a usb sound card with rca outputs would be a lot better yes?

budget around ?70 or so. heard creative aint that good for music, more gaming, films, and been told m-audio or tascam are good for audio.

any1 else recommend decent soundcards etc

cheers

Matt

A:external sound card advice for use with monitor speakers

I have a recording studio. I use Focusrite (British Company) recording interface unit and also drives my Samson Resolv studio monitors and headphones.

Actually, I would try the built in sound module (card) first before buying any add on sound unit. You will be surprised at the improvement in internal sound modules are compared to what they used to be.

2 more replies
Answer Match 62.16%

Hi, 

I just bought a Dell 22" HD monitor (Model - S2216H) and there are 2 integrated speakers installed at the bottom of the monitor which are not working. I have already run the set up CD and tried other things too. I have installed Windows 10 on my PC. Any suggestions so that I can get these integrated (2X3 Watts) speakers working?

A:No sound from the integrated speakers of my Dell HD monitor S2216H

You have to connect the monitor to your sound card or connect using HDMI cable. Speakers do not work without an audio signal from the computer. Your monitor has Audio In (and Audio Off so check that in the instructions) and HDMI that can handle picture and sound. DVI and VGA do not have sound and require separate audio cable.
It is important to mention your model computer and how the monitor is connected to the video card.

2 more replies
Answer Match 62.16%

on 2/17/16 [Personal information removed] and again on 2/26/16 had live chats with HP to correct the issue with no longer getting sound thru my HP 750-114 to my Dell Monitor S2415H.   Sound thru the monitor works perfectly until I use some of my programs or an upload appears.  Both times the HP tech had to uninstall sound driver and reinstall the driver.  Each time I spent at least 1.5 hours on live chat while they corrected the issue.  The last correction lasted less than 24 hours and the red X at the speaker on the task bar appeared which told me to connect external speakers.  The sound works with external speakers connected but I am not happy with that solution as originally it worked fine for at least two months using my monitor. The last technician even had my dell monitor set as the default sound monitor. Even with the external speakers plugged in if I insert a CD I do not get any sound!!!!!. I am extremely frustrated with HP and Windows 10 regarding this on going issue.  My last HP has less problems over the 6 years I had it compared to this new computer.  Unfortunately I know just enough to get myself in trouble with the computer so unless I get step by step instructions I am reluctant to uninstall the driver and re install the sound driver myself. FRUSTRATED BEYOND BELIEF!! Regards, Bobby-left

A:Sound keeps switching to external speakers from monitor spea...

Hi @Bobby-left, I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.If you are unfamiliar with how the Forum's private message capability works, this post has instructions.

1 more replies
Answer Match 62.16%
A:Sound plays through monitor speakers while headphones are plugged in

Have you tried changing it in control panel sound, or possibly through any sound package that might have been installed with the driver.

8 more replies
Answer Match 61.74%

Had to replace motherboard from authorized acer parts dealer now I get no sound through HDMI port. I did through the original board until it got fried by electrical surge. Can any one help or send me a picture of the inside the same model to make sure all jumpers on the motherboard are in the right spot. Or if any one else had this problem tell me how you fix it. It does not have HDMI sound icon in the mixer. What I have done:
1. I have looked for disabled devices.
2. Tried looking in sound mixer settings for the default audio.
3. New install and drivers.
4. Tried a system utility software RegInOut. Looking for serious replies on fix even if it was not an Acer.

specs:
AMD Athlon II X4 Quad-Core Processor 640,
Windows 7 Home Premium,
NVIDIA GeForce 9200 Chipset, NVIDIA GeForce 9200 Graphics Integrated ,
4096MB DDR3 Memory,
1TB SATA Hard Drive (Green Product ? variable RPM),
16X DVD?R/RW SuperMulti Drive,
Multi-in-1 Digital Media Card Reader,
802.11b/g/n Wireless,
High Definition Audio with 5.1-Channel Audio Support,

Any help appericated

A:NO SOUND TROUGH HDMI ON ACER AX3400-U3032 and No HDMI Icon in sound se

Welcome to the Seven Forums

One thing you could try is to open up the Control panel then click on Sound and then go to the Playback tab and see if there is anything in there to enable it that's what I had to do on my laptop.

Jerry

9 more replies
Answer Match 61.32%

While playing some games like Left 4 Dead 2, Fallout New Vegas and Age of Empires III Asian Dynasties, the computer crashes and I have to press and hold the power button for it to turn off. It happens frequently in AoE III Asian Dynasties and never happens in Team Fortress 2 for example.

The screen goes black and the monitor light starts blinking, and the speakers make a really annoying loud buzzing sound.

I've tried everything, various video card drivers, disconnected all USB devices, clean OS installs with no extra software on the background...

The PC is ~3 years old.
Windows 7 SP1 64 bits
I've had BSODs before but not since the last format.

I found this thread using Google, looks similar.

A:Monitor goes black and speakers make loud buzzing sound

Your symptoms reek of hardware failure. My initial suspicion is your video card. Though let's run through some testing.

First thing's first: some initial troubleshooting. Check inside your PC for any dust or slow/stopped fans. Ensure that proper airflow is taking place (cold outside air in, hot inside air out). While you're inside, go ahead and re-seat your video card, as well as your memory sticks, and reconnect your drives' power and data cables (both drive and motherboard ends). Check things after all of this, and see if the issue has been resolved or has been very noticeably reduced. If not resolved, continue onward.

Before the testing, we'll want a couple HWinfo logs from ya. Set it to Sensors only at startup, then have it log two instances: one for idle, and one for high load (gaming, etc.). Make sure each log records a decent amount of time (~15 minutes). So we can get some good solid averages and discover trends going on.

Once that's done, on to the hardware diagnostic tests:

GPU: MemtestG80/CL - If your video card supports either of the tests, run twice.
RAM: Memtest86+ - Run 7+ passes.
CPU: Prime95 - Torture Test, Large FFTs, 9+ hours.
Disk: Seatools - All basic tests. No Fix all or advanced ones.

Note that these tests (besides MemtestG80/CL) are available on the UBCD. It's also preferable you run them on there as it offers a light, reliable environment to run them on. Note that Prime95 is called Mersenne Prime Test in the UB... Read more

15 more replies
Answer Match 61.32%

The sound only works with headphones, but not without.
Have HDMI cable connected, which should support it.
I've tried many sites and many proposed solutions but they didn't work for me. Please help.

A:Dell 27 Gaming Monitor - S2716DG not playing any sound through speakers

Bump
pls help

1 more replies
Answer Match 60.06%

ok so i got a new compaq pc and my old polkaudio speakers wont work! does anyone no what the problem is? i no that they are connected properly, and the volume is cranked to the fullest and all sounds still play quietly. the speakers worked properly on my old pc though.
 

A:speakers not working properly, sound is very low, connected properly, please help!

I think...

1.You may have accidently adjusted you sound configuration settings.
2.You may not have the correct sound Drive (Or none at all). If so check your sound card and browse the web for installable driver (The acctual drivers don't cost anything)
 

5 more replies
Answer Match 58.8%

Hi there, My sound is not working. I only have a HDMI Sound output. However, I don't have any HDMI Output in my computer. I reinstalled windows a couple of times lately, but i don't know for sure if thats the problem.
Right now im using Windows 7 32-Bit, My hardware specs are: CPU: Intel Duo 2 Core. Graphics Card: AMD ATI Radeon HD 3800 Series. Any help or such will be Very much appreciated

A:Sound not working, Only have HDMI Sound Output, But no HDMI port in PC

the HDMI sound is most likely off your GPU but that series seems to not have a HDMI port so that is odd. If you can make sure your onboard audio is on in your BIOS and also run the tool on this page so that you can update all your system info for us. System Info - See Your System Specs

3 more replies
Answer Match 57.96%

Hi everyone.
I have an Alienware 15 R2 (i7 4720HQ, 970M, 16GB, FHD) running windows 10.
I have set it up in desktop mode by connecting it to ASUS MG28UQ 4K monitor, mouse and keyboard. The monitor is connected through the laptop's mini dp port.
The problem is that when I boot up the laptop with the monitor connected, the laptop's internal sound card (SoundBlaster Redcon 3di) does not function, and is not available in the audio playback devices menu. The intel display audio works, though.
But when i shut down the laptop, disconnect the monitor, and then boot it back up, the sound card is detected and functional, and stays funtional even after i connect the monitor to laptop after it has booted. It keeps working until i reboot, after rebooting the same thing happens.
Any ideas what might be going wrong?

Things i tried:
reinstalled sound card driver
windows troubleshoot

Thanks in advance  

A:Sound Card not detected when laptop boots up with external monitor (mini dp) connected - Alienware 15 R2 (4720HQ)

First, make sure that the display audio device is not 'disabled' in Device Manager. When connected through HDMI this should be enabled. If it is disabled, try enabling it and see if that resolves the problem.

Second, I would suggest downloading the latest graphics drivers from Intel. This should also update the HDMI audio drivers, and may fix the problem. You may also need 4th Generation or later CPU graphics drivers. You may want to download Intel's driver updater, to automatically search for drivers.

1 more replies
Answer Match 57.54%

Hi guys, just reinstalled windows 7. everything works great, then I went to paly a file and to my surprise, no sound. Tested speakers on another device, they work. Sound card drivers are working and up to date.

When I play a media file, I can see the sound gage go. So I went in sounds, playback device, and all I see in there is my sound card, no speakers or headphones icon. Thus no sounds from speakers. Tried other headphones/speakers they also dont work on the PC.

First two screenshots are my Device Manager, third one shows my playback devices.. My wife needs this for her business and I am losing sleep over this for days now I tried everything. Any ideas?

http://img688.imageshack.us/img688/2205/screen2tv.png
http://img843.imageshack.us/img843/4980/screen1md.png



http://img13.imageshack.us/img13/5256/nospeaker.png

A:Windows 7 SOUND, No Speakers in Playback device, thus no sound from speakers

Hi -

What sound card do you have?

Double-click on the HD audio device in Device Manager - what is driver and date?

Usually there is an audio codec/ drivers, e.g., IDT, Realtek, etc... that must be installed.

What are system specs - exact model number from label on back of PC, please.

Regards. . .

jcgriff2

`

2 more replies
Answer Match 55.44%

I have a video card with both a DVI and an HDMI output and a monitor with only an HDMI input. Should I connect my monitor to my PC with an HDMI cable or with a DVI - HDMI cable?

A:Should I use an HDMI or HDMI-DVI cable to connect to my monitor?

Hdmi

4 more replies
Answer Match 55.44%

Hi,

I have an Asrock ION 330 HT BD with a Sony Bravia 720p attached (HDMI to HDMI). When I start up my PC, the screen remains black. Only after I plug in a second monitor, both screens work just fine. When I pull the second monitor out, the Bravia also stops getting a signal. Seems a bit weird.. How can I get it to work with just the Bravia attached?

Thanks,
Gijs

A:HDMI to HDMI only working with second monitor attached

Hi and welcome to the forum.

Have you made sure your graphics card driver is up to date?

Have you tried starting your PC up in safe mode and seeing if the problem still persists?

Please ensure you have done both of these and then post back; it would also be helpful if we knew your system specifications which you can fill in under 'User CP'.

Also does the task bar appear on the primary monitor or secondary monitor?


Oli

9 more replies
Answer Match 55.02%

After connected my dell XPS 13 with Dell 34" ultra monitor via Kensington SD4000 universal docking station. Have video but no sound coming out from my ultra wide monitor. The only sound that I heard was from the XPS laptop. My Laptop's OS is window 10 and I tried to use Chrome and explorer Edge, none of the search engine is able to solve the problem. Moreover, I checked my all connective cables to/from the docking station and it seems fine to me. Please help!!!!!!!!!!!!

More replies
Answer Match 55.02%

I just purchased a HP 2009M monitor and wonder if I could utilize separate speakers instead of the built-in speakers?
 

A:Solved: Can I use separate speakers but have built-in speakers in the monitor

Yes; just plug your speakers into the output from your soundcard.
 

3 more replies
Answer Match 54.6%

With Dell Support Assist microphone test -- earphone playback is good, on-board speaker is terribly scratchy. The sound card lists as "ATI high Definition Audio Device" and "IDT High Definition Audio CODEC."
The laptop is Dell Studio 15 (1555) running windows 7 Professional, 236GB used, 214GB free space, Intel P8700 2.53 GHz Processor, 64 bit OS, 4GB memoryThe built-in speakers used to sound good but now they are too scratchy to understand. However the headset and external speakers (both 3.5 mm jack interface) sound good and a HDMI connected projector sounds good.
I will appreciate advice.

A:On-board speakers are scratchy but external speakers & headphones sound good?

Hello. As a test, switch from the IDT audio driver to the Windows native audio driver.
1. Open the Device Manager (find it in the Control Panel, or type devmgmt.msc into the search box).2. Expand the "Sound, video & game controllers" and right click on "IDT High Definition Audio Device".3. Select to "Update Driver Software".4. Click on "Browse my computer for driver software".5. Click "Let me pick from a list of drivers on my computer".6. Put a check in the box "Show compatible hardware" if not already checked.7. In the list of devices, click "High Definition Audio" (the native driver).8. Click "Next".9. On the Update Driver Warning box, click "Yes" (install the driver). 10. Restart the laptop if prompted. If not prompted, then no need to restart.[To get back to the IDT driver, do it again but reverse the names in steps 2 and 7.]
If you get the noise while using the native driver then it is not a driver issue, which would mean there is a strong chance of speaker failure, particularly since the noise is not in headphones. If you would like to replace the speakers I can point you to the service manual.

1 more replies
Answer Match 54.6%

I cant get these things to work together I think I just dunno what Im doing..

Installed my PCI card and setup my speakers and plugged em in etc.. Installed the drivers for 7.1 sound as the instructions suggested for me to do, even though my speakers are actually 5.1 (Logitech X-530) wonder if thats whats wrong...anyway

now my woofer works and so do my front two speakers but my other 3 are left out..what to do?

Thanks all!
 

A:Chaintech AV710 Sound Card and Logitech 5.1 Speakers: only 2 speakers work

I'd say install the 5.1 drivers and be sure the speakers are plugged into the correct ports
 

3 more replies
Answer Match 54.6%

This is what I heard. You can use matrix mode and when playing music, still get sound from all 5 speakers without a 5.1 card
 

A:Logitech Z5300 speakers: Doesnt require 5.1 sound card to run from all 5 speakers?

16 more replies
Answer Match 54.18%

Hey, I've been looking for help for this for 2 days straight and still haven't found any help.

Basicly about 3 or 4 weeks ago, my motherboard or graphics card went, i had the computer repaired and it arrived a few days ago.

I've plugged it all in but i can't get any sound.
I've changed my Bios, uninstalled and reinstalled drivers, did some roll backs, plugged in the S/pdif cable altered my properties and still no luck.

Can anyone help me?

The screen shot below is of what my Playback Devices panel looks like when iTunes is on.
I'll give any information i can.
 

A:HDMI to HDMI, Great Picture, no sound. Need Help.

9 more replies
Answer Match 54.18%

Hey, DejaVu420 here.

I just bought a brand new 32 Inch flat screen HD TV to use as my PC monitor, and it just happen to come with a pair of very nice built in speakers. I currently have another pair of homemade speakers (12 inch sub w/ 2 satilites) wired to plug into the back of my PC, using just the good ol lil green hole. Now this works perfectly fine, sh*t bumps, and the HDMI speakers operate perfectly fine as well, when i have either or selected in the windows Vista "Sound" device list.

My question is, is there ANY way at all, that i can get the HDMI speakers to operate in unison with my PC speakers?

I cant wire them together... so im thinking of some type of program that could output to HDMI and analog at the same time? Basicly i need to use the "Speaker" playback device in unison with the "ATI HDMI Output" playback device.

Wish windows would just make this an option...

Thanks for the help!
 

A:HDMI and Speakers

6 more replies
Answer Match 53.76%

Hi,

So eagerly i tought to buy this cool looking laptop for a huge $2000 i needed it to output to a hdmi monitor ot TV so sometimes i could see movies as well, now i had to buy the special DA200 dell adaptor and in the past 3 weeks it`s been a complete nightmare, i WAS NEVER ABLE to make it work permanently. The chat support was no help at all usually simply resuming to try and replace the part but i do think the part is good and i didn't feel like waiting 2 weeks for it to ship from china.

The ethernet and usb work on the DA200 adaptor , EXCEPT HDMI.  SOMETIMES it would work briefly until next restart, i had tried everything ever available on the internet. The laptop is running Windows 10 (as it`s restricted to that version, i tried to install other versions with lots of issues and compatibility issues) so  i have installed reinstalled and installed different versions of the video driver for all possible windowses and none worked. what did work was very brief until next restart and that usually happened when i had a fresh windows install, after the first restart i will get a non working hdmi again.  

I have tried several hdmi cables so i know it`s not the hdmi cable or the tv ot the monitor. and nobody seems to be able to help!!

A:dell xps 13 9450 (2015 new version) does not output HDMI to tv or monitor via special dell DA200 Hdmi adaptor

Oops I see my first post got sent, even if the website failed...
Anyay.. I talked to Dell Support and they told me to update the firmware for:
Intel (R) Thunderbolt 3 Firmware Update
(version 02.05.04,A00)
downloaded forn Dell.com/support
Enter your service tag and you will find it under Chipset on the driver download page.
That fixed it for me!
It was a known issue for the guy i talked to.

9 more replies